arch/tile: improve support for PCI hotplug

[deliverable/linux.git] / arch / tile / kernel / pci.c

/*
 * Copyright 2011 Tilera Corporation. All Rights Reserved.
 *
 *   This program is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU General Public License
 *   as published by the Free Software Foundation, version 2.
 *
 *   This program is distributed in the hope that it will be useful, but
 *   WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
 *   NON INFRINGEMENT.  See the GNU General Public License for
 *   more details.
 */

#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/capability.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/bootmem.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/uaccess.h>

#include <asm/processor.h>
#include <asm/sections.h>
#include <asm/byteorder.h>
#include <asm/hv_driver.h>
#include <hv/drv_pcie_rc_intf.h>


/*
 * Initialization flow and process
 * -------------------------------
 *
 * This files contains the routines to search for PCI buses,
 * enumerate the buses, and configure any attached devices.
 *
 * There are two entry points here:
 * 1) tile_pci_init
 *    This sets up the pci_controller structs, and opens the
 *    FDs to the hypervisor.  This is called from setup_arch() early
 *    in the boot process.
 * 2) pcibios_init
 *    This probes the PCI bus(es) for any attached hardware.  It's
 *    called by subsys_initcall.  All of the real work is done by the
 *    generic Linux PCI layer.
 *
 */

/*
 * This flag tells if the platform is TILEmpower that needs
 * special configuration for the PLX switch chip.
 */
int __write_once tile_plx_gen1;

static struct pci_controller controllers[TILE_NUM_PCIE];
static int num_controllers;
static int pci_scan_flags[TILE_NUM_PCIE];

static struct pci_ops tile_cfg_ops;


/*
 * We don't need to worry about the alignment of resources.
 */
resource_size_t pcibios_align_resource(void *data, const struct resource *res,
                            resource_size_t size, resource_size_t align)
{
        return res->start;
}
EXPORT_SYMBOL(pcibios_align_resource);

/*
 * Open a FD to the hypervisor PCI device.
 *
 * controller_id is the controller number, config type is 0 or 1 for
 * config0 or config1 operations.
 */
static int __devinit tile_pcie_open(int controller_id, int config_type)
{
        char filename[32];
        int fd;

        sprintf(filename, "pcie/%d/config%d", controller_id, config_type);

        fd = hv_dev_open((HV_VirtAddr)filename, 0);

        return fd;
}


/*
 * Get the IRQ numbers from the HV and set up the handlers for them.
 */
static int __devinit tile_init_irqs(int controller_id,
                                 struct pci_controller *controller)
{
        char filename[32];
        int fd;
        int ret;
        int x;
        struct pcie_rc_config rc_config;

        sprintf(filename, "pcie/%d/ctl", controller_id);
        fd = hv_dev_open((HV_VirtAddr)filename, 0);
        if (fd < 0) {
                pr_err("PCI: hv_dev_open(%s) failed\n", filename);
                return -1;
        }
        ret = hv_dev_pread(fd, 0, (HV_VirtAddr)(&rc_config),
                           sizeof(rc_config), PCIE_RC_CONFIG_MASK_OFF);
        hv_dev_close(fd);
        if (ret != sizeof(rc_config)) {
                pr_err("PCI: wanted %zd bytes, got %d\n",
                       sizeof(rc_config), ret);
                return -1;
        }
        /* Record irq_base so that we can map INTx to IRQ # later. */
        controller->irq_base = rc_config.intr;

        for (x = 0; x < 4; x++)
                tile_irq_activate(rc_config.intr + x,
                                  TILE_IRQ_HW_CLEAR);

        if (rc_config.plx_gen1)
                controller->plx_gen1 = 1;

        return 0;
}

/*
 * First initialization entry point, called from setup_arch().
 *
 * Find valid controllers and fill in pci_controller structs for each
 * of them.
 *
 * Returns the number of controllers discovered.
 */
int __devinit tile_pci_init(void)
{
        int i;

        pr_info("PCI: Searching for controllers...\n");

