bfd/reloc.c

   1 /* BFD support for handling relocation entries.
   2    Copyright (C) 1990-2015 Free Software Foundation, Inc.
   3    Written by Cygnus Support.
   4
   5    This file is part of BFD, the Binary File Descriptor library.
   6
   7    This program is free software; you can redistribute it and/or modify
   8    it under the terms of the GNU General Public License as published by
   9    the Free Software Foundation; either version 3 of the License, or
  10    (at your option) any later version.
  11
  12    This program is distributed in the hope that it will be useful,
  13    but WITHOUT ANY WARRANTY; without even the implied warranty of
  14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15    GNU General Public License for more details.
  16
  17    You should have received a copy of the GNU General Public License
  18    along with this program; if not, write to the Free Software
  19    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
  20    MA 02110-1301, USA.  */
  21
  22 /*
  23 SECTION
  24         Relocations
  25
  26         BFD maintains relocations in much the same way it maintains
  27         symbols: they are left alone until required, then read in
  28         en-masse and translated into an internal form.  A common
  29         routine <<bfd_perform_relocation>> acts upon the
  30         canonical form to do the fixup.
  31
  32         Relocations are maintained on a per section basis,
  33         while symbols are maintained on a per BFD basis.
  34
  35         All that a back end has to do to fit the BFD interface is to create
  36         a <<struct reloc_cache_entry>> for each relocation
  37         in a particular section, and fill in the right bits of the structures.
  38
  39 @menu
  40 @* typedef arelent::
  41 @* howto manager::
  42 @end menu
  43
  44 */
  45
  46 /* DO compile in the reloc_code name table from libbfd.h.  */
  47 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
  48
  49 #include "sysdep.h"
  50 #include "bfd.h"
  51 #include "bfdlink.h"
  52 #include "libbfd.h"
  53 /*
  54 DOCDD
  55 INODE
  56         typedef arelent, howto manager, Relocations, Relocations
  57
  58 SUBSECTION
  59         typedef arelent
  60
  61         This is the structure of a relocation entry:
  62
  63 CODE_FRAGMENT
  64 .
  65 .typedef enum bfd_reloc_status
  66 .{
  67 .  {* No errors detected.  *}
  68 .  bfd_reloc_ok,
  69 .
  70 .  {* The relocation was performed, but there was an overflow.  *}
  71 .  bfd_reloc_overflow,
  72 .
  73 .  {* The address to relocate was not within the section supplied.  *}
  74 .  bfd_reloc_outofrange,
  75 .
  76 .  {* Used by special functions.  *}
  77 .  bfd_reloc_continue,
  78 .
  79 .  {* Unsupported relocation size requested.  *}
  80 .  bfd_reloc_notsupported,
  81 .
  82 .  {* Unused.  *}
  83 .  bfd_reloc_other,
  84 .
  85 .  {* The symbol to relocate against was undefined.  *}
  86 .  bfd_reloc_undefined,
  87 .
  88 .  {* The relocation was performed, but may not be ok - presently
  89 .     generated only when linking i960 coff files with i960 b.out
  90 .     symbols.  If this type is returned, the error_message argument
  91 .     to bfd_perform_relocation will be set.  *}
  92 .  bfd_reloc_dangerous
  93 . }
  94 . bfd_reloc_status_type;
  95 .
  96 .
  97 .typedef struct reloc_cache_entry
  98 .{
  99 .  {* A pointer into the canonical table of pointers.  *}
 100 .  struct bfd_symbol **sym_ptr_ptr;
 101 .
 102 .  {* offset in section.  *}
 103 .  bfd_size_type address;
 104 .
 105 .  {* addend for relocation value.  *}
 106 .  bfd_vma addend;
 107 .
 108 .  {* Pointer to how to perform the required relocation.  *}
 109 .  reloc_howto_type *howto;
 110 .
 111 .}
 112 .arelent;
 113 .
 114 */
 115
 116 /*
 117 DESCRIPTION
 118
 119         Here is a description of each of the fields within an <<arelent>>:
 120
 121         o <<sym_ptr_ptr>>
 122
 123         The symbol table pointer points to a pointer to the symbol
 124         associated with the relocation request.  It is the pointer
 125         into the table returned by the back end's
 126         <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
 127         referenced through a pointer to a pointer so that tools like
 128         the linker can fix up all the symbols of the same name by
 129         modifying only one pointer. The relocation routine looks in
 130         the symbol and uses the base of the section the symbol is
 131         attached to and the value of the symbol as the initial
 132         relocation offset. If the symbol pointer is zero, then the
 133         section provided is looked up.
 134
 135         o <<address>>
 136
 137         The <<address>> field gives the offset in bytes from the base of
 138         the section data which owns the relocation record to the first
 139         byte of relocatable information. The actual data relocated
 140         will be relative to this point; for example, a relocation
 141         type which modifies the bottom two bytes of a four byte word
 142         would not touch the first byte pointed to in a big endian
 143         world.
 144
 145         o <<addend>>
 146
 147         The <<addend>> is a value provided by the back end to be added (!)
 148         to the relocation offset. Its interpretation is dependent upon
 149         the howto. For example, on the 68k the code:
 150
 151 |        char foo[];
 152 |        main()
 153 |                {
 154 |                return foo[0x12345678];
 155 |                }
 156
 157         Could be compiled into:
 158
 159 |        linkw fp,#-4
 160 |        moveb @@#12345678,d0
 161 |        extbl d0
 162 |        unlk fp
 163 |        rts
 164
 165         This could create a reloc pointing to <<foo>>, but leave the
 166         offset in the data, something like:
 167
 168 |RELOCATION RECORDS FOR [.text]:
 169 |offset   type      value
 170 |00000006 32        _foo
 171 |
 172 |00000000 4e56 fffc          ; linkw fp,#-4
 173 |00000004 1039 1234 5678     ; moveb @@#12345678,d0
 174 |0000000a 49c0               ; extbl d0
 175 |0000000c 4e5e               ; unlk fp
 176 |0000000e 4e75               ; rts
 177
 178         Using coff and an 88k, some instructions don't have enough
 179         space in them to represent the full address range, and
 180         pointers have to be loaded in two parts. So you'd get something like:
 181
 182 |        or.u     r13,r0,hi16(_foo+0x12345678)
 183 |        ld.b     r2,r13,lo16(_foo+0x12345678)
 184 |        jmp      r1
 185
 186         This should create two relocs, both pointing to <<_foo>>, and with
 187         0x12340000 in their addend field. The data would consist of:
 188
 189 |RELOCATION RECORDS FOR [.text]:
 190 |offset   type      value
 191 |00000002 HVRT16    _foo+0x12340000
 192 |00000006 LVRT16    _foo+0x12340000
 193 |
 194 |00000000 5da05678           ; or.u r13,r0,0x5678
 195 |00000004 1c4d5678           ; ld.b r2,r13,0x5678
 196 |00000008 f400c001           ; jmp r1
 197
 198         The relocation routine digs out the value from the data, adds
 199         it to the addend to get the original offset, and then adds the
 200         value of <<_foo>>. Note that all 32 bits have to be kept around
 201         somewhere, to cope with carry from bit 15 to bit 16.
 202
 203         One further example is the sparc and the a.out format. The
 204         sparc has a similar problem to the 88k, in that some
 205         instructions don't have room for an entire offset, but on the
 206         sparc the parts are created in odd sized lumps. The designers of
 207         the a.out format chose to not use the data within the section
 208         for storing part of the offset; all the offset is kept within
 209         the reloc. Anything in the data should be ignored.
 210
 211 |        save %sp,-112,%sp
 212 |        sethi %hi(_foo+0x12345678),%g2
 213 |        ldsb [%g2+%lo(_foo+0x12345678)],%i0
 214 |        ret
 215 |        restore
 216
 217         Both relocs contain a pointer to <<foo>>, and the offsets
 218         contain junk.
 219
 220 |RELOCATION RECORDS FOR [.text]:
 221 |offset   type      value
 222 |00000004 HI22      _foo+0x12345678
 223 |00000008 LO10      _foo+0x12345678
 224 |
 225 |00000000 9de3bf90     ; save %sp,-112,%sp
 226 |00000004 05000000     ; sethi %hi(_foo+0),%g2
 227 |00000008 f048a000     ; ldsb [%g2+%lo(_foo+0)],%i0
 228 |0000000c 81c7e008     ; ret
 229 |00000010 81e80000     ; restore
 230
 231         o <<howto>>
 232
 233         The <<howto>> field can be imagined as a
 234         relocation instruction. It is a pointer to a structure which
 235         contains information on what to do with all of the other
 236         information in the reloc record and data section. A back end
 237         would normally have a relocation instruction set and turn
 238         relocations into pointers to the correct structure on input -
 239         but it would be possible to create each howto field on demand.
 240
 241 */
 242
 243 /*
 244 SUBSUBSECTION
 245         <<enum complain_overflow>>
 246
 247         Indicates what sort of overflow checking should be done when
 248         performing a relocation.
 249
 250 CODE_FRAGMENT
 251 .
 252 .enum complain_overflow
 253 .{
 254 .  {* Do not complain on overflow.  *}
 255 .  complain_overflow_dont,
 256 .
 257 .  {* Complain if the value overflows when considered as a signed
 258 .     number one bit larger than the field.  ie. A bitfield of N bits
 259 .     is allowed to represent -2**n to 2**n-1.  *}
 260 .  complain_overflow_bitfield,
 261 .
 262 .  {* Complain if the value overflows when considered as a signed
 263 .     number.  *}
 264 .  complain_overflow_signed,
 265 .
 266 .  {* Complain if the value overflows when considered as an
 267 .     unsigned number.  *}
 268 .  complain_overflow_unsigned
 269 .};
 270
 271 */
 272
 273 /*
 274 SUBSUBSECTION
 275         <<reloc_howto_type>>
 276
 277         The <<reloc_howto_type>> is a structure which contains all the
 278         information that libbfd needs to know to tie up a back end's data.
 279
 280 CODE_FRAGMENT
 281 .struct bfd_symbol;             {* Forward declaration.  *}
 282 .
 283 .struct reloc_howto_struct
 284 .{
 285 .  {*  The type field has mainly a documentary use - the back end can
 286 .      do what it wants with it, though normally the back end's
 287 .      external idea of what a reloc number is stored
 288 .      in this field.  For example, a PC relative word relocation
 289 .      in a coff environment has the type 023 - because that's
 290 .      what the outside world calls a R_PCRWORD reloc.  *}
 291 .  unsigned int type;
 292 .
 293 .  {*  The value the final relocation is shifted right by.  This drops
 294 .      unwanted data from the relocation.  *}
 295 .  unsigned int rightshift;
 296 .
 297 .  {*  The size of the item to be relocated.  This is *not* a
 298 .      power-of-two measure.  To get the number of bytes operated
 299 .      on by a type of relocation, use bfd_get_reloc_size.  *}
 300 .  int size;
 301 .
 302 .  {*  The number of bits in the item to be relocated.  This is used
 303 .      when doing overflow checking.  *}
 304 .  unsigned int bitsize;
 305 .
 306 .  {*  The relocation is relative to the field being relocated.  *}
 307 .  bfd_boolean pc_relative;
 308 .
 309 .  {*  The bit position of the reloc value in the destination.
 310 .      The relocated value is left shifted by this amount.  *}
 311 .  unsigned int bitpos;
 312 .
 313 .  {* What type of overflow error should be checked for when
 314 .     relocating.  *}
 315 .  enum complain_overflow complain_on_overflow;
 316 .
 317 .  {* If this field is non null, then the supplied function is
 318 .     called rather than the normal function.  This allows really
 319 .     strange relocation methods to be accommodated (e.g., i960 callj
 320 .     instructions).  *}
 321 .  bfd_reloc_status_type (*special_function)
 322 .    (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
 323 .     bfd *, char **);
 324 .
 325 .  {* The textual name of the relocation type.  *}
 326 .  char *name;
 327 .
 328 .  {* Some formats record a relocation addend in the section contents
 329 .     rather than with the relocation.  For ELF formats this is the
 330 .     distinction between USE_REL and USE_RELA (though the code checks
 331 .     for USE_REL == 1/0).  The value of this field is TRUE if the
 332 .     addend is recorded with the section contents; when performing a
 333 .     partial link (ld -r) the section contents (the data) will be
 334 .     modified.  The value of this field is FALSE if addends are
 335 .     recorded with the relocation (in arelent.addend); when performing
 336 .     a partial link the relocation will be modified.
 337 .     All relocations for all ELF USE_RELA targets should set this field
 338 .     to FALSE (values of TRUE should be looked on with suspicion).
 339 .     However, the converse is not true: not all relocations of all ELF
 340 .     USE_REL targets set this field to TRUE.  Why this is so is peculiar
 341 .     to each particular target.  For relocs that aren't used in partial
 342 .     links (e.g. GOT stuff) it doesn't matter what this is set to.  *}
 343 .  bfd_boolean partial_inplace;
 344 .
 345 .  {* src_mask selects the part of the instruction (or data) to be used
 346 .     in the relocation sum.  If the target relocations don't have an
 347 .     addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
 348 .     dst_mask to extract the addend from the section contents.  If
 349 .     relocations do have an addend in the reloc, eg. ELF USE_RELA, this
 350 .     field should be zero.  Non-zero values for ELF USE_RELA targets are
 351 .     bogus as in those cases the value in the dst_mask part of the
 352 .     section contents should be treated as garbage.  *}
 353 .  bfd_vma src_mask;
 354 .
 355 .  {* dst_mask selects which parts of the instruction (or data) are
 356 .     replaced with a relocated value.  *}
 357 .  bfd_vma dst_mask;
 358 .
 359 .  {* When some formats create PC relative instructions, they leave
 360 .     the value of the pc of the place being relocated in the offset
 361 .     slot of the instruction, so that a PC relative relocation can
 362 .     be made just by adding in an ordinary offset (e.g., sun3 a.out).
 363 .     Some formats leave the displacement part of an instruction
 364 .     empty (e.g., m88k bcs); this flag signals the fact.  *}
 365 .  bfd_boolean pcrel_offset;
 366 .};
 367 .
 368 */
 369
 370 /*
 371 FUNCTION
 372         The HOWTO Macro
 373
 374 DESCRIPTION
 375         The HOWTO define is horrible and will go away.
 376
 377 .#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
 378 .  { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
 379
 380 DESCRIPTION
 381         And will be replaced with the totally magic way. But for the
 382         moment, we are compatible, so do it this way.
 383
 384 .#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
 385 .  HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
 386 .         NAME, FALSE, 0, 0, IN)
 387 .
 388
 389 DESCRIPTION
 390         This is used to fill in an empty howto entry in an array.
 391
 392 .#define EMPTY_HOWTO(C) \
 393 .  HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
 394 .         NULL, FALSE, 0, 0, FALSE)
 395 .
 396
 397 DESCRIPTION
 398         Helper routine to turn a symbol into a relocation value.
 399
 400 .#define HOWTO_PREPARE(relocation, symbol)               \
 401 .  {                                                     \
 402 .    if (symbol != NULL)                                 \
 403 .      {                                                 \
 404 .        if (bfd_is_com_section (symbol->section))       \
 405 .          {                                             \
 406 .            relocation = 0;                             \
 407 .          }                                             \
 408 .        else                                            \
 409 .          {                                             \
 410 .            relocation = symbol->value;                 \
 411 .          }                                             \
 412 .      }                                                 \
 413 .  }
 414 .
 415 */
 416
 417 /*
 418 FUNCTION
 419         bfd_get_reloc_size
 420
 421 SYNOPSIS
 422         unsigned int bfd_get_reloc_size (reloc_howto_type *);
 423
 424 DESCRIPTION
 425         For a reloc_howto_type that operates on a fixed number of bytes,
 426         this returns the number of bytes operated on.
 427  */
 428
 429 unsigned int
 430 bfd_get_reloc_size (reloc_howto_type *howto)
 431 {
 432   switch (howto->size)
 433     {
 434     case 0: return 1;
 435     case 1: return 2;
 436     case 2: return 4;
 437     case 3: return 0;
 438     case 4: return 8;
 439     case 8: return 16;
 440     case -1: return 2;
 441     case -2: return 4;
 442     default: abort ();
 443     }
 444 }
 445
 446 /*
 447 TYPEDEF
 448         arelent_chain
 449
 450 DESCRIPTION
 451
 452         How relocs are tied together in an <<asection>>:
 453
 454 .typedef struct relent_chain
 455 .{
 456 .  arelent relent;
 457 .  struct relent_chain *next;
 458 .}
 459 .arelent_chain;
 460 .
 461 */
 462
 463 /* N_ONES produces N one bits, without overflowing machine arithmetic.  */
 464 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
 465
 466 /*
 467 FUNCTION
 468         bfd_check_overflow
 469
 470 SYNOPSIS
 471         bfd_reloc_status_type bfd_check_overflow
 472           (enum complain_overflow how,
 473            unsigned int bitsize,
 474            unsigned int rightshift,
 475            unsigned int addrsize,
 476            bfd_vma relocation);
 477
 478 DESCRIPTION
 479         Perform overflow checking on @var{relocation} which has
 480         @var{bitsize} significant bits and will be shifted right by
 481         @var{rightshift} bits, on a machine with addresses containing
 482         @var{addrsize} significant bits.  The result is either of
 483         @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
 484
 485 */
 486
 487 bfd_reloc_status_type
 488 bfd_check_overflow (enum complain_overflow how,
 489                     unsigned int bitsize,
 490                     unsigned int rightshift,
 491                     unsigned int addrsize,
 492                     bfd_vma relocation)
 493 {
 494   bfd_vma fieldmask, addrmask, signmask, ss, a;
 495   bfd_reloc_status_type flag = bfd_reloc_ok;
 496
 497   /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
 498      we'll be permissive: extra bits in the field mask will
 499      automatically extend the address mask for purposes of the
 500      overflow check.  */
 501   fieldmask = N_ONES (bitsize);
 502   signmask = ~fieldmask;
 503   addrmask = N_ONES (addrsize) | (fieldmask << rightshift);
 504   a = (relocation & addrmask) >> rightshift;
 505
 506   switch (how)
 507     {
 508     case complain_overflow_dont:
 509       break;
 510
 511     case complain_overflow_signed:
 512       /* If any sign bits are set, all sign bits must be set.  That
 513          is, A must be a valid negative address after shifting.  */
 514       signmask = ~ (fieldmask >> 1);
 515       /* Fall thru */
 516
 517     case complain_overflow_bitfield:
 518       /* Bitfields are sometimes signed, sometimes unsigned.  We
 519          explicitly allow an address wrap too, which means a bitfield
 520          of n bits is allowed to store -2**n to 2**n-1.  Thus overflow
 521          if the value has some, but not all, bits set outside the
 522          field.  */
 523       ss = a & signmask;
 524       if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
 525         flag = bfd_reloc_overflow;
 526       break;
 527
 528     case complain_overflow_unsigned:
 529       /* We have an overflow if the address does not fit in the field.  */
 530       if ((a & signmask) != 0)
 531         flag = bfd_reloc_overflow;
 532       break;
 533
 534     default:
 535       abort ();
 536     }
 537
 538   return flag;
 539 }
 540
 541 /*
 542 FUNCTION
 543         bfd_perform_relocation
 544
 545 SYNOPSIS
 546         bfd_reloc_status_type bfd_perform_relocation
 547           (bfd *abfd,
 548            arelent *reloc_entry,
 549            void *data,
 550            asection *input_section,
 551            bfd *output_bfd,
 552            char **error_message);
 553
 554 DESCRIPTION
 555         If @var{output_bfd} is supplied to this function, the
 556         generated image will be relocatable; the relocations are
 557         copied to the output file after they have been changed to
 558         reflect the new state of the world. There are two ways of
 559         reflecting the results of partial linkage in an output file:
 560         by modifying the output data in place, and by modifying the
 561         relocation record.  Some native formats (e.g., basic a.out and
 562         basic coff) have no way of specifying an addend in the
 563         relocation type, so the addend has to go in the output data.
 564         This is no big deal since in these formats the output data
 565         slot will always be big enough for the addend. Complex reloc
 566         types with addends were invented to solve just this problem.
 567         The @var{error_message} argument is set to an error message if
 568         this return @code{bfd_reloc_dangerous}.
 569
 570 */
 571
 572 bfd_reloc_status_type
 573 bfd_perform_relocation (bfd *abfd,
 574                         arelent *reloc_entry,
 575                         void *data,
 576                         asection *input_section,
 577                         bfd *output_bfd,
 578                         char **error_message)
 579 {
 580   bfd_vma relocation;
 581   bfd_reloc_status_type flag = bfd_reloc_ok;
 582   bfd_size_type octets;
 583   bfd_vma output_base = 0;
 584   reloc_howto_type *howto = reloc_entry->howto;
 585   asection *reloc_target_output_section;
 586   asymbol *symbol;
 587
 588   symbol = *(reloc_entry->sym_ptr_ptr);
 589   if (bfd_is_abs_section (symbol->section)
 590       && output_bfd != NULL)
 591     {
 592       reloc_entry->address += input_section->output_offset;
 593       return bfd_reloc_ok;
 594     }
 595
 596   /* PR 17512: file: 0f67f69d.  */
 597   if (howto == NULL)
 598     return bfd_reloc_undefined;
 599
 600   /* If we are not producing relocatable output, return an error if
 601      the symbol is not defined.  An undefined weak symbol is
 602      considered to have a value of zero (SVR4 ABI, p. 4-27).  */
 603   if (bfd_is_und_section (symbol->section)
 604       && (symbol->flags & BSF_WEAK) == 0
 605       && output_bfd == NULL)
 606     flag = bfd_reloc_undefined;
 607
 608   /* If there is a function supplied to handle this relocation type,
 609      call it.  It'll return `bfd_reloc_continue' if further processing
 610      can be done.  */
 611   if (howto->special_function)
 612     {
 613       bfd_reloc_status_type cont;
 614       cont = howto->special_function (abfd, reloc_entry, symbol, data,
 615                                       input_section, output_bfd,
 616                                       error_message);
 617       if (cont != bfd_reloc_continue)
 618         return cont;
 619     }
 620
 621   /* Is the address of the relocation really within the section?
 622      Include the size of the reloc in the test for out of range addresses.
 623      PR 17512: file: c146ab8b, 46dff27f, 38e53ebf.  */
 624   octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 625   if (octets + bfd_get_reloc_size (howto)
 626       > bfd_get_section_limit_octets (abfd, input_section))
 627     return bfd_reloc_outofrange;
 628
 629   /* Work out which section the relocation is targeted at and the
 630      initial relocation command value.  */
 631
 632   /* Get symbol value.  (Common symbols are special.)  */
 633   if (bfd_is_com_section (symbol->section))
 634     relocation = 0;
 635   else
 636     relocation = symbol->value;
 637
 638   reloc_target_output_section = symbol->section->output_section;
 639
 640   /* Convert input-section-relative symbol value to absolute.  */
 641   if ((output_bfd && ! howto->partial_inplace)
 642       || reloc_target_output_section == NULL)
 643     output_base = 0;
 644   else
 645     output_base = reloc_target_output_section->vma;
 646
 647   relocation += output_base + symbol->section->output_offset;
 648
 649   /* Add in supplied addend.  */
 650   relocation += reloc_entry->addend;
 651
 652   /* Here the variable relocation holds the final address of the
 653      symbol we are relocating against, plus any addend.  */
 654
 655   if (howto->pc_relative)
 656     {
 657       /* This is a PC relative relocation.  We want to set RELOCATION
 658          to the distance between the address of the symbol and the
 659          location.  RELOCATION is already the address of the symbol.
 660
 661          We start by subtracting the address of the section containing
 662          the location.
 663
 664          If pcrel_offset is set, we must further subtract the position
 665          of the location within the section.  Some targets arrange for
 666          the addend to be the negative of the position of the location
 667          within the section; for example, i386-aout does this.  For
 668          i386-aout, pcrel_offset is FALSE.  Some other targets do not
 669          include the position of the location; for example, m88kbcs,
 670          or ELF.  For those targets, pcrel_offset is TRUE.
 671
 672          If we are producing relocatable output, then we must ensure
 673          that this reloc will be correctly computed when the final
 674          relocation is done.  If pcrel_offset is FALSE we want to wind
 675          up with the negative of the location within the section,
 676          which means we must adjust the existing addend by the change
 677          in the location within the section.  If pcrel_offset is TRUE
 678          we do not want to adjust the existing addend at all.
 679
 680          FIXME: This seems logical to me, but for the case of
 681          producing relocatable output it is not what the code
 682          actually does.  I don't want to change it, because it seems
 683          far too likely that something will break.  */
 684
 685       relocation -=
 686         input_section->output_section->vma + input_section->output_offset;
 687
 688       if (howto->pcrel_offset)
 689         relocation -= reloc_entry->address;
 690     }
 691
 692   if (output_bfd != NULL)
 693     {
 694       if (! howto->partial_inplace)
 695         {
 696           /* This is a partial relocation, and we want to apply the relocation
 697              to the reloc entry rather than the raw data. Modify the reloc
 698              inplace to reflect what we now know.  */
 699           reloc_entry->addend = relocation;
 700           reloc_entry->address += input_section->output_offset;
 701           return flag;
 702         }
 703       else
 704         {
 705           /* This is a partial relocation, but inplace, so modify the
 706              reloc record a bit.
 707
 708              If we've relocated with a symbol with a section, change
 709              into a ref to the section belonging to the symbol.  */
 710
 711           reloc_entry->address += input_section->output_offset;
 712
 713           /* WTF?? */
 714           if (abfd->xvec->flavour == bfd_target_coff_flavour
 715               && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
 716               && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
 717             {
 718               /* For m68k-coff, the addend was being subtracted twice during
 719                  relocation with -r.  Removing the line below this comment
 720                  fixes that problem; see PR 2953.
 721
 722 However, Ian wrote the following, regarding removing the line below,
 723 which explains why it is still enabled:  --djm
 724
 725 If you put a patch like that into BFD you need to check all the COFF
 726 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
 727 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
 728 problem in a different way.  There may very well be a reason that the
 729 code works as it does.
 730
 731 Hmmm.  The first obvious point is that bfd_perform_relocation should
 732 not have any tests that depend upon the flavour.  It's seem like
 733 entirely the wrong place for such a thing.  The second obvious point
 734 is that the current code ignores the reloc addend when producing
 735 relocatable output for COFF.  That's peculiar.  In fact, I really
 736 have no idea what the point of the line you want to remove is.
