2 * Procedures for interfacing to Open Firmware.
4 * Paul Mackerras August 1996.
5 * Copyright (C) 1996-2005 Paul Mackerras.
7 * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
8 * {engebret|bergner}@us.ibm.com
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version
13 * 2 of the License, or (at your option) any later version.
19 #include <linux/config.h>
20 #include <linux/kernel.h>
21 #include <linux/string.h>
22 #include <linux/init.h>
23 #include <linux/threads.h>
24 #include <linux/spinlock.h>
25 #include <linux/types.h>
26 #include <linux/pci.h>
27 #include <linux/proc_fs.h>
28 #include <linux/stringify.h>
29 #include <linux/delay.h>
30 #include <linux/initrd.h>
31 #include <linux/bitops.h>
35 #include <asm/processor.h>
39 #include <asm/system.h>
41 #include <asm/pgtable.h>
43 #include <asm/iommu.h>
44 #include <asm/btext.h>
45 #include <asm/sections.h>
46 #include <asm/machdep.h>
48 #ifdef CONFIG_LOGO_LINUX_CLUT224
49 #include <linux/linux_logo.h>
50 extern const struct linux_logo logo_linux_clut224
;
54 * Properties whose value is longer than this get excluded from our
55 * copy of the device tree. This value does need to be big enough to
56 * ensure that we don't lose things like the interrupt-map property
57 * on a PCI-PCI bridge.
59 #define MAX_PROPERTY_LENGTH (1UL * 1024 * 1024)
62 * Eventually bump that one up
64 #define DEVTREE_CHUNK_SIZE 0x100000
67 * This is the size of the local memory reserve map that gets copied
68 * into the boot params passed to the kernel. That size is totally
69 * flexible as the kernel just reads the list until it encounters an
70 * entry with size 0, so it can be changed without breaking binary
73 #define MEM_RESERVE_MAP_SIZE 8
76 * prom_init() is called very early on, before the kernel text
77 * and data have been mapped to KERNELBASE. At this point the code
78 * is running at whatever address it has been loaded at.
79 * On ppc32 we compile with -mrelocatable, which means that references
80 * to extern and static variables get relocated automatically.
81 * On ppc64 we have to relocate the references explicitly with
82 * RELOC. (Note that strings count as static variables.)
84 * Because OF may have mapped I/O devices into the area starting at
85 * KERNELBASE, particularly on CHRP machines, we can't safely call
86 * OF once the kernel has been mapped to KERNELBASE. Therefore all
87 * OF calls must be done within prom_init().
89 * ADDR is used in calls to call_prom. The 4th and following
90 * arguments to call_prom should be 32-bit values.
91 * On ppc64, 64 bit values are truncated to 32 bits (and
92 * fortunately don't get interpreted as two arguments).
95 #define RELOC(x) (*PTRRELOC(&(x)))
96 #define ADDR(x) (u32) add_reloc_offset((unsigned long)(x))
97 #define OF_WORKAROUNDS 0
100 #define ADDR(x) (u32) (x)
101 #define OF_WORKAROUNDS of_workarounds
105 #define OF_WA_CLAIM 1 /* do phys/virt claim separately, then map */
106 #define OF_WA_LONGTRAIL 2 /* work around longtrail bugs */
108 #define PROM_BUG() do { \
109 prom_printf("kernel BUG at %s line 0x%x!\n", \
110 RELOC(__FILE__), __LINE__); \
111 __asm__ __volatile__(".long " BUG_ILLEGAL_INSTR); \
115 #define prom_debug(x...) prom_printf(x)
117 #define prom_debug(x...)
121 typedef u32 prom_arg_t
;
139 struct mem_map_entry
{
146 extern void __start(unsigned long r3
, unsigned long r4
, unsigned long r5
);
149 extern int enter_prom(struct prom_args
*args
, unsigned long entry
);
151 static inline int enter_prom(struct prom_args
*args
, unsigned long entry
)
153 return ((int (*)(struct prom_args
*))entry
)(args
);
157 extern void copy_and_flush(unsigned long dest
, unsigned long src
,
158 unsigned long size
, unsigned long offset
);
161 static struct prom_t __initdata prom
;
163 static unsigned long prom_entry __initdata
;
165 #define PROM_SCRATCH_SIZE 256
167 static char __initdata of_stdout_device
[256];
168 static char __initdata prom_scratch
[PROM_SCRATCH_SIZE
];
170 static unsigned long __initdata dt_header_start
;
171 static unsigned long __initdata dt_struct_start
, dt_struct_end
;
172 static unsigned long __initdata dt_string_start
, dt_string_end
;
174 static unsigned long __initdata prom_initrd_start
, prom_initrd_end
;
177 static int __initdata iommu_force_on
;
178 static int __initdata ppc64_iommu_off
;
179 static unsigned long __initdata prom_tce_alloc_start
;
180 static unsigned long __initdata prom_tce_alloc_end
;
183 /* Platforms codes are now obsolete in the kernel. Now only used within this
184 * file and ultimately gone too. Feel free to change them if you need, they
185 * are not shared with anything outside of this file anymore
187 #define PLATFORM_PSERIES 0x0100
188 #define PLATFORM_PSERIES_LPAR 0x0101
189 #define PLATFORM_LPAR 0x0001
190 #define PLATFORM_POWERMAC 0x0400
191 #define PLATFORM_GENERIC 0x0500
193 static int __initdata of_platform
;
195 static char __initdata prom_cmd_line
[COMMAND_LINE_SIZE
];
197 static unsigned long __initdata prom_memory_limit
;
199 static unsigned long __initdata alloc_top
;
200 static unsigned long __initdata alloc_top_high
;
201 static unsigned long __initdata alloc_bottom
;
202 static unsigned long __initdata rmo_top
;
203 static unsigned long __initdata ram_top
;
206 static unsigned long __initdata prom_crashk_base
;
207 static unsigned long __initdata prom_crashk_size
;
210 static struct mem_map_entry __initdata mem_reserve_map
[MEM_RESERVE_MAP_SIZE
];
211 static int __initdata mem_reserve_cnt
;
213 static cell_t __initdata regbuf
[1024];
216 #define MAX_CPU_THREADS 2
219 * Error results ... some OF calls will return "-1" on error, some
220 * will return 0, some will return either. To simplify, here are
221 * macros to use with any ihandle or phandle return value to check if
225 #define PROM_ERROR (-1u)
226 #define PHANDLE_VALID(p) ((p) != 0 && (p) != PROM_ERROR)
227 #define IHANDLE_VALID(i) ((i) != 0 && (i) != PROM_ERROR)
230 /* This is the one and *ONLY* place where we actually call open
234 static int __init
call_prom(const char *service
, int nargs
, int nret
, ...)
237 struct prom_args args
;
240 args
.service
= ADDR(service
);
244 va_start(list
, nret
);
245 for (i
= 0; i
< nargs
; i
++)
246 args
.args
[i
] = va_arg(list
, prom_arg_t
);
249 for (i
= 0; i
< nret
; i
++)
250 args
.args
[nargs
+i
] = 0;
252 if (enter_prom(&args
, RELOC(prom_entry
)) < 0)
255 return (nret
> 0) ? args
.args
[nargs
] : 0;
258 static int __init
call_prom_ret(const char *service
, int nargs
, int nret
,
259 prom_arg_t
*rets
, ...)
262 struct prom_args args
;
265 args
.service
= ADDR(service
);
269 va_start(list
, rets
);
270 for (i
= 0; i
< nargs
; i
++)
271 args
.args
[i
] = va_arg(list
, prom_arg_t
);
274 for (i
= 0; i
< nret
; i
++)
275 args
.args
[nargs
+i
] = 0;
277 if (enter_prom(&args
, RELOC(prom_entry
)) < 0)
281 for (i
= 1; i
< nret
; ++i
)
282 rets
[i
-1] = args
.args
[nargs
+i
];
284 return (nret
> 0) ? args
.args
[nargs
] : 0;
288 static void __init
prom_print(const char *msg
)
291 struct prom_t
*_prom
= &RELOC(prom
);
293 if (_prom
->stdout
== 0)
296 for (p
= msg
; *p
!= 0; p
= q
) {
297 for (q
= p
; *q
!= 0 && *q
!= '\n'; ++q
)
300 call_prom("write", 3, 1, _prom
->stdout
, p
, q
- p
);
304 call_prom("write", 3, 1, _prom
->stdout
, ADDR("\r\n"), 2);
309 static void __init
prom_print_hex(unsigned long val
)
311 int i
, nibbles
= sizeof(val
)*2;
312 char buf
[sizeof(val
)*2+1];
313 struct prom_t
*_prom
= &RELOC(prom
);
315 for (i
= nibbles
-1; i
>= 0; i
--) {
316 buf
[i
] = (val
& 0xf) + '0';
318 buf
[i
] += ('a'-'0'-10);
322 call_prom("write", 3, 1, _prom
->stdout
, buf
, nibbles
);
326 static void __init
prom_printf(const char *format
, ...)
