arch/powerpc/kernel/entry_64.S

   1 /*
   2  *  PowerPC version
   3  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
   4  *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
   5  *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
   6  *  Adapted for Power Macintosh by Paul Mackerras.
   7  *  Low-level exception handlers and MMU support
   8  *  rewritten by Paul Mackerras.
   9  *    Copyright (C) 1996 Paul Mackerras.
  10  *  MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
  11  *
  12  *  This file contains the system call entry code, context switch
  13  *  code, and exception/interrupt return code for PowerPC.
  14  *
  15  *  This program is free software; you can redistribute it and/or
  16  *  modify it under the terms of the GNU General Public License
  17  *  as published by the Free Software Foundation; either version
  18  *  2 of the License, or (at your option) any later version.
  19  */
  20
  21 #include <linux/config.h>
  22 #include <linux/errno.h>
  23 #include <asm/unistd.h>
  24 #include <asm/processor.h>
  25 #include <asm/page.h>
  26 #include <asm/mmu.h>
  27 #include <asm/thread_info.h>
  28 #include <asm/ppc_asm.h>
  29 #include <asm/asm-offsets.h>
  30 #include <asm/cputable.h>
  31
  32 #ifdef CONFIG_PPC_ISERIES
  33 #define DO_SOFT_DISABLE
  34 #endif
  35
  36 /*
  37  * System calls.
  38  */
  39         .section        ".toc","aw"
  40 .SYS_CALL_TABLE:
  41         .tc .sys_call_table[TC],.sys_call_table
  42
  43 /* This value is used to mark exception frames on the stack. */
  44 exception_marker:
  45         .tc     ID_72656773_68657265[TC],0x7265677368657265
  46
  47         .section        ".text"
  48         .align 7
  49
  50 #undef SHOW_SYSCALLS
  51
  52         .globl system_call_common
  53 system_call_common:
  54         andi.   r10,r12,MSR_PR
  55         mr      r10,r1
  56         addi    r1,r1,-INT_FRAME_SIZE
  57         beq-    1f
  58         ld      r1,PACAKSAVE(r13)
  59 1:      std     r10,0(r1)
  60         std     r11,_NIP(r1)
  61         std     r12,_MSR(r1)
  62         std     r0,GPR0(r1)
  63         std     r10,GPR1(r1)
  64         ACCOUNT_CPU_USER_ENTRY(r10, r11)
  65         std     r2,GPR2(r1)
  66         std     r3,GPR3(r1)
  67         std     r4,GPR4(r1)
  68         std     r5,GPR5(r1)
  69         std     r6,GPR6(r1)
  70         std     r7,GPR7(r1)
  71         std     r8,GPR8(r1)
  72         li      r11,0
  73         std     r11,GPR9(r1)
  74         std     r11,GPR10(r1)
  75         std     r11,GPR11(r1)
  76         std     r11,GPR12(r1)
  77         std     r9,GPR13(r1)
  78         crclr   so
  79         mfcr    r9
  80         mflr    r10
  81         li      r11,0xc01
  82         std     r9,_CCR(r1)
  83         std     r10,_LINK(r1)
  84         std     r11,_TRAP(r1)
  85         mfxer   r9
  86         mfctr   r10
  87         std     r9,_XER(r1)
  88         std     r10,_CTR(r1)
  89         std     r3,ORIG_GPR3(r1)
  90         ld      r2,PACATOC(r13)
  91         addi    r9,r1,STACK_FRAME_OVERHEAD
  92         ld      r11,exception_marker@toc(r2)
  93         std     r11,-16(r9)             /* "regshere" marker */
  94 #ifdef CONFIG_PPC_ISERIES
  95         /* Hack for handling interrupts when soft-enabling on iSeries */
  96         cmpdi   cr1,r0,0x5555           /* syscall 0x5555 */
  97         andi.   r10,r12,MSR_PR          /* from kernel */
  98         crand   4*cr0+eq,4*cr1+eq,4*cr0+eq
  99         beq     hardware_interrupt_entry
 100         lbz     r10,PACAPROCENABLED(r13)
 101         std     r10,SOFTE(r1)
 102 #endif
 103         mfmsr   r11
 104         ori     r11,r11,MSR_EE
 105         mtmsrd  r11,1
 106
 107 #ifdef SHOW_SYSCALLS
 108         bl      .do_show_syscall
 109         REST_GPR(0,r1)
 110         REST_4GPRS(3,r1)
 111         REST_2GPRS(7,r1)
 112         addi    r9,r1,STACK_FRAME_OVERHEAD
 113 #endif
 114         clrrdi  r11,r1,THREAD_SHIFT
 115         ld      r10,TI_FLAGS(r11)
 116         andi.   r11,r10,_TIF_SYSCALL_T_OR_A
 117         bne-    syscall_dotrace
 118 syscall_dotrace_cont:
 119         cmpldi  0,r0,NR_syscalls
 120         bge-    syscall_enosys
 121
 122 system_call:                    /* label this so stack traces look sane */
 123 /*
 124  * Need to vector to 32 Bit or default sys_call_table here,
 125  * based on caller's run-mode / personality.
