bfd/reloc.c

   1 /* BFD support for handling relocation entries.
   2    Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
   3    2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
   4    2012
   5    Free Software Foundation, Inc.
   6    Written by Cygnus Support.
   7
   8    This file is part of BFD, the Binary File Descriptor library.
   9
  10    This program is free software; you can redistribute it and/or modify
  11    it under the terms of the GNU General Public License as published by
  12    the Free Software Foundation; either version 3 of the License, or
  13    (at your option) any later version.
  14
  15    This program is distributed in the hope that it will be useful,
  16    but WITHOUT ANY WARRANTY; without even the implied warranty of
  17    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18    GNU General Public License for more details.
  19
  20    You should have received a copy of the GNU General Public License
  21    along with this program; if not, write to the Free Software
  22    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
  23    MA 02110-1301, USA.  */
  24
  25 /*
  26 SECTION
  27         Relocations
  28
  29         BFD maintains relocations in much the same way it maintains
  30         symbols: they are left alone until required, then read in
  31         en-masse and translated into an internal form.  A common
  32         routine <<bfd_perform_relocation>> acts upon the
  33         canonical form to do the fixup.
  34
  35         Relocations are maintained on a per section basis,
  36         while symbols are maintained on a per BFD basis.
  37
  38         All that a back end has to do to fit the BFD interface is to create
  39         a <<struct reloc_cache_entry>> for each relocation
  40         in a particular section, and fill in the right bits of the structures.
  41
  42 @menu
  43 @* typedef arelent::
  44 @* howto manager::
  45 @end menu
  46
  47 */
  48
  49 /* DO compile in the reloc_code name table from libbfd.h.  */
  50 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
  51
  52 #include "sysdep.h"
  53 #include "bfd.h"
  54 #include "bfdlink.h"
  55 #include "libbfd.h"
  56 /*
  57 DOCDD
  58 INODE
  59         typedef arelent, howto manager, Relocations, Relocations
  60
  61 SUBSECTION
  62         typedef arelent
  63
  64         This is the structure of a relocation entry:
  65
  66 CODE_FRAGMENT
  67 .
  68 .typedef enum bfd_reloc_status
  69 .{
  70 .  {* No errors detected.  *}
  71 .  bfd_reloc_ok,
  72 .
  73 .  {* The relocation was performed, but there was an overflow.  *}
  74 .  bfd_reloc_overflow,
  75 .
  76 .  {* The address to relocate was not within the section supplied.  *}
  77 .  bfd_reloc_outofrange,
  78 .
  79 .  {* Used by special functions.  *}
  80 .  bfd_reloc_continue,
  81 .
  82 .  {* Unsupported relocation size requested.  *}
  83 .  bfd_reloc_notsupported,
  84 .
  85 .  {* Unused.  *}
  86 .  bfd_reloc_other,
  87 .
  88 .  {* The symbol to relocate against was undefined.  *}
  89 .  bfd_reloc_undefined,
  90 .
  91 .  {* The relocation was performed, but may not be ok - presently
  92 .     generated only when linking i960 coff files with i960 b.out
  93 .     symbols.  If this type is returned, the error_message argument
  94 .     to bfd_perform_relocation will be set.  *}
  95 .  bfd_reloc_dangerous
  96 . }
  97 . bfd_reloc_status_type;
  98 .
  99 .
 100 .typedef struct reloc_cache_entry
 101 .{
 102 .  {* A pointer into the canonical table of pointers.  *}
 103 .  struct bfd_symbol **sym_ptr_ptr;
 104 .
 105 .  {* offset in section.  *}
 106 .  bfd_size_type address;
 107 .
 108 .  {* addend for relocation value.  *}
 109 .  bfd_vma addend;
 110 .
 111 .  {* Pointer to how to perform the required relocation.  *}
 112 .  reloc_howto_type *howto;
 113 .
 114 .}
 115 .arelent;
 116 .
 117 */
 118
 119 /*
 120 DESCRIPTION
 121
 122         Here is a description of each of the fields within an <<arelent>>:
 123
 124         o <<sym_ptr_ptr>>
 125
 126         The symbol table pointer points to a pointer to the symbol
 127         associated with the relocation request.  It is the pointer
 128         into the table returned by the back end's
 129         <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
 130         referenced through a pointer to a pointer so that tools like
 131         the linker can fix up all the symbols of the same name by
 132         modifying only one pointer. The relocation routine looks in
 133         the symbol and uses the base of the section the symbol is
 134         attached to and the value of the symbol as the initial
 135         relocation offset. If the symbol pointer is zero, then the
 136         section provided is looked up.
 137
 138         o <<address>>
 139
 140         The <<address>> field gives the offset in bytes from the base of
 141         the section data which owns the relocation record to the first
 142         byte of relocatable information. The actual data relocated
 143         will be relative to this point; for example, a relocation
 144         type which modifies the bottom two bytes of a four byte word
 145         would not touch the first byte pointed to in a big endian
 146         world.
 147
 148         o <<addend>>
 149
 150         The <<addend>> is a value provided by the back end to be added (!)
 151         to the relocation offset. Its interpretation is dependent upon
 152         the howto. For example, on the 68k the code:
 153
 154 |        char foo[];
 155 |        main()
 156 |                {
 157 |                return foo[0x12345678];
 158 |                }
 159
 160         Could be compiled into:
 161
 162 |        linkw fp,#-4
 163 |        moveb @@#12345678,d0
 164 |        extbl d0
 165 |        unlk fp
 166 |        rts
 167
 168         This could create a reloc pointing to <<foo>>, but leave the
 169         offset in the data, something like:
 170
 171 |RELOCATION RECORDS FOR [.text]:
 172 |offset   type      value
 173 |00000006 32        _foo
 174 |
 175 |00000000 4e56 fffc          ; linkw fp,#-4
 176 |00000004 1039 1234 5678     ; moveb @@#12345678,d0
 177 |0000000a 49c0               ; extbl d0
 178 |0000000c 4e5e               ; unlk fp
 179 |0000000e 4e75               ; rts
 180
 181         Using coff and an 88k, some instructions don't have enough
 182         space in them to represent the full address range, and
 183         pointers have to be loaded in two parts. So you'd get something like:
 184
 185 |        or.u     r13,r0,hi16(_foo+0x12345678)
 186 |        ld.b     r2,r13,lo16(_foo+0x12345678)
 187 |        jmp      r1
 188
 189         This should create two relocs, both pointing to <<_foo>>, and with
 190         0x12340000 in their addend field. The data would consist of:
 191
 192 |RELOCATION RECORDS FOR [.text]:
 193 |offset   type      value
 194 |00000002 HVRT16    _foo+0x12340000
 195 |00000006 LVRT16    _foo+0x12340000
 196 |
 197 |00000000 5da05678           ; or.u r13,r0,0x5678
 198 |00000004 1c4d5678           ; ld.b r2,r13,0x5678
 199 |00000008 f400c001           ; jmp r1
 200
 201         The relocation routine digs out the value from the data, adds
 202         it to the addend to get the original offset, and then adds the
 203         value of <<_foo>>. Note that all 32 bits have to be kept around
 204         somewhere, to cope with carry from bit 15 to bit 16.
 205
 206         One further example is the sparc and the a.out format. The
 207         sparc has a similar problem to the 88k, in that some
 208         instructions don't have room for an entire offset, but on the
 209         sparc the parts are created in odd sized lumps. The designers of
 210         the a.out format chose to not use the data within the section
 211         for storing part of the offset; all the offset is kept within
 212         the reloc. Anything in the data should be ignored.
 213
 214 |        save %sp,-112,%sp
 215 |        sethi %hi(_foo+0x12345678),%g2
 216 |        ldsb [%g2+%lo(_foo+0x12345678)],%i0
 217 |        ret
 218 |        restore
 219
 220         Both relocs contain a pointer to <<foo>>, and the offsets
 221         contain junk.
 222
 223 |RELOCATION RECORDS FOR [.text]:
 224 |offset   type      value
 225 |00000004 HI22      _foo+0x12345678
 226 |00000008 LO10      _foo+0x12345678
 227 |
 228 |00000000 9de3bf90     ; save %sp,-112,%sp
 229 |00000004 05000000     ; sethi %hi(_foo+0),%g2
 230 |00000008 f048a000     ; ldsb [%g2+%lo(_foo+0)],%i0
 231 |0000000c 81c7e008     ; ret
 232 |00000010 81e80000     ; restore
 233
 234         o <<howto>>
 235
 236         The <<howto>> field can be imagined as a
 237         relocation instruction. It is a pointer to a structure which
 238         contains information on what to do with all of the other
 239         information in the reloc record and data section. A back end
 240         would normally have a relocation instruction set and turn
 241         relocations into pointers to the correct structure on input -
 242         but it would be possible to create each howto field on demand.
 243
 244 */
 245
 246 /*
 247 SUBSUBSECTION
 248         <<enum complain_overflow>>
 249
 250         Indicates what sort of overflow checking should be done when
 251         performing a relocation.
 252
 253 CODE_FRAGMENT
 254 .
 255 .enum complain_overflow
 256 .{
 257 .  {* Do not complain on overflow.  *}
 258 .  complain_overflow_dont,
 259 .
 260 .  {* Complain if the value overflows when considered as a signed
 261 .     number one bit larger than the field.  ie. A bitfield of N bits
 262 .     is allowed to represent -2**n to 2**n-1.  *}
 263 .  complain_overflow_bitfield,
 264 .
 265 .  {* Complain if the value overflows when considered as a signed
 266 .     number.  *}
 267 .  complain_overflow_signed,
 268 .
 269 .  {* Complain if the value overflows when considered as an
 270 .     unsigned number.  *}
 271 .  complain_overflow_unsigned
 272 .};
 273
 274 */
 275
 276 /*
 277 SUBSUBSECTION
 278         <<reloc_howto_type>>
 279
 280         The <<reloc_howto_type>> is a structure which contains all the
 281         information that libbfd needs to know to tie up a back end's data.
 282
 283 CODE_FRAGMENT
 284 .struct bfd_symbol;             {* Forward declaration.  *}
 285 .
 286 .struct reloc_howto_struct
 287 .{
 288 .  {*  The type field has mainly a documentary use - the back end can
 289 .      do what it wants with it, though normally the back end's
 290 .      external idea of what a reloc number is stored
 291 .      in this field.  For example, a PC relative word relocation
 292 .      in a coff environment has the type 023 - because that's
 293 .      what the outside world calls a R_PCRWORD reloc.  *}
 294 .  unsigned int type;
 295 .
 296 .  {*  The value the final relocation is shifted right by.  This drops
 297 .      unwanted data from the relocation.  *}
 298 .  unsigned int rightshift;
 299 .
 300 .  {*  The size of the item to be relocated.  This is *not* a
 301 .      power-of-two measure.  To get the number of bytes operated
 302 .      on by a type of relocation, use bfd_get_reloc_size.  *}
 303 .  int size;
 304 .
 305 .  {*  The number of bits in the item to be relocated.  This is used
 306 .      when doing overflow checking.  *}
 307 .  unsigned int bitsize;
 308 .
 309 .  {*  The relocation is relative to the field being relocated.  *}
 310 .  bfd_boolean pc_relative;
 311 .
 312 .  {*  The bit position of the reloc value in the destination.
 313 .      The relocated value is left shifted by this amount.  *}
 314 .  unsigned int bitpos;
 315 .
 316 .  {* What type of overflow error should be checked for when
 317 .     relocating.  *}
 318 .  enum complain_overflow complain_on_overflow;
 319 .
 320 .  {* If this field is non null, then the supplied function is
 321 .     called rather than the normal function.  This allows really
 322 .     strange relocation methods to be accommodated (e.g., i960 callj
 323 .     instructions).  *}
 324 .  bfd_reloc_status_type (*special_function)
 325 .    (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
 326 .     bfd *, char **);
 327 .
 328 .  {* The textual name of the relocation type.  *}
 329 .  char *name;
 330 .
 331 .  {* Some formats record a relocation addend in the section contents
 332 .     rather than with the relocation.  For ELF formats this is the
 333 .     distinction between USE_REL and USE_RELA (though the code checks
 334 .     for USE_REL == 1/0).  The value of this field is TRUE if the
 335 .     addend is recorded with the section contents; when performing a
 336 .     partial link (ld -r) the section contents (the data) will be
 337 .     modified.  The value of this field is FALSE if addends are
 338 .     recorded with the relocation (in arelent.addend); when performing
 339 .     a partial link the relocation will be modified.
 340 .     All relocations for all ELF USE_RELA targets should set this field
 341 .     to FALSE (values of TRUE should be looked on with suspicion).
 342 .     However, the converse is not true: not all relocations of all ELF
 343 .     USE_REL targets set this field to TRUE.  Why this is so is peculiar
 344 .     to each particular target.  For relocs that aren't used in partial
 345 .     links (e.g. GOT stuff) it doesn't matter what this is set to.  *}
 346 .  bfd_boolean partial_inplace;
 347 .
 348 .  {* src_mask selects the part of the instruction (or data) to be used
 349 .     in the relocation sum.  If the target relocations don't have an
 350 .     addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
 351 .     dst_mask to extract the addend from the section contents.  If
 352 .     relocations do have an addend in the reloc, eg. ELF USE_RELA, this
 353 .     field should be zero.  Non-zero values for ELF USE_RELA targets are
 354 .     bogus as in those cases the value in the dst_mask part of the
 355 .     section contents should be treated as garbage.  *}
 356 .  bfd_vma src_mask;
 357 .
 358 .  {* dst_mask selects which parts of the instruction (or data) are
 359 .     replaced with a relocated value.  *}
 360 .  bfd_vma dst_mask;
 361 .
 362 .  {* When some formats create PC relative instructions, they leave
 363 .     the value of the pc of the place being relocated in the offset
 364 .     slot of the instruction, so that a PC relative relocation can
 365 .     be made just by adding in an ordinary offset (e.g., sun3 a.out).
 366 .     Some formats leave the displacement part of an instruction
 367 .     empty (e.g., m88k bcs); this flag signals the fact.  *}
 368 .  bfd_boolean pcrel_offset;
 369 .};
 370 .
 371 */
 372
 373 /*
 374 FUNCTION
 375         The HOWTO Macro
 376
 377 DESCRIPTION
 378         The HOWTO define is horrible and will go away.
 379
 380 .#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
 381 .  { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
 382
 383 DESCRIPTION
 384         And will be replaced with the totally magic way. But for the
 385         moment, we are compatible, so do it this way.
 386
 387 .#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
 388 .  HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
 389 .         NAME, FALSE, 0, 0, IN)
 390 .
 391
 392 DESCRIPTION
 393         This is used to fill in an empty howto entry in an array.
 394
 395 .#define EMPTY_HOWTO(C) \
 396 .  HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
 397 .         NULL, FALSE, 0, 0, FALSE)
 398 .
 399
 400 DESCRIPTION
 401         Helper routine to turn a symbol into a relocation value.
 402
 403 .#define HOWTO_PREPARE(relocation, symbol)               \
 404 .  {                                                     \
 405 .    if (symbol != NULL)                                 \
 406 .      {                                                 \
 407 .        if (bfd_is_com_section (symbol->section))       \
 408 .          {                                             \
 409 .            relocation = 0;                             \
 410 .          }                                             \
 411 .        else                                            \
 412 .          {                                             \
 413 .            relocation = symbol->value;                 \
 414 .          }                                             \
 415 .      }                                                 \
 416 .  }
 417 .
 418 */
 419
 420 /*
 421 FUNCTION
 422         bfd_get_reloc_size
 423
 424 SYNOPSIS
 425         unsigned int bfd_get_reloc_size (reloc_howto_type *);
 426
 427 DESCRIPTION
 428         For a reloc_howto_type that operates on a fixed number of bytes,
 429         this returns the number of bytes operated on.
 430  */
 431
 432 unsigned int
 433 bfd_get_reloc_size (reloc_howto_type *howto)
 434 {
 435   switch (howto->size)
 436     {
 437     case 0: return 1;
 438     case 1: return 2;
 439     case 2: return 4;
 440     case 3: return 0;
 441     case 4: return 8;
 442     case 8: return 16;
 443     case -2: return 4;
 444     default: abort ();
 445     }
 446 }
 447
 448 /*
 449 TYPEDEF
 450         arelent_chain
 451
 452 DESCRIPTION
 453
 454         How relocs are tied together in an <<asection>>:
 455
 456 .typedef struct relent_chain
 457 .{
 458 .  arelent relent;
 459 .  struct relent_chain *next;
 460 .}
 461 .arelent_chain;
 462 .
 463 */
 464
 465 /* N_ONES produces N one bits, without overflowing machine arithmetic.  */
 466 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
 467
 468 /*
 469 FUNCTION
 470         bfd_check_overflow
 471
 472 SYNOPSIS
 473         bfd_reloc_status_type bfd_check_overflow
 474           (enum complain_overflow how,
 475            unsigned int bitsize,
 476            unsigned int rightshift,
 477            unsigned int addrsize,
 478            bfd_vma relocation);
 479
 480 DESCRIPTION
 481         Perform overflow checking on @var{relocation} which has
 482         @var{bitsize} significant bits and will be shifted right by
 483         @var{rightshift} bits, on a machine with addresses containing
 484         @var{addrsize} significant bits.  The result is either of
 485         @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
 486
 487 */
 488
 489 bfd_reloc_status_type
 490 bfd_check_overflow (enum complain_overflow how,
 491                     unsigned int bitsize,
 492                     unsigned int rightshift,
 493                     unsigned int addrsize,
 494                     bfd_vma relocation)
 495 {
 496   bfd_vma fieldmask, addrmask, signmask, ss, a;
 497   bfd_reloc_status_type flag = bfd_reloc_ok;
 498
 499   /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
 500      we'll be permissive: extra bits in the field mask will
 501      automatically extend the address mask for purposes of the
 502      overflow check.  */
 503   fieldmask = N_ONES (bitsize);
 504   signmask = ~fieldmask;
 505   addrmask = N_ONES (addrsize) | (fieldmask << rightshift);
 506   a = (relocation & addrmask) >> rightshift;
 507
 508   switch (how)
 509     {
 510     case complain_overflow_dont:
 511       break;
 512
 513     case complain_overflow_signed:
 514       /* If any sign bits are set, all sign bits must be set.  That
 515          is, A must be a valid negative address after shifting.  */
 516       signmask = ~ (fieldmask >> 1);
 517       /* Fall thru */
 518
 519     case complain_overflow_bitfield:
 520       /* Bitfields are sometimes signed, sometimes unsigned.  We
 521          explicitly allow an address wrap too, which means a bitfield
 522          of n bits is allowed to store -2**n to 2**n-1.  Thus overflow
 523          if the value has some, but not all, bits set outside the
 524          field.  */
 525       ss = a & signmask;
 526       if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
 527         flag = bfd_reloc_overflow;
 528       break;
 529
 530     case complain_overflow_unsigned:
 531       /* We have an overflow if the address does not fit in the field.  */
 532       if ((a & signmask) != 0)
 533         flag = bfd_reloc_overflow;
 534       break;
 535
 536     default:
 537       abort ();
 538     }
 539
 540   return flag;
 541 }
 542
 543 /*
 544 FUNCTION
 545         bfd_perform_relocation
 546
 547 SYNOPSIS
 548         bfd_reloc_status_type bfd_perform_relocation
 549           (bfd *abfd,
 550            arelent *reloc_entry,
 551            void *data,
 552            asection *input_section,
 553            bfd *output_bfd,
 554            char **error_message);
 555
 556 DESCRIPTION
 557         If @var{output_bfd} is supplied to this function, the
 558         generated image will be relocatable; the relocations are
 559         copied to the output file after they have been changed to
 560         reflect the new state of the world. There are two ways of
 561         reflecting the results of partial linkage in an output file:
 562         by modifying the output data in place, and by modifying the
 563         relocation record.  Some native formats (e.g., basic a.out and
 564         basic coff) have no way of specifying an addend in the
 565         relocation type, so the addend has to go in the output data.
 566         This is no big deal since in these formats the output data
 567         slot will always be big enough for the addend. Complex reloc
 568         types with addends were invented to solve just this problem.
 569         The @var{error_message} argument is set to an error message if
 570         this return @code{bfd_reloc_dangerous}.
 571
 572 */
 573
 574 bfd_reloc_status_type
 575 bfd_perform_relocation (bfd *abfd,
 576                         arelent *reloc_entry,
 577                         void *data,
 578                         asection *input_section,
 579                         bfd *output_bfd,
 580                         char **error_message)
 581 {
 582   bfd_vma relocation;
 583   bfd_reloc_status_type flag = bfd_reloc_ok;
 584   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 585   bfd_vma output_base = 0;
 586   reloc_howto_type *howto = reloc_entry->howto;
 587   asection *reloc_target_output_section;
 588   asymbol *symbol;
 589
 590   symbol = *(reloc_entry->sym_ptr_ptr);
 591   if (bfd_is_abs_section (symbol->section)
 592       && output_bfd != NULL)
 593     {
 594       reloc_entry->address += input_section->output_offset;
 595       return bfd_reloc_ok;
 596     }
 597
 598   /* If we are not producing relocatable output, return an error if
 599      the symbol is not defined.  An undefined weak symbol is
 600      considered to have a value of zero (SVR4 ABI, p. 4-27).  */
 601   if (bfd_is_und_section (symbol->section)
 602       && (symbol->flags & BSF_WEAK) == 0
 603       && output_bfd == NULL)
 604     flag = bfd_reloc_undefined;
 605
 606   /* If there is a function supplied to handle this relocation type,
 607      call it.  It'll return `bfd_reloc_continue' if further processing
 608      can be done.  */
 609   if (howto->special_function)
 610     {
 611       bfd_reloc_status_type cont;
 612       cont = howto->special_function (abfd, reloc_entry, symbol, data,
 613                                       input_section, output_bfd,
 614                                       error_message);
 615       if (cont != bfd_reloc_continue)
 616         return cont;
 617     }
 618
 619   /* Is the address of the relocation really within the section?  */
 620   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
 621     return bfd_reloc_outofrange;
 622
 623   /* Work out which section the relocation is targeted at and the
 624      initial relocation command value.  */
 625
 626   /* Get symbol value.  (Common symbols are special.)  */
 627   if (bfd_is_com_section (symbol->section))
 628     relocation = 0;
 629   else
 630     relocation = symbol->value;
 631
 632   reloc_target_output_section = symbol->section->output_section;
 633
 634   /* Convert input-section-relative symbol value to absolute.  */
 635   if ((output_bfd && ! howto->partial_inplace)
 636       || reloc_target_output_section == NULL)
 637     output_base = 0;
 638   else
 639     output_base = reloc_target_output_section->vma;
 640
 641   relocation += output_base + symbol->section->output_offset;
 642
 643   /* Add in supplied addend.  */
 644   relocation += reloc_entry->addend;
 645
 646   /* Here the variable relocation holds the final address of the
 647      symbol we are relocating against, plus any addend.  */
 648
 649   if (howto->pc_relative)
 650     {
 651       /* This is a PC relative relocation.  We want to set RELOCATION
 652          to the distance between the address of the symbol and the
 653          location.  RELOCATION is already the address of the symbol.
 654
 655          We start by subtracting the address of the section containing
 656          the location.
 657
 658          If pcrel_offset is set, we must further subtract the position
 659          of the location within the section.  Some targets arrange for
 660          the addend to be the negative of the position of the location
 661          within the section; for example, i386-aout does this.  For
 662          i386-aout, pcrel_offset is FALSE.  Some other targets do not
 663          include the position of the location; for example, m88kbcs,
 664          or ELF.  For those targets, pcrel_offset is TRUE.
 665
 666          If we are producing relocatable output, then we must ensure
 667          that this reloc will be correctly computed when the final
 668          relocation is done.  If pcrel_offset is FALSE we want to wind
 669          up with the negative of the location within the section,
 670          which means we must adjust the existing addend by the change
 671          in the location within the section.  If pcrel_offset is TRUE
 672          we do not want to adjust the existing addend at all.
 673
 674          FIXME: This seems logical to me, but for the case of
 675          producing relocatable output it is not what the code
 676          actually does.  I don't want to change it, because it seems
 677          far too likely that something will break.  */
 678
 679       relocation -=
 680         input_section->output_section->vma + input_section->output_offset;
 681
 682       if (howto->pcrel_offset)
 683         relocation -= reloc_entry->address;
 684     }
 685
 686   if (output_bfd != NULL)
 687     {
 688       if (! howto->partial_inplace)
 689         {
 690           /* This is a partial relocation, and we want to apply the relocation
 691              to the reloc entry rather than the raw data. Modify the reloc
 692              inplace to reflect what we now know.  */
 693           reloc_entry->addend = relocation;
 694           reloc_entry->address += input_section->output_offset;
 695           return flag;
 696         }
 697       else
 698         {
 699           /* This is a partial relocation, but inplace, so modify the
 700              reloc record a bit.
 701
 702              If we've relocated with a symbol with a section, change
 703              into a ref to the section belonging to the symbol.  */
 704
 705           reloc_entry->address += input_section->output_offset;
 706
 707           /* WTF?? */
 708           if (abfd->xvec->flavour == bfd_target_coff_flavour
 709               && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
 710               && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
 711             {
 712               /* For m68k-coff, the addend was being subtracted twice during
 713                  relocation with -r.  Removing the line below this comment
 714                  fixes that problem; see PR 2953.
 715
 716 However, Ian wrote the following, regarding removing the line below,
 717 which explains why it is still enabled:  --djm
 718
 719 If you put a patch like that into BFD you need to check all the COFF
 720 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
 721 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
 722 problem in a different way.  There may very well be a reason that the
 723 code works as it does.
 724
 725 Hmmm.  The first obvious point is that bfd_perform_relocation should
 726 not have any tests that depend upon the flavour.  It's seem like
 727 entirely the wrong place for such a thing.  The second obvious point
 728 is that the current code ignores the reloc addend when producing
 729 relocatable output for COFF.  That's peculiar.  In fact, I really
 730 have no idea what the point of the line you want to remove is.
 731
 732 A typical COFF reloc subtracts the old value of the symbol and adds in
 733 the new value to the location in the object file (if it's a pc
 734 relative reloc it adds the difference between the symbol value and the
 735 location).  When relocating we need to preserve that property.
 736
 737 BFD handles this by setting the addend to the negative of the old
 738 value of the symbol.  Unfortunately it handles common symbols in a
 739 non-standard way (it doesn't subtract the old value) but that's a
 740 different story (we can't change it without losing backward
 741 compatibility with old object files) (coff-i386 does subtract the old
 742 value, to be compatible with existing coff-i386 targets, like SCO).
 743
 744 So everything works fine when not producing relocatable output.  When
 745 we are producing relocatable output, logically we should do exactly
 746 what we do when not producing relocatable output.  Therefore, your
 747 patch is correct.  In fact, it should probably always just set
 748 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
 749 add the value into the object file.  This won't hurt the COFF code,
 750 which doesn't use the addend; I'm not sure what it will do to other
 751 formats (the thing to check for would be whether any formats both use
 752 the addend and set partial_inplace).
 753
 754 When I wanted to make coff-i386 produce relocatable output, I ran
 755 into the problem that you are running into: I wanted to remove that
 756 line.  Rather than risk it, I made the coff-i386 relocs use a special
 757 function; it's coff_i386_reloc in coff-i386.c.  The function
 758 specifically adds the addend field into the object file, knowing that
 759 bfd_perform_relocation is not going to.  If you remove that line, then
 760 coff-i386.c will wind up adding the addend field in twice.  It's
 761 trivial to fix; it just needs to be done.
 762
 763 The problem with removing the line is just that it may break some
 764 working code.  With BFD it's hard to be sure of anything.  The right
 765 way to deal with this is simply to build and test at least all the
 766 supported COFF targets.  It should be straightforward if time and disk
 767 space consuming.  For each target:
 768     1) build the linker
 769     2) generate some executable, and link it using -r (I would
 770        probably use paranoia.o and link against newlib/libc.a, which
 771        for all the supported targets would be available in
 772        /usr/cygnus/progressive/H-host/target/lib/libc.a).
 773     3) make the change to reloc.c
 774     4) rebuild the linker
 775     5) repeat step 2
 776     6) if the resulting object files are the same, you have at least
 777        made it no worse
 778     7) if they are different you have to figure out which version is
 779        right
 780 */
 781               relocation -= reloc_entry->addend;
 782               reloc_entry->addend = 0;
 783             }
 784           else
 785             {
 786               reloc_entry->addend = relocation;
 787             }
 788         }
 789     }
 790   else
 791     {
 792       reloc_entry->addend = 0;
 793     }
 794
 795   /* FIXME: This overflow checking is incomplete, because the value
 796      might have overflowed before we get here.  For a correct check we
 797      need to compute the value in a size larger than bitsize, but we
 798      can't reasonably do that for a reloc the same size as a host
 799      machine word.
 800      FIXME: We should also do overflow checking on the result after
 801      adding in the value contained in the object file.  */
 802   if (howto->complain_on_overflow != complain_overflow_dont
 803       && flag == bfd_reloc_ok)
 804     flag = bfd_check_overflow (howto->complain_on_overflow,
 805                                howto->bitsize,
 806                                howto->rightshift,
 807                                bfd_arch_bits_per_address (abfd),
 808                                relocation);
 809
 810   /* Either we are relocating all the way, or we don't want to apply
 811      the relocation to the reloc entry (probably because there isn't
 812      any room in the output format to describe addends to relocs).  */
 813
 814   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
 815      (OSF version 1.3, compiler version 3.11).  It miscompiles the
 816      following program:
 817
 818      struct str
 819      {
 820        unsigned int i0;
 821      } s = { 0 };
 822
 823      int
 824      main ()
 825      {
 826        unsigned long x;
 827
 828        x = 0x100000000;
 829        x <<= (unsigned long) s.i0;
 830        if (x == 0)
 831          printf ("failed\n");
 832        else
 833          printf ("succeeded (%lx)\n", x);
 834      }
 835      */
 836
 837   relocation >>= (bfd_vma) howto->rightshift;
 838
 839   /* Shift everything up to where it's going to be used.  */
 840   relocation <<= (bfd_vma) howto->bitpos;
 841
 842   /* Wait for the day when all have the mask in them.  */
 843
 844   /* What we do:
 845      i instruction to be left alone
 846      o offset within instruction
 847      r relocation offset to apply
 848      S src mask
 849      D dst mask
 850      N ~dst mask
 851      A part 1
 852      B part 2
 853      R result
 854
 855      Do this:
 856      ((  i i i i i o o o o o  from bfd_get<size>
 857      and           S S S S S) to get the size offset we want
 858      +   r r r r r r r r r r) to get the final value to place
 859      and           D D D D D  to chop to right size
 860      -----------------------
 861      =             A A A A A
 862      And this:
 863      (   i i i i i o o o o o  from bfd_get<size>
 864      and N N N N N          ) get instruction
 865      -----------------------
 866      =   B B B B B
 867
 868      And then:
 869      (   B B B B B
 870      or            A A A A A)
 871      -----------------------
 872      =   R R R R R R R R R R  put into bfd_put<size>
 873      */
 874
 875 #define DOIT(x) \
 876   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
 877
 878   switch (howto->size)
 879     {
 880     case 0:
 881       {
 882         char x = bfd_get_8 (abfd, (char *) data + octets);
 883         DOIT (x);
 884         bfd_put_8 (abfd, x, (unsigned char *) data + octets);
 885       }
 886       break;
 887
 888     case 1:
 889       {
 890         short x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 891         DOIT (x);
 892         bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data + octets);
 893       }
 894       break;
 895     case 2:
 896       {
 897         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 898         DOIT (x);
 899         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 900       }
 901       break;
 902     case -2:
 903       {
 904         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 905         relocation = -relocation;
 906         DOIT (x);
 907         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 908       }
 909       break;
 910
 911     case -1:
 912       {
 913         long x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 914         relocation = -relocation;
 915         DOIT (x);
 916         bfd_put_16 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 917       }
 918       break;
 919
 920     case 3:
 921       /* Do nothing */
 922       break;
 923
 924     case 4:
 925 #ifdef BFD64
 926       {
 927         bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets);
 928         DOIT (x);
 929         bfd_put_64 (abfd, x, (bfd_byte *) data + octets);
 930       }
 931 #else
 932       abort ();
 933 #endif
 934       break;
 935     default:
 936       return bfd_reloc_other;
 937     }
 938
 939   return flag;
 940 }
 941
 942 /*
 943 FUNCTION
 944         bfd_install_relocation
 945
 946 SYNOPSIS
 947         bfd_reloc_status_type bfd_install_relocation
 948           (bfd *abfd,
 949            arelent *reloc_entry,
 950            void *data, bfd_vma data_start,
 951            asection *input_section,
 952            char **error_message);
 953
 954 DESCRIPTION
 955         This looks remarkably like <<bfd_perform_relocation>>, except it
 956         does not expect that the section contents have been filled in.
 957         I.e., it's suitable for use when creating, rather than applying
 958         a relocation.
 959
 960         For now, this function should be considered reserved for the
 961         assembler.