 737
 738 A typical COFF reloc subtracts the old value of the symbol and adds in
 739 the new value to the location in the object file (if it's a pc
 740 relative reloc it adds the difference between the symbol value and the
 741 location).  When relocating we need to preserve that property.
 742
 743 BFD handles this by setting the addend to the negative of the old
 744 value of the symbol.  Unfortunately it handles common symbols in a
 745 non-standard way (it doesn't subtract the old value) but that's a
 746 different story (we can't change it without losing backward
 747 compatibility with old object files) (coff-i386 does subtract the old
 748 value, to be compatible with existing coff-i386 targets, like SCO).
 749
 750 So everything works fine when not producing relocatable output.  When
 751 we are producing relocatable output, logically we should do exactly
 752 what we do when not producing relocatable output.  Therefore, your
 753 patch is correct.  In fact, it should probably always just set
 754 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
 755 add the value into the object file.  This won't hurt the COFF code,
 756 which doesn't use the addend; I'm not sure what it will do to other
 757 formats (the thing to check for would be whether any formats both use
 758 the addend and set partial_inplace).
 759
 760 When I wanted to make coff-i386 produce relocatable output, I ran
 761 into the problem that you are running into: I wanted to remove that
 762 line.  Rather than risk it, I made the coff-i386 relocs use a special
 763 function; it's coff_i386_reloc in coff-i386.c.  The function
 764 specifically adds the addend field into the object file, knowing that
 765 bfd_perform_relocation is not going to.  If you remove that line, then
 766 coff-i386.c will wind up adding the addend field in twice.  It's
 767 trivial to fix; it just needs to be done.
 768
 769 The problem with removing the line is just that it may break some
 770 working code.  With BFD it's hard to be sure of anything.  The right
 771 way to deal with this is simply to build and test at least all the
 772 supported COFF targets.  It should be straightforward if time and disk
 773 space consuming.  For each target:
 774     1) build the linker
 775     2) generate some executable, and link it using -r (I would
 776        probably use paranoia.o and link against newlib/libc.a, which
 777        for all the supported targets would be available in
 778        /usr/cygnus/progressive/H-host/target/lib/libc.a).
 779     3) make the change to reloc.c
 780     4) rebuild the linker
 781     5) repeat step 2
 782     6) if the resulting object files are the same, you have at least
 783        made it no worse
 784     7) if they are different you have to figure out which version is
 785        right
 786 */
 787               relocation -= reloc_entry->addend;
 788               reloc_entry->addend = 0;
 789             }
 790           else
 791             {
 792               reloc_entry->addend = relocation;
 793             }
 794         }
 795     }
 796
 797   /* FIXME: This overflow checking is incomplete, because the value
 798      might have overflowed before we get here.  For a correct check we
 799      need to compute the value in a size larger than bitsize, but we
 800      can't reasonably do that for a reloc the same size as a host
 801      machine word.
 802      FIXME: We should also do overflow checking on the result after
 803      adding in the value contained in the object file.  */
 804   if (howto->complain_on_overflow != complain_overflow_dont
 805       && flag == bfd_reloc_ok)
 806     flag = bfd_check_overflow (howto->complain_on_overflow,
 807                                howto->bitsize,
 808                                howto->rightshift,
 809                                bfd_arch_bits_per_address (abfd),
 810                                relocation);
 811
 812   /* Either we are relocating all the way, or we don't want to apply
 813      the relocation to the reloc entry (probably because there isn't
 814      any room in the output format to describe addends to relocs).  */
 815
 816   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
 817      (OSF version 1.3, compiler version 3.11).  It miscompiles the
 818      following program:
 819
 820      struct str
 821      {
 822        unsigned int i0;
 823      } s = { 0 };
 824
 825      int
 826      main ()
 827      {
 828        unsigned long x;
 829
 830        x = 0x100000000;
 831        x <<= (unsigned long) s.i0;
 832        if (x == 0)
 833          printf ("failed\n");
 834        else
 835          printf ("succeeded (%lx)\n", x);
 836      }
 837      */
 838
 839   relocation >>= (bfd_vma) howto->rightshift;
 840
 841   /* Shift everything up to where it's going to be used.  */
 842   relocation <<= (bfd_vma) howto->bitpos;
 843
 844   /* Wait for the day when all have the mask in them.  */
 845
 846   /* What we do:
 847      i instruction to be left alone
 848      o offset within instruction
 849      r relocation offset to apply
 850      S src mask
 851      D dst mask
 852      N ~dst mask
 853      A part 1
 854      B part 2
 855      R result
 856
 857      Do this:
 858      ((  i i i i i o o o o o  from bfd_get<size>
 859      and           S S S S S) to get the size offset we want
 860      +   r r r r r r r r r r) to get the final value to place
 861      and           D D D D D  to chop to right size
 862      -----------------------
 863      =             A A A A A
 864      And this:
 865      (   i i i i i o o o o o  from bfd_get<size>
 866      and N N N N N          ) get instruction
 867      -----------------------
 868      =   B B B B B
 869
 870      And then:
 871      (   B B B B B
 872      or            A A A A A)
 873      -----------------------
 874      =   R R R R R R R R R R  put into bfd_put<size>
 875      */
 876
 877 #define DOIT(x) \
 878   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
 879
 880   switch (howto->size)
 881     {
 882     case 0:
 883       {
 884         char x = bfd_get_8 (abfd, (char *) data + octets);
 885         DOIT (x);
 886         bfd_put_8 (abfd, x, (unsigned char *) data + octets);
 887       }
 888       break;
 889
 890     case 1:
 891       {
 892         short x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 893         DOIT (x);
 894         bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data + octets);
 895       }
 896       break;
 897     case 2:
 898       {
 899         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 900         DOIT (x);
 901         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 902       }
 903       break;
 904     case -2:
 905       {
 906         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 907         relocation = -relocation;
 908         DOIT (x);
 909         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 910       }
 911       break;
 912
 913     case -1:
 914       {
 915         long x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 916         relocation = -relocation;
 917         DOIT (x);
 918         bfd_put_16 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 919       }
 920       break;
 921
 922     case 3:
 923       /* Do nothing */
 924       break;
 925
 926     case 4:
 927 #ifdef BFD64
 928       {
 929         bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets);
 930         DOIT (x);
 931         bfd_put_64 (abfd, x, (bfd_byte *) data + octets);
 932       }
 933 #else
 934       abort ();
 935 #endif
 936       break;
 937     default:
 938       return bfd_reloc_other;
 939     }
 940
 941   return flag;
 942 }
 943
 944 /*
 945 FUNCTION
 946         bfd_install_relocation
 947
 948 SYNOPSIS
 949         bfd_reloc_status_type bfd_install_relocation
 950           (bfd *abfd,
 951            arelent *reloc_entry,
 952            void *data, bfd_vma data_start,
 953            asection *input_section,
 954            char **error_message);
 955
 956 DESCRIPTION
 957         This looks remarkably like <<bfd_perform_relocation>>, except it
 958         does not expect that the section contents have been filled in.
 959         I.e., it's suitable for use when creating, rather than applying
 960         a relocation.
 961
 962         For now, this function should be considered reserved for the
 963         assembler.
 964 */
 965
 966 bfd_reloc_status_type
 967 bfd_install_relocation (bfd *abfd,
 968                         arelent *reloc_entry,
 969                         void *data_start,
 970                         bfd_vma data_start_offset,
 971                         asection *input_section,
 972                         char **error_message)
 973 {
 974   bfd_vma relocation;
 975   bfd_reloc_status_type flag = bfd_reloc_ok;
 976   bfd_size_type octets;
 977   bfd_vma output_base = 0;
 978   reloc_howto_type *howto = reloc_entry->howto;
 979   asection *reloc_target_output_section;
 980   asymbol *symbol;
 981   bfd_byte *data;
 982
 983   symbol = *(reloc_entry->sym_ptr_ptr);
 984   if (bfd_is_abs_section (symbol->section))
 985     {
 986       reloc_entry->address += input_section->output_offset;
 987       return bfd_reloc_ok;
 988     }
 989
 990   /* If there is a function supplied to handle this relocation type,
 991      call it.  It'll return `bfd_reloc_continue' if further processing
 992      can be done.  */
 993   if (howto->special_function)
 994     {
 995       bfd_reloc_status_type cont;
 996
 997       /* XXX - The special_function calls haven't been fixed up to deal
 998          with creating new relocations and section contents.  */
 999       cont = howto->special_function (abfd, reloc_entry, symbol,
1000                                       /* XXX - Non-portable! */
1001                                       ((bfd_byte *) data_start
1002                                        - data_start_offset),
1003                                       input_section, abfd, error_message);
1004       if (cont != bfd_reloc_continue)
1005         return cont;
1006     }
1007
1008   /* Is the address of the relocation really within the section?  */
1009   octets = reloc_entry->address * bfd_octets_per_byte (abfd);
1010   if (octets + bfd_get_reloc_size (howto)
1011       > bfd_get_section_limit_octets (abfd, input_section))
1012     return bfd_reloc_outofrange;
1013
1014   /* Work out which section the relocation is targeted at and the
1015      initial relocation command value.  */
1016
1017   /* Get symbol value.  (Common symbols are special.)  */
1018   if (bfd_is_com_section (symbol->section))
1019     relocation = 0;
1020   else
1021     relocation = symbol->value;
1022
1023   reloc_target_output_section = symbol->section->output_section;
1024
1025   /* Convert input-section-relative symbol value to absolute.  */
1026   if (! howto->partial_inplace)
1027     output_base = 0;
1028   else
1029     output_base = reloc_target_output_section->vma;
1030
1031   relocation += output_base + symbol->section->output_offset;
1032
1033   /* Add in supplied addend.  */
1034   relocation += reloc_entry->addend;
1035
1036   /* Here the variable relocation holds the final address of the
1037      symbol we are relocating against, plus any addend.  */
1038
1039   if (howto->pc_relative)
1040     {
1041       /* This is a PC relative relocation.  We want to set RELOCATION
1042          to the distance between the address of the symbol and the
1043          location.  RELOCATION is already the address of the symbol.
1044
1045          We start by subtracting the address of the section containing
1046          the location.
1047
1048          If pcrel_offset is set, we must further subtract the position
1049          of the location within the section.  Some targets arrange for
1050          the addend to be the negative of the position of the location
1051          within the section; for example, i386-aout does this.  For
1052          i386-aout, pcrel_offset is FALSE.  Some other targets do not
1053          include the position of the location; for example, m88kbcs,
1054          or ELF.  For those targets, pcrel_offset is TRUE.
1055
1056          If we are producing relocatable output, then we must ensure
1057          that this reloc will be correctly computed when the final
1058          relocation is done.  If pcrel_offset is FALSE we want to wind
1059          up with the negative of the location within the section,
1060          which means we must adjust the existing addend by the change
1061          in the location within the section.  If pcrel_offset is TRUE
1062          we do not want to adjust the existing addend at all.
1063
1064          FIXME: This seems logical to me, but for the case of
1065          producing relocatable output it is not what the code
1066          actually does.  I don't want to change it, because it seems
1067          far too likely that something will break.  */
1068
1069       relocation -=
1070         input_section->output_section->vma + input_section->output_offset;
1071
1072       if (howto->pcrel_offset && howto->partial_inplace)
1073         relocation -= reloc_entry->address;
1074     }
1075
1076   if (! howto->partial_inplace)
1077     {
1078       /* This is a partial relocation, and we want to apply the relocation
1079          to the reloc entry rather than the raw data. Modify the reloc
1080          inplace to reflect what we now know.  */
1081       reloc_entry->addend = relocation;
1082       reloc_entry->address += input_section->output_offset;
1083       return flag;
1084     }
1085   else
1086     {
1087       /* This is a partial relocation, but inplace, so modify the
1088          reloc record a bit.
1089
1090          If we've relocated with a symbol with a section, change
1091          into a ref to the section belonging to the symbol.  */
1092       reloc_entry->address += input_section->output_offset;
1093
1094       /* WTF?? */
1095       if (abfd->xvec->flavour == bfd_target_coff_flavour
1096           && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1097           && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1098         {
1099
1100           /* For m68k-coff, the addend was being subtracted twice during
1101              relocation with -r.  Removing the line below this comment
1102              fixes that problem; see PR 2953.
1103
1104 However, Ian wrote the following, regarding removing the line below,
1105 which explains why it is still enabled:  --djm
1106
1107 If you put a patch like that into BFD you need to check all the COFF
1108 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
1109 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1110 problem in a different way.  There may very well be a reason that the
1111 code works as it does.
1112
1113 Hmmm.  The first obvious point is that bfd_install_relocation should
1114 not have any tests that depend upon the flavour.  It's seem like
1115 entirely the wrong place for such a thing.  The second obvious point
1116 is that the current code ignores the reloc addend when producing
1117 relocatable output for COFF.  That's peculiar.  In fact, I really
1118 have no idea what the point of the line you want to remove is.
1119
1120 A typical COFF reloc subtracts the old value of the symbol and adds in
1121 the new value to the location in the object file (if it's a pc
1122 relative reloc it adds the difference between the symbol value and the
1123 location).  When relocating we need to preserve that property.
1124
1125 BFD handles this by setting the addend to the negative of the old
1126 value of the symbol.  Unfortunately it handles common symbols in a
1127 non-standard way (it doesn't subtract the old value) but that's a
1128 different story (we can't change it without losing backward
1129 compatibility with old object files) (coff-i386 does subtract the old
1130 value, to be compatible with existing coff-i386 targets, like SCO).
1131
1132 So everything works fine when not producing relocatable output.  When
1133 we are producing relocatable output, logically we should do exactly
1134 what we do when not producing relocatable output.  Therefore, your
1135 patch is correct.  In fact, it should probably always just set
1136 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1137 add the value into the object file.  This won't hurt the COFF code,
1138 which doesn't use the addend; I'm not sure what it will do to other
1139 formats (the thing to check for would be whether any formats both use
1140 the addend and set partial_inplace).
1141
1142 When I wanted to make coff-i386 produce relocatable output, I ran
1143 into the problem that you are running into: I wanted to remove that
1144 line.  Rather than risk it, I made the coff-i386 relocs use a special
1145 function; it's coff_i386_reloc in coff-i386.c.  The function
1146 specifically adds the addend field into the object file, knowing that
1147 bfd_install_relocation is not going to.  If you remove that line, then
1148 coff-i386.c will wind up adding the addend field in twice.  It's
1149 trivial to fix; it just needs to be done.
1150
1151 The problem with removing the line is just that it may break some
1152 working code.  With BFD it's hard to be sure of anything.  The right
1153 way to deal with this is simply to build and test at least all the
1154 supported COFF targets.  It should be straightforward if time and disk
1155 space consuming.  For each target:
1156     1) build the linker
1157     2) generate some executable, and link it using -r (I would
1158        probably use paranoia.o and link against newlib/libc.a, which
1159        for all the supported targets would be available in
1160        /usr/cygnus/progressive/H-host/target/lib/libc.a).
1161     3) make the change to reloc.c
1162     4) rebuild the linker
1163     5) repeat step 2
1164     6) if the resulting object files are the same, you have at least
1165        made it no worse
1166     7) if they are different you have to figure out which version is
1167        right.  */
1168           relocation -= reloc_entry->addend;
1169           /* FIXME: There should be no target specific code here...  */
1170           if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1171             reloc_entry->addend = 0;
1172         }
1173       else
1174         {
1175           reloc_entry->addend = relocation;
1176         }
1177     }
1178
1179   /* FIXME: This overflow checking is incomplete, because the value
1180      might have overflowed before we get here.  For a correct check we
1181      need to compute the value in a size larger than bitsize, but we
1182      can't reasonably do that for a reloc the same size as a host
1183      machine word.
1184      FIXME: We should also do overflow checking on the result after
1185      adding in the value contained in the object file.  */
1186   if (howto->complain_on_overflow != complain_overflow_dont)
1187     flag = bfd_check_overflow (howto->complain_on_overflow,
1188                                howto->bitsize,
1189                                howto->rightshift,
1190                                bfd_arch_bits_per_address (abfd),
1191                                relocation);
1192
1193   /* Either we are relocating all the way, or we don't want to apply
1194      the relocation to the reloc entry (probably because there isn't
1195      any room in the output format to describe addends to relocs).  */
1196
1197   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1198      (OSF version 1.3, compiler version 3.11).  It miscompiles the
1199      following program:
1200
1201      struct str
1202      {
1203        unsigned int i0;
1204      } s = { 0 };
1205
1206      int
1207      main ()
1208      {
1209        unsigned long x;
1210
1211        x = 0x100000000;
1212        x <<= (unsigned long) s.i0;
1213        if (x == 0)
1214          printf ("failed\n");
1215        else
1216          printf ("succeeded (%lx)\n", x);
1217      }
1218      */
1219
1220   relocation >>= (bfd_vma) howto->rightshift;
1221
1222   /* Shift everything up to where it's going to be used.  */
1223   relocation <<= (bfd_vma) howto->bitpos;
1224
1225   /* Wait for the day when all have the mask in them.  */
1226
1227   /* What we do:
1228      i instruction to be left alone
1229      o offset within instruction
1230      r relocation offset to apply
1231      S src mask
1232      D dst mask
1233      N ~dst mask
1234      A part 1
1235      B part 2
1236      R result
1237
1238      Do this:
1239      ((  i i i i i o o o o o  from bfd_get<size>
1240      and           S S S S S) to get the size offset we want
1241      +   r r r r r r r r r r) to get the final value to place
1242      and           D D D D D  to chop to right size
1243      -----------------------
1244      =             A A A A A
1245      And this:
1246      (   i i i i i o o o o o  from bfd_get<size>
1247      and N N N N N          ) get instruction
1248      -----------------------
1249      =   B B B B B
1250
1251      And then:
1252      (   B B B B B
1253      or            A A A A A)
1254      -----------------------
1255      =   R R R R R R R R R R  put into bfd_put<size>
1256      */
1257
1258 #define DOIT(x) \
1259   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
1260
1261   data = (bfd_byte *) data_start + (octets - data_start_offset);
1262
1263   switch (howto->size)
1264     {
1265     case 0:
1266       {
1267         char x = bfd_get_8 (abfd, data);
1268         DOIT (x);
1269         bfd_put_8 (abfd, x, data);
1270       }
1271       break;
1272
1273     case 1:
1274       {
1275         short x = bfd_get_16 (abfd, data);
1276         DOIT (x);
1277         bfd_put_16 (abfd, (bfd_vma) x, data);
1278       }
1279       break;
1280     case 2:
1281       {
1282         long x = bfd_get_32 (abfd, data);
1283         DOIT (x);
1284         bfd_put_32 (abfd, (bfd_vma) x, data);
1285       }
1286       break;
1287     case -2:
1288       {
1289         long x = bfd_get_32 (abfd, data);
1290         relocation = -relocation;
1291         DOIT (x);
1292         bfd_put_32 (abfd, (bfd_vma) x, data);
1293       }
1294       break;
1295
1296     case 3:
1297       /* Do nothing */
1298       break;
1299
1300     case 4:
1301       {
1302         bfd_vma x = bfd_get_64 (abfd, data);
1303         DOIT (x);
1304         bfd_put_64 (abfd, x, data);
1305       }
1306       break;
1307     default:
1308       return bfd_reloc_other;
1309     }
1310
1311   return flag;
1312 }
1313
1314 /* This relocation routine is used by some of the backend linkers.
1315    They do not construct asymbol or arelent structures, so there is no
1316    reason for them to use bfd_perform_relocation.  Also,
1317    bfd_perform_relocation is so hacked up it is easier to write a new
1318    function than to try to deal with it.
1319
1320    This routine does a final relocation.  Whether it is useful for a
1321    relocatable link depends upon how the object format defines
1322    relocations.
1323
1324    FIXME: This routine ignores any special_function in the HOWTO,
1325    since the existing special_function values have been written for
1326    bfd_perform_relocation.
1327
1328    HOWTO is the reloc howto information.
1329    INPUT_BFD is the BFD which the reloc applies to.
1330    INPUT_SECTION is the section which the reloc applies to.
1331    CONTENTS is the contents of the section.
1332    ADDRESS is the address of the reloc within INPUT_SECTION.
1333    VALUE is the value of the symbol the reloc refers to.
1334    ADDEND is the addend of the reloc.  */
1335
1336 bfd_reloc_status_type
1337 _bfd_final_link_relocate (reloc_howto_type *howto,
1338                           bfd *input_bfd,
1339                           asection *input_section,
1340                           bfd_byte *contents,
1341                           bfd_vma address,
1342                           bfd_vma value,
1343                           bfd_vma addend)
1344 {
1345   bfd_vma relocation;
1346   bfd_size_type octets = address * bfd_octets_per_byte (input_bfd);
1347
1348   /* Sanity check the address.  */
1349   if (octets + bfd_get_reloc_size (howto)
1350       > bfd_get_section_limit_octets (input_bfd, input_section))
1351     return bfd_reloc_outofrange;
1352
1353   /* This function assumes that we are dealing with a basic relocation
1354      against a symbol.  We want to compute the value of the symbol to
1355      relocate to.  This is just VALUE, the value of the symbol, plus
1356      ADDEND, any addend associated with the reloc.  */
1357   relocation = value + addend;
1358
1359   /* If the relocation is PC relative, we want to set RELOCATION to
1360      the distance between the symbol (currently in RELOCATION) and the
1361      location we are relocating.  Some targets (e.g., i386-aout)
1362      arrange for the contents of the section to be the negative of the
1363      offset of the location within the section; for such targets
1364      pcrel_offset is FALSE.  Other targets (e.g., m88kbcs or ELF)
1365      simply leave the contents of the section as zero; for such
1366      targets pcrel_offset is TRUE.  If pcrel_offset is FALSE we do not
1367      need to subtract out the offset of the location within the
1368      section (which is just ADDRESS).  */
1369   if (howto->pc_relative)
1370     {
1371       relocation -= (input_section->output_section->vma
1372                      + input_section->output_offset);
1373       if (howto->pcrel_offset)
1374         relocation -= address;
1375     }
1376
1377   return _bfd_relocate_contents (howto, input_bfd, relocation,
1378                                  contents + address);
1379 }
1380
1381 /* Relocate a given location using a given value and howto.  */
1382
1383 bfd_reloc_status_type
1384 _bfd_relocate_contents (reloc_howto_type *howto,
1385                         bfd *input_bfd,
1386                         bfd_vma relocation,
1387                         bfd_byte *location)
1388 {
1389   int size;
1390   bfd_vma x = 0;
1391   bfd_reloc_status_type flag;
1392   unsigned int rightshift = howto->rightshift;
1393   unsigned int bitpos = howto->bitpos;
1394
1395   /* If the size is negative, negate RELOCATION.  This isn't very
1396      general.  */
1397   if (howto->size < 0)
1398     relocation = -relocation;
1399
1400   /* Get the value we are going to relocate.  */
1401   size = bfd_get_reloc_size (howto);
1402   switch (size)
1403     {
1404     default:
1405       abort ();
1406     case 0:
1407       return bfd_reloc_ok;
1408     case 1:
1409       x = bfd_get_8 (input_bfd, location);
1410       break;
1411     case 2:
1412       x = bfd_get_16 (input_bfd, location);
1413       break;
1414     case 4:
1415       x = bfd_get_32 (input_bfd, location);
1416       break;
1417     case 8:
1418 #ifdef BFD64
1419       x = bfd_get_64 (input_bfd, location);
1420 #else
1421       abort ();
1422 #endif
1423       break;
1424     }
1425
1426   /* Check for overflow.  FIXME: We may drop bits during the addition
1427      which we don't check for.  We must either check at every single
1428      operation, which would be tedious, or we must do the computations
1429      in a type larger than bfd_vma, which would be inefficient.  */
1430   flag = bfd_reloc_ok;
1431   if (howto->complain_on_overflow != complain_overflow_dont)
1432     {
1433       bfd_vma addrmask, fieldmask, signmask, ss;
1434       bfd_vma a, b, sum;
1435
1436       /* Get the values to be added together.  For signed and unsigned
1437          relocations, we assume that all values should be truncated to
1438          the size of an address.  For bitfields, all the bits matter.
1439          See also bfd_check_overflow.  */
1440       fieldmask = N_ONES (howto->bitsize);
1441       signmask = ~fieldmask;
1442       addrmask = (N_ONES (bfd_arch_bits_per_address (input_bfd))
1443                   | (fieldmask << rightshift));
1444       a = (relocation & addrmask) >> rightshift;
1445       b = (x & howto->src_mask & addrmask) >> bitpos;
1446       addrmask >>= rightshift;
1447
1448       switch (howto->complain_on_overflow)
1449         {
1450         case complain_overflow_signed:
1451           /* If any sign bits are set, all sign bits must be set.
1452              That is, A must be a valid negative address after
1453              shifting.  */
1454           signmask = ~(fieldmask >> 1);
1455           /* Fall thru */
1456
1457         case complain_overflow_bitfield:
1458           /* Much like the signed check, but for a field one bit
1459              wider.  We allow a bitfield to represent numbers in the
1460              range -2**n to 2**n-1, where n is the number of bits in the
1461              field.  Note that when bfd_vma is 32 bits, a 32-bit reloc
1462              can't overflow, which is exactly what we want.  */
1463           ss = a & signmask;
1464           if (ss != 0 && ss != (addrmask & signmask))
1465             flag = bfd_reloc_overflow;
1466
1467           /* We only need this next bit of code if the sign bit of B
1468              is below the sign bit of A.  This would only happen if
1469              SRC_MASK had fewer bits than BITSIZE.  Note that if
1470              SRC_MASK has more bits than BITSIZE, we can get into
1471              trouble; we would need to verify that B is in range, as
1472              we do for A above.  */
1473           ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1474           ss >>= bitpos;
1475
1476           /* Set all the bits above the sign bit.  */
1477           b = (b ^ ss) - ss;
1478
1479           /* Now we can do the addition.  */
1480           sum = a + b;
1481
1482           /* See if the result has the correct sign.  Bits above the
1483              sign bit are junk now; ignore them.  If the sum is
1484              positive, make sure we did not have all negative inputs;
1485              if the sum is negative, make sure we did not have all
1486              positive inputs.  The test below looks only at the sign
1487              bits, and it really just
1488                  SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1489
1490              We mask with addrmask here to explicitly allow an address
1491              wrap-around.  The Linux kernel relies on it, and it is
1492              the only way to write assembler code which can run when
1493              loaded at a location 0x80000000 away from the location at
1494              which it is linked.  */
1495           if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1496             flag = bfd_reloc_overflow;
1497           break;
1498
1499         case complain_overflow_unsigned:
1500           /* Checking for an unsigned overflow is relatively easy:
1501              trim the addresses and add, and trim the result as well.
