2 # Please do not edit this file. It is generated automatically from
3 # configure.in and a configure template.
8 # Configuration script template
9 # Copyright (C) 1988, 1990, 1991 Free Software Foundation, Inc.
11 #This file is part of GNU.
13 #GNU CC is free software; you can redistribute it and/or modify
14 #it under the terms of the GNU General Public License as published by
15 #the Free Software Foundation; either version 1, or (at your option)
18 #GNU CC is distributed in the hope that it will be useful,
19 #but WITHOUT ANY WARRANTY; without even the implied warranty of
20 #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 #GNU General Public License for more details.
23 #You should have received a copy of the GNU General Public License
24 #along with GNU CC; see the file COPYING. If not, write to
25 #the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
30 # Shell script to create proper links to machine-dependent files in
31 # preparation for compilation.
33 # If configure succeeds, it leaves its status in config.status.
34 # If configure fails after disturbing the status quo,
35 # config.status is removed.
45 #symbolic_link="echo ln -s"
47 # clear some things potentially inherited from environment.
69 -destdir=* |
+destdir
=* |
+destdi
=* |
+destd
=* |
+dest
=* |
+des
=* |
+de
=* |
+d
=*)
70 destdir
=`echo ${arg} | sed 's/[+-]d[a-z]*=//'`
72 -forcesubdirs |
+forcesubdirs |
+f
)
75 -languages=* |
+languages
=* |
+language
=* |
+languag
=* \
76 |
+langua
=* |
+langu
=* |
+lang
=* |
+lan
=* |
+la
=* \
78 languages
="${languages} `echo ${arg} | sed 's/[+-]l[a-z]*=//'`"
80 -gas |
+gas |
+ga |
+g
)
86 -nfp |
+nfp |
+nf |
+n
)
89 -norecurse |
+norecurse
)
95 # -srcdir=* | +srcdir=* | +srcdi=* | +srcd=* | +src=* | +sr=* | +s=*)
96 # srcdir=`echo ${arg} | sed 's/[+-]s[a-z]*=//'`
98 -target=* |
+target
=* |
+targe
=* |
+targ
=* |
+tar=* |
+ta
=* |
+t
=*)
99 if [ -n "${targets}" ] ; then
100 forcesubdirs
="+forcesubdirs"
103 newtargets
="${targets} `echo ${arg} | sed 's/[+-]t[a-z]*=//'`"
104 targets
="${newtargets}"
106 -template=* |
+template
=*)
107 template
=`echo ${arg} | sed 's/[+-]template=//'`
109 +verbose |
+verbos |
+verbo |
+verb |
+ver |
+ve |
+v
)
114 echo "Unrecognized option: \"${arg}\"".
;
119 if [ -n "${hosts}" ] ; then
120 forcesubdirs
="+forcesubdirs"
123 newhosts
="${hosts} ${arg}"
129 if [ -n "${verbose}" ] ; then
130 echo `pwd`/configure $
*
131 echo targets
=\"${targets}\"
134 # process host and target only if not rebuilding configure itself or removing.
135 if [ -z "${template}" -a -z "${removing}" -a -z "${fatal}" ] ; then
136 # Complain if an arg is missing
137 if [ -z "${hosts}" ] ; then
139 echo "configure: No HOST specified." ;
145 if [ -n "${fatal}" -o "${hosts}" = "help" ] ; then
146 (echo "Usage: configure HOST" ;
148 echo "Options: [defaults in brackets]" ;
149 echo " +ansi configure w/ANSI library. [no ansi lib]" ;
150 echo " +destdir=MYDIR configure for installation into MYDIR. [/usr/local]" ;
151 echo " +forcesubdirs configure in subdirectories. [in source directories]" ;
152 echo " +lang=LANG configure to build LANG. [gcc]" ;
153 echo " +help print this message. [normal config]" ;
154 echo " +gas configure the compilers for use with gas. [native as]" ;
155 echo " +nfp configure the compilers default to soft floating point. [hard float]" ;
156 echo " +norecurse configure this directory only. [recurse]" ;
157 echo " +rm remove this configuration. [build a configuration]" ;
158 echo " +target=TARGET configure for TARGET. [TARGET = HOST]" ;
159 echo " +template=TEM rebuild configure using TEM. [normal config]" ;
161 echo "Where HOST and TARGET are something like \"vax\", \"sun3\", \"encore\", etc." ;
162 echo "Asking for more than one \"+target\" implies \"+forcesubdirs\". Any other" ;
163 echo "options given will apply to all targets.") 1>&2
165 if [ -r config.status
] ; then
172 #### configure.in common parts come in here.
