arch/sh/boards/Kconfig

   1 menu "Board support"
   2
   3 config SOLUTION_ENGINE
   4         bool
   5
   6 config SH_ALPHA_BOARD
   7         bool
   8
   9 config SH_DEVICE_TREE
  10         bool "Board Described by Device Tree"
  11         select OF
  12         select OF_EARLY_FLATTREE
  13         select CLKSRC_OF
  14         select GENERIC_CALIBRATE_DELAY
  15         help
  16           Select Board Described by Device Tree to build a kernel that
  17           does not hard-code any board-specific knowledge but instead uses
  18           a device tree blob provided by the boot-loader. You must enable
  19           drivers for any hardware you want to use separately. At this
  20           time, only boards based on the open-hardware J-Core processors
  21           have sufficient driver coverage to use this option; do not
  22           select it if you are using original SuperH hardware.
  23
  24 config SH_SOLUTION_ENGINE
  25         bool "SolutionEngine"
  26         select SOLUTION_ENGINE
  27         select CPU_HAS_IPR_IRQ
  28         depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
  29           CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
  30           CPU_SUBTYPE_SH7750R
  31         help
  32           Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
  33           SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
  34
  35 config SH_7206_SOLUTION_ENGINE
  36         bool "SolutionEngine7206"
  37         select SOLUTION_ENGINE
  38         depends on CPU_SUBTYPE_SH7206
  39         help
  40           Select 7206 SolutionEngine if configuring for a Hitachi SH7206
  41           evaluation board.
  42
  43 config SH_7619_SOLUTION_ENGINE
  44         bool "SolutionEngine7619"
  45         select SOLUTION_ENGINE
  46         depends on CPU_SUBTYPE_SH7619
  47         help
  48           Select 7619 SolutionEngine if configuring for a Hitachi SH7619
  49           evaluation board.
  50
  51 config SH_7721_SOLUTION_ENGINE
  52         bool "SolutionEngine7721"
  53         select SOLUTION_ENGINE
  54         depends on CPU_SUBTYPE_SH7721
  55         help
  56           Select 7721 SolutionEngine if configuring for a Hitachi SH7721
  57           evaluation board.
  58
  59 config SH_7722_SOLUTION_ENGINE
  60         bool "SolutionEngine7722"
  61         select SOLUTION_ENGINE
  62         select GENERIC_IRQ_CHIP
  63         select IRQ_DOMAIN
  64         depends on CPU_SUBTYPE_SH7722
  65         help
  66           Select 7722 SolutionEngine if configuring for a Hitachi SH772
  67           evaluation board.
  68
  69 config SH_7724_SOLUTION_ENGINE
  70         bool "SolutionEngine7724"
  71         select SOLUTION_ENGINE
  72         depends on CPU_SUBTYPE_SH7724
  73         select GPIOLIB
  74         select SND_SOC_AK4642 if SND_SIMPLE_CARD
  75         select REGULATOR_FIXED_VOLTAGE if REGULATOR
  76         help
  77           Select 7724 SolutionEngine if configuring for a Hitachi SH7724
  78           evaluation board.
  79
  80 config SH_7751_SOLUTION_ENGINE
  81         bool "SolutionEngine7751"
  82         select SOLUTION_ENGINE
  83         select CPU_HAS_IPR_IRQ
  84         depends on CPU_SUBTYPE_SH7751
  85         help
  86           Select 7751 SolutionEngine if configuring for a Hitachi SH7751
  87           evaluation board.
  88
  89 config SH_7780_SOLUTION_ENGINE
  90         bool "SolutionEngine7780"
  91         select SOLUTION_ENGINE
  92         select SYS_SUPPORTS_PCI
  93         depends on CPU_SUBTYPE_SH7780
  94         help
  95           Select 7780 SolutionEngine if configuring for a Renesas SH7780
  96           evaluation board.
  97
  98 config SH_7343_SOLUTION_ENGINE
  99         bool "SolutionEngine7343"
 100         select SOLUTION_ENGINE
 101         select GENERIC_IRQ_CHIP
 102         select IRQ_DOMAIN
 103         depends on CPU_SUBTYPE_SH7343
 104         help
 105           Select 7343 SolutionEngine if configuring for a Hitachi
 106           SH7343 (SH-Mobile 3AS) evaluation board.
 107
 108 config SH_HP6XX
 109         bool "HP6XX"
 110         select SYS_SUPPORTS_APM_EMULATION
 111         select HD6446X_SERIES
 112         depends on CPU_SUBTYPE_SH7709
 113         help
 114           Select HP6XX if configuring for a HP jornada HP6xx.
 115           More information (hardware only) at
 116           <http://www.hp.com/jornada/>.
