2 * Contains common pci routines for ALL ppc platform
3 * (based on pci_32.c and pci_64.c)
5 * Port for PPC64 David Engebretsen, IBM Corp.
6 * Contains common pci routines for ppc64 platform, pSeries and iSeries brands.
8 * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
9 * Rework, based on alpha PCI code.
11 * Common pmac/prep/chrp pci routines. -- Cort
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License
15 * as published by the Free Software Foundation; either version
16 * 2 of the License, or (at your option) any later version.
19 #include <linux/kernel.h>
20 #include <linux/pci.h>
21 #include <linux/string.h>
22 #include <linux/init.h>
23 #include <linux/bootmem.h>
24 #include <linux/export.h>
25 #include <linux/of_address.h>
26 #include <linux/of_pci.h>
28 #include <linux/list.h>
29 #include <linux/syscalls.h>
30 #include <linux/irq.h>
31 #include <linux/vmalloc.h>
32 #include <linux/slab.h>
34 #include <asm/processor.h>
37 #include <asm/pci-bridge.h>
38 #include <asm/byteorder.h>
39 #include <asm/machdep.h>
40 #include <asm/ppc-pci.h>
43 static DEFINE_SPINLOCK(hose_spinlock
);
46 /* XXX kill that some day ... */
47 static int global_phb_number
; /* Global phb counter */
49 /* ISA Memory physical address */
50 resource_size_t isa_mem_base
;
53 static struct dma_map_ops
*pci_dma_ops
= &dma_direct_ops
;
55 void set_pci_dma_ops(struct dma_map_ops
*dma_ops
)
57 pci_dma_ops
= dma_ops
;
60 struct dma_map_ops
*get_pci_dma_ops(void)
64 EXPORT_SYMBOL(get_pci_dma_ops
);
66 struct pci_controller
*pcibios_alloc_controller(struct device_node
*dev
)
68 struct pci_controller
*phb
;
70 phb
= zalloc_maybe_bootmem(sizeof(struct pci_controller
), GFP_KERNEL
);
73 spin_lock(&hose_spinlock
);
74 phb
->global_number
= global_phb_number
++;
75 list_add_tail(&phb
->list_node
, &hose_list
);
76 spin_unlock(&hose_spinlock
);
78 phb
->is_dynamic
= mem_init_done
;
81 int nid
= of_node_to_nid(dev
);
83 if (nid
< 0 || !node_online(nid
))
86 PHB_SET_NODE(phb
, nid
);
92 void pcibios_free_controller(struct pci_controller
*phb
)
94 spin_lock(&hose_spinlock
);
95 list_del(&phb
->list_node
);
96 spin_unlock(&hose_spinlock
);
102 static resource_size_t
pcibios_io_size(const struct pci_controller
*hose
)
105 return hose
->pci_io_size
;
107 return resource_size(&hose
->io_resource
);
111 int pcibios_vaddr_is_ioport(void __iomem
*address
)
114 struct pci_controller
*hose
;
115 resource_size_t size
;
117 spin_lock(&hose_spinlock
);
118 list_for_each_entry(hose
, &hose_list
, list_node
) {
119 size
= pcibios_io_size(hose
);
120 if (address
>= hose
->io_base_virt
&&
121 address
< (hose
->io_base_virt
+ size
)) {
126 spin_unlock(&hose_spinlock
);
130 unsigned long pci_address_to_pio(phys_addr_t address
)
132 struct pci_controller
*hose
;
133 resource_size_t size
;
134 unsigned long ret
= ~0;
136 spin_lock(&hose_spinlock
);
137 list_for_each_entry(hose
, &hose_list
, list_node
) {
138 size
= pcibios_io_size(hose
);
139 if (address
>= hose
->io_base_phys
&&
140 address
< (hose
->io_base_phys
+ size
)) {
142 (unsigned long)hose
->io_base_virt
- _IO_BASE
;
143 ret
= base
+ (address
- hose
->io_base_phys
);
147 spin_unlock(&hose_spinlock
);
151 EXPORT_SYMBOL_GPL(pci_address_to_pio
);
154 * Return the domain number for this bus.
156 int pci_domain_nr(struct pci_bus
*bus
)
158 struct pci_controller
*hose
= pci_bus_to_host(bus
);
160 return hose
->global_number
;
162 EXPORT_SYMBOL(pci_domain_nr
);
164 /* This routine is meant to be used early during boot, when the
165 * PCI bus numbers have not yet been assigned, and you need to
166 * issue PCI config cycles to an OF device.
167 * It could also be used to "fix" RTAS config cycles if you want
168 * to set pci_assign_all_buses to 1 and still use RTAS for PCI
171 struct pci_controller
* pci_find_hose_for_OF_device(struct device_node
* node
)
174 struct pci_controller
*hose
, *tmp
;
175 list_for_each_entry_safe(hose
, tmp
, &hose_list
, list_node
)
176 if (hose
->dn
== node
)
183 static ssize_t
pci_show_devspec(struct device
*dev
,
184 struct device_attribute
*attr
, char *buf
)
186 struct pci_dev
*pdev
;
187 struct device_node
*np
;
189 pdev
= to_pci_dev (dev
);
190 np
= pci_device_to_OF_node(pdev
);
191 if (np
== NULL
|| np
->full_name
== NULL
)
193 return sprintf(buf
, "%s", np
->full_name
);
195 static DEVICE_ATTR(devspec
, S_IRUGO
, pci_show_devspec
, NULL
);
197 /* Add sysfs properties */
198 int pcibios_add_platform_entries(struct pci_dev
*pdev
)
200 return device_create_file(&pdev
->dev
, &dev_attr_devspec
);
203 char __devinit
*pcibios_setup(char *str
)
209 * Reads the interrupt pin to determine if interrupt is use by card.
210 * If the interrupt is used, then gets the interrupt line from the
211 * openfirmware and sets it in the pci_dev and pci_config line.
213 static int pci_read_irq_line(struct pci_dev
*pci_dev
)
218 pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev
));
221 memset(&oirq
, 0xff, sizeof(oirq
));
223 /* Try to get a mapping from the device-tree */
224 if (of_irq_map_pci(pci_dev
, &oirq
)) {
227 /* If that fails, lets fallback to what is in the config
228 * space and map that through the default controller. We
229 * also set the type to level low since that's what PCI
230 * interrupts are. If your platform does differently, then
231 * either provide a proper interrupt tree or don't use this
234 if (pci_read_config_byte(pci_dev
, PCI_INTERRUPT_PIN
, &pin
))
238 if (pci_read_config_byte(pci_dev
, PCI_INTERRUPT_LINE
, &line
) ||
239 line
== 0xff || line
== 0) {
242 pr_debug(" No map ! Using line %d (pin %d) from PCI config\n",
245 virq
= irq_create_mapping(NULL
, line
);
247 irq_set_irq_type(virq
, IRQ_TYPE_LEVEL_LOW
);
249 pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n",
250 oirq
.size
, oirq
.specifier
[0], oirq
.specifier
[1],
251 of_node_full_name(oirq
.controller
));
253 virq
= irq_create_of_mapping(oirq
.controller
, oirq
.specifier
,
257 pr_debug(" Failed to map !\n");
261 pr_debug(" Mapped to linux irq %d\n", virq
);
269 * Platform support for /proc/bus/pci/X/Y mmap()s,
270 * modelled on the sparc64 implementation by Dave Miller.
