arch/sh/kernel/time_64.c

   1 /*
   2  * This file is subject to the terms and conditions of the GNU General Public
   3  * License.  See the file "COPYING" in the main directory of this archive
   4  * for more details.
   5  *
   6  * arch/sh64/kernel/time.c
   7  *
   8  * Copyright (C) 2000, 2001  Paolo Alberelli
   9  * Copyright (C) 2003 - 2007  Paul Mundt
  10  * Copyright (C) 2003  Richard Curnow
  11  *
  12  *    Original TMU/RTC code taken from sh version.
  13  *    Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka
  14  *      Some code taken from i386 version.
  15  *      Copyright (C) 1991, 1992, 1995  Linus Torvalds
  16  */
  17 #include <linux/errno.h>
  18 #include <linux/rwsem.h>
  19 #include <linux/sched.h>
  20 #include <linux/kernel.h>
  21 #include <linux/param.h>
  22 #include <linux/string.h>
  23 #include <linux/mm.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/time.h>
  26 #include <linux/delay.h>
  27 #include <linux/init.h>
  28 #include <linux/profile.h>
  29 #include <linux/smp.h>
  30 #include <linux/module.h>
  31 #include <linux/bcd.h>
  32 #include <linux/timex.h>
  33 #include <linux/irq.h>
  34 #include <linux/io.h>
  35 #include <linux/platform_device.h>
  36 #include <asm/cpu/registers.h>   /* required by inline __asm__ stmt. */
  37 #include <asm/cpu/irq.h>
  38 #include <asm/addrspace.h>
  39 #include <asm/processor.h>
  40 #include <asm/uaccess.h>
  41 #include <asm/delay.h>
  42
  43 #define TMU_TOCR_INIT   0x00
  44 #define TMU0_TCR_INIT   0x0020
  45 #define TMU_TSTR_INIT   1
  46 #define TMU_TSTR_OFF    0
  47
  48 /* Real Time Clock */
  49 #define RTC_BLOCK_OFF   0x01040000
  50 #define RTC_BASE        PHYS_PERIPHERAL_BLOCK + RTC_BLOCK_OFF
  51 #define RTC_RCR1_CIE    0x10    /* Carry Interrupt Enable */
  52 #define RTC_RCR1        (rtc_base + 0x38)
  53
  54 /* Clock, Power and Reset Controller */
  55 #define CPRC_BLOCK_OFF  0x01010000
  56 #define CPRC_BASE       PHYS_PERIPHERAL_BLOCK + CPRC_BLOCK_OFF
  57
  58 #define FRQCR           (cprc_base+0x0)
  59 #define WTCSR           (cprc_base+0x0018)
  60 #define STBCR           (cprc_base+0x0030)
  61
  62 /* Time Management Unit */
  63 #define TMU_BLOCK_OFF   0x01020000
  64 #define TMU_BASE        PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF
  65 #define TMU0_BASE       tmu_base + 0x8 + (0xc * 0x0)
  66 #define TMU1_BASE       tmu_base + 0x8 + (0xc * 0x1)
  67 #define TMU2_BASE       tmu_base + 0x8 + (0xc * 0x2)
  68
  69 #define TMU_TOCR        tmu_base+0x0    /* Byte access */
  70 #define TMU_TSTR        tmu_base+0x4    /* Byte access */
  71
  72 #define TMU0_TCOR       TMU0_BASE+0x0   /* Long access */
  73 #define TMU0_TCNT       TMU0_BASE+0x4   /* Long access */
  74 #define TMU0_TCR        TMU0_BASE+0x8   /* Word access */
  75
  76 #define TICK_SIZE (tick_nsec / 1000)
  77
  78 static unsigned long tmu_base, rtc_base;
  79 unsigned long cprc_base;
  80
  81 /* Variables to allow interpolation of time of day to resolution better than a
  82  * jiffy. */
  83
  84 /* This is effectively protected by xtime_lock */
  85 static unsigned long ctc_last_interrupt;
  86 static unsigned long long usecs_per_jiffy = 1000000/HZ; /* Approximation */
  87
  88 #define CTC_JIFFY_SCALE_SHIFT 40
  89
  90 /* 2**CTC_JIFFY_SCALE_SHIFT / ctc_ticks_per_jiffy */
  91 static unsigned long long scaled_recip_ctc_ticks_per_jiffy;
  92
  93 /* Estimate number of microseconds that have elapsed since the last timer tick,
  94    by scaling the delta that has occurred in the CTC register.
