1 /* -*- mode: c; c-basic-offset: 8 -*- */
3 /* Copyright (C) 1999,2001
5 * Author: J.E.J.Bottomley@HansenPartnership.com
7 * This file provides all the same external entries as smp.c but uses
8 * the voyager hal to provide the functionality
10 #include <linux/module.h>
12 #include <linux/kernel_stat.h>
13 #include <linux/delay.h>
14 #include <linux/mc146818rtc.h>
15 #include <linux/cache.h>
16 #include <linux/interrupt.h>
17 #include <linux/init.h>
18 #include <linux/kernel.h>
19 #include <linux/bootmem.h>
20 #include <linux/completion.h>
22 #include <asm/voyager.h>
25 #include <asm/pgalloc.h>
26 #include <asm/tlbflush.h>
27 #include <asm/arch_hooks.h>
28 #include <asm/trampoline.h>
30 /* TLB state -- visible externally, indexed physically */
31 DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state
, cpu_tlbstate
) = { &init_mm
, 0 };
33 /* CPU IRQ affinity -- set to all ones initially */
34 static unsigned long cpu_irq_affinity
[NR_CPUS
] __cacheline_aligned
=
35 {[0 ... NR_CPUS
-1] = ~0UL };
37 /* per CPU data structure (for /proc/cpuinfo et al), visible externally
38 * indexed physically */
39 DEFINE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86
, cpu_info
);
40 EXPORT_PER_CPU_SYMBOL(cpu_info
);
42 /* physical ID of the CPU used to boot the system */
43 unsigned char boot_cpu_id
;
45 /* The memory line addresses for the Quad CPIs */
46 struct voyager_qic_cpi
*voyager_quad_cpi_addr
[NR_CPUS
] __cacheline_aligned
;
48 /* The masks for the Extended VIC processors, filled in by cat_init */
49 __u32 voyager_extended_vic_processors
= 0;
51 /* Masks for the extended Quad processors which cannot be VIC booted */
52 __u32 voyager_allowed_boot_processors
= 0;
54 /* The mask for the Quad Processors (both extended and non-extended) */
55 __u32 voyager_quad_processors
= 0;
57 /* Total count of live CPUs, used in process.c to display
58 * the CPU information and in irq.c for the per CPU irq
59 * activity count. Finally exported by i386_ksyms.c */
60 static int voyager_extended_cpus
= 1;
62 /* Used for the invalidate map that's also checked in the spinlock */
63 static volatile unsigned long smp_invalidate_needed
;
65 /* Bitmask of currently online CPUs - used by setup.c for
66 /proc/cpuinfo, visible externally but still physical */
67 cpumask_t cpu_online_map
= CPU_MASK_NONE
;
68 EXPORT_SYMBOL(cpu_online_map
);
70 /* Bitmask of CPUs present in the system - exported by i386_syms.c, used
71 * by scheduler but indexed physically */
72 cpumask_t phys_cpu_present_map
= CPU_MASK_NONE
;
74 /* The internal functions */
75 static void send_CPI(__u32 cpuset
, __u8 cpi
);
76 static void ack_CPI(__u8 cpi
);
77 static int ack_QIC_CPI(__u8 cpi
);
78 static void ack_special_QIC_CPI(__u8 cpi
);
79 static void ack_VIC_CPI(__u8 cpi
);
80 static void send_CPI_allbutself(__u8 cpi
);
81 static void mask_vic_irq(unsigned int irq
);
82 static void unmask_vic_irq(unsigned int irq
);
83 static unsigned int startup_vic_irq(unsigned int irq
);
84 static void enable_local_vic_irq(unsigned int irq
);
85 static void disable_local_vic_irq(unsigned int irq
);
86 static void before_handle_vic_irq(unsigned int irq
);
87 static void after_handle_vic_irq(unsigned int irq
);
88 static void set_vic_irq_affinity(unsigned int irq
, cpumask_t mask
);
89 static void ack_vic_irq(unsigned int irq
);
90 static void vic_enable_cpi(void);
91 static void do_boot_cpu(__u8 cpuid
);
92 static void do_quad_bootstrap(void);
94 int hard_smp_processor_id(void);
95 int safe_smp_processor_id(void);
97 /* Inline functions */
98 static inline void send_one_QIC_CPI(__u8 cpu
, __u8 cpi
)
100 voyager_quad_cpi_addr
[cpu
]->qic_cpi
[cpi
].cpi
=
101 (smp_processor_id() << 16) + cpi
;
104 static inline void send_QIC_CPI(__u32 cpuset
, __u8 cpi
)
108 for_each_online_cpu(cpu
) {
109 if (cpuset
& (1 << cpu
)) {
111 if (!cpu_online(cpu
))
112 VDEBUG(("CPU%d sending cpi %d to CPU%d not in "
114 hard_smp_processor_id(), cpi
, cpu
));
116 send_one_QIC_CPI(cpu
, cpi
- QIC_CPI_OFFSET
);
121 static inline void wrapper_smp_local_timer_interrupt(void)
124 smp_local_timer_interrupt();
128 static inline void send_one_CPI(__u8 cpu
, __u8 cpi
)
130 if (voyager_quad_processors
& (1 << cpu
))
131 send_one_QIC_CPI(cpu
, cpi
- QIC_CPI_OFFSET
);
133 send_CPI(1 << cpu
, cpi
);
136 static inline void send_CPI_allbutself(__u8 cpi
)
138 __u8 cpu
= smp_processor_id();
139 __u32 mask
= cpus_addr(cpu_online_map
)[0] & ~(1 << cpu
);
143 static inline int is_cpu_quad(void)
145 __u8 cpumask
= inb(VIC_PROC_WHO_AM_I
);
146 return ((cpumask
& QUAD_IDENTIFIER
) == QUAD_IDENTIFIER
);
149 static inline int is_cpu_extended(void)
151 __u8 cpu
= hard_smp_processor_id();
153 return (voyager_extended_vic_processors
& (1 << cpu
));
156 static inline int is_cpu_vic_boot(void)
158 __u8 cpu
= hard_smp_processor_id();
160 return (voyager_extended_vic_processors
161 & voyager_allowed_boot_processors
& (1 << cpu
));
164 static inline void ack_CPI(__u8 cpi
)
167 case VIC_CPU_BOOT_CPI
:
168 if (is_cpu_quad() && !is_cpu_vic_boot())
175 /* These are slightly strange. Even on the Quad card,
176 * They are vectored as VIC CPIs */
178 ack_special_QIC_CPI(cpi
);
183 printk("VOYAGER ERROR: CPI%d is in common CPI code\n", cpi
);
188 /* local variables */
190 /* The VIC IRQ descriptors -- these look almost identical to the
191 * 8259 IRQs except that masks and things must be kept per processor
193 static struct irq_chip vic_chip
= {
195 .startup
= startup_vic_irq
,
196 .mask
= mask_vic_irq
,
197 .unmask
= unmask_vic_irq
,
198 .set_affinity
= set_vic_irq_affinity
,
201 /* used to count up as CPUs are brought on line (starts at 0) */
202 static int cpucount
= 0;
204 /* The per cpu profile stuff - used in smp_local_timer_interrupt */
205 static DEFINE_PER_CPU(int, prof_multiplier
) = 1;
206 static DEFINE_PER_CPU(int, prof_old_multiplier
) = 1;
207 static DEFINE_PER_CPU(int, prof_counter
) = 1;
209 /* the map used to check if a CPU has booted */
210 static __u32 cpu_booted_map
;
212 /* the synchronize flag used to hold all secondary CPUs spinning in
213 * a tight loop until the boot sequence is ready for them */
214 static cpumask_t smp_commenced_mask
= CPU_MASK_NONE
;
216 /* This is for the new dynamic CPU boot code */
217 cpumask_t cpu_callin_map
= CPU_MASK_NONE
;
218 cpumask_t cpu_callout_map
= CPU_MASK_NONE
;
219 cpumask_t cpu_possible_map
= CPU_MASK_NONE
;
220 EXPORT_SYMBOL(cpu_possible_map
);
222 /* The per processor IRQ masks (these are usually kept in sync) */
223 static __u16 vic_irq_mask
[NR_CPUS
] __cacheline_aligned
;
225 /* the list of IRQs to be enabled by the VIC_ENABLE_IRQ_CPI */
226 static __u16 vic_irq_enable_mask
[NR_CPUS
] __cacheline_aligned
= { 0 };
228 /* Lock for enable/disable of VIC interrupts */
229 static __cacheline_aligned
DEFINE_SPINLOCK(vic_irq_lock
);
231 /* The boot processor is correctly set up in PC mode when it
