Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

[deliverable/linux.git] / arch / tile / kernel / intvec_64.S

/*
 * Copyright 2011 Tilera Corporation. All Rights Reserved.
 *
 *   This program is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU General Public License
 *   as published by the Free Software Foundation, version 2.
 *
 *   This program is distributed in the hope that it will be useful, but
 *   WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
 *   NON INFRINGEMENT.  See the GNU General Public License for
 *   more details.
 *
 * Linux interrupt vectors.
 */

#include <linux/linkage.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/init.h>
#include <asm/ptrace.h>
#include <asm/thread_info.h>
#include <asm/irqflags.h>
#include <asm/asm-offsets.h>
#include <asm/types.h>
#include <asm/traps.h>
#include <asm/signal.h>
#include <hv/hypervisor.h>
#include <arch/abi.h>
#include <arch/interrupts.h>
#include <arch/spr_def.h>

#define PTREGS_PTR(reg, ptreg) addli reg, sp, C_ABI_SAVE_AREA_SIZE + (ptreg)

#define PTREGS_OFFSET_SYSCALL PTREGS_OFFSET_REG(TREG_SYSCALL_NR)

#if CONFIG_KERNEL_PL == 1 || CONFIG_KERNEL_PL == 2
/*
 * Set "result" non-zero if ex1 holds the PL of the kernel
 * (with or without ICS being set).  Note this works only
 * because we never find the PL at level 3.
 */
# define IS_KERNEL_EX1(result, ex1) andi result, ex1, CONFIG_KERNEL_PL
#else
# error Recode IS_KERNEL_EX1 for CONFIG_KERNEL_PL
#endif

        .macro  push_reg reg, ptr=sp, delta=-8
        {
         st     \ptr, \reg
         addli  \ptr, \ptr, \delta
        }
        .endm

        .macro  pop_reg reg, ptr=sp, delta=8
        {
         ld     \reg, \ptr
         addli  \ptr, \ptr, \delta
        }
        .endm

        .macro  pop_reg_zero reg, zreg, ptr=sp, delta=8
        {
         move   \zreg, zero
         ld     \reg, \ptr
         addi   \ptr, \ptr, \delta
        }
        .endm

        .macro  push_extra_callee_saves reg
        PTREGS_PTR(\reg, PTREGS_OFFSET_REG(51))
        push_reg r51, \reg
        push_reg r50, \reg
        push_reg r49, \reg
        push_reg r48, \reg
        push_reg r47, \reg
        push_reg r46, \reg
        push_reg r45, \reg
        push_reg r44, \reg
        push_reg r43, \reg
        push_reg r42, \reg
        push_reg r41, \reg
        push_reg r40, \reg
        push_reg r39, \reg
        push_reg r38, \reg
        push_reg r37, \reg
        push_reg r36, \reg
        push_reg r35, \reg
        push_reg r34, \reg, PTREGS_OFFSET_BASE - PTREGS_OFFSET_REG(34)
        .endm

        .macro  panic str
        .pushsection .rodata, "a"
1:
        .asciz  "\str"
        .popsection
        {
         moveli r0, hw2_last(1b)
        }
        {
         shl16insli r0, r0, hw1(1b)
        }
        {
         shl16insli r0, r0, hw0(1b)
         jal    panic
        }
        .endm

        /*
         * Unalign data exception fast handling: In order to handle
         * unaligned data access, a fast JIT version is generated and stored
         * in a specific area in user space. We first need to do a quick poke
         * to see if the JIT is available. We use certain bits in the fault
         * PC (3 to 9 is used for 16KB page size) as index to address the JIT
         * code area. The first 64bit word is the fault PC, and the 2nd one is
         * the fault bundle itself. If these 2 words both match, then we
         * directly "iret" to JIT code. If not, a slow path is invoked to
         * generate new JIT code. Note: the current JIT code WILL be
         * overwritten if it existed. So, ideally we can handle 128 unalign
         * fixups via JIT. For lookup efficiency and to effectively support
         * tight loops with multiple unaligned reference, a simple
         * direct-mapped cache is used.
         *
         * SPR_EX_CONTEXT_K_0 is modified to return to JIT code.
         * SPR_EX_CONTEXT_K_1 has ICS set.
         * SPR_EX_CONTEXT_0_0 is setup to user program's next PC.
         * SPR_EX_CONTEXT_0_1 = 0.
         */
        .macro int_hand_unalign_fast  vecnum, vecname
        .org  (\vecnum << 8)
intvec_\vecname:
        /* Put r3 in SPR_SYSTEM_SAVE_K_1.  */
        mtspr   SPR_SYSTEM_SAVE_K_1, r3

        mfspr   r3, SPR_EX_CONTEXT_K_1
        /*
         * Examine if exception comes from user without ICS set.
         * If not, just go directly to the slow path.
         */
        bnez    r3, hand_unalign_slow_nonuser

        mfspr   r3, SPR_SYSTEM_SAVE_K_0

        /* Get &thread_info->unalign_jit_tmp[0] in r3. */
        bfexts  r3, r3, 0, CPU_SHIFT-1
        mm      r3, zero, LOG2_THREAD_SIZE, 63
        addli   r3, r3, THREAD_INFO_UNALIGN_JIT_TMP_OFFSET

        /*
         * Save r0, r1, r2 into thread_info array r3 points to
         * from low to high memory in order.
         */
        st_add  r3, r0, 8
        st_add  r3, r1, 8
        {
         st_add r3, r2, 8
         andi   r2, sp, 7
        }

        /* Save stored r3 value so we can revert it on a page fault. */
        mfspr   r1, SPR_SYSTEM_SAVE_K_1
        st      r3, r1

        {
         /* Generate a SIGBUS if sp is not 8-byte aligned. */
         bnez   r2, hand_unalign_slow_badsp
        }

        /*
         * Get the thread_info in r0; load r1 with pc. Set the low bit of sp
         * as an indicator to the page fault code in case we fault.
         */
        {
         ori    sp, sp, 1
         mfspr  r1, SPR_EX_CONTEXT_K_0
        }

        /* Add the jit_info offset in thread_info; extract r1 [3:9] into r2. */
        {
         addli  r0, r3, THREAD_INFO_UNALIGN_JIT_BASE_OFFSET - \
          (THREAD_INFO_UNALIGN_JIT_TMP_OFFSET + (3 * 8))
         bfextu r2, r1, 3, (2 + PAGE_SHIFT - UNALIGN_JIT_SHIFT)
        }

        /* Load the jit_info; multiply r2 by 128. */
        {
         ld     r0, r0
         shli   r2, r2, UNALIGN_JIT_SHIFT
        }

        /*
         * If r0 is NULL, the JIT page is not mapped, so go to slow path;
         * add offset r2 to r0 at the same time.
         */
        {
         beqz   r0, hand_unalign_slow
         add    r2, r0, r2
        }

        /*
         * We are loading from userspace (both the JIT info PC and
         * instruction word, and the instruction word we executed)
         * and since either could fault while holding the interrupt
         * critical section, we must tag this region and check it in
         * do_page_fault() to handle it properly.
         */
ENTRY(__start_unalign_asm_code)

