2 * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
4 * This file contains the lowest level x86-specific interrupt
5 * entry, irq-stacks and irq statistics code. All the remaining
6 * irq logic is done by the generic kernel/irq/ code and
7 * by the x86-specific irq controller code. (e.g. i8259.c and
11 #include <linux/module.h>
12 #include <linux/seq_file.h>
13 #include <linux/interrupt.h>
14 #include <linux/kernel_stat.h>
15 #include <linux/notifier.h>
16 #include <linux/cpu.h>
17 #include <linux/delay.h>
20 #include <asm/uaccess.h>
22 DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t
, irq_stat
);
23 EXPORT_PER_CPU_SYMBOL(irq_stat
);
25 DEFINE_PER_CPU(struct pt_regs
*, irq_regs
);
26 EXPORT_PER_CPU_SYMBOL(irq_regs
);
29 * 'what should we do if we get a hw irq event on an illegal vector'.
30 * each architecture has to answer this themselves.
32 void ack_bad_irq(unsigned int irq
)
34 printk(KERN_ERR
"unexpected IRQ trap at vector %02x\n", irq
);
36 #ifdef CONFIG_X86_LOCAL_APIC
38 * Currently unexpected vectors happen only on SMP and APIC.
39 * We _must_ ack these because every local APIC has only N
40 * irq slots per priority level, and a 'hanging, unacked' IRQ
41 * holds up an irq slot - in excessive cases (when multiple
42 * unexpected vectors occur) that might lock up the APIC
44 * But only ack when the APIC is enabled -AK
51 #ifdef CONFIG_DEBUG_STACKOVERFLOW
52 /* Debugging check for stack overflow: is there less than 1KB free? */
53 static int check_stack_overflow(void)
57 __asm__
__volatile__("andl %%esp,%0" :
58 "=r" (sp
) : "0" (THREAD_SIZE
- 1));
60 return sp
< (sizeof(struct thread_info
) + STACK_WARN
);
63 static void print_stack_overflow(void)
65 printk(KERN_WARNING
"low stack detected by irq handler\n");
70 static inline int check_stack_overflow(void) { return 0; }
71 static inline void print_stack_overflow(void) { }
74 #ifdef CONFIG_4KSTACKS
76 * per-CPU IRQ handling contexts (thread information and stack)
79 struct thread_info tinfo
;
80 u32 stack
[THREAD_SIZE
/sizeof(u32
)];
83 static union irq_ctx
*hardirq_ctx
[NR_CPUS
] __read_mostly
;
84 static union irq_ctx
*softirq_ctx
[NR_CPUS
] __read_mostly
;
86 static char softirq_stack
[NR_CPUS
* THREAD_SIZE
] __page_aligned_bss
;
87 static char hardirq_stack
[NR_CPUS
* THREAD_SIZE
] __page_aligned_bss
;
89 static void call_on_stack(void *func
, void *stack
)
91 asm volatile("xchgl %%ebx,%%esp \n"
97 : "memory", "cc", "edx", "ecx", "eax");
101 execute_on_irq_stack(int overflow
, struct irq_desc
*desc
, int irq
)
103 union irq_ctx
*curctx
, *irqctx
;
104 u32
*isp
, arg1
, arg2
;
106 curctx
= (union irq_ctx
*) current_thread_info();
107 irqctx
= hardirq_ctx
[smp_processor_id()];
110 * this is where we switch to the IRQ stack. However, if we are
111 * already using the IRQ stack (because we interrupted a hardirq
112 * handler) we can't do that and just have to keep using the
113 * current stack (which is the irq stack already after all)
115 if (unlikely(curctx
== irqctx
))
118 /* build the stack frame on the IRQ stack */
119 isp
= (u32
*) ((char*)irqctx
+ sizeof(*irqctx
));
120 irqctx
->tinfo
.task
= curctx
->tinfo
.task
;
121 irqctx
->tinfo
.previous_esp
= current_stack_pointer
;
124 * Copy the softirq bits in preempt_count so that the
125 * softirq checks work in the hardirq context.