 962 */
 963
 964 bfd_reloc_status_type
 965 bfd_install_relocation (bfd *abfd,
 966                         arelent *reloc_entry,
 967                         void *data_start,
 968                         bfd_vma data_start_offset,
 969                         asection *input_section,
 970                         char **error_message)
 971 {
 972   bfd_vma relocation;
 973   bfd_reloc_status_type flag = bfd_reloc_ok;
 974   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 975   bfd_vma output_base = 0;
 976   reloc_howto_type *howto = reloc_entry->howto;
 977   asection *reloc_target_output_section;
 978   asymbol *symbol;
 979   bfd_byte *data;
 980
 981   symbol = *(reloc_entry->sym_ptr_ptr);
 982   if (bfd_is_abs_section (symbol->section))
 983     {
 984       reloc_entry->address += input_section->output_offset;
 985       return bfd_reloc_ok;
 986     }
 987
 988   /* If there is a function supplied to handle this relocation type,
 989      call it.  It'll return `bfd_reloc_continue' if further processing
 990      can be done.  */
 991   if (howto->special_function)
 992     {
 993       bfd_reloc_status_type cont;
 994
 995       /* XXX - The special_function calls haven't been fixed up to deal
 996          with creating new relocations and section contents.  */
 997       cont = howto->special_function (abfd, reloc_entry, symbol,
 998                                       /* XXX - Non-portable! */
 999                                       ((bfd_byte *) data_start
1000                                        - data_start_offset),
1001                                       input_section, abfd, error_message);
1002       if (cont != bfd_reloc_continue)
1003         return cont;
1004     }
1005
1006   /* Is the address of the relocation really within the section?  */
1007   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
1008     return bfd_reloc_outofrange;
1009
1010   /* Work out which section the relocation is targeted at and the
1011      initial relocation command value.  */
1012
1013   /* Get symbol value.  (Common symbols are special.)  */
1014   if (bfd_is_com_section (symbol->section))
1015     relocation = 0;
1016   else
1017     relocation = symbol->value;
1018
1019   reloc_target_output_section = symbol->section->output_section;
1020
1021   /* Convert input-section-relative symbol value to absolute.  */
1022   if (! howto->partial_inplace)
1023     output_base = 0;
1024   else
1025     output_base = reloc_target_output_section->vma;
1026
1027   relocation += output_base + symbol->section->output_offset;
1028
1029   /* Add in supplied addend.  */
1030   relocation += reloc_entry->addend;
1031
1032   /* Here the variable relocation holds the final address of the
1033      symbol we are relocating against, plus any addend.  */
1034
1035   if (howto->pc_relative)
1036     {
1037       /* This is a PC relative relocation.  We want to set RELOCATION
1038          to the distance between the address of the symbol and the
1039          location.  RELOCATION is already the address of the symbol.
1040
1041          We start by subtracting the address of the section containing
1042          the location.
1043
1044          If pcrel_offset is set, we must further subtract the position
1045          of the location within the section.  Some targets arrange for
1046          the addend to be the negative of the position of the location
1047          within the section; for example, i386-aout does this.  For
1048          i386-aout, pcrel_offset is FALSE.  Some other targets do not
1049          include the position of the location; for example, m88kbcs,
1050          or ELF.  For those targets, pcrel_offset is TRUE.
1051
1052          If we are producing relocatable output, then we must ensure
1053          that this reloc will be correctly computed when the final
1054          relocation is done.  If pcrel_offset is FALSE we want to wind
1055          up with the negative of the location within the section,
1056          which means we must adjust the existing addend by the change
1057          in the location within the section.  If pcrel_offset is TRUE
1058          we do not want to adjust the existing addend at all.
1059
1060          FIXME: This seems logical to me, but for the case of
1061          producing relocatable output it is not what the code
1062          actually does.  I don't want to change it, because it seems
1063          far too likely that something will break.  */
1064
1065       relocation -=
1066         input_section->output_section->vma + input_section->output_offset;
1067
1068       if (howto->pcrel_offset && howto->partial_inplace)
1069         relocation -= reloc_entry->address;
1070     }
1071
1072   if (! howto->partial_inplace)
1073     {
1074       /* This is a partial relocation, and we want to apply the relocation
1075          to the reloc entry rather than the raw data. Modify the reloc
1076          inplace to reflect what we now know.  */
1077       reloc_entry->addend = relocation;
1078       reloc_entry->address += input_section->output_offset;
1079       return flag;
1080     }
1081   else
1082     {
1083       /* This is a partial relocation, but inplace, so modify the
1084          reloc record a bit.
1085
1086          If we've relocated with a symbol with a section, change
1087          into a ref to the section belonging to the symbol.  */
1088       reloc_entry->address += input_section->output_offset;
1089
1090       /* WTF?? */
1091       if (abfd->xvec->flavour == bfd_target_coff_flavour
1092           && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1093           && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1094         {
1095
1096           /* For m68k-coff, the addend was being subtracted twice during
1097              relocation with -r.  Removing the line below this comment
1098              fixes that problem; see PR 2953.
1099
1100 However, Ian wrote the following, regarding removing the line below,
1101 which explains why it is still enabled:  --djm
1102
1103 If you put a patch like that into BFD you need to check all the COFF
1104 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
1105 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1106 problem in a different way.  There may very well be a reason that the
1107 code works as it does.
1108
1109 Hmmm.  The first obvious point is that bfd_install_relocation should
1110 not have any tests that depend upon the flavour.  It's seem like
1111 entirely the wrong place for such a thing.  The second obvious point
1112 is that the current code ignores the reloc addend when producing
1113 relocatable output for COFF.  That's peculiar.  In fact, I really
1114 have no idea what the point of the line you want to remove is.
1115
1116 A typical COFF reloc subtracts the old value of the symbol and adds in
1117 the new value to the location in the object file (if it's a pc
1118 relative reloc it adds the difference between the symbol value and the
1119 location).  When relocating we need to preserve that property.
1120
1121 BFD handles this by setting the addend to the negative of the old
1122 value of the symbol.  Unfortunately it handles common symbols in a
1123 non-standard way (it doesn't subtract the old value) but that's a
1124 different story (we can't change it without losing backward
1125 compatibility with old object files) (coff-i386 does subtract the old
1126 value, to be compatible with existing coff-i386 targets, like SCO).
1127
1128 So everything works fine when not producing relocatable output.  When
1129 we are producing relocatable output, logically we should do exactly
1130 what we do when not producing relocatable output.  Therefore, your
1131 patch is correct.  In fact, it should probably always just set
1132 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1133 add the value into the object file.  This won't hurt the COFF code,
1134 which doesn't use the addend; I'm not sure what it will do to other
1135 formats (the thing to check for would be whether any formats both use
1136 the addend and set partial_inplace).
1137
1138 When I wanted to make coff-i386 produce relocatable output, I ran
1139 into the problem that you are running into: I wanted to remove that
1140 line.  Rather than risk it, I made the coff-i386 relocs use a special
1141 function; it's coff_i386_reloc in coff-i386.c.  The function
1142 specifically adds the addend field into the object file, knowing that
1143 bfd_install_relocation is not going to.  If you remove that line, then
1144 coff-i386.c will wind up adding the addend field in twice.  It's
1145 trivial to fix; it just needs to be done.
1146
1147 The problem with removing the line is just that it may break some
1148 working code.  With BFD it's hard to be sure of anything.  The right
1149 way to deal with this is simply to build and test at least all the
1150 supported COFF targets.  It should be straightforward if time and disk
1151 space consuming.  For each target:
1152     1) build the linker
1153     2) generate some executable, and link it using -r (I would
1154        probably use paranoia.o and link against newlib/libc.a, which
1155        for all the supported targets would be available in
1156        /usr/cygnus/progressive/H-host/target/lib/libc.a).
1157     3) make the change to reloc.c
1158     4) rebuild the linker
1159     5) repeat step 2
1160     6) if the resulting object files are the same, you have at least
1161        made it no worse
1162     7) if they are different you have to figure out which version is
1163        right.  */
1164           relocation -= reloc_entry->addend;
1165           /* FIXME: There should be no target specific code here...  */
1166           if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1167             reloc_entry->addend = 0;
1168         }
1169       else
1170         {
1171           reloc_entry->addend = relocation;
1172         }
1173     }
1174
1175   /* FIXME: This overflow checking is incomplete, because the value
1176      might have overflowed before we get here.  For a correct check we
1177      need to compute the value in a size larger than bitsize, but we
1178      can't reasonably do that for a reloc the same size as a host
1179      machine word.
1180      FIXME: We should also do overflow checking on the result after
1181      adding in the value contained in the object file.  */
1182   if (howto->complain_on_overflow != complain_overflow_dont)
1183     flag = bfd_check_overflow (howto->complain_on_overflow,
1184                                howto->bitsize,
1185                                howto->rightshift,
1186                                bfd_arch_bits_per_address (abfd),
1187                                relocation);
1188
1189   /* Either we are relocating all the way, or we don't want to apply
1190      the relocation to the reloc entry (probably because there isn't
1191      any room in the output format to describe addends to relocs).  */
1192
1193   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1194      (OSF version 1.3, compiler version 3.11).  It miscompiles the
1195      following program:
1196
1197      struct str
1198      {
1199        unsigned int i0;
1200      } s = { 0 };
1201
1202      int
1203      main ()
1204      {
1205        unsigned long x;
1206
1207        x = 0x100000000;
1208        x <<= (unsigned long) s.i0;
1209        if (x == 0)
1210          printf ("failed\n");
1211        else
1212          printf ("succeeded (%lx)\n", x);
1213      }
1214      */
1215
1216   relocation >>= (bfd_vma) howto->rightshift;
1217
1218   /* Shift everything up to where it's going to be used.  */
1219   relocation <<= (bfd_vma) howto->bitpos;
1220
1221   /* Wait for the day when all have the mask in them.  */
1222
1223   /* What we do:
1224      i instruction to be left alone
1225      o offset within instruction
1226      r relocation offset to apply
1227      S src mask
1228      D dst mask
1229      N ~dst mask
1230      A part 1
1231      B part 2
1232      R result
1233
1234      Do this:
1235      ((  i i i i i o o o o o  from bfd_get<size>
1236      and           S S S S S) to get the size offset we want
1237      +   r r r r r r r r r r) to get the final value to place
1238      and           D D D D D  to chop to right size
1239      -----------------------
1240      =             A A A A A
1241      And this:
1242      (   i i i i i o o o o o  from bfd_get<size>
1243      and N N N N N          ) get instruction
1244      -----------------------
1245      =   B B B B B
1246
1247      And then:
1248      (   B B B B B
1249      or            A A A A A)
1250      -----------------------
1251      =   R R R R R R R R R R  put into bfd_put<size>
1252      */
1253
1254 #define DOIT(x) \
1255   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
1256
1257   data = (bfd_byte *) data_start + (octets - data_start_offset);
1258
1259   switch (howto->size)
1260     {
1261     case 0:
1262       {
1263         char x = bfd_get_8 (abfd, data);
1264         DOIT (x);
1265         bfd_put_8 (abfd, x, data);
1266       }
1267       break;
1268
1269     case 1:
1270       {
1271         short x = bfd_get_16 (abfd, data);
1272         DOIT (x);
1273         bfd_put_16 (abfd, (bfd_vma) x, data);
1274       }
1275       break;
1276     case 2:
1277       {
1278         long x = bfd_get_32 (abfd, data);
1279         DOIT (x);
1280         bfd_put_32 (abfd, (bfd_vma) x, data);
1281       }
1282       break;
1283     case -2:
1284       {
1285         long x = bfd_get_32 (abfd, data);
1286         relocation = -relocation;
1287         DOIT (x);
1288         bfd_put_32 (abfd, (bfd_vma) x, data);
1289       }
1290       break;
1291
1292     case 3:
1293       /* Do nothing */
1294       break;
1295
1296     case 4:
1297       {
1298         bfd_vma x = bfd_get_64 (abfd, data);
1299         DOIT (x);
1300         bfd_put_64 (abfd, x, data);
1301       }
1302       break;
1303     default:
1304       return bfd_reloc_other;
1305     }
1306
1307   return flag;
1308 }
1309
1310 /* This relocation routine is used by some of the backend linkers.
1311    They do not construct asymbol or arelent structures, so there is no
1312    reason for them to use bfd_perform_relocation.  Also,
1313    bfd_perform_relocation is so hacked up it is easier to write a new
1314    function than to try to deal with it.
1315
1316    This routine does a final relocation.  Whether it is useful for a
1317    relocatable link depends upon how the object format defines
1318    relocations.
1319
1320    FIXME: This routine ignores any special_function in the HOWTO,
1321    since the existing special_function values have been written for
1322    bfd_perform_relocation.
1323
1324    HOWTO is the reloc howto information.
1325    INPUT_BFD is the BFD which the reloc applies to.
1326    INPUT_SECTION is the section which the reloc applies to.
1327    CONTENTS is the contents of the section.
1328    ADDRESS is the address of the reloc within INPUT_SECTION.
1329    VALUE is the value of the symbol the reloc refers to.
1330    ADDEND is the addend of the reloc.  */
1331
1332 bfd_reloc_status_type
1333 _bfd_final_link_relocate (reloc_howto_type *howto,
1334                           bfd *input_bfd,
1335                           asection *input_section,
1336                           bfd_byte *contents,
1337                           bfd_vma address,
1338                           bfd_vma value,
1339                           bfd_vma addend)
1340 {
1341   bfd_vma relocation;
1342
1343   /* Sanity check the address.  */
1344   if (address > bfd_get_section_limit (input_bfd, input_section))
1345     return bfd_reloc_outofrange;
1346
1347   /* This function assumes that we are dealing with a basic relocation
1348      against a symbol.  We want to compute the value of the symbol to
1349      relocate to.  This is just VALUE, the value of the symbol, plus
1350      ADDEND, any addend associated with the reloc.  */
1351   relocation = value + addend;
1352
1353   /* If the relocation is PC relative, we want to set RELOCATION to
1354      the distance between the symbol (currently in RELOCATION) and the
1355      location we are relocating.  Some targets (e.g., i386-aout)
1356      arrange for the contents of the section to be the negative of the
1357      offset of the location within the section; for such targets
1358      pcrel_offset is FALSE.  Other targets (e.g., m88kbcs or ELF)
1359      simply leave the contents of the section as zero; for such
1360      targets pcrel_offset is TRUE.  If pcrel_offset is FALSE we do not
1361      need to subtract out the offset of the location within the
1362      section (which is just ADDRESS).  */
1363   if (howto->pc_relative)
1364     {
1365       relocation -= (input_section->output_section->vma
1366                      + input_section->output_offset);
1367       if (howto->pcrel_offset)
1368         relocation -= address;
1369     }
1370
1371   return _bfd_relocate_contents (howto, input_bfd, relocation,
1372                                  contents + address);
1373 }
1374
1375 /* Relocate a given location using a given value and howto.  */
1376
1377 bfd_reloc_status_type
1378 _bfd_relocate_contents (reloc_howto_type *howto,
1379                         bfd *input_bfd,
1380                         bfd_vma relocation,
1381                         bfd_byte *location)
1382 {
1383   int size;
1384   bfd_vma x = 0;
1385   bfd_reloc_status_type flag;
1386   unsigned int rightshift = howto->rightshift;
1387   unsigned int bitpos = howto->bitpos;
1388
1389   /* If the size is negative, negate RELOCATION.  This isn't very
1390      general.  */
1391   if (howto->size < 0)
1392     relocation = -relocation;
1393
1394   /* Get the value we are going to relocate.  */
1395   size = bfd_get_reloc_size (howto);
1396   switch (size)
1397     {
1398     default:
1399     case 0:
1400       abort ();
1401     case 1:
1402       x = bfd_get_8 (input_bfd, location);
1403       break;
1404     case 2:
1405       x = bfd_get_16 (input_bfd, location);
1406       break;
1407     case 4:
1408       x = bfd_get_32 (input_bfd, location);
1409       break;
1410     case 8:
1411 #ifdef BFD64
1412       x = bfd_get_64 (input_bfd, location);
1413 #else
1414       abort ();
1415 #endif
1416       break;
1417     }
1418
1419   /* Check for overflow.  FIXME: We may drop bits during the addition
1420      which we don't check for.  We must either check at every single
1421      operation, which would be tedious, or we must do the computations
1422      in a type larger than bfd_vma, which would be inefficient.  */
1423   flag = bfd_reloc_ok;
1424   if (howto->complain_on_overflow != complain_overflow_dont)
1425     {
1426       bfd_vma addrmask, fieldmask, signmask, ss;
1427       bfd_vma a, b, sum;
1428
1429       /* Get the values to be added together.  For signed and unsigned
1430          relocations, we assume that all values should be truncated to
1431          the size of an address.  For bitfields, all the bits matter.
1432          See also bfd_check_overflow.  */
1433       fieldmask = N_ONES (howto->bitsize);
1434       signmask = ~fieldmask;
1435       addrmask = (N_ONES (bfd_arch_bits_per_address (input_bfd))
1436                   | (fieldmask << rightshift));
1437       a = (relocation & addrmask) >> rightshift;
1438       b = (x & howto->src_mask & addrmask) >> bitpos;
1439       addrmask >>= rightshift;
1440
1441       switch (howto->complain_on_overflow)
1442         {
1443         case complain_overflow_signed:
1444           /* If any sign bits are set, all sign bits must be set.
1445              That is, A must be a valid negative address after
1446              shifting.  */
1447           signmask = ~(fieldmask >> 1);
1448           /* Fall thru */
1449
1450         case complain_overflow_bitfield:
1451           /* Much like the signed check, but for a field one bit
1452              wider.  We allow a bitfield to represent numbers in the
1453              range -2**n to 2**n-1, where n is the number of bits in the
1454              field.  Note that when bfd_vma is 32 bits, a 32-bit reloc
1455              can't overflow, which is exactly what we want.  */
1456           ss = a & signmask;
1457           if (ss != 0 && ss != (addrmask & signmask))
1458             flag = bfd_reloc_overflow;
1459
1460           /* We only need this next bit of code if the sign bit of B
1461              is below the sign bit of A.  This would only happen if
1462              SRC_MASK had fewer bits than BITSIZE.  Note that if
1463              SRC_MASK has more bits than BITSIZE, we can get into
1464              trouble; we would need to verify that B is in range, as
1465              we do for A above.  */
1466           ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1467           ss >>= bitpos;
1468
1469           /* Set all the bits above the sign bit.  */
1470           b = (b ^ ss) - ss;
1471
1472           /* Now we can do the addition.  */
1473           sum = a + b;
1474
1475           /* See if the result has the correct sign.  Bits above the
1476              sign bit are junk now; ignore them.  If the sum is
1477              positive, make sure we did not have all negative inputs;
1478              if the sum is negative, make sure we did not have all
1479              positive inputs.  The test below looks only at the sign
1480              bits, and it really just
1481                  SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1482
1483              We mask with addrmask here to explicitly allow an address
1484              wrap-around.  The Linux kernel relies on it, and it is
1485              the only way to write assembler code which can run when
1486              loaded at a location 0x80000000 away from the location at
1487              which it is linked.  */
1488           if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1489             flag = bfd_reloc_overflow;
1490           break;
1491
1492         case complain_overflow_unsigned:
1493           /* Checking for an unsigned overflow is relatively easy:
1494              trim the addresses and add, and trim the result as well.
1495              Overflow is normally indicated when the result does not
1496              fit in the field.  However, we also need to consider the
1497              case when, e.g., fieldmask is 0x7fffffff or smaller, an
1498              input is 0x80000000, and bfd_vma is only 32 bits; then we
1499              will get sum == 0, but there is an overflow, since the
1500              inputs did not fit in the field.  Instead of doing a
1501              separate test, we can check for this by or-ing in the
1502              operands when testing for the sum overflowing its final
1503              field.  */
1504           sum = (a + b) & addrmask;
1505           if ((a | b | sum) & signmask)
1506             flag = bfd_reloc_overflow;
1507           break;
1508
1509         default:
1510           abort ();
1511         }
1512     }
1513
1514   /* Put RELOCATION in the right bits.  */
1515   relocation >>= (bfd_vma) rightshift;
1516   relocation <<= (bfd_vma) bitpos;
1517
1518   /* Add RELOCATION to the right bits of X.  */
1519   x = ((x & ~howto->dst_mask)
1520        | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1521
1522   /* Put the relocated value back in the object file.  */
1523   switch (size)
1524     {
1525     default:
1526       abort ();
1527     case 1:
1528       bfd_put_8 (input_bfd, x, location);
1529       break;
1530     case 2:
1531       bfd_put_16 (input_bfd, x, location);
1532       break;
1533     case 4:
1534       bfd_put_32 (input_bfd, x, location);
1535       break;
1536     case 8:
1537 #ifdef BFD64
1538       bfd_put_64 (input_bfd, x, location);
1539 #else
1540       abort ();
1541 #endif
1542       break;
1543     }
1544
1545   return flag;
1546 }
1547
1548 /* Clear a given location using a given howto, by applying a fixed relocation
1549    value and discarding any in-place addend.  This is used for fixed-up
1550    relocations against discarded symbols, to make ignorable debug or unwind
1551    information more obvious.  */
1552
1553 void
1554 _bfd_clear_contents (reloc_howto_type *howto,
1555                      bfd *input_bfd,
1556                      asection *input_section,
1557                      bfd_byte *location)
1558 {
1559   int size;
1560   bfd_vma x = 0;
1561
1562   /* Get the value we are going to relocate.  */
1563   size = bfd_get_reloc_size (howto);
1564   switch (size)
1565     {
1566     default:
1567     case 0:
1568       abort ();
1569     case 1:
1570       x = bfd_get_8 (input_bfd, location);
1571       break;
1572     case 2:
1573       x = bfd_get_16 (input_bfd, location);
1574       break;
1575     case 4:
1576       x = bfd_get_32 (input_bfd, location);
1577       break;
1578     case 8:
1579 #ifdef BFD64
1580       x = bfd_get_64 (input_bfd, location);
1581 #else
1582       abort ();
1583 #endif
1584       break;
1585     }
1586
1587   /* Zero out the unwanted bits of X.  */
1588   x &= ~howto->dst_mask;
1589
1590   /* For a range list, use 1 instead of 0 as placeholder.  0
1591      would terminate the list, hiding any later entries.  */
1592   if (strcmp (bfd_get_section_name (input_bfd, input_section),
1593               ".debug_ranges") == 0
1594       && (howto->dst_mask & 1) != 0)
1595     x |= 1;
1596
1597   /* Put the relocated value back in the object file.  */
1598   switch (size)
1599     {
1600     default:
1601     case 0:
1602       abort ();
1603     case 1:
1604       bfd_put_8 (input_bfd, x, location);
1605       break;
1606     case 2:
1607       bfd_put_16 (input_bfd, x, location);
1608       break;
1609     case 4:
1610       bfd_put_32 (input_bfd, x, location);
1611       break;
1612     case 8:
1613 #ifdef BFD64
1614       bfd_put_64 (input_bfd, x, location);
1615 #else
1616       abort ();
1617 #endif
1618       break;
1619     }
1620 }
1621
1622 /*
1623 DOCDD
1624 INODE
1625         howto manager,  , typedef arelent, Relocations
1626
1627 SUBSECTION
1628         The howto manager
1629
1630         When an application wants to create a relocation, but doesn't
1631         know what the target machine might call it, it can find out by
1632         using this bit of code.
1633
1634 */
1635
1636 /*
1637 TYPEDEF
1638         bfd_reloc_code_type
1639
1640 DESCRIPTION
1641         The insides of a reloc code.  The idea is that, eventually, there
1642         will be one enumerator for every type of relocation we ever do.
1643         Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1644         return a howto pointer.
1645
1646         This does mean that the application must determine the correct
1647         enumerator value; you can't get a howto pointer from a random set
1648         of attributes.
1649
1650 SENUM
1651    bfd_reloc_code_real
1652
1653 ENUM
1654   BFD_RELOC_64
1655 ENUMX
1656   BFD_RELOC_32
1657 ENUMX
1658   BFD_RELOC_26
1659 ENUMX
1660   BFD_RELOC_24
1661 ENUMX
1662   BFD_RELOC_16
1663 ENUMX
1664   BFD_RELOC_14
1665 ENUMX
1666   BFD_RELOC_8
1667 ENUMDOC
1668   Basic absolute relocations of N bits.
1669
1670 ENUM
1671   BFD_RELOC_64_PCREL
1672 ENUMX
1673   BFD_RELOC_32_PCREL
1674 ENUMX
1675   BFD_RELOC_24_PCREL
1676 ENUMX
1677   BFD_RELOC_16_PCREL
1678 ENUMX
1679   BFD_RELOC_12_PCREL
1680 ENUMX
1681   BFD_RELOC_8_PCREL
1682 ENUMDOC
1683   PC-relative relocations.  Sometimes these are relative to the address
1684 of the relocation itself; sometimes they are relative to the start of
1685 the section containing the relocation.  It depends on the specific target.
1686
1687 The 24-bit relocation is used in some Intel 960 configurations.
1688
1689 ENUM
1690   BFD_RELOC_32_SECREL
1691 ENUMDOC
1692   Section relative relocations.  Some targets need this for DWARF2.
1693
1694 ENUM
1695   BFD_RELOC_32_GOT_PCREL
1696 ENUMX
1697   BFD_RELOC_16_GOT_PCREL
1698 ENUMX
1699   BFD_RELOC_8_GOT_PCREL
1700 ENUMX
1701   BFD_RELOC_32_GOTOFF
1702 ENUMX
1703   BFD_RELOC_16_GOTOFF
1704 ENUMX
1705   BFD_RELOC_LO16_GOTOFF
1706 ENUMX
1707   BFD_RELOC_HI16_GOTOFF
1708 ENUMX
1709   BFD_RELOC_HI16_S_GOTOFF
1710 ENUMX
1711   BFD_RELOC_8_GOTOFF
1712 ENUMX
1713   BFD_RELOC_64_PLT_PCREL
1714 ENUMX
1715   BFD_RELOC_32_PLT_PCREL
1716 ENUMX
1717   BFD_RELOC_24_PLT_PCREL
1718 ENUMX
1719   BFD_RELOC_16_PLT_PCREL
1720 ENUMX
1721   BFD_RELOC_8_PLT_PCREL
1722 ENUMX
1723   BFD_RELOC_64_PLTOFF
1724 ENUMX
1725   BFD_RELOC_32_PLTOFF
1726 ENUMX
1727   BFD_RELOC_16_PLTOFF
1728 ENUMX
1729   BFD_RELOC_LO16_PLTOFF
1730 ENUMX
1731   BFD_RELOC_HI16_PLTOFF
1732 ENUMX
1733   BFD_RELOC_HI16_S_PLTOFF
1734 ENUMX
1735   BFD_RELOC_8_PLTOFF
1736 ENUMDOC
1737   For ELF.
1738
1739 ENUM
1740   BFD_RELOC_SIZE32
1741 ENUMX
1742   BFD_RELOC_SIZE64
1743 ENUMDOC
1744   Size relocations.
1745
1746 ENUM
1747   BFD_RELOC_68K_GLOB_DAT
1748 ENUMX
1749   BFD_RELOC_68K_JMP_SLOT
1750 ENUMX
1751   BFD_RELOC_68K_RELATIVE
1752 ENUMX
1753   BFD_RELOC_68K_TLS_GD32
1754 ENUMX
1755   BFD_RELOC_68K_TLS_GD16
1756 ENUMX
1757   BFD_RELOC_68K_TLS_GD8
1758 ENUMX
1759   BFD_RELOC_68K_TLS_LDM32
1760 ENUMX
1761   BFD_RELOC_68K_TLS_LDM16
1762 ENUMX
1763   BFD_RELOC_68K_TLS_LDM8
1764 ENUMX
1765   BFD_RELOC_68K_TLS_LDO32
1766 ENUMX
1767   BFD_RELOC_68K_TLS_LDO16
1768 ENUMX
1769   BFD_RELOC_68K_TLS_LDO8
1770 ENUMX
1771   BFD_RELOC_68K_TLS_IE32
1772 ENUMX
1773   BFD_RELOC_68K_TLS_IE16
1774 ENUMX
1775   BFD_RELOC_68K_TLS_IE8
1776 ENUMX
1777   BFD_RELOC_68K_TLS_LE32
1778 ENUMX
1779   BFD_RELOC_68K_TLS_LE16
1780 ENUMX
1781   BFD_RELOC_68K_TLS_LE8
1782 ENUMDOC
1783   Relocations used by 68K ELF.
1784
1785 ENUM
1786   BFD_RELOC_32_BASEREL
1787 ENUMX
1788   BFD_RELOC_16_BASEREL
1789 ENUMX
1790   BFD_RELOC_LO16_BASEREL
1791 ENUMX
1792   BFD_RELOC_HI16_BASEREL
1793 ENUMX
1794   BFD_RELOC_HI16_S_BASEREL
1795 ENUMX
1796   BFD_RELOC_8_BASEREL
1797 ENUMX
1798   BFD_RELOC_RVA
1799 ENUMDOC
1800   Linkage-table relative.
1801
1802 ENUM
1803   BFD_RELOC_8_FFnn
1804 ENUMDOC
1805   Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1806
1807 ENUM
1808   BFD_RELOC_32_PCREL_S2
1809 ENUMX
1810   BFD_RELOC_16_PCREL_S2
1811 ENUMX
1812   BFD_RELOC_23_PCREL_S2
1813 ENUMDOC
1814   These PC-relative relocations are stored as word displacements --
1815 i.e., byte displacements shifted right two bits.  The 30-bit word
1816 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1817 SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
1818 signed 16-bit displacement is used on the MIPS, and the 23-bit
1819 displacement is used on the Alpha.
1820
1821 ENUM
1822   BFD_RELOC_HI22
1823 ENUMX
1824   BFD_RELOC_LO10
1825 ENUMDOC
1826   High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1827 the target word.  These are used on the SPARC.
1828
1829 ENUM
1830   BFD_RELOC_GPREL16
1831 ENUMX
1832   BFD_RELOC_GPREL32
1833 ENUMDOC
1834   For systems that allocate a Global Pointer register, these are
1835 displacements off that register.  These relocation types are
1836 handled specially, because the value the register will have is
1837 decided relatively late.
1838
1839 ENUM
1840   BFD_RELOC_I960_CALLJ
1841 ENUMDOC
1842   Reloc types used for i960/b.out.
1843
1844 ENUM
1845   BFD_RELOC_NONE
1846 ENUMX
1847   BFD_RELOC_SPARC_WDISP22
1848 ENUMX
1849   BFD_RELOC_SPARC22
1850 ENUMX
1851   BFD_RELOC_SPARC13
1852 ENUMX
1853   BFD_RELOC_SPARC_GOT10
1854 ENUMX
1855   BFD_RELOC_SPARC_GOT13
1856 ENUMX
1857   BFD_RELOC_SPARC_GOT22
1858 ENUMX
1859   BFD_RELOC_SPARC_PC10
1860 ENUMX
1861   BFD_RELOC_SPARC_PC22
1862 ENUMX
1863   BFD_RELOC_SPARC_WPLT30
1864 ENUMX
1865   BFD_RELOC_SPARC_COPY
1866 ENUMX
1867   BFD_RELOC_SPARC_GLOB_DAT
1868 ENUMX
1869   BFD_RELOC_SPARC_JMP_SLOT
1870 ENUMX
1871   BFD_RELOC_SPARC_RELATIVE
1872 ENUMX
1873   BFD_RELOC_SPARC_UA16
1874 ENUMX
1875   BFD_RELOC_SPARC_UA32
1876 ENUMX
1877   BFD_RELOC_SPARC_UA64
1878 ENUMX
1879   BFD_RELOC_SPARC_GOTDATA_HIX22
1880 ENUMX
1881   BFD_RELOC_SPARC_GOTDATA_LOX10
1882 ENUMX
1883   BFD_RELOC_SPARC_GOTDATA_OP_HIX22
1884 ENUMX
1885   BFD_RELOC_SPARC_GOTDATA_OP_LOX10
1886 ENUMX
1887   BFD_RELOC_SPARC_GOTDATA_OP
1888 ENUMX
1889   BFD_RELOC_SPARC_JMP_IREL
1890 ENUMX
1891   BFD_RELOC_SPARC_IRELATIVE
1892 ENUMDOC
1893   SPARC ELF relocations.  There is probably some overlap with other
1894   relocation types already defined.