        /* Load first word of JIT in r0 and increment r2 by 8. */
        ld_add  r0, r2, 8

        /*
         * Compare the PC with the 1st word in JIT; load the fault bundle
         * into r1.
         */
        {
         cmpeq  r0, r0, r1
         ld     r1, r1
        }

        /* Go to slow path if PC doesn't match. */
        beqz    r0, hand_unalign_slow

        /*
         * Load the 2nd word of JIT, which is supposed to be the fault
         * bundle for a cache hit. Increment r2; after this bundle r2 will
         * point to the potential start of the JIT code we want to run.
         */
        ld_add  r0, r2, 8

        /* No further accesses to userspace are done after this point. */
ENTRY(__end_unalign_asm_code)

        /* Compare the real bundle with what is saved in the JIT area. */
        {
         cmpeq  r0, r1, r0
         mtspr  SPR_EX_CONTEXT_0_1, zero
        }

        /* Go to slow path if the fault bundle does not match. */
        beqz    r0, hand_unalign_slow

        /*
         * A cache hit is found.
         * r2 points to start of JIT code (3rd word).
         * r0 is the fault pc.
         * r1 is the fault bundle.
         * Reset the low bit of sp.
         */
        {
         mfspr  r0, SPR_EX_CONTEXT_K_0
         andi   sp, sp, ~1
        }

        /* Write r2 into EX_CONTEXT_K_0 and increment PC. */
        {
         mtspr  SPR_EX_CONTEXT_K_0, r2
         addi   r0, r0, 8
        }

        /*
         * Set ICS on kernel EX_CONTEXT_K_1 in order to "iret" to
         * user with ICS set. This way, if the JIT fixup causes another
         * unalign exception (which shouldn't be possible) the user
         * process will be terminated with SIGBUS. Also, our fixup will
         * run without interleaving with external interrupts.
         * Each fixup is at most 14 bundles, so it won't hold ICS for long.
         */
        {
         movei  r1, PL_ICS_EX1(USER_PL, 1)
         mtspr  SPR_EX_CONTEXT_0_0, r0
        }

        {
         mtspr  SPR_EX_CONTEXT_K_1, r1
         addi   r3, r3, -(3 * 8)
        }

        /* Restore r0..r3. */
        ld_add  r0, r3, 8
        ld_add  r1, r3, 8
        ld_add  r2, r3, 8
        ld      r3, r3

        iret
        ENDPROC(intvec_\vecname)
        .endm

#ifdef __COLLECT_LINKER_FEEDBACK__
        .pushsection .text.intvec_feedback,"ax"
intvec_feedback:
        .popsection
#endif

        /*
         * Default interrupt handler.
         *
         * vecnum is where we'll put this code.
         * c_routine is the C routine we'll call.
         *
         * The C routine is passed two arguments:
         * - A pointer to the pt_regs state.
         * - The interrupt vector number.
         *
         * The "processing" argument specifies the code for processing
         * the interrupt. Defaults to "handle_interrupt".
         */
        .macro __int_hand vecnum, vecname, c_routine,processing=handle_interrupt
intvec_\vecname:
        /* Temporarily save a register so we have somewhere to work. */

        mtspr   SPR_SYSTEM_SAVE_K_1, r0
        mfspr   r0, SPR_EX_CONTEXT_K_1

        /*
         * The unalign data fastpath code sets the low bit in sp to
         * force us to reset it here on fault.
         */
        {
         blbs   sp, 2f
         IS_KERNEL_EX1(r0, r0)
        }

        .ifc    \vecnum, INT_DOUBLE_FAULT
        /*
         * For double-faults from user-space, fall through to the normal
         * register save and stack setup path.  Otherwise, it's the
         * hypervisor giving us one last chance to dump diagnostics, and we
         * branch to the kernel_double_fault routine to do so.
         */
        beqz    r0, 1f
        j       _kernel_double_fault
1:
        .else
        /*
         * If we're coming from user-space, then set sp to the top of
         * the kernel stack.  Otherwise, assume sp is already valid.
         */
        {
         bnez   r0, 0f
         move   r0, sp
        }
        .endif

        .ifc    \c_routine, do_page_fault
        /*
         * The page_fault handler may be downcalled directly by the
         * hypervisor even when Linux is running and has ICS set.
         *
         * In this case the contents of EX_CONTEXT_K_1 reflect the
         * previous fault and can't be relied on to choose whether or
         * not to reinitialize the stack pointer.  So we add a test
         * to see whether SYSTEM_SAVE_K_2 has the high bit set,
         * and if so we don't reinitialize sp, since we must be coming
         * from Linux.  (In fact the precise case is !(val & ~1),
         * but any Linux PC has to have the high bit set.)
         *
         * Note that the hypervisor *always* sets SYSTEM_SAVE_K_2 for
         * any path that turns into a downcall to one of our TLB handlers.
         *
         * FIXME: if we end up never using this path, perhaps we should
         * prevent the hypervisor from generating downcalls in this case.
         * The advantage of getting a downcall is we can panic in Linux.
         */
        mfspr   r0, SPR_SYSTEM_SAVE_K_2
        {
         bltz   r0, 0f    /* high bit in S_S_1_2 is for a PC to use */
         move   r0, sp
        }
        .endif

2:
        /*
         * SYSTEM_SAVE_K_0 holds the cpu number in the high bits, and
         * the current stack top in the lower bits.  So we recover
         * our starting stack value by sign-extending the low bits, then
         * point sp at the top aligned address on the actual stack page.
         */
        mfspr   r0, SPR_SYSTEM_SAVE_K_0
        bfexts  r0, r0, 0, CPU_SHIFT-1

0:
        /*
         * Align the stack mod 64 so we can properly predict what
         * cache lines we need to write-hint to reduce memory fetch
         * latency as we enter the kernel.  The layout of memory is
         * as follows, with cache line 0 at the lowest VA, and cache
         * line 8 just below the r0 value this "andi" computes.
         * Note that we never write to cache line 8, and we skip
         * cache lines 1-3 for syscalls.
         *
         *    cache line 8: ptregs padding (two words)
         *    cache line 7: sp, lr, pc, ex1, faultnum, orig_r0, flags, cmpexch
         *    cache line 6: r46...r53 (tp)
         *    cache line 5: r38...r45
         *    cache line 4: r30...r37
         *    cache line 3: r22...r29
         *    cache line 2: r14...r21
         *    cache line 1: r6...r13
         *    cache line 0: 2 x frame, r0..r5
         */
#if STACK_TOP_DELTA != 64
#error STACK_TOP_DELTA must be 64 for assumptions here and in task_pt_regs()
#endif
        andi    r0, r0, -64

