arch/x86/pci/common.c

   1 /*
   2  *      Low-Level PCI Support for PC
   3  *
   4  *      (c) 1999--2000 Martin Mares <mj@ucw.cz>
   5  */
   6
   7 #include <linux/sched.h>
   8 #include <linux/pci.h>
   9 #include <linux/pci-acpi.h>
  10 #include <linux/ioport.h>
  11 #include <linux/init.h>
  12 #include <linux/dmi.h>
  13 #include <linux/slab.h>
  14
  15 #include <asm-generic/pci-bridge.h>
  16 #include <asm/acpi.h>
  17 #include <asm/segment.h>
  18 #include <asm/io.h>
  19 #include <asm/smp.h>
  20 #include <asm/pci_x86.h>
  21 #include <asm/setup.h>
  22
  23 unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
  24                                 PCI_PROBE_MMCONF;
  25
  26 unsigned int pci_early_dump_regs;
  27 static int pci_bf_sort;
  28 static int smbios_type_b1_flag;
  29 int pci_routeirq;
  30 int noioapicquirk;
  31 #ifdef CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS
  32 int noioapicreroute = 0;
  33 #else
  34 int noioapicreroute = 1;
  35 #endif
  36 int pcibios_last_bus = -1;
  37 unsigned long pirq_table_addr;
  38 const struct pci_raw_ops *__read_mostly raw_pci_ops;
  39 const struct pci_raw_ops *__read_mostly raw_pci_ext_ops;
  40
  41 int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
  42                                                 int reg, int len, u32 *val)
  43 {
  44         if (domain == 0 && reg < 256 && raw_pci_ops)
  45                 return raw_pci_ops->read(domain, bus, devfn, reg, len, val);
  46         if (raw_pci_ext_ops)
  47                 return raw_pci_ext_ops->read(domain, bus, devfn, reg, len, val);
  48         return -EINVAL;
  49 }
  50
  51 int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
  52                                                 int reg, int len, u32 val)
  53 {
  54         if (domain == 0 && reg < 256 && raw_pci_ops)
  55                 return raw_pci_ops->write(domain, bus, devfn, reg, len, val);
  56         if (raw_pci_ext_ops)
  57                 return raw_pci_ext_ops->write(domain, bus, devfn, reg, len, val);
  58         return -EINVAL;
  59 }
  60
  61 static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
  62 {
  63         return raw_pci_read(pci_domain_nr(bus), bus->number,
  64                                  devfn, where, size, value);
  65 }
  66
  67 static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
  68 {
  69         return raw_pci_write(pci_domain_nr(bus), bus->number,
  70                                   devfn, where, size, value);
  71 }
  72
  73 struct pci_ops pci_root_ops = {
  74         .read = pci_read,
  75         .write = pci_write,
  76 };
  77
  78 /*
  79  * This interrupt-safe spinlock protects all accesses to PCI
  80  * configuration space.
  81  */
  82 DEFINE_RAW_SPINLOCK(pci_config_lock);
  83
  84 static int __init can_skip_ioresource_align(const struct dmi_system_id *d)
  85 {
  86         pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
  87         printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident);
  88         return 0;
  89 }
  90
  91 static const struct dmi_system_id can_skip_pciprobe_dmi_table[] __initconst = {
  92 /*
  93  * Systems where PCI IO resource ISA alignment can be skipped
  94  * when the ISA enable bit in the bridge control is not set
  95  */
  96         {
  97                 .callback = can_skip_ioresource_align,
  98                 .ident = "IBM System x3800",
  99                 .matches = {
 100                         DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
 101                         DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
 102                 },
 103         },
 104         {
 105                 .callback = can_skip_ioresource_align,
 106                 .ident = "IBM System x3850",
 107                 .matches = {
 108                         DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
 109                         DMI_MATCH(DMI_PRODUCT_NAME, "x3850"),
 110                 },
 111         },
 112         {
 113                 .callback = can_skip_ioresource_align,
 114                 .ident = "IBM System x3950",
 115                 .matches = {
 116                         DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
 117                         DMI_MATCH(DMI_PRODUCT_NAME, "x3950"),
 118                 },
 119         },
 120         {}
 121 };
 122
 123 void __init dmi_check_skip_isa_align(void)
 124 {
 125         dmi_check_system(can_skip_pciprobe_dmi_table);
 126 }
 127
 128 static void pcibios_fixup_device_resources(struct pci_dev *dev)
 129 {
 130         struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE];
 131         struct resource *bar_r;
 132         int bar;
 133
 134         if (pci_probe & PCI_NOASSIGN_BARS) {
 135                 /*
 136                 * If the BIOS did not assign the BAR, zero out the