173 # This file is a shell script that supplies the information necessary
174 # to tailor a template configure script into the configure script
175 # appropriate for this directory. For more information, check any
176 # existing configure script.
181 ## end of common part
183 # are we rebuilding config itself?
184 if [ -n "${template}" ] ; then
185 if [ ! -r ${template} ] ; then
186 echo "Can't find template ${template}."
190 mv configure configure.old
191 echo "#!/bin/sh" > configure
192 echo "# Please do not edit this file. It is generated automatically from" >> configure
193 echo "# configure.in and a configure template." >> configure
194 echo "configdirs=" >> configure
197 if [ -r configure.
in ] ; then
198 if [ -z "`grep '^# per\-host:' configure.in`" ] ; then
199 echo `pwd`/configure.
in has no
"per-host:" line.
203 if [ -z "`grep '^# per\-target:' configure.in`" ] ; then
204 echo `pwd`/configure.
in has no
"per-target:" line.
208 # split configure.in into common, per-host, and per-target parts
209 sed -e '/^# per\-host:/,$d' configure.
in > configure.com
210 sed -e '1,/^# per\-host:/d' -e '/^# per\-target:/,$d' configure.
in > configure.hst
211 sed -e '1,/^# per\-target:/d' configure.
in > configure.tgt
214 sed -e '/^#### configure.in common part/ r configure.com' \
215 -e '/^#### configure.in per\-host part/ r configure.hst' \
216 -e '/^#### configure.in per\-target part/ r configure.tgt' \
217 ${template} >> configure
219 rm -f configure.com configure.tgt configure.hst
221 echo Warning
: no configure.
in in `pwd`
222 cat ${template} >> configure
227 echo Rebuilt configure
in `pwd`
229 if [ -z "${norecurse}" ] ; then
230 while [ -n "${configdirs}" ] ; do
231 # set configdir to car of configdirs, configdirs to cdr of configdirs
232 set ${configdirs}; configdir
=$1; shift; configdirs
=$
*
234 if [ "`echo ${configdir}.*`" != "${configdir}.*" ] ; then
235 targetspecificdirs
=${configdir}.
*
240 for i
in ${configdir} ${targetspecificdirs} ; do
241 if [ -r $i/configure
] ; then
243 .
/configure
+template
=${template} ${verbose})
245 echo No configure
script in `pwd`/$i
254 # some sanity checks on configure.in
255 if [ -z "${srctrigger}" ] ; then
256 echo srctrigger not
set in configure.
in.
`pwd` not configured.
260 for host in ${hosts} ; do
262 if [ -z "${targets}" -o -n "${defaulttargets}" ] ; then
267 #### configure.in per-host parts come in here.
269 ## end of per-target part
272 for target
in ${targets} ; do
274 if [ -n "${verbose}" ] ; then
275 echo " "target
=\"${target}\"
278 #### configure.in per-target parts come in here.
282 ## end of per-target part
284 # Temporarily, we support only direct subdir builds.
285 hostsubdir
=Host-
${host}
286 targetsubdir
=Target-
${target}
288 if [ -n "${removing}" ] ; then
289 if [ -d "${hostsubdir}/${targetsubdir}" ] ; then
290 rm -rf ${hostsubdir}/${targetsubdir}
292 if [ -z "`(ls ${hostsubdir}) 2>&1 | grep Target-`" ] ; then
296 rm -f Makefile config.status
${links}
299 if [ -n "${forcesubdirs}" ] ; then
300 # check for existing status before allowing forced subdirs.
301 if [ -f Makefile
] ; then
302 echo "Makefile already exists in source directory. `pwd` not configured."
