powerpc: Show utsname->machine in boot-up banner

[deliverable/linux.git] / arch / powerpc / kernel / setup_64.c

/*
 * 
 * Common boot and setup code.
 *
 * Copyright (C) 2001 PPC64 Team, IBM Corp
 *
 *      This program is free software; you can redistribute it and/or
 *      modify it under the terms of the GNU General Public License
 *      as published by the Free Software Foundation; either version
 *      2 of the License, or (at your option) any later version.
 */

#define DEBUG

#include <linux/export.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/initrd.h>
#include <linux/seq_file.h>
#include <linux/ioport.h>
#include <linux/console.h>
#include <linux/utsname.h>
#include <linux/tty.h>
#include <linux/root_dev.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/unistd.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/bootmem.h>
#include <linux/pci.h>
#include <linux/lockdep.h>
#include <linux/memblock.h>
#include <linux/hugetlb.h>
#include <linux/memory.h>
#include <linux/nmi.h>

#include <asm/io.h>
#include <asm/kdump.h>
#include <asm/prom.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/smp.h>
#include <asm/elf.h>
#include <asm/machdep.h>
#include <asm/paca.h>
#include <asm/time.h>
#include <asm/cputable.h>
#include <asm/sections.h>
#include <asm/btext.h>
#include <asm/nvram.h>
#include <asm/setup.h>
#include <asm/rtas.h>
#include <asm/iommu.h>
#include <asm/serial.h>
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/firmware.h>
#include <asm/xmon.h>
#include <asm/udbg.h>
#include <asm/kexec.h>
#include <asm/mmu_context.h>
#include <asm/code-patching.h>
#include <asm/kvm_ppc.h>
#include <asm/hugetlb.h>
#include <asm/epapr_hcalls.h>

#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif

int spinning_secondaries;
u64 ppc64_pft_size;

/* Pick defaults since we might want to patch instructions
 * before we've read this from the device tree.
 */
struct ppc64_caches ppc64_caches = {
        .dline_size = 0x40,
        .log_dline_size = 6,
        .iline_size = 0x40,
        .log_iline_size = 6
};
EXPORT_SYMBOL_GPL(ppc64_caches);

/*
 * These are used in binfmt_elf.c to put aux entries on the stack
 * for each elf executable being started.
 */
int dcache_bsize;
int icache_bsize;
int ucache_bsize;

#if defined(CONFIG_PPC_BOOK3E) && defined(CONFIG_SMP)
static void setup_tlb_core_data(void)
{
        int cpu;

        BUILD_BUG_ON(offsetof(struct tlb_core_data, lock) != 0);

        for_each_possible_cpu(cpu) {
                int first = cpu_first_thread_sibling(cpu);

                paca[cpu].tcd_ptr = &paca[first].tcd;

                /*
                 * If we have threads, we need either tlbsrx.
                 * or e6500 tablewalk mode, or else TLB handlers
                 * will be racy and could produce duplicate entries.
                 */
                if (smt_enabled_at_boot >= 2 &&
                    !mmu_has_feature(MMU_FTR_USE_TLBRSRV) &&
                    book3e_htw_mode != PPC_HTW_E6500) {
                        /* Should we panic instead? */
                        WARN_ONCE("%s: unsupported MMU configuration -- expect problems\n",
                                  __func__);
                }
        }
}
#else
static void setup_tlb_core_data(void)
{
}
#endif

#ifdef CONFIG_SMP

static char *smt_enabled_cmdline;

/* Look for ibm,smt-enabled OF option */
static void check_smt_enabled(void)
{
        struct device_node *dn;
        const char *smt_option;

        /* Default to enabling all threads */
        smt_enabled_at_boot = threads_per_core;

        /* Allow the command line to overrule the OF option */
        if (smt_enabled_cmdline) {
                if (!strcmp(smt_enabled_cmdline, "on"))
                        smt_enabled_at_boot = threads_per_core;
                else if (!strcmp(smt_enabled_cmdline, "off"))
                        smt_enabled_at_boot = 0;
                else {
                        int smt;
                        int rc;

