1 /* Main header file for the bfd library -- portable access to object files.
2 Copyright 1990, 91, 92, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
3 Contributed by Cygnus Support.
5 ** NOTE: bfd.h and bfd-in2.h are GENERATED files. Don't change them;
6 ** instead, change bfd-in.h or the other BFD source files processed to
7 ** generate these files.
9 This file is part of BFD, the Binary File Descriptor library.
11 This program is free software; you can redistribute it and/or modify
12 it under the terms of the GNU General Public License as published by
13 the Free Software Foundation; either version 2 of the License, or
14 (at your option) any later version.
16 This program is distributed in the hope that it will be useful,
17 but WITHOUT ANY WARRANTY; without even the implied warranty of
18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 GNU General Public License for more details.
21 You should have received a copy of the GNU General Public License
22 along with this program; if not, write to the Free Software
23 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
25 /* bfd.h -- The only header file required by users of the bfd library
27 The bfd.h file is generated from bfd-in.h and various .c files; if you
28 change it, your changes will probably be lost.
30 All the prototypes and definitions following the comment "THE FOLLOWING
31 IS EXTRACTED FROM THE SOURCE" are extracted from the source files for
32 BFD. If you change it, someone oneday will extract it from the source
33 again, and your changes will be lost. To save yourself from this bind,
34 change the definitions in the source in the bfd directory. Type "make
35 docs" and then "make headers" in that directory, and magically this file
36 will change to reflect your changes.
38 If you don't have the tools to perform the extraction, then you are
39 safe from someone on your system trampling over your header files.
40 You should still maintain the equivalence between the source and this
41 file though; every change you make to the .c file should be reflected
44 #ifndef __BFD_H_SEEN__
45 #define __BFD_H_SEEN__
53 /* These two lines get substitutions done by commands in Makefile.in. */
54 #define BFD_VERSION "@VERSION@"
55 #define BFD_ARCH_SIZE @wordsize@
56 #define BFD_HOST_64BIT_LONG @BFD_HOST_64BIT_LONG@
57 #if @BFD_HOST_64_BIT_DEFINED@
58 #define BFD_HOST_64_BIT @BFD_HOST_64_BIT@
59 #define BFD_HOST_U_64_BIT @BFD_HOST_U_64_BIT@
62 #if BFD_ARCH_SIZE >= 64
68 #define INLINE __inline__
74 /* forward declaration */
75 typedef struct _bfd bfd
;
77 /* To squelch erroneous compiler warnings ("illegal pointer
78 combination") from the SVR3 compiler, we would like to typedef
79 boolean to int (it doesn't like functions which return boolean.
80 Making sure they are never implicitly declared to return int
81 doesn't seem to help). But this file is not configured based on
83 /* General rules: functions which are boolean return true on success
84 and false on failure (unless they're a predicate). -- bfd.doc */
85 /* I'm sure this is going to break something and someone is going to
86 force me to change it. */
87 /* typedef enum boolean {false, true} boolean; */
88 /* Yup, SVR4 has a "typedef enum boolean" in <sys/types.h> -fnf */
89 /* It gets worse if the host also defines a true/false enum... -sts */
90 /* And even worse if your compiler has built-in boolean types... -law */
91 #if defined (__GNUG__) && (__GNUC_MINOR__ > 5)
92 #define TRUE_FALSE_ALREADY_DEFINED
95 /* Pre-emptive strike - get the file with the enum. */
97 #define TRUE_FALSE_ALREADY_DEFINED
99 #ifndef TRUE_FALSE_ALREADY_DEFINED
100 typedef enum bfd_boolean
{false, true} boolean
;
101 #define BFD_TRUE_FALSE
103 /* Use enum names that will appear nowhere else. */
104 typedef enum bfd_boolean
{bfd_fffalse
, bfd_tttrue
} boolean
;
107 /* A pointer to a position in a file. */
108 /* FIXME: This should be using off_t from <sys/types.h>.
109 For now, try to avoid breaking stuff by not including <sys/types.h> here.
110 This will break on systems with 64-bit file offsets (e.g. 4.4BSD).
111 Probably the best long-term answer is to avoid using file_ptr AND off_t
112 in this header file, and to handle this in the BFD implementation
113 rather than in its interface. */
114 /* typedef off_t file_ptr; */
115 typedef long int file_ptr
;
117 /* Support for different sizes of target format ints and addresses.
118 If the type `long' is at least 64 bits, BFD_HOST_64BIT_LONG will be
119 set to 1 above. Otherwise, if gcc is being used, this code will
120 use gcc's "long long" type. Otherwise, BFD_HOST_64_BIT must be
125 #ifndef BFD_HOST_64_BIT
126 #if BFD_HOST_64BIT_LONG
127 #define BFD_HOST_64_BIT long
128 #define BFD_HOST_U_64_BIT unsigned long
131 #define BFD_HOST_64_BIT long long
132 #define BFD_HOST_U_64_BIT unsigned long long
133 #else /* ! defined (__GNUC__) */
134 #error No 64 bit integer type available
135 #endif /* ! defined (__GNUC__) */
136 #endif /* ! BFD_HOST_64BIT_LONG */
137 #endif /* ! defined (BFD_HOST_64_BIT) */
139 typedef BFD_HOST_U_64_BIT bfd_vma
;
140 typedef BFD_HOST_64_BIT bfd_signed_vma
;
141 typedef BFD_HOST_U_64_BIT bfd_size_type
;
142 typedef BFD_HOST_U_64_BIT symvalue
;
145 #if BFD_HOST_64BIT_LONG
146 #define sprintf_vma(s,x) sprintf (s, "%016lx", x)
147 #define fprintf_vma(f,x) fprintf (f, "%016lx", x)
149 #define _bfd_int64_low(x) ((unsigned long) (((x) & 0xffffffff)))
150 #define _bfd_int64_high(x) ((unsigned long) (((x) >> 32) & 0xffffffff))
151 #define fprintf_vma(s,x) \
152 fprintf ((s), "%08lx%08lx", _bfd_int64_high (x), _bfd_int64_low (x))
153 #define sprintf_vma(s,x) \
154 sprintf ((s), "%08lx%08lx", _bfd_int64_high (x), _bfd_int64_low (x))
158 #else /* not BFD64 */
160 /* Represent a target address. Also used as a generic unsigned type
161 which is guaranteed to be big enough to hold any arithmetic types
162 we need to deal with. */
163 typedef unsigned long bfd_vma
;
165 /* A generic signed type which is guaranteed to be big enough to hold any
166 arithmetic types we need to deal with. Can be assumed to be compatible
167 with bfd_vma in the same way that signed and unsigned ints are compatible
168 (as parameters, in assignment, etc). */
169 typedef long bfd_signed_vma
;
171 typedef unsigned long symvalue
;
172 typedef unsigned long bfd_size_type
;
174 /* Print a bfd_vma x on stream s. */
175 #define fprintf_vma(s,x) fprintf(s, "%08lx", x)
176 #define sprintf_vma(s,x) sprintf(s, "%08lx", x)
177 #endif /* not BFD64 */
178 #define printf_vma(x) fprintf_vma(stdout,x)
180 typedef unsigned int flagword
; /* 32 bits of flags */
181 typedef unsigned char bfd_byte
;
185 typedef enum bfd_format
{
186 bfd_unknown
= 0, /* file format is unknown */
187 bfd_object
, /* linker/assember/compiler output */
188 bfd_archive
, /* object archive file */
189 bfd_core
, /* core dump */
190 bfd_type_end
} /* marks the end; don't use it! */
193 /* Values that may appear in the flags field of a BFD. These also
194 appear in the object_flags field of the bfd_target structure, where
195 they indicate the set of flags used by that backend (not all flags
196 are meaningful for all object file formats) (FIXME: at the moment,
197 the object_flags values have mostly just been copied from backend
198 to another, and are not necessarily correct). */
201 #define BFD_NO_FLAGS 0x00
203 /* BFD contains relocation entries. */
204 #define HAS_RELOC 0x01
206 /* BFD is directly executable. */
209 /* BFD has line number information (basically used for F_LNNO in a
211 #define HAS_LINENO 0x04
213 /* BFD has debugging information. */
214 #define HAS_DEBUG 0x08
216 /* BFD has symbols. */
217 #define HAS_SYMS 0x10
219 /* BFD has local symbols (basically used for F_LSYMS in a COFF
221 #define HAS_LOCALS 0x20
223 /* BFD is a dynamic object. */
226 /* Text section is write protected (if D_PAGED is not set, this is
227 like an a.out NMAGIC file) (the linker sets this by default, but
228 clears it for -r or -N). */
231 /* BFD is dynamically paged (this is like an a.out ZMAGIC file) (the
232 linker sets this by default, but clears it for -r or -n or -N). */
233 #define D_PAGED 0x100
235 /* BFD is relaxable (this means that bfd_relax_section may be able to
236 do something) (sometimes bfd_relax_section can do something even if
238 #define BFD_IS_RELAXABLE 0x200
240 /* This may be set before writing out a BFD to request using a
241 traditional format. For example, this is used to request that when
242 writing out an a.out object the symbols not be hashed to eliminate
244 #define BFD_TRADITIONAL_FORMAT 0x400
246 /* This flag indicates that the BFD contents are actually cached in
247 memory. If this is set, iostream points to a bfd_in_memory struct. */
248 #define BFD_IN_MEMORY 0x800
250 /* symbols and relocation */
252 /* A count of carsyms (canonical archive symbols). */
253 typedef unsigned long symindex
;
255 /* How to perform a relocation. */
256 typedef const struct reloc_howto_struct reloc_howto_type
;
258 #define BFD_NO_MORE_SYMBOLS ((symindex) ~0)
260 /* General purpose part of a symbol X;
261 target specific parts are in libcoff.h, libaout.h, etc. */
263 #define bfd_get_section(x) ((x)->section)
264 #define bfd_get_output_section(x) ((x)->section->output_section)
265 #define bfd_set_section(x,y) ((x)->section) = (y)
266 #define bfd_asymbol_base(x) ((x)->section->vma)
267 #define bfd_asymbol_value(x) (bfd_asymbol_base(x) + (x)->value)
268 #define bfd_asymbol_name(x) ((x)->name)
269 /*Perhaps future: #define bfd_asymbol_bfd(x) ((x)->section->owner)*/
270 #define bfd_asymbol_bfd(x) ((x)->the_bfd)
271 #define bfd_asymbol_flavour(x) (bfd_asymbol_bfd(x)->xvec->flavour)
273 /* A canonical archive symbol. */
274 /* This is a type pun with struct ranlib on purpose! */
275 typedef struct carsym
{
277 file_ptr file_offset
; /* look here to find the file */
278 } carsym
; /* to make these you call a carsymogen */
281 /* Used in generating armaps (archive tables of contents).
282 Perhaps just a forward definition would do? */
283 struct orl
{ /* output ranlib */
284 char **name
; /* symbol name */
285 file_ptr pos
; /* bfd* or file position */
286 int namidx
; /* index into string table */
290 /* Linenumber stuff */
291 typedef struct lineno_cache_entry
{
292 unsigned int line_number
; /* Linenumber from start of function*/
294 struct symbol_cache_entry
*sym
; /* Function name */
295 unsigned long offset
; /* Offset into section */
299 /* object and core file sections */
301 #define align_power(addr, align) \
302 ( ((addr) + ((1<<(align))-1)) & (-1 << (align)))
304 typedef struct sec
*sec_ptr
;
306 #define bfd_get_section_name(bfd, ptr) ((ptr)->name + 0)
307 #define bfd_get_section_vma(bfd, ptr) ((ptr)->vma + 0)
308 #define bfd_get_section_alignment(bfd, ptr) ((ptr)->alignment_power + 0)
309 #define bfd_section_name(bfd, ptr) ((ptr)->name)
310 #define bfd_section_size(bfd, ptr) (bfd_get_section_size_before_reloc(ptr))
311 #define bfd_section_vma(bfd, ptr) ((ptr)->vma)
312 #define bfd_section_lma(bfd, ptr) ((ptr)->lma)
313 #define bfd_section_alignment(bfd, ptr) ((ptr)->alignment_power)
314 #define bfd_get_section_flags(bfd, ptr) ((ptr)->flags + 0)
315 #define bfd_get_section_userdata(bfd, ptr) ((ptr)->userdata)
317 #define bfd_is_com_section(ptr) (((ptr)->flags & SEC_IS_COMMON) != 0)
319 #define bfd_set_section_vma(bfd, ptr, val) (((ptr)->vma = (ptr)->lma= (val)), ((ptr)->user_set_vma = (boolean)true), true)
320 #define bfd_set_section_alignment(bfd, ptr, val) (((ptr)->alignment_power = (val)),true)
321 #define bfd_set_section_userdata(bfd, ptr, val) (((ptr)->userdata = (val)),true)
323 typedef struct stat stat_type
;
325 typedef enum bfd_print_symbol
327 bfd_print_symbol_name
,
328 bfd_print_symbol_more
,
330 } bfd_print_symbol_type
;
332 /* Information about a symbol that nm needs. */
334 typedef struct _symbol_info
338 CONST
char *name
; /* Symbol name. */
339 unsigned char stab_type
; /* Stab type. */
340 char stab_other
; /* Stab other. */
341 short stab_desc
; /* Stab desc. */
342 CONST
char *stab_name
; /* String for stab type. */
345 /* Get the name of a stabs type code. */
347 extern const char *bfd_get_stab_name
PARAMS ((int));
349 /* Hash table routines. There is no way to free up a hash table. */
351 /* An element in the hash table. Most uses will actually use a larger
352 structure, and an instance of this will be the first field. */
354 struct bfd_hash_entry
356 /* Next entry for this hash code. */
357 struct bfd_hash_entry
*next
;
358 /* String being hashed. */
360 /* Hash code. This is the full hash code, not the index into the
367 struct bfd_hash_table
369 /* The hash array. */
370 struct bfd_hash_entry
**table
;
371 /* The number of slots in the hash table. */
373 /* A function used to create new elements in the hash table. The
374 first entry is itself a pointer to an element. When this
375 function is first invoked, this pointer will be NULL. However,
376 having the pointer permits a hierarchy of method functions to be
377 built each of which calls the function in the superclass. Thus
378 each function should be written to allocate a new block of memory
379 only if the argument is NULL. */
380 struct bfd_hash_entry
*(*newfunc
) PARAMS ((struct bfd_hash_entry
*,
381 struct bfd_hash_table
*,
383 /* An objalloc for this hash table. This is a struct objalloc *,
384 but we use PTR to avoid requiring the inclusion of objalloc.h. */
388 /* Initialize a hash table. */
389 extern boolean bfd_hash_table_init
390 PARAMS ((struct bfd_hash_table
*,
391 struct bfd_hash_entry
*(*) (struct bfd_hash_entry
*,
392 struct bfd_hash_table
*,
395 /* Initialize a hash table specifying a size. */
396 extern boolean bfd_hash_table_init_n
397 PARAMS ((struct bfd_hash_table
*,
398 struct bfd_hash_entry
*(*) (struct bfd_hash_entry
*,
399 struct bfd_hash_table
*,
403 /* Free up a hash table. */
404 extern void bfd_hash_table_free
PARAMS ((struct bfd_hash_table
*));
406 /* Look up a string in a hash table. If CREATE is true, a new entry
407 will be created for this string if one does not already exist. The
408 COPY argument must be true if this routine should copy the string
409 into newly allocated memory when adding an entry. */
410 extern struct bfd_hash_entry
*bfd_hash_lookup
411 PARAMS ((struct bfd_hash_table
*, const char *, boolean create
,
414 /* Replace an entry in a hash table. */
415 extern void bfd_hash_replace
416 PARAMS ((struct bfd_hash_table
*, struct bfd_hash_entry
*old
,
417 struct bfd_hash_entry
*nw
));
419 /* Base method for creating a hash table entry. */
420 extern struct bfd_hash_entry
*bfd_hash_newfunc
421 PARAMS ((struct bfd_hash_entry
*, struct bfd_hash_table
*,
424 /* Grab some space for a hash table entry. */
425 extern PTR bfd_hash_allocate
PARAMS ((struct bfd_hash_table
*,
428 /* Traverse a hash table in a random order, calling a function on each
429 element. If the function returns false, the traversal stops. The
430 INFO argument is passed to the function. */
431 extern void bfd_hash_traverse
PARAMS ((struct bfd_hash_table
*,
432 boolean (*) (struct bfd_hash_entry
*,
436 /* Semi-portable string concatenation in cpp.