1502              Overflow is normally indicated when the result does not
1503              fit in the field.  However, we also need to consider the
1504              case when, e.g., fieldmask is 0x7fffffff or smaller, an
1505              input is 0x80000000, and bfd_vma is only 32 bits; then we
1506              will get sum == 0, but there is an overflow, since the
1507              inputs did not fit in the field.  Instead of doing a
1508              separate test, we can check for this by or-ing in the
1509              operands when testing for the sum overflowing its final
1510              field.  */
1511           sum = (a + b) & addrmask;
1512           if ((a | b | sum) & signmask)
1513             flag = bfd_reloc_overflow;
1514           break;
1515
1516         default:
1517           abort ();
1518         }
1519     }
1520
1521   /* Put RELOCATION in the right bits.  */
1522   relocation >>= (bfd_vma) rightshift;
1523   relocation <<= (bfd_vma) bitpos;
1524
1525   /* Add RELOCATION to the right bits of X.  */
1526   x = ((x & ~howto->dst_mask)
1527        | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1528
1529   /* Put the relocated value back in the object file.  */
1530   switch (size)
1531     {
1532     default:
1533       abort ();
1534     case 1:
1535       bfd_put_8 (input_bfd, x, location);
1536       break;
1537     case 2:
1538       bfd_put_16 (input_bfd, x, location);
1539       break;
1540     case 4:
1541       bfd_put_32 (input_bfd, x, location);
1542       break;
1543     case 8:
1544 #ifdef BFD64
1545       bfd_put_64 (input_bfd, x, location);
1546 #else
1547       abort ();
1548 #endif
1549       break;
1550     }
1551
1552   return flag;
1553 }
1554
1555 /* Clear a given location using a given howto, by applying a fixed relocation
1556    value and discarding any in-place addend.  This is used for fixed-up
1557    relocations against discarded symbols, to make ignorable debug or unwind
1558    information more obvious.  */
1559
1560 void
1561 _bfd_clear_contents (reloc_howto_type *howto,
1562                      bfd *input_bfd,
1563                      asection *input_section,
1564                      bfd_byte *location)
1565 {
1566   int size;
1567   bfd_vma x = 0;
1568
1569   /* Get the value we are going to relocate.  */
1570   size = bfd_get_reloc_size (howto);
1571   switch (size)
1572     {
1573     default:
1574       abort ();
1575     case 0:
1576       return;
1577     case 1:
1578       x = bfd_get_8 (input_bfd, location);
1579       break;
1580     case 2:
1581       x = bfd_get_16 (input_bfd, location);
1582       break;
1583     case 4:
1584       x = bfd_get_32 (input_bfd, location);
1585       break;
1586     case 8:
1587 #ifdef BFD64
1588       x = bfd_get_64 (input_bfd, location);
1589 #else
1590       abort ();
1591 #endif
1592       break;
1593     }
1594
1595   /* Zero out the unwanted bits of X.  */
1596   x &= ~howto->dst_mask;
1597
1598   /* For a range list, use 1 instead of 0 as placeholder.  0
1599      would terminate the list, hiding any later entries.  */
1600   if (strcmp (bfd_get_section_name (input_bfd, input_section),
1601               ".debug_ranges") == 0
1602       && (howto->dst_mask & 1) != 0)
1603     x |= 1;
1604
1605   /* Put the relocated value back in the object file.  */
1606   switch (size)
1607     {
1608     default:
1609     case 0:
1610       abort ();
1611     case 1:
1612       bfd_put_8 (input_bfd, x, location);
1613       break;
1614     case 2:
1615       bfd_put_16 (input_bfd, x, location);
1616       break;
1617     case 4:
1618       bfd_put_32 (input_bfd, x, location);
1619       break;
1620     case 8:
1621 #ifdef BFD64
1622       bfd_put_64 (input_bfd, x, location);
1623 #else
1624       abort ();
1625 #endif
1626       break;
1627     }
1628 }
1629
1630 /*
1631 DOCDD
1632 INODE
1633         howto manager,  , typedef arelent, Relocations
1634
1635 SUBSECTION
1636         The howto manager
1637
1638         When an application wants to create a relocation, but doesn't
1639         know what the target machine might call it, it can find out by
1640         using this bit of code.
1641
1642 */
1643
1644 /*
1645 TYPEDEF
1646         bfd_reloc_code_type
1647
1648 DESCRIPTION
1649         The insides of a reloc code.  The idea is that, eventually, there
1650         will be one enumerator for every type of relocation we ever do.
1651         Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1652         return a howto pointer.
1653
1654         This does mean that the application must determine the correct
1655         enumerator value; you can't get a howto pointer from a random set
1656         of attributes.
1657
1658 SENUM
1659    bfd_reloc_code_real
1660
1661 ENUM
1662   BFD_RELOC_64
1663 ENUMX
1664   BFD_RELOC_32
1665 ENUMX
1666   BFD_RELOC_26
1667 ENUMX
1668   BFD_RELOC_24
1669 ENUMX
1670   BFD_RELOC_16
1671 ENUMX
1672   BFD_RELOC_14
1673 ENUMX
1674   BFD_RELOC_8
1675 ENUMDOC
1676   Basic absolute relocations of N bits.
1677
1678 ENUM
1679   BFD_RELOC_64_PCREL
1680 ENUMX
1681   BFD_RELOC_32_PCREL
1682 ENUMX
1683   BFD_RELOC_24_PCREL
1684 ENUMX
1685   BFD_RELOC_16_PCREL
1686 ENUMX
1687   BFD_RELOC_12_PCREL
1688 ENUMX
1689   BFD_RELOC_8_PCREL
1690 ENUMDOC
1691   PC-relative relocations.  Sometimes these are relative to the address
1692 of the relocation itself; sometimes they are relative to the start of
1693 the section containing the relocation.  It depends on the specific target.
1694
1695 The 24-bit relocation is used in some Intel 960 configurations.
1696
1697 ENUM
1698   BFD_RELOC_32_SECREL
1699 ENUMDOC
1700   Section relative relocations.  Some targets need this for DWARF2.
1701
1702 ENUM
1703   BFD_RELOC_32_GOT_PCREL
1704 ENUMX
1705   BFD_RELOC_16_GOT_PCREL
1706 ENUMX
1707   BFD_RELOC_8_GOT_PCREL
1708 ENUMX
1709   BFD_RELOC_32_GOTOFF
1710 ENUMX
1711   BFD_RELOC_16_GOTOFF
1712 ENUMX
1713   BFD_RELOC_LO16_GOTOFF
1714 ENUMX
1715   BFD_RELOC_HI16_GOTOFF
1716 ENUMX
1717   BFD_RELOC_HI16_S_GOTOFF
1718 ENUMX
1719   BFD_RELOC_8_GOTOFF
1720 ENUMX
1721   BFD_RELOC_64_PLT_PCREL
1722 ENUMX
1723   BFD_RELOC_32_PLT_PCREL
1724 ENUMX
1725   BFD_RELOC_24_PLT_PCREL
1726 ENUMX
1727   BFD_RELOC_16_PLT_PCREL
1728 ENUMX
1729   BFD_RELOC_8_PLT_PCREL
1730 ENUMX
1731   BFD_RELOC_64_PLTOFF
1732 ENUMX
1733   BFD_RELOC_32_PLTOFF
1734 ENUMX
1735   BFD_RELOC_16_PLTOFF
1736 ENUMX
1737   BFD_RELOC_LO16_PLTOFF
1738 ENUMX
1739   BFD_RELOC_HI16_PLTOFF
1740 ENUMX
1741   BFD_RELOC_HI16_S_PLTOFF
1742 ENUMX
1743   BFD_RELOC_8_PLTOFF
1744 ENUMDOC
1745   For ELF.
1746
1747 ENUM
1748   BFD_RELOC_SIZE32
1749 ENUMX
1750   BFD_RELOC_SIZE64
1751 ENUMDOC
1752   Size relocations.
1753
1754 ENUM
1755   BFD_RELOC_68K_GLOB_DAT
1756 ENUMX
1757   BFD_RELOC_68K_JMP_SLOT
1758 ENUMX
1759   BFD_RELOC_68K_RELATIVE
1760 ENUMX
1761   BFD_RELOC_68K_TLS_GD32
1762 ENUMX
1763   BFD_RELOC_68K_TLS_GD16
1764 ENUMX
1765   BFD_RELOC_68K_TLS_GD8
1766 ENUMX
1767   BFD_RELOC_68K_TLS_LDM32
1768 ENUMX
1769   BFD_RELOC_68K_TLS_LDM16
1770 ENUMX
1771   BFD_RELOC_68K_TLS_LDM8
1772 ENUMX
1773   BFD_RELOC_68K_TLS_LDO32
1774 ENUMX
1775   BFD_RELOC_68K_TLS_LDO16
1776 ENUMX
1777   BFD_RELOC_68K_TLS_LDO8
1778 ENUMX
1779   BFD_RELOC_68K_TLS_IE32
1780 ENUMX
1781   BFD_RELOC_68K_TLS_IE16
1782 ENUMX
1783   BFD_RELOC_68K_TLS_IE8
1784 ENUMX
1785   BFD_RELOC_68K_TLS_LE32
1786 ENUMX
1787   BFD_RELOC_68K_TLS_LE16
1788 ENUMX
1789   BFD_RELOC_68K_TLS_LE8
1790 ENUMDOC
1791   Relocations used by 68K ELF.
1792
1793 ENUM
1794   BFD_RELOC_32_BASEREL
1795 ENUMX
1796   BFD_RELOC_16_BASEREL
1797 ENUMX
1798   BFD_RELOC_LO16_BASEREL
1799 ENUMX
1800   BFD_RELOC_HI16_BASEREL
1801 ENUMX
1802   BFD_RELOC_HI16_S_BASEREL
1803 ENUMX
1804   BFD_RELOC_8_BASEREL
1805 ENUMX
1806   BFD_RELOC_RVA
1807 ENUMDOC
1808   Linkage-table relative.
1809
1810 ENUM
1811   BFD_RELOC_8_FFnn
1812 ENUMDOC
1813   Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1814
1815 ENUM
1816   BFD_RELOC_32_PCREL_S2
1817 ENUMX
1818   BFD_RELOC_16_PCREL_S2
1819 ENUMX
1820   BFD_RELOC_23_PCREL_S2
1821 ENUMDOC
1822   These PC-relative relocations are stored as word displacements --
1823 i.e., byte displacements shifted right two bits.  The 30-bit word
1824 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1825 SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
1826 signed 16-bit displacement is used on the MIPS, and the 23-bit
1827 displacement is used on the Alpha.
1828
1829 ENUM
1830   BFD_RELOC_HI22
1831 ENUMX
1832   BFD_RELOC_LO10
1833 ENUMDOC
1834   High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1835 the target word.  These are used on the SPARC.
1836
1837 ENUM
1838   BFD_RELOC_GPREL16
1839 ENUMX
1840   BFD_RELOC_GPREL32
1841 ENUMDOC
1842   For systems that allocate a Global Pointer register, these are
1843 displacements off that register.  These relocation types are
1844 handled specially, because the value the register will have is
1845 decided relatively late.
1846
1847 ENUM
1848   BFD_RELOC_I960_CALLJ
1849 ENUMDOC
1850   Reloc types used for i960/b.out.
1851
1852 ENUM
1853   BFD_RELOC_NONE
1854 ENUMX
1855   BFD_RELOC_SPARC_WDISP22
1856 ENUMX
1857   BFD_RELOC_SPARC22
1858 ENUMX
1859   BFD_RELOC_SPARC13
1860 ENUMX
1861   BFD_RELOC_SPARC_GOT10
1862 ENUMX
1863   BFD_RELOC_SPARC_GOT13
1864 ENUMX
1865   BFD_RELOC_SPARC_GOT22
1866 ENUMX
1867   BFD_RELOC_SPARC_PC10
1868 ENUMX
1869   BFD_RELOC_SPARC_PC22
1870 ENUMX
1871   BFD_RELOC_SPARC_WPLT30
1872 ENUMX
1873   BFD_RELOC_SPARC_COPY
1874 ENUMX
1875   BFD_RELOC_SPARC_GLOB_DAT
1876 ENUMX
1877   BFD_RELOC_SPARC_JMP_SLOT
1878 ENUMX
1879   BFD_RELOC_SPARC_RELATIVE
1880 ENUMX
1881   BFD_RELOC_SPARC_UA16
1882 ENUMX
1883   BFD_RELOC_SPARC_UA32
1884 ENUMX
1885   BFD_RELOC_SPARC_UA64
1886 ENUMX
1887   BFD_RELOC_SPARC_GOTDATA_HIX22
1888 ENUMX
1889   BFD_RELOC_SPARC_GOTDATA_LOX10
1890 ENUMX
1891   BFD_RELOC_SPARC_GOTDATA_OP_HIX22
1892 ENUMX
1893   BFD_RELOC_SPARC_GOTDATA_OP_LOX10
1894 ENUMX
1895   BFD_RELOC_SPARC_GOTDATA_OP
1896 ENUMX
1897   BFD_RELOC_SPARC_JMP_IREL
1898 ENUMX
1899   BFD_RELOC_SPARC_IRELATIVE
1900 ENUMDOC
1901   SPARC ELF relocations.  There is probably some overlap with other
1902   relocation types already defined.
1903
1904 ENUM
1905   BFD_RELOC_SPARC_BASE13
1906 ENUMX
1907   BFD_RELOC_SPARC_BASE22
1908 ENUMDOC
1909   I think these are specific to SPARC a.out (e.g., Sun 4).
1910
1911 ENUMEQ
1912   BFD_RELOC_SPARC_64
1913   BFD_RELOC_64
1914 ENUMX
1915   BFD_RELOC_SPARC_10
1916 ENUMX
1917   BFD_RELOC_SPARC_11
1918 ENUMX
1919   BFD_RELOC_SPARC_OLO10
1920 ENUMX
1921   BFD_RELOC_SPARC_HH22
1922 ENUMX
1923   BFD_RELOC_SPARC_HM10
1924 ENUMX
1925   BFD_RELOC_SPARC_LM22
1926 ENUMX
1927   BFD_RELOC_SPARC_PC_HH22
1928 ENUMX
1929   BFD_RELOC_SPARC_PC_HM10
1930 ENUMX
1931   BFD_RELOC_SPARC_PC_LM22
1932 ENUMX
1933   BFD_RELOC_SPARC_WDISP16
1934 ENUMX
1935   BFD_RELOC_SPARC_WDISP19
1936 ENUMX
1937   BFD_RELOC_SPARC_7
1938 ENUMX
1939   BFD_RELOC_SPARC_6
1940 ENUMX
1941   BFD_RELOC_SPARC_5
1942 ENUMEQX
1943   BFD_RELOC_SPARC_DISP64
1944   BFD_RELOC_64_PCREL
1945 ENUMX
1946   BFD_RELOC_SPARC_PLT32
1947 ENUMX
1948   BFD_RELOC_SPARC_PLT64
1949 ENUMX
1950   BFD_RELOC_SPARC_HIX22
1951 ENUMX
1952   BFD_RELOC_SPARC_LOX10
1953 ENUMX
1954   BFD_RELOC_SPARC_H44
1955 ENUMX
1956   BFD_RELOC_SPARC_M44
1957 ENUMX
1958   BFD_RELOC_SPARC_L44
1959 ENUMX
1960   BFD_RELOC_SPARC_REGISTER
1961 ENUMX
1962   BFD_RELOC_SPARC_H34
1963 ENUMX
1964   BFD_RELOC_SPARC_SIZE32
1965 ENUMX
1966   BFD_RELOC_SPARC_SIZE64
1967 ENUMX
1968   BFD_RELOC_SPARC_WDISP10
1969 ENUMDOC
1970   SPARC64 relocations
1971
1972 ENUM
1973   BFD_RELOC_SPARC_REV32
1974 ENUMDOC
1975   SPARC little endian relocation
1976 ENUM
1977   BFD_RELOC_SPARC_TLS_GD_HI22
1978 ENUMX
1979   BFD_RELOC_SPARC_TLS_GD_LO10
1980 ENUMX
1981   BFD_RELOC_SPARC_TLS_GD_ADD
1982 ENUMX
1983   BFD_RELOC_SPARC_TLS_GD_CALL
1984 ENUMX
1985   BFD_RELOC_SPARC_TLS_LDM_HI22
1986 ENUMX
1987   BFD_RELOC_SPARC_TLS_LDM_LO10
1988 ENUMX
1989   BFD_RELOC_SPARC_TLS_LDM_ADD
1990 ENUMX
1991   BFD_RELOC_SPARC_TLS_LDM_CALL
1992 ENUMX
1993   BFD_RELOC_SPARC_TLS_LDO_HIX22
1994 ENUMX
1995   BFD_RELOC_SPARC_TLS_LDO_LOX10
1996 ENUMX
1997   BFD_RELOC_SPARC_TLS_LDO_ADD
1998 ENUMX
1999   BFD_RELOC_SPARC_TLS_IE_HI22
2000 ENUMX
2001   BFD_RELOC_SPARC_TLS_IE_LO10
2002 ENUMX
2003   BFD_RELOC_SPARC_TLS_IE_LD
2004 ENUMX
2005   BFD_RELOC_SPARC_TLS_IE_LDX
2006 ENUMX
2007   BFD_RELOC_SPARC_TLS_IE_ADD
2008 ENUMX
2009   BFD_RELOC_SPARC_TLS_LE_HIX22
2010 ENUMX
2011   BFD_RELOC_SPARC_TLS_LE_LOX10
2012 ENUMX
2013   BFD_RELOC_SPARC_TLS_DTPMOD32
2014 ENUMX
2015   BFD_RELOC_SPARC_TLS_DTPMOD64
2016 ENUMX
2017   BFD_RELOC_SPARC_TLS_DTPOFF32
2018 ENUMX
2019   BFD_RELOC_SPARC_TLS_DTPOFF64
2020 ENUMX
2021   BFD_RELOC_SPARC_TLS_TPOFF32
2022 ENUMX
2023   BFD_RELOC_SPARC_TLS_TPOFF64
2024 ENUMDOC
2025   SPARC TLS relocations
2026
2027 ENUM
2028   BFD_RELOC_SPU_IMM7
2029 ENUMX
2030   BFD_RELOC_SPU_IMM8
2031 ENUMX
2032   BFD_RELOC_SPU_IMM10
2033 ENUMX
2034   BFD_RELOC_SPU_IMM10W
2035 ENUMX
2036   BFD_RELOC_SPU_IMM16
2037 ENUMX
2038   BFD_RELOC_SPU_IMM16W
2039 ENUMX
2040   BFD_RELOC_SPU_IMM18
2041 ENUMX
2042   BFD_RELOC_SPU_PCREL9a
2043 ENUMX
2044   BFD_RELOC_SPU_PCREL9b
2045 ENUMX
2046   BFD_RELOC_SPU_PCREL16
2047 ENUMX
2048   BFD_RELOC_SPU_LO16
2049 ENUMX
2050   BFD_RELOC_SPU_HI16
2051 ENUMX
2052   BFD_RELOC_SPU_PPU32
2053 ENUMX
2054   BFD_RELOC_SPU_PPU64
2055 ENUMX
2056   BFD_RELOC_SPU_ADD_PIC
2057 ENUMDOC
2058   SPU Relocations.
2059
2060 ENUM
2061   BFD_RELOC_ALPHA_GPDISP_HI16
2062 ENUMDOC
2063   Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
2064      "addend" in some special way.
2065   For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
2066      writing; when reading, it will be the absolute section symbol.  The
2067      addend is the displacement in bytes of the "lda" instruction from
2068      the "ldah" instruction (which is at the address of this reloc).
2069 ENUM
2070   BFD_RELOC_ALPHA_GPDISP_LO16
2071 ENUMDOC
2072   For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
2073      with GPDISP_HI16 relocs.  The addend is ignored when writing the
2074      relocations out, and is filled in with the file's GP value on
2075      reading, for convenience.
2076
2077 ENUM
2078   BFD_RELOC_ALPHA_GPDISP
2079 ENUMDOC
2080   The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
2081      relocation except that there is no accompanying GPDISP_LO16
2082      relocation.
2083
2084 ENUM
2085   BFD_RELOC_ALPHA_LITERAL
2086 ENUMX
2087   BFD_RELOC_ALPHA_ELF_LITERAL
2088 ENUMX
2089   BFD_RELOC_ALPHA_LITUSE
2090 ENUMDOC
2091   The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
2092      the assembler turns it into a LDQ instruction to load the address of
2093      the symbol, and then fills in a register in the real instruction.
2094
2095      The LITERAL reloc, at the LDQ instruction, refers to the .lita
2096      section symbol.  The addend is ignored when writing, but is filled
2097      in with the file's GP value on reading, for convenience, as with the
2098      GPDISP_LO16 reloc.
2099
2100      The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2101      It should refer to the symbol to be referenced, as with 16_GOTOFF,
2102      but it generates output not based on the position within the .got
2103      section, but relative to the GP value chosen for the file during the
2104      final link stage.
2105
2106      The LITUSE reloc, on the instruction using the loaded address, gives
2107      information to the linker that it might be able to use to optimize
2108      away some literal section references.  The symbol is ignored (read
2109      as the absolute section symbol), and the "addend" indicates the type
2110      of instruction using the register:
2111               1 - "memory" fmt insn
2112               2 - byte-manipulation (byte offset reg)
2113               3 - jsr (target of branch)
2114
2115 ENUM
2116   BFD_RELOC_ALPHA_HINT
2117 ENUMDOC
2118   The HINT relocation indicates a value that should be filled into the
2119      "hint" field of a jmp/jsr/ret instruction, for possible branch-
2120      prediction logic which may be provided on some processors.
2121
2122 ENUM
2123   BFD_RELOC_ALPHA_LINKAGE
2124 ENUMDOC
2125   The LINKAGE relocation outputs a linkage pair in the object file,
2126      which is filled by the linker.
2127
2128 ENUM
2129   BFD_RELOC_ALPHA_CODEADDR
2130 ENUMDOC
2131   The CODEADDR relocation outputs a STO_CA in the object file,
2132      which is filled by the linker.
2133
2134 ENUM
2135   BFD_RELOC_ALPHA_GPREL_HI16
2136 ENUMX
2137   BFD_RELOC_ALPHA_GPREL_LO16
2138 ENUMDOC
2139   The GPREL_HI/LO relocations together form a 32-bit offset from the
2140      GP register.
2141
2142 ENUM
2143   BFD_RELOC_ALPHA_BRSGP
2144 ENUMDOC
2145   Like BFD_RELOC_23_PCREL_S2, except that the source and target must
2146   share a common GP, and the target address is adjusted for
2147   STO_ALPHA_STD_GPLOAD.
2148
2149 ENUM
2150   BFD_RELOC_ALPHA_NOP
2151 ENUMDOC
2152   The NOP relocation outputs a NOP if the longword displacement
2153      between two procedure entry points is < 2^21.
2154
2155 ENUM
2156   BFD_RELOC_ALPHA_BSR
2157 ENUMDOC
2158   The BSR relocation outputs a BSR if the longword displacement
2159      between two procedure entry points is < 2^21.
2160
2161 ENUM
2162   BFD_RELOC_ALPHA_LDA
2163 ENUMDOC
2164   The LDA relocation outputs a LDA if the longword displacement
2165      between two procedure entry points is < 2^16.
2166
2167 ENUM
2168   BFD_RELOC_ALPHA_BOH
2169 ENUMDOC
2170   The BOH relocation outputs a BSR if the longword displacement
2171      between two procedure entry points is < 2^21, or else a hint.
2172
2173 ENUM
2174   BFD_RELOC_ALPHA_TLSGD
2175 ENUMX
2176   BFD_RELOC_ALPHA_TLSLDM
2177 ENUMX
2178   BFD_RELOC_ALPHA_DTPMOD64
2179 ENUMX
2180   BFD_RELOC_ALPHA_GOTDTPREL16
2181 ENUMX
2182   BFD_RELOC_ALPHA_DTPREL64
2183 ENUMX
2184   BFD_RELOC_ALPHA_DTPREL_HI16
2185 ENUMX
2186   BFD_RELOC_ALPHA_DTPREL_LO16
2187 ENUMX
2188   BFD_RELOC_ALPHA_DTPREL16
2189 ENUMX
2190   BFD_RELOC_ALPHA_GOTTPREL16
2191 ENUMX
2192   BFD_RELOC_ALPHA_TPREL64
2193 ENUMX
2194   BFD_RELOC_ALPHA_TPREL_HI16
2195 ENUMX
2196   BFD_RELOC_ALPHA_TPREL_LO16
2197 ENUMX
2198   BFD_RELOC_ALPHA_TPREL16
2199 ENUMDOC
2200   Alpha thread-local storage relocations.
2201
2202 ENUM
2203   BFD_RELOC_MIPS_JMP
2204 ENUMX
2205   BFD_RELOC_MICROMIPS_JMP
2206 ENUMDOC
2207   The MIPS jump instruction.
2208
2209 ENUM
2210   BFD_RELOC_MIPS16_JMP
2211 ENUMDOC
2212   The MIPS16 jump instruction.
2213
2214 ENUM
2215   BFD_RELOC_MIPS16_GPREL
2216 ENUMDOC
2217   MIPS16 GP relative reloc.
2218
2219 ENUM
2220   BFD_RELOC_HI16
2221 ENUMDOC
2222   High 16 bits of 32-bit value; simple reloc.
2223
2224 ENUM
2225   BFD_RELOC_HI16_S
2226 ENUMDOC
2227   High 16 bits of 32-bit value but the low 16 bits will be sign
2228      extended and added to form the final result.  If the low 16
2229      bits form a negative number, we need to add one to the high value
2230      to compensate for the borrow when the low bits are added.
2231
2232 ENUM
2233   BFD_RELOC_LO16
2234 ENUMDOC
2235   Low 16 bits.
2236
2237 ENUM
2238   BFD_RELOC_HI16_PCREL
2239 ENUMDOC
2240   High 16 bits of 32-bit pc-relative value
2241 ENUM
2242   BFD_RELOC_HI16_S_PCREL
2243 ENUMDOC
2244   High 16 bits of 32-bit pc-relative value, adjusted
2245 ENUM
2246   BFD_RELOC_LO16_PCREL
2247 ENUMDOC
2248   Low 16 bits of pc-relative value
2249
2250 ENUM
2251   BFD_RELOC_MIPS16_GOT16
2252 ENUMX
2253   BFD_RELOC_MIPS16_CALL16
2254 ENUMDOC
2255   Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
2256      16-bit immediate fields
2257 ENUM
2258   BFD_RELOC_MIPS16_HI16
2259 ENUMDOC
2260   MIPS16 high 16 bits of 32-bit value.
2261 ENUM
2262   BFD_RELOC_MIPS16_HI16_S
2263 ENUMDOC
2264   MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2265      extended and added to form the final result.  If the low 16
2266      bits form a negative number, we need to add one to the high value
2267      to compensate for the borrow when the low bits are added.
