x86_64: make /proc/interrupts work with dyn irq_desc
[deliverable/linux.git] / arch / x86 / kernel / pci-dma.c
1 #include <linux/dma-mapping.h>
2 #include <linux/dmar.h>
3 #include <linux/bootmem.h>
4 #include <linux/pci.h>
5
6 #include <asm/proto.h>
7 #include <asm/dma.h>
8 #include <asm/iommu.h>
9 #include <asm/calgary.h>
10 #include <asm/amd_iommu.h>
11
12 static int forbid_dac __read_mostly;
13
14 struct dma_mapping_ops *dma_ops;
15 EXPORT_SYMBOL(dma_ops);
16
17 static int iommu_sac_force __read_mostly;
18
19 #ifdef CONFIG_IOMMU_DEBUG
20 int panic_on_overflow __read_mostly = 1;
21 int force_iommu __read_mostly = 1;
22 #else
23 int panic_on_overflow __read_mostly = 0;
24 int force_iommu __read_mostly = 0;
25 #endif
26
27 int iommu_merge __read_mostly = 0;
28
29 int no_iommu __read_mostly;
30 /* Set this to 1 if there is a HW IOMMU in the system */
31 int iommu_detected __read_mostly = 0;
32
33 /* This tells the BIO block layer to assume merging. Default to off
34 because we cannot guarantee merging later. */
35 int iommu_bio_merge __read_mostly = 0;
36 EXPORT_SYMBOL(iommu_bio_merge);
37
38 dma_addr_t bad_dma_address __read_mostly = 0;
39 EXPORT_SYMBOL(bad_dma_address);
40
41 /* Dummy device used for NULL arguments (normally ISA). Better would
42 be probably a smaller DMA mask, but this is bug-to-bug compatible
43 to older i386. */
44 struct device x86_dma_fallback_dev = {
45 .bus_id = "fallback device",
46 .coherent_dma_mask = DMA_32BIT_MASK,
47 .dma_mask = &x86_dma_fallback_dev.coherent_dma_mask,
48 };
49 EXPORT_SYMBOL(x86_dma_fallback_dev);
50
51 int dma_set_mask(struct device *dev, u64 mask)
52 {
53 if (!dev->dma_mask || !dma_supported(dev, mask))
54 return -EIO;
55
56 *dev->dma_mask = mask;
57
58 return 0;
59 }
60 EXPORT_SYMBOL(dma_set_mask);
61
62 #ifdef CONFIG_X86_64
63 static __initdata void *dma32_bootmem_ptr;
64 static unsigned long dma32_bootmem_size __initdata = (128ULL<<20);
65
66 static int __init parse_dma32_size_opt(char *p)
67 {
68 if (!p)
69 return -EINVAL;
70 dma32_bootmem_size = memparse(p, &p);
71 return 0;
72 }
73 early_param("dma32_size", parse_dma32_size_opt);
74
75 void __init dma32_reserve_bootmem(void)
76 {
77 unsigned long size, align;
78 if (max_pfn <= MAX_DMA32_PFN)
79 return;
80
81 /*
82 * check aperture_64.c allocate_aperture() for reason about
83 * using 512M as goal
84 */
85 align = 64ULL<<20;
86 size = roundup(dma32_bootmem_size, align);
87 dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align,
88 512ULL<<20);
89 if (dma32_bootmem_ptr)
90 dma32_bootmem_size = size;
91 else
92 dma32_bootmem_size = 0;
93 }
94 static void __init dma32_free_bootmem(void)
95 {
96
97 if (max_pfn <= MAX_DMA32_PFN)
98 return;
99
100 if (!dma32_bootmem_ptr)
101 return;
102
103 free_bootmem(__pa(dma32_bootmem_ptr), dma32_bootmem_size);
104
105 dma32_bootmem_ptr = NULL;
106 dma32_bootmem_size = 0;
107 }
108
109 void __init pci_iommu_alloc(void)
110 {
111 /* free the range so iommu could get some range less than 4G */
112 dma32_free_bootmem();
113 /*
114 * The order of these functions is important for
115 * fall-back/fail-over reasons
116 */
117 gart_iommu_hole_init();
118
119 detect_calgary();
120
121 detect_intel_iommu();
122
123 amd_iommu_detect();
124
125 pci_swiotlb_init();
126 }
127
128 unsigned long iommu_num_pages(unsigned long addr, unsigned long len)
129 {
130 unsigned long size = roundup((addr & ~PAGE_MASK) + len, PAGE_SIZE);
131
132 return size >> PAGE_SHIFT;
133 }
134 EXPORT_SYMBOL(iommu_num_pages);
135 #endif
136
137 void *dma_generic_alloc_coherent(struct device *dev, size_t size,
138 dma_addr_t *dma_addr, gfp_t flag)
139 {
140 unsigned long dma_mask;
141 struct page *page;
142 dma_addr_t addr;
143
144 dma_mask = dma_alloc_coherent_mask(dev, flag);
145
146 flag |= __GFP_ZERO;
147 again:
148 page = alloc_pages_node(dev_to_node(dev), flag, get_order(size));
149 if (!page)
150 return NULL;
151
152 addr = page_to_phys(page);
153 if (!is_buffer_dma_capable(dma_mask, addr, size)) {
154 __free_pages(page, get_order(size));
155
156 if (dma_mask < DMA_32BIT_MASK && !(flag & GFP_DMA)) {
157 flag = (flag & ~GFP_DMA32) | GFP_DMA;
158 goto again;
159 }
160
161 return NULL;
162 }
163
164 *dma_addr = addr;
165 return page_address(page);
166 }
167
168 /*
169 * See <Documentation/x86_64/boot-options.txt> for the iommu kernel parameter
170 * documentation.