 137                 * resource so the kernel doesn't attmept to assign
 138                 * it later on in pci_assign_unassigned_resources
 139                 */
 140                 for (bar = 0; bar <= PCI_STD_RESOURCE_END; bar++) {
 141                         bar_r = &dev->resource[bar];
 142                         if (bar_r->start == 0 && bar_r->end != 0) {
 143                                 bar_r->flags = 0;
 144                                 bar_r->end = 0;
 145                         }
 146                 }
 147         }
 148
 149         if (pci_probe & PCI_NOASSIGN_ROMS) {
 150                 if (rom_r->parent)
 151                         return;
 152                 if (rom_r->start) {
 153                         /* we deal with BIOS assigned ROM later */
 154                         return;
 155                 }
 156                 rom_r->start = rom_r->end = rom_r->flags = 0;
 157         }
 158 }
 159
 160 /*
 161  *  Called after each bus is probed, but before its children
 162  *  are examined.
 163  */
 164
 165 void pcibios_fixup_bus(struct pci_bus *b)
 166 {
 167         struct pci_dev *dev;
 168
 169         pci_read_bridge_bases(b);
 170         list_for_each_entry(dev, &b->devices, bus_list)
 171                 pcibios_fixup_device_resources(dev);
 172 }
 173
 174 void pcibios_add_bus(struct pci_bus *bus)
 175 {
 176         acpi_pci_add_bus(bus);
 177 }
 178
 179 void pcibios_remove_bus(struct pci_bus *bus)
 180 {
 181         acpi_pci_remove_bus(bus);
 182 }
 183
 184 /*
 185  * Only use DMI information to set this if nothing was passed
 186  * on the kernel command line (which was parsed earlier).
 187  */
 188
 189 static int __init set_bf_sort(const struct dmi_system_id *d)
 190 {
 191         if (pci_bf_sort == pci_bf_sort_default) {
 192                 pci_bf_sort = pci_dmi_bf;
 193                 printk(KERN_INFO "PCI: %s detected, enabling pci=bfsort.\n", d->ident);
 194         }
 195         return 0;
 196 }
 197
 198 static void __init read_dmi_type_b1(const struct dmi_header *dm,
 199                                     void *private_data)
 200 {
 201         u8 *d = (u8 *)dm + 4;
 202
 203         if (dm->type != 0xB1)
 204                 return;
 205         switch (((*(u32 *)d) >> 9) & 0x03) {
 206         case 0x00:
 207                 printk(KERN_INFO "dmi type 0xB1 record - unknown flag\n");
 208                 break;
 209         case 0x01: /* set pci=bfsort */
 210                 smbios_type_b1_flag = 1;
 211                 break;
 212         case 0x02: /* do not set pci=bfsort */
 213                 smbios_type_b1_flag = 2;
 214                 break;
 215         default:
 216                 break;
 217         }
 218 }
 219
 220 static int __init find_sort_method(const struct dmi_system_id *d)
 221 {
 222         dmi_walk(read_dmi_type_b1, NULL);
 223
 224         if (smbios_type_b1_flag == 1) {
 225                 set_bf_sort(d);
 226                 return 0;
 227         }
 228         return -1;
 229 }
 230
 231 /*
 232  * Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus)
 233  */
 234 #ifdef __i386__
 235 static int __init assign_all_busses(const struct dmi_system_id *d)
 236 {
 237         pci_probe |= PCI_ASSIGN_ALL_BUSSES;
 238         printk(KERN_INFO "%s detected: enabling PCI bus# renumbering"
 239                         " (pci=assign-busses)\n", d->ident);
 240         return 0;
 241 }
 242 #endif
 243
 244 static int __init set_scan_all(const struct dmi_system_id *d)
 245 {
 246         printk(KERN_INFO "PCI: %s detected, enabling pci=pcie_scan_all\n",
 247                d->ident);
 248         pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS);
 249         return 0;
 250 }
 251
 252 static const struct dmi_system_id pciprobe_dmi_table[] __initconst = {
 253 #ifdef __i386__
 254 /*
 255  * Laptops which need pci=assign-busses to see Cardbus cards
 256  */
 257         {
 258                 .callback = assign_all_busses,
 259                 .ident = "Samsung X20 Laptop",
 260                 .matches = {
 261                         DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"),
 262                         DMI_MATCH(DMI_PRODUCT_NAME, "SX20S"),
 263                 },
 264         },
 265 #endif          /* __i386__ */
 266         {
 267                 .callback = set_bf_sort,
 268                 .ident = "Dell PowerEdge 1950",
 269                 .matches = {
 270                         DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
 271                         DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"),
 272                 },
 273         },
 274         {
 275                 .callback = set_bf_sort,
 276                 .ident = "Dell PowerEdge 1955",
 277                 .matches = {
