arch/powerpc/mm/slb_low.S

   1 /*
   2  * Low-level SLB routines
   3  *
   4  * Copyright (C) 2004 David Gibson <dwg@au.ibm.com>, IBM
   5  *
   6  * Based on earlier C version:
   7  * Dave Engebretsen and Mike Corrigan {engebret|mikejc}@us.ibm.com
   8  *    Copyright (c) 2001 Dave Engebretsen
   9  * Copyright (C) 2002 Anton Blanchard <anton@au.ibm.com>, IBM
  10  *
  11  *  This program is free software; you can redistribute it and/or
  12  *  modify it under the terms of the GNU General Public License
  13  *  as published by the Free Software Foundation; either version
  14  *  2 of the License, or (at your option) any later version.
  15  */
  16
  17 #include <asm/processor.h>
  18 #include <asm/ppc_asm.h>
  19 #include <asm/asm-offsets.h>
  20 #include <asm/cputable.h>
  21 #include <asm/page.h>
  22 #include <asm/mmu.h>
  23 #include <asm/pgtable.h>
  24 #include <asm/firmware.h>
  25
  26 /* void slb_allocate_realmode(unsigned long ea);
  27  *
  28  * Create an SLB entry for the given EA (user or kernel).
  29  *      r3 = faulting address, r13 = PACA
  30  *      r9, r10, r11 are clobbered by this function
  31  * No other registers are examined or changed.
  32  */
  33 _GLOBAL(slb_allocate_realmode)
  34         /*
  35          * check for bad kernel/user address
  36          * (ea & ~REGION_MASK) >= PGTABLE_RANGE
  37          */
  38         rldicr. r9,r3,4,(63 - PGTABLE_EADDR_SIZE - 4)
  39         bne-    8f
  40
  41         srdi    r9,r3,60                /* get region */
  42         srdi    r10,r3,SID_SHIFT        /* get esid */
  43         cmpldi  cr7,r9,0xc              /* cmp PAGE_OFFSET for later use */
  44
  45         /* r3 = address, r10 = esid, cr7 = <> PAGE_OFFSET */
  46         blt     cr7,0f                  /* user or kernel? */
  47
  48         /* kernel address: proto-VSID = ESID */
  49         /* WARNING - MAGIC: we don't use the VSID 0xfffffffff, but
  50          * this code will generate the protoVSID 0xfffffffff for the
  51          * top segment.  That's ok, the scramble below will translate
  52          * it to VSID 0, which is reserved as a bad VSID - one which
  53          * will never have any pages in it.  */
  54
  55         /* Check if hitting the linear mapping or some other kernel space
  56         */
  57         bne     cr7,1f
  58
  59         /* Linear mapping encoding bits, the "li" instruction below will
  60          * be patched by the kernel at boot
  61          */
  62 .globl slb_miss_kernel_load_linear
  63 slb_miss_kernel_load_linear:
  64         li      r11,0
  65         /*
  66          * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
  67          * r9 = region id.
  68          */
  69         addis   r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@ha
  70         addi    r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@l
  71
  72
  73 BEGIN_FTR_SECTION
  74         b       slb_finish_load
  75 END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
  76         b       slb_finish_load_1T
  77
  78 1:
  79 #ifdef CONFIG_SPARSEMEM_VMEMMAP
  80         /* Check virtual memmap region. To be patches at kernel boot */
  81         cmpldi  cr0,r9,0xf
  82         bne     1f
  83 .globl slb_miss_kernel_load_vmemmap
  84 slb_miss_kernel_load_vmemmap:
  85         li      r11,0
  86         b       6f
  87 1:
  88 #endif /* CONFIG_SPARSEMEM_VMEMMAP */
  89
  90         /* vmalloc mapping gets the encoding from the PACA as the mapping
  91          * can be demoted from 64K -> 4K dynamically on some machines
  92          */
  93         clrldi  r11,r10,48
  94         cmpldi  r11,(VMALLOC_SIZE >> 28) - 1
  95         bgt     5f
  96         lhz     r11,PACAVMALLOCSLLP(r13)
  97         b       6f
  98 5:
  99         /* IO mapping */
 100 .globl slb_miss_kernel_load_io
 101 slb_miss_kernel_load_io:
 102         li      r11,0
 103 6:
 104         /*
 105          * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
 106          * r9 = region id.
 107          */
 108         addis   r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@ha
 109         addi    r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@l
 110
 111 BEGIN_FTR_SECTION
 112         b       slb_finish_load
 113 END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
 114         b       slb_finish_load_1T
 115
 116 0:
 117         /* when using slices, we extract the psize off the slice bitmaps
 118          * and then we need to get the sllp encoding off the mmu_psize_defs
 119          * array.