  95
  96    WARNING WARNING WARNING : This algorithm relies on the CTC decrementing at
  97    the CPU clock rate.  If the CPU sleeps, the CTC stops counting.  Bear this
  98    in mind if enabling SLEEP_WORKS in process.c.  In that case, this algorithm
  99    probably needs to use TMU.TCNT0 instead.  This will work even if the CPU is
 100    sleeping, though will be coarser.
 101
 102    FIXME : What if usecs_per_tick is moving around too much, e.g. if an adjtime
 103    is running or if the freq or tick arguments of adjtimex are modified after
 104    we have calibrated the scaling factor?  This will result in either a jump at
 105    the end of a tick period, or a wrap backwards at the start of the next one,
 106    if the application is reading the time of day often enough.  I think we
 107    ought to do better than this.  For this reason, usecs_per_jiffy is left
 108    separated out in the calculation below.  This allows some future hook into
 109    the adjtime-related stuff in kernel/timer.c to remove this hazard.
 110
 111 */
 112
 113 static unsigned long usecs_since_tick(void)
 114 {
 115         unsigned long long current_ctc;
 116         long ctc_ticks_since_interrupt;
 117         unsigned long long ull_ctc_ticks_since_interrupt;
 118         unsigned long result;
 119
 120         unsigned long long mul1_out;
 121         unsigned long long mul1_out_high;
 122         unsigned long long mul2_out_low, mul2_out_high;
 123
 124         /* Read CTC register */
 125         asm ("getcon cr62, %0" : "=r" (current_ctc));
 126         /* Note, the CTC counts down on each CPU clock, not up.
 127            Note(2), use long type to get correct wraparound arithmetic when
 128            the counter crosses zero. */
 129         ctc_ticks_since_interrupt = (long) ctc_last_interrupt - (long) current_ctc;
 130         ull_ctc_ticks_since_interrupt = (unsigned long long) ctc_ticks_since_interrupt;
 131
 132         /* Inline assembly to do 32x32x32->64 multiplier */
 133         asm volatile ("mulu.l %1, %2, %0" :
 134              "=r" (mul1_out) :
 135              "r" (ull_ctc_ticks_since_interrupt), "r" (usecs_per_jiffy));
 136
 137         mul1_out_high = mul1_out >> 32;
 138
 139         asm volatile ("mulu.l %1, %2, %0" :
 140              "=r" (mul2_out_low) :
 141              "r" (mul1_out), "r" (scaled_recip_ctc_ticks_per_jiffy));
 142
 143 #if 1
 144         asm volatile ("mulu.l %1, %2, %0" :
 145              "=r" (mul2_out_high) :
 146              "r" (mul1_out_high), "r" (scaled_recip_ctc_ticks_per_jiffy));
 147 #endif
 148
 149         result = (unsigned long) (((mul2_out_high << 32) + mul2_out_low) >> CTC_JIFFY_SCALE_SHIFT);
 150
 151         return result;
 152 }
 153
 154 void do_gettimeofday(struct timeval *tv)
 155 {
 156         unsigned long flags;
 157         unsigned long seq;
 158         unsigned long usec, sec;
 159
 160         do {
 161                 seq = read_seqbegin_irqsave(&xtime_lock, flags);
 162                 usec = usecs_since_tick();
 163                 sec = xtime.tv_sec;
 164                 usec += xtime.tv_nsec / 1000;
 165         } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
 166
 167         while (usec >= 1000000) {
 168                 usec -= 1000000;
 169                 sec++;
 170         }
 171
 172         tv->tv_sec = sec;
 173         tv->tv_usec = usec;
 174 }
 175
 176 int do_settimeofday(struct timespec *tv)
 177 {
 178         time_t wtm_sec, sec = tv->tv_sec;
 179         long wtm_nsec, nsec = tv->tv_nsec;
 180
 181         if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
 182                 return -EINVAL;
 183
 184         write_seqlock_irq(&xtime_lock);
 185         /*
 186          * This is revolting. We need to set "xtime" correctly. However, the
 187          * value in this location is the value at the most recent update of
 188          * wall time.  Discover what correction gettimeofday() would have
 189          * made, and then undo it!
