projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge tag 'stable/for-linus-3.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kerne...
[deliverable/linux.git] / arch / sparc / kernel / entry.S
1 /* arch/sparc/kernel/entry.S: Sparc trap low-level entry points.
2 *
3 * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
4 * Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be)
5 * Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx)
6 * Copyright (C) 1996-1999 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
7 * Copyright (C) 1997 Anton Blanchard (anton@progsoc.uts.edu.au)
8 */
9
10 #include <linux/linkage.h>
11 #include <linux/errno.h>
12
13 #include <asm/head.h>
14 #include <asm/asi.h>
15 #include <asm/smp.h>
16 #include <asm/contregs.h>
17 #include <asm/ptrace.h>
18 #include <asm/asm-offsets.h>
19 #include <asm/psr.h>
20 #include <asm/vaddrs.h>
21 #include <asm/page.h>
22 #include <asm/pgtable.h>
23 #include <asm/winmacro.h>
24 #include <asm/signal.h>
25 #include <asm/obio.h>
26 #include <asm/mxcc.h>
27 #include <asm/thread_info.h>
28 #include <asm/param.h>
29 #include <asm/unistd.h>
30
31 #include <asm/asmmacro.h>
32
33 #define curptr g6
34
35 /* These are just handy. */
36 #define _SV save %sp, -STACKFRAME_SZ, %sp
37 #define _RS restore
38
39 #define FLUSH_ALL_KERNEL_WINDOWS \
40 _SV; _SV; _SV; _SV; _SV; _SV; _SV; \
41 _RS; _RS; _RS; _RS; _RS; _RS; _RS;
42
43 .text
44
45 #ifdef CONFIG_KGDB
46 .align 4
47 .globl arch_kgdb_breakpoint
48 .type arch_kgdb_breakpoint,#function
49 arch_kgdb_breakpoint:
50 ta 0x7d
51 retl
52 nop
53 .size arch_kgdb_breakpoint,.-arch_kgdb_breakpoint
54 #endif
55
56 #if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE)
57 .align 4
58 .globl floppy_hardint
59 floppy_hardint:
60 /*
61 * This code cannot touch registers %l0 %l1 and %l2
62 * because SAVE_ALL depends on their values. It depends
63 * on %l3 also, but we regenerate it before a call.
64 * Other registers are:
65 * %l3 -- base address of fdc registers
66 * %l4 -- pdma_vaddr
67 * %l5 -- scratch for ld/st address
68 * %l6 -- pdma_size
69 * %l7 -- scratch [floppy byte, ld/st address, aux. data]
70 */
71
72 /* Do we have work to do? */
73 sethi %hi(doing_pdma), %l7
74 ld [%l7 + %lo(doing_pdma)], %l7
75 cmp %l7, 0
76 be floppy_dosoftint
77 nop
78
79 /* Load fdc register base */
80 sethi %hi(fdc_status), %l3
81 ld [%l3 + %lo(fdc_status)], %l3
82
83 /* Setup register addresses */
84 sethi %hi(pdma_vaddr), %l5 ! transfer buffer
85 ld [%l5 + %lo(pdma_vaddr)], %l4
86 sethi %hi(pdma_size), %l5 ! bytes to go
87 ld [%l5 + %lo(pdma_size)], %l6
88 next_byte:
89 ldub [%l3], %l7
90
91 andcc %l7, 0x80, %g0 ! Does fifo still have data
92 bz floppy_fifo_emptied ! fifo has been emptied...
93 andcc %l7, 0x20, %g0 ! in non-dma mode still?
94 bz floppy_overrun ! nope, overrun
95 andcc %l7, 0x40, %g0 ! 0=write 1=read
96 bz floppy_write
97 sub %l6, 0x1, %l6
98
99 /* Ok, actually read this byte */
100 ldub [%l3 + 1], %l7
101 orcc %g0, %l6, %g0
102 stb %l7, [%l4]
103 bne next_byte
104 add %l4, 0x1, %l4
105
106 b floppy_tdone
107 nop
108
109 floppy_write:
110 /* Ok, actually write this byte */
111 ldub [%l4], %l7
112 orcc %g0, %l6, %g0
113 stb %l7, [%l3 + 1]
114 bne next_byte
115 add %l4, 0x1, %l4
116
117 /* fall through... */
118 floppy_tdone:
119 sethi %hi(pdma_vaddr), %l5
120 st %l4, [%l5 + %lo(pdma_vaddr)]
121 sethi %hi(pdma_size), %l5
122 st %l6, [%l5 + %lo(pdma_size)]
123 /* Flip terminal count pin */
124 set auxio_register, %l7
125 ld [%l7], %l7
126
127 ldub [%l7], %l5
128
129 or %l5, 0xc2, %l5
130 stb %l5, [%l7]
131 andn %l5, 0x02, %l5
132
133 2:
134 /* Kill some time so the bits set */
135 WRITE_PAUSE
136 WRITE_PAUSE
137
138 stb %l5, [%l7]
139
140 /* Prevent recursion */
141 sethi %hi(doing_pdma), %l7
142 b floppy_dosoftint
143 st %g0, [%l7 + %lo(doing_pdma)]
144
145 /* We emptied the FIFO, but we haven't read everything
146 * as of yet. Store the current transfer address and
147 * bytes left to read so we can continue when the next
148 * fast IRQ comes in.