2268 ENUM
2269   BFD_RELOC_MIPS16_LO16
2270 ENUMDOC
2271   MIPS16 low 16 bits.
2272
2273 ENUM
2274   BFD_RELOC_MIPS16_TLS_GD
2275 ENUMX
2276   BFD_RELOC_MIPS16_TLS_LDM
2277 ENUMX
2278   BFD_RELOC_MIPS16_TLS_DTPREL_HI16
2279 ENUMX
2280   BFD_RELOC_MIPS16_TLS_DTPREL_LO16
2281 ENUMX
2282   BFD_RELOC_MIPS16_TLS_GOTTPREL
2283 ENUMX
2284   BFD_RELOC_MIPS16_TLS_TPREL_HI16
2285 ENUMX
2286   BFD_RELOC_MIPS16_TLS_TPREL_LO16
2287 ENUMDOC
2288   MIPS16 TLS relocations
2289
2290 ENUM
2291   BFD_RELOC_MIPS_LITERAL
2292 ENUMX
2293   BFD_RELOC_MICROMIPS_LITERAL
2294 ENUMDOC
2295   Relocation against a MIPS literal section.
2296
2297 ENUM
2298   BFD_RELOC_MICROMIPS_7_PCREL_S1
2299 ENUMX
2300   BFD_RELOC_MICROMIPS_10_PCREL_S1
2301 ENUMX
2302   BFD_RELOC_MICROMIPS_16_PCREL_S1
2303 ENUMDOC
2304   microMIPS PC-relative relocations.
2305
2306 ENUM
2307   BFD_RELOC_MIPS_21_PCREL_S2
2308 ENUMX
2309   BFD_RELOC_MIPS_26_PCREL_S2
2310 ENUMX
2311   BFD_RELOC_MIPS_18_PCREL_S3
2312 ENUMX
2313   BFD_RELOC_MIPS_19_PCREL_S2
2314 ENUMDOC
2315   MIPS PC-relative relocations.
2316
2317 ENUM
2318   BFD_RELOC_MICROMIPS_GPREL16
2319 ENUMX
2320   BFD_RELOC_MICROMIPS_HI16
2321 ENUMX
2322   BFD_RELOC_MICROMIPS_HI16_S
2323 ENUMX
2324   BFD_RELOC_MICROMIPS_LO16
2325 ENUMDOC
2326   microMIPS versions of generic BFD relocs.
2327
2328 ENUM
2329   BFD_RELOC_MIPS_GOT16
2330 ENUMX
2331   BFD_RELOC_MICROMIPS_GOT16
2332 ENUMX
2333   BFD_RELOC_MIPS_CALL16
2334 ENUMX
2335   BFD_RELOC_MICROMIPS_CALL16
2336 ENUMX
2337   BFD_RELOC_MIPS_GOT_HI16
2338 ENUMX
2339   BFD_RELOC_MICROMIPS_GOT_HI16
2340 ENUMX
2341   BFD_RELOC_MIPS_GOT_LO16
2342 ENUMX
2343   BFD_RELOC_MICROMIPS_GOT_LO16
2344 ENUMX
2345   BFD_RELOC_MIPS_CALL_HI16
2346 ENUMX
2347   BFD_RELOC_MICROMIPS_CALL_HI16
2348 ENUMX
2349   BFD_RELOC_MIPS_CALL_LO16
2350 ENUMX
2351   BFD_RELOC_MICROMIPS_CALL_LO16
2352 ENUMX
2353   BFD_RELOC_MIPS_SUB
2354 ENUMX
2355   BFD_RELOC_MICROMIPS_SUB
2356 ENUMX
2357   BFD_RELOC_MIPS_GOT_PAGE
2358 ENUMX
2359   BFD_RELOC_MICROMIPS_GOT_PAGE
2360 ENUMX
2361   BFD_RELOC_MIPS_GOT_OFST
2362 ENUMX
2363   BFD_RELOC_MICROMIPS_GOT_OFST
2364 ENUMX
2365   BFD_RELOC_MIPS_GOT_DISP
2366 ENUMX
2367   BFD_RELOC_MICROMIPS_GOT_DISP
2368 ENUMX
2369   BFD_RELOC_MIPS_SHIFT5
2370 ENUMX
2371   BFD_RELOC_MIPS_SHIFT6
2372 ENUMX
2373   BFD_RELOC_MIPS_INSERT_A
2374 ENUMX
2375   BFD_RELOC_MIPS_INSERT_B
2376 ENUMX
2377   BFD_RELOC_MIPS_DELETE
2378 ENUMX
2379   BFD_RELOC_MIPS_HIGHEST
2380 ENUMX
2381   BFD_RELOC_MICROMIPS_HIGHEST
2382 ENUMX
2383   BFD_RELOC_MIPS_HIGHER
2384 ENUMX
2385   BFD_RELOC_MICROMIPS_HIGHER
2386 ENUMX
2387   BFD_RELOC_MIPS_SCN_DISP
2388 ENUMX
2389   BFD_RELOC_MICROMIPS_SCN_DISP
2390 ENUMX
2391   BFD_RELOC_MIPS_REL16
2392 ENUMX
2393   BFD_RELOC_MIPS_RELGOT
2394 ENUMX
2395   BFD_RELOC_MIPS_JALR
2396 ENUMX
2397   BFD_RELOC_MICROMIPS_JALR
2398 ENUMX
2399   BFD_RELOC_MIPS_TLS_DTPMOD32
2400 ENUMX
2401   BFD_RELOC_MIPS_TLS_DTPREL32
2402 ENUMX
2403   BFD_RELOC_MIPS_TLS_DTPMOD64
2404 ENUMX
2405   BFD_RELOC_MIPS_TLS_DTPREL64
2406 ENUMX
2407   BFD_RELOC_MIPS_TLS_GD
2408 ENUMX
2409   BFD_RELOC_MICROMIPS_TLS_GD
2410 ENUMX
2411   BFD_RELOC_MIPS_TLS_LDM
2412 ENUMX
2413   BFD_RELOC_MICROMIPS_TLS_LDM
2414 ENUMX
2415   BFD_RELOC_MIPS_TLS_DTPREL_HI16
2416 ENUMX
2417   BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16
2418 ENUMX
2419   BFD_RELOC_MIPS_TLS_DTPREL_LO16
2420 ENUMX
2421   BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16
2422 ENUMX
2423   BFD_RELOC_MIPS_TLS_GOTTPREL
2424 ENUMX
2425   BFD_RELOC_MICROMIPS_TLS_GOTTPREL
2426 ENUMX
2427   BFD_RELOC_MIPS_TLS_TPREL32
2428 ENUMX
2429   BFD_RELOC_MIPS_TLS_TPREL64
2430 ENUMX
2431   BFD_RELOC_MIPS_TLS_TPREL_HI16
2432 ENUMX
2433   BFD_RELOC_MICROMIPS_TLS_TPREL_HI16
2434 ENUMX
2435   BFD_RELOC_MIPS_TLS_TPREL_LO16
2436 ENUMX
2437   BFD_RELOC_MICROMIPS_TLS_TPREL_LO16
2438 ENUMX
2439   BFD_RELOC_MIPS_EH
2440 ENUMDOC
2441   MIPS ELF relocations.
2442 COMMENT
2443
2444 ENUM
2445   BFD_RELOC_MIPS_COPY
2446 ENUMX
2447   BFD_RELOC_MIPS_JUMP_SLOT
2448 ENUMDOC
2449   MIPS ELF relocations (VxWorks and PLT extensions).
2450 COMMENT
2451
2452 ENUM
2453   BFD_RELOC_MOXIE_10_PCREL
2454 ENUMDOC
2455   Moxie ELF relocations.
2456 COMMENT
2457
2458 ENUM
2459   BFD_RELOC_FT32_10
2460 ENUMX
2461   BFD_RELOC_FT32_20
2462 ENUMX
2463   BFD_RELOC_FT32_17
2464 ENUMX
2465   BFD_RELOC_FT32_18
2466 ENUMDOC
2467   FT32 ELF relocations.
2468 COMMENT
2469
2470 ENUM
2471   BFD_RELOC_FRV_LABEL16
2472 ENUMX
2473   BFD_RELOC_FRV_LABEL24
2474 ENUMX
2475   BFD_RELOC_FRV_LO16
2476 ENUMX
2477   BFD_RELOC_FRV_HI16
2478 ENUMX
2479   BFD_RELOC_FRV_GPREL12
2480 ENUMX
2481   BFD_RELOC_FRV_GPRELU12
2482 ENUMX
2483   BFD_RELOC_FRV_GPREL32
2484 ENUMX
2485   BFD_RELOC_FRV_GPRELHI
2486 ENUMX
2487   BFD_RELOC_FRV_GPRELLO
2488 ENUMX
2489   BFD_RELOC_FRV_GOT12
2490 ENUMX
2491   BFD_RELOC_FRV_GOTHI
2492 ENUMX
2493   BFD_RELOC_FRV_GOTLO
2494 ENUMX
2495   BFD_RELOC_FRV_FUNCDESC
2496 ENUMX
2497   BFD_RELOC_FRV_FUNCDESC_GOT12
2498 ENUMX
2499   BFD_RELOC_FRV_FUNCDESC_GOTHI
2500 ENUMX
2501   BFD_RELOC_FRV_FUNCDESC_GOTLO
2502 ENUMX
2503   BFD_RELOC_FRV_FUNCDESC_VALUE
2504 ENUMX
2505   BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2506 ENUMX
2507   BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2508 ENUMX
2509   BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2510 ENUMX
2511   BFD_RELOC_FRV_GOTOFF12
2512 ENUMX
2513   BFD_RELOC_FRV_GOTOFFHI
2514 ENUMX
2515   BFD_RELOC_FRV_GOTOFFLO
2516 ENUMX
2517   BFD_RELOC_FRV_GETTLSOFF
2518 ENUMX
2519   BFD_RELOC_FRV_TLSDESC_VALUE
2520 ENUMX
2521   BFD_RELOC_FRV_GOTTLSDESC12
2522 ENUMX
2523   BFD_RELOC_FRV_GOTTLSDESCHI
2524 ENUMX
2525   BFD_RELOC_FRV_GOTTLSDESCLO
2526 ENUMX
2527   BFD_RELOC_FRV_TLSMOFF12
2528 ENUMX
2529   BFD_RELOC_FRV_TLSMOFFHI
2530 ENUMX
2531   BFD_RELOC_FRV_TLSMOFFLO
2532 ENUMX
2533   BFD_RELOC_FRV_GOTTLSOFF12
2534 ENUMX
2535   BFD_RELOC_FRV_GOTTLSOFFHI
2536 ENUMX
2537   BFD_RELOC_FRV_GOTTLSOFFLO
2538 ENUMX
2539   BFD_RELOC_FRV_TLSOFF
2540 ENUMX
2541   BFD_RELOC_FRV_TLSDESC_RELAX
2542 ENUMX
2543   BFD_RELOC_FRV_GETTLSOFF_RELAX
2544 ENUMX
2545   BFD_RELOC_FRV_TLSOFF_RELAX
2546 ENUMX
2547   BFD_RELOC_FRV_TLSMOFF
2548 ENUMDOC
2549   Fujitsu Frv Relocations.
2550 COMMENT
2551
2552 ENUM
2553   BFD_RELOC_MN10300_GOTOFF24
2554 ENUMDOC
2555   This is a 24bit GOT-relative reloc for the mn10300.
2556 ENUM
2557   BFD_RELOC_MN10300_GOT32
2558 ENUMDOC
2559   This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2560   in the instruction.
2561 ENUM
2562   BFD_RELOC_MN10300_GOT24
2563 ENUMDOC
2564   This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2565   in the instruction.
2566 ENUM
2567   BFD_RELOC_MN10300_GOT16
2568 ENUMDOC
2569   This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2570   in the instruction.
2571 ENUM
2572   BFD_RELOC_MN10300_COPY
2573 ENUMDOC
2574   Copy symbol at runtime.
2575 ENUM
2576   BFD_RELOC_MN10300_GLOB_DAT
2577 ENUMDOC
2578   Create GOT entry.
2579 ENUM
2580   BFD_RELOC_MN10300_JMP_SLOT
2581 ENUMDOC
2582   Create PLT entry.
2583 ENUM
2584   BFD_RELOC_MN10300_RELATIVE
2585 ENUMDOC
2586   Adjust by program base.
2587 ENUM
2588   BFD_RELOC_MN10300_SYM_DIFF
2589 ENUMDOC
2590   Together with another reloc targeted at the same location,
2591   allows for a value that is the difference of two symbols
2592   in the same section.
2593 ENUM
2594   BFD_RELOC_MN10300_ALIGN
2595 ENUMDOC
2596   The addend of this reloc is an alignment power that must
2597   be honoured at the offset's location, regardless of linker
2598   relaxation.
2599 ENUM
2600   BFD_RELOC_MN10300_TLS_GD
2601 ENUMX
2602   BFD_RELOC_MN10300_TLS_LD
2603 ENUMX
2604   BFD_RELOC_MN10300_TLS_LDO
2605 ENUMX
2606   BFD_RELOC_MN10300_TLS_GOTIE
2607 ENUMX
2608   BFD_RELOC_MN10300_TLS_IE
2609 ENUMX
2610   BFD_RELOC_MN10300_TLS_LE
2611 ENUMX
2612   BFD_RELOC_MN10300_TLS_DTPMOD
2613 ENUMX
2614   BFD_RELOC_MN10300_TLS_DTPOFF
2615 ENUMX
2616   BFD_RELOC_MN10300_TLS_TPOFF
2617 ENUMDOC
2618   Various TLS-related relocations.
2619 ENUM
2620   BFD_RELOC_MN10300_32_PCREL
2621 ENUMDOC
2622   This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
2623   instruction.
2624 ENUM
2625   BFD_RELOC_MN10300_16_PCREL
2626 ENUMDOC
2627   This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
2628   instruction.