437 The CAT4 hack is to avoid a problem with some strict ANSI C preprocessors.
438 The problem is, "32_" is not a valid preprocessing token, and we don't
439 want extra underscores (e.g., "nlm_32_"). The XCAT2 macro will cause the
440 inner CAT macros to be evaluated first, producing still-valid pp-tokens.
441 Then the final concatenation can be done. (Sigh.) */
444 #define CAT(a,b) a##b
445 #define CAT3(a,b,c) a##b##c
446 #define CAT4(a,b,c,d) a##b##c##d
448 #if defined(__STDC__) || defined(ALMOST_STDC)
449 #define CAT(a,b) a##b
450 #define CAT3(a,b,c) a##b##c
451 #define XCAT2(a,b) CAT(a,b)
452 #define CAT4(a,b,c,d) XCAT2(CAT(a,b),CAT(c,d))
454 #define CAT(a,b) a/**/b
455 #define CAT3(a,b,c) a/**/b/**/c
456 #define CAT4(a,b,c,d) a/**/b/**/c/**/d
461 #define COFF_SWAP_TABLE (PTR) &bfd_coff_std_swap_table
463 /* User program access to BFD facilities */
465 /* Direct I/O routines, for programs which know more about the object
466 file than BFD does. Use higher level routines if possible. */
468 extern bfd_size_type bfd_read
469 PARAMS ((PTR
, bfd_size_type size
, bfd_size_type nitems
, bfd
*abfd
));
470 extern bfd_size_type bfd_write
471 PARAMS ((const PTR
, bfd_size_type size
, bfd_size_type nitems
, bfd
*abfd
));
472 extern int bfd_seek
PARAMS ((bfd
*abfd
, file_ptr fp
, int direction
));
473 extern long bfd_tell
PARAMS ((bfd
*abfd
));
474 extern int bfd_flush
PARAMS ((bfd
*abfd
));
475 extern int bfd_stat
PARAMS ((bfd
*abfd
, struct stat
*));
478 /* Cast from const char * to char * so that caller can assign to
479 a char * without a warning. */
480 #define bfd_get_filename(abfd) ((char *) (abfd)->filename)
481 #define bfd_get_cacheable(abfd) ((abfd)->cacheable)
482 #define bfd_get_format(abfd) ((abfd)->format)
483 #define bfd_get_target(abfd) ((abfd)->xvec->name)
484 #define bfd_get_flavour(abfd) ((abfd)->xvec->flavour)
485 #define bfd_big_endian(abfd) ((abfd)->xvec->byteorder == BFD_ENDIAN_BIG)
486 #define bfd_little_endian(abfd) ((abfd)->xvec->byteorder == BFD_ENDIAN_LITTLE)
487 #define bfd_header_big_endian(abfd) \
488 ((abfd)->xvec->header_byteorder == BFD_ENDIAN_BIG)
489 #define bfd_header_little_endian(abfd) \
490 ((abfd)->xvec->header_byteorder == BFD_ENDIAN_LITTLE)
491 #define bfd_get_file_flags(abfd) ((abfd)->flags)
492 #define bfd_applicable_file_flags(abfd) ((abfd)->xvec->object_flags)
493 #define bfd_applicable_section_flags(abfd) ((abfd)->xvec->section_flags)
494 #define bfd_my_archive(abfd) ((abfd)->my_archive)
495 #define bfd_has_map(abfd) ((abfd)->has_armap)
497 #define bfd_valid_reloc_types(abfd) ((abfd)->xvec->valid_reloc_types)
498 #define bfd_usrdata(abfd) ((abfd)->usrdata)
500 #define bfd_get_start_address(abfd) ((abfd)->start_address)
501 #define bfd_get_symcount(abfd) ((abfd)->symcount)
502 #define bfd_get_outsymbols(abfd) ((abfd)->outsymbols)
503 #define bfd_count_sections(abfd) ((abfd)->section_count)
505 #define bfd_get_symbol_leading_char(abfd) ((abfd)->xvec->symbol_leading_char)
507 #define bfd_set_cacheable(abfd,bool) (((abfd)->cacheable = (boolean)(bool)), true)
509 extern boolean bfd_record_phdr
510 PARAMS ((bfd
*, unsigned long, boolean
, flagword
, boolean
, bfd_vma
,
511 boolean
, boolean
, unsigned int, struct sec
**));
513 /* Byte swapping routines. */
515 bfd_vma bfd_getb64
PARAMS ((const unsigned char *));
516 bfd_vma bfd_getl64
PARAMS ((const unsigned char *));
517 bfd_signed_vma bfd_getb_signed_64
PARAMS ((const unsigned char *));
518 bfd_signed_vma bfd_getl_signed_64
PARAMS ((const unsigned char *));
519 bfd_vma bfd_getb32
PARAMS ((const unsigned char *));
520 bfd_vma bfd_getl32
PARAMS ((const unsigned char *));
521 bfd_signed_vma bfd_getb_signed_32
PARAMS ((const unsigned char *));
522 bfd_signed_vma bfd_getl_signed_32
PARAMS ((const unsigned char *));
523 bfd_vma bfd_getb16
PARAMS ((const unsigned char *));
524 bfd_vma bfd_getl16
PARAMS ((const unsigned char *));
525 bfd_signed_vma bfd_getb_signed_16
PARAMS ((const unsigned char *));
526 bfd_signed_vma bfd_getl_signed_16
PARAMS ((const unsigned char *));
527 void bfd_putb64
PARAMS ((bfd_vma
, unsigned char *));
528 void bfd_putl64
PARAMS ((bfd_vma
, unsigned char *));
529 void bfd_putb32
PARAMS ((bfd_vma
, unsigned char *));
530 void bfd_putl32
PARAMS ((bfd_vma
, unsigned char *));
531 void bfd_putb16
PARAMS ((bfd_vma
, unsigned char *));
532 void bfd_putl16
PARAMS ((bfd_vma
, unsigned char *));
534 /* Externally visible ECOFF routines. */
536 #if defined(__STDC__) || defined(ALMOST_STDC)
537 struct ecoff_debug_info
;
538 struct ecoff_debug_swap
;
540 struct symbol_cache_entry
;
541 struct bfd_link_info
;
542 struct bfd_link_hash_entry
;
543 struct bfd_elf_version_tree
;
545 extern bfd_vma bfd_ecoff_get_gp_value
PARAMS ((bfd
* abfd
));
546 extern boolean bfd_ecoff_set_gp_value
PARAMS ((bfd
*abfd
, bfd_vma gp_value
));
547 extern boolean bfd_ecoff_set_regmasks
548 PARAMS ((bfd
*abfd
, unsigned long gprmask
, unsigned long fprmask
,
549 unsigned long *cprmask
));
550 extern PTR bfd_ecoff_debug_init
551 PARAMS ((bfd
*output_bfd
, struct ecoff_debug_info
*output_debug
,
552 const struct ecoff_debug_swap
*output_swap
,
553 struct bfd_link_info
*));
554 extern void bfd_ecoff_debug_free
555 PARAMS ((PTR handle
, bfd
*output_bfd
, struct ecoff_debug_info
*output_debug
,
556 const struct ecoff_debug_swap
*output_swap
,
557 struct bfd_link_info
*));
558 extern boolean bfd_ecoff_debug_accumulate
559 PARAMS ((PTR handle
, bfd
*output_bfd
, struct ecoff_debug_info
*output_debug
,
560 const struct ecoff_debug_swap
*output_swap
,
561 bfd
*input_bfd
, struct ecoff_debug_info
*input_debug
,
562 const struct ecoff_debug_swap
*input_swap
,
563 struct bfd_link_info
*));
564 extern boolean bfd_ecoff_debug_accumulate_other
565 PARAMS ((PTR handle
, bfd
*output_bfd
, struct ecoff_debug_info
*output_debug
,
566 const struct ecoff_debug_swap
*output_swap
, bfd
*input_bfd
,
567 struct bfd_link_info
*));
568 extern boolean bfd_ecoff_debug_externals
569 PARAMS ((bfd
*abfd
, struct ecoff_debug_info
*debug
,
570 const struct ecoff_debug_swap
*swap
,
571 boolean relocateable
,
572 boolean (*get_extr
) (struct symbol_cache_entry
*,
573 struct ecoff_extr
*),
574 void (*set_index
) (struct symbol_cache_entry
*,
576 extern boolean bfd_ecoff_debug_one_external
577 PARAMS ((bfd
*abfd
, struct ecoff_debug_info
*debug
,
578 const struct ecoff_debug_swap
*swap
,
579 const char *name
, struct ecoff_extr
*esym
));
580 extern bfd_size_type bfd_ecoff_debug_size
581 PARAMS ((bfd
*abfd
, struct ecoff_debug_info
*debug
,
582 const struct ecoff_debug_swap
*swap
));
583 extern boolean bfd_ecoff_write_debug
584 PARAMS ((bfd
*abfd
, struct ecoff_debug_info
*debug
,
585 const struct ecoff_debug_swap
*swap
, file_ptr where
));
586 extern boolean bfd_ecoff_write_accumulated_debug
587 PARAMS ((PTR handle
, bfd
*abfd
, struct ecoff_debug_info
*debug
,
588 const struct ecoff_debug_swap
*swap
,
589 struct bfd_link_info
*info
, file_ptr where
));
590 extern boolean bfd_mips_ecoff_create_embedded_relocs
591 PARAMS ((bfd
*, struct bfd_link_info
*, struct sec
*, struct sec
*,
594 /* Externally visible ELF routines. */
596 struct bfd_link_needed_list
598 struct bfd_link_needed_list
*next
;
603 extern boolean bfd_elf32_record_link_assignment
604 PARAMS ((bfd
*, struct bfd_link_info
*, const char *, boolean
));
605 extern boolean bfd_elf64_record_link_assignment
606 PARAMS ((bfd
*, struct bfd_link_info
*, const char *, boolean
));
607 extern struct bfd_link_needed_list
*bfd_elf_get_needed_list
608 PARAMS ((bfd
*, struct bfd_link_info
*));
609 extern boolean bfd_elf32_size_dynamic_sections
610 PARAMS ((bfd
*, const char *, const char *, boolean
, const char *,
611 const char * const *, struct bfd_link_info
*, struct sec
**,
612 struct bfd_elf_version_tree
*));
613 extern boolean bfd_elf64_size_dynamic_sections
614 PARAMS ((bfd
*, const char *, const char *, boolean
, const char *,
615 const char * const *, struct bfd_link_info
*, struct sec
**,
616 struct bfd_elf_version_tree
*));
617 extern void bfd_elf_set_dt_needed_name
PARAMS ((bfd
*, const char *));
618 extern const char *bfd_elf_get_dt_soname
PARAMS ((bfd
*));
620 /* SunOS shared library support routines for the linker. */
622 extern struct bfd_link_needed_list
*bfd_sunos_get_needed_list
623 PARAMS ((bfd
*, struct bfd_link_info
*));
624 extern boolean bfd_sunos_record_link_assignment
625 PARAMS ((bfd
*, struct bfd_link_info
*, const char *));
626 extern boolean bfd_sunos_size_dynamic_sections
627 PARAMS ((bfd
*, struct bfd_link_info
*, struct sec
**, struct sec
**,
630 /* Linux shared library support routines for the linker. */
632 extern boolean bfd_i386linux_size_dynamic_sections
633 PARAMS ((bfd
*, struct bfd_link_info
*));
634 extern boolean bfd_m68klinux_size_dynamic_sections
635 PARAMS ((bfd
*, struct bfd_link_info
*));
636 extern boolean bfd_sparclinux_size_dynamic_sections
637 PARAMS ((bfd
*, struct bfd_link_info
*));
641 struct _bfd_window_internal
;
642 typedef struct _bfd_window_internal bfd_window_internal
;
644 typedef struct _bfd_window
{
645 /* What the user asked for. */
648 /* The actual window used by BFD. Small user-requested read-only
649 regions sharing a page may share a single window into the object
650 file. Read-write versions shouldn't until I've fixed things to
651 keep track of which portions have been claimed by the
652 application; don't want to give the same region back when the
653 application wants two writable copies! */
654 struct _bfd_window_internal
*i
;
657 extern void bfd_init_window
PARAMS ((bfd_window
*));
658 extern void bfd_free_window
PARAMS ((bfd_window
*));
659 extern boolean bfd_get_file_window
660 PARAMS ((bfd
*, file_ptr
, bfd_size_type
, bfd_window
*, boolean
));
662 /* XCOFF support routines for the linker. */
664 extern boolean bfd_xcoff_link_record_set
665 PARAMS ((bfd
*, struct bfd_link_info
*, struct bfd_link_hash_entry
*,
667 extern boolean bfd_xcoff_import_symbol
668 PARAMS ((bfd
*, struct bfd_link_info
*, struct bfd_link_hash_entry
*,
669 bfd_vma
, const char *, const char *, const char *));
670 extern boolean bfd_xcoff_export_symbol
671 PARAMS ((bfd
*, struct bfd_link_info
*, struct bfd_link_hash_entry
*,