149 */
150 floppy_fifo_emptied:
151 sethi %hi(pdma_vaddr), %l5
152 st %l4, [%l5 + %lo(pdma_vaddr)]
153 sethi %hi(pdma_size), %l7
154 st %l6, [%l7 + %lo(pdma_size)]
155
156 /* Restore condition codes */
157 wr %l0, 0x0, %psr
158 WRITE_PAUSE
159
160 jmp %l1
161 rett %l2
162
163 floppy_overrun:
164 sethi %hi(pdma_vaddr), %l5
165 st %l4, [%l5 + %lo(pdma_vaddr)]
166 sethi %hi(pdma_size), %l5
167 st %l6, [%l5 + %lo(pdma_size)]
168 /* Prevent recursion */
169 sethi %hi(doing_pdma), %l7
170 st %g0, [%l7 + %lo(doing_pdma)]
171
172 /* fall through... */
173 floppy_dosoftint:
174 rd %wim, %l3
175 SAVE_ALL
176
177 /* Set all IRQs off. */
178 or %l0, PSR_PIL, %l4
179 wr %l4, 0x0, %psr
180 WRITE_PAUSE
181 wr %l4, PSR_ET, %psr
182 WRITE_PAUSE
183
184 mov 11, %o0 ! floppy irq level (unused anyway)
185 mov %g0, %o1 ! devid is not used in fast interrupts
186 call sparc_floppy_irq
187 add %sp, STACKFRAME_SZ, %o2 ! struct pt_regs *regs
188
189 RESTORE_ALL
190
191 #endif /* (CONFIG_BLK_DEV_FD) */
192
193 /* Bad trap handler */
194 .globl bad_trap_handler
195 bad_trap_handler:
196 SAVE_ALL
197
198 wr %l0, PSR_ET, %psr
199 WRITE_PAUSE
200
201 add %sp, STACKFRAME_SZ, %o0 ! pt_regs
202 call do_hw_interrupt
203 mov %l7, %o1 ! trap number
204
205 RESTORE_ALL
206
207 /* For now all IRQ's not registered get sent here. handler_irq() will
208 * see if a routine is registered to handle this interrupt and if not
209 * it will say so on the console.
210 */
211
212 .align 4
213 .globl real_irq_entry, patch_handler_irq
214 real_irq_entry:
215 SAVE_ALL
216
217 #ifdef CONFIG_SMP
218 .globl patchme_maybe_smp_msg
219
220 cmp %l7, 11
221 patchme_maybe_smp_msg:
222 bgu maybe_smp4m_msg
223 nop
224 #endif
225
226 real_irq_continue:
227 or %l0, PSR_PIL, %g2
228 wr %g2, 0x0, %psr
229 WRITE_PAUSE
230 wr %g2, PSR_ET, %psr
231 WRITE_PAUSE
232 mov %l7, %o0 ! irq level
233 patch_handler_irq:
234 call handler_irq
235 add %sp, STACKFRAME_SZ, %o1 ! pt_regs ptr
236 or %l0, PSR_PIL, %g2 ! restore PIL after handler_irq
237 wr %g2, PSR_ET, %psr ! keep ET up
238 WRITE_PAUSE
239
240 RESTORE_ALL
241
242 #ifdef CONFIG_SMP
243 /* SMP per-cpu ticker interrupts are handled specially. */
244 smp4m_ticker:
245 bne real_irq_continue+4
246 or %l0, PSR_PIL, %g2
247 wr %g2, 0x0, %psr
248 WRITE_PAUSE
249 wr %g2, PSR_ET, %psr
250 WRITE_PAUSE
251 call smp4m_percpu_timer_interrupt
252 add %sp, STACKFRAME_SZ, %o0
253 wr %l0, PSR_ET, %psr
254 WRITE_PAUSE
255 RESTORE_ALL
256
257 #define GET_PROCESSOR4M_ID(reg) \
258 rd %tbr, %reg; \
259 srl %reg, 12, %reg; \
260 and %reg, 3, %reg;
261
262 /* Here is where we check for possible SMP IPI passed to us
263 * on some level other than 15 which is the NMI and only used
264 * for cross calls. That has a separate entry point below.
265 *
266 * IPIs are sent on Level 12, 13 and 14. See IRQ_IPI_*.
267 */
268 maybe_smp4m_msg:
269 GET_PROCESSOR4M_ID(o3)
270 sethi %hi(sun4m_irq_percpu), %l5
271 sll %o3, 2, %o3
272 or %l5, %lo(sun4m_irq_percpu), %o5
273 sethi %hi(0x70000000), %o2 ! Check all soft-IRQs
274 ld [%o5 + %o3], %o1
275 ld [%o1 + 0x00], %o3 ! sun4m_irq_percpu[cpu]->pending
276 andcc %o3, %o2, %g0
277 be,a smp4m_ticker
278 cmp %l7, 14
279 /* Soft-IRQ IPI */
280 st %o2, [%o1 + 0x04] ! sun4m_irq_percpu[cpu]->clear=0x70000000
281 WRITE_PAUSE
282 ld [%o1 + 0x00], %g0 ! sun4m_irq_percpu[cpu]->pending
283 WRITE_PAUSE
284 or %l0, PSR_PIL, %l4
285 wr %l4, 0x0, %psr
286 WRITE_PAUSE
287 wr %l4, PSR_ET, %psr
288 WRITE_PAUSE
289 srl %o3, 28, %o2 ! shift for simpler checks below
290 maybe_smp4m_msg_check_single:
291 andcc %o2, 0x1, %g0
292 beq,a maybe_smp4m_msg_check_mask
293 andcc %o2, 0x2, %g0
294 call smp_call_function_single_interrupt
295 nop
296 andcc %o2, 0x2, %g0
297 maybe_smp4m_msg_check_mask:
298 beq,a maybe_smp4m_msg_check_resched
299 andcc %o2, 0x4, %g0
300 call smp_call_function_interrupt
301 nop
302 andcc %o2, 0x4, %g0
303 maybe_smp4m_msg_check_resched:
304 /* rescheduling is done in RESTORE_ALL regardless, but incr stats */
305 beq,a maybe_smp4m_msg_out
306 nop
307 call smp_resched_interrupt
308 nop
309 maybe_smp4m_msg_out:
310 RESTORE_ALL
311
312 .align 4
313 .globl linux_trap_ipi15_sun4m
314 linux_trap_ipi15_sun4m:
315 SAVE_ALL
316 sethi %hi(0x80000000), %o2
317 GET_PROCESSOR4M_ID(o0)
318 sethi %hi(sun4m_irq_percpu), %l5