        /*
         * Push the first four registers on the stack, so that we can set
         * them to vector-unique values before we jump to the common code.
         *
         * Registers are pushed on the stack as a struct pt_regs,
         * with the sp initially just above the struct, and when we're
         * done, sp points to the base of the struct, minus
         * C_ABI_SAVE_AREA_SIZE, so we can directly jal to C code.
         *
         * This routine saves just the first four registers, plus the
         * stack context so we can do proper backtracing right away,
         * and defers to handle_interrupt to save the rest.
         * The backtracer needs pc, ex1, lr, sp, r52, and faultnum,
         * and needs sp set to its final location at the bottom of
         * the stack frame.
         */
        addli   r0, r0, PTREGS_OFFSET_LR - (PTREGS_SIZE + KSTK_PTREGS_GAP)
        wh64    r0   /* cache line 7 */
        {
         st     r0, lr
         addli  r0, r0, PTREGS_OFFSET_SP - PTREGS_OFFSET_LR
        }
        {
         st     r0, sp
         addli  sp, r0, PTREGS_OFFSET_REG(52) - PTREGS_OFFSET_SP
        }
        wh64    sp   /* cache line 6 */
        {
         st     sp, r52
         addli  sp, sp, PTREGS_OFFSET_REG(1) - PTREGS_OFFSET_REG(52)
        }
        wh64    sp   /* cache line 0 */
        {
         st     sp, r1
         addli  sp, sp, PTREGS_OFFSET_REG(2) - PTREGS_OFFSET_REG(1)
        }
        {
         st     sp, r2
         addli  sp, sp, PTREGS_OFFSET_REG(3) - PTREGS_OFFSET_REG(2)
        }
        {
         st     sp, r3
         addli  sp, sp, PTREGS_OFFSET_PC - PTREGS_OFFSET_REG(3)
        }
        mfspr   r0, SPR_EX_CONTEXT_K_0
        .ifc \processing,handle_syscall
        /*
         * Bump the saved PC by one bundle so that when we return, we won't
         * execute the same swint instruction again.  We need to do this while
         * we're in the critical section.
         */
        addi    r0, r0, 8
        .endif
        {
         st     sp, r0
         addli  sp, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC
        }
        mfspr   r0, SPR_EX_CONTEXT_K_1
        {
         st     sp, r0
         addi   sp, sp, PTREGS_OFFSET_FAULTNUM - PTREGS_OFFSET_EX1
        /*
         * Use r0 for syscalls so it's a temporary; use r1 for interrupts
         * so that it gets passed through unchanged to the handler routine.
         * Note that the .if conditional confusingly spans bundles.
         */
         .ifc \processing,handle_syscall
         movei  r0, \vecnum
        }
        {
         st     sp, r0
         .else
         movei  r1, \vecnum
        }
        {
         st     sp, r1
         .endif
         addli  sp, sp, PTREGS_OFFSET_REG(0) - PTREGS_OFFSET_FAULTNUM
        }
        mfspr   r0, SPR_SYSTEM_SAVE_K_1    /* Original r0 */
        {
         st     sp, r0
         addi   sp, sp, -PTREGS_OFFSET_REG(0) - 8
        }
        {
         st     sp, zero        /* write zero into "Next SP" frame pointer */
         addi   sp, sp, -8      /* leave SP pointing at bottom of frame */
        }
        .ifc \processing,handle_syscall
        j       handle_syscall
        .else
        /* Capture per-interrupt SPR context to registers. */
        .ifc \c_routine, do_page_fault
        mfspr   r2, SPR_SYSTEM_SAVE_K_3   /* address of page fault */
        mfspr   r3, SPR_SYSTEM_SAVE_K_2   /* info about page fault */
        .else
        .ifc \vecnum, INT_ILL_TRANS
        mfspr   r2, ILL_VA_PC
        .else
        .ifc \vecnum, INT_DOUBLE_FAULT
        mfspr   r2, SPR_SYSTEM_SAVE_K_2   /* double fault info from HV */
        .else
        .ifc \c_routine, do_trap
        mfspr   r2, GPV_REASON
        .else
        .ifc \c_routine, handle_perf_interrupt
        mfspr   r2, PERF_COUNT_STS
        .else
        .ifc \c_routine, handle_perf_interrupt
        mfspr   r2, AUX_PERF_COUNT_STS
        .endif
        .endif
        .endif
        .endif
        .endif
        .endif
        /* Put function pointer in r0 */
        moveli  r0, hw2_last(\c_routine)
        shl16insli r0, r0, hw1(\c_routine)
        {
         shl16insli r0, r0, hw0(\c_routine)
         j       \processing
        }
        .endif
        ENDPROC(intvec_\vecname)

#ifdef __COLLECT_LINKER_FEEDBACK__
        .pushsection .text.intvec_feedback,"ax"
        .org    (\vecnum << 5)
        FEEDBACK_ENTER_EXPLICIT(intvec_\vecname, .intrpt, 1 << 8)
        jrp     lr
        .popsection
#endif

        .endm


        /*
         * Save the rest of the registers that we didn't save in the actual
         * vector itself.  We can't use r0-r10 inclusive here.
         */
        .macro  finish_interrupt_save, function

        /* If it's a syscall, save a proper orig_r0, otherwise just zero. */
        PTREGS_PTR(r52, PTREGS_OFFSET_ORIG_R0)
        {
         .ifc \function,handle_syscall
         st     r52, r0
         .else
         st     r52, zero
         .endif
         PTREGS_PTR(r52, PTREGS_OFFSET_TP)
        }
        st      r52, tp
        {
         mfspr  tp, CMPEXCH_VALUE
         PTREGS_PTR(r52, PTREGS_OFFSET_CMPEXCH)
        }

        /*
         * For ordinary syscalls, we save neither caller- nor callee-
         * save registers, since the syscall invoker doesn't expect the
         * caller-saves to be saved, and the called kernel functions will
         * take care of saving the callee-saves for us.
         *
         * For interrupts we save just the caller-save registers.  Saving
         * them is required (since the "caller" can't save them).  Again,
         * the called kernel functions will restore the callee-save
         * registers for us appropriately.
         *
         * On return, we normally restore nothing special for syscalls,
         * and just the caller-save registers for interrupts.
         *
         * However, there are some important caveats to all this:
         *
         * - We always save a few callee-save registers to give us
         *   some scratchpad registers to carry across function calls.
         *
         * - fork/vfork/etc require us to save all the callee-save
         *   registers, which we do in PTREGS_SYSCALL_ALL_REGS, below.
         *
         * - We always save r0..r5 and r10 for syscalls, since we need
         *   to reload them a bit later for the actual kernel call, and
         *   since we might need them for -ERESTARTNOINTR, etc.
         *
         * - Before invoking a signal handler, we save the unsaved
         *   callee-save registers so they are visible to the
         *   signal handler or any ptracer.
         *
         * - If the unsaved callee-save registers are modified, we set
         *   a bit in pt_regs so we know to reload them from pt_regs
         *   and not just rely on the kernel function unwinding.
         *   (Done for ptrace register writes and SA_SIGINFO handler.)
         */
        {
         st     r52, tp
         PTREGS_PTR(r52, PTREGS_OFFSET_REG(33))
        }
        wh64    r52    /* cache line 4 */
        push_reg r33, r52
        push_reg r32, r52
        push_reg r31, r52
        .ifc \function,handle_syscall
        push_reg r30, r52, PTREGS_OFFSET_SYSCALL - PTREGS_OFFSET_REG(30)
        push_reg TREG_SYSCALL_NR_NAME, r52, \
          PTREGS_OFFSET_REG(5) - PTREGS_OFFSET_SYSCALL
        .else