232 * comes up, but the secondaries need their master/slave 8259
233 * pairs initializing correctly */
235 /* Interrupt counters (per cpu) and total - used to try to
236 * even up the interrupt handling routines */
237 static long vic_intr_total
= 0;
238 static long vic_intr_count
[NR_CPUS
] __cacheline_aligned
= { 0 };
239 static unsigned long vic_tick
[NR_CPUS
] __cacheline_aligned
= { 0 };
241 /* Since we can only use CPI0, we fake all the other CPIs */
242 static unsigned long vic_cpi_mailbox
[NR_CPUS
] __cacheline_aligned
;
244 /* debugging routine to read the isr of the cpu's pic */
245 static inline __u16
vic_read_isr(void)
250 isr
= inb(0xa0) << 8;
257 static __init
void qic_setup(void)
259 if (!is_cpu_quad()) {
260 /* not a quad, no setup */
263 outb(QIC_DEFAULT_MASK0
, QIC_MASK_REGISTER0
);
264 outb(QIC_CPI_ENABLE
, QIC_MASK_REGISTER1
);
266 if (is_cpu_extended()) {
267 /* the QIC duplicate of the VIC base register */
268 outb(VIC_DEFAULT_CPI_BASE
, QIC_VIC_CPI_BASE_REGISTER
);
269 outb(QIC_DEFAULT_CPI_BASE
, QIC_CPI_BASE_REGISTER
);
271 /* FIXME: should set up the QIC timer and memory parity
272 * error vectors here */
276 static __init
void vic_setup_pic(void)
278 outb(1, VIC_REDIRECT_REGISTER_1
);
279 /* clear the claim registers for dynamic routing */
280 outb(0, VIC_CLAIM_REGISTER_0
);
281 outb(0, VIC_CLAIM_REGISTER_1
);
283 outb(0, VIC_PRIORITY_REGISTER
);
284 /* Set the Primary and Secondary Microchannel vector
285 * bases to be the same as the ordinary interrupts
287 * FIXME: This would be more efficient using separate
289 outb(FIRST_EXTERNAL_VECTOR
, VIC_PRIMARY_MC_BASE
);
290 outb(FIRST_EXTERNAL_VECTOR
, VIC_SECONDARY_MC_BASE
);
291 /* Now initiallise the master PIC belonging to this CPU by
292 * sending the four ICWs */
294 /* ICW1: level triggered, ICW4 needed */
297 /* ICW2: vector base */
298 outb(FIRST_EXTERNAL_VECTOR
, 0x21);
300 /* ICW3: slave at line 2 */
303 /* ICW4: 8086 mode */
306 /* now the same for the slave PIC */
308 /* ICW1: level trigger, ICW4 needed */
311 /* ICW2: slave vector base */
312 outb(FIRST_EXTERNAL_VECTOR
+ 8, 0xA1);
317 /* ICW4: 8086 mode */
321 static void do_quad_bootstrap(void)
323 if (is_cpu_quad() && is_cpu_vic_boot()) {
326 __u8 cpuid
= hard_smp_processor_id();
328 local_irq_save(flags
);
330 for (i
= 0; i
< 4; i
++) {
331 /* FIXME: this would be >>3 &0x7 on the 32 way */
332 if (((cpuid
>> 2) & 0x03) == i
)
333 /* don't lower our own mask! */
336 /* masquerade as local Quad CPU */
337 outb(QIC_CPUID_ENABLE
| i
, QIC_PROCESSOR_ID
);
338 /* enable the startup CPI */
339 outb(QIC_BOOT_CPI_MASK
, QIC_MASK_REGISTER1
);
341 outb(0, QIC_PROCESSOR_ID
);
343 local_irq_restore(flags
);
347 /* Set up all the basic stuff: read the SMP config and make all the
348 * SMP information reflect only the boot cpu. All others will be
349 * brought on-line later. */
350 void __init
find_smp_config(void)
354 boot_cpu_id
= hard_smp_processor_id();
356 printk("VOYAGER SMP: Boot cpu is %d\n", boot_cpu_id
);
358 /* initialize the CPU structures (moved from smp_boot_cpus) */
359 for (i
= 0; i
< NR_CPUS
; i
++) {
360 cpu_irq_affinity
[i
] = ~0;
362 cpu_online_map
= cpumask_of_cpu(boot_cpu_id
);
364 /* The boot CPU must be extended */
365 voyager_extended_vic_processors
= 1 << boot_cpu_id
;
366 /* initially, all of the first 8 CPUs can boot */
367 voyager_allowed_boot_processors
= 0xff;
368 /* set up everything for just this CPU, we can alter
369 * this as we start the other CPUs later */
370 /* now get the CPU disposition from the extended CMOS */
371 cpus_addr(phys_cpu_present_map
)[0] =
372 voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK
);
373 cpus_addr(phys_cpu_present_map
)[0] |=
374 voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK
+ 1) << 8;
375 cpus_addr(phys_cpu_present_map
)[0] |=
376 voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK
+
378 cpus_addr(phys_cpu_present_map
)[0] |=
379 voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK
+
381 cpu_possible_map
= phys_cpu_present_map
;
382 printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n",
383 cpus_addr(phys_cpu_present_map
)[0]);
384 /* Here we set up the VIC to enable SMP */
385 /* enable the CPIs by writing the base vector to their register */
386 outb(VIC_DEFAULT_CPI_BASE
, VIC_CPI_BASE_REGISTER
);
387 outb(1, VIC_REDIRECT_REGISTER_1
);
388 /* set the claim registers for static routing --- Boot CPU gets
389 * all interrupts untill all other CPUs started */
390 outb(0xff, VIC_CLAIM_REGISTER_0
);
391 outb(0xff, VIC_CLAIM_REGISTER_1
);
392 /* Set the Primary and Secondary Microchannel vector
393 * bases to be the same as the ordinary interrupts
395 * FIXME: This would be more efficient using separate
397 outb(FIRST_EXTERNAL_VECTOR
, VIC_PRIMARY_MC_BASE
);
398 outb(FIRST_EXTERNAL_VECTOR
, VIC_SECONDARY_MC_BASE
);
400 /* Finally tell the firmware that we're driving */
401 outb(inb(VOYAGER_SUS_IN_CONTROL_PORT
) | VOYAGER_IN_CONTROL_FLAG
,
402 VOYAGER_SUS_IN_CONTROL_PORT
);
404 current_thread_info()->cpu
= boot_cpu_id
;
405 x86_write_percpu(cpu_number
, boot_cpu_id
);
409 * The bootstrap kernel entry code has set these up. Save them
410 * for a given CPU, id is physical */
411 void __init
smp_store_cpu_info(int id
)
413 struct cpuinfo_x86
*c
= &cpu_data(id
);
417 identify_secondary_cpu(c
);
420 /* Routine initially called when a non-boot CPU is brought online */
421 static void __init
start_secondary(void *unused
)
423 __u8 cpuid
= hard_smp_processor_id();
427 /* OK, we're in the routine */
428 ack_CPI(VIC_CPU_BOOT_CPI
);
430 /* setup the 8259 master slave pair belonging to this CPU ---
431 * we won't actually receive any until the boot CPU
432 * relinquishes it's static routing mask */
437 if (is_cpu_quad() && !is_cpu_vic_boot()) {
438 /* clear the boot CPI */
442 voyager_quad_cpi_addr
[cpuid
]->qic_cpi
[VIC_CPU_BOOT_CPI
].cpi
;
443 printk("read dummy %d\n", dummy
);
446 /* lower the mask to receive CPIs */
449 VDEBUG(("VOYAGER SMP: CPU%d, stack at about %p\n", cpuid
, &cpuid
));
451 /* enable interrupts */
454 /* get our bogomips */
457 /* save our processor parameters */
458 smp_store_cpu_info(cpuid
);
460 /* if we're a quad, we may need to bootstrap other CPUs */
463 /* FIXME: this is rather a poor hack to prevent the CPU
464 * activating softirqs while it's supposed to be waiting for
465 * permission to proceed. Without this, the new per CPU stuff
466 * in the softirqs will fail */
468 cpu_set(cpuid
, cpu_callin_map
);
470 /* signal that we're done */
473 while (!cpu_isset(cpuid
, smp_commenced_mask
))
479 cpu_set(cpuid
, cpu_online_map
);
484 /* Routine to kick start the given CPU and wait for it to report ready
485 * (or timeout in startup). When this routine returns, the requested
486 * CPU is either fully running and configured or known to be dead.