 278                         DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
 279                         DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1955"),
 280                 },
 281         },
 282         {
 283                 .callback = set_bf_sort,
 284                 .ident = "Dell PowerEdge 2900",
 285                 .matches = {
 286                         DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
 287                         DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2900"),
 288                 },
 289         },
 290         {
 291                 .callback = set_bf_sort,
 292                 .ident = "Dell PowerEdge 2950",
 293                 .matches = {
 294                         DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
 295                         DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"),
 296                 },
 297         },
 298         {
 299                 .callback = set_bf_sort,
 300                 .ident = "Dell PowerEdge R900",
 301                 .matches = {
 302                         DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
 303                         DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R900"),
 304                 },
 305         },
 306         {
 307                 .callback = find_sort_method,
 308                 .ident = "Dell System",
 309                 .matches = {
 310                         DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
 311                 },
 312         },
 313         {
 314                 .callback = set_bf_sort,
 315                 .ident = "HP ProLiant BL20p G3",
 316                 .matches = {
 317                         DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 318                         DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G3"),
 319                 },
 320         },
 321         {
 322                 .callback = set_bf_sort,
 323                 .ident = "HP ProLiant BL20p G4",
 324                 .matches = {
 325                         DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 326                         DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G4"),
 327                 },
 328         },
 329         {
 330                 .callback = set_bf_sort,
 331                 .ident = "HP ProLiant BL30p G1",
 332                 .matches = {
 333                         DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 334                         DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL30p G1"),
 335                 },
 336         },
 337         {
 338                 .callback = set_bf_sort,
 339                 .ident = "HP ProLiant BL25p G1",
 340                 .matches = {
 341                         DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 342                         DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL25p G1"),
 343                 },
 344         },
 345         {
 346                 .callback = set_bf_sort,
 347                 .ident = "HP ProLiant BL35p G1",
 348                 .matches = {
 349                         DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 350                         DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL35p G1"),
 351                 },
 352         },
 353         {
 354                 .callback = set_bf_sort,
 355                 .ident = "HP ProLiant BL45p G1",
 356                 .matches = {
 357                         DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 358                         DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G1"),
 359                 },
 360         },
 361         {
 362                 .callback = set_bf_sort,
 363                 .ident = "HP ProLiant BL45p G2",
 364                 .matches = {
 365                         DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 366                         DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G2"),
 367                 },
 368         },
 369         {
 370                 .callback = set_bf_sort,
 371                 .ident = "HP ProLiant BL460c G1",
 372                 .matches = {
 373                         DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 374                         DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL460c G1"),
 375                 },
 376         },
 377         {
 378                 .callback = set_bf_sort,
 379                 .ident = "HP ProLiant BL465c G1",
 380                 .matches = {
 381                         DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 382                         DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL465c G1"),
 383                 },
 384         },
 385         {
