3 * Common boot and setup code.
5 * Copyright (C) 2001 PPC64 Team, IBM Corp
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
15 #include <linux/config.h>
16 #include <linux/module.h>
17 #include <linux/string.h>
18 #include <linux/sched.h>
19 #include <linux/init.h>
20 #include <linux/kernel.h>
21 #include <linux/reboot.h>
22 #include <linux/delay.h>
23 #include <linux/initrd.h>
24 #include <linux/ide.h>
25 #include <linux/seq_file.h>
26 #include <linux/ioport.h>
27 #include <linux/console.h>
28 #include <linux/version.h>
29 #include <linux/tty.h>
30 #include <linux/root_dev.h>
31 #include <linux/notifier.h>
32 #include <linux/cpu.h>
33 #include <linux/unistd.h>
34 #include <linux/serial.h>
35 #include <linux/serial_8250.h>
38 #include <asm/processor.h>
39 #include <asm/pgtable.h>
40 #include <asm/bootinfo.h>
43 #include <asm/machdep.h>
45 #include <asm/ppcdebug.h>
47 #include <asm/cputable.h>
48 #include <asm/sections.h>
49 #include <asm/btext.h>
50 #include <asm/nvram.h>
51 #include <asm/setup.h>
52 #include <asm/system.h>
54 #include <asm/iommu.h>
55 #include <asm/serial.h>
56 #include <asm/cache.h>
60 #include <asm/iSeries/ItLpNaca.h>
63 #define DBG(fmt...) udbg_printf(fmt)
69 * Here are some early debugging facilities. You can enable one
70 * but your kernel will not boot on anything else if you do so
73 /* This one is for use on LPAR machines that support an HVC console
76 extern void udbg_init_debug_lpar(void);
77 /* This one is for use on Apple G5 machines
79 extern void udbg_init_pmac_realmode(void);
80 /* That's RTAS panel debug */
81 extern void call_rtas_display_status_delay(unsigned char c
);
82 /* Here's maple real mode debug */
83 extern void udbg_init_maple_realmode(void);
85 #define EARLY_DEBUG_INIT() do {} while(0)
88 #define EARLY_DEBUG_INIT() udbg_init_debug_lpar()
89 #define EARLY_DEBUG_INIT() udbg_init_maple_realmode()
90 #define EARLY_DEBUG_INIT() udbg_init_pmac_realmode()
91 #define EARLY_DEBUG_INIT() \
92 do { ppc_md.udbg_putc = call_rtas_display_status_delay; } while(0)
95 /* extern void *stab; */
96 extern unsigned long klimit
;
98 extern void mm_init_ppc64(void);
99 extern void stab_initialize(unsigned long stab
);
100 extern void htab_initialize(void);
101 extern void early_init_devtree(void *flat_dt
);
102 extern void unflatten_device_tree(void);
104 extern void smp_release_cpus(void);
108 int boot_cpuid_phys
= 0;
111 u64 ppc64_debug_switch
;
113 struct ppc64_caches ppc64_caches
;
114 EXPORT_SYMBOL_GPL(ppc64_caches
);
117 * These are used in binfmt_elf.c to put aux entries on the stack
118 * for each elf executable being started.
124 /* The main machine-dep calls structure
126 struct machdep_calls ppc_md
;
127 EXPORT_SYMBOL(ppc_md
);
129 #ifdef CONFIG_MAGIC_SYSRQ
130 unsigned long SYSRQ_KEY
;
131 #endif /* CONFIG_MAGIC_SYSRQ */
134 static int ppc64_panic_event(struct notifier_block
*, unsigned long, void *);
135 static struct notifier_block ppc64_panic_block
= {
136 .notifier_call
= ppc64_panic_event
,
137 .priority
= INT_MIN
/* may not return; must be done last */
141 * Perhaps we can put the pmac screen_info[] here
142 * on pmac as well so we don't need the ifdef's.
143 * Until we get multiple-console support in here
145 * Maybe tie it to serial consoles, since this is really what
146 * these processors use on existing boards. -- Dan
148 struct screen_info screen_info
= {
151 .orig_video_cols
= 80,
152 .orig_video_lines
= 25,
153 .orig_video_isVGA
= 1,
154 .orig_video_points
= 16
158 * Initialize the PPCDBG state. Called before relocation has been enabled.