319 or %l5, %lo(sun4m_irq_percpu), %o5
320 sll %o0, 2, %o0
321 ld [%o5 + %o0], %o5
322 ld [%o5 + 0x00], %o3 ! sun4m_irq_percpu[cpu]->pending
323 andcc %o3, %o2, %g0
324 be sun4m_nmi_error ! Must be an NMI async memory error
325 st %o2, [%o5 + 0x04] ! sun4m_irq_percpu[cpu]->clear=0x80000000
326 WRITE_PAUSE
327 ld [%o5 + 0x00], %g0 ! sun4m_irq_percpu[cpu]->pending
328 WRITE_PAUSE
329 or %l0, PSR_PIL, %l4
330 wr %l4, 0x0, %psr
331 WRITE_PAUSE
332 wr %l4, PSR_ET, %psr
333 WRITE_PAUSE
334 call smp4m_cross_call_irq
335 nop
336 b ret_trap_lockless_ipi
337 clr %l6
338
339 .globl smp4d_ticker
340 /* SMP per-cpu ticker interrupts are handled specially. */
341 smp4d_ticker:
342 SAVE_ALL
343 or %l0, PSR_PIL, %g2
344 sethi %hi(CC_ICLR), %o0
345 sethi %hi(1 << 14), %o1
346 or %o0, %lo(CC_ICLR), %o0
347 stha %o1, [%o0] ASI_M_MXCC /* Clear PIL 14 in MXCC's ICLR */
348 wr %g2, 0x0, %psr
349 WRITE_PAUSE
350 wr %g2, PSR_ET, %psr
351 WRITE_PAUSE
352 call smp4d_percpu_timer_interrupt
353 add %sp, STACKFRAME_SZ, %o0
354 wr %l0, PSR_ET, %psr
355 WRITE_PAUSE
356 RESTORE_ALL
357
358 .align 4
359 .globl linux_trap_ipi15_sun4d
360 linux_trap_ipi15_sun4d:
361 SAVE_ALL
362 sethi %hi(CC_BASE), %o4
363 sethi %hi(MXCC_ERR_ME|MXCC_ERR_PEW|MXCC_ERR_ASE|MXCC_ERR_PEE), %o2
364 or %o4, (CC_EREG - CC_BASE), %o0
365 ldda [%o0] ASI_M_MXCC, %o0
366 andcc %o0, %o2, %g0
367 bne 1f
368 sethi %hi(BB_STAT2), %o2
369 lduba [%o2] ASI_M_CTL, %o2
370 andcc %o2, BB_STAT2_MASK, %g0
371 bne 2f
372 or %o4, (CC_ICLR - CC_BASE), %o0
373 sethi %hi(1 << 15), %o1
374 stha %o1, [%o0] ASI_M_MXCC /* Clear PIL 15 in MXCC's ICLR */
375 or %l0, PSR_PIL, %l4
376 wr %l4, 0x0, %psr
377 WRITE_PAUSE
378 wr %l4, PSR_ET, %psr
379 WRITE_PAUSE
380 call smp4d_cross_call_irq
381 nop
382 b ret_trap_lockless_ipi
383 clr %l6
384
385 1: /* MXCC error */
386 2: /* BB error */
387 /* Disable PIL 15 */
388 set CC_IMSK, %l4
389 lduha [%l4] ASI_M_MXCC, %l5
390 sethi %hi(1 << 15), %l7
391 or %l5, %l7, %l5
392 stha %l5, [%l4] ASI_M_MXCC
393 /* FIXME */
394 1: b,a 1b
395
396 .globl smpleon_ipi
397 .extern leon_ipi_interrupt
398 /* SMP per-cpu IPI interrupts are handled specially. */
399 smpleon_ipi:
400 SAVE_ALL
401 or %l0, PSR_PIL, %g2
402 wr %g2, 0x0, %psr
403 WRITE_PAUSE
404 wr %g2, PSR_ET, %psr
405 WRITE_PAUSE
406 call leonsmp_ipi_interrupt
407 add %sp, STACKFRAME_SZ, %o1 ! pt_regs
408 wr %l0, PSR_ET, %psr
409 WRITE_PAUSE
410 RESTORE_ALL
411
412 .align 4
413 .globl linux_trap_ipi15_leon
414 linux_trap_ipi15_leon:
415 SAVE_ALL
416 or %l0, PSR_PIL, %l4
417 wr %l4, 0x0, %psr
418 WRITE_PAUSE
419 wr %l4, PSR_ET, %psr
420 WRITE_PAUSE
421 call leon_cross_call_irq
422 nop
423 b ret_trap_lockless_ipi
424 clr %l6
425
426 #endif /* CONFIG_SMP */
427
428 /* This routine handles illegal instructions and privileged
429 * instruction attempts from user code.
430 */
431 .align 4
432 .globl bad_instruction
433 bad_instruction:
434 sethi %hi(0xc1f80000), %l4
435 ld [%l1], %l5
436 sethi %hi(0x81d80000), %l7
437 and %l5, %l4, %l5
438 cmp %l5, %l7
439 be 1f
440 SAVE_ALL
441
442 wr %l0, PSR_ET, %psr ! re-enable traps
443 WRITE_PAUSE
444
445 add %sp, STACKFRAME_SZ, %o0
446 mov %l1, %o1
447 mov %l2, %o2
448 call do_illegal_instruction
449 mov %l0, %o3
450
451 RESTORE_ALL
452
453 1: /* unimplemented flush - just skip */
454 jmpl %l2, %g0
455 rett %l2 + 4
456
457 .align 4
458 .globl priv_instruction
459 priv_instruction:
460 SAVE_ALL
461
462 wr %l0, PSR_ET, %psr
463 WRITE_PAUSE
464
465 add %sp, STACKFRAME_SZ, %o0
466 mov %l1, %o1
467 mov %l2, %o2
468 call do_priv_instruction
469 mov %l0, %o3
470
471 RESTORE_ALL
472
473 /* This routine handles unaligned data accesses. */
474 .align 4
475 .globl mna_handler
476 mna_handler:
477 andcc %l0, PSR_PS, %g0
478 be mna_fromuser
479 nop
480
481 SAVE_ALL
482
483 wr %l0, PSR_ET, %psr
484 WRITE_PAUSE
485
486 ld [%l1], %o1
487 call kernel_unaligned_trap
488 add %sp, STACKFRAME_SZ, %o0
489
490 RESTORE_ALL
491
492 mna_fromuser:
493 SAVE_ALL
494
495 wr %l0, PSR_ET, %psr ! re-enable traps
496 WRITE_PAUSE
497
498 ld [%l1], %o1
499 call user_unaligned_trap
500 add %sp, STACKFRAME_SZ, %o0
501
502 RESTORE_ALL
503
504 /* This routine handles floating point disabled traps. */
505 .align 4
506 .globl fpd_trap_handler
507 fpd_trap_handler:
508 SAVE_ALL
509
510 wr %l0, PSR_ET, %psr ! re-enable traps
