[PATCH] mm: powerpc init_mm without ptlock
[deliverable/linux.git] / arch / powerpc / mm / 4xx_mmu.c
1 /*
2 * This file contains the routines for initializing the MMU
3 * on the 4xx series of chips.
4 * -- paulus
5 *
6 * Derived from arch/ppc/mm/init.c:
7 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
8 *
9 * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
10 * and Cort Dougan (PReP) (cort@cs.nmt.edu)
11 * Copyright (C) 1996 Paul Mackerras
12 * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
13 *
14 * Derived from "arch/i386/mm/init.c"
15 * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
16 *
17 * This program is free software; you can redistribute it and/or
18 * modify it under the terms of the GNU General Public License
19 * as published by the Free Software Foundation; either version
20 * 2 of the License, or (at your option) any later version.
21 *
22 */
23
24 #include <linux/config.h>
25 #include <linux/signal.h>
26 #include <linux/sched.h>
27 #include <linux/kernel.h>
28 #include <linux/errno.h>
29 #include <linux/string.h>
30 #include <linux/types.h>
31 #include <linux/ptrace.h>
32 #include <linux/mman.h>
33 #include <linux/mm.h>
34 #include <linux/swap.h>
35 #include <linux/stddef.h>
36 #include <linux/vmalloc.h>
37 #include <linux/init.h>
38 #include <linux/delay.h>
39 #include <linux/highmem.h>
40
41 #include <asm/pgalloc.h>
42 #include <asm/prom.h>
43 #include <asm/io.h>
44 #include <asm/mmu_context.h>
45 #include <asm/pgtable.h>
46 #include <asm/mmu.h>
47 #include <asm/uaccess.h>
48 #include <asm/smp.h>
49 #include <asm/bootx.h>
50 #include <asm/machdep.h>
51 #include <asm/setup.h>
52 #include "mmu_decl.h"
53
54 extern int __map_without_ltlbs;
55 /*
56 * MMU_init_hw does the chip-specific initialization of the MMU hardware.
57 */
58 void __init MMU_init_hw(void)
59 {
60 /*
61 * The Zone Protection Register (ZPR) defines how protection will
62 * be applied to every page which is a member of a given zone. At
63 * present, we utilize only two of the 4xx's zones.
64 * The zone index bits (of ZSEL) in the PTE are used for software
65 * indicators, except the LSB. For user access, zone 1 is used,
66 * for kernel access, zone 0 is used. We set all but zone 1
67 * to zero, allowing only kernel access as indicated in the PTE.
68 * For zone 1, we set a 01 binary (a value of 10 will not work)
69 * to allow user access as indicated in the PTE. This also allows
70 * kernel access as indicated in the PTE.
71 */
72
73 mtspr(SPRN_ZPR, 0x10000000);
74
75 flush_instruction_cache();
76
77 /*
78 * Set up the real-mode cache parameters for the exception vector
79 * handlers (which are run in real-mode).
80 */
81
82 mtspr(SPRN_DCWR, 0x00000000); /* All caching is write-back */
83
84 /*
85 * Cache instruction and data space where the exception
86 * vectors and the kernel live in real-mode.
87 */
88
89 mtspr(SPRN_DCCR, 0xF0000000); /* 512 MB of data space at 0x0. */
90 mtspr(SPRN_ICCR, 0xF0000000); /* 512 MB of instr. space at 0x0. */
91 }
92
93 #define LARGE_PAGE_SIZE_16M (1<<24)
94 #define LARGE_PAGE_SIZE_4M (1<<22)
95
96 unsigned long __init mmu_mapin_ram(void)
97 {
98 unsigned long v, s;
99 phys_addr_t p;
100
101 v = KERNELBASE;
102 p = PPC_MEMSTART;
103 s = 0;
104
105 if (__map_without_ltlbs) {
106 return s;
107 }
108
109 while (s <= (total_lowmem - LARGE_PAGE_SIZE_16M)) {
110 pmd_t *pmdp;
111 unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
112
113 pmdp = pmd_offset(pgd_offset_k(v), v);
114 pmd_val(*pmdp++) = val;
115 pmd_val(*pmdp++) = val;
116 pmd_val(*pmdp++) = val;
117 pmd_val(*pmdp++) = val;
118
119 v += LARGE_PAGE_SIZE_16M;
120 p += LARGE_PAGE_SIZE_16M;
121 s += LARGE_PAGE_SIZE_16M;
122 }
123
124 while (s <= (total_lowmem - LARGE_PAGE_SIZE_4M)) {
125 pmd_t *pmdp;
126 unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
127
128 pmdp = pmd_offset(pgd_offset_k(v), v);
129 pmd_val(*pmdp) = val;
130
131 v += LARGE_PAGE_SIZE_4M;
132 p += LARGE_PAGE_SIZE_4M;
133 s += LARGE_PAGE_SIZE_4M;
134 }
135
136 return s;
137 }
This page took 0.078995 seconds and 5 git commands to generate.