 126  */
 127         ld      r11,.SYS_CALL_TABLE@toc(2)
 128         andi.   r10,r10,_TIF_32BIT
 129         beq     15f
 130         addi    r11,r11,8       /* use 32-bit syscall entries */
 131         clrldi  r3,r3,32
 132         clrldi  r4,r4,32
 133         clrldi  r5,r5,32
 134         clrldi  r6,r6,32
 135         clrldi  r7,r7,32
 136         clrldi  r8,r8,32
 137 15:
 138         slwi    r0,r0,4
 139         ldx     r10,r11,r0      /* Fetch system call handler [ptr] */
 140         mtctr   r10
 141         bctrl                   /* Call handler */
 142
 143 syscall_exit:
 144         std     r3,RESULT(r1)
 145 #ifdef SHOW_SYSCALLS
 146         bl      .do_show_syscall_exit
 147         ld      r3,RESULT(r1)
 148 #endif
 149         clrrdi  r12,r1,THREAD_SHIFT
 150
 151         /* disable interrupts so current_thread_info()->flags can't change,
 152            and so that we don't get interrupted after loading SRR0/1. */
 153         ld      r8,_MSR(r1)
 154         andi.   r10,r8,MSR_RI
 155         beq-    unrecov_restore
 156         mfmsr   r10
 157         rldicl  r10,r10,48,1
 158         rotldi  r10,r10,16
 159         mtmsrd  r10,1
 160         ld      r9,TI_FLAGS(r12)
 161         li      r11,-_LAST_ERRNO
 162         andi.   r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
 163         bne-    syscall_exit_work
 164         cmpld   r3,r11
 165         ld      r5,_CCR(r1)
 166         bge-    syscall_error
 167 syscall_error_cont:
 168         ld      r7,_NIP(r1)
 169         stdcx.  r0,0,r1                 /* to clear the reservation */
 170         andi.   r6,r8,MSR_PR
 171         ld      r4,_LINK(r1)
 172         beq-    1f
 173         ACCOUNT_CPU_USER_EXIT(r11, r12)
 174         ld      r13,GPR13(r1)   /* only restore r13 if returning to usermode */
 175 1:      ld      r2,GPR2(r1)
 176         li      r12,MSR_RI
 177         andc    r11,r10,r12
 178         mtmsrd  r11,1                   /* clear MSR.RI */
 179         ld      r1,GPR1(r1)
 180         mtlr    r4
 181         mtcr    r5
 182         mtspr   SPRN_SRR0,r7
 183         mtspr   SPRN_SRR1,r8
 184         rfid
 185         b       .       /* prevent speculative execution */
 186
 187 syscall_error:
 188         oris    r5,r5,0x1000    /* Set SO bit in CR */
 189         neg     r3,r3
 190         std     r5,_CCR(r1)
 191         b       syscall_error_cont
 192
 193 /* Traced system call support */
 194 syscall_dotrace:
 195         bl      .save_nvgprs
 196         addi    r3,r1,STACK_FRAME_OVERHEAD
 197         bl      .do_syscall_trace_enter
 198         ld      r0,GPR0(r1)     /* Restore original registers */
 199         ld      r3,GPR3(r1)
 200         ld      r4,GPR4(r1)
 201         ld      r5,GPR5(r1)
 202         ld      r6,GPR6(r1)
 203         ld      r7,GPR7(r1)
 204         ld      r8,GPR8(r1)
 205         addi    r9,r1,STACK_FRAME_OVERHEAD
 206         clrrdi  r10,r1,THREAD_SHIFT
 207         ld      r10,TI_FLAGS(r10)
 208         b       syscall_dotrace_cont
 209
 210 syscall_enosys:
 211         li      r3,-ENOSYS
 212         b       syscall_exit
 213
 214 syscall_exit_work:
 215         /* If TIF_RESTOREALL is set, don't scribble on either r3 or ccr.
