arch/sh/Kconfig

   1 #
   2 # For a description of the syntax of this configuration file,
   3 # see Documentation/kbuild/kconfig-language.txt.
   4 #
   5
   6 mainmenu "Linux/SuperH Kernel Configuration"
   7
   8 config SUPERH
   9         bool
  10         default y
  11         select EMBEDDED
  12         help
  13           The SuperH is a RISC processor targeted for use in embedded systems
  14           and consumer electronics; it was also used in the Sega Dreamcast
  15           gaming console.  The SuperH port has a home page at
  16           <http://www.linux-sh.org/>.
  17
  18 config RWSEM_GENERIC_SPINLOCK
  19         bool
  20         default y
  21
  22 config RWSEM_XCHGADD_ALGORITHM
  23         bool
  24
  25 config GENERIC_BUG
  26         def_bool y
  27         depends on BUG
  28
  29 config GENERIC_FIND_NEXT_BIT
  30         bool
  31         default y
  32
  33 config GENERIC_HWEIGHT
  34         bool
  35         default y
  36
  37 config GENERIC_HARDIRQS
  38         bool
  39         default y
  40
  41 config GENERIC_IRQ_PROBE
  42         bool
  43         default y
  44
  45 config GENERIC_CALIBRATE_DELAY
  46         bool
  47         default y
  48
  49 config GENERIC_IOMAP
  50         bool
  51
  52 config GENERIC_TIME
  53         def_bool n
  54
  55 config GENERIC_CLOCKEVENTS
  56         def_bool n
  57
  58 config SYS_SUPPORTS_PM
  59         bool
  60
  61 config SYS_SUPPORTS_APM_EMULATION
  62         bool
  63         select SYS_SUPPORTS_PM
  64
  65 config SYS_SUPPORTS_SMP
  66         bool
  67
  68 config SYS_SUPPORTS_NUMA
  69         bool
  70
  71 config SYS_SUPPORTS_PCI
  72         bool
  73
  74 config ARCH_MAY_HAVE_PC_FDC
  75         bool
  76
  77 config STACKTRACE_SUPPORT
  78         bool
  79         default y
  80
  81 config LOCKDEP_SUPPORT
  82         bool
  83         default y
  84
  85 config ARCH_HAS_ILOG2_U32
  86         bool
  87         default n
  88
  89 config ARCH_HAS_ILOG2_U64
  90         bool
  91         default n
  92
  93 source "init/Kconfig"
  94
  95 menu "System type"
  96
  97 source "arch/sh/mm/Kconfig"
  98
  99 menu "Processor features"
 100
 101 choice
 102         prompt "Endianess selection"
 103         default CPU_LITTLE_ENDIAN
 104         help
 105           Some SuperH machines can be configured for either little or big
 106           endian byte order. These modes require different kernels.
 107
 108 config CPU_LITTLE_ENDIAN
 109         bool "Little Endian"
 110
 111 config CPU_BIG_ENDIAN
 112         bool "Big Endian"
 113
 114 endchoice
 115
 116 config SH_FPU
 117         bool "FPU support"
 118         depends on CPU_SH4
 119         default y
 120         help
 121           Selecting this option will enable support for SH processors that
 122           have FPU units (ie, SH77xx).
 123
 124           This option must be set in order to enable the FPU.
 125
 126 config SH_FPU_EMU
 127         bool "FPU emulation support"
 128         depends on !SH_FPU && EXPERIMENTAL
 129         default n
 130         help
 131           Selecting this option will enable support for software FPU emulation.
 132           Most SH-3 users will want to say Y here, whereas most SH-4 users will
 133           want to say N.
 134
 135 config SH_DSP
 136         bool "DSP support"
 137         default y if SH4AL_DSP || !CPU_SH4
 138         default n
 139         help
 140           Selecting this option will enable support for SH processors that
 141           have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP).
 142
 143           This option must be set in order to enable the DSP.
 144
 145 config SH_ADC
 146         bool "ADC support"
 147         depends on CPU_SH3
 148         default y
 149         help
 150           Selecting this option will allow the Linux kernel to use SH3 on-chip
 151           ADC module.
 152
 153           If unsure, say N.
 154
 155 config SH_STORE_QUEUES
 156         bool "Support for Store Queues"
 157         depends on CPU_SH4
 158         help
 159           Selecting this option will enable an in-kernel API for manipulating
 160           the store queues integrated in the SH-4 processors.