        push_reg r30, r52, PTREGS_OFFSET_REG(29) - PTREGS_OFFSET_REG(30)
        wh64    r52   /* cache line 3 */
        push_reg r29, r52
        push_reg r28, r52
        push_reg r27, r52
        push_reg r26, r52
        push_reg r25, r52
        push_reg r24, r52
        push_reg r23, r52
        push_reg r22, r52
        wh64    r52   /* cache line 2 */
        push_reg r21, r52
        push_reg r20, r52
        push_reg r19, r52
        push_reg r18, r52
        push_reg r17, r52
        push_reg r16, r52
        push_reg r15, r52
        push_reg r14, r52
        wh64    r52   /* cache line 1 */
        push_reg r13, r52
        push_reg r12, r52
        push_reg r11, r52
        push_reg r10, r52
        push_reg r9, r52
        push_reg r8, r52
        push_reg r7, r52
        push_reg r6, r52

        .endif

        push_reg r5, r52
        st      r52, r4

        /*
         * If we will be returning to the kernel, we will need to
         * reset the interrupt masks to the state they had before.
         * Set DISABLE_IRQ in flags iff we came from kernel pl with
         * irqs disabled.
         */
        mfspr   r32, SPR_EX_CONTEXT_K_1
        {
         IS_KERNEL_EX1(r22, r22)
         PTREGS_PTR(r21, PTREGS_OFFSET_FLAGS)
        }
        beqzt   r32, 1f       /* zero if from user space */
        IRQS_DISABLED(r32)    /* zero if irqs enabled */
#if PT_FLAGS_DISABLE_IRQ != 1
# error Value of IRQS_DISABLED used to set PT_FLAGS_DISABLE_IRQ; fix
#endif
1:
        .ifnc \function,handle_syscall
        /* Record the fact that we saved the caller-save registers above. */
        ori     r32, r32, PT_FLAGS_CALLER_SAVES
        .endif
        st      r21, r32

        /*
         * we've captured enough state to the stack (including in
         * particular our EX_CONTEXT state) that we can now release
         * the interrupt critical section and replace it with our
         * standard "interrupts disabled" mask value.  This allows
         * synchronous interrupts (and profile interrupts) to punch
         * through from this point onwards.
         *
         * It's important that no code before this point touch memory
         * other than our own stack (to keep the invariant that this
         * is all that gets touched under ICS), and that no code after
         * this point reference any interrupt-specific SPR, in particular
         * the EX_CONTEXT_K_ values.
         */
        .ifc \function,handle_nmi
        IRQ_DISABLE_ALL(r20)
        .else
        IRQ_DISABLE(r20, r21)
        .endif
        mtspr   INTERRUPT_CRITICAL_SECTION, zero

        /* Load tp with our per-cpu offset. */
#ifdef CONFIG_SMP
        {
         mfspr  r20, SPR_SYSTEM_SAVE_K_0
         moveli r21, hw2_last(__per_cpu_offset)
        }
        {
         shl16insli r21, r21, hw1(__per_cpu_offset)
         bfextu r20, r20, CPU_SHIFT, 63
        }
        shl16insli r21, r21, hw0(__per_cpu_offset)
        shl3add r20, r20, r21
        ld      tp, r20
#else
        move    tp, zero
#endif

#ifdef __COLLECT_LINKER_FEEDBACK__
        /*
         * Notify the feedback routines that we were in the
         * appropriate fixed interrupt vector area.  Note that we
         * still have ICS set at this point, so we can't invoke any
         * atomic operations or we will panic.  The feedback
         * routines internally preserve r0..r10 and r30 up.
         */
        .ifnc \function,handle_syscall
        shli    r20, r1, 5
        .else
        moveli  r20, INT_SWINT_1 << 5
        .endif
        moveli  r21, hw2_last(intvec_feedback)
        shl16insli r21, r21, hw1(intvec_feedback)
        shl16insli r21, r21, hw0(intvec_feedback)
        add     r20, r20, r21
        jalr    r20

        /* And now notify the feedback routines that we are here. */
        FEEDBACK_ENTER(\function)
#endif

        /*
         * Prepare the first 256 stack bytes to be rapidly accessible
         * without having to fetch the background data.
         */
        addi    r52, sp, -64
        {
         wh64   r52
         addi   r52, r52, -64
        }
        {
         wh64   r52
         addi   r52, r52, -64
        }
        {
         wh64   r52
         addi   r52, r52, -64
        }
        wh64    r52

#ifdef CONFIG_TRACE_IRQFLAGS
        .ifnc \function,handle_nmi
        /*
         * We finally have enough state set up to notify the irq
         * tracing code that irqs were disabled on entry to the handler.
         * The TRACE_IRQS_OFF call clobbers registers r0-r29.
         * For syscalls, we already have the register state saved away
         * on the stack, so we don't bother to do any register saves here,
         * and later we pop the registers back off the kernel stack.
         * For interrupt handlers, save r0-r3 in callee-saved registers.
         */
        .ifnc \function,handle_syscall
        { move r30, r0; move r31, r1 }
        { move r32, r2; move r33, r3 }
        .endif
        TRACE_IRQS_OFF
        .ifnc \function,handle_syscall
        { move r0, r30; move r1, r31 }
        { move r2, r32; move r3, r33 }
        .endif
        .endif
#endif

        .endm

        /*
         * Redispatch a downcall.
         */
        .macro  dc_dispatch vecnum, vecname
        .org    (\vecnum << 8)
intvec_\vecname:
        j       _hv_downcall_dispatch
        ENDPROC(intvec_\vecname)
        .endm

        /*
         * Common code for most interrupts.  The C function we're eventually
         * going to is in r0, and the faultnum is in r1; the original
         * values for those registers are on the stack.
         */
        .pushsection .text.handle_interrupt,"ax"
handle_interrupt:
        finish_interrupt_save handle_interrupt

        /* Jump to the C routine; it should enable irqs as soon as possible. */
        {
         jalr   r0
         PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
        }
        FEEDBACK_REENTER(handle_interrupt)
        {
         movei  r30, 0   /* not an NMI */
         j      interrupt_return
        }
        STD_ENDPROC(handle_interrupt)

/*
 * This routine takes a boolean in r30 indicating if this is an NMI.
 * If so, we also expect a boolean in r31 indicating whether to
 * re-enable the oprofile interrupts.
 *
 * Note that .Lresume_userspace is jumped to directly in several
 * places, and we need to make sure r30 is set correctly in those
 * callers as well.
 */
STD_ENTRY(interrupt_return)
        /* If we're resuming to kernel space, don't check thread flags. */
        {
         bnez   r30, .Lrestore_all  /* NMIs don't special-case user-space */
         PTREGS_PTR(r29, PTREGS_OFFSET_EX1)
        }
        ld      r29, r29
        IS_KERNEL_EX1(r29, r29)
        {
         beqzt  r29, .Lresume_userspace
         move   r29, sp
        }

