arch/powerpc/platforms/86xx/mpc8610_hpcd.c

   1 /*
   2  * MPC8610 HPCD board specific routines
   3  *
   4  * Initial author: Xianghua Xiao <x.xiao@freescale.com>
   5  * Recode: Jason Jin <jason.jin@freescale.com>
   6  *         York Sun <yorksun@freescale.com>
   7  *
   8  * Rewrite the interrupt routing. remove the 8259PIC support,
   9  * All the integrated device in ULI use sideband interrupt.
  10  *
  11  * Copyright 2008 Freescale Semiconductor Inc.
  12  *
  13  * This program is free software; you can redistribute  it and/or modify it
  14  * under  the terms of  the GNU General  Public License as published by the
  15  * Free Software Foundation;  either version 2 of the  License, or (at your
  16  * option) any later version.
  17  */
  18
  19 #include <linux/stddef.h>
  20 #include <linux/kernel.h>
  21 #include <linux/pci.h>
  22 #include <linux/kdev_t.h>
  23 #include <linux/delay.h>
  24 #include <linux/seq_file.h>
  25 #include <linux/of.h>
  26
  27 #include <asm/system.h>
  28 #include <asm/time.h>
  29 #include <asm/machdep.h>
  30 #include <asm/pci-bridge.h>
  31 #include <asm/prom.h>
  32 #include <mm/mmu_decl.h>
  33 #include <asm/udbg.h>
  34
  35 #include <asm/mpic.h>
  36
  37 #include <linux/of_platform.h>
  38 #include <sysdev/fsl_pci.h>
  39 #include <sysdev/fsl_soc.h>
  40
  41 #include "mpc86xx.h"
  42
  43 static unsigned char *pixis_bdcfg0, *pixis_arch;
  44
  45 static struct of_device_id __initdata mpc8610_ids[] = {
  46         { .compatible = "fsl,mpc8610-immr", },
  47         { .compatible = "simple-bus", },
  48         { .compatible = "gianfar", },
  49         {}
  50 };
  51
  52 static int __init mpc8610_declare_of_platform_devices(void)
  53 {
  54         /* Without this call, the SSI device driver won't get probed. */
  55         of_platform_bus_probe(NULL, mpc8610_ids, NULL);
  56
  57         return 0;
  58 }
  59 machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
  60
  61 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
  62
  63 static u32 get_busfreq(void)
  64 {
  65         struct device_node *node;
  66
  67         u32 fs_busfreq = 0;
  68         node = of_find_node_by_type(NULL, "cpu");
  69         if (node) {
  70                 unsigned int size;
  71                 const unsigned int *prop =
  72                         of_get_property(node, "bus-frequency", &size);
  73                 if (prop)
  74                         fs_busfreq = *prop;
  75                 of_node_put(node);
  76         };
  77         return fs_busfreq;
  78 }
  79
  80 unsigned int mpc8610hpcd_get_pixel_format(unsigned int bits_per_pixel,
  81                                                 int monitor_port)
  82 {
  83         static const unsigned long pixelformat[][3] = {
  84                 {0x88882317, 0x88083218, 0x65052119},
  85                 {0x88883316, 0x88082219, 0x65053118},
  86         };
  87         unsigned int pix_fmt, arch_monitor;
  88
  89         arch_monitor = ((*pixis_arch == 0x01) && (monitor_port == 0))? 0 : 1;
  90                 /* DVI port for board version 0x01 */
  91
  92         if (bits_per_pixel == 32)
  93                 pix_fmt = pixelformat[arch_monitor][0];
  94         else if (bits_per_pixel == 24)
  95                 pix_fmt = pixelformat[arch_monitor][1];
  96         else if (bits_per_pixel == 16)
  97                 pix_fmt = pixelformat[arch_monitor][2];
  98         else
  99                 pix_fmt = pixelformat[1][0];
 100
 101         return pix_fmt;
 102 }
 103
 104 void mpc8610hpcd_set_gamma_table(int monitor_port, char *gamma_table_base)
 105 {
 106         int i;
 107         if (monitor_port == 2) {                /* dual link LVDS */
 108                 for (i = 0; i < 256*3; i++)
 109                         gamma_table_base[i] = (gamma_table_base[i] << 2) |
 110                                          ((gamma_table_base[i] >> 6) & 0x03);