 216          If TIF_NOERROR is set, just save r3 as it is. */
 217
 218         andi.   r0,r9,_TIF_RESTOREALL
 219         beq+    0f
 220         REST_NVGPRS(r1)
 221         b       2f
 222 0:      cmpld   r3,r11          /* r10 is -LAST_ERRNO */
 223         blt+    1f
 224         andi.   r0,r9,_TIF_NOERROR
 225         bne-    1f
 226         ld      r5,_CCR(r1)
 227         neg     r3,r3
 228         oris    r5,r5,0x1000    /* Set SO bit in CR */
 229         std     r5,_CCR(r1)
 230 1:      std     r3,GPR3(r1)
 231 2:      andi.   r0,r9,(_TIF_PERSYSCALL_MASK)
 232         beq     4f
 233
 234         /* Clear per-syscall TIF flags if any are set.  */
 235
 236         li      r11,_TIF_PERSYSCALL_MASK
 237         addi    r12,r12,TI_FLAGS
 238 3:      ldarx   r10,0,r12
 239         andc    r10,r10,r11
 240         stdcx.  r10,0,r12
 241         bne-    3b
 242         subi    r12,r12,TI_FLAGS
 243
 244 4:      /* Anything else left to do? */
 245         andi.   r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
 246         beq     .ret_from_except_lite
 247
 248         /* Re-enable interrupts */
 249         mfmsr   r10
 250         ori     r10,r10,MSR_EE
 251         mtmsrd  r10,1
 252
 253         bl      .save_nvgprs
 254         addi    r3,r1,STACK_FRAME_OVERHEAD
 255         bl      .do_syscall_trace_leave
 256         b       .ret_from_except
 257
 258 /* Save non-volatile GPRs, if not already saved. */
 259 _GLOBAL(save_nvgprs)
 260         ld      r11,_TRAP(r1)
 261         andi.   r0,r11,1
 262         beqlr-
 263         SAVE_NVGPRS(r1)
 264         clrrdi  r0,r11,1
 265         std     r0,_TRAP(r1)
 266         blr
 267
 268
 269 /*
 270  * The sigsuspend and rt_sigsuspend system calls can call do_signal
 271  * and thus put the process into the stopped state where we might
 272  * want to examine its user state with ptrace.  Therefore we need
 273  * to save all the nonvolatile registers (r14 - r31) before calling
 274  * the C code.  Similarly, fork, vfork and clone need the full
 275  * register state on the stack so that it can be copied to the child.
 276  */
 277
 278 _GLOBAL(ppc_fork)
 279         bl      .save_nvgprs
 280         bl      .sys_fork
 281         b       syscall_exit
 282
 283 _GLOBAL(ppc_vfork)
 284         bl      .save_nvgprs
 285         bl      .sys_vfork
 286         b       syscall_exit
 287
 288 _GLOBAL(ppc_clone)
 289         bl      .save_nvgprs
 290         bl      .sys_clone
 291         b       syscall_exit
 292
 293 _GLOBAL(ppc32_swapcontext)
 294         bl      .save_nvgprs
 295         bl      .compat_sys_swapcontext
 296         b       syscall_exit
 297
 298 _GLOBAL(ppc64_swapcontext)
 299         bl      .save_nvgprs
 300         bl      .sys_swapcontext
 301         b       syscall_exit
 302
 303 _GLOBAL(ret_from_fork)
 304         bl      .schedule_tail
 305         REST_NVGPRS(r1)
 306         li      r3,0
 307         b       syscall_exit
 308
 309 /*
 310  * This routine switches between two different tasks.  The process
 311  * state of one is saved on its kernel stack.  Then the state
 312  * of the other is restored from its kernel stack.  The memory
 313  * management hardware is updated to the second process's state.