171 */
172 static __init int iommu_setup(char *p)
173 {
174 iommu_merge = 1;
175
176 if (!p)
177 return -EINVAL;
178
179 while (*p) {
180 if (!strncmp(p, "off", 3))
181 no_iommu = 1;
182 /* gart_parse_options has more force support */
183 if (!strncmp(p, "force", 5))
184 force_iommu = 1;
185 if (!strncmp(p, "noforce", 7)) {
186 iommu_merge = 0;
187 force_iommu = 0;
188 }
189
190 if (!strncmp(p, "biomerge", 8)) {
191 iommu_bio_merge = 4096;
192 iommu_merge = 1;
193 force_iommu = 1;
194 }
195 if (!strncmp(p, "panic", 5))
196 panic_on_overflow = 1;
197 if (!strncmp(p, "nopanic", 7))
198 panic_on_overflow = 0;
199 if (!strncmp(p, "merge", 5)) {
200 iommu_merge = 1;
201 force_iommu = 1;
202 }
203 if (!strncmp(p, "nomerge", 7))
204 iommu_merge = 0;
205 if (!strncmp(p, "forcesac", 8))
206 iommu_sac_force = 1;
207 if (!strncmp(p, "allowdac", 8))
208 forbid_dac = 0;
209 if (!strncmp(p, "nodac", 5))
210 forbid_dac = -1;
211 if (!strncmp(p, "usedac", 6)) {
212 forbid_dac = -1;
213 return 1;
214 }
215 #ifdef CONFIG_SWIOTLB
216 if (!strncmp(p, "soft", 4))
217 swiotlb = 1;
218 #endif
219
220 gart_parse_options(p);
221
222 #ifdef CONFIG_CALGARY_IOMMU
223 if (!strncmp(p, "calgary", 7))
224 use_calgary = 1;
225 #endif /* CONFIG_CALGARY_IOMMU */
226
227 p += strcspn(p, ",");
228 if (*p == ',')
229 ++p;
230 }
231 return 0;
232 }
233 early_param("iommu", iommu_setup);
234
235 int dma_supported(struct device *dev, u64 mask)
236 {
237 struct dma_mapping_ops *ops = get_dma_ops(dev);
238
239 #ifdef CONFIG_PCI
240 if (mask > 0xffffffff && forbid_dac > 0) {
241 dev_info(dev, "PCI: Disallowing DAC for device\n");
242 return 0;
243 }
244 #endif
245
246 if (ops->dma_supported)
247 return ops->dma_supported(dev, mask);
248
249 /* Copied from i386. Doesn't make much sense, because it will
250 only work for pci_alloc_coherent.
251 The caller just has to use GFP_DMA in this case. */
252 if (mask < DMA_24BIT_MASK)
253 return 0;
254
255 /* Tell the device to use SAC when IOMMU force is on. This
256 allows the driver to use cheaper accesses in some cases.
257
258 Problem with this is that if we overflow the IOMMU area and
259 return DAC as fallback address the device may not handle it
260 correctly.
261
262 As a special case some controllers have a 39bit address
263 mode that is as efficient as 32bit (aic79xx). Don't force
264 SAC for these. Assume all masks <= 40 bits are of this
265 type. Normally this doesn't make any difference, but gives
266 more gentle handling of IOMMU overflow. */
267 if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) {
268 dev_info(dev, "Force SAC with mask %Lx\n", mask);
269 return 0;
270 }
271
272 return 1;
273 }
274 EXPORT_SYMBOL(dma_supported);
275
276 static int __init pci_iommu_init(void)
277 {
278 calgary_iommu_init();
279
280 intel_iommu_init();
281
282 amd_iommu_init();
283
284 gart_iommu_init();
285
286 no_iommu_init();
287 return 0;
288 }
289
290 void pci_iommu_shutdown(void)
291 {
292 gart_iommu_shutdown();
293 }
294 /* Must execute after PCI subsystem */
295 fs_initcall(pci_iommu_init);
296
297 #ifdef CONFIG_PCI
298 /* Many VIA bridges seem to corrupt data for DAC. Disable it here */
299
300 static __devinit void via_no_dac(struct pci_dev *dev)
301 {
302 if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) {
303 printk(KERN_INFO "PCI: VIA PCI bridge detected."
304 "Disabling DAC.\n");
305 forbid_dac = 1;
306 }
307 }
308 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac);
309 #endif
This page took 0.037033 seconds and 5 git commands to generate.