#ifdef CONFIG_PREEMPT
        /* Returning to kernel space. Check if we need preemption. */
        EXTRACT_THREAD_INFO(r29)
        addli   r28, r29, THREAD_INFO_FLAGS_OFFSET
        {
         ld     r28, r28
         addli  r29, r29, THREAD_INFO_PREEMPT_COUNT_OFFSET
        }
        {
         andi   r28, r28, _TIF_NEED_RESCHED
         ld4s   r29, r29
        }
        beqzt   r28, 1f
        bnez    r29, 1f
        /* Disable interrupts explicitly for preemption. */
        IRQ_DISABLE(r20,r21)
        TRACE_IRQS_OFF
        jal     preempt_schedule_irq
        FEEDBACK_REENTER(interrupt_return)
1:
#endif

        /* If we're resuming to _cpu_idle_nap, bump PC forward by 8. */
        {
         moveli r27, hw2_last(_cpu_idle_nap)
         PTREGS_PTR(r29, PTREGS_OFFSET_PC)
        }
        {
         ld     r28, r29
         shl16insli r27, r27, hw1(_cpu_idle_nap)
        }
        {
         shl16insli r27, r27, hw0(_cpu_idle_nap)
        }
        {
         cmpeq  r27, r27, r28
        }
        {
         blbc   r27, .Lrestore_all
         addi   r28, r28, 8
        }
        st      r29, r28
        j       .Lrestore_all

.Lresume_userspace:
        FEEDBACK_REENTER(interrupt_return)

        /*
         * Use r33 to hold whether we have already loaded the callee-saves
         * into ptregs.  We don't want to do it twice in this loop, since
         * then we'd clobber whatever changes are made by ptrace, etc.
         */
        {
         movei  r33, 0
         move   r32, sp
        }

        /* Get base of stack in r32. */
        EXTRACT_THREAD_INFO(r32)

.Lretry_work_pending:
        /*
         * Disable interrupts so as to make sure we don't
         * miss an interrupt that sets any of the thread flags (like
         * need_resched or sigpending) between sampling and the iret.
         * Routines like schedule() or do_signal() may re-enable
         * interrupts before returning.
         */
        IRQ_DISABLE(r20, r21)
        TRACE_IRQS_OFF  /* Note: clobbers registers r0-r29 */


        /* Check to see if there is any work to do before returning to user. */
        {
         addi   r29, r32, THREAD_INFO_FLAGS_OFFSET
         moveli r1, hw1_last(_TIF_ALLWORK_MASK)
        }
        {
         ld     r29, r29
         shl16insli r1, r1, hw0(_TIF_ALLWORK_MASK)
        }
        and     r1, r29, r1
        beqzt   r1, .Lrestore_all

        /*
         * Make sure we have all the registers saved for signal
         * handling or notify-resume.  Call out to C code to figure out
         * exactly what we need to do for each flag bit, then if
         * necessary, reload the flags and recheck.
         */
        {
         PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
         bnez   r33, 1f
        }
        push_extra_callee_saves r0
        movei   r33, 1
1:      jal     do_work_pending
        bnez    r0, .Lretry_work_pending

        /*
         * In the NMI case we
         * omit the call to single_process_check_nohz, which normally checks
         * to see if we should start or stop the scheduler tick, because
         * we can't call arbitrary Linux code from an NMI context.
         * We always call the homecache TLB deferral code to re-trigger
         * the deferral mechanism.
         *
         * The other chunk of responsibility this code has is to reset the
         * interrupt masks appropriately to reset irqs and NMIs.  We have
         * to call TRACE_IRQS_OFF and TRACE_IRQS_ON to support all the
         * lockdep-type stuff, but we can't set ICS until afterwards, since
         * ICS can only be used in very tight chunks of code to avoid
         * tripping over various assertions that it is off.
         */
.Lrestore_all:
        PTREGS_PTR(r0, PTREGS_OFFSET_EX1)
        {
         ld      r0, r0
         PTREGS_PTR(r32, PTREGS_OFFSET_FLAGS)
        }
        {
         IS_KERNEL_EX1(r0, r0)
         ld     r32, r32
        }
        bnez    r0, 1f
        j       2f
#if PT_FLAGS_DISABLE_IRQ != 1
# error Assuming PT_FLAGS_DISABLE_IRQ == 1 so we can use blbct below
#endif
1:      blbct   r32, 2f
        IRQ_DISABLE(r20,r21)
        TRACE_IRQS_OFF
        movei   r0, 1
        mtspr   INTERRUPT_CRITICAL_SECTION, r0
        beqzt   r30, .Lrestore_regs
        j       3f
2:      TRACE_IRQS_ON
        IRQ_ENABLE_LOAD(r20, r21)
        movei   r0, 1
        mtspr   INTERRUPT_CRITICAL_SECTION, r0
        IRQ_ENABLE_APPLY(r20, r21)
        beqzt   r30, .Lrestore_regs
3:

#if INT_PERF_COUNT + 1 != INT_AUX_PERF_COUNT
# error Bad interrupt assumption
#endif
        {
         movei  r0, 3   /* two adjacent bits for the PERF_COUNT mask */
         beqz   r31, .Lrestore_regs
        }
        shli    r0, r0, INT_PERF_COUNT
        mtspr   SPR_INTERRUPT_MASK_RESET_K, r0

        /*
         * We now commit to returning from this interrupt, since we will be
         * doing things like setting EX_CONTEXT SPRs and unwinding the stack
         * frame.  No calls should be made to any other code after this point.
         * This code should only be entered with ICS set.
         * r32 must still be set to ptregs.flags.
         * We launch loads to each cache line separately first, so we can
         * get some parallelism out of the memory subsystem.
         * We start zeroing caller-saved registers throughout, since
         * that will save some cycles if this turns out to be a syscall.
         */
.Lrestore_regs:

        /*
         * Rotate so we have one high bit and one low bit to test.
         * - low bit says whether to restore all the callee-saved registers,
         *   or just r30-r33, and r52 up.
         * - high bit (i.e. sign bit) says whether to restore all the
         *   caller-saved registers, or just r0.
         */
#if PT_FLAGS_CALLER_SAVES != 2 || PT_FLAGS_RESTORE_REGS != 4
# error Rotate trick does not work :-)
#endif
        {
         rotli  r20, r32, 62
         PTREGS_PTR(sp, PTREGS_OFFSET_REG(0))
        }

