arch/powerpc/mm/init_32.c

   1 /*
   2  *  PowerPC version
   3  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
   4  *
   5  *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
   6  *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
   7  *    Copyright (C) 1996 Paul Mackerras
   8  *  PPC44x/36-bit changes by Matt Porter (mporter@mvista.com)
   9  *
  10  *  Derived from "arch/i386/mm/init.c"
  11  *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
  12  *
  13  *  This program is free software; you can redistribute it and/or
  14  *  modify it under the terms of the GNU General Public License
  15  *  as published by the Free Software Foundation; either version
  16  *  2 of the License, or (at your option) any later version.
  17  *
  18  */
  19
  20 #include <linux/module.h>
  21 #include <linux/sched.h>
  22 #include <linux/kernel.h>
  23 #include <linux/errno.h>
  24 #include <linux/string.h>
  25 #include <linux/types.h>
  26 #include <linux/mm.h>
  27 #include <linux/stddef.h>
  28 #include <linux/init.h>
  29 #include <linux/bootmem.h>
  30 #include <linux/highmem.h>
  31 #include <linux/initrd.h>
  32 #include <linux/pagemap.h>
  33 #include <linux/memblock.h>
  34 #include <linux/gfp.h>
  35 #include <linux/slab.h>
  36 #include <linux/hugetlb.h>
  37
  38 #include <asm/pgalloc.h>
  39 #include <asm/prom.h>
  40 #include <asm/io.h>
  41 #include <asm/pgtable.h>
  42 #include <asm/mmu.h>
  43 #include <asm/smp.h>
  44 #include <asm/machdep.h>
  45 #include <asm/btext.h>
  46 #include <asm/tlb.h>
  47 #include <asm/sections.h>
  48 #include <asm/system.h>
  49 #include <asm/hugetlb.h>
  50
  51 #include "mmu_decl.h"
  52
  53 #if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
  54 /* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */
  55 #if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET))
  56 #error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL"
  57 #endif
  58 #endif
  59 #define MAX_LOW_MEM     CONFIG_LOWMEM_SIZE
  60
  61 phys_addr_t total_memory;
  62 phys_addr_t total_lowmem;
  63
  64 phys_addr_t memstart_addr = (phys_addr_t)~0ull;
  65 EXPORT_SYMBOL(memstart_addr);
  66 phys_addr_t kernstart_addr;
  67 EXPORT_SYMBOL(kernstart_addr);
  68 phys_addr_t lowmem_end_addr;
  69
  70 int boot_mapsize;
  71 #ifdef CONFIG_PPC_PMAC
  72 unsigned long agp_special_page;
  73 EXPORT_SYMBOL(agp_special_page);
  74 #endif
  75
  76 void MMU_init(void);
  77
  78 /* XXX should be in current.h  -- paulus */
  79 extern struct task_struct *current_set[NR_CPUS];
  80
  81 /*
  82  * this tells the system to map all of ram with the segregs
  83  * (i.e. page tables) instead of the bats.
  84  * -- Cort
  85  */
  86 int __map_without_bats;
  87 int __map_without_ltlbs;
  88
  89 /*
  90  * This tells the system to allow ioremapping memory marked as reserved.
  91  */
  92 int __allow_ioremap_reserved;
  93
  94 /* max amount of low RAM to map in */
  95 unsigned long __max_low_memory = MAX_LOW_MEM;
  96
  97 /*
  98  * Check for command-line options that affect what MMU_init will do.
  99  */
 100 void MMU_setup(void)
 101 {
 102         /* Check for nobats option (used in mapin_ram). */
 103         if (strstr(cmd_line, "nobats")) {
 104                 __map_without_bats = 1;
 105         }
 106
 107         if (strstr(cmd_line, "noltlbs")) {
 108                 __map_without_ltlbs = 1;
 109         }
 110 #ifdef CONFIG_DEBUG_PAGEALLOC
 111         __map_without_bats = 1;
 112         __map_without_ltlbs = 1;
 113 #endif
 114 }
 115
 116 /*
 117  * MMU_init sets up the basic memory mappings for the kernel,
 118  * including both RAM and possibly some I/O regions,
 119  * and sets up the page tables and the MMU hardware ready to go.