 190          */
 191         nsec -= 1000 * usecs_since_tick();
 192
 193         wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
 194         wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
 195
 196         set_normalized_timespec(&xtime, sec, nsec);
 197         set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 198
 199         ntp_clear();
 200         write_sequnlock_irq(&xtime_lock);
 201         clock_was_set();
 202
 203         return 0;
 204 }
 205 EXPORT_SYMBOL(do_settimeofday);
 206
 207 /* Dummy RTC ops */
 208 static void null_rtc_get_time(struct timespec *tv)
 209 {
 210         tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0);
 211         tv->tv_nsec = 0;
 212 }
 213
 214 static int null_rtc_set_time(const time_t secs)
 215 {
 216         return 0;
 217 }
 218
 219 void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
 220 int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
 221
 222 /* last time the RTC clock got updated */
 223 static long last_rtc_update;
 224
 225 /*
 226  * timer_interrupt() needs to keep up the real-time clock,
 227  * as well as call the "do_timer()" routine every clocktick
 228  */
 229 static inline void do_timer_interrupt(void)
 230 {
 231         unsigned long long current_ctc;
 232         asm ("getcon cr62, %0" : "=r" (current_ctc));
 233         ctc_last_interrupt = (unsigned long) current_ctc;
 234
 235         do_timer(1);
 236 #ifndef CONFIG_SMP
 237         update_process_times(user_mode(get_irq_regs()));
 238 #endif
 239         if (current->pid)
 240                 profile_tick(CPU_PROFILING);
 241
 242 #ifdef CONFIG_HEARTBEAT
 243         if (sh_mv.mv_heartbeat != NULL)
 244                 sh_mv.mv_heartbeat();
 245 #endif
 246
 247         /*
 248          * If we have an externally synchronized Linux clock, then update
 249          * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
 250          * called as close as possible to 500 ms before the new second starts.
 251          */
 252         if (ntp_synced() &&
 253             xtime.tv_sec > last_rtc_update + 660 &&
 254             (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
 255             (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
 256                 if (rtc_sh_set_time(xtime.tv_sec) == 0)
 257                         last_rtc_update = xtime.tv_sec;
 258                 else
 259                         /* do it again in 60 s */
 260                         last_rtc_update = xtime.tv_sec - 600;
 261         }
 262 }
 263
 264 /*
 265  * This is the same as the above, except we _also_ save the current
 266  * Time Stamp Counter value at the time of the timer interrupt, so that
 267  * we later on can estimate the time of day more exactly.
 268  */
 269 static irqreturn_t timer_interrupt(int irq, void *dev_id)
 270 {
 271         unsigned long timer_status;
 272
 273         /* Clear UNF bit */
 274         timer_status = ctrl_inw(TMU0_TCR);
 275         timer_status &= ~0x100;
 276         ctrl_outw(timer_status, TMU0_TCR);
 277
 278         /*
 279          * Here we are in the timer irq handler. We just have irqs locally
 280          * disabled but we don't know if the timer_bh is running on the other
 281          * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
 282          * the irq version of write_lock because as just said we have irq
 283          * locally disabled. -arca
 284          */
 285         write_lock(&xtime_lock);
 286         do_timer_interrupt();
 287         write_unlock(&xtime_lock);
 288
 289         return IRQ_HANDLED;
 290 }
 291
 292
 293 static __init unsigned int get_cpu_hz(void)
 294 {
 295         unsigned int count;
 296         unsigned long __dummy;
 297         unsigned long ctc_val_init, ctc_val;
 298
 299         /*
 300         ** Regardless the toolchain, force the compiler to use the
 301         ** arbitrary register r3 as a clock tick counter.
 302         ** NOTE: r3 must be in accordance with sh64_rtc_interrupt()
 303         */
 304         register unsigned long long  __rtc_irq_flag __asm__ ("r3");
 305
 306         local_irq_enable();
 307         do {} while (ctrl_inb(rtc_base) != 0);
 308         ctrl_outb(RTC_RCR1_CIE, RTC_RCR1); /* Enable carry interrupt */
 309
 310         /*
 311          * r3 is arbitrary. CDC does not support "=z".