275 * Adjust vm_pgoff of VMA such that it is the physical page offset
276 * corresponding to the 32-bit pci bus offset for DEV requested by the user.
278 * Basically, the user finds the base address for his device which he wishes
279 * to mmap. They read the 32-bit value from the config space base register,
280 * add whatever PAGE_SIZE multiple offset they wish, and feed this into the
281 * offset parameter of mmap on /proc/bus/pci/XXX for that device.
283 * Returns negative error code on failure, zero on success.
285 static struct resource
*__pci_mmap_make_offset(struct pci_dev
*dev
,
286 resource_size_t
*offset
,
287 enum pci_mmap_state mmap_state
)
289 struct pci_controller
*hose
= pci_bus_to_host(dev
->bus
);
290 unsigned long io_offset
= 0;
294 return NULL
; /* should never happen */
296 /* If memory, add on the PCI bridge address offset */
297 if (mmap_state
== pci_mmap_mem
) {
298 #if 0 /* See comment in pci_resource_to_user() for why this is disabled */
299 *offset
+= hose
->pci_mem_offset
;
301 res_bit
= IORESOURCE_MEM
;
303 io_offset
= (unsigned long)hose
->io_base_virt
- _IO_BASE
;
304 *offset
+= io_offset
;
305 res_bit
= IORESOURCE_IO
;
309 * Check that the offset requested corresponds to one of the
310 * resources of the device.
312 for (i
= 0; i
<= PCI_ROM_RESOURCE
; i
++) {
313 struct resource
*rp
= &dev
->resource
[i
];
314 int flags
= rp
->flags
;
316 /* treat ROM as memory (should be already) */
317 if (i
== PCI_ROM_RESOURCE
)
318 flags
|= IORESOURCE_MEM
;
320 /* Active and same type? */
321 if ((flags
& res_bit
) == 0)
324 /* In the range of this resource? */
325 if (*offset
< (rp
->start
& PAGE_MASK
) || *offset
> rp
->end
)
328 /* found it! construct the final physical address */
329 if (mmap_state
== pci_mmap_io
)
330 *offset
+= hose
->io_base_phys
- io_offset
;
338 * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
341 static pgprot_t
__pci_mmap_set_pgprot(struct pci_dev
*dev
, struct resource
*rp
,
343 enum pci_mmap_state mmap_state
,
346 unsigned long prot
= pgprot_val(protection
);
348 /* Write combine is always 0 on non-memory space mappings. On
349 * memory space, if the user didn't pass 1, we check for a
350 * "prefetchable" resource. This is a bit hackish, but we use
351 * this to workaround the inability of /sysfs to provide a write
354 if (mmap_state
!= pci_mmap_mem
)
356 else if (write_combine
== 0) {
357 if (rp
->flags
& IORESOURCE_PREFETCH
)
361 /* XXX would be nice to have a way to ask for write-through */
363 return pgprot_noncached_wc(prot
);
365 return pgprot_noncached(prot
);
369 * This one is used by /dev/mem and fbdev who have no clue about the
370 * PCI device, it tries to find the PCI device first and calls the
373 pgprot_t
pci_phys_mem_access_prot(struct file
*file
,
378 struct pci_dev
*pdev
= NULL
;
379 struct resource
*found
= NULL
;
380 resource_size_t offset
= ((resource_size_t
)pfn
) << PAGE_SHIFT
;
383 if (page_is_ram(pfn
))
386 prot
= pgprot_noncached(prot
);
387 for_each_pci_dev(pdev
) {
388 for (i
= 0; i
<= PCI_ROM_RESOURCE
; i
++) {
389 struct resource
*rp
= &pdev
->resource
[i
];
390 int flags
= rp
->flags
;
392 /* Active and same type? */
393 if ((flags
& IORESOURCE_MEM
) == 0)
395 /* In the range of this resource? */
396 if (offset
< (rp
->start
& PAGE_MASK
) ||
406 if (found
->flags
& IORESOURCE_PREFETCH
)
407 prot
= pgprot_noncached_wc(prot
);
411 pr_debug("PCI: Non-PCI map for %llx, prot: %lx\n",
412 (unsigned long long)offset
, pgprot_val(prot
));
419 * Perform the actual remap of the pages for a PCI device mapping, as
420 * appropriate for this architecture. The region in the process to map
421 * is described by vm_start and vm_end members of VMA, the base physical
422 * address is found in vm_pgoff.
423 * The pci device structure is provided so that architectures may make mapping
424 * decisions on a per-device or per-bus basis.
426 * Returns a negative error code on failure, zero on success.
428 int pci_mmap_page_range(struct pci_dev
*dev
, struct vm_area_struct
*vma
,
429 enum pci_mmap_state mmap_state
, int write_combine
)
431 resource_size_t offset
=
432 ((resource_size_t
)vma
->vm_pgoff
) << PAGE_SHIFT
;
436 rp
= __pci_mmap_make_offset(dev
, &offset
, mmap_state
);
440 vma
->vm_pgoff
= offset
>> PAGE_SHIFT
;
441 vma
->vm_page_prot
= __pci_mmap_set_pgprot(dev
, rp
,
443 mmap_state
, write_combine
);
445 ret
= remap_pfn_range(vma
, vma
->vm_start
, vma
->vm_pgoff
,
446 vma
->vm_end
- vma
->vm_start
, vma
->vm_page_prot
);
451 /* This provides legacy IO read access on a bus */
452 int pci_legacy_read(struct pci_bus
*bus
, loff_t port
, u32
*val
, size_t size
)
454 unsigned long offset
;
455 struct pci_controller
*hose
= pci_bus_to_host(bus
);
456 struct resource
*rp
= &hose
->io_resource
;
459 /* Check if port can be supported by that bus. We only check
460 * the ranges of the PHB though, not the bus itself as the rules
461 * for forwarding legacy cycles down bridges are not our problem
462 * here. So if the host bridge supports it, we do it.
464 offset
= (unsigned long)hose
->io_base_virt
- _IO_BASE
;
467 if (!(rp
->flags
& IORESOURCE_IO
))
469 if (offset
< rp
->start
|| (offset
+ size
) > rp
->end
)
471 addr
= hose
->io_base_virt
+ port
;
475 *((u8
*)val
) = in_8(addr
);
480 *((u16
*)val
) = in_le16(addr
);
485 *((u32
*)val
) = in_le32(addr
);
491 /* This provides legacy IO write access on a bus */
492 int pci_legacy_write(struct pci_bus
*bus
, loff_t port
, u32 val
, size_t size
)
494 unsigned long offset
;
495 struct pci_controller
*hose
= pci_bus_to_host(bus
);
496 struct resource
*rp
= &hose
->io_resource
;
499 /* Check if port can be supported by that bus. We only check
500 * the ranges of the PHB though, not the bus itself as the rules
501 * for forwarding legacy cycles down bridges are not our problem
502 * here. So if the host bridge supports it, we do it.