673 extern boolean bfd_xcoff_link_count_reloc
674 PARAMS ((bfd
*, struct bfd_link_info
*, const char *));
675 extern boolean bfd_xcoff_record_link_assignment
676 PARAMS ((bfd
*, struct bfd_link_info
*, const char *));
677 extern boolean bfd_xcoff_size_dynamic_sections
678 PARAMS ((bfd
*, struct bfd_link_info
*, const char *, const char *,
679 unsigned long, unsigned long, unsigned long, boolean
,
680 int, boolean
, boolean
, struct sec
**));
682 /* Externally visible COFF routines. */
684 #if defined(__STDC__) || defined(ALMOST_STDC)
685 struct internal_syment
;
686 union internal_auxent
;
689 extern boolean bfd_coff_get_syment
690 PARAMS ((bfd
*, struct symbol_cache_entry
*, struct internal_syment
*));
691 extern boolean bfd_coff_get_auxent
692 PARAMS ((bfd
*, struct symbol_cache_entry
*, int, union internal_auxent
*));
694 /* And more from the source. */
696 bfd_init
PARAMS ((void));
699 bfd_openr
PARAMS ((CONST
char *filename
, CONST
char *target
));
702 bfd_fdopenr
PARAMS ((CONST
char *filename
, CONST
char *target
, int fd
));
705 bfd_openstreamr
PARAMS ((const char *, const char *, PTR
));
708 bfd_openw
PARAMS ((CONST
char *filename
, CONST
char *target
));
711 bfd_close
PARAMS ((bfd
*abfd
));
714 bfd_close_all_done
PARAMS ((bfd
*));
717 bfd_create
PARAMS ((CONST
char *filename
, bfd
*templ
));
720 /* Byte swapping macros for user section data. */
722 #define bfd_put_8(abfd, val, ptr) \
723 (*((unsigned char *)(ptr)) = (unsigned char)(val))
724 #define bfd_put_signed_8 \
726 #define bfd_get_8(abfd, ptr) \
727 (*(unsigned char *)(ptr))
728 #define bfd_get_signed_8(abfd, ptr) \
729 ((*(unsigned char *)(ptr) ^ 0x80) - 0x80)
731 #define bfd_put_16(abfd, val, ptr) \
732 BFD_SEND(abfd, bfd_putx16, ((val),(ptr)))
733 #define bfd_put_signed_16 \
735 #define bfd_get_16(abfd, ptr) \
736 BFD_SEND(abfd, bfd_getx16, (ptr))
737 #define bfd_get_signed_16(abfd, ptr) \
738 BFD_SEND (abfd, bfd_getx_signed_16, (ptr))
740 #define bfd_put_32(abfd, val, ptr) \
741 BFD_SEND(abfd, bfd_putx32, ((val),(ptr)))
742 #define bfd_put_signed_32 \
744 #define bfd_get_32(abfd, ptr) \
745 BFD_SEND(abfd, bfd_getx32, (ptr))
746 #define bfd_get_signed_32(abfd, ptr) \
747 BFD_SEND(abfd, bfd_getx_signed_32, (ptr))
749 #define bfd_put_64(abfd, val, ptr) \
750 BFD_SEND(abfd, bfd_putx64, ((val), (ptr)))
751 #define bfd_put_signed_64 \
753 #define bfd_get_64(abfd, ptr) \
754 BFD_SEND(abfd, bfd_getx64, (ptr))
755 #define bfd_get_signed_64(abfd, ptr) \
756 BFD_SEND(abfd, bfd_getx_signed_64, (ptr))
759 /* Byte swapping macros for file header data. */
761 #define bfd_h_put_8(abfd, val, ptr) \
762 bfd_put_8 (abfd, val, ptr)
763 #define bfd_h_put_signed_8(abfd, val, ptr) \
764 bfd_put_8 (abfd, val, ptr)
765 #define bfd_h_get_8(abfd, ptr) \
766 bfd_get_8 (abfd, ptr)
767 #define bfd_h_get_signed_8(abfd, ptr) \
768 bfd_get_signed_8 (abfd, ptr)
770 #define bfd_h_put_16(abfd, val, ptr) \
771 BFD_SEND(abfd, bfd_h_putx16,(val,ptr))
772 #define bfd_h_put_signed_16 \
774 #define bfd_h_get_16(abfd, ptr) \
775 BFD_SEND(abfd, bfd_h_getx16,(ptr))
776 #define bfd_h_get_signed_16(abfd, ptr) \
777 BFD_SEND(abfd, bfd_h_getx_signed_16, (ptr))
779 #define bfd_h_put_32(abfd, val, ptr) \
780 BFD_SEND(abfd, bfd_h_putx32,(val,ptr))
781 #define bfd_h_put_signed_32 \
783 #define bfd_h_get_32(abfd, ptr) \
784 BFD_SEND(abfd, bfd_h_getx32,(ptr))
785 #define bfd_h_get_signed_32(abfd, ptr) \
786 BFD_SEND(abfd, bfd_h_getx_signed_32, (ptr))
788 #define bfd_h_put_64(abfd, val, ptr) \
789 BFD_SEND(abfd, bfd_h_putx64,(val, ptr))
790 #define bfd_h_put_signed_64 \
792 #define bfd_h_get_64(abfd, ptr) \
793 BFD_SEND(abfd, bfd_h_getx64,(ptr))
794 #define bfd_h_get_signed_64(abfd, ptr) \
795 BFD_SEND(abfd, bfd_h_getx_signed_64, (ptr))
799 /* The name of the section; the name isn't a copy, the pointer is
800 the same as that passed to bfd_make_section. */
804 /* Which section is it; 0..nth. */
808 /* The next section in the list belonging to the BFD, or NULL. */
812 /* The field flags contains attributes of the section. Some
813 flags are read in from the object file, and some are
814 synthesized from other information. */
818 #define SEC_NO_FLAGS 0x000
820 /* Tells the OS to allocate space for this section when loading.
821 This is clear for a section containing debug information
823 #define SEC_ALLOC 0x001
825 /* Tells the OS to load the section from the file when loading.
826 This is clear for a .bss section. */
827 #define SEC_LOAD 0x002
829 /* The section contains data still to be relocated, so there is
830 some relocation information too. */
831 #define SEC_RELOC 0x004
833 #if 0 /* Obsolete ? */
834 #define SEC_BALIGN 0x008
837 /* A signal to the OS that the section contains read only
839 #define SEC_READONLY 0x010
841 /* The section contains code only. */
842 #define SEC_CODE 0x020
844 /* The section contains data only. */
845 #define SEC_DATA 0x040
847 /* The section will reside in ROM. */
848 #define SEC_ROM 0x080
850 /* The section contains constructor information. This section
851 type is used by the linker to create lists of constructors and
852 destructors used by <<g++>>. When a back end sees a symbol
853 which should be used in a constructor list, it creates a new
854 section for the type of name (e.g., <<__CTOR_LIST__>>), attaches
855 the symbol to it, and builds a relocation. To build the lists
856 of constructors, all the linker has to do is catenate all the
857 sections called <<__CTOR_LIST__>> and relocate the data
858 contained within - exactly the operations it would peform on
860 #define SEC_CONSTRUCTOR 0x100
862 /* The section is a constuctor, and should be placed at the
863 end of the text, data, or bss section(?). */
864 #define SEC_CONSTRUCTOR_TEXT 0x1100
865 #define SEC_CONSTRUCTOR_DATA 0x2100
866 #define SEC_CONSTRUCTOR_BSS 0x3100
868 /* The section has contents - a data section could be
869 <<SEC_ALLOC>> | <<SEC_HAS_CONTENTS>>; a debug section could be
870 <<SEC_HAS_CONTENTS>> */
871 #define SEC_HAS_CONTENTS 0x200
873 /* An instruction to the linker to not output the section
874 even if it has information which would normally be written. */
875 #define SEC_NEVER_LOAD 0x400
877 /* The section is a COFF shared library section. This flag is
878 only for the linker. If this type of section appears in
879 the input file, the linker must copy it to the output file
880 without changing the vma or size. FIXME: Although this
881 was originally intended to be general, it really is COFF
882 specific (and the flag was renamed to indicate this). It
883 might be cleaner to have some more general mechanism to
884 allow the back end to control what the linker does with
886 #define SEC_COFF_SHARED_LIBRARY 0x800
888 /* The section contains common symbols (symbols may be defined
889 multiple times, the value of a symbol is the amount of
890 space it requires, and the largest symbol value is the one
891 used). Most targets have exactly one of these (which we
892 translate to bfd_com_section_ptr), but ECOFF has two. */
893 #define SEC_IS_COMMON 0x8000
895 /* The section contains only debugging information. For
896 example, this is set for ELF .debug and .stab sections.
897 strip tests this flag to see if a section can be
899 #define SEC_DEBUGGING 0x10000
901 /* The contents of this section are held in memory pointed to
902 by the contents field. This is checked by
903 bfd_get_section_contents, and the data is retrieved from
904 memory if appropriate. */
905 #define SEC_IN_MEMORY 0x20000
907 /* The contents of this section are to be excluded by the
908 linker for executable and shared objects unless those
909 objects are to be further relocated. */
910 #define SEC_EXCLUDE 0x40000
912 /* The contents of this section are to be sorted by the
913 based on the address specified in the associated symbol
915 #define SEC_SORT_ENTRIES 0x80000
917 /* When linking, duplicate sections of the same name should be
918 discarded, rather than being combined into a single section as
919 is usually done. This is similar to how common symbols are
920 handled. See SEC_LINK_DUPLICATES below. */
921 #define SEC_LINK_ONCE 0x100000
923 /* If SEC_LINK_ONCE is set, this bitfield describes how the linker
924 should handle duplicate sections. */
925 #define SEC_LINK_DUPLICATES 0x600000
927 /* This value for SEC_LINK_DUPLICATES means that duplicate
928 sections with the same name should simply be discarded. */
929 #define SEC_LINK_DUPLICATES_DISCARD 0x0
931 /* This value for SEC_LINK_DUPLICATES means that the linker
932 should warn if there are any duplicate sections, although
933 it should still only link one copy. */
934 #define SEC_LINK_DUPLICATES_ONE_ONLY 0x200000
936 /* This value for SEC_LINK_DUPLICATES means that the linker
937 should warn if any duplicate sections are a different size. */
938 #define SEC_LINK_DUPLICATES_SAME_SIZE 0x400000
940 /* This value for SEC_LINK_DUPLICATES means that the linker
941 should warn if any duplicate sections contain different
943 #define SEC_LINK_DUPLICATES_SAME_CONTENTS 0x600000
945 /* This section was created by the linker as part of dynamic
946 relocation or other arcane processing. It is skipped when
947 going through the first-pass output, trusting that someone
948 else up the line will take care of it later. */
949 #define SEC_LINKER_CREATED 0x800000
951 /* End of section flags. */
953 /* Some internal packed boolean fields. */
955 /* See the vma field. */
956 unsigned int user_set_vma
: 1;
958 /* Whether relocations have been processed. */
959 unsigned int reloc_done
: 1;
961 /* A mark flag used by some of the linker backends. */
962 unsigned int linker_mark
: 1;
964 /* End of internal packed boolean fields. */
966 /* The virtual memory address of the section - where it will be
967 at run time. The symbols are relocated against this. The
968 user_set_vma flag is maintained by bfd; if it's not set, the
969 backend can assign addresses (for example, in <<a.out>>, where
970 the default address for <<.data>> is dependent on the specific
971 target and various flags). */
975 /* The load address of the section - where it would be in a
976 rom image; really only used for writing section header
981 /* The size of the section in bytes, as it will be output.