 312          */
 313         ctc_val_init = 0xffffffff;
 314         ctc_val = ctc_val_init;
 315
 316         asm volatile("gettr     tr0, %1\n\t"
 317                      "putcon    %0, " __CTC "\n\t"
 318                      "and       %2, r63, %2\n\t"
 319                      "pta       $+4, tr0\n\t"
 320                      "beq/l     %2, r63, tr0\n\t"
 321                      "ptabs     %1, tr0\n\t"
 322                      "getcon    " __CTC ", %0\n\t"
 323                 : "=r"(ctc_val), "=r" (__dummy), "=r" (__rtc_irq_flag)
 324                 : "0" (0));
 325         local_irq_disable();
 326         /*
 327          * SH-3:
 328          * CPU clock = 4 stages * loop
 329          * tst    rm,rm      if id ex
 330          * bt/s   1b            if id ex
 331          * add    #1,rd            if id ex
 332          *                            (if) pipe line stole
 333          * tst    rm,rm                  if id ex
 334          * ....
 335          *
 336          *
 337          * SH-4:
 338          * CPU clock = 6 stages * loop
 339          * I don't know why.
 340          * ....
 341          *
 342          * SH-5:
 343          * Use CTC register to count.  This approach returns the right value
 344          * even if the I-cache is disabled (e.g. whilst debugging.)
 345          *
 346          */
 347
 348         count = ctc_val_init - ctc_val; /* CTC counts down */
 349
 350         /*
 351          * This really is count by the number of clock cycles
 352          * by the ratio between a complete R64CNT
 353          * wrap-around (128) and CUI interrupt being raised (64).
 354          */
 355         return count*2;
 356 #endif
 357 }
 358
 359 static irqreturn_t sh64_rtc_interrupt(int irq, void *dev_id)
 360 {
 361         struct pt_regs *regs = get_irq_regs();
 362
 363         ctrl_outb(0, RTC_RCR1); /* Disable Carry Interrupts */
 364         regs->regs[3] = 1;      /* Using r3 */
 365
 366         return IRQ_HANDLED;
 367 }
 368
 369 static struct irqaction irq0  = {
 370         .handler = timer_interrupt,
 371         .flags = IRQF_DISABLED,
 372         .mask = CPU_MASK_NONE,
 373         .name = "timer",
 374 };
 375 static struct irqaction irq1  = {
 376         .handler = sh64_rtc_interrupt,
 377         .flags = IRQF_DISABLED,
 378         .mask = CPU_MASK_NONE,
 379         .name = "rtc",
 380 };
 381
 382 void __init time_init(void)
 383 {
 384         unsigned int cpu_clock, master_clock, bus_clock, module_clock;
 385         unsigned long interval;
 386         unsigned long frqcr, ifc, pfc;
 387         static int ifc_table[] = { 2, 4, 6, 8, 10, 12, 16, 24 };
 388 #define bfc_table ifc_table     /* Same */
 389 #define pfc_table ifc_table     /* Same */
 390
 391         tmu_base = onchip_remap(TMU_BASE, 1024, "TMU");
 392         if (!tmu_base) {
 393                 panic("Unable to remap TMU\n");
 394         }
 395
 396         rtc_base = onchip_remap(RTC_BASE, 1024, "RTC");
 397         if (!rtc_base) {
 398                 panic("Unable to remap RTC\n");
 399         }
 400
 401         cprc_base = onchip_remap(CPRC_BASE, 1024, "CPRC");
 402         if (!cprc_base) {
 403                 panic("Unable to remap CPRC\n");
 404         }
 405
 406         rtc_sh_get_time(&xtime);
 407
 408         setup_irq(TIMER_IRQ, &irq0);
 409         setup_irq(RTC_IRQ, &irq1);
 410
 411         /* Check how fast it is.. */
 412         cpu_clock = get_cpu_hz();
 413
 414         /* Note careful order of operations to maintain reasonable precision and avoid overflow. */
 415         scaled_recip_ctc_ticks_per_jiffy = ((1ULL << CTC_JIFFY_SCALE_SHIFT) / (unsigned long long)(cpu_clock / HZ));
 416
 417         free_irq(RTC_IRQ, NULL);
 418
 419         printk("CPU clock: %d.%02dMHz\n",