160 void __init
ppcdbg_initialize(void)
162 ppc64_debug_switch
= PPC_DEBUG_DEFAULT
; /* | PPCDBG_BUSWALK | */
163 /* PPCDBG_PHBINIT | PPCDBG_MM | PPCDBG_MMINIT | PPCDBG_TCEINIT | PPCDBG_TCE */;
167 * Early boot console based on udbg
169 static struct console udbg_console
= {
171 .write
= udbg_console_write
,
172 .flags
= CON_PRINTBUFFER
,
175 static int early_console_initialized
;
177 void __init
disable_early_printk(void)
179 if (!early_console_initialized
)
181 unregister_console(&udbg_console
);
182 early_console_initialized
= 0;
185 #if defined(CONFIG_PPC_MULTIPLATFORM) && defined(CONFIG_SMP)
187 static int smt_enabled_cmdline
;
189 /* Look for ibm,smt-enabled OF option */
190 static void check_smt_enabled(void)
192 struct device_node
*dn
;
195 /* Allow the command line to overrule the OF option */
196 if (smt_enabled_cmdline
)
199 dn
= of_find_node_by_path("/options");
202 smt_option
= (char *)get_property(dn
, "ibm,smt-enabled", NULL
);
205 if (!strcmp(smt_option
, "on"))
206 smt_enabled_at_boot
= 1;
207 else if (!strcmp(smt_option
, "off"))
208 smt_enabled_at_boot
= 0;
213 /* Look for smt-enabled= cmdline option */
214 static int __init
early_smt_enabled(char *p
)
216 smt_enabled_cmdline
= 1;
221 if (!strcmp(p
, "on") || !strcmp(p
, "1"))
222 smt_enabled_at_boot
= 1;
223 else if (!strcmp(p
, "off") || !strcmp(p
, "0"))
224 smt_enabled_at_boot
= 0;
228 early_param("smt-enabled", early_smt_enabled
);
231 * setup_cpu_maps - initialize the following cpu maps:
236 * Having the possible map set up early allows us to restrict allocations
237 * of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
239 * We do not initialize the online map here; cpus set their own bits in
240 * cpu_online_map as they come up.
242 * This function is valid only for Open Firmware systems. finish_device_tree
243 * must be called before using this.
245 * While we're here, we may as well set the "physical" cpu ids in the paca.
247 static void __init
setup_cpu_maps(void)
249 struct device_node
*dn
= NULL
;
255 while ((dn
= of_find_node_by_type(dn
, "cpu")) && cpu
< NR_CPUS
) {
257 int j
, len
= sizeof(u32
), nthreads
;
259 intserv
= (u32
*)get_property(dn
, "ibm,ppc-interrupt-server#s",
262 intserv
= (u32
*)get_property(dn
, "reg", NULL
);
264 nthreads
= len
/ sizeof(u32
);
266 for (j
= 0; j
< nthreads
&& cpu
< NR_CPUS
; j
++) {
267 cpu_set(cpu
, cpu_present_map
);
268 set_hard_smp_processor_id(cpu
, intserv
[j
]);
270 if (intserv
[j
] == boot_cpuid_phys
)
272 cpu_set(cpu
, cpu_possible_map
);
277 /* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that
278 * boot cpu is logical 0.
280 if (boot_cpuid_phys
!= get_hard_smp_processor_id(0)) {
282 tmp
= get_hard_smp_processor_id(0);
283 set_hard_smp_processor_id(0, boot_cpuid_phys
);
284 set_hard_smp_processor_id(swap_cpuid
, tmp
);
288 * On pSeries LPAR, we need to know how many cpus
289 * could possibly be added to this partition.
291 if (systemcfg
->platform
== PLATFORM_PSERIES_LPAR
&&
292 (dn
= of_find_node_by_path("/rtas"))) {
293 int num_addr_cell
, num_size_cell
, maxcpus
;
296 num_addr_cell
= prom_n_addr_cells(dn
);
297 num_size_cell
= prom_n_size_cells(dn
);
299 ireg
= (unsigned int *)
300 get_property(dn
, "ibm,lrdr-capacity", NULL
);
305 maxcpus
= ireg
[num_addr_cell
+ num_size_cell
];
307 /* Double maxcpus for processors which have SMT capability */
308 if (cpu_has_feature(CPU_FTR_SMT
))
311 if (maxcpus
> NR_CPUS
) {
313 "Partition configured for %d cpus, "
314 "operating system maximum is %d.\n",
318 printk(KERN_INFO
"Partition configured for %d cpus.\n",
321 for (cpu
= 0; cpu
< maxcpus
; cpu
++)
322 cpu_set(cpu
, cpu_possible_map
);
328 * Do the sibling map; assume only two threads per processor.