1895
1896 ENUM
1897   BFD_RELOC_SPARC_BASE13
1898 ENUMX
1899   BFD_RELOC_SPARC_BASE22
1900 ENUMDOC
1901   I think these are specific to SPARC a.out (e.g., Sun 4).
1902
1903 ENUMEQ
1904   BFD_RELOC_SPARC_64
1905   BFD_RELOC_64
1906 ENUMX
1907   BFD_RELOC_SPARC_10
1908 ENUMX
1909   BFD_RELOC_SPARC_11
1910 ENUMX
1911   BFD_RELOC_SPARC_OLO10
1912 ENUMX
1913   BFD_RELOC_SPARC_HH22
1914 ENUMX
1915   BFD_RELOC_SPARC_HM10
1916 ENUMX
1917   BFD_RELOC_SPARC_LM22
1918 ENUMX
1919   BFD_RELOC_SPARC_PC_HH22
1920 ENUMX
1921   BFD_RELOC_SPARC_PC_HM10
1922 ENUMX
1923   BFD_RELOC_SPARC_PC_LM22
1924 ENUMX
1925   BFD_RELOC_SPARC_WDISP16
1926 ENUMX
1927   BFD_RELOC_SPARC_WDISP19
1928 ENUMX
1929   BFD_RELOC_SPARC_7
1930 ENUMX
1931   BFD_RELOC_SPARC_6
1932 ENUMX
1933   BFD_RELOC_SPARC_5
1934 ENUMEQX
1935   BFD_RELOC_SPARC_DISP64
1936   BFD_RELOC_64_PCREL
1937 ENUMX
1938   BFD_RELOC_SPARC_PLT32
1939 ENUMX
1940   BFD_RELOC_SPARC_PLT64
1941 ENUMX
1942   BFD_RELOC_SPARC_HIX22
1943 ENUMX
1944   BFD_RELOC_SPARC_LOX10
1945 ENUMX
1946   BFD_RELOC_SPARC_H44
1947 ENUMX
1948   BFD_RELOC_SPARC_M44
1949 ENUMX
1950   BFD_RELOC_SPARC_L44
1951 ENUMX
1952   BFD_RELOC_SPARC_REGISTER
1953 ENUMX
1954   BFD_RELOC_SPARC_H34
1955 ENUMX
1956   BFD_RELOC_SPARC_SIZE32
1957 ENUMX
1958   BFD_RELOC_SPARC_SIZE64
1959 ENUMX
1960   BFD_RELOC_SPARC_WDISP10
1961 ENUMDOC
1962   SPARC64 relocations
1963
1964 ENUM
1965   BFD_RELOC_SPARC_REV32
1966 ENUMDOC
1967   SPARC little endian relocation
1968 ENUM
1969   BFD_RELOC_SPARC_TLS_GD_HI22
1970 ENUMX
1971   BFD_RELOC_SPARC_TLS_GD_LO10
1972 ENUMX
1973   BFD_RELOC_SPARC_TLS_GD_ADD
1974 ENUMX
1975   BFD_RELOC_SPARC_TLS_GD_CALL
1976 ENUMX
1977   BFD_RELOC_SPARC_TLS_LDM_HI22
1978 ENUMX
1979   BFD_RELOC_SPARC_TLS_LDM_LO10
1980 ENUMX
1981   BFD_RELOC_SPARC_TLS_LDM_ADD
1982 ENUMX
1983   BFD_RELOC_SPARC_TLS_LDM_CALL
1984 ENUMX
1985   BFD_RELOC_SPARC_TLS_LDO_HIX22
1986 ENUMX
1987   BFD_RELOC_SPARC_TLS_LDO_LOX10
1988 ENUMX
1989   BFD_RELOC_SPARC_TLS_LDO_ADD
1990 ENUMX
1991   BFD_RELOC_SPARC_TLS_IE_HI22
1992 ENUMX
1993   BFD_RELOC_SPARC_TLS_IE_LO10
1994 ENUMX
1995   BFD_RELOC_SPARC_TLS_IE_LD
1996 ENUMX
1997   BFD_RELOC_SPARC_TLS_IE_LDX
1998 ENUMX
1999   BFD_RELOC_SPARC_TLS_IE_ADD
2000 ENUMX
2001   BFD_RELOC_SPARC_TLS_LE_HIX22
2002 ENUMX
2003   BFD_RELOC_SPARC_TLS_LE_LOX10
2004 ENUMX
2005   BFD_RELOC_SPARC_TLS_DTPMOD32
2006 ENUMX
2007   BFD_RELOC_SPARC_TLS_DTPMOD64
2008 ENUMX
2009   BFD_RELOC_SPARC_TLS_DTPOFF32
2010 ENUMX
2011   BFD_RELOC_SPARC_TLS_DTPOFF64
2012 ENUMX
2013   BFD_RELOC_SPARC_TLS_TPOFF32
2014 ENUMX
2015   BFD_RELOC_SPARC_TLS_TPOFF64
2016 ENUMDOC
2017   SPARC TLS relocations
2018
2019 ENUM
2020   BFD_RELOC_SPU_IMM7
2021 ENUMX
2022   BFD_RELOC_SPU_IMM8
2023 ENUMX
2024   BFD_RELOC_SPU_IMM10
2025 ENUMX
2026   BFD_RELOC_SPU_IMM10W
2027 ENUMX
2028   BFD_RELOC_SPU_IMM16
2029 ENUMX
2030   BFD_RELOC_SPU_IMM16W
2031 ENUMX
2032   BFD_RELOC_SPU_IMM18
2033 ENUMX
2034   BFD_RELOC_SPU_PCREL9a
2035 ENUMX
2036   BFD_RELOC_SPU_PCREL9b
2037 ENUMX
2038   BFD_RELOC_SPU_PCREL16
2039 ENUMX
2040   BFD_RELOC_SPU_LO16
2041 ENUMX
2042   BFD_RELOC_SPU_HI16
2043 ENUMX
2044   BFD_RELOC_SPU_PPU32
2045 ENUMX
2046   BFD_RELOC_SPU_PPU64
2047 ENUMX
2048   BFD_RELOC_SPU_ADD_PIC
2049 ENUMDOC
2050   SPU Relocations.
2051
2052 ENUM
2053   BFD_RELOC_ALPHA_GPDISP_HI16
2054 ENUMDOC
2055   Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
2056      "addend" in some special way.
2057   For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
2058      writing; when reading, it will be the absolute section symbol.  The
2059      addend is the displacement in bytes of the "lda" instruction from
2060      the "ldah" instruction (which is at the address of this reloc).
2061 ENUM
2062   BFD_RELOC_ALPHA_GPDISP_LO16
2063 ENUMDOC
2064   For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
2065      with GPDISP_HI16 relocs.  The addend is ignored when writing the
2066      relocations out, and is filled in with the file's GP value on
2067      reading, for convenience.
2068
2069 ENUM
2070   BFD_RELOC_ALPHA_GPDISP
2071 ENUMDOC
2072   The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
2073      relocation except that there is no accompanying GPDISP_LO16
2074      relocation.
2075
2076 ENUM
2077   BFD_RELOC_ALPHA_LITERAL
2078 ENUMX
2079   BFD_RELOC_ALPHA_ELF_LITERAL
2080 ENUMX
2081   BFD_RELOC_ALPHA_LITUSE
2082 ENUMDOC
2083   The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
2084      the assembler turns it into a LDQ instruction to load the address of
2085      the symbol, and then fills in a register in the real instruction.
2086
2087      The LITERAL reloc, at the LDQ instruction, refers to the .lita
2088      section symbol.  The addend is ignored when writing, but is filled
2089      in with the file's GP value on reading, for convenience, as with the
2090      GPDISP_LO16 reloc.
2091
2092      The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2093      It should refer to the symbol to be referenced, as with 16_GOTOFF,
2094      but it generates output not based on the position within the .got
2095      section, but relative to the GP value chosen for the file during the
2096      final link stage.
2097
2098      The LITUSE reloc, on the instruction using the loaded address, gives
2099      information to the linker that it might be able to use to optimize
2100      away some literal section references.  The symbol is ignored (read
2101      as the absolute section symbol), and the "addend" indicates the type
2102      of instruction using the register:
2103               1 - "memory" fmt insn
2104               2 - byte-manipulation (byte offset reg)
2105               3 - jsr (target of branch)
2106
2107 ENUM
2108   BFD_RELOC_ALPHA_HINT
2109 ENUMDOC
2110   The HINT relocation indicates a value that should be filled into the
2111      "hint" field of a jmp/jsr/ret instruction, for possible branch-
2112      prediction logic which may be provided on some processors.
2113
2114 ENUM
2115   BFD_RELOC_ALPHA_LINKAGE
2116 ENUMDOC
2117   The LINKAGE relocation outputs a linkage pair in the object file,
2118      which is filled by the linker.
2119
2120 ENUM
2121   BFD_RELOC_ALPHA_CODEADDR
2122 ENUMDOC
2123   The CODEADDR relocation outputs a STO_CA in the object file,
2124      which is filled by the linker.
2125
2126 ENUM
2127   BFD_RELOC_ALPHA_GPREL_HI16
2128 ENUMX
2129   BFD_RELOC_ALPHA_GPREL_LO16
2130 ENUMDOC
2131   The GPREL_HI/LO relocations together form a 32-bit offset from the
2132      GP register.
2133
2134 ENUM
2135   BFD_RELOC_ALPHA_BRSGP
2136 ENUMDOC
2137   Like BFD_RELOC_23_PCREL_S2, except that the source and target must
2138   share a common GP, and the target address is adjusted for
2139   STO_ALPHA_STD_GPLOAD.
2140
2141 ENUM
2142   BFD_RELOC_ALPHA_NOP
2143 ENUMDOC
2144   The NOP relocation outputs a NOP if the longword displacement
2145      between two procedure entry points is < 2^21.
2146
2147 ENUM
2148   BFD_RELOC_ALPHA_BSR
2149 ENUMDOC
2150   The BSR relocation outputs a BSR if the longword displacement
2151      between two procedure entry points is < 2^21.
2152
2153 ENUM
2154   BFD_RELOC_ALPHA_LDA
2155 ENUMDOC
2156   The LDA relocation outputs a LDA if the longword displacement
2157      between two procedure entry points is < 2^16.
2158
2159 ENUM
2160   BFD_RELOC_ALPHA_BOH
2161 ENUMDOC
2162   The BOH relocation outputs a BSR if the longword displacement
2163      between two procedure entry points is < 2^21, or else a hint.
2164
2165 ENUM
2166   BFD_RELOC_ALPHA_TLSGD
2167 ENUMX
2168   BFD_RELOC_ALPHA_TLSLDM
2169 ENUMX
2170   BFD_RELOC_ALPHA_DTPMOD64
2171 ENUMX
2172   BFD_RELOC_ALPHA_GOTDTPREL16
2173 ENUMX
2174   BFD_RELOC_ALPHA_DTPREL64
2175 ENUMX
2176   BFD_RELOC_ALPHA_DTPREL_HI16
2177 ENUMX
2178   BFD_RELOC_ALPHA_DTPREL_LO16
2179 ENUMX
2180   BFD_RELOC_ALPHA_DTPREL16
2181 ENUMX
2182   BFD_RELOC_ALPHA_GOTTPREL16
2183 ENUMX
2184   BFD_RELOC_ALPHA_TPREL64
2185 ENUMX
2186   BFD_RELOC_ALPHA_TPREL_HI16
2187 ENUMX
2188   BFD_RELOC_ALPHA_TPREL_LO16
2189 ENUMX
2190   BFD_RELOC_ALPHA_TPREL16
2191 ENUMDOC
2192   Alpha thread-local storage relocations.
2193
2194 ENUM
2195   BFD_RELOC_MIPS_JMP
2196 ENUMX
2197   BFD_RELOC_MICROMIPS_JMP
2198 ENUMDOC
2199   The MIPS jump instruction.
2200
2201 ENUM
2202   BFD_RELOC_MIPS16_JMP
2203 ENUMDOC
2204   The MIPS16 jump instruction.
2205
2206 ENUM
2207   BFD_RELOC_MIPS16_GPREL
2208 ENUMDOC
2209   MIPS16 GP relative reloc.
2210
2211 ENUM
2212   BFD_RELOC_HI16
2213 ENUMDOC
2214   High 16 bits of 32-bit value; simple reloc.
2215
2216 ENUM
2217   BFD_RELOC_HI16_S
2218 ENUMDOC
2219   High 16 bits of 32-bit value but the low 16 bits will be sign
2220      extended and added to form the final result.  If the low 16
2221      bits form a negative number, we need to add one to the high value
2222      to compensate for the borrow when the low bits are added.
2223
2224 ENUM
2225   BFD_RELOC_LO16
2226 ENUMDOC
2227   Low 16 bits.
2228
2229 ENUM
2230   BFD_RELOC_HI16_PCREL
2231 ENUMDOC
2232   High 16 bits of 32-bit pc-relative value
2233 ENUM
2234   BFD_RELOC_HI16_S_PCREL
2235 ENUMDOC
2236   High 16 bits of 32-bit pc-relative value, adjusted
2237 ENUM
2238   BFD_RELOC_LO16_PCREL
2239 ENUMDOC
2240   Low 16 bits of pc-relative value
2241
2242 ENUM
2243   BFD_RELOC_MIPS16_GOT16
2244 ENUMX
2245   BFD_RELOC_MIPS16_CALL16
2246 ENUMDOC
2247   Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
2248      16-bit immediate fields
2249 ENUM
2250   BFD_RELOC_MIPS16_HI16
2251 ENUMDOC
2252   MIPS16 high 16 bits of 32-bit value.
2253 ENUM
2254   BFD_RELOC_MIPS16_HI16_S
2255 ENUMDOC
2256   MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2257      extended and added to form the final result.  If the low 16
2258      bits form a negative number, we need to add one to the high value
2259      to compensate for the borrow when the low bits are added.
2260 ENUM
2261   BFD_RELOC_MIPS16_LO16
2262 ENUMDOC
2263   MIPS16 low 16 bits.
2264
2265 ENUM
2266   BFD_RELOC_MIPS16_TLS_GD
2267 ENUMX
2268   BFD_RELOC_MIPS16_TLS_LDM
2269 ENUMX
2270   BFD_RELOC_MIPS16_TLS_DTPREL_HI16
2271 ENUMX
2272   BFD_RELOC_MIPS16_TLS_DTPREL_LO16
2273 ENUMX
2274   BFD_RELOC_MIPS16_TLS_GOTTPREL
2275 ENUMX
2276   BFD_RELOC_MIPS16_TLS_TPREL_HI16
2277 ENUMX
2278   BFD_RELOC_MIPS16_TLS_TPREL_LO16
2279 ENUMDOC
2280   MIPS16 TLS relocations
2281
2282 ENUM
2283   BFD_RELOC_MIPS_LITERAL
2284 ENUMX
2285   BFD_RELOC_MICROMIPS_LITERAL
2286 ENUMDOC
2287   Relocation against a MIPS literal section.
2288
2289 ENUM
2290   BFD_RELOC_MICROMIPS_7_PCREL_S1
2291 ENUMX
2292   BFD_RELOC_MICROMIPS_10_PCREL_S1
2293 ENUMX
2294   BFD_RELOC_MICROMIPS_16_PCREL_S1
2295 ENUMDOC
2296   microMIPS PC-relative relocations.
2297
2298 ENUM
2299   BFD_RELOC_MICROMIPS_GPREL16
2300 ENUMX
2301   BFD_RELOC_MICROMIPS_HI16
2302 ENUMX
2303   BFD_RELOC_MICROMIPS_HI16_S
2304 ENUMX
2305   BFD_RELOC_MICROMIPS_LO16
2306 ENUMDOC
2307   microMIPS versions of generic BFD relocs.
2308
2309 ENUM
2310   BFD_RELOC_MIPS_GOT16
2311 ENUMX
2312   BFD_RELOC_MICROMIPS_GOT16
2313 ENUMX
2314   BFD_RELOC_MIPS_CALL16
2315 ENUMX
2316   BFD_RELOC_MICROMIPS_CALL16
2317 ENUMX
2318   BFD_RELOC_MIPS_GOT_HI16
2319 ENUMX
2320   BFD_RELOC_MICROMIPS_GOT_HI16
2321 ENUMX
2322   BFD_RELOC_MIPS_GOT_LO16
2323 ENUMX
2324   BFD_RELOC_MICROMIPS_GOT_LO16
2325 ENUMX
2326   BFD_RELOC_MIPS_CALL_HI16
2327 ENUMX
2328   BFD_RELOC_MICROMIPS_CALL_HI16
2329 ENUMX
2330   BFD_RELOC_MIPS_CALL_LO16
2331 ENUMX
2332   BFD_RELOC_MICROMIPS_CALL_LO16
2333 ENUMX
2334   BFD_RELOC_MIPS_SUB
2335 ENUMX
2336   BFD_RELOC_MICROMIPS_SUB
2337 ENUMX
2338   BFD_RELOC_MIPS_GOT_PAGE
2339 ENUMX
2340   BFD_RELOC_MICROMIPS_GOT_PAGE
2341 ENUMX
2342   BFD_RELOC_MIPS_GOT_OFST
2343 ENUMX
2344   BFD_RELOC_MICROMIPS_GOT_OFST
2345 ENUMX
2346   BFD_RELOC_MIPS_GOT_DISP
2347 ENUMX
2348   BFD_RELOC_MICROMIPS_GOT_DISP
2349 ENUMX
2350   BFD_RELOC_MIPS_SHIFT5
2351 ENUMX
2352   BFD_RELOC_MIPS_SHIFT6
2353 ENUMX
2354   BFD_RELOC_MIPS_INSERT_A
2355 ENUMX
2356   BFD_RELOC_MIPS_INSERT_B
2357 ENUMX
2358   BFD_RELOC_MIPS_DELETE
2359 ENUMX
2360   BFD_RELOC_MIPS_HIGHEST
2361 ENUMX
2362   BFD_RELOC_MICROMIPS_HIGHEST
2363 ENUMX
2364   BFD_RELOC_MIPS_HIGHER
2365 ENUMX
2366   BFD_RELOC_MICROMIPS_HIGHER
2367 ENUMX
2368   BFD_RELOC_MIPS_SCN_DISP
2369 ENUMX
2370   BFD_RELOC_MICROMIPS_SCN_DISP
2371 ENUMX
2372   BFD_RELOC_MIPS_REL16
2373 ENUMX
2374   BFD_RELOC_MIPS_RELGOT
2375 ENUMX
2376   BFD_RELOC_MIPS_JALR
2377 ENUMX
2378   BFD_RELOC_MICROMIPS_JALR
2379 ENUMX
2380   BFD_RELOC_MIPS_TLS_DTPMOD32
2381 ENUMX
2382   BFD_RELOC_MIPS_TLS_DTPREL32
2383 ENUMX
2384   BFD_RELOC_MIPS_TLS_DTPMOD64
2385 ENUMX
2386   BFD_RELOC_MIPS_TLS_DTPREL64
2387 ENUMX
2388   BFD_RELOC_MIPS_TLS_GD
2389 ENUMX
2390   BFD_RELOC_MICROMIPS_TLS_GD
2391 ENUMX
2392   BFD_RELOC_MIPS_TLS_LDM
2393 ENUMX
2394   BFD_RELOC_MICROMIPS_TLS_LDM
2395 ENUMX
2396   BFD_RELOC_MIPS_TLS_DTPREL_HI16
2397 ENUMX
2398   BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16
2399 ENUMX
2400   BFD_RELOC_MIPS_TLS_DTPREL_LO16
2401 ENUMX
2402   BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16
2403 ENUMX
2404   BFD_RELOC_MIPS_TLS_GOTTPREL
2405 ENUMX
2406   BFD_RELOC_MICROMIPS_TLS_GOTTPREL
2407 ENUMX
2408   BFD_RELOC_MIPS_TLS_TPREL32
2409 ENUMX
2410   BFD_RELOC_MIPS_TLS_TPREL64
2411 ENUMX
2412   BFD_RELOC_MIPS_TLS_TPREL_HI16
2413 ENUMX
2414   BFD_RELOC_MICROMIPS_TLS_TPREL_HI16
2415 ENUMX
2416   BFD_RELOC_MIPS_TLS_TPREL_LO16
2417 ENUMX
2418   BFD_RELOC_MICROMIPS_TLS_TPREL_LO16
2419 ENUMDOC
2420   MIPS ELF relocations.
2421 COMMENT
2422
2423 ENUM
2424   BFD_RELOC_MIPS_COPY
2425 ENUMX
2426   BFD_RELOC_MIPS_JUMP_SLOT
2427 ENUMDOC
2428   MIPS ELF relocations (VxWorks and PLT extensions).
2429 COMMENT
2430
2431 ENUM
2432   BFD_RELOC_MOXIE_10_PCREL
2433 ENUMDOC
2434   Moxie ELF relocations.
2435 COMMENT
2436
2437 ENUM
2438   BFD_RELOC_FRV_LABEL16
2439 ENUMX
2440   BFD_RELOC_FRV_LABEL24
2441 ENUMX
2442   BFD_RELOC_FRV_LO16
2443 ENUMX
2444   BFD_RELOC_FRV_HI16
2445 ENUMX
2446   BFD_RELOC_FRV_GPREL12
2447 ENUMX
2448   BFD_RELOC_FRV_GPRELU12
2449 ENUMX
2450   BFD_RELOC_FRV_GPREL32
2451 ENUMX
2452   BFD_RELOC_FRV_GPRELHI
2453 ENUMX
2454   BFD_RELOC_FRV_GPRELLO
2455 ENUMX
2456   BFD_RELOC_FRV_GOT12
2457 ENUMX
2458   BFD_RELOC_FRV_GOTHI
2459 ENUMX
2460   BFD_RELOC_FRV_GOTLO
2461 ENUMX
2462   BFD_RELOC_FRV_FUNCDESC
2463 ENUMX
2464   BFD_RELOC_FRV_FUNCDESC_GOT12
2465 ENUMX
2466   BFD_RELOC_FRV_FUNCDESC_GOTHI
2467 ENUMX
2468   BFD_RELOC_FRV_FUNCDESC_GOTLO
2469 ENUMX
2470   BFD_RELOC_FRV_FUNCDESC_VALUE
2471 ENUMX
2472   BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2473 ENUMX
2474   BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2475 ENUMX
2476   BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2477 ENUMX
2478   BFD_RELOC_FRV_GOTOFF12
2479 ENUMX
2480   BFD_RELOC_FRV_GOTOFFHI
2481 ENUMX
2482   BFD_RELOC_FRV_GOTOFFLO
2483 ENUMX
2484   BFD_RELOC_FRV_GETTLSOFF
2485 ENUMX
2486   BFD_RELOC_FRV_TLSDESC_VALUE
2487 ENUMX
2488   BFD_RELOC_FRV_GOTTLSDESC12
2489 ENUMX
2490   BFD_RELOC_FRV_GOTTLSDESCHI
2491 ENUMX
2492   BFD_RELOC_FRV_GOTTLSDESCLO
2493 ENUMX
2494   BFD_RELOC_FRV_TLSMOFF12
2495 ENUMX
2496   BFD_RELOC_FRV_TLSMOFFHI
2497 ENUMX
2498   BFD_RELOC_FRV_TLSMOFFLO
2499 ENUMX
2500   BFD_RELOC_FRV_GOTTLSOFF12
2501 ENUMX
2502   BFD_RELOC_FRV_GOTTLSOFFHI
2503 ENUMX
2504   BFD_RELOC_FRV_GOTTLSOFFLO
2505 ENUMX
2506   BFD_RELOC_FRV_TLSOFF
2507 ENUMX
2508   BFD_RELOC_FRV_TLSDESC_RELAX
2509 ENUMX
2510   BFD_RELOC_FRV_GETTLSOFF_RELAX
2511 ENUMX
2512   BFD_RELOC_FRV_TLSOFF_RELAX
2513 ENUMX
2514   BFD_RELOC_FRV_TLSMOFF
2515 ENUMDOC
2516   Fujitsu Frv Relocations.
2517 COMMENT
2518
2519 ENUM
2520   BFD_RELOC_MN10300_GOTOFF24
2521 ENUMDOC
2522   This is a 24bit GOT-relative reloc for the mn10300.
2523 ENUM
2524   BFD_RELOC_MN10300_GOT32
2525 ENUMDOC
2526   This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2527   in the instruction.
2528 ENUM
2529   BFD_RELOC_MN10300_GOT24
2530 ENUMDOC
2531   This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2532   in the instruction.
2533 ENUM
2534   BFD_RELOC_MN10300_GOT16
2535 ENUMDOC
2536   This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2537   in the instruction.
2538 ENUM
2539   BFD_RELOC_MN10300_COPY
2540 ENUMDOC
2541   Copy symbol at runtime.
2542 ENUM
2543   BFD_RELOC_MN10300_GLOB_DAT
2544 ENUMDOC
2545   Create GOT entry.
2546 ENUM
2547   BFD_RELOC_MN10300_JMP_SLOT
2548 ENUMDOC
2549   Create PLT entry.
2550 ENUM
2551   BFD_RELOC_MN10300_RELATIVE
2552 ENUMDOC
2553   Adjust by program base.
2554 ENUM
2555   BFD_RELOC_MN10300_SYM_DIFF
2556 ENUMDOC
2557   Together with another reloc targeted at the same location,
2558   allows for a value that is the difference of two symbols
2559   in the same section.
2560 ENUM
2561   BFD_RELOC_MN10300_ALIGN
2562 ENUMDOC
2563   The addend of this reloc is an alignment power that must
2564   be honoured at the offset's location, regardless of linker
2565   relaxation.
2566 ENUM
2567   BFD_RELOC_MN10300_TLS_GD
2568 ENUMX
2569   BFD_RELOC_MN10300_TLS_LD
2570 ENUMX
2571   BFD_RELOC_MN10300_TLS_LDO
2572 ENUMX
2573   BFD_RELOC_MN10300_TLS_GOTIE
2574 ENUMX
2575   BFD_RELOC_MN10300_TLS_IE
2576 ENUMX
2577   BFD_RELOC_MN10300_TLS_LE
2578 ENUMX
2579   BFD_RELOC_MN10300_TLS_DTPMOD
2580 ENUMX
2581   BFD_RELOC_MN10300_TLS_DTPOFF
2582 ENUMX
2583   BFD_RELOC_MN10300_TLS_TPOFF
2584 ENUMDOC
2585   Various TLS-related relocations.
2586 ENUM
2587   BFD_RELOC_MN10300_32_PCREL
2588 ENUMDOC
2589   This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
2590   instruction.
2591 ENUM
2592   BFD_RELOC_MN10300_16_PCREL
2593 ENUMDOC
2594   This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
2595   instruction.
