[POWERPC] Add new interrupt mapping core and change platforms to use it
[deliverable/linux.git] / arch / powerpc / platforms / maple / setup.c
1 /*
2 * Maple (970 eval board) setup code
3 *
4 * (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org),
5 * IBM Corp.
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
11 *
12 */
13
14 #undef DEBUG
15
16 #include <linux/init.h>
17 #include <linux/errno.h>
18 #include <linux/sched.h>
19 #include <linux/kernel.h>
20 #include <linux/mm.h>
21 #include <linux/stddef.h>
22 #include <linux/unistd.h>
23 #include <linux/ptrace.h>
24 #include <linux/slab.h>
25 #include <linux/user.h>
26 #include <linux/a.out.h>
27 #include <linux/tty.h>
28 #include <linux/string.h>
29 #include <linux/delay.h>
30 #include <linux/ioport.h>
31 #include <linux/major.h>
32 #include <linux/initrd.h>
33 #include <linux/vt_kern.h>
34 #include <linux/console.h>
35 #include <linux/ide.h>
36 #include <linux/pci.h>
37 #include <linux/adb.h>
38 #include <linux/cuda.h>
39 #include <linux/pmu.h>
40 #include <linux/irq.h>
41 #include <linux/seq_file.h>
42 #include <linux/root_dev.h>
43 #include <linux/serial.h>
44 #include <linux/smp.h>
45
46 #include <asm/processor.h>
47 #include <asm/sections.h>
48 #include <asm/prom.h>
49 #include <asm/system.h>
50 #include <asm/pgtable.h>
51 #include <asm/bitops.h>
52 #include <asm/io.h>
53 #include <asm/kexec.h>
54 #include <asm/pci-bridge.h>
55 #include <asm/iommu.h>
56 #include <asm/machdep.h>
57 #include <asm/dma.h>
58 #include <asm/cputable.h>
59 #include <asm/time.h>
60 #include <asm/of_device.h>
61 #include <asm/lmb.h>
62 #include <asm/mpic.h>
63 #include <asm/udbg.h>
64
65 #include "maple.h"
66
67 #ifdef DEBUG
68 #define DBG(fmt...) udbg_printf(fmt)
69 #else
70 #define DBG(fmt...)
71 #endif
72
73 static unsigned long maple_find_nvram_base(void)
74 {
75 struct device_node *rtcs;
76 unsigned long result = 0;
77
78 /* find NVRAM device */
79 rtcs = of_find_compatible_node(NULL, "nvram", "AMD8111");
80 if (rtcs) {
81 struct resource r;
82 if (of_address_to_resource(rtcs, 0, &r)) {
83 printk(KERN_EMERG "Maple: Unable to translate NVRAM"
84 " address\n");
85 goto bail;
86 }
87 if (!(r.flags & IORESOURCE_IO)) {
88 printk(KERN_EMERG "Maple: NVRAM address isn't PIO!\n");
89 goto bail;
90 }
91 result = r.start;
92 } else
93 printk(KERN_EMERG "Maple: Unable to find NVRAM\n");
94 bail:
95 of_node_put(rtcs);
96 return result;
97 }
98
99 static void maple_restart(char *cmd)
100 {
101 unsigned int maple_nvram_base;
102 unsigned int maple_nvram_offset;
103 unsigned int maple_nvram_command;
104 struct device_node *sp;
105
106 maple_nvram_base = maple_find_nvram_base();
107 if (maple_nvram_base == 0)
108 goto fail;
109
110 /* find service processor device */
111 sp = of_find_node_by_name(NULL, "service-processor");
112 if (!sp) {
113 printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
114 goto fail;
115 }
116 maple_nvram_offset = *(unsigned int*) get_property(sp,
117 "restart-addr", NULL);
118 maple_nvram_command = *(unsigned int*) get_property(sp,
119 "restart-value", NULL);
120 of_node_put(sp);
121
122 /* send command */
123 outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset);
124 for (;;) ;
125 fail:
126 printk(KERN_EMERG "Maple: Manual Restart Required\n");
127 }
128
129 static void maple_power_off(void)
130 {
131 unsigned int maple_nvram_base;
132 unsigned int maple_nvram_offset;
133 unsigned int maple_nvram_command;
134 struct device_node *sp;
135
136 maple_nvram_base = maple_find_nvram_base();
137 if (maple_nvram_base == 0)
138 goto fail;
139
140 /* find service processor device */
141 sp = of_find_node_by_name(NULL, "service-processor");
142 if (!sp) {
143 printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
144 goto fail;
145 }
146 maple_nvram_offset = *(unsigned int*) get_property(sp,
147 "power-off-addr", NULL);
148 maple_nvram_command = *(unsigned int*) get_property(sp,
149 "power-off-value", NULL);
150 of_node_put(sp);
151
152 /* send command */
153 outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset);
154 for (;;) ;
155 fail:
156 printk(KERN_EMERG "Maple: Manual Power-Down Required\n");
157 }
158
159 static void maple_halt(void)
160 {
161 maple_power_off();
162 }
163
164 #ifdef CONFIG_SMP
165 struct smp_ops_t maple_smp_ops = {
166 .probe = smp_mpic_probe,
167 .message_pass = smp_mpic_message_pass,
168 .kick_cpu = smp_generic_kick_cpu,
169 .setup_cpu = smp_mpic_setup_cpu,
170 .give_timebase = smp_generic_give_timebase,
171 .take_timebase = smp_generic_take_timebase,
172 };
173 #endif /* CONFIG_SMP */
174
175 void __init maple_setup_arch(void)
176 {
177 /* init to some ~sane value until calibrate_delay() runs */
178 loops_per_jiffy = 50000000;
179
180 /* Setup SMP callback */
181 #ifdef CONFIG_SMP
182 smp_ops = &maple_smp_ops;
183 #endif
184 /* Lookup PCI hosts */
185 maple_pci_init();
186
187 #ifdef CONFIG_DUMMY_CONSOLE
188 conswitchp = &dummy_con;
189 #endif
190
191 printk(KERN_DEBUG "Using native/NAP idle loop\n");
192 }
193
194 /*
195 * Early initialization.