2629 COMMENT
2630
2631 ENUM
2632   BFD_RELOC_386_GOT32
2633 ENUMX
2634   BFD_RELOC_386_PLT32
2635 ENUMX
2636   BFD_RELOC_386_COPY
2637 ENUMX
2638   BFD_RELOC_386_GLOB_DAT
2639 ENUMX
2640   BFD_RELOC_386_JUMP_SLOT
2641 ENUMX
2642   BFD_RELOC_386_RELATIVE
2643 ENUMX
2644   BFD_RELOC_386_GOTOFF
2645 ENUMX
2646   BFD_RELOC_386_GOTPC
2647 ENUMX
2648   BFD_RELOC_386_TLS_TPOFF
2649 ENUMX
2650   BFD_RELOC_386_TLS_IE
2651 ENUMX
2652   BFD_RELOC_386_TLS_GOTIE
2653 ENUMX
2654   BFD_RELOC_386_TLS_LE
2655 ENUMX
2656   BFD_RELOC_386_TLS_GD
2657 ENUMX
2658   BFD_RELOC_386_TLS_LDM
2659 ENUMX
2660   BFD_RELOC_386_TLS_LDO_32
2661 ENUMX
2662   BFD_RELOC_386_TLS_IE_32
2663 ENUMX
2664   BFD_RELOC_386_TLS_LE_32
2665 ENUMX
2666   BFD_RELOC_386_TLS_DTPMOD32
2667 ENUMX
2668   BFD_RELOC_386_TLS_DTPOFF32
2669 ENUMX
2670   BFD_RELOC_386_TLS_TPOFF32
2671 ENUMX
2672   BFD_RELOC_386_TLS_GOTDESC
2673 ENUMX
2674   BFD_RELOC_386_TLS_DESC_CALL
2675 ENUMX
2676   BFD_RELOC_386_TLS_DESC
2677 ENUMX
2678   BFD_RELOC_386_IRELATIVE
2679 ENUMX
2680   BFD_RELOC_386_GOT32X
2681 ENUMDOC
2682   i386/elf relocations
2683
2684 ENUM
2685   BFD_RELOC_X86_64_GOT32
2686 ENUMX
2687   BFD_RELOC_X86_64_PLT32
2688 ENUMX
2689   BFD_RELOC_X86_64_COPY
2690 ENUMX
2691   BFD_RELOC_X86_64_GLOB_DAT
2692 ENUMX
2693   BFD_RELOC_X86_64_JUMP_SLOT
2694 ENUMX
2695   BFD_RELOC_X86_64_RELATIVE
2696 ENUMX
2697   BFD_RELOC_X86_64_GOTPCREL
2698 ENUMX
2699   BFD_RELOC_X86_64_32S
2700 ENUMX
2701   BFD_RELOC_X86_64_DTPMOD64
2702 ENUMX
2703   BFD_RELOC_X86_64_DTPOFF64
2704 ENUMX
2705   BFD_RELOC_X86_64_TPOFF64
2706 ENUMX
2707   BFD_RELOC_X86_64_TLSGD
2708 ENUMX
2709   BFD_RELOC_X86_64_TLSLD
2710 ENUMX
2711   BFD_RELOC_X86_64_DTPOFF32
2712 ENUMX
2713   BFD_RELOC_X86_64_GOTTPOFF
2714 ENUMX
2715   BFD_RELOC_X86_64_TPOFF32
2716 ENUMX
2717   BFD_RELOC_X86_64_GOTOFF64
2718 ENUMX
2719   BFD_RELOC_X86_64_GOTPC32
2720 ENUMX
2721   BFD_RELOC_X86_64_GOT64
2722 ENUMX
2723   BFD_RELOC_X86_64_GOTPCREL64
2724 ENUMX
2725   BFD_RELOC_X86_64_GOTPC64
2726 ENUMX
2727   BFD_RELOC_X86_64_GOTPLT64
2728 ENUMX
2729   BFD_RELOC_X86_64_PLTOFF64
2730 ENUMX
2731   BFD_RELOC_X86_64_GOTPC32_TLSDESC
2732 ENUMX
2733   BFD_RELOC_X86_64_TLSDESC_CALL
2734 ENUMX
2735   BFD_RELOC_X86_64_TLSDESC
2736 ENUMX
2737   BFD_RELOC_X86_64_IRELATIVE
2738 ENUMX
2739   BFD_RELOC_X86_64_PC32_BND
2740 ENUMX
2741   BFD_RELOC_X86_64_PLT32_BND
2742 ENUMX
2743   BFD_RELOC_X86_64_GOTPCRELX
2744 ENUMX
2745   BFD_RELOC_X86_64_REX_GOTPCRELX
2746 ENUMDOC
2747   x86-64/elf relocations
2748
2749 ENUM
2750   BFD_RELOC_NS32K_IMM_8
2751 ENUMX
2752   BFD_RELOC_NS32K_IMM_16
2753 ENUMX
2754   BFD_RELOC_NS32K_IMM_32
2755 ENUMX
2756   BFD_RELOC_NS32K_IMM_8_PCREL
2757 ENUMX
2758   BFD_RELOC_NS32K_IMM_16_PCREL
2759 ENUMX
2760   BFD_RELOC_NS32K_IMM_32_PCREL
2761 ENUMX
2762   BFD_RELOC_NS32K_DISP_8
2763 ENUMX
2764   BFD_RELOC_NS32K_DISP_16
2765 ENUMX
2766   BFD_RELOC_NS32K_DISP_32
2767 ENUMX
2768   BFD_RELOC_NS32K_DISP_8_PCREL
2769 ENUMX
2770   BFD_RELOC_NS32K_DISP_16_PCREL
2771 ENUMX
2772   BFD_RELOC_NS32K_DISP_32_PCREL
2773 ENUMDOC
2774   ns32k relocations
2775
2776 ENUM
2777   BFD_RELOC_PDP11_DISP_8_PCREL
2778 ENUMX
2779   BFD_RELOC_PDP11_DISP_6_PCREL
2780 ENUMDOC
2781   PDP11 relocations
2782
2783 ENUM
2784   BFD_RELOC_PJ_CODE_HI16
2785 ENUMX
2786   BFD_RELOC_PJ_CODE_LO16
2787 ENUMX
2788   BFD_RELOC_PJ_CODE_DIR16
2789 ENUMX
2790   BFD_RELOC_PJ_CODE_DIR32
2791 ENUMX
2792   BFD_RELOC_PJ_CODE_REL16
2793 ENUMX
2794   BFD_RELOC_PJ_CODE_REL32
2795 ENUMDOC
2796   Picojava relocs.  Not all of these appear in object files.
2797
2798 ENUM
2799   BFD_RELOC_PPC_B26
2800 ENUMX
2801   BFD_RELOC_PPC_BA26
2802 ENUMX
2803   BFD_RELOC_PPC_TOC16
2804 ENUMX
2805   BFD_RELOC_PPC_B16
2806 ENUMX
2807   BFD_RELOC_PPC_B16_BRTAKEN
2808 ENUMX
2809   BFD_RELOC_PPC_B16_BRNTAKEN
2810 ENUMX
2811   BFD_RELOC_PPC_BA16
2812 ENUMX
2813   BFD_RELOC_PPC_BA16_BRTAKEN
2814 ENUMX
2815   BFD_RELOC_PPC_BA16_BRNTAKEN
2816 ENUMX
2817   BFD_RELOC_PPC_COPY
2818 ENUMX
2819   BFD_RELOC_PPC_GLOB_DAT
2820 ENUMX
2821   BFD_RELOC_PPC_JMP_SLOT
2822 ENUMX
2823   BFD_RELOC_PPC_RELATIVE
2824 ENUMX
2825   BFD_RELOC_PPC_LOCAL24PC
2826 ENUMX
2827   BFD_RELOC_PPC_EMB_NADDR32
2828 ENUMX
2829   BFD_RELOC_PPC_EMB_NADDR16
2830 ENUMX
2831   BFD_RELOC_PPC_EMB_NADDR16_LO
2832 ENUMX
2833   BFD_RELOC_PPC_EMB_NADDR16_HI
2834 ENUMX
2835   BFD_RELOC_PPC_EMB_NADDR16_HA
2836 ENUMX
2837   BFD_RELOC_PPC_EMB_SDAI16
2838 ENUMX
2839   BFD_RELOC_PPC_EMB_SDA2I16
2840 ENUMX
2841   BFD_RELOC_PPC_EMB_SDA2REL
2842 ENUMX
2843   BFD_RELOC_PPC_EMB_SDA21
2844 ENUMX
2845   BFD_RELOC_PPC_EMB_MRKREF
2846 ENUMX
2847   BFD_RELOC_PPC_EMB_RELSEC16
2848 ENUMX
2849   BFD_RELOC_PPC_EMB_RELST_LO
2850 ENUMX
2851   BFD_RELOC_PPC_EMB_RELST_HI
2852 ENUMX
2853   BFD_RELOC_PPC_EMB_RELST_HA
2854 ENUMX
2855   BFD_RELOC_PPC_EMB_BIT_FLD
2856 ENUMX
2857   BFD_RELOC_PPC_EMB_RELSDA
2858 ENUMX
2859   BFD_RELOC_PPC_VLE_REL8
2860 ENUMX
2861   BFD_RELOC_PPC_VLE_REL15
2862 ENUMX
2863   BFD_RELOC_PPC_VLE_REL24
2864 ENUMX
2865   BFD_RELOC_PPC_VLE_LO16A
2866 ENUMX
2867   BFD_RELOC_PPC_VLE_LO16D
2868 ENUMX
2869   BFD_RELOC_PPC_VLE_HI16A
2870 ENUMX
2871   BFD_RELOC_PPC_VLE_HI16D
2872 ENUMX
2873   BFD_RELOC_PPC_VLE_HA16A
2874 ENUMX
2875   BFD_RELOC_PPC_VLE_HA16D
2876 ENUMX
2877   BFD_RELOC_PPC_VLE_SDA21
2878 ENUMX
2879   BFD_RELOC_PPC_VLE_SDA21_LO
2880 ENUMX
2881   BFD_RELOC_PPC_VLE_SDAREL_LO16A
2882 ENUMX
2883   BFD_RELOC_PPC_VLE_SDAREL_LO16D
2884 ENUMX
2885   BFD_RELOC_PPC_VLE_SDAREL_HI16A
2886 ENUMX
2887   BFD_RELOC_PPC_VLE_SDAREL_HI16D
2888 ENUMX
2889   BFD_RELOC_PPC_VLE_SDAREL_HA16A
2890 ENUMX
2891   BFD_RELOC_PPC_VLE_SDAREL_HA16D
2892 ENUMX
2893   BFD_RELOC_PPC_REL16DX_HA
2894 ENUMX
2895   BFD_RELOC_PPC64_HIGHER
2896 ENUMX
2897   BFD_RELOC_PPC64_HIGHER_S
2898 ENUMX
2899   BFD_RELOC_PPC64_HIGHEST
2900 ENUMX
2901   BFD_RELOC_PPC64_HIGHEST_S
2902 ENUMX
2903   BFD_RELOC_PPC64_TOC16_LO
2904 ENUMX
2905   BFD_RELOC_PPC64_TOC16_HI
2906 ENUMX
2907   BFD_RELOC_PPC64_TOC16_HA
2908 ENUMX
2909   BFD_RELOC_PPC64_TOC
2910 ENUMX
2911   BFD_RELOC_PPC64_PLTGOT16
2912 ENUMX
2913   BFD_RELOC_PPC64_PLTGOT16_LO
2914 ENUMX
2915   BFD_RELOC_PPC64_PLTGOT16_HI
2916 ENUMX
2917   BFD_RELOC_PPC64_PLTGOT16_HA
2918 ENUMX
2919   BFD_RELOC_PPC64_ADDR16_DS
2920 ENUMX
2921   BFD_RELOC_PPC64_ADDR16_LO_DS
2922 ENUMX
2923   BFD_RELOC_PPC64_GOT16_DS
2924 ENUMX
2925   BFD_RELOC_PPC64_GOT16_LO_DS
2926 ENUMX
2927   BFD_RELOC_PPC64_PLT16_LO_DS
2928 ENUMX
2929   BFD_RELOC_PPC64_SECTOFF_DS
2930 ENUMX
2931   BFD_RELOC_PPC64_SECTOFF_LO_DS
2932 ENUMX
2933   BFD_RELOC_PPC64_TOC16_DS
2934 ENUMX
2935   BFD_RELOC_PPC64_TOC16_LO_DS
2936 ENUMX
2937   BFD_RELOC_PPC64_PLTGOT16_DS
2938 ENUMX
2939   BFD_RELOC_PPC64_PLTGOT16_LO_DS
2940 ENUMX
2941   BFD_RELOC_PPC64_ADDR16_HIGH
2942 ENUMX
2943   BFD_RELOC_PPC64_ADDR16_HIGHA
2944 ENUMX
2945   BFD_RELOC_PPC64_ADDR64_LOCAL
2946 ENUMX
2947   BFD_RELOC_PPC64_ENTRY
2948 ENUMDOC
2949   Power(rs6000) and PowerPC relocations.
2950
2951 ENUM
2952   BFD_RELOC_PPC_TLS
2953 ENUMX
2954   BFD_RELOC_PPC_TLSGD
2955 ENUMX
2956   BFD_RELOC_PPC_TLSLD
2957 ENUMX
2958   BFD_RELOC_PPC_DTPMOD
2959 ENUMX
2960   BFD_RELOC_PPC_TPREL16
2961 ENUMX
2962   BFD_RELOC_PPC_TPREL16_LO
2963 ENUMX
2964   BFD_RELOC_PPC_TPREL16_HI
2965 ENUMX
2966   BFD_RELOC_PPC_TPREL16_HA
2967 ENUMX
2968   BFD_RELOC_PPC_TPREL
2969 ENUMX
2970   BFD_RELOC_PPC_DTPREL16
2971 ENUMX
2972   BFD_RELOC_PPC_DTPREL16_LO
2973 ENUMX
2974   BFD_RELOC_PPC_DTPREL16_HI
2975 ENUMX
2976   BFD_RELOC_PPC_DTPREL16_HA
2977 ENUMX
2978   BFD_RELOC_PPC_DTPREL
2979 ENUMX
2980   BFD_RELOC_PPC_GOT_TLSGD16
2981 ENUMX
2982   BFD_RELOC_PPC_GOT_TLSGD16_LO
2983 ENUMX
2984   BFD_RELOC_PPC_GOT_TLSGD16_HI
2985 ENUMX
2986   BFD_RELOC_PPC_GOT_TLSGD16_HA
2987 ENUMX
2988   BFD_RELOC_PPC_GOT_TLSLD16
2989 ENUMX
2990   BFD_RELOC_PPC_GOT_TLSLD16_LO
2991 ENUMX
2992   BFD_RELOC_PPC_GOT_TLSLD16_HI
2993 ENUMX
2994   BFD_RELOC_PPC_GOT_TLSLD16_HA
2995 ENUMX
2996   BFD_RELOC_PPC_GOT_TPREL16
2997 ENUMX
2998   BFD_RELOC_PPC_GOT_TPREL16_LO
2999 ENUMX
3000   BFD_RELOC_PPC_GOT_TPREL16_HI
3001 ENUMX
3002   BFD_RELOC_PPC_GOT_TPREL16_HA
3003 ENUMX
3004   BFD_RELOC_PPC_GOT_DTPREL16
3005 ENUMX
3006   BFD_RELOC_PPC_GOT_DTPREL16_LO
3007 ENUMX
3008   BFD_RELOC_PPC_GOT_DTPREL16_HI
3009 ENUMX
3010   BFD_RELOC_PPC_GOT_DTPREL16_HA
3011 ENUMX
3012   BFD_RELOC_PPC64_TPREL16_DS
3013 ENUMX
3014   BFD_RELOC_PPC64_TPREL16_LO_DS
3015 ENUMX
3016   BFD_RELOC_PPC64_TPREL16_HIGHER
3017 ENUMX
3018   BFD_RELOC_PPC64_TPREL16_HIGHERA
3019 ENUMX
3020   BFD_RELOC_PPC64_TPREL16_HIGHEST
3021 ENUMX
3022   BFD_RELOC_PPC64_TPREL16_HIGHESTA
3023 ENUMX
3024   BFD_RELOC_PPC64_DTPREL16_DS
3025 ENUMX
3026   BFD_RELOC_PPC64_DTPREL16_LO_DS
3027 ENUMX
3028   BFD_RELOC_PPC64_DTPREL16_HIGHER
3029 ENUMX
3030   BFD_RELOC_PPC64_DTPREL16_HIGHERA
3031 ENUMX
3032   BFD_RELOC_PPC64_DTPREL16_HIGHEST
3033 ENUMX
3034   BFD_RELOC_PPC64_DTPREL16_HIGHESTA
3035 ENUMX
3036   BFD_RELOC_PPC64_TPREL16_HIGH
3037 ENUMX
3038   BFD_RELOC_PPC64_TPREL16_HIGHA
3039 ENUMX
3040   BFD_RELOC_PPC64_DTPREL16_HIGH
3041 ENUMX
3042   BFD_RELOC_PPC64_DTPREL16_HIGHA
3043 ENUMDOC
3044   PowerPC and PowerPC64 thread-local storage relocations.
3045
3046 ENUM
3047   BFD_RELOC_I370_D12
3048 ENUMDOC
3049   IBM 370/390 relocations
3050
3051 ENUM
3052   BFD_RELOC_CTOR
3053 ENUMDOC
3054   The type of reloc used to build a constructor table - at the moment
3055   probably a 32 bit wide absolute relocation, but the target can choose.
3056   It generally does map to one of the other relocation types.
3057
3058 ENUM
3059   BFD_RELOC_ARM_PCREL_BRANCH
3060 ENUMDOC
3061   ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
3062   not stored in the instruction.
3063 ENUM
3064   BFD_RELOC_ARM_PCREL_BLX
3065 ENUMDOC
3066   ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
3067   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
3068   field in the instruction.
3069 ENUM
3070   BFD_RELOC_THUMB_PCREL_BLX
3071 ENUMDOC
3072   Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
3073   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
3074   field in the instruction.
3075 ENUM
3076   BFD_RELOC_ARM_PCREL_CALL
3077 ENUMDOC
3078   ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
3079 ENUM
3080   BFD_RELOC_ARM_PCREL_JUMP
3081 ENUMDOC
3082   ARM 26-bit pc-relative branch for B or conditional BL instruction.
3083
3084 ENUM
3085   BFD_RELOC_THUMB_PCREL_BRANCH7
3086 ENUMX
3087   BFD_RELOC_THUMB_PCREL_BRANCH9
3088 ENUMX
3089   BFD_RELOC_THUMB_PCREL_BRANCH12
3090 ENUMX
3091   BFD_RELOC_THUMB_PCREL_BRANCH20
3092 ENUMX
3093   BFD_RELOC_THUMB_PCREL_BRANCH23
3094 ENUMX
3095   BFD_RELOC_THUMB_PCREL_BRANCH25
3096 ENUMDOC
3097   Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
3098   The lowest bit must be zero and is not stored in the instruction.
3099   Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
3100   "nn" one smaller in all cases.  Note further that BRANCH23
3101   corresponds to R_ARM_THM_CALL.
3102
3103 ENUM
3104   BFD_RELOC_ARM_OFFSET_IMM
3105 ENUMDOC
3106   12-bit immediate offset, used in ARM-format ldr and str instructions.
3107
3108 ENUM
3109   BFD_RELOC_ARM_THUMB_OFFSET
3110 ENUMDOC
3111   5-bit immediate offset, used in Thumb-format ldr and str instructions.
3112
3113 ENUM
3114   BFD_RELOC_ARM_TARGET1
3115 ENUMDOC
3116   Pc-relative or absolute relocation depending on target.  Used for
3117   entries in .init_array sections.
3118 ENUM
3119   BFD_RELOC_ARM_ROSEGREL32
3120 ENUMDOC
3121   Read-only segment base relative address.
3122 ENUM
3123   BFD_RELOC_ARM_SBREL32
3124 ENUMDOC
3125   Data segment base relative address.
3126 ENUM
3127   BFD_RELOC_ARM_TARGET2
3128 ENUMDOC
3129   This reloc is used for references to RTTI data from exception handling
3130   tables.  The actual definition depends on the target.  It may be a
3131   pc-relative or some form of GOT-indirect relocation.
3132 ENUM
3133   BFD_RELOC_ARM_PREL31
3134 ENUMDOC
3135   31-bit PC relative address.
3136 ENUM
3137   BFD_RELOC_ARM_MOVW
3138 ENUMX
3139   BFD_RELOC_ARM_MOVT
3140 ENUMX
3141   BFD_RELOC_ARM_MOVW_PCREL
3142 ENUMX
3143   BFD_RELOC_ARM_MOVT_PCREL
3144 ENUMX
3145   BFD_RELOC_ARM_THUMB_MOVW
3146 ENUMX
3147   BFD_RELOC_ARM_THUMB_MOVT
3148 ENUMX
3149   BFD_RELOC_ARM_THUMB_MOVW_PCREL
3150 ENUMX
3151   BFD_RELOC_ARM_THUMB_MOVT_PCREL
3152 ENUMDOC
3153   Low and High halfword relocations for MOVW and MOVT instructions.
3154
3155 ENUM
3156   BFD_RELOC_ARM_JUMP_SLOT
3157 ENUMX
3158   BFD_RELOC_ARM_GLOB_DAT
3159 ENUMX
3160   BFD_RELOC_ARM_GOT32
3161 ENUMX
3162   BFD_RELOC_ARM_PLT32
3163 ENUMX
3164   BFD_RELOC_ARM_RELATIVE
3165 ENUMX
3166   BFD_RELOC_ARM_GOTOFF
3167 ENUMX
3168   BFD_RELOC_ARM_GOTPC
3169 ENUMX
3170   BFD_RELOC_ARM_GOT_PREL
3171 ENUMDOC
3172   Relocations for setting up GOTs and PLTs for shared libraries.
3173
3174 ENUM
3175   BFD_RELOC_ARM_TLS_GD32
3176 ENUMX
3177   BFD_RELOC_ARM_TLS_LDO32
3178 ENUMX
3179   BFD_RELOC_ARM_TLS_LDM32
3180 ENUMX
3181   BFD_RELOC_ARM_TLS_DTPOFF32
3182 ENUMX
3183   BFD_RELOC_ARM_TLS_DTPMOD32
3184 ENUMX
3185   BFD_RELOC_ARM_TLS_TPOFF32
3186 ENUMX
3187   BFD_RELOC_ARM_TLS_IE32
3188 ENUMX
3189   BFD_RELOC_ARM_TLS_LE32
3190 ENUMX
3191   BFD_RELOC_ARM_TLS_GOTDESC
3192 ENUMX
3193   BFD_RELOC_ARM_TLS_CALL
3194 ENUMX
3195   BFD_RELOC_ARM_THM_TLS_CALL
3196 ENUMX
3197   BFD_RELOC_ARM_TLS_DESCSEQ
3198 ENUMX
3199   BFD_RELOC_ARM_THM_TLS_DESCSEQ
3200 ENUMX
3201   BFD_RELOC_ARM_TLS_DESC
3202 ENUMDOC
3203   ARM thread-local storage relocations.
3204
3205 ENUM
3206   BFD_RELOC_ARM_ALU_PC_G0_NC
3207 ENUMX
3208   BFD_RELOC_ARM_ALU_PC_G0
3209 ENUMX
3210   BFD_RELOC_ARM_ALU_PC_G1_NC
3211 ENUMX
3212   BFD_RELOC_ARM_ALU_PC_G1
3213 ENUMX
3214   BFD_RELOC_ARM_ALU_PC_G2
3215 ENUMX
3216   BFD_RELOC_ARM_LDR_PC_G0
3217 ENUMX
3218   BFD_RELOC_ARM_LDR_PC_G1
3219 ENUMX
3220   BFD_RELOC_ARM_LDR_PC_G2
3221 ENUMX
3222   BFD_RELOC_ARM_LDRS_PC_G0
3223 ENUMX
3224   BFD_RELOC_ARM_LDRS_PC_G1
3225 ENUMX
3226   BFD_RELOC_ARM_LDRS_PC_G2
3227 ENUMX
3228   BFD_RELOC_ARM_LDC_PC_G0
3229 ENUMX
3230   BFD_RELOC_ARM_LDC_PC_G1
3231 ENUMX
3232   BFD_RELOC_ARM_LDC_PC_G2
3233 ENUMX
3234   BFD_RELOC_ARM_ALU_SB_G0_NC
3235 ENUMX
3236   BFD_RELOC_ARM_ALU_SB_G0
3237 ENUMX
3238   BFD_RELOC_ARM_ALU_SB_G1_NC
3239 ENUMX
3240   BFD_RELOC_ARM_ALU_SB_G1
3241 ENUMX
3242   BFD_RELOC_ARM_ALU_SB_G2
3243 ENUMX
3244   BFD_RELOC_ARM_LDR_SB_G0
3245 ENUMX
3246   BFD_RELOC_ARM_LDR_SB_G1
3247 ENUMX
3248   BFD_RELOC_ARM_LDR_SB_G2
3249 ENUMX
3250   BFD_RELOC_ARM_LDRS_SB_G0
3251 ENUMX
3252   BFD_RELOC_ARM_LDRS_SB_G1
3253 ENUMX
3254   BFD_RELOC_ARM_LDRS_SB_G2
3255 ENUMX
3256   BFD_RELOC_ARM_LDC_SB_G0
3257 ENUMX
3258   BFD_RELOC_ARM_LDC_SB_G1
3259 ENUMX
3260   BFD_RELOC_ARM_LDC_SB_G2
3261 ENUMDOC
3262   ARM group relocations.
3263
3264 ENUM
3265   BFD_RELOC_ARM_V4BX
3266 ENUMDOC
3267   Annotation of BX instructions.
3268
3269 ENUM
3270   BFD_RELOC_ARM_IRELATIVE
3271 ENUMDOC
3272   ARM support for STT_GNU_IFUNC.
3273
3274 ENUM
3275   BFD_RELOC_ARM_THUMB_ALU_ABS_G0_NC
3276 ENUMX
3277   BFD_RELOC_ARM_THUMB_ALU_ABS_G1_NC
3278 ENUMX
3279   BFD_RELOC_ARM_THUMB_ALU_ABS_G2_NC
3280 ENUMX
3281   BFD_RELOC_ARM_THUMB_ALU_ABS_G3_NC
3282 ENUMDOC
3283   Thumb1 relocations to support execute-only code.
3284
3285 ENUM
3286   BFD_RELOC_ARM_IMMEDIATE
3287 ENUMX
3288   BFD_RELOC_ARM_ADRL_IMMEDIATE
3289 ENUMX
3290   BFD_RELOC_ARM_T32_IMMEDIATE
3291 ENUMX
3292   BFD_RELOC_ARM_T32_ADD_IMM
3293 ENUMX
3294   BFD_RELOC_ARM_T32_IMM12
3295 ENUMX
3296   BFD_RELOC_ARM_T32_ADD_PC12
3297 ENUMX
3298   BFD_RELOC_ARM_SHIFT_IMM
3299 ENUMX
3300   BFD_RELOC_ARM_SMC
3301 ENUMX
3302   BFD_RELOC_ARM_HVC
3303 ENUMX
3304   BFD_RELOC_ARM_SWI
3305 ENUMX
3306   BFD_RELOC_ARM_MULTI
3307 ENUMX
3308   BFD_RELOC_ARM_CP_OFF_IMM
3309 ENUMX
3310   BFD_RELOC_ARM_CP_OFF_IMM_S2
3311 ENUMX
3312   BFD_RELOC_ARM_T32_CP_OFF_IMM
3313 ENUMX
3314   BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
3315 ENUMX
3316   BFD_RELOC_ARM_ADR_IMM
3317 ENUMX
3318   BFD_RELOC_ARM_LDR_IMM
3319 ENUMX
3320   BFD_RELOC_ARM_LITERAL
3321 ENUMX
3322   BFD_RELOC_ARM_IN_POOL
3323 ENUMX
3324   BFD_RELOC_ARM_OFFSET_IMM8
3325 ENUMX
3326   BFD_RELOC_ARM_T32_OFFSET_U8
3327 ENUMX
3328   BFD_RELOC_ARM_T32_OFFSET_IMM
3329 ENUMX
3330   BFD_RELOC_ARM_HWLITERAL
3331 ENUMX
3332   BFD_RELOC_ARM_THUMB_ADD
3333 ENUMX
3334   BFD_RELOC_ARM_THUMB_IMM
3335 ENUMX
3336   BFD_RELOC_ARM_THUMB_SHIFT
3337 ENUMDOC
3338   These relocs are only used within the ARM assembler.  They are not
3339   (at present) written to any object files.