328 const char *p
, *q
, *s
;
331 struct prom_t
*_prom
= &RELOC(prom
);
333 va_start(args
, format
);
335 format
= PTRRELOC(format
);
337 for (p
= format
; *p
!= 0; p
= q
) {
338 for (q
= p
; *q
!= 0 && *q
!= '\n' && *q
!= '%'; ++q
)
341 call_prom("write", 3, 1, _prom
->stdout
, p
, q
- p
);
346 call_prom("write", 3, 1, _prom
->stdout
,
356 s
= va_arg(args
, const char *);
361 v
= va_arg(args
, unsigned long);
369 static unsigned int __init
prom_claim(unsigned long virt
, unsigned long size
,
372 struct prom_t
*_prom
= &RELOC(prom
);
374 if (align
== 0 && (OF_WORKAROUNDS
& OF_WA_CLAIM
)) {
376 * Old OF requires we claim physical and virtual separately
377 * and then map explicitly (assuming virtual mode)
382 ret
= call_prom_ret("call-method", 5, 2, &result
,
383 ADDR("claim"), _prom
->memory
,
385 if (ret
!= 0 || result
== -1)
387 ret
= call_prom_ret("call-method", 5, 2, &result
,
388 ADDR("claim"), _prom
->mmumap
,
391 call_prom("call-method", 4, 1, ADDR("release"),
392 _prom
->memory
, size
, virt
);
395 /* the 0x12 is M (coherence) + PP == read/write */
396 call_prom("call-method", 6, 1,
397 ADDR("map"), _prom
->mmumap
, 0x12, size
, virt
, virt
);
400 return call_prom("claim", 3, 1, (prom_arg_t
)virt
, (prom_arg_t
)size
,
404 static void __init
__attribute__((noreturn
)) prom_panic(const char *reason
)
407 reason
= PTRRELOC(reason
);
410 /* Do not call exit because it clears the screen on pmac
411 * it also causes some sort of double-fault on early pmacs */
412 if (RELOC(of_platform
) == PLATFORM_POWERMAC
)
415 /* ToDo: should put up an SRC here on p/iSeries */
416 call_prom("exit", 0, 0);
418 for (;;) /* should never get here */
423 static int __init
prom_next_node(phandle
*nodep
)
427 if ((node
= *nodep
) != 0
428 && (*nodep
= call_prom("child", 1, 1, node
)) != 0)
430 if ((*nodep
= call_prom("peer", 1, 1, node
)) != 0)
433 if ((node
= call_prom("parent", 1, 1, node
)) == 0)
435 if ((*nodep
= call_prom("peer", 1, 1, node
)) != 0)
440 static int inline prom_getprop(phandle node
, const char *pname
,
441 void *value
, size_t valuelen
)
443 return call_prom("getprop", 4, 1, node
, ADDR(pname
),
444 (u32
)(unsigned long) value
, (u32
) valuelen
);
447 static int inline prom_getproplen(phandle node
, const char *pname
)
449 return call_prom("getproplen", 2, 1, node
, ADDR(pname
));
452 static void add_string(char **str
, const char *q
)
462 static char *tohex(unsigned int x
)
464 static char digits
[] = "0123456789abcdef";
465 static char result
[9];
472 result
[i
] = digits
[x
& 0xf];
474 } while (x
!= 0 && i
> 0);
478 static int __init
prom_setprop(phandle node
, const char *nodename
,
479 const char *pname
, void *value
, size_t valuelen
)
483 if (!(OF_WORKAROUNDS
& OF_WA_LONGTRAIL
))
484 return call_prom("setprop", 4, 1, node
, ADDR(pname
),
485 (u32
)(unsigned long) value
, (u32
) valuelen
);
487 /* gah... setprop doesn't work on longtrail, have to use interpret */
489 add_string(&p
, "dev");
490 add_string(&p
, nodename
);
491 add_string(&p
, tohex((u32
)(unsigned long) value
));
492 add_string(&p
, tohex(valuelen
));
493 add_string(&p
, tohex(ADDR(pname
)));
494 add_string(&p
, tohex(strlen(RELOC(pname
))));
495 add_string(&p
, "property");
497 return call_prom("interpret", 1, 1, (u32
)(unsigned long) cmd
);
500 /* We can't use the standard versions because of RELOC headaches. */
501 #define isxdigit(c) (('0' <= (c) && (c) <= '9') \
502 || ('a' <= (c) && (c) <= 'f') \
503 || ('A' <= (c) && (c) <= 'F'))
505 #define isdigit(c) ('0' <= (c) && (c) <= '9')
506 #define islower(c) ('a' <= (c) && (c) <= 'z')
507 #define toupper(c) (islower(c) ? ((c) - 'a' + 'A') : (c))
509 unsigned long prom_strtoul(const char *cp
, const char **endp
)
511 unsigned long result
= 0, base
= 10, value
;
516 if (toupper(*cp
) == 'X') {
522 while (isxdigit(*cp
) &&
523 (value
= isdigit(*cp
) ? *cp
- '0' : toupper(*cp
) - 'A' + 10) < base
) {
524 result
= result
* base
+ value
;
534 unsigned long prom_memparse(const char *ptr
, const char **retptr
)
536 unsigned long ret
= prom_strtoul(ptr
, retptr
);
540 * We can't use a switch here because GCC *may* generate a
541 * jump table which won't work, because we're not running at
542 * the address we're linked at.
544 if ('G' == **retptr
|| 'g' == **retptr
)
547 if ('M' == **retptr
|| 'm' == **retptr
)
550 if ('K' == **retptr
|| 'k' == **retptr
)
562 * Early parsing of the command line passed to the kernel, used for
563 * "mem=x" and the options that affect the iommu
565 static void __init
early_cmdline_parse(void)
567 struct prom_t
*_prom
= &RELOC(prom
);
572 RELOC(prom_cmd_line
[0]) = 0;
573 p
= RELOC(prom_cmd_line
);
574 if ((long)_prom
->chosen
> 0)
575 l
= prom_getprop(_prom
->chosen
, "bootargs", p
, COMMAND_LINE_SIZE
-1);
576 #ifdef CONFIG_CMDLINE
577 if (l
== 0) /* dbl check */
578 strlcpy(RELOC(prom_cmd_line
),
579 RELOC(CONFIG_CMDLINE
), sizeof(prom_cmd_line
));
580 #endif /* CONFIG_CMDLINE */
581 prom_printf("command line: %s\n", RELOC(prom_cmd_line
));
584 opt
= strstr(RELOC(prom_cmd_line
), RELOC("iommu="));
586 prom_printf("iommu opt is: %s\n", opt
);
588 while (*opt
&& *opt
== ' ')
590 if (!strncmp(opt
, RELOC("off"), 3))
591 RELOC(ppc64_iommu_off
) = 1;
592 else if (!strncmp(opt
, RELOC("force"), 5))
593 RELOC(iommu_force_on
) = 1;
597 opt
= strstr(RELOC(prom_cmd_line
), RELOC("mem="));
600 RELOC(prom_memory_limit
) = prom_memparse(opt
, (const char **)&opt
);
602 /* Align to 16 MB == size of ppc64 large page */
603 RELOC(prom_memory_limit
) = ALIGN(RELOC(prom_memory_limit
), 0x1000000);
609 * crashkernel=size@addr specifies the location to reserve for
612 opt
= strstr(RELOC(prom_cmd_line
), RELOC("crashkernel="));
615 RELOC(prom_crashk_size
) =
616 prom_memparse(opt
, (const char **)&opt
);
618 if (ALIGN(RELOC(prom_crashk_size
), 0x1000000) !=
619 RELOC(prom_crashk_size
)) {
620 prom_printf("Warning: crashkernel size is not "
621 "aligned to 16MB\n");
625 * At present, the crash kernel always run at 32MB.
626 * Just ignore whatever user passed.
628 RELOC(prom_crashk_base
) = 0x2000000;
630 prom_printf("Warning: PPC64 kdump kernel always runs "
637 #ifdef CONFIG_PPC_PSERIES
639 * There are two methods for telling firmware what our capabilities are.
640 * Newer machines have an "ibm,client-architecture-support" method on the
641 * root node. For older machines, we have to call the "process-elf-header"
642 * method in the /packages/elf-loader node, passing it a fake 32-bit
643 * ELF header containing a couple of PT_NOTE sections that contain
644 * structures that contain various information.
648 * New method - extensible architecture description vector.
650 * Because the description vector contains a mix of byte and word
651 * values, we declare it as an unsigned char array, and use this
652 * macro to put word values in.
654 #define W(x) ((x) >> 24) & 0xff, ((x) >> 16) & 0xff, \
655 ((x) >> 8) & 0xff, (x) & 0xff
657 /* Option vector bits - generic bits in byte 1 */
658 #define OV_IGNORE 0x80 /* ignore this vector */
659 #define OV_CESSATION_POLICY 0x40 /* halt if unsupported option present*/
661 /* Option vector 1: processor architectures supported */
662 #define OV1_PPC_2_00 0x80 /* set if we support PowerPC 2.00 */
663 #define OV1_PPC_2_01 0x40 /* set if we support PowerPC 2.01 */
664 #define OV1_PPC_2_02 0x20 /* set if we support PowerPC 2.02 */
665 #define OV1_PPC_2_03 0x10 /* set if we support PowerPC 2.03 */
666 #define OV1_PPC_2_04 0x08 /* set if we support PowerPC 2.04 */
667 #define OV1_PPC_2_05 0x04 /* set if we support PowerPC 2.05 */
669 /* Option vector 2: Open Firmware options supported */
670 #define OV2_REAL_MODE 0x20 /* set if we want OF in real mode */
672 /* Option vector 3: processor options supported */
673 #define OV3_FP 0x80 /* floating point */
674 #define OV3_VMX 0x40 /* VMX/Altivec */
676 /* Option vector 5: PAPR/OF options supported */
677 #define OV5_LPAR 0x80 /* logical partitioning supported */
678 #define OV5_SPLPAR 0x40 /* shared-processor LPAR supported */
679 /* ibm,dynamic-reconfiguration-memory property supported */
680 #define OV5_DRCONF_MEMORY 0x20
681 #define OV5_LARGE_PAGES 0x10 /* large pages supported */
684 * The architecture vector has an array of PVR mask/value pairs,
685 * followed by # option vectors - 1, followed by the option vectors.