 111         }
 112 }
 113
 114 #define PX_BRDCFG0_DVISEL       (1 << 3)
 115 #define PX_BRDCFG0_DLINK        (1 << 4)
 116 #define PX_BRDCFG0_DIU_MASK     (PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK)
 117
 118 void mpc8610hpcd_set_monitor_port(int monitor_port)
 119 {
 120         static const u8 bdcfg[] = {
 121                 PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK,
 122                 PX_BRDCFG0_DLINK,
 123                 0,
 124         };
 125
 126         if (monitor_port < 3)
 127                 clrsetbits_8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK,
 128                              bdcfg[monitor_port]);
 129 }
 130
 131 void mpc8610hpcd_set_pixel_clock(unsigned int pixclock)
 132 {
 133         u32 __iomem *clkdvdr;
 134         u32 temp;
 135         /* variables for pixel clock calcs */
 136         ulong  bestval, bestfreq, speed_ccb, minpixclock, maxpixclock;
 137         ulong pixval;
 138         long err;
 139         int i;
 140
 141         clkdvdr = ioremap(get_immrbase() + 0xe0800, sizeof(u32));
 142         if (!clkdvdr) {
 143                 printk(KERN_ERR "Err: can't map clock divider register!\n");
 144                 return;
 145         }
 146
 147         /* Pixel Clock configuration */
 148         pr_debug("DIU: Bus Frequency = %d\n", get_busfreq());
 149         speed_ccb = get_busfreq();
 150
 151         /* Calculate the pixel clock with the smallest error */
 152         /* calculate the following in steps to avoid overflow */
 153         pr_debug("DIU pixclock in ps - %d\n", pixclock);
 154         temp = 1000000000/pixclock;
 155         temp *= 1000;
 156         pixclock = temp;
 157         pr_debug("DIU pixclock freq - %u\n", pixclock);
 158
 159         temp = pixclock * 5 / 100;
 160         pr_debug("deviation = %d\n", temp);
 161         minpixclock = pixclock - temp;
 162         maxpixclock = pixclock + temp;
 163         pr_debug("DIU minpixclock - %lu\n", minpixclock);
 164         pr_debug("DIU maxpixclock - %lu\n", maxpixclock);
 165         pixval = speed_ccb/pixclock;
 166         pr_debug("DIU pixval = %lu\n", pixval);
 167
 168         err = 100000000;
 169         bestval = pixval;
 170         pr_debug("DIU bestval = %lu\n", bestval);
 171
 172         bestfreq = 0;
 173         for (i = -1; i <= 1; i++) {
 174                 temp = speed_ccb / ((pixval+i) + 1);
 175                 pr_debug("DIU test pixval i= %d, pixval=%lu, temp freq. = %u\n",
 176                                                         i, pixval, temp);
 177                 if ((temp < minpixclock) || (temp > maxpixclock))
 178                         pr_debug("DIU exceeds monitor range (%lu to %lu)\n",
 179                                 minpixclock, maxpixclock);
 180                 else if (abs(temp - pixclock) < err) {
 181                   pr_debug("Entered the else if block %d\n", i);
 182                         err = abs(temp - pixclock);
 183                         bestval = pixval+i;
 184                         bestfreq = temp;
 185                 }
 186         }
 187
 188         pr_debug("DIU chose = %lx\n", bestval);
 189         pr_debug("DIU error = %ld\n NomPixClk ", err);
 190         pr_debug("DIU: Best Freq = %lx\n", bestfreq);
 191         /* Modify PXCLK in GUTS CLKDVDR */
 192         pr_debug("DIU: Current value of CLKDVDR = 0x%08x\n", (*clkdvdr));
 193         temp = (*clkdvdr) & 0x2000FFFF;
 194         *clkdvdr = temp;                /* turn off clock */
 195         *clkdvdr = temp | 0x80000000 | (((bestval) & 0x1F) << 16);
 196         pr_debug("DIU: Modified value of CLKDVDR = 0x%08x\n", (*clkdvdr));
 197         iounmap(clkdvdr);
 198 }
 199
 200 ssize_t mpc8610hpcd_show_monitor_port(int monitor_port, char *buf)
 201 {
 202         return snprintf(buf, PAGE_SIZE,
 203                         "%c0 - DVI\n"
 204                         "%c1 - Single link LVDS\n"
