2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
6 * SGI UV architectural definitions
8 * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
11 #ifndef _ASM_X86_UV_UV_HUB_H
12 #define _ASM_X86_UV_UV_HUB_H
15 #include <linux/numa.h>
16 #include <linux/percpu.h>
17 #include <linux/timer.h>
18 #include <asm/types.h>
19 #include <asm/percpu.h>
20 #include <asm/uv/uv_mmrs.h>
24 * Addressing Terminology
26 * M - The low M bits of a physical address represent the offset
27 * into the blade local memory. RAM memory on a blade is physically
28 * contiguous (although various IO spaces may punch holes in
31 * N - Number of bits in the node portion of a socket physical
34 * NASID - network ID of a router, Mbrick or Cbrick. Nasid values of
35 * routers always have low bit of 1, C/MBricks have low bit
36 * equal to 0. Most addressing macros that target UV hub chips
37 * right shift the NASID by 1 to exclude the always-zero bit.
38 * NASIDs contain up to 15 bits.
40 * GNODE - NASID right shifted by 1 bit. Most mmrs contain gnodes instead
43 * PNODE - the low N bits of the GNODE. The PNODE is the most useful variant
44 * of the nasid for socket usage.
47 * NumaLink Global Physical Address Format:
48 * +--------------------------------+---------------------+
49 * |00..000| GNODE | NodeOffset |
50 * +--------------------------------+---------------------+
51 * |<-------53 - M bits --->|<--------M bits ----->
53 * M - number of node offset bits (35 .. 40)
56 * Memory/UV-HUB Processor Socket Address Format:
57 * +----------------+---------------+---------------------+
58 * |00..000000000000| PNODE | NodeOffset |
59 * +----------------+---------------+---------------------+
60 * <--- N bits --->|<--------M bits ----->
62 * M - number of node offset bits (35 .. 40)
63 * N - number of PNODE bits (0 .. 10)
65 * Note: M + N cannot currently exceed 44 (x86_64) or 46 (IA64).
66 * The actual values are configuration dependent and are set at
67 * boot time. M & N values are set by the hardware/BIOS at boot.
71 * NOTE!!!!!! This is the current format of the APICID. However, code
72 * should assume that this will change in the future. Use functions
73 * in this file for all APICID bit manipulations and conversion.
81 * l = socket number on board
84 * s = bits that are in the SOCKET_ID CSR
86 * Note: Processor only supports 12 bits in the APICID register. The ACPI
87 * tables hold all 16 bits. Software needs to be aware of this.
89 * Unless otherwise specified, all references to APICID refer to
90 * the FULL value contained in ACPI tables, not the subset in the
91 * processor APICID register.
96 * Maximum number of bricks in all partitions and in all coherency domains.
97 * This is the total number of bricks accessible in the numalink fabric. It
98 * includes all C & M bricks. Routers are NOT included.
100 * This value is also the value of the maximum number of non-router NASIDs
101 * in the numalink fabric.
103 * NOTE: a brick may contain 1 or 2 OS nodes. Don't get these confused.
105 #define UV_MAX_NUMALINK_BLADES 16384
108 * Maximum number of C/Mbricks within a software SSI (hardware may support
111 #define UV_MAX_SSI_BLADES 256
114 * The largest possible NASID of a C or M brick (+ 2)
116 #define UV_MAX_NASID_VALUE (UV_MAX_NUMALINK_NODES * 2)
119 struct timer_list timer
;
120 unsigned long offset
;
122 unsigned long idle_on
;
123 unsigned long idle_off
;
125 unsigned char enabled
;
129 * The following defines attributes of the HUB chip. These attributes are
130 * frequently referenced and are kept in the per-cpu data areas of each cpu.
131 * They are kept together in a struct to minimize cache misses.
133 struct uv_hub_info_s
{
134 unsigned long global_mmr_base
;
135 unsigned long gpa_mask
;
136 unsigned long gnode_upper
;
137 unsigned long lowmem_remap_top
;
138 unsigned long lowmem_remap_base
;
139 unsigned short pnode
;
140 unsigned short pnode_mask
;
141 unsigned short coherency_domain_number
;
142 unsigned short numa_blade_id
;
143 unsigned char blade_processor_id
;
146 struct uv_scir_s scir
;
149 DECLARE_PER_CPU(struct uv_hub_info_s
, __uv_hub_info
);
150 #define uv_hub_info (&__get_cpu_var(__uv_hub_info))
151 #define uv_cpu_hub_info(cpu) (&per_cpu(__uv_hub_info, cpu))
154 * Local & Global MMR space macros.
155 * Note: macros are intended to be used ONLY by inline functions
156 * in this file - not by other kernel code.