687 static unsigned char ibm_architecture_vec
[] = {
688 W(0xfffe0000), W(0x003a0000), /* POWER5/POWER5+ */
689 W(0xffff0000), W(0x003e0000), /* POWER6 */
690 W(0xfffffffe), W(0x0f000001), /* all 2.04-compliant and earlier */
691 5 - 1, /* 5 option vectors */
693 /* option vector 1: processor architectures supported */
695 0, /* don't ignore, don't halt */
696 OV1_PPC_2_00
| OV1_PPC_2_01
| OV1_PPC_2_02
| OV1_PPC_2_03
|
697 OV1_PPC_2_04
| OV1_PPC_2_05
,
699 /* option vector 2: Open Firmware options supported */
703 W(0xffffffff), /* real_base */
704 W(0xffffffff), /* real_size */
705 W(0xffffffff), /* virt_base */
706 W(0xffffffff), /* virt_size */
707 W(0xffffffff), /* load_base */
708 W(64), /* 128MB min RMA */
709 W(0xffffffff), /* full client load */
710 0, /* min RMA percentage of total RAM */
711 48, /* max log_2(hash table size) */
713 /* option vector 3: processor options supported */
715 0, /* don't ignore, don't halt */
718 /* option vector 4: IBM PAPR implementation */
722 /* option vector 5: PAPR/OF options */
724 0, /* don't ignore, don't halt */
725 OV5_LPAR
| OV5_SPLPAR
| OV5_LARGE_PAGES
,
728 /* Old method - ELF header with PT_NOTE sections */
729 static struct fake_elf
{
736 char name
[8]; /* "PowerPC" */
750 char name
[24]; /* "IBM,RPA-Client-Config" */
764 .e_ident
= { 0x7f, 'E', 'L', 'F',
765 ELFCLASS32
, ELFDATA2MSB
, EV_CURRENT
},
766 .e_type
= ET_EXEC
, /* yeah right */
768 .e_version
= EV_CURRENT
,
769 .e_phoff
= offsetof(struct fake_elf
, phdr
),
770 .e_phentsize
= sizeof(Elf32_Phdr
),
776 .p_offset
= offsetof(struct fake_elf
, chrpnote
),
777 .p_filesz
= sizeof(struct chrpnote
)
780 .p_offset
= offsetof(struct fake_elf
, rpanote
),
781 .p_filesz
= sizeof(struct rpanote
)
785 .namesz
= sizeof("PowerPC"),
786 .descsz
= sizeof(struct chrpdesc
),
790 .real_mode
= ~0U, /* ~0 means "don't care" */
799 .namesz
= sizeof("IBM,RPA-Client-Config"),
800 .descsz
= sizeof(struct rpadesc
),
802 .name
= "IBM,RPA-Client-Config",
805 .min_rmo_size
= 64, /* in megabytes */
806 .min_rmo_percent
= 0,
807 .max_pft_size
= 48, /* 2^48 bytes max PFT size */
815 static void __init
prom_send_capabilities(void)
817 ihandle elfloader
, root
;
820 root
= call_prom("open", 1, 1, ADDR("/"));
822 /* try calling the ibm,client-architecture-support method */
823 if (call_prom_ret("call-method", 3, 2, &ret
,
824 ADDR("ibm,client-architecture-support"),
826 ADDR(ibm_architecture_vec
)) == 0) {
827 /* the call exists... */
829 prom_printf("WARNING: ibm,client-architecture"
830 "-support call FAILED!\n");
831 call_prom("close", 1, 0, root
);
834 call_prom("close", 1, 0, root
);
837 /* no ibm,client-architecture-support call, try the old way */
838 elfloader
= call_prom("open", 1, 1, ADDR("/packages/elf-loader"));
839 if (elfloader
== 0) {
840 prom_printf("couldn't open /packages/elf-loader\n");
843 call_prom("call-method", 3, 1, ADDR("process-elf-header"),
844 elfloader
, ADDR(&fake_elf
));
845 call_prom("close", 1, 0, elfloader
);
850 * Memory allocation strategy... our layout is normally:
852 * at 14Mb or more we have vmlinux, then a gap and initrd. In some
853 * rare cases, initrd might end up being before the kernel though.
854 * We assume this won't override the final kernel at 0, we have no
855 * provision to handle that in this version, but it should hopefully
858 * alloc_top is set to the top of RMO, eventually shrink down if the
861 * alloc_bottom is set to the top of kernel/initrd
863 * from there, allocations are done this way : rtas is allocated
864 * topmost, and the device-tree is allocated from the bottom. We try
865 * to grow the device-tree allocation as we progress. If we can't,
866 * then we fail, we don't currently have a facility to restart
867 * elsewhere, but that shouldn't be necessary.
869 * Note that calls to reserve_mem have to be done explicitly, memory
870 * allocated with either alloc_up or alloc_down isn't automatically
876 * Allocates memory in the RMO upward from the kernel/initrd
878 * When align is 0, this is a special case, it means to allocate in place
879 * at the current location of alloc_bottom or fail (that is basically
880 * extending the previous allocation). Used for the device-tree flattening
882 static unsigned long __init
alloc_up(unsigned long size
, unsigned long align
)
884 unsigned long base
= RELOC(alloc_bottom
);
885 unsigned long addr
= 0;
888 base
= _ALIGN_UP(base
, align
);
889 prom_debug("alloc_up(%x, %x)\n", size
, align
);
890 if (RELOC(ram_top
) == 0)
891 prom_panic("alloc_up() called with mem not initialized\n");
894 base
= _ALIGN_UP(RELOC(alloc_bottom
), align
);
896 base
= RELOC(alloc_bottom
);
898 for(; (base
+ size
) <= RELOC(alloc_top
);
899 base
= _ALIGN_UP(base
+ 0x100000, align
)) {
900 prom_debug(" trying: 0x%x\n\r", base
);
901 addr
= (unsigned long)prom_claim(base
, size
, 0);
902 if (addr
!= PROM_ERROR
&& addr
!= 0)
910 RELOC(alloc_bottom
) = addr
;
912 prom_debug(" -> %x\n", addr
);
913 prom_debug(" alloc_bottom : %x\n", RELOC(alloc_bottom
));
914 prom_debug(" alloc_top : %x\n", RELOC(alloc_top
));
915 prom_debug(" alloc_top_hi : %x\n", RELOC(alloc_top_high
));
916 prom_debug(" rmo_top : %x\n", RELOC(rmo_top
));
917 prom_debug(" ram_top : %x\n", RELOC(ram_top
));
923 * Allocates memory downward, either from top of RMO, or if highmem
924 * is set, from the top of RAM. Note that this one doesn't handle
925 * failures. It does claim memory if highmem is not set.
927 static unsigned long __init
alloc_down(unsigned long size
, unsigned long align
,
930 unsigned long base
, addr
= 0;
932 prom_debug("alloc_down(%x, %x, %s)\n", size
, align
,
933 highmem
? RELOC("(high)") : RELOC("(low)"));
934 if (RELOC(ram_top
) == 0)
935 prom_panic("alloc_down() called with mem not initialized\n");
938 /* Carve out storage for the TCE table. */
939 addr
= _ALIGN_DOWN(RELOC(alloc_top_high
) - size
, align
);
940 if (addr
<= RELOC(alloc_bottom
))
942 /* Will we bump into the RMO ? If yes, check out that we
943 * didn't overlap existing allocations there, if we did,
944 * we are dead, we must be the first in town !
946 if (addr
< RELOC(rmo_top
)) {
947 /* Good, we are first */
948 if (RELOC(alloc_top
) == RELOC(rmo_top
))
949 RELOC(alloc_top
) = RELOC(rmo_top
) = addr
;
953 RELOC(alloc_top_high
) = addr
;
957 base
= _ALIGN_DOWN(RELOC(alloc_top
) - size
, align
);
958 for (; base
> RELOC(alloc_bottom
);
959 base
= _ALIGN_DOWN(base
- 0x100000, align
)) {
960 prom_debug(" trying: 0x%x\n\r", base
);
961 addr
= (unsigned long)prom_claim(base
, size
, 0);
962 if (addr
!= PROM_ERROR
&& addr
!= 0)
968 RELOC(alloc_top
) = addr
;
971 prom_debug(" -> %x\n", addr
);
972 prom_debug(" alloc_bottom : %x\n", RELOC(alloc_bottom
));
973 prom_debug(" alloc_top : %x\n", RELOC(alloc_top
));
974 prom_debug(" alloc_top_hi : %x\n", RELOC(alloc_top_high
));
975 prom_debug(" rmo_top : %x\n", RELOC(rmo_top
));
976 prom_debug(" ram_top : %x\n", RELOC(ram_top
));
984 static unsigned long __init
prom_next_cell(int s
, cell_t
**cellp
)
989 /* Ignore more than 2 cells */
990 while (s
> sizeof(unsigned long) / 4) {
1006 * Very dumb function for adding to the memory reserve list, but
1007 * we don't need anything smarter at this point
1009 * XXX Eventually check for collisions. They should NEVER happen.