3340
3341 ENUM
3342   BFD_RELOC_SH_PCDISP8BY2
3343 ENUMX
3344   BFD_RELOC_SH_PCDISP12BY2
3345 ENUMX
3346   BFD_RELOC_SH_IMM3
3347 ENUMX
3348   BFD_RELOC_SH_IMM3U
3349 ENUMX
3350   BFD_RELOC_SH_DISP12
3351 ENUMX
3352   BFD_RELOC_SH_DISP12BY2
3353 ENUMX
3354   BFD_RELOC_SH_DISP12BY4
3355 ENUMX
3356   BFD_RELOC_SH_DISP12BY8
3357 ENUMX
3358   BFD_RELOC_SH_DISP20
3359 ENUMX
3360   BFD_RELOC_SH_DISP20BY8
3361 ENUMX
3362   BFD_RELOC_SH_IMM4
3363 ENUMX
3364   BFD_RELOC_SH_IMM4BY2
3365 ENUMX
3366   BFD_RELOC_SH_IMM4BY4
3367 ENUMX
3368   BFD_RELOC_SH_IMM8
3369 ENUMX
3370   BFD_RELOC_SH_IMM8BY2
3371 ENUMX
3372   BFD_RELOC_SH_IMM8BY4
3373 ENUMX
3374   BFD_RELOC_SH_PCRELIMM8BY2
3375 ENUMX
3376   BFD_RELOC_SH_PCRELIMM8BY4
3377 ENUMX
3378   BFD_RELOC_SH_SWITCH16
3379 ENUMX
3380   BFD_RELOC_SH_SWITCH32
3381 ENUMX
3382   BFD_RELOC_SH_USES
3383 ENUMX
3384   BFD_RELOC_SH_COUNT
3385 ENUMX
3386   BFD_RELOC_SH_ALIGN
3387 ENUMX
3388   BFD_RELOC_SH_CODE
3389 ENUMX
3390   BFD_RELOC_SH_DATA
3391 ENUMX
3392   BFD_RELOC_SH_LABEL
3393 ENUMX
3394   BFD_RELOC_SH_LOOP_START
3395 ENUMX
3396   BFD_RELOC_SH_LOOP_END
3397 ENUMX
3398   BFD_RELOC_SH_COPY
3399 ENUMX
3400   BFD_RELOC_SH_GLOB_DAT
3401 ENUMX
3402   BFD_RELOC_SH_JMP_SLOT
3403 ENUMX
3404   BFD_RELOC_SH_RELATIVE
3405 ENUMX
3406   BFD_RELOC_SH_GOTPC
3407 ENUMX
3408   BFD_RELOC_SH_GOT_LOW16
3409 ENUMX
3410   BFD_RELOC_SH_GOT_MEDLOW16
3411 ENUMX
3412   BFD_RELOC_SH_GOT_MEDHI16
3413 ENUMX
3414   BFD_RELOC_SH_GOT_HI16
3415 ENUMX
3416   BFD_RELOC_SH_GOTPLT_LOW16
3417 ENUMX
3418   BFD_RELOC_SH_GOTPLT_MEDLOW16
3419 ENUMX
3420   BFD_RELOC_SH_GOTPLT_MEDHI16
3421 ENUMX
3422   BFD_RELOC_SH_GOTPLT_HI16
3423 ENUMX
3424   BFD_RELOC_SH_PLT_LOW16
3425 ENUMX
3426   BFD_RELOC_SH_PLT_MEDLOW16
3427 ENUMX
3428   BFD_RELOC_SH_PLT_MEDHI16
3429 ENUMX
3430   BFD_RELOC_SH_PLT_HI16
3431 ENUMX
3432   BFD_RELOC_SH_GOTOFF_LOW16
3433 ENUMX
3434   BFD_RELOC_SH_GOTOFF_MEDLOW16
3435 ENUMX
3436   BFD_RELOC_SH_GOTOFF_MEDHI16
3437 ENUMX
3438   BFD_RELOC_SH_GOTOFF_HI16
3439 ENUMX
3440   BFD_RELOC_SH_GOTPC_LOW16
3441 ENUMX
3442   BFD_RELOC_SH_GOTPC_MEDLOW16
3443 ENUMX
3444   BFD_RELOC_SH_GOTPC_MEDHI16
3445 ENUMX
3446   BFD_RELOC_SH_GOTPC_HI16
3447 ENUMX
3448   BFD_RELOC_SH_COPY64
3449 ENUMX
3450   BFD_RELOC_SH_GLOB_DAT64
3451 ENUMX
3452   BFD_RELOC_SH_JMP_SLOT64
3453 ENUMX
3454   BFD_RELOC_SH_RELATIVE64
3455 ENUMX
3456   BFD_RELOC_SH_GOT10BY4
3457 ENUMX
3458   BFD_RELOC_SH_GOT10BY8
3459 ENUMX
3460   BFD_RELOC_SH_GOTPLT10BY4
3461 ENUMX
3462   BFD_RELOC_SH_GOTPLT10BY8
3463 ENUMX
3464   BFD_RELOC_SH_GOTPLT32
3465 ENUMX
3466   BFD_RELOC_SH_SHMEDIA_CODE
3467 ENUMX
3468   BFD_RELOC_SH_IMMU5
3469 ENUMX
3470   BFD_RELOC_SH_IMMS6
3471 ENUMX
3472   BFD_RELOC_SH_IMMS6BY32
3473 ENUMX
3474   BFD_RELOC_SH_IMMU6
3475 ENUMX
3476   BFD_RELOC_SH_IMMS10
3477 ENUMX
3478   BFD_RELOC_SH_IMMS10BY2
3479 ENUMX
3480   BFD_RELOC_SH_IMMS10BY4
3481 ENUMX
3482   BFD_RELOC_SH_IMMS10BY8
3483 ENUMX
3484   BFD_RELOC_SH_IMMS16
3485 ENUMX
3486   BFD_RELOC_SH_IMMU16
3487 ENUMX
3488   BFD_RELOC_SH_IMM_LOW16
3489 ENUMX
3490   BFD_RELOC_SH_IMM_LOW16_PCREL
3491 ENUMX
3492   BFD_RELOC_SH_IMM_MEDLOW16
3493 ENUMX
3494   BFD_RELOC_SH_IMM_MEDLOW16_PCREL
3495 ENUMX
3496   BFD_RELOC_SH_IMM_MEDHI16
3497 ENUMX
3498   BFD_RELOC_SH_IMM_MEDHI16_PCREL
3499 ENUMX
3500   BFD_RELOC_SH_IMM_HI16
3501 ENUMX
3502   BFD_RELOC_SH_IMM_HI16_PCREL
3503 ENUMX
3504   BFD_RELOC_SH_PT_16
3505 ENUMX
3506   BFD_RELOC_SH_TLS_GD_32
3507 ENUMX
3508   BFD_RELOC_SH_TLS_LD_32
3509 ENUMX
3510   BFD_RELOC_SH_TLS_LDO_32
3511 ENUMX
3512   BFD_RELOC_SH_TLS_IE_32
3513 ENUMX
3514   BFD_RELOC_SH_TLS_LE_32
3515 ENUMX
3516   BFD_RELOC_SH_TLS_DTPMOD32
3517 ENUMX
3518   BFD_RELOC_SH_TLS_DTPOFF32
3519 ENUMX
3520   BFD_RELOC_SH_TLS_TPOFF32
3521 ENUMX
3522   BFD_RELOC_SH_GOT20
3523 ENUMX
3524   BFD_RELOC_SH_GOTOFF20
3525 ENUMX
3526   BFD_RELOC_SH_GOTFUNCDESC
3527 ENUMX
3528   BFD_RELOC_SH_GOTFUNCDESC20
3529 ENUMX
3530   BFD_RELOC_SH_GOTOFFFUNCDESC
3531 ENUMX
3532   BFD_RELOC_SH_GOTOFFFUNCDESC20
3533 ENUMX
3534   BFD_RELOC_SH_FUNCDESC
3535 ENUMDOC
3536   Renesas / SuperH SH relocs.  Not all of these appear in object files.
3537
3538 ENUM
3539   BFD_RELOC_ARC_NONE
3540 ENUMX
3541   BFD_RELOC_ARC_8
3542 ENUMX
3543   BFD_RELOC_ARC_16
3544 ENUMX
3545   BFD_RELOC_ARC_24
3546 ENUMX
3547   BFD_RELOC_ARC_32
3548 ENUMX
3549   BFD_RELOC_ARC_N8
3550 ENUMX
3551   BFD_RELOC_ARC_N16
3552 ENUMX
3553   BFD_RELOC_ARC_N24
3554 ENUMX
3555   BFD_RELOC_ARC_N32
3556 ENUMX
3557   BFD_RELOC_ARC_SDA
3558 ENUMX
3559   BFD_RELOC_ARC_SECTOFF
3560 ENUMX
3561   BFD_RELOC_ARC_S21H_PCREL
3562 ENUMX
3563   BFD_RELOC_ARC_S21W_PCREL
3564 ENUMX
3565   BFD_RELOC_ARC_S25H_PCREL
3566 ENUMX
3567   BFD_RELOC_ARC_S25W_PCREL
3568 ENUMX
3569   BFD_RELOC_ARC_SDA32
3570 ENUMX
3571   BFD_RELOC_ARC_SDA_LDST
3572 ENUMX
3573   BFD_RELOC_ARC_SDA_LDST1
3574 ENUMX
3575   BFD_RELOC_ARC_SDA_LDST2
3576 ENUMX
3577   BFD_RELOC_ARC_SDA16_LD
3578 ENUMX
3579   BFD_RELOC_ARC_SDA16_LD1
3580 ENUMX
3581   BFD_RELOC_ARC_SDA16_LD2
3582 ENUMX
3583   BFD_RELOC_ARC_S13_PCREL
3584 ENUMX
3585   BFD_RELOC_ARC_W
3586 ENUMX
3587   BFD_RELOC_ARC_32_ME
3588 ENUMX
3589   BFD_RELOC_ARC_32_ME_S
3590 ENUMX
3591   BFD_RELOC_ARC_N32_ME
3592 ENUMX
3593   BFD_RELOC_ARC_SECTOFF_ME
3594 ENUMX
3595   BFD_RELOC_ARC_SDA32_ME
3596 ENUMX
3597   BFD_RELOC_ARC_W_ME
3598 ENUMX
3599   BFD_RELOC_AC_SECTOFF_U8
3600 ENUMX
3601   BFD_RELOC_AC_SECTOFF_U8_1
3602 ENUMX
3603   BFD_RELOC_AC_SECTOFF_U8_2
3604 ENUMX
3605   BFD_RELOC_AC_SECTFOFF_S9
3606 ENUMX
3607   BFD_RELOC_AC_SECTFOFF_S9_1
3608 ENUMX
3609   BFD_RELOC_AC_SECTFOFF_S9_2
3610 ENUMX
3611   BFD_RELOC_ARC_SECTOFF_ME_1
3612 ENUMX
3613   BFD_RELOC_ARC_SECTOFF_ME_2
3614 ENUMX
3615   BFD_RELOC_ARC_SECTOFF_1
3616 ENUMX
3617   BFD_RELOC_ARC_SECTOFF_2
3618 ENUMX
3619   BFD_RELOC_ARC_SDA16_ST2
3620 ENUMX
3621   BFD_RELOC_ARC_32_PCREL
3622 ENUMX
3623   BFD_RELOC_ARC_PC32
3624 ENUMX
3625   BFD_RELOC_ARC_GOT32
3626 ENUMX
3627   BFD_RELOC_ARC_GOTPC32
3628 ENUMX
3629   BFD_RELOC_ARC_PLT32
3630 ENUMX
3631   BFD_RELOC_ARC_COPY
3632 ENUMX
3633   BFD_RELOC_ARC_GLOB_DAT
3634 ENUMX
3635   BFD_RELOC_ARC_JMP_SLOT
3636 ENUMX
3637   BFD_RELOC_ARC_RELATIVE
3638 ENUMX
3639   BFD_RELOC_ARC_GOTOFF
3640 ENUMX
3641   BFD_RELOC_ARC_GOTPC
3642 ENUMX
3643   BFD_RELOC_ARC_S21W_PCREL_PLT
3644 ENUMX
3645   BFD_RELOC_ARC_S25H_PCREL_PLT
3646 ENUMX
3647   BFD_RELOC_ARC_TLS_DTPMOD
3648 ENUMX
3649   BFD_RELOC_ARC_TLS_TPOFF
3650 ENUMX
3651   BFD_RELOC_ARC_TLS_GD_GOT
3652 ENUMX
3653   BFD_RELOC_ARC_TLS_GD_LD
3654 ENUMX
3655   BFD_RELOC_ARC_TLS_GD_CALL
3656 ENUMX
3657   BFD_RELOC_ARC_TLS_IE_GOT
3658 ENUMX
3659   BFD_RELOC_ARC_TLS_DTPOFF
3660 ENUMX
3661   BFD_RELOC_ARC_TLS_DTPOFF_S9
3662 ENUMX
3663   BFD_RELOC_ARC_TLS_LE_S9
3664 ENUMX
3665   BFD_RELOC_ARC_TLS_LE_32
3666 ENUMX
3667   BFD_RELOC_ARC_S25W_PCREL_PLT
3668 ENUMX
3669   BFD_RELOC_ARC_S21H_PCREL_PLT
3670 ENUMDOC
3671   ARC relocs.
3672
3673 ENUM
3674   BFD_RELOC_BFIN_16_IMM
3675 ENUMDOC
3676   ADI Blackfin 16 bit immediate absolute reloc.
3677 ENUM
3678   BFD_RELOC_BFIN_16_HIGH
3679 ENUMDOC
3680   ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3681 ENUM
3682   BFD_RELOC_BFIN_4_PCREL
3683 ENUMDOC
3684   ADI Blackfin 'a' part of LSETUP.
3685 ENUM
3686   BFD_RELOC_BFIN_5_PCREL
3687 ENUMDOC
3688   ADI Blackfin.
3689 ENUM
3690   BFD_RELOC_BFIN_16_LOW
3691 ENUMDOC
3692   ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3693 ENUM
3694   BFD_RELOC_BFIN_10_PCREL
3695 ENUMDOC
3696   ADI Blackfin.
3697 ENUM
3698   BFD_RELOC_BFIN_11_PCREL
3699 ENUMDOC
3700   ADI Blackfin 'b' part of LSETUP.
3701 ENUM
3702   BFD_RELOC_BFIN_12_PCREL_JUMP
3703 ENUMDOC
3704   ADI Blackfin.
3705 ENUM
3706   BFD_RELOC_BFIN_12_PCREL_JUMP_S
3707 ENUMDOC
3708   ADI Blackfin Short jump, pcrel.
3709 ENUM
3710   BFD_RELOC_BFIN_24_PCREL_CALL_X
3711 ENUMDOC
3712   ADI Blackfin Call.x not implemented.
3713 ENUM
3714   BFD_RELOC_BFIN_24_PCREL_JUMP_L
3715 ENUMDOC
3716   ADI Blackfin Long Jump pcrel.
3717 ENUM
3718   BFD_RELOC_BFIN_GOT17M4
3719 ENUMX
3720   BFD_RELOC_BFIN_GOTHI
3721 ENUMX
3722   BFD_RELOC_BFIN_GOTLO
3723 ENUMX
3724   BFD_RELOC_BFIN_FUNCDESC
3725 ENUMX
3726   BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3727 ENUMX
3728   BFD_RELOC_BFIN_FUNCDESC_GOTHI
3729 ENUMX
3730   BFD_RELOC_BFIN_FUNCDESC_GOTLO
3731 ENUMX
3732   BFD_RELOC_BFIN_FUNCDESC_VALUE
3733 ENUMX
3734   BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3735 ENUMX
3736   BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3737 ENUMX
3738   BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3739 ENUMX
3740   BFD_RELOC_BFIN_GOTOFF17M4
3741 ENUMX
3742   BFD_RELOC_BFIN_GOTOFFHI
3743 ENUMX
3744   BFD_RELOC_BFIN_GOTOFFLO
3745 ENUMDOC
3746   ADI Blackfin FD-PIC relocations.
3747 ENUM
3748   BFD_RELOC_BFIN_GOT
3749 ENUMDOC
3750   ADI Blackfin GOT relocation.
3751 ENUM
3752   BFD_RELOC_BFIN_PLTPC
3753 ENUMDOC
3754   ADI Blackfin PLTPC relocation.
3755 ENUM
3756   BFD_ARELOC_BFIN_PUSH
3757 ENUMDOC
3758   ADI Blackfin arithmetic relocation.
3759 ENUM
3760   BFD_ARELOC_BFIN_CONST
3761 ENUMDOC
3762   ADI Blackfin arithmetic relocation.
3763 ENUM
3764   BFD_ARELOC_BFIN_ADD
3765 ENUMDOC
3766   ADI Blackfin arithmetic relocation.
3767 ENUM
3768   BFD_ARELOC_BFIN_SUB
3769 ENUMDOC
3770   ADI Blackfin arithmetic relocation.
3771 ENUM
3772   BFD_ARELOC_BFIN_MULT
3773 ENUMDOC
3774   ADI Blackfin arithmetic relocation.
3775 ENUM
3776   BFD_ARELOC_BFIN_DIV
3777 ENUMDOC
3778   ADI Blackfin arithmetic relocation.
3779 ENUM
3780   BFD_ARELOC_BFIN_MOD
3781 ENUMDOC
3782   ADI Blackfin arithmetic relocation.
3783 ENUM
3784   BFD_ARELOC_BFIN_LSHIFT
3785 ENUMDOC
3786   ADI Blackfin arithmetic relocation.
3787 ENUM
3788   BFD_ARELOC_BFIN_RSHIFT
3789 ENUMDOC
3790   ADI Blackfin arithmetic relocation.
3791 ENUM
3792   BFD_ARELOC_BFIN_AND
3793 ENUMDOC
3794   ADI Blackfin arithmetic relocation.
3795 ENUM
3796   BFD_ARELOC_BFIN_OR
3797 ENUMDOC
3798   ADI Blackfin arithmetic relocation.
3799 ENUM
3800   BFD_ARELOC_BFIN_XOR
3801 ENUMDOC
3802   ADI Blackfin arithmetic relocation.
3803 ENUM
3804   BFD_ARELOC_BFIN_LAND
3805 ENUMDOC
3806   ADI Blackfin arithmetic relocation.
3807 ENUM
3808   BFD_ARELOC_BFIN_LOR
3809 ENUMDOC
3810   ADI Blackfin arithmetic relocation.
3811 ENUM
3812   BFD_ARELOC_BFIN_LEN
3813 ENUMDOC
3814   ADI Blackfin arithmetic relocation.
3815 ENUM
3816   BFD_ARELOC_BFIN_NEG
3817 ENUMDOC
3818   ADI Blackfin arithmetic relocation.
3819 ENUM
3820   BFD_ARELOC_BFIN_COMP
3821 ENUMDOC
3822   ADI Blackfin arithmetic relocation.
3823 ENUM
3824   BFD_ARELOC_BFIN_PAGE
3825 ENUMDOC
3826   ADI Blackfin arithmetic relocation.
3827 ENUM
3828   BFD_ARELOC_BFIN_HWPAGE
3829 ENUMDOC
3830   ADI Blackfin arithmetic relocation.
3831 ENUM
3832   BFD_ARELOC_BFIN_ADDR
3833 ENUMDOC
3834   ADI Blackfin arithmetic relocation.
3835
3836 ENUM
3837   BFD_RELOC_D10V_10_PCREL_R
3838 ENUMDOC
3839   Mitsubishi D10V relocs.
3840   This is a 10-bit reloc with the right 2 bits
3841   assumed to be 0.
3842 ENUM
3843   BFD_RELOC_D10V_10_PCREL_L
3844 ENUMDOC
3845   Mitsubishi D10V relocs.
3846   This is a 10-bit reloc with the right 2 bits
3847   assumed to be 0.  This is the same as the previous reloc
3848   except it is in the left container, i.e.,
3849   shifted left 15 bits.
3850 ENUM
3851   BFD_RELOC_D10V_18
3852 ENUMDOC
3853   This is an 18-bit reloc with the right 2 bits
3854   assumed to be 0.
3855 ENUM
3856   BFD_RELOC_D10V_18_PCREL
3857 ENUMDOC
3858   This is an 18-bit reloc with the right 2 bits
3859   assumed to be 0.
3860
3861 ENUM
3862   BFD_RELOC_D30V_6
3863 ENUMDOC
3864   Mitsubishi D30V relocs.
3865   This is a 6-bit absolute reloc.
3866 ENUM
3867   BFD_RELOC_D30V_9_PCREL
3868 ENUMDOC
3869   This is a 6-bit pc-relative reloc with
3870   the right 3 bits assumed to be 0.
3871 ENUM
3872   BFD_RELOC_D30V_9_PCREL_R
3873 ENUMDOC
3874   This is a 6-bit pc-relative reloc with
3875   the right 3 bits assumed to be 0. Same
3876   as the previous reloc but on the right side
3877   of the container.
3878 ENUM
3879   BFD_RELOC_D30V_15
3880 ENUMDOC
3881   This is a 12-bit absolute reloc with the
3882   right 3 bitsassumed to be 0.
3883 ENUM
3884   BFD_RELOC_D30V_15_PCREL
3885 ENUMDOC
3886   This is a 12-bit pc-relative reloc with
3887   the right 3 bits assumed to be 0.
3888 ENUM
3889   BFD_RELOC_D30V_15_PCREL_R
3890 ENUMDOC
3891   This is a 12-bit pc-relative reloc with
3892   the right 3 bits assumed to be 0. Same
3893   as the previous reloc but on the right side
3894   of the container.
3895 ENUM
3896   BFD_RELOC_D30V_21
3897 ENUMDOC
3898   This is an 18-bit absolute reloc with
3899   the right 3 bits assumed to be 0.
3900 ENUM
3901   BFD_RELOC_D30V_21_PCREL
3902 ENUMDOC
3903   This is an 18-bit pc-relative reloc with
3904   the right 3 bits assumed to be 0.
3905 ENUM
3906   BFD_RELOC_D30V_21_PCREL_R
3907 ENUMDOC
3908   This is an 18-bit pc-relative reloc with
3909   the right 3 bits assumed to be 0. Same
3910   as the previous reloc but on the right side
3911   of the container.
3912 ENUM
3913   BFD_RELOC_D30V_32
3914 ENUMDOC
3915   This is a 32-bit absolute reloc.
3916 ENUM
3917   BFD_RELOC_D30V_32_PCREL
3918 ENUMDOC
3919   This is a 32-bit pc-relative reloc.
3920
3921 ENUM
3922   BFD_RELOC_DLX_HI16_S
3923 ENUMDOC
3924   DLX relocs
3925 ENUM
3926   BFD_RELOC_DLX_LO16
3927 ENUMDOC
3928   DLX relocs
3929 ENUM
3930   BFD_RELOC_DLX_JMP26
3931 ENUMDOC
3932   DLX relocs
3933
3934 ENUM
3935   BFD_RELOC_M32C_HI8
3936 ENUMX
3937   BFD_RELOC_M32C_RL_JUMP
3938 ENUMX
3939   BFD_RELOC_M32C_RL_1ADDR
3940 ENUMX
3941   BFD_RELOC_M32C_RL_2ADDR
3942 ENUMDOC
3943   Renesas M16C/M32C Relocations.
3944
3945 ENUM
3946   BFD_RELOC_M32R_24
3947 ENUMDOC
3948   Renesas M32R (formerly Mitsubishi M32R) relocs.
3949   This is a 24 bit absolute address.
3950 ENUM
3951   BFD_RELOC_M32R_10_PCREL
3952 ENUMDOC
3953   This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3954 ENUM
3955   BFD_RELOC_M32R_18_PCREL
3956 ENUMDOC
3957   This is an 18-bit reloc with the right 2 bits assumed to be 0.
3958 ENUM
3959   BFD_RELOC_M32R_26_PCREL
3960 ENUMDOC
3961   This is a 26-bit reloc with the right 2 bits assumed to be 0.
3962 ENUM
3963   BFD_RELOC_M32R_HI16_ULO
3964 ENUMDOC
3965   This is a 16-bit reloc containing the high 16 bits of an address
3966   used when the lower 16 bits are treated as unsigned.
3967 ENUM
3968   BFD_RELOC_M32R_HI16_SLO
3969 ENUMDOC
3970   This is a 16-bit reloc containing the high 16 bits of an address
3971   used when the lower 16 bits are treated as signed.
3972 ENUM
3973   BFD_RELOC_M32R_LO16
3974 ENUMDOC
3975   This is a 16-bit reloc containing the lower 16 bits of an address.
3976 ENUM
3977   BFD_RELOC_M32R_SDA16
3978 ENUMDOC
3979   This is a 16-bit reloc containing the small data area offset for use in
3980   add3, load, and store instructions.
3981 ENUM
3982   BFD_RELOC_M32R_GOT24
3983 ENUMX
3984   BFD_RELOC_M32R_26_PLTREL
3985 ENUMX
3986   BFD_RELOC_M32R_COPY
3987 ENUMX
3988   BFD_RELOC_M32R_GLOB_DAT
3989 ENUMX
3990   BFD_RELOC_M32R_JMP_SLOT
3991 ENUMX
3992   BFD_RELOC_M32R_RELATIVE
3993 ENUMX
3994   BFD_RELOC_M32R_GOTOFF
3995 ENUMX
3996   BFD_RELOC_M32R_GOTOFF_HI_ULO
3997 ENUMX
3998   BFD_RELOC_M32R_GOTOFF_HI_SLO
3999 ENUMX
4000   BFD_RELOC_M32R_GOTOFF_LO
4001 ENUMX
4002   BFD_RELOC_M32R_GOTPC24
4003 ENUMX
4004   BFD_RELOC_M32R_GOT16_HI_ULO
4005 ENUMX
4006   BFD_RELOC_M32R_GOT16_HI_SLO
4007 ENUMX
4008   BFD_RELOC_M32R_GOT16_LO
4009 ENUMX
4010   BFD_RELOC_M32R_GOTPC_HI_ULO
4011 ENUMX
4012   BFD_RELOC_M32R_GOTPC_HI_SLO
4013 ENUMX
4014   BFD_RELOC_M32R_GOTPC_LO
4015 ENUMDOC
4016   For PIC.
4017
4018
4019 ENUM
4020   BFD_RELOC_NDS32_20
4021 ENUMDOC
4022   NDS32 relocs.
4023   This is a 20 bit absolute address.
4024 ENUM
4025   BFD_RELOC_NDS32_9_PCREL
4026 ENUMDOC
4027   This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
4028 ENUM
4029   BFD_RELOC_NDS32_WORD_9_PCREL
4030 ENUMDOC
4031   This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
4032 ENUM
4033   BFD_RELOC_NDS32_15_PCREL
4034 ENUMDOC
4035   This is an 15-bit reloc with the right 1 bit assumed to be 0.
4036 ENUM
4037   BFD_RELOC_NDS32_17_PCREL
4038 ENUMDOC
4039   This is an 17-bit reloc with the right 1 bit assumed to be 0.
4040 ENUM
4041   BFD_RELOC_NDS32_25_PCREL
4042 ENUMDOC
4043   This is a 25-bit reloc with the right 1 bit assumed to be 0.
4044 ENUM
4045   BFD_RELOC_NDS32_HI20
4046 ENUMDOC
4047   This is a 20-bit reloc containing the high 20 bits of an address
4048   used with the lower 12 bits
4049 ENUM
4050   BFD_RELOC_NDS32_LO12S3
4051 ENUMDOC
4052   This is a 12-bit reloc containing the lower 12 bits of an address
4053   then shift right by 3. This is used with ldi,sdi...
4054 ENUM
4055   BFD_RELOC_NDS32_LO12S2
4056 ENUMDOC
4057   This is a 12-bit reloc containing the lower 12 bits of an address
4058   then shift left by 2. This is used with lwi,swi...
4059 ENUM
4060   BFD_RELOC_NDS32_LO12S1
4061 ENUMDOC
4062   This is a 12-bit reloc containing the lower 12 bits of an address
4063   then shift left by 1. This is used with lhi,shi...
4064 ENUM
4065   BFD_RELOC_NDS32_LO12S0
4066 ENUMDOC
4067   This is a 12-bit reloc containing the lower 12 bits of an address
4068   then shift left by 0. This is used with lbisbi...
4069 ENUM
4070   BFD_RELOC_NDS32_LO12S0_ORI
4071 ENUMDOC
4072   This is a 12-bit reloc containing the lower 12 bits of an address
4073   then shift left by 0. This is only used with branch relaxations
4074 ENUM
4075   BFD_RELOC_NDS32_SDA15S3
4076 ENUMDOC
4077   This is a 15-bit reloc containing the small data area 18-bit signed offset
4078   and shift left by 3 for use in ldi, sdi...
4079 ENUM
4080   BFD_RELOC_NDS32_SDA15S2
4081 ENUMDOC
4082   This is a 15-bit reloc containing the small data area 17-bit signed offset
4083   and shift left by 2 for use in lwi, swi...
4084 ENUM
4085   BFD_RELOC_NDS32_SDA15S1
4086 ENUMDOC
4087   This is a 15-bit reloc containing the small data area 16-bit signed offset
4088   and shift left by 1 for use in lhi, shi...
4089 ENUM
4090   BFD_RELOC_NDS32_SDA15S0
4091 ENUMDOC
4092   This is a 15-bit reloc containing the small data area 15-bit signed offset
4093   and shift left by 0 for use in lbi, sbi...
4094 ENUM
4095   BFD_RELOC_NDS32_SDA16S3
4096 ENUMDOC
4097   This is a 16-bit reloc containing the small data area 16-bit signed offset
4098   and shift left by 3
4099 ENUM
4100   BFD_RELOC_NDS32_SDA17S2
4101 ENUMDOC
4102   This is a 17-bit reloc containing the small data area 17-bit signed offset
4103   and shift left by 2 for use in lwi.gp, swi.gp...
4104 ENUM
4105   BFD_RELOC_NDS32_SDA18S1
4106 ENUMDOC
4107   This is a 18-bit reloc containing the small data area 18-bit signed offset
4108   and shift left by 1 for use in lhi.gp, shi.gp...
4109 ENUM
4110   BFD_RELOC_NDS32_SDA19S0
4111 ENUMDOC
4112   This is a 19-bit reloc containing the small data area 19-bit signed offset
4113   and shift left by 0 for use in lbi.gp, sbi.gp...
4114 ENUM
4115   BFD_RELOC_NDS32_GOT20
4116 ENUMX
4117   BFD_RELOC_NDS32_9_PLTREL
4118 ENUMX
4119   BFD_RELOC_NDS32_25_PLTREL
4120 ENUMX
4121   BFD_RELOC_NDS32_COPY
4122 ENUMX
4123   BFD_RELOC_NDS32_GLOB_DAT
4124 ENUMX
4125   BFD_RELOC_NDS32_JMP_SLOT
4126 ENUMX
4127   BFD_RELOC_NDS32_RELATIVE
4128 ENUMX
4129   BFD_RELOC_NDS32_GOTOFF
4130 ENUMX
4131   BFD_RELOC_NDS32_GOTOFF_HI20
4132 ENUMX
4133   BFD_RELOC_NDS32_GOTOFF_LO12
4134 ENUMX
4135   BFD_RELOC_NDS32_GOTPC20
4136 ENUMX
4137   BFD_RELOC_NDS32_GOT_HI20
4138 ENUMX
4139   BFD_RELOC_NDS32_GOT_LO12
4140 ENUMX
4141   BFD_RELOC_NDS32_GOTPC_HI20
4142 ENUMX
4143   BFD_RELOC_NDS32_GOTPC_LO12
4144 ENUMDOC
4145   for PIC
4146 ENUM
4147   BFD_RELOC_NDS32_INSN16
4148 ENUMX
4149   BFD_RELOC_NDS32_LABEL
4150 ENUMX
4151   BFD_RELOC_NDS32_LONGCALL1
4152 ENUMX
4153   BFD_RELOC_NDS32_LONGCALL2
4154 ENUMX
4155   BFD_RELOC_NDS32_LONGCALL3
4156 ENUMX
4157   BFD_RELOC_NDS32_LONGJUMP1
4158 ENUMX
4159   BFD_RELOC_NDS32_LONGJUMP2
4160 ENUMX
4161   BFD_RELOC_NDS32_LONGJUMP3
4162 ENUMX
4163   BFD_RELOC_NDS32_LOADSTORE
4164 ENUMX
4165   BFD_RELOC_NDS32_9_FIXED
4166 ENUMX
4167   BFD_RELOC_NDS32_15_FIXED
4168 ENUMX
4169   BFD_RELOC_NDS32_17_FIXED
4170 ENUMX
4171   BFD_RELOC_NDS32_25_FIXED
4172 ENUMX
4173   BFD_RELOC_NDS32_LONGCALL4
4174 ENUMX
4175   BFD_RELOC_NDS32_LONGCALL5
4176 ENUMX
4177   BFD_RELOC_NDS32_LONGCALL6
4178 ENUMX
4179   BFD_RELOC_NDS32_LONGJUMP4
4180 ENUMX
4181   BFD_RELOC_NDS32_LONGJUMP5
4182 ENUMX
4183   BFD_RELOC_NDS32_LONGJUMP6
4184 ENUMX
4185   BFD_RELOC_NDS32_LONGJUMP7
4186 ENUMDOC
4187   for relax
4188 ENUM
4189   BFD_RELOC_NDS32_PLTREL_HI20
4190 ENUMX
4191   BFD_RELOC_NDS32_PLTREL_LO12
4192 ENUMX
4193   BFD_RELOC_NDS32_PLT_GOTREL_HI20
4194 ENUMX
4195   BFD_RELOC_NDS32_PLT_GOTREL_LO12
4196 ENUMDOC
4197   for PIC
4198 ENUM
4199   BFD_RELOC_NDS32_SDA12S2_DP
4200 ENUMX
4201   BFD_RELOC_NDS32_SDA12S2_SP
4202 ENUMX
4203   BFD_RELOC_NDS32_LO12S2_DP
4204 ENUMX
4205   BFD_RELOC_NDS32_LO12S2_SP
4206 ENUMDOC
4207   for floating point
4208 ENUM
4209   BFD_RELOC_NDS32_DWARF2_OP1
4210 ENUMX
4211   BFD_RELOC_NDS32_DWARF2_OP2
4212 ENUMX
4213   BFD_RELOC_NDS32_DWARF2_LEB
4214 ENUMDOC
4215   for dwarf2 debug_line.