 161
 162 config SPECULATIVE_EXECUTION
 163         bool "Speculative subroutine return"
 164         depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL
 165         help
 166           This enables support for a speculative instruction fetch for
 167           subroutine return. There are various pitfalls associated with
 168           this, as outlined in the SH7780 hardware manual.
 169
 170           If unsure, say N.
 171
 172 config CPU_HAS_INTEVT
 173         bool
 174
 175 config CPU_HAS_PINT_IRQ
 176         bool
 177
 178 config CPU_HAS_MASKREG_IRQ
 179         bool
 180
 181 config CPU_HAS_INTC2_IRQ
 182         bool
 183
 184 config CPU_HAS_IPR_IRQ
 185         bool
 186
 187 config CPU_HAS_SR_RB
 188         bool "CPU has SR.RB"
 189         depends on CPU_SH3 || CPU_SH4
 190         default y
 191         help
 192           This will enable the use of SR.RB register bank usage. Processors
 193           that are lacking this bit must have another method in place for
 194           accomplishing what is taken care of by the banked registers.
 195
 196           See <file:Documentation/sh/register-banks.txt> for further
 197           information on SR.RB and register banking in the kernel in general.
 198
 199 config CPU_HAS_PTEA
 200         bool
 201
 202 endmenu
 203
 204 menu "Board support"
 205
 206 config SOLUTION_ENGINE
 207         bool
 208
 209 config SH_SOLUTION_ENGINE
 210         bool "SolutionEngine"
 211         select SOLUTION_ENGINE
 212         depends on CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7750
 213         help
 214           Select SolutionEngine if configuring for a Hitachi SH7709
 215           or SH7750 evaluation board.
 216
 217 config SH_7206_SOLUTION_ENGINE
 218         bool "SolutionEngine7206"
 219         select SOLUTION_ENGINE
 220         depends on CPU_SUBTYPE_SH7206
 221         help
 222           Select 7206 SolutionEngine if configuring for a Hitachi SH7206
 223           evaluation board.
 224
 225 config SH_7619_SOLUTION_ENGINE
 226         bool "SolutionEngine7619"
 227         select SOLUTION_ENGINE
 228         depends on CPU_SUBTYPE_SH7619
 229         help
 230           Select 7619 SolutionEngine if configuring for a Hitachi SH7619
 231           evaluation board.
 232
 233 config SH_7722_SOLUTION_ENGINE
 234         bool "SolutionEngine7722"
 235         select SOLUTION_ENGINE
 236         depends on CPU_SUBTYPE_SH7722
 237         help
 238           Select 7722 SolutionEngine if configuring for a Hitachi SH772
 239           evaluation board.
 240
 241 config SH_7751_SOLUTION_ENGINE
 242         bool "SolutionEngine7751"
 243         select SOLUTION_ENGINE
 244         depends on CPU_SUBTYPE_SH7751
 245         help
 246           Select 7751 SolutionEngine if configuring for a Hitachi SH7751
 247           evaluation board.
 248
 249 config SH_7780_SOLUTION_ENGINE
 250         bool "SolutionEngine7780"
 251         select SOLUTION_ENGINE
 252         select SYS_SUPPORTS_PCI
 253         depends on CPU_SUBTYPE_SH7780
 254         help
 255           Select 7780 SolutionEngine if configuring for a Renesas SH7780
 256           evaluation board.
 257
 258 config SH_7300_SOLUTION_ENGINE
 259         bool "SolutionEngine7300"
 260         select SOLUTION_ENGINE
 261         depends on CPU_SUBTYPE_SH7300
 262         help
 263           Select 7300 SolutionEngine if configuring for a Hitachi
 264           SH7300(SH-Mobile V) evaluation board.
 265
 266 config SH_7343_SOLUTION_ENGINE
 267         bool "SolutionEngine7343"