511 WRITE_PAUSE
512
513 add %sp, STACKFRAME_SZ, %o0
514 mov %l1, %o1
515 mov %l2, %o2
516 call do_fpd_trap
517 mov %l0, %o3
518
519 RESTORE_ALL
520
521 /* This routine handles Floating Point Exceptions. */
522 .align 4
523 .globl fpe_trap_handler
524 fpe_trap_handler:
525 set fpsave_magic, %l5
526 cmp %l1, %l5
527 be 1f
528 sethi %hi(fpsave), %l5
529 or %l5, %lo(fpsave), %l5
530 cmp %l1, %l5
531 bne 2f
532 sethi %hi(fpsave_catch2), %l5
533 or %l5, %lo(fpsave_catch2), %l5
534 wr %l0, 0x0, %psr
535 WRITE_PAUSE
536 jmp %l5
537 rett %l5 + 4
538 1:
539 sethi %hi(fpsave_catch), %l5
540 or %l5, %lo(fpsave_catch), %l5
541 wr %l0, 0x0, %psr
542 WRITE_PAUSE
543 jmp %l5
544 rett %l5 + 4
545
546 2:
547 SAVE_ALL
548
549 wr %l0, PSR_ET, %psr ! re-enable traps
550 WRITE_PAUSE
551
552 add %sp, STACKFRAME_SZ, %o0
553 mov %l1, %o1
554 mov %l2, %o2
555 call do_fpe_trap
556 mov %l0, %o3
557
558 RESTORE_ALL
559
560 /* This routine handles Tag Overflow Exceptions. */
561 .align 4
562 .globl do_tag_overflow
563 do_tag_overflow:
564 SAVE_ALL
565
566 wr %l0, PSR_ET, %psr ! re-enable traps
567 WRITE_PAUSE
568
569 add %sp, STACKFRAME_SZ, %o0
570 mov %l1, %o1
571 mov %l2, %o2
572 call handle_tag_overflow
573 mov %l0, %o3
574
575 RESTORE_ALL
576
577 /* This routine handles Watchpoint Exceptions. */
578 .align 4
579 .globl do_watchpoint
580 do_watchpoint:
581 SAVE_ALL
582
583 wr %l0, PSR_ET, %psr ! re-enable traps
584 WRITE_PAUSE
585
586 add %sp, STACKFRAME_SZ, %o0
587 mov %l1, %o1
588 mov %l2, %o2
589 call handle_watchpoint
590 mov %l0, %o3
591
592 RESTORE_ALL
593
594 /* This routine handles Register Access Exceptions. */
595 .align 4
596 .globl do_reg_access
597 do_reg_access:
598 SAVE_ALL
599
600 wr %l0, PSR_ET, %psr ! re-enable traps
601 WRITE_PAUSE
602
603 add %sp, STACKFRAME_SZ, %o0
604 mov %l1, %o1
605 mov %l2, %o2
606 call handle_reg_access
607 mov %l0, %o3
608
609 RESTORE_ALL
610
611 /* This routine handles Co-Processor Disabled Exceptions. */
612 .align 4
613 .globl do_cp_disabled
614 do_cp_disabled:
615 SAVE_ALL
616
617 wr %l0, PSR_ET, %psr ! re-enable traps
618 WRITE_PAUSE
619
620 add %sp, STACKFRAME_SZ, %o0
621 mov %l1, %o1
622 mov %l2, %o2
623 call handle_cp_disabled
624 mov %l0, %o3
625
626 RESTORE_ALL
627
628 /* This routine handles Co-Processor Exceptions. */
629 .align 4
630 .globl do_cp_exception
631 do_cp_exception:
632 SAVE_ALL
633
634 wr %l0, PSR_ET, %psr ! re-enable traps
635 WRITE_PAUSE
636
637 add %sp, STACKFRAME_SZ, %o0
638 mov %l1, %o1
639 mov %l2, %o2
640 call handle_cp_exception
641 mov %l0, %o3
642
643 RESTORE_ALL
644
645 /* This routine handles Hardware Divide By Zero Exceptions. */
646 .align 4
647 .globl do_hw_divzero
648 do_hw_divzero:
649 SAVE_ALL
650
651 wr %l0, PSR_ET, %psr ! re-enable traps
652 WRITE_PAUSE
653
654 add %sp, STACKFRAME_SZ, %o0
655 mov %l1, %o1
656 mov %l2, %o2
657 call handle_hw_divzero
658 mov %l0, %o3
659
660 RESTORE_ALL
661
662 .align 4
663 .globl do_flush_windows
664 do_flush_windows:
665 SAVE_ALL
666
667 wr %l0, PSR_ET, %psr
668 WRITE_PAUSE
669
670 andcc %l0, PSR_PS, %g0
671 bne dfw_kernel
672 nop
673
674 call flush_user_windows
675 nop
676
677 /* Advance over the trap instruction. */
678 ld [%sp + STACKFRAME_SZ + PT_NPC], %l1
679 add %l1, 0x4, %l2
680 st %l1, [%sp + STACKFRAME_SZ + PT_PC]
681 st %l2, [%sp + STACKFRAME_SZ + PT_NPC]
682
683 RESTORE_ALL
684
685 .globl flush_patch_one
686
687 /* We get these for debugging routines using __builtin_return_address() */
688 dfw_kernel:
689 flush_patch_one:
690 FLUSH_ALL_KERNEL_WINDOWS
691
692 /* Advance over the trap instruction. */
693 ld [%sp + STACKFRAME_SZ + PT_NPC], %l1
694 add %l1, 0x4, %l2
695 st %l1, [%sp + STACKFRAME_SZ + PT_PC]
696 st %l2, [%sp + STACKFRAME_SZ + PT_NPC]
697
698 RESTORE_ALL
699
700 /* The getcc software trap. The user wants the condition codes from
701 * the %psr in register %g1.
702 */
703
704 .align 4
705 .globl getcc_trap_handler
706 getcc_trap_handler:
707 srl %l0, 20, %g1 ! give user
708 and %g1, 0xf, %g1 ! only ICC bits in %psr
709 jmp %l2 ! advance over trap instruction
710 rett %l2 + 0x4 ! like this...
711
712 /* The setcc software trap. The user has condition codes in %g1
713 * that it would like placed in the %psr. Be careful not to flip
714 * any unintentional bits!
