Merge branches 'x86/apic', 'x86/cleanups', 'x86/cpufeature', 'x86/crashdump', 'x86...
[deliverable/linux.git] / arch / sparc / kernel / auxio.c
1 /* auxio.c: Probing for the Sparc AUXIO register at boot time.
2 *
3 * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
4 */
5
6 #include <linux/stddef.h>
7 #include <linux/init.h>
8 #include <linux/spinlock.h>
9 #include <linux/of.h>
10 #include <linux/of_device.h>
11 #include <asm/oplib.h>
12 #include <asm/io.h>
13 #include <asm/auxio.h>
14 #include <asm/string.h> /* memset(), Linux has no bzero() */
15
16 /* Probe and map in the Auxiliary I/O register */
17
18 /* auxio_register is not static because it is referenced
19 * in entry.S::floppy_tdone
20 */
21 void __iomem *auxio_register = NULL;
22 static DEFINE_SPINLOCK(auxio_lock);
23
24 void __init auxio_probe(void)
25 {
26 int node, auxio_nd;
27 struct linux_prom_registers auxregs[1];
28 struct resource r;
29
30 switch (sparc_cpu_model) {
31 case sun4d:
32 case sun4:
33 return;
34 default:
35 break;
36 }
37 node = prom_getchild(prom_root_node);
38 auxio_nd = prom_searchsiblings(node, "auxiliary-io");
39 if(!auxio_nd) {
40 node = prom_searchsiblings(node, "obio");
41 node = prom_getchild(node);
42 auxio_nd = prom_searchsiblings(node, "auxio");
43 if(!auxio_nd) {
44 #ifdef CONFIG_PCI
45 /* There may be auxio on Ebus */
46 return;
47 #else
48 if(prom_searchsiblings(node, "leds")) {
49 /* VME chassis sun4m machine, no auxio exists. */
50 return;
51 }
52 prom_printf("Cannot find auxio node, cannot continue...\n");
53 prom_halt();
54 #endif
55 }
56 }
57 if(prom_getproperty(auxio_nd, "reg", (char *) auxregs, sizeof(auxregs)) <= 0)
58 return;
59 prom_apply_obio_ranges(auxregs, 0x1);
60 /* Map the register both read and write */
61 r.flags = auxregs[0].which_io & 0xF;
62 r.start = auxregs[0].phys_addr;
63 r.end = auxregs[0].phys_addr + auxregs[0].reg_size - 1;
64 auxio_register = of_ioremap(&r, 0, auxregs[0].reg_size, "auxio");
65 /* Fix the address on sun4m and sun4c. */
66 if((((unsigned long) auxregs[0].phys_addr) & 3) == 3 ||
67 sparc_cpu_model == sun4c)
68 auxio_register += (3 - ((unsigned long)auxio_register & 3));
69
70 set_auxio(AUXIO_LED, 0);
71 }
72
73 unsigned char get_auxio(void)
74 {
75 if(auxio_register)
76 return sbus_readb(auxio_register);
77 return 0;
78 }
79
80 void set_auxio(unsigned char bits_on, unsigned char bits_off)
81 {
82 unsigned char regval;
83 unsigned long flags;
84 spin_lock_irqsave(&auxio_lock, flags);
85 switch(sparc_cpu_model) {
86 case sun4c:
87 regval = sbus_readb(auxio_register);
88 sbus_writeb(((regval | bits_on) & ~bits_off) | AUXIO_ORMEIN,
89 auxio_register);
90 break;
91 case sun4m:
92 if(!auxio_register)
93 break; /* VME chassis sun4m, no auxio. */
94 regval = sbus_readb(auxio_register);
95 sbus_writeb(((regval | bits_on) & ~bits_off) | AUXIO_ORMEIN4M,
96 auxio_register);
97 break;
98 case sun4d:
99 break;
100 default:
101 panic("Can't set AUXIO register on this machine.");
102 };
103 spin_unlock_irqrestore(&auxio_lock, flags);
104 }
105
106
107 /* sun4m power control register (AUXIO2) */
108
109 volatile unsigned char * auxio_power_register = NULL;
110
111 void __init auxio_power_probe(void)
112 {
113 struct linux_prom_registers regs;
114 int node;
115 struct resource r;
116
117 /* Attempt to find the sun4m power control node. */
118 node = prom_getchild(prom_root_node);
119 node = prom_searchsiblings(node, "obio");
120 node = prom_getchild(node);
121 node = prom_searchsiblings(node, "power");
122 if (node == 0 || node == -1)
123 return;
124
125 /* Map the power control register. */
126 if (prom_getproperty(node, "reg", (char *)&regs, sizeof(regs)) <= 0)
127 return;
128 prom_apply_obio_ranges(&regs, 1);
129 memset(&r, 0, sizeof(r));
130 r.flags = regs.which_io & 0xF;
131 r.start = regs.phys_addr;
132 r.end = regs.phys_addr + regs.reg_size - 1;
133 auxio_power_register = (unsigned char *) of_ioremap(&r, 0,
134 regs.reg_size, "auxpower");
135
136 /* Display a quick message on the console. */
137 if (auxio_power_register)
138 printk(KERN_INFO "Power off control detected.\n");
139 }
This page took 0.037574 seconds and 5 git commands to generate.