                        rc = kstrtoint(smt_enabled_cmdline, 10, &smt);
                        if (!rc)
                                smt_enabled_at_boot =
                                        min(threads_per_core, smt);
                }
        } else {
                dn = of_find_node_by_path("/options");
                if (dn) {
                        smt_option = of_get_property(dn, "ibm,smt-enabled",
                                                     NULL);

                        if (smt_option) {
                                if (!strcmp(smt_option, "on"))
                                        smt_enabled_at_boot = threads_per_core;
                                else if (!strcmp(smt_option, "off"))
                                        smt_enabled_at_boot = 0;
                        }

                        of_node_put(dn);
                }
        }
}

/* Look for smt-enabled= cmdline option */
static int __init early_smt_enabled(char *p)
{
        smt_enabled_cmdline = p;
        return 0;
}
early_param("smt-enabled", early_smt_enabled);

#else
#define check_smt_enabled()
#endif /* CONFIG_SMP */

/** Fix up paca fields required for the boot cpu */
static void fixup_boot_paca(void)
{
        /* The boot cpu is started */
        get_paca()->cpu_start = 1;
        /* Allow percpu accesses to work until we setup percpu data */
        get_paca()->data_offset = 0;
}

static void cpu_ready_for_interrupts(void)
{
        /* Set IR and DR in PACA MSR */
        get_paca()->kernel_msr = MSR_KERNEL;

        /*
         * Enable AIL if supported, and we are in hypervisor mode. If we are
         * not in hypervisor mode, we enable relocation-on interrupts later
         * in pSeries_setup_arch() using the H_SET_MODE hcall.
         */
        if (cpu_has_feature(CPU_FTR_HVMODE) &&
            cpu_has_feature(CPU_FTR_ARCH_207S)) {
                unsigned long lpcr = mfspr(SPRN_LPCR);
                mtspr(SPRN_LPCR, lpcr | LPCR_AIL_3);
        }
}

/*
 * Early initialization entry point. This is called by head.S
 * with MMU translation disabled. We rely on the "feature" of
 * the CPU that ignores the top 2 bits of the address in real
 * mode so we can access kernel globals normally provided we
 * only toy with things in the RMO region. From here, we do
 * some early parsing of the device-tree to setup out MEMBLOCK
 * data structures, and allocate & initialize the hash table
 * and segment tables so we can start running with translation
 * enabled.
 *
 * It is this function which will call the probe() callback of
 * the various platform types and copy the matching one to the
 * global ppc_md structure. Your platform can eventually do
 * some very early initializations from the probe() routine, but
 * this is not recommended, be very careful as, for example, the
 * device-tree is not accessible via normal means at this point.
 */

void __init early_setup(unsigned long dt_ptr)
{
        static __initdata struct paca_struct boot_paca;

        /* -------- printk is _NOT_ safe to use here ! ------- */

        /* Identify CPU type */
        identify_cpu(0, mfspr(SPRN_PVR));

        /* Assume we're on cpu 0 for now. Don't write to the paca yet! */
        initialise_paca(&boot_paca, 0);
        setup_paca(&boot_paca);
        fixup_boot_paca();

        /* Initialize lockdep early or else spinlocks will blow */
        lockdep_init();

        /* -------- printk is now safe to use ------- */

        /* Enable early debugging if any specified (see udbg.h) */
        udbg_early_init();

        DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr);

        /*
         * Do early initialization using the flattened device
         * tree, such as retrieving the physical memory map or
         * calculating/retrieving the hash table size.
         */
        early_init_devtree(__va(dt_ptr));

        epapr_paravirt_early_init();

        /* Now we know the logical id of our boot cpu, setup the paca. */
        setup_paca(&paca[boot_cpuid]);
        fixup_boot_paca();

        /* Probe the machine type */
        probe_machine();

        setup_kdump_trampoline();

        DBG("Found, Initializing memory management...\n");

        /* Initialize the hash table or TLB handling */
        early_init_mmu();

        /*
         * At this point, we can let interrupts switch to virtual mode
         * (the MMU has been setup), so adjust the MSR in the PACA to
         * have IR and DR set and enable AIL if it exists
         */
        cpu_ready_for_interrupts();

        /* Reserve large chunks of memory for use by CMA for KVM */
        kvm_cma_reserve();