488 * We call this routine sequentially 1 CPU at a time, so no need for
491 static void __init
do_boot_cpu(__u8 cpu
)
493 struct task_struct
*idle
;
496 int quad_boot
= (1 << cpu
) & voyager_quad_processors
497 & ~(voyager_extended_vic_processors
498 & voyager_allowed_boot_processors
);
500 /* This is the format of the CPI IDT gate (in real mode) which
501 * we're hijacking to boot the CPU */
510 __u32
*hijack_vector
;
511 __u32 start_phys_address
= setup_trampoline();
513 /* There's a clever trick to this: The linux trampoline is
514 * compiled to begin at absolute location zero, so make the
515 * address zero but have the data segment selector compensate
516 * for the actual address */
517 hijack_source
.idt
.Offset
= start_phys_address
& 0x000F;
518 hijack_source
.idt
.Segment
= (start_phys_address
>> 4) & 0xFFFF;
521 alternatives_smp_switch(1);
523 idle
= fork_idle(cpu
);
525 panic("failed fork for CPU%d", cpu
);
526 idle
->thread
.ip
= (unsigned long)start_secondary
;
527 /* init_tasks (in sched.c) is indexed logically */
528 stack_start
.sp
= (void *)idle
->thread
.sp
;
531 per_cpu(current_task
, cpu
) = idle
;
532 early_gdt_descr
.address
= (unsigned long)get_cpu_gdt_table(cpu
);
535 /* Note: Don't modify initial ss override */
536 VDEBUG(("VOYAGER SMP: Booting CPU%d at 0x%lx[%x:%x], stack %p\n", cpu
,
537 (unsigned long)hijack_source
.val
, hijack_source
.idt
.Segment
,
538 hijack_source
.idt
.Offset
, stack_start
.sp
));
540 /* init lowmem identity mapping */
541 clone_pgd_range(swapper_pg_dir
, swapper_pg_dir
+ KERNEL_PGD_BOUNDARY
,
542 min_t(unsigned long, KERNEL_PGD_PTRS
, KERNEL_PGD_BOUNDARY
));
546 printk("CPU %d: non extended Quad boot\n", cpu
);
549 phys_to_virt((VIC_CPU_BOOT_CPI
+ QIC_DEFAULT_CPI_BASE
) * 4);
550 *hijack_vector
= hijack_source
.val
;
552 printk("CPU%d: extended VIC boot\n", cpu
);
555 phys_to_virt((VIC_CPU_BOOT_CPI
+ VIC_DEFAULT_CPI_BASE
) * 4);
556 *hijack_vector
= hijack_source
.val
;
557 /* VIC errata, may also receive interrupt at this address */
560 phys_to_virt((VIC_CPU_BOOT_ERRATA_CPI
+
561 VIC_DEFAULT_CPI_BASE
) * 4);
562 *hijack_vector
= hijack_source
.val
;
564 /* All non-boot CPUs start with interrupts fully masked. Need
565 * to lower the mask of the CPI we're about to send. We do
566 * this in the VIC by masquerading as the processor we're
567 * about to boot and lowering its interrupt mask */
568 local_irq_save(flags
);
570 send_one_QIC_CPI(cpu
, VIC_CPU_BOOT_CPI
);
572 outb(VIC_CPU_MASQUERADE_ENABLE
| cpu
, VIC_PROCESSOR_ID
);
573 /* here we're altering registers belonging to `cpu' */
575 outb(VIC_BOOT_INTERRUPT_MASK
, 0x21);
576 /* now go back to our original identity */
577 outb(boot_cpu_id
, VIC_PROCESSOR_ID
);
579 /* and boot the CPU */
581 send_CPI((1 << cpu
), VIC_CPU_BOOT_CPI
);
584 local_irq_restore(flags
);
586 /* now wait for it to become ready (or timeout) */
587 for (timeout
= 0; timeout
< 50000; timeout
++) {
592 /* reset the page table */
595 if (cpu_booted_map
) {
596 VDEBUG(("CPU%d: Booted successfully, back in CPU %d\n",
597 cpu
, smp_processor_id()));
599 printk("CPU%d: ", cpu
);
600 print_cpu_info(&cpu_data(cpu
));
602 cpu_set(cpu
, cpu_callout_map
);
603 cpu_set(cpu
, cpu_present_map
);
605 printk("CPU%d FAILED TO BOOT: ", cpu
);
607 ((volatile unsigned char *)phys_to_virt(start_phys_address
))
611 printk("Not responding.\n");
617 void __init
smp_boot_cpus(void)
621 /* CAT BUS initialisation must be done after the memory */
622 /* FIXME: The L4 has a catbus too, it just needs to be
623 * accessed in a totally different way */
624 if (voyager_level
== 5) {
627 /* now that the cat has probed the Voyager System Bus, sanity
628 * check the cpu map */
629 if (((voyager_quad_processors
| voyager_extended_vic_processors
)
630 & cpus_addr(phys_cpu_present_map
)[0]) !=
631 cpus_addr(phys_cpu_present_map
)[0]) {
633 printk("\n\n***WARNING*** "
634 "Sanity check of CPU present map FAILED\n");
636 } else if (voyager_level
== 4)
637 voyager_extended_vic_processors
=
638 cpus_addr(phys_cpu_present_map
)[0];
640 /* this sets up the idle task to run on the current cpu */
641 voyager_extended_cpus
= 1;
642 /* Remove the global_irq_holder setting, it triggers a BUG() on
643 * schedule at the moment */
644 //global_irq_holder = boot_cpu_id;
646 /* FIXME: Need to do something about this but currently only works
647 * on CPUs with a tsc which none of mine have.
648 smp_tune_scheduling();
650 smp_store_cpu_info(boot_cpu_id
);
651 printk("CPU%d: ", boot_cpu_id
);
652 print_cpu_info(&cpu_data(boot_cpu_id
));
655 /* booting on a Quad CPU */
656 printk("VOYAGER SMP: Boot CPU is Quad\n");
661 /* enable our own CPIs */
664 cpu_set(boot_cpu_id
, cpu_online_map
);
665 cpu_set(boot_cpu_id
, cpu_callout_map
);
667 /* loop over all the extended VIC CPUs and boot them. The
668 * Quad CPUs must be bootstrapped by their extended VIC cpu */
669 for (i
= 0; i
< NR_CPUS
; i
++) {
670 if (i
== boot_cpu_id
|| !cpu_isset(i
, phys_cpu_present_map
))
673 /* This udelay seems to be needed for the Quad boots
674 * don't remove unless you know what you're doing */
677 /* we could compute the total bogomips here, but why bother?,
678 * Code added from smpboot.c */
680 unsigned long bogosum
= 0;
682 for_each_online_cpu(i
)
683 bogosum
+= cpu_data(i
).loops_per_jiffy
;
684 printk(KERN_INFO
"Total of %d processors activated "
685 "(%lu.%02lu BogoMIPS).\n",
686 cpucount
+ 1, bogosum
/ (500000 / HZ
),
687 (bogosum
/ (5000 / HZ
)) % 100);
689 voyager_extended_cpus
= hweight32(voyager_extended_vic_processors
);
690 printk("VOYAGER: Extended (interrupt handling CPUs): "
691 "%d, non-extended: %d\n", voyager_extended_cpus
,
692 num_booting_cpus() - voyager_extended_cpus
);
693 /* that's it, switch to symmetric mode */
694 outb(0, VIC_PRIORITY_REGISTER
);
695 outb(0, VIC_CLAIM_REGISTER_0
);
696 outb(0, VIC_CLAIM_REGISTER_1
);
698 VDEBUG(("VOYAGER SMP: Booted with %d CPUs\n", num_booting_cpus()));
701 /* Reload the secondary CPUs task structure (this function does not
703 void __init
initialize_secondary(void)
707 set_current(hard_get_current());
711 * We don't actually need to load the full TSS,
712 * basically just the stack pointer and the eip.