331 cpu_set(cpu
, cpu_sibling_map
[cpu
]);
332 if (cpu_has_feature(CPU_FTR_SMT
))
333 cpu_set(cpu
^ 0x1, cpu_sibling_map
[cpu
]);
336 systemcfg
->processorCount
= num_present_cpus();
338 #endif /* defined(CONFIG_PPC_MULTIPLATFORM) && defined(CONFIG_SMP) */
341 #ifdef CONFIG_PPC_MULTIPLATFORM
343 extern struct machdep_calls pSeries_md
;
344 extern struct machdep_calls pmac_md
;
345 extern struct machdep_calls maple_md
;
346 extern struct machdep_calls bpa_md
;
348 /* Ultimately, stuff them in an elf section like initcalls... */
349 static struct machdep_calls __initdata
*machines
[] = {
350 #ifdef CONFIG_PPC_PSERIES
352 #endif /* CONFIG_PPC_PSERIES */
353 #ifdef CONFIG_PPC_PMAC
355 #endif /* CONFIG_PPC_PMAC */
356 #ifdef CONFIG_PPC_MAPLE
358 #endif /* CONFIG_PPC_MAPLE */
359 #ifdef CONFIG_PPC_BPA
366 * Early initialization entry point. This is called by head.S
367 * with MMU translation disabled. We rely on the "feature" of
368 * the CPU that ignores the top 2 bits of the address in real
369 * mode so we can access kernel globals normally provided we
370 * only toy with things in the RMO region. From here, we do
371 * some early parsing of the device-tree to setup out LMB
372 * data structures, and allocate & initialize the hash table
373 * and segment tables so we can start running with translation
376 * It is this function which will call the probe() callback of
377 * the various platform types and copy the matching one to the
378 * global ppc_md structure. Your platform can eventually do
379 * some very early initializations from the probe() routine, but
380 * this is not recommended, be very careful as, for example, the
381 * device-tree is not accessible via normal means at this point.
384 void __init
early_setup(unsigned long dt_ptr
)
386 struct paca_struct
*lpaca
= get_paca();
387 static struct machdep_calls
**mach
;
390 * Enable early debugging if any specified (see top of
395 DBG(" -> early_setup()\n");
398 * Fill the default DBG level (do we want to keep
399 * that old mecanism around forever ?)
404 * Do early initializations using the flattened device
405 * tree, like retreiving the physical memory map or
406 * calculating/retreiving the hash table size
408 early_init_devtree(__va(dt_ptr
));
411 * Iterate all ppc_md structures until we find the proper
412 * one for the current machine type
414 DBG("Probing machine type for platform %x...\n",
415 systemcfg
->platform
);
417 for (mach
= machines
; *mach
; mach
++) {
418 if ((*mach
)->probe(systemcfg
->platform
))
421 /* What can we do if we didn't find ? */
423 DBG("No suitable machine found !\n");
428 /* our udbg callbacks got overriden by the above, let's put them
429 * back in. Ultimately, I want those things to be split from the
434 DBG("Found, Initializing memory management...\n");
437 * Initialize stab / SLB management
439 stab_initialize(lpaca
->stab_real
);
442 * Initialize the MMU Hash table and create the linear mapping
447 DBG(" <- early_setup()\n");
452 * Initialize some remaining members of the ppc64_caches and systemcfg structures
453 * (at least until we get rid of them completely). This is mostly some
454 * cache informations about the CPU that will be used by cache flush
455 * routines and/or provided to userland
457 static void __init
initialize_cache_info(void)
459 struct device_node
*np
;
460 unsigned long num_cpus
= 0;
462 DBG(" -> initialize_cache_info()\n");
464 for (np
= NULL
; (np
= of_find_node_by_type(np
, "cpu"));) {
467 /* We're assuming *all* of the CPUs have the same
468 * d-cache and i-cache sizes... -Peter
471 if ( num_cpus
== 1 ) {
476 /* Then read cache informations */
477 if (systemcfg
->platform
== PLATFORM_POWERMAC
) {
478 dc
= "d-cache-block-size";
479 ic
= "i-cache-block-size";
481 dc
= "d-cache-line-size";
482 ic
= "i-cache-line-size";
486 lsize
= cur_cpu_spec
->dcache_bsize
;
487 sizep
= (u32
*)get_property(np
, "d-cache-size", NULL
);
490 lsizep
= (u32
*) get_property(np
, dc
, NULL
);
493 if (sizep
== 0 || lsizep
== 0)
494 DBG("Argh, can't find dcache properties ! "
495 "sizep: %p, lsizep: %p\n", sizep
, lsizep
);
497 systemcfg
->dcache_size
= ppc64_caches
.dsize
= size
;
498 systemcfg
->dcache_line_size
=
499 ppc64_caches
.dline_size
= lsize
;
500 ppc64_caches
.log_dline_size
= __ilog2(lsize
);
501 ppc64_caches
.dlines_per_page
= PAGE_SIZE
/ lsize
;
504 lsize
= cur_cpu_spec
->icache_bsize
;
505 sizep
= (u32
*)get_property(np
, "i-cache-size", NULL
);
508 lsizep
= (u32
*)get_property(np
, ic
, NULL
);
511 if (sizep
== 0 || lsizep
== 0)
512 DBG("Argh, can't find icache properties ! "
513 "sizep: %p, lsizep: %p\n", sizep
, lsizep
);
515 systemcfg
->icache_size
= ppc64_caches
.isize
= size
;
516 systemcfg
->icache_line_size
=
517 ppc64_caches
.iline_size
= lsize
;
518 ppc64_caches
.log_iline_size
= __ilog2(lsize
);
519 ppc64_caches
.ilines_per_page
= PAGE_SIZE
/ lsize
;
523 /* Add an eye catcher and the systemcfg layout version number */
524 strcpy(systemcfg
->eye_catcher
, "SYSTEMCFG:PPC64");
525 systemcfg
->version
.major
= SYSTEMCFG_MAJOR
;
526 systemcfg
->version
.minor
= SYSTEMCFG_MINOR
;
527 systemcfg
->processor
= mfspr(SPRN_PVR
);
529 DBG(" <- initialize_cache_info()\n");
532 static void __init
check_for_initrd(void)
534 #ifdef CONFIG_BLK_DEV_INITRD
537 DBG(" -> check_for_initrd()\n");
540 prop
= (u64
*)get_property(of_chosen
,
541 "linux,initrd-start", NULL
);
543 initrd_start
= (unsigned long)__va(*prop
);
544 prop
= (u64
*)get_property(of_chosen
,
545 "linux,initrd-end", NULL
);
547 initrd_end
= (unsigned long)__va(*prop
);
548 initrd_below_start_ok
= 1;
554 /* If we were passed an initrd, set the ROOT_DEV properly if the values
555 * look sensible. If not, clear initrd reference.