715 */
716
717 .align 4
718 .globl setcc_trap_handler
719 setcc_trap_handler:
720 sll %g1, 0x14, %l4
721 set PSR_ICC, %l5
722 andn %l0, %l5, %l0 ! clear ICC bits in %psr
723 and %l4, %l5, %l4 ! clear non-ICC bits in user value
724 or %l4, %l0, %l4 ! or them in... mix mix mix
725
726 wr %l4, 0x0, %psr ! set new %psr
727 WRITE_PAUSE ! TI scumbags...
728
729 jmp %l2 ! advance over trap instruction
730 rett %l2 + 0x4 ! like this...
731
732 sun4m_nmi_error:
733 /* NMI async memory error handling. */
734 sethi %hi(0x80000000), %l4
735 sethi %hi(sun4m_irq_global), %o5
736 ld [%o5 + %lo(sun4m_irq_global)], %l5
737 st %l4, [%l5 + 0x0c] ! sun4m_irq_global->mask_set=0x80000000
738 WRITE_PAUSE
739 ld [%l5 + 0x00], %g0 ! sun4m_irq_global->pending
740 WRITE_PAUSE
741 or %l0, PSR_PIL, %l4
742 wr %l4, 0x0, %psr
743 WRITE_PAUSE
744 wr %l4, PSR_ET, %psr
745 WRITE_PAUSE
746 call sun4m_nmi
747 nop
748 st %l4, [%l5 + 0x08] ! sun4m_irq_global->mask_clear=0x80000000
749 WRITE_PAUSE
750 ld [%l5 + 0x00], %g0 ! sun4m_irq_global->pending
751 WRITE_PAUSE
752 RESTORE_ALL
753
754 #ifndef CONFIG_SMP
755 .align 4
756 .globl linux_trap_ipi15_sun4m
757 linux_trap_ipi15_sun4m:
758 SAVE_ALL
759
760 ba sun4m_nmi_error
761 nop
762 #endif /* CONFIG_SMP */
763
764 .align 4
765 .globl srmmu_fault
766 srmmu_fault:
767 mov 0x400, %l5
768 mov 0x300, %l4
769
770 LEON_PI(lda [%l5] ASI_LEON_MMUREGS, %l6) ! read sfar first
771 SUN_PI_(lda [%l5] ASI_M_MMUREGS, %l6) ! read sfar first
772
773 LEON_PI(lda [%l4] ASI_LEON_MMUREGS, %l5) ! read sfsr last
774 SUN_PI_(lda [%l4] ASI_M_MMUREGS, %l5) ! read sfsr last
775
776 andn %l6, 0xfff, %l6
777 srl %l5, 6, %l5 ! and encode all info into l7
778
779 and %l5, 2, %l5
780 or %l5, %l6, %l6
781
782 or %l6, %l7, %l7 ! l7 = [addr,write,txtfault]
783
784 SAVE_ALL
785
786 mov %l7, %o1
787 mov %l7, %o2
788 and %o1, 1, %o1 ! arg2 = text_faultp
789 mov %l7, %o3
790 and %o2, 2, %o2 ! arg3 = writep
791 andn %o3, 0xfff, %o3 ! arg4 = faulting address
792
793 wr %l0, PSR_ET, %psr
794 WRITE_PAUSE
795
796 call do_sparc_fault
797 add %sp, STACKFRAME_SZ, %o0 ! arg1 = pt_regs ptr
798
799 RESTORE_ALL
800
801 .align 4
802 .globl sys_nis_syscall
803 sys_nis_syscall:
804 mov %o7, %l5
805 add %sp, STACKFRAME_SZ, %o0 ! pt_regs *regs arg
806 call c_sys_nis_syscall
807 mov %l5, %o7
808
809 sunos_execv:
810 .globl sunos_execv
811 b sys_execve
812 clr %i2
813
814 .align 4
815 .globl sys_sparc_pipe
816 sys_sparc_pipe:
817 mov %o7, %l5
818 add %sp, STACKFRAME_SZ, %o0 ! pt_regs *regs arg
819 call sparc_pipe
820 mov %l5, %o7
821
822 .align 4
823 .globl sys_sigstack
824 sys_sigstack:
825 mov %o7, %l5
826 mov %fp, %o2
827 call do_sys_sigstack
828 mov %l5, %o7
829
830 .align 4
831 .globl sys_sigreturn
832 sys_sigreturn:
833 call do_sigreturn
834 add %sp, STACKFRAME_SZ, %o0
835
836 ld [%curptr + TI_FLAGS], %l5
837 andcc %l5, _TIF_SYSCALL_TRACE, %g0
838 be 1f
839 nop
840
841 call syscall_trace
842 mov 1, %o1
843
844 1:
845 /* We don't want to muck with user registers like a
846 * normal syscall, just return.
847 */
848 RESTORE_ALL
849
850 .align 4
851 .globl sys_rt_sigreturn
852 sys_rt_sigreturn:
853 call do_rt_sigreturn
854 add %sp, STACKFRAME_SZ, %o0
855
856 ld [%curptr + TI_FLAGS], %l5
857 andcc %l5, _TIF_SYSCALL_TRACE, %g0
858 be 1f
859 nop
860
861 add %sp, STACKFRAME_SZ, %o0
862 call syscall_trace
863 mov 1, %o1
864
865 1:
866 /* We are returning to a signal handler. */
867 RESTORE_ALL
868
869 /* Now that we have a real sys_clone, sys_fork() is
870 * implemented in terms of it. Our _real_ implementation
871 * of SunOS vfork() will use sys_vfork().
872 *
873 * XXX These three should be consolidated into mostly shared
874 * XXX code just like on sparc64... -DaveM
875 */
876 .align 4
877 .globl sys_fork, flush_patch_two
878 sys_fork:
879 mov %o7, %l5
880 flush_patch_two:
881 FLUSH_ALL_KERNEL_WINDOWS;
882 ld [%curptr + TI_TASK], %o4
883 rd %psr, %g4
884 WRITE_PAUSE
885 mov SIGCHLD, %o0 ! arg0: clone flags
886 rd %wim, %g5
887 WRITE_PAUSE
888 mov %fp, %o1 ! arg1: usp
889 std %g4, [%o4 + AOFF_task_thread + AOFF_thread_fork_kpsr]
890 add %sp, STACKFRAME_SZ, %o2 ! arg2: pt_regs ptr
891 mov 0, %o3
892 call sparc_do_fork
893 mov %l5, %o7
894
895 /* Whee, kernel threads! */
896 .globl sys_clone, flush_patch_three
897 sys_clone:
898 mov %o7, %l5
899 flush_patch_three:
900 FLUSH_ALL_KERNEL_WINDOWS;
901 ld [%curptr + TI_TASK], %o4
902 rd %psr, %g4
903 WRITE_PAUSE
904
905 /* arg0,1: flags,usp -- loaded already */
906 cmp %o1, 0x0 ! Is new_usp NULL?