2596 COMMENT
2597
2598 ENUM
2599   BFD_RELOC_386_GOT32
2600 ENUMX
2601   BFD_RELOC_386_PLT32
2602 ENUMX
2603   BFD_RELOC_386_COPY
2604 ENUMX
2605   BFD_RELOC_386_GLOB_DAT
2606 ENUMX
2607   BFD_RELOC_386_JUMP_SLOT
2608 ENUMX
2609   BFD_RELOC_386_RELATIVE
2610 ENUMX
2611   BFD_RELOC_386_GOTOFF
2612 ENUMX
2613   BFD_RELOC_386_GOTPC
2614 ENUMX
2615   BFD_RELOC_386_TLS_TPOFF
2616 ENUMX
2617   BFD_RELOC_386_TLS_IE
2618 ENUMX
2619   BFD_RELOC_386_TLS_GOTIE
2620 ENUMX
2621   BFD_RELOC_386_TLS_LE
2622 ENUMX
2623   BFD_RELOC_386_TLS_GD
2624 ENUMX
2625   BFD_RELOC_386_TLS_LDM
2626 ENUMX
2627   BFD_RELOC_386_TLS_LDO_32
2628 ENUMX
2629   BFD_RELOC_386_TLS_IE_32
2630 ENUMX
2631   BFD_RELOC_386_TLS_LE_32
2632 ENUMX
2633   BFD_RELOC_386_TLS_DTPMOD32
2634 ENUMX
2635   BFD_RELOC_386_TLS_DTPOFF32
2636 ENUMX
2637   BFD_RELOC_386_TLS_TPOFF32
2638 ENUMX
2639   BFD_RELOC_386_TLS_GOTDESC
2640 ENUMX
2641   BFD_RELOC_386_TLS_DESC_CALL
2642 ENUMX
2643   BFD_RELOC_386_TLS_DESC
2644 ENUMX
2645   BFD_RELOC_386_IRELATIVE
2646 ENUMDOC
2647   i386/elf relocations
2648
2649 ENUM
2650   BFD_RELOC_X86_64_GOT32
2651 ENUMX
2652   BFD_RELOC_X86_64_PLT32
2653 ENUMX
2654   BFD_RELOC_X86_64_COPY
2655 ENUMX
2656   BFD_RELOC_X86_64_GLOB_DAT
2657 ENUMX
2658   BFD_RELOC_X86_64_JUMP_SLOT
2659 ENUMX
2660   BFD_RELOC_X86_64_RELATIVE
2661 ENUMX
2662   BFD_RELOC_X86_64_GOTPCREL
2663 ENUMX
2664   BFD_RELOC_X86_64_32S
2665 ENUMX
2666   BFD_RELOC_X86_64_DTPMOD64
2667 ENUMX
2668   BFD_RELOC_X86_64_DTPOFF64
2669 ENUMX
2670   BFD_RELOC_X86_64_TPOFF64
2671 ENUMX
2672   BFD_RELOC_X86_64_TLSGD
2673 ENUMX
2674   BFD_RELOC_X86_64_TLSLD
2675 ENUMX
2676   BFD_RELOC_X86_64_DTPOFF32
2677 ENUMX
2678   BFD_RELOC_X86_64_GOTTPOFF
2679 ENUMX
2680   BFD_RELOC_X86_64_TPOFF32
2681 ENUMX
2682   BFD_RELOC_X86_64_GOTOFF64
2683 ENUMX
2684   BFD_RELOC_X86_64_GOTPC32
2685 ENUMX
2686   BFD_RELOC_X86_64_GOT64
2687 ENUMX
2688   BFD_RELOC_X86_64_GOTPCREL64
2689 ENUMX
2690   BFD_RELOC_X86_64_GOTPC64
2691 ENUMX
2692   BFD_RELOC_X86_64_GOTPLT64
2693 ENUMX
2694   BFD_RELOC_X86_64_PLTOFF64
2695 ENUMX
2696   BFD_RELOC_X86_64_GOTPC32_TLSDESC
2697 ENUMX
2698   BFD_RELOC_X86_64_TLSDESC_CALL
2699 ENUMX
2700   BFD_RELOC_X86_64_TLSDESC
2701 ENUMX
2702   BFD_RELOC_X86_64_IRELATIVE
2703 ENUMDOC
2704   x86-64/elf relocations
2705
2706 ENUM
2707   BFD_RELOC_NS32K_IMM_8
2708 ENUMX
2709   BFD_RELOC_NS32K_IMM_16
2710 ENUMX
2711   BFD_RELOC_NS32K_IMM_32
2712 ENUMX
2713   BFD_RELOC_NS32K_IMM_8_PCREL
2714 ENUMX
2715   BFD_RELOC_NS32K_IMM_16_PCREL
2716 ENUMX
2717   BFD_RELOC_NS32K_IMM_32_PCREL
2718 ENUMX
2719   BFD_RELOC_NS32K_DISP_8
2720 ENUMX
2721   BFD_RELOC_NS32K_DISP_16
2722 ENUMX
2723   BFD_RELOC_NS32K_DISP_32
2724 ENUMX
2725   BFD_RELOC_NS32K_DISP_8_PCREL
2726 ENUMX
2727   BFD_RELOC_NS32K_DISP_16_PCREL
2728 ENUMX
2729   BFD_RELOC_NS32K_DISP_32_PCREL
2730 ENUMDOC
2731   ns32k relocations
2732
2733 ENUM
2734   BFD_RELOC_PDP11_DISP_8_PCREL
2735 ENUMX
2736   BFD_RELOC_PDP11_DISP_6_PCREL
2737 ENUMDOC
2738   PDP11 relocations
2739
2740 ENUM
2741   BFD_RELOC_PJ_CODE_HI16
2742 ENUMX
2743   BFD_RELOC_PJ_CODE_LO16
2744 ENUMX
2745   BFD_RELOC_PJ_CODE_DIR16
2746 ENUMX
2747   BFD_RELOC_PJ_CODE_DIR32
2748 ENUMX
2749   BFD_RELOC_PJ_CODE_REL16
2750 ENUMX
2751   BFD_RELOC_PJ_CODE_REL32
2752 ENUMDOC
2753   Picojava relocs.  Not all of these appear in object files.
2754
2755 ENUM
2756   BFD_RELOC_PPC_B26
2757 ENUMX
2758   BFD_RELOC_PPC_BA26
2759 ENUMX
2760   BFD_RELOC_PPC_TOC16
2761 ENUMX
2762   BFD_RELOC_PPC_B16
2763 ENUMX
2764   BFD_RELOC_PPC_B16_BRTAKEN
2765 ENUMX
2766   BFD_RELOC_PPC_B16_BRNTAKEN
2767 ENUMX
2768   BFD_RELOC_PPC_BA16
2769 ENUMX
2770   BFD_RELOC_PPC_BA16_BRTAKEN
2771 ENUMX
2772   BFD_RELOC_PPC_BA16_BRNTAKEN
2773 ENUMX
2774   BFD_RELOC_PPC_COPY
2775 ENUMX
2776   BFD_RELOC_PPC_GLOB_DAT
2777 ENUMX
2778   BFD_RELOC_PPC_JMP_SLOT
2779 ENUMX
2780   BFD_RELOC_PPC_RELATIVE
2781 ENUMX
2782   BFD_RELOC_PPC_LOCAL24PC
2783 ENUMX
2784   BFD_RELOC_PPC_EMB_NADDR32
2785 ENUMX
2786   BFD_RELOC_PPC_EMB_NADDR16
2787 ENUMX
2788   BFD_RELOC_PPC_EMB_NADDR16_LO
2789 ENUMX
2790   BFD_RELOC_PPC_EMB_NADDR16_HI
2791 ENUMX
2792   BFD_RELOC_PPC_EMB_NADDR16_HA
2793 ENUMX
2794   BFD_RELOC_PPC_EMB_SDAI16
2795 ENUMX
2796   BFD_RELOC_PPC_EMB_SDA2I16
2797 ENUMX
2798   BFD_RELOC_PPC_EMB_SDA2REL
2799 ENUMX
2800   BFD_RELOC_PPC_EMB_SDA21
2801 ENUMX
2802   BFD_RELOC_PPC_EMB_MRKREF
2803 ENUMX
2804   BFD_RELOC_PPC_EMB_RELSEC16
2805 ENUMX
2806   BFD_RELOC_PPC_EMB_RELST_LO
2807 ENUMX
2808   BFD_RELOC_PPC_EMB_RELST_HI
2809 ENUMX
2810   BFD_RELOC_PPC_EMB_RELST_HA
2811 ENUMX
2812   BFD_RELOC_PPC_EMB_BIT_FLD
2813 ENUMX
2814   BFD_RELOC_PPC_EMB_RELSDA
2815 ENUMX
2816   BFD_RELOC_PPC_VLE_REL8
2817 ENUMX
2818   BFD_RELOC_PPC_VLE_REL15
2819 ENUMX
2820   BFD_RELOC_PPC_VLE_REL24
2821 ENUMX
2822   BFD_RELOC_PPC_VLE_LO16A
2823 ENUMX
2824   BFD_RELOC_PPC_VLE_LO16D
2825 ENUMX
2826   BFD_RELOC_PPC_VLE_HI16A
2827 ENUMX
2828   BFD_RELOC_PPC_VLE_HI16D
2829 ENUMX
2830   BFD_RELOC_PPC_VLE_HA16A
2831 ENUMX
2832   BFD_RELOC_PPC_VLE_HA16D
2833 ENUMX
2834   BFD_RELOC_PPC_VLE_SDA21
2835 ENUMX
2836   BFD_RELOC_PPC_VLE_SDA21_LO
2837 ENUMX
2838   BFD_RELOC_PPC_VLE_SDAREL_LO16A
2839 ENUMX
2840   BFD_RELOC_PPC_VLE_SDAREL_LO16D
2841 ENUMX
2842   BFD_RELOC_PPC_VLE_SDAREL_HI16A
2843 ENUMX
2844   BFD_RELOC_PPC_VLE_SDAREL_HI16D
2845 ENUMX
2846   BFD_RELOC_PPC_VLE_SDAREL_HA16A
2847 ENUMX
2848   BFD_RELOC_PPC_VLE_SDAREL_HA16D
2849 ENUMX
2850   BFD_RELOC_PPC64_HIGHER
2851 ENUMX
2852   BFD_RELOC_PPC64_HIGHER_S
2853 ENUMX
2854   BFD_RELOC_PPC64_HIGHEST
2855 ENUMX
2856   BFD_RELOC_PPC64_HIGHEST_S
2857 ENUMX
2858   BFD_RELOC_PPC64_TOC16_LO
2859 ENUMX
2860   BFD_RELOC_PPC64_TOC16_HI
2861 ENUMX
2862   BFD_RELOC_PPC64_TOC16_HA
2863 ENUMX
2864   BFD_RELOC_PPC64_TOC
2865 ENUMX
2866   BFD_RELOC_PPC64_PLTGOT16
2867 ENUMX
2868   BFD_RELOC_PPC64_PLTGOT16_LO
2869 ENUMX
2870   BFD_RELOC_PPC64_PLTGOT16_HI
2871 ENUMX
2872   BFD_RELOC_PPC64_PLTGOT16_HA
2873 ENUMX
2874   BFD_RELOC_PPC64_ADDR16_DS
2875 ENUMX
2876   BFD_RELOC_PPC64_ADDR16_LO_DS
2877 ENUMX
2878   BFD_RELOC_PPC64_GOT16_DS
2879 ENUMX
2880   BFD_RELOC_PPC64_GOT16_LO_DS
2881 ENUMX
2882   BFD_RELOC_PPC64_PLT16_LO_DS
2883 ENUMX
2884   BFD_RELOC_PPC64_SECTOFF_DS
2885 ENUMX
2886   BFD_RELOC_PPC64_SECTOFF_LO_DS
2887 ENUMX
2888   BFD_RELOC_PPC64_TOC16_DS
2889 ENUMX
2890   BFD_RELOC_PPC64_TOC16_LO_DS
2891 ENUMX
2892   BFD_RELOC_PPC64_PLTGOT16_DS
2893 ENUMX
2894   BFD_RELOC_PPC64_PLTGOT16_LO_DS
2895 ENUMDOC
2896   Power(rs6000) and PowerPC relocations.
2897
2898 ENUM
2899   BFD_RELOC_PPC_TLS
2900 ENUMX
2901   BFD_RELOC_PPC_TLSGD
2902 ENUMX
2903   BFD_RELOC_PPC_TLSLD
2904 ENUMX
2905   BFD_RELOC_PPC_DTPMOD
2906 ENUMX
2907   BFD_RELOC_PPC_TPREL16
2908 ENUMX
2909   BFD_RELOC_PPC_TPREL16_LO
2910 ENUMX
2911   BFD_RELOC_PPC_TPREL16_HI
2912 ENUMX
2913   BFD_RELOC_PPC_TPREL16_HA
2914 ENUMX
2915   BFD_RELOC_PPC_TPREL
2916 ENUMX
2917   BFD_RELOC_PPC_DTPREL16
2918 ENUMX
2919   BFD_RELOC_PPC_DTPREL16_LO
2920 ENUMX
2921   BFD_RELOC_PPC_DTPREL16_HI
2922 ENUMX
2923   BFD_RELOC_PPC_DTPREL16_HA
2924 ENUMX
2925   BFD_RELOC_PPC_DTPREL
2926 ENUMX
2927   BFD_RELOC_PPC_GOT_TLSGD16
2928 ENUMX
2929   BFD_RELOC_PPC_GOT_TLSGD16_LO
2930 ENUMX
2931   BFD_RELOC_PPC_GOT_TLSGD16_HI
2932 ENUMX
2933   BFD_RELOC_PPC_GOT_TLSGD16_HA
2934 ENUMX
2935   BFD_RELOC_PPC_GOT_TLSLD16
2936 ENUMX
2937   BFD_RELOC_PPC_GOT_TLSLD16_LO
2938 ENUMX
2939   BFD_RELOC_PPC_GOT_TLSLD16_HI
2940 ENUMX
2941   BFD_RELOC_PPC_GOT_TLSLD16_HA
2942 ENUMX
2943   BFD_RELOC_PPC_GOT_TPREL16
2944 ENUMX
2945   BFD_RELOC_PPC_GOT_TPREL16_LO
2946 ENUMX
2947   BFD_RELOC_PPC_GOT_TPREL16_HI
2948 ENUMX
2949   BFD_RELOC_PPC_GOT_TPREL16_HA
2950 ENUMX
2951   BFD_RELOC_PPC_GOT_DTPREL16
2952 ENUMX
2953   BFD_RELOC_PPC_GOT_DTPREL16_LO
2954 ENUMX
2955   BFD_RELOC_PPC_GOT_DTPREL16_HI
2956 ENUMX
2957   BFD_RELOC_PPC_GOT_DTPREL16_HA
2958 ENUMX
2959   BFD_RELOC_PPC64_TPREL16_DS
2960 ENUMX
2961   BFD_RELOC_PPC64_TPREL16_LO_DS
2962 ENUMX
2963   BFD_RELOC_PPC64_TPREL16_HIGHER
2964 ENUMX
2965   BFD_RELOC_PPC64_TPREL16_HIGHERA
2966 ENUMX
2967   BFD_RELOC_PPC64_TPREL16_HIGHEST
2968 ENUMX
2969   BFD_RELOC_PPC64_TPREL16_HIGHESTA
2970 ENUMX
2971   BFD_RELOC_PPC64_DTPREL16_DS
2972 ENUMX
2973   BFD_RELOC_PPC64_DTPREL16_LO_DS
2974 ENUMX
2975   BFD_RELOC_PPC64_DTPREL16_HIGHER
2976 ENUMX
2977   BFD_RELOC_PPC64_DTPREL16_HIGHERA
2978 ENUMX
2979   BFD_RELOC_PPC64_DTPREL16_HIGHEST
2980 ENUMX
2981   BFD_RELOC_PPC64_DTPREL16_HIGHESTA
2982 ENUMDOC
2983   PowerPC and PowerPC64 thread-local storage relocations.
2984
2985 ENUM
2986   BFD_RELOC_I370_D12
2987 ENUMDOC
2988   IBM 370/390 relocations
2989
2990 ENUM
2991   BFD_RELOC_CTOR
2992 ENUMDOC
2993   The type of reloc used to build a constructor table - at the moment
2994   probably a 32 bit wide absolute relocation, but the target can choose.
2995   It generally does map to one of the other relocation types.
2996
2997 ENUM
2998   BFD_RELOC_ARM_PCREL_BRANCH
2999 ENUMDOC
3000   ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
3001   not stored in the instruction.
3002 ENUM
3003   BFD_RELOC_ARM_PCREL_BLX
3004 ENUMDOC
3005   ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
3006   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
3007   field in the instruction.
3008 ENUM
3009   BFD_RELOC_THUMB_PCREL_BLX
3010 ENUMDOC
3011   Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
3012   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
3013   field in the instruction.
3014 ENUM
3015   BFD_RELOC_ARM_PCREL_CALL
3016 ENUMDOC
3017   ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
3018 ENUM
3019   BFD_RELOC_ARM_PCREL_JUMP
3020 ENUMDOC
3021   ARM 26-bit pc-relative branch for B or conditional BL instruction.
3022
3023 ENUM
3024   BFD_RELOC_THUMB_PCREL_BRANCH7
3025 ENUMX
3026   BFD_RELOC_THUMB_PCREL_BRANCH9
3027 ENUMX
3028   BFD_RELOC_THUMB_PCREL_BRANCH12
3029 ENUMX
3030   BFD_RELOC_THUMB_PCREL_BRANCH20
3031 ENUMX
3032   BFD_RELOC_THUMB_PCREL_BRANCH23
3033 ENUMX
3034   BFD_RELOC_THUMB_PCREL_BRANCH25
3035 ENUMDOC
3036   Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
3037   The lowest bit must be zero and is not stored in the instruction.
3038   Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
3039   "nn" one smaller in all cases.  Note further that BRANCH23
3040   corresponds to R_ARM_THM_CALL.
3041
3042 ENUM
3043   BFD_RELOC_ARM_OFFSET_IMM
3044 ENUMDOC
3045   12-bit immediate offset, used in ARM-format ldr and str instructions.
3046
3047 ENUM
3048   BFD_RELOC_ARM_THUMB_OFFSET
3049 ENUMDOC
3050   5-bit immediate offset, used in Thumb-format ldr and str instructions.
3051
3052 ENUM
3053   BFD_RELOC_ARM_TARGET1
3054 ENUMDOC
3055   Pc-relative or absolute relocation depending on target.  Used for
3056   entries in .init_array sections.
3057 ENUM
3058   BFD_RELOC_ARM_ROSEGREL32
3059 ENUMDOC
3060   Read-only segment base relative address.
3061 ENUM
3062   BFD_RELOC_ARM_SBREL32
3063 ENUMDOC
3064   Data segment base relative address.
3065 ENUM
3066   BFD_RELOC_ARM_TARGET2
3067 ENUMDOC
3068   This reloc is used for references to RTTI data from exception handling
3069   tables.  The actual definition depends on the target.  It may be a
3070   pc-relative or some form of GOT-indirect relocation.
3071 ENUM
3072   BFD_RELOC_ARM_PREL31
3073 ENUMDOC
3074   31-bit PC relative address.
3075 ENUM
3076   BFD_RELOC_ARM_MOVW
3077 ENUMX
3078   BFD_RELOC_ARM_MOVT
3079 ENUMX
3080   BFD_RELOC_ARM_MOVW_PCREL
3081 ENUMX
3082   BFD_RELOC_ARM_MOVT_PCREL
3083 ENUMX
3084   BFD_RELOC_ARM_THUMB_MOVW
3085 ENUMX
3086   BFD_RELOC_ARM_THUMB_MOVT
3087 ENUMX
3088   BFD_RELOC_ARM_THUMB_MOVW_PCREL
3089 ENUMX
3090   BFD_RELOC_ARM_THUMB_MOVT_PCREL
3091 ENUMDOC
3092   Low and High halfword relocations for MOVW and MOVT instructions.
3093
3094 ENUM
3095   BFD_RELOC_ARM_JUMP_SLOT
3096 ENUMX
3097   BFD_RELOC_ARM_GLOB_DAT
3098 ENUMX
3099   BFD_RELOC_ARM_GOT32
3100 ENUMX
3101   BFD_RELOC_ARM_PLT32
3102 ENUMX
3103   BFD_RELOC_ARM_RELATIVE
3104 ENUMX
3105   BFD_RELOC_ARM_GOTOFF
3106 ENUMX
3107   BFD_RELOC_ARM_GOTPC
3108 ENUMX
3109   BFD_RELOC_ARM_GOT_PREL
3110 ENUMDOC
3111   Relocations for setting up GOTs and PLTs for shared libraries.
3112
3113 ENUM
3114   BFD_RELOC_ARM_TLS_GD32
3115 ENUMX
3116   BFD_RELOC_ARM_TLS_LDO32
3117 ENUMX
3118   BFD_RELOC_ARM_TLS_LDM32
3119 ENUMX
3120   BFD_RELOC_ARM_TLS_DTPOFF32
3121 ENUMX
3122   BFD_RELOC_ARM_TLS_DTPMOD32
3123 ENUMX
3124   BFD_RELOC_ARM_TLS_TPOFF32
3125 ENUMX
3126   BFD_RELOC_ARM_TLS_IE32
3127 ENUMX
3128   BFD_RELOC_ARM_TLS_LE32
3129 ENUMX
3130   BFD_RELOC_ARM_TLS_GOTDESC
3131 ENUMX
3132   BFD_RELOC_ARM_TLS_CALL
3133 ENUMX
3134   BFD_RELOC_ARM_THM_TLS_CALL
3135 ENUMX
3136   BFD_RELOC_ARM_TLS_DESCSEQ
3137 ENUMX
3138   BFD_RELOC_ARM_THM_TLS_DESCSEQ
3139 ENUMX
3140   BFD_RELOC_ARM_TLS_DESC
3141 ENUMDOC
3142   ARM thread-local storage relocations.
3143
3144 ENUM
3145   BFD_RELOC_ARM_ALU_PC_G0_NC
3146 ENUMX
3147   BFD_RELOC_ARM_ALU_PC_G0
3148 ENUMX
3149   BFD_RELOC_ARM_ALU_PC_G1_NC
3150 ENUMX
3151   BFD_RELOC_ARM_ALU_PC_G1
3152 ENUMX
3153   BFD_RELOC_ARM_ALU_PC_G2
3154 ENUMX
3155   BFD_RELOC_ARM_LDR_PC_G0
3156 ENUMX
3157   BFD_RELOC_ARM_LDR_PC_G1
3158 ENUMX
3159   BFD_RELOC_ARM_LDR_PC_G2
3160 ENUMX
3161   BFD_RELOC_ARM_LDRS_PC_G0
3162 ENUMX
3163   BFD_RELOC_ARM_LDRS_PC_G1
3164 ENUMX
3165   BFD_RELOC_ARM_LDRS_PC_G2
3166 ENUMX
3167   BFD_RELOC_ARM_LDC_PC_G0
3168 ENUMX
3169   BFD_RELOC_ARM_LDC_PC_G1
3170 ENUMX
3171   BFD_RELOC_ARM_LDC_PC_G2
3172 ENUMX
3173   BFD_RELOC_ARM_ALU_SB_G0_NC
3174 ENUMX
3175   BFD_RELOC_ARM_ALU_SB_G0
3176 ENUMX
3177   BFD_RELOC_ARM_ALU_SB_G1_NC
3178 ENUMX
3179   BFD_RELOC_ARM_ALU_SB_G1
3180 ENUMX
3181   BFD_RELOC_ARM_ALU_SB_G2
3182 ENUMX
3183   BFD_RELOC_ARM_LDR_SB_G0
3184 ENUMX
3185   BFD_RELOC_ARM_LDR_SB_G1
3186 ENUMX
3187   BFD_RELOC_ARM_LDR_SB_G2
3188 ENUMX
3189   BFD_RELOC_ARM_LDRS_SB_G0
3190 ENUMX
3191   BFD_RELOC_ARM_LDRS_SB_G1
3192 ENUMX
3193   BFD_RELOC_ARM_LDRS_SB_G2
3194 ENUMX
3195   BFD_RELOC_ARM_LDC_SB_G0
3196 ENUMX
3197   BFD_RELOC_ARM_LDC_SB_G1
3198 ENUMX
3199   BFD_RELOC_ARM_LDC_SB_G2
3200 ENUMDOC
3201   ARM group relocations.
3202
3203 ENUM
3204   BFD_RELOC_ARM_V4BX
3205 ENUMDOC
3206   Annotation of BX instructions.
3207
3208 ENUM
3209   BFD_RELOC_ARM_IRELATIVE
3210 ENUMDOC
3211   ARM support for STT_GNU_IFUNC.
3212
3213 ENUM
3214   BFD_RELOC_ARM_IMMEDIATE
3215 ENUMX
3216   BFD_RELOC_ARM_ADRL_IMMEDIATE
3217 ENUMX
3218   BFD_RELOC_ARM_T32_IMMEDIATE
3219 ENUMX
3220   BFD_RELOC_ARM_T32_ADD_IMM
3221 ENUMX
3222   BFD_RELOC_ARM_T32_IMM12
3223 ENUMX
3224   BFD_RELOC_ARM_T32_ADD_PC12
3225 ENUMX
3226   BFD_RELOC_ARM_SHIFT_IMM
3227 ENUMX
3228   BFD_RELOC_ARM_SMC
3229 ENUMX
3230   BFD_RELOC_ARM_HVC
3231 ENUMX
3232   BFD_RELOC_ARM_SWI
3233 ENUMX
3234   BFD_RELOC_ARM_MULTI
3235 ENUMX
3236   BFD_RELOC_ARM_CP_OFF_IMM
3237 ENUMX
3238   BFD_RELOC_ARM_CP_OFF_IMM_S2
3239 ENUMX
3240   BFD_RELOC_ARM_T32_CP_OFF_IMM
3241 ENUMX
3242   BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
3243 ENUMX
3244   BFD_RELOC_ARM_ADR_IMM
3245 ENUMX
3246   BFD_RELOC_ARM_LDR_IMM
3247 ENUMX
3248   BFD_RELOC_ARM_LITERAL
3249 ENUMX
3250   BFD_RELOC_ARM_IN_POOL
3251 ENUMX
3252   BFD_RELOC_ARM_OFFSET_IMM8
3253 ENUMX
3254   BFD_RELOC_ARM_T32_OFFSET_U8
3255 ENUMX
3256   BFD_RELOC_ARM_T32_OFFSET_IMM
3257 ENUMX
3258   BFD_RELOC_ARM_HWLITERAL
3259 ENUMX
3260   BFD_RELOC_ARM_THUMB_ADD
3261 ENUMX
3262   BFD_RELOC_ARM_THUMB_IMM
3263 ENUMX
3264   BFD_RELOC_ARM_THUMB_SHIFT
3265 ENUMDOC
3266   These relocs are only used within the ARM assembler.  They are not
3267   (at present) written to any object files.
3268
3269 ENUM
3270   BFD_RELOC_SH_PCDISP8BY2
3271 ENUMX
3272   BFD_RELOC_SH_PCDISP12BY2
3273 ENUMX
3274   BFD_RELOC_SH_IMM3
3275 ENUMX
3276   BFD_RELOC_SH_IMM3U
3277 ENUMX
3278   BFD_RELOC_SH_DISP12
3279 ENUMX
3280   BFD_RELOC_SH_DISP12BY2
3281 ENUMX
3282   BFD_RELOC_SH_DISP12BY4
3283 ENUMX
3284   BFD_RELOC_SH_DISP12BY8
3285 ENUMX
3286   BFD_RELOC_SH_DISP20
3287 ENUMX
3288   BFD_RELOC_SH_DISP20BY8
3289 ENUMX
3290   BFD_RELOC_SH_IMM4
3291 ENUMX
3292   BFD_RELOC_SH_IMM4BY2
3293 ENUMX
3294   BFD_RELOC_SH_IMM4BY4
3295 ENUMX
3296   BFD_RELOC_SH_IMM8
3297 ENUMX
3298   BFD_RELOC_SH_IMM8BY2
3299 ENUMX
3300   BFD_RELOC_SH_IMM8BY4
3301 ENUMX
3302   BFD_RELOC_SH_PCRELIMM8BY2
3303 ENUMX
3304   BFD_RELOC_SH_PCRELIMM8BY4
3305 ENUMX
3306   BFD_RELOC_SH_SWITCH16
3307 ENUMX
3308   BFD_RELOC_SH_SWITCH32
3309 ENUMX
3310   BFD_RELOC_SH_USES
3311 ENUMX
3312   BFD_RELOC_SH_COUNT
3313 ENUMX
3314   BFD_RELOC_SH_ALIGN
3315 ENUMX
3316   BFD_RELOC_SH_CODE
3317 ENUMX
3318   BFD_RELOC_SH_DATA
3319 ENUMX
3320   BFD_RELOC_SH_LABEL
3321 ENUMX
3322   BFD_RELOC_SH_LOOP_START
3323 ENUMX
3324   BFD_RELOC_SH_LOOP_END
3325 ENUMX
3326   BFD_RELOC_SH_COPY
3327 ENUMX
3328   BFD_RELOC_SH_GLOB_DAT
3329 ENUMX
3330   BFD_RELOC_SH_JMP_SLOT
3331 ENUMX
3332   BFD_RELOC_SH_RELATIVE
3333 ENUMX
3334   BFD_RELOC_SH_GOTPC
3335 ENUMX
3336   BFD_RELOC_SH_GOT_LOW16
3337 ENUMX
3338   BFD_RELOC_SH_GOT_MEDLOW16
3339 ENUMX
3340   BFD_RELOC_SH_GOT_MEDHI16
3341 ENUMX
3342   BFD_RELOC_SH_GOT_HI16
3343 ENUMX
3344   BFD_RELOC_SH_GOTPLT_LOW16
3345 ENUMX
3346   BFD_RELOC_SH_GOTPLT_MEDLOW16
3347 ENUMX
3348   BFD_RELOC_SH_GOTPLT_MEDHI16
3349 ENUMX
3350   BFD_RELOC_SH_GOTPLT_HI16
3351 ENUMX
3352   BFD_RELOC_SH_PLT_LOW16
3353 ENUMX
3354   BFD_RELOC_SH_PLT_MEDLOW16
3355 ENUMX
3356   BFD_RELOC_SH_PLT_MEDHI16
3357 ENUMX
3358   BFD_RELOC_SH_PLT_HI16
3359 ENUMX
3360   BFD_RELOC_SH_GOTOFF_LOW16
3361 ENUMX
3362   BFD_RELOC_SH_GOTOFF_MEDLOW16
3363 ENUMX
3364   BFD_RELOC_SH_GOTOFF_MEDHI16
3365 ENUMX
3366   BFD_RELOC_SH_GOTOFF_HI16
3367 ENUMX
3368   BFD_RELOC_SH_GOTPC_LOW16
3369 ENUMX
3370   BFD_RELOC_SH_GOTPC_MEDLOW16
3371 ENUMX
3372   BFD_RELOC_SH_GOTPC_MEDHI16
3373 ENUMX
3374   BFD_RELOC_SH_GOTPC_HI16
3375 ENUMX
3376   BFD_RELOC_SH_COPY64
3377 ENUMX
3378   BFD_RELOC_SH_GLOB_DAT64
3379 ENUMX
3380   BFD_RELOC_SH_JMP_SLOT64
3381 ENUMX
3382   BFD_RELOC_SH_RELATIVE64
3383 ENUMX
3384   BFD_RELOC_SH_GOT10BY4
3385 ENUMX
3386   BFD_RELOC_SH_GOT10BY8
3387 ENUMX
3388   BFD_RELOC_SH_GOTPLT10BY4
3389 ENUMX
3390   BFD_RELOC_SH_GOTPLT10BY8
3391 ENUMX
3392   BFD_RELOC_SH_GOTPLT32
3393 ENUMX
3394   BFD_RELOC_SH_SHMEDIA_CODE
3395 ENUMX
3396   BFD_RELOC_SH_IMMU5
3397 ENUMX
3398   BFD_RELOC_SH_IMMS6
3399 ENUMX
3400   BFD_RELOC_SH_IMMS6BY32
3401 ENUMX
3402   BFD_RELOC_SH_IMMU6
3403 ENUMX
3404   BFD_RELOC_SH_IMMS10
3405 ENUMX
3406   BFD_RELOC_SH_IMMS10BY2
3407 ENUMX
3408   BFD_RELOC_SH_IMMS10BY4
3409 ENUMX
3410   BFD_RELOC_SH_IMMS10BY8
3411 ENUMX
3412   BFD_RELOC_SH_IMMS16
3413 ENUMX
3414   BFD_RELOC_SH_IMMU16
3415 ENUMX
3416   BFD_RELOC_SH_IMM_LOW16
3417 ENUMX
3418   BFD_RELOC_SH_IMM_LOW16_PCREL
3419 ENUMX
3420   BFD_RELOC_SH_IMM_MEDLOW16
3421 ENUMX
3422   BFD_RELOC_SH_IMM_MEDLOW16_PCREL
3423 ENUMX
3424   BFD_RELOC_SH_IMM_MEDHI16
3425 ENUMX
3426   BFD_RELOC_SH_IMM_MEDHI16_PCREL
3427 ENUMX
3428   BFD_RELOC_SH_IMM_HI16
3429 ENUMX
3430   BFD_RELOC_SH_IMM_HI16_PCREL
3431 ENUMX
3432   BFD_RELOC_SH_PT_16
3433 ENUMX
3434   BFD_RELOC_SH_TLS_GD_32
3435 ENUMX
3436   BFD_RELOC_SH_TLS_LD_32
3437 ENUMX
3438   BFD_RELOC_SH_TLS_LDO_32
3439 ENUMX
3440   BFD_RELOC_SH_TLS_IE_32
3441 ENUMX
3442   BFD_RELOC_SH_TLS_LE_32
3443 ENUMX
3444   BFD_RELOC_SH_TLS_DTPMOD32
3445 ENUMX
3446   BFD_RELOC_SH_TLS_DTPOFF32
3447 ENUMX
3448   BFD_RELOC_SH_TLS_TPOFF32
3449 ENUMX
3450   BFD_RELOC_SH_GOT20
3451 ENUMX
3452   BFD_RELOC_SH_GOTOFF20
3453 ENUMX
3454   BFD_RELOC_SH_GOTFUNCDESC
3455 ENUMX
3456   BFD_RELOC_SH_GOTFUNCDESC20
3457 ENUMX
3458   BFD_RELOC_SH_GOTOFFFUNCDESC
3459 ENUMX
3460   BFD_RELOC_SH_GOTOFFFUNCDESC20
3461 ENUMX
3462   BFD_RELOC_SH_FUNCDESC
3463 ENUMDOC
3464   Renesas / SuperH SH relocs.  Not all of these appear in object files.
3465
3466 ENUM
3467   BFD_RELOC_ARC_B22_PCREL
3468 ENUMDOC
3469   ARC Cores relocs.
3470   ARC 22 bit pc-relative branch.  The lowest two bits must be zero and are
3471   not stored in the instruction.  The high 20 bits are installed in bits 26
3472   through 7 of the instruction.
3473 ENUM
3474   BFD_RELOC_ARC_B26
3475 ENUMDOC
3476   ARC 26 bit absolute branch.  The lowest two bits must be zero and are not
3477   stored in the instruction.  The high 24 bits are installed in bits 23
3478   through 0.
3479
3480 ENUM
3481   BFD_RELOC_BFIN_16_IMM
3482 ENUMDOC
3483   ADI Blackfin 16 bit immediate absolute reloc.
3484 ENUM
3485   BFD_RELOC_BFIN_16_HIGH
3486 ENUMDOC
3487   ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3488 ENUM
3489   BFD_RELOC_BFIN_4_PCREL
3490 ENUMDOC
3491   ADI Blackfin 'a' part of LSETUP.
3492 ENUM
3493   BFD_RELOC_BFIN_5_PCREL
3494 ENUMDOC
3495   ADI Blackfin.
3496 ENUM
3497   BFD_RELOC_BFIN_16_LOW
3498 ENUMDOC
3499   ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3500 ENUM
3501   BFD_RELOC_BFIN_10_PCREL
3502 ENUMDOC
3503   ADI Blackfin.
3504 ENUM
3505   BFD_RELOC_BFIN_11_PCREL
3506 ENUMDOC
3507   ADI Blackfin 'b' part of LSETUP.
3508 ENUM
3509   BFD_RELOC_BFIN_12_PCREL_JUMP
3510 ENUMDOC
3511   ADI Blackfin.
3512 ENUM
3513   BFD_RELOC_BFIN_12_PCREL_JUMP_S
3514 ENUMDOC
3515   ADI Blackfin Short jump, pcrel.
3516 ENUM
3517   BFD_RELOC_BFIN_24_PCREL_CALL_X
3518 ENUMDOC
3519   ADI Blackfin Call.x not implemented.
3520 ENUM
3521   BFD_RELOC_BFIN_24_PCREL_JUMP_L
3522 ENUMDOC
3523   ADI Blackfin Long Jump pcrel.
3524 ENUM
3525   BFD_RELOC_BFIN_GOT17M4
3526 ENUMX
3527   BFD_RELOC_BFIN_GOTHI
3528 ENUMX
3529   BFD_RELOC_BFIN_GOTLO
3530 ENUMX
3531   BFD_RELOC_BFIN_FUNCDESC
3532 ENUMX
3533   BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3534 ENUMX
3535   BFD_RELOC_BFIN_FUNCDESC_GOTHI
3536 ENUMX
3537   BFD_RELOC_BFIN_FUNCDESC_GOTLO
3538 ENUMX
3539   BFD_RELOC_BFIN_FUNCDESC_VALUE
3540 ENUMX
3541   BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3542 ENUMX
3543   BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3544 ENUMX
3545   BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3546 ENUMX
3547   BFD_RELOC_BFIN_GOTOFF17M4
3548 ENUMX
3549   BFD_RELOC_BFIN_GOTOFFHI
3550 ENUMX
3551   BFD_RELOC_BFIN_GOTOFFLO
3552 ENUMDOC
3553   ADI Blackfin FD-PIC relocations.
3554 ENUM
3555   BFD_RELOC_BFIN_GOT
3556 ENUMDOC
3557   ADI Blackfin GOT relocation.
3558 ENUM
3559   BFD_RELOC_BFIN_PLTPC
3560 ENUMDOC
3561   ADI Blackfin PLTPC relocation.
3562 ENUM
3563   BFD_ARELOC_BFIN_PUSH
3564 ENUMDOC
3565   ADI Blackfin arithmetic relocation.
3566 ENUM
3567   BFD_ARELOC_BFIN_CONST
3568 ENUMDOC
3569   ADI Blackfin arithmetic relocation.
3570 ENUM
3571   BFD_ARELOC_BFIN_ADD
3572 ENUMDOC
3573   ADI Blackfin arithmetic relocation.
3574 ENUM
3575   BFD_ARELOC_BFIN_SUB
3576 ENUMDOC
3577   ADI Blackfin arithmetic relocation.
3578 ENUM
3579   BFD_ARELOC_BFIN_MULT
3580 ENUMDOC
3581   ADI Blackfin arithmetic relocation.
3582 ENUM
3583   BFD_ARELOC_BFIN_DIV
3584 ENUMDOC
3585   ADI Blackfin arithmetic relocation.
3586 ENUM
3587   BFD_ARELOC_BFIN_MOD
3588 ENUMDOC
3589   ADI Blackfin arithmetic relocation.
3590 ENUM
3591   BFD_ARELOC_BFIN_LSHIFT
3592 ENUMDOC
3593   ADI Blackfin arithmetic relocation.
3594 ENUM
3595   BFD_ARELOC_BFIN_RSHIFT
3596 ENUMDOC
3597   ADI Blackfin arithmetic relocation.
3598 ENUM
3599   BFD_ARELOC_BFIN_AND
3600 ENUMDOC
3601   ADI Blackfin arithmetic relocation.
3602 ENUM
3603   BFD_ARELOC_BFIN_OR
3604 ENUMDOC
3605   ADI Blackfin arithmetic relocation.
3606 ENUM
3607   BFD_ARELOC_BFIN_XOR
3608 ENUMDOC
3609   ADI Blackfin arithmetic relocation.
3610 ENUM
3611   BFD_ARELOC_BFIN_LAND
3612 ENUMDOC
3613   ADI Blackfin arithmetic relocation.
3614 ENUM
3615   BFD_ARELOC_BFIN_LOR
3616 ENUMDOC
3617   ADI Blackfin arithmetic relocation.
3618 ENUM
3619   BFD_ARELOC_BFIN_LEN
3620 ENUMDOC
3621   ADI Blackfin arithmetic relocation.
3622 ENUM
3623   BFD_ARELOC_BFIN_NEG
3624 ENUMDOC
3625   ADI Blackfin arithmetic relocation.
3626 ENUM
3627   BFD_ARELOC_BFIN_COMP
3628 ENUMDOC
3629   ADI Blackfin arithmetic relocation.
3630 ENUM
3631   BFD_ARELOC_BFIN_PAGE
3632 ENUMDOC
3633   ADI Blackfin arithmetic relocation.
3634 ENUM
3635   BFD_ARELOC_BFIN_HWPAGE
3636 ENUMDOC
3637   ADI Blackfin arithmetic relocation.
3638 ENUM
3639   BFD_ARELOC_BFIN_ADDR
3640 ENUMDOC
3641   ADI Blackfin arithmetic relocation.
3642
3643 ENUM
3644   BFD_RELOC_D10V_10_PCREL_R
3645 ENUMDOC
3646   Mitsubishi D10V relocs.
3647   This is a 10-bit reloc with the right 2 bits
3648   assumed to be 0.