        /*
         * Load cache lines 0, 4, 6 and 7, in that order, then use
         * the last loaded value, which makes it likely that the other
         * cache lines have also loaded, at which point we should be
         * able to safely read all the remaining words on those cache
         * lines without waiting for the memory subsystem.
         */
        pop_reg r0, sp, PTREGS_OFFSET_REG(30) - PTREGS_OFFSET_REG(0)
        pop_reg r30, sp, PTREGS_OFFSET_REG(52) - PTREGS_OFFSET_REG(30)
        pop_reg_zero r52, r3, sp, PTREGS_OFFSET_CMPEXCH - PTREGS_OFFSET_REG(52)
        pop_reg_zero r21, r27, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_CMPEXCH
        pop_reg_zero lr, r2, sp, PTREGS_OFFSET_PC - PTREGS_OFFSET_EX1
        {
         mtspr  CMPEXCH_VALUE, r21
         move   r4, zero
        }
        pop_reg r21, sp, PTREGS_OFFSET_REG(31) - PTREGS_OFFSET_PC
        {
         mtspr  SPR_EX_CONTEXT_K_1, lr
         IS_KERNEL_EX1(lr, lr)
        }
        {
         mtspr  SPR_EX_CONTEXT_K_0, r21
         move   r5, zero
        }

        /* Restore callee-saveds that we actually use. */
        pop_reg_zero r31, r6
        pop_reg_zero r32, r7
        pop_reg_zero r33, r8, sp, PTREGS_OFFSET_REG(29) - PTREGS_OFFSET_REG(33)

        /*
         * If we modified other callee-saveds, restore them now.
         * This is rare, but could be via ptrace or signal handler.
         */
        {
         move   r9, zero
         blbs   r20, .Lrestore_callees
        }
.Lcontinue_restore_regs:

        /* Check if we're returning from a syscall. */
        {
         move   r10, zero
         bltzt  r20, 1f  /* no, so go restore callee-save registers */
        }

        /*
         * Check if we're returning to userspace.
         * Note that if we're not, we don't worry about zeroing everything.
         */
        {
         addli  sp, sp, PTREGS_OFFSET_LR - PTREGS_OFFSET_REG(29)
         bnez   lr, .Lkernel_return
        }

        /*
         * On return from syscall, we've restored r0 from pt_regs, but we
         * clear the remainder of the caller-saved registers.  We could
         * restore the syscall arguments, but there's not much point,
         * and it ensures user programs aren't trying to use the
         * caller-saves if we clear them, as well as avoiding leaking
         * kernel pointers into userspace.
         */
        pop_reg_zero lr, r11, sp, PTREGS_OFFSET_TP - PTREGS_OFFSET_LR
        pop_reg_zero tp, r12, sp, PTREGS_OFFSET_SP - PTREGS_OFFSET_TP
        {
         ld     sp, sp
         move   r13, zero
         move   r14, zero
        }
        { move r15, zero; move r16, zero }
        { move r17, zero; move r18, zero }
        { move r19, zero; move r20, zero }
        { move r21, zero; move r22, zero }
        { move r23, zero; move r24, zero }
        { move r25, zero; move r26, zero }

        /* Set r1 to errno if we are returning an error, otherwise zero. */
        {
         moveli r29, 4096
         sub    r1, zero, r0
        }
        {
         move   r28, zero
         cmpltu r29, r1, r29
        }
        {
         mnz    r1, r29, r1
         move   r29, zero
        }
        iret

        /*
         * Not a syscall, so restore caller-saved registers.
         * First kick off loads for cache lines 1-3, which we're touching
         * for the first time here.
         */
        .align 64
1:      pop_reg r29, sp, PTREGS_OFFSET_REG(21) - PTREGS_OFFSET_REG(29)
        pop_reg r21, sp, PTREGS_OFFSET_REG(13) - PTREGS_OFFSET_REG(21)
        pop_reg r13, sp, PTREGS_OFFSET_REG(1) - PTREGS_OFFSET_REG(13)
        pop_reg r1
        pop_reg r2
        pop_reg r3
        pop_reg r4
        pop_reg r5
        pop_reg r6
        pop_reg r7
        pop_reg r8
        pop_reg r9
        pop_reg r10
        pop_reg r11
        pop_reg r12, sp, 16
        /* r13 already restored above */
        pop_reg r14
        pop_reg r15
        pop_reg r16
        pop_reg r17
        pop_reg r18
        pop_reg r19
        pop_reg r20, sp, 16
        /* r21 already restored above */
        pop_reg r22
        pop_reg r23
        pop_reg r24
        pop_reg r25
        pop_reg r26
        pop_reg r27
        pop_reg r28, sp, PTREGS_OFFSET_LR - PTREGS_OFFSET_REG(28)
        /* r29 already restored above */
        bnez    lr, .Lkernel_return
        pop_reg lr, sp, PTREGS_OFFSET_TP - PTREGS_OFFSET_LR
        pop_reg tp, sp, PTREGS_OFFSET_SP - PTREGS_OFFSET_TP
        ld      sp, sp
        iret

        /*
         * We can't restore tp when in kernel mode, since a thread might
         * have migrated from another cpu and brought a stale tp value.
         */
.Lkernel_return:
        pop_reg lr, sp, PTREGS_OFFSET_SP - PTREGS_OFFSET_LR
        ld      sp, sp
        iret

        /* Restore callee-saved registers from r34 to r51. */
.Lrestore_callees:
        addli  sp, sp, PTREGS_OFFSET_REG(34) - PTREGS_OFFSET_REG(29)
        pop_reg r34
        pop_reg r35
        pop_reg r36
        pop_reg r37
        pop_reg r38
        pop_reg r39
        pop_reg r40
        pop_reg r41
        pop_reg r42
        pop_reg r43
        pop_reg r44
        pop_reg r45
        pop_reg r46
        pop_reg r47
        pop_reg r48
        pop_reg r49
        pop_reg r50
        pop_reg r51, sp, PTREGS_OFFSET_REG(29) - PTREGS_OFFSET_REG(51)
        j .Lcontinue_restore_regs
        STD_ENDPROC(interrupt_return)

        /*
         * "NMI" interrupts mask ALL interrupts before calling the
         * handler, and don't check thread flags, etc., on the way
         * back out.  In general, the only things we do here for NMIs
         * are register save/restore and dataplane kernel-TLB management.
         * We don't (for example) deal with start/stop of the sched tick.
         */
        .pushsection .text.handle_nmi,"ax"
handle_nmi:
        finish_interrupt_save handle_nmi
        {
         jalr   r0
         PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
        }
        FEEDBACK_REENTER(handle_nmi)
        {
         movei  r30, 1
         cmpeq  r31, r0, zero
        }
        j       interrupt_return
        STD_ENDPROC(handle_nmi)

        /*
         * Parallel code for syscalls to handle_interrupt.
         */
        .pushsection .text.handle_syscall,"ax"
handle_syscall:
        finish_interrupt_save handle_syscall

        /* Enable irqs. */
        TRACE_IRQS_ON
        IRQ_ENABLE(r20, r21)

        /* Bump the counter for syscalls made on this tile. */
        moveli r20, hw2_last(irq_stat + IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET)
        shl16insli r20, r20, hw1(irq_stat + IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET)
        shl16insli r20, r20, hw0(irq_stat + IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET)
        add     r20, r20, tp
        ld4s    r21, r20
        {
         addi   r21, r21, 1
         move   r31, sp
        }
        {
         st4    r20, r21
         EXTRACT_THREAD_INFO(r31)
        }