127 irqctx
->tinfo
.preempt_count
=
128 (irqctx
->tinfo
.preempt_count
& ~SOFTIRQ_MASK
) |
129 (curctx
->tinfo
.preempt_count
& SOFTIRQ_MASK
);
131 if (unlikely(overflow
))
132 call_on_stack(print_stack_overflow
, isp
);
134 asm volatile("xchgl %%ebx,%%esp \n"
136 "movl %%ebx,%%esp \n"
137 : "=a" (arg1
), "=d" (arg2
), "=b" (isp
)
138 : "0" (irq
), "1" (desc
), "2" (isp
),
139 "D" (desc
->handle_irq
)
140 : "memory", "cc", "ecx");
145 * allocate per-cpu stacks for hardirq and for softirq processing
147 void __cpuinit
irq_ctx_init(int cpu
)
149 union irq_ctx
*irqctx
;
151 if (hardirq_ctx
[cpu
])
154 irqctx
= (union irq_ctx
*) &hardirq_stack
[cpu
*THREAD_SIZE
];
155 irqctx
->tinfo
.task
= NULL
;
156 irqctx
->tinfo
.exec_domain
= NULL
;
157 irqctx
->tinfo
.cpu
= cpu
;
158 irqctx
->tinfo
.preempt_count
= HARDIRQ_OFFSET
;
159 irqctx
->tinfo
.addr_limit
= MAKE_MM_SEG(0);
161 hardirq_ctx
[cpu
] = irqctx
;
163 irqctx
= (union irq_ctx
*) &softirq_stack
[cpu
*THREAD_SIZE
];
164 irqctx
->tinfo
.task
= NULL
;
165 irqctx
->tinfo
.exec_domain
= NULL
;
166 irqctx
->tinfo
.cpu
= cpu
;
167 irqctx
->tinfo
.preempt_count
= 0;
168 irqctx
->tinfo
.addr_limit
= MAKE_MM_SEG(0);
170 softirq_ctx
[cpu
] = irqctx
;
172 printk(KERN_DEBUG
"CPU %u irqstacks, hard=%p soft=%p\n",
173 cpu
,hardirq_ctx
[cpu
],softirq_ctx
[cpu
]);
176 void irq_ctx_exit(int cpu
)
178 hardirq_ctx
[cpu
] = NULL
;
181 asmlinkage
void do_softirq(void)
184 struct thread_info
*curctx
;
185 union irq_ctx
*irqctx
;
191 local_irq_save(flags
);
193 if (local_softirq_pending()) {
194 curctx
= current_thread_info();
195 irqctx
= softirq_ctx
[smp_processor_id()];
196 irqctx
->tinfo
.task
= curctx
->task
;
197 irqctx
->tinfo
.previous_esp
= current_stack_pointer
;
199 /* build the stack frame on the softirq stack */
200 isp
= (u32
*) ((char*)irqctx
+ sizeof(*irqctx
));
202 call_on_stack(__do_softirq
, isp
);
204 * Shouldnt happen, we returned above if in_interrupt():
206 WARN_ON_ONCE(softirq_count());
209 local_irq_restore(flags
);
214 execute_on_irq_stack(int overflow
, struct irq_desc
*desc
, int irq
) { return 0; }
218 * do_IRQ handles all normal device IRQ's (the special
219 * SMP cross-CPU interrupts have their own specific
222 unsigned int do_IRQ(struct pt_regs
*regs
)
224 struct pt_regs
*old_regs
;
225 /* high bit used in ret_from_ code */
227 unsigned vector
= ~regs
->orig_ax
;
228 struct irq_desc
*desc
;
232 old_regs
= set_irq_regs(regs
);
234 irq
= __get_cpu_var(vector_irq
)[vector
];
236 overflow
= check_stack_overflow();
238 desc
= irq_to_desc(irq
);
239 if (unlikely(!desc
)) {
240 printk(KERN_EMERG
"%s: cannot handle IRQ %d vector %#x\n",
241 __func__
, irq
, vector
);
245 if (!execute_on_irq_stack(overflow
, desc
, irq
)) {
246 if (unlikely(overflow
))
247 print_stack_overflow();
248 desc
->handle_irq(irq
, desc
);
252 set_irq_regs(old_regs
);
257 * Interrupt statistics:
260 atomic_t irq_err_count
;
263 * /proc/interrupts printing:
266 int show_interrupts(struct seq_file
*p
, void *v
)
268 int i
= *(loff_t
*) v
, j
;
269 struct irqaction
* action
;
271 unsigned int entries
;
272 struct irq_desc
*desc
;
275 #ifdef CONFIG_HAVE_SPARSE_IRQ
276 desc
= (struct irq_desc
*)v
;
282 entries
= nr_irqs
- 1;
287 desc
= irq_to_desc(i
);
292 for_each_online_cpu(j
)
293 seq_printf(p
, "CPU%-8d",j
);
298 unsigned any_count
= 0;
300 spin_lock_irqsave(&desc
->lock
, flags
);
302 any_count
= kstat_irqs(i
);
304 for_each_online_cpu(j
)
305 any_count
|= kstat_irqs_cpu(i
, j
);
307 action
= desc
->action