        /* Re-init number of PCIe controllers to support hot-plug feature. */
        num_controllers = 0;

        /* Do any configuration we need before using the PCIe */

        for (i = 0; i < TILE_NUM_PCIE; i++) {
                /*
                 * To see whether we need a real config op based on
                 * the results of pcibios_init(), to support PCIe hot-plug.
                 */
                if (pci_scan_flags[i] == 0) {
                        int hv_cfg_fd0 = -1;
                        int hv_cfg_fd1 = -1;
                        int hv_mem_fd = -1;
                        char name[32];
                        struct pci_controller *controller;

                        /*
                         * Open the fd to the HV.  If it fails then this
                         * device doesn't exist.
                         */
                        hv_cfg_fd0 = tile_pcie_open(i, 0);
                        if (hv_cfg_fd0 < 0)
                                continue;
                        hv_cfg_fd1 = tile_pcie_open(i, 1);
                        if (hv_cfg_fd1 < 0) {
                                pr_err("PCI: Couldn't open config fd to HV "
                                    "for controller %d\n", i);
                                goto err_cont;
                        }

                        sprintf(name, "pcie/%d/mem", i);
                        hv_mem_fd = hv_dev_open((HV_VirtAddr)name, 0);
                        if (hv_mem_fd < 0) {
                                pr_err("PCI: Could not open mem fd to HV!\n");
                                goto err_cont;
                        }

                        pr_info("PCI: Found PCI controller #%d\n", i);

                        controller = &controllers[i];

                        if (tile_init_irqs(i, controller)) {
                                pr_err("PCI: Could not initialize "
                                       "IRQs, aborting.\n");
                                goto err_cont;
                        }

                        controller->index = i;
                        controller->hv_cfg_fd[0] = hv_cfg_fd0;
                        controller->hv_cfg_fd[1] = hv_cfg_fd1;
                        controller->hv_mem_fd = hv_mem_fd;
                        controller->first_busno = 0;
                        controller->last_busno = 0xff;
                        controller->ops = &tile_cfg_ops;

                        num_controllers++;
                        continue;

err_cont:
                        if (hv_cfg_fd0 >= 0)
                                hv_dev_close(hv_cfg_fd0);
                        if (hv_cfg_fd1 >= 0)
                                hv_dev_close(hv_cfg_fd1);
                        if (hv_mem_fd >= 0)
                                hv_dev_close(hv_mem_fd);
                        continue;
                }
        }

        /*
         * Before using the PCIe, see if we need to do any platform-specific
         * configuration, such as the PLX switch Gen 1 issue on TILEmpower.
         */
        for (i = 0; i < num_controllers; i++) {
                struct pci_controller *controller = &controllers[i];

                if (controller->plx_gen1)
                        tile_plx_gen1 = 1;
        }

        return num_controllers;
}

/*
 * (pin - 1) converts from the PCI standard's [1:4] convention to
 * a normal [0:3] range.
 */
static int tile_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
        struct pci_controller *controller =
                (struct pci_controller *)dev->sysdata;
        return (pin - 1) + controller->irq_base;
}


static void __devinit fixup_read_and_payload_sizes(void)
{
        struct pci_dev *dev = NULL;
        int smallest_max_payload = 0x1; /* Tile maxes out at 256 bytes. */
        int max_read_size = 0x2; /* Limit to 512 byte reads. */
        u16 new_values;

        /* Scan for the smallest maximum payload size. */
        while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
                int pcie_caps_offset;
                u32 devcap;
                int max_payload;

                pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP);
                if (pcie_caps_offset == 0)
                        continue;

                pci_read_config_dword(dev, pcie_caps_offset + PCI_EXP_DEVCAP,
                                      &devcap);
                max_payload = devcap & PCI_EXP_DEVCAP_PAYLOAD;
                if (max_payload < smallest_max_payload)
                        smallest_max_payload = max_payload;
        }

