arch/s390/kernel/sclp.S

   1 /*
   2  * Mini SCLP driver.
   3  *
   4  * Copyright IBM Corp. 2004, 2009
   5  *
   6  *   Author(s): Peter Oberparleiter <Peter.Oberparleiter@de.ibm.com>,
   7  *              Heiko Carstens <heiko.carstens@de.ibm.com>,
   8  *
   9  */
  10
  11 #include <linux/linkage.h>
  12 #include <asm/irq.h>
  13
  14 LC_EXT_NEW_PSW          = 0x58                  # addr of ext int handler
  15 LC_EXT_NEW_PSW_64       = 0x1b0                 # addr of ext int handler 64 bit
  16 LC_EXT_INT_PARAM        = 0x80                  # addr of ext int parameter
  17 LC_EXT_INT_CODE         = 0x86                  # addr of ext int code
  18 LC_AR_MODE_ID           = 0xa3
  19
  20 #
  21 # Subroutine which waits synchronously until either an external interruption
  22 # or a timeout occurs.
  23 #
  24 # Parameters:
  25 #   R2  = 0 for no timeout, non-zero for timeout in (approximated) seconds
  26 #
  27 # Returns:
  28 #   R2  = 0 on interrupt, 2 on timeout
  29 #   R3  = external interruption parameter if R2=0
  30 #
  31
  32 _sclp_wait_int:
  33         stm     %r6,%r15,24(%r15)               # save registers
  34         basr    %r13,0                          # get base register
  35 .LbaseS1:
  36         ahi     %r15,-96                        # create stack frame
  37         la      %r8,LC_EXT_NEW_PSW              # register int handler
  38         la      %r9,.LextpswS1-.LbaseS1(%r13)
  39         tm      LC_AR_MODE_ID,1
  40         jno     .Lesa1
  41         la      %r8,LC_EXT_NEW_PSW_64           # register int handler 64 bit
  42         la      %r9,.LextpswS1_64-.LbaseS1(%r13)
  43 .Lesa1:
  44         mvc     .LoldpswS1-.LbaseS1(16,%r13),0(%r8)
  45         mvc     0(16,%r8),0(%r9)
  46         epsw    %r6,%r7                         # set current addressing mode
  47         nill    %r6,0x1                         # in new psw (31 or 64 bit mode)
  48         nilh    %r7,0x8000
  49         stm     %r6,%r7,0(%r8)
  50         lhi     %r6,0x0200                      # cr mask for ext int (cr0.54)
  51         ltr     %r2,%r2
  52         jz      .LsetctS1
  53         ahi     %r6,0x0800                      # cr mask for clock int (cr0.52)
  54         stck    .LtimeS1-.LbaseS1(%r13)         # initiate timeout
  55         al      %r2,.LtimeS1-.LbaseS1(%r13)
  56         st      %r2,.LtimeS1-.LbaseS1(%r13)
  57         sckc    .LtimeS1-.LbaseS1(%r13)
  58
  59 .LsetctS1:
  60         stctl   %c0,%c0,.LctlS1-.LbaseS1(%r13)  # enable required interrupts
  61         l       %r0,.LctlS1-.LbaseS1(%r13)
  62         lhi     %r1,~(0x200 | 0x800)            # clear old values
  63         nr      %r1,%r0
  64         or      %r1,%r6                         # set new value
  65         st      %r1,.LctlS1-.LbaseS1(%r13)
  66         lctl    %c0,%c0,.LctlS1-.LbaseS1(%r13)
  67         st      %r0,.LctlS1-.LbaseS1(%r13)
  68         lhi     %r2,2                           # return code for timeout
  69 .LloopS1:
  70         lpsw    .LwaitpswS1-.LbaseS1(%r13)      # wait until interrupt
  71 .LwaitS1:
  72         lh      %r7,LC_EXT_INT_CODE
  73         chi     %r7,EXT_IRQ_CLK_COMP            # timeout?
