arch/x86/pci/pci.h

   1 /*
   2  *      Low-Level PCI Access for i386 machines.
   3  *
   4  *      (c) 1999 Martin Mares <mj@ucw.cz>
   5  */
   6
   7 #undef DEBUG
   8
   9 #ifdef DEBUG
  10 #define DBG(x...) printk(x)
  11 #else
  12 #define DBG(x...)
  13 #endif
  14
  15 #define PCI_PROBE_BIOS          0x0001
  16 #define PCI_PROBE_CONF1         0x0002
  17 #define PCI_PROBE_CONF2         0x0004
  18 #define PCI_PROBE_MMCONF        0x0008
  19 #define PCI_PROBE_MASK          0x000f
  20 #define PCI_PROBE_NOEARLY       0x0010
  21
  22 #define PCI_NO_CHECKS           0x0400
  23 #define PCI_USE_PIRQ_MASK       0x0800
  24 #define PCI_ASSIGN_ROMS         0x1000
  25 #define PCI_BIOS_IRQ_SCAN       0x2000
  26 #define PCI_ASSIGN_ALL_BUSSES   0x4000
  27 #define PCI_CAN_SKIP_ISA_ALIGN  0x8000
  28 #define PCI_USE__CRS            0x10000
  29 #define PCI_CHECK_ENABLE_AMD_MMCONF     0x20000
  30 #define PCI_NOASSIGN_ROMS       0x40000
  31
  32 extern unsigned int pci_probe;
  33 extern unsigned long pirq_table_addr;
  34
  35 enum pci_bf_sort_state {
  36         pci_bf_sort_default,
  37         pci_force_nobf,
  38         pci_force_bf,
  39         pci_dmi_bf,
  40 };
  41
  42 extern void __init dmi_check_pciprobe(void);
  43 extern void __init dmi_check_skip_isa_align(void);
  44
  45 /* pci-i386.c */
  46
  47 extern unsigned int pcibios_max_latency;
  48
  49 void pcibios_resource_survey(void);
  50
  51 /* pci-pc.c */
  52
  53 extern int pcibios_last_bus;
  54 extern struct pci_bus *pci_root_bus;
  55 extern struct pci_ops pci_root_ops;
  56
  57 /* pci-irq.c */
  58
  59 struct irq_info {
  60         u8 bus, devfn;                  /* Bus, device and function */
  61         struct {
  62                 u8 link;                /* IRQ line ID, chipset dependent, 0=not routed */
  63                 u16 bitmap;             /* Available IRQs */
  64         } __attribute__((packed)) irq[4];
  65         u8 slot;                        /* Slot number, 0=onboard */
  66         u8 rfu;
  67 } __attribute__((packed));
  68
  69 struct irq_routing_table {
  70         u32 signature;                  /* PIRQ_SIGNATURE should be here */
  71         u16 version;                    /* PIRQ_VERSION */
  72         u16 size;                       /* Table size in bytes */
  73         u8 rtr_bus, rtr_devfn;          /* Where the interrupt router lies */
  74         u16 exclusive_irqs;             /* IRQs devoted exclusively to PCI usage */
  75         u16 rtr_vendor, rtr_device;     /* Vendor and device ID of interrupt router */
  76         u32 miniport_data;              /* Crap */
  77         u8 rfu[11];
  78         u8 checksum;                    /* Modulo 256 checksum must give zero */
  79         struct irq_info slots[0];
  80 } __attribute__((packed));
  81
  82 extern unsigned int pcibios_irq_mask;
  83
  84 extern int pcibios_scanned;
  85 extern spinlock_t pci_config_lock;
  86
  87 extern int (*pcibios_enable_irq)(struct pci_dev *dev);
  88 extern void (*pcibios_disable_irq)(struct pci_dev *dev);
  89
  90 struct pci_raw_ops {
  91         int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn,
  92                                                 int reg, int len, u32 *val);
  93         int (*write)(unsigned int domain, unsigned int bus, unsigned int devfn,
  94                                                 int reg, int len, u32 val);
  95 };
  96
  97 extern struct pci_raw_ops *raw_pci_ops;
  98 extern struct pci_raw_ops *raw_pci_ext_ops;
  99
 100 extern struct pci_raw_ops pci_direct_conf1;
 101
 102 extern int pci_direct_probe(void);
 103 extern void pci_direct_init(int type);
 104 extern void pci_pcbios_init(void);
 105 extern int pci_olpc_init(void);
 106
 107 /* pci-mmconfig.c */
 108
 109 extern int __init pci_mmcfg_arch_init(void);
 110 extern void __init pci_mmcfg_arch_free(void);
 111
 112 /*
 113  * AMD Fam10h CPUs are buggy, and cannot access MMIO config space
 114  * on their northbrige except through the * %eax register. As such, you MUST
 115  * NOT use normal IOMEM accesses, you need to only use the magic mmio-config
 116  * accessor functions.
 117  * In fact just use pci_config_*, nothing else please.
 118  */
 119 static inline unsigned char mmio_config_readb(void __iomem *pos)
 120 {
 121         u8 val;
 122         asm volatile("movb (%1),%%al" : "=a" (val) : "r" (pos));
 123         return val;
 124 }
 125
 126 static inline unsigned short mmio_config_readw(void __iomem *pos)
 127 {
 128         u16 val;
 129         asm volatile("movw (%1),%%ax" : "=a" (val) : "r" (pos));
 130         return val;
 131 }
 132
 133 static inline unsigned int mmio_config_readl(void __iomem *pos)
 134 {
 135         u32 val;
 136         asm volatile("movl (%1),%%eax" : "=a" (val) : "r" (pos));
 137         return val;
 138 }
 139
 140 static inline void mmio_config_writeb(void __iomem *pos, u8 val)
 141 {
 142         asm volatile("movb %%al,(%1)" :: "a" (val), "r" (pos) : "memory");
 143 }
 144
 145 static inline void mmio_config_writew(void __iomem *pos, u16 val)
 146 {
 147         asm volatile("movw %%ax,(%1)" :: "a" (val), "r" (pos) : "memory");
 148 }
 149
 150 static inline void mmio_config_writel(void __iomem *pos, u32 val)
 151 {
 152         asm volatile("movl %%eax,(%1)" :: "a" (val), "r" (pos) : "memory");
 153 }