157 * n - NASID (full 15-bit global nasid)
158 * g - GNODE (full 15-bit global nasid, right shifted 1)
159 * p - PNODE (local part of nsids, right shifted 1)
161 #define UV_NASID_TO_PNODE(n) (((n) >> 1) & uv_hub_info->pnode_mask)
162 #define UV_PNODE_TO_NASID(p) (((p) << 1) | uv_hub_info->gnode_upper)
164 #define UV_LOCAL_MMR_BASE 0xf4000000UL
165 #define UV_GLOBAL_MMR32_BASE 0xf8000000UL
166 #define UV_GLOBAL_MMR64_BASE (uv_hub_info->global_mmr_base)
167 #define UV_LOCAL_MMR_SIZE (64UL * 1024 * 1024)
168 #define UV_GLOBAL_MMR32_SIZE (64UL * 1024 * 1024)
170 #define UV_GLOBAL_MMR32_PNODE_SHIFT 15
171 #define UV_GLOBAL_MMR64_PNODE_SHIFT 26
173 #define UV_GLOBAL_MMR32_PNODE_BITS(p) ((p) << (UV_GLOBAL_MMR32_PNODE_SHIFT))
175 #define UV_GLOBAL_MMR64_PNODE_BITS(p) \
176 ((unsigned long)(p) << UV_GLOBAL_MMR64_PNODE_SHIFT)
178 #define UV_APIC_PNODE_SHIFT 6
180 /* Local Bus from cpu's perspective */
181 #define LOCAL_BUS_BASE 0x1c00000
182 #define LOCAL_BUS_SIZE (4 * 1024 * 1024)
185 * System Controller Interface Reg
187 * Note there are NO leds on a UV system. This register is only
188 * used by the system controller to monitor system-wide operation.
189 * There are 64 regs per node. With Nahelem cpus (2 cores per node,
190 * 8 cpus per core, 2 threads per cpu) there are 32 cpu threads on
193 * The window is located at top of ACPI MMR space
195 #define SCIR_WINDOW_COUNT 64
196 #define SCIR_LOCAL_MMR_BASE (LOCAL_BUS_BASE + \
200 #define SCIR_CPU_HEARTBEAT 0x01 /* timer interrupt */
201 #define SCIR_CPU_ACTIVITY 0x02 /* not idle */
202 #define SCIR_CPU_HB_INTERVAL (HZ) /* once per second */
204 /* Loop through all installed blades */
205 #define for_each_possible_blade(bid) \
206 for ((bid) = 0; (bid) < uv_num_possible_blades(); (bid)++)
209 * Macros for converting between kernel virtual addresses, socket local physical
210 * addresses, and UV global physical addresses.
211 * Note: use the standard __pa() & __va() macros for converting
212 * between socket virtual and socket physical addresses.
215 /* socket phys RAM --> UV global physical address */
216 static inline unsigned long uv_soc_phys_ram_to_gpa(unsigned long paddr
)
218 if (paddr
< uv_hub_info
->lowmem_remap_top
)
219 paddr
|= uv_hub_info
->lowmem_remap_base
;
220 return paddr
| uv_hub_info
->gnode_upper
;
224 /* socket virtual --> UV global physical address */
225 static inline unsigned long uv_gpa(void *v
)
227 return uv_soc_phys_ram_to_gpa(__pa(v
));
230 /* pnode, offset --> socket virtual */
231 static inline void *uv_pnode_offset_to_vaddr(int pnode
, unsigned long offset
)
233 return __va(((unsigned long)pnode
<< uv_hub_info
->m_val
) | offset
);
238 * Extract a PNODE from an APICID (full apicid, not processor subset)
240 static inline int uv_apicid_to_pnode(int apicid
)
242 return (apicid
>> UV_APIC_PNODE_SHIFT
);
246 * Access global MMRs using the low memory MMR32 space. This region supports
247 * faster MMR access but not all MMRs are accessible in this space.