907 rd %wim, %g5
908 WRITE_PAUSE
909 be,a 1f
910 mov %fp, %o1 ! yes, use callers usp
911 andn %o1, 7, %o1 ! no, align to 8 bytes
912 1:
913 std %g4, [%o4 + AOFF_task_thread + AOFF_thread_fork_kpsr]
914 add %sp, STACKFRAME_SZ, %o2 ! arg2: pt_regs ptr
915 mov 0, %o3
916 call sparc_do_fork
917 mov %l5, %o7
918
919 /* Whee, real vfork! */
920 .globl sys_vfork, flush_patch_four
921 sys_vfork:
922 flush_patch_four:
923 FLUSH_ALL_KERNEL_WINDOWS;
924 ld [%curptr + TI_TASK], %o4
925 rd %psr, %g4
926 WRITE_PAUSE
927 rd %wim, %g5
928 WRITE_PAUSE
929 std %g4, [%o4 + AOFF_task_thread + AOFF_thread_fork_kpsr]
930 sethi %hi(0x4000 | 0x0100 | SIGCHLD), %o0
931 mov %fp, %o1
932 or %o0, %lo(0x4000 | 0x0100 | SIGCHLD), %o0
933 sethi %hi(sparc_do_fork), %l1
934 mov 0, %o3
935 jmpl %l1 + %lo(sparc_do_fork), %g0
936 add %sp, STACKFRAME_SZ, %o2
937
938 .align 4
939 linux_sparc_ni_syscall:
940 sethi %hi(sys_ni_syscall), %l7
941 b do_syscall
942 or %l7, %lo(sys_ni_syscall), %l7
943
944 linux_syscall_trace:
945 add %sp, STACKFRAME_SZ, %o0
946 call syscall_trace
947 mov 0, %o1
948 cmp %o0, 0
949 bne 3f
950 mov -ENOSYS, %o0
951 mov %i0, %o0
952 mov %i1, %o1
953 mov %i2, %o2
954 mov %i3, %o3
955 b 2f
956 mov %i4, %o4
957
958 .globl ret_from_fork
959 ret_from_fork:
960 call schedule_tail
961 ld [%g3 + TI_TASK], %o0
962 b ret_sys_call
963 ld [%sp + STACKFRAME_SZ + PT_I0], %o0
964
965 .globl ret_from_kernel_thread
966 ret_from_kernel_thread:
967 call schedule_tail
968 ld [%g3 + TI_TASK], %o0
969 ld [%sp + STACKFRAME_SZ + PT_G1], %l0
970 call %l0
971 ld [%sp + STACKFRAME_SZ + PT_G2], %o0
972 rd %psr, %l1
973 ld [%sp + STACKFRAME_SZ + PT_PSR], %l0
974 andn %l0, PSR_CWP, %l0
975 nop
976 and %l1, PSR_CWP, %l1
977 or %l0, %l1, %l0
978 st %l0, [%sp + STACKFRAME_SZ + PT_PSR]
979 b ret_sys_call
980 mov 0, %o0
981
982 /* Linux native system calls enter here... */
983 .align 4
984 .globl linux_sparc_syscall
985 linux_sparc_syscall:
986 sethi %hi(PSR_SYSCALL), %l4
987 or %l0, %l4, %l0
988 /* Direct access to user regs, must faster. */
989 cmp %g1, NR_syscalls
990 bgeu linux_sparc_ni_syscall
991 sll %g1, 2, %l4
992 ld [%l7 + %l4], %l7
993
994 do_syscall:
995 SAVE_ALL_HEAD
996 rd %wim, %l3
997
998 wr %l0, PSR_ET, %psr
999 mov %i0, %o0
1000 mov %i1, %o1
1001 mov %i2, %o2
1002
1003 ld [%curptr + TI_FLAGS], %l5
1004 mov %i3, %o3
1005 andcc %l5, _TIF_SYSCALL_TRACE, %g0
1006 mov %i4, %o4
1007 bne linux_syscall_trace
1008 mov %i0, %l5
1009 2:
1010 call %l7
1011 mov %i5, %o5
1012
1013 3:
1014 st %o0, [%sp + STACKFRAME_SZ + PT_I0]
1015
1016 ret_sys_call:
1017 ld [%curptr + TI_FLAGS], %l6
1018 cmp %o0, -ERESTART_RESTARTBLOCK
1019 ld [%sp + STACKFRAME_SZ + PT_PSR], %g3
1020 set PSR_C, %g2
1021 bgeu 1f
1022 andcc %l6, _TIF_SYSCALL_TRACE, %g0
1023
1024 /* System call success, clear Carry condition code. */
1025 andn %g3, %g2, %g3
1026 clr %l6
1027 st %g3, [%sp + STACKFRAME_SZ + PT_PSR]
1028 bne linux_syscall_trace2
1029 ld [%sp + STACKFRAME_SZ + PT_NPC], %l1 /* pc = npc */
1030 add %l1, 0x4, %l2 /* npc = npc+4 */
1031 st %l1, [%sp + STACKFRAME_SZ + PT_PC]
1032 b ret_trap_entry
1033 st %l2, [%sp + STACKFRAME_SZ + PT_NPC]
1034 1:
1035 /* System call failure, set Carry condition code.
1036 * Also, get abs(errno) to return to the process.
1037 */
1038 sub %g0, %o0, %o0
1039 or %g3, %g2, %g3
1040 st %o0, [%sp + STACKFRAME_SZ + PT_I0]
1041 mov 1, %l6
1042 st %g3, [%sp + STACKFRAME_SZ + PT_PSR]
1043 bne linux_syscall_trace2
1044 ld [%sp + STACKFRAME_SZ + PT_NPC], %l1 /* pc = npc */
1045 add %l1, 0x4, %l2 /* npc = npc+4 */
1046 st %l1, [%sp + STACKFRAME_SZ + PT_PC]
1047 b ret_trap_entry
1048 st %l2, [%sp + STACKFRAME_SZ + PT_NPC]
1049
1050 linux_syscall_trace2:
1051 add %sp, STACKFRAME_SZ, %o0
1052 mov 1, %o1
1053 call syscall_trace
1054 add %l1, 0x4, %l2 /* npc = npc+4 */
1055 st %l1, [%sp + STACKFRAME_SZ + PT_PC]
1056 b ret_trap_entry
1057 st %l2, [%sp + STACKFRAME_SZ + PT_NPC]
1058
1059
1060 /* Saving and restoring the FPU state is best done from lowlevel code.