 314  * Finally, we can return to the second process, via ret_from_except.
 315  * On entry, r3 points to the THREAD for the current task, r4
 316  * points to the THREAD for the new task.
 317  *
 318  * Note: there are two ways to get to the "going out" portion
 319  * of this code; either by coming in via the entry (_switch)
 320  * or via "fork" which must set up an environment equivalent
 321  * to the "_switch" path.  If you change this you'll have to change
 322  * the fork code also.
 323  *
 324  * The code which creates the new task context is in 'copy_thread'
 325  * in arch/powerpc/kernel/process.c
 326  */
 327         .align  7
 328 _GLOBAL(_switch)
 329         mflr    r0
 330         std     r0,16(r1)
 331         stdu    r1,-SWITCH_FRAME_SIZE(r1)
 332         /* r3-r13 are caller saved -- Cort */
 333         SAVE_8GPRS(14, r1)
 334         SAVE_10GPRS(22, r1)
 335         mflr    r20             /* Return to switch caller */
 336         mfmsr   r22
 337         li      r0, MSR_FP
 338 #ifdef CONFIG_ALTIVEC
 339 BEGIN_FTR_SECTION
 340         oris    r0,r0,MSR_VEC@h /* Disable altivec */
 341         mfspr   r24,SPRN_VRSAVE /* save vrsave register value */
 342         std     r24,THREAD_VRSAVE(r3)
 343 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 344 #endif /* CONFIG_ALTIVEC */
 345         and.    r0,r0,r22
 346         beq+    1f
 347         andc    r22,r22,r0
 348         mtmsrd  r22
 349         isync
 350 1:      std     r20,_NIP(r1)
 351         mfcr    r23
 352         std     r23,_CCR(r1)
 353         std     r1,KSP(r3)      /* Set old stack pointer */
 354
 355 #ifdef CONFIG_SMP
 356         /* We need a sync somewhere here to make sure that if the
 357          * previous task gets rescheduled on another CPU, it sees all
 358          * stores it has performed on this one.
 359          */
 360         sync
 361 #endif /* CONFIG_SMP */
 362
 363         addi    r6,r4,-THREAD   /* Convert THREAD to 'current' */
 364         std     r6,PACACURRENT(r13)     /* Set new 'current' */
 365
 366         ld      r8,KSP(r4)      /* new stack pointer */
 367 BEGIN_FTR_SECTION
 368         clrrdi  r6,r8,28        /* get its ESID */
 369         clrrdi  r9,r1,28        /* get current sp ESID */
 370         clrldi. r0,r6,2         /* is new ESID c00000000? */
 371         cmpd    cr1,r6,r9       /* or is new ESID the same as current ESID? */
 372         cror    eq,4*cr1+eq,eq
 373         beq     2f              /* if yes, don't slbie it */
 374
 375         /* Bolt in the new stack SLB entry */
 376         ld      r7,KSP_VSID(r4) /* Get new stack's VSID */
 377         oris    r0,r6,(SLB_ESID_V)@h
 378         ori     r0,r0,(SLB_NUM_BOLTED-1)@l
 379         slbie   r6
 380         slbie   r6              /* Workaround POWER5 < DD2.1 issue */
 381         slbmte  r7,r0
 382         isync
 383
 384 2:
 385 END_FTR_SECTION_IFSET(CPU_FTR_SLB)
 386         clrrdi  r7,r8,THREAD_SHIFT      /* base of new stack */
 387         /* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE
 388            because we don't need to leave the 288-byte ABI gap at the
 389            top of the kernel stack. */
 390         addi    r7,r7,THREAD_SIZE-SWITCH_FRAME_SIZE
 391
 392         mr      r1,r8           /* start using new stack pointer */