504 offset
= (unsigned long)hose
->io_base_virt
- _IO_BASE
;
507 if (!(rp
->flags
& IORESOURCE_IO
))
509 if (offset
< rp
->start
|| (offset
+ size
) > rp
->end
)
511 addr
= hose
->io_base_virt
+ port
;
513 /* WARNING: The generic code is idiotic. It gets passed a pointer
514 * to what can be a 1, 2 or 4 byte quantity and always reads that
515 * as a u32, which means that we have to correct the location of
516 * the data read within those 32 bits for size 1 and 2
520 out_8(addr
, val
>> 24);
525 out_le16(addr
, val
>> 16);
536 /* This provides legacy IO or memory mmap access on a bus */
537 int pci_mmap_legacy_page_range(struct pci_bus
*bus
,
538 struct vm_area_struct
*vma
,
539 enum pci_mmap_state mmap_state
)
541 struct pci_controller
*hose
= pci_bus_to_host(bus
);
542 resource_size_t offset
=
543 ((resource_size_t
)vma
->vm_pgoff
) << PAGE_SHIFT
;
544 resource_size_t size
= vma
->vm_end
- vma
->vm_start
;
547 pr_debug("pci_mmap_legacy_page_range(%04x:%02x, %s @%llx..%llx)\n",
548 pci_domain_nr(bus
), bus
->number
,
549 mmap_state
== pci_mmap_mem
? "MEM" : "IO",
550 (unsigned long long)offset
,
551 (unsigned long long)(offset
+ size
- 1));
553 if (mmap_state
== pci_mmap_mem
) {
556 * Because X is lame and can fail starting if it gets an error trying
557 * to mmap legacy_mem (instead of just moving on without legacy memory
558 * access) we fake it here by giving it anonymous memory, effectively
559 * behaving just like /dev/zero
561 if ((offset
+ size
) > hose
->isa_mem_size
) {
563 "Process %s (pid:%d) mapped non-existing PCI legacy memory for 0%04x:%02x\n",
564 current
->comm
, current
->pid
, pci_domain_nr(bus
), bus
->number
);
565 if (vma
->vm_flags
& VM_SHARED
)
566 return shmem_zero_setup(vma
);
569 offset
+= hose
->isa_mem_phys
;
571 unsigned long io_offset
= (unsigned long)hose
->io_base_virt
- _IO_BASE
;
572 unsigned long roffset
= offset
+ io_offset
;
573 rp
= &hose
->io_resource
;
574 if (!(rp
->flags
& IORESOURCE_IO
))
576 if (roffset
< rp
->start
|| (roffset
+ size
) > rp
->end
)
578 offset
+= hose
->io_base_phys
;
580 pr_debug(" -> mapping phys %llx\n", (unsigned long long)offset
);
582 vma
->vm_pgoff
= offset
>> PAGE_SHIFT
;
583 vma
->vm_page_prot
= pgprot_noncached(vma
->vm_page_prot
);
584 return remap_pfn_range(vma
, vma
->vm_start
, vma
->vm_pgoff
,
585 vma
->vm_end
- vma
->vm_start
,
589 void pci_resource_to_user(const struct pci_dev
*dev
, int bar
,
590 const struct resource
*rsrc
,
591 resource_size_t
*start
, resource_size_t
*end
)
593 struct pci_controller
*hose
= pci_bus_to_host(dev
->bus
);
594 resource_size_t offset
= 0;
599 if (rsrc
->flags
& IORESOURCE_IO
)
600 offset
= (unsigned long)hose
->io_base_virt
- _IO_BASE
;
602 /* We pass a fully fixed up address to userland for MMIO instead of
603 * a BAR value because X is lame and expects to be able to use that
604 * to pass to /dev/mem !
606 * That means that we'll have potentially 64 bits values where some
607 * userland apps only expect 32 (like X itself since it thinks only
608 * Sparc has 64 bits MMIO) but if we don't do that, we break it on
611 * Hopefully, the sysfs insterface is immune to that gunk. Once X
612 * has been fixed (and the fix spread enough), we can re-enable the
613 * 2 lines below and pass down a BAR value to userland. In that case
614 * we'll also have to re-enable the matching code in
615 * __pci_mmap_make_offset().
620 else if (rsrc
->flags
& IORESOURCE_MEM
)
621 offset
= hose
->pci_mem_offset
;
624 *start
= rsrc
->start
- offset
;
625 *end
= rsrc
->end
- offset
;
629 * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
630 * @hose: newly allocated pci_controller to be setup
631 * @dev: device node of the host bridge
632 * @primary: set if primary bus (32 bits only, soon to be deprecated)
634 * This function will parse the "ranges" property of a PCI host bridge device
635 * node and setup the resource mapping of a pci controller based on its
638 * Life would be boring if it wasn't for a few issues that we have to deal
641 * - We can only cope with one IO space range and up to 3 Memory space
642 * ranges. However, some machines (thanks Apple !) tend to split their
643 * space into lots of small contiguous ranges. So we have to coalesce.
645 * - We can only cope with all memory ranges having the same offset
646 * between CPU addresses and PCI addresses. Unfortunately, some bridges
647 * are setup for a large 1:1 mapping along with a small "window" which
648 * maps PCI address 0 to some arbitrary high address of the CPU space in
649 * order to give access to the ISA memory hole.
650 * The way out of here that I've chosen for now is to always set the
651 * offset based on the first resource found, then override it if we
652 * have a different offset and the previous was set by an ISA hole.
654 * - Some busses have IO space not starting at 0, which causes trouble with
655 * the way we do our IO resource renumbering. The code somewhat deals with
656 * it for 64 bits but I would expect problems on 32 bits.