1061 *
1062 * void fpsave(unsigned long *fpregs, unsigned long *fsr,
1063 * void *fpqueue, unsigned long *fpqdepth)
1064 */
1065
1066 .globl fpsave
1067 fpsave:
1068 st %fsr, [%o1] ! this can trap on us if fpu is in bogon state
1069 ld [%o1], %g1
1070 set 0x2000, %g4
1071 andcc %g1, %g4, %g0
1072 be 2f
1073 mov 0, %g2
1074
1075 /* We have an fpqueue to save. */
1076 1:
1077 std %fq, [%o2]
1078 fpsave_magic:
1079 st %fsr, [%o1]
1080 ld [%o1], %g3
1081 andcc %g3, %g4, %g0
1082 add %g2, 1, %g2
1083 bne 1b
1084 add %o2, 8, %o2
1085
1086 2:
1087 st %g2, [%o3]
1088
1089 std %f0, [%o0 + 0x00]
1090 std %f2, [%o0 + 0x08]
1091 std %f4, [%o0 + 0x10]
1092 std %f6, [%o0 + 0x18]
1093 std %f8, [%o0 + 0x20]
1094 std %f10, [%o0 + 0x28]
1095 std %f12, [%o0 + 0x30]
1096 std %f14, [%o0 + 0x38]
1097 std %f16, [%o0 + 0x40]
1098 std %f18, [%o0 + 0x48]
1099 std %f20, [%o0 + 0x50]
1100 std %f22, [%o0 + 0x58]
1101 std %f24, [%o0 + 0x60]
1102 std %f26, [%o0 + 0x68]
1103 std %f28, [%o0 + 0x70]
1104 retl
1105 std %f30, [%o0 + 0x78]
1106
1107 /* Thanks for Theo Deraadt and the authors of the Sprite/netbsd/openbsd
1108 * code for pointing out this possible deadlock, while we save state
1109 * above we could trap on the fsr store so our low level fpu trap
1110 * code has to know how to deal with this.
1111 */
1112 fpsave_catch:
1113 b fpsave_magic + 4
1114 st %fsr, [%o1]
1115
1116 fpsave_catch2:
1117 b fpsave + 4
1118 st %fsr, [%o1]
1119
1120 /* void fpload(unsigned long *fpregs, unsigned long *fsr); */
1121
1122 .globl fpload
1123 fpload:
1124 ldd [%o0 + 0x00], %f0
1125 ldd [%o0 + 0x08], %f2
1126 ldd [%o0 + 0x10], %f4
1127 ldd [%o0 + 0x18], %f6
1128 ldd [%o0 + 0x20], %f8
1129 ldd [%o0 + 0x28], %f10
1130 ldd [%o0 + 0x30], %f12
1131 ldd [%o0 + 0x38], %f14
1132 ldd [%o0 + 0x40], %f16
1133 ldd [%o0 + 0x48], %f18
1134 ldd [%o0 + 0x50], %f20
1135 ldd [%o0 + 0x58], %f22
1136 ldd [%o0 + 0x60], %f24
1137 ldd [%o0 + 0x68], %f26
1138 ldd [%o0 + 0x70], %f28
1139 ldd [%o0 + 0x78], %f30
1140 ld [%o1], %fsr
1141 retl
1142 nop
1143
1144 /* __ndelay and __udelay take two arguments:
1145 * 0 - nsecs or usecs to delay
1146 * 1 - per_cpu udelay_val (loops per jiffy)
1147 *
1148 * Note that ndelay gives HZ times higher resolution but has a 10ms
1149 * limit. udelay can handle up to 1s.
1150 */
1151 .globl __ndelay
1152 __ndelay:
1153 save %sp, -STACKFRAME_SZ, %sp
1154 mov %i0, %o0 ! round multiplier up so large ns ok
1155 mov 0x1ae, %o1 ! 2**32 / (1 000 000 000 / HZ)
1156 umul %o0, %o1, %o0
1157 rd %y, %o1
1158 mov %i1, %o1 ! udelay_val
1159 umul %o0, %o1, %o0
1160 rd %y, %o1
1161 ba delay_continue
1162 mov %o1, %o0 ! >>32 later for better resolution
1163
1164 .globl __udelay
1165 __udelay:
1166 save %sp, -STACKFRAME_SZ, %sp
1167 mov %i0, %o0
1168 sethi %hi(0x10c7), %o1 ! round multiplier up so large us ok
1169 or %o1, %lo(0x10c7), %o1 ! 2**32 / 1 000 000
1170 umul %o0, %o1, %o0
1171 rd %y, %o1
1172 mov %i1, %o1 ! udelay_val
1173 umul %o0, %o1, %o0
1174 rd %y, %o1
1175 sethi %hi(0x028f4b62), %l0 ! Add in rounding constant * 2**32,
1176 or %g0, %lo(0x028f4b62), %l0
1177 addcc %o0, %l0, %o0 ! 2**32 * 0.009 999
1178 bcs,a 3f
1179 add %o1, 0x01, %o1
1180 3:
1181 mov HZ, %o0 ! >>32 earlier for wider range
1182 umul %o0, %o1, %o0
1183 rd %y, %o1
1184
1185 delay_continue:
1186 cmp %o0, 0x0
1187 1:
1188 bne 1b
1189 subcc %o0, 1, %o0
1190
1191 ret
1192 restore
1193
1194 /* Handle a software breakpoint */
1195 /* We have to inform parent that child has stopped */
1196 .align 4
1197 .globl breakpoint_trap
1198 breakpoint_trap:
1199 rd %wim,%l3
1200 SAVE_ALL
1201 wr %l0, PSR_ET, %psr
1202 WRITE_PAUSE
1203
1204 st %i0, [%sp + STACKFRAME_SZ + PT_G0] ! for restarting syscalls
1205 call sparc_breakpoint
1206 add %sp, STACKFRAME_SZ, %o0
1207
1208 RESTORE_ALL
1209
1210 #ifdef CONFIG_KGDB
1211 .align 4
1212 .globl kgdb_trap_low
1213 .type kgdb_trap_low,#function
1214 kgdb_trap_low:
1215 rd %wim,%l3
1216 SAVE_ALL
1217 wr %l0, PSR_ET, %psr
1218 WRITE_PAUSE
1219
1220 call kgdb_trap
1221 add %sp, STACKFRAME_SZ, %o0
1222
1223 RESTORE_ALL
1224 .size kgdb_trap_low,.-kgdb_trap_low
1225 #endif
1226
1227 .align 4
1228 .globl flush_patch_exception
1229 flush_patch_exception:
1230 FLUSH_ALL_KERNEL_WINDOWS;
1231 ldd [%o0], %o6
1232 jmpl %o7 + 0xc, %g0 ! see asm-sparc/processor.h
1233 mov 1, %g1 ! signal EFAULT condition
1234
1235 .align 4
1236 .globl kill_user_windows, kuw_patch1_7win
1237 .globl kuw_patch1
1238 kuw_patch1_7win: sll %o3, 6, %o3
1239
1240 /* No matter how much overhead this routine has in the worst
1241 * case scenerio, it is several times better than taking the
1242 * traps with the old method of just doing flush_user_windows().