 393         std     r7,PACAKSAVE(r13)
 394
 395         ld      r6,_CCR(r1)
 396         mtcrf   0xFF,r6
 397
 398 #ifdef CONFIG_ALTIVEC
 399 BEGIN_FTR_SECTION
 400         ld      r0,THREAD_VRSAVE(r4)
 401         mtspr   SPRN_VRSAVE,r0          /* if G4, restore VRSAVE reg */
 402 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 403 #endif /* CONFIG_ALTIVEC */
 404
 405         /* r3-r13 are destroyed -- Cort */
 406         REST_8GPRS(14, r1)
 407         REST_10GPRS(22, r1)
 408
 409         /* convert old thread to its task_struct for return value */
 410         addi    r3,r3,-THREAD
 411         ld      r7,_NIP(r1)     /* Return to _switch caller in new task */
 412         mtlr    r7
 413         addi    r1,r1,SWITCH_FRAME_SIZE
 414         blr
 415
 416         .align  7
 417 _GLOBAL(ret_from_except)
 418         ld      r11,_TRAP(r1)
 419         andi.   r0,r11,1
 420         bne     .ret_from_except_lite
 421         REST_NVGPRS(r1)
 422
 423 _GLOBAL(ret_from_except_lite)
 424         /*
 425          * Disable interrupts so that current_thread_info()->flags
 426          * can't change between when we test it and when we return
 427          * from the interrupt.
 428          */
 429         mfmsr   r10             /* Get current interrupt state */
 430         rldicl  r9,r10,48,1     /* clear MSR_EE */
 431         rotldi  r9,r9,16
 432         mtmsrd  r9,1            /* Update machine state */
 433
 434 #ifdef CONFIG_PREEMPT
 435         clrrdi  r9,r1,THREAD_SHIFT      /* current_thread_info() */
 436         li      r0,_TIF_NEED_RESCHED    /* bits to check */
 437         ld      r3,_MSR(r1)
 438         ld      r4,TI_FLAGS(r9)
 439         /* Move MSR_PR bit in r3 to _TIF_SIGPENDING position in r0 */
 440         rlwimi  r0,r3,32+TIF_SIGPENDING-MSR_PR_LG,_TIF_SIGPENDING
 441         and.    r0,r4,r0        /* check NEED_RESCHED and maybe SIGPENDING */
 442         bne     do_work
 443
 444 #else /* !CONFIG_PREEMPT */
 445         ld      r3,_MSR(r1)     /* Returning to user mode? */
 446         andi.   r3,r3,MSR_PR
 447         beq     restore         /* if not, just restore regs and return */
 448
 449         /* Check current_thread_info()->flags */
 450         clrrdi  r9,r1,THREAD_SHIFT
 451         ld      r4,TI_FLAGS(r9)
 452         andi.   r0,r4,_TIF_USER_WORK_MASK
 453         bne     do_work
 454 #endif
 455
 456 restore:
 457 #ifdef CONFIG_PPC_ISERIES
 458         ld      r5,SOFTE(r1)
 459         cmpdi   0,r5,0
 460         beq     4f
 461         /* Check for pending interrupts (iSeries) */
 462         ld      r3,PACALPPACAPTR(r13)
 463         ld      r3,LPPACAANYINT(r3)
 464         cmpdi   r3,0
 465         beq+    4f                      /* skip do_IRQ if no interrupts */
 466
 467         li      r3,0
 468         stb     r3,PACAPROCENABLED(r13) /* ensure we are soft-disabled */
 469         ori     r10,r10,MSR_EE
 470         mtmsrd  r10                     /* hard-enable again */
 471         addi    r3,r1,STACK_FRAME_OVERHEAD
 472         bl      .do_IRQ
 473         b       .ret_from_except_lite           /* loop back and handle more */
 474
 475 4:      stb     r5,PACAPROCENABLED(r13)
 476 #endif
 477
 478         ld      r3,_MSR(r1)
 479         andi.   r0,r3,MSR_RI
 480         beq-    unrecov_restore