 386                 .callback = set_bf_sort,
 387                 .ident = "HP ProLiant BL480c G1",
 388                 .matches = {
 389                         DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 390                         DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL480c G1"),
 391                 },
 392         },
 393         {
 394                 .callback = set_bf_sort,
 395                 .ident = "HP ProLiant BL685c G1",
 396                 .matches = {
 397                         DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 398                         DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL685c G1"),
 399                 },
 400         },
 401         {
 402                 .callback = set_bf_sort,
 403                 .ident = "HP ProLiant DL360",
 404                 .matches = {
 405                         DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 406                         DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"),
 407                 },
 408         },
 409         {
 410                 .callback = set_bf_sort,
 411                 .ident = "HP ProLiant DL380",
 412                 .matches = {
 413                         DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 414                         DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"),
 415                 },
 416         },
 417 #ifdef __i386__
 418         {
 419                 .callback = assign_all_busses,
 420                 .ident = "Compaq EVO N800c",
 421                 .matches = {
 422                         DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
 423                         DMI_MATCH(DMI_PRODUCT_NAME, "EVO N800c"),
 424                 },
 425         },
 426 #endif
 427         {
 428                 .callback = set_bf_sort,
 429                 .ident = "HP ProLiant DL385 G2",
 430                 .matches = {
 431                         DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 432                         DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
 433                 },
 434         },
 435         {
 436                 .callback = set_bf_sort,
 437                 .ident = "HP ProLiant DL585 G2",
 438                 .matches = {
 439                         DMI_MATCH(DMI_SYS_VENDOR, "HP"),
 440                         DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
 441                 },
 442         },
 443         {
 444                 .callback = set_scan_all,
 445                 .ident = "Stratus/NEC ftServer",
 446                 .matches = {
 447                         DMI_MATCH(DMI_SYS_VENDOR, "Stratus"),
 448                         DMI_MATCH(DMI_PRODUCT_NAME, "ftServer"),
 449                 },
 450         },
 451         {
 452                 .callback = set_scan_all,
 453                 .ident = "Stratus/NEC ftServer",
 454                 .matches = {
 455                         DMI_MATCH(DMI_SYS_VENDOR, "NEC"),
 456                         DMI_MATCH(DMI_PRODUCT_NAME, "Express5800/R32"),
 457                 },
 458         },
 459         {
 460                 .callback = set_scan_all,
 461                 .ident = "Stratus/NEC ftServer",
 462                 .matches = {
 463                         DMI_MATCH(DMI_SYS_VENDOR, "NEC"),
 464                         DMI_MATCH(DMI_PRODUCT_NAME, "Express5800/R31"),
 465                 },
 466         },
 467         {}
 468 };
 469
 470 void __init dmi_check_pciprobe(void)
 471 {
 472         dmi_check_system(pciprobe_dmi_table);
 473 }
 474
 475 void pcibios_scan_root(int busnum)
 476 {
 477         struct pci_bus *bus;
 478         struct pci_sysdata *sd;
 479         LIST_HEAD(resources);
 480
 481         sd = kzalloc(sizeof(*sd), GFP_KERNEL);
 482         if (!sd) {
 483                 printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busnum);
 484                 return;
 485         }
 486         sd->node = x86_pci_root_bus_node(busnum);
 487         x86_pci_root_bus_resources(busnum, &resources);
 488         printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum);
 489         bus = pci_scan_root_bus(NULL, busnum, &pci_root_ops, sd, &resources);
 490         if (!bus) {
 491                 pci_free_resource_list(&resources);
 492                 kfree(sd);
 493         }
 494 }
 495
 496 void __init pcibios_set_cache_line_size(void)
 497 {
 498         struct cpuinfo_x86 *c = &boot_cpu_data;
 499
 500         /*
 501          * Set PCI cacheline size to that of the CPU if the CPU has reported it.
 502          * (For older CPUs that don't support cpuid, we se it to 32 bytes
 503          * It's also good for 386/486s (which actually have 16)
 504          * as quite a few PCI devices do not support smaller values.