 268         select SOLUTION_ENGINE
 269         depends on CPU_SUBTYPE_SH7343
 270         help
 271           Select 7343 SolutionEngine if configuring for a Hitachi
 272           SH7343 (SH-Mobile 3AS) evaluation board.
 273
 274 config SH_73180_SOLUTION_ENGINE
 275         bool "SolutionEngine73180"
 276         select SOLUTION_ENGINE
 277         depends on CPU_SUBTYPE_SH73180
 278         help
 279           Select 73180 SolutionEngine if configuring for a Hitachi
 280           SH73180(SH-Mobile 3) evaluation board.
 281
 282 config SH_7751_SYSTEMH
 283         bool "SystemH7751R"
 284         depends on CPU_SUBTYPE_SH7751R
 285         help
 286           Select SystemH if you are configuring for a Renesas SystemH
 287           7751R evaluation board.
 288
 289 config SH_HP6XX
 290         bool "HP6XX"
 291         select SYS_SUPPORTS_APM_EMULATION
 292         select HD6446X_SERIES
 293         depends on CPU_SUBTYPE_SH7709
 294         help
 295           Select HP6XX if configuring for a HP jornada HP6xx.
 296           More information (hardware only) at
 297           <http://www.hp.com/jornada/>.
 298
 299 config SH_DREAMCAST
 300         bool "Dreamcast"
 301         select SYS_SUPPORTS_PCI
 302         depends on CPU_SUBTYPE_SH7091
 303         help
 304           Select Dreamcast if configuring for a SEGA Dreamcast.
 305           More information at
 306           <http://www.m17n.org/linux-sh/dreamcast/>.  There is a
 307           Dreamcast project is at <http://linuxdc.sourceforge.net/>.
 308
 309 config SH_MPC1211
 310         bool "Interface MPC1211"
 311         depends on CPU_SUBTYPE_SH7751 && BROKEN
 312         help
 313           CTP/PCI-SH02 is a CPU module computer that is produced
 314           by Interface Corporation.
 315           More information at <http://www.interface.co.jp>
 316
 317 config SH_SH03
 318         bool "Interface CTP/PCI-SH03"
 319         depends on CPU_SUBTYPE_SH7751 && BROKEN
 320         select SYS_SUPPORTS_PCI
 321         help
 322           CTP/PCI-SH03 is a CPU module computer that is produced
 323           by Interface Corporation.
 324           More information at <http://www.interface.co.jp>
 325
 326 config SH_SECUREEDGE5410
 327         bool "SecureEdge5410"
 328         depends on CPU_SUBTYPE_SH7751R
 329         select SYS_SUPPORTS_PCI
 330         help
 331           Select SecureEdge5410 if configuring for a SnapGear SH board.
 332           This includes both the OEM SecureEdge products as well as the
 333           SME product line.
 334
 335 config SH_HS7751RVOIP
 336         bool "HS7751RVOIP"
 337         depends on CPU_SUBTYPE_SH7751R
 338         help
 339           Select HS7751RVOIP if configuring for a Renesas Technology
 340           Sales VoIP board.
 341
 342 config SH_7710VOIPGW
 343         bool "SH7710-VOIP-GW"
 344         depends on CPU_SUBTYPE_SH7710
 345         help
 346           Select this option to build a kernel for the SH7710 based
 347           VOIP GW.
 348
 349 config SH_RTS7751R2D
 350         bool "RTS7751R2D"
 351         depends on CPU_SUBTYPE_SH7751R
 352         select SYS_SUPPORTS_PCI
 353         help
 354           Select RTS7751R2D if configuring for a Renesas Technology
 355           Sales SH-Graphics board.
 356
 357 config SH_HIGHLANDER
 358         bool "Highlander"
 359         depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
 360         select SYS_SUPPORTS_PCI
 361
 362 config SH_EDOSK7705
 363         bool "EDOSK7705"
 364         depends on CPU_SUBTYPE_SH7705
 365
 366 config SH_SH4202_MICRODEV
 367         bool "SH4-202 MicroDev"
 368         depends on CPU_SUBTYPE_SH4_202
 369         help
 370           Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
 371           with an SH4-202 CPU.