 120          *
 121          * XXX This is a bit inefficient especially for the normal case,
 122          * so we should try to implement a fast path for the standard page
 123          * size using the old sllp value so we avoid the array. We cannot
 124          * really do dynamic patching unfortunately as processes might flip
 125          * between 4k and 64k standard page size
 126          */
 127 #ifdef CONFIG_PPC_MM_SLICES
 128         /* r10 have esid */
 129         cmpldi  r10,16
 130         /* below SLICE_LOW_TOP */
 131         blt     5f
 132         /*
 133          * Handle hpsizes,
 134          * r9 is get_paca()->context.high_slices_psize[index], r11 is mask_index
 135          */
 136         srdi    r11,r10,(SLICE_HIGH_SHIFT - SLICE_LOW_SHIFT + 1) /* index */
 137         addi    r9,r11,PACAHIGHSLICEPSIZE
 138         lbzx    r9,r13,r9               /* r9 is hpsizes[r11] */
 139         /* r11 = (r10 >> (SLICE_HIGH_SHIFT - SLICE_LOW_SHIFT)) & 0x1 */
 140         rldicl  r11,r10,(64 - (SLICE_HIGH_SHIFT - SLICE_LOW_SHIFT)),63
 141         b       6f
 142
 143 5:
 144         /*
 145          * Handle lpsizes
 146          * r9 is get_paca()->context.low_slices_psize, r11 is index
 147          */
 148         ld      r9,PACALOWSLICESPSIZE(r13)
 149         mr      r11,r10
 150 6:
 151         sldi    r11,r11,2  /* index * 4 */
 152         /* Extract the psize and multiply to get an array offset */
 153         srd     r9,r9,r11
 154         andi.   r9,r9,0xf
 155         mulli   r9,r9,MMUPSIZEDEFSIZE
 156
 157         /* Now get to the array and obtain the sllp
 158          */
 159         ld      r11,PACATOC(r13)
 160         ld      r11,mmu_psize_defs@got(r11)
 161         add     r11,r11,r9
 162         ld      r11,MMUPSIZESLLP(r11)
 163         ori     r11,r11,SLB_VSID_USER
 164 #else
 165         /* paca context sllp already contains the SLB_VSID_USER bits */
 166         lhz     r11,PACACONTEXTSLLP(r13)
 167 #endif /* CONFIG_PPC_MM_SLICES */
 168
 169         ld      r9,PACACONTEXTID(r13)
 170 BEGIN_FTR_SECTION
 171         cmpldi  r10,0x1000
 172         bge     slb_finish_load_1T
 173 END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 174         b       slb_finish_load
 175
 176 8:      /* invalid EA */
 177         li      r10,0                   /* BAD_VSID */
 178         li      r9,0                    /* BAD_VSID */
 179         li      r11,SLB_VSID_USER       /* flags don't much matter */
 180         b       slb_finish_load
 181
 182 #ifdef __DISABLED__
 183
 184 /* void slb_allocate_user(unsigned long ea);
 185  *
 186  * Create an SLB entry for the given EA (user or kernel).
 187  *      r3 = faulting address, r13 = PACA
 188  *      r9, r10, r11 are clobbered by this function
 189  * No other registers are examined or changed.
 190  *
 191  * It is called with translation enabled in order to be able to walk the
 192  * page tables. This is not currently used.