4216 ENUM
4217   BFD_RELOC_NDS32_UPDATE_TA
4218 ENUMDOC
4219   for eliminate 16-bit instructions
4220 ENUM
4221   BFD_RELOC_NDS32_PLT_GOTREL_LO20
4222 ENUMX
4223   BFD_RELOC_NDS32_PLT_GOTREL_LO15
4224 ENUMX
4225   BFD_RELOC_NDS32_PLT_GOTREL_LO19
4226 ENUMX
4227   BFD_RELOC_NDS32_GOT_LO15
4228 ENUMX
4229   BFD_RELOC_NDS32_GOT_LO19
4230 ENUMX
4231   BFD_RELOC_NDS32_GOTOFF_LO15
4232 ENUMX
4233   BFD_RELOC_NDS32_GOTOFF_LO19
4234 ENUMX
4235   BFD_RELOC_NDS32_GOT15S2
4236 ENUMX
4237   BFD_RELOC_NDS32_GOT17S2
4238 ENUMDOC
4239   for PIC object relaxation
4240 ENUM
4241   BFD_RELOC_NDS32_5
4242 ENUMDOC
4243   NDS32 relocs.
4244   This is a 5 bit absolute address.
4245 ENUM
4246   BFD_RELOC_NDS32_10_UPCREL
4247 ENUMDOC
4248   This is a 10-bit unsigned pc-relative reloc with the right 1 bit assumed to be 0.
4249 ENUM
4250   BFD_RELOC_NDS32_SDA_FP7U2_RELA
4251 ENUMDOC
4252   If fp were omitted, fp can used as another gp.
4253 ENUM
4254   BFD_RELOC_NDS32_RELAX_ENTRY
4255 ENUMX
4256   BFD_RELOC_NDS32_GOT_SUFF
4257 ENUMX
4258   BFD_RELOC_NDS32_GOTOFF_SUFF
4259 ENUMX
4260   BFD_RELOC_NDS32_PLT_GOT_SUFF
4261 ENUMX
4262   BFD_RELOC_NDS32_MULCALL_SUFF
4263 ENUMX
4264   BFD_RELOC_NDS32_PTR
4265 ENUMX
4266   BFD_RELOC_NDS32_PTR_COUNT
4267 ENUMX
4268   BFD_RELOC_NDS32_PTR_RESOLVED
4269 ENUMX
4270   BFD_RELOC_NDS32_PLTBLOCK
4271 ENUMX
4272   BFD_RELOC_NDS32_RELAX_REGION_BEGIN
4273 ENUMX
4274   BFD_RELOC_NDS32_RELAX_REGION_END
4275 ENUMX
4276   BFD_RELOC_NDS32_MINUEND
4277 ENUMX
4278   BFD_RELOC_NDS32_SUBTRAHEND
4279 ENUMX
4280   BFD_RELOC_NDS32_DIFF8
4281 ENUMX
4282   BFD_RELOC_NDS32_DIFF16
4283 ENUMX
4284   BFD_RELOC_NDS32_DIFF32
4285 ENUMX
4286   BFD_RELOC_NDS32_DIFF_ULEB128
4287 ENUMX
4288   BFD_RELOC_NDS32_EMPTY
4289 ENUMDOC
4290   relaxation relative relocation types
4291 ENUM
4292   BFD_RELOC_NDS32_25_ABS
4293 ENUMDOC
4294   This is a 25 bit absolute address.
4295 ENUM
4296   BFD_RELOC_NDS32_DATA
4297 ENUMX
4298   BFD_RELOC_NDS32_TRAN
4299 ENUMX
4300   BFD_RELOC_NDS32_17IFC_PCREL
4301 ENUMX
4302   BFD_RELOC_NDS32_10IFCU_PCREL
4303 ENUMDOC
4304   For ex9 and ifc using.
4305 ENUM
4306   BFD_RELOC_NDS32_TPOFF
4307 ENUMX
4308   BFD_RELOC_NDS32_TLS_LE_HI20
4309 ENUMX
4310   BFD_RELOC_NDS32_TLS_LE_LO12
4311 ENUMX
4312   BFD_RELOC_NDS32_TLS_LE_ADD
4313 ENUMX
4314   BFD_RELOC_NDS32_TLS_LE_LS
4315 ENUMX
4316   BFD_RELOC_NDS32_GOTTPOFF
4317 ENUMX
4318   BFD_RELOC_NDS32_TLS_IE_HI20
4319 ENUMX
4320   BFD_RELOC_NDS32_TLS_IE_LO12S2
4321 ENUMX
4322   BFD_RELOC_NDS32_TLS_TPOFF
4323 ENUMX
4324   BFD_RELOC_NDS32_TLS_LE_20
4325 ENUMX
4326   BFD_RELOC_NDS32_TLS_LE_15S0
4327 ENUMX
4328   BFD_RELOC_NDS32_TLS_LE_15S1
4329 ENUMX
4330   BFD_RELOC_NDS32_TLS_LE_15S2
4331 ENUMDOC
4332   For TLS.
4333
4334
4335 ENUM
4336   BFD_RELOC_V850_9_PCREL
4337 ENUMDOC
4338   This is a 9-bit reloc
4339 ENUM
4340   BFD_RELOC_V850_22_PCREL
4341 ENUMDOC
4342   This is a 22-bit reloc
4343
4344 ENUM
4345   BFD_RELOC_V850_SDA_16_16_OFFSET
4346 ENUMDOC
4347   This is a 16 bit offset from the short data area pointer.
4348 ENUM
4349   BFD_RELOC_V850_SDA_15_16_OFFSET
4350 ENUMDOC
4351   This is a 16 bit offset (of which only 15 bits are used) from the
4352   short data area pointer.
4353 ENUM
4354   BFD_RELOC_V850_ZDA_16_16_OFFSET
4355 ENUMDOC
4356   This is a 16 bit offset from the zero data area pointer.
4357 ENUM
4358   BFD_RELOC_V850_ZDA_15_16_OFFSET
4359 ENUMDOC
4360   This is a 16 bit offset (of which only 15 bits are used) from the
4361   zero data area pointer.
4362 ENUM
4363   BFD_RELOC_V850_TDA_6_8_OFFSET
4364 ENUMDOC
4365   This is an 8 bit offset (of which only 6 bits are used) from the
4366   tiny data area pointer.
4367 ENUM
4368   BFD_RELOC_V850_TDA_7_8_OFFSET
4369 ENUMDOC
4370   This is an 8bit offset (of which only 7 bits are used) from the tiny
4371   data area pointer.
4372 ENUM
4373   BFD_RELOC_V850_TDA_7_7_OFFSET
4374 ENUMDOC
4375   This is a 7 bit offset from the tiny data area pointer.
4376 ENUM
4377   BFD_RELOC_V850_TDA_16_16_OFFSET
4378 ENUMDOC
4379   This is a 16 bit offset from the tiny data area pointer.
4380 COMMENT
4381 ENUM
4382   BFD_RELOC_V850_TDA_4_5_OFFSET
4383 ENUMDOC
4384   This is a 5 bit offset (of which only 4 bits are used) from the tiny
4385   data area pointer.
4386 ENUM
4387   BFD_RELOC_V850_TDA_4_4_OFFSET
4388 ENUMDOC
4389   This is a 4 bit offset from the tiny data area pointer.
4390 ENUM
4391   BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
4392 ENUMDOC
4393   This is a 16 bit offset from the short data area pointer, with the
4394   bits placed non-contiguously in the instruction.
4395 ENUM
4396   BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
4397 ENUMDOC
4398   This is a 16 bit offset from the zero data area pointer, with the
4399   bits placed non-contiguously in the instruction.
4400 ENUM
4401   BFD_RELOC_V850_CALLT_6_7_OFFSET
4402 ENUMDOC
4403   This is a 6 bit offset from the call table base pointer.
4404 ENUM
4405   BFD_RELOC_V850_CALLT_16_16_OFFSET
4406 ENUMDOC
4407   This is a 16 bit offset from the call table base pointer.
4408 ENUM
4409   BFD_RELOC_V850_LONGCALL
4410 ENUMDOC
4411   Used for relaxing indirect function calls.
4412 ENUM
4413   BFD_RELOC_V850_LONGJUMP
4414 ENUMDOC
4415   Used for relaxing indirect jumps.
4416 ENUM
4417   BFD_RELOC_V850_ALIGN
4418 ENUMDOC
4419   Used to maintain alignment whilst relaxing.
4420 ENUM
4421   BFD_RELOC_V850_LO16_SPLIT_OFFSET
4422 ENUMDOC
4423   This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
4424   instructions.
4425 ENUM
4426   BFD_RELOC_V850_16_PCREL
4427 ENUMDOC
4428   This is a 16-bit reloc.
4429 ENUM
4430   BFD_RELOC_V850_17_PCREL
4431 ENUMDOC
4432   This is a 17-bit reloc.
4433 ENUM
4434   BFD_RELOC_V850_23
4435 ENUMDOC
4436   This is a 23-bit reloc.
4437 ENUM
4438   BFD_RELOC_V850_32_PCREL
4439 ENUMDOC
4440   This is a 32-bit reloc.
4441 ENUM
4442   BFD_RELOC_V850_32_ABS
4443 ENUMDOC
4444   This is a 32-bit reloc.
4445 ENUM
4446   BFD_RELOC_V850_16_SPLIT_OFFSET
4447 ENUMDOC
4448   This is a 16-bit reloc.
4449 ENUM
4450   BFD_RELOC_V850_16_S1
4451 ENUMDOC
4452   This is a 16-bit reloc.
4453 ENUM
4454   BFD_RELOC_V850_LO16_S1
4455 ENUMDOC
4456   Low 16 bits. 16 bit shifted by 1.
4457 ENUM
4458   BFD_RELOC_V850_CALLT_15_16_OFFSET
4459 ENUMDOC
4460   This is a 16 bit offset from the call table base pointer.
4461 ENUM
4462   BFD_RELOC_V850_32_GOTPCREL
4463 ENUMDOC
4464   DSO relocations.
4465 ENUM
4466   BFD_RELOC_V850_16_GOT
4467 ENUMDOC
4468   DSO relocations.
4469 ENUM
4470   BFD_RELOC_V850_32_GOT
4471 ENUMDOC
4472   DSO relocations.
4473 ENUM
4474   BFD_RELOC_V850_22_PLT_PCREL
4475 ENUMDOC
4476   DSO relocations.
4477 ENUM
4478   BFD_RELOC_V850_32_PLT_PCREL
4479 ENUMDOC
4480   DSO relocations.
4481 ENUM
4482   BFD_RELOC_V850_COPY
4483 ENUMDOC
4484   DSO relocations.
4485 ENUM
4486   BFD_RELOC_V850_GLOB_DAT
4487 ENUMDOC
4488   DSO relocations.
4489 ENUM
4490   BFD_RELOC_V850_JMP_SLOT
4491 ENUMDOC
4492   DSO relocations.
4493 ENUM
4494   BFD_RELOC_V850_RELATIVE
4495 ENUMDOC
4496   DSO relocations.
4497 ENUM
4498   BFD_RELOC_V850_16_GOTOFF
4499 ENUMDOC
4500   DSO relocations.
4501 ENUM
4502   BFD_RELOC_V850_32_GOTOFF
4503 ENUMDOC
4504   DSO relocations.
4505 ENUM
4506   BFD_RELOC_V850_CODE
4507 ENUMDOC
4508   start code.
4509 ENUM
4510   BFD_RELOC_V850_DATA
4511 ENUMDOC
4512   start data in text.
4513
4514 ENUM
4515   BFD_RELOC_TIC30_LDP
4516 ENUMDOC
4517   This is a 8bit DP reloc for the tms320c30, where the most
4518   significant 8 bits of a 24 bit word are placed into the least
4519   significant 8 bits of the opcode.
4520
4521 ENUM
4522   BFD_RELOC_TIC54X_PARTLS7
4523 ENUMDOC
4524   This is a 7bit reloc for the tms320c54x, where the least
4525   significant 7 bits of a 16 bit word are placed into the least
4526   significant 7 bits of the opcode.
4527
4528 ENUM
4529   BFD_RELOC_TIC54X_PARTMS9
4530 ENUMDOC
4531   This is a 9bit DP reloc for the tms320c54x, where the most
4532   significant 9 bits of a 16 bit word are placed into the least
4533   significant 9 bits of the opcode.
4534
4535 ENUM
4536   BFD_RELOC_TIC54X_23
4537 ENUMDOC
4538   This is an extended address 23-bit reloc for the tms320c54x.
4539
4540 ENUM
4541   BFD_RELOC_TIC54X_16_OF_23
4542 ENUMDOC
4543   This is a 16-bit reloc for the tms320c54x, where the least
4544   significant 16 bits of a 23-bit extended address are placed into
4545   the opcode.
4546
4547 ENUM
4548   BFD_RELOC_TIC54X_MS7_OF_23
4549 ENUMDOC
4550   This is a reloc for the tms320c54x, where the most
4551   significant 7 bits of a 23-bit extended address are placed into
4552   the opcode.
4553
4554 ENUM
4555   BFD_RELOC_C6000_PCR_S21
4556 ENUMX
4557   BFD_RELOC_C6000_PCR_S12
4558 ENUMX
4559   BFD_RELOC_C6000_PCR_S10
4560 ENUMX
4561   BFD_RELOC_C6000_PCR_S7
4562 ENUMX
4563   BFD_RELOC_C6000_ABS_S16
4564 ENUMX
4565   BFD_RELOC_C6000_ABS_L16
4566 ENUMX
4567   BFD_RELOC_C6000_ABS_H16
4568 ENUMX
4569   BFD_RELOC_C6000_SBR_U15_B
4570 ENUMX
4571   BFD_RELOC_C6000_SBR_U15_H
4572 ENUMX
4573   BFD_RELOC_C6000_SBR_U15_W
4574 ENUMX
4575   BFD_RELOC_C6000_SBR_S16
4576 ENUMX
4577   BFD_RELOC_C6000_SBR_L16_B
4578 ENUMX
4579   BFD_RELOC_C6000_SBR_L16_H
4580 ENUMX
4581   BFD_RELOC_C6000_SBR_L16_W
4582 ENUMX
4583   BFD_RELOC_C6000_SBR_H16_B
4584 ENUMX
4585   BFD_RELOC_C6000_SBR_H16_H
4586 ENUMX
4587   BFD_RELOC_C6000_SBR_H16_W
4588 ENUMX
4589   BFD_RELOC_C6000_SBR_GOT_U15_W
4590 ENUMX
4591   BFD_RELOC_C6000_SBR_GOT_L16_W
4592 ENUMX
4593   BFD_RELOC_C6000_SBR_GOT_H16_W
4594 ENUMX
4595   BFD_RELOC_C6000_DSBT_INDEX
4596 ENUMX
4597   BFD_RELOC_C6000_PREL31
4598 ENUMX
4599   BFD_RELOC_C6000_COPY
4600 ENUMX
4601   BFD_RELOC_C6000_JUMP_SLOT
4602 ENUMX
4603   BFD_RELOC_C6000_EHTYPE
4604 ENUMX
4605   BFD_RELOC_C6000_PCR_H16
4606 ENUMX
4607   BFD_RELOC_C6000_PCR_L16
4608 ENUMX
4609   BFD_RELOC_C6000_ALIGN
4610 ENUMX
4611   BFD_RELOC_C6000_FPHEAD
4612 ENUMX
4613   BFD_RELOC_C6000_NOCMP
4614 ENUMDOC
4615   TMS320C6000 relocations.
4616
4617 ENUM
4618   BFD_RELOC_FR30_48
4619 ENUMDOC
4620   This is a 48 bit reloc for the FR30 that stores 32 bits.
4621 ENUM
4622   BFD_RELOC_FR30_20
4623 ENUMDOC
4624   This is a 32 bit reloc for the FR30 that stores 20 bits split up into
4625   two sections.
4626 ENUM
4627   BFD_RELOC_FR30_6_IN_4
4628 ENUMDOC
4629   This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
4630   4 bits.
4631 ENUM
4632   BFD_RELOC_FR30_8_IN_8
4633 ENUMDOC
4634   This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
4635   into 8 bits.
4636 ENUM
4637   BFD_RELOC_FR30_9_IN_8
4638 ENUMDOC
4639   This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
4640   into 8 bits.
4641 ENUM
4642   BFD_RELOC_FR30_10_IN_8
4643 ENUMDOC
4644   This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
4645   into 8 bits.
4646 ENUM
4647   BFD_RELOC_FR30_9_PCREL
4648 ENUMDOC
4649   This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
4650   short offset into 8 bits.
4651 ENUM
4652   BFD_RELOC_FR30_12_PCREL
4653 ENUMDOC
4654   This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
4655   short offset into 11 bits.
4656
4657 ENUM
4658   BFD_RELOC_MCORE_PCREL_IMM8BY4
4659 ENUMX
4660   BFD_RELOC_MCORE_PCREL_IMM11BY2
4661 ENUMX
4662   BFD_RELOC_MCORE_PCREL_IMM4BY2
4663 ENUMX
4664   BFD_RELOC_MCORE_PCREL_32
4665 ENUMX
4666   BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
4667 ENUMX
4668   BFD_RELOC_MCORE_RVA
4669 ENUMDOC
4670   Motorola Mcore relocations.
4671
4672 ENUM
4673   BFD_RELOC_MEP_8
4674 ENUMX
4675   BFD_RELOC_MEP_16
4676 ENUMX
4677   BFD_RELOC_MEP_32
4678 ENUMX
4679   BFD_RELOC_MEP_PCREL8A2
4680 ENUMX
4681   BFD_RELOC_MEP_PCREL12A2
4682 ENUMX
4683   BFD_RELOC_MEP_PCREL17A2
4684 ENUMX
4685   BFD_RELOC_MEP_PCREL24A2
4686 ENUMX
4687   BFD_RELOC_MEP_PCABS24A2
4688 ENUMX
4689   BFD_RELOC_MEP_LOW16
4690 ENUMX
4691   BFD_RELOC_MEP_HI16U
4692 ENUMX
4693   BFD_RELOC_MEP_HI16S
4694 ENUMX
4695   BFD_RELOC_MEP_GPREL
4696 ENUMX
4697   BFD_RELOC_MEP_TPREL
4698 ENUMX
4699   BFD_RELOC_MEP_TPREL7
4700 ENUMX
4701   BFD_RELOC_MEP_TPREL7A2
4702 ENUMX
4703   BFD_RELOC_MEP_TPREL7A4
4704 ENUMX
4705   BFD_RELOC_MEP_UIMM24
4706 ENUMX
4707   BFD_RELOC_MEP_ADDR24A4
4708 ENUMX
4709   BFD_RELOC_MEP_GNU_VTINHERIT
4710 ENUMX
4711   BFD_RELOC_MEP_GNU_VTENTRY
4712 ENUMDOC
4713   Toshiba Media Processor Relocations.
4714 COMMENT
4715
4716 ENUM
4717   BFD_RELOC_METAG_HIADDR16
4718 ENUMX
4719   BFD_RELOC_METAG_LOADDR16
4720 ENUMX
4721   BFD_RELOC_METAG_RELBRANCH
4722 ENUMX
4723   BFD_RELOC_METAG_GETSETOFF
4724 ENUMX
4725   BFD_RELOC_METAG_HIOG
4726 ENUMX
4727   BFD_RELOC_METAG_LOOG
4728 ENUMX
4729   BFD_RELOC_METAG_REL8
4730 ENUMX
4731   BFD_RELOC_METAG_REL16
4732 ENUMX
4733   BFD_RELOC_METAG_HI16_GOTOFF
4734 ENUMX
4735   BFD_RELOC_METAG_LO16_GOTOFF
4736 ENUMX
4737   BFD_RELOC_METAG_GETSET_GOTOFF
4738 ENUMX
4739   BFD_RELOC_METAG_GETSET_GOT
4740 ENUMX
4741   BFD_RELOC_METAG_HI16_GOTPC
4742 ENUMX
4743   BFD_RELOC_METAG_LO16_GOTPC
4744 ENUMX
4745   BFD_RELOC_METAG_HI16_PLT
4746 ENUMX
4747   BFD_RELOC_METAG_LO16_PLT
4748 ENUMX
4749   BFD_RELOC_METAG_RELBRANCH_PLT
4750 ENUMX
4751   BFD_RELOC_METAG_GOTOFF
4752 ENUMX
4753   BFD_RELOC_METAG_PLT
4754 ENUMX
4755   BFD_RELOC_METAG_COPY
4756 ENUMX
4757   BFD_RELOC_METAG_JMP_SLOT
4758 ENUMX
4759   BFD_RELOC_METAG_RELATIVE
4760 ENUMX
4761   BFD_RELOC_METAG_GLOB_DAT
4762 ENUMX
4763   BFD_RELOC_METAG_TLS_GD
4764 ENUMX
4765   BFD_RELOC_METAG_TLS_LDM
4766 ENUMX
4767   BFD_RELOC_METAG_TLS_LDO_HI16
4768 ENUMX
4769   BFD_RELOC_METAG_TLS_LDO_LO16
4770 ENUMX
4771   BFD_RELOC_METAG_TLS_LDO
4772 ENUMX
4773   BFD_RELOC_METAG_TLS_IE
4774 ENUMX
4775   BFD_RELOC_METAG_TLS_IENONPIC
4776 ENUMX
4777   BFD_RELOC_METAG_TLS_IENONPIC_HI16
4778 ENUMX
4779   BFD_RELOC_METAG_TLS_IENONPIC_LO16
4780 ENUMX
4781   BFD_RELOC_METAG_TLS_TPOFF
4782 ENUMX
4783   BFD_RELOC_METAG_TLS_DTPMOD
4784 ENUMX
4785   BFD_RELOC_METAG_TLS_DTPOFF
4786 ENUMX
4787   BFD_RELOC_METAG_TLS_LE
4788 ENUMX
4789   BFD_RELOC_METAG_TLS_LE_HI16
4790 ENUMX
4791   BFD_RELOC_METAG_TLS_LE_LO16
4792 ENUMDOC
4793   Imagination Technologies Meta relocations.
4794
4795 ENUM
4796   BFD_RELOC_MMIX_GETA
4797 ENUMX
4798   BFD_RELOC_MMIX_GETA_1
4799 ENUMX
4800   BFD_RELOC_MMIX_GETA_2
4801 ENUMX
4802   BFD_RELOC_MMIX_GETA_3
4803 ENUMDOC
4804   These are relocations for the GETA instruction.
4805 ENUM
4806   BFD_RELOC_MMIX_CBRANCH
4807 ENUMX
4808   BFD_RELOC_MMIX_CBRANCH_J
4809 ENUMX
4810   BFD_RELOC_MMIX_CBRANCH_1
4811 ENUMX
4812   BFD_RELOC_MMIX_CBRANCH_2
4813 ENUMX
4814   BFD_RELOC_MMIX_CBRANCH_3
4815 ENUMDOC
4816   These are relocations for a conditional branch instruction.
4817 ENUM
4818   BFD_RELOC_MMIX_PUSHJ
4819 ENUMX
4820   BFD_RELOC_MMIX_PUSHJ_1
4821 ENUMX
4822   BFD_RELOC_MMIX_PUSHJ_2
4823 ENUMX
4824   BFD_RELOC_MMIX_PUSHJ_3
4825 ENUMX
4826   BFD_RELOC_MMIX_PUSHJ_STUBBABLE
4827 ENUMDOC
4828   These are relocations for the PUSHJ instruction.
4829 ENUM
4830   BFD_RELOC_MMIX_JMP
4831 ENUMX
4832   BFD_RELOC_MMIX_JMP_1
4833 ENUMX
4834   BFD_RELOC_MMIX_JMP_2
4835 ENUMX
4836   BFD_RELOC_MMIX_JMP_3
4837 ENUMDOC
4838   These are relocations for the JMP instruction.
4839 ENUM
4840   BFD_RELOC_MMIX_ADDR19
4841 ENUMDOC
4842   This is a relocation for a relative address as in a GETA instruction or
4843   a branch.
4844 ENUM
4845   BFD_RELOC_MMIX_ADDR27
4846 ENUMDOC
4847   This is a relocation for a relative address as in a JMP instruction.
4848 ENUM
4849   BFD_RELOC_MMIX_REG_OR_BYTE
4850 ENUMDOC
4851   This is a relocation for an instruction field that may be a general
4852   register or a value 0..255.
4853 ENUM
4854   BFD_RELOC_MMIX_REG
4855 ENUMDOC
4856   This is a relocation for an instruction field that may be a general
4857   register.
4858 ENUM
4859   BFD_RELOC_MMIX_BASE_PLUS_OFFSET
4860 ENUMDOC
4861   This is a relocation for two instruction fields holding a register and
4862   an offset, the equivalent of the relocation.
4863 ENUM
4864   BFD_RELOC_MMIX_LOCAL
4865 ENUMDOC
4866   This relocation is an assertion that the expression is not allocated as
4867   a global register.  It does not modify contents.
4868
4869 ENUM
4870   BFD_RELOC_AVR_7_PCREL
4871 ENUMDOC
4872   This is a 16 bit reloc for the AVR that stores 8 bit pc relative
4873   short offset into 7 bits.
4874 ENUM
4875   BFD_RELOC_AVR_13_PCREL
4876 ENUMDOC
4877   This is a 16 bit reloc for the AVR that stores 13 bit pc relative
4878   short offset into 12 bits.
4879 ENUM
4880   BFD_RELOC_AVR_16_PM
4881 ENUMDOC
4882   This is a 16 bit reloc for the AVR that stores 17 bit value (usually
4883   program memory address) into 16 bits.
4884 ENUM
4885   BFD_RELOC_AVR_LO8_LDI
4886 ENUMDOC
4887   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4888   data memory address) into 8 bit immediate value of LDI insn.
4889 ENUM
4890   BFD_RELOC_AVR_HI8_LDI
4891 ENUMDOC
4892   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4893   of data memory address) into 8 bit immediate value of LDI insn.
4894 ENUM
4895   BFD_RELOC_AVR_HH8_LDI
4896 ENUMDOC
4897   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4898   of program memory address) into 8 bit immediate value of LDI insn.
4899 ENUM
4900   BFD_RELOC_AVR_MS8_LDI
4901 ENUMDOC
4902   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4903   of 32 bit value) into 8 bit immediate value of LDI insn.
4904 ENUM
4905   BFD_RELOC_AVR_LO8_LDI_NEG
4906 ENUMDOC
4907   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4908   (usually data memory address) into 8 bit immediate value of SUBI insn.
4909 ENUM
4910   BFD_RELOC_AVR_HI8_LDI_NEG
4911 ENUMDOC
4912   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4913   (high 8 bit of data memory address) into 8 bit immediate value of
4914   SUBI insn.
4915 ENUM
4916   BFD_RELOC_AVR_HH8_LDI_NEG
4917 ENUMDOC
4918   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4919   (most high 8 bit of program memory address) into 8 bit immediate value
4920   of LDI or SUBI insn.
4921 ENUM
4922   BFD_RELOC_AVR_MS8_LDI_NEG
4923 ENUMDOC
4924   This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
4925   of 32 bit value) into 8 bit immediate value of LDI insn.
4926 ENUM
4927   BFD_RELOC_AVR_LO8_LDI_PM
4928 ENUMDOC
4929   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4930   command address) into 8 bit immediate value of LDI insn.
4931 ENUM
4932   BFD_RELOC_AVR_LO8_LDI_GS
4933 ENUMDOC
4934   This is a 16 bit reloc for the AVR that stores 8 bit value
4935   (command address) into 8 bit immediate value of LDI insn. If the address
4936   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4937   in the lower 128k.
4938 ENUM
4939   BFD_RELOC_AVR_HI8_LDI_PM
4940 ENUMDOC
4941   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4942   of command address) into 8 bit immediate value of LDI insn.
4943 ENUM
4944   BFD_RELOC_AVR_HI8_LDI_GS
4945 ENUMDOC
4946   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4947   of command address) into 8 bit immediate value of LDI insn.  If the address
4948   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4949   below 128k.
4950 ENUM
4951   BFD_RELOC_AVR_HH8_LDI_PM
4952 ENUMDOC
4953   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4954   of command address) into 8 bit immediate value of LDI insn.
4955 ENUM
4956   BFD_RELOC_AVR_LO8_LDI_PM_NEG
4957 ENUMDOC
4958   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4959   (usually command address) into 8 bit immediate value of SUBI insn.
4960 ENUM
4961   BFD_RELOC_AVR_HI8_LDI_PM_NEG
4962 ENUMDOC
4963   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4964   (high 8 bit of 16 bit command address) into 8 bit immediate value
4965   of SUBI insn.