 372
 373 config SH_LANDISK
 374         bool "LANDISK"
 375         depends on CPU_SUBTYPE_SH7751R
 376         select SYS_SUPPORTS_PCI
 377         help
 378           I-O DATA DEVICE, INC. "LANDISK Series" support.
 379
 380 config SH_TITAN
 381         bool "TITAN"
 382         depends on CPU_SUBTYPE_SH7751R
 383         select SYS_SUPPORTS_PCI
 384         help
 385           Select Titan if you are configuring for a Nimble Microsystems
 386           NetEngine NP51R.
 387
 388 config SH_SHMIN
 389         bool "SHMIN"
 390         depends on CPU_SUBTYPE_SH7706
 391         help
 392           Select SHMIN if configuring for the SHMIN board.
 393
 394 config SH_LBOX_RE2
 395         bool "L-BOX RE2"
 396         depends on CPU_SUBTYPE_SH7751R
 397         select SYS_SUPPORTS_PCI
 398         help
 399           Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
 400
 401 endmenu
 402
 403 source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
 404 source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
 405 source "arch/sh/boards/renesas/r7780rp/Kconfig"
 406
 407 menu "Timer and clock configuration"
 408
 409 config SH_TMU
 410         bool "TMU timer support"
 411         depends on CPU_SH3 || CPU_SH4
 412         select GENERIC_TIME
 413         select GENERIC_CLOCKEVENTS
 414         default y
 415         help
 416           This enables the use of the TMU as the system timer.
 417
 418 config SH_CMT
 419         bool "CMT timer support"
 420         depends on CPU_SH2
 421         default y
 422         help
 423           This enables the use of the CMT as the system timer.
 424
 425 config SH_MTU2
 426         bool "MTU2 timer support"
 427         depends on CPU_SH2A
 428         default n
 429         help
 430           This enables the use of the MTU2 as the system timer.
 431
 432 config SH_TIMER_IRQ
 433         int
 434         default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
 435         default "86" if CPU_SUBTYPE_SH7619
 436         default "140" if CPU_SUBTYPE_SH7206
 437         default "16"
 438
 439 config SH_PCLK_FREQ
 440         int "Peripheral clock frequency (in Hz)"
 441         default "27000000" if CPU_SUBTYPE_SH73180 || CPU_SUBTYPE_SH7343
 442         default "31250000" if CPU_SUBTYPE_SH7619
 443         default "32000000" if CPU_SUBTYPE_SH7722
 444         default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \
 445                               CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
 446                               CPU_SUBTYPE_SH7206
 447         default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
 448         default "66000000" if CPU_SUBTYPE_SH4_202
 449         default "50000000"
 450         help
 451           This option is used to specify the peripheral clock frequency.
 452           This is necessary for determining the reference clock value on
 453           platforms lacking an RTC.
 454
 455 config SH_CLK_MD
 456         int "CPU Mode Pin Setting"
 457         depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206
 458         default 6 if CPU_SUBTYPE_SH7206
 459         default 5 if CPU_SUBTYPE_SH7619
 460         default 0
 461         help
 462           MD2 - MD0 pin setting.
 463
 464 source "kernel/time/Kconfig"
 465
 466 endmenu
 467
 468 menu "CPU Frequency scaling"
 469
 470 source "drivers/cpufreq/Kconfig"
 471
 472 config SH_CPU_FREQ
 473         tristate "SuperH CPU Frequency driver"
 474         depends on CPU_FREQ
 475         select CPU_FREQ_TABLE
 476         help
 477           This adds the cpufreq driver for SuperH. At present, only
 478           the SH-4 is supported.
 479
 480           For details, take a look at <file:Documentation/cpu-freq>.
 481
 482           If unsure, say N.
 483
 484 endmenu
 485
 486 source "arch/sh/drivers/Kconfig"
 487
 488 endmenu
 489
 490 config ISA_DMA_API
 491         bool
 492         depends on SH_MPC1211
 493         default y
 494
 495 menu "Kernel features"
 496
 497 source kernel/Kconfig.hz
 498
 499 config KEXEC
 500         bool "kexec system call (EXPERIMENTAL)"
 501         depends on EXPERIMENTAL
 502         help
 503           kexec is a system call that implements the ability to shutdown your
 504           current kernel, and to start another kernel.  It is like a reboot
 505           but it is independent of the system firmware.  And like a reboot
 506           you can start any kernel with it, not just Linux.