557 if (initrd_start
>= KERNELBASE
&& initrd_end
>= KERNELBASE
&&
558 initrd_end
> initrd_start
)
559 ROOT_DEV
= Root_RAM0
;
561 initrd_start
= initrd_end
= 0;
564 printk("Found initrd at 0x%lx:0x%lx\n", initrd_start
, initrd_end
);
566 DBG(" <- check_for_initrd()\n");
567 #endif /* CONFIG_BLK_DEV_INITRD */
570 #endif /* CONFIG_PPC_MULTIPLATFORM */
573 * Do some initial setup of the system. The parameters are those which
574 * were passed in from the bootloader.
576 void __init
setup_system(void)
578 DBG(" -> setup_system()\n");
580 #ifdef CONFIG_PPC_ISERIES
581 /* pSeries systems are identified in prom.c via OF. */
582 if (itLpNaca
.xLparInstalled
== 1)
583 systemcfg
->platform
= PLATFORM_ISERIES_LPAR
;
586 #else /* CONFIG_PPC_ISERIES */
589 * Unflatten the device-tree passed by prom_init or kexec
591 unflatten_device_tree();
594 * Fill the ppc64_caches & systemcfg structures with informations
595 * retreived from the device-tree. Need to be called before
596 * finish_device_tree() since the later requires some of the
597 * informations filled up here to properly parse the interrupt
599 * It also sets up the cache line sizes which allows to call
600 * routines like flush_icache_range (used by the hash init
603 initialize_cache_info();
605 #ifdef CONFIG_PPC_RTAS
607 * Initialize RTAS if available
610 #endif /* CONFIG_PPC_RTAS */
613 * Check if we have an initrd provided via the device-tree
618 * Do some platform specific early initializations, that includes
619 * setting up the hash table pointers. It also sets up some interrupt-mapping
620 * related options that will be used by finish_device_tree()
625 * "Finish" the device-tree, that is do the actual parsing of
626 * some of the properties like the interrupt map
628 finish_device_tree();
633 #ifdef CONFIG_XMON_DEFAULT
637 * Register early console
639 early_console_initialized
= 1;
640 register_console(&udbg_console
);
642 /* Save unparsed command line copy for /proc/cmdline */
643 strlcpy(saved_command_line
, cmd_line
, COMMAND_LINE_SIZE
);
646 #endif /* !CONFIG_PPC_ISERIES */
648 #if defined(CONFIG_SMP) && !defined(CONFIG_PPC_ISERIES)
650 * iSeries has already initialized the cpu maps at this point.