4966 ENUM
4967   BFD_RELOC_AVR_HH8_LDI_PM_NEG
4968 ENUMDOC
4969   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4970   (high 6 bit of 22 bit command address) into 8 bit immediate
4971   value of SUBI insn.
4972 ENUM
4973   BFD_RELOC_AVR_CALL
4974 ENUMDOC
4975   This is a 32 bit reloc for the AVR that stores 23 bit value
4976   into 22 bits.
4977 ENUM
4978   BFD_RELOC_AVR_LDI
4979 ENUMDOC
4980   This is a 16 bit reloc for the AVR that stores all needed bits
4981   for absolute addressing with ldi with overflow check to linktime
4982 ENUM
4983   BFD_RELOC_AVR_6
4984 ENUMDOC
4985   This is a 6 bit reloc for the AVR that stores offset for ldd/std
4986   instructions
4987 ENUM
4988   BFD_RELOC_AVR_6_ADIW
4989 ENUMDOC
4990   This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
4991   instructions
4992 ENUM
4993   BFD_RELOC_AVR_8_LO
4994 ENUMDOC
4995   This is a 8 bit reloc for the AVR that stores bits 0..7 of a symbol
4996   in .byte lo8(symbol)
4997 ENUM
4998   BFD_RELOC_AVR_8_HI
4999 ENUMDOC
5000   This is a 8 bit reloc for the AVR that stores bits 8..15 of a symbol
5001   in .byte hi8(symbol)
5002 ENUM
5003   BFD_RELOC_AVR_8_HLO
5004 ENUMDOC
5005   This is a 8 bit reloc for the AVR that stores bits 16..23 of a symbol
5006   in .byte hlo8(symbol)
5007 ENUM
5008   BFD_RELOC_AVR_DIFF8
5009 ENUMX
5010   BFD_RELOC_AVR_DIFF16
5011 ENUMX
5012   BFD_RELOC_AVR_DIFF32
5013 ENUMDOC
5014   AVR relocations to mark the difference of two local symbols.
5015   These are only needed to support linker relaxation and can be ignored
5016   when not relaxing.  The field is set to the value of the difference
5017   assuming no relaxation.  The relocation encodes the position of the
5018   second symbol so the linker can determine whether to adjust the field
5019   value.
5020 ENUM
5021   BFD_RELOC_AVR_LDS_STS_16
5022 ENUMDOC
5023   This is a 7 bit reloc for the AVR that stores SRAM address for 16bit
5024   lds and sts instructions supported only tiny core.
5025 ENUM
5026   BFD_RELOC_AVR_PORT6
5027 ENUMDOC
5028   This is a 6 bit reloc for the AVR that stores an I/O register
5029   number for the IN and OUT instructions
5030 ENUM
5031   BFD_RELOC_AVR_PORT5
5032 ENUMDOC
5033   This is a 5 bit reloc for the AVR that stores an I/O register
5034   number for the SBIC, SBIS, SBI and CBI instructions
5035 ENUM
5036   BFD_RELOC_RL78_NEG8
5037 ENUMX
5038   BFD_RELOC_RL78_NEG16
5039 ENUMX
5040   BFD_RELOC_RL78_NEG24
5041 ENUMX
5042   BFD_RELOC_RL78_NEG32
5043 ENUMX
5044   BFD_RELOC_RL78_16_OP
5045 ENUMX
5046   BFD_RELOC_RL78_24_OP
5047 ENUMX
5048   BFD_RELOC_RL78_32_OP
5049 ENUMX
5050   BFD_RELOC_RL78_8U
5051 ENUMX
5052   BFD_RELOC_RL78_16U
5053 ENUMX
5054   BFD_RELOC_RL78_24U
5055 ENUMX
5056   BFD_RELOC_RL78_DIR3U_PCREL
5057 ENUMX
5058   BFD_RELOC_RL78_DIFF
5059 ENUMX
5060   BFD_RELOC_RL78_GPRELB
5061 ENUMX
5062   BFD_RELOC_RL78_GPRELW
5063 ENUMX
5064   BFD_RELOC_RL78_GPRELL
5065 ENUMX
5066   BFD_RELOC_RL78_SYM
5067 ENUMX
5068   BFD_RELOC_RL78_OP_SUBTRACT
5069 ENUMX
5070   BFD_RELOC_RL78_OP_NEG
5071 ENUMX
5072   BFD_RELOC_RL78_OP_AND
5073 ENUMX
5074   BFD_RELOC_RL78_OP_SHRA
5075 ENUMX
5076   BFD_RELOC_RL78_ABS8
5077 ENUMX
5078   BFD_RELOC_RL78_ABS16
5079 ENUMX
5080   BFD_RELOC_RL78_ABS16_REV
5081 ENUMX
5082   BFD_RELOC_RL78_ABS32
5083 ENUMX
5084   BFD_RELOC_RL78_ABS32_REV
5085 ENUMX
5086   BFD_RELOC_RL78_ABS16U
5087 ENUMX
5088   BFD_RELOC_RL78_ABS16UW
5089 ENUMX
5090   BFD_RELOC_RL78_ABS16UL
5091 ENUMX
5092   BFD_RELOC_RL78_RELAX
5093 ENUMX
5094   BFD_RELOC_RL78_HI16
5095 ENUMX
5096   BFD_RELOC_RL78_HI8
5097 ENUMX
5098   BFD_RELOC_RL78_LO16
5099 ENUMX
5100   BFD_RELOC_RL78_CODE
5101 ENUMX
5102   BFD_RELOC_RL78_SADDR
5103 ENUMDOC
5104   Renesas RL78 Relocations.
5105
5106 ENUM
5107   BFD_RELOC_RX_NEG8
5108 ENUMX
5109   BFD_RELOC_RX_NEG16
5110 ENUMX
5111   BFD_RELOC_RX_NEG24
5112 ENUMX
5113   BFD_RELOC_RX_NEG32
5114 ENUMX
5115   BFD_RELOC_RX_16_OP
5116 ENUMX
5117   BFD_RELOC_RX_24_OP
5118 ENUMX
5119   BFD_RELOC_RX_32_OP
5120 ENUMX
5121   BFD_RELOC_RX_8U
5122 ENUMX
5123   BFD_RELOC_RX_16U
5124 ENUMX
5125   BFD_RELOC_RX_24U
5126 ENUMX
5127   BFD_RELOC_RX_DIR3U_PCREL
5128 ENUMX
5129   BFD_RELOC_RX_DIFF
5130 ENUMX
5131   BFD_RELOC_RX_GPRELB
5132 ENUMX
5133   BFD_RELOC_RX_GPRELW
5134 ENUMX
5135   BFD_RELOC_RX_GPRELL
5136 ENUMX
5137   BFD_RELOC_RX_SYM
5138 ENUMX
5139   BFD_RELOC_RX_OP_SUBTRACT
5140 ENUMX
5141   BFD_RELOC_RX_OP_NEG
5142 ENUMX
5143   BFD_RELOC_RX_ABS8
5144 ENUMX
5145   BFD_RELOC_RX_ABS16
5146 ENUMX
5147   BFD_RELOC_RX_ABS16_REV
5148 ENUMX
5149   BFD_RELOC_RX_ABS32
5150 ENUMX
5151   BFD_RELOC_RX_ABS32_REV
5152 ENUMX
5153   BFD_RELOC_RX_ABS16U
5154 ENUMX
5155   BFD_RELOC_RX_ABS16UW
5156 ENUMX
5157   BFD_RELOC_RX_ABS16UL
5158 ENUMX
5159   BFD_RELOC_RX_RELAX
5160 ENUMDOC
5161   Renesas RX Relocations.
5162
5163 ENUM
5164   BFD_RELOC_390_12
5165 ENUMDOC
5166    Direct 12 bit.
5167 ENUM
5168   BFD_RELOC_390_GOT12
5169 ENUMDOC
5170   12 bit GOT offset.
5171 ENUM
5172   BFD_RELOC_390_PLT32
5173 ENUMDOC
5174   32 bit PC relative PLT address.
5175 ENUM
5176   BFD_RELOC_390_COPY
5177 ENUMDOC
5178   Copy symbol at runtime.
5179 ENUM
5180   BFD_RELOC_390_GLOB_DAT
5181 ENUMDOC
5182   Create GOT entry.
5183 ENUM
5184   BFD_RELOC_390_JMP_SLOT
5185 ENUMDOC
5186   Create PLT entry.
5187 ENUM
5188   BFD_RELOC_390_RELATIVE
5189 ENUMDOC
5190   Adjust by program base.
5191 ENUM
5192   BFD_RELOC_390_GOTPC
5193 ENUMDOC
5194   32 bit PC relative offset to GOT.
5195 ENUM
5196   BFD_RELOC_390_GOT16
5197 ENUMDOC
5198   16 bit GOT offset.
5199 ENUM
5200   BFD_RELOC_390_PC12DBL
5201 ENUMDOC
5202   PC relative 12 bit shifted by 1.
5203 ENUM
5204   BFD_RELOC_390_PLT12DBL
5205 ENUMDOC
5206   12 bit PC rel. PLT shifted by 1.
5207 ENUM
5208   BFD_RELOC_390_PC16DBL
5209 ENUMDOC
5210   PC relative 16 bit shifted by 1.
5211 ENUM
5212   BFD_RELOC_390_PLT16DBL
5213 ENUMDOC
5214   16 bit PC rel. PLT shifted by 1.
5215 ENUM
5216   BFD_RELOC_390_PC24DBL
5217 ENUMDOC
5218   PC relative 24 bit shifted by 1.
5219 ENUM
5220   BFD_RELOC_390_PLT24DBL
5221 ENUMDOC
5222   24 bit PC rel. PLT shifted by 1.
5223 ENUM
5224   BFD_RELOC_390_PC32DBL
5225 ENUMDOC
5226   PC relative 32 bit shifted by 1.
5227 ENUM
5228   BFD_RELOC_390_PLT32DBL
5229 ENUMDOC
5230   32 bit PC rel. PLT shifted by 1.
5231 ENUM
5232   BFD_RELOC_390_GOTPCDBL
5233 ENUMDOC
5234   32 bit PC rel. GOT shifted by 1.
5235 ENUM
5236   BFD_RELOC_390_GOT64
5237 ENUMDOC
5238   64 bit GOT offset.
5239 ENUM
5240   BFD_RELOC_390_PLT64
5241 ENUMDOC
5242   64 bit PC relative PLT address.
5243 ENUM
5244   BFD_RELOC_390_GOTENT
5245 ENUMDOC
5246   32 bit rel. offset to GOT entry.
5247 ENUM
5248   BFD_RELOC_390_GOTOFF64
5249 ENUMDOC
5250   64 bit offset to GOT.
5251 ENUM
5252   BFD_RELOC_390_GOTPLT12
5253 ENUMDOC
5254   12-bit offset to symbol-entry within GOT, with PLT handling.
5255 ENUM
5256   BFD_RELOC_390_GOTPLT16
5257 ENUMDOC
5258   16-bit offset to symbol-entry within GOT, with PLT handling.
5259 ENUM
5260   BFD_RELOC_390_GOTPLT32
5261 ENUMDOC
5262   32-bit offset to symbol-entry within GOT, with PLT handling.
5263 ENUM
5264   BFD_RELOC_390_GOTPLT64
5265 ENUMDOC
5266   64-bit offset to symbol-entry within GOT, with PLT handling.
5267 ENUM
5268   BFD_RELOC_390_GOTPLTENT
5269 ENUMDOC
5270   32-bit rel. offset to symbol-entry within GOT, with PLT handling.
5271 ENUM
5272   BFD_RELOC_390_PLTOFF16
5273 ENUMDOC
5274   16-bit rel. offset from the GOT to a PLT entry.
5275 ENUM
5276   BFD_RELOC_390_PLTOFF32
5277 ENUMDOC
5278   32-bit rel. offset from the GOT to a PLT entry.
5279 ENUM
5280   BFD_RELOC_390_PLTOFF64
5281 ENUMDOC
5282   64-bit rel. offset from the GOT to a PLT entry.
5283
5284 ENUM
5285   BFD_RELOC_390_TLS_LOAD
5286 ENUMX
5287   BFD_RELOC_390_TLS_GDCALL
5288 ENUMX
5289   BFD_RELOC_390_TLS_LDCALL
5290 ENUMX
5291   BFD_RELOC_390_TLS_GD32
5292 ENUMX
5293   BFD_RELOC_390_TLS_GD64
5294 ENUMX
5295   BFD_RELOC_390_TLS_GOTIE12
5296 ENUMX
5297   BFD_RELOC_390_TLS_GOTIE32
5298 ENUMX
5299   BFD_RELOC_390_TLS_GOTIE64
5300 ENUMX
5301   BFD_RELOC_390_TLS_LDM32
5302 ENUMX
5303   BFD_RELOC_390_TLS_LDM64
5304 ENUMX
5305   BFD_RELOC_390_TLS_IE32
5306 ENUMX
5307   BFD_RELOC_390_TLS_IE64
5308 ENUMX
5309   BFD_RELOC_390_TLS_IEENT
5310 ENUMX
5311   BFD_RELOC_390_TLS_LE32
5312 ENUMX
5313   BFD_RELOC_390_TLS_LE64
5314 ENUMX
5315   BFD_RELOC_390_TLS_LDO32
5316 ENUMX
5317   BFD_RELOC_390_TLS_LDO64
5318 ENUMX
5319   BFD_RELOC_390_TLS_DTPMOD
5320 ENUMX
5321   BFD_RELOC_390_TLS_DTPOFF
5322 ENUMX
5323   BFD_RELOC_390_TLS_TPOFF
5324 ENUMDOC
5325   s390 tls relocations.
5326
5327 ENUM
5328   BFD_RELOC_390_20
5329 ENUMX
5330   BFD_RELOC_390_GOT20
5331 ENUMX
5332   BFD_RELOC_390_GOTPLT20
5333 ENUMX
5334   BFD_RELOC_390_TLS_GOTIE20
5335 ENUMDOC
5336   Long displacement extension.
5337
5338 ENUM
5339   BFD_RELOC_390_IRELATIVE
5340 ENUMDOC
5341   STT_GNU_IFUNC relocation.
5342
5343 ENUM
5344   BFD_RELOC_SCORE_GPREL15
5345 ENUMDOC
5346   Score relocations
5347   Low 16 bit for load/store
5348 ENUM
5349   BFD_RELOC_SCORE_DUMMY2
5350 ENUMX
5351   BFD_RELOC_SCORE_JMP
5352 ENUMDOC
5353   This is a 24-bit reloc with the right 1 bit assumed to be 0
5354 ENUM
5355   BFD_RELOC_SCORE_BRANCH
5356 ENUMDOC
5357   This is a 19-bit reloc with the right 1 bit assumed to be 0
5358 ENUM
5359   BFD_RELOC_SCORE_IMM30
5360 ENUMDOC
5361   This is a 32-bit reloc for 48-bit instructions.
5362 ENUM
5363   BFD_RELOC_SCORE_IMM32
5364 ENUMDOC
5365   This is a 32-bit reloc for 48-bit instructions.
5366 ENUM
5367   BFD_RELOC_SCORE16_JMP
5368 ENUMDOC
5369   This is a 11-bit reloc with the right 1 bit assumed to be 0
5370 ENUM
5371   BFD_RELOC_SCORE16_BRANCH
5372 ENUMDOC
5373   This is a 8-bit reloc with the right 1 bit assumed to be 0
5374 ENUM
5375   BFD_RELOC_SCORE_BCMP
5376 ENUMDOC
5377    This is a 9-bit reloc with the right 1 bit assumed to be 0
5378 ENUM
5379   BFD_RELOC_SCORE_GOT15
5380 ENUMX
5381   BFD_RELOC_SCORE_GOT_LO16
5382 ENUMX
5383   BFD_RELOC_SCORE_CALL15
5384 ENUMX
5385   BFD_RELOC_SCORE_DUMMY_HI16
5386 ENUMDOC
5387   Undocumented Score relocs
5388
5389 ENUM
5390   BFD_RELOC_IP2K_FR9
5391 ENUMDOC
5392   Scenix IP2K - 9-bit register number / data address
5393 ENUM
5394   BFD_RELOC_IP2K_BANK
5395 ENUMDOC
5396   Scenix IP2K - 4-bit register/data bank number
5397 ENUM
5398   BFD_RELOC_IP2K_ADDR16CJP
5399 ENUMDOC
5400   Scenix IP2K - low 13 bits of instruction word address
5401 ENUM
5402   BFD_RELOC_IP2K_PAGE3
5403 ENUMDOC
5404   Scenix IP2K - high 3 bits of instruction word address
5405 ENUM
5406   BFD_RELOC_IP2K_LO8DATA
5407 ENUMX
5408   BFD_RELOC_IP2K_HI8DATA
5409 ENUMX
5410   BFD_RELOC_IP2K_EX8DATA
5411 ENUMDOC
5412   Scenix IP2K - ext/low/high 8 bits of data address
5413 ENUM
5414   BFD_RELOC_IP2K_LO8INSN
5415 ENUMX
5416   BFD_RELOC_IP2K_HI8INSN
5417 ENUMDOC
5418   Scenix IP2K - low/high 8 bits of instruction word address
5419 ENUM
5420   BFD_RELOC_IP2K_PC_SKIP
5421 ENUMDOC
5422   Scenix IP2K - even/odd PC modifier to modify snb pcl.0
5423 ENUM
5424   BFD_RELOC_IP2K_TEXT
5425 ENUMDOC
5426   Scenix IP2K - 16 bit word address in text section.
5427 ENUM
5428   BFD_RELOC_IP2K_FR_OFFSET
5429 ENUMDOC
5430   Scenix IP2K - 7-bit sp or dp offset
5431 ENUM
5432   BFD_RELOC_VPE4KMATH_DATA
5433 ENUMX
5434   BFD_RELOC_VPE4KMATH_INSN
5435 ENUMDOC
5436   Scenix VPE4K coprocessor - data/insn-space addressing
5437
5438 ENUM
5439   BFD_RELOC_VTABLE_INHERIT
5440 ENUMX
5441   BFD_RELOC_VTABLE_ENTRY
5442 ENUMDOC
5443   These two relocations are used by the linker to determine which of
5444   the entries in a C++ virtual function table are actually used.  When
5445   the --gc-sections option is given, the linker will zero out the entries
5446   that are not used, so that the code for those functions need not be
5447   included in the output.
5448
5449   VTABLE_INHERIT is a zero-space relocation used to describe to the
5450   linker the inheritance tree of a C++ virtual function table.  The
5451   relocation's symbol should be the parent class' vtable, and the
5452   relocation should be located at the child vtable.
5453
5454   VTABLE_ENTRY is a zero-space relocation that describes the use of a
5455   virtual function table entry.  The reloc's symbol should refer to the
5456   table of the class mentioned in the code.  Off of that base, an offset
5457   describes the entry that is being used.  For Rela hosts, this offset
5458   is stored in the reloc's addend.  For Rel hosts, we are forced to put
5459   this offset in the reloc's section offset.
5460
5461 ENUM
5462   BFD_RELOC_IA64_IMM14
5463 ENUMX
5464   BFD_RELOC_IA64_IMM22
5465 ENUMX
5466   BFD_RELOC_IA64_IMM64
5467 ENUMX
5468   BFD_RELOC_IA64_DIR32MSB
5469 ENUMX
5470   BFD_RELOC_IA64_DIR32LSB
5471 ENUMX
5472   BFD_RELOC_IA64_DIR64MSB
5473 ENUMX
5474   BFD_RELOC_IA64_DIR64LSB
5475 ENUMX
5476   BFD_RELOC_IA64_GPREL22
5477 ENUMX
5478   BFD_RELOC_IA64_GPREL64I
5479 ENUMX
5480   BFD_RELOC_IA64_GPREL32MSB
5481 ENUMX
5482   BFD_RELOC_IA64_GPREL32LSB
5483 ENUMX
5484   BFD_RELOC_IA64_GPREL64MSB
5485 ENUMX
5486   BFD_RELOC_IA64_GPREL64LSB
5487 ENUMX
5488   BFD_RELOC_IA64_LTOFF22
5489 ENUMX
5490   BFD_RELOC_IA64_LTOFF64I
5491 ENUMX
5492   BFD_RELOC_IA64_PLTOFF22
5493 ENUMX
5494   BFD_RELOC_IA64_PLTOFF64I
5495 ENUMX
5496   BFD_RELOC_IA64_PLTOFF64MSB
5497 ENUMX
5498   BFD_RELOC_IA64_PLTOFF64LSB
5499 ENUMX
5500   BFD_RELOC_IA64_FPTR64I
5501 ENUMX
5502   BFD_RELOC_IA64_FPTR32MSB
5503 ENUMX
5504   BFD_RELOC_IA64_FPTR32LSB
5505 ENUMX
5506   BFD_RELOC_IA64_FPTR64MSB
5507 ENUMX
5508   BFD_RELOC_IA64_FPTR64LSB
5509 ENUMX
5510   BFD_RELOC_IA64_PCREL21B
5511 ENUMX
5512   BFD_RELOC_IA64_PCREL21BI
5513 ENUMX
5514   BFD_RELOC_IA64_PCREL21M
5515 ENUMX
5516   BFD_RELOC_IA64_PCREL21F
5517 ENUMX
5518   BFD_RELOC_IA64_PCREL22
5519 ENUMX
5520   BFD_RELOC_IA64_PCREL60B
5521 ENUMX
5522   BFD_RELOC_IA64_PCREL64I
5523 ENUMX
5524   BFD_RELOC_IA64_PCREL32MSB
5525 ENUMX
5526   BFD_RELOC_IA64_PCREL32LSB
5527 ENUMX
5528   BFD_RELOC_IA64_PCREL64MSB
5529 ENUMX
5530   BFD_RELOC_IA64_PCREL64LSB
5531 ENUMX
5532   BFD_RELOC_IA64_LTOFF_FPTR22
5533 ENUMX
5534   BFD_RELOC_IA64_LTOFF_FPTR64I
5535 ENUMX
5536   BFD_RELOC_IA64_LTOFF_FPTR32MSB
5537 ENUMX
5538   BFD_RELOC_IA64_LTOFF_FPTR32LSB
5539 ENUMX
5540   BFD_RELOC_IA64_LTOFF_FPTR64MSB
5541 ENUMX
5542   BFD_RELOC_IA64_LTOFF_FPTR64LSB
5543 ENUMX
5544   BFD_RELOC_IA64_SEGREL32MSB
5545 ENUMX
5546   BFD_RELOC_IA64_SEGREL32LSB
5547 ENUMX
5548   BFD_RELOC_IA64_SEGREL64MSB
5549 ENUMX
5550   BFD_RELOC_IA64_SEGREL64LSB
5551 ENUMX
5552   BFD_RELOC_IA64_SECREL32MSB
5553 ENUMX
5554   BFD_RELOC_IA64_SECREL32LSB
5555 ENUMX
5556   BFD_RELOC_IA64_SECREL64MSB
5557 ENUMX
5558   BFD_RELOC_IA64_SECREL64LSB
5559 ENUMX
5560   BFD_RELOC_IA64_REL32MSB
5561 ENUMX
5562   BFD_RELOC_IA64_REL32LSB
5563 ENUMX
5564   BFD_RELOC_IA64_REL64MSB
5565 ENUMX
5566   BFD_RELOC_IA64_REL64LSB
5567 ENUMX
5568   BFD_RELOC_IA64_LTV32MSB
5569 ENUMX
5570   BFD_RELOC_IA64_LTV32LSB
5571 ENUMX
5572   BFD_RELOC_IA64_LTV64MSB
5573 ENUMX
5574   BFD_RELOC_IA64_LTV64LSB
5575 ENUMX
5576   BFD_RELOC_IA64_IPLTMSB
5577 ENUMX
5578   BFD_RELOC_IA64_IPLTLSB
5579 ENUMX
5580   BFD_RELOC_IA64_COPY
5581 ENUMX
5582   BFD_RELOC_IA64_LTOFF22X
5583 ENUMX
5584   BFD_RELOC_IA64_LDXMOV
5585 ENUMX
5586   BFD_RELOC_IA64_TPREL14
5587 ENUMX
5588   BFD_RELOC_IA64_TPREL22
5589 ENUMX
5590   BFD_RELOC_IA64_TPREL64I
5591 ENUMX
5592   BFD_RELOC_IA64_TPREL64MSB
5593 ENUMX
5594   BFD_RELOC_IA64_TPREL64LSB
5595 ENUMX
5596   BFD_RELOC_IA64_LTOFF_TPREL22
5597 ENUMX
5598   BFD_RELOC_IA64_DTPMOD64MSB
5599 ENUMX
5600   BFD_RELOC_IA64_DTPMOD64LSB
5601 ENUMX
5602   BFD_RELOC_IA64_LTOFF_DTPMOD22
5603 ENUMX
5604   BFD_RELOC_IA64_DTPREL14
5605 ENUMX
5606   BFD_RELOC_IA64_DTPREL22
5607 ENUMX
5608   BFD_RELOC_IA64_DTPREL64I
5609 ENUMX
5610   BFD_RELOC_IA64_DTPREL32MSB
5611 ENUMX
5612   BFD_RELOC_IA64_DTPREL32LSB
5613 ENUMX
5614   BFD_RELOC_IA64_DTPREL64MSB
5615 ENUMX
5616   BFD_RELOC_IA64_DTPREL64LSB
5617 ENUMX
5618   BFD_RELOC_IA64_LTOFF_DTPREL22
5619 ENUMDOC
5620   Intel IA64 Relocations.
5621
5622 ENUM
5623   BFD_RELOC_M68HC11_HI8
5624 ENUMDOC
5625   Motorola 68HC11 reloc.
5626   This is the 8 bit high part of an absolute address.
5627 ENUM
5628   BFD_RELOC_M68HC11_LO8
5629 ENUMDOC
5630   Motorola 68HC11 reloc.
5631   This is the 8 bit low part of an absolute address.
5632 ENUM
5633   BFD_RELOC_M68HC11_3B
5634 ENUMDOC
5635   Motorola 68HC11 reloc.
5636   This is the 3 bit of a value.
5637 ENUM
5638   BFD_RELOC_M68HC11_RL_JUMP
5639 ENUMDOC
5640   Motorola 68HC11 reloc.
5641   This reloc marks the beginning of a jump/call instruction.
5642   It is used for linker relaxation to correctly identify beginning
5643   of instruction and change some branches to use PC-relative
5644   addressing mode.
5645 ENUM
5646   BFD_RELