arch/powerpc/platforms/85xx/mpc85xx_mds.c

   1 /*
   2  * Copyright (C) Freescale Semicondutor, Inc. 2006-2010. All rights reserved.
   3  *
   4  * Author: Andy Fleming <afleming@freescale.com>
   5  *
   6  * Based on 83xx/mpc8360e_pb.c by:
   7  *         Li Yang <LeoLi@freescale.com>
   8  *         Yin Olivia <Hong-hua.Yin@freescale.com>
   9  *
  10  * Description:
  11  * MPC85xx MDS board specific routines.
  12  *
  13  * This program is free software; you can redistribute  it and/or modify it
  14  * under  the terms of  the GNU General  Public License as published by the
  15  * Free Software Foundation;  either version 2 of the  License, or (at your
  16  * option) any later version.
  17  */
  18
  19 #include <linux/stddef.h>
  20 #include <linux/kernel.h>
  21 #include <linux/init.h>
  22 #include <linux/errno.h>
  23 #include <linux/reboot.h>
  24 #include <linux/pci.h>
  25 #include <linux/kdev_t.h>
  26 #include <linux/major.h>
  27 #include <linux/console.h>
  28 #include <linux/delay.h>
  29 #include <linux/seq_file.h>
  30 #include <linux/initrd.h>
  31 #include <linux/fsl_devices.h>
  32 #include <linux/of_platform.h>
  33 #include <linux/of_device.h>
  34 #include <linux/phy.h>
  35 #include <linux/memblock.h>
  36
  37 #include <asm/system.h>
  38 #include <linux/atomic.h>
  39 #include <asm/time.h>
  40 #include <asm/io.h>
  41 #include <asm/machdep.h>
  42 #include <asm/pci-bridge.h>
  43 #include <asm/irq.h>
  44 #include <mm/mmu_decl.h>
  45 #include <asm/prom.h>
  46 #include <asm/udbg.h>
  47 #include <sysdev/fsl_soc.h>
  48 #include <sysdev/fsl_pci.h>
  49 #include <sysdev/simple_gpio.h>
  50 #include <asm/qe.h>
  51 #include <asm/qe_ic.h>
  52 #include <asm/mpic.h>
  53 #include <asm/swiotlb.h>
  54
  55 #undef DEBUG
  56 #ifdef DEBUG
  57 #define DBG(fmt...) udbg_printf(fmt)
  58 #else
  59 #define DBG(fmt...)
  60 #endif
  61
  62 #define MV88E1111_SCR   0x10
  63 #define MV88E1111_SCR_125CLK    0x0010
  64 static int mpc8568_fixup_125_clock(struct phy_device *phydev)
  65 {
  66         int scr;
  67         int err;
  68
  69         /* Workaround for the 125 CLK Toggle */
  70         scr = phy_read(phydev, MV88E1111_SCR);
  71
  72         if (scr < 0)
  73                 return scr;
  74
  75         err = phy_write(phydev, MV88E1111_SCR, scr & ~(MV88E1111_SCR_125CLK));
  76
  77         if (err)
  78                 return err;
  79
  80         err = phy_write(phydev, MII_BMCR, BMCR_RESET);
  81
  82         if (err)
  83                 return err;
  84
  85         scr = phy_read(phydev, MV88E1111_SCR);
  86
  87         if (scr < 0)
  88                 return scr;
  89
  90         err = phy_write(phydev, MV88E1111_SCR, scr | 0x0008);
  91
  92         return err;
  93 }
  94
  95 static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
  96 {
  97         int temp;
  98         int err;
  99
 100         /* Errata */
 101         err = phy_write(phydev,29, 0x0006);
 102
 103         if (err)
 104                 return err;
 105
 106         temp = phy_read(phydev, 30);
 107
 108         if (temp < 0)
 109                 return temp;
 110
 111         temp = (temp & (~0x8000)) | 0x4000;
 112         err = phy_write(phydev,30, temp);
 113
 114         if (err)
 115                 return err;
 116