654 /* Release secondary cpus out of their spinloops at 0x60 now that
655 * we can map physical -> logical CPU ids
658 #endif /* defined(CONFIG_SMP) && !defined(CONFIG_PPC_ISERIES) */
660 printk("Starting Linux PPC64 %s\n", UTS_RELEASE
);
662 printk("-----------------------------------------------------\n");
663 printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size
);
664 printk("ppc64_debug_switch = 0x%lx\n", ppc64_debug_switch
);
665 printk("ppc64_interrupt_controller = 0x%ld\n", ppc64_interrupt_controller
);
666 printk("systemcfg = 0x%p\n", systemcfg
);
667 printk("systemcfg->platform = 0x%x\n", systemcfg
->platform
);
668 printk("systemcfg->processorCount = 0x%lx\n", systemcfg
->processorCount
);
669 printk("systemcfg->physicalMemorySize = 0x%lx\n", systemcfg
->physicalMemorySize
);
670 printk("ppc64_caches.dcache_line_size = 0x%x\n",
671 ppc64_caches
.dline_size
);
672 printk("ppc64_caches.icache_line_size = 0x%x\n",
673 ppc64_caches
.iline_size
);
674 printk("htab_address = 0x%p\n", htab_address
);
675 printk("htab_hash_mask = 0x%lx\n", htab_hash_mask
);
676 printk("-----------------------------------------------------\n");
680 DBG(" <- setup_system()\n");
683 /* also used by kexec */
684 void machine_shutdown(void)
686 if (ppc_md
.nvram_sync
)
690 void machine_restart(char *cmd
)
697 printk(KERN_EMERG
"System Halted, OK to turn off power\n");
702 void machine_power_off(void)
709 printk(KERN_EMERG
"System Halted, OK to turn off power\n");
713 /* Used by the G5 thermal driver */
714 EXPORT_SYMBOL_GPL(machine_power_off
);
716 void machine_halt(void)
723 printk(KERN_EMERG
"System Halted, OK to turn off power\n");
728 static int ppc64_panic_event(struct notifier_block
*this,
729 unsigned long event
, void *ptr
)
731 ppc_md
.panic((char *)ptr
); /* May not return */
737 DEFINE_PER_CPU(unsigned int, pvr
);
740 static int show_cpuinfo(struct seq_file
*m
, void *v
)
742 unsigned long cpu_id
= (unsigned long)v
- 1;
747 if (cpu_id
== NR_CPUS
) {
748 seq_printf(m
, "timebase\t: %lu\n", ppc_tb_freq
);
750 if (ppc_md
.get_cpuinfo
!= NULL
)
751 ppc_md
.get_cpuinfo(m
);
756 /* We only show online cpus: disable preempt (overzealous, I
757 * knew) to prevent cpu going down. */
759 if (!cpu_online(cpu_id
)) {
765 pvr
= per_cpu(pvr
, cpu_id
);
767 pvr
= mfspr(SPRN_PVR
);
769 maj
= (pvr
>> 8) & 0xFF;
772 seq_printf(m
, "processor\t: %lu\n", cpu_id
);
773 seq_printf(m
, "cpu\t\t: ");
775 if (cur_cpu_spec
->pvr_mask
)
776 seq_printf(m
, "%s", cur_cpu_spec
->cpu_name
);
778 seq_printf(m
, "unknown (%08x)", pvr
);
780 #ifdef CONFIG_ALTIVEC
781 if (cpu_has_feature(CPU_FTR_ALTIVEC
))
782 seq_printf(m
, ", altivec supported");
783 #endif /* CONFIG_ALTIVEC */
788 * Assume here that all clock rates are the same in a
789 * smp system. -- Cort
791 seq_printf(m
, "clock\t\t: %lu.%06luMHz\n", ppc_proc_freq
/ 1000000,
792 ppc_proc_freq
% 1000000);
794 seq_printf(m
, "revision\t: %hd.%hd\n\n", maj
, min
);
800 static void *c_start(struct seq_file
*m
, loff_t
*pos
)
802 return *pos
<= NR_CPUS
? (void *)((*pos
)+1) : NULL
;
804 static void *c_next(struct seq_file
*m
, void *v
, loff_t
*pos
)
807 return c_start(m
, pos
);
809 static void c_stop(struct seq_file
*m
, void *v
)
812 struct seq_operations cpuinfo_op
= {
816 .show
= show_cpuinfo
,
820 * These three variables are used to save values passed to us by prom_init()
821 * via the device tree. The TCE variables are needed because with a memory_limit
822 * in force we may need to explicitly map the TCE are at the top of RAM.
824 unsigned long memory_limit
;
825 unsigned long tce_alloc_start
;
826 unsigned long tce_alloc_end
;
828 #ifdef CONFIG_PPC_ISERIES
830 * On iSeries we just parse the mem=X option from the command line.