1010 * If problems seem to show up, it would be a good start to track
1013 static void reserve_mem(u64 base
, u64 size
)
1015 u64 top
= base
+ size
;
1016 unsigned long cnt
= RELOC(mem_reserve_cnt
);
1021 /* We need to always keep one empty entry so that we
1022 * have our terminator with "size" set to 0 since we are
1023 * dumb and just copy this entire array to the boot params
1025 base
= _ALIGN_DOWN(base
, PAGE_SIZE
);
1026 top
= _ALIGN_UP(top
, PAGE_SIZE
);
1029 if (cnt
>= (MEM_RESERVE_MAP_SIZE
- 1))
1030 prom_panic("Memory reserve map exhausted !\n");
1031 RELOC(mem_reserve_map
)[cnt
].base
= base
;
1032 RELOC(mem_reserve_map
)[cnt
].size
= size
;
1033 RELOC(mem_reserve_cnt
) = cnt
+ 1;
1037 * Initialize memory allocation mecanism, parse "memory" nodes and
1038 * obtain that way the top of memory and RMO to setup out local allocator
1040 static void __init
prom_init_mem(void)
1043 char *path
, type
[64];
1046 struct prom_t
*_prom
= &RELOC(prom
);
1050 * We iterate the memory nodes to find
1051 * 1) top of RMO (first node)
1055 prom_getprop(_prom
->root
, "#address-cells", &rac
, sizeof(rac
));
1057 prom_getprop(_prom
->root
, "#size-cells", &rsc
, sizeof(rsc
));
1058 prom_debug("root_addr_cells: %x\n", (unsigned long) rac
);
1059 prom_debug("root_size_cells: %x\n", (unsigned long) rsc
);
1061 prom_debug("scanning memory:\n");
1062 path
= RELOC(prom_scratch
);
1064 for (node
= 0; prom_next_node(&node
); ) {
1066 prom_getprop(node
, "device_type", type
, sizeof(type
));
1070 * CHRP Longtrail machines have no device_type
1071 * on the memory node, so check the name instead...
1073 prom_getprop(node
, "name", type
, sizeof(type
));
1075 if (strcmp(type
, RELOC("memory")))
1078 plen
= prom_getprop(node
, "reg", RELOC(regbuf
), sizeof(regbuf
));
1079 if (plen
> sizeof(regbuf
)) {
1080 prom_printf("memory node too large for buffer !\n");
1081 plen
= sizeof(regbuf
);
1084 endp
= p
+ (plen
/ sizeof(cell_t
));
1087 memset(path
, 0, PROM_SCRATCH_SIZE
);
1088 call_prom("package-to-path", 3, 1, node
, path
, PROM_SCRATCH_SIZE
-1);
1089 prom_debug(" node %s :\n", path
);
1090 #endif /* DEBUG_PROM */
1092 while ((endp
- p
) >= (rac
+ rsc
)) {
1093 unsigned long base
, size
;
1095 base
= prom_next_cell(rac
, &p
);
1096 size
= prom_next_cell(rsc
, &p
);
1100 prom_debug(" %x %x\n", base
, size
);
1101 if (base
== 0 && (RELOC(of_platform
) & PLATFORM_LPAR
))
1102 RELOC(rmo_top
) = size
;
1103 if ((base
+ size
) > RELOC(ram_top
))
1104 RELOC(ram_top
) = base
+ size
;
1108 RELOC(alloc_bottom
) = PAGE_ALIGN((unsigned long)&RELOC(_end
) + 0x4000);
1110 /* Check if we have an initrd after the kernel, if we do move our bottom
1113 if (RELOC(prom_initrd_start
)) {
1114 if (RELOC(prom_initrd_end
) > RELOC(alloc_bottom
))
1115 RELOC(alloc_bottom
) = PAGE_ALIGN(RELOC(prom_initrd_end
));
1119 * If prom_memory_limit is set we reduce the upper limits *except* for
1120 * alloc_top_high. This must be the real top of RAM so we can put
1124 RELOC(alloc_top_high
) = RELOC(ram_top
);
1126 if (RELOC(prom_memory_limit
)) {
1127 if (RELOC(prom_memory_limit
) <= RELOC(alloc_bottom
)) {
1128 prom_printf("Ignoring mem=%x <= alloc_bottom.\n",
1129 RELOC(prom_memory_limit
));
1130 RELOC(prom_memory_limit
) = 0;
1131 } else if (RELOC(prom_memory_limit
) >= RELOC(ram_top
)) {
1132 prom_printf("Ignoring mem=%x >= ram_top.\n",
1133 RELOC(prom_memory_limit
));
1134 RELOC(prom_memory_limit
) = 0;
1136 RELOC(ram_top
) = RELOC(prom_memory_limit
);
1137 RELOC(rmo_top
) = min(RELOC(rmo_top
), RELOC(prom_memory_limit
));
1142 * Setup our top alloc point, that is top of RMO or top of
1143 * segment 0 when running non-LPAR.
1144 * Some RS64 machines have buggy firmware where claims up at
1145 * 1GB fail. Cap at 768MB as a workaround.
1146 * Since 768MB is plenty of room, and we need to cap to something
1147 * reasonable on 32-bit, cap at 768MB on all machines.
1149 if (!RELOC(rmo_top
))
1150 RELOC(rmo_top
) = RELOC(ram_top
);
1151 RELOC(rmo_top
) = min(0x30000000ul
, RELOC(rmo_top
));
1152 RELOC(alloc_top
) = RELOC(rmo_top
);
1154 prom_printf("memory layout at init:\n");
1155 prom_printf(" memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit
));
1156 prom_printf(" alloc_bottom : %x\n", RELOC(alloc_bottom
));
1157 prom_printf(" alloc_top : %x\n", RELOC(alloc_top
));
1158 prom_printf(" alloc_top_hi : %x\n", RELOC(alloc_top_high
));
1159 prom_printf(" rmo_top : %x\n", RELOC(rmo_top
));
1160 prom_printf(" ram_top : %x\n", RELOC(ram_top
));
1162 if (RELOC(prom_crashk_base
)) {
1163 prom_printf(" crashk_base : %x\n", RELOC(prom_crashk_base
));
1164 prom_printf(" crashk_size : %x\n", RELOC(prom_crashk_size
));
1171 * Allocate room for and instantiate RTAS
1173 static void __init
prom_instantiate_rtas(void)
1177 u32 base
, entry
= 0;
1180 prom_debug("prom_instantiate_rtas: start...\n");
1182 rtas_node
= call_prom("finddevice", 1, 1, ADDR("/rtas"));
1183 prom_debug("rtas_node: %x\n", rtas_node
);
1184 if (!PHANDLE_VALID(rtas_node
))
1187 prom_getprop(rtas_node
, "rtas-size", &size
, sizeof(size
));
1191 base
= alloc_down(size
, PAGE_SIZE
, 0);
1193 prom_printf("RTAS allocation failed !\n");
1197 rtas_inst
= call_prom("open", 1, 1, ADDR("/rtas"));
1198 if (!IHANDLE_VALID(rtas_inst
)) {
1199 prom_printf("opening rtas package failed (%x)\n", rtas_inst
);
1203 prom_printf("instantiating rtas at 0x%x ...", base
);
1205 if (call_prom_ret("call-method", 3, 2, &entry
,
1206 ADDR("instantiate-rtas"),
1207 rtas_inst
, base
) != 0
1209 prom_printf(" failed\n");
1212 prom_printf(" done\n");
1214 reserve_mem(base
, size
);
1216 prom_setprop(rtas_node
, "/rtas", "linux,rtas-base",
1217 &base
, sizeof(base
));
1218 prom_setprop(rtas_node
, "/rtas", "linux,rtas-entry",
1219 &entry
, sizeof(entry
));
1221 prom_debug("rtas base = 0x%x\n", base
);
1222 prom_debug("rtas entry = 0x%x\n", entry
);
1223 prom_debug("rtas size = 0x%x\n", (long)size
);
1225 prom_debug("prom_instantiate_rtas: end...\n");
1230 * Allocate room for and initialize TCE tables
1232 static void __init
prom_initialize_tce_table(void)
1236 char compatible
[64], type
[64], model
[64];
1237 char *path
= RELOC(prom_scratch
);
1239 u32 minalign
, minsize
;
1240 u64 tce_entry
, *tce_entryp
;
1241 u64 local_alloc_top
, local_alloc_bottom
;
1244 if (RELOC(ppc64_iommu_off
))
1247 prom_debug("starting prom_initialize_tce_table\n");
1249 /* Cache current top of allocs so we reserve a single block */
1250 local_alloc_top
= RELOC(alloc_top_high
);
1251 local_alloc_bottom
= local_alloc_top
;
1253 /* Search all nodes looking for PHBs. */
1254 for (node
= 0; prom_next_node(&node
); ) {
1258 prom_getprop(node
, "compatible",
1259 compatible
, sizeof(compatible
));
1260 prom_getprop(node
, "device_type", type
, sizeof(type
));
1261 prom_getprop(node
, "model", model
, sizeof(model
));
1263 if ((type
[0] == 0) || (strstr(type
, RELOC("pci")) == NULL
))
1266 /* Keep the old logic in tack to avoid regression. */
1267 if (compatible
[0] != 0) {
1268 if ((strstr(compatible
, RELOC("python")) == NULL
) &&
1269 (strstr(compatible
, RELOC("Speedwagon")) == NULL
) &&
1270 (strstr(compatible
, RELOC("Winnipeg")) == NULL
))
1272 } else if (model
[0] != 0) {
1273 if ((strstr(model
, RELOC("ython")) == NULL
) &&
1274 (strstr(model
, RELOC("peedwagon")) == NULL
) &&
1275 (strstr(model
, RELOC("innipeg")) == NULL
))
1279 if (prom_getprop(node
, "tce-table-minalign", &minalign
,
1280 sizeof(minalign
)) == PROM_ERROR
)
1282 if (prom_getprop(node
, "tce-table-minsize", &minsize
,
1283 sizeof(minsize
)) == PROM_ERROR
)
1284 minsize
= 4UL << 20;
1287 * Even though we read what OF wants, we just set the table
1288 * size to 4 MB. This is enough to map 2GB of PCI DMA space.
