sparc64: prepare module_64.c for unification
[deliverable/linux.git] / arch / sparc / kernel / auxio_64.c
1 /* auxio.c: Probing for the Sparc AUXIO register at boot time.
2 *
3 * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
4 *
5 * Refactoring for unified NCR/PCIO support 2002 Eric Brower (ebrower@usa.net)
6 */
7
8 #include <linux/module.h>
9 #include <linux/kernel.h>
10 #include <linux/init.h>
11 #include <linux/ioport.h>
12 #include <linux/of_device.h>
13
14 #include <asm/prom.h>
15 #include <asm/io.h>
16 #include <asm/auxio.h>
17
18 void __iomem *auxio_register = NULL;
19 EXPORT_SYMBOL(auxio_register);
20
21 enum auxio_type {
22 AUXIO_TYPE_NODEV,
23 AUXIO_TYPE_SBUS,
24 AUXIO_TYPE_EBUS
25 };
26
27 static enum auxio_type auxio_devtype = AUXIO_TYPE_NODEV;
28 static DEFINE_SPINLOCK(auxio_lock);
29
30 static void __auxio_rmw(u8 bits_on, u8 bits_off, int ebus)
31 {
32 if (auxio_register) {
33 unsigned long flags;
34 u8 regval, newval;
35
36 spin_lock_irqsave(&auxio_lock, flags);
37
38 regval = (ebus ?
39 (u8) readl(auxio_register) :
40 sbus_readb(auxio_register));
41 newval = regval | bits_on;
42 newval &= ~bits_off;
43 if (!ebus)
44 newval &= ~AUXIO_AUX1_MASK;
45 if (ebus)
46 writel((u32) newval, auxio_register);
47 else
48 sbus_writeb(newval, auxio_register);
49
50 spin_unlock_irqrestore(&auxio_lock, flags);
51 }
52 }
53
54 static void __auxio_set_bit(u8 bit, int on, int ebus)
55 {
56 u8 bits_on = (ebus ? AUXIO_PCIO_LED : AUXIO_AUX1_LED);
57 u8 bits_off = 0;
58
59 if (!on) {
60 u8 tmp = bits_off;
61 bits_off = bits_on;
62 bits_on = tmp;
63 }
64 __auxio_rmw(bits_on, bits_off, ebus);
65 }
66
67 void auxio_set_led(int on)
68 {
69 int ebus = auxio_devtype == AUXIO_TYPE_EBUS;
70 u8 bit;
71
72 bit = (ebus ? AUXIO_PCIO_LED : AUXIO_AUX1_LED);
73 __auxio_set_bit(bit, on, ebus);
74 }
75
76 static void __auxio_sbus_set_lte(int on)
77 {
78 __auxio_set_bit(AUXIO_AUX1_LTE, on, 0);
79 }
80
81 void auxio_set_lte(int on)
82 {
83 switch(auxio_devtype) {
84 case AUXIO_TYPE_SBUS:
85 __auxio_sbus_set_lte(on);
86 break;
87 case AUXIO_TYPE_EBUS:
88 /* FALL-THROUGH */
89 default:
90 break;
91 }
92 }
93
94 static struct of_device_id __initdata auxio_match[] = {
95 {
96 .name = "auxio",
97 },
98 {},
99 };
100
101 MODULE_DEVICE_TABLE(of, auxio_match);
102
103 static int __devinit auxio_probe(struct of_device *dev, const struct of_device_id *match)
104 {
105 struct device_node *dp = dev->node;
106 unsigned long size;
107
108 if (!strcmp(dp->parent->name, "ebus")) {
109 auxio_devtype = AUXIO_TYPE_EBUS;
110 size = sizeof(u32);
111 } else if (!strcmp(dp->parent->name, "sbus")) {
112 auxio_devtype = AUXIO_TYPE_SBUS;
113 size = 1;
114 } else {
115 printk("auxio: Unknown parent bus type [%s]\n",
116 dp->parent->name);
117 return -ENODEV;
118 }
119 auxio_register = of_ioremap(&dev->resource[0], 0, size, "auxio");
120 if (!auxio_register)
121 return -ENODEV;
122
123 printk(KERN_INFO "AUXIO: Found device at %s\n",
124 dp->full_name);
125
126 if (auxio_devtype == AUXIO_TYPE_EBUS)
127 auxio_set_led(AUXIO_LED_ON);
128
129 return 0;
130 }
131
132 static struct of_platform_driver auxio_driver = {
133 .match_table = auxio_match,
134 .probe = auxio_probe,
135 .driver = {
136 .name = "auxio",
137 },
138 };
139
140 static int __init auxio_init(void)
141 {
142 return of_register_driver(&auxio_driver, &of_platform_bus_type);
143 }
144
145 /* Must be after subsys_initcall() so that busses are probed. Must
146 * be before device_initcall() because things like the floppy driver
147 * need to use the AUXIO register.
148 */
149 fs_initcall(auxio_init);
This page took 0.040182 seconds and 5 git commands to generate.