 481
 482         andi.   r0,r3,MSR_PR
 483
 484         /*
 485          * r13 is our per cpu area, only restore it if we are returning to
 486          * userspace
 487          */
 488         beq     1f
 489         ACCOUNT_CPU_USER_EXIT(r3, r4)
 490         REST_GPR(13, r1)
 491 1:
 492         ld      r3,_CTR(r1)
 493         ld      r0,_LINK(r1)
 494         mtctr   r3
 495         mtlr    r0
 496         ld      r3,_XER(r1)
 497         mtspr   SPRN_XER,r3
 498
 499         REST_8GPRS(5, r1)
 500
 501         stdcx.  r0,0,r1         /* to clear the reservation */
 502
 503         mfmsr   r0
 504         li      r2, MSR_RI
 505         andc    r0,r0,r2
 506         mtmsrd  r0,1
 507
 508         ld      r0,_MSR(r1)
 509         mtspr   SPRN_SRR1,r0
 510
 511         ld      r2,_CCR(r1)
 512         mtcrf   0xFF,r2
 513         ld      r2,_NIP(r1)
 514         mtspr   SPRN_SRR0,r2
 515
 516         ld      r0,GPR0(r1)
 517         ld      r2,GPR2(r1)
 518         ld      r3,GPR3(r1)
 519         ld      r4,GPR4(r1)
 520         ld      r1,GPR1(r1)
 521
 522         rfid
 523         b       .       /* prevent speculative execution */
 524
 525 /* Note: this must change if we start using the TIF_NOTIFY_RESUME bit */
 526 do_work:
 527 #ifdef CONFIG_PREEMPT
 528         andi.   r0,r3,MSR_PR    /* Returning to user mode? */
 529         bne     user_work
 530         /* Check that preempt_count() == 0 and interrupts are enabled */
 531         lwz     r8,TI_PREEMPT(r9)
 532         cmpwi   cr1,r8,0
 533 #ifdef CONFIG_PPC_ISERIES
 534         ld      r0,SOFTE(r1)
 535         cmpdi   r0,0
 536 #else
 537         andi.   r0,r3,MSR_EE
 538 #endif
 539         crandc  eq,cr1*4+eq,eq
 540         bne     restore
 541         /* here we are preempting the current task */
 542 1:
 543 #ifdef CONFIG_PPC_ISERIES
 544         li      r0,1
 545         stb     r0,PACAPROCENABLED(r13)
 546 #endif
 547         ori     r10,r10,MSR_EE
 548         mtmsrd  r10,1           /* reenable interrupts */
 549         bl      .preempt_schedule
 550         mfmsr   r10
 551         clrrdi  r9,r1,THREAD_SHIFT
 552         rldicl  r10,r10,48,1    /* disable interrupts again */
 553         rotldi  r10,r10,16
 554         mtmsrd  r10,1
 555         ld      r4,TI_FLAGS(r9)
 556         andi.   r0,r4,_TIF_NEED_RESCHED
 557         bne     1b
 558         b       restore
 559
 560 user_work:
 561 #endif
 562         /* Enable interrupts */
 563         ori     r10,r10,MSR_EE
 564         mtmsrd  r10,1
 565
 566         andi.   r0,r4,_TIF_NEED_RESCHED
 567         beq     1f
 568         bl      .schedule
 569         b       .ret_from_except_lite
 570
 571 1:      bl      .save_nvgprs
 572         li      r3,0
 573         addi    r4,r1,STACK_FRAME_OVERHEAD
 574         bl      .do_signal
 575         b       .ret_from_except
 576
 577 unrecov_restore:
 578         addi    r3,r1,STACK_FRAME_OVERHEAD
 579         bl      .unrecoverable_exception
 580         b       unrecov_restore
 581
 582 #ifdef CONFIG_PPC_RTAS
 583 /*
 584  * On CHRP, the Run-Time Abstraction Services (RTAS) have to be
 585  * called with the MMU off.
 586  *
 587  * In addition, we need to be in 32b mode, at least for now.
 588  *
 589  * Note: r3 is an input parameter to rtas, so don't trash it...