306 if [ ! -d ${hostsubdir} ] ; then mkdir
${hostsubdir} ; fi
309 if [ ! -d ${targetsubdir} ] ; then mkdir
${targetsubdir} ; fi
314 # if not subdir builds, then make sure none exist.
315 if [ -n "`(ls .) 2>&1 | grep Host-`" ] ; then
316 echo "Configured subdirs exist. `pwd` not configured."
321 # Find the source files, if location was not specified.
322 if [ -z "${srcdir}" ] ; then
325 if [ -n "${srctrigger}" -a ! -r ${srctrigger} ] ; then
330 if [ -n "${srctrigger}" -a ! -r ${srcdir}/${srctrigger} ] ; then
331 if [ -z "${srcdirdefaulted}" ] ; then
332 echo "${progname}: Can't find ${srcname} sources in \`${srcdir}'." 1>&2
334 echo "${progname}: Can't
find ${srcname} sources
in \
`.' or \`..
'." 1>&2
340 # Set up the list of links to be made.
341 # ${links} is the list of link names, and ${files} is the list of names to link to.
344 while [ -n "${files}" ] ; do
345 # set file to car of files, files to cdr of files
346 set ${files}; file=$1; shift; files=$*
347 set ${links}; link=$1; shift; links=$*
349 if [ ! -r ${srcdir}/${file} ] ; then
350 echo "${progname}: cannot create a link \"${link}\"," 1>&2
351 echo "since the file \"${file}\" does not exist." 1>&2
357 # Make a symlink if possible, otherwise try a hard link
358 ${symbolic_link} ${srcdir}/${file} ${link} 2>/dev/null || ${hard_link} ${srcdir}/${file} ${link}
360 if [ ! -r ${link} ] ; then
361 echo "${progname}: unable to link \"${link}\" to \"${srcdir}/${file}\"." 1>&2
364 echo "Linked \"${link}\" to \"${srcdir}/${file}\"."
367 # Create a .gdbinit file which runs the one in srcdir
368 # and tells GDB to look there for source files.
374 echo "dir ." > .gdbinit
375 echo "dir ${srcdir}" >> .gdbinit
376 echo "source ${srcdir}/.gdbinit" >> .gdbinit
380 # Install a makefile, and make it set VPATH
381 # if necessary so that the sources are found.
382 # Also change its value of srcdir.
384 # FIXME-someday: This business of always writing to .tem and mv back
385 # is so that I don't screw things up
while developing. Once this
386 # template is stable, these should be optimized. xoxorich.
388 # Define macro CROSS_COMPILE in compilation if this is a cross-compiler.
389 if [ "${host}" != "${target}" ] ; then
390 echo "CROSS=-DCROSS_COMPILE" > Makefile
391 echo "ALL=start.encap" >> Makefile
393 echo "ALL=all.internal" > Makefile
396 # set target, host, VPATH
397 echo "host = ${host}" >> Makefile
398 echo "target = ${target}" >> Makefile
400 if [ -n "${forcesubdirs}" ] ; then
401 echo "subdir = /${hostsubdir}/${targetsubdir}" >> Makefile
403 echo "subdir =" >> Makefile
406 # echo "workdir = `pwd`" >> Makefile
407 echo "VPATH = ${srcdir}" >> Makefile
410 cat ${srcdir}/Makefile.
in >> Makefile
412 # and shake thoroughly.
413 host_var_file
=hmake-
${host}
414 target_var_file
=tmake-
${target}
416 # Conditionalize the makefile for this host.
417 if [ -f ${srcdir}/config
/${host_var_file} ] ; then
418 sed -e "/^####/ r ${srcdir}/config/${host_var_file}" Makefile
> Makefile.tem
419 mv Makefile.tem Makefile
422 # Conditionalize the makefile for this target.
423 if [ -f ${srcdir}/config
/${target_var_file} ] ; then
424 sed -e "/^####/ r ${srcdir}/config/${target_var_file}" Makefile
> Makefile.tem
425 mv Makefile.tem Makefile
429 sed "s@^srcdir = \.@srcdir = ${srcdir}@" Makefile
> Makefile.tem
430 mv Makefile.tem Makefile
433 if [ -n "${destdir}" ] ; then
434 sed "s:^destdir =.*$:destdir = ${destdir}:" Makefile
> Makefile.tem
435 mv Makefile.tem Makefile
438 # Remove all formfeeds, since some Makes get confused by them.