        /*
         * Reserve any gigantic pages requested on the command line.
         * memblock needs to have been initialized by the time this is
         * called since this will reserve memory.
         */
        reserve_hugetlb_gpages();

        DBG(" <- early_setup()\n");

#ifdef CONFIG_PPC_EARLY_DEBUG_BOOTX
        /*
         * This needs to be done *last* (after the above DBG() even)
         *
         * Right after we return from this function, we turn on the MMU
         * which means the real-mode access trick that btext does will
         * no longer work, it needs to switch to using a real MMU
         * mapping. This call will ensure that it does
         */
        btext_map();
#endif /* CONFIG_PPC_EARLY_DEBUG_BOOTX */
}

#ifdef CONFIG_SMP
void early_setup_secondary(void)
{
        /* Mark interrupts enabled in PACA */
        get_paca()->soft_enabled = 0;

        /* Initialize the hash table or TLB handling */
        early_init_mmu_secondary();

        /*
         * At this point, we can let interrupts switch to virtual mode
         * (the MMU has been setup), so adjust the MSR in the PACA to
         * have IR and DR set.
         */
        cpu_ready_for_interrupts();
}

#endif /* CONFIG_SMP */

#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
void smp_release_cpus(void)
{
        unsigned long *ptr;
        int i;

        DBG(" -> smp_release_cpus()\n");

        /* All secondary cpus are spinning on a common spinloop, release them
         * all now so they can start to spin on their individual paca
         * spinloops. For non SMP kernels, the secondary cpus never get out
         * of the common spinloop.
         */

        ptr  = (unsigned long *)((unsigned long)&__secondary_hold_spinloop
                        - PHYSICAL_START);
        *ptr = ppc_function_entry(generic_secondary_smp_init);

        /* And wait a bit for them to catch up */
        for (i = 0; i < 100000; i++) {
                mb();
                HMT_low();
                if (spinning_secondaries == 0)
                        break;
                udelay(1);
        }
        DBG("spinning_secondaries = %d\n", spinning_secondaries);

        DBG(" <- smp_release_cpus()\n");
}
#endif /* CONFIG_SMP || CONFIG_KEXEC */

/*
 * Initialize some remaining members of the ppc64_caches and systemcfg
 * structures
 * (at least until we get rid of them completely). This is mostly some
 * cache informations about the CPU that will be used by cache flush
 * routines and/or provided to userland
 */
static void __init initialize_cache_info(void)
{
        struct device_node *np;
        unsigned long num_cpus = 0;

        DBG(" -> initialize_cache_info()\n");

        for_each_node_by_type(np, "cpu") {
                num_cpus += 1;

                /*
                 * We're assuming *all* of the CPUs have the same
                 * d-cache and i-cache sizes... -Peter
                 */
                if (num_cpus == 1) {
                        const __be32 *sizep, *lsizep;
                        u32 size, lsize;

                        size = 0;
                        lsize = cur_cpu_spec->dcache_bsize;
                        sizep = of_get_property(np, "d-cache-size", NULL);
                        if (sizep != NULL)
                                size = be32_to_cpu(*sizep);
                        lsizep = of_get_property(np, "d-cache-block-size",
                                                 NULL);
                        /* fallback if block size missing */
                        if (lsizep == NULL)
                                lsizep = of_get_property(np,
                                                         "d-cache-line-size",
                                                         NULL);
                        if (lsizep != NULL)
                                lsize = be32_to_cpu(*lsizep);
                        if (sizep == NULL || lsizep == NULL)
                                DBG("Argh, can't find dcache properties ! "
                                    "sizep: %p, lsizep: %p\n", sizep, lsizep);

                        ppc64_caches.dsize = size;
                        ppc64_caches.dline_size = lsize;
                        ppc64_caches.log_dline_size = __ilog2(lsize);
                        ppc64_caches.dlines_per_page = PAGE_SIZE / lsize;

                        size = 0;
                        lsize = cur_cpu_spec->icache_bsize;
                        sizep = of_get_property(np, "i-cache-size", NULL);
                        if (sizep != NULL)
                                size = be32_to_cpu(*sizep);
                        lsizep = of_get_property(np, "i-cache-block-size",
                                                 NULL);
                        if (lsizep == NULL)
                                lsizep = of_get_property(np,
                                                         "i-cache-line-size",
                                                         NULL);
                        if (lsizep != NULL)
                                lsize = be32_to_cpu(*lsizep);
                        if (sizep == NULL || lsizep == NULL)
                                DBG("Argh, can't find icache properties ! "
                                    "sizep: %p, lsizep: %p\n", sizep, lsizep);