249 static inline unsigned long *uv_global_mmr32_address(int pnode
,
250 unsigned long offset
)
252 return __va(UV_GLOBAL_MMR32_BASE
|
253 UV_GLOBAL_MMR32_PNODE_BITS(pnode
) | offset
);
256 static inline void uv_write_global_mmr32(int pnode
, unsigned long offset
,
259 *uv_global_mmr32_address(pnode
, offset
) = val
;
262 static inline unsigned long uv_read_global_mmr32(int pnode
,
263 unsigned long offset
)
265 return *uv_global_mmr32_address(pnode
, offset
);
269 * Access Global MMR space using the MMR space located at the top of physical
272 static inline unsigned long *uv_global_mmr64_address(int pnode
,
273 unsigned long offset
)
275 return __va(UV_GLOBAL_MMR64_BASE
|
276 UV_GLOBAL_MMR64_PNODE_BITS(pnode
) | offset
);
279 static inline void uv_write_global_mmr64(int pnode
, unsigned long offset
,
282 *uv_global_mmr64_address(pnode
, offset
) = val
;
285 static inline unsigned long uv_read_global_mmr64(int pnode
,
286 unsigned long offset
)
288 return *uv_global_mmr64_address(pnode
, offset
);
292 * Access hub local MMRs. Faster than using global space but only local MMRs
295 static inline unsigned long *uv_local_mmr_address(unsigned long offset
)
297 return __va(UV_LOCAL_MMR_BASE
| offset
);
300 static inline unsigned long uv_read_local_mmr(unsigned long offset
)
302 return *uv_local_mmr_address(offset
);
305 static inline void uv_write_local_mmr(unsigned long offset
, unsigned long val
)
307 *uv_local_mmr_address(offset
) = val
;
310 static inline unsigned char uv_read_local_mmr8(unsigned long offset
)
312 return *((unsigned char *)uv_local_mmr_address(offset
));
315 static inline void uv_write_local_mmr8(unsigned long offset
, unsigned char val
)
317 *((unsigned char *)uv_local_mmr_address(offset
)) = val
;
321 * Structures and definitions for converting between cpu, node, pnode, and blade
324 struct uv_blade_info
{
325 unsigned short nr_possible_cpus
;
326 unsigned short nr_online_cpus
;
327 unsigned short pnode
;
329 extern struct uv_blade_info
*uv_blade_info
;
330 extern short *uv_node_to_blade
;
331 extern short *uv_cpu_to_blade
;
332 extern short uv_possible_blades
;
334 /* Blade-local cpu number of current cpu. Numbered 0 .. <# cpus on the blade> */
335 static inline int uv_blade_processor_id(void)
337 return uv_hub_info
->blade_processor_id
;
340 /* Blade number of current cpu. Numnbered 0 .. <#blades -1> */
341 static inline int uv_numa_blade_id(void)
343 return uv_hub_info
->numa_blade_id
;
346 /* Convert a cpu number to the the UV blade number */
347 static inline int uv_cpu_to_blade_id(int cpu
)
349 return uv_cpu_to_blade
[cpu
];
352 /* Convert linux node number to the UV blade number */
353 static inline int uv_node_to_blade_id(int nid
)
355 return uv_node_to_blade
[nid
];
358 /* Convert a blade id to the PNODE of the blade */
359 static inline int uv_blade_to_pnode(int bid
)
361 return uv_blade_info
[bid
].pnode
;
364 /* Determine the number of possible cpus on a blade */
365 static inline int uv_blade_nr_possible_cpus(int bid
)
367 return uv_blade_info
[bid
].nr_possible_cpus
;
370 /* Determine the number of online cpus on a blade */
371 static inline int uv_blade_nr_online_cpus(int bid
)
373 return uv_blade_info
[bid
].nr_online_cpus
;
376 /* Convert a cpu id to the PNODE of the blade containing the cpu */
377 static inline int uv_cpu_to_pnode(int cpu
)
379 return uv_blade_info
[uv_cpu_to_blade_id(cpu
)].pnode
;
382 /* Convert a linux node number to the PNODE of the blade */
383 static inline int uv_node_to_pnode(int nid
)
385 return uv_blade_info
[uv_node_to_blade_id(nid
)].pnode
;
388 /* Maximum possible number of blades */
389 static inline int uv_num_possible_blades(void)
391 return uv_possible_blades
;
394 /* Update SCIR state */
395 static inline void uv_set_scir_bits(unsigned char value
)
397 if (uv_hub_info
->scir
.state
!= value
) {
398 uv_hub_info
->scir
.state
= value
;
399 uv_write_local_mmr8(uv_hub_info
->scir
.offset
, value
);
403 static inline void uv_set_cpu_scir_bits(int cpu
, unsigned char value
)
405 if (uv_cpu_hub_info(cpu
)->scir
.state
!= value
) {
406 uv_cpu_hub_info(cpu
)->scir
.state
= value
;
407 uv_write_local_mmr8(uv_cpu_hub_info(cpu
)->scir
.offset
, value
);
411 static inline void uv_hub_send_ipi(int pnode
, int apicid
, int vector
)
415 val
= (1UL << UVH_IPI_INT_SEND_SHFT
) |
416 ((apicid
& 0x3f) << UVH_IPI_INT_APIC_ID_SHFT
) |
417 (vector
<< UVH_IPI_INT_VECTOR_SHFT
);
418 uv_write_global_mmr64(pnode
, UVH_IPI_INT
, val
);
421 #endif /* CONFIG_X86_64 */
422 #endif /* _ASM_X86_UV_UV_HUB_H */
This page took 0.039539 seconds and 5 git commands to generate.