1289 * By doing this, we avoid the pitfalls of trying to DMA to
1290 * MMIO space and the DMA alias hole.
1292 * On POWER4, firmware sets the TCE region by assuming
1293 * each TCE table is 8MB. Using this memory for anything
1294 * else will impact performance, so we always allocate 8MB.
1297 if (__is_processor(PV_POWER4
) || __is_processor(PV_POWER4p
))
1298 minsize
= 8UL << 20;
1300 minsize
= 4UL << 20;
1302 /* Align to the greater of the align or size */
1303 align
= max(minalign
, minsize
);
1304 base
= alloc_down(minsize
, align
, 1);
1306 prom_panic("ERROR, cannot find space for TCE table.\n");
1307 if (base
< local_alloc_bottom
)
1308 local_alloc_bottom
= base
;
1310 /* It seems OF doesn't null-terminate the path :-( */
1311 memset(path
, 0, sizeof(path
));
1312 /* Call OF to setup the TCE hardware */
1313 if (call_prom("package-to-path", 3, 1, node
,
1314 path
, PROM_SCRATCH_SIZE
-1) == PROM_ERROR
) {
1315 prom_printf("package-to-path failed\n");
1318 /* Save away the TCE table attributes for later use. */
1319 prom_setprop(node
, path
, "linux,tce-base", &base
, sizeof(base
));
1320 prom_setprop(node
, path
, "linux,tce-size", &minsize
, sizeof(minsize
));
1322 prom_debug("TCE table: %s\n", path
);
1323 prom_debug("\tnode = 0x%x\n", node
);
1324 prom_debug("\tbase = 0x%x\n", base
);
1325 prom_debug("\tsize = 0x%x\n", minsize
);
1327 /* Initialize the table to have a one-to-one mapping
1328 * over the allocated size.
1330 tce_entryp
= (unsigned long *)base
;
1331 for (i
= 0; i
< (minsize
>> 3) ;tce_entryp
++, i
++) {
1332 tce_entry
= (i
<< PAGE_SHIFT
);
1334 *tce_entryp
= tce_entry
;
1337 prom_printf("opening PHB %s", path
);
1338 phb_node
= call_prom("open", 1, 1, path
);
1340 prom_printf("... failed\n");
1342 prom_printf("... done\n");
1344 call_prom("call-method", 6, 0, ADDR("set-64-bit-addressing"),
1345 phb_node
, -1, minsize
,
1346 (u32
) base
, (u32
) (base
>> 32));
1347 call_prom("close", 1, 0, phb_node
);
1350 reserve_mem(local_alloc_bottom
, local_alloc_top
- local_alloc_bottom
);
1352 if (RELOC(prom_memory_limit
)) {
1354 * We align the start to a 16MB boundary so we can map
1355 * the TCE area using large pages if possible.
1356 * The end should be the top of RAM so no need to align it.
1358 RELOC(prom_tce_alloc_start
) = _ALIGN_DOWN(local_alloc_bottom
,
1360 RELOC(prom_tce_alloc_end
) = local_alloc_top
;
1363 /* Flag the first invalid entry */
1364 prom_debug("ending prom_initialize_tce_table\n");
1369 * With CHRP SMP we need to use the OF to start the other processors.
1370 * We can't wait until smp_boot_cpus (the OF is trashed by then)
1371 * so we have to put the processors into a holding pattern controlled
1372 * by the kernel (not OF) before we destroy the OF.
1374 * This uses a chunk of low memory, puts some holding pattern
1375 * code there and sends the other processors off to there until
1376 * smp_boot_cpus tells them to do something. The holding pattern
1377 * checks that address until its cpu # is there, when it is that
1378 * cpu jumps to __secondary_start(). smp_boot_cpus() takes care
1379 * of setting those values.
1381 * We also use physical address 0x4 here to tell when a cpu
1382 * is in its holding pattern code.
1386 extern void __secondary_hold(void);
1387 extern unsigned long __secondary_hold_spinloop
;
1388 extern unsigned long __secondary_hold_acknowledge
;
1391 * We want to reference the copy of __secondary_hold_* in the
1392 * 0 - 0x100 address range
1394 #define LOW_ADDR(x) (((unsigned long) &(x)) & 0xff)
1396 static void __init
prom_hold_cpus(void)
1403 unsigned int interrupt_server
[MAX_CPU_THREADS
];
1404 unsigned int cpu_threads
, hw_cpu_num
;
1406 struct prom_t
*_prom
= &RELOC(prom
);
1407 unsigned long *spinloop
1408 = (void *) LOW_ADDR(__secondary_hold_spinloop
);
1409 unsigned long *acknowledge
1410 = (void *) LOW_ADDR(__secondary_hold_acknowledge
);
1412 /* __secondary_hold is actually a descriptor, not the text address */
1413 unsigned long secondary_hold
1414 = __pa(*PTRRELOC((unsigned long *)__secondary_hold
));
1416 unsigned long secondary_hold
= LOW_ADDR(__secondary_hold
);
1419 prom_debug("prom_hold_cpus: start...\n");
1420 prom_debug(" 1) spinloop = 0x%x\n", (unsigned long)spinloop
);
1421 prom_debug(" 1) *spinloop = 0x%x\n", *spinloop
);
1422 prom_debug(" 1) acknowledge = 0x%x\n",
1423 (unsigned long)acknowledge
);
1424 prom_debug(" 1) *acknowledge = 0x%x\n", *acknowledge
);
1425 prom_debug(" 1) secondary_hold = 0x%x\n", secondary_hold
);
1427 /* Set the common spinloop variable, so all of the secondary cpus
1428 * will block when they are awakened from their OF spinloop.
1429 * This must occur for both SMP and non SMP kernels, since OF will
1430 * be trashed when we move the kernel.
1435 for (node
= 0; prom_next_node(&node
); ) {
1437 prom_getprop(node
, "device_type", type
, sizeof(type
));
1438 if (strcmp(type
, RELOC("cpu")) != 0)
1441 /* Skip non-configured cpus. */
1442 if (prom_getprop(node
, "status", type
, sizeof(type
)) > 0)
1443 if (strcmp(type
, RELOC("okay")) != 0)
1447 prom_getprop(node
, "reg", ®
, sizeof(reg
));
1449 prom_debug("\ncpuid = 0x%x\n", cpuid
);
1450 prom_debug("cpu hw idx = 0x%x\n", reg
);
1452 /* Init the acknowledge var which will be reset by
1453 * the secondary cpu when it awakens from its OF
1456 *acknowledge
= (unsigned long)-1;
1458 propsize
= prom_getprop(node
, "ibm,ppc-interrupt-server#s",
1460 sizeof(interrupt_server
));
1462 /* no property. old hardware has no SMT */
1464 interrupt_server
[0] = reg
; /* fake it with phys id */
1466 /* We have a threaded processor */
1467 cpu_threads
= propsize
/ sizeof(u32
);
1468 if (cpu_threads
> MAX_CPU_THREADS
) {
1469 prom_printf("SMT: too many threads!\n"
1470 "SMT: found %x, max is %x\n",
1471 cpu_threads
, MAX_CPU_THREADS
);
1472 cpu_threads
= 1; /* ToDo: panic? */
1476 hw_cpu_num
= interrupt_server
[0];
1477 if (hw_cpu_num
!= _prom
->cpu
) {
1478 /* Primary Thread of non-boot cpu */
1479 prom_printf("%x : starting cpu hw idx %x... ", cpuid
, reg
);
1480 call_prom("start-cpu", 3, 0, node
,
1481 secondary_hold
, reg
);
1483 for (i
= 0; (i
< 100000000) &&
1484 (*acknowledge
== ((unsigned long)-1)); i
++ )
1487 if (*acknowledge
== reg
)
1488 prom_printf("done\n");
1490 prom_printf("failed: %x\n", *acknowledge
);
1494 prom_printf("%x : boot cpu %x\n", cpuid
, reg
);
1495 #endif /* CONFIG_SMP */
1497 /* Reserve cpu #s for secondary threads. They start later. */
1498 cpuid
+= cpu_threads
;
1501 if (cpuid
> NR_CPUS
)
1502 prom_printf("WARNING: maximum CPUs (" __stringify(NR_CPUS
)
1503 ") exceeded: ignoring extras\n");
1505 prom_debug("prom_hold_cpus: end...\n");
1509 static void __init
prom_init_client_services(unsigned long pp
)
1511 struct prom_t
*_prom
= &RELOC(prom
);
1513 /* Get a handle to the prom entry point before anything else */
1514 RELOC(prom_entry
) = pp
;
1516 /* get a handle for the stdout device */
1517 _prom
->chosen
= call_prom("finddevice", 1, 1, ADDR("/chosen"));
1518 if (!PHANDLE_VALID(_prom
->chosen
))
1519 prom_panic("cannot find chosen"); /* msg won't be printed :( */
1521 /* get device tree root */
1522 _prom
->root
= call_prom("finddevice", 1, 1, ADDR("/"));
1523 if (!PHANDLE_VALID(_prom
->root
))
1524 prom_panic("cannot find device tree root"); /* msg won't be printed :( */
1531 * For really old powermacs, we need to map things we claim.
1532 * For that, we need the ihandle of the mmu.
1533 * Also, on the longtrail, we need to work around other bugs.