 590  */
 591 _GLOBAL(enter_rtas)
 592         mflr    r0
 593         std     r0,16(r1)
 594         stdu    r1,-RTAS_FRAME_SIZE(r1) /* Save SP and create stack space. */
 595
 596         /* Because RTAS is running in 32b mode, it clobbers the high order half
 597          * of all registers that it saves.  We therefore save those registers
 598          * RTAS might touch to the stack.  (r0, r3-r13 are caller saved)
 599          */
 600         SAVE_GPR(2, r1)                 /* Save the TOC */
 601         SAVE_GPR(13, r1)                /* Save paca */
 602         SAVE_8GPRS(14, r1)              /* Save the non-volatiles */
 603         SAVE_10GPRS(22, r1)             /* ditto */
 604
 605         mfcr    r4
 606         std     r4,_CCR(r1)
 607         mfctr   r5
 608         std     r5,_CTR(r1)
 609         mfspr   r6,SPRN_XER
 610         std     r6,_XER(r1)
 611         mfdar   r7
 612         std     r7,_DAR(r1)
 613         mfdsisr r8
 614         std     r8,_DSISR(r1)
 615         mfsrr0  r9
 616         std     r9,_SRR0(r1)
 617         mfsrr1  r10
 618         std     r10,_SRR1(r1)
 619
 620         /* There is no way it is acceptable to get here with interrupts enabled,
 621          * check it with the asm equivalent of WARN_ON
 622          */
 623         mfmsr   r6
 624         andi.   r0,r6,MSR_EE
 625 1:      tdnei   r0,0
 626 .section __bug_table,"a"
 627         .llong  1b,__LINE__ + 0x1000000, 1f, 2f
 628 .previous
 629 .section .rodata,"a"
 630 1:      .asciz  __FILE__
 631 2:      .asciz "enter_rtas"
 632 .previous
 633
 634         /* Unfortunately, the stack pointer and the MSR are also clobbered,
 635          * so they are saved in the PACA which allows us to restore
 636          * our original state after RTAS returns.
 637          */
 638         std     r1,PACAR1(r13)
 639         std     r6,PACASAVEDMSR(r13)
 640
 641         /* Setup our real return addr */
 642         LOAD_REG_ADDR(r4,.rtas_return_loc)
 643         clrldi  r4,r4,2                 /* convert to realmode address */
 644         mtlr    r4
 645
 646         li      r0,0
 647         ori     r0,r0,MSR_EE|MSR_SE|MSR_BE|MSR_RI
 648         andc    r0,r6,r0
 649
 650         li      r9,1
 651         rldicr  r9,r9,MSR_SF_LG,(63-MSR_SF_LG)
 652         ori     r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP
 653         andc    r6,r0,r9
 654         ori     r6,r6,MSR_RI
 655         sync                            /* disable interrupts so SRR0/1 */
 656         mtmsrd  r0                      /* don't get trashed */
 657
 658         LOAD_REG_ADDR(r4, rtas)
 659         ld      r5,RTASENTRY(r4)        /* get the rtas->entry value */
 660         ld      r4,RTASBASE(r4)         /* get the rtas->base value */
 661
 662         mtspr   SPRN_SRR0,r5
 663         mtspr   SPRN_SRR1,r6
 664         rfid
 665         b       .       /* prevent speculative execution */
 666
 667 _STATIC(rtas_return_loc)
 668         /* relocation is off at this point */
 669         mfspr   r4,SPRN_SPRG3           /* Get PACA */
 670         clrldi  r4,r4,2                 /* convert to realmode address */
 671
 672         mfmsr   r6
 673         li      r0,MSR_RI
 674         andc    r6,r6,r0
 675         sync
 676         mtmsrd  r6
 677
 678         ld      r1,PACAR1(r4)           /* Restore our SP */
 679         LOAD_REG_IMMEDIATE(r3,.rtas_restore_regs)
 680         ld      r4,PACASAVEDMSR(r4)     /* Restore our MSR */
 681
 682         mtspr   SPRN_SRR0,r3
 683         mtspr   SPRN_SRR1,r4
 684         rfid
 685         b       .       /* prevent speculative execution */
 686
 687 _STATIC(rtas_restore_regs)
 688         /* relocation is on at this point */