        /* Now, set the max_payload_size for all devices to that value. */
        new_values = (max_read_size << 12) | (smallest_max_payload << 5);
        while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
                int pcie_caps_offset;
                u16 devctl;

                pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP);
                if (pcie_caps_offset == 0)
                        continue;

                pci_read_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL,
                                     &devctl);
                devctl &= ~(PCI_EXP_DEVCTL_PAYLOAD | PCI_EXP_DEVCTL_READRQ);
                devctl |= new_values;
                pci_write_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL,
                                      devctl);
        }
}


/*
 * Second PCI initialization entry point, called by subsys_initcall.
 *
 * The controllers have been set up by the time we get here, by a call to
 * tile_pci_init.
 */
int __devinit pcibios_init(void)
{
        int i;

        pr_info("PCI: Probing PCI hardware\n");

        /*
         * Delay a bit in case devices aren't ready.  Some devices are
         * known to require at least 20ms here, but we use a more
         * conservative value.
         */
        mdelay(250);

        /* Scan all of the recorded PCI controllers.  */
        for (i = 0; i < TILE_NUM_PCIE; i++) {
                /*
                 * Do real pcibios init ops if the controller is initialized
                 * by tile_pci_init() successfully and not initialized by
                 * pcibios_init() yet to support PCIe hot-plug.
                 */
                if (pci_scan_flags[i] == 0 && controllers[i].ops != NULL) {
                        struct pci_controller *controller = &controllers[i];
                        struct pci_bus *bus;

                        pr_info("PCI: initializing controller #%d\n", i);

                        /*
                         * This comes from the generic Linux PCI driver.
                         *
                         * It reads the PCI tree for this bus into the Linux
                         * data structures.
                         *
                         * This is inlined in linux/pci.h and calls into
                         * pci_scan_bus_parented() in probe.c.
                         */
                        bus = pci_scan_bus(0, controller->ops, controller);
                        controller->root_bus = bus;
                        controller->last_busno = bus->subordinate;
                }
        }

        /* Do machine dependent PCI interrupt routing */
        pci_fixup_irqs(pci_common_swizzle, tile_map_irq);

        /*
         * This comes from the generic Linux PCI driver.
         *
         * It allocates all of the resources (I/O memory, etc)
         * associated with the devices read in above.
         */
        pci_assign_unassigned_resources();

        /* Configure the max_read_size and max_payload_size values. */
        fixup_read_and_payload_sizes();

        /* Record the I/O resources in the PCI controller structure. */
        for (i = 0; i < TILE_NUM_PCIE; i++) {
                /*
                 * Do real pcibios init ops if the controller is initialized
                 * by tile_pci_init() successfully and not initialized by
                 * pcibios_init() yet to support PCIe hot-plug.
                 */
                if (pci_scan_flags[i] == 0 && controllers[i].ops != NULL) {
                        struct pci_bus *root_bus = controllers[i].root_bus;
                        struct pci_bus *next_bus;
                        struct pci_dev *dev;

                        list_for_each_entry(dev, &root_bus->devices, bus_list) {
                                /*
                                 * Find the PCI host controller, ie. the 1st
                                 * bridge.
                                 */
                                if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
                                        (PCI_SLOT(dev->devfn) == 0)) {
                                        next_bus = dev->subordinate;
                                        controllers[i].mem_resources[0] =
                                                *next_bus->resource[0];
                                        controllers[i].mem_resources[1] =
                                                 *next_bus->resource[1];
                                        controllers[i].mem_resources[2] =
                                                 *next_bus->resource[2];

                                        /* Setup flags. */
                                        pci_scan_flags[i] = 1;

                                        break;
                                }
                        }
                }
        }

        return 0;
}
subsys_initcall(pcibios_init);