 120  */
 121 void __init MMU_init(void)
 122 {
 123         if (ppc_md.progress)
 124                 ppc_md.progress("MMU:enter", 0x111);
 125
 126         /* parse args from command line */
 127         MMU_setup();
 128
 129         /*
 130          * Reserve gigantic pages for hugetlb.  This MUST occur before
 131          * lowmem_end_addr is initialized below.
 132          */
 133         reserve_hugetlb_gpages();
 134
 135         if (memblock.memory.cnt > 1) {
 136 #ifndef CONFIG_WII
 137                 memblock.memory.cnt = 1;
 138                 memblock_analyze();
 139                 printk(KERN_WARNING "Only using first contiguous memory region");
 140 #else
 141                 wii_memory_fixups();
 142 #endif
 143         }
 144
 145         total_lowmem = total_memory = memblock_end_of_DRAM() - memstart_addr;
 146         lowmem_end_addr = memstart_addr + total_lowmem;
 147
 148 #ifdef CONFIG_FSL_BOOKE
 149         /* Freescale Book-E parts expect lowmem to be mapped by fixed TLB
 150          * entries, so we need to adjust lowmem to match the amount we can map
 151          * in the fixed entries */
 152         adjust_total_lowmem();
 153 #endif /* CONFIG_FSL_BOOKE */
 154
 155         if (total_lowmem > __max_low_memory) {
 156                 total_lowmem = __max_low_memory;
 157                 lowmem_end_addr = memstart_addr + total_lowmem;
 158 #ifndef CONFIG_HIGHMEM
 159                 total_memory = total_lowmem;
 160                 memblock_enforce_memory_limit(total_lowmem);
 161                 memblock_analyze();
 162 #endif /* CONFIG_HIGHMEM */
 163         }
 164
 165         /* Initialize the MMU hardware */
 166         if (ppc_md.progress)
 167                 ppc_md.progress("MMU:hw init", 0x300);
 168         MMU_init_hw();
 169
 170         /* Map in all of RAM starting at KERNELBASE */
 171         if (ppc_md.progress)
 172                 ppc_md.progress("MMU:mapin", 0x301);
 173         mapin_ram();
 174
 175         /* Initialize early top-down ioremap allocator */
 176         ioremap_bot = IOREMAP_TOP;
 177
 178         /* Map in I/O resources */
 179         if (ppc_md.progress)
 180                 ppc_md.progress("MMU:setio", 0x302);
 181
 182         if (ppc_md.progress)
 183                 ppc_md.progress("MMU:exit", 0x211);
 184
 185         /* From now on, btext is no longer BAT mapped if it was at all */
 186 #ifdef CONFIG_BOOTX_TEXT
 187         btext_unmap();
 188 #endif
 189
 190         /* Shortly after that, the entire linear mapping will be available */
 191         memblock_set_current_limit(lowmem_end_addr);
 192 }
 193
 194 /* This is only called until mem_init is done. */
 195 void __init *early_get_page(void)
 196 {
 197         if (init_bootmem_done)
 198                 return alloc_bootmem_pages(PAGE_SIZE);
 199         else
 200                 return __va(memblock_alloc(PAGE_SIZE, PAGE_SIZE));
 201 }
 202
 203 #ifdef CONFIG_8xx /* No 8xx specific .c file to put that in ... */
 204 void setup_initial_memory_limit(phys_addr_t first_memblock_base,
 205                                 phys_addr_t first_memblock_size)
 206 {
 207         /* We don't currently support the first MEMBLOCK not mapping 0
 208          * physical on those processors
 209          */
 210         BUG_ON(first_memblock_base != 0);
 211
 212         /* 8xx can only access 8MB at the moment */
 213         memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000));
 214 }
 215 #endif /* CONFIG_8xx */