  74         je      .LtimeoutS1
  75         chi     %r7,EXT_IRQ_SERVICE_SIG         # service int?
  76         jne     .LloopS1
  77         sr      %r2,%r2
  78         l       %r3,LC_EXT_INT_PARAM
  79 .LtimeoutS1:
  80         lctl    %c0,%c0,.LctlS1-.LbaseS1(%r13)  # restore interrupt setting
  81         # restore old handler
  82         mvc     0(16,%r8),.LoldpswS1-.LbaseS1(%r13)
  83         lm      %r6,%r15,120(%r15)              # restore registers
  84         br      %r14                            # return to caller
  85
  86         .align  8
  87 .LoldpswS1:
  88         .long   0, 0, 0, 0                      # old ext int PSW
  89 .LextpswS1:
  90         .long   0x00080000, 0x80000000+.LwaitS1 # PSW to handle ext int
  91 .LextpswS1_64:
  92         .quad   0, .LwaitS1                     # PSW to handle ext int, 64 bit
  93 .LwaitpswS1:
  94         .long   0x010a0000, 0x00000000+.LloopS1 # PSW to wait for ext int
  95 .LtimeS1:
  96         .quad   0                               # current time
  97 .LctlS1:
  98         .long   0                               # CT0 contents
  99
 100 #
 101 # Subroutine to synchronously issue a service call.
 102 #
 103 # Parameters:
 104 #   R2  = command word
 105 #   R3  = sccb address
 106 #
 107 # Returns:
 108 #   R2  = 0 on success, 1 on failure
 109 #   R3  = sccb response code if R2 = 0
 110 #
 111
 112 _sclp_servc:
 113         stm     %r6,%r15,24(%r15)               # save registers
 114         ahi     %r15,-96                        # create stack frame
 115         lr      %r6,%r2                         # save command word
 116         lr      %r7,%r3                         # save sccb address
 117 .LretryS2:
 118         lhi     %r2,1                           # error return code
 119         .insn   rre,0xb2200000,%r6,%r7          # servc
 120         brc     1,.LendS2                       # exit if not operational
 121         brc     8,.LnotbusyS2                   # go on if not busy
 122         sr      %r2,%r2                         # wait until no longer busy
 123         bras    %r14,_sclp_wait_int
 124         j       .LretryS2                       # retry
 125 .LnotbusyS2:
 126         sr      %r2,%r2                         # wait until result
 127         bras    %r14,_sclp_wait_int
 128         sr      %r2,%r2
 129         lh      %r3,6(%r7)
 130 .LendS2:
 131         lm      %r6,%r15,120(%r15)              # restore registers
 132         br      %r14
 133
 134 #
 135 # Subroutine to set up the SCLP interface.
 136 #
 137 # Parameters:
 138 #   R2  = 0 to activate, non-zero to deactivate
 139 #
 140 # Returns:
 141 #   R2  = 0 on success, non-zero on failure
 142 #
 143
 144 _sclp_setup:
 145         stm     %r6,%r15,24(%r15)               # save registers
 146         ahi     %r15,-96                        # create stack frame
 147         basr    %r13,0                          # get base register
 148 .LbaseS3:
 149         l       %r6,.LsccbS0-.LbaseS3(%r13)     # prepare init mask sccb
 150         mvc     0(.LinitendS3-.LinitsccbS3,%r6),.LinitsccbS3-.LbaseS3(%r13)
 151         ltr     %r2,%r2                         # initialization?
 152         jz      .LdoinitS3                      # go ahead
 153         # clear masks
 154         xc      .LinitmaskS3-.LinitsccbS3(8,%r6),.LinitmaskS3-.LinitsccbS3(%r6)
 155 .LdoinitS3:
 156         l       %r2,.LwritemaskS3-.LbaseS3(%r13)# get command word
 157         lr      %r3,%r6                         # get sccb address
 158         bras    %r14,_sclp_servc                # issue service call
 159         ltr     %r2,%r2                         # servc successful?