3649 ENUM
3650   BFD_RELOC_D10V_10_PCREL_L
3651 ENUMDOC
3652   Mitsubishi D10V relocs.
3653   This is a 10-bit reloc with the right 2 bits
3654   assumed to be 0.  This is the same as the previous reloc
3655   except it is in the left container, i.e.,
3656   shifted left 15 bits.
3657 ENUM
3658   BFD_RELOC_D10V_18
3659 ENUMDOC
3660   This is an 18-bit reloc with the right 2 bits
3661   assumed to be 0.
3662 ENUM
3663   BFD_RELOC_D10V_18_PCREL
3664 ENUMDOC
3665   This is an 18-bit reloc with the right 2 bits
3666   assumed to be 0.
3667
3668 ENUM
3669   BFD_RELOC_D30V_6
3670 ENUMDOC
3671   Mitsubishi D30V relocs.
3672   This is a 6-bit absolute reloc.
3673 ENUM
3674   BFD_RELOC_D30V_9_PCREL
3675 ENUMDOC
3676   This is a 6-bit pc-relative reloc with
3677   the right 3 bits assumed to be 0.
3678 ENUM
3679   BFD_RELOC_D30V_9_PCREL_R
3680 ENUMDOC
3681   This is a 6-bit pc-relative reloc with
3682   the right 3 bits assumed to be 0. Same
3683   as the previous reloc but on the right side
3684   of the container.
3685 ENUM
3686   BFD_RELOC_D30V_15
3687 ENUMDOC
3688   This is a 12-bit absolute reloc with the
3689   right 3 bitsassumed to be 0.
3690 ENUM
3691   BFD_RELOC_D30V_15_PCREL
3692 ENUMDOC
3693   This is a 12-bit pc-relative reloc with
3694   the right 3 bits assumed to be 0.
3695 ENUM
3696   BFD_RELOC_D30V_15_PCREL_R
3697 ENUMDOC
3698   This is a 12-bit pc-relative reloc with
3699   the right 3 bits assumed to be 0. Same
3700   as the previous reloc but on the right side
3701   of the container.
3702 ENUM
3703   BFD_RELOC_D30V_21
3704 ENUMDOC
3705   This is an 18-bit absolute reloc with
3706   the right 3 bits assumed to be 0.
3707 ENUM
3708   BFD_RELOC_D30V_21_PCREL
3709 ENUMDOC
3710   This is an 18-bit pc-relative reloc with
3711   the right 3 bits assumed to be 0.
3712 ENUM
3713   BFD_RELOC_D30V_21_PCREL_R
3714 ENUMDOC
3715   This is an 18-bit pc-relative reloc with
3716   the right 3 bits assumed to be 0. Same
3717   as the previous reloc but on the right side
3718   of the container.
3719 ENUM
3720   BFD_RELOC_D30V_32
3721 ENUMDOC
3722   This is a 32-bit absolute reloc.
3723 ENUM
3724   BFD_RELOC_D30V_32_PCREL
3725 ENUMDOC
3726   This is a 32-bit pc-relative reloc.
3727
3728 ENUM
3729   BFD_RELOC_DLX_HI16_S
3730 ENUMDOC
3731   DLX relocs
3732 ENUM
3733   BFD_RELOC_DLX_LO16
3734 ENUMDOC
3735   DLX relocs
3736 ENUM
3737   BFD_RELOC_DLX_JMP26
3738 ENUMDOC
3739   DLX relocs
3740
3741 ENUM
3742   BFD_RELOC_M32C_HI8
3743 ENUMX
3744   BFD_RELOC_M32C_RL_JUMP
3745 ENUMX
3746   BFD_RELOC_M32C_RL_1ADDR
3747 ENUMX
3748   BFD_RELOC_M32C_RL_2ADDR
3749 ENUMDOC
3750   Renesas M16C/M32C Relocations.
3751
3752 ENUM
3753   BFD_RELOC_M32R_24
3754 ENUMDOC
3755   Renesas M32R (formerly Mitsubishi M32R) relocs.
3756   This is a 24 bit absolute address.
3757 ENUM
3758   BFD_RELOC_M32R_10_PCREL
3759 ENUMDOC
3760   This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3761 ENUM
3762   BFD_RELOC_M32R_18_PCREL
3763 ENUMDOC
3764   This is an 18-bit reloc with the right 2 bits assumed to be 0.
3765 ENUM
3766   BFD_RELOC_M32R_26_PCREL
3767 ENUMDOC
3768   This is a 26-bit reloc with the right 2 bits assumed to be 0.
3769 ENUM
3770   BFD_RELOC_M32R_HI16_ULO
3771 ENUMDOC
3772   This is a 16-bit reloc containing the high 16 bits of an address
3773   used when the lower 16 bits are treated as unsigned.
3774 ENUM
3775   BFD_RELOC_M32R_HI16_SLO
3776 ENUMDOC
3777   This is a 16-bit reloc containing the high 16 bits of an address
3778   used when the lower 16 bits are treated as signed.
3779 ENUM
3780   BFD_RELOC_M32R_LO16
3781 ENUMDOC
3782   This is a 16-bit reloc containing the lower 16 bits of an address.
3783 ENUM
3784   BFD_RELOC_M32R_SDA16
3785 ENUMDOC
3786   This is a 16-bit reloc containing the small data area offset for use in
3787   add3, load, and store instructions.
3788 ENUM
3789   BFD_RELOC_M32R_GOT24
3790 ENUMX
3791   BFD_RELOC_M32R_26_PLTREL
3792 ENUMX
3793   BFD_RELOC_M32R_COPY
3794 ENUMX
3795   BFD_RELOC_M32R_GLOB_DAT
3796 ENUMX
3797   BFD_RELOC_M32R_JMP_SLOT
3798 ENUMX
3799   BFD_RELOC_M32R_RELATIVE
3800 ENUMX
3801   BFD_RELOC_M32R_GOTOFF
3802 ENUMX
3803   BFD_RELOC_M32R_GOTOFF_HI_ULO
3804 ENUMX
3805   BFD_RELOC_M32R_GOTOFF_HI_SLO
3806 ENUMX
3807   BFD_RELOC_M32R_GOTOFF_LO
3808 ENUMX
3809   BFD_RELOC_M32R_GOTPC24
3810 ENUMX
3811   BFD_RELOC_M32R_GOT16_HI_ULO
3812 ENUMX
3813   BFD_RELOC_M32R_GOT16_HI_SLO
3814 ENUMX
3815   BFD_RELOC_M32R_GOT16_LO
3816 ENUMX
3817   BFD_RELOC_M32R_GOTPC_HI_ULO
3818 ENUMX
3819   BFD_RELOC_M32R_GOTPC_HI_SLO
3820 ENUMX
3821   BFD_RELOC_M32R_GOTPC_LO
3822 ENUMDOC
3823   For PIC.
3824
3825
3826 ENUM
3827   BFD_RELOC_V850_9_PCREL
3828 ENUMDOC
3829   This is a 9-bit reloc
3830 ENUM
3831   BFD_RELOC_V850_22_PCREL
3832 ENUMDOC
3833   This is a 22-bit reloc
3834
3835 ENUM
3836   BFD_RELOC_V850_SDA_16_16_OFFSET
3837 ENUMDOC
3838   This is a 16 bit offset from the short data area pointer.
3839 ENUM
3840   BFD_RELOC_V850_SDA_15_16_OFFSET
3841 ENUMDOC
3842   This is a 16 bit offset (of which only 15 bits are used) from the
3843   short data area pointer.
3844 ENUM
3845   BFD_RELOC_V850_ZDA_16_16_OFFSET
3846 ENUMDOC
3847   This is a 16 bit offset from the zero data area pointer.
3848 ENUM
3849   BFD_RELOC_V850_ZDA_15_16_OFFSET
3850 ENUMDOC
3851   This is a 16 bit offset (of which only 15 bits are used) from the
3852   zero data area pointer.
3853 ENUM
3854   BFD_RELOC_V850_TDA_6_8_OFFSET
3855 ENUMDOC
3856   This is an 8 bit offset (of which only 6 bits are used) from the
3857   tiny data area pointer.
3858 ENUM
3859   BFD_RELOC_V850_TDA_7_8_OFFSET
3860 ENUMDOC
3861   This is an 8bit offset (of which only 7 bits are used) from the tiny
3862   data area pointer.
3863 ENUM
3864   BFD_RELOC_V850_TDA_7_7_OFFSET
3865 ENUMDOC
3866   This is a 7 bit offset from the tiny data area pointer.
3867 ENUM
3868   BFD_RELOC_V850_TDA_16_16_OFFSET
3869 ENUMDOC
3870   This is a 16 bit offset from the tiny data area pointer.
3871 COMMENT
3872 ENUM
3873   BFD_RELOC_V850_TDA_4_5_OFFSET
3874 ENUMDOC
3875   This is a 5 bit offset (of which only 4 bits are used) from the tiny
3876   data area pointer.
3877 ENUM
3878   BFD_RELOC_V850_TDA_4_4_OFFSET
3879 ENUMDOC
3880   This is a 4 bit offset from the tiny data area pointer.
3881 ENUM
3882   BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
3883 ENUMDOC
3884   This is a 16 bit offset from the short data area pointer, with the
3885   bits placed non-contiguously in the instruction.
3886 ENUM
3887   BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
3888 ENUMDOC
3889   This is a 16 bit offset from the zero data area pointer, with the
3890   bits placed non-contiguously in the instruction.
3891 ENUM
3892   BFD_RELOC_V850_CALLT_6_7_OFFSET
3893 ENUMDOC
3894   This is a 6 bit offset from the call table base pointer.
3895 ENUM
3896   BFD_RELOC_V850_CALLT_16_16_OFFSET
3897 ENUMDOC
3898   This is a 16 bit offset from the call table base pointer.
3899 ENUM
3900   BFD_RELOC_V850_LONGCALL
3901 ENUMDOC
3902   Used for relaxing indirect function calls.
3903 ENUM
3904   BFD_RELOC_V850_LONGJUMP
3905 ENUMDOC
3906   Used for relaxing indirect jumps.
3907 ENUM
3908   BFD_RELOC_V850_ALIGN
3909 ENUMDOC
3910   Used to maintain alignment whilst relaxing.
3911 ENUM
3912   BFD_RELOC_V850_LO16_SPLIT_OFFSET
3913 ENUMDOC
3914   This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
3915   instructions.
3916 ENUM
3917   BFD_RELOC_V850_16_PCREL
3918 ENUMDOC
3919   This is a 16-bit reloc.
3920 ENUM
3921   BFD_RELOC_V850_17_PCREL
3922 ENUMDOC
3923   This is a 17-bit reloc.
3924 ENUM
3925   BFD_RELOC_V850_23
3926 ENUMDOC
3927   This is a 23-bit reloc.
3928 ENUM
3929   BFD_RELOC_V850_32_PCREL
3930 ENUMDOC
3931   This is a 32-bit reloc.
3932 ENUM
3933   BFD_RELOC_V850_32_ABS
3934 ENUMDOC
3935   This is a 32-bit reloc.
3936 ENUM
3937   BFD_RELOC_V850_16_SPLIT_OFFSET
3938 ENUMDOC
3939   This is a 16-bit reloc.
3940 ENUM
3941   BFD_RELOC_V850_16_S1
3942 ENUMDOC
3943   This is a 16-bit reloc.
3944 ENUM
3945   BFD_RELOC_V850_LO16_S1
3946 ENUMDOC
3947   Low 16 bits. 16 bit shifted by 1.
3948 ENUM
3949   BFD_RELOC_V850_CALLT_15_16_OFFSET
3950 ENUMDOC
3951   This is a 16 bit offset from the call table base pointer.
3952 ENUM
3953   BFD_RELOC_V850_32_GOTPCREL
3954 ENUMDOC
3955   DSO relocations.
3956 ENUM
3957   BFD_RELOC_V850_16_GOT
3958 ENUMDOC
3959   DSO relocations.
3960 ENUM
3961   BFD_RELOC_V850_32_GOT
3962 ENUMDOC
3963   DSO relocations.
3964 ENUM
3965   BFD_RELOC_V850_22_PLT_PCREL
3966 ENUMDOC
3967   DSO relocations.
3968 ENUM
3969   BFD_RELOC_V850_32_PLT_PCREL
3970 ENUMDOC
3971   DSO relocations.
3972 ENUM
3973   BFD_RELOC_V850_COPY
3974 ENUMDOC
3975   DSO relocations.
3976 ENUM
3977   BFD_RELOC_V850_GLOB_DAT
3978 ENUMDOC
3979   DSO relocations.
3980 ENUM
3981   BFD_RELOC_V850_JMP_SLOT
3982 ENUMDOC
3983   DSO relocations.
3984 ENUM
3985   BFD_RELOC_V850_RELATIVE
3986 ENUMDOC
3987   DSO relocations.
3988 ENUM
3989   BFD_RELOC_V850_16_GOTOFF
3990 ENUMDOC
3991   DSO relocations.
3992 ENUM
3993   BFD_RELOC_V850_32_GOTOFF
3994 ENUMDOC
3995   DSO relocations.
3996 ENUM
3997   BFD_RELOC_V850_CODE
3998 ENUMDOC
3999   start code.
4000 ENUM
4001   BFD_RELOC_V850_DATA
4002 ENUMDOC
4003   start data in text.
4004
4005 ENUM
4006   BFD_RELOC_TIC30_LDP
4007 ENUMDOC
4008   This is a 8bit DP reloc for the tms320c30, where the most
4009   significant 8 bits of a 24 bit word are placed into the least
4010   significant 8 bits of the opcode.
4011
4012 ENUM
4013   BFD_RELOC_TIC54X_PARTLS7
4014 ENUMDOC
4015   This is a 7bit reloc for the tms320c54x, where the least
4016   significant 7 bits of a 16 bit word are placed into the least
4017   significant 7 bits of the opcode.
4018
4019 ENUM
4020   BFD_RELOC_TIC54X_PARTMS9
4021 ENUMDOC
4022   This is a 9bit DP reloc for the tms320c54x, where the most
4023   significant 9 bits of a 16 bit word are placed into the least
4024   significant 9 bits of the opcode.
4025
4026 ENUM
4027   BFD_RELOC_TIC54X_23
4028 ENUMDOC
4029   This is an extended address 23-bit reloc for the tms320c54x.
4030
4031 ENUM
4032   BFD_RELOC_TIC54X_16_OF_23
4033 ENUMDOC
4034   This is a 16-bit reloc for the tms320c54x, where the least
4035   significant 16 bits of a 23-bit extended address are placed into
4036   the opcode.
4037
4038 ENUM
4039   BFD_RELOC_TIC54X_MS7_OF_23
4040 ENUMDOC
4041   This is a reloc for the tms320c54x, where the most
4042   significant 7 bits of a 23-bit extended address are placed into
4043   the opcode.
4044
4045 ENUM
4046   BFD_RELOC_C6000_PCR_S21
4047 ENUMX
4048   BFD_RELOC_C6000_PCR_S12
4049 ENUMX
4050   BFD_RELOC_C6000_PCR_S10
4051 ENUMX
4052   BFD_RELOC_C6000_PCR_S7
4053 ENUMX
4054   BFD_RELOC_C6000_ABS_S16
4055 ENUMX
4056   BFD_RELOC_C6000_ABS_L16
4057 ENUMX
4058   BFD_RELOC_C6000_ABS_H16
4059 ENUMX
4060   BFD_RELOC_C6000_SBR_U15_B
4061 ENUMX
4062   BFD_RELOC_C6000_SBR_U15_H
4063 ENUMX
4064   BFD_RELOC_C6000_SBR_U15_W
4065 ENUMX
4066   BFD_RELOC_C6000_SBR_S16
4067 ENUMX
4068   BFD_RELOC_C6000_SBR_L16_B
4069 ENUMX
4070   BFD_RELOC_C6000_SBR_L16_H
4071 ENUMX
4072   BFD_RELOC_C6000_SBR_L16_W
4073 ENUMX
4074   BFD_RELOC_C6000_SBR_H16_B
4075 ENUMX
4076   BFD_RELOC_C6000_SBR_H16_H
4077 ENUMX
4078   BFD_RELOC_C6000_SBR_H16_W
4079 ENUMX
4080   BFD_RELOC_C6000_SBR_GOT_U15_W
4081 ENUMX
4082   BFD_RELOC_C6000_SBR_GOT_L16_W
4083 ENUMX
4084   BFD_RELOC_C6000_SBR_GOT_H16_W
4085 ENUMX
4086   BFD_RELOC_C6000_DSBT_INDEX
4087 ENUMX
4088   BFD_RELOC_C6000_PREL31
4089 ENUMX
4090   BFD_RELOC_C6000_COPY
4091 ENUMX
4092   BFD_RELOC_C6000_JUMP_SLOT
4093 ENUMX
4094   BFD_RELOC_C6000_EHTYPE
4095 ENUMX
4096   BFD_RELOC_C6000_PCR_H16
4097 ENUMX
4098   BFD_RELOC_C6000_PCR_L16
4099 ENUMX
4100   BFD_RELOC_C6000_ALIGN
4101 ENUMX
4102   BFD_RELOC_C6000_FPHEAD
4103 ENUMX
4104   BFD_RELOC_C6000_NOCMP
4105 ENUMDOC
4106   TMS320C6000 relocations.
4107
4108 ENUM
4109   BFD_RELOC_FR30_48
4110 ENUMDOC
4111   This is a 48 bit reloc for the FR30 that stores 32 bits.
4112 ENUM
4113   BFD_RELOC_FR30_20
4114 ENUMDOC
4115   This is a 32 bit reloc for the FR30 that stores 20 bits split up into
4116   two sections.
4117 ENUM
4118   BFD_RELOC_FR30_6_IN_4
4119 ENUMDOC
4120   This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
4121   4 bits.
4122 ENUM
4123   BFD_RELOC_FR30_8_IN_8
4124 ENUMDOC
4125   This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
4126   into 8 bits.
4127 ENUM
4128   BFD_RELOC_FR30_9_IN_8
4129 ENUMDOC
4130   This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
4131   into 8 bits.
4132 ENUM
4133   BFD_RELOC_FR30_10_IN_8
4134 ENUMDOC
4135   This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
4136   into 8 bits.
4137 ENUM
4138   BFD_RELOC_FR30_9_PCREL
4139 ENUMDOC
4140   This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
4141   short offset into 8 bits.
4142 ENUM
4143   BFD_RELOC_FR30_12_PCREL
4144 ENUMDOC
4145   This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
4146   short offset into 11 bits.
4147
4148 ENUM
4149   BFD_RELOC_MCORE_PCREL_IMM8BY4
4150 ENUMX
4151   BFD_RELOC_MCORE_PCREL_IMM11BY2
4152 ENUMX
4153   BFD_RELOC_MCORE_PCREL_IMM4BY2
4154 ENUMX
4155   BFD_RELOC_MCORE_PCREL_32
4156 ENUMX
4157   BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
4158 ENUMX
4159   BFD_RELOC_MCORE_RVA
4160 ENUMDOC
4161   Motorola Mcore relocations.
4162
4163 ENUM
4164   BFD_RELOC_MEP_8
4165 ENUMX
4166   BFD_RELOC_MEP_16
4167 ENUMX
4168   BFD_RELOC_MEP_32
4169 ENUMX
4170   BFD_RELOC_MEP_PCREL8A2
4171 ENUMX
4172   BFD_RELOC_MEP_PCREL12A2
4173 ENUMX
4174   BFD_RELOC_MEP_PCREL17A2
4175 ENUMX
4176   BFD_RELOC_MEP_PCREL24A2
4177 ENUMX
4178   BFD_RELOC_MEP_PCABS24A2
4179 ENUMX
4180   BFD_RELOC_MEP_LOW16
4181 ENUMX
4182   BFD_RELOC_MEP_HI16U
4183 ENUMX
4184   BFD_RELOC_MEP_HI16S
4185 ENUMX
4186   BFD_RELOC_MEP_GPREL
4187 ENUMX
4188   BFD_RELOC_MEP_TPREL
4189 ENUMX
4190   BFD_RELOC_MEP_TPREL7
4191 ENUMX
4192   BFD_RELOC_MEP_TPREL7A2
4193 ENUMX
4194   BFD_RELOC_MEP_TPREL7A4
4195 ENUMX
4196   BFD_RELOC_MEP_UIMM24
4197 ENUMX
4198   BFD_RELOC_MEP_ADDR24A4
4199 ENUMX
4200   BFD_RELOC_MEP_GNU_VTINHERIT
4201 ENUMX
4202   BFD_RELOC_MEP_GNU_VTENTRY
4203 ENUMDOC
4204   Toshiba Media Processor Relocations.
4205 COMMENT
4206
4207 ENUM
4208   BFD_RELOC_METAG_HIADDR16
4209 ENUMX
4210   BFD_RELOC_METAG_LOADDR16
4211 ENUMX
4212   BFD_RELOC_METAG_RELBRANCH
4213 ENUMX
4214   BFD_RELOC_METAG_GETSETOFF
4215 ENUMX
4216   BFD_RELOC_METAG_HIOG
4217 ENUMX
4218   BFD_RELOC_METAG_LOOG
4219 ENUMX
4220   BFD_RELOC_METAG_REL8
4221 ENUMX
4222   BFD_RELOC_METAG_REL16
4223 ENUMX
4224   BFD_RELOC_METAG_HI16_GOTOFF
4225 ENUMX
4226   BFD_RELOC_METAG_LO16_GOTOFF
4227 ENUMX
4228   BFD_RELOC_METAG_GETSET_GOTOFF
4229 ENUMX
4230   BFD_RELOC_METAG_GETSET_GOT
4231 ENUMX
4232   BFD_RELOC_METAG_HI16_GOTPC
4233 ENUMX
4234   BFD_RELOC_METAG_LO16_GOTPC
4235 ENUMX
4236   BFD_RELOC_METAG_HI16_PLT
4237 ENUMX
4238   BFD_RELOC_METAG_LO16_PLT
4239 ENUMX
4240   BFD_RELOC_METAG_RELBRANCH_PLT
4241 ENUMX
4242   BFD_RELOC_METAG_GOTOFF
4243 ENUMX
4244   BFD_RELOC_METAG_PLT
4245 ENUMX
4246   BFD_RELOC_METAG_COPY
4247 ENUMX
4248   BFD_RELOC_METAG_JMP_SLOT
4249 ENUMX
4250   BFD_RELOC_METAG_RELATIVE
4251 ENUMX
4252   BFD_RELOC_METAG_GLOB_DAT
4253 ENUMX
4254   BFD_RELOC_METAG_TLS_GD
4255 ENUMX
4256   BFD_RELOC_METAG_TLS_LDM
4257 ENUMX
4258   BFD_RELOC_METAG_TLS_LDO_HI16
4259 ENUMX
4260   BFD_RELOC_METAG_TLS_LDO_LO16
4261 ENUMX
4262   BFD_RELOC_METAG_TLS_LDO
4263 ENUMX
4264   BFD_RELOC_METAG_TLS_IE
4265 ENUMX
4266   BFD_RELOC_METAG_TLS_IENONPIC
4267 ENUMX
4268   BFD_RELOC_METAG_TLS_IENONPIC_HI16
4269 ENUMX
4270   BFD_RELOC_METAG_TLS_IENONPIC_LO16
4271 ENUMX
4272   BFD_RELOC_METAG_TLS_TPOFF
4273 ENUMX
4274   BFD_RELOC_METAG_TLS_DTPMOD
4275 ENUMX
4276   BFD_RELOC_METAG_TLS_DTPOFF
4277 ENUMX
4278   BFD_RELOC_METAG_TLS_LE
4279 ENUMX
4280   BFD_RELOC_METAG_TLS_LE_HI16
4281 ENUMX
4282   BFD_RELOC_METAG_TLS_LE_LO16
4283 ENUMDOC
4284   Imagination Technologies Meta relocations.
4285
4286 ENUM
4287   BFD_RELOC_MMIX_GETA
4288 ENUMX
4289   BFD_RELOC_MMIX_GETA_1
4290 ENUMX
4291   BFD_RELOC_MMIX_GETA_2
4292 ENUMX
4293   BFD_RELOC_MMIX_GETA_3
4294 ENUMDOC
4295   These are relocations for the GETA instruction.
4296 ENUM
4297   BFD_RELOC_MMIX_CBRANCH
4298 ENUMX
4299   BFD_RELOC_MMIX_CBRANCH_J
4300 ENUMX
4301   BFD_RELOC_MMIX_CBRANCH_1
4302 ENUMX
4303   BFD_RELOC_MMIX_CBRANCH_2
4304 ENUMX
4305   BFD_RELOC_MMIX_CBRANCH_3
4306 ENUMDOC
4307   These are relocations for a conditional branch instruction.
4308 ENUM
4309   BFD_RELOC_MMIX_PUSHJ
4310 ENUMX
4311   BFD_RELOC_MMIX_PUSHJ_1
4312 ENUMX
4313   BFD_RELOC_MMIX_PUSHJ_2
4314 ENUMX
4315   BFD_RELOC_MMIX_PUSHJ_3
4316 ENUMX
4317   BFD_RELOC_MMIX_PUSHJ_STUBBABLE
4318 ENUMDOC
4319   These are relocations for the PUSHJ instruction.
4320 ENUM
4321   BFD_RELOC_MMIX_JMP
4322 ENUMX
4323   BFD_RELOC_MMIX_JMP_1
4324 ENUMX
4325   BFD_RELOC_MMIX_JMP_2
4326 ENUMX
4327   BFD_RELOC_MMIX_JMP_3
4328 ENUMDOC
4329   These are relocations for the JMP instruction.
4330 ENUM
4331   BFD_RELOC_MMIX_ADDR19
4332 ENUMDOC
4333   This is a relocation for a relative address as in a GETA instruction or
4334   a branch.
4335 ENUM
4336   BFD_RELOC_MMIX_ADDR27
4337 ENUMDOC
4338   This is a relocation for a relative address as in a JMP instruction.
4339 ENUM
4340   BFD_RELOC_MMIX_REG_OR_BYTE
4341 ENUMDOC
4342   This is a relocation for an instruction field that may be a general
4343   register or a value 0..255.
4344 ENUM
4345   BFD_RELOC_MMIX_REG
4346 ENUMDOC
4347   This is a relocation for an instruction field that may be a general
4348   register.
4349 ENUM
4350   BFD_RELOC_MMIX_BASE_PLUS_OFFSET
4351 ENUMDOC
4352   This is a relocation for two instruction fields holding a register and
4353   an offset, the equivalent of the relocation.
4354 ENUM
4355   BFD_RELOC_MMIX_LOCAL
4356 ENUMDOC
4357   This relocation is an assertion that the expression is not allocated as
4358   a global register.  It does not modify contents.
4359
4360 ENUM
4361   BFD_RELOC_AVR_7_PCREL
4362 ENUMDOC
4363   This is a 16 bit reloc for the AVR that stores 8 bit pc relative
4364   short offset into 7 bits.
4365 ENUM
4366   BFD_RELOC_AVR_13_PCREL
4367 ENUMDOC
4368   This is a 16 bit reloc for the AVR that stores 13 bit pc relative
4369   short offset into 12 bits.
4370 ENUM
4371   BFD_RELOC_AVR_16_PM
4372 ENUMDOC
4373   This is a 16 bit reloc for the AVR that stores 17 bit value (usually
4374   program memory address) into 16 bits.
4375 ENUM
4376   BFD_RELOC_AVR_LO8_LDI
4377 ENUMDOC
4378   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4379   data memory address) into 8 bit immediate value of LDI insn.
4380 ENUM
4381   BFD_RELOC_AVR_HI8_LDI
4382 ENUMDOC
4383   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4384   of data memory address) into 8 bit immediate value of LDI insn.
4385 ENUM
4386   BFD_RELOC_AVR_HH8_LDI
4387 ENUMDOC
4388   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4389   of program memory address) into 8 bit immediate value of LDI insn.
4390 ENUM
4391   BFD_RELOC_AVR_MS8_LDI
4392 ENUMDOC
4393   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4394   of 32 bit value) into 8 bit immediate value of LDI insn.
4395 ENUM
4396   BFD_RELOC_AVR_LO8_LDI_NEG
4397 ENUMDOC
4398   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4399   (usually data memory address) into 8 bit immediate value of SUBI insn.
4400 ENUM
4401   BFD_RELOC_AVR_HI8_LDI_NEG
4402 ENUMDOC
4403   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4404   (high 8 bit of data memory address) into 8 bit immediate value of
4405   SUBI insn.
4406 ENUM
4407   BFD_RELOC_AVR_HH8_LDI_NEG
4408 ENUMDOC
4409   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4410   (most high 8 bit of program memory address) into 8 bit immediate value
4411   of LDI or SUBI insn.
4412 ENUM
4413   BFD_RELOC_AVR_MS8_LDI_NEG
4414 ENUMDOC
4415   This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
4416   of 32 bit value) into 8 bit immediate value of LDI insn.
4417 ENUM
4418   BFD_RELOC_AVR_LO8_LDI_PM
4419 ENUMDOC
4420   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4421   command address) into 8 bit immediate value of LDI insn.
4422 ENUM
4423   BFD_RELOC_AVR_LO8_LDI_GS
4424 ENUMDOC
4425   This is a 16 bit reloc for the AVR that stores 8 bit value
4426   (command address) into 8 bit immediate value of LDI insn. If the address
4427   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4428   in the lower 128k.
4429 ENUM
4430   BFD_RELOC_AVR_HI8_LDI_PM
4431 ENUMDOC
4432   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4433   of command address) into 8 bit immediate value of LDI insn.
4434 ENUM
4435   BFD_RELOC_AVR_HI8_LDI_GS
4436 ENUMDOC
4437   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4438   of command address) into 8 bit immediate value of LDI insn.  If the address
4439   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4440   below 128k.
4441 ENUM
4442   BFD_RELOC_AVR_HH8_LDI_PM
4443 ENUMDOC
4444   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4445   of command address) into 8 bit immediate value of LDI insn.
4446 ENUM
4447   BFD_RELOC_AVR_LO8_LDI_PM_NEG
4448 ENUMDOC
4449   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4450   (usually command address) into 8 bit immediate value of SUBI insn.
4451 ENUM
4452   BFD_RELOC_AVR_HI8_LDI_PM_NEG
4453 ENUMDOC
4454   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4455   (high 8 bit of 16 bit command address) into 8 bit immediate value
4456   of SUBI insn.
4457 ENUM
4458   BFD_RELOC_AVR_HH8_LDI_PM_NEG
4459 ENUMDOC
4460   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4461   (high 6 bit of 22 bit command address) into 8 bit immediate
4462   value of SUBI insn.
4463 ENUM
4464   BFD_RELOC_AVR_CALL
4465 ENUMDOC
4466   This is a 32 bit reloc for the AVR that stores 23 bit value
4467   into 22 bits.