/*
 * No bus fixups needed.
 */
void __devinit pcibios_fixup_bus(struct pci_bus *bus)
{
        /* Nothing needs to be done. */
}

/*
 * This can be called from the generic PCI layer, but doesn't need to
 * do anything.
 */
char __devinit *pcibios_setup(char *str)
{
        /* Nothing needs to be done. */
        return str;
}

/*
 * This is called from the generic Linux layer.
 */
void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
{
        pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
}

/*
 * Enable memory and/or address decoding, as appropriate, for the
 * device described by the 'dev' struct.
 *
 * This is called from the generic PCI layer, and can be called
 * for bridges or endpoints.
 */
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
        u16 cmd, old_cmd;
        u8 header_type;
        int i;
        struct resource *r;

        pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);

        pci_read_config_word(dev, PCI_COMMAND, &cmd);
        old_cmd = cmd;
        if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
                /*
                 * For bridges, we enable both memory and I/O decoding
                 * in call cases.
                 */
                cmd |= PCI_COMMAND_IO;
                cmd |= PCI_COMMAND_MEMORY;
        } else {
                /*
                 * For endpoints, we enable memory and/or I/O decoding
                 * only if they have a memory resource of that type.
                 */
                for (i = 0; i < 6; i++) {
                        r = &dev->resource[i];
                        if (r->flags & IORESOURCE_UNSET) {
                                pr_err("PCI: Device %s not available "
                                       "because of resource collisions\n",
                                       pci_name(dev));
                                return -EINVAL;
                        }
                        if (r->flags & IORESOURCE_IO)
                                cmd |= PCI_COMMAND_IO;
                        if (r->flags & IORESOURCE_MEM)
                                cmd |= PCI_COMMAND_MEMORY;
                }
        }

        /*
         * We only write the command if it changed.
         */
        if (cmd != old_cmd)
                pci_write_config_word(dev, PCI_COMMAND, cmd);
        return 0;
}

void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
{
        unsigned long start = pci_resource_start(dev, bar);
        unsigned long len = pci_resource_len(dev, bar);
        unsigned long flags = pci_resource_flags(dev, bar);

        if (!len)
                return NULL;
        if (max && len > max)
                len = max;

        if (!(flags & IORESOURCE_MEM)) {
                pr_info("PCI: Trying to map invalid resource %#lx\n", flags);
                start = 0;
        }

        return (void __iomem *)start;
}
EXPORT_SYMBOL(pci_iomap);


/****************************************************************
 *
 * Tile PCI config space read/write routines
 *
 ****************************************************************/

/*
 * These are the normal read and write ops
 * These are expanded with macros from  pci_bus_read_config_byte() etc.
 *
 * devfn is the combined PCI slot & function.
 *
 * offset is in bytes, from the start of config space for the
 * specified bus & slot.
 */

static int __devinit tile_cfg_read(struct pci_bus *bus,
                                   unsigned int devfn,
                                   int offset,
                                   int size,
                                   u32 *val)
{
        struct pci_controller *controller = bus->sysdata;
        int busnum = bus->number & 0xff;
        int slot = (devfn >> 3) & 0x1f;
        int function = devfn & 0x7;
        u32 addr;
        int config_mode = 1;

        /*
         * There is no bridge between the Tile and bus 0, so we
         * use config0 to talk to bus 0.
         *
         * If we're talking to a bus other than zero then we
         * must have found a bridge.
         */
        if (busnum == 0) {
                /*
                 * We fake an empty slot for (busnum == 0) && (slot > 0),
                 * since there is only one slot on bus 0.
                 */
                if (slot) {
                        *val = 0xFFFFFFFF;
                        return 0;
                }
                config_mode = 0;
        }

        addr = busnum << 20;            /* Bus in 27:20 */
        addr |= slot << 15;             /* Slot (device) in 19:15 */
        addr |= function << 12;         /* Function is in 14:12 */
        addr |= (offset & 0xFFF);       /* byte address in 0:11 */

        return hv_dev_pread(controller->hv_cfg_fd[config_mode], 0,
                            (HV_VirtAddr)(val), size, addr);
}