 117         err = phy_write(phydev,29, 0x000a);
 118
 119         if (err)
 120                 return err;
 121
 122         temp = phy_read(phydev, 30);
 123
 124         if (temp < 0)
 125                 return temp;
 126
 127         temp = phy_read(phydev, 30);
 128
 129         if (temp < 0)
 130                 return temp;
 131
 132         temp &= ~0x0020;
 133
 134         err = phy_write(phydev,30,temp);
 135
 136         if (err)
 137                 return err;
 138
 139         /* Disable automatic MDI/MDIX selection */
 140         temp = phy_read(phydev, 16);
 141
 142         if (temp < 0)
 143                 return temp;
 144
 145         temp &= ~0x0060;
 146         err = phy_write(phydev,16,temp);
 147
 148         return err;
 149 }
 150
 151 /* ************************************************************************
 152  *
 153  * Setup the architecture
 154  *
 155  */
 156 #ifdef CONFIG_SMP
 157 extern void __init mpc85xx_smp_init(void);
 158 #endif
 159
 160 #ifdef CONFIG_QUICC_ENGINE
 161 static struct of_device_id mpc85xx_qe_ids[] __initdata = {
 162         { .type = "qe", },
 163         { .compatible = "fsl,qe", },
 164         { },
 165 };
 166
 167 static void __init mpc85xx_publish_qe_devices(void)
 168 {
 169         struct device_node *np;
 170
 171         np = of_find_compatible_node(NULL, NULL, "fsl,qe");
 172         if (!of_device_is_available(np)) {
 173                 of_node_put(np);
 174                 return;
 175         }
 176
 177         of_platform_bus_probe(NULL, mpc85xx_qe_ids, NULL);
 178 }
 179
 180 static void __init mpc85xx_mds_reset_ucc_phys(void)
 181 {
 182         struct device_node *np;
 183         static u8 __iomem *bcsr_regs;
 184
 185         /* Map BCSR area */
 186         np = of_find_node_by_name(NULL, "bcsr");
 187         if (!np)
 188                 return;
 189
 190         bcsr_regs = of_iomap(np, 0);
 191         of_node_put(np);
 192         if (!bcsr_regs)
 193                 return;
 194
 195         if (machine_is(mpc8568_mds)) {
 196 #define BCSR_UCC1_GETH_EN       (0x1 << 7)
 197 #define BCSR_UCC2_GETH_EN       (0x1 << 7)
 198 #define BCSR_UCC1_MODE_MSK      (0x3 << 4)
 199 #define BCSR_UCC2_MODE_MSK      (0x3 << 0)
 200
 201                 /* Turn off UCC1 & UCC2 */
 202                 clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
 203                 clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
 204
 205                 /* Mode is RGMII, all bits clear */
 206                 clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK |
 207                                          BCSR_UCC2_MODE_MSK);
 208
 209                 /* Turn UCC1 & UCC2 on */
 210                 setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
 211                 setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
 212         } else if (machine_is(mpc8569_mds)) {
 213 #define BCSR7_UCC12_GETHnRST    (0x1 << 2)
 214 #define BCSR8_UEM_MARVELL_RST   (0x1 << 1)
 215 #define BCSR_UCC_RGMII          (0x1 << 6)
 216 #define BCSR_UCC_RTBI           (0x1 << 5)
 217                 /*
 218                  * U-Boot mangles interrupt polarity for Marvell PHYs,
 219                  * so reset built-in and UEM Marvell PHYs, this puts
 220                  * the PHYs into their normal state.