 507
 508           The name comes from the similarity to the exec system call.
 509
 510           It is an ongoing process to be certain the hardware in a machine
 511           is properly shutdown, so do not be surprised if this code does not
 512           initially work for you.  It may help to enable device hotplugging
 513           support.  As of this writing the exact hardware interface is
 514           strongly in flux, so no good recommendation can be made.
 515
 516 config CRASH_DUMP
 517         bool "kernel crash dumps (EXPERIMENTAL)"
 518         depends on EXPERIMENTAL
 519         help
 520           Generate crash dump after being started by kexec.
 521           This should be normally only set in special crash dump kernels
 522           which are loaded in the main kernel with kexec-tools into
 523           a specially reserved region and then later executed after
 524           a crash by kdump/kexec. The crash dump kernel must be compiled
 525           to a memory address not used by the main kernel using
 526           MEMORY_START.
 527
 528           For more details see Documentation/kdump/kdump.txt
 529
 530 config SMP
 531         bool "Symmetric multi-processing support"
 532         depends on SYS_SUPPORTS_SMP
 533         ---help---
 534           This enables support for systems with more than one CPU. If you have
 535           a system with only one CPU, like most personal computers, say N. If
 536           you have a system with more than one CPU, say Y.
 537
 538           If you say N here, the kernel will run on single and multiprocessor
 539           machines, but will use only one CPU of a multiprocessor machine. If
 540           you say Y here, the kernel will run on many, but not all,
 541           singleprocessor machines. On a singleprocessor machine, the kernel
 542           will run faster if you say N here.
 543
 544           People using multiprocessor machines who say Y here should also say
 545           Y to "Enhanced Real Time Clock Support", below.
 546
 547           See also the <file:Documentation/smp.txt>,
 548           <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available
 549           at <http://www.tldp.org/docs.html#howto>.
 550
 551           If you don't know what to do here, say N.
 552
 553 config NR_CPUS
 554         int "Maximum number of CPUs (2-32)"
 555         range 2 32
 556         depends on SMP
 557         default "2"
 558         help
 559           This allows you to specify the maximum number of CPUs which this
 560           kernel will support.  The maximum supported value is 32 and the
 561           minimum value which makes sense is 2.
 562
 563           This is purely to save memory - each supported CPU adds
 564           approximately eight kilobytes to the kernel image.
 565
 566 source "kernel/Kconfig.preempt"
 567
 568 config NODES_SHIFT
 569         int
 570         default "1"
 571         depends on NEED_MULTIPLE_NODES
 572
 573 endmenu
 574
 575 menu "Boot options"
 576
 577 config ZERO_PAGE_OFFSET
 578         hex "Zero page offset"
 579         default "0x00004000" if SH_MPC1211 || SH_SH03
 580         default "0x00010000" if PAGE_SIZE_64KB
 581         default "0x00002000" if PAGE_SIZE_8KB
 582         default "0x00001000"
 583         help
 584           This sets the default offset of zero page.
 585
 586 config BOOT_LINK_OFFSET
 587         hex "Link address offset for booting"
 588         default "0x00800000"
 589         help
 590           This option allows you to set the link address offset of the zImage.
 591           This can be useful if you are on a board which has a small amount of
 592           memory.
 593
 594 config UBC_WAKEUP
 595         bool "Wakeup UBC on startup"
 596         depends on CPU_SH4
 597         help
 598           Selecting this option will wakeup the User Break Controller (UBC) on
 599           startup. Although the UBC is left in an awake state when the processor
 600           comes up, some boot loaders misbehave by putting the UBC to sleep in a
 601           power saving state, which causes issues with things like ptrace().
 602
 603           If unsure, say N.
 604
 605 config CMDLINE_BOOL
 606         bool "Default bootloader kernel arguments"
 607
 608 config CMDLINE
 609         string "Initial kernel command string"
 610         depends on CMDLINE_BOOL
 611         default "console=ttySC1,115200"
 612
 613 endmenu
 614
 615 menu "Bus options"
 616
 617 # Even on SuperH devices which don't have an ISA bus,
 618 # this variable helps the PCMCIA modules handle
 619 # IRQ requesting properly -- Greg Banks.
 620 #
 621 # Though we're generally not interested in it when
 622 # we're not using PCMCIA, so we make it dependent on
 623 # PCMCIA outright. -- PFM.