831 * On pSeries it's a bit more complicated, see prom_init_mem()
833 static int __init
early_parsemem(char *p
)
838 memory_limit
= ALIGN(memparse(p
, &p
), PAGE_SIZE
);
842 early_param("mem", early_parsemem
);
843 #endif /* CONFIG_PPC_ISERIES */
845 #ifdef CONFIG_PPC_MULTIPLATFORM
846 static int __init
set_preferred_console(void)
848 struct device_node
*prom_stdout
= NULL
;
853 DBG(" -> set_preferred_console()\n");
855 /* The user has requested a console so this is already set up. */
856 if (strstr(saved_command_line
, "console=")) {
857 DBG(" console was specified !\n");
862 DBG(" of_chosen is NULL !\n");
865 /* We are getting a weird phandle from OF ... */
866 /* ... So use the full path instead */
867 name
= (char *)get_property(of_chosen
, "linux,stdout-path", NULL
);
869 DBG(" no linux,stdout-path !\n");
872 prom_stdout
= of_find_node_by_path(name
);
874 DBG(" can't find stdout package %s !\n", name
);
877 DBG("stdout is %s\n", prom_stdout
->full_name
);
879 name
= (char *)get_property(prom_stdout
, "name", NULL
);
881 DBG(" stdout package has no name !\n");
884 spd
= (u32
*)get_property(prom_stdout
, "current-speed", NULL
);
888 #ifdef CONFIG_SERIAL_8250_CONSOLE
889 else if (strcmp(name
, "serial") == 0) {
891 u32
*reg
= (u32
*)get_property(prom_stdout
, "reg", &i
);
907 /* We dont recognise the serial port */
912 #endif /* CONFIG_SERIAL_8250_CONSOLE */
913 #ifdef CONFIG_PPC_PSERIES
914 else if (strcmp(name
, "vty") == 0) {
915 u32
*reg
= (u32
*)get_property(prom_stdout
, "reg", NULL
);
916 char *compat
= (char *)get_property(prom_stdout
, "compatible", NULL
);
918 if (reg
&& compat
&& (strcmp(compat
, "hvterm-protocol") == 0)) {
919 /* Host Virtual Serial Interface */
931 of_node_put(prom_stdout
);
932 DBG("Found hvsi console at offset %d\n", offset
);
933 return add_preferred_console("hvsi", offset
, NULL
);
935 /* pSeries LPAR virtual console */
936 of_node_put(prom_stdout
);
937 DBG("Found hvc console\n");
938 return add_preferred_console("hvc", 0, NULL
);
941 #endif /* CONFIG_PPC_PSERIES */
942 #ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
943 else if (strcmp(name
, "ch-a") == 0)
945 else if (strcmp(name
, "ch-b") == 0)
947 #endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
950 of_node_put(prom_stdout
);
952 DBG("Found serial console at ttyS%d\n", offset
);
955 static char __initdata opt
[16];
956 sprintf(opt
, "%d", *spd
);
957 return add_preferred_console("ttyS", offset
, opt
);
959 return add_preferred_console("ttyS", offset
, NULL
);
962 DBG("No preferred console found !\n");
963 of_node_put(prom_stdout
);
966 console_initcall(set_preferred_console
);
967 #endif /* CONFIG_PPC_MULTIPLATFORM */
969 #ifdef CONFIG_IRQSTACKS
970 static void __init
irqstack_early_init(void)
975 * interrupt stacks must be under 256MB, we cannot afford to take
976 * SLB misses on them.
979 softirq_ctx
[i
] = (struct thread_info
*)__va(lmb_alloc_base(THREAD_SIZE
,
980 THREAD_SIZE
, 0x10000000));
981 hardirq_ctx
[i
] = (struct thread_info
*)__va(lmb_alloc_base(THREAD_SIZE
,
982 THREAD_SIZE
, 0x10000000));
986 #define irqstack_early_init()
990 * Stack space used when we detect a bad kernel stack pointer, and
991 * early in SMP boots before relocation is enabled.
993 static void __init
emergency_stack_init(void)
999 * Emergency stacks must be under 256MB, we cannot afford to take
1000 * SLB misses on them. The ABI also requires them to be 128-byte
1003 * Since we use these as temporary stacks during secondary CPU
1004 * bringup, we need to get at them in real mode. This means they
1005 * must also be within the RMO region.
1007 limit
= min(0x10000000UL
, lmb
.rmo_size
);
1010 paca
[i
].emergency_sp
= __va(lmb_alloc_base(PAGE_SIZE
, 128,
1011 limit
)) + PAGE_SIZE
;
1015 * Called from setup_arch to initialize the bitmap of available
1016 * syscalls in the systemcfg page
1018 void __init
setup_syscall_map(void)
1020 unsigned int i
, count64
= 0, count32
= 0;
1021 extern unsigned long *sys_call_table
;
1022 extern unsigned long *sys_call_table32
;
1023 extern unsigned long sys_ni_syscall
;
1026 for (i
= 0; i
< __NR_syscalls
; i
++) {
1027 if (sys_call_table
[i
] == sys_ni_syscall
)
1030 systemcfg
->syscall_map_64
[i
>> 5] |= 0x80000000UL
>> (i
& 0x1f);
1032 for (i
= 0; i
< __NR_syscalls
; i
++) {
1033 if (sys_call_table32
[i
] == sys_ni_syscall
)
1036 systemcfg
->syscall_map_32
[i
>> 5] |= 0x80000000UL
>> (i
& 0x1f);
1038 printk(KERN_INFO
"Syscall map setup, %d 32 bits and %d 64 bits syscalls\n",
1043 * Called into from start_kernel, after lock_kernel has been called.
1044 * Initializes bootmem, which is unsed to manage page allocation until
1045 * mem_init is called.
1047 void __init
setup_arch(char **cmdline_p
)
1049 extern void do_init_bootmem(void);
1051 ppc64_boot_msg(0x12, "Setup Arch");
1053 *cmdline_p
= cmd_line
;
1056 * Set cache line size based on type of cpu as a default.
1057 * Systems with OF can look in the properties on the cpu node(s)
1058 * for a possibly more accurate value.