439 sed "s/\f//" Makefile
>> Makefile.tem
440 mv Makefile.tem Makefile
443 sed "s:^SUBDIRS =.*$:SUBDIRS = ${configdirs}:" Makefile
> Makefile.tem
444 mv Makefile.tem Makefile
447 sed "s:^NONSUBDIRS =.*$:NONSUBDIRS = ${noconfigdirs}:" Makefile
> Makefile.tem
448 mv Makefile.tem Makefile
451 if [ -f ${srcdir}/config
/${host_var_file} ] ; then
452 using
=" using \"${host_var_file}\""
455 if [ -f ${srcdir}/config
/${target_var_file} ] ; then
456 if [ -z "${using}" ] ; then
457 andusing
=" using \"${target_var_file}\""
459 andusing
="${using} and \"${target_var_file}\""
465 echo "Created \"Makefile\"" in `pwd`${andusing}.
467 if [ "${host}" = "${target}" ] ; then
468 echo "Links are now set up for use with a ${target}." \
470 # | tee ${srcdir}/config.status
472 echo "Links are now set up for host ${host} and target ${target}." \
474 # | tee ${srcdir}/config.status
483 # If there are subdirectories, then recurse.
485 if [ -n "${norecurse}" -o -z "${configdirs}" ] ; then exit 0 ; fi
487 # configdirs is not null
488 for configdir
in ${configdirs} ; do
489 echo Configuring
${configdir}...
493 if [ -n "${defaulttargets}" ] ; then
494 for host in ${hosts} ; do
495 if [ -d ${configdir}.
${host} ] ; then
496 newspecifics
="${specifics} ${host}"
497 specifics
=${newspecifics}
499 newcommons
="${commons} ${host}"
500 commons
=${newcommons}
501 fi # if target specific
504 if [ -n "${commons}" ] ; then
506 .
/configure
${commons} ${verbose} ${forcesubdirs} ${removing}) \
508 fi # if any common hosts
510 if [ -n "${specifics}" ] ; then
511 for host in ${specifics} ; do
512 echo Configuring target specific directory
${configdir}.
${host}...
513 (cd ${configdir}.
${host} ;
514 .
/configure
${host} ${verbose} ${forcesubdirs} ${removing}) \
516 done # for host in specifics
517 fi # if there are any specifics
520 for target
in ${targets} ; do
521 if [ -d ${configdir}.
${target} ] ; then
522 newspecifics
="${specifics} ${target}"
523 specifics
=${newspecifics}
525 newcommons
="${commons} +target=${target}"
526 commons
=${newcommons}
529 done # check for target specific dir override
531 if [ -n "${verbose}" ] ; then
532 echo " "commons
=\"${commons}\"
533 echo " "specifics
=\"${specifics}\"
536 if [ -n "${commons}" ] ; then
538 .
/configure
${hosts} ${verbose} ${forcesubdirs} ${removing} ${commons}) \
542 if [ -n "${specifics}" ] ; then
543 for target
in ${specifics} ; do
544 echo Configuring target specific directory
${configdir}.
${target}...
545 (cd ${configdir}.
${target} ;
546 .
/configure
${hosts} ${verbose} ${forcesubdirs} ${removing} "+target=${target}") \
549 fi # if any specifics
550 fi # not default targets
557 # Revision 1.7 1991/04/17 01:41:18 rich
558 # Fixed a problem with host dependent parts.
560 # Revision 1.6 1991/04/16 00:18:44 rich
561 # Now handles multiple hosts and targets.
563 # Revision 1.5 1991/04/15 23:43:44 rich
564 # Now handles multiple hosts and targets.
566 # Revision 1.4 1991/04/13 02:11:03 rich
567 # Config cut 3. We now almost install a29k.
569 # Revision 1.3 1991/04/11 02:41:54 rich
570 # Cut 2 config. Subdirs.
581 # end of configure.template