715 asm volatile ("movl %0,%%esp\n\t"
716 "jmp *%1"::"r" (current
->thread
.sp
),
717 "r"(current
->thread
.ip
));
720 /* handle a Voyager SYS_INT -- If we don't, the base board will
723 * System interrupts occur because some problem was detected on the
724 * various busses. To find out what you have to probe all the
725 * hardware via the CAT bus. FIXME: At the moment we do nothing. */
726 void smp_vic_sys_interrupt(struct pt_regs
*regs
)
728 ack_CPI(VIC_SYS_INT
);
729 printk("Voyager SYSTEM INTERRUPT\n");
732 /* Handle a voyager CMN_INT; These interrupts occur either because of
733 * a system status change or because a single bit memory error
734 * occurred. FIXME: At the moment, ignore all this. */
735 void smp_vic_cmn_interrupt(struct pt_regs
*regs
)
737 static __u8 in_cmn_int
= 0;
738 static DEFINE_SPINLOCK(cmn_int_lock
);
740 /* common ints are broadcast, so make sure we only do this once */
741 _raw_spin_lock(&cmn_int_lock
);
746 _raw_spin_unlock(&cmn_int_lock
);
748 VDEBUG(("Voyager COMMON INTERRUPT\n"));
750 if (voyager_level
== 5)
751 voyager_cat_do_common_interrupt();
753 _raw_spin_lock(&cmn_int_lock
);
756 _raw_spin_unlock(&cmn_int_lock
);
757 ack_CPI(VIC_CMN_INT
);
761 * Reschedule call back. Nothing to do, all the work is done
762 * automatically when we return from the interrupt. */
763 static void smp_reschedule_interrupt(void)
768 static struct mm_struct
*flush_mm
;
769 static unsigned long flush_va
;
770 static DEFINE_SPINLOCK(tlbstate_lock
);
773 * We cannot call mmdrop() because we are in interrupt context,
774 * instead update mm->cpu_vm_mask.
776 * We need to reload %cr3 since the page tables may be going
777 * away from under us..
779 static inline void voyager_leave_mm(unsigned long cpu
)
781 if (per_cpu(cpu_tlbstate
, cpu
).state
== TLBSTATE_OK
)
783 cpu_clear(cpu
, per_cpu(cpu_tlbstate
, cpu
).active_mm
->cpu_vm_mask
);
784 load_cr3(swapper_pg_dir
);
788 * Invalidate call-back
790 static void smp_invalidate_interrupt(void)
792 __u8 cpu
= smp_processor_id();
794 if (!test_bit(cpu
, &smp_invalidate_needed
))
796 /* This will flood messages. Don't uncomment unless you see
797 * Problems with cross cpu invalidation
798 VDEBUG(("VOYAGER SMP: CPU%d received INVALIDATE_CPI\n",
799 smp_processor_id()));
802 if (flush_mm
== per_cpu(cpu_tlbstate
, cpu
).active_mm
) {
803 if (per_cpu(cpu_tlbstate
, cpu
).state
== TLBSTATE_OK
) {
804 if (flush_va
== TLB_FLUSH_ALL
)
807 __flush_tlb_one(flush_va
);
809 voyager_leave_mm(cpu
);
811 smp_mb__before_clear_bit();
812 clear_bit(cpu
, &smp_invalidate_needed
);
813 smp_mb__after_clear_bit();
816 /* All the new flush operations for 2.4 */
818 /* This routine is called with a physical cpu mask */
820 voyager_flush_tlb_others(unsigned long cpumask
, struct mm_struct
*mm
,
827 if ((cpumask
& cpus_addr(cpu_online_map
)[0]) != cpumask
)
829 if (cpumask
& (1 << smp_processor_id()))
834 spin_lock(&tlbstate_lock
);
838 atomic_set_mask(cpumask
, &smp_invalidate_needed
);
840 * We have to send the CPI only to
843 send_CPI(cpumask
, VIC_INVALIDATE_CPI
);
845 while (smp_invalidate_needed
) {
848 printk("***WARNING*** Stuck doing invalidate CPI "
849 "(CPU%d)\n", smp_processor_id());
854 /* Uncomment only to debug invalidation problems
855 VDEBUG(("VOYAGER SMP: Completed invalidate CPI (CPU%d)\n", cpu));
860 spin_unlock(&tlbstate_lock
);
863 void flush_tlb_current_task(void)
865 struct mm_struct
*mm
= current
->mm
;
866 unsigned long cpu_mask
;
870 cpu_mask
= cpus_addr(mm
->cpu_vm_mask
)[0] & ~(1 << smp_processor_id());
873 voyager_flush_tlb_others(cpu_mask
, mm
, TLB_FLUSH_ALL
);
878 void flush_tlb_mm(struct mm_struct
*mm
)
880 unsigned long cpu_mask
;
884 cpu_mask
= cpus_addr(mm
->cpu_vm_mask
)[0] & ~(1 << smp_processor_id());
886 if (current
->active_mm
== mm
) {
890 voyager_leave_mm(smp_processor_id());
893 voyager_flush_tlb_others(cpu_mask
, mm
, TLB_FLUSH_ALL
);
898 void flush_tlb_page(struct vm_area_struct
*vma
, unsigned long va
)
900 struct mm_struct
*mm
= vma
->vm_mm
;
901 unsigned long cpu_mask
;
905 cpu_mask
= cpus_addr(mm
->cpu_vm_mask
)[0] & ~(1 << smp_processor_id());
906 if (current
->active_mm
== mm
) {
910 voyager_leave_mm(smp_processor_id());
914 voyager_flush_tlb_others(cpu_mask
, mm
, va
);
919 EXPORT_SYMBOL(flush_tlb_page
);
921 /* enable the requested IRQs */
922 static void smp_enable_irq_interrupt(void)
925 __u8 cpu
= get_cpu();
927 VDEBUG(("VOYAGER SMP: CPU%d enabling irq mask 0x%x\n", cpu
,
928 vic_irq_enable_mask
[cpu
]));
930 spin_lock(&vic_irq_lock
);
931 for (irq
= 0; irq
< 16; irq
++) {
932 if (vic_irq_enable_mask
[cpu
] & (1 << irq
))
933 enable_local_vic_irq(irq
);
935 vic_irq_enable_mask
[cpu
] = 0;
936 spin_unlock(&vic_irq_lock
);
938 put_cpu_no_resched();
944 static void smp_stop_cpu_function(void *dummy
)
946 VDEBUG(("VOYAGER SMP: CPU%d is STOPPING\n", smp_processor_id()));
947 cpu_clear(smp_processor_id(), cpu_online_map
);
953 static DEFINE_SPINLOCK(call_lock
);
955 struct call_data_struct
{
956 void (*func
) (void *info
);
958 volatile unsigned long started
;
959 volatile unsigned long finished
;
963 static struct call_data_struct
*call_data
;
965 /* execute a thread on a new CPU. The function to be called must be
966 * previously set up. This is used to schedule a function for
967 * execution on all CPUs - set up the function then broadcast a
968 * function_interrupt CPI to come here on each CPU */
969 static void smp_call_function_interrupt(void)
971 void (*func
) (void *info
) = call_data
->func
;
972 void *info
= call_data
->info
;
973 /* must take copy of wait because call_data may be replaced
974 * unless the function is waiting for us to finish */
975 int wait
= call_data
->wait
;
976 __u8 cpu
= smp_processor_id();