/*
 * See tile_cfg_read() for relevant comments.
 * Note that "val" is the value to write, not a pointer to that value.
 */
static int __devinit tile_cfg_write(struct pci_bus *bus,
                                    unsigned int devfn,
                                    int offset,
                                    int size,
                                    u32 val)
{
        struct pci_controller *controller = bus->sysdata;
        int busnum = bus->number & 0xff;
        int slot = (devfn >> 3) & 0x1f;
        int function = devfn & 0x7;
        u32 addr;
        int config_mode = 1;
        HV_VirtAddr valp = (HV_VirtAddr)&val;

        /*
         * For bus 0 slot 0 we use config 0 accesses.
         */
        if (busnum == 0) {
                /*
                 * We fake an empty slot for (busnum == 0) && (slot > 0),
                 * since there is only one slot on bus 0.
                 */
                if (slot)
                        return 0;
                config_mode = 0;
        }

        addr = busnum << 20;            /* Bus in 27:20 */
        addr |= slot << 15;             /* Slot (device) in 19:15 */
        addr |= function << 12;         /* Function is in 14:12 */
        addr |= (offset & 0xFFF);       /* byte address in 0:11 */

#ifdef __BIG_ENDIAN
        /* Point to the correct part of the 32-bit "val". */
        valp += 4 - size;
#endif

        return hv_dev_pwrite(controller->hv_cfg_fd[config_mode], 0,
                             valp, size, addr);
}


static struct pci_ops tile_cfg_ops = {
        .read =         tile_cfg_read,
        .write =        tile_cfg_write,
};


/*
 * In the following, each PCI controller's mem_resources[1]
 * represents its (non-prefetchable) PCI memory resource.
 * mem_resources[0] and mem_resources[2] refer to its PCI I/O and
 * prefetchable PCI memory resources, respectively.
 * For more details, see pci_setup_bridge() in setup-bus.c.
 * By comparing the target PCI memory address against the
 * end address of controller 0, we can determine the controller
 * that should accept the PCI memory access.
 */
#define TILE_READ(size, type)                                           \
type _tile_read##size(unsigned long addr)                               \
{                                                                       \
        type val;                                                       \
        int idx = 0;                                                    \
        if (addr > controllers[0].mem_resources[1].end &&               \
            addr > controllers[0].mem_resources[2].end)                 \
                idx = 1;                                                \
        if (hv_dev_pread(controllers[idx].hv_mem_fd, 0,                 \
                         (HV_VirtAddr)(&val), sizeof(type), addr))      \
                pr_err("PCI: read %zd bytes at 0x%lX failed\n",         \
                       sizeof(type), addr);                             \
        return val;                                                     \
}                                                                       \
EXPORT_SYMBOL(_tile_read##size)

TILE_READ(b, u8);
TILE_READ(w, u16);
TILE_READ(l, u32);
TILE_READ(q, u64);

#define TILE_WRITE(size, type)                                          \
void _tile_write##size(type val, unsigned long addr)                    \
{                                                                       \
        int idx = 0;                                                    \
        if (addr > controllers[0].mem_resources[1].end &&               \
            addr > controllers[0].mem_resources[2].end)                 \
                idx = 1;                                                \
        if (hv_dev_pwrite(controllers[idx].hv_mem_fd, 0,                \
                          (HV_VirtAddr)(&val), sizeof(type), addr))     \
                pr_err("PCI: write %zd bytes at 0x%lX failed\n",        \
                       sizeof(type), addr);                             \
}                                                                       \
EXPORT_SYMBOL(_tile_write##size)

TILE_WRITE(b, u8);
TILE_WRITE(w, u16);
TILE_WRITE(l, u32);
TILE_WRITE(q, u64);