982 contains a value even if the section has no contents (e.g., the
983 size of <<.bss>>). This will be filled in after relocation */
985 bfd_size_type _cooked_size
;
987 /* The original size on disk of the section, in bytes. Normally this
988 value is the same as the size, but if some relaxing has
989 been done, then this value will be bigger. */
991 bfd_size_type _raw_size
;
993 /* If this section is going to be output, then this value is the
994 offset into the output section of the first byte in the input
995 section. E.g., if this was going to start at the 100th byte in
996 the output section, this value would be 100. */
998 bfd_vma output_offset
;
1000 /* The output section through which to map on output. */
1002 struct sec
*output_section
;
1004 /* The alignment requirement of the section, as an exponent of 2 -
1005 e.g., 3 aligns to 2^3 (or 8). */
1007 unsigned int alignment_power
;
1009 /* If an input section, a pointer to a vector of relocation
1010 records for the data in this section. */
1012 struct reloc_cache_entry
*relocation
;
1014 /* If an output section, a pointer to a vector of pointers to
1015 relocation records for the data in this section. */
1017 struct reloc_cache_entry
**orelocation
;
1019 /* The number of relocation records in one of the above */
1021 unsigned reloc_count
;
1023 /* Information below is back end specific - and not always used
1026 /* File position of section data */
1030 /* File position of relocation info */
1032 file_ptr rel_filepos
;
1034 /* File position of line data */
1036 file_ptr line_filepos
;
1038 /* Pointer to data for applications */
1042 /* If the SEC_IN_MEMORY flag is set, this points to the actual
1044 unsigned char *contents
;
1046 /* Attached line number information */
1050 /* Number of line number records */
1052 unsigned int lineno_count
;
1054 /* When a section is being output, this value changes as more
1055 linenumbers are written out */
1057 file_ptr moving_line_filepos
;
1059 /* What the section number is in the target world */
1065 /* If this is a constructor section then here is a list of the
1066 relocations created to relocate items within it. */
1068 struct relent_chain
*constructor_chain
;
1070 /* The BFD which owns the section. */
1074 /* A symbol which points at this section only */
1075 struct symbol_cache_entry
*symbol
;
1076 struct symbol_cache_entry
**symbol_ptr_ptr
;
1078 struct bfd_link_order
*link_order_head
;
1079 struct bfd_link_order
*link_order_tail
;
1082 /* These sections are global, and are managed by BFD. The application
1083 and target back end are not permitted to change the values in
1084 these sections. New code should use the section_ptr macros rather
1085 than referring directly to the const sections. The const sections
1086 may eventually vanish. */
1087 #define BFD_ABS_SECTION_NAME "*ABS*"
1088 #define BFD_UND_SECTION_NAME "*UND*"
1089 #define BFD_COM_SECTION_NAME "*COM*"
1090 #define BFD_IND_SECTION_NAME "*IND*"
1092 /* the absolute section */
1093 extern const asection bfd_abs_section
;
1094 #define bfd_abs_section_ptr ((asection *) &bfd_abs_section)
1095 #define bfd_is_abs_section(sec) ((sec) == bfd_abs_section_ptr)
1096 /* Pointer to the undefined section */
1097 extern const asection bfd_und_section
;
1098 #define bfd_und_section_ptr ((asection *) &bfd_und_section)
1099 #define bfd_is_und_section(sec) ((sec) == bfd_und_section_ptr)
1100 /* Pointer to the common section */
1101 extern const asection bfd_com_section
;
1102 #define bfd_com_section_ptr ((asection *) &bfd_com_section)
1103 /* Pointer to the indirect section */
1104 extern const asection bfd_ind_section
;
1105 #define bfd_ind_section_ptr ((asection *) &bfd_ind_section)
1106 #define bfd_is_ind_section(sec) ((sec) == bfd_ind_section_ptr)
1108 extern const struct symbol_cache_entry
* const bfd_abs_symbol
;
1109 extern const struct symbol_cache_entry
* const bfd_com_symbol
;
1110 extern const struct symbol_cache_entry
* const bfd_und_symbol
;
1111 extern const struct symbol_cache_entry
* const bfd_ind_symbol
;
1112 #define bfd_get_section_size_before_reloc(section) \
1113 (section->reloc_done ? (abort(),1): (section)->_raw_size)
1114 #define bfd_get_section_size_after_reloc(section) \
1115 ((section->reloc_done) ? (section)->_cooked_size: (abort(),1))
1117 bfd_get_section_by_name
PARAMS ((bfd
*abfd
, CONST
char *name
));
1120 bfd_make_section_old_way
PARAMS ((bfd
*abfd
, CONST
char *name
));
1123 bfd_make_section_anyway
PARAMS ((bfd
*abfd
, CONST
char *name
));
1126 bfd_make_section
PARAMS ((bfd
*, CONST
char *name
));
1129 bfd_set_section_flags
PARAMS ((bfd
*abfd
, asection
*sec
, flagword flags
));
1132 bfd_map_over_sections
PARAMS ((bfd
*abfd
,
1133 void (*func
)(bfd
*abfd
,
1139 bfd_set_section_size
PARAMS ((bfd
*abfd
, asection
*sec
, bfd_size_type val
));
1142 bfd_set_section_contents
1147 bfd_size_type count
));
1150 bfd_get_section_contents
1151 PARAMS ((bfd
*abfd
, asection
*section
, PTR location
,
1152 file_ptr offset
, bfd_size_type count
));
1155 bfd_copy_private_section_data
PARAMS ((bfd
*ibfd
, asection
*isec
, bfd
*obfd
, asection
*osec
));
1157 #define bfd_copy_private_section_data(ibfd, isection, obfd, osection) \
1158 BFD_SEND (obfd, _bfd_copy_private_section_data, \
1159 (ibfd, isection, obfd, osection))
1160 enum bfd_architecture
1162 bfd_arch_unknown
, /* File arch not known */
1163 bfd_arch_obscure
, /* Arch known, not one of these */
1164 bfd_arch_m68k
, /* Motorola 68xxx */
1165 bfd_arch_vax
, /* DEC Vax */
1166 bfd_arch_i960
, /* Intel 960 */
1167 /* The order of the following is important.
1168 lower number indicates a machine type that
1169 only accepts a subset of the instructions
1170 available to machines with higher numbers.
1171 The exception is the "ca", which is
1172 incompatible with all other machines except
1175 #define bfd_mach_i960_core 1
1176 #define bfd_mach_i960_ka_sa 2
1177 #define bfd_mach_i960_kb_sb 3
1178 #define bfd_mach_i960_mc 4
1179 #define bfd_mach_i960_xa 5
1180 #define bfd_mach_i960_ca 6
1181 #define bfd_mach_i960_jx 7
1182 #define bfd_mach_i960_hx 8
1184 bfd_arch_a29k
, /* AMD 29000 */
1185 bfd_arch_sparc
, /* SPARC */
1186 #define bfd_mach_sparc 1
1187 /* The difference between v8plus and v9 is that v9 is a true 64 bit env. */
1188 #define bfd_mach_sparc_sparclet 2
1189 #define bfd_mach_sparc_sparclite 3
1190 #define bfd_mach_sparc_v8plus 4
1191 #define bfd_mach_sparc_v8plusa 5 /* with ultrasparc add'ns */
1192 #define bfd_mach_sparc_v9 6
1193 #define bfd_mach_sparc_v9a 7 /* with ultrasparc add'ns */
1194 /* Nonzero if MACH has the v9 instruction set. */
1195 #define bfd_mach_sparc_v9_p(mach) \
1196 ((mach) >= bfd_mach_sparc_v8plus && (mach) <= bfd_mach_sparc_v9a)
1197 bfd_arch_mips
, /* MIPS Rxxxx */
1198 #define bfd_mach_mips3000 3000
1199 #define bfd_mach_mips6000 6000
1200 #define bfd_mach_mips4000 4000
1201 #define bfd_mach_mips8000 8000
1202 #define bfd_mach_mips16 16
1203 /* start-sanitize-vr5400 */
1204 #define bfd_mach_vr5400 5400
1205 #define bfd_mach_vr5000 5000
1206 /* end-sanitize-vr5400 */
1207 bfd_arch_i386
, /* Intel 386 */
1208 #define bfd_mach_i386_i386 0
1209 #define bfd_mach_i386_i8086 1
1210 bfd_arch_we32k
, /* AT&T WE32xxx */
1211 bfd_arch_tahoe
, /* CCI/Harris Tahoe */
1212 bfd_arch_i860
, /* Intel 860 */
1213 bfd_arch_romp
, /* IBM ROMP PC/RT */
1214 bfd_arch_alliant
, /* Alliant */
1215 bfd_arch_convex
, /* Convex */
1216 bfd_arch_m88k
, /* Motorola 88xxx */
1217 bfd_arch_pyramid
, /* Pyramid Technology */
1218 bfd_arch_h8300
, /* Hitachi H8/300 */
1219 #define bfd_mach_h8300 1
1220 #define bfd_mach_h8300h 2
1221 #define bfd_mach_h8300s 3
1222 bfd_arch_powerpc
, /* PowerPC */
1223 bfd_arch_rs6000
, /* IBM RS/6000 */
1224 bfd_arch_hppa
, /* HP PA RISC */
1225 bfd_arch_d10v
, /* Mitsubishi D10V */
1226 /* start-sanitize-d30v */
1227 bfd_arch_d30v
, /* Mitsubishi D30V */
1228 /* end-sanitize-d30v */
1229 bfd_arch_z8k
, /* Zilog Z8000 */
1230 #define bfd_mach_z8001 1
1231 #define bfd_mach_z8002 2
1232 bfd_arch_h8500
, /* Hitachi H8/500 */
1233 bfd_arch_sh
, /* Hitachi SH */
1234 #define bfd_mach_sh 0
1235 #define bfd_mach_sh3 0x30
1236 #define bfd_mach_sh3e 0x3e
1237 /* start-sanitize-sh4 */
1238 #define bfd_mach_sh4 0x40
1239 /* end-sanitize-sh4 */
1240 bfd_arch_alpha
, /* Dec Alpha */
1241 bfd_arch_arm
, /* Advanced Risc Machines ARM */
1242 #define bfd_mach_arm_2 1
1243 #define bfd_mach_arm_2a 2
1244 #define bfd_mach_arm_3 3
1245 #define bfd_mach_arm_3M 4
1246 #define bfd_mach_arm_4 5
1247 #define bfd_mach_arm_4T 6
1248 bfd_arch_ns32k
, /* National Semiconductors ns32000 */
1249 bfd_arch_w65
, /* WDC 65816 */
1250 /* start-sanitize-tic80 */
1251 bfd_arch_tic80
, /* TI TMS320c80 (MVP) */
1252 /* end-sanitize-tic80 */
1253 /* start-sanitize-sky */
1254 bfd_arch_txvu
, /* TX VU */
1255 #define bfd_mach_txvu 0
1256 /* end-sanitize-sky */
1257 bfd_arch_v850
, /* NEC V850 */
1258 #define bfd_mach_v850 0
1259 /* start-sanitize-v850e */
1260 #define bfd_mach_v850e 'E'
1261 #define bfd_mach_v850ea 'A'
1262 /* end-sanitize-v850e */
1263 bfd_arch_arc
, /* Argonaut RISC Core */
1264 #define bfd_mach_arc_base 0
1265 bfd_arch_m32r
, /* Mitsubishi M32R/D */
1266 #define bfd_mach_m32r 0 /* backwards compatibility */
1267 /* start-sanitize-m32rx */
1268 #define bfd_mach_m32rx 'x'
1269 /* end-sanitize-m32rx */
1270 bfd_arch_mn10200
, /* Matsushita MN10200 */
1271 bfd_arch_mn10300
, /* Matsushita MN10300 */
1275 typedef struct bfd_arch_info
1278 int bits_per_address
;
1280 enum bfd_architecture arch
;
1282 const char *arch_name
;
1283 const char *printable_name
;
1284 unsigned int section_align_power
;
1285 /* true if this is the default machine for the architecture */
1286 boolean the_default
;
1287 const struct bfd_arch_info
* (*compatible
)
1288 PARAMS ((const struct bfd_arch_info
*a
,
1289 const struct bfd_arch_info
*b
));
1291 boolean (*scan
) PARAMS ((const struct bfd_arch_info
*, const char *));
1293 const struct bfd_arch_info
*next
;
1294 } bfd_arch_info_type
;
1296 bfd_printable_name
PARAMS ((bfd
*abfd
));
1298 const bfd_arch_info_type
*
1299 bfd_scan_arch
PARAMS ((const char *string
));
1302 bfd_arch_list
PARAMS ((void));
1304 const bfd_arch_info_type
*
1305 bfd_arch_get_compatible
PARAMS ((
1310 bfd_set_arch_info
PARAMS ((bfd
*abfd
, const bfd_arch_info_type
*arg
));
1312 enum bfd_architecture
1313 bfd_get_arch
PARAMS ((bfd
*abfd
));
1316 bfd_get_mach
PARAMS ((bfd
*abfd
));
1319 bfd_arch_bits_per_byte
PARAMS ((bfd
*abfd
));
1322 bfd_arch_bits_per_address
PARAMS ((bfd
*abfd
));
1324 const bfd_arch_info_type
*
1325 bfd_get_arch_info
PARAMS ((bfd
*abfd
));
1327 const bfd_arch_info_type
*
1329 PARAMS ((enum bfd_architecture
1331 unsigned long machine
));
1334 bfd_printable_arch_mach
1335 PARAMS ((enum bfd_architecture arch
, unsigned long machine
));
1337 typedef enum bfd_reloc_status
1339 /* No errors detected */
1342 /* The relocation was performed, but there was an overflow. */
1345 /* The address to relocate was not within the section supplied. */
1346 bfd_reloc_outofrange
,
1348 /* Used by special functions */
1351 /* Unsupported relocation size requested. */
1352 bfd_reloc_notsupported
,
1357 /* The symbol to relocate against was undefined. */
1358 bfd_reloc_undefined
,
1360 /* The relocation was performed, but may not be ok - presently
1361 generated only when linking i960 coff files with i960 b.out
1362 symbols. If this type is returned, the error_message argument
1363 to bfd_perform_relocation will be set. */
1366 bfd_reloc_status_type
;
1369 typedef struct reloc_cache_entry
1371 /* A pointer into the canonical table of pointers */
1372 struct symbol_cache_entry
**sym_ptr_ptr
;
1374 /* offset in section */
1375 bfd_size_type address
;
1377 /* addend for relocation value */
1380 /* Pointer to how to perform the required relocation */
1381 reloc_howto_type
*howto
;
1384 enum complain_overflow
1386 /* Do not complain on overflow. */
1387 complain_overflow_dont
,
1389 /* Complain if the bitfield overflows, whether it is considered
1390 as signed or unsigned. */
1391 complain_overflow_bitfield
,
1393 /* Complain if the value overflows when considered as signed
1395 complain_overflow_signed
,
1397 /* Complain if the value overflows when considered as an
1399 complain_overflow_unsigned
1402 struct reloc_howto_struct
1404 /* The type field has mainly a documentary use - the back end can
1405 do what it wants with it, though normally the back end's
1406 external idea of what a reloc number is stored
1407 in this field. For example, a PC relative word relocation
1408 in a coff environment has the type 023 - because that's
1409 what the outside world calls a R_PCRWORD reloc. */
1412 /* The value the final relocation is shifted right by. This drops
1413 unwanted data from the relocation. */
1414 unsigned int rightshift
;
1416 /* The size of the item to be relocated. This is *not* a
1417 power-of-two measure. To get the number of bytes operated
1418 on by a type of relocation, use bfd_get_reloc_size. */
1421 /* The number of bits in the item to be relocated. This is used
1422 when doing overflow checking. */
1423 unsigned int bitsize
;
1425 /* Notes that the relocation is relative to the location in the
1426 data section of the addend. The relocation function will
1427 subtract from the relocation value the address of the location
1429 boolean pc_relative
;
1431 /* The bit position of the reloc value in the destination.
1432 The relocated value is left shifted by this amount. */
1433 unsigned int bitpos
;
1435 /* What type of overflow error should be checked for when
1437 enum complain_overflow complain_on_overflow
;
1439 /* If this field is non null, then the supplied function is
1440 called rather than the normal function. This allows really
1441 strange relocation methods to be accomodated (e.g., i960 callj
1443 bfd_reloc_status_type (*special_function
)
1445 arelent
*reloc_entry
,
1446 struct symbol_cache_entry
*symbol
,
1448 asection
*input_section
,
1450 char **error_message
));
1452 /* The textual name of the relocation type. */
1455 /* When performing a partial link, some formats must modify the
1456 relocations rather than the data - this flag signals this.*/
1457 boolean partial_inplace
;
1459 /* The src_mask selects which parts of the read in data
1460 are to be used in the relocation sum. E.g., if this was an 8 bit
1461 bit of data which we read and relocated, this would be
1462 0x000000ff. When we have relocs which have an addend, such as
1463 sun4 extended relocs, the value in the offset part of a
1464 relocating field is garbage so we never use it. In this case
1465 the mask would be 0x00000000. */
1468 /* The dst_mask selects which parts of the instruction are replaced
1469 into the instruction. In most cases src_mask == dst_mask,
1470 except in the above special case, where dst_mask would be
1471 0x000000ff, and src_mask would be 0x00000000. */
1474 /* When some formats create PC relative instructions, they leave
1475 the value of the pc of the place being relocated in the offset
1476 slot of the instruction, so that a PC relative relocation can
1477 be made just by adding in an ordinary offset (e.g., sun3 a.out).