979 * Notify initiating CPU that I've grabbed the data and am
980 * about to execute the function
983 if (!test_and_clear_bit(cpu
, &call_data
->started
)) {
984 /* If the bit wasn't set, this could be a replay */
985 printk(KERN_WARNING
"VOYAGER SMP: CPU %d received call funtion"
986 " with no call pending\n", cpu
);
990 * At this point the info structure may be out of scope unless wait==1
994 __get_cpu_var(irq_stat
).irq_call_count
++;
998 clear_bit(cpu
, &call_data
->finished
);
1003 voyager_smp_call_function_mask(cpumask_t cpumask
,
1004 void (*func
) (void *info
), void *info
, int wait
)
1006 struct call_data_struct data
;
1007 u32 mask
= cpus_addr(cpumask
)[0];
1009 mask
&= ~(1 << smp_processor_id());
1014 /* Can deadlock when called with interrupts disabled */
1015 WARN_ON(irqs_disabled());
1019 data
.started
= mask
;
1022 data
.finished
= mask
;
1024 spin_lock(&call_lock
);
1027 /* Send a message to all other CPUs and wait for them to respond */
1028 send_CPI(mask
, VIC_CALL_FUNCTION_CPI
);
1030 /* Wait for response */
1031 while (data
.started
)
1035 while (data
.finished
)
1038 spin_unlock(&call_lock
);
1043 /* Sorry about the name. In an APIC based system, the APICs
1044 * themselves are programmed to send a timer interrupt. This is used
1045 * by linux to reschedule the processor. Voyager doesn't have this,
1046 * so we use the system clock to interrupt one processor, which in
1047 * turn, broadcasts a timer CPI to all the others --- we receive that
1048 * CPI here. We don't use this actually for counting so losing
1049 * ticks doesn't matter
1051 * FIXME: For those CPUs which actually have a local APIC, we could
1052 * try to use it to trigger this interrupt instead of having to
1053 * broadcast the timer tick. Unfortunately, all my pentium DYADs have
1054 * no local APIC, so I can't do this
1056 * This function is currently a placeholder and is unused in the code */
1057 void smp_apic_timer_interrupt(struct pt_regs
*regs
)
1059 struct pt_regs
*old_regs
= set_irq_regs(regs
);
1060 wrapper_smp_local_timer_interrupt();
1061 set_irq_regs(old_regs
);
1064 /* All of the QUAD interrupt GATES */
1065 void smp_qic_timer_interrupt(struct pt_regs
*regs
)
1067 struct pt_regs
*old_regs
= set_irq_regs(regs
);
1068 ack_QIC_CPI(QIC_TIMER_CPI
);
1069 wrapper_smp_local_timer_interrupt();
1070 set_irq_regs(old_regs
);
1073 void smp_qic_invalidate_interrupt(struct pt_regs
*regs
)
1075 ack_QIC_CPI(QIC_INVALIDATE_CPI
);
1076 smp_invalidate_interrupt();
1079 void smp_qic_reschedule_interrupt(struct pt_regs
*regs
)
1081 ack_QIC_CPI(QIC_RESCHEDULE_CPI
);
1082 smp_reschedule_interrupt();
1085 void smp_qic_enable_irq_interrupt(struct pt_regs
*regs
)
1087 ack_QIC_CPI(QIC_ENABLE_IRQ_CPI
);
1088 smp_enable_irq_interrupt();
1091 void smp_qic_call_function_interrupt(struct pt_regs
*regs
)
1093 ack_QIC_CPI(QIC_CALL_FUNCTION_CPI
);
1094 smp_call_function_interrupt();
1097 void smp_vic_cpi_interrupt(struct pt_regs
*regs
)
1099 struct pt_regs
*old_regs
= set_irq_regs(regs
);
1100 __u8 cpu
= smp_processor_id();
1103 ack_QIC_CPI(VIC_CPI_LEVEL0
);
1105 ack_VIC_CPI(VIC_CPI_LEVEL0
);
1107 if (test_and_clear_bit(VIC_TIMER_CPI
, &vic_cpi_mailbox
[cpu
]))
1108 wrapper_smp_local_timer_interrupt();
1109 if (test_and_clear_bit(VIC_INVALIDATE_CPI
, &vic_cpi_mailbox
[cpu
]))
1110 smp_invalidate_interrupt();
1111 if (test_and_clear_bit(VIC_RESCHEDULE_CPI
, &vic_cpi_mailbox
[cpu
]))
1112 smp_reschedule_interrupt();
1113 if (test_and_clear_bit(VIC_ENABLE_IRQ_CPI
, &vic_cpi_mailbox
[cpu
]))
1114 smp_enable_irq_interrupt();
1115 if (test_and_clear_bit(VIC_CALL_FUNCTION_CPI
, &vic_cpi_mailbox
[cpu
]))
1116 smp_call_function_interrupt();
1117 set_irq_regs(old_regs
);
1120 static void do_flush_tlb_all(void *info
)
1122 unsigned long cpu
= smp_processor_id();
1125 if (per_cpu(cpu_tlbstate
, cpu
).state
== TLBSTATE_LAZY
)
1126 voyager_leave_mm(cpu
);
1129 /* flush the TLB of every active CPU in the system */
1130 void flush_tlb_all(void)
1132 on_each_cpu(do_flush_tlb_all
, 0, 1, 1);
1135 /* send a reschedule CPI to one CPU by physical CPU number*/
1136 static void voyager_smp_send_reschedule(int cpu
)
1138 send_one_CPI(cpu
, VIC_RESCHEDULE_CPI
);
1141 int hard_smp_processor_id(void)
1144 __u8 cpumask
= inb(VIC_PROC_WHO_AM_I
);
1145 if ((cpumask
& QUAD_IDENTIFIER
) == QUAD_IDENTIFIER
)
1146 return cpumask
& 0x1F;
1148 for (i
= 0; i
< 8; i
++) {
1149 if (cpumask
& (1 << i
))
1152 printk("** WARNING ** Illegal cpuid returned by VIC: %d", cpumask
);
1156 int safe_smp_processor_id(void)
1158 return hard_smp_processor_id();
1161 /* broadcast a halt to all other CPUs */
1162 static void voyager_smp_send_stop(void)
1164 smp_call_function(smp_stop_cpu_function
, NULL
, 1, 1);
1167 /* this function is triggered in time.c when a clock tick fires
1168 * we need to re-broadcast the tick to all CPUs */
1169 void smp_vic_timer_interrupt(void)
1171 send_CPI_allbutself(VIC_TIMER_CPI
);
1172 smp_local_timer_interrupt();
1175 /* local (per CPU) timer interrupt. It does both profiling and
1176 * process statistics/rescheduling.
1178 * We do profiling in every local tick, statistics/rescheduling
1179 * happen only every 'profiling multiplier' ticks. The default
1180 * multiplier is 1 and it can be changed by writing the new multiplier
1181 * value into /proc/profile.
1183 void smp_local_timer_interrupt(void)
1185 int cpu
= smp_processor_id();
1188 profile_tick(CPU_PROFILING
);
1189 if (--per_cpu(prof_counter
, cpu
) <= 0) {
1191 * The multiplier may have changed since the last time we got
1192 * to this point as a result of the user writing to
1193 * /proc/profile. In this case we need to adjust the APIC
1194 * timer accordingly.
1196 * Interrupts are already masked off at this point.