 624 config ISA
 625         def_bool y
 626         depends on PCMCIA && HD6446X_SERIES
 627         help
 628           Find out whether you have ISA slots on your motherboard.  ISA is the
 629           name of a bus system, i.e. the way the CPU talks to the other stuff
 630           inside your box.  Other bus systems are PCI, EISA, MicroChannel
 631           (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
 632           newer boards don't support it.  If you have ISA, say Y, otherwise N.
 633
 634 config EISA
 635         bool
 636         ---help---
 637           The Extended Industry Standard Architecture (EISA) bus was
 638           developed as an open alternative to the IBM MicroChannel bus.
 639
 640           The EISA bus provided some of the features of the IBM MicroChannel
 641           bus while maintaining backward compatibility with cards made for
 642           the older ISA bus.  The EISA bus saw limited use between 1988 and
 643           1995 when it was made obsolete by the PCI bus.
 644
 645           Say Y here if you are building a kernel for an EISA-based machine.
 646
 647           Otherwise, say N.
 648
 649 config MCA
 650         bool
 651         help
 652           MicroChannel Architecture is found in some IBM PS/2 machines and
 653           laptops.  It is a bus system similar to PCI or ISA. See
 654           <file:Documentation/mca.txt> (and especially the web page given
 655           there) before attempting to build an MCA bus kernel.
 656
 657 config SBUS
 658         bool
 659
 660 config SUPERHYWAY
 661         tristate "SuperHyway Bus support"
 662         depends on CPU_SUBTYPE_SH4_202
 663
 664 config CF_ENABLER
 665         bool "Compact Flash Enabler support"
 666         depends on SOLUTION_ENGINE || SH_SH03
 667         ---help---
 668           Compact Flash is a small, removable mass storage device introduced
 669           in 1994 originally as a PCMCIA device.  If you say `Y' here, you
 670           compile in support for Compact Flash devices directly connected to
 671           a SuperH processor.  A Compact Flash FAQ is available at
 672           <http://www.compactflash.org/faqs/faq.htm>.
 673
 674           If your board has "Directly Connected" CompactFlash at area 5 or 6,
 675           you may want to enable this option.  Then, you can use CF as
 676           primary IDE drive (only tested for SanDisk).
 677
 678           If in doubt, select 'N'.
 679
 680 choice
 681         prompt "Compact Flash Connection Area"
 682         depends on CF_ENABLER
 683         default CF_AREA6
 684
 685 config CF_AREA5
 686         bool "Area5"
 687         help
 688           If your board has "Directly Connected" CompactFlash, You should
 689           select the area where your CF is connected to.
 690
 691           - "Area5" if CompactFlash is connected to Area 5 (0x14000000)
 692           - "Area6" if it is connected to Area 6 (0x18000000)
 693
 694           "Area6" will work for most boards.
 695
 696 config CF_AREA6
 697         bool "Area6"
 698
 699 endchoice
 700
 701 config CF_BASE_ADDR
 702         hex
 703         depends on CF_ENABLER
 704         default "0xb8000000" if CF_AREA6
 705         default "0xb4000000" if CF_AREA5
 706
 707 source "arch/sh/drivers/pci/Kconfig"
 708
 709 source "drivers/pci/Kconfig"
 710
 711 source "drivers/pcmcia/Kconfig"
 712
 713 source "drivers/pci/hotplug/Kconfig"
 714
 715 endmenu
 716
 717 menu "Executable file formats"
 718
 719 source "fs/Kconfig.binfmt"
 720
 721 endmenu
 722
 723 menu "Power management options (EXPERIMENTAL)"
 724 depends on EXPERIMENTAL && SYS_SUPPORTS_PM
 725
 726 source kernel/power/Kconfig
 727
 728 endmenu
 729
 730 source "net/Kconfig"
 731
 732 source "drivers/Kconfig"
 733
 734 source "fs/Kconfig"
 735
 736 source "arch/sh/oprofile/Kconfig"
 737
 738 source "arch/sh/Kconfig.debug"
 739
 740 source "security/Kconfig"
 741
 742 source "crypto/Kconfig"
 743
 744 source "lib/Kconfig"