arch/powerpc/platforms/86xx/gef_sbc310.c

   1 /*
   2  * GE SBC310 board support
   3  *
   4  * Author: Martyn Welch <martyn.welch@ge.com>
   5  *
   6  * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
   7  *
   8  * This program is free software; you can redistribute  it and/or modify it
   9  * under  the terms of  the GNU General  Public License as published by the
  10  * Free Software Foundation;  either version 2 of the  License, or (at your
  11  * option) any later version.
  12  *
  13  * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines)
  14  * Copyright 2006 Freescale Semiconductor Inc.
  15  *
  16  * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c
  17  */
  18
  19 #include <linux/stddef.h>
  20 #include <linux/kernel.h>
  21 #include <linux/pci.h>
  22 #include <linux/kdev_t.h>
  23 #include <linux/delay.h>
  24 #include <linux/seq_file.h>
  25 #include <linux/of_platform.h>
  26
  27 #include <asm/time.h>
  28 #include <asm/machdep.h>
  29 #include <asm/pci-bridge.h>
  30 #include <asm/prom.h>
  31 #include <mm/mmu_decl.h>
  32 #include <asm/udbg.h>
  33
  34 #include <asm/mpic.h>
  35 #include <asm/nvram.h>
  36
  37 #include <sysdev/fsl_pci.h>
  38 #include <sysdev/fsl_soc.h>
  39 #include <sysdev/ge/ge_pic.h>
  40
  41 #include "mpc86xx.h"
  42
  43 #undef DEBUG
  44
  45 #ifdef DEBUG
  46 #define DBG (fmt...) do { printk(KERN_ERR "SBC310: " fmt); } while (0)
  47 #else
  48 #define DBG (fmt...) do { } while (0)
  49 #endif
  50
  51 void __iomem *sbc310_regs;
  52
  53 static void __init gef_sbc310_init_irq(void)
  54 {
  55         struct device_node *cascade_node = NULL;
  56
  57         mpc86xx_init_irq();
  58
  59         /*
  60          * There is a simple interrupt handler in the main FPGA, this needs
  61          * to be cascaded into the MPIC
  62          */
  63         cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic");
  64         if (!cascade_node) {
  65                 printk(KERN_WARNING "SBC310: No FPGA PIC\n");
  66                 return;
  67         }
  68
  69         gef_pic_init(cascade_node);
  70         of_node_put(cascade_node);
  71 }
  72
  73 static void __init gef_sbc310_setup_arch(void)
  74 {
  75         struct device_node *regs;
  76         printk(KERN_INFO "GE Intelligent Platforms SBC310 6U VPX SBC\n");
  77
  78 #ifdef CONFIG_SMP
  79         mpc86xx_smp_init();
  80 #endif
  81
  82         fsl_pci_assign_primary();
  83
  84         /* Remap basic board registers */
  85         regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs");
  86         if (regs) {
  87                 sbc310_regs = of_iomap(regs, 0);
  88                 if (sbc310_regs == NULL)
  89                         printk(KERN_WARNING "Unable to map board registers\n");
  90                 of_node_put(regs);
  91         }
  92
  93 #if defined(CONFIG_MMIO_NVRAM)
  94         mmio_nvram_init();
  95 #endif
  96 }
  97
  98 /* Return the PCB revision */
  99 static unsigned int gef_sbc310_get_board_id(void)
 100 {
 101         unsigned int reg;
 102
 103         reg = ioread32(sbc310_regs);
 104         return reg & 0xff;
 105 }
 106
 107 /* Return the PCB revision */
 108 static unsigned int gef_sbc310_get_pcb_rev(void)
 109 {
 110         unsigned int reg;
 111
 112         reg = ioread32(sbc310_regs);
 113         return (reg >> 8) & 0xff;
 114 }
 115
 116 /* Return the board (software) revision */
 117 static unsigned int gef_sbc310_get_board_rev(void)
 118 {
 119         unsigned int reg;
 120
 121         reg = ioread32(sbc310_regs);
 122         return (reg >> 16) & 0xff;
 123 }
 124
 125 /* Return the FPGA revision */
 126 static unsigned int gef_sbc310_get_fpga_rev(void)
 127 {
 128         unsigned int reg;
 129
 130         reg = ioread32(sbc310_regs);
 131         return (reg >> 24) & 0xf;
 132 }
 133
 134 static void gef_sbc310_show_cpuinfo(struct seq_file *m)
 135 {
 136         uint svid = mfspr(SPRN_SVR);
 137
 138         seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
 139
 140         seq_printf(m, "Board ID\t: 0x%2.2x\n", gef_sbc310_get_board_id());
 141         seq_printf(m, "Revision\t: %u%c\n", gef_sbc310_get_pcb_rev(),
 142                 ('A' + gef_sbc310_get_board_rev() - 1));
 143         seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc310_get_fpga_rev());
 144
 145         seq_printf(m, "SVR\t\t: 0x%x\n", svid);
 146
 147 }
 148
 149 static void gef_sbc310_nec_fixup(struct pci_dev *pdev)
 150 {
 151         unsigned int val;
 152
 153         /* Do not do the fixup on other platforms! */
 154         if (!machine_is(gef_sbc310))
 155                 return;
 156
 157         printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
 158
 159         /* Ensure only ports 1 & 2 are enabled */
 160         pci_read_config_dword(pdev, 0xe0, &val);
 161         pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x2);
 162
 163         /* System clock is 48-MHz Oscillator and EHCI Enabled. */
 164         pci_write_config_dword(pdev, 0xe4, 1 << 5);
 165 }
 166 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
 167         gef_sbc310_nec_fixup);
 168
 169 /*
 170  * Called very early, device-tree isn't unflattened
 171  *
 172  * This function is called to determine whether the BSP is compatible with the
 173  * supplied device-tree, which is assumed to be the correct one for the actual
 174  * board. It is expected thati, in the future, a kernel may support multiple
 175  * boards.
 176  */
 177 static int __init gef_sbc310_probe(void)
 178 {
 179         unsigned long root = of_get_flat_dt_root();
 180
 181         if (of_flat_dt_is_compatible(root, "gef,sbc310"))
 182                 return 1;
 183
 184         return 0;
 185 }
 186
 187 machine_arch_initcall(gef_sbc310, mpc86xx_common_publish_devices);
 188
 189 define_machine(gef_sbc310) {
 190         .name                   = "GE SBC310",
 191         .probe                  = gef_sbc310_probe,
 192         .setup_arch             = gef_sbc310_setup_arch,
 193         .init_IRQ               = gef_sbc310_init_irq,
 194         .show_cpuinfo           = gef_sbc310_show_cpuinfo,
 195         .get_irq                = mpic_get_irq,
 196         .restart                = fsl_rstcr_restart,
 197         .time_init              = mpc86xx_time_init,
 198         .calibrate_decr         = generic_calibrate_decr,
 199         .progress               = udbg_progress,
 200 #ifdef CONFIG_PCI
 201         .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
 202 #endif
 203 };