 505          */
 506         if (c->x86_clflush_size > 0) {
 507                 pci_dfl_cache_line_size = c->x86_clflush_size >> 2;
 508                 printk(KERN_DEBUG "PCI: pci_cache_line_size set to %d bytes\n",
 509                         pci_dfl_cache_line_size << 2);
 510         } else {
 511                 pci_dfl_cache_line_size = 32 >> 2;
 512                 printk(KERN_DEBUG "PCI: Unknown cacheline size. Setting to 32 bytes\n");
 513         }
 514 }
 515
 516 /*
 517  * Some device drivers assume dev->irq won't change after calling
 518  * pci_disable_device(). So delay releasing of IRQ resource to driver
 519  * unbinding time. Otherwise it will break PM subsystem and drivers
 520  * like xen-pciback etc.
 521  */
 522 static int pci_irq_notifier(struct notifier_block *nb, unsigned long action,
 523                             void *data)
 524 {
 525         struct pci_dev *dev = to_pci_dev(data);
 526
 527         if (action != BUS_NOTIFY_UNBOUND_DRIVER)
 528                 return NOTIFY_DONE;
 529
 530         if (pcibios_disable_irq)
 531                 pcibios_disable_irq(dev);
 532
 533         return NOTIFY_OK;
 534 }
 535
 536 static struct notifier_block pci_irq_nb = {
 537         .notifier_call = pci_irq_notifier,
 538         .priority = INT_MIN,
 539 };
 540
 541 int __init pcibios_init(void)
 542 {
 543         if (!raw_pci_ops) {
 544                 printk(KERN_WARNING "PCI: System does not support PCI\n");
 545                 return 0;
 546         }
 547
 548         pcibios_set_cache_line_size();
 549         pcibios_resource_survey();
 550
 551         if (pci_bf_sort >= pci_force_bf)
 552                 pci_sort_breadthfirst();
 553
 554         bus_register_notifier(&pci_bus_type, &pci_irq_nb);
 555
 556         return 0;
 557 }
 558
 559 char *__init pcibios_setup(char *str)
 560 {
 561         if (!strcmp(str, "off")) {
 562                 pci_probe = 0;
 563                 return NULL;
 564         } else if (!strcmp(str, "bfsort")) {
 565                 pci_bf_sort = pci_force_bf;
 566                 return NULL;
 567         } else if (!strcmp(str, "nobfsort")) {
 568                 pci_bf_sort = pci_force_nobf;
 569                 return NULL;
 570         }
 571 #ifdef CONFIG_PCI_BIOS
 572         else if (!strcmp(str, "bios")) {
 573                 pci_probe = PCI_PROBE_BIOS;
 574                 return NULL;
 575         } else if (!strcmp(str, "nobios")) {
 576                 pci_probe &= ~PCI_PROBE_BIOS;
 577                 return NULL;
 578         } else if (!strcmp(str, "biosirq")) {
 579                 pci_probe |= PCI_BIOS_IRQ_SCAN;
 580                 return NULL;
 581         } else if (!strncmp(str, "pirqaddr=", 9)) {
 582                 pirq_table_addr = simple_strtoul(str+9, NULL, 0);
 583                 return NULL;
 584         }
 585 #endif
 586 #ifdef CONFIG_PCI_DIRECT
 587         else if (!strcmp(str, "conf1")) {
 588                 pci_probe = PCI_PROBE_CONF1 | PCI_NO_CHECKS;
 589                 return NULL;
 590         }
 591         else if (!strcmp(str, "conf2")) {
 592                 pci_probe = PCI_PROBE_CONF2 | PCI_NO_CHECKS;
 593                 return NULL;
 594         }
 595 #endif
 596 #ifdef CONFIG_PCI_MMCONFIG
 597         else if (!strcmp(str, "nommconf")) {
 598                 pci_probe &= ~PCI_PROBE_MMCONF;
 599                 return NULL;
 600         }
 601         else if (!strcmp(str, "check_enable_amd_mmconf")) {
 602                 pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF;
 603                 return NULL;
 604         }
 605 #endif
 606         else if (!strcmp(str, "noacpi")) {
 607                 acpi_noirq_set();
 608                 return NULL;
 609         }
 610         else if (!strcmp(str, "noearly")) {
 611                 pci_probe |= PCI_PROBE_NOEARLY;
 612                 return NULL;
 613         }
 614         else if (!strcmp(str, "usepirqmask")) {
 615                 pci_probe |= PCI_USE_PIRQ_MASK;
 616                 return NULL;