4468 ENUM
4469   BFD_RELOC_AVR_LDI
4470 ENUMDOC
4471   This is a 16 bit reloc for the AVR that stores all needed bits
4472   for absolute addressing with ldi with overflow check to linktime
4473 ENUM
4474   BFD_RELOC_AVR_6
4475 ENUMDOC
4476   This is a 6 bit reloc for the AVR that stores offset for ldd/std
4477   instructions
4478 ENUM
4479   BFD_RELOC_AVR_6_ADIW
4480 ENUMDOC
4481   This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
4482   instructions
4483 ENUM
4484   BFD_RELOC_AVR_8_LO
4485 ENUMDOC
4486   This is a 8 bit reloc for the AVR that stores bits 0..7 of a symbol
4487   in .byte lo8(symbol)
4488 ENUM
4489   BFD_RELOC_AVR_8_HI
4490 ENUMDOC
4491   This is a 8 bit reloc for the AVR that stores bits 8..15 of a symbol
4492   in .byte hi8(symbol)
4493 ENUM
4494   BFD_RELOC_AVR_8_HLO
4495 ENUMDOC
4496   This is a 8 bit reloc for the AVR that stores bits 16..23 of a symbol
4497   in .byte hlo8(symbol)
4498
4499 ENUM
4500   BFD_RELOC_RL78_NEG8
4501 ENUMX
4502   BFD_RELOC_RL78_NEG16
4503 ENUMX
4504   BFD_RELOC_RL78_NEG24
4505 ENUMX
4506   BFD_RELOC_RL78_NEG32
4507 ENUMX
4508   BFD_RELOC_RL78_16_OP
4509 ENUMX
4510   BFD_RELOC_RL78_24_OP
4511 ENUMX
4512   BFD_RELOC_RL78_32_OP
4513 ENUMX
4514   BFD_RELOC_RL78_8U
4515 ENUMX
4516   BFD_RELOC_RL78_16U
4517 ENUMX
4518   BFD_RELOC_RL78_24U
4519 ENUMX
4520   BFD_RELOC_RL78_DIR3U_PCREL
4521 ENUMX
4522   BFD_RELOC_RL78_DIFF
4523 ENUMX
4524   BFD_RELOC_RL78_GPRELB
4525 ENUMX
4526   BFD_RELOC_RL78_GPRELW
4527 ENUMX
4528   BFD_RELOC_RL78_GPRELL
4529 ENUMX
4530   BFD_RELOC_RL78_SYM
4531 ENUMX
4532   BFD_RELOC_RL78_OP_SUBTRACT
4533 ENUMX
4534   BFD_RELOC_RL78_OP_NEG
4535 ENUMX
4536   BFD_RELOC_RL78_OP_AND
4537 ENUMX
4538   BFD_RELOC_RL78_OP_SHRA
4539 ENUMX
4540   BFD_RELOC_RL78_ABS8
4541 ENUMX
4542   BFD_RELOC_RL78_ABS16
4543 ENUMX
4544   BFD_RELOC_RL78_ABS16_REV
4545 ENUMX
4546   BFD_RELOC_RL78_ABS32
4547 ENUMX
4548   BFD_RELOC_RL78_ABS32_REV
4549 ENUMX
4550   BFD_RELOC_RL78_ABS16U
4551 ENUMX
4552   BFD_RELOC_RL78_ABS16UW
4553 ENUMX
4554   BFD_RELOC_RL78_ABS16UL
4555 ENUMX
4556   BFD_RELOC_RL78_RELAX
4557 ENUMX
4558   BFD_RELOC_RL78_HI16
4559 ENUMX
4560   BFD_RELOC_RL78_HI8
4561 ENUMX
4562   BFD_RELOC_RL78_LO16
4563 ENUMDOC
4564   Renesas RL78 Relocations.
4565
4566 ENUM
4567   BFD_RELOC_RX_NEG8
4568 ENUMX
4569   BFD_RELOC_RX_NEG16
4570 ENUMX
4571   BFD_RELOC_RX_NEG24
4572 ENUMX
4573   BFD_RELOC_RX_NEG32
4574 ENUMX
4575   BFD_RELOC_RX_16_OP
4576 ENUMX
4577   BFD_RELOC_RX_24_OP
4578 ENUMX
4579   BFD_RELOC_RX_32_OP
4580 ENUMX
4581   BFD_RELOC_RX_8U
4582 ENUMX
4583   BFD_RELOC_RX_16U
4584 ENUMX
4585   BFD_RELOC_RX_24U
4586 ENUMX
4587   BFD_RELOC_RX_DIR3U_PCREL
4588 ENUMX
4589   BFD_RELOC_RX_DIFF
4590 ENUMX
4591   BFD_RELOC_RX_GPRELB
4592 ENUMX
4593   BFD_RELOC_RX_GPRELW
4594 ENUMX
4595   BFD_RELOC_RX_GPRELL
4596 ENUMX
4597   BFD_RELOC_RX_SYM
4598 ENUMX
4599   BFD_RELOC_RX_OP_SUBTRACT
4600 ENUMX
4601   BFD_RELOC_RX_OP_NEG
4602 ENUMX
4603   BFD_RELOC_RX_ABS8
4604 ENUMX
4605   BFD_RELOC_RX_ABS16
4606 ENUMX
4607   BFD_RELOC_RX_ABS16_REV
4608 ENUMX
4609   BFD_RELOC_RX_ABS32
4610 ENUMX
4611   BFD_RELOC_RX_ABS32_REV
4612 ENUMX
4613   BFD_RELOC_RX_ABS16U
4614 ENUMX
4615   BFD_RELOC_RX_ABS16UW
4616 ENUMX
4617   BFD_RELOC_RX_ABS16UL
4618 ENUMX
4619   BFD_RELOC_RX_RELAX
4620 ENUMDOC
4621   Renesas RX Relocations.
4622
4623 ENUM
4624   BFD_RELOC_390_12
4625 ENUMDOC
4626    Direct 12 bit.
4627 ENUM
4628   BFD_RELOC_390_GOT12
4629 ENUMDOC
4630   12 bit GOT offset.
4631 ENUM
4632   BFD_RELOC_390_PLT32
4633 ENUMDOC
4634   32 bit PC relative PLT address.
4635 ENUM
4636   BFD_RELOC_390_COPY
4637 ENUMDOC
4638   Copy symbol at runtime.
4639 ENUM
4640   BFD_RELOC_390_GLOB_DAT
4641 ENUMDOC
4642   Create GOT entry.
4643 ENUM
4644   BFD_RELOC_390_JMP_SLOT
4645 ENUMDOC
4646   Create PLT entry.
4647 ENUM
4648   BFD_RELOC_390_RELATIVE
4649 ENUMDOC
4650   Adjust by program base.
4651 ENUM
4652   BFD_RELOC_390_GOTPC
4653 ENUMDOC
4654   32 bit PC relative offset to GOT.
4655 ENUM
4656   BFD_RELOC_390_GOT16
4657 ENUMDOC
4658   16 bit GOT offset.
4659 ENUM
4660   BFD_RELOC_390_PC16DBL
4661 ENUMDOC
4662   PC relative 16 bit shifted by 1.
4663 ENUM
4664   BFD_RELOC_390_PLT16DBL
4665 ENUMDOC
4666   16 bit PC rel. PLT shifted by 1.
4667 ENUM
4668   BFD_RELOC_390_PC32DBL
4669 ENUMDOC
4670   PC relative 32 bit shifted by 1.
4671 ENUM
4672   BFD_RELOC_390_PLT32DBL
4673 ENUMDOC
4674   32 bit PC rel. PLT shifted by 1.
4675 ENUM
4676   BFD_RELOC_390_GOTPCDBL
4677 ENUMDOC
4678   32 bit PC rel. GOT shifted by 1.
4679 ENUM
4680   BFD_RELOC_390_GOT64
4681 ENUMDOC
4682   64 bit GOT offset.
4683 ENUM
4684   BFD_RELOC_390_PLT64
4685 ENUMDOC
4686   64 bit PC relative PLT address.
4687 ENUM
4688   BFD_RELOC_390_GOTENT
4689 ENUMDOC
4690   32 bit rel. offset to GOT entry.
4691 ENUM
4692   BFD_RELOC_390_GOTOFF64
4693 ENUMDOC
4694   64 bit offset to GOT.
4695 ENUM
4696   BFD_RELOC_390_GOTPLT12
4697 ENUMDOC
4698   12-bit offset to symbol-entry within GOT, with PLT handling.
4699 ENUM
4700   BFD_RELOC_390_GOTPLT16
4701 ENUMDOC
4702   16-bit offset to symbol-entry within GOT, with PLT handling.
4703 ENUM
4704   BFD_RELOC_390_GOTPLT32
4705 ENUMDOC
4706   32-bit offset to symbol-entry within GOT, with PLT handling.
4707 ENUM
4708   BFD_RELOC_390_GOTPLT64
4709 ENUMDOC
4710   64-bit offset to symbol-entry within GOT, with PLT handling.
4711 ENUM
4712   BFD_RELOC_390_GOTPLTENT
4713 ENUMDOC
4714   32-bit rel. offset to symbol-entry within GOT, with PLT handling.
4715 ENUM
4716   BFD_RELOC_390_PLTOFF16
4717 ENUMDOC
4718   16-bit rel. offset from the GOT to a PLT entry.
4719 ENUM
4720   BFD_RELOC_390_PLTOFF32
4721 ENUMDOC
4722   32-bit rel. offset from the GOT to a PLT entry.
4723 ENUM
4724   BFD_RELOC_390_PLTOFF64
4725 ENUMDOC
4726   64-bit rel. offset from the GOT to a PLT entry.
4727
4728 ENUM
4729   BFD_RELOC_390_TLS_LOAD
4730 ENUMX
4731   BFD_RELOC_390_TLS_GDCALL
4732 ENUMX
4733   BFD_RELOC_390_TLS_LDCALL
4734 ENUMX
4735   BFD_RELOC_390_TLS_GD32
4736 ENUMX
4737   BFD_RELOC_390_TLS_GD64
4738 ENUMX
4739   BFD_RELOC_390_TLS_GOTIE12
4740 ENUMX
4741   BFD_RELOC_390_TLS_GOTIE32
4742 ENUMX
4743   BFD_RELOC_390_TLS_GOTIE64
4744 ENUMX
4745   BFD_RELOC_390_TLS_LDM32
4746 ENUMX
4747   BFD_RELOC_390_TLS_LDM64
4748 ENUMX
4749   BFD_RELOC_390_TLS_IE32
4750 ENUMX
4751   BFD_RELOC_390_TLS_IE64
4752 ENUMX
4753   BFD_RELOC_390_TLS_IEENT
4754 ENUMX
4755   BFD_RELOC_390_TLS_LE32
4756 ENUMX
4757   BFD_RELOC_390_TLS_LE64
4758 ENUMX
4759   BFD_RELOC_390_TLS_LDO32
4760 ENUMX
4761   BFD_RELOC_390_TLS_LDO64
4762 ENUMX
4763   BFD_RELOC_390_TLS_DTPMOD
4764 ENUMX
4765   BFD_RELOC_390_TLS_DTPOFF
4766 ENUMX
4767   BFD_RELOC_390_TLS_TPOFF
4768 ENUMDOC
4769   s390 tls relocations.
4770
4771 ENUM
4772   BFD_RELOC_390_20
4773 ENUMX
4774   BFD_RELOC_390_GOT20
4775 ENUMX
4776   BFD_RELOC_390_GOTPLT20
4777 ENUMX
4778   BFD_RELOC_390_TLS_GOTIE20
4779 ENUMDOC
4780   Long displacement extension.
4781
4782 ENUM
4783   BFD_RELOC_390_IRELATIVE
4784 ENUMDOC
4785   STT_GNU_IFUNC relocation.
4786
4787 ENUM
4788   BFD_RELOC_SCORE_GPREL15
4789 ENUMDOC
4790   Score relocations
4791   Low 16 bit for load/store
4792 ENUM
4793   BFD_RELOC_SCORE_DUMMY2
4794 ENUMX
4795   BFD_RELOC_SCORE_JMP
4796 ENUMDOC
4797   This is a 24-bit reloc with the right 1 bit assumed to be 0
4798 ENUM
4799   BFD_RELOC_SCORE_BRANCH
4800 ENUMDOC
4801   This is a 19-bit reloc with the right 1 bit assumed to be 0
4802 ENUM
4803   BFD_RELOC_SCORE_IMM30
4804 ENUMDOC
4805   This is a 32-bit reloc for 48-bit instructions.
4806 ENUM
4807   BFD_RELOC_SCORE_IMM32
4808 ENUMDOC
4809   This is a 32-bit reloc for 48-bit instructions.
4810 ENUM
4811   BFD_RELOC_SCORE16_JMP
4812 ENUMDOC
4813   This is a 11-bit reloc with the right 1 bit assumed to be 0
4814 ENUM
4815   BFD_RELOC_SCORE16_BRANCH
4816 ENUMDOC
4817   This is a 8-bit reloc with the right 1 bit assumed to be 0
4818 ENUM
4819   BFD_RELOC_SCORE_BCMP
4820 ENUMDOC
4821    This is a 9-bit reloc with the right 1 bit assumed to be 0
4822 ENUM
4823   BFD_RELOC_SCORE_GOT15
4824 ENUMX
4825   BFD_RELOC_SCORE_GOT_LO16
4826 ENUMX
4827   BFD_RELOC_SCORE_CALL15
4828 ENUMX
4829   BFD_RELOC_SCORE_DUMMY_HI16
4830 ENUMDOC
4831   Undocumented Score relocs
4832
4833 ENUM
4834   BFD_RELOC_IP2K_FR9
4835 ENUMDOC
4836   Scenix IP2K - 9-bit register number / data address
4837 ENUM
4838   BFD_RELOC_IP2K_BANK
4839 ENUMDOC
4840   Scenix IP2K - 4-bit register/data bank number
4841 ENUM
4842   BFD_RELOC_IP2K_ADDR16CJP
4843 ENUMDOC
4844   Scenix IP2K - low 13 bits of instruction word address
4845 ENUM
4846   BFD_RELOC_IP2K_PAGE3
4847 ENUMDOC
4848   Scenix IP2K - high 3 bits of instruction word address
4849 ENUM
4850   BFD_RELOC_IP2K_LO8DATA
4851 ENUMX
4852   BFD_RELOC_IP2K_HI8DATA
4853 ENUMX
4854   BFD_RELOC_IP2K_EX8DATA
4855 ENUMDOC
4856   Scenix IP2K - ext/low/high 8 bits of data address
4857 ENUM
4858   BFD_RELOC_IP2K_LO8INSN
4859 ENUMX
4860   BFD_RELOC_IP2K_HI8INSN
4861 ENUMDOC
4862   Scenix IP2K - low/high 8 bits of instruction word address
4863 ENUM
4864   BFD_RELOC_IP2K_PC_SKIP
4865 ENUMDOC
4866   Scenix IP2K - even/odd PC modifier to modify snb pcl.0
4867 ENUM
4868   BFD_RELOC_IP2K_TEXT
4869 ENUMDOC
4870   Scenix IP2K - 16 bit word address in text section.
4871 ENUM
4872   BFD_RELOC_IP2K_FR_OFFSET
4873 ENUMDOC
4874   Scenix IP2K - 7-bit sp or dp offset
4875 ENUM
4876   BFD_RELOC_VPE4KMATH_DATA
4877 ENUMX
4878   BFD_RELOC_VPE4KMATH_INSN
4879 ENUMDOC
4880   Scenix VPE4K coprocessor - data/insn-space addressing
4881
4882 ENUM
4883   BFD_RELOC_VTABLE_INHERIT
4884 ENUMX
4885   BFD_RELOC_VTABLE_ENTRY
4886 ENUMDOC
4887   These two relocations are used by the linker to determine which of
4888   the entries in a C++ virtual function table are actually used.  When
4889   the --gc-sections option is given, the linker will zero out the entries
4890   that are not used, so that the code for those functions need not be
4891   included in the output.
4892
4893   VTABLE_INHERIT is a zero-space relocation used to describe to the
4894   linker the inheritance tree of a C++ virtual function table.  The
4895   relocation's symbol should be the parent class' vtable, and the
4896   relocation should be located at the child vtable.
4897
4898   VTABLE_ENTRY is a zero-space relocation that describes the use of a
4899   virtual function table entry.  The reloc's symbol should refer to the
4900   table of the class mentioned in the code.  Off of that base, an offset
4901   describes the entry that is being used.  For Rela hosts, this offset
4902   is stored in the reloc's addend.  For Rel hosts, we are forced to put
4903   this offset in the reloc's section offset.
4904
4905 ENUM
4906   BFD_RELOC_IA64_IMM14
4907 ENUMX
4908   BFD_RELOC_IA64_IMM22
4909 ENUMX
4910   BFD_RELOC_IA64_IMM64
4911 ENUMX
4912   BFD_RELOC_IA64_DIR32MSB
4913 ENUMX
4914   BFD_RELOC_IA64_DIR32LSB
4915 ENUMX
4916   BFD_RELOC_IA64_DIR64MSB
4917 ENUMX
4918   BFD_RELOC_IA64_DIR64LSB
4919 ENUMX
4920   BFD_RELOC_IA64_GPREL22
4921 ENUMX
4922   BFD_RELOC_IA64_GPREL64I
4923 ENUMX
4924   BFD_RELOC_IA64_GPREL32MSB
4925 ENUMX
4926   BFD_RELOC_IA64_GPREL32LSB
4927 ENUMX
4928   BFD_RELOC_IA64_GPREL64MSB
4929 ENUMX
4930   BFD_RELOC_IA64_GPREL64LSB
4931 ENUMX
4932   BFD_RELOC_IA64_LTOFF22
4933 ENUMX
4934   BFD_RELOC_IA64_LTOFF64I
4935 ENUMX
4936   BFD_RELOC_IA64_PLTOFF22
4937 ENUMX
4938   BFD_RELOC_IA64_PLTOFF64I
4939 ENUMX
4940   BFD_RELOC_IA64_PLTOFF64MSB
4941 ENUMX
4942   BFD_RELOC_IA64_PLTOFF64LSB
4943 ENUMX
4944   BFD_RELOC_IA64_FPTR64I
4945 ENUMX
4946   BFD_RELOC_IA64_FPTR32MSB
4947 ENUMX
4948   BFD_RELOC_IA64_FPTR32LSB
4949 ENUMX
4950   BFD_RELOC_IA64_FPTR64MSB
4951 ENUMX
4952   BFD_RELOC_IA64_FPTR64LSB
4953 ENUMX
4954   BFD_RELOC_IA64_PCREL21B
4955 ENUMX
4956   BFD_RELOC_IA64_PCREL21BI
4957 ENUMX
4958   BFD_RELOC_IA64_PCREL21M
4959 ENUMX
4960   BFD_RELOC_IA64_PCREL21F
4961 ENUMX
4962   BFD_RELOC_IA64_PCREL22
4963 ENUMX
4964   BFD_RELOC_IA64_PCREL60B
4965 ENUMX
4966   BFD_RELOC_IA64_PCREL64I
4967 ENUMX
4968   BFD_RELOC_IA64_PCREL32MSB
4969 ENUMX
4970   BFD_RELOC_IA64_PCREL32LSB
4971 ENUMX
4972   BFD_RELOC_IA64_PCREL64MSB
4973 ENUMX
4974   BFD_RELOC_IA64_PCREL64LSB
4975 ENUMX
4976   BFD_RELOC_IA64_LTOFF_FPTR22
4977 ENUMX
4978   BFD_RELOC_IA64_LTOFF_FPTR64I
4979 ENUMX
4980   BFD_RELOC_IA64_LTOFF_FPTR32MSB
4981 ENUMX
4982   BFD_RELOC_IA64_LTOFF_FPTR32LSB
4983 ENUMX
4984   BFD_RELOC_IA64_LTOFF_FPTR64MSB
4985 ENUMX
4986   BFD_RELOC_IA64_LTOFF_FPTR64LSB
4987 ENUMX
4988   BFD_RELOC_IA64_SEGREL32MSB
4989 ENUMX
4990   BFD_RELOC_IA64_SEGREL32LSB
4991 ENUMX
4992   BFD_RELOC_IA64_SEGREL64MSB
4993 ENUMX
4994   BFD_RELOC_IA64_SEGREL64LSB
4995 ENUMX
4996   BFD_RELOC_IA64_SECREL32MSB
4997 ENUMX
4998   BFD_RELOC_IA64_SECREL32LSB
4999 ENUMX
5000   BFD_RELOC_IA64_SECREL64MSB
5001 ENUMX
5002   BFD_RELOC_IA64_SECREL64LSB
5003 ENUMX
5004   BFD_RELOC_IA64_REL32MSB
5005 ENUMX
5006   BFD_RELOC_IA64_REL32LSB
5007 ENUMX
5008   BFD_RELOC_IA64_REL64MSB
5009 ENUMX
5010   BFD_RELOC_IA64_REL64LSB
5011 ENUMX
5012   BFD_RELOC_IA64_LTV32MSB
5013 ENUMX
5014   BFD_RELOC_IA64_LTV32LSB
5015 ENUMX
5016   BFD_RELOC_IA64_LTV64MSB
5017 ENUMX
5018   BFD_RELOC_IA64_LTV64LSB
5019 ENUMX
5020   BFD_RELOC_IA64_IPLTMSB
5021 ENUMX
5022   BFD_RELOC_IA64_IPLTLSB
5023 ENUMX
5024   BFD_RELOC_IA64_COPY
5025 ENUMX
5026   BFD_RELOC_IA64_LTOFF22X
5027 ENUMX
5028   BFD_RELOC_IA64_LDXMOV
5029 ENUMX
5030   BFD_RELOC_IA64_TPREL14
5031 ENUMX
5032   BFD_RELOC_IA64_TPREL22
5033 ENUMX
5034   BFD_RELOC_IA64_TPREL64I
5035 ENUMX
5036   BFD_RELOC_IA64_TPREL64MSB
5037 ENUMX
5038   BFD_RELOC_IA64_TPREL64LSB
5039 ENUMX
5040   BFD_RELOC_IA64_LTOFF_TPREL22
5041 ENUMX
5042   BFD_RELOC_IA64_DTPMOD64MSB
5043 ENUMX
5044   BFD_RELOC_IA64_DTPMOD64LSB
5045 ENUMX
5046   BFD_RELOC_IA64_LTOFF_DTPMOD22
5047 ENUMX
5048   BFD_RELOC_IA64_DTPREL14
5049 ENUMX
5050   BFD_RELOC_IA64_DTPREL22
5051 ENUMX
5052   BFD_RELOC_IA64_DTPREL64I
5053 ENUMX
5054   BFD_RELOC_IA64_DTPREL32MSB
5055 ENUMX
5056   BFD_RELOC_IA64_DTPREL32LSB
5057 ENUMX
5058   BFD_RELOC_IA64_DTPREL64MSB
5059 ENUMX
5060   BFD_RELOC_IA64_DTPREL64LSB
5061 ENUMX
5062   BFD_RELOC_IA64_LTOFF_DTPREL22
5063 ENUMDOC
5064   Intel IA64 Relocations.
5065
5066 ENUM
5067   BFD_RELOC_M68HC11_HI8
5068 ENUMDOC
5069   Motorola 68HC11 reloc.
5070   This is the 8 bit high part of an absolute address.
5071 ENUM
5072   BFD_RELOC_M68HC11_LO8
5073 ENUMDOC
5074   Motorola 68HC11 reloc.
5075   This is the 8 bit low part of an absolute address.
5076 ENUM
5077   BFD_RELOC_M68HC11_3B
5078 ENUMDOC
5079   Motorola 68HC11 reloc.
5080   This is the 3 bit of a value.
5081 ENUM
5082   BFD_RELOC_M68HC11_RL_JUMP
5083 ENUMDOC
5084   Motorola 68HC11 reloc.
5085   This reloc marks the beginning of a jump/call instruction.
5086   It is used for linker relaxation to correctly identify beginning
5087   of instruction and change some branches to use PC-relative
5088   addressing mode.
5089 ENUM
5090   BFD_RELOC_M68HC11_RL_GROUP
5091 ENUMDOC
5092   Motorola 68HC11 reloc.
5093   This reloc marks a group of several instructions that gcc generates
5094   and for which the linker relaxation pass can modify and/or remove
5095   some of them.
5096 ENUM
5097   BFD_RELOC_M68HC11_LO16
5098 ENUMDOC
5099   Motorola 68HC11 reloc.
5100   This is the 16-bit lower part of an address.  It is used for 'call'
5101   instruction to specify the symbol address without any special
5102   transformation (due to memory bank window).
5103 ENUM
5104   BFD_RELOC_M68HC11_PAGE
5105 ENUMDOC
5106   Motorola 68HC11 reloc.
5107   This is a 8-bit reloc that specifies the page number of an address.
5108   It is used by 'call' instruction to specify the page number of
5109   the symbol.
5110 ENUM
5111   BFD_RELOC_M68HC11_24
5112 ENUMDOC
5113   Motorola 68HC11 reloc.
5114   This is a 24-bit reloc that represents the address with a 16-bit
5115   value and a 8-bit page number.  The symbol address is transformed
5116   to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
5117 ENUM
5118   BFD_RELOC_M68HC12_5B
5119 ENUMDOC
5120   Motorola 68HC12 reloc.
5121   This is the 5 bits of a value.
5122 ENUM
5123   BFD_RELOC_XGATE_RL_JUMP
5124 ENUMDOC
5125   Freescale XGATE reloc.
5126   This reloc marks the beginning of a bra/jal instruction.
5127 ENUM
5128   BFD_RELOC_XGATE_RL_GROUP
5129 ENUMDOC
5130   Freescale XGATE reloc.
5131   This reloc marks a group of several instructions that gcc generates
5132   and for which the linker relaxation pass can modify and/or remove
5133   some of them.
5134 ENUM
5135   BFD_RELOC_XGATE_LO16
5136 ENUMDOC
5137   Freescale XGATE reloc.
5138   This is the 16-bit lower part of an address.  It is used for the '16-bit'
5139   instructions.
5140 ENUM
5141   BFD_RELOC_XGATE_GPAGE
5142 ENUMDOC
5143   Freescale XGATE reloc.
5144 ENUM
5145   BFD_RELOC_XGATE_24
5146 ENUMDOC
5147   Freescale XGATE reloc.
5148 ENUM
5149   BFD_RELOC_XGATE_PCREL_9
5150 ENUMDOC
5151   Freescale XGATE reloc.
5152   This is a 9-bit pc-relative reloc.
5153 ENUM
5154   BFD_RELOC_XGATE_PCREL_10
5155 ENUMDOC
5156   Freescale XGATE reloc.
5157   This is a 10-bit pc-relative reloc.
5158 ENUM
5159   BFD_RELOC_XGATE_IMM8_LO
5160 ENUMDOC
5161   Freescale XGATE reloc.
5162   This is the 16-bit lower part of an address.  It is used for the '16-bit'
5163   instructions.
5164 ENUM
5165   BFD_RELOC_XGATE_IMM8_HI
5166 ENUMDOC
5167   Freescale XGATE reloc.
5168   This is the 16-bit higher part of an address.  It is used for the '16-bit'
5169   instructions.
5170 ENUM
5171   BFD_RELOC_XGATE_IMM3
5172 ENUMDOC
5173   Freescale XGATE reloc.
5174   This is a 3-bit pc-relative reloc.
5175 ENUM
5176   BFD_RELOC_XGATE_IMM4
5177 ENUMDOC
5178   Freescale XGATE reloc.
5179   This is a 4-bit pc-relative reloc.
5180 ENUM
5181   BFD_RELOC_XGATE_IMM5
5182 ENUMDOC
5183   Freescale XGATE reloc.
5184   This is a 5-bit pc-relative reloc.
5185 ENUM
5186   BFD_RELOC_M68HC12_9B
5187 ENUMDOC
5188   Motorola 68HC12 reloc.
5189   This is the 9 bits of a value.
5190 ENUM
5191   BFD_RELOC_M68HC12_16B
5192 ENUMDOC
5193   Motorola 68HC12 reloc.
5194   This is the 16 bits of a value.
5195 ENUM
5196   BFD_RELOC_M68HC12_9_PCREL
5197 ENUMDOC
5198   Motorola 68HC12/XGATE reloc.
5199   This is a PCREL9 branch.
5200 ENUM
5201   BFD_RELOC_M68HC12_10_PCREL
5202 ENUMDOC
5203   Motorola 68HC12/XGATE reloc.
5204   This is a PCREL10 branch.
5205 ENUM
5206   BFD_RELOC_M68HC12_LO8XG
5207 ENUMDOC
5208   Motorola 68HC12/XGATE reloc.
5209   This is the 8 bit low part of an absolute address and immediately precedes
5210   a matching HI8XG part.
5211 ENUM
5212   BFD_RELOC_M68HC12_HI8XG
5213 ENUMDOC
5214   Motorola 68HC12/XGATE reloc.
5215   This is the 8 bit high part of an absolute address and immediately follows
5216   a matching LO8XG part.
5217 ENUM
5218   BFD_RELOC_16C_NUM08
5219 ENUMX
5220   BFD_RELOC_16C_NUM08_C
5221 ENUMX
5222   BFD_RELOC_16C_NUM16
5223 ENUMX
5224   BFD_RELOC_16C_NUM16_C
5225 ENUMX
5226   BFD_RELOC_16C_NUM32
5227 ENUMX
5228   BFD_RELOC_16C_NUM32_C
5229 ENUMX
5230   BFD_RELOC_16C_DISP04
5231 ENUMX
5232   BFD_RELOC_16C_DISP04_C
5233 ENUMX
5234   BFD_RELOC_16C_DISP08
5235 ENUMX
5236   BFD_RELOC_16C_DISP08_C
5237 ENUMX
5238   BFD_RELOC_16C_DISP16
5239 ENUMX
5240   BFD_RELOC_16C_DISP16_C
5241 ENUMX
5242   BFD_RELOC_16C_DISP24
5243 ENUMX
5244   BFD_RELOC_16C_DISP24_C
5245 ENUMX
5246   BFD_RELOC_16C_DISP24a
5247 ENUMX
5248   BFD_RELOC_16C_DISP24a_C
5249 ENUMX
5250   BFD_RELOC_16C_REG04
5251 ENUMX
5252   BFD_RELOC_16C_REG04_C
5253 ENUMX
5254   BFD_RELOC_16C_REG04a
5255 ENUMX
5256   BFD_RELOC_16C_REG04a_C
5257 ENUMX
5258   BFD_RELOC_16C_REG14
5259 ENUMX
5260   BFD_RELOC_16C_REG14_C
5261 ENUMX
5262   BFD_RELOC_16C_REG16
5263 ENUMX
5264   BFD_RELOC_16C_REG16_C
5265 ENUMX
5266   BFD_RELOC_16C_REG20
5267 ENUMX
5268   BFD_RELOC_16C_REG20_C
5269 ENUMX
5270   BFD_RELOC_16C_ABS20
5271 ENUMX
5272   BFD_RELOC_16C_ABS20_C
5273 ENUMX
5274   BFD_RELOC_16C_ABS24
5275 ENUMX
5276   BFD_RELOC_16C_ABS24_C
5277 ENUMX
5278   BFD_RELOC_16C_IMM04
5279 ENUMX
5280   BFD_RELOC_16C_IMM04_C
5281 ENUMX
5282   BFD_RELOC_16C_IMM16
5283 ENUMX
5284   BFD_RELOC_16C_IMM16_C
5285 ENUMX
5286   BFD_RELOC_16C_IMM20
5287 ENUMX
5288   BFD_RELOC_16C_IMM20_C
5289 ENUMX
5290   BFD_RELOC_16C_IMM24
5291 ENUMX
5292   BFD_RELOC_16C_IMM24_C
5293 ENUMX
5294   BFD_RELOC_16C_IMM32
5295 ENUMX
5296   BFD_RELOC_16C_IMM32_C
5297 ENUMDOC
5298   NS CR16C Relocations.
5299
5300 ENUM
5301   BFD_RELOC_CR16_NUM8
5302 ENUMX
5303   BFD_RELOC_CR16_NUM16
5304 ENUMX
5305   BFD_RELOC_CR16_NUM32
5306 ENUMX
5307   BFD_RELOC_CR16_NUM32a
5308 ENUMX
5309   BFD_RELOC_CR16_REGREL0
5310 ENUMX
5311   BFD_RELOC_CR16_REGREL4
5312 ENUMX
5313   BFD_RELOC_CR16_REGREL4a
5314 ENUMX
5315   BFD_RELOC_CR16_REGREL14
5316 ENUMX
5317   BFD_RELOC_CR16_REGREL14a
5318 ENUMX
5319   BFD_RELOC_CR16_REGREL16
5320 ENUMX
5321   BFD_RELOC_CR16_REGREL20
5322 ENUMX
5323   BFD_RELOC_CR16_REGREL20a
5324 ENUMX
5325   BFD_RELOC_CR16_ABS20
5326 ENUMX
5327   BFD_RELOC_CR16_ABS24
5328 ENUMX
5329   BFD_RELOC_CR16_IMM4
5330 ENUMX
5331   BFD_RELOC_CR16_IMM8
5332 ENUMX
5333   BFD_RELOC_CR16_IMM16
5334 ENUMX
5335   BFD_RELOC_CR16_IMM20
5336 ENUMX
5337   BFD_RELOC_CR16_IMM24
5338 ENUMX
5339   BFD_RELOC_CR16_IMM32
5340 ENUMX
5341   BFD_RELOC_CR16_IMM32a
5342 ENUMX
5343   BFD_RELOC_CR16_DISP4
5344 ENUMX
5345   BFD_RELOC_CR16_DISP8
5346 ENUMX
5347   BFD_RELOC_CR16_DISP16
5348 ENUMX
5349   BFD_RELOC_CR16_DISP20
5350 ENUMX
5351   BFD_RELOC_CR16_DISP24
5352 ENUMX
5353   BFD_RELOC_CR16_DISP24a
5354 ENUMX
5355   BFD_RELOC_CR16_SWITCH8
5356 ENUMX
5357   BFD_RELOC_CR16_SWITCH16
5358 ENUMX
5359   BFD_RELOC_CR16_SWITCH32
5360 ENUMX
5361   BFD_RELOC_CR16_GOT_REGREL20
5362 ENUMX
5363   BFD_RELOC_CR16_GOTC_REGREL20
5364 ENUMX
5365   BFD_RELOC_CR16_GLOB_DAT
5366 ENUMDOC
5367   NS CR16 Relocations.
5368
5369 ENUM
5370   BFD_RELOC_CRX_REL4
5371 ENUMX
5372   BFD_RELOC_CRX_REL8
5373 ENUMX
5374   BFD_RELOC_CRX_REL8_CMP
5375 ENUMX
5376   BFD_RELOC_CRX_REL16
5377 ENUMX
5378   BFD_RELOC_CRX_REL24
5379 ENUMX
5380   BFD_RELOC_CRX_REL32
5381 ENUMX
5382   BFD_RELOC_CRX_REGREL12
5383 ENUMX
5384   BFD_RELOC_CRX_REGREL22
5385 ENUMX
5386   BFD_RELOC_CRX_REGREL28
5387 ENUMX
5388   BFD_RELOC_CRX_REGREL32
5389 ENUMX
5390   BFD_RELOC_CRX_ABS16
5391 ENUMX
5392   BFD_RELOC_CRX_ABS32
5393 ENUMX
5394   BFD_RELOC_CRX_NUM8
5395 ENUMX
5396   BFD_RELOC_CRX_NUM16
5397 ENUMX
5398   BFD_RELOC_CRX_NUM32
5399 ENUMX
5400   BFD_RELOC_CRX_IMM16
5401 ENUMX
5402   BFD_RELOC_CRX_IMM32
5403 ENUMX
5404   BFD_RELOC_CRX_SWITCH8
5405 ENUMX
5406   BFD_RELOC_CRX_SWITCH16
5407 ENUMX
5408   BFD_RELOC_CRX_SWITCH32
5409 ENUMDOC
5410   NS CRX Relocations.
5411
5412 ENUM
5413   BFD_RELOC_CRIS_BDISP8
5414 ENUMX
5415   BFD_RELOC_CRIS_UNSIGNED_5
5416 ENUMX
5417   BFD_RELOC_CRIS_SIGNED_6
5418 ENUMX
5419   BFD_RELOC_CRIS_UNSIGNED_6
5420 ENUMX
5421   BFD_RELOC_CRIS_SIGNED_8
5422 ENUMX
5423   BFD_RELOC_CRIS_UNSIGNED_8
5424 ENUMX
5425   BFD_RELOC_CRIS_SIGNED_16
5426 ENUMX
5427   BFD_RELOC_CRIS_UNSIGNED_16
5428 ENUMX
5429   BFD_RELOC_CRIS_LAPCQ_OFFSET
5430 ENUMX
5431   BFD_RELOC_CRIS_UNSIGNED_4
5432 ENUMDOC
5433   These relocs are only used within the CRIS assembler.  They are not
5434   (at present) written to any object files.