                        ppc64_caches.isize = size;
                        ppc64_caches.iline_size = lsize;
                        ppc64_caches.log_iline_size = __ilog2(lsize);
                        ppc64_caches.ilines_per_page = PAGE_SIZE / lsize;
                }
        }

        DBG(" <- initialize_cache_info()\n");
}


/*
 * Do some initial setup of the system.  The parameters are those which 
 * were passed in from the bootloader.
 */
void __init setup_system(void)
{
        DBG(" -> setup_system()\n");

        /* Apply the CPUs-specific and firmware specific fixups to kernel
         * text (nop out sections not relevant to this CPU or this firmware)
         */
        do_feature_fixups(cur_cpu_spec->cpu_features,
                          &__start___ftr_fixup, &__stop___ftr_fixup);
        do_feature_fixups(cur_cpu_spec->mmu_features,
                          &__start___mmu_ftr_fixup, &__stop___mmu_ftr_fixup);
        do_feature_fixups(powerpc_firmware_features,
                          &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);
        do_lwsync_fixups(cur_cpu_spec->cpu_features,
                         &__start___lwsync_fixup, &__stop___lwsync_fixup);
        do_final_fixups();

        /*
         * Unflatten the device-tree passed by prom_init or kexec
         */
        unflatten_device_tree();

        /*
         * Fill the ppc64_caches & systemcfg structures with informations
         * retrieved from the device-tree.
         */
        initialize_cache_info();

#ifdef CONFIG_PPC_RTAS
        /*
         * Initialize RTAS if available
         */
        rtas_initialize();
#endif /* CONFIG_PPC_RTAS */

        /*
         * Check if we have an initrd provided via the device-tree
         */
        check_for_initrd();

        /*
         * Do some platform specific early initializations, that includes
         * setting up the hash table pointers. It also sets up some interrupt-mapping
         * related options that will be used by finish_device_tree()
         */
        if (ppc_md.init_early)
                ppc_md.init_early();

        /*
         * We can discover serial ports now since the above did setup the
         * hash table management for us, thus ioremap works. We do that early
         * so that further code can be debugged
         */
        find_legacy_serial_ports();

        /*
         * Register early console
         */
        register_early_udbg_console();

        /*
         * Initialize xmon
         */
        xmon_setup();

        smp_setup_cpu_maps();
        check_smt_enabled();
        setup_tlb_core_data();

        /*
         * Freescale Book3e parts spin in a loop provided by firmware,
         * so smp_release_cpus() does nothing for them
         */
#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_FSL_BOOK3E)
        /* Release secondary cpus out of their spinloops at 0x60 now that
         * we can map physical -> logical CPU ids
         */
        smp_release_cpus();
#endif

        pr_info("Starting Linux %s %s\n", init_utsname()->machine,
                 init_utsname()->version);

        pr_info("-----------------------------------------------------\n");
        pr_info("ppc64_pft_size    = 0x%llx\n", ppc64_pft_size);
        pr_info("phys_mem_size     = 0x%llx\n", memblock_phys_mem_size());

        if (ppc64_caches.dline_size != 0x80)
                pr_info("dcache_line_size  = 0x%x\n", ppc64_caches.dline_size);
        if (ppc64_caches.iline_size != 0x80)
                pr_info("icache_line_size  = 0x%x\n", ppc64_caches.iline_size);

        pr_info("cpu_features      = 0x%016lx\n", cur_cpu_spec->cpu_features);
        pr_info("  possible        = 0x%016lx\n", CPU_FTRS_POSSIBLE);
        pr_info("  always          = 0x%016lx\n", CPU_FTRS_ALWAYS);
        pr_info("cpu_user_features = 0x%08x 0x%08x\n", cur_cpu_spec->cpu_user_features,
                cur_cpu_spec->cpu_user_features2);
        pr_info("mmu_features      = 0x%08x\n", cur_cpu_spec->mmu_features);
        pr_info("firmware_features = 0x%016lx\n", powerpc_firmware_features);

#ifdef CONFIG_PPC_STD_MMU_64
        if (htab_address)
                pr_info("htab_address      = 0x%p\n", htab_address);

        pr_info("htab_hash_mask    = 0x%lx\n", htab_hash_mask);
#endif

        if (PHYSICAL_START > 0)
                pr_info("physical_start    = 0x%llx\n",
                       (unsigned long long)PHYSICAL_START);
        pr_info("-----------------------------------------------------\n");

        DBG(" <- setup_system()\n");
}

/* This returns the limit below which memory accesses to the linear
 * mapping are guarnateed not to cause a TLB or SLB miss. This is
 * used to allocate interrupt or emergency stacks for which our
 * exception entry path doesn't deal with being interrupted.
 */
static u64 safe_stack_limit(void)
{
#ifdef CONFIG_PPC_BOOK3E
        /* Freescale BookE bolts the entire linear mapping */
        if (mmu_has_feature(MMU_FTR_TYPE_FSL_E))
                return linear_map_top;
        /* Other BookE, we assume the first GB is bolted */
        return 1ul << 30;
#else
        /* BookS, the first segment is bolted */
        if (mmu_has_feature(MMU_FTR_1T_SEGMENT))
                return 1UL << SID_SHIFT_1T;
        return 1UL << SID_SHIFT;
#endif
}

static void __init irqstack_early_init(void)
{
        u64 limit = safe_stack_limit();
        unsigned int i;

        /*
         * Interrupt stacks must be in the first segment since we
         * cannot afford to take SLB misses on them.
         */
        for_each_possible_cpu(i) {
                softirq_ctx[i] = (struct thread_info *)
                        __va(memblock_alloc_base(THREAD_SIZE,
                                            THREAD_SIZE, limit));
                hardirq_ctx[i] = (struct thread_info *)
                        __va(memblock_alloc_base(THREAD_SIZE,
                                            THREAD_SIZE, limit));
        }
}

#ifdef CONFIG_PPC_BOOK3E
static void __init exc_lvl_early_init(void)
{
        unsigned int i;
        unsigned long sp;

        for_each_possible_cpu(i) {
                sp = memblock_alloc(THREAD_SIZE, THREAD_SIZE);
                critirq_ctx[i] = (struct thread_info *)__va(sp);
                paca[i].crit_kstack = __va(sp + THREAD_SIZE);

                sp = memblock_alloc(THREAD_SIZE, THREAD_SIZE);
                dbgirq_ctx[i] = (struct thread_info *)__va(sp);
                paca[i].dbg_kstack = __va(sp + THREAD_SIZE);

                sp = memblock_alloc(THREAD_SIZE, THREAD_SIZE);
                mcheckirq_ctx[i] = (struct thread_info *)__va(sp);
                paca[i].mc_kstack = __va(sp + THREAD_SIZE);
        }

        if (cpu_has_feature(CPU_FTR_DEBUG_LVL_EXC))
                patch_exception(0x040, exc_debug_debug_book3e);
}
#else
#define exc_lvl_early_init()
#endif

/*
 * Stack space used when we detect a bad kernel stack pointer, and
 * early in SMP boots before relocation is enabled. Exclusive emergency
 * stack for machine checks.
 */
static void __init emergency_stack_init(void)
{
        u64 limit;
        unsigned int i;

        /*
         * Emergency stacks must be under 256MB, we cannot afford to take
         * SLB misses on them. The ABI also requires them to be 128-byte
         * aligned.
         *
         * Since we use these as temporary stacks during secondary CPU
         * bringup, we need to get at them in real mode. This means they
         * must also be within the RMO region.
         */
        limit = min(safe_stack_limit(), ppc64_rma_size);

        for_each_possible_cpu(i) {
                unsigned long sp;
                sp  = memblock_alloc_base(THREAD_SIZE, THREAD_SIZE, limit);
                sp += THREAD_SIZE;
                paca[i].emergency_sp = __va(sp);

#ifdef CONFIG_PPC_BOOK3S_64
                /* emergency stack for machine check exception handling. */
                sp  = memblock_alloc_base(THREAD_SIZE, THREAD_SIZE, limit);
                sp += THREAD_SIZE;
                paca[i].mc_emergency_sp = __va(sp);
#endif
        }
}