 205                         "%c2 - Dual link LVDS\n",
 206                         monitor_port == 0 ? '*' : ' ',
 207                         monitor_port == 1 ? '*' : ' ',
 208                         monitor_port == 2 ? '*' : ' ');
 209 }
 210
 211 int mpc8610hpcd_set_sysfs_monitor_port(int val)
 212 {
 213         return val < 3 ? val : 0;
 214 }
 215
 216 #endif
 217
 218 static void __init mpc86xx_hpcd_setup_arch(void)
 219 {
 220         struct resource r;
 221         struct device_node *np;
 222         unsigned char *pixis;
 223
 224         if (ppc_md.progress)
 225                 ppc_md.progress("mpc86xx_hpcd_setup_arch()", 0);
 226
 227 #ifdef CONFIG_PCI
 228         for_each_node_by_type(np, "pci") {
 229                 if (of_device_is_compatible(np, "fsl,mpc8610-pci")
 230                     || of_device_is_compatible(np, "fsl,mpc8641-pcie")) {
 231                         struct resource rsrc;
 232                         of_address_to_resource(np, 0, &rsrc);
 233                         if ((rsrc.start & 0xfffff) == 0xa000)
 234                                 fsl_add_bridge(np, 1);
 235                         else
 236                                 fsl_add_bridge(np, 0);
 237                 }
 238         }
 239 #endif
 240 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 241         diu_ops.get_pixel_format        = mpc8610hpcd_get_pixel_format;
 242         diu_ops.set_gamma_table         = mpc8610hpcd_set_gamma_table;
 243         diu_ops.set_monitor_port        = mpc8610hpcd_set_monitor_port;
 244         diu_ops.set_pixel_clock         = mpc8610hpcd_set_pixel_clock;
 245         diu_ops.show_monitor_port       = mpc8610hpcd_show_monitor_port;
 246         diu_ops.set_sysfs_monitor_port  = mpc8610hpcd_set_sysfs_monitor_port;
 247 #endif
 248
 249         np = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis");
 250         if (np) {
 251                 of_address_to_resource(np, 0, &r);
 252                 of_node_put(np);
 253                 pixis = ioremap(r.start, 32);
 254                 if (!pixis) {
 255                         printk(KERN_ERR "Err: can't map FPGA cfg register!\n");
 256                         return;
 257                 }
 258                 pixis_bdcfg0 = pixis + 8;
 259                 pixis_arch = pixis + 1;
 260         } else
 261                 printk(KERN_ERR "Err: "
 262                                 "can't find device node 'fsl,fpga-pixis'\n");
 263
 264         printk("MPC86xx HPCD board from Freescale Semiconductor\n");
 265 }
 266
 267 /*
 268  * Called very early, device-tree isn't unflattened
 269  */
 270 static int __init mpc86xx_hpcd_probe(void)
 271 {
 272         unsigned long root = of_get_flat_dt_root();
 273
 274         if (of_flat_dt_is_compatible(root, "fsl,MPC8610HPCD"))
 275                 return 1;       /* Looks good */
 276
 277         return 0;
 278 }
 279
 280 static long __init mpc86xx_time_init(void)
 281 {
 282         unsigned int temp;
 283
 284         /* Set the time base to zero */
 285         mtspr(SPRN_TBWL, 0);
 286         mtspr(SPRN_TBWU, 0);
 287
 288         temp = mfspr(SPRN_HID0);
 289         temp |= HID0_TBEN;
 290         mtspr(SPRN_HID0, temp);
 291         asm volatile("isync");
 292
 293         return 0;
 294 }
 295
 296 define_machine(mpc86xx_hpcd) {
 297         .name                   = "MPC86xx HPCD",
 298         .probe                  = mpc86xx_hpcd_probe,
 299         .setup_arch             = mpc86xx_hpcd_setup_arch,
 300         .init_IRQ               = mpc86xx_init_irq,
 301         .get_irq                = mpic_get_irq,
 302         .restart                = fsl_rstcr_restart,
 303         .time_init              = mpc86xx_time_init,
 304         .calibrate_decr         = generic_calibrate_decr,
 305         .progress               = udbg_progress,
 306         .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
 307 };