 221                  */
 222                 clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
 223                 setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
 224
 225                 setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
 226                 clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
 227
 228                 for (np = NULL; (np = of_find_compatible_node(np,
 229                                                 "network",
 230                                                 "ucc_geth")) != NULL;) {
 231                         const unsigned int *prop;
 232                         int ucc_num;
 233
 234                         prop = of_get_property(np, "cell-index", NULL);
 235                         if (prop == NULL)
 236                                 continue;
 237
 238                         ucc_num = *prop - 1;
 239
 240                         prop = of_get_property(np, "phy-connection-type", NULL);
 241                         if (prop == NULL)
 242                                 continue;
 243
 244                         if (strcmp("rtbi", (const char *)prop) == 0)
 245                                 clrsetbits_8(&bcsr_regs[7 + ucc_num],
 246                                         BCSR_UCC_RGMII, BCSR_UCC_RTBI);
 247                 }
 248         } else if (machine_is(p1021_mds)) {
 249 #define BCSR11_ENET_MICRST     (0x1 << 5)
 250                 /* Reset Micrel PHY */
 251                 clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
 252                 setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
 253         }
 254
 255         iounmap(bcsr_regs);
 256 }
 257
 258 static void __init mpc85xx_mds_qe_init(void)
 259 {
 260         struct device_node *np;
 261
 262         np = of_find_compatible_node(NULL, NULL, "fsl,qe");
 263         if (!np) {
 264                 np = of_find_node_by_name(NULL, "qe");
 265                 if (!np)
 266                         return;
 267         }
 268
 269         if (!of_device_is_available(np)) {
 270                 of_node_put(np);
 271                 return;
 272         }
 273
 274         qe_reset();
 275         of_node_put(np);
 276
 277         np = of_find_node_by_name(NULL, "par_io");
 278         if (np) {
 279                 struct device_node *ucc;
 280
 281                 par_io_init(np);
 282                 of_node_put(np);
 283
 284                 for_each_node_by_name(ucc, "ucc")
 285                         par_io_of_config(ucc);
 286         }
 287
 288         mpc85xx_mds_reset_ucc_phys();
 289
 290         if (machine_is(p1021_mds)) {
 291 #define MPC85xx_PMUXCR_OFFSET           0x60
 292 #define MPC85xx_PMUXCR_QE0              0x00008000
 293 #define MPC85xx_PMUXCR_QE3              0x00001000
 294 #define MPC85xx_PMUXCR_QE9              0x00000040
 295 #define MPC85xx_PMUXCR_QE12             0x00000008
 296                 static __be32 __iomem *pmuxcr;
 297
 298                 np = of_find_node_by_name(NULL, "global-utilities");
 299
 300                 if (np) {
 301                         pmuxcr = of_iomap(np, 0) + MPC85xx_PMUXCR_OFFSET;
 302
 303                         if (!pmuxcr)
 304                                 printk(KERN_EMERG "Error: Alternate function"
 305                                         " signal multiplex control register not"
 306                                         " mapped!\n");
 307                         else
 308                         /* P1021 has pins muxed for QE and other functions. To
 309                          * enable QE UEC mode, we need to set bit QE0 for UCC1
 310                          * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
 311                          * and QE12 for QE MII management signals in PMUXCR
 312                          * register.