658 * - Some 32 bits platforms such as 4xx can have physical space larger than
659 * 32 bits so we need to use 64 bits values for the parsing
661 void __devinit
pci_process_bridge_OF_ranges(struct pci_controller
*hose
,
662 struct device_node
*dev
,
667 int pna
= of_n_addr_cells(dev
);
669 int memno
= 0, isa_hole
= -1;
671 unsigned long long pci_addr
, cpu_addr
, pci_next
, cpu_next
, size
;
672 unsigned long long isa_mb
= 0;
673 struct resource
*res
;
675 printk(KERN_INFO
"PCI host bridge %s %s ranges:\n",
676 dev
->full_name
, primary
? "(primary)" : "");
678 /* Get ranges property */
679 ranges
= of_get_property(dev
, "ranges", &rlen
);
684 while ((rlen
-= np
* 4) >= 0) {
685 /* Read next ranges element */
686 pci_space
= ranges
[0];
687 pci_addr
= of_read_number(ranges
+ 1, 2);
688 cpu_addr
= of_translate_address(dev
, ranges
+ 3);
689 size
= of_read_number(ranges
+ pna
+ 3, 2);
692 /* If we failed translation or got a zero-sized region
693 * (some FW try to feed us with non sensical zero sized regions
694 * such as power3 which look like some kind of attempt at exposing
695 * the VGA memory hole)
697 if (cpu_addr
== OF_BAD_ADDR
|| size
== 0)
700 /* Now consume following elements while they are contiguous */
701 for (; rlen
>= np
* sizeof(u32
);
702 ranges
+= np
, rlen
-= np
* 4) {
703 if (ranges
[0] != pci_space
)
705 pci_next
= of_read_number(ranges
+ 1, 2);
706 cpu_next
= of_translate_address(dev
, ranges
+ 3);
707 if (pci_next
!= pci_addr
+ size
||
708 cpu_next
!= cpu_addr
+ size
)
710 size
+= of_read_number(ranges
+ pna
+ 3, 2);
713 /* Act based on address space type */
715 switch ((pci_space
>> 24) & 0x3) {
716 case 1: /* PCI IO space */
718 " IO 0x%016llx..0x%016llx -> 0x%016llx\n",
719 cpu_addr
, cpu_addr
+ size
- 1, pci_addr
);
721 /* We support only one IO range */
722 if (hose
->pci_io_size
) {
724 " \\--> Skipped (too many) !\n");
728 /* On 32 bits, limit I/O space to 16MB */
729 if (size
> 0x01000000)
732 /* 32 bits needs to map IOs here */
733 hose
->io_base_virt
= ioremap(cpu_addr
, size
);
735 /* Expect trouble if pci_addr is not 0 */
738 (unsigned long)hose
->io_base_virt
;
739 #endif /* CONFIG_PPC32 */
740 /* pci_io_size and io_base_phys always represent IO
741 * space starting at 0 so we factor in pci_addr
743 hose
->pci_io_size
= pci_addr
+ size
;
744 hose
->io_base_phys
= cpu_addr
- pci_addr
;
747 res
= &hose
->io_resource
;
748 res
->flags
= IORESOURCE_IO
;
749 res
->start
= pci_addr
;
751 case 2: /* PCI Memory space */
752 case 3: /* PCI 64 bits Memory space */
754 " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
755 cpu_addr
, cpu_addr
+ size
- 1, pci_addr
,
756 (pci_space
& 0x40000000) ? "Prefetch" : "");
758 /* We support only 3 memory ranges */
761 " \\--> Skipped (too many) !\n");
764 /* Handles ISA memory hole space here */
768 if (primary
|| isa_mem_base
== 0)
769 isa_mem_base
= cpu_addr
;
770 hose
->isa_mem_phys
= cpu_addr
;
771 hose
->isa_mem_size
= size
;
774 /* We get the PCI/Mem offset from the first range or
775 * the, current one if the offset came from an ISA
776 * hole. If they don't match, bugger.
779 (isa_hole
>= 0 && pci_addr
!= 0 &&
780 hose
->pci_mem_offset
== isa_mb
))
781 hose
->pci_mem_offset
= cpu_addr
- pci_addr
;
782 else if (pci_addr
!= 0 &&
783 hose
->pci_mem_offset
!= cpu_addr
- pci_addr
) {
785 " \\--> Skipped (offset mismatch) !\n");
790 res
= &hose
->mem_resources
[memno
++];
791 res
->flags
= IORESOURCE_MEM
;
792 if (pci_space
& 0x40000000)
793 res
->flags
|= IORESOURCE_PREFETCH
;
794 res
->start
= cpu_addr
;
798 res
->name
= dev
->full_name
;
799 res
->end
= res
->start
+ size
- 1;
806 /* If there's an ISA hole and the pci_mem_offset is -not- matching
807 * the ISA hole offset, then we need to remove the ISA hole from
808 * the resource list for that brige
810 if (isa_hole
>= 0 && hose
->pci_mem_offset
!= isa_mb
) {
811 unsigned int next
= isa_hole
+ 1;
812 printk(KERN_INFO
" Removing ISA hole at 0x%016llx\n", isa_mb
);
814 memmove(&hose
->mem_resources
[isa_hole
],
815 &hose
->mem_resources
[next
],
816 sizeof(struct resource
) * (memno
- next
));
817 hose
->mem_resources
[--memno
].flags
= 0;
821 /* Decide whether to display the domain number in /proc */
822 int pci_proc_domain(struct pci_bus
*bus
)
824 struct pci_controller
*hose
= pci_bus_to_host(bus
);
826 if (!pci_has_flag(PCI_ENABLE_PROC_DOMAINS
))
828 if (pci_has_flag(PCI_COMPAT_DOMAIN_0
))
829 return hose
->global_number
!= 0;
833 /* This header fixup will do the resource fixup for all devices as they are
834 * probed, but not for bridge ranges
836 static void __devinit
pcibios_fixup_resources(struct pci_dev
*dev
)
838 struct pci_controller
*hose
= pci_bus_to_host(dev
->bus
);
842 printk(KERN_ERR
"No host bridge for PCI dev %s !\n",
846 for (i
= 0; i
< DEVICE_COUNT_RESOURCE
; i
++) {
847 struct resource
*res
= dev
->resource
+ i
;
851 /* If we're going to re-assign everything, we mark all resources
852 * as unset (and 0-base them). In addition, we mark BARs starting
853 * at 0 as unset as well, except if PCI_PROBE_ONLY is also set
854 * since in that case, we don't want to re-assign anything
856 if (pci_has_flag(PCI_REASSIGN_ALL_RSRC
) ||
857 (res
->start
== 0 && !pci_has_flag(PCI_PROBE_ONLY
))) {
858 /* Only print message if not re-assigning */
859 if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC
))
860 pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] "
863 (unsigned long long)res
->start
,
864 (unsigned long long)res
->end
,
865 (unsigned int)res
->flags
);
866 res
->end
-= res
->start
;
868 res
->flags
|= IORESOURCE_UNSET
;
872 pr_debug("PCI:%s Resource %d %016llx-%016llx [%x]\n",
874 (unsigned long long)res
->start
,\
875 (unsigned long long)res
->end
,
876 (unsigned int)res
->flags
);
879 /* Call machine specific resource fixup */
880 if (ppc_md
.pcibios_fixup_resources
)
881 ppc_md
.pcibios_fixup_resources(dev
);
883 DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID
, PCI_ANY_ID
, pcibios_fixup_resources
);
885 /* This function tries to figure out if a bridge resource has been initialized
886 * by the firmware or not. It doesn't have to be absolutely bullet proof, but
887 * things go more smoothly when it gets it right. It should covers cases such
888 * as Apple "closed" bridge resources and bare-metal pSeries unassigned bridges
890 static int __devinit
pcibios_uninitialized_bridge_resource(struct pci_bus
*bus
,
891 struct resource
*res
)
893 struct pci_controller
*hose
= pci_bus_to_host(bus
);
894 struct pci_dev
*dev
= bus
->self
;
895 resource_size_t offset
;
899 /* We don't do anything if PCI_PROBE_ONLY is set */
900 if (pci_has_flag(PCI_PROBE_ONLY
))
903 /* Job is a bit different between memory and IO */
904 if (res
->flags
& IORESOURCE_MEM
) {
905 /* If the BAR is non-0 (res != pci_mem_offset) then it's probably been
906 * initialized by somebody
908 if (res
->start
!= hose
->pci_mem_offset
)
911 /* The BAR is 0, let's check if memory decoding is enabled on
912 * the bridge. If not, we consider it unassigned
914 pci_read_config_word(dev
, PCI_COMMAND
, &command
);
915 if ((command
& PCI_COMMAND_MEMORY
) == 0)
918 /* Memory decoding is enabled and the BAR is 0. If any of the bridge
919 * resources covers that starting address (0 then it's good enough for
922 for (i
= 0; i
< 3; i
++) {
923 if ((hose
->mem_resources
[i
].flags
& IORESOURCE_MEM
) &&
924 hose
->mem_resources
[i
].start
== hose
->pci_mem_offset
)
928 /* Well, it starts at 0 and we know it will collide so we may as
929 * well consider it as unassigned. That covers the Apple case.