        /* Trace syscalls, if requested. */
        addi    r31, r31, THREAD_INFO_FLAGS_OFFSET
        {
         ld     r30, r31
         moveli r32, _TIF_SYSCALL_ENTRY_WORK
        }
        and     r30, r30, r32
        {
         addi   r30, r31, THREAD_INFO_STATUS_OFFSET - THREAD_INFO_FLAGS_OFFSET
         beqzt  r30, .Lrestore_syscall_regs
        }
        {
         PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
         jal    do_syscall_trace_enter
        }
        FEEDBACK_REENTER(handle_syscall)

        /*
         * We always reload our registers from the stack at this
         * point.  They might be valid, if we didn't build with
         * TRACE_IRQFLAGS, and this isn't a dataplane tile, and we're not
         * doing syscall tracing, but there are enough cases now that it
         * seems simplest just to do the reload unconditionally.
         */
.Lrestore_syscall_regs:
        {
         ld     r30, r30
         PTREGS_PTR(r11, PTREGS_OFFSET_REG(0))
        }
        pop_reg r0,  r11
        pop_reg r1,  r11
        pop_reg r2,  r11
        pop_reg r3,  r11
        pop_reg r4,  r11
        pop_reg r5,  r11, PTREGS_OFFSET_SYSCALL - PTREGS_OFFSET_REG(5)
        {
         ld     TREG_SYSCALL_NR_NAME, r11
         moveli r21, __NR_syscalls
        }

        /* Ensure that the syscall number is within the legal range. */
        {
         moveli r20, hw2(sys_call_table)
#ifdef CONFIG_COMPAT
         blbs   r30, .Lcompat_syscall
#endif
        }
        {
         cmpltu r21, TREG_SYSCALL_NR_NAME, r21
         shl16insli r20, r20, hw1(sys_call_table)
        }
        {
         blbc   r21, .Linvalid_syscall
         shl16insli r20, r20, hw0(sys_call_table)
        }
.Lload_syscall_pointer:
        shl3add r20, TREG_SYSCALL_NR_NAME, r20
        ld      r20, r20

        /* Jump to syscall handler. */
        jalr    r20
.Lhandle_syscall_link: /* value of "lr" after "jalr r20" above */

        /*
         * Write our r0 onto the stack so it gets restored instead
         * of whatever the user had there before.
         * In compat mode, sign-extend r0 before storing it.
         */
        {
         PTREGS_PTR(r29, PTREGS_OFFSET_REG(0))
         blbct  r30, 1f
        }
        addxi   r0, r0, 0
1:      st      r29, r0

.Lsyscall_sigreturn_skip:
        FEEDBACK_REENTER(handle_syscall)

        /* Do syscall trace again, if requested. */
        {
         ld      r30, r31
         moveli  r32, _TIF_SYSCALL_EXIT_WORK
        }
        and      r0, r30, r32
        {
         andi    r0, r30, _TIF_SINGLESTEP
         beqzt   r0, 1f
        }
        {
         PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
         jal    do_syscall_trace_exit
        }
        FEEDBACK_REENTER(handle_syscall)
        andi    r0, r30, _TIF_SINGLESTEP

1:      beqzt   r0, 2f

        /* Single stepping -- notify ptrace. */
        {
         movei   r0, SIGTRAP
         jal     ptrace_notify
        }
        FEEDBACK_REENTER(handle_syscall)

2:      {
         movei  r30, 0               /* not an NMI */
         j      .Lresume_userspace   /* jump into middle of interrupt_return */
        }

#ifdef CONFIG_COMPAT
.Lcompat_syscall:
        /*
         * Load the base of the compat syscall table in r20, and
         * range-check the syscall number (duplicated from 64-bit path).
         * Sign-extend all the user's passed arguments to make them consistent.
         * Also save the original "r(n)" values away in "r(11+n)" in
         * case the syscall table entry wants to validate them.
         */
        moveli  r20, hw2(compat_sys_call_table)
        {
         cmpltu r21, TREG_SYSCALL_NR_NAME, r21
         shl16insli r20, r20, hw1(compat_sys_call_table)
        }
        {
         blbc   r21, .Linvalid_syscall
         shl16insli r20, r20, hw0(compat_sys_call_table)
        }
        { move r11, r0; addxi r0, r0, 0 }
        { move r12, r1; addxi r1, r1, 0 }
        { move r13, r2; addxi r2, r2, 0 }
        { move r14, r3; addxi r3, r3, 0 }
        { move r15, r4; addxi r4, r4, 0 }
        { move r16, r5; addxi r5, r5, 0 }
        j .Lload_syscall_pointer
#endif

.Linvalid_syscall:
        /* Report an invalid syscall back to the user program */
        {
         PTREGS_PTR(r29, PTREGS_OFFSET_REG(0))
         movei  r28, -ENOSYS
        }
        st      r29, r28
        {
         movei  r30, 0               /* not an NMI */
         j      .Lresume_userspace   /* jump into middle of interrupt_return */
        }
        STD_ENDPROC(handle_syscall)

        /* Return the address for oprofile to suppress in backtraces. */
STD_ENTRY_SECTION(handle_syscall_link_address, .text.handle_syscall)
        lnk     r0
        {
         addli  r0, r0, .Lhandle_syscall_link - .
         jrp    lr
        }
        STD_ENDPROC(handle_syscall_link_address)

STD_ENTRY(ret_from_fork)
        jal     sim_notify_fork
        jal     schedule_tail
        FEEDBACK_REENTER(ret_from_fork)
        {
         movei  r30, 0               /* not an NMI */
         j      .Lresume_userspace   /* jump into middle of interrupt_return */
        }
        STD_ENDPROC(ret_from_fork)

STD_ENTRY(ret_from_kernel_thread)
        jal     sim_notify_fork
        jal     schedule_tail
        FEEDBACK_REENTER(ret_from_fork)
        {
         move   r0, r31
         jalr   r30
        }
        FEEDBACK_REENTER(ret_from_kernel_thread)
        {
         movei  r30, 0               /* not an NMI */
         j      .Lresume_userspace   /* jump into middle of interrupt_return */
        }
        STD_ENDPROC(ret_from_kernel_thread)

/* Various stub interrupt handlers and syscall handlers */

STD_ENTRY_LOCAL(_kernel_double_fault)
        mfspr   r1, SPR_EX_CONTEXT_K_0
        move    r2, lr
        move    r3, sp
        move    r4, r52
        addi    sp, sp, -C_ABI_SAVE_AREA_SIZE
        j       kernel_double_fault
        STD_ENDPROC(_kernel_double_fault)

STD_ENTRY_LOCAL(bad_intr)
        mfspr   r2, SPR_EX_CONTEXT_K_0
        panic   "Unhandled interrupt %#x: PC %#lx"
        STD_ENDPROC(bad_intr)

/*
 * Special-case sigreturn to not write r0 to the stack on return.
 * This is technically more efficient, but it also avoids difficulties
 * in the 64-bit OS when handling 32-bit compat code, since we must not
 * sign-extend r0 for the sigreturn return-value case.
 */
#define PTREGS_SYSCALL_SIGRETURN(x, reg)                \
        STD_ENTRY(_##x);                                \
        addli   lr, lr, .Lsyscall_sigreturn_skip - .Lhandle_syscall_link; \
        {                                               \
         PTREGS_PTR(reg, PTREGS_OFFSET_BASE);           \
         j      x                                       \
        };                                              \
        STD_ENDPROC(_##x)