 313                          */
 314                                 setbits32(pmuxcr, MPC85xx_PMUXCR_QE0 |
 315                                                   MPC85xx_PMUXCR_QE3 |
 316                                                   MPC85xx_PMUXCR_QE9 |
 317                                                   MPC85xx_PMUXCR_QE12);
 318
 319                         of_node_put(np);
 320                 }
 321
 322         }
 323 }
 324
 325 static void __init mpc85xx_mds_qeic_init(void)
 326 {
 327         struct device_node *np;
 328
 329         np = of_find_compatible_node(NULL, NULL, "fsl,qe");
 330         if (!of_device_is_available(np)) {
 331                 of_node_put(np);
 332                 return;
 333         }
 334
 335         np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
 336         if (!np) {
 337                 np = of_find_node_by_type(NULL, "qeic");
 338                 if (!np)
 339                         return;
 340         }
 341
 342         if (machine_is(p1021_mds))
 343                 qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
 344                                 qe_ic_cascade_high_mpic);
 345         else
 346                 qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
 347         of_node_put(np);
 348 }
 349 #else
 350 static void __init mpc85xx_publish_qe_devices(void) { }
 351 static void __init mpc85xx_mds_qe_init(void) { }
 352 static void __init mpc85xx_mds_qeic_init(void) { }
 353 #endif  /* CONFIG_QUICC_ENGINE */
 354
 355 static void __init mpc85xx_mds_setup_arch(void)
 356 {
 357 #ifdef CONFIG_PCI
 358         struct pci_controller *hose;
 359         struct device_node *np;
 360 #endif
 361         dma_addr_t max = 0xffffffff;
 362
 363         if (ppc_md.progress)
 364                 ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
 365
 366 #ifdef CONFIG_PCI
 367         for_each_node_by_type(np, "pci") {
 368                 if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
 369                     of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
 370                         struct resource rsrc;
 371                         of_address_to_resource(np, 0, &rsrc);
 372                         if ((rsrc.start & 0xfffff) == 0x8000)
 373                                 fsl_add_bridge(np, 1);
 374                         else
 375                                 fsl_add_bridge(np, 0);
 376
 377                         hose = pci_find_hose_for_OF_device(np);
 378                         max = min(max, hose->dma_window_base_cur +
 379                                         hose->dma_window_size);
 380                 }
 381         }
 382 #endif
 383
 384 #ifdef CONFIG_SMP
 385         mpc85xx_smp_init();
 386 #endif
 387
 388         mpc85xx_mds_qe_init();
 389
 390 #ifdef CONFIG_SWIOTLB
 391         if (memblock_end_of_DRAM() > max) {
 392                 ppc_swiotlb_enable = 1;
 393                 set_pci_dma_ops(&swiotlb_dma_ops);
 394                 ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
 395         }
 396 #endif
 397 }
 398
 399
 400 static int __init board_fixups(void)
 401 {
 402         char phy_id[20];
 403         char *compstrs[2] = {"fsl,gianfar-mdio", "fsl,ucc-mdio"};
 404         struct device_node *mdio;
 405         struct resource res;
 406         int i;
 407
 408         for (i = 0; i < ARRAY_SIZE(compstrs); i++) {
 409                 mdio = of_find_compatible_node(NULL, NULL, compstrs[i]);
 410
 411                 of_address_to_resource(mdio, 0, &res);
 412                 snprintf(phy_id, sizeof(phy_id), "%llx:%02x",
 413                         (unsigned long long)res.start, 1);
 414
 415                 phy_register_fixup_for_id(phy_id, mpc8568_fixup_125_clock);
 416                 phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
 417
 418                 /* Register a workaround for errata */
 419                 snprintf(phy_id, sizeof(phy_id), "%llx:%02x",
 420                         (unsigned long long)res.start, 7);
 421                 phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
 422
 423                 of_node_put(mdio);
 424         }
 425
 426         return 0;
 427 }
 428 machine_arch_initcall(mpc8568_mds, board_fixups);
 429 machine_arch_initcall(mpc8569_mds, board_fixups);
 430
 431 static struct of_device_id mpc85xx_ids[] = {
 432         { .type = "soc", },
 433         { .compatible = "soc", },
 434         { .compatible = "simple-bus", },
 435         { .compatible = "gianfar", },
 436         { .compatible = "fsl,srio", },