1535 static void __init
prom_find_mmu(void)
1537 struct prom_t
*_prom
= &RELOC(prom
);
1541 oprom
= call_prom("finddevice", 1, 1, ADDR("/openprom"));
1542 if (!PHANDLE_VALID(oprom
))
1544 if (prom_getprop(oprom
, "model", version
, sizeof(version
)) <= 0)
1546 version
[sizeof(version
) - 1] = 0;
1547 /* XXX might need to add other versions here */
1548 if (strcmp(version
, "Open Firmware, 1.0.5") == 0)
1549 of_workarounds
= OF_WA_CLAIM
;
1550 else if (strncmp(version
, "FirmWorks,3.", 12) == 0) {
1551 of_workarounds
= OF_WA_CLAIM
| OF_WA_LONGTRAIL
;
1552 call_prom("interpret", 1, 1, "dev /memory 0 to allow-reclaim");
1555 _prom
->memory
= call_prom("open", 1, 1, ADDR("/memory"));
1556 prom_getprop(_prom
->chosen
, "mmu", &_prom
->mmumap
,
1557 sizeof(_prom
->mmumap
));
1558 if (!IHANDLE_VALID(_prom
->memory
) || !IHANDLE_VALID(_prom
->mmumap
))
1559 of_workarounds
&= ~OF_WA_CLAIM
; /* hmmm */
1562 #define prom_find_mmu()
1565 static void __init
prom_init_stdout(void)
1567 struct prom_t
*_prom
= &RELOC(prom
);
1568 char *path
= RELOC(of_stdout_device
);
1572 if (prom_getprop(_prom
->chosen
, "stdout", &val
, sizeof(val
)) <= 0)
1573 prom_panic("cannot find stdout");
1575 _prom
->stdout
= val
;
1577 /* Get the full OF pathname of the stdout device */
1578 memset(path
, 0, 256);
1579 call_prom("instance-to-path", 3, 1, _prom
->stdout
, path
, 255);
1580 val
= call_prom("instance-to-package", 1, 1, _prom
->stdout
);
1581 prom_setprop(_prom
->chosen
, "/chosen", "linux,stdout-package",
1583 prom_printf("OF stdout device is: %s\n", RELOC(of_stdout_device
));
1584 prom_setprop(_prom
->chosen
, "/chosen", "linux,stdout-path",
1585 path
, strlen(path
) + 1);
1587 /* If it's a display, note it */
1588 memset(type
, 0, sizeof(type
));
1589 prom_getprop(val
, "device_type", type
, sizeof(type
));
1590 if (strcmp(type
, RELOC("display")) == 0)
1591 prom_setprop(val
, path
, "linux,boot-display", NULL
, 0);
1594 static void __init
prom_close_stdin(void)
1596 struct prom_t
*_prom
= &RELOC(prom
);
1599 if (prom_getprop(_prom
->chosen
, "stdin", &val
, sizeof(val
)) > 0)
1600 call_prom("close", 1, 0, val
);
1603 static int __init
prom_find_machine_type(void)
1605 struct prom_t
*_prom
= &RELOC(prom
);
1613 /* Look for a PowerMac */
1614 len
= prom_getprop(_prom
->root
, "compatible",
1615 compat
, sizeof(compat
)-1);
1619 char *p
= &compat
[i
];
1623 if (strstr(p
, RELOC("Power Macintosh")) ||
1624 strstr(p
, RELOC("MacRISC")))
1625 return PLATFORM_POWERMAC
;
1627 /* We must make sure we don't detect the IBM Cell
1628 * blades as pSeries due to some firmware issues,
1631 if (strstr(p
, RELOC("IBM,CBEA")) ||
1632 strstr(p
, RELOC("IBM,CPBW-1.0")))
1633 return PLATFORM_GENERIC
;
1634 #endif /* CONFIG_PPC64 */
1639 /* If not a mac, try to figure out if it's an IBM pSeries or any other
1640 * PAPR compliant platform. We assume it is if :
1641 * - /device_type is "chrp" (please, do NOT use that for future
1645 len
= prom_getprop(_prom
->root
, "device_type",
1646 compat
, sizeof(compat
)-1);
1648 return PLATFORM_GENERIC
;
1649 if (strcmp(compat
, RELOC("chrp")))
1650 return PLATFORM_GENERIC
;
1652 /* Default to pSeries. We need to know if we are running LPAR */
1653 rtas
= call_prom("finddevice", 1, 1, ADDR("/rtas"));
1654 if (!PHANDLE_VALID(rtas
))
1655 return PLATFORM_GENERIC
;
1656 x
= prom_getproplen(rtas
, "ibm,hypertas-functions");
1657 if (x
!= PROM_ERROR
) {
1658 prom_printf("Hypertas detected, assuming LPAR !\n");
1659 return PLATFORM_PSERIES_LPAR
;
1661 return PLATFORM_PSERIES
;
1663 return PLATFORM_GENERIC
;
1667 static int __init
prom_set_color(ihandle ih
, int i
, int r
, int g
, int b
)
1669 return call_prom("call-method", 6, 1, ADDR("color!"), ih
, i
, b
, g
, r
);
1673 * If we have a display that we don't know how to drive,
1674 * we will want to try to execute OF's open method for it
1675 * later. However, OF will probably fall over if we do that
1676 * we've taken over the MMU.
1677 * So we check whether we will need to open the display,
1678 * and if so, open it now.
1680 static void __init
prom_check_displays(void)
1682 char type
[16], *path
;
1687 static unsigned char default_colors
[] = {
1705 const unsigned char *clut
;
1707 prom_printf("Looking for displays\n");
1708 for (node
= 0; prom_next_node(&node
); ) {
1709 memset(type
, 0, sizeof(type
));
1710 prom_getprop(node
, "device_type", type
, sizeof(type
));
1711 if (strcmp(type
, RELOC("display")) != 0)
1714 /* It seems OF doesn't null-terminate the path :-( */
1715 path
= RELOC(prom_scratch
);
1716 memset(path
, 0, PROM_SCRATCH_SIZE
);
1719 * leave some room at the end of the path for appending extra
1722 if (call_prom("package-to-path", 3, 1, node
, path
,
1723 PROM_SCRATCH_SIZE
-10) == PROM_ERROR
)
1725 prom_printf("found display : %s, opening ... ", path
);
1727 ih
= call_prom("open", 1, 1, path
);
1729 prom_printf("failed\n");
1734 prom_printf("done\n");
1735 prom_setprop(node
, path
, "linux,opened", NULL
, 0);
1737 /* Setup a usable color table when the appropriate
1738 * method is available. Should update this to set-colors */
1739 clut
= RELOC(default_colors
);
1740 for (i
= 0; i
< 32; i
++, clut
+= 3)
1741 if (prom_set_color(ih
, i
, clut
[0], clut
[1],
1745 #ifdef CONFIG_LOGO_LINUX_CLUT224
1746 clut
= PTRRELOC(RELOC(logo_linux_clut224
.clut
));
1747 for (i
= 0; i
< RELOC(logo_linux_clut224
.clutsize
); i
++, clut
+= 3)
1748 if (prom_set_color(ih
, i
+ 32, clut
[0], clut
[1],
1751 #endif /* CONFIG_LOGO_LINUX_CLUT224 */
1756 /* Return (relocated) pointer to this much memory: moves initrd if reqd. */
1757 static void __init
*make_room(unsigned long *mem_start
, unsigned long *mem_end
,
1758 unsigned long needed
, unsigned long align
)
1762 *mem_start
= _ALIGN(*mem_start
, align
);
1763 while ((*mem_start
+ needed
) > *mem_end
) {
1764 unsigned long room
, chunk
;
1766 prom_debug("Chunk exhausted, claiming more at %x...\n",
1767 RELOC(alloc_bottom
));
1768 room
= RELOC(alloc_top
) - RELOC(alloc_bottom
);
1769 if (room
> DEVTREE_CHUNK_SIZE
)
1770 room
= DEVTREE_CHUNK_SIZE
;
1771 if (room
< PAGE_SIZE
)
1772 prom_panic("No memory for flatten_device_tree (no room)");
1773 chunk
= alloc_up(room
, 0);
1775 prom_panic("No memory for flatten_device_tree (claim failed)");
1776 *mem_end
= RELOC(alloc_top
);
1779 ret
= (void *)*mem_start
;
1780 *mem_start
+= needed
;
1785 #define dt_push_token(token, mem_start, mem_end) \
1786 do { *((u32 *)make_room(mem_start, mem_end, 4, 4)) = token; } while(0)
1788 static unsigned long __init
dt_find_string(char *str
)
1792 s
= os
= (char *)RELOC(dt_string_start
);
1794 while (s
< (char *)RELOC(dt_string_end
)) {
1795 if (strcmp(s
, str
) == 0)
1803 * The Open Firmware 1275 specification states properties must be 31 bytes or
1804 * less, however not all firmwares obey this. Make it 64 bytes to be safe.