 117
 118 config SH_DREAMCAST
 119         bool "Dreamcast"
 120         select SYS_SUPPORTS_PCI
 121         depends on CPU_SUBTYPE_SH7091
 122         help
 123           Select Dreamcast if configuring for a SEGA Dreamcast.
 124           More information at <http://www.linux-sh.org>
 125
 126 config SH_SH03
 127         bool "Interface CTP/PCI-SH03"
 128         depends on CPU_SUBTYPE_SH7751
 129         select CPU_HAS_IPR_IRQ
 130         select SYS_SUPPORTS_PCI
 131         help
 132           CTP/PCI-SH03 is a CPU module computer that is produced
 133           by Interface Corporation.
 134           More information at <http://www.interface.co.jp>
 135
 136 config SH_SECUREEDGE5410
 137         bool "SecureEdge5410"
 138         depends on CPU_SUBTYPE_SH7751R
 139         select CPU_HAS_IPR_IRQ
 140         select SYS_SUPPORTS_PCI
 141         help
 142           Select SecureEdge5410 if configuring for a SnapGear SH board.
 143           This includes both the OEM SecureEdge products as well as the
 144           SME product line.
 145
 146 config SH_RTS7751R2D
 147         bool "RTS7751R2D"
 148         depends on CPU_SUBTYPE_SH7751R
 149         select SYS_SUPPORTS_PCI
 150         select IO_TRAPPED if MMU
 151         help
 152           Select RTS7751R2D if configuring for a Renesas Technology
 153           Sales SH-Graphics board.
 154
 155 config SH_RSK
 156         bool "Renesas Starter Kit"
 157         depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \
 158           CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
 159         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 160         help
 161          Select this option if configuring for any of the RSK+ MCU
 162          evaluation platforms.
 163
 164 config SH_SDK7780
 165         bool "SDK7780R3"
 166         depends on CPU_SUBTYPE_SH7780
 167         select SYS_SUPPORTS_PCI
 168         help
 169           Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
 170           evaluation board.
 171
 172 config SH_SDK7786
 173         bool "SDK7786"
 174         depends on CPU_SUBTYPE_SH7786
 175         select SYS_SUPPORTS_PCI
 176         select NO_IOPORT_MAP if !PCI
 177         select HAVE_SRAM_POOL
 178         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 179         help
 180           Select SDK7786 if configuring for a Renesas Technology Europe
 181           SH7786-65nm board.
 182
 183 config SH_HIGHLANDER
 184         bool "Highlander"
 185         depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
 186         select SYS_SUPPORTS_PCI
 187         select IO_TRAPPED if MMU
 188
 189 config SH_SH7757LCR
 190         bool "SH7757LCR"
 191         depends on CPU_SUBTYPE_SH7757
 192         select GPIOLIB
 193         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 194
 195 config SH_SH7785LCR
 196         bool "SH7785LCR"
 197         depends on CPU_SUBTYPE_SH7785
 198         select SYS_SUPPORTS_PCI
 199
 200 config SH_SH7785LCR_29BIT_PHYSMAPS
 201         bool "SH7785LCR 29bit physmaps"
 202         depends on SH_SH7785LCR && 29BIT
 203         default y
 204         help
 205           This board has 2 physical memory maps. It can be changed with
 206           DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
 207           you can access all on-board device in 29bit address mode.
 208
 209 config SH_SH7785LCR_PT
 210         bool "SH7785LCR prototype board on 32-bit MMU mode"
 211         depends on SH_SH7785LCR && 32BIT
 212         default n
 213         help
 214           If you use prototype board, this option is enabled.
 215
 216 config SH_URQUELL
 217         bool "Urquell"
 218         depends on CPU_SUBTYPE_SH7786
 219         select GPIOLIB
 220         select SYS_SUPPORTS_PCI
 221         select NO_IOPORT_MAP if !PCI
 222
 223 config SH_MIGOR
 224         bool "Migo-R"
 225         depends on CPU_SUBTYPE_SH7722
 226         select GPIOLIB
 227         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 228         help
 229           Select Migo-R if configuring for the SH7722 Migo-R platform
 230           by Renesas System Solutions Asia Pte. Ltd.
 231
 232 config SH_AP325RXA
 233         bool "AP-325RXA"
 234         depends on CPU_SUBTYPE_SH7723
 235         select GPIOLIB
 236         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 237         help
 238           Renesas "AP-325RXA" support.
 239           Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
 240
 241 config SH_KFR2R09
 242         bool "KFR2R09"
 243         depends on CPU_SUBTYPE_SH7724
 244         select GPIOLIB
 245         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 246         help
 247           "Kit For R2R for 2009" support.
 248
 249 config SH_ECOVEC
 250         bool "EcoVec"
 251         depends on CPU_SUBTYPE_SH7724
 252         select GPIOLIB
 253         select SND_SOC_DA7210 if SND_SIMPLE_CARD
 254         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 255         help
 256           Renesas "R0P7724LC0011/21RL (EcoVec)" support.
 257
 258 config SH_SH7763RDP
 259         bool "SH7763RDP"
 260         depends on CPU_SUBTYPE_SH7763
 261         help
 262           Select SH7763RDP if configuring for a Renesas SH7763
 263           evaluation board.