 160         jnz     .LerrorS3
 161         chi     %r3,0x20                        # write mask successful?
 162         jne     .LerrorS3
 163         # check masks
 164         la      %r2,.LinitmaskS3-.LinitsccbS3(%r6)
 165         l       %r1,0(%r2)                      # receive mask ok?
 166         n       %r1,12(%r2)
 167         cl      %r1,0(%r2)
 168         jne     .LerrorS3
 169         l       %r1,4(%r2)                      # send mask ok?
 170         n       %r1,8(%r2)
 171         cl      %r1,4(%r2)
 172         sr      %r2,%r2
 173         je      .LendS3
 174 .LerrorS3:
 175         lhi     %r2,1                           # error return code
 176 .LendS3:
 177         lm      %r6,%r15,120(%r15)              # restore registers
 178         br      %r14
 179 .LwritemaskS3:
 180         .long   0x00780005                      # SCLP command for write mask
 181 .LinitsccbS3:
 182         .word   .LinitendS3-.LinitsccbS3
 183         .byte   0,0,0,0
 184         .word   0
 185         .word   0
 186         .word   4
 187 .LinitmaskS3:
 188         .long   0x80000000
 189         .long   0x40000000
 190         .long   0
 191         .long   0
 192 .LinitendS3:
 193
 194 #
 195 # Subroutine which prints a given text to the SCLP console.
 196 #
 197 # Parameters:
 198 #   R2  = address of nil-terminated ASCII text
 199 #
 200 # Returns:
 201 #   R2  = 0 on success, 1 on failure
 202 #
 203
 204 _sclp_print:
 205         stm     %r6,%r15,24(%r15)               # save registers
 206         ahi     %r15,-96                        # create stack frame
 207         basr    %r13,0                          # get base register
 208 .LbaseS4:
 209         l       %r8,.LsccbS0-.LbaseS4(%r13)     # prepare write data sccb
 210         mvc     0(.LmtoS4-.LwritesccbS4,%r8),.LwritesccbS4-.LbaseS4(%r13)
 211         la      %r7,.LmtoS4-.LwritesccbS4(%r8)  # current mto addr
 212         sr      %r0,%r0
 213         l       %r10,.Lascebc-.LbaseS4(%r13)    # address of translation table
 214 .LinitmtoS4:
 215         # initialize mto
 216         mvc     0(.LmtoendS4-.LmtoS4,%r7),.LmtoS4-.LbaseS4(%r13)
 217         lhi     %r6,.LmtoendS4-.LmtoS4          # current mto length
 218 .LloopS4:
 219         ic      %r0,0(%r2)                      # get character
 220         ahi     %r2,1
 221         ltr     %r0,%r0                         # end of string?
 222         jz      .LfinalizemtoS4
 223         chi     %r0,0x0a                        # end of line (NL)?
 224         jz      .LfinalizemtoS4
 225         stc     %r0,0(%r6,%r7)                  # copy to mto
 226         la      %r11,0(%r6,%r7)
 227         tr      0(1,%r11),0(%r10)               # translate to EBCDIC
 228         ahi     %r6,1
 229         j       .LloopS4
 230 .LfinalizemtoS4:
 231         sth     %r6,0(%r7)                      # update mto length
 232         lh      %r9,.LmdbS4-.LwritesccbS4(%r8)  # update mdb length
 233         ar      %r9,%r6
 234         sth     %r9,.LmdbS4-.LwritesccbS4(%r8)
 235         lh      %r9,.LevbufS4-.LwritesccbS4(%r8)# update evbuf length
 236         ar      %r9,%r6
 237         sth     %r9,.LevbufS4-.LwritesccbS4(%r8)
 238         lh      %r9,0(%r8)                      # update sccb length
 239         ar      %r9,%r6
 240         sth     %r9,0(%r8)
 241         ar      %r7,%r6                         # update current mto address
 242         ltr     %r0,%r0                         # more characters?