 689         REST_GPR(2, r1)                 /* Restore the TOC */
 690         REST_GPR(13, r1)                /* Restore paca */
 691         REST_8GPRS(14, r1)              /* Restore the non-volatiles */
 692         REST_10GPRS(22, r1)             /* ditto */
 693
 694         mfspr   r13,SPRN_SPRG3
 695
 696         ld      r4,_CCR(r1)
 697         mtcr    r4
 698         ld      r5,_CTR(r1)
 699         mtctr   r5
 700         ld      r6,_XER(r1)
 701         mtspr   SPRN_XER,r6
 702         ld      r7,_DAR(r1)
 703         mtdar   r7
 704         ld      r8,_DSISR(r1)
 705         mtdsisr r8
 706         ld      r9,_SRR0(r1)
 707         mtsrr0  r9
 708         ld      r10,_SRR1(r1)
 709         mtsrr1  r10
 710
 711         addi    r1,r1,RTAS_FRAME_SIZE   /* Unstack our frame */
 712         ld      r0,16(r1)               /* get return address */
 713
 714         mtlr    r0
 715         blr                             /* return to caller */
 716
 717 #endif /* CONFIG_PPC_RTAS */
 718
 719 #ifdef CONFIG_PPC_MULTIPLATFORM
 720
 721 _GLOBAL(enter_prom)
 722         mflr    r0
 723         std     r0,16(r1)
 724         stdu    r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */
 725
 726         /* Because PROM is running in 32b mode, it clobbers the high order half
 727          * of all registers that it saves.  We therefore save those registers
 728          * PROM might touch to the stack.  (r0, r3-r13 are caller saved)
 729          */
 730         SAVE_8GPRS(2, r1)
 731         SAVE_GPR(13, r1)
 732         SAVE_8GPRS(14, r1)
 733         SAVE_10GPRS(22, r1)
 734         mfcr    r4
 735         std     r4,_CCR(r1)
 736         mfctr   r5
 737         std     r5,_CTR(r1)
 738         mfspr   r6,SPRN_XER
 739         std     r6,_XER(r1)
 740         mfdar   r7
 741         std     r7,_DAR(r1)
 742         mfdsisr r8
 743         std     r8,_DSISR(r1)
 744         mfsrr0  r9
 745         std     r9,_SRR0(r1)
 746         mfsrr1  r10
 747         std     r10,_SRR1(r1)
 748         mfmsr   r11
 749         std     r11,_MSR(r1)
 750
 751         /* Get the PROM entrypoint */
 752         ld      r0,GPR4(r1)
 753         mtlr    r0
 754
 755         /* Switch MSR to 32 bits mode
 756          */
 757         mfmsr   r11
 758         li      r12,1
 759         rldicr  r12,r12,MSR_SF_LG,(63-MSR_SF_LG)
 760         andc    r11,r11,r12
 761         li      r12,1
 762         rldicr  r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG)
 763         andc    r11,r11,r12
 764         mtmsrd  r11
 765         isync
 766
 767         /* Restore arguments & enter PROM here... */
 768         ld      r3,GPR3(r1)
 769         blrl
 770
 771         /* Just make sure that r1 top 32 bits didn't get
 772          * corrupt by OF
 773          */
 774         rldicl  r1,r1,0,32
 775
 776         /* Restore the MSR (back to 64 bits) */
 777         ld      r0,_MSR(r1)
 778         mtmsrd  r0
 779         isync
 780
 781         /* Restore other registers */
 782         REST_GPR(2, r1)
 783         REST_GPR(13, r1)
 784         REST_8GPRS(14, r1)
 785         REST_10GPRS(22, r1)
 786         ld      r4,_CCR(r1)
 787         mtcr    r4
 788         ld      r5,_CTR(r1)
 789         mtctr   r5
 790         ld      r6,_XER(r1)
 791         mtspr   SPRN_XER,r6
 792         ld      r7,_DAR(r1)
 793         mtdar   r7
 794         ld      r8,_DSISR(r1)
 795         mtdsisr r8
 796         ld      r9,_SRR0(r1)
 797         mtsrr0  r9
 798         ld      r10,_SRR1(r1)
 799         mtsrr1  r10
 800
 801         addi    r1,r1,PROM_FRAME_SIZE
 802         ld      r0,16(r1)
 803         mtlr    r0
 804         blr
 805
 806 #endif  /* CONFIG_PPC_MULTIPLATFORM */