1806 #define MAX_PROPERTY_NAME 64
1808 static void __init
scan_dt_build_strings(phandle node
,
1809 unsigned long *mem_start
,
1810 unsigned long *mem_end
)
1812 char *prev_name
, *namep
, *sstart
;
1816 sstart
= (char *)RELOC(dt_string_start
);
1818 /* get and store all property names */
1819 prev_name
= RELOC("");
1821 /* 64 is max len of name including nul. */
1822 namep
= make_room(mem_start
, mem_end
, MAX_PROPERTY_NAME
, 1);
1823 if (call_prom("nextprop", 3, 1, node
, prev_name
, namep
) != 1) {
1824 /* No more nodes: unwind alloc */
1825 *mem_start
= (unsigned long)namep
;
1830 if (strcmp(namep
, RELOC("name")) == 0) {
1831 *mem_start
= (unsigned long)namep
;
1832 prev_name
= RELOC("name");
1835 /* get/create string entry */
1836 soff
= dt_find_string(namep
);
1838 *mem_start
= (unsigned long)namep
;
1839 namep
= sstart
+ soff
;
1841 /* Trim off some if we can */
1842 *mem_start
= (unsigned long)namep
+ strlen(namep
) + 1;
1843 RELOC(dt_string_end
) = *mem_start
;
1848 /* do all our children */
1849 child
= call_prom("child", 1, 1, node
);
1850 while (child
!= 0) {
1851 scan_dt_build_strings(child
, mem_start
, mem_end
);
1852 child
= call_prom("peer", 1, 1, child
);
1856 static void __init
scan_dt_build_struct(phandle node
, unsigned long *mem_start
,
1857 unsigned long *mem_end
)
1860 char *namep
, *prev_name
, *sstart
, *p
, *ep
, *lp
, *path
;
1862 unsigned char *valp
;
1863 static char pname
[MAX_PROPERTY_NAME
];
1866 dt_push_token(OF_DT_BEGIN_NODE
, mem_start
, mem_end
);
1868 /* get the node's full name */
1869 namep
= (char *)*mem_start
;
1870 room
= *mem_end
- *mem_start
;
1873 l
= call_prom("package-to-path", 3, 1, node
, namep
, room
);
1875 /* Didn't fit? Get more room. */
1877 if (l
>= *mem_end
- *mem_start
)
1878 namep
= make_room(mem_start
, mem_end
, l
+1, 1);
1879 call_prom("package-to-path", 3, 1, node
, namep
, l
);
1883 /* Fixup an Apple bug where they have bogus \0 chars in the
1884 * middle of the path in some properties, and extract
1885 * the unit name (everything after the last '/').
1887 for (lp
= p
= namep
, ep
= namep
+ l
; p
< ep
; p
++) {
1894 *mem_start
= _ALIGN((unsigned long)lp
+ 1, 4);
1897 /* get it again for debugging */
1898 path
= RELOC(prom_scratch
);
1899 memset(path
, 0, PROM_SCRATCH_SIZE
);
1900 call_prom("package-to-path", 3, 1, node
, path
, PROM_SCRATCH_SIZE
-1);
1902 /* get and store all properties */
1903 prev_name
= RELOC("");
1904 sstart
= (char *)RELOC(dt_string_start
);
1906 if (call_prom("nextprop", 3, 1, node
, prev_name
,
1911 if (strcmp(RELOC(pname
), RELOC("name")) == 0) {
1912 prev_name
= RELOC("name");
1916 /* find string offset */
1917 soff
= dt_find_string(RELOC(pname
));
1919 prom_printf("WARNING: Can't find string index for"
1920 " <%s>, node %s\n", RELOC(pname
), path
);
1923 prev_name
= sstart
+ soff
;
1926 l
= call_prom("getproplen", 2, 1, node
, RELOC(pname
));
1929 if (l
== PROM_ERROR
)
1931 if (l
> MAX_PROPERTY_LENGTH
) {
1932 prom_printf("WARNING: ignoring large property ");
1933 /* It seems OF doesn't null-terminate the path :-( */
1934 prom_printf("[%s] ", path
);
1935 prom_printf("%s length 0x%x\n", RELOC(pname
), l
);
1939 /* push property head */
1940 dt_push_token(OF_DT_PROP
, mem_start
, mem_end
);
1941 dt_push_token(l
, mem_start
, mem_end
);
1942 dt_push_token(soff
, mem_start
, mem_end
);
1944 /* push property content */
1945 valp
= make_room(mem_start
, mem_end
, l
, 4);
1946 call_prom("getprop", 4, 1, node
, RELOC(pname
), valp
, l
);
1947 *mem_start
= _ALIGN(*mem_start
, 4);
1950 /* Add a "linux,phandle" property. */
1951 soff
= dt_find_string(RELOC("linux,phandle"));
1953 prom_printf("WARNING: Can't find string index for"
1954 " <linux-phandle> node %s\n", path
);
1956 dt_push_token(OF_DT_PROP
, mem_start
, mem_end
);
1957 dt_push_token(4, mem_start
, mem_end
);
1958 dt_push_token(soff
, mem_start
, mem_end
);
1959 valp
= make_room(mem_start
, mem_end
, 4, 4);
1960 *(u32
*)valp
= node
;
1963 /* do all our children */
1964 child
= call_prom("child", 1, 1, node
);
1965 while (child
!= 0) {
1966 scan_dt_build_struct(child
, mem_start
, mem_end
);
1967 child
= call_prom("peer", 1, 1, child
);
1970 dt_push_token(OF_DT_END_NODE
, mem_start
, mem_end
);
1973 static void __init
flatten_device_tree(void)
1976 unsigned long mem_start
, mem_end
, room
;
1977 struct boot_param_header
*hdr
;
1978 struct prom_t
*_prom
= &RELOC(prom
);
1983 * Check how much room we have between alloc top & bottom (+/- a
1984 * few pages), crop to 4Mb, as this is our "chuck" size
1986 room
= RELOC(alloc_top
) - RELOC(alloc_bottom
) - 0x4000;
1987 if (room
> DEVTREE_CHUNK_SIZE
)
1988 room
= DEVTREE_CHUNK_SIZE
;
1989 prom_debug("starting device tree allocs at %x\n", RELOC(alloc_bottom
));
1991 /* Now try to claim that */
1992 mem_start
= (unsigned long)alloc_up(room
, PAGE_SIZE
);
1994 prom_panic("Can't allocate initial device-tree chunk\n");
1995 mem_end
= RELOC(alloc_top
);
1997 /* Get root of tree */
1998 root
= call_prom("peer", 1, 1, (phandle
)0);
1999 if (root
== (phandle
)0)
2000 prom_panic ("couldn't get device tree root\n");
2002 /* Build header and make room for mem rsv map */
2003 mem_start
= _ALIGN(mem_start
, 4);
2004 hdr
= make_room(&mem_start
, &mem_end
,
2005 sizeof(struct boot_param_header
), 4);
2006 RELOC(dt_header_start
) = (unsigned long)hdr
;
2007 rsvmap
= make_room(&mem_start
, &mem_end
, sizeof(mem_reserve_map
), 8);
2009 /* Start of strings */
2010 mem_start
= PAGE_ALIGN(mem_start
);
2011 RELOC(dt_string_start
) = mem_start
;
2012 mem_start
+= 4; /* hole */
2014 /* Add "linux,phandle" in there, we'll need it */
2015 namep
= make_room(&mem_start
, &mem_end
, 16, 1);
2016 strcpy(namep
, RELOC("linux,phandle"));
2017 mem_start
= (unsigned long)namep
+ strlen(namep
) + 1;
2019 /* Build string array */
2020 prom_printf("Building dt strings...\n");
2021 scan_dt_build_strings(root
, &mem_start
, &mem_end
);
2022 RELOC(dt_string_end
) = mem_start
;
2024 /* Build structure */
2025 mem_start
= PAGE_ALIGN(mem_start
);
2026 RELOC(dt_struct_start
) = mem_start
;
2027 prom_printf("Building dt structure...\n");
2028 scan_dt_build_struct(root
, &mem_start
, &mem_end
);
2029 dt_push_token(OF_DT_END
, &mem_start
, &mem_end
);
2030 RELOC(dt_struct_end
) = PAGE_ALIGN(mem_start
);
2033 hdr
->boot_cpuid_phys
= _prom
->cpu
;
2034 hdr
->magic
= OF_DT_HEADER
;
2035 hdr
->totalsize
= RELOC(dt_struct_end
) - RELOC(dt_header_start
);
2036 hdr
->off_dt_struct
= RELOC(dt_struct_start
) - RELOC(dt_header_start
);
2037 hdr
->off_dt_strings
= RELOC(dt_string_start
) - RELOC(dt_header_start
);
2038 hdr
->dt_strings_size
= RELOC(dt_string_end
) - RELOC(dt_string_start
);
2039 hdr
->off_mem_rsvmap
= ((unsigned long)rsvmap
) - RELOC(dt_header_start
);
2040 hdr
->version
= OF_DT_VERSION
;
2041 /* Version 16 is not backward compatible */
2042 hdr
->last_comp_version
= 0x10;
2044 /* Reserve the whole thing and copy the reserve map in, we
2045 * also bump mem_reserve_cnt to cause further reservations to
2046 * fail since it's too late.
2048 reserve_mem(RELOC(dt_header_start
), hdr
->totalsize
);
2049 memcpy(rsvmap
, RELOC(mem_reserve_map
), sizeof(mem_reserve_map
));
2054 prom_printf("reserved memory map:\n");
2055 for (i
= 0; i
< RELOC(mem_reserve_cnt
); i
++)
2056 prom_printf(" %x - %x\n",
2057 RELOC(mem_reserve_map
)[i
].base
,
2058 RELOC(mem_reserve_map
)[i
].size
);
2061 RELOC(mem_reserve_cnt
) = MEM_RESERVE_MAP_SIZE
;
2063 prom_printf("Device tree strings 0x%x -> 0x%x\n",
2064 RELOC(dt_string_start
), RELOC(dt_string_end
));
2065 prom_printf("Device tree struct 0x%x -> 0x%x\n",
2066 RELOC(dt_struct_start
), RELOC(dt_struct_end
));
2070 #ifdef CONFIG_PPC_MAPLE
2071 /* PIBS Version 1.05.0000 04/26/2005 has an incorrect /ht/isa/ranges property.
