1 #include <linux/errno.h>
2 #include <linux/signal.h>
3 #include <linux/sched.h>
4 #include <linux/ioport.h>
5 #include <linux/interrupt.h>
6 #include <linux/slab.h>
7 #include <linux/random.h>
8 #include <linux/init.h>
9 #include <linux/kernel_stat.h>
10 #include <linux/sysdev.h>
11 #include <linux/bitops.h>
13 #include <asm/atomic.h>
14 #include <asm/system.h>
16 #include <asm/timer.h>
17 #include <asm/pgtable.h>
18 #include <asm/delay.h>
21 #include <asm/arch_hooks.h>
22 #include <asm/i8259.h>
27 * Note that on a 486, we don't want to do a SIGFPE on an irq13
28 * as the irq is unreliable, and exception 16 works correctly
29 * (ie as explained in the intel literature). On a 386, you
30 * can't use exception 16 due to bad IBM design, so we have to
31 * rely on the less exact irq13.
33 * Careful.. Not only is IRQ13 unreliable, but it is also
34 * leads to races. IBM designers who came up with it should
39 static irqreturn_t
math_error_irq(int cpl
, void *dev_id
)
41 extern void math_error(void __user
*);
43 if (ignore_fpu_irq
|| !boot_cpu_data
.hard_math
)
45 math_error((void __user
*)get_irq_regs()->ip
);
50 * New motherboards sometimes make IRQ 13 be a PCI interrupt,
51 * so allow interrupt sharing.
53 static struct irqaction fpu_irq
= {
54 .handler
= math_error_irq
,
55 .mask
= CPU_MASK_NONE
,
59 void __init
init_ISA_irqs (void)
63 #ifdef CONFIG_X86_LOCAL_APIC
69 * 16 old-style INTA-cycle interrupts:
71 for (i
= 0; i
< 16; i
++) {
72 set_irq_chip_and_handler_name(i
, &i8259A_chip
,
73 handle_level_irq
, "XT");
78 * IRQ2 is cascade interrupt to second interrupt controller
80 static struct irqaction irq2
= {
82 .mask
= CPU_MASK_NONE
,
86 /* Overridden in paravirt.c */
87 void init_IRQ(void) __attribute__((weak
, alias("native_init_IRQ")));
89 void __init
native_init_IRQ(void)
93 /* all the set up before the call gates are initialised */
97 * Cover the whole vector space, no vector can escape
98 * us. (some of these will be overridden and become
99 * 'special' SMP interrupts)
101 for (i
= 0; i
< (NR_VECTORS
- FIRST_EXTERNAL_VECTOR
); i
++) {
102 int vector
= FIRST_EXTERNAL_VECTOR
+ i
;
105 /* SYSCALL_VECTOR was reserved in trap_init. */
106 if (!test_bit(vector
, used_vectors
))
107 set_intr_gate(vector
, interrupt
[i
]);
110 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_SMP)
112 * IRQ0 must be given a fixed assignment and initialized,
113 * because it's used before the IO-APIC is set up.
115 set_intr_gate(FIRST_DEVICE_VECTOR
, interrupt
[0]);
118 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
119 * IPI, driven by wakeup.
121 alloc_intr_gate(RESCHEDULE_VECTOR
, reschedule_interrupt
);
123 /* IPI for invalidation */
124 alloc_intr_gate(INVALIDATE_TLB_VECTOR
, invalidate_interrupt
);
126 /* IPI for generic function call */
127 alloc_intr_gate(CALL_FUNCTION_VECTOR
, call_function_interrupt
);
129 /* IPI for single call function */
130 set_intr_gate(CALL_FUNCTION_SINGLE_VECTOR
, call_function_single_interrupt
);
133 #ifdef CONFIG_X86_LOCAL_APIC
134 /* self generated IPI for local APIC timer */
135 alloc_intr_gate(LOCAL_TIMER_VECTOR
, apic_timer_interrupt
);
137 /* IPI vectors for APIC spurious and error interrupts */
138 alloc_intr_gate(SPURIOUS_APIC_VECTOR
, spurious_interrupt
);
139 alloc_intr_gate(ERROR_APIC_VECTOR
, error_interrupt
);
142 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL)
143 /* thermal monitor LVT interrupt */
144 alloc_intr_gate(THERMAL_APIC_VECTOR
, thermal_interrupt
);
150 /* setup after call gates are initialised (usually add in
151 * the architecture specific gates)
156 * External FPU? Set up irq13 if so, for
157 * original braindamaged IBM FERR coupling.
159 if (boot_cpu_data
.hard_math
&& !cpu_has_fpu
)
160 setup_irq(FPU_IRQ
, &fpu_irq
);
162 irq_ctx_init(smp_processor_id());