1198 per_cpu(prof_counter
, cpu
) = per_cpu(prof_multiplier
, cpu
);
1199 if (per_cpu(prof_counter
, cpu
) !=
1200 per_cpu(prof_old_multiplier
, cpu
)) {
1201 /* FIXME: need to update the vic timer tick here */
1202 per_cpu(prof_old_multiplier
, cpu
) =
1203 per_cpu(prof_counter
, cpu
);
1206 update_process_times(user_mode_vm(get_irq_regs()));
1209 if (((1 << cpu
) & voyager_extended_vic_processors
) == 0)
1210 /* only extended VIC processors participate in
1211 * interrupt distribution */
1215 * We take the 'long' return path, and there every subsystem
1216 * grabs the appropriate locks (kernel lock/ irq lock).
1218 * we might want to decouple profiling from the 'long path',
1219 * and do the profiling totally in assembly.
1221 * Currently this isn't too much of an issue (performance wise),
1222 * we can take more than 100K local irqs per second on a 100 MHz P5.
1225 if ((++vic_tick
[cpu
] & 0x7) != 0)
1227 /* get here every 16 ticks (about every 1/6 of a second) */
1229 /* Change our priority to give someone else a chance at getting
1230 * the IRQ. The algorithm goes like this:
1232 * In the VIC, the dynamically routed interrupt is always
1233 * handled by the lowest priority eligible (i.e. receiving
1234 * interrupts) CPU. If >1 eligible CPUs are equal lowest, the
1235 * lowest processor number gets it.
1237 * The priority of a CPU is controlled by a special per-CPU
1238 * VIC priority register which is 3 bits wide 0 being lowest
1239 * and 7 highest priority..
1241 * Therefore we subtract the average number of interrupts from
1242 * the number we've fielded. If this number is negative, we
1243 * lower the activity count and if it is positive, we raise
1246 * I'm afraid this still leads to odd looking interrupt counts:
1247 * the totals are all roughly equal, but the individual ones
1248 * look rather skewed.
1250 * FIXME: This algorithm is total crap when mixed with SMP
1251 * affinity code since we now try to even up the interrupt
1252 * counts when an affinity binding is keeping them on a
1254 weight
= (vic_intr_count
[cpu
] * voyager_extended_cpus
1255 - vic_intr_total
) >> 4;
1262 outb((__u8
) weight
, VIC_PRIORITY_REGISTER
);
1264 #ifdef VOYAGER_DEBUG
1265 if ((vic_tick
[cpu
] & 0xFFF) == 0) {
1266 /* print this message roughly every 25 secs */
1267 printk("VOYAGER SMP: vic_tick[%d] = %lu, weight = %ld\n",
1268 cpu
, vic_tick
[cpu
], weight
);
1273 /* setup the profiling timer */
1274 int setup_profiling_timer(unsigned int multiplier
)
1282 * Set the new multiplier for each CPU. CPUs don't start using the
1283 * new values until the next timer interrupt in which they do process
1286 for (i
= 0; i
< NR_CPUS
; ++i
)
1287 per_cpu(prof_multiplier
, i
) = multiplier
;
1292 /* This is a bit of a mess, but forced on us by the genirq changes
1293 * there's no genirq handler that really does what voyager wants
1294 * so hack it up with the simple IRQ handler */
1295 static void handle_vic_irq(unsigned int irq
, struct irq_desc
*desc
)
1297 before_handle_vic_irq(irq
);
1298 handle_simple_irq(irq
, desc
);
1299 after_handle_vic_irq(irq
);
1302 /* The CPIs are handled in the per cpu 8259s, so they must be
1303 * enabled to be received: FIX: enabling the CPIs in the early
1304 * boot sequence interferes with bug checking; enable them later
1306 #define VIC_SET_GATE(cpi, vector) \
1307 set_intr_gate((cpi) + VIC_DEFAULT_CPI_BASE, (vector))
1308 #define QIC_SET_GATE(cpi, vector) \
1309 set_intr_gate((cpi) + QIC_DEFAULT_CPI_BASE, (vector))
1311 void __init
smp_intr_init(void)
1315 /* initialize the per cpu irq mask to all disabled */
1316 for (i
= 0; i
< NR_CPUS
; i
++)
1317 vic_irq_mask
[i
] = 0xFFFF;
1319 VIC_SET_GATE(VIC_CPI_LEVEL0
, vic_cpi_interrupt
);
1321 VIC_SET_GATE(VIC_SYS_INT
, vic_sys_interrupt
);
1322 VIC_SET_GATE(VIC_CMN_INT
, vic_cmn_interrupt
);
1324 QIC_SET_GATE(QIC_TIMER_CPI
, qic_timer_interrupt
);
1325 QIC_SET_GATE(QIC_INVALIDATE_CPI
, qic_invalidate_interrupt
);
1326 QIC_SET_GATE(QIC_RESCHEDULE_CPI
, qic_reschedule_interrupt
);
1327 QIC_SET_GATE(QIC_ENABLE_IRQ_CPI
, qic_enable_irq_interrupt
);
1328 QIC_SET_GATE(QIC_CALL_FUNCTION_CPI
, qic_call_function_interrupt
);
1330 /* now put the VIC descriptor into the first 48 IRQs
1332 * This is for later: first 16 correspond to PC IRQs; next 16
1333 * are Primary MC IRQs and final 16 are Secondary MC IRQs */
1334 for (i
= 0; i
< 48; i
++)
1335 set_irq_chip_and_handler(i
, &vic_chip
, handle_vic_irq
);
1338 /* send a CPI at level cpi to a set of cpus in cpuset (set 1 bit per
1339 * processor to receive CPI */
1340 static void send_CPI(__u32 cpuset
, __u8 cpi
)
1343 __u32 quad_cpuset
= (cpuset
& voyager_quad_processors
);
1345 if (cpi
< VIC_START_FAKE_CPI
) {
1346 /* fake CPI are only used for booting, so send to the
1347 * extended quads as well---Quads must be VIC booted */
1348 outb((__u8
) (cpuset
), VIC_CPI_Registers
[cpi
]);
1352 send_QIC_CPI(quad_cpuset
, cpi
);
1353 cpuset
&= ~quad_cpuset
;
1354 cpuset
&= 0xff; /* only first 8 CPUs vaild for VIC CPI */
1357 for_each_online_cpu(cpu
) {
1358 if (cpuset
& (1 << cpu
))
1359 set_bit(cpi
, &vic_cpi_mailbox
[cpu
]);
1362 outb((__u8
) cpuset
, VIC_CPI_Registers
[VIC_CPI_LEVEL0
]);
1365 /* Acknowledge receipt of CPI in the QIC, clear in QIC hardware and
1366 * set the cache line to shared by reading it.
1368 * DON'T make this inline otherwise the cache line read will be
1371 static int ack_QIC_CPI(__u8 cpi
)
1373 __u8 cpu
= hard_smp_processor_id();
1377 outb(1 << cpi
, QIC_INTERRUPT_CLEAR1
);
1378 return voyager_quad_cpi_addr
[cpu
]->qic_cpi
[cpi
].cpi
;
1381 static void ack_special_QIC_CPI(__u8 cpi
)
1385 outb(QIC_CMN_INT
, QIC_INTERRUPT_CLEAR0
);
1388 outb(QIC_SYS_INT
, QIC_INTERRUPT_CLEAR0
);
1391 /* also clear at the VIC, just in case (nop for non-extended proc) */
1395 /* Acknowledge receipt of CPI in the VIC (essentially an EOI) */
1396 static void ack_VIC_CPI(__u8 cpi
)
1398 #ifdef VOYAGER_DEBUG
1399 unsigned long flags
;
1401 __u8 cpu
= smp_processor_id();
1403 local_irq_save(flags
);
1404 isr
= vic_read_isr();
1405 if ((isr
& (1 << (cpi
& 7))) == 0) {
1406 printk("VOYAGER SMP: CPU%d lost CPI%d\n", cpu
, cpi
);
1409 /* send specific EOI; the two system interrupts have
1410 * bit 4 set for a separate vector but behave as the
1411 * corresponding 3 bit intr */
1412 outb_p(0x60 | (cpi
& 7), 0x20);
1414 #ifdef VOYAGER_DEBUG
1415 if ((vic_read_isr() & (1 << (cpi
& 7))) != 0) {
1416 printk("VOYAGER SMP: CPU%d still asserting CPI%d\n", cpu
, cpi
);
1418 local_irq_restore(flags
);
1422 /* cribbed with thanks from irq.c */
1423 #define __byte(x,y) (((unsigned char *)&(y))[x])
1424 #define cached_21(cpu) (__byte(0,vic_irq_mask[cpu]))
1425 #define cached_A1(cpu) (__byte(1,vic_irq_mask[cpu]))
1427 static unsigned int startup_vic_irq(unsigned int irq
)
1429 unmask_vic_irq(irq
);
1434 /* The enable and disable routines. This is where we run into
1435 * conflicting architectural philosophy. Fundamentally, the voyager
1436 * architecture does not expect to have to disable interrupts globally
1437 * (the IRQ controllers belong to each CPU). The processor masquerade
1438 * which is used to start the system shouldn't be used in a running OS
1439 * since it will cause great confusion if two separate CPUs drive to
1440 * the same IRQ controller (I know, I've tried it).