933 /* If the BAR is non-0, then we consider it assigned */
934 offset
= (unsigned long)hose
->io_base_virt
- _IO_BASE
;
935 if (((res
->start
- offset
) & 0xfffffffful
) != 0)
938 /* Here, we are a bit different than memory as typically IO space
939 * starting at low addresses -is- valid. What we do instead if that
940 * we consider as unassigned anything that doesn't have IO enabled
941 * in the PCI command register, and that's it.
943 pci_read_config_word(dev
, PCI_COMMAND
, &command
);
944 if (command
& PCI_COMMAND_IO
)
947 /* It's starting at 0 and IO is disabled in the bridge, consider
954 /* Fixup resources of a PCI<->PCI bridge */
955 static void __devinit
pcibios_fixup_bridge(struct pci_bus
*bus
)
957 struct resource
*res
;
960 struct pci_dev
*dev
= bus
->self
;
962 pci_bus_for_each_resource(bus
, res
, i
) {
963 if (!res
|| !res
->flags
)
965 if (i
>= 3 && bus
->self
->transparent
)
968 /* If we are going to re-assign everything, mark the resource
969 * as unset and move it down to 0
971 if (pci_has_flag(PCI_REASSIGN_ALL_RSRC
)) {
972 res
->flags
|= IORESOURCE_UNSET
;
973 res
->end
-= res
->start
;
978 pr_debug("PCI:%s Bus rsrc %d %016llx-%016llx [%x]\n",
980 (unsigned long long)res
->start
,\
981 (unsigned long long)res
->end
,
982 (unsigned int)res
->flags
);
984 /* Try to detect uninitialized P2P bridge resources,
985 * and clear them out so they get re-assigned later
987 if (pcibios_uninitialized_bridge_resource(bus
, res
)) {
989 pr_debug("PCI:%s (unassigned)\n", pci_name(dev
));
994 void __devinit
pcibios_setup_bus_self(struct pci_bus
*bus
)
996 /* Fix up the bus resources for P2P bridges */
997 if (bus
->self
!= NULL
)
998 pcibios_fixup_bridge(bus
);
1000 /* Platform specific bus fixups. This is currently only used
1001 * by fsl_pci and I'm hoping to get rid of it at some point
1003 if (ppc_md
.pcibios_fixup_bus
)
1004 ppc_md
.pcibios_fixup_bus(bus
);
1006 /* Setup bus DMA mappings */
1007 if (ppc_md
.pci_dma_bus_setup
)
1008 ppc_md
.pci_dma_bus_setup(bus
);
1011 void __devinit
pcibios_setup_bus_devices(struct pci_bus
*bus
)
1013 struct pci_dev
*dev
;
1015 pr_debug("PCI: Fixup bus devices %d (%s)\n",
1016 bus
->number
, bus
->self
? pci_name(bus
->self
) : "PHB");
1018 list_for_each_entry(dev
, &bus
->devices
, bus_list
) {
1019 /* Cardbus can call us to add new devices to a bus, so ignore
1020 * those who are already fully discovered
1025 /* Fixup NUMA node as it may not be setup yet by the generic
1026 * code and is needed by the DMA init
1028 set_dev_node(&dev
->dev
, pcibus_to_node(dev
->bus
));
1030 /* Hook up default DMA ops */
1031 set_dma_ops(&dev
->dev
, pci_dma_ops
);
1032 set_dma_offset(&dev
->dev
, PCI_DRAM_OFFSET
);
1034 /* Additional platform DMA/iommu setup */
1035 if (ppc_md
.pci_dma_dev_setup
)
1036 ppc_md
.pci_dma_dev_setup(dev
);
1038 /* Read default IRQs and fixup if necessary */
1039 pci_read_irq_line(dev
);
1040 if (ppc_md
.pci_irq_fixup
)
1041 ppc_md
.pci_irq_fixup(dev
);
1045 void pcibios_set_master(struct pci_dev
*dev
)
1047 /* No special bus mastering setup handling */
1050 void __devinit
pcibios_fixup_bus(struct pci_bus
*bus
)
1052 /* When called from the generic PCI probe, read PCI<->PCI bridge
1053 * bases. This is -not- called when generating the PCI tree from
1054 * the OF device-tree.
1056 if (bus
->self
!= NULL
)
1057 pci_read_bridge_bases(bus
);
1059 /* Now fixup the bus bus */
1060 pcibios_setup_bus_self(bus
);
1062 /* Now fixup devices on that bus */
1063 pcibios_setup_bus_devices(bus
);
1065 EXPORT_SYMBOL(pcibios_fixup_bus
);
1067 void __devinit
pci_fixup_cardbus(struct pci_bus
*bus
)
1069 /* Now fixup devices on that bus */
1070 pcibios_setup_bus_devices(bus
);
1074 static int skip_isa_ioresource_align(struct pci_dev
*dev
)
1076 if (pci_has_flag(PCI_CAN_SKIP_ISA_ALIGN
) &&
1077 !(dev
->bus
->bridge_ctl
& PCI_BRIDGE_CTL_ISA
))
1083 * We need to avoid collisions with `mirrored' VGA ports
1084 * and other strange ISA hardware, so we always want the
1085 * addresses to be allocated in the 0x000-0x0ff region
1088 * Why? Because some silly external IO cards only decode
1089 * the low 10 bits of the IO address. The 0x00-0xff region
1090 * is reserved for motherboard devices that decode all 16
1091 * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
1092 * but we want to try to avoid allocating at 0x2900-0x2bff
1093 * which might have be mirrored at 0x0100-0x03ff..
1095 resource_size_t
pcibios_align_resource(void *data
, const struct resource
*res
,
1096 resource_size_t size
, resource_size_t align
)
1098 struct pci_dev
*dev
= data
;
1099 resource_size_t start
= res
->start
;
1101 if (res
->flags
& IORESOURCE_IO
) {
1102 if (skip_isa_ioresource_align(dev
))
1105 start
= (start
+ 0x3ff) & ~0x3ff;
1110 EXPORT_SYMBOL(pcibios_align_resource
);
1113 * Reparent resource children of pr that conflict with res
1114 * under res, and make res replace those children.