2072 * The values are bad, and it doesn't even have the right number of cells. */
2073 static void __init
fixup_device_tree_maple(void)
2078 isa
= call_prom("finddevice", 1, 1, ADDR("/ht@0/isa@4"));
2079 if (!PHANDLE_VALID(isa
))
2082 if (prom_getprop(isa
, "ranges", isa_ranges
, sizeof(isa_ranges
))
2086 if (isa_ranges
[0] != 0x1 ||
2087 isa_ranges
[1] != 0xf4000000 ||
2088 isa_ranges
[2] != 0x00010000)
2091 prom_printf("fixing up bogus ISA range on Maple...\n");
2093 isa_ranges
[0] = 0x1;
2094 isa_ranges
[1] = 0x0;
2095 isa_ranges
[2] = 0x01002000; /* IO space; PCI device = 4 */
2096 isa_ranges
[3] = 0x0;
2097 isa_ranges
[4] = 0x0;
2098 isa_ranges
[5] = 0x00010000;
2099 prom_setprop(isa
, "/ht@0/isa@4", "ranges",
2100 isa_ranges
, sizeof(isa_ranges
));
2103 #define fixup_device_tree_maple()
2106 #if defined(CONFIG_PPC64) && defined(CONFIG_PPC_PMAC)
2107 static void __init
fixup_device_tree_pmac(void)
2109 phandle u3
, i2c
, mpic
;
2114 /* Some G5s have a missing interrupt definition, fix it up here */
2115 u3
= call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000"));
2116 if (!PHANDLE_VALID(u3
))
2118 i2c
= call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000"));
2119 if (!PHANDLE_VALID(i2c
))
2121 mpic
= call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000"));
2122 if (!PHANDLE_VALID(mpic
))
2125 /* check if proper rev of u3 */
2126 if (prom_getprop(u3
, "device-rev", &u3_rev
, sizeof(u3_rev
))
2129 if (u3_rev
< 0x35 || u3_rev
> 0x39)
2131 /* does it need fixup ? */
2132 if (prom_getproplen(i2c
, "interrupts") > 0)
2135 prom_printf("fixing up bogus interrupts for u3 i2c...\n");
2137 /* interrupt on this revision of u3 is number 0 and level */
2140 prom_setprop(i2c
, "/u3@0,f8000000/i2c@f8001000", "interrupts",
2141 &interrupts
, sizeof(interrupts
));
2143 prom_setprop(i2c
, "/u3@0,f8000000/i2c@f8001000", "interrupt-parent",
2144 &parent
, sizeof(parent
));
2147 #define fixup_device_tree_pmac()
2150 static void __init
fixup_device_tree(void)
2152 fixup_device_tree_maple();
2153 fixup_device_tree_pmac();
2156 static void __init
prom_find_boot_cpu(void)
2158 struct prom_t
*_prom
= &RELOC(prom
);
2164 if (prom_getprop(_prom
->chosen
, "cpu", &prom_cpu
, sizeof(prom_cpu
)) <= 0)
2167 cpu_pkg
= call_prom("instance-to-package", 1, 1, prom_cpu
);
2169 prom_getprop(cpu_pkg
, "reg", &getprop_rval
, sizeof(getprop_rval
));
2170 _prom
->cpu
= getprop_rval
;
2172 prom_debug("Booting CPU hw index = 0x%x\n", _prom
->cpu
);
2175 static void __init
prom_check_initrd(unsigned long r3
, unsigned long r4
)
2177 #ifdef CONFIG_BLK_DEV_INITRD
2178 struct prom_t
*_prom
= &RELOC(prom
);
2180 if (r3
&& r4
&& r4
!= 0xdeadbeef) {
2183 RELOC(prom_initrd_start
) = is_kernel_addr(r3
) ? __pa(r3
) : r3
;
2184 RELOC(prom_initrd_end
) = RELOC(prom_initrd_start
) + r4
;
2186 val
= RELOC(prom_initrd_start
);
2187 prom_setprop(_prom
->chosen
, "/chosen", "linux,initrd-start",
2189 val
= RELOC(prom_initrd_end
);
2190 prom_setprop(_prom
->chosen
, "/chosen", "linux,initrd-end",
2193 reserve_mem(RELOC(prom_initrd_start
),
2194 RELOC(prom_initrd_end
) - RELOC(prom_initrd_start
));
2196 prom_debug("initrd_start=0x%x\n", RELOC(prom_initrd_start
));
2197 prom_debug("initrd_end=0x%x\n", RELOC(prom_initrd_end
));
2199 #endif /* CONFIG_BLK_DEV_INITRD */
2203 * We enter here early on, when the Open Firmware prom is still
2204 * handling exceptions and the MMU hash table for us.
2207 unsigned long __init
prom_init(unsigned long r3
, unsigned long r4
,
2209 unsigned long r6
, unsigned long r7
)
2211 struct prom_t
*_prom
;
2213 unsigned long offset
= reloc_offset();
2219 _prom
= &RELOC(prom
);
2222 * First zero the BSS
2224 memset(&RELOC(__bss_start
), 0, __bss_stop
- __bss_start
);
2227 * Init interface to Open Firmware, get some node references,
2230 prom_init_client_services(pp
);
2233 * See if this OF is old enough that we need to do explicit maps
2234 * and other workarounds
2239 * Init prom stdout device
2244 * Get default machine type. At this point, we do not differentiate
2245 * between pSeries SMP and pSeries LPAR
2247 RELOC(of_platform
) = prom_find_machine_type();
2249 /* Bail if this is a kdump kernel. */
2250 if (PHYSICAL_START
> 0)
2251 prom_panic("Error: You can't boot a kdump kernel from OF!\n");
2254 * Check for an initrd
2256 prom_check_initrd(r3
, r4
);
2258 #ifdef CONFIG_PPC_PSERIES
2260 * On pSeries, inform the firmware about our capabilities
2262 if (RELOC(of_platform
) == PLATFORM_PSERIES
||
2263 RELOC(of_platform
) == PLATFORM_PSERIES_LPAR
)
2264 prom_send_capabilities();
2268 * Copy the CPU hold code
2270 if (RELOC(of_platform
) != PLATFORM_POWERMAC
)
2271 copy_and_flush(0, KERNELBASE
+ offset
, 0x100, 0);
2274 * Do early parsing of command line
2276 early_cmdline_parse();
2279 * Initialize memory management within prom_init
2284 if (RELOC(prom_crashk_base
))
2285 reserve_mem(RELOC(prom_crashk_base
), RELOC(prom_crashk_size
));
2288 * Determine which cpu is actually running right _now_
2290 prom_find_boot_cpu();
2293 * Initialize display devices
2295 prom_check_displays();
2299 * Initialize IOMMU (TCE tables) on pSeries. Do that before anything else
2300 * that uses the allocator, we need to make sure we get the top of memory
2301 * available for us here...
2303 if (RELOC(of_platform
) == PLATFORM_PSERIES
)
2304 prom_initialize_tce_table();
2308 * On non-powermacs, try to instantiate RTAS and puts all CPUs
2309 * in spin-loops. PowerMacs don't have a working RTAS and use
2310 * a different way to spin CPUs
2312 if (RELOC(of_platform
) != PLATFORM_POWERMAC
) {
2313 prom_instantiate_rtas();
2318 * Fill in some infos for use by the kernel later on
2320 if (RELOC(prom_memory_limit
))
2321 prom_setprop(_prom
->chosen
, "/chosen", "linux,memory-limit",
2322 &RELOC(prom_memory_limit
),
2323 sizeof(prom_memory_limit
));
2325 if (RELOC(ppc64_iommu_off
))
2326 prom_setprop(_prom
->chosen
, "/chosen", "linux,iommu-off",
2329 if (RELOC(iommu_force_on
))
2330 prom_setprop(_prom
->chosen
, "/chosen", "linux,iommu-force-on",
2333 if (RELOC(prom_tce_alloc_start
)) {
2334 prom_setprop(_prom
->chosen
, "/chosen", "linux,tce-alloc-start",
2335 &RELOC(prom_tce_alloc_start
),
2336 sizeof(prom_tce_alloc_start
));
2337 prom_setprop(_prom
->chosen
, "/chosen", "linux,tce-alloc-end",
2338 &RELOC(prom_tce_alloc_end
),
2339 sizeof(prom_tce_alloc_end
));
2344 if (RELOC(prom_crashk_base
)) {
2345 prom_setprop(_prom
->chosen
, "/chosen", "linux,crashkernel-base",
2346 PTRRELOC(&prom_crashk_base
),
2347 sizeof(RELOC(prom_crashk_base
)));
2348 prom_setprop(_prom
->chosen
, "/chosen", "linux,crashkernel-size",
2349 PTRRELOC(&prom_crashk_size
),
2350 sizeof(RELOC(prom_crashk_size
)));
2354 * Fixup any known bugs in the device-tree
2356 fixup_device_tree();
2359 * Now finally create the flattened device-tree
2361 prom_printf("copying OF device tree ...\n");
2362 flatten_device_tree();
2365 * in case stdin is USB and still active on IBM machines...
2366 * Unfortunately quiesce crashes on some powermacs if we have
2367 * closed stdin already (in particular the powerbook 101).
2369 if (RELOC(of_platform
) != PLATFORM_POWERMAC
)
2373 * Call OF "quiesce" method to shut down pending DMA's from
2376 prom_printf("Calling quiesce ...\n");
2377 call_prom("quiesce", 0, 0);
2380 * And finally, call the kernel passing it the flattened device
2381 * tree and NULL as r5, thus triggering the new entry point which
2382 * is common to us and kexec
2384 hdr
= RELOC(dt_header_start
);
2385 prom_printf("returning from prom_init\n");
2386 prom_debug("->dt_header_start=0x%x\n", hdr
);
2389 reloc_got2(-offset
);
2392 __start(hdr
, KERNELBASE
+ offset
, 0);