1442 * The solution is a variant on the NCR lazy SPL design:
1444 * 1) To disable an interrupt, do nothing (other than set the
1445 * IRQ_DISABLED flag). This dares the interrupt actually to arrive.
1447 * 2) If the interrupt dares to come in, raise the local mask against
1448 * it (this will result in all the CPU masks being raised
1451 * 3) To enable the interrupt, lower the mask on the local CPU and
1452 * broadcast an Interrupt enable CPI which causes all other CPUs to
1453 * adjust their masks accordingly. */
1455 static void unmask_vic_irq(unsigned int irq
)
1457 /* linux doesn't to processor-irq affinity, so enable on
1458 * all CPUs we know about */
1459 int cpu
= smp_processor_id(), real_cpu
;
1460 __u16 mask
= (1 << irq
);
1461 __u32 processorList
= 0;
1462 unsigned long flags
;
1464 VDEBUG(("VOYAGER: unmask_vic_irq(%d) CPU%d affinity 0x%lx\n",
1465 irq
, cpu
, cpu_irq_affinity
[cpu
]));
1466 spin_lock_irqsave(&vic_irq_lock
, flags
);
1467 for_each_online_cpu(real_cpu
) {
1468 if (!(voyager_extended_vic_processors
& (1 << real_cpu
)))
1470 if (!(cpu_irq_affinity
[real_cpu
] & mask
)) {
1471 /* irq has no affinity for this CPU, ignore */
1474 if (real_cpu
== cpu
) {
1475 enable_local_vic_irq(irq
);
1476 } else if (vic_irq_mask
[real_cpu
] & mask
) {
1477 vic_irq_enable_mask
[real_cpu
] |= mask
;
1478 processorList
|= (1 << real_cpu
);
1481 spin_unlock_irqrestore(&vic_irq_lock
, flags
);
1483 send_CPI(processorList
, VIC_ENABLE_IRQ_CPI
);
1486 static void mask_vic_irq(unsigned int irq
)
1488 /* lazy disable, do nothing */
1491 static void enable_local_vic_irq(unsigned int irq
)
1493 __u8 cpu
= smp_processor_id();
1494 __u16 mask
= ~(1 << irq
);
1495 __u16 old_mask
= vic_irq_mask
[cpu
];
1497 vic_irq_mask
[cpu
] &= mask
;
1498 if (vic_irq_mask
[cpu
] == old_mask
)
1501 VDEBUG(("VOYAGER DEBUG: Enabling irq %d in hardware on CPU %d\n",
1505 outb_p(cached_A1(cpu
), 0xA1);
1508 outb_p(cached_21(cpu
), 0x21);
1513 static void disable_local_vic_irq(unsigned int irq
)
1515 __u8 cpu
= smp_processor_id();
1516 __u16 mask
= (1 << irq
);
1517 __u16 old_mask
= vic_irq_mask
[cpu
];
1522 vic_irq_mask
[cpu
] |= mask
;
1523 if (old_mask
== vic_irq_mask
[cpu
])
1526 VDEBUG(("VOYAGER DEBUG: Disabling irq %d in hardware on CPU %d\n",
1530 outb_p(cached_A1(cpu
), 0xA1);
1533 outb_p(cached_21(cpu
), 0x21);
1538 /* The VIC is level triggered, so the ack can only be issued after the
1539 * interrupt completes. However, we do Voyager lazy interrupt
1540 * handling here: It is an extremely expensive operation to mask an
1541 * interrupt in the vic, so we merely set a flag (IRQ_DISABLED). If
1542 * this interrupt actually comes in, then we mask and ack here to push
1543 * the interrupt off to another CPU */
1544 static void before_handle_vic_irq(unsigned int irq
)
1546 irq_desc_t
*desc
= irq_desc
+ irq
;
1547 __u8 cpu
= smp_processor_id();
1549 _raw_spin_lock(&vic_irq_lock
);
1551 vic_intr_count
[cpu
]++;
1553 if (!(cpu_irq_affinity
[cpu
] & (1 << irq
))) {
1554 /* The irq is not in our affinity mask, push it off
1555 * onto another CPU */
1556 VDEBUG(("VOYAGER DEBUG: affinity triggered disable of irq %d "
1557 "on cpu %d\n", irq
, cpu
));
1558 disable_local_vic_irq(irq
);
1559 /* set IRQ_INPROGRESS to prevent the handler in irq.c from
1560 * actually calling the interrupt routine */
1561 desc
->status
|= IRQ_REPLAY
| IRQ_INPROGRESS
;
1562 } else if (desc
->status
& IRQ_DISABLED
) {
1563 /* Damn, the interrupt actually arrived, do the lazy
1564 * disable thing. The interrupt routine in irq.c will
1565 * not handle a IRQ_DISABLED interrupt, so nothing more
1566 * need be done here */
1567 VDEBUG(("VOYAGER DEBUG: lazy disable of irq %d on CPU %d\n",
1569 disable_local_vic_irq(irq
);
1570 desc
->status
|= IRQ_REPLAY
;
1572 desc
->status
&= ~IRQ_REPLAY
;
1575 _raw_spin_unlock(&vic_irq_lock
);
1578 /* Finish the VIC interrupt: basically mask */
1579 static void after_handle_vic_irq(unsigned int irq
)
1581 irq_desc_t
*desc
= irq_desc
+ irq
;
1583 _raw_spin_lock(&vic_irq_lock
);
1585 unsigned int status
= desc
->status
& ~IRQ_INPROGRESS
;
1586 #ifdef VOYAGER_DEBUG
1590 desc
->status
= status
;
1591 if ((status
& IRQ_DISABLED
))
1592 disable_local_vic_irq(irq
);
1593 #ifdef VOYAGER_DEBUG
1594 /* DEBUG: before we ack, check what's in progress */
1595 isr
= vic_read_isr();
1596 if ((isr
& (1 << irq
) && !(status
& IRQ_REPLAY
)) == 0) {
1598 __u8 cpu
= smp_processor_id();
1600 int mask
; /* Um... initialize me??? --RR */
1602 printk("VOYAGER SMP: CPU%d lost interrupt %d\n",
1604 for_each_possible_cpu(real_cpu
, mask
) {
1606 outb(VIC_CPU_MASQUERADE_ENABLE
| real_cpu
,
1608 isr
= vic_read_isr();
1609 if (isr
& (1 << irq
)) {
1611 ("VOYAGER SMP: CPU%d ack irq %d\n",
1615 outb(cpu
, VIC_PROCESSOR_ID
);
1618 #endif /* VOYAGER_DEBUG */
1619 /* as soon as we ack, the interrupt is eligible for
1620 * receipt by another CPU so everything must be in
1623 if (status
& IRQ_REPLAY
) {
1624 /* replay is set if we disable the interrupt
1625 * in the before_handle_vic_irq() routine, so
1626 * clear the in progress bit here to allow the
1627 * next CPU to handle this correctly */
1628 desc
->status
&= ~(IRQ_REPLAY
| IRQ_INPROGRESS
);
1630 #ifdef VOYAGER_DEBUG
1631 isr
= vic_read_isr();
1632 if ((isr
& (1 << irq
)) != 0)
1633 printk("VOYAGER SMP: after_handle_vic_irq() after "
1634 "ack irq=%d, isr=0x%x\n", irq
, isr
);
1635 #endif /* VOYAGER_DEBUG */
1637 _raw_spin_unlock(&vic_irq_lock
);
1639 /* All code after this point is out of the main path - the IRQ
1640 * may be intercepted by another CPU if reasserted */
1643 /* Linux processor - interrupt affinity manipulations.