1478 Some formats leave the displacement part of an instruction
1479 empty (e.g., m88k bcs); this flag signals the fact.*/
1480 boolean pcrel_offset
;
1483 #define HOWTO(C, R,S,B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
1484 {(unsigned)C,R,S,B, P, BI, O,SF,NAME,INPLACE,MASKSRC,MASKDST,PC}
1485 #define NEWHOWTO( FUNCTION, NAME,SIZE,REL,IN) HOWTO(0,0,SIZE,0,REL,0,complain_overflow_dont,FUNCTION, NAME,false,0,0,IN)
1487 #define HOWTO_PREPARE(relocation, symbol) \
1489 if (symbol != (asymbol *)NULL) { \
1490 if (bfd_is_com_section (symbol->section)) { \
1494 relocation = symbol->value; \
1499 bfd_get_reloc_size
PARAMS ((reloc_howto_type
*));
1501 typedef struct relent_chain
{
1503 struct relent_chain
*next
;
1505 bfd_reloc_status_type
1508 PARAMS ((enum complain_overflow how
,
1509 unsigned int bitsize
,
1510 unsigned int rightshift
,
1511 bfd_vma relocation
));
1513 bfd_reloc_status_type
1515 bfd_perform_relocation
1517 arelent
*reloc_entry
,
1519 asection
*input_section
,
1521 char **error_message
));
1523 bfd_reloc_status_type
1525 bfd_install_relocation
1527 arelent
*reloc_entry
,
1528 PTR data
, bfd_vma data_start
,
1529 asection
*input_section
,
1530 char **error_message
));
1532 enum bfd_reloc_code_real
{
1533 _dummy_first_bfd_reloc_code_real
,
1536 /* Basic absolute relocations of N bits. */
1545 /* PC-relative relocations. Sometimes these are relative to the address
1546 of the relocation itself; sometimes they are relative to the start of
1547 the section containing the relocation. It depends on the specific target.
1549 The 24-bit relocation is used in some Intel 960 configurations. */
1558 BFD_RELOC_32_GOT_PCREL
,
1559 BFD_RELOC_16_GOT_PCREL
,
1560 BFD_RELOC_8_GOT_PCREL
,
1561 BFD_RELOC_32_GOTOFF
,
1562 BFD_RELOC_16_GOTOFF
,
1563 BFD_RELOC_LO16_GOTOFF
,
1564 BFD_RELOC_HI16_GOTOFF
,
1565 BFD_RELOC_HI16_S_GOTOFF
,
1567 BFD_RELOC_32_PLT_PCREL
,
1568 BFD_RELOC_24_PLT_PCREL
,
1569 BFD_RELOC_16_PLT_PCREL
,
1570 BFD_RELOC_8_PLT_PCREL
,
1571 BFD_RELOC_32_PLTOFF
,
1572 BFD_RELOC_16_PLTOFF
,
1573 BFD_RELOC_LO16_PLTOFF
,
1574 BFD_RELOC_HI16_PLTOFF
,
1575 BFD_RELOC_HI16_S_PLTOFF
,
1578 /* Relocations used by 68K ELF. */
1579 BFD_RELOC_68K_GLOB_DAT
,
1580 BFD_RELOC_68K_JMP_SLOT
,
1581 BFD_RELOC_68K_RELATIVE
,
1583 /* Linkage-table relative. */
1584 BFD_RELOC_32_BASEREL
,
1585 BFD_RELOC_16_BASEREL
,
1586 BFD_RELOC_LO16_BASEREL
,
1587 BFD_RELOC_HI16_BASEREL
,
1588 BFD_RELOC_HI16_S_BASEREL
,
1589 BFD_RELOC_8_BASEREL
,
1592 /* Absolute 8-bit relocation, but used to form an address like 0xFFnn. */
1595 /* These PC-relative relocations are stored as word displacements --
1596 i.e., byte displacements shifted right two bits. The 30-bit word
1597 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1598 SPARC. (SPARC tools generally refer to this as <<WDISP30>>.) The
1599 signed 16-bit displacement is used on the MIPS, and the 23-bit
1600 displacement is used on the Alpha. */
1601 BFD_RELOC_32_PCREL_S2
,
1602 BFD_RELOC_16_PCREL_S2
,
1603 BFD_RELOC_23_PCREL_S2
,
1605 /* High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1606 the target word. These are used on the SPARC. */
1610 /* For systems that allocate a Global Pointer register, these are
1611 displacements off that register. These relocation types are
1612 handled specially, because the value the register will have is
1613 decided relatively late. */
1617 /* Reloc types used for i960/b.out. */
1618 BFD_RELOC_I960_CALLJ
,
1620 /* SPARC ELF relocations. There is probably some overlap with other
1621 relocation types already defined. */
1623 BFD_RELOC_SPARC_WDISP22
,
1626 BFD_RELOC_SPARC_GOT10
,
1627 BFD_RELOC_SPARC_GOT13
,
1628 BFD_RELOC_SPARC_GOT22
,
1629 BFD_RELOC_SPARC_PC10
,
1630 BFD_RELOC_SPARC_PC22
,
1631 BFD_RELOC_SPARC_WPLT30
,
1632 BFD_RELOC_SPARC_COPY
,
1633 BFD_RELOC_SPARC_GLOB_DAT
,
1634 BFD_RELOC_SPARC_JMP_SLOT
,
1635 BFD_RELOC_SPARC_RELATIVE
,
1636 BFD_RELOC_SPARC_UA32
,
1638 /* I think these are specific to SPARC a.out (e.g., Sun 4). */
1639 BFD_RELOC_SPARC_BASE13
,
1640 BFD_RELOC_SPARC_BASE22
,
1642 /* SPARC64 relocations */
1643 #define BFD_RELOC_SPARC_64 BFD_RELOC_64
1646 BFD_RELOC_SPARC_OLO10
,
1647 BFD_RELOC_SPARC_HH22
,
1648 BFD_RELOC_SPARC_HM10
,
1649 BFD_RELOC_SPARC_LM22
,
1650 BFD_RELOC_SPARC_PC_HH22
,
1651 BFD_RELOC_SPARC_PC_HM10
,
1652 BFD_RELOC_SPARC_PC_LM22
,
1653 BFD_RELOC_SPARC_WDISP16
,
1654 BFD_RELOC_SPARC_WDISP19
,
1658 #define BFD_RELOC_SPARC_DISP64 BFD_RELOC_64_PCREL
1659 BFD_RELOC_SPARC_PLT64
,
1660 BFD_RELOC_SPARC_HIX22
,
1661 BFD_RELOC_SPARC_LOX10
,
1662 BFD_RELOC_SPARC_H44
,
1663 BFD_RELOC_SPARC_M44
,
1664 BFD_RELOC_SPARC_L44
,
1665 BFD_RELOC_SPARC_REGISTER
,
1667 /* Alpha ECOFF and ELF relocations. Some of these treat the symbol or
1668 "addend" in some special way.
1669 For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
1670 writing; when reading, it will be the absolute section symbol. The
1671 addend is the displacement in bytes of the "lda" instruction from
1672 the "ldah" instruction (which is at the address of this reloc). */
1673 BFD_RELOC_ALPHA_GPDISP_HI16
,
1675 /* For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
1676 with GPDISP_HI16 relocs. The addend is ignored when writing the
1677 relocations out, and is filled in with the file's GP value on
1678 reading, for convenience. */
1679 BFD_RELOC_ALPHA_GPDISP_LO16
,
1681 /* The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
1682 relocation except that there is no accompanying GPDISP_LO16
1684 BFD_RELOC_ALPHA_GPDISP
,
1686 /* The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
1687 the assembler turns it into a LDQ instruction to load the address of
1688 the symbol, and then fills in a register in the real instruction.
1690 The LITERAL reloc, at the LDQ instruction, refers to the .lita
1691 section symbol. The addend is ignored when writing, but is filled
1692 in with the file's GP value on reading, for convenience, as with the
1695 The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
1696 It should refer to the symbol to be referenced, as with 16_GOTOFF,
1697 but it generates output not based on the position within the .got
1698 section, but relative to the GP value chosen for the file during the
1701 The LITUSE reloc, on the instruction using the loaded address, gives
1702 information to the linker that it might be able to use to optimize
1703 away some literal section references. The symbol is ignored (read
1704 as the absolute section symbol), and the "addend" indicates the type
1705 of instruction using the register:
1706 1 - "memory" fmt insn
1707 2 - byte-manipulation (byte offset reg)
1708 3 - jsr (target of branch)
1710 The GNU linker currently doesn't do any of this optimizing. */
1711 BFD_RELOC_ALPHA_LITERAL
,
1712 BFD_RELOC_ALPHA_ELF_LITERAL
,
1713 BFD_RELOC_ALPHA_LITUSE
,
1715 /* The HINT relocation indicates a value that should be filled into the
1716 "hint" field of a jmp/jsr/ret instruction, for possible branch-
1717 prediction logic which may be provided on some processors. */
1718 BFD_RELOC_ALPHA_HINT
,
1720 /* The LINKAGE relocation outputs a linkage pair in the object file,
1721 which is filled by the linker. */
1722 BFD_RELOC_ALPHA_LINKAGE
,
1724 /* The CODEADDR relocation outputs a STO_CA in the object file,
1725 which is filled by the linker. */
1726 BFD_RELOC_ALPHA_CODEADDR
,
1728 /* Bits 27..2 of the relocation address shifted right 2 bits;
1729 simple reloc otherwise. */
1732 /* The MIPS16 jump instruction. */
1733 BFD_RELOC_MIPS16_JMP
,
1735 /* MIPS16 GP relative reloc. */
1736 BFD_RELOC_MIPS16_GPREL
,
1738 /* High 16 bits of 32-bit value; simple reloc. */
1741 /* High 16 bits of 32-bit value but the low 16 bits will be sign
1742 extended and added to form the final result. If the low 16
1743 bits form a negative number, we need to add one to the high value
1744 to compensate for the borrow when the low bits are added. */
1750 /* Like BFD_RELOC_HI16_S, but PC relative. */
1751 BFD_RELOC_PCREL_HI16_S
,
1753 /* Like BFD_RELOC_LO16, but PC relative. */
1754 BFD_RELOC_PCREL_LO16
,
1756 /* Relocation relative to the global pointer. */
1757 #define BFD_RELOC_MIPS_GPREL BFD_RELOC_GPREL16
1759 /* Relocation against a MIPS literal section. */
1760 BFD_RELOC_MIPS_LITERAL
,
1762 /* MIPS ELF relocations. */
1763 BFD_RELOC_MIPS_GOT16
,
1764 BFD_RELOC_MIPS_CALL16
,
1765 #define BFD_RELOC_MIPS_GPREL32 BFD_RELOC_GPREL32
1766 BFD_RELOC_MIPS_GOT_HI16
,
1767 BFD_RELOC_MIPS_GOT_LO16
,
1768 BFD_RELOC_MIPS_CALL_HI16
,
1769 BFD_RELOC_MIPS_CALL_LO16
,
1771 /* i386/elf relocations */
1772 BFD_RELOC_386_GOT32
,
1773 BFD_RELOC_386_PLT32
,
1775 BFD_RELOC_386_GLOB_DAT
,
1776 BFD_RELOC_386_JUMP_SLOT
,
1777 BFD_RELOC_386_RELATIVE
,
1778 BFD_RELOC_386_GOTOFF
,
1779 BFD_RELOC_386_GOTPC
,
1781 /* ns32k relocations */
1782 BFD_RELOC_NS32K_IMM_8
,
1783 BFD_RELOC_NS32K_IMM_16
,
1784 BFD_RELOC_NS32K_IMM_32
,
1785 BFD_RELOC_NS32K_IMM_8_PCREL
,
1786 BFD_RELOC_NS32K_IMM_16_PCREL
,
1787 BFD_RELOC_NS32K_IMM_32_PCREL
,
1788 BFD_RELOC_NS32K_DISP_8
,
1789 BFD_RELOC_NS32K_DISP_16
,
1790 BFD_RELOC_NS32K_DISP_32
,
1791 BFD_RELOC_NS32K_DISP_8_PCREL
,
1792 BFD_RELOC_NS32K_DISP_16_PCREL
,
1793 BFD_RELOC_NS32K_DISP_32_PCREL
,
1795 /* Power(rs6000) and PowerPC relocations. */
1798 BFD_RELOC_PPC_TOC16
,
1800 BFD_RELOC_PPC_B16_BRTAKEN
,
1801 BFD_RELOC_PPC_B16_BRNTAKEN
,
1803 BFD_RELOC_PPC_BA16_BRTAKEN
,
1804 BFD_RELOC_PPC_BA16_BRNTAKEN
,
1806 BFD_RELOC_PPC_GLOB_DAT
,
1807 BFD_RELOC_PPC_JMP_SLOT
,
1808 BFD_RELOC_PPC_RELATIVE
,
1809 BFD_RELOC_PPC_LOCAL24PC
,
1810 BFD_RELOC_PPC_EMB_NADDR32
,
1811 BFD_RELOC_PPC_EMB_NADDR16
,
1812 BFD_RELOC_PPC_EMB_NADDR16_LO
,
1813 BFD_RELOC_PPC_EMB_NADDR16_HI
,
1814 BFD_RELOC_PPC_EMB_NADDR16_HA
,
1815 BFD_RELOC_PPC_EMB_SDAI16
,
1816 BFD_RELOC_PPC_EMB_SDA2I16
,
1817 BFD_RELOC_PPC_EMB_SDA2REL
,
1818 BFD_RELOC_PPC_EMB_SDA21
,
1819 BFD_RELOC_PPC_EMB_MRKREF
,
1820 BFD_RELOC_PPC_EMB_RELSEC16
,
1821 BFD_RELOC_PPC_EMB_RELST_LO
,
1822 BFD_RELOC_PPC_EMB_RELST_HI
,
1823 BFD_RELOC_PPC_EMB_RELST_HA
,
1824 BFD_RELOC_PPC_EMB_BIT_FLD
,
1825 BFD_RELOC_PPC_EMB_RELSDA
,
1827 /* The type of reloc used to build a contructor table - at the moment
1828 probably a 32 bit wide absolute relocation, but the target can choose.