PTREGS_SYSCALL_SIGRETURN(sys_rt_sigreturn, r0)
#ifdef CONFIG_COMPAT
PTREGS_SYSCALL_SIGRETURN(compat_sys_rt_sigreturn, r0)
#endif

/* Save additional callee-saves to pt_regs and jump to standard function. */
STD_ENTRY(_sys_clone)
        push_extra_callee_saves r4
        j       sys_clone
        STD_ENDPROC(_sys_clone)

        /*
         * Recover r3, r2, r1 and r0 here saved by unalign fast vector.
         * The vector area limit is 32 bundles, so we handle the reload here.
         * r0, r1, r2 are in thread_info from low to high memory in order.
         * r3 points to location the original r3 was saved.
         * We put this code in the __HEAD section so it can be reached
         * via a conditional branch from the fast path.
         */
        __HEAD
hand_unalign_slow:
        andi    sp, sp, ~1
hand_unalign_slow_badsp:
        addi    r3, r3, -(3 * 8)
        ld_add  r0, r3, 8
        ld_add  r1, r3, 8
        ld      r2, r3
hand_unalign_slow_nonuser:
        mfspr   r3, SPR_SYSTEM_SAVE_K_1
        __int_hand     INT_UNALIGN_DATA, UNALIGN_DATA_SLOW, int_unalign

/* The unaligned data support needs to read all the registers. */
int_unalign:
        push_extra_callee_saves r0
        j       do_unaligned
ENDPROC(hand_unalign_slow)

/* Fill the return address stack with nonzero entries. */
STD_ENTRY(fill_ra_stack)
        {
         move   r0, lr
         jal    1f
        }
1:      jal     2f
2:      jal     3f
3:      jal     4f
4:      jrp     r0
        STD_ENDPROC(fill_ra_stack)

        .macro int_hand  vecnum, vecname, c_routine, processing=handle_interrupt
        .org   (\vecnum << 8)
                __int_hand   \vecnum, \vecname, \c_routine, \processing
        .endm

/* Include .intrpt array of interrupt vectors */
        .section ".intrpt", "ax"
        .global intrpt_start
intrpt_start:

#ifndef CONFIG_USE_PMC
#define handle_perf_interrupt bad_intr
#endif

#ifndef CONFIG_HARDWALL
#define do_hardwall_trap bad_intr
#endif

        int_hand     INT_MEM_ERROR, MEM_ERROR, do_trap
        int_hand     INT_SINGLE_STEP_3, SINGLE_STEP_3, bad_intr
#if CONFIG_KERNEL_PL == 2
        int_hand     INT_SINGLE_STEP_2, SINGLE_STEP_2, gx_singlestep_handle
        int_hand     INT_SINGLE_STEP_1, SINGLE_STEP_1, bad_intr
#else
        int_hand     INT_SINGLE_STEP_2, SINGLE_STEP_2, bad_intr
        int_hand     INT_SINGLE_STEP_1, SINGLE_STEP_1, gx_singlestep_handle
#endif
        int_hand     INT_SINGLE_STEP_0, SINGLE_STEP_0, bad_intr
        int_hand     INT_IDN_COMPLETE, IDN_COMPLETE, bad_intr
        int_hand     INT_UDN_COMPLETE, UDN_COMPLETE, bad_intr
        int_hand     INT_ITLB_MISS, ITLB_MISS, do_page_fault
        int_hand     INT_ILL, ILL, do_trap
        int_hand     INT_GPV, GPV, do_trap
        int_hand     INT_IDN_ACCESS, IDN_ACCESS, do_trap
        int_hand     INT_UDN_ACCESS, UDN_ACCESS, do_trap
        int_hand     INT_SWINT_3, SWINT_3, do_trap
        int_hand     INT_SWINT_2, SWINT_2, do_trap
        int_hand     INT_SWINT_1, SWINT_1, SYSCALL, handle_syscall
        int_hand     INT_SWINT_0, SWINT_0, do_trap
        int_hand     INT_ILL_TRANS, ILL_TRANS, do_trap
        int_hand_unalign_fast INT_UNALIGN_DATA, UNALIGN_DATA
        int_hand     INT_DTLB_MISS, DTLB_MISS, do_page_fault
        int_hand     INT_DTLB_ACCESS, DTLB_ACCESS, do_page_fault
        int_hand     INT_IDN_FIREWALL, IDN_FIREWALL, do_hardwall_trap
        int_hand     INT_UDN_FIREWALL, UDN_FIREWALL, do_hardwall_trap
        int_hand     INT_TILE_TIMER, TILE_TIMER, do_timer_interrupt
        int_hand     INT_IDN_TIMER, IDN_TIMER, bad_intr
        int_hand     INT_UDN_TIMER, UDN_TIMER, bad_intr
        int_hand     INT_IDN_AVAIL, IDN_AVAIL, bad_intr
        int_hand     INT_UDN_AVAIL, UDN_AVAIL, bad_intr
        int_hand     INT_IPI_3, IPI_3, bad_intr
#if CONFIG_KERNEL_PL == 2
        int_hand     INT_IPI_2, IPI_2, tile_dev_intr
        int_hand     INT_IPI_1, IPI_1, bad_intr
#else
        int_hand     INT_IPI_2, IPI_2, bad_intr
        int_hand     INT_IPI_1, IPI_1, tile_dev_intr
#endif
        int_hand     INT_IPI_0, IPI_0, bad_intr
        int_hand     INT_PERF_COUNT, PERF_COUNT, \
                     handle_perf_interrupt, handle_nmi
        int_hand     INT_AUX_PERF_COUNT, AUX_PERF_COUNT, \
                     handle_perf_interrupt, handle_nmi
        int_hand     INT_INTCTRL_3, INTCTRL_3, bad_intr
#if CONFIG_KERNEL_PL == 2
        dc_dispatch  INT_INTCTRL_2, INTCTRL_2
        int_hand     INT_INTCTRL_1, INTCTRL_1, bad_intr
#else
        int_hand     INT_INTCTRL_2, INTCTRL_2, bad_intr
        dc_dispatch  INT_INTCTRL_1, INTCTRL_1
#endif
        int_hand     INT_INTCTRL_0, INTCTRL_0, bad_intr
        int_hand     INT_MESSAGE_RCV_DWNCL, MESSAGE_RCV_DWNCL, \
                     hv_message_intr
        int_hand     INT_DEV_INTR_DWNCL, DEV_INTR_DWNCL, bad_intr
        int_hand     INT_I_ASID, I_ASID, bad_intr
        int_hand     INT_D_ASID, D_ASID, bad_intr
        int_hand     INT_DOUBLE_FAULT, DOUBLE_FAULT, do_trap

        /* Synthetic interrupt delivered only by the simulator */
        int_hand     INT_BREAKPOINT, BREAKPOINT, do_breakpoint