1116 static int reparent_resources(struct resource
*parent
,
1117 struct resource
*res
)
1119 struct resource
*p
, **pp
;
1120 struct resource
**firstpp
= NULL
;
1122 for (pp
= &parent
->child
; (p
= *pp
) != NULL
; pp
= &p
->sibling
) {
1123 if (p
->end
< res
->start
)
1125 if (res
->end
< p
->start
)
1127 if (p
->start
< res
->start
|| p
->end
> res
->end
)
1128 return -1; /* not completely contained */
1129 if (firstpp
== NULL
)
1132 if (firstpp
== NULL
)
1133 return -1; /* didn't find any conflicting entries? */
1134 res
->parent
= parent
;
1135 res
->child
= *firstpp
;
1139 for (p
= res
->child
; p
!= NULL
; p
= p
->sibling
) {
1141 pr_debug("PCI: Reparented %s [%llx..%llx] under %s\n",
1143 (unsigned long long)p
->start
,
1144 (unsigned long long)p
->end
, res
->name
);
1150 * Handle resources of PCI devices. If the world were perfect, we could
1151 * just allocate all the resource regions and do nothing more. It isn't.
1152 * On the other hand, we cannot just re-allocate all devices, as it would
1153 * require us to know lots of host bridge internals. So we attempt to
1154 * keep as much of the original configuration as possible, but tweak it
1155 * when it's found to be wrong.
1157 * Known BIOS problems we have to work around:
1158 * - I/O or memory regions not configured
1159 * - regions configured, but not enabled in the command register
1160 * - bogus I/O addresses above 64K used
1161 * - expansion ROMs left enabled (this may sound harmless, but given
1162 * the fact the PCI specs explicitly allow address decoders to be
1163 * shared between expansion ROMs and other resource regions, it's
1164 * at least dangerous)
1167 * (1) Allocate resources for all buses behind PCI-to-PCI bridges.
1168 * This gives us fixed barriers on where we can allocate.
1169 * (2) Allocate resources for all enabled devices. If there is
1170 * a collision, just mark the resource as unallocated. Also
1171 * disable expansion ROMs during this step.
1172 * (3) Try to allocate resources for disabled devices. If the
1173 * resources were assigned correctly, everything goes well,
1174 * if they weren't, they won't disturb allocation of other
1176 * (4) Assign new addresses to resources which were either
1177 * not configured at all or misconfigured. If explicitly
1178 * requested by the user, configure expansion ROM address
1182 void pcibios_allocate_bus_resources(struct pci_bus
*bus
)
1186 struct resource
*res
, *pr
;
1188 pr_debug("PCI: Allocating bus resources for %04x:%02x...\n",
1189 pci_domain_nr(bus
), bus
->number
);
1191 pci_bus_for_each_resource(bus
, res
, i
) {
1192 if (!res
|| !res
->flags
|| res
->start
> res
->end
|| res
->parent
)
1195 /* If the resource was left unset at this point, we clear it */
1196 if (res
->flags
& IORESOURCE_UNSET
)
1197 goto clear_resource
;
1199 if (bus
->parent
== NULL
)
1200 pr
= (res
->flags
& IORESOURCE_IO
) ?
1201 &ioport_resource
: &iomem_resource
;
1203 pr
= pci_find_parent_resource(bus
->self
, res
);
1205 /* this happens when the generic PCI
1206 * code (wrongly) decides that this
1207 * bridge is transparent -- paulus
1213 pr_debug("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx "
1214 "[0x%x], parent %p (%s)\n",
1215 bus
->self
? pci_name(bus
->self
) : "PHB",
1217 (unsigned long long)res
->start
,
1218 (unsigned long long)res
->end
,
1219 (unsigned int)res
->flags
,
1220 pr
, (pr
&& pr
->name
) ? pr
->name
: "nil");
1222 if (pr
&& !(pr
->flags
& IORESOURCE_UNSET
)) {
1223 if (request_resource(pr
, res
) == 0)
1226 * Must be a conflict with an existing entry.
1227 * Move that entry (or entries) under the
1228 * bridge resource and try again.
1230 if (reparent_resources(pr
, res
) == 0)
1233 pr_warning("PCI: Cannot allocate resource region "
1234 "%d of PCI bridge %d, will remap\n", i
, bus
->number
);
1236 res
->start
= res
->end
= 0;
1240 list_for_each_entry(b
, &bus
->children
, node
)
1241 pcibios_allocate_bus_resources(b
);
1244 static inline void __devinit
alloc_resource(struct pci_dev
*dev
, int idx
)
1246 struct resource
*pr
, *r
= &dev
->resource
[idx
];
1248 pr_debug("PCI: Allocating %s: Resource %d: %016llx..%016llx [%x]\n",
1250 (unsigned long long)r
->start
,
1251 (unsigned long long)r
->end
,
1252 (unsigned int)r
->flags
);
1254 pr
= pci_find_parent_resource(dev
, r
);
1255 if (!pr
|| (pr
->flags
& IORESOURCE_UNSET
) ||
1256 request_resource(pr
, r
) < 0) {
1257 printk(KERN_WARNING
"PCI: Cannot allocate resource region %d"
1258 " of device %s, will remap\n", idx
, pci_name(dev
));
1260 pr_debug("PCI: parent is %p: %016llx-%016llx [%x]\n",
1262 (unsigned long long)pr
->start
,
1263 (unsigned long long)pr
->end
,
1264 (unsigned int)pr
->flags
);
1265 /* We'll assign a new address later */
1266 r
->flags
|= IORESOURCE_UNSET
;
1272 static void __init
pcibios_allocate_resources(int pass
)
1274 struct pci_dev
*dev
= NULL
;
1279 for_each_pci_dev(dev
) {
1280 pci_read_config_word(dev
, PCI_COMMAND
, &command
);
1281 for (idx
= 0; idx
<= PCI_ROM_RESOURCE
; idx
++) {
1282 r
= &dev
->resource
[idx
];
1283 if (r
->parent
) /* Already allocated */
1285 if (!r
->flags
|| (r
->flags
& IORESOURCE_UNSET
))
1286 continue; /* Not assigned at all */
1287 /* We only allocate ROMs on pass 1 just in case they
1288 * have been screwed up by firmware
1290 if (idx
== PCI_ROM_RESOURCE
)
1292 if (r
->flags
& IORESOURCE_IO
)
1293 disabled
= !(command
& PCI_COMMAND_IO
);
1295 disabled
= !(command
& PCI_COMMAND_MEMORY
);
1296 if (pass
== disabled
)
1297 alloc_resource(dev
, idx
);
1301 r
= &dev
->resource
[PCI_ROM_RESOURCE
];
1303 /* Turn the ROM off, leave the resource region,
1304 * but keep it unregistered.