 420                (cpu_clock / 1000000), (cpu_clock % 1000000)/10000);
 421         {
 422                 unsigned short bfc;
 423                 frqcr = ctrl_inl(FRQCR);
 424                 ifc  = ifc_table[(frqcr>> 6) & 0x0007];
 425                 bfc  = bfc_table[(frqcr>> 3) & 0x0007];
 426                 pfc  = pfc_table[(frqcr>> 12) & 0x0007];
 427                 master_clock = cpu_clock * ifc;
 428                 bus_clock = master_clock/bfc;
 429         }
 430
 431         printk("Bus clock: %d.%02dMHz\n",
 432                (bus_clock/1000000), (bus_clock % 1000000)/10000);
 433         module_clock = master_clock/pfc;
 434         printk("Module clock: %d.%02dMHz\n",
 435                (module_clock/1000000), (module_clock % 1000000)/10000);
 436         interval = (module_clock/(HZ*4));
 437
 438         printk("Interval = %ld\n", interval);
 439
 440         current_cpu_data.cpu_clock    = cpu_clock;
 441         current_cpu_data.master_clock = master_clock;
 442         current_cpu_data.bus_clock    = bus_clock;
 443         current_cpu_data.module_clock = module_clock;
 444
 445         /* Start TMU0 */
 446         ctrl_outb(TMU_TSTR_OFF, TMU_TSTR);
 447         ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
 448         ctrl_outw(TMU0_TCR_INIT, TMU0_TCR);
 449         ctrl_outl(interval, TMU0_TCOR);
 450         ctrl_outl(interval, TMU0_TCNT);
 451         ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
 452 }
 453
 454 void enter_deep_standby(void)
 455 {
 456         /* Disable watchdog timer */
 457         ctrl_outl(0xa5000000, WTCSR);
 458         /* Configure deep standby on sleep */
 459         ctrl_outl(0x03, STBCR);
 460
 461 #ifdef CONFIG_SH_ALPHANUMERIC
 462         {
 463                 extern void mach_alphanum(int position, unsigned char value);
 464                 extern void mach_alphanum_brightness(int setting);
 465                 char halted[] = "Halted. ";
 466                 int i;
 467                 mach_alphanum_brightness(6); /* dimmest setting above off */
 468                 for (i=0; i<8; i++) {
 469                         mach_alphanum(i, halted[i]);
 470                 }
 471                 asm __volatile__ ("synco");
 472         }
 473 #endif
 474
 475         asm __volatile__ ("sleep");
 476         asm __volatile__ ("synci");
 477         asm __volatile__ ("nop");
 478         asm __volatile__ ("nop");
 479         asm __volatile__ ("nop");
 480         asm __volatile__ ("nop");
 481         panic("Unexpected wakeup!\n");
 482 }
 483
 484 static struct resource rtc_resources[] = {
 485         [0] = {
 486                 /* RTC base, filled in by rtc_init */
 487                 .flags  = IORESOURCE_IO,
 488         },
 489         [1] = {
 490                 /* Period IRQ */
 491                 .start  = IRQ_PRI,
 492                 .flags  = IORESOURCE_IRQ,
 493         },
 494         [2] = {
 495                 /* Carry IRQ */
 496                 .start  = IRQ_CUI,
 497                 .flags  = IORESOURCE_IRQ,
 498         },
 499         [3] = {
 500                 /* Alarm IRQ */
 501                 .start  = IRQ_ATI,
 502                 .flags  = IORESOURCE_IRQ,
 503         },
 504 };
 505
 506 static struct platform_device rtc_device = {
 507         .name           = "sh-rtc",
 508         .id             = -1,
 509         .num_resources  = ARRAY_SIZE(rtc_resources),
 510         .resource       = rtc_resources,
 511 };
 512
 513 static int __init rtc_init(void)
 514 {
 515         rtc_resources[0].start  = rtc_base;
 516         rtc_resources[0].end    = rtc_resources[0].start + 0x58 - 1;
 517
 518         return platform_device_register(&rtc_device);
 519 }
 520 device_initcall(rtc_init);