1060 dcache_bsize
= ppc64_caches
.dline_size
;
1061 icache_bsize
= ppc64_caches
.iline_size
;
1063 /* reboot on panic */
1064 panic_timeout
= 180;
1067 notifier_chain_register(&panic_notifier_list
, &ppc64_panic_block
);
1069 init_mm
.start_code
= PAGE_OFFSET
;
1070 init_mm
.end_code
= (unsigned long) _etext
;
1071 init_mm
.end_data
= (unsigned long) _edata
;
1072 init_mm
.brk
= klimit
;
1074 irqstack_early_init();
1075 emergency_stack_init();
1079 /* set up the bootmem stuff with available memory */
1083 /* initialize the syscall map in systemcfg */
1084 setup_syscall_map();
1086 ppc_md
.setup_arch();
1088 /* Use the default idle loop if the platform hasn't provided one. */
1089 if (NULL
== ppc_md
.idle_loop
) {
1090 ppc_md
.idle_loop
= default_idle
;
1091 printk(KERN_INFO
"Using default idle loop\n");
1095 ppc64_boot_msg(0x15, "Setup Done");
1099 /* ToDo: do something useful if ppc_md is not yet setup. */
1100 #define PPC64_LINUX_FUNCTION 0x0f000000
1101 #define PPC64_IPL_MESSAGE 0xc0000000
1102 #define PPC64_TERM_MESSAGE 0xb0000000
1103 #define PPC64_ATTN_MESSAGE 0xa0000000
1104 #define PPC64_DUMP_MESSAGE 0xd0000000
1106 static void ppc64_do_msg(unsigned int src
, const char *msg
)
1108 if (ppc_md
.progress
) {
1111 sprintf(buf
, "%08X\n", src
);
1112 ppc_md
.progress(buf
, 0);
1113 snprintf(buf
, 128, "%s", msg
);
1114 ppc_md
.progress(buf
, 0);
1118 /* Print a boot progress message. */
1119 void ppc64_boot_msg(unsigned int src
, const char *msg
)
1121 ppc64_do_msg(PPC64_LINUX_FUNCTION
|PPC64_IPL_MESSAGE
|src
, msg
);
1122 printk("[boot]%04x %s\n", src
, msg
);
1125 /* Print a termination message (print only -- does not stop the kernel) */
1126 void ppc64_terminate_msg(unsigned int src
, const char *msg
)
1128 ppc64_do_msg(PPC64_LINUX_FUNCTION
|PPC64_TERM_MESSAGE
|src
, msg
);
1129 printk("[terminate]%04x %s\n", src
, msg
);
1132 /* Print something that needs attention (device error, etc) */
1133 void ppc64_attention_msg(unsigned int src
, const char *msg
)
1135 ppc64_do_msg(PPC64_LINUX_FUNCTION
|PPC64_ATTN_MESSAGE
|src
, msg
);
1136 printk("[attention]%04x %s\n", src
, msg
);
1139 /* Print a dump progress message. */
1140 void ppc64_dump_msg(unsigned int src
, const char *msg
)
1142 ppc64_do_msg(PPC64_LINUX_FUNCTION
|PPC64_DUMP_MESSAGE
|src
, msg
);
1143 printk("[dump]%04x %s\n", src
, msg
);
1146 /* This should only be called on processor 0 during calibrate decr */
1147 void __init
setup_default_decr(void)
1149 struct paca_struct
*lpaca
= get_paca();
1151 lpaca
->default_decr
= tb_ticks_per_jiffy
;
1152 lpaca
->next_jiffy_update_tb
= get_tb() + tb_ticks_per_jiffy
;
1155 #ifndef CONFIG_PPC_ISERIES
1157 * This function can be used by platforms to "find" legacy serial ports.