 193  */
 194 _GLOBAL(slb_allocate_user)
 195         /* r3 = faulting address */
 196         srdi    r10,r3,28               /* get esid */
 197
 198         crset   4*cr7+lt                /* set "user" flag for later */
 199
 200         /* check if we fit in the range covered by the pagetables*/
 201         srdi.   r9,r3,PGTABLE_EADDR_SIZE
 202         crnot   4*cr0+eq,4*cr0+eq
 203         beqlr
 204
 205         /* now we need to get to the page tables in order to get the page
 206          * size encoding from the PMD. In the future, we'll be able to deal
 207          * with 1T segments too by getting the encoding from the PGD instead
 208          */
 209         ld      r9,PACAPGDIR(r13)
 210         cmpldi  cr0,r9,0
 211         beqlr
 212         rlwinm  r11,r10,8,25,28
 213         ldx     r9,r9,r11               /* get pgd_t */
 214         cmpldi  cr0,r9,0
 215         beqlr
 216         rlwinm  r11,r10,3,17,28
 217         ldx     r9,r9,r11               /* get pmd_t */
 218         cmpldi  cr0,r9,0
 219         beqlr
 220
 221         /* build vsid flags */
 222         andi.   r11,r9,SLB_VSID_LLP
 223         ori     r11,r11,SLB_VSID_USER
 224
 225         /* get context to calculate proto-VSID */
 226         ld      r9,PACACONTEXTID(r13)
 227         /* fall through slb_finish_load */
 228
 229 #endif /* __DISABLED__ */
 230
 231
 232 /*
 233  * Finish loading of an SLB entry and return
 234  *
 235  * r3 = EA, r9 = context, r10 = ESID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET
 236  */
 237 slb_finish_load:
 238         rldimi  r10,r9,ESID_BITS,0
 239         ASM_VSID_SCRAMBLE(r10,r9,256M)
 240         /*
 241          * bits above VSID_BITS_256M need to be ignored from r10
 242          * also combine VSID and flags
 243          */
 244         rldimi  r11,r10,SLB_VSID_SHIFT,(64 - (SLB_VSID_SHIFT + VSID_BITS_256M))
 245
 246         /* r3 = EA, r11 = VSID data */
 247         /*
 248          * Find a slot, round robin. Previously we tried to find a
 249          * free slot first but that took too long. Unfortunately we
 250          * dont have any LRU information to help us choose a slot.
 251          */
 252
 253 7:      ld      r10,PACASTABRR(r13)
 254         addi    r10,r10,1
 255         /* This gets soft patched on boot. */
 256 .globl slb_compare_rr_to_size
 257 slb_compare_rr_to_size:
 258         cmpldi  r10,0
 259
 260         blt+    4f
 261         li      r10,SLB_NUM_BOLTED
 262
 263 4:
 264         std     r10,PACASTABRR(r13)
 265
 266 3:
 267         rldimi  r3,r10,0,36             /* r3= EA[0:35] | entry */
 268         oris    r10,r3,SLB_ESID_V@h     /* r3 |= SLB_ESID_V */
 269
 270         /* r3 = ESID data, r11 = VSID data */
 271
 272         /*
 273          * No need for an isync before or after this slbmte. The exception
 274          * we enter with and the rfid we exit with are context synchronizing.
 275          */
 276         slbmte  r11,r10
 277
 278         /* we're done for kernel addresses */
 279         crclr   4*cr0+eq                /* set result to "success" */
 280         bgelr   cr7
 281
 282         /* Update the slb cache */
 283         lhz     r3,PACASLBCACHEPTR(r13) /* offset = paca->slb_cache_ptr */
 284         cmpldi  r3,SLB_CACHE_ENTRIES
 285         bge     1f
 286
 287         /* still room in the slb cache */
 288         sldi    r11,r3,2                /* r11 = offset * sizeof(u32) */
 289         srdi    r10,r10,28              /* get the 36 bits of the ESID */
 290         add     r11,r11,r13             /* r11 = (u32 *)paca + offset */
 291         stw     r10,PACASLBCACHE(r11)   /* paca->slb_cache[offset] = esid */
 292         addi    r3,r3,1                 /* offset++ */
 293         b       2f
 294 1:                                      /* offset >= SLB_CACHE_ENTRIES */
 295         li      r3,SLB_CACHE_ENTRIES+1
 296 2:
 297         sth     r3,PACASLBCACHEPTR(r13) /* paca->slb_cache_ptr = offset */
 298         crclr   4*cr0+eq                /* set result to "success" */
 299         blr
 300
 301 /*
 302  * Finish loading of a 1T SLB entry (for the kernel linear mapping) and return.
 303  *
 304  * r3 = EA, r9 = context, r10 = ESID(256MB), r11 = flags, clobbers r9
 305  */
 306 slb_finish_load_1T:
 307         srdi    r10,r10,(SID_SHIFT_1T - SID_SHIFT)      /* get 1T ESID */
 308         rldimi  r10,r9,ESID_BITS_1T,0
 309         ASM_VSID_SCRAMBLE(r10,r9,1T)
 310         /*
 311          * bits above VSID_BITS_1T need to be ignored from r10
 312          * also combine VSID and flags
 313          */
 314         rldimi  r11,r10,SLB_VSID_SHIFT_1T,(64 - (SLB_VSID_SHIFT_1T + VSID_BITS_1T))
 315         li      r10,MMU_SEGSIZE_1T
 316         rldimi  r11,r10,SLB_VSID_SSIZE_SHIFT,0  /* insert segment size */
 317
 318         /* r3 = EA, r11 = VSID data */
 319         clrrdi  r3,r3,SID_SHIFT_1T      /* clear out non-ESID bits */
 320         b       7b
 321