1307 pci_read_config_dword(dev
, dev
->rom_base_reg
, ®
);
1308 if (reg
& PCI_ROM_ADDRESS_ENABLE
) {
1309 pr_debug("PCI: Switching off ROM of %s\n",
1311 r
->flags
&= ~IORESOURCE_ROM_ENABLE
;
1312 pci_write_config_dword(dev
, dev
->rom_base_reg
,
1313 reg
& ~PCI_ROM_ADDRESS_ENABLE
);
1319 static void __init
pcibios_reserve_legacy_regions(struct pci_bus
*bus
)
1321 struct pci_controller
*hose
= pci_bus_to_host(bus
);
1322 resource_size_t offset
;
1323 struct resource
*res
, *pres
;
1326 pr_debug("Reserving legacy ranges for domain %04x\n", pci_domain_nr(bus
));
1329 if (!(hose
->io_resource
.flags
& IORESOURCE_IO
))
1331 offset
= (unsigned long)hose
->io_base_virt
- _IO_BASE
;
1332 res
= kzalloc(sizeof(struct resource
), GFP_KERNEL
);
1333 BUG_ON(res
== NULL
);
1334 res
->name
= "Legacy IO";
1335 res
->flags
= IORESOURCE_IO
;
1336 res
->start
= offset
;
1337 res
->end
= (offset
+ 0xfff) & 0xfffffffful
;
1338 pr_debug("Candidate legacy IO: %pR\n", res
);
1339 if (request_resource(&hose
->io_resource
, res
)) {
1341 "PCI %04x:%02x Cannot reserve Legacy IO %pR\n",
1342 pci_domain_nr(bus
), bus
->number
, res
);
1347 /* Check for memory */
1348 offset
= hose
->pci_mem_offset
;
1349 pr_debug("hose mem offset: %016llx\n", (unsigned long long)offset
);
1350 for (i
= 0; i
< 3; i
++) {
1351 pres
= &hose
->mem_resources
[i
];
1352 if (!(pres
->flags
& IORESOURCE_MEM
))
1354 pr_debug("hose mem res: %pR\n", pres
);
1355 if ((pres
->start
- offset
) <= 0xa0000 &&
1356 (pres
->end
- offset
) >= 0xbffff)
1361 res
= kzalloc(sizeof(struct resource
), GFP_KERNEL
);
1362 BUG_ON(res
== NULL
);
1363 res
->name
= "Legacy VGA memory";
1364 res
->flags
= IORESOURCE_MEM
;
1365 res
->start
= 0xa0000 + offset
;
1366 res
->end
= 0xbffff + offset
;
1367 pr_debug("Candidate VGA memory: %pR\n", res
);
1368 if (request_resource(pres
, res
)) {
1370 "PCI %04x:%02x Cannot reserve VGA memory %pR\n",
1371 pci_domain_nr(bus
), bus
->number
, res
);
1376 void __init
pcibios_resource_survey(void)
1380 /* Allocate and assign resources */
1381 list_for_each_entry(b
, &pci_root_buses
, node
)
1382 pcibios_allocate_bus_resources(b
);
1383 pcibios_allocate_resources(0);
1384 pcibios_allocate_resources(1);
1386 /* Before we start assigning unassigned resource, we try to reserve
1387 * the low IO area and the VGA memory area if they intersect the
1388 * bus available resources to avoid allocating things on top of them
1390 if (!pci_has_flag(PCI_PROBE_ONLY
)) {
1391 list_for_each_entry(b
, &pci_root_buses
, node
)
1392 pcibios_reserve_legacy_regions(b
);
1395 /* Now, if the platform didn't decide to blindly trust the firmware,
1396 * we proceed to assigning things that were left unassigned
1398 if (!pci_has_flag(PCI_PROBE_ONLY
)) {
1399 pr_debug("PCI: Assigning unassigned resources...\n");
1400 pci_assign_unassigned_resources();
1403 /* Call machine dependent fixup */
1404 if (ppc_md
.pcibios_fixup
)
1405 ppc_md
.pcibios_fixup();
1408 #ifdef CONFIG_HOTPLUG
1410 /* This is used by the PCI hotplug driver to allocate resource
1411 * of newly plugged busses. We can try to consolidate with the
1412 * rest of the code later, for now, keep it as-is as our main
1413 * resource allocation function doesn't deal with sub-trees yet.
1415 void pcibios_claim_one_bus(struct pci_bus
*bus
)
1417 struct pci_dev
*dev
;
1418 struct pci_bus
*child_bus
;
1420 list_for_each_entry(dev
, &bus
->devices
, bus_list
) {
1423 for (i
= 0; i
< PCI_NUM_RESOURCES
; i
++) {
1424 struct resource
*r
= &dev
->resource
[i
];
1426 if (r
->parent
|| !r
->start
|| !r
->flags
)
1429 pr_debug("PCI: Claiming %s: "
1430 "Resource %d: %016llx..%016llx [%x]\n",
1432 (unsigned long long)r
->start
,
1433 (unsigned long long)r
->end
,
1434 (unsigned int)r
->flags
);
1436 pci_claim_resource(dev
, i
);
1440 list_for_each_entry(child_bus
, &bus
->children
, node
)
1441 pcibios_claim_one_bus(child_bus
);
1445 /* pcibios_finish_adding_to_bus
1447 * This is to be called by the hotplug code after devices have been
1448 * added to a bus, this include calling it for a PHB that is just
1451 void pcibios_finish_adding_to_bus(struct pci_bus
*bus
)
1453 pr_debug("PCI: Finishing adding to hotplug bus %04x:%02x\n",
1454 pci_domain_nr(bus
), bus
->number
);
1456 /* Allocate bus and devices resources */
1457 pcibios_allocate_bus_resources(bus
);
1458 pcibios_claim_one_bus(bus
);
1460 /* Add new devices to global lists. Register in proc, sysfs. */
1461 pci_bus_add_devices(bus
);
1464 eeh_add_device_tree_late(bus
);
1466 EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus
);
1468 #endif /* CONFIG_HOTPLUG */
1470 int pcibios_enable_device(struct pci_dev
*dev
, int mask
)
1472 if (ppc_md
.pcibios_enable_device_hook
)
1473 if (ppc_md
.pcibios_enable_device_hook(dev
))
1476 return pci_enable_resources(dev
, mask
);
1479 resource_size_t
pcibios_io_space_offset(struct pci_controller
*hose
)
1481 return (unsigned long) hose
->io_base_virt
- _IO_BASE
;
1484 static void __devinit
pcibios_setup_phb_resources(struct pci_controller
*hose
, struct list_head
*resources
)
1486 struct resource
*res
;
1489 /* Hookup PHB IO resource */
1490 res
= &hose
->io_resource
;
1493 printk(KERN_WARNING
"PCI: I/O resource not set for host"
1494 " bridge %s (domain %d)\n",
1495 hose
->dn
->full_name
, hose
->global_number
);
1497 /* Workaround for lack of IO resource only on 32-bit */
1498 res
->start
= (unsigned long)hose
->io_base_virt
- isa_io_base
;
1499 res
->end
= res
->start
+ IO_SPACE_LIMIT
;
1500 res
->flags
= IORESOURCE_IO
;
1501 #endif /* CONFIG_PPC32 */