 617         } else if (!strncmp(str, "irqmask=", 8)) {
 618                 pcibios_irq_mask = simple_strtol(str+8, NULL, 0);
 619                 return NULL;
 620         } else if (!strncmp(str, "lastbus=", 8)) {
 621                 pcibios_last_bus = simple_strtol(str+8, NULL, 0);
 622                 return NULL;
 623         } else if (!strcmp(str, "rom")) {
 624                 pci_probe |= PCI_ASSIGN_ROMS;
 625                 return NULL;
 626         } else if (!strcmp(str, "norom")) {
 627                 pci_probe |= PCI_NOASSIGN_ROMS;
 628                 return NULL;
 629         } else if (!strcmp(str, "nobar")) {
 630                 pci_probe |= PCI_NOASSIGN_BARS;
 631                 return NULL;
 632         } else if (!strcmp(str, "assign-busses")) {
 633                 pci_probe |= PCI_ASSIGN_ALL_BUSSES;
 634                 return NULL;
 635         } else if (!strcmp(str, "use_crs")) {
 636                 pci_probe |= PCI_USE__CRS;
 637                 return NULL;
 638         } else if (!strcmp(str, "nocrs")) {
 639                 pci_probe |= PCI_ROOT_NO_CRS;
 640                 return NULL;
 641         } else if (!strcmp(str, "earlydump")) {
 642                 pci_early_dump_regs = 1;
 643                 return NULL;
 644         } else if (!strcmp(str, "routeirq")) {
 645                 pci_routeirq = 1;
 646                 return NULL;
 647         } else if (!strcmp(str, "skip_isa_align")) {
 648                 pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
 649                 return NULL;
 650         } else if (!strcmp(str, "noioapicquirk")) {
 651                 noioapicquirk = 1;
 652                 return NULL;
 653         } else if (!strcmp(str, "ioapicreroute")) {
 654                 if (noioapicreroute != -1)
 655                         noioapicreroute = 0;
 656                 return NULL;
 657         } else if (!strcmp(str, "noioapicreroute")) {
 658                 if (noioapicreroute != -1)
 659                         noioapicreroute = 1;
 660                 return NULL;
 661         }
 662         return str;
 663 }
 664
 665 unsigned int pcibios_assign_all_busses(void)
 666 {
 667         return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
 668 }
 669
 670 int pcibios_add_device(struct pci_dev *dev)
 671 {
 672         struct setup_data *data;
 673         struct pci_setup_rom *rom;
 674         u64 pa_data;
 675
 676         pa_data = boot_params.hdr.setup_data;
 677         while (pa_data) {
 678                 data = ioremap(pa_data, sizeof(*rom));
 679                 if (!data)
 680                         return -ENOMEM;
 681
 682                 if (data->type == SETUP_PCI) {
 683                         rom = (struct pci_setup_rom *)data;
 684
 685                         if ((pci_domain_nr(dev->bus) == rom->segment) &&
 686                             (dev->bus->number == rom->bus) &&
 687                             (PCI_SLOT(dev->devfn) == rom->device) &&
 688                             (PCI_FUNC(dev->devfn) == rom->function) &&
 689                             (dev->vendor == rom->vendor) &&
 690                             (dev->device == rom->devid)) {
 691                                 dev->rom = pa_data +
 692                                       offsetof(struct pci_setup_rom, romdata);
 693                                 dev->romlen = rom->pcilen;
 694                         }
 695                 }
 696                 pa_data = data->next;
 697                 iounmap(data);
 698         }
 699         return 0;
 700 }
 701
 702 int pcibios_enable_device(struct pci_dev *dev, int mask)
 703 {
 704         int err;
 705
 706         if ((err = pci_enable_resources(dev, mask)) < 0)
 707                 return err;
 708
 709         if (!pci_dev_msi_enabled(dev))
 710                 return pcibios_enable_irq(dev);
 711         return 0;
 712 }
 713
 714 int pci_ext_cfg_avail(void)
 715 {
 716         if (raw_pci_ext_ops)
 717                 return 1;
 718         else
 719                 return 0;
 720 }