/*
 * Called into from start_kernel this initializes memblock, which is used
 * to manage page allocation until mem_init is called.
 */
void __init setup_arch(char **cmdline_p)
{
        *cmdline_p = boot_command_line;

        /*
         * Set cache line size based on type of cpu as a default.
         * Systems with OF can look in the properties on the cpu node(s)
         * for a possibly more accurate value.
         */
        dcache_bsize = ppc64_caches.dline_size;
        icache_bsize = ppc64_caches.iline_size;

        if (ppc_md.panic)
                setup_panic();

        init_mm.start_code = (unsigned long)_stext;
        init_mm.end_code = (unsigned long) _etext;
        init_mm.end_data = (unsigned long) _edata;
        init_mm.brk = klimit;
#ifdef CONFIG_PPC_64K_PAGES
        init_mm.context.pte_frag = NULL;
#endif
        irqstack_early_init();
        exc_lvl_early_init();
        emergency_stack_init();

        initmem_init();

#ifdef CONFIG_DUMMY_CONSOLE
        conswitchp = &dummy_con;
#endif

        if (ppc_md.setup_arch)
                ppc_md.setup_arch();

        paging_init();

        /* Initialize the MMU context management stuff */
        mmu_context_init();

        /* Interrupt code needs to be 64K-aligned */
        if ((unsigned long)_stext & 0xffff)
                panic("Kernelbase not 64K-aligned (0x%lx)!\n",
                      (unsigned long)_stext);
}

#ifdef CONFIG_SMP
#define PCPU_DYN_SIZE           ()

static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align)
{
        return __alloc_bootmem_node(NODE_DATA(cpu_to_node(cpu)), size, align,
                                    __pa(MAX_DMA_ADDRESS));
}

static void __init pcpu_fc_free(void *ptr, size_t size)
{
        free_bootmem(__pa(ptr), size);
}

static int pcpu_cpu_distance(unsigned int from, unsigned int to)
{
        if (cpu_to_node(from) == cpu_to_node(to))
                return LOCAL_DISTANCE;
        else
                return REMOTE_DISTANCE;
}

unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
EXPORT_SYMBOL(__per_cpu_offset);

void __init setup_per_cpu_areas(void)
{
        const size_t dyn_size = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
        size_t atom_size;
        unsigned long delta;
        unsigned int cpu;
        int rc;

        /*
         * Linear mapping is one of 4K, 1M and 16M.  For 4K, no need
         * to group units.  For larger mappings, use 1M atom which
         * should be large enough to contain a number of units.
         */
        if (mmu_linear_psize == MMU_PAGE_4K)
                atom_size = PAGE_SIZE;
        else
                atom_size = 1 << 20;

        rc = pcpu_embed_first_chunk(0, dyn_size, atom_size, pcpu_cpu_distance,
                                    pcpu_fc_alloc, pcpu_fc_free);
        if (rc < 0)
                panic("cannot initialize percpu area (err=%d)", rc);

        delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
        for_each_possible_cpu(cpu) {
                __per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu];
                paca[cpu].data_offset = __per_cpu_offset[cpu];
        }
}
#endif

#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
unsigned long memory_block_size_bytes(void)
{
        if (ppc_md.memory_block_size)
                return ppc_md.memory_block_size();

        return MIN_MEMORY_BLOCK_SIZE;
}
#endif

#if defined(CONFIG_PPC_INDIRECT_PIO) || defined(CONFIG_PPC_INDIRECT_MMIO)
struct ppc_pci_io ppc_pci_io;
EXPORT_SYMBOL(ppc_pci_io);
#endif

#ifdef CONFIG_HARDLOCKUP_DETECTOR
u64 hw_nmi_get_sample_period(int watchdog_thresh)
{
        return ppc_proc_freq * watchdog_thresh;
}

/*
 * The hardlockup detector breaks PMU event based branches and is likely
 * to get false positives in KVM guests, so disable it by default.
 */
static int __init disable_hardlockup_detector(void)
{
        hardlockup_detector_disable();

        return 0;
}
early_initcall(disable_hardlockup_detector);
#endif