 243         jnz     .LinitmtoS4
 244         l       %r2,.LwritedataS4-.LbaseS4(%r13)# write data
 245         lr      %r3,%r8
 246         bras    %r14,_sclp_servc
 247         ltr     %r2,%r2                         # servc successful?
 248         jnz     .LendS4
 249         chi     %r3,0x20                        # write data successful?
 250         je      .LendS4
 251         lhi     %r2,1                           # error return code
 252 .LendS4:
 253         lm      %r6,%r15,120(%r15)              # restore registers
 254         br      %r14
 255
 256 #
 257 # Function which prints a given text to the SCLP console.
 258 #
 259 # Parameters:
 260 #   R2  = address of nil-terminated ASCII text
 261 #
 262 # Returns:
 263 #   R2  = 0 on success, 1 on failure
 264 #
 265
 266 ENTRY(_sclp_print_early)
 267         stm     %r6,%r15,24(%r15)               # save registers
 268         ahi     %r15,-96                        # create stack frame
 269         tm      LC_AR_MODE_ID,1
 270         jno     .Lesa2
 271         ahi     %r15,-80
 272         stmh    %r6,%r15,96(%r15)               # store upper register halves
 273 .Lesa2:
 274         lr      %r10,%r2                        # save string pointer
 275         lhi     %r2,0
 276         bras    %r14,_sclp_setup                # enable console
 277         ltr     %r2,%r2
 278         jnz     .LendS5
 279         lr      %r2,%r10
 280         bras    %r14,_sclp_print                # print string
 281         ltr     %r2,%r2
 282         jnz     .LendS5
 283         lhi     %r2,1
 284         bras    %r14,_sclp_setup                # disable console
 285 .LendS5:
 286         tm      LC_AR_MODE_ID,1
 287         jno     .Lesa3
 288         lgfr    %r2,%r2                         # sign extend return value
 289         lmh     %r6,%r15,96(%r15)               # restore upper register halves
 290         ahi     %r15,80
 291 .Lesa3:
 292         lm      %r6,%r15,120(%r15)              # restore registers
 293         br      %r14
 294
 295 .LwritedataS4:
 296         .long   0x00760005                      # SCLP command for write data
 297 .LwritesccbS4:
 298         # sccb
 299         .word   .LmtoS4-.LwritesccbS4
 300         .byte   0
 301         .byte   0,0,0
 302         .word   0
 303
 304         # evbuf
 305 .LevbufS4:
 306         .word   .LmtoS4-.LevbufS4
 307         .byte   0x02
 308         .byte   0
 309         .word   0
 310
 311 .LmdbS4:
 312         # mdb
 313         .word   .LmtoS4-.LmdbS4
 314         .word   1
 315         .long   0xd4c4c240
 316         .long   1
 317
 318         # go
 319 .LgoS4:
 320         .word   .LmtoS4-.LgoS4
 321         .word   1
 322         .long   0
 323         .byte   0,0,0,0,0,0,0,0
 324         .byte   0,0,0
 325         .byte   0
 326         .byte   0,0,0,0,0,0,0
 327         .byte   0
 328         .word   0
 329         .byte   0,0,0,0,0,0,0,0,0,0
 330         .byte   0,0,0,0,0,0,0,0
 331         .byte   0,0,0,0,0,0,0,0
 332
 333 .LmtoS4:
 334         .word   .LmtoendS4-.LmtoS4
 335         .word   4
 336         .word   0x1000
 337         .byte   0
 338         .byte   0,0,0
 339 .LmtoendS4:
 340
 341         # Global constants
 342 .LsccbS0:
 343         .long   _sclp_work_area
 344 .Lascebc:
 345         .long   _ascebc
 346
 347 .section .data,"aw",@progbits
 348         .balign 4096
 349 _sclp_work_area:
 350         .fill   4096
 351 .previous