 437         { .compatible = "fsl,mpc8548-guts", },
 438         { .compatible = "gpio-leds", },
 439         {},
 440 };
 441
 442 static struct of_device_id p1021_ids[] = {
 443         { .type = "soc", },
 444         { .compatible = "soc", },
 445         { .compatible = "simple-bus", },
 446         { .compatible = "gianfar", },
 447         {},
 448 };
 449
 450 static int __init mpc85xx_publish_devices(void)
 451 {
 452         if (machine_is(mpc8568_mds))
 453                 simple_gpiochip_init("fsl,mpc8568mds-bcsr-gpio");
 454         if (machine_is(mpc8569_mds))
 455                 simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
 456
 457         of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
 458         mpc85xx_publish_qe_devices();
 459
 460         return 0;
 461 }
 462
 463 static int __init p1021_publish_devices(void)
 464 {
 465         of_platform_bus_probe(NULL, p1021_ids, NULL);
 466         mpc85xx_publish_qe_devices();
 467
 468         return 0;
 469 }
 470
 471 machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
 472 machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
 473 machine_device_initcall(p1021_mds, p1021_publish_devices);
 474
 475 machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
 476 machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);
 477 machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier);
 478
 479 static void __init mpc85xx_mds_pic_init(void)
 480 {
 481         struct mpic *mpic;
 482         struct resource r;
 483         struct device_node *np = NULL;
 484
 485         np = of_find_node_by_type(NULL, "open-pic");
 486         if (!np)
 487                 return;
 488
 489         if (of_address_to_resource(np, 0, &r)) {
 490                 printk(KERN_ERR "Failed to map mpic register space\n");
 491                 of_node_put(np);
 492                 return;
 493         }
 494
 495         mpic = mpic_alloc(np, r.start,
 496                         MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
 497                         MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
 498                         0, 256, " OpenPIC  ");
 499         BUG_ON(mpic == NULL);
 500         of_node_put(np);
 501
 502         mpic_init(mpic);
 503         mpc85xx_mds_qeic_init();
 504 }
 505
 506 static int __init mpc85xx_mds_probe(void)
 507 {
 508         unsigned long root = of_get_flat_dt_root();
 509
 510         return of_flat_dt_is_compatible(root, "MPC85xxMDS");
 511 }
 512
 513 define_machine(mpc8568_mds) {
 514         .name           = "MPC8568 MDS",
 515         .probe          = mpc85xx_mds_probe,
 516         .setup_arch     = mpc85xx_mds_setup_arch,
 517         .init_IRQ       = mpc85xx_mds_pic_init,
 518         .get_irq        = mpic_get_irq,
 519         .restart        = fsl_rstcr_restart,
 520         .calibrate_decr = generic_calibrate_decr,
 521         .progress       = udbg_progress,
 522 #ifdef CONFIG_PCI
 523         .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
 524 #endif
 525 };
 526
 527 static int __init mpc8569_mds_probe(void)
 528 {
 529         unsigned long root = of_get_flat_dt_root();
 530
 531         return of_flat_dt_is_compatible(root, "fsl,MPC8569EMDS");
 532 }
 533
 534 define_machine(mpc8569_mds) {
 535         .name           = "MPC8569 MDS",
 536         .probe          = mpc8569_mds_probe,
 537         .setup_arch     = mpc85xx_mds_setup_arch,
 538         .init_IRQ       = mpc85xx_mds_pic_init,
 539         .get_irq        = mpic_get_irq,
 540         .restart        = fsl_rstcr_restart,
 541         .calibrate_decr = generic_calibrate_decr,
 542         .progress       = udbg_progress,
 543 #ifdef CONFIG_PCI
 544         .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
 545 #endif
 546 };
 547
 548 static int __init p1021_mds_probe(void)
 549 {
 550         unsigned long root = of_get_flat_dt_root();
 551
 552         return of_flat_dt_is_compatible(root, "fsl,P1021MDS");
 553
 554 }
 555
 556 define_machine(p1021_mds) {
 557         .name           = "P1021 MDS",
 558         .probe          = p1021_mds_probe,
 559         .setup_arch     = mpc85xx_mds_setup_arch,
 560         .init_IRQ       = mpc85xx_mds_pic_init,
 561         .get_irq        = mpic_get_irq,
 562         .restart        = fsl_rstcr_restart,
 563         .calibrate_decr = generic_calibrate_decr,
 564         .progress       = udbg_progress,
 565 #ifdef CONFIG_PCI
 566         .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
 567 #endif
 568 };
 569