 264
 265 config SH_ESPT
 266         bool "ESPT"
 267         depends on CPU_SUBTYPE_SH7763
 268         help
 269           Select ESPT if configuring for a Renesas SH7763
 270           with gigabit ether evaluation board.
 271
 272 config SH_EDOSK7705
 273         bool "EDOSK7705"
 274         depends on CPU_SUBTYPE_SH7705
 275
 276 config SH_EDOSK7760
 277         bool "EDOSK7760"
 278         depends on CPU_SUBTYPE_SH7760
 279         help
 280           Select if configuring for a Renesas EDOSK7760
 281           evaluation board.
 282
 283 config SH_SH4202_MICRODEV
 284         bool "SH4-202 MicroDev"
 285         depends on CPU_SUBTYPE_SH4_202
 286         help
 287           Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
 288           with an SH4-202 CPU.
 289
 290 config SH_LANDISK
 291         bool "LANDISK"
 292         depends on CPU_SUBTYPE_SH7751R
 293         select SYS_SUPPORTS_PCI
 294         help
 295           I-O DATA DEVICE, INC. "LANDISK Series" support.
 296
 297 config SH_TITAN
 298         bool "TITAN"
 299         depends on CPU_SUBTYPE_SH7751R
 300         select CPU_HAS_IPR_IRQ
 301         select SYS_SUPPORTS_PCI
 302         help
 303           Select Titan if you are configuring for a Nimble Microsystems
 304           NetEngine NP51R.
 305
 306 config SH_SHMIN
 307         bool "SHMIN"
 308         depends on CPU_SUBTYPE_SH7706
 309         select CPU_HAS_IPR_IRQ
 310         help
 311           Select SHMIN if configuring for the SHMIN board.
 312
 313 config SH_LBOX_RE2
 314         bool "L-BOX RE2"
 315         depends on CPU_SUBTYPE_SH7751R
 316         select SYS_SUPPORTS_PCI
 317         help
 318           Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
 319
 320 config SH_X3PROTO
 321         bool "SH-X3 Prototype board"
 322         depends on CPU_SUBTYPE_SHX3
 323         select NO_IOPORT_MAP if !PCI
 324         select IRQ_DOMAIN
 325
 326 config SH_MAGIC_PANEL_R2
 327         bool "Magic Panel R2"
 328         depends on CPU_SUBTYPE_SH7720
 329         select GPIOLIB
 330         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 331         help
 332           Select Magic Panel R2 if configuring for Magic Panel R2.
 333
 334 config SH_CAYMAN
 335         bool "Hitachi Cayman"
 336         depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
 337         select SYS_SUPPORTS_PCI
 338         select ARCH_MIGHT_HAVE_PC_SERIO
 339
 340 config SH_POLARIS
 341         bool "SMSC Polaris"
 342         select CPU_HAS_IPR_IRQ
 343         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 344         depends on CPU_SUBTYPE_SH7709
 345         help
 346           Select if configuring for an SMSC Polaris development board
 347
 348 config SH_SH2007
 349         bool "SH-2007 board"
 350         select NO_IOPORT_MAP
 351         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 352         depends on CPU_SUBTYPE_SH7780
 353         help
 354           SH-2007 is a single-board computer based around SH7780 chip
 355           intended for embedded applications.
 356           It has an Ethernet interface (SMC9118), direct connected
 357           Compact Flash socket, two serial ports and PC-104 bus.
 358           More information at <http://sh2000.sh-linux.org>.
 359
 360 config SH_APSH4A3A
 361         bool "AP-SH4A-3A"
 362         select SH_ALPHA_BOARD
 363         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 364         depends on CPU_SUBTYPE_SH7785
 365         help
 366           Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A.
 367
 368 config SH_APSH4AD0A
 369         bool "AP-SH4AD-0A"
 370         select SH_ALPHA_BOARD
 371         select SYS_SUPPORTS_PCI
 372         select REGULATOR_FIXED_VOLTAGE if REGULATOR
 373         depends on CPU_SUBTYPE_SH7786
 374         help
 375           Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A.
 376
 377 source "arch/sh/boards/mach-r2d/Kconfig"
 378 source "arch/sh/boards/mach-highlander/Kconfig"
 379 source "arch/sh/boards/mach-sdk7780/Kconfig"
 380 source "arch/sh/boards/mach-migor/Kconfig"
 381 source "arch/sh/boards/mach-rsk/Kconfig"
 382
 383 if SH_MAGIC_PANEL_R2
 384
 385 menu "Magic Panel R2 options"
 386
 387 config SH_MAGIC_PANEL_R2_VERSION
 388         int "Magic Panel R2 Version"
 389         default "3"
 390         help
 391           Set the version of the Magic Panel R2
 392
 393 endmenu
 394
 395 endif
 396
 397 endmenu