1158 * It works for "serial" nodes under an "isa" node, and will try to
1159 * respect the "ibm,aix-loc" property if any. It works with up to 8
1163 #define MAX_LEGACY_SERIAL_PORTS 8
1164 static struct plat_serial8250_port serial_ports
[MAX_LEGACY_SERIAL_PORTS
+1];
1165 static unsigned int old_serial_count
;
1167 void __init
generic_find_legacy_serial_ports(u64
*physport
,
1168 unsigned int *default_speed
)
1170 struct device_node
*np
;
1173 struct isa_reg_property
{
1178 struct pci_reg_property
{
1179 struct pci_address addr
;
1184 DBG(" -> generic_find_legacy_serial_port()\n");
1190 np
= of_find_node_by_path("/");
1194 /* First fill our array */
1195 for (np
= NULL
; (np
= of_find_node_by_type(np
, "serial"));) {
1196 struct device_node
*isa
, *pci
;
1197 struct isa_reg_property
*reg
;
1198 unsigned long phys_size
, addr_size
, io_base
;
1200 u32
*interrupts
, *clk
, *spd
;
1202 int index
, rlen
, rentsize
;
1204 /* Ok, first check if it's under an "isa" parent */
1205 isa
= of_get_parent(np
);
1206 if (!isa
|| strcmp(isa
->name
, "isa")) {
1207 DBG("%s: no isa parent found\n", np
->full_name
);
1211 /* Now look for an "ibm,aix-loc" property that gives us ordering
1214 typep
= (char *)get_property(np
, "ibm,aix-loc", NULL
);
1216 /* Get the ISA port number */
1217 reg
= (struct isa_reg_property
*)get_property(np
, "reg", NULL
);
1220 /* We assume the interrupt number isn't translated ... */
1221 interrupts
= (u32
*)get_property(np
, "interrupts", NULL
);
1222 /* get clock freq. if present */
1223 clk
= (u32
*)get_property(np
, "clock-frequency", NULL
);
1224 /* get default speed if present */
1225 spd
= (u32
*)get_property(np
, "current-speed", NULL
);
1226 /* Default to locate at end of array */
1227 index
= old_serial_count
; /* end of the array by default */
1229 /* If we have a location index, then use it */
1230 if (typep
&& *typep
== 'S') {
1231 index
= simple_strtol(typep
+1, NULL
, 0) - 1;
1232 /* if index is out of range, use end of array instead */
1233 if (index
>= MAX_LEGACY_SERIAL_PORTS
)
1234 index
= old_serial_count
;
1235 /* if our index is still out of range, that mean that
1236 * array is full, we could scan for a free slot but that
1237 * make little sense to bother, just skip the port
1239 if (index
>= MAX_LEGACY_SERIAL_PORTS
)
1241 if (index
>= old_serial_count
)
1242 old_serial_count
= index
+ 1;
1243 /* Check if there is a port who already claimed our slot */
1244 if (serial_ports
[index
].iobase
!= 0) {
1245 /* if we still have some room, move it, else override */
1246 if (old_serial_count
< MAX_LEGACY_SERIAL_PORTS
) {
1247 DBG("Moved legacy port %d -> %d\n", index
,
1249 serial_ports
[old_serial_count
++] =
1250 serial_ports
[index
];
1252 DBG("Replacing legacy port %d\n", index
);
1256 if (index
>= MAX_LEGACY_SERIAL_PORTS
)
1258 if (index
>= old_serial_count
)
1259 old_serial_count
= index
+ 1;
1261 /* Now fill the entry */
1262 memset(&serial_ports
[index
], 0, sizeof(struct plat_serial8250_port
));
1263 serial_ports
[index
].uartclk
= clk
? *clk
: BASE_BAUD
* 16;
1264 serial_ports
[index
].iobase
= reg
->address
;
1265 serial_ports
[index
].irq
= interrupts
? interrupts
[0] : 0;
1266 serial_ports
[index
].flags
= ASYNC_BOOT_AUTOCONF
;
1268 DBG("Added legacy port, index: %d, port: %x, irq: %d, clk: %d\n",
1270 serial_ports
[index
].iobase
,
1271 serial_ports
[index
].irq
,
1272 serial_ports
[index
].uartclk
);
1274 /* Get phys address of IO reg for port 1 */
1278 pci
= of_get_parent(isa
);
1280 DBG("%s: no pci parent found\n", np
->full_name
);
1284 rangesp
= (u32
*)get_property(pci
, "ranges", &rlen
);
1285 if (rangesp
== NULL
) {
1291 /* we need the #size-cells of the PCI bridge node itself */
1293 sizeprop
= (u32
*)get_property(pci
, "#size-cells", NULL
);
1294 if (sizeprop
!= NULL
)
1295 phys_size
= *sizeprop
;
1296 /* we need the parent #addr-cells */
1297 addr_size
= prom_n_addr_cells(pci
);
1298 rentsize
= 3 + addr_size
+ phys_size
;
1300 for (;rlen
>= rentsize
; rlen
-= rentsize
,rangesp
+= rentsize
) {
1301 if (((rangesp
[0] >> 24) & 0x3) != 1)
1302 continue; /* not IO space */
1303 io_base
= rangesp
[3];
1305 io_base
= (io_base
<< 32) | rangesp
[4];
1308 *physport
= io_base
+ reg
->address
;
1309 if (default_speed
&& spd
)
1310 *default_speed
= *spd
;
1317 DBG(" <- generic_find_legacy_serial_port()\n");
1320 static struct platform_device serial_device
= {
1321 .name
= "serial8250",
1324 .platform_data
= serial_ports
,
1328 static int __init
serial_dev_init(void)
1330 return platform_device_register(&serial_device
);
1332 arch_initcall(serial_dev_init
);
1334 #endif /* CONFIG_PPC_ISERIES */
1336 int check_legacy_ioport(unsigned long base_port
)
1338 if (ppc_md
.check_legacy_ioport
== NULL
)
1340 return ppc_md
.check_legacy_ioport(base_port
);
1342 EXPORT_SYMBOL(check_legacy_ioport
);
1345 static int __init
early_xmon(char *p
)
1347 /* ensure xmon is enabled */
1349 if (strncmp(p
, "on", 2) == 0)
1351 if (strncmp(p
, "off", 3) == 0)
1353 if (strncmp(p
, "early", 5) != 0)
1361 early_param("xmon", early_xmon
);