1645 * For each processor, we maintain a 32 bit irq affinity mask.
1646 * Initially it is set to all 1's so every processor accepts every
1647 * interrupt. In this call, we change the processor's affinity mask:
1649 * Change from enable to disable:
1651 * If the interrupt ever comes in to the processor, we will disable it
1652 * and ack it to push it off to another CPU, so just accept the mask here.
1654 * Change from disable to enable:
1656 * change the mask and then do an interrupt enable CPI to re-enable on
1657 * the selected processors */
1659 void set_vic_irq_affinity(unsigned int irq
, cpumask_t mask
)
1661 /* Only extended processors handle interrupts */
1662 unsigned long real_mask
;
1663 unsigned long irq_mask
= 1 << irq
;
1666 real_mask
= cpus_addr(mask
)[0] & voyager_extended_vic_processors
;
1668 if (cpus_addr(mask
)[0] == 0)
1669 /* can't have no CPUs to accept the interrupt -- extremely
1670 * bad things will happen */
1674 /* can't change the affinity of the timer IRQ. This
1675 * is due to the constraint in the voyager
1676 * architecture that the CPI also comes in on and IRQ
1677 * line and we have chosen IRQ0 for this. If you
1678 * raise the mask on this interrupt, the processor
1679 * will no-longer be able to accept VIC CPIs */
1683 /* You can only have 32 interrupts in a voyager system
1684 * (and 32 only if you have a secondary microchannel
1688 for_each_online_cpu(cpu
) {
1689 unsigned long cpu_mask
= 1 << cpu
;
1691 if (cpu_mask
& real_mask
) {
1692 /* enable the interrupt for this cpu */
1693 cpu_irq_affinity
[cpu
] |= irq_mask
;
1695 /* disable the interrupt for this cpu */
1696 cpu_irq_affinity
[cpu
] &= ~irq_mask
;
1699 /* this is magic, we now have the correct affinity maps, so
1700 * enable the interrupt. This will send an enable CPI to
1701 * those CPUs who need to enable it in their local masks,
1702 * causing them to correct for the new affinity . If the
1703 * interrupt is currently globally disabled, it will simply be
1704 * disabled again as it comes in (voyager lazy disable). If
1705 * the affinity map is tightened to disable the interrupt on a
1706 * cpu, it will be pushed off when it comes in */
1707 unmask_vic_irq(irq
);
1710 static void ack_vic_irq(unsigned int irq
)
1713 outb(0x62, 0x20); /* Specific EOI to cascade */
1714 outb(0x60 | (irq
& 7), 0xA0);
1716 outb(0x60 | (irq
& 7), 0x20);
1720 /* enable the CPIs. In the VIC, the CPIs are delivered by the 8259
1721 * but are not vectored by it. This means that the 8259 mask must be
1722 * lowered to receive them */
1723 static __init
void vic_enable_cpi(void)
1725 __u8 cpu
= smp_processor_id();
1727 /* just take a copy of the current mask (nop for boot cpu) */
1728 vic_irq_mask
[cpu
] = vic_irq_mask
[boot_cpu_id
];
1730 enable_local_vic_irq(VIC_CPI_LEVEL0
);
1731 enable_local_vic_irq(VIC_CPI_LEVEL1
);
1732 /* for sys int and cmn int */
1733 enable_local_vic_irq(7);
1735 if (is_cpu_quad()) {
1736 outb(QIC_DEFAULT_MASK0
, QIC_MASK_REGISTER0
);
1737 outb(QIC_CPI_ENABLE
, QIC_MASK_REGISTER1
);
1738 VDEBUG(("VOYAGER SMP: QIC ENABLE CPI: CPU%d: MASK 0x%x\n",
1739 cpu
, QIC_CPI_ENABLE
));
1742 VDEBUG(("VOYAGER SMP: ENABLE CPI: CPU%d: MASK 0x%x\n",
1743 cpu
, vic_irq_mask
[cpu
]));
1746 void voyager_smp_dump()
1748 int old_cpu
= smp_processor_id(), cpu
;
1750 /* dump the interrupt masks of each processor */
1751 for_each_online_cpu(cpu
) {
1752 __u16 imr
, isr
, irr
;
1753 unsigned long flags
;
1755 local_irq_save(flags
);
1756 outb(VIC_CPU_MASQUERADE_ENABLE
| cpu
, VIC_PROCESSOR_ID
);
1757 imr
= (inb(0xa1) << 8) | inb(0x21);
1759 irr
= inb(0xa0) << 8;
1763 isr
= inb(0xa0) << 8;
1766 outb(old_cpu
, VIC_PROCESSOR_ID
);
1767 local_irq_restore(flags
);
1768 printk("\tCPU%d: mask=0x%x, IMR=0x%x, IRR=0x%x, ISR=0x%x\n",
1769 cpu
, vic_irq_mask
[cpu
], imr
, irr
, isr
);
1771 /* These lines are put in to try to unstick an un ack'd irq */
1774 for (irq
= 0; irq
< 16; irq
++) {
1775 if (isr
& (1 << irq
)) {
1776 printk("\tCPU%d: ack irq %d\n",
1778 local_irq_save(flags
);
1779 outb(VIC_CPU_MASQUERADE_ENABLE
| cpu
,
1782 outb(old_cpu
, VIC_PROCESSOR_ID
);
1783 local_irq_restore(flags
);
1791 void smp_voyager_power_off(void *dummy
)
1793 if (smp_processor_id() == boot_cpu_id
)
1794 voyager_power_off();
1796 smp_stop_cpu_function(NULL
);
1799 static void __init
voyager_smp_prepare_cpus(unsigned int max_cpus
)
1801 /* FIXME: ignore max_cpus for now */
1805 static void __cpuinit
voyager_smp_prepare_boot_cpu(void)
1807 init_gdt(smp_processor_id());
1808 switch_to_new_gdt();
1810 cpu_set(smp_processor_id(), cpu_online_map
);
1811 cpu_set(smp_processor_id(), cpu_callout_map
);
1812 cpu_set(smp_processor_id(), cpu_possible_map
);
1813 cpu_set(smp_processor_id(), cpu_present_map
);
1816 static int __cpuinit
voyager_cpu_up(unsigned int cpu
)
1818 /* This only works at boot for x86. See "rewrite" above. */
1819 if (cpu_isset(cpu
, smp_commenced_mask
))
1822 /* In case one didn't come up */
1823 if (!cpu_isset(cpu
, cpu_callin_map
))
1825 /* Unleash the CPU! */
1826 cpu_set(cpu
, smp_commenced_mask
);
1827 while (!cpu_online(cpu
))
1832 static void __init
voyager_smp_cpus_done(unsigned int max_cpus
)
1837 void __init
smp_setup_processor_id(void)
1839 current_thread_info()->cpu
= hard_smp_processor_id();
1840 x86_write_percpu(cpu_number
, hard_smp_processor_id());
1843 struct smp_ops smp_ops
= {
1844 .smp_prepare_boot_cpu
= voyager_smp_prepare_boot_cpu
,
1845 .smp_prepare_cpus
= voyager_smp_prepare_cpus
,
1846 .cpu_up
= voyager_cpu_up
,
1847 .smp_cpus_done
= voyager_smp_cpus_done
,
1849 .smp_send_stop
= voyager_smp_send_stop
,
1850 .smp_send_reschedule
= voyager_smp_send_reschedule
,
1851 .smp_call_function_mask
= voyager_smp_call_function_mask
,