1504 pr_debug("PCI: PHB IO resource = %016llx-%016llx [%lx]\n",
1505 (unsigned long long)res
->start
,
1506 (unsigned long long)res
->end
,
1507 (unsigned long)res
->flags
);
1508 pci_add_resource_offset(resources
, res
, pcibios_io_space_offset(hose
));
1510 /* Hookup PHB Memory resources */
1511 for (i
= 0; i
< 3; ++i
) {
1512 res
= &hose
->mem_resources
[i
];
1516 printk(KERN_ERR
"PCI: Memory resource 0 not set for "
1517 "host bridge %s (domain %d)\n",
1518 hose
->dn
->full_name
, hose
->global_number
);
1520 /* Workaround for lack of MEM resource only on 32-bit */
1521 res
->start
= hose
->pci_mem_offset
;
1522 res
->end
= (resource_size_t
)-1LL;
1523 res
->flags
= IORESOURCE_MEM
;
1524 #endif /* CONFIG_PPC32 */
1527 pr_debug("PCI: PHB MEM resource %d = %016llx-%016llx [%lx]\n", i
,
1528 (unsigned long long)res
->start
,
1529 (unsigned long long)res
->end
,
1530 (unsigned long)res
->flags
);
1531 pci_add_resource_offset(resources
, res
, hose
->pci_mem_offset
);
1534 pr_debug("PCI: PHB MEM offset = %016llx\n",
1535 (unsigned long long)hose
->pci_mem_offset
);
1536 pr_debug("PCI: PHB IO offset = %08lx\n",
1537 (unsigned long)hose
->io_base_virt
- _IO_BASE
);
1542 * Null PCI config access functions, for the case when we can't
1545 #define NULL_PCI_OP(rw, size, type) \
1547 null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \
1549 return PCIBIOS_DEVICE_NOT_FOUND; \
1553 null_read_config(struct pci_bus
*bus
, unsigned int devfn
, int offset
,
1556 return PCIBIOS_DEVICE_NOT_FOUND
;
1560 null_write_config(struct pci_bus
*bus
, unsigned int devfn
, int offset
,
1563 return PCIBIOS_DEVICE_NOT_FOUND
;
1566 static struct pci_ops null_pci_ops
=
1568 .read
= null_read_config
,
1569 .write
= null_write_config
,
1573 * These functions are used early on before PCI scanning is done
1574 * and all of the pci_dev and pci_bus structures have been created.
1576 static struct pci_bus
*
1577 fake_pci_bus(struct pci_controller
*hose
, int busnr
)
1579 static struct pci_bus bus
;
1582 printk(KERN_ERR
"Can't find hose for PCI bus %d!\n", busnr
);
1586 bus
.ops
= hose
? hose
->ops
: &null_pci_ops
;
1590 #define EARLY_PCI_OP(rw, size, type) \
1591 int early_##rw##_config_##size(struct pci_controller *hose, int bus, \
1592 int devfn, int offset, type value) \
1594 return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \
1595 devfn, offset, value); \
1598 EARLY_PCI_OP(read
, byte
, u8
*)
1599 EARLY_PCI_OP(read
, word
, u16
*)
1600 EARLY_PCI_OP(read
, dword
, u32
*)
1601 EARLY_PCI_OP(write
, byte
, u8
)
1602 EARLY_PCI_OP(write
, word
, u16
)
1603 EARLY_PCI_OP(write
, dword
, u32
)
1605 extern int pci_bus_find_capability (struct pci_bus
*bus
, unsigned int devfn
, int cap
);
1606 int early_find_capability(struct pci_controller
*hose
, int bus
, int devfn
,
1609 return pci_bus_find_capability(fake_pci_bus(hose
, bus
), devfn
, cap
);
1612 struct device_node
*pcibios_get_phb_of_node(struct pci_bus
*bus
)
1614 struct pci_controller
*hose
= bus
->sysdata
;
1616 return of_node_get(hose
->dn
);
1620 * pci_scan_phb - Given a pci_controller, setup and scan the PCI bus
1621 * @hose: Pointer to the PCI host controller instance structure
1623 void __devinit
pcibios_scan_phb(struct pci_controller
*hose
)
1625 LIST_HEAD(resources
);
1626 struct pci_bus
*bus
;
1627 struct device_node
*node
= hose
->dn
;
1630 pr_debug("PCI: Scanning PHB %s\n", of_node_full_name(node
));
1632 /* Get some IO space for the new PHB */
1633 pcibios_setup_phb_io_space(hose
);
1635 /* Wire up PHB bus resources */
1636 pcibios_setup_phb_resources(hose
, &resources
);
1638 /* Create an empty bus for the toplevel */
1639 bus
= pci_create_root_bus(hose
->parent
, hose
->first_busno
,
1640 hose
->ops
, hose
, &resources
);
1642 pr_err("Failed to create bus for PCI domain %04x\n",
1643 hose
->global_number
);
1644 pci_free_resource_list(&resources
);
1647 bus
->secondary
= hose
->first_busno
;
1650 /* Get probe mode and perform scan */
1651 mode
= PCI_PROBE_NORMAL
;
1652 if (node
&& ppc_md
.pci_probe_mode
)
1653 mode
= ppc_md
.pci_probe_mode(bus
);
1654 pr_debug(" probe mode: %d\n", mode
);
1655 if (mode
== PCI_PROBE_DEVTREE
) {
1656 bus
->subordinate
= hose
->last_busno
;
1657 of_scan_bus(node
, bus
);
1660 if (mode
== PCI_PROBE_NORMAL
)
1661 hose
->last_busno
= bus
->subordinate
= pci_scan_child_bus(bus
);
1663 /* Platform gets a chance to do some global fixups before
1664 * we proceed to resource allocation
1666 if (ppc_md
.pcibios_fixup_phb
)
1667 ppc_md
.pcibios_fixup_phb(hose
);
1669 /* Configure PCI Express settings */
1670 if (bus
&& !pci_has_flag(PCI_PROBE_ONLY
)) {
1671 struct pci_bus
*child
;
1672 list_for_each_entry(child
, &bus
->children
, node
) {
1673 struct pci_dev
*self
= child
->self
;
1676 pcie_bus_configure_settings(child
, self
->pcie_mpss
);
1681 static void fixup_hide_host_resource_fsl(struct pci_dev
*dev
)
1683 int i
, class = dev
->class >> 8;
1684 /* When configured as agent, programing interface = 1 */
1685 int prog_if
= dev
->class & 0xf;
1687 if ((class == PCI_CLASS_PROCESSOR_POWERPC
||
1688 class == PCI_CLASS_BRIDGE_OTHER
) &&
1689 (dev
->hdr_type
== PCI_HEADER_TYPE_NORMAL
) &&
1691 (dev
->bus
->parent
== NULL
)) {
1692 for (i
= 0; i
< DEVICE_COUNT_RESOURCE
; i
++) {
1693 dev
->resource
[i
].start
= 0;
1694 dev
->resource
[i
].end
= 0;
1695 dev
->resource
[i
].flags
= 0;
1699 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA
, PCI_ANY_ID
, fixup_hide_host_resource_fsl
);
1700 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE
, PCI_ANY_ID
, fixup_hide_host_resource_fsl
);