1829 It generally does map to one of the other relocation types. */
1832 /* ARM 26 bit pc-relative branch. The lowest two bits must be zero and are
1833 not stored in the instruction. */
1834 BFD_RELOC_ARM_PCREL_BRANCH
,
1836 /* These relocs are only used within the ARM assembler. They are not
1837 (at present) written to any object files. */
1838 BFD_RELOC_ARM_IMMEDIATE
,
1839 BFD_RELOC_ARM_OFFSET_IMM
,
1840 BFD_RELOC_ARM_SHIFT_IMM
,
1842 BFD_RELOC_ARM_MULTI
,
1843 BFD_RELOC_ARM_CP_OFF_IMM
,
1844 BFD_RELOC_ARM_ADR_IMM
,
1845 BFD_RELOC_ARM_LDR_IMM
,
1846 BFD_RELOC_ARM_LITERAL
,
1847 BFD_RELOC_ARM_IN_POOL
,
1848 BFD_RELOC_ARM_OFFSET_IMM8
,
1849 BFD_RELOC_ARM_HWLITERAL
,
1850 BFD_RELOC_ARM_THUMB_ADD
,
1851 BFD_RELOC_ARM_THUMB_IMM
,
1852 BFD_RELOC_ARM_THUMB_SHIFT
,
1853 BFD_RELOC_ARM_THUMB_OFFSET
,
1855 /* Hitachi SH relocs. Not all of these appear in object files. */
1856 BFD_RELOC_SH_PCDISP8BY2
,
1857 BFD_RELOC_SH_PCDISP12BY2
,
1859 BFD_RELOC_SH_IMM4BY2
,
1860 BFD_RELOC_SH_IMM4BY4
,
1862 BFD_RELOC_SH_IMM8BY2
,
1863 BFD_RELOC_SH_IMM8BY4
,
1864 BFD_RELOC_SH_PCRELIMM8BY2
,
1865 BFD_RELOC_SH_PCRELIMM8BY4
,
1866 BFD_RELOC_SH_SWITCH16
,
1867 BFD_RELOC_SH_SWITCH32
,
1875 /* Thumb 23-, 12- and 9-bit pc-relative branches. The lowest bit must
1876 be zero and is not stored in the instruction. */
1877 BFD_RELOC_THUMB_PCREL_BRANCH9
,
1878 BFD_RELOC_THUMB_PCREL_BRANCH12
,
1879 BFD_RELOC_THUMB_PCREL_BRANCH23
,
1881 /* Argonaut RISC Core (ARC) relocs.
1882 ARC 22 bit pc-relative branch. The lowest two bits must be zero and are
1883 not stored in the instruction. The high 20 bits are installed in bits 26
1884 through 7 of the instruction. */
1885 BFD_RELOC_ARC_B22_PCREL
,
1887 /* ARC 26 bit absolute branch. The lowest two bits must be zero and are not
1888 stored in the instruction. The high 24 bits are installed in bits 23
1892 /* Mitsubishi D10V relocs.
1893 This is a 10-bit reloc with the right 2 bits
1895 BFD_RELOC_D10V_10_PCREL_R
,
1897 /* Mitsubishi D10V relocs.
1898 This is a 10-bit reloc with the right 2 bits
1899 assumed to be 0. This is the same as the previous reloc
1900 except it is in the left container, i.e.,
1901 shifted left 15 bits. */
1902 BFD_RELOC_D10V_10_PCREL_L
,
1904 /* This is an 18-bit reloc with the right 2 bits
1908 /* This is an 18-bit reloc with the right 2 bits
1910 BFD_RELOC_D10V_18_PCREL
,
1912 /* start-sanitize-d30v */
1914 /* Mitsubishi D30V relocs.
1915 This is a 6-bit absolute reloc. */
1918 /* This is a 6-bit pc-relative reloc with
1919 the right 3 bits assumed to be 0. */
1920 BFD_RELOC_D30V_9_PCREL
,
1922 /* This is a 6-bit pc-relative reloc with
1923 the right 3 bits assumed to be 0. Same
1924 as the previous reloc but on the right side
1925 of the container. */
1926 BFD_RELOC_D30V_9_PCREL_R
,
1928 /* This is a 12-bit absolute reloc with the
1929 right 3 bitsassumed to be 0. */
1932 /* This is a 12-bit pc-relative reloc with
1933 the right 3 bits assumed to be 0. */
1934 BFD_RELOC_D30V_15_PCREL
,
1936 /* This is a 12-bit pc-relative reloc with
1937 the right 3 bits assumed to be 0. Same
1938 as the previous reloc but on the right side
1939 of the container. */
1940 BFD_RELOC_D30V_15_PCREL_R
,
1942 /* This is an 18-bit absolute reloc with
1943 the right 3 bits assumed to be 0. */
1946 /* This is an 18-bit pc-relative reloc with
1947 the right 3 bits assumed to be 0. */
1948 BFD_RELOC_D30V_21_PCREL
,
1950 /* This is an 18-bit pc-relative reloc with
1951 the right 3 bits assumed to be 0. Same
1952 as the previous reloc but on the right side
1953 of the container. */
1954 BFD_RELOC_D30V_21_PCREL_R
,
1956 /* This is a 32-bit absolute reloc. */
1959 /* This is a 32-bit pc-relative reloc. */
1960 BFD_RELOC_D30V_32_PCREL
,
1961 /* end-sanitize-d30v */
1964 /* Mitsubishi M32R relocs.
1965 This is a 24 bit absolute address. */
1968 /* This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0. */
1969 BFD_RELOC_M32R_10_PCREL
,
1971 /* This is an 18-bit reloc with the right 2 bits assumed to be 0. */
1972 BFD_RELOC_M32R_18_PCREL
,
1974 /* This is a 26-bit reloc with the right 2 bits assumed to be 0. */
1975 BFD_RELOC_M32R_26_PCREL
,
1977 /* This is a 16-bit reloc containing the high 16 bits of an address
1978 used when the lower 16 bits are treated as unsigned. */
1979 BFD_RELOC_M32R_HI16_ULO
,
1981 /* This is a 16-bit reloc containing the high 16 bits of an address
1982 used when the lower 16 bits are treated as signed. */
1983 BFD_RELOC_M32R_HI16_SLO
,
1985 /* This is a 16-bit reloc containing the lower 16 bits of an address. */
1986 BFD_RELOC_M32R_LO16
,
1988 /* This is a 16-bit reloc containing the small data area offset for use in
1989 add3, load, and store instructions. */
1990 BFD_RELOC_M32R_SDA16
,
1992 /* This is a 9-bit reloc */
1993 BFD_RELOC_V850_9_PCREL
,
1995 /* This is a 22-bit reloc */
1996 BFD_RELOC_V850_22_PCREL
,
1998 /* This is a 16 bit offset from the short data area pointer. */
1999 BFD_RELOC_V850_SDA_16_16_OFFSET
,
2001 /* This is a 16 bit offset (of which only 15 bits are used) from the
2002 short data area pointer. */
2003 BFD_RELOC_V850_SDA_15_16_OFFSET
,
2005 /* This is a 16 bit offset from the zero data area pointer. */
2006 BFD_RELOC_V850_ZDA_16_16_OFFSET
,
2008 /* This is a 16 bit offset (of which only 15 bits are used) from the
2009 zero data area pointer. */
2010 BFD_RELOC_V850_ZDA_15_16_OFFSET
,
2012 /* This is an 8 bit offset (of which only 6 bits are used) from the
2013 tiny data area pointer. */
2014 BFD_RELOC_V850_TDA_6_8_OFFSET
,
2016 /* This is an 8bit offset (of which only 7 bits are used) from the tiny
2017 data area pointer. */
2018 BFD_RELOC_V850_TDA_7_8_OFFSET
,
2020 /* This is a 7 bit offset from the tiny data area pointer. */
2021 BFD_RELOC_V850_TDA_7_7_OFFSET
,
2023 /* This is a 16 bit offset from the tiny data area pointer. */
2024 BFD_RELOC_V850_TDA_16_16_OFFSET
,
2025 /* start-sanitize-v850e */
2027 /* This is a 5 bit offset (of which only 4 bits are used) from the tiny
2028 data area pointer. */
2029 BFD_RELOC_V850_TDA_4_5_OFFSET
,
2031 /* This is a 4 bit offset from the tiny data area pointer. */
2032 BFD_RELOC_V850_TDA_4_4_OFFSET
,
2034 /* This is a 16 bit offset from the short data area pointer, with the
2035 bits placed non-contigously in the instruction. */
2036 BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
,
2038 /* This is a 16 bit offset from the zero data area pointer, with the
2039 bits placed non-contigously in the instruction. */
2040 BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
,
2042 /* This is a 6 bit offset from the call table base pointer. */
2043 BFD_RELOC_V850_CALLT_6_7_OFFSET
,
2045 /* This is a 16 bit offset from the call table base pointer. */
2046 BFD_RELOC_V850_CALLT_16_16_OFFSET
,
2047 /* end-sanitize-v850e */
2050 /* This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
2052 BFD_RELOC_MN10300_32_PCREL
,
2054 /* This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
2056 BFD_RELOC_MN10300_16_PCREL
,
2057 /* start-sanitize-sky */
2059 /* SKY TXVU Relocations.
2060 This is an 11-bit pc relative reloc. The recorded address is for the
2061 lower instruction word. */
2062 BFD_RELOC_TXVU_11_PCREL
,
2063 /* end-sanitize-sky */
2066 typedef enum bfd_reloc_code_real bfd_reloc_code_real_type
;
2069 bfd_reloc_type_lookup
PARAMS ((bfd
*abfd
, bfd_reloc_code_real_type code
));
2072 bfd_get_reloc_code_name
PARAMS ((bfd_reloc_code_real_type code
));
2075 typedef struct symbol_cache_entry
2077 /* A pointer to the BFD which owns the symbol. This information
2078 is necessary so that a back end can work out what additional
2079 information (invisible to the application writer) is carried
2082 This field is *almost* redundant, since you can use section->owner
2083 instead, except that some symbols point to the global sections
2084 bfd_{abs,com,und}_section. This could be fixed by making
2085 these globals be per-bfd (or per-target-flavor). FIXME. */
2087 struct _bfd
*the_bfd
; /* Use bfd_asymbol_bfd(sym) to access this field. */
2089 /* The text of the symbol. The name is left alone, and not copied; the
2090 application may not alter it. */
2093 /* The value of the symbol. This really should be a union of a
2094 numeric value with a pointer, since some flags indicate that
2095 a pointer to another symbol is stored here. */
2098 /* Attributes of a symbol: */
2100 #define BSF_NO_FLAGS 0x00
2102 /* The symbol has local scope; <<static>> in <<C>>. The value
2103 is the offset into the section of the data. */
2104 #define BSF_LOCAL 0x01
2106 /* The symbol has global scope; initialized data in <<C>>. The
2107 value is the offset into the section of the data. */
2108 #define BSF_GLOBAL 0x02
2110 /* The symbol has global scope and is exported. The value is
2111 the offset into the section of the data. */
2112 #define BSF_EXPORT BSF_GLOBAL /* no real difference */
2114 /* A normal C symbol would be one of:
2115 <<BSF_LOCAL>>, <<BSF_FORT_COMM>>, <<BSF_UNDEFINED>> or
2118 /* The symbol is a debugging record. The value has an arbitary
2120 #define BSF_DEBUGGING 0x08
2122 /* The symbol denotes a function entry point. Used in ELF,
2123 perhaps others someday. */
2124 #define BSF_FUNCTION 0x10
2126 /* Used by the linker. */
2127 #define BSF_KEEP 0x20
2128 #define BSF_KEEP_G 0x40
2130 /* A weak global symbol, overridable without warnings by
2131 a regular global symbol of the same name. */
2132 #define BSF_WEAK 0x80
2134 /* This symbol was created to point to a section, e.g. ELF's
2135 STT_SECTION symbols. */
2136 #define BSF_SECTION_SYM 0x100
2138 /* The symbol used to be a common symbol, but now it is
2140 #define BSF_OLD_COMMON 0x200
2142 /* The default value for common data. */
2143 #define BFD_FORT_COMM_DEFAULT_VALUE 0
2145 /* In some files the type of a symbol sometimes alters its
2146 location in an output file - ie in coff a <<ISFCN>> symbol
2147 which is also <<C_EXT>> symbol appears where it was
2148 declared and not at the end of a section. This bit is set
2149 by the target BFD part to convey this information. */
2151 #define BSF_NOT_AT_END 0x400
2153 /* Signal that the symbol is the label of constructor section. */
2154 #define BSF_CONSTRUCTOR 0x800
2156 /* Signal that the symbol is a warning symbol. The name is a
2157 warning. The name of the next symbol is the one to warn about;
2158 if a reference is made to a symbol with the same name as the next
2159 symbol, a warning is issued by the linker. */
2160 #define BSF_WARNING 0x1000
2162 /* Signal that the symbol is indirect. This symbol is an indirect
2163 pointer to the symbol with the same name as the next symbol. */
2164 #define BSF_INDIRECT 0x2000
2166 /* BSF_FILE marks symbols that contain a file name. This is used
2167 for ELF STT_FILE symbols. */
2168 #define BSF_FILE 0x4000
2170 /* Symbol is from dynamic linking information. */
2171 #define BSF_DYNAMIC 0x8000
2173 /* The symbol denotes a data object. Used in ELF, and perhaps
2175 #define BSF_OBJECT 0x10000
2179 /* A pointer to the section to which this symbol is
2180 relative. This will always be non NULL, there are special
2181 sections for undefined and absolute symbols. */
2182 struct sec
*section
;
2184 /* Back end special data. */
2192 #define bfd_get_symtab_upper_bound(abfd) \
2193 BFD_SEND (abfd, _bfd_get_symtab_upper_bound, (abfd))
2195 bfd_is_local_label
PARAMS ((bfd
*abfd
, asymbol
*sym
));
2198 bfd_is_local_label_name
PARAMS ((bfd