1243 */
1244 kill_user_windows:
1245 ld [%g6 + TI_UWINMASK], %o0 ! get current umask
1246 orcc %g0, %o0, %g0 ! if no bits set, we are done
1247 be 3f ! nothing to do
1248 rd %psr, %o5 ! must clear interrupts
1249 or %o5, PSR_PIL, %o4 ! or else that could change
1250 wr %o4, 0x0, %psr ! the uwinmask state
1251 WRITE_PAUSE ! burn them cycles
1252 1:
1253 ld [%g6 + TI_UWINMASK], %o0 ! get consistent state
1254 orcc %g0, %o0, %g0 ! did an interrupt come in?
1255 be 4f ! yep, we are done
1256 rd %wim, %o3 ! get current wim
1257 srl %o3, 1, %o4 ! simulate a save
1258 kuw_patch1:
1259 sll %o3, 7, %o3 ! compute next wim
1260 or %o4, %o3, %o3 ! result
1261 andncc %o0, %o3, %o0 ! clean this bit in umask
1262 bne kuw_patch1 ! not done yet
1263 srl %o3, 1, %o4 ! begin another save simulation
1264 wr %o3, 0x0, %wim ! set the new wim
1265 st %g0, [%g6 + TI_UWINMASK] ! clear uwinmask
1266 4:
1267 wr %o5, 0x0, %psr ! re-enable interrupts
1268 WRITE_PAUSE ! burn baby burn
1269 3:
1270 retl ! return
1271 st %g0, [%g6 + TI_W_SAVED] ! no windows saved
1272
1273 .align 4
1274 .globl restore_current
1275 restore_current:
1276 LOAD_CURRENT(g6, o0)
1277 retl
1278 nop
1279
1280 #ifdef CONFIG_PCIC_PCI
1281 #include <asm/pcic.h>
1282
1283 .align 4
1284 .globl linux_trap_ipi15_pcic
1285 linux_trap_ipi15_pcic:
1286 rd %wim, %l3
1287 SAVE_ALL
1288
1289 /*
1290 * First deactivate NMI
1291 * or we cannot drop ET, cannot get window spill traps.
1292 * The busy loop is necessary because the PIO error
1293 * sometimes does not go away quickly and we trap again.
1294 */
1295 sethi %hi(pcic_regs), %o1
1296 ld [%o1 + %lo(pcic_regs)], %o2
1297
1298 ! Get pending status for printouts later.
1299 ld [%o2 + PCI_SYS_INT_PENDING], %o0
1300
1301 mov PCI_SYS_INT_PENDING_CLEAR_ALL, %o1
1302 stb %o1, [%o2 + PCI_SYS_INT_PENDING_CLEAR]
1303 1:
1304 ld [%o2 + PCI_SYS_INT_PENDING], %o1
1305 andcc %o1, ((PCI_SYS_INT_PENDING_PIO|PCI_SYS_INT_PENDING_PCI)>>24), %g0
1306 bne 1b
1307 nop
1308
1309 or %l0, PSR_PIL, %l4
1310 wr %l4, 0x0, %psr
1311 WRITE_PAUSE
1312 wr %l4, PSR_ET, %psr
1313 WRITE_PAUSE
1314
1315 call pcic_nmi
1316 add %sp, STACKFRAME_SZ, %o1 ! struct pt_regs *regs
1317 RESTORE_ALL
1318
1319 .globl pcic_nmi_trap_patch
1320 pcic_nmi_trap_patch:
1321 sethi %hi(linux_trap_ipi15_pcic), %l3
1322 jmpl %l3 + %lo(linux_trap_ipi15_pcic), %g0
1323 rd %psr, %l0
1324 .word 0
1325
1326 #endif /* CONFIG_PCIC_PCI */
1327
1328 .globl flushw_all
1329 flushw_all:
1330 save %sp, -0x40, %sp
1331 save %sp, -0x40, %sp
1332 save %sp, -0x40, %sp
1333 save %sp, -0x40, %sp
1334 save %sp, -0x40, %sp
1335 save %sp, -0x40, %sp
1336 save %sp, -0x40, %sp
1337 restore
1338 restore
1339 restore
1340 restore
1341 restore
1342 restore
1343 ret
1344 restore
1345
1346 #ifdef CONFIG_SMP
1347 ENTRY(hard_smp_processor_id)
1348 661: rd %tbr, %g1
1349 srl %g1, 12, %o0
1350 and %o0, 3, %o0
1351 .section .cpuid_patch, "ax"
1352 /* Instruction location. */
1353 .word 661b
1354 /* SUN4D implementation. */
1355 lda [%g0] ASI_M_VIKING_TMP1, %o0
1356 nop
1357 nop
1358 /* LEON implementation. */
1359 rd %asr17, %o0
1360 srl %o0, 0x1c, %o0
1361 nop
1362 .previous
1363 retl
1364 nop
1365 ENDPROC(hard_smp_processor_id)
1366 #endif
1367
1368 /* End of entry.S */
Linux kernel - Deliverables
This page took 0.06005 seconds and 5 git commands to generate.