Merge branch 'ieee1394-removal' of git://git.kernel.org/pub/scm/linux/kernel/git...
[deliverable/linux.git] / arch / x86 / kernel / olpc-xo1.c
1 /*
2 * Support for features of the OLPC XO-1 laptop
3 *
4 * Copyright (C) 2010 One Laptop per Child
5 * Copyright (C) 2006 Red Hat, Inc.
6 * Copyright (C) 2006 Advanced Micro Devices, Inc.
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 */
13
14 #include <linux/module.h>
15 #include <linux/pci.h>
16 #include <linux/pci_ids.h>
17 #include <linux/platform_device.h>
18 #include <linux/pm.h>
19
20 #include <asm/io.h>
21 #include <asm/olpc.h>
22
23 #define DRV_NAME "olpc-xo1"
24
25 #define PMS_BAR 4
26 #define ACPI_BAR 5
27
28 /* PMC registers (PMS block) */
29 #define PM_SCLK 0x10
30 #define PM_IN_SLPCTL 0x20
31 #define PM_WKXD 0x34
32 #define PM_WKD 0x30
33 #define PM_SSC 0x54
34
35 /* PM registers (ACPI block) */
36 #define PM1_CNT 0x08
37 #define PM_GPE0_STS 0x18
38
39 static unsigned long acpi_base;
40 static unsigned long pms_base;
41
42 static void xo1_power_off(void)
43 {
44 printk(KERN_INFO "OLPC XO-1 power off sequence...\n");
45
46 /* Enable all of these controls with 0 delay */
47 outl(0x40000000, pms_base + PM_SCLK);
48 outl(0x40000000, pms_base + PM_IN_SLPCTL);
49 outl(0x40000000, pms_base + PM_WKXD);
50 outl(0x40000000, pms_base + PM_WKD);
51
52 /* Clear status bits (possibly unnecessary) */
53 outl(0x0002ffff, pms_base + PM_SSC);
54 outl(0xffffffff, acpi_base + PM_GPE0_STS);
55
56 /* Write SLP_EN bit to start the machinery */
57 outl(0x00002000, acpi_base + PM1_CNT);
58 }
59
60 /* Read the base addresses from the PCI BAR info */
61 static int __devinit setup_bases(struct pci_dev *pdev)
62 {
63 int r;
64
65 r = pci_enable_device_io(pdev);
66 if (r) {
67 dev_err(&pdev->dev, "can't enable device IO\n");
68 return r;
69 }
70
71 r = pci_request_region(pdev, ACPI_BAR, DRV_NAME);
72 if (r) {
73 dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", ACPI_BAR);
74 return r;
75 }
76
77 r = pci_request_region(pdev, PMS_BAR, DRV_NAME);
78 if (r) {
79 dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", PMS_BAR);
80 pci_release_region(pdev, ACPI_BAR);
81 return r;
82 }
83
84 acpi_base = pci_resource_start(pdev, ACPI_BAR);
85 pms_base = pci_resource_start(pdev, PMS_BAR);
86
87 return 0;
88 }
89
90 static int __devinit olpc_xo1_probe(struct platform_device *pdev)
91 {
92 struct pci_dev *pcidev;
93 int r;
94
95 pcidev = pci_get_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA,
96 NULL);
97 if (!pdev)
98 return -ENODEV;
99
100 r = setup_bases(pcidev);
101 if (r)
102 return r;
103
104 pm_power_off = xo1_power_off;
105
106 printk(KERN_INFO "OLPC XO-1 support registered\n");
107 return 0;
108 }
109
110 static int __devexit olpc_xo1_remove(struct platform_device *pdev)
111 {
112 pm_power_off = NULL;
113 return 0;
114 }
115
116 static struct platform_driver olpc_xo1_driver = {
117 .driver = {
118 .name = DRV_NAME,
119 .owner = THIS_MODULE,
120 },
121 .probe = olpc_xo1_probe,
122 .remove = __devexit_p(olpc_xo1_remove),
123 };
124
125 static int __init olpc_xo1_init(void)
126 {
127 return platform_driver_register(&olpc_xo1_driver);
128 }
129
130 static void __exit olpc_xo1_exit(void)
131 {
132 platform_driver_unregister(&olpc_xo1_driver);
133 }
134
135 MODULE_AUTHOR("Daniel Drake <dsd@laptop.org>");
136 MODULE_LICENSE("GPL");
137 MODULE_ALIAS("platform:olpc-xo1");
138
139 module_init(olpc_xo1_init);
140 module_exit(olpc_xo1_exit);
This page took 0.09218 seconds and 5 git commands to generate.