5435 ENUM
5436   BFD_RELOC_CRIS_COPY
5437 ENUMX
5438   BFD_RELOC_CRIS_GLOB_DAT
5439 ENUMX
5440   BFD_RELOC_CRIS_JUMP_SLOT
5441 ENUMX
5442   BFD_RELOC_CRIS_RELATIVE
5443 ENUMDOC
5444   Relocs used in ELF shared libraries for CRIS.
5445 ENUM
5446   BFD_RELOC_CRIS_32_GOT
5447 ENUMDOC
5448   32-bit offset to symbol-entry within GOT.
5449 ENUM
5450   BFD_RELOC_CRIS_16_GOT
5451 ENUMDOC
5452   16-bit offset to symbol-entry within GOT.
5453 ENUM
5454   BFD_RELOC_CRIS_32_GOTPLT
5455 ENUMDOC
5456   32-bit offset to symbol-entry within GOT, with PLT handling.
5457 ENUM
5458   BFD_RELOC_CRIS_16_GOTPLT
5459 ENUMDOC
5460   16-bit offset to symbol-entry within GOT, with PLT handling.
5461 ENUM
5462   BFD_RELOC_CRIS_32_GOTREL
5463 ENUMDOC
5464   32-bit offset to symbol, relative to GOT.
5465 ENUM
5466   BFD_RELOC_CRIS_32_PLT_GOTREL
5467 ENUMDOC
5468   32-bit offset to symbol with PLT entry, relative to GOT.
5469 ENUM
5470   BFD_RELOC_CRIS_32_PLT_PCREL
5471 ENUMDOC
5472   32-bit offset to symbol with PLT entry, relative to this relocation.
5473
5474 ENUM
5475   BFD_RELOC_CRIS_32_GOT_GD
5476 ENUMX
5477   BFD_RELOC_CRIS_16_GOT_GD
5478 ENUMX
5479   BFD_RELOC_CRIS_32_GD
5480 ENUMX
5481   BFD_RELOC_CRIS_DTP
5482 ENUMX
5483   BFD_RELOC_CRIS_32_DTPREL
5484 ENUMX
5485   BFD_RELOC_CRIS_16_DTPREL
5486 ENUMX
5487   BFD_RELOC_CRIS_32_GOT_TPREL
5488 ENUMX
5489   BFD_RELOC_CRIS_16_GOT_TPREL
5490 ENUMX
5491   BFD_RELOC_CRIS_32_TPREL
5492 ENUMX
5493   BFD_RELOC_CRIS_16_TPREL
5494 ENUMX
5495   BFD_RELOC_CRIS_DTPMOD
5496 ENUMX
5497   BFD_RELOC_CRIS_32_IE
5498 ENUMDOC
5499   Relocs used in TLS code for CRIS.
5500
5501 ENUM
5502   BFD_RELOC_860_COPY
5503 ENUMX
5504   BFD_RELOC_860_GLOB_DAT
5505 ENUMX
5506   BFD_RELOC_860_JUMP_SLOT
5507 ENUMX
5508   BFD_RELOC_860_RELATIVE
5509 ENUMX
5510   BFD_RELOC_860_PC26
5511 ENUMX
5512   BFD_RELOC_860_PLT26
5513 ENUMX
5514   BFD_RELOC_860_PC16
5515 ENUMX
5516   BFD_RELOC_860_LOW0
5517 ENUMX
5518   BFD_RELOC_860_SPLIT0
5519 ENUMX
5520   BFD_RELOC_860_LOW1
5521 ENUMX
5522   BFD_RELOC_860_SPLIT1
5523 ENUMX
5524   BFD_RELOC_860_LOW2
5525 ENUMX
5526   BFD_RELOC_860_SPLIT2
5527 ENUMX
5528   BFD_RELOC_860_LOW3
5529 ENUMX
5530   BFD_RELOC_860_LOGOT0
5531 ENUMX
5532   BFD_RELOC_860_SPGOT0
5533 ENUMX
5534   BFD_RELOC_860_LOGOT1
5535 ENUMX
5536   BFD_RELOC_860_SPGOT1
5537 ENUMX
5538   BFD_RELOC_860_LOGOTOFF0
5539 ENUMX
5540   BFD_RELOC_860_SPGOTOFF0
5541 ENUMX
5542   BFD_RELOC_860_LOGOTOFF1
5543 ENUMX
5544   BFD_RELOC_860_SPGOTOFF1
5545 ENUMX
5546   BFD_RELOC_860_LOGOTOFF2
5547 ENUMX
5548   BFD_RELOC_860_LOGOTOFF3
5549 ENUMX
5550   BFD_RELOC_860_LOPC
5551 ENUMX
5552   BFD_RELOC_860_HIGHADJ
5553 ENUMX
5554   BFD_RELOC_860_HAGOT
5555 ENUMX
5556   BFD_RELOC_860_HAGOTOFF
5557 ENUMX
5558   BFD_RELOC_860_HAPC
5559 ENUMX
5560   BFD_RELOC_860_HIGH
5561 ENUMX
5562   BFD_RELOC_860_HIGOT
5563 ENUMX
5564   BFD_RELOC_860_HIGOTOFF
5565 ENUMDOC
5566   Intel i860 Relocations.
5567
5568 ENUM
5569   BFD_RELOC_OPENRISC_ABS_26
5570 ENUMX
5571   BFD_RELOC_OPENRISC_REL_26
5572 ENUMDOC
5573   OpenRISC Relocations.
5574
5575 ENUM
5576   BFD_RELOC_H8_DIR16A8
5577 ENUMX
5578   BFD_RELOC_H8_DIR16R8
5579 ENUMX
5580   BFD_RELOC_H8_DIR24A8
5581 ENUMX
5582   BFD_RELOC_H8_DIR24R8
5583 ENUMX
5584   BFD_RELOC_H8_DIR32A16
5585 ENUMDOC
5586   H8 elf Relocations.
5587
5588 ENUM
5589   BFD_RELOC_XSTORMY16_REL_12
5590 ENUMX
5591   BFD_RELOC_XSTORMY16_12
5592 ENUMX
5593   BFD_RELOC_XSTORMY16_24
5594 ENUMX
5595   BFD_RELOC_XSTORMY16_FPTR16
5596 ENUMDOC
5597   Sony Xstormy16 Relocations.
5598
5599 ENUM
5600   BFD_RELOC_RELC
5601 ENUMDOC
5602   Self-describing complex relocations.
5603 COMMENT
5604
5605 ENUM
5606   BFD_RELOC_XC16X_PAG
5607 ENUMX
5608   BFD_RELOC_XC16X_POF
5609 ENUMX
5610   BFD_RELOC_XC16X_SEG
5611 ENUMX
5612   BFD_RELOC_XC16X_SOF
5613 ENUMDOC
5614   Infineon Relocations.
5615
5616 ENUM
5617   BFD_RELOC_VAX_GLOB_DAT
5618 ENUMX
5619   BFD_RELOC_VAX_JMP_SLOT
5620 ENUMX
5621   BFD_RELOC_VAX_RELATIVE
5622 ENUMDOC
5623   Relocations used by VAX ELF.
5624
5625 ENUM
5626   BFD_RELOC_MT_PC16
5627 ENUMDOC
5628   Morpho MT - 16 bit immediate relocation.
5629 ENUM
5630   BFD_RELOC_MT_HI16
5631 ENUMDOC
5632   Morpho MT - Hi 16 bits of an address.
5633 ENUM
5634   BFD_RELOC_MT_LO16
5635 ENUMDOC
5636   Morpho MT - Low 16 bits of an address.
5637 ENUM
5638   BFD_RELOC_MT_GNU_VTINHERIT
5639 ENUMDOC
5640   Morpho MT - Used to tell the linker which vtable entries are used.
5641 ENUM
5642   BFD_RELOC_MT_GNU_VTENTRY
5643 ENUMDOC
5644   Morpho MT - Used to tell the linker which vtable entries are used.
5645 ENUM
5646   BFD_RELOC_MT_PCINSN8
5647 ENUMDOC
5648   Morpho MT - 8 bit immediate relocation.
5649
5650 ENUM
5651   BFD_RELOC_MSP430_10_PCREL
5652 ENUMX
5653   BFD_RELOC_MSP430_16_PCREL
5654 ENUMX
5655   BFD_RELOC_MSP430_16
5656 ENUMX
5657   BFD_RELOC_MSP430_16_PCREL_BYTE
5658 ENUMX
5659   BFD_RELOC_MSP430_16_BYTE
5660 ENUMX
5661   BFD_RELOC_MSP430_2X_PCREL
5662 ENUMX
5663   BFD_RELOC_MSP430_RL_PCREL
5664 ENUMDOC
5665   msp430 specific relocation codes
5666
5667 ENUM
5668   BFD_RELOC_NIOS2_S16
5669 ENUMX
5670   BFD_RELOC_NIOS2_U16
5671 ENUMX
5672   BFD_RELOC_NIOS2_CALL26
5673 ENUMX
5674   BFD_RELOC_NIOS2_IMM5
5675 ENUMX
5676   BFD_RELOC_NIOS2_CACHE_OPX
5677 ENUMX
5678   BFD_RELOC_NIOS2_IMM6
5679 ENUMX
5680   BFD_RELOC_NIOS2_IMM8
5681 ENUMX
5682   BFD_RELOC_NIOS2_HI16
5683 ENUMX
5684   BFD_RELOC_NIOS2_LO16
5685 ENUMX
5686   BFD_RELOC_NIOS2_HIADJ16
5687 ENUMX
5688   BFD_RELOC_NIOS2_GPREL
5689 ENUMX
5690   BFD_RELOC_NIOS2_UJMP
5691 ENUMX
5692   BFD_RELOC_NIOS2_CJMP
5693 ENUMX
5694   BFD_RELOC_NIOS2_CALLR
5695 ENUMX
5696   BFD_RELOC_NIOS2_ALIGN
5697 ENUMX
5698   BFD_RELOC_NIOS2_GOT16
5699 ENUMX
5700   BFD_RELOC_NIOS2_CALL16
5701 ENUMX
5702   BFD_RELOC_NIOS2_GOTOFF_LO
5703 ENUMX
5704   BFD_RELOC_NIOS2_GOTOFF_HA
5705 ENUMX
5706   BFD_RELOC_NIOS2_PCREL_LO
5707 ENUMX
5708   BFD_RELOC_NIOS2_PCREL_HA
5709 ENUMX
5710   BFD_RELOC_NIOS2_TLS_GD16
5711 ENUMX
5712   BFD_RELOC_NIOS2_TLS_LDM16
5713 ENUMX
5714   BFD_RELOC_NIOS2_TLS_LDO16
5715 ENUMX
5716   BFD_RELOC_NIOS2_TLS_IE16
5717 ENUMX
5718   BFD_RELOC_NIOS2_TLS_LE16
5719 ENUMX
5720   BFD_RELOC_NIOS2_TLS_DTPMOD
5721 ENUMX
5722   BFD_RELOC_NIOS2_TLS_DTPREL
5723 ENUMX
5724   BFD_RELOC_NIOS2_TLS_TPREL
5725 ENUMX
5726   BFD_RELOC_NIOS2_COPY
5727 ENUMX
5728   BFD_RELOC_NIOS2_GLOB_DAT
5729 ENUMX
5730   BFD_RELOC_NIOS2_JUMP_SLOT
5731 ENUMX
5732   BFD_RELOC_NIOS2_RELATIVE
5733 ENUMX
5734   BFD_RELOC_NIOS2_GOTOFF
5735 ENUMDOC
5736   Relocations used by the Altera Nios II core.
5737
5738 ENUM
5739   BFD_RELOC_IQ2000_OFFSET_16
5740 ENUMX
5741   BFD_RELOC_IQ2000_OFFSET_21
5742 ENUMX
5743   BFD_RELOC_IQ2000_UHI16
5744 ENUMDOC
5745   IQ2000 Relocations.
5746
5747 ENUM
5748   BFD_RELOC_XTENSA_RTLD
5749 ENUMDOC
5750   Special Xtensa relocation used only by PLT entries in ELF shared
5751   objects to indicate that the runtime linker should set the value
5752   to one of its own internal functions or data structures.
5753 ENUM
5754   BFD_RELOC_XTENSA_GLOB_DAT
5755 ENUMX
5756   BFD_RELOC_XTENSA_JMP_SLOT
5757 ENUMX
5758   BFD_RELOC_XTENSA_RELATIVE
5759 ENUMDOC
5760   Xtensa relocations for ELF shared objects.
5761 ENUM
5762   BFD_RELOC_XTENSA_PLT
5763 ENUMDOC
5764   Xtensa relocation used in ELF object files for symbols that may require
5765   PLT entries.  Otherwise, this is just a generic 32-bit relocation.
5766 ENUM
5767   BFD_RELOC_XTENSA_DIFF8
5768 ENUMX
5769   BFD_RELOC_XTENSA_DIFF16
5770 ENUMX
5771   BFD_RELOC_XTENSA_DIFF32
5772 ENUMDOC
5773   Xtensa relocations to mark the difference of two local symbols.
5774   These are only needed to support linker relaxation and can be ignored
5775   when not relaxing.  The field is set to the value of the difference
5776   assuming no relaxation.  The relocation encodes the position of the
5777   first symbol so the linker can determine whether to adjust the field
5778   value.
5779 ENUM
5780   BFD_RELOC_XTENSA_SLOT0_OP
5781 ENUMX
5782   BFD_RELOC_XTENSA_SLOT1_OP
5783 ENUMX
5784   BFD_RELOC_XTENSA_SLOT2_OP
5785 ENUMX
5786   BFD_RELOC_XTENSA_SLOT3_OP
5787 ENUMX
5788   BFD_RELOC_XTENSA_SLOT4_OP
5789 ENUMX
5790   BFD_RELOC_XTENSA_SLOT5_OP
5791 ENUMX
5792   BFD_RELOC_XTENSA_SLOT6_OP
5793 ENUMX
5794   BFD_RELOC_XTENSA_SLOT7_OP
5795 ENUMX
5796   BFD_RELOC_XTENSA_SLOT8_OP
5797 ENUMX
5798   BFD_RELOC_XTENSA_SLOT9_OP
5799 ENUMX
5800   BFD_RELOC_XTENSA_SLOT10_OP
5801 ENUMX
5802   BFD_RELOC_XTENSA_SLOT11_OP
5803 ENUMX
5804   BFD_RELOC_XTENSA_SLOT12_OP
5805 ENUMX
5806   BFD_RELOC_XTENSA_SLOT13_OP
5807 ENUMX
5808   BFD_RELOC_XTENSA_SLOT14_OP
5809 ENUMDOC
5810   Generic Xtensa relocations for instruction operands.  Only the slot
5811   number is encoded in the relocation.  The relocation applies to the
5812   last PC-relative immediate operand, or if there are no PC-relative
5813   immediates, to the last immediate operand.
5814 ENUM
5815   BFD_RELOC_XTENSA_SLOT0_ALT
5816 ENUMX
5817   BFD_RELOC_XTENSA_SLOT1_ALT
5818 ENUMX
5819   BFD_RELOC_XTENSA_SLOT2_ALT
5820 ENUMX
5821   BFD_RELOC_XTENSA_SLOT3_ALT
5822 ENUMX
5823   BFD_RELOC_XTENSA_SLOT4_ALT
5824 ENUMX
5825   BFD_RELOC_XTENSA_SLOT5_ALT
5826 ENUMX
5827   BFD_RELOC_XTENSA_SLOT6_ALT
5828 ENUMX
5829   BFD_RELOC_XTENSA_SLOT7_ALT
5830 ENUMX
5831   BFD_RELOC_XTENSA_SLOT8_ALT
5832 ENUMX
5833   BFD_RELOC_XTENSA_SLOT9_ALT
5834 ENUMX
5835   BFD_RELOC_XTENSA_SLOT10_ALT
5836 ENUMX
5837   BFD_RELOC_XTENSA_SLOT11_ALT
5838 ENUMX
5839   BFD_RELOC_XTENSA_SLOT12_ALT
5840 ENUMX
5841   BFD_RELOC_XTENSA_SLOT13_ALT
5842 ENUMX
5843   BFD_RELOC_XTENSA_SLOT14_ALT
5844 ENUMDOC
5845   Alternate Xtensa relocations.  Only the slot is encoded in the
5846   relocation.  The meaning of these relocations is opcode-specific.
5847 ENUM
5848   BFD_RELOC_XTENSA_OP0
5849 ENUMX
5850   BFD_RELOC_XTENSA_OP1
5851 ENUMX
5852   BFD_RELOC_XTENSA_OP2
5853 ENUMDOC
5854   Xtensa relocations for backward compatibility.  These have all been
5855   replaced by BFD_RELOC_XTENSA_SLOT0_OP.
5856 ENUM
5857   BFD_RELOC_XTENSA_ASM_EXPAND
5858 ENUMDOC
5859   Xtensa relocation to mark that the assembler expanded the
5860   instructions from an original target.  The expansion size is
5861   encoded in the reloc size.
5862 ENUM
5863   BFD_RELOC_XTENSA_ASM_SIMPLIFY
5864 ENUMDOC
5865   Xtensa relocation to mark that the linker should simplify
5866   assembler-expanded instructions.  This is commonly used
5867   internally by the linker after analysis of a
5868   BFD_RELOC_XTENSA_ASM_EXPAND.
5869 ENUM
5870   BFD_RELOC_XTENSA_TLSDESC_FN
5871 ENUMX
5872   BFD_RELOC_XTENSA_TLSDESC_ARG
5873 ENUMX
5874   BFD_RELOC_XTENSA_TLS_DTPOFF
5875 ENUMX
5876   BFD_RELOC_XTENSA_TLS_TPOFF
5877 ENUMX
5878   BFD_RELOC_XTENSA_TLS_FUNC
5879 ENUMX
5880   BFD_RELOC_XTENSA_TLS_ARG
5881 ENUMX
5882   BFD_RELOC_XTENSA_TLS_CALL
5883 ENUMDOC
5884   Xtensa TLS relocations.
5885
5886 ENUM
5887   BFD_RELOC_Z80_DISP8
5888 ENUMDOC
5889   8 bit signed offset in (ix+d) or (iy+d).
5890
5891 ENUM
5892   BFD_RELOC_Z8K_DISP7
5893 ENUMDOC
5894   DJNZ offset.
5895 ENUM
5896   BFD_RELOC_Z8K_CALLR
5897 ENUMDOC
5898   CALR offset.
5899 ENUM
5900   BFD_RELOC_Z8K_IMM4L
5901 ENUMDOC
5902   4 bit value.
5903
5904 ENUM
5905    BFD_RELOC_LM32_CALL
5906 ENUMX
5907    BFD_RELOC_LM32_BRANCH
5908 ENUMX
5909    BFD_RELOC_LM32_16_GOT
5910 ENUMX
5911    BFD_RELOC_LM32_GOTOFF_HI16
5912 ENUMX
5913    BFD_RELOC_LM32_GOTOFF_LO16
5914 ENUMX
5915    BFD_RELOC_LM32_COPY
5916 ENUMX
5917    BFD_RELOC_LM32_GLOB_DAT
5918 ENUMX
5919    BFD_RELOC_LM32_JMP_SLOT
5920 ENUMX
5921    BFD_RELOC_LM32_RELATIVE
5922 ENUMDOC
5923  Lattice Mico32 relocations.
5924
5925 ENUM
5926   BFD_RELOC_MACH_O_SECTDIFF
5927 ENUMDOC
5928   Difference between two section addreses.  Must be followed by a
5929   BFD_RELOC_MACH_O_PAIR.
5930 ENUM
5931   BFD_RELOC_MACH_O_LOCAL_SECTDIFF
5932 ENUMDOC
5933   Like BFD_RELOC_MACH_O_SECTDIFF but with a local symbol.
5934 ENUM
5935   BFD_RELOC_MACH_O_PAIR
5936 ENUMDOC
5937   Pair of relocation.  Contains the first symbol.
5938
5939 ENUM
5940   BFD_RELOC_MACH_O_X86_64_BRANCH32
5941 ENUMX
5942   BFD_RELOC_MACH_O_X86_64_BRANCH8
5943 ENUMDOC
5944   PCREL relocations.  They are marked as branch to create PLT entry if
5945   required.
5946 ENUM
5947   BFD_RELOC_MACH_O_X86_64_GOT
5948 ENUMDOC
5949   Used when referencing a GOT entry.
5950 ENUM
5951   BFD_RELOC_MACH_O_X86_64_GOT_LOAD
5952 ENUMDOC
5953   Used when loading a GOT entry with movq.  It is specially marked so that
5954   the linker could optimize the movq to a leaq if possible.
5955 ENUM
5956   BFD_RELOC_MACH_O_X86_64_SUBTRACTOR32
5957 ENUMDOC
5958   Symbol will be substracted.  Must be followed by a BFD_RELOC_64.
5959 ENUM
5960   BFD_RELOC_MACH_O_X86_64_SUBTRACTOR64
5961 ENUMDOC
5962   Symbol will be substracted.  Must be followed by a BFD_RELOC_64.
5963 ENUM
5964   BFD_RELOC_MACH_O_X86_64_PCREL32_1
5965 ENUMDOC
5966   Same as BFD_RELOC_32_PCREL but with an implicit -1 addend.
5967 ENUM
5968   BFD_RELOC_MACH_O_X86_64_PCREL32_2
5969 ENUMDOC
5970   Same as BFD_RELOC_32_PCREL but with an implicit -2 addend.
5971 ENUM
5972   BFD_RELOC_MACH_O_X86_64_PCREL32_4
5973 ENUMDOC
5974   Same as BFD_RELOC_32_PCREL but with an implicit -4 addend.
5975
5976 ENUM
5977   BFD_RELOC_MICROBLAZE_32_LO
5978 ENUMDOC
5979   This is a 32 bit reloc for the microblaze that stores the
5980   low 16 bits of a value
5981 ENUM
5982   BFD_RELOC_MICROBLAZE_32_LO_PCREL
5983 ENUMDOC
5984   This is a 32 bit pc-relative reloc for the microblaze that
5985   stores the low 16 bits of a value
5986 ENUM
5987   BFD_RELOC_MICROBLAZE_32_ROSDA
5988 ENUMDOC
5989   This is a 32 bit reloc for the microblaze that stores a
5990   value relative to the read-only small data area anchor
5991 ENUM
5992   BFD_RELOC_MICROBLAZE_32_RWSDA
5993 ENUMDOC
5994   This is a 32 bit reloc for the microblaze that stores a
5995   value relative to the read-write small data area anchor
5996 ENUM
5997   BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM
5998 ENUMDOC
5999   This is a 32 bit reloc for the microblaze to handle
6000   expressions of the form "Symbol Op Symbol"
6001 ENUM
6002   BFD_RELOC_MICROBLAZE_64_NONE
6003 ENUMDOC
6004   This is a 64 bit reloc that stores the 32 bit pc relative
6005   value in two words (with an imm instruction).  No relocation is
6006   done here - only used for relaxing
6007 ENUM
6008   BFD_RELOC_MICROBLAZE_64_GOTPC
6009 ENUMDOC
6010   This is a 64 bit reloc that stores the 32 bit pc relative
6011   value in two words (with an imm instruction).  The relocation is
6012   PC-relative GOT offset
6013 ENUM
6014   BFD_RELOC_MICROBLAZE_64_GOT
6015 ENUMDOC
6016   This is a 64 bit reloc that stores the 32 bit pc relative
6017   value in two words (with an imm instruction).  The relocation is
6018   GOT offset
6019 ENUM
6020   BFD_RELOC_MICROBLAZE_64_PLT
6021 ENUMDOC
6022   This is a 64 bit reloc that stores the 32 bit pc relative
6023   value in two words (with an imm instruction).  The relocation is
6024   PC-relative offset into PLT
6025 ENUM
6026   BFD_RELOC_MICROBLAZE_64_GOTOFF
6027 ENUMDOC
6028   This is a 64 bit reloc that stores the 32 bit GOT relative
6029   value in two words (with an imm instruction).  The relocation is
6030   relative offset from _GLOBAL_OFFSET_TABLE_
6031 ENUM
6032   BFD_RELOC_MICROBLAZE_32_GOTOFF
6033 ENUMDOC
6034   This is a 32 bit reloc that stores the 32 bit GOT relative
6035   value in a word.  The relocation is relative offset from
6036   _GLOBAL_OFFSET_TABLE_
6037 ENUM
6038   BFD_RELOC_MICROBLAZE_COPY
6039 ENUMDOC
6040   This is used to tell the dynamic linker to copy the value out of
6041   the dynamic object into the runtime process image.
6042 ENUM
6043   BFD_RELOC_MICROBLAZE_64_TLS
6044 ENUMDOC
6045   Unused Reloc
6046 ENUM
6047   BFD_RELOC_MICROBLAZE_64_TLSGD
6048 ENUMDOC
6049   This is a 64 bit reloc that stores the 32 bit GOT relative value
6050   of the GOT TLS GD info entry in two words (with an imm instruction). The
6051   relocation is GOT offset.
6052 ENUM
6053   BFD_RELOC_MICROBLAZE_64_TLSLD
6054 ENUMDOC
6055   This is a 64 bit reloc that stores the 32 bit GOT relative value
6056   of the GOT TLS LD info entry in two words (with an imm instruction). The
6057   relocation is GOT offset.
6058 ENUM
6059   BFD_RELOC_MICROBLAZE_32_TLSDTPMOD
6060 ENUMDOC
6061   This is a 32 bit reloc that stores the Module ID to GOT(n).
6062 ENUM
6063   BFD_RELOC_MICROBLAZE_32_TLSDTPREL
6064 ENUMDOC
6065   This is a 32 bit reloc that stores TLS offset to GOT(n+1).
6066 ENUM
6067   BFD_RELOC_MICROBLAZE_64_TLSDTPREL
6068 ENUMDOC
6069   This is a 32 bit reloc for storing TLS offset to two words (uses imm
6070   instruction)
6071 ENUM
6072   BFD_RELOC_MICROBLAZE_64_TLSGOTTPREL
6073 ENUMDOC
6074   This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6075   to two words (uses imm instruction).
6076 ENUM
6077   BFD_RELOC_MICROBLAZE_64_TLSTPREL
6078 ENUMDOC
6079   This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6080   to two words (uses imm instruction).
6081
6082 ENUM
6083   BFD_RELOC_AARCH64_ADD_LO12
6084 ENUMDOC
6085   AArch64 ADD immediate instruction, holding bits 0 to 11 of the address.
6086   Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6087 ENUM
6088   BFD_RELOC_AARCH64_GOT_LD_PREL19
6089 ENUMDOC
6090   AArch64 Load Literal instruction, holding a 19 bit PC relative word
6091   offset of the global offset table entry for a symbol.  The lowest two
6092   bits must be zero and are not stored in the instruction, giving a 21
6093   bit signed byte offset.  This relocation type requires signed overflow
6094   checking.
6095 ENUM
6096   BFD_RELOC_AARCH64_ADR_GOT_PAGE
6097 ENUMDOC
6098   Get to the page base of the global offset table entry for a symbol as
6099   part of an ADRP instruction using a 21 bit PC relative value.Used in
6100   conjunction with BFD_RELOC_AARCH64_LD64_GOT_LO12_NC.
6101 ENUM
6102   BFD_RELOC_AARCH64_ADR_HI21_PCREL
6103 ENUMDOC
6104   AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
6105   offset, giving a 4KB aligned page base address.
6106 ENUM
6107   BFD_RELOC_AARCH64_ADR_HI21_NC_PCREL
6108 ENUMDOC
6109   AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
6110   offset, giving a 4KB aligned page base address, but with no overflow
6111   checking.
6112 ENUM
6113   BFD_RELOC_AARCH64_ADR_LO21_PCREL
6114 ENUMDOC
6115   AArch64 ADR instruction, holding a simple 21 bit pc-relative byte offset.
6116 ENUM
6117   BFD_RELOC_AARCH64_BRANCH19
6118 ENUMDOC
6119   AArch64 19 bit pc-relative conditional branch and compare & branch.
6120   The lowest two bits must be zero and are not stored in the instruction,
6121   giving a 21 bit signed byte offset.
6122 ENUM
6123   BFD_RELOC_AARCH64_CALL26
6124 ENUMDOC
6125   AArch64 26 bit pc-relative unconditional branch and link.
6126   The lowest two bits must be zero and are not stored in the instruction,
6127   giving a 28 bit signed byte offset.
6128 ENUM
6129   BFD_RELOC_AARCH64_GAS_INTERNAL_FIXUP
6130 ENUMDOC
6131   AArch64 pseudo relocation code to be used internally by the AArch64
6132   assembler and not (currently) written to any object files.
6133 ENUM
6134   BFD_RELOC_AARCH64_JUMP26
6135 ENUMDOC
6136   AArch64 26 bit pc-relative unconditional branch.
6137   The lowest two bits must be zero and are not stored in the instruction,
6138   giving a 28 bit signed byte offset.
6139 ENUM
6140   BFD_RELOC_AARCH64_LD_LO19_PCREL
6141 ENUMDOC
6142   AArch64 Load Literal instruction, holding a 19 bit pc-relative word
6143   offset.  The lowest two bits must be zero and are not stored in the
6144   instruction, giving a 21 bit signed byte offset.
6145 ENUM
6146   BFD_RELOC_AARCH64_LD64_GOT_LO12_NC
6147 ENUMDOC
6148   Unsigned 12 bit byte offset for 64 bit load/store from the page of
6149   the GOT entry for this symbol.  Used in conjunction with
6150   BFD_RELOC_AARCH64_ADR_GOTPAGE.
6151 ENUM
6152   BFD_RELOC_AARCH64_LDST_LO12
6153 ENUMDOC
6154   AArch64 unspecified load/store instruction, holding bits 0 to 11 of the
6155   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6156 ENUM
6157   BFD_RELOC_AARCH64_LDST8_LO12
6158 ENUMDOC
6159   AArch64 8-bit load/store instruction, holding bits 0 to 11 of the
6160   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6161 ENUM
6162   BFD_RELOC_AARCH64_LDST16_LO12
6163 ENUMDOC
6164   AArch64 16-bit load/store instruction, holding bits 0 to 11 of the
6165   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6166 ENUM
6167   BFD_RELOC_AARCH64_LDST32_LO12
6168 ENUMDOC
6169   AArch64 32-bit load/store instruction, holding bits 0 to 11 of the
6170   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6171 ENUM
6172   BFD_RELOC_AARCH64_LDST64_LO12
6173 ENUMDOC
6174   AArch64 64-bit load/store instruction, holding bits 0 to 11 of the
6175   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6176 ENUM
6177   BFD_RELOC_AARCH64_LDST128_LO12
6178 ENUMDOC
6179   AArch64 128-bit load/store instruction, holding bits 0 to 11 of the
6180   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6181 ENUM
6182   BFD_RELOC_AARCH64_MOVW_G0
6183 ENUMDOC
6184   AArch64 MOV[NZK] instruction with most significant bits 0 to 15
6185   of an unsigned address/value.