;
308 if (!action
&& !any_count
)
310 seq_printf(p
, "%#x: ",i
);
312 seq_printf(p
, "%10u ", kstat_irqs(i
));
314 for_each_online_cpu(j
)
315 seq_printf(p
, "%10u ", kstat_irqs_cpu(i
, j
));
317 seq_printf(p
, " %8s", desc
->chip
->name
);
318 seq_printf(p
, "-%-8s", desc
->name
);
321 seq_printf(p
, " %s", action
->name
);
322 while ((action
= action
->next
) != NULL
)
323 seq_printf(p
, ", %s", action
->name
);
328 spin_unlock_irqrestore(&desc
->lock
, flags
);
332 seq_printf(p
, "NMI: ");
333 for_each_online_cpu(j
)
334 seq_printf(p
, "%10u ", nmi_count(j
));
335 seq_printf(p
, " Non-maskable interrupts\n");
336 #ifdef CONFIG_X86_LOCAL_APIC
337 seq_printf(p
, "LOC: ");
338 for_each_online_cpu(j
)
339 seq_printf(p
, "%10u ",
340 per_cpu(irq_stat
,j
).apic_timer_irqs
);
341 seq_printf(p
, " Local timer interrupts\n");
344 seq_printf(p
, "RES: ");
345 for_each_online_cpu(j
)
346 seq_printf(p
, "%10u ",
347 per_cpu(irq_stat
,j
).irq_resched_count
);
348 seq_printf(p
, " Rescheduling interrupts\n");
349 seq_printf(p
, "CAL: ");
350 for_each_online_cpu(j
)
351 seq_printf(p
, "%10u ",
352 per_cpu(irq_stat
,j
).irq_call_count
);
353 seq_printf(p
, " Function call interrupts\n");
354 seq_printf(p
, "TLB: ");
355 for_each_online_cpu(j
)
356 seq_printf(p
, "%10u ",
357 per_cpu(irq_stat
,j
).irq_tlb_count
);
358 seq_printf(p
, " TLB shootdowns\n");
360 #ifdef CONFIG_X86_MCE
361 seq_printf(p
, "TRM: ");
362 for_each_online_cpu(j
)
363 seq_printf(p
, "%10u ",
364 per_cpu(irq_stat
,j
).irq_thermal_count
);
365 seq_printf(p
, " Thermal event interrupts\n");
367 #ifdef CONFIG_X86_LOCAL_APIC
368 seq_printf(p
, "SPU: ");
369 for_each_online_cpu(j
)
370 seq_printf(p
, "%10u ",
371 per_cpu(irq_stat
,j
).irq_spurious_count
);
372 seq_printf(p
, " Spurious interrupts\n");
374 seq_printf(p
, "ERR: %10u\n", atomic_read(&irq_err_count
));
375 #if defined(CONFIG_X86_IO_APIC)
376 seq_printf(p
, "MIS: %10u\n", atomic_read(&irq_mis_count
));
385 u64
arch_irq_stat_cpu(unsigned int cpu
)
387 u64 sum
= nmi_count(cpu
);
389 #ifdef CONFIG_X86_LOCAL_APIC
390 sum
+= per_cpu(irq_stat
, cpu
).apic_timer_irqs
;
393 sum
+= per_cpu(irq_stat
, cpu
).irq_resched_count
;
394 sum
+= per_cpu(irq_stat
, cpu
).irq_call_count
;
395 sum
+= per_cpu(irq_stat
, cpu
).irq_tlb_count
;
397 #ifdef CONFIG_X86_MCE
398 sum
+= per_cpu(irq_stat
, cpu
).irq_thermal_count
;
400 #ifdef CONFIG_X86_LOCAL_APIC
401 sum
+= per_cpu(irq_stat
, cpu
).irq_spurious_count
;
406 u64
arch_irq_stat(void)
408 u64 sum
= atomic_read(&irq_err_count
);
410 #ifdef CONFIG_X86_IO_APIC
411 sum
+= atomic_read(&irq_mis_count
);
416 #ifdef CONFIG_HOTPLUG_CPU
417 #include <mach_apic.h>
419 void fixup_irqs(cpumask_t map
)
423 struct irq_desc
*desc
;
425 for_each_irq_desc(irq
, desc
) {
431 cpus_and(mask
, desc
->affinity
, map
);
432 if (any_online_cpu(mask
) == NR_CPUS
) {
433 printk("Breaking affinity for irq %i\n", irq
);
436 if (desc
->chip
->set_affinity
)
437 desc
->chip
->set_affinity(irq
, mask
);
438 else if (desc
->action
&& !(warned
++))
439 printk("Cannot set affinity for irq %i\n", irq
);
444 /* Ingo Molnar says: "after the IO-APIC masks have been redirected
445 [note the nop - the interrupt-enable boundary on x86 is two
446 instructions from sti] - to flush out pending hardirqs and
447 IPIs. After this point nothing is supposed to reach this CPU." */
448 __asm__
__volatile__("sti; nop; cli");
451 /* That doesn't seem sufficient. Give it 1ms. */
This page took 0.068774 seconds and 6 git commands to generate.