196 */
197 static void __init maple_init_early(void)
198 {
199 DBG(" -> maple_init_early\n");
200
201 iommu_init_early_dart();
202
203 DBG(" <- maple_init_early\n");
204 }
205
206 /*
207 * This is almost identical to pSeries and CHRP. We need to make that
208 * code generic at one point, with appropriate bits in the device-tree to
209 * identify the presence of an HT APIC
210 */
211 static void __init maple_init_IRQ(void)
212 {
213 struct device_node *root, *np, *mpic_node = NULL;
214 unsigned int *opprop;
215 unsigned long openpic_addr = 0;
216 int naddr, n, i, opplen, has_isus = 0;
217 struct mpic *mpic;
218 unsigned int flags = MPIC_PRIMARY;
219
220 /* Locate MPIC in the device-tree. Note that there is a bug
221 * in Maple device-tree where the type of the controller is
222 * open-pic and not interrupt-controller
223 */
224 for_each_node_by_type(np, "open-pic") {
225 mpic_node = np;
226 break;
227 }
228 if (mpic_node == NULL) {
229 printk(KERN_ERR
230 "Failed to locate the MPIC interrupt controller\n");
231 return;
232 }
233
234 /* Find address list in /platform-open-pic */
235 root = of_find_node_by_path("/");
236 naddr = prom_n_addr_cells(root);
237 opprop = (unsigned int *) get_property(root, "platform-open-pic",
238 &opplen);
239 if (opprop != 0) {
240 openpic_addr = of_read_number(opprop, naddr);
241 has_isus = (opplen > naddr);
242 printk(KERN_DEBUG "OpenPIC addr: %lx, has ISUs: %d\n",
243 openpic_addr, has_isus);
244 }
245 of_node_put(root);
246
247 BUG_ON(openpic_addr == 0);
248
249 /* Check for a big endian MPIC */
250 if (get_property(np, "big-endian", NULL) != NULL)
251 flags |= MPIC_BIG_ENDIAN;
252
253 /* XXX Maple specific bits */
254 flags |= MPIC_BROKEN_U3 | MPIC_WANTS_RESET;
255
256 /* Setup the openpic driver. More device-tree junks, we hard code no
257 * ISUs for now. I'll have to revisit some stuffs with the folks doing
258 * the firmware for those
259 */
260 mpic = mpic_alloc(mpic_node, openpic_addr, flags,
261 /*has_isus ? 16 :*/ 0, 0, " MPIC ");
262 BUG_ON(mpic == NULL);
263
264 /* Add ISUs */
265 opplen /= sizeof(u32);
266 for (n = 0, i = naddr; i < opplen; i += naddr, n++) {
267 unsigned long isuaddr = of_read_number(opprop + i, naddr);
268 mpic_assign_isu(mpic, n, isuaddr);
269 }
270
271 /* All ISUs are setup, complete initialization */
272 mpic_init(mpic);
273 ppc_md.get_irq = mpic_get_irq;
274 of_node_put(mpic_node);
275 of_node_put(root);
276 }
277
278 static void __init maple_progress(char *s, unsigned short hex)
279 {
280 printk("*** %04x : %s\n", hex, s ? s : "");
281 }
282
283
284 /*
285 * Called very early, MMU is off, device-tree isn't unflattened
286 */
287 static int __init maple_probe(void)
288 {
289 unsigned long root = of_get_flat_dt_root();
290
291 if (!of_flat_dt_is_compatible(root, "Momentum,Maple") &&
292 !of_flat_dt_is_compatible(root, "Momentum,Apache"))
293 return 0;
294 /*
295 * On U3, the DART (iommu) must be allocated now since it
296 * has an impact on htab_initialize (due to the large page it
297 * occupies having to be broken up so the DART itself is not
298 * part of the cacheable linar mapping
299 */
300 alloc_dart_table();
301
302 hpte_init_native();
303
304 return 1;
305 }
306
307 define_machine(maple_md) {
308 .name = "Maple",
309 .probe = maple_probe,
310 .setup_arch = maple_setup_arch,
311 .init_early = maple_init_early,
312 .init_IRQ = maple_init_IRQ,
313 .pcibios_fixup = maple_pcibios_fixup,
314 .pci_get_legacy_ide_irq = maple_pci_get_legacy_ide_irq,
315 .restart = maple_restart,
316 .power_off = maple_power_off,
317 .halt = maple_halt,
318 .get_boot_time = maple_get_boot_time,
319 .set_rtc_time = maple_set_rtc_time,
320 .get_rtc_time = maple_get_rtc_time,
321 .calibrate_decr = generic_calibrate_decr,
322 .progress = maple_progress,
323 .power_save = power4_idle,
324 #ifdef CONFIG_KEXEC
325 .machine_kexec = default_machine_kexec,
326 .machine_kexec_prepare = default_machine_kexec_prepare,
327 .machine_crash_shutdown = default_machine_crash_shutdown,
328 #endif
329 };
This page took 0.049902 seconds and 5 git commands to generate.