6186 ENUM
6187   BFD_RELOC_AARCH64_MOVW_G0_S
6188 ENUMDOC
6189   AArch64 MOV[NZ] instruction with most significant bits 0 to 15
6190   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6191   value's sign.
6192 ENUM
6193   BFD_RELOC_AARCH64_MOVW_G0_NC
6194 ENUMDOC
6195   AArch64 MOV[NZK] instruction with less significant bits 0 to 15 of
6196   an address/value.  No overflow checking.
6197 ENUM
6198   BFD_RELOC_AARCH64_MOVW_G1
6199 ENUMDOC
6200   AArch64 MOV[NZK] instruction with most significant bits 16 to 31
6201   of an unsigned address/value.
6202 ENUM
6203   BFD_RELOC_AARCH64_MOVW_G1_NC
6204 ENUMDOC
6205   AArch64 MOV[NZK] instruction with less significant bits 16 to 31
6206   of an address/value.  No overflow checking.
6207 ENUM
6208   BFD_RELOC_AARCH64_MOVW_G1_S
6209 ENUMDOC
6210   AArch64 MOV[NZ] instruction with most significant bits 16 to 31
6211   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6212   value's sign.
6213 ENUM
6214   BFD_RELOC_AARCH64_MOVW_G2
6215 ENUMDOC
6216   AArch64 MOV[NZK] instruction with most significant bits 32 to 47
6217   of an unsigned address/value.
6218 ENUM
6219   BFD_RELOC_AARCH64_MOVW_G2_NC
6220 ENUMDOC
6221   AArch64 MOV[NZK] instruction with less significant bits 32 to 47
6222   of an address/value.  No overflow checking.
6223 ENUM
6224   BFD_RELOC_AARCH64_MOVW_G2_S
6225 ENUMDOC
6226   AArch64 MOV[NZ] instruction with most significant bits 32 to 47
6227   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6228   value's sign.
6229 ENUM
6230   BFD_RELOC_AARCH64_MOVW_G3
6231 ENUMDOC
6232   AArch64 MOV[NZK] instruction with most signficant bits 48 to 64
6233   of a signed or unsigned address/value.
6234 ENUM
6235   BFD_RELOC_AARCH64_TLSDESC
6236 ENUMDOC
6237   AArch64 TLS relocation.
6238 ENUM
6239   BFD_RELOC_AARCH64_TLSDESC_ADD
6240 ENUMDOC
6241   AArch64 TLS DESC relocation.
6242 ENUM
6243   BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC
6244 ENUMDOC
6245   AArch64 TLS DESC relocation.
6246 ENUM
6247   BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE
6248 ENUMDOC
6249   AArch64 TLS DESC relocation.
6250 ENUM
6251   BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21
6252 ENUMDOC
6253   AArch64 TLS DESC relocation.
6254 ENUM
6255   BFD_RELOC_AARCH64_TLSDESC_CALL
6256 ENUMDOC
6257   AArch64 TLS DESC relocation.
6258 ENUM
6259   BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC
6260 ENUMDOC
6261   AArch64 TLS DESC relocation.
6262 ENUM
6263   BFD_RELOC_AARCH64_TLSDESC_LD64_PREL19
6264 ENUMDOC
6265   AArch64 TLS DESC relocation.
6266 ENUM
6267   BFD_RELOC_AARCH64_TLSDESC_LDR
6268 ENUMDOC
6269   AArch64 TLS DESC relocation.
6270 ENUM
6271   BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC
6272 ENUMDOC
6273   AArch64 TLS DESC relocation.
6274 ENUM
6275   BFD_RELOC_AARCH64_TLSDESC_OFF_G1
6276 ENUMDOC
6277   AArch64 TLS DESC relocation.
6278 ENUM
6279   BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC
6280 ENUMDOC
6281   Unsigned 12 bit byte offset to global offset table entry for a symbols
6282   tls_index structure.  Used in conjunction with
6283   BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21.
6284 ENUM
6285   BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21
6286 ENUMDOC
6287   Get to the page base of the global offset table entry for a symbols
6288   tls_index structure as part of an adrp instruction using a 21 bit PC
6289   relative value.  Used in conjunction with
6290   BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC.
6291 ENUM
6292   BFD_RELOC_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21
6293 ENUMDOC
6294   AArch64 TLS INITIAL EXEC relocation.
6295 ENUM
6296   BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19
6297 ENUMDOC
6298   AArch64 TLS INITIAL EXEC relocation.
6299 ENUM
6300   BFD_RELOC_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC
6301 ENUMDOC
6302   AArch64 TLS INITIAL EXEC relocation.
6303 ENUM
6304   BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G0_NC
6305 ENUMDOC
6306   AArch64 TLS INITIAL EXEC relocation.
6307 ENUM
6308   BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G1
6309 ENUMDOC
6310   AArch64 TLS INITIAL EXEC relocation.
6311 ENUM
6312   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_HI12
6313 ENUMDOC
6314   AArch64 TLS LOCAL EXEC relocation.
6315 ENUM
6316   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12
6317 ENUMDOC
6318   AArch64 TLS LOCAL EXEC relocation.
6319 ENUM
6320   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12_NC
6321 ENUMDOC
6322   AArch64 TLS LOCAL EXEC relocation.
6323 ENUM
6324   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0
6325 ENUMDOC
6326   AArch64 TLS LOCAL EXEC relocation.
6327 ENUM
6328   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0_NC
6329 ENUMDOC
6330   AArch64 TLS LOCAL EXEC relocation.
6331 ENUM
6332   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1
6333 ENUMDOC
6334   AArch64 TLS LOCAL EXEC relocation.
6335 ENUM
6336   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1_NC
6337 ENUMDOC
6338   AArch64 TLS LOCAL EXEC relocation.
6339 ENUM
6340   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G2
6341 ENUMDOC
6342   AArch64 TLS LOCAL EXEC relocation.
6343 ENUM
6344   BFD_RELOC_AARCH64_TLS_DTPMOD64
6345 ENUMDOC
6346   AArch64 TLS relocation.
6347 ENUM
6348   BFD_RELOC_AARCH64_TLS_DTPREL64
6349 ENUMDOC
6350   AArch64 TLS relocation.
6351 ENUM
6352   BFD_RELOC_AARCH64_TLS_TPREL64
6353 ENUMDOC
6354   AArch64 TLS relocation.
6355 ENUM
6356   BFD_RELOC_AARCH64_TSTBR14
6357 ENUMDOC
6358   AArch64 14 bit pc-relative test bit and branch.
6359   The lowest two bits must be zero and are not stored in the instruction,
6360   giving a 16 bit signed byte offset.
6361
6362 ENUM
6363   BFD_RELOC_TILEPRO_COPY
6364 ENUMX
6365   BFD_RELOC_TILEPRO_GLOB_DAT
6366 ENUMX
6367   BFD_RELOC_TILEPRO_JMP_SLOT
6368 ENUMX
6369   BFD_RELOC_TILEPRO_RELATIVE
6370 ENUMX
6371   BFD_RELOC_TILEPRO_BROFF_X1
6372 ENUMX
6373   BFD_RELOC_TILEPRO_JOFFLONG_X1
6374 ENUMX
6375   BFD_RELOC_TILEPRO_JOFFLONG_X1_PLT
6376 ENUMX
6377   BFD_RELOC_TILEPRO_IMM8_X0
6378 ENUMX
6379   BFD_RELOC_TILEPRO_IMM8_Y0
6380 ENUMX
6381   BFD_RELOC_TILEPRO_IMM8_X1
6382 ENUMX
6383   BFD_RELOC_TILEPRO_IMM8_Y1
6384 ENUMX
6385   BFD_RELOC_TILEPRO_DEST_IMM8_X1
6386 ENUMX
6387   BFD_RELOC_TILEPRO_MT_IMM15_X1
6388 ENUMX
6389   BFD_RELOC_TILEPRO_MF_IMM15_X1
6390 ENUMX
6391   BFD_RELOC_TILEPRO_IMM16_X0
6392 ENUMX
6393   BFD_RELOC_TILEPRO_IMM16_X1
6394 ENUMX
6395   BFD_RELOC_TILEPRO_IMM16_X0_LO
6396 ENUMX
6397   BFD_RELOC_TILEPRO_IMM16_X1_LO
6398 ENUMX
6399   BFD_RELOC_TILEPRO_IMM16_X0_HI
6400 ENUMX
6401   BFD_RELOC_TILEPRO_IMM16_X1_HI
6402 ENUMX
6403   BFD_RELOC_TILEPRO_IMM16_X0_HA
6404 ENUMX
6405   BFD_RELOC_TILEPRO_IMM16_X1_HA
6406 ENUMX
6407   BFD_RELOC_TILEPRO_IMM16_X0_PCREL
6408 ENUMX
6409   BFD_RELOC_TILEPRO_IMM16_X1_PCREL
6410 ENUMX
6411   BFD_RELOC_TILEPRO_IMM16_X0_LO_PCREL
6412 ENUMX
6413   BFD_RELOC_TILEPRO_IMM16_X1_LO_PCREL
6414 ENUMX
6415   BFD_RELOC_TILEPRO_IMM16_X0_HI_PCREL
6416 ENUMX
6417   BFD_RELOC_TILEPRO_IMM16_X1_HI_PCREL
6418 ENUMX
6419   BFD_RELOC_TILEPRO_IMM16_X0_HA_PCREL
6420 ENUMX
6421   BFD_RELOC_TILEPRO_IMM16_X1_HA_PCREL
6422 ENUMX
6423   BFD_RELOC_TILEPRO_IMM16_X0_GOT
6424 ENUMX
6425   BFD_RELOC_TILEPRO_IMM16_X1_GOT
6426 ENUMX
6427   BFD_RELOC_TILEPRO_IMM16_X0_GOT_LO
6428 ENUMX
6429   BFD_RELOC_TILEPRO_IMM16_X1_GOT_LO
6430 ENUMX
6431   BFD_RELOC_TILEPRO_IMM16_X0_GOT_HI
6432 ENUMX
6433   BFD_RELOC_TILEPRO_IMM16_X1_GOT_HI
6434 ENUMX
6435   BFD_RELOC_TILEPRO_IMM16_X0_GOT_HA
6436 ENUMX
6437   BFD_RELOC_TILEPRO_IMM16_X1_GOT_HA
6438 ENUMX
6439   BFD_RELOC_TILEPRO_MMSTART_X0
6440 ENUMX
6441   BFD_RELOC_TILEPRO_MMEND_X0
6442 ENUMX
6443   BFD_RELOC_TILEPRO_MMSTART_X1
6444 ENUMX
6445   BFD_RELOC_TILEPRO_MMEND_X1
6446 ENUMX
6447   BFD_RELOC_TILEPRO_SHAMT_X0
6448 ENUMX
6449   BFD_RELOC_TILEPRO_SHAMT_X1
6450 ENUMX
6451   BFD_RELOC_TILEPRO_SHAMT_Y0
6452 ENUMX
6453   BFD_RELOC_TILEPRO_SHAMT_Y1
6454 ENUMX
6455   BFD_RELOC_TILEPRO_TLS_GD_CALL
6456 ENUMX
6457   BFD_RELOC_TILEPRO_IMM8_X0_TLS_GD_ADD
6458 ENUMX
6459   BFD_RELOC_TILEPRO_IMM8_X1_TLS_GD_ADD
6460 ENUMX
6461   BFD_RELOC_TILEPRO_IMM8_Y0_TLS_GD_ADD
6462 ENUMX
6463   BFD_RELOC_TILEPRO_IMM8_Y1_TLS_GD_ADD
6464 ENUMX
6465   BFD_RELOC_TILEPRO_TLS_IE_LOAD
6466 ENUMX
6467   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD
6468 ENUMX
6469   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD
6470 ENUMX
6471   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_LO
6472 ENUMX
6473   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_LO
6474 ENUMX
6475   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HI
6476 ENUMX
6477   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HI
6478 ENUMX
6479   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HA
6480 ENUMX
6481   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HA
6482 ENUMX
6483   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE
6484 ENUMX
6485   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE
6486 ENUMX
6487   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_LO
6488 ENUMX
6489   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_LO
6490 ENUMX
6491   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HI
6492 ENUMX
6493   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HI
6494 ENUMX
6495   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HA
6496 ENUMX
6497   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HA
6498 ENUMX
6499   BFD_RELOC_TILEPRO_TLS_DTPMOD32
6500 ENUMX
6501   BFD_RELOC_TILEPRO_TLS_DTPOFF32
6502 ENUMX
6503   BFD_RELOC_TILEPRO_TLS_TPOFF32
6504 ENUMX
6505   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE
6506 ENUMX
6507   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE
6508 ENUMX
6509   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_LO
6510 ENUMX
6511   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_LO
6512 ENUMX
6513   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HI
6514 ENUMX
6515   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HI
6516 ENUMX
6517   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HA
6518 ENUMX
6519   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HA
6520 ENUMDOC
6521   Tilera TILEPro Relocations.
6522 ENUM
6523   BFD_RELOC_TILEGX_HW0
6524 ENUMX
6525   BFD_RELOC_TILEGX_HW1
6526 ENUMX
6527   BFD_RELOC_TILEGX_HW2
6528 ENUMX
6529   BFD_RELOC_TILEGX_HW3
6530 ENUMX
6531   BFD_RELOC_TILEGX_HW0_LAST
6532 ENUMX
6533   BFD_RELOC_TILEGX_HW1_LAST
6534 ENUMX
6535   BFD_RELOC_TILEGX_HW2_LAST
6536 ENUMX
6537   BFD_RELOC_TILEGX_COPY
6538 ENUMX
6539   BFD_RELOC_TILEGX_GLOB_DAT
6540 ENUMX
6541   BFD_RELOC_TILEGX_JMP_SLOT
6542 ENUMX
6543   BFD_RELOC_TILEGX_RELATIVE
6544 ENUMX
6545   BFD_RELOC_TILEGX_BROFF_X1
6546 ENUMX
6547   BFD_RELOC_TILEGX_JUMPOFF_X1
6548 ENUMX
6549   BFD_RELOC_TILEGX_JUMPOFF_X1_PLT
6550 ENUMX
6551   BFD_RELOC_TILEGX_IMM8_X0
6552 ENUMX
6553   BFD_RELOC_TILEGX_IMM8_Y0
6554 ENUMX
6555   BFD_RELOC_TILEGX_IMM8_X1
6556 ENUMX
6557   BFD_RELOC_TILEGX_IMM8_Y1
6558 ENUMX
6559   BFD_RELOC_TILEGX_DEST_IMM8_X1
6560 ENUMX
6561   BFD_RELOC_TILEGX_MT_IMM14_X1
6562 ENUMX
6563   BFD_RELOC_TILEGX_MF_IMM14_X1
6564 ENUMX
6565   BFD_RELOC_TILEGX_MMSTART_X0
6566 ENUMX
6567   BFD_RELOC_TILEGX_MMEND_X0
6568 ENUMX
6569   BFD_RELOC_TILEGX_SHAMT_X0
6570 ENUMX
6571   BFD_RELOC_TILEGX_SHAMT_X1
6572 ENUMX
6573   BFD_RELOC_TILEGX_SHAMT_Y0
6574 ENUMX
6575   BFD_RELOC_TILEGX_SHAMT_Y1
6576 ENUMX
6577   BFD_RELOC_TILEGX_IMM16_X0_HW0
6578 ENUMX
6579   BFD_RELOC_TILEGX_IMM16_X1_HW0
6580 ENUMX
6581   BFD_RELOC_TILEGX_IMM16_X0_HW1
6582 ENUMX
6583   BFD_RELOC_TILEGX_IMM16_X1_HW1
6584 ENUMX
6585   BFD_RELOC_TILEGX_IMM16_X0_HW2
6586 ENUMX
6587   BFD_RELOC_TILEGX_IMM16_X1_HW2
6588 ENUMX
6589   BFD_RELOC_TILEGX_IMM16_X0_HW3
6590 ENUMX
6591   BFD_RELOC_TILEGX_IMM16_X1_HW3
6592 ENUMX
6593   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST
6594 ENUMX
6595   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST
6596 ENUMX
6597   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST
6598 ENUMX
6599   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST
6600 ENUMX
6601   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST
6602 ENUMX
6603   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST
6604 ENUMX
6605   BFD_RELOC_TILEGX_IMM16_X0_HW0_PCREL
6606 ENUMX
6607   BFD_RELOC_TILEGX_IMM16_X1_HW0_PCREL
6608 ENUMX
6609   BFD_RELOC_TILEGX_IMM16_X0_HW1_PCREL
6610 ENUMX
6611   BFD_RELOC_TILEGX_IMM16_X1_HW1_PCREL
6612 ENUMX
6613   BFD_RELOC_TILEGX_IMM16_X0_HW2_PCREL
6614 ENUMX
6615   BFD_RELOC_TILEGX_IMM16_X1_HW2_PCREL
6616 ENUMX
6617   BFD_RELOC_TILEGX_IMM16_X0_HW3_PCREL
6618 ENUMX
6619   BFD_RELOC_TILEGX_IMM16_X1_HW3_PCREL
6620 ENUMX
6621   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PCREL
6622 ENUMX
6623   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PCREL
6624 ENUMX
6625   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PCREL
6626 ENUMX
6627   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PCREL
6628 ENUMX
6629   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PCREL
6630 ENUMX
6631   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PCREL
6632 ENUMX
6633   BFD_RELOC_TILEGX_IMM16_X0_HW0_GOT
6634 ENUMX
6635   BFD_RELOC_TILEGX_IMM16_X1_HW0_GOT
6636 ENUMX
6637   BFD_RELOC_TILEGX_IMM16_X0_HW0_PLT_PCREL
6638 ENUMX
6639   BFD_RELOC_TILEGX_IMM16_X1_HW0_PLT_PCREL
6640 ENUMX
6641   BFD_RELOC_TILEGX_IMM16_X0_HW1_PLT_PCREL
6642 ENUMX
6643   BFD_RELOC_TILEGX_IMM16_X1_HW1_PLT_PCREL
6644 ENUMX
6645   BFD_RELOC_TILEGX_IMM16_X0_HW2_PLT_PCREL
6646 ENUMX
6647   BFD_RELOC_TILEGX_IMM16_X1_HW2_PLT_PCREL
6648 ENUMX
6649   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_GOT
6650 ENUMX
6651   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_GOT
6652 ENUMX
6653   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_GOT
6654 ENUMX
6655   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_GOT
6656 ENUMX
6657   BFD_RELOC_TILEGX_IMM16_X0_HW3_PLT_PCREL
6658 ENUMX
6659   BFD_RELOC_TILEGX_IMM16_X1_HW3_PLT_PCREL
6660 ENUMX
6661   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_GD
6662 ENUMX
6663   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_GD
6664 ENUMX
6665   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_LE
6666 ENUMX
6667   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_LE
6668 ENUMX
6669   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_LE
6670 ENUMX
6671   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_LE
6672 ENUMX
6673   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_LE
6674 ENUMX
6675   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_LE
6676 ENUMX
6677   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_GD
6678 ENUMX
6679   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_GD
6680 ENUMX
6681   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_GD
6682 ENUMX
6683   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_GD
6684 ENUMX
6685   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_IE
6686 ENUMX
6687   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_IE
6688 ENUMX
6689   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PLT_PCREL
6690 ENUMX
6691   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PLT_PCREL
6692 ENUMX
6693   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PLT_PCREL
6694 ENUMX
6695   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PLT_PCREL
6696 ENUMX
6697   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PLT_PCREL
6698 ENUMX
6699   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PLT_PCREL
6700 ENUMX
6701   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_IE
6702 ENUMX
6703   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_IE
6704 ENUMX
6705   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_IE
6706 ENUMX
6707   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_IE
6708 ENUMX
6709   BFD_RELOC_TILEGX_TLS_DTPMOD64
6710 ENUMX
6711   BFD_RELOC_TILEGX_TLS_DTPOFF64
6712 ENUMX
6713   BFD_RELOC_TILEGX_TLS_TPOFF64
6714 ENUMX
6715   BFD_RELOC_TILEGX_TLS_DTPMOD32
6716 ENUMX
6717   BFD_RELOC_TILEGX_TLS_DTPOFF32
6718 ENUMX
6719   BFD_RELOC_TILEGX_TLS_TPOFF32
6720 ENUMX
6721   BFD_RELOC_TILEGX_TLS_GD_CALL
6722 ENUMX
6723   BFD_RELOC_TILEGX_IMM8_X0_TLS_GD_ADD
6724 ENUMX
6725   BFD_RELOC_TILEGX_IMM8_X1_TLS_GD_ADD
6726 ENUMX
6727   BFD_RELOC_TILEGX_IMM8_Y0_TLS_GD_ADD
6728 ENUMX
6729   BFD_RELOC_TILEGX_IMM8_Y1_TLS_GD_ADD
6730 ENUMX
6731   BFD_RELOC_TILEGX_TLS_IE_LOAD
6732 ENUMX
6733   BFD_RELOC_TILEGX_IMM8_X0_TLS_ADD
6734 ENUMX
6735   BFD_RELOC_TILEGX_IMM8_X1_TLS_ADD
6736 ENUMX
6737   BFD_RELOC_TILEGX_IMM8_Y0_TLS_ADD
6738 ENUMX
6739   BFD_RELOC_TILEGX_IMM8_Y1_TLS_ADD
6740 ENUMDOC
6741   Tilera TILE-Gx Relocations.
6742 ENUM
6743   BFD_RELOC_EPIPHANY_SIMM8
6744 ENUMDOC
6745   Adapteva EPIPHANY - 8 bit signed pc-relative displacement
6746 ENUM
6747   BFD_RELOC_EPIPHANY_SIMM24
6748 ENUMDOC
6749   Adapteva EPIPHANY - 24 bit signed pc-relative displacement
6750 ENUM
6751   BFD_RELOC_EPIPHANY_HIGH
6752 ENUMDOC
6753   Adapteva EPIPHANY - 16 most-significant bits of absolute address
6754 ENUM
6755   BFD_RELOC_EPIPHANY_LOW
6756 ENUMDOC
6757   Adapteva EPIPHANY - 16 least-significant bits of absolute address
6758 ENUM
6759   BFD_RELOC_EPIPHANY_SIMM11
6760 ENUMDOC
6761   Adapteva EPIPHANY - 11 bit signed number - add/sub immediate
6762 ENUM
6763   BFD_RELOC_EPIPHANY_IMM11
6764 ENUMDOC
6765   Adapteva EPIPHANY - 11 bit sign-magnitude number (ld/st displacement)
6766 ENUM
6767   BFD_RELOC_EPIPHANY_IMM8
6768 ENUMDOC
6769   Adapteva EPIPHANY - 8 bit immediate for 16 bit mov instruction.
6770
6771
6772 ENDSENUM
6773   BFD_RELOC_UNUSED
6774 CODE_FRAGMENT
6775 .
6776 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
6777 */
6778
6779 /*
6780 FUNCTION
6781         bfd_reloc_type_lookup
6782         bfd_reloc_name_lookup
6783
6784 SYNOPSIS
6785         reloc_howto_type *bfd_reloc_type_lookup
6786           (bfd *abfd, bfd_reloc_code_real_type code);
6787         reloc_howto_type *bfd_reloc_name_lookup
6788           (bfd *abfd, const char *reloc_name);
6789
6790 DESCRIPTION
6791         Return a pointer to a howto structure which, when
6792         invoked, will perform the relocation @var{code} on data from the
6793         architecture noted.
6794
6795 */
6796
6797 reloc_howto_type *
6798 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
6799 {
6800   return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
6801 }
6802
6803 reloc_howto_type *
6804 bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
6805 {
6806   return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
6807 }
6808
6809 static reloc_howto_type bfd_howto_32 =
6810 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
6811
6812 /*
6813 INTERNAL_FUNCTION
6814         bfd_default_reloc_type_lookup
6815
6816 SYNOPSIS
6817         reloc_howto_type *bfd_default_reloc_type_lookup
6818           (bfd *abfd, bfd_reloc_code_real_type  code);
6819
6820 DESCRIPTION
6821         Provides a default relocation lookup routine for any architecture.
6822
6823 */
6824
6825 reloc_howto_type *
6826 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
6827 {
6828   switch (code)
6829     {
6830     case BFD_RELOC_CTOR:
6831       /* The type of reloc used in a ctor, which will be as wide as the
6832          address - so either a 64, 32, or 16 bitter.  */
6833       switch (bfd_arch_bits_per_address (abfd))
6834         {
6835         case 64:
6836           BFD_FAIL ();
6837         case 32:
6838           return &bfd_howto_32;
6839         case 16:
6840           BFD_FAIL ();
6841         default:
6842           BFD_FAIL ();
6843         }
6844     default:
6845       BFD_FAIL ();
6846     }
6847   return NULL;
6848 }
6849
6850 /*
6851 FUNCTION
6852         bfd_get_reloc_code_name
6853
6854 SYNOPSIS
6855         const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
6856
6857 DESCRIPTION
6858         Provides a printable name for the supplied relocation code.
6859         Useful mainly for printing error messages.
6860 */
6861
6862 const char *
6863 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
6864 {
6865   if (code > BFD_RELOC_UNUSED)
6866     return 0;
6867   return bfd_reloc_code_real_names[code];
6868 }
6869
6870 /*
6871 INTERNAL_FUNCTION
6872         bfd_generic_relax_section
6873
6874 SYNOPSIS
6875         bfd_boolean bfd_generic_relax_section
6876           (bfd *abfd,
6877            asection *section,
6878            struct bfd_link_info *,
6879            bfd_boolean *);
6880
6881 DESCRIPTION
6882         Provides default handling for relaxing for back ends which
6883         don't do relaxing.
6884 */
6885
6886 bfd_boolean
6887 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
6888                            asection *section ATTRIBUTE_UNUSED,
6889                            struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
6890                            bfd_boolean *again)
6891 {
6892   if (link_info->relocatable)
6893     (*link_info->callbacks->einfo)
6894       (_("%P%F: --relax and -r may not be used together\n"));
6895
6896   *again = FALSE;
6897   return TRUE;
6898 }
6899
6900 /*
6901 INTERNAL_FUNCTION
6902         bfd_generic_gc_sections
6903
6904 SYNOPSIS
6905         bfd_boolean bfd_generic_gc_sections
6906           (bfd *, struct bfd_link_info *);
6907
6908 DESCRIPTION
6909         Provides default handling for relaxing for back ends which
6910         don't do section gc -- i.e., does nothing.
6911 */
6912
6913 bfd_boolean
6914 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
6915                          struct bfd_link_info *info ATTRIBUTE_UNUSED)
6916 {
6917   return TRUE;
6918 }
6919
6920 /*
6921 INTERNAL_FUNCTION
6922         bfd_generic_lookup_section_flags
6923
6924 SYNOPSIS
6925         bfd_boolean bfd_generic_lookup_section_flags
6926           (struct bfd_link_info *, struct flag_info *, asection *);
6927
6928 DESCRIPTION
6929         Provides default handling for section flags lookup
6930         -- i.e., does nothing.
6931         Returns FALSE if the section should be omitted, otherwise TRUE.
6932 */
6933
6934 bfd_boolean
6935 bfd_generic_lookup_section_flags (struct bfd_link_info *info ATTRIBUTE_UNUSED,
6936                                   struct flag_info *flaginfo,
6937                                   asection *section ATTRIBUTE_UNUSED)
6938 {
6939   if (flaginfo != NULL)
6940     {
6941       (*_bfd_error_handler) (_("INPUT_SECTION_FLAGS are not supported.\n"));
6942       return FALSE;
6943     }
6944   return TRUE;
6945 }
6946
6947 /*
6948 INTERNAL_FUNCTION
6949         bfd_generic_merge_sections
6950
6951 SYNOPSIS
6952         bfd_boolean bfd_generic_merge_sections
6953           (bfd *, struct bfd_link_info *);
6954
6955 DESCRIPTION
6956         Provides default handling for SEC_MERGE section merging for back ends
6957         which don't have SEC_MERGE support -- i.e., does nothing.
6958 */
6959
6960 bfd_boolean
6961 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
6962                             struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
6963 {
6964   return TRUE;
6965 }
6966
6967 /*
6968 INTERNAL_FUNCTION
6969         bfd_generic_get_relocated_section_contents
6970
6971 SYNOPSIS
6972         bfd_byte *bfd_generic_get_relocated_section_contents
6973           (bfd *abfd,
6974            struct bfd_link_info *link_info,
6975            struct bfd_link_order *link_order,
6976            bfd_byte *data,
6977            bfd_boolean relocatable,
6978            asymbol **symbols);
6979
6980 DESCRIPTION
6981         Provides default handling of relocation effort for back ends
6982         which can't be bothered to do it efficiently.
6983
6984 */
6985
6986 bfd_byte *
6987 bfd_generic_get_relocated_section_contents (bfd *abfd,
6988                                             struct bfd_link_info *link_info,
6989                                             struct bfd_link_order *link_order,
6990                                             bfd_byte *data,
6991                                             bfd_boolean relocatable,
6992                                             asymbol **symbols)
6993 {
6994   bfd *input_bfd = link_order->u.indirect.section->owner;
6995   asection *input_section = link_order->u.indirect.section;
6996   long reloc_size;
6997   arelent **reloc_vector;
6998   long reloc_count;
6999
7000   reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
7001   if (reloc_size < 0)
7002     return NULL;
7003
7004   /* Read in the section.  */
7005   if (!bfd_get_full_section_contents (input_bfd, input_section, &data))
7006     return NULL;
7007
7008   if (reloc_size == 0)
7009     return data;
7010
7011   reloc_vector = (arelent **) bfd_malloc (reloc_size);
7012   if (reloc_vector == NULL)
7013     return NULL;
7014
7015   reloc_count = bfd_canonicalize_reloc (input_bfd,
7016                                         input_section,
7017                                         reloc_vector,
7018                                         symbols);
7019   if (reloc_count < 0)
7020     goto error_return;
7021
7022   if (reloc_count > 0)
7023     {
7024       arelent **parent;
7025       for (parent = reloc_vector; *parent != NULL; parent++)
7026         {
7027           char *error_message = NULL;
7028           asymbol *symbol;
7029           bfd_reloc_status_type r;
7030
7031           symbol = *(*parent)->sym_ptr_ptr;
7032           if (symbol->section && discarded_section (symbol->section))
7033             {
7034               bfd_byte *p;
7035               static reloc_howto_type none_howto
7036                 = HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
7037                          "unused", FALSE, 0, 0, FALSE);
7038
7039               p = data + (*parent)->address * bfd_octets_per_byte (input_bfd);
7040               _bfd_clear_contents ((*parent)->howto, input_bfd, input_section,
7041                                    p);
7042               (*parent)->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
7043               (*parent)->addend = 0;
7044               (*parent)->howto = &none_howto;
7045               r = bfd_reloc_ok;
7046             }
7047           else
7048             r = bfd_perform_relocation (input_bfd,
7049                                         *parent,
7050                                         data,
7051                                         input_section,
7052                                         relocatable ? abfd : NULL,
7053                                         &error_message);
7054
7055           if (relocatable)
7056             {
7057               asection *os = input_section->output_section;
7058
7059               /* A partial link, so keep the relocs.  */
7060               os->orelocation[os->reloc_count] = *parent;
7061               os->reloc_count++;
7062             }
7063
7064           if (r != bfd_reloc_ok)
7065             {
7066               switch (r)
7067                 {
7068                 case bfd_reloc_undefined:
7069                   if (!((*link_info->callbacks->undefined_symbol)
7070                         (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
7071                          input_bfd, input_section, (*parent)->address,
7072                          TRUE)))
7073                     goto error_return;
7074                   break;
7075                 case bfd_reloc_dangerous:
7076                   BFD_ASSERT (error_message != NULL);
7077                   if (!((*link_info->callbacks->reloc_dangerous)
7078                         (link_info, error_message, input_bfd, input_section,
7079                          (*parent)->address)))
7080                     goto error_return;
7081                   break;
7082                 case bfd_reloc_overflow:
7083                   if (!((*link_info->callbacks->reloc_overflow)
7084                         (link_info, NULL,
7085                          bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
7086                          (*parent)->howto->name, (*parent)->addend,
7087                          input_bfd, input_section, (*parent)->address)))
7088                     goto error_return;
7089                   break;
7090                 case bfd_reloc_outofrange:
7091                   /* PR ld/13730:
7092                      This error can result when processing some partially
7093                      complete binaries.  Do not abort, but issue an error
7094                      message instead.  */
7095                   link_info->callbacks->einfo
7096                     (_("%X%P: %B(%A): relocation \"%R\" goes out of range\n"),
7097                      abfd, input_section, * parent);
7098                   goto error_return;
7099
7100                 default:
7101                   abort ();
7102                   break;
7103                 }
7104
7105             }
7106         }
7107     }
7108
7109   free (reloc_vector);
7110   return data;
7111
7112 error_return:
7113   free (reloc_vector);
7114   return NULL;
7115 }