*abfd
, const char *name
));
2200 #define bfd_is_local_label_name(abfd, name) \
2201 BFD_SEND (abfd, _bfd_is_local_label_name, (abfd, name))
2202 #define bfd_canonicalize_symtab(abfd, location) \
2203 BFD_SEND (abfd, _bfd_canonicalize_symtab,\
2206 bfd_set_symtab
PARAMS ((bfd
*abfd
, asymbol
**location
, unsigned int count
));
2209 bfd_print_symbol_vandf
PARAMS ((PTR file
, asymbol
*symbol
));
2211 #define bfd_make_empty_symbol(abfd) \
2212 BFD_SEND (abfd, _bfd_make_empty_symbol, (abfd))
2213 #define bfd_make_debug_symbol(abfd,ptr,size) \
2214 BFD_SEND (abfd, _bfd_make_debug_symbol, (abfd, ptr, size))
2216 bfd_decode_symclass
PARAMS ((asymbol
*symbol
));
2219 bfd_symbol_info
PARAMS ((asymbol
*symbol
, symbol_info
*ret
));
2222 bfd_copy_private_symbol_data
PARAMS ((bfd
*ibfd
, asymbol
*isym
, bfd
*obfd
, asymbol
*osym
));
2224 #define bfd_copy_private_symbol_data(ibfd, isymbol, obfd, osymbol) \
2225 BFD_SEND (obfd, _bfd_copy_private_symbol_data, \
2226 (ibfd, isymbol, obfd, osymbol))
2229 /* The filename the application opened the BFD with. */
2230 CONST
char *filename
;
2232 /* A pointer to the target jump table. */
2233 const struct bfd_target
*xvec
;
2235 /* To avoid dragging too many header files into every file that
2236 includes `<<bfd.h>>', IOSTREAM has been declared as a "char
2237 *", and MTIME as a "long". Their correct types, to which they
2238 are cast when used, are "FILE *" and "time_t". The iostream
2239 is the result of an fopen on the filename. However, if the
2240 BFD_IN_MEMORY flag is set, then iostream is actually a pointer
2241 to a bfd_in_memory struct. */
2244 /* Is the file descriptor being cached? That is, can it be closed as
2245 needed, and re-opened when accessed later? */
2249 /* Marks whether there was a default target specified when the
2250 BFD was opened. This is used to select which matching algorithm
2251 to use to choose the back end. */
2253 boolean target_defaulted
;
2255 /* The caching routines use these to maintain a
2256 least-recently-used list of BFDs */
2258 struct _bfd
*lru_prev
, *lru_next
;
2260 /* When a file is closed by the caching routines, BFD retains
2261 state information on the file here: */
2265 /* and here: (``once'' means at least once) */
2267 boolean opened_once
;
2269 /* Set if we have a locally maintained mtime value, rather than
2270 getting it from the file each time: */
2274 /* File modified time, if mtime_set is true: */
2278 /* Reserved for an unimplemented file locking extension.*/
2282 /* The format which belongs to the BFD. (object, core, etc.) */
2286 /* The direction the BFD was opened with*/
2288 enum bfd_direction
{no_direction
= 0,
2290 write_direction
= 2,
2291 both_direction
= 3} direction
;
2293 /* Format_specific flags*/
2297 /* Currently my_archive is tested before adding origin to
2298 anything. I believe that this can become always an add of
2299 origin, with origin set to 0 for non archive files. */
2303 /* Remember when output has begun, to stop strange things
2305 boolean output_has_begun
;
2307 /* Pointer to linked list of sections*/
2308 struct sec
*sections
;
2310 /* The number of sections */
2311 unsigned int section_count
;
2313 /* Stuff only useful for object files:
2314 The start address. */
2315 bfd_vma start_address
;
2317 /* Used for input and output*/
2318 unsigned int symcount
;
2320 /* Symbol table for output BFD (with symcount entries) */
2321 struct symbol_cache_entry
**outsymbols
;
2323 /* Pointer to structure which contains architecture information*/
2324 const struct bfd_arch_info
*arch_info
;
2326 /* Stuff only useful for archives:*/
2328 struct _bfd
*my_archive
; /* The containing archive BFD. */
2329 struct _bfd
*next
; /* The next BFD in the archive. */
2330 struct _bfd
*archive_head
; /* The first BFD in the archive. */
2333 /* A chain of BFD structures involved in a link. */
2334 struct _bfd
*link_next
;
2336 /* A field used by _bfd_generic_link_add_archive_symbols. This will
2337 be used only for archive elements. */
2340 /* Used by the back end to hold private data. */
2344 struct aout_data_struct
*aout_data
;
2345 struct artdata
*aout_ar_data
;
2346 struct _oasys_data
*oasys_obj_data
;
2347 struct _oasys_ar_data
*oasys_ar_data
;
2348 struct coff_tdata
*coff_obj_data
;
2349 struct pe_tdata
*pe_obj_data
;
2350 struct xcoff_tdata
*xcoff_obj_data
;
2351 struct ecoff_tdata
*ecoff_obj_data
;
2352 struct ieee_data_struct
*ieee_data
;
2353 struct ieee_ar_data_struct
*ieee_ar_data
;
2354 struct srec_data_struct
*srec_data
;
2355 struct ihex_data_struct
*ihex_data
;
2356 struct tekhex_data_struct
*tekhex_data
;
2357 struct elf_obj_tdata
*elf_obj_data
;
2358 struct nlm_obj_tdata
*nlm_obj_data
;
2359 struct bout_data_struct
*bout_data
;
2360 struct sun_core_struct
*sun_core_data
;
2361 struct trad_core_struct
*trad_core_data
;
2362 struct som_data_struct
*som_data
;
2363 struct hpux_core_struct
*hpux_core_data
;
2364 struct hppabsd_core_struct
*hppabsd_core_data
;
2365 struct sgi_core_struct
*sgi_core_data
;
2366 struct lynx_core_struct
*lynx_core_data
;
2367 struct osf_core_struct
*osf_core_data
;
2368 struct cisco_core_struct
*cisco_core_data
;
2369 struct versados_data_struct
*versados_data
;
2370 struct netbsd_core_struct
*netbsd_core_data
;
2374 /* Used by the application to hold private data*/
2377 /* Where all the allocated stuff under this BFD goes. This is a
2378 struct objalloc *, but we use PTR to avoid requiring the inclusion of
2383 typedef enum bfd_error
2385 bfd_error_no_error
= 0,
2386 bfd_error_system_call
,
2387 bfd_error_invalid_target
,
2388 bfd_error_wrong_format
,
2389 bfd_error_invalid_operation
,
2390 bfd_error_no_memory
,
2391 bfd_error_no_symbols
,
2393 bfd_error_no_more_archived_files
,
2394 bfd_error_malformed_archive
,
2395 bfd_error_file_not_recognized
,
2396 bfd_error_file_ambiguously_recognized
,
2397 bfd_error_no_contents
,
2398 bfd_error_nonrepresentable_section
,
2399 bfd_error_no_debug_section
,
2400 bfd_error_bad_value
,
2401 bfd_error_file_truncated
,
2402 bfd_error_file_too_big
,
2403 bfd_error_invalid_error_code
2407 bfd_get_error
PARAMS ((void));
2410 bfd_set_error
PARAMS ((bfd_error_type error_tag
));
2413 bfd_errmsg
PARAMS ((bfd_error_type error_tag
));
2416 bfd_perror
PARAMS ((CONST
char *message
));
2418 typedef void (*bfd_error_handler_type
) PARAMS ((const char *, ...));
2420 bfd_error_handler_type
2421 bfd_set_error_handler
PARAMS ((bfd_error_handler_type
));
2424 bfd_set_error_program_name
PARAMS ((const char *));
2426 bfd_error_handler_type
2427 bfd_get_error_handler
PARAMS ((void));
2430 bfd_get_reloc_upper_bound
PARAMS ((bfd
*abfd
, asection
*sect
));
2433 bfd_canonicalize_reloc
2441 PARAMS ((bfd
*abfd
, asection
*sec
, arelent
**rel
, unsigned int count
)
2446 bfd_set_file_flags
PARAMS ((bfd
*abfd
, flagword flags
));
2449 bfd_set_start_address
PARAMS ((bfd
*abfd
, bfd_vma vma
));
2452 bfd_get_mtime
PARAMS ((bfd
*abfd
));
2455 bfd_get_size
PARAMS ((bfd
*abfd
));
2458 bfd_get_gp_size
PARAMS ((bfd
*abfd
));
2461 bfd_set_gp_size
PARAMS ((bfd
*abfd
, int i
));
2464 bfd_scan_vma
PARAMS ((CONST
char *string
, CONST
char **end
, int base
));
2467 bfd_copy_private_bfd_data
PARAMS ((bfd
*ibfd
, bfd
*obfd
));
2469 #define bfd_copy_private_bfd_data(ibfd, obfd) \
2470 BFD_SEND (obfd, _bfd_copy_private_bfd_data, \
2473 bfd_merge_private_bfd_data
PARAMS ((bfd
*ibfd
, bfd
*obfd
));
2475 #define bfd_merge_private_bfd_data(ibfd, obfd) \
2476 BFD_SEND (obfd, _bfd_merge_private_bfd_data, \
2479 bfd_set_private_flags
PARAMS ((bfd
*abfd
, flagword flags
));
2481 #define bfd_set_private_flags(abfd, flags) \
2482 BFD_SEND (abfd, _bfd_set_private_flags, \
2484 #define bfd_sizeof_headers(abfd, reloc) \
2485 BFD_SEND (abfd, _bfd_sizeof_headers, (abfd, reloc))
2487 #define bfd_find_nearest_line(abfd, sec, syms, off, file, func, line) \
2488 BFD_SEND (abfd, _bfd_find_nearest_line, (abfd, sec, syms, off, file, func, line))
2490 /* Do these three do anything useful at all, for any back end? */
2491 #define bfd_debug_info_start(abfd) \
2492 BFD_SEND (abfd, _bfd_debug_info_start, (abfd))
2494 #define bfd_debug_info_end(abfd) \
2495 BFD_SEND (abfd, _bfd_debug_info_end, (abfd))
2497 #define bfd_debug_info_accumulate(abfd, section) \
2498 BFD_SEND (abfd, _bfd_debug_info_accumulate, (abfd, section))
2501 #define bfd_stat_arch_elt(abfd, stat) \
2502 BFD_SEND (abfd, _bfd_stat_arch_elt,(abfd, stat))
2504 #define bfd_update_armap_timestamp(abfd) \
2505 BFD_SEND (abfd, _bfd_update_armap_timestamp, (abfd))
2507 #define bfd_set_arch_mach(abfd, arch, mach)\
2508 BFD_SEND ( abfd, _bfd_set_arch_mach, (abfd, arch, mach))
2510 #define bfd_relax_section(abfd, section, link_info, again) \
2511 BFD_SEND (abfd, _bfd_relax_section, (abfd, section, link_info, again))
2513 #define bfd_link_hash_table_create(abfd) \
2514 BFD_SEND (abfd, _bfd_link_hash_table_create, (abfd))
2516 #define bfd_link_add_symbols(abfd, info) \
2517 BFD_SEND (abfd, _bfd_link_add_symbols, (abfd, info))
2519 #define bfd_final_link(abfd, info) \
2520 BFD_SEND (abfd, _bfd_final_link, (abfd, info))
2522 #define bfd_free_cached_info(abfd) \
2523 BFD_SEND (abfd, _bfd_free_cached_info, (abfd))
2525 #define bfd_get_dynamic_symtab_upper_bound(abfd) \
2526 BFD_SEND (abfd, _bfd_get_dynamic_symtab_upper_bound, (abfd))
2528 #define bfd_print_private_bfd_data(abfd, file)\
2529 BFD_SEND (abfd, _bfd_print_private_bfd_data, (abfd, file))
2531 #define bfd_canonicalize_dynamic_symtab(abfd, asymbols) \
2532 BFD_SEND (abfd, _bfd_canonicalize_dynamic_symtab, (abfd, asymbols))
2534 #define bfd_get_dynamic_reloc_upper_bound(abfd) \
2535 BFD_SEND (abfd, _bfd_get_dynamic_reloc_upper_bound, (abfd))
2537 #define bfd_canonicalize_dynamic_reloc(abfd, arels, asyms) \
2538 BFD_SEND (abfd, _bfd_canonicalize_dynamic_reloc, (abfd, arels, asyms))
2540 extern bfd_byte
*bfd_get_relocated_section_contents
2541 PARAMS ((bfd
*, struct bfd_link_info
*,
2542 struct bfd_link_order
*, bfd_byte
*,
2543 boolean
, asymbol
**));
2546 bfd_get_next_mapent
PARAMS ((bfd
*abfd
, symindex previous
, carsym
**sym
));
2549 bfd_set_archive_head
PARAMS ((bfd
*output
, bfd
*new_head
));
2552 bfd_openr_next_archived_file
PARAMS ((bfd
*archive
, bfd
*previous
));
2555 bfd_core_file_failing_command
PARAMS ((bfd
*abfd
));
2558 bfd_core_file_failing_signal
PARAMS ((bfd
*abfd
));
2561 core_file_matches_executable_p
2562 PARAMS ((bfd
*core_bfd
, bfd
*exec_bfd
));
2564 #define BFD_SEND(bfd, message, arglist) \
2565 ((*((bfd)->xvec->message)) arglist)
2567 #ifdef DEBUG_BFD_SEND
2569 #define BFD_SEND(bfd, message, arglist) \
2570 (((bfd) && (bfd)->xvec && (bfd)->xvec->message) ? \
2571 ((*((bfd)->xvec->message)) arglist) : \
2572 (bfd_assert (__FILE__,__LINE__), NULL))
2574 #define BFD_SEND_FMT(bfd, message, arglist) \
2575 (((bfd)->xvec->message[(int)((bfd)->format)]) arglist)
2577 #ifdef DEBUG_BFD_SEND
2579 #define BFD_SEND_FMT(bfd, message, arglist) \
2580 (((bfd) && (bfd)->xvec && (bfd)->xvec->message) ? \
2581 (((bfd)->xvec->message[(int)((bfd)->format)]) arglist) : \
2582 (bfd_assert (__FILE__,__LINE__), NULL))
2585 bfd_target_unknown_flavour
,
2586 bfd_target_aout_flavour
,
2587 bfd_target_coff_flavour
,
2588 bfd_target_ecoff_flavour
,
2589 bfd_target_elf_flavour
,
2590 bfd_target_ieee_flavour
,
2591 bfd_target_nlm_flavour
,
2592 bfd_target_oasys_flavour
,
2593 bfd_target_tekhex_flavour
,
2594 bfd_target_srec_flavour
,
2595 bfd_target_ihex_flavour
,
2596 bfd_target_som_flavour
,
2597 bfd_target_os9k_flavour
,
2598 bfd_target_versados_flavour
,
2599 bfd_target_msdos_flavour
,
2600 bfd_target_evax_flavour
2603 enum bfd_endian
{ BFD_ENDIAN_BIG
, BFD_ENDIAN_LITTLE
, BFD_ENDIAN_UNKNOWN
};
2605 /* Forward declaration. */
2606 typedef struct bfd_link_info _bfd_link_info
;
2608 typedef struct bfd_target
2611 enum bfd_flavour flavour
;
2612 enum bfd_endian byteorder
;
2613 enum bfd_endian header_byteorder
;
2614 flagword object_flags
;
2615 flagword section_flags
;
2616 char symbol_leading_char
;
2618 unsigned short ar_max_namelen
;
2619 bfd_vma (*bfd_getx64
) PARAMS ((const bfd_byte
*));
2620 bfd_signed_vma (*bfd_getx_signed_64
) PARAMS ((const bfd_byte
*));
2621 void (*bfd_putx64
) PARAMS ((bfd_vma
, bfd_byte
*));
2622 bfd_vma (*bfd_getx32
) PARAMS ((const bfd_byte
*));
2623 bfd_signed_vma (*bfd_getx_signed_32
) PARAMS ((const bfd_byte
*));
2624 void (*bfd_putx32
) PARAMS ((bfd_vma
, bfd_byte
*));
2625 bfd_vma (*bfd_getx16
) PARAMS ((const bfd_byte
*));
2626 bfd_signed_vma (*bfd_getx_signed_16
) PARAMS ((const bfd_byte
*));
2627 void (*bfd_putx16
) PARAMS ((bfd_vma
, bfd_byte
*));
2628 bfd_vma (*bfd_h_getx64
) PARAMS ((const bfd_byte
*));
2629 bfd_signed_vma (*bfd_h_getx_signed_64
) PARAMS ((const bfd_byte
*));
2630 void (*bfd_h_putx64
) PARAMS ((bfd_vma
, bfd_byte
*));
2631 bfd_vma (*bfd_h_getx32
) PARAMS ((const bfd_byte
*));
2632 bfd_signed_vma (*bfd_h_getx_signed_32
) PARAMS ((const bfd_byte
*));
2633 void (*bfd_h_putx32
) PARAMS ((bfd_vma
, bfd_byte
*));
2634 bfd_vma (*bfd_h_getx16
) PARAMS ((const bfd_byte
*));
2635 bfd_signed_vma (*bfd_h_getx_signed_16
) PARAMS ((const bfd_byte
*));
2636 void (*bfd_h_putx16
) PARAMS ((bfd_vma
, bfd_byte
*));
2637 const struct bfd_target
*(*_bfd_check_format
[bfd_type_end
]) PARAMS ((bfd
*));
2638 boolean (*_bfd_set_format
[bfd_type_end
]) PARAMS ((bfd
*));
2639 boolean (*_bfd_write_contents
[bfd_type_end
]) PARAMS ((bfd
*));
2641 /* Generic entry points. */
2642 #define BFD_JUMP_TABLE_GENERIC(NAME)\
2643 CAT(NAME,_close_and_cleanup),\
2644 CAT(NAME,_bfd_free_cached_info),\
2645 CAT(NAME,_new_section_hook),\
2646 CAT(NAME,_get_section_contents),\
2647 CAT(NAME,_get_section_contents_in_window)
2649 /* Called when the BFD is being closed to do any necessary cleanup. */
2650 boolean (*_close_and_cleanup
) PARAMS ((bfd
*));
2651 /* Ask the BFD to free all cached information. */
2652 boolean (*_bfd_free_cached_info
) PARAMS ((bfd
*));
2653 /* Called when a new section is created. */
2654 boolean (*_new_section_hook
) PARAMS ((bfd
*, sec_ptr
));
2655 /* Read the contents of a section. */
2656 boolean (*_bfd_get_section_contents
) PARAMS ((bfd
*, sec_ptr
, PTR
,
2657 file_ptr
, bfd_size_type
));
2658 boolean (*_bfd_get_section_contents_in_window
)
2659 PARAMS ((bfd
*, sec_ptr
, bfd_window
*,
2660 file_ptr
, bfd_size_type
));
2662 /* Entry points to copy private data. */
2663 #define BFD_JUMP_TABLE_COPY(NAME)\
2664 CAT(NAME,_bfd_copy_private_bfd_data),\
2665 CAT(NAME,_bfd_merge_private_bfd_data),\
2666 CAT(NAME,_bfd_copy_private_section_data),\
2667 CAT(NAME,_bfd_copy_private_symbol_data),\
2668 CAT(NAME,_bfd_set_private_flags),\
2669 CAT(NAME,_bfd_print_private_bfd_data)\
2670 /* Called to copy BFD general private data from one object file
2672 boolean (*_bfd_copy_private_bfd_data
) PARAMS ((bfd
*, bfd
*));
2673 /* Called to merge BFD general private data from one object file
2674 to a common output file when linking. */
2675 boolean (*_bfd_merge_private_bfd_data
) PARAMS ((bfd
*, bfd
*));
2676 /* Called to copy BFD private section data from one object file
2678 boolean (*_bfd_copy_private_section_data
) PARAMS ((bfd
*, sec_ptr
,
2680 /* Called to copy BFD private symbol data from one symbol
2682 boolean (*_bfd_copy_private_symbol_data
) PARAMS ((bfd
*, asymbol
*,
2684 /* Called to set private backend flags */
2685 boolean (*_bfd_set_private_flags
) PARAMS ((bfd
*, flagword
));
2687 /* Called to print private BFD data */
2688 boolean (*_bfd_print_private_bfd_data
) PARAMS ((bfd
*, PTR
));
2690 /* Core file entry points. */
2691 #define BFD_JUMP_TABLE_CORE(NAME)\
2692 CAT(NAME,_core_file_failing_command),\
2693 CAT(NAME,_core_file_failing_signal),\
2694 CAT(NAME,_core_file_matches_executable_p)
2695 char * (*_core_file_failing_command
) PARAMS ((bfd
*));
2696 int (*_core_file_failing_signal
) PARAMS ((bfd
*));
2697 boolean (*_core_file_matches_executable_p
) PARAMS ((bfd
*, bfd
*));
2699 /* Archive entry points. */
2700 #define BFD_JUMP_TABLE_ARCHIVE(NAME)\
2701 CAT(NAME,_slurp_armap),\
2702 CAT(NAME,_slurp_extended_name_table),\
2703 CAT(NAME,_construct_extended_name_table),\
2704 CAT(NAME,_truncate_arname),\
2705 CAT(NAME,_write_armap),\
2706 CAT(NAME,_read_ar_hdr),\
2707 CAT(NAME,_openr_next_archived_file),\
2708 CAT(NAME,_get_elt_at_index),\
2709 CAT(NAME,_generic_stat_arch_elt),\
2710 CAT(NAME,_update_armap_timestamp)
2711 boolean (*_bfd_slurp_armap
) PARAMS ((bfd
*));
2712 boolean (*_bfd_slurp_extended_name_table
) PARAMS ((bfd
*));
2713 boolean (*_bfd_construct_extended_name_table
)
2714 PARAMS ((bfd
*, char **, bfd_size_type
*, const char **));
2715 void (*_bfd_truncate_arname
) PARAMS ((bfd
*, CONST
char *, char *));
2716 boolean (*write_armap
) PARAMS ((bfd
*arch
,
2717 unsigned int elength
,
2719 unsigned int orl_count
,
2721 PTR (*_bfd_read_ar_hdr_fn
) PARAMS ((bfd
*));
2722 bfd
* (*openr_next_archived_file
) PARAMS ((bfd
*arch
, bfd
*prev
));
2723 #define bfd_get_elt_at_index(b,i) BFD_SEND(b, _bfd_get_elt_at_index, (b,i))
2724 bfd
* (*_bfd_get_elt_at_index
) PARAMS ((bfd
*, symindex
));
2725 int (*_bfd_stat_arch_elt
) PARAMS ((bfd
*, struct stat
*));
2726 boolean (*_bfd_update_armap_timestamp
) PARAMS ((bfd
*));
2728 /* Entry points used for symbols. */
2729 #define BFD_JUMP_TABLE_SYMBOLS(NAME)\
2730 CAT(NAME,_get_symtab_upper_bound),\
2731 CAT(NAME,_get_symtab),\
2732 CAT(NAME,_make_empty_symbol),\
2733 CAT(NAME,_print_symbol),\
2734 CAT(NAME,_get_symbol_info),\
2735 CAT(NAME,_bfd_is_local_label_name),\
2736 CAT(NAME,_get_lineno),\
2737 CAT(NAME,_find_nearest_line),\
2738 CAT(NAME,_bfd_make_debug_symbol),\
2739 CAT(NAME,_read_minisymbols),\
2740 CAT(NAME,_minisymbol_to_symbol)
2741 long (*_bfd_get_symtab_upper_bound
) PARAMS ((bfd
*));
2742 long (*_bfd_canonicalize_symtab
) PARAMS ((bfd
*,
2743 struct symbol_cache_entry
**));
2744 struct symbol_cache_entry
*
2745 (*_bfd_make_empty_symbol
) PARAMS ((bfd
*));
2746 void (*_bfd_print_symbol
) PARAMS ((bfd
*, PTR
,
2747 struct symbol_cache_entry
*,
2748 bfd_print_symbol_type
));
2749 #define bfd_print_symbol(b,p,s,e) BFD_SEND(b, _bfd_print_symbol, (b,p,s,e))
2750 void (*_bfd_get_symbol_info
) PARAMS ((bfd
*,
2751 struct symbol_cache_entry
*,
2753 #define bfd_get_symbol_info(b,p,e) BFD_SEND(b, _bfd_get_symbol_info, (b,p,e))
2754 boolean (*_bfd_is_local_label_name
) PARAMS ((bfd
*, const char *));
2756 alent
* (*_get_lineno
) PARAMS ((bfd
*, struct symbol_cache_entry
*));
2757 boolean (*_bfd_find_nearest_line
) PARAMS ((bfd
*abfd
,
2758 struct sec
*section
, struct symbol_cache_entry
**symbols
,
2759 bfd_vma offset
, CONST
char **file
, CONST
char **func
,
2760 unsigned int *line
));
2761 /* Back-door to allow format-aware applications to create debug symbols
2762 while using BFD for everything else. Currently used by the assembler
2763 when creating COFF files. */
2764 asymbol
* (*_bfd_make_debug_symbol
) PARAMS ((
2767 unsigned long size
));
2768 #define bfd_read_minisymbols(b, d, m, s) \
2769 BFD_SEND (b, _read_minisymbols, (b, d, m, s))
2770 long (*_read_minisymbols
) PARAMS ((bfd
*, boolean
, PTR
*,
2772 #define bfd_minisymbol_to_symbol(b, d, m, f) \
2773 BFD_SEND (b, _minisymbol_to_symbol, (b, d, m, f))
2774 asymbol
*(*_minisymbol_to_symbol
) PARAMS ((bfd
*, boolean
, const PTR
,
2777 /* Routines for relocs. */
2778 #define BFD_JUMP_TABLE_RELOCS(NAME)\
2779 CAT(NAME,_get_reloc_upper_bound),\
2780 CAT(NAME,_canonicalize_reloc),\
2781 CAT(NAME,_bfd_reloc_type_lookup)
2782 long (*_get_reloc_upper_bound
) PARAMS ((bfd
*, sec_ptr
));
2783 long (*_bfd_canonicalize_reloc
) PARAMS ((bfd
*, sec_ptr
, arelent
**,
2784 struct symbol_cache_entry
**));
2785 /* See documentation on reloc types. */
2787 (*reloc_type_lookup
) PARAMS ((bfd
*abfd
,
2788 bfd_reloc_code_real_type code
));
2790 /* Routines used when writing an object file. */
2791 #define BFD_JUMP_TABLE_WRITE(NAME)\
2792 CAT(NAME,_set_arch_mach),\
2793 CAT(NAME,_set_section_contents)
2794 boolean (*_bfd_set_arch_mach
) PARAMS ((bfd
*, enum bfd_architecture
,
2796 boolean (*_bfd_set_section_contents
) PARAMS ((bfd
*, sec_ptr
, PTR
,
2797 file_ptr
, bfd_size_type
));
2799 /* Routines used by the linker. */
2800 #define BFD_JUMP_TABLE_LINK(NAME)\
2801 CAT(NAME,_sizeof_headers),\
2802 CAT(NAME,_bfd_get_relocated_section_contents),\
2803 CAT(NAME,_bfd_relax_section),\
2804 CAT(NAME,_bfd_link_hash_table_create),\
2805 CAT(NAME,_bfd_link_add_symbols),\
2806 CAT(NAME,_bfd_final_link),\
2807 CAT(NAME,_bfd_link_split_section)
2808 int (*_bfd_sizeof_headers
) PARAMS ((bfd
*, boolean
));
2809 bfd_byte
* (*_bfd_get_relocated_section_contents
) PARAMS ((bfd
*,
2810 struct bfd_link_info
*, struct bfd_link_order
*,
2811 bfd_byte
*data
, boolean relocateable
,
2812 struct symbol_cache_entry
**));
2814 boolean (*_bfd_relax_section
) PARAMS ((bfd
*, struct sec
*,
2815 struct bfd_link_info
*, boolean
*again
));
2817 /* Create a hash table for the linker. Different backends store
2818 different information in this table. */
2819 struct bfd_link_hash_table
*(*_bfd_link_hash_table_create
) PARAMS ((bfd
*));
2821 /* Add symbols from this object file into the hash table. */
2822 boolean (*_bfd_link_add_symbols
) PARAMS ((bfd
*, struct bfd_link_info
*));
2824 /* Do a link based on the link_order structures attached to each
2825 section of the BFD. */
2826 boolean (*_bfd_final_link
) PARAMS ((bfd
*, struct bfd_link_info
*));
2828 /* Should this section be split up into smaller pieces during linking. */
2829 boolean (*_bfd_link_split_section
) PARAMS ((bfd
*, struct sec
*));
2831 /* Routines to handle dynamic symbols and relocs. */
2832 #define BFD_JUMP_TABLE_DYNAMIC(NAME)\
2833 CAT(NAME,_get_dynamic_symtab_upper_bound),\
2834 CAT(NAME,_canonicalize_dynamic_symtab),\
2835 CAT(NAME,_get_dynamic_reloc_upper_bound),\
2836 CAT(NAME,_canonicalize_dynamic_reloc)
2837 /* Get the amount of memory required to hold the dynamic symbols. */
2838 long (*_bfd_get_dynamic_symtab_upper_bound
) PARAMS ((bfd
*));
2839 /* Read in the dynamic symbols. */
2840 long (*_bfd_canonicalize_dynamic_symtab
)
2841 PARAMS ((bfd
*, struct symbol_cache_entry
**));
2842 /* Get the amount of memory required to hold the dynamic relocs. */
2843 long (*_bfd_get_dynamic_reloc_upper_bound
) PARAMS ((bfd
*));
2844 /* Read in the dynamic relocs. */
2845 long (*_bfd_canonicalize_dynamic_reloc
)
2846 PARAMS ((bfd
*, arelent
**, struct symbol_cache_entry
**));
2851 bfd_set_default_target
PARAMS ((const char *name
));
2854 bfd_find_target
PARAMS ((CONST
char *target_name
, bfd
*abfd
));
2857 bfd_target_list
PARAMS ((void));
2860 bfd_check_format
PARAMS ((bfd
*abfd
, bfd_format format
));
2863 bfd_check_format_matches
PARAMS ((bfd
*abfd
, bfd_format format
, char ***matching
));
2866 bfd_set_format
PARAMS ((bfd
*abfd
, bfd_format format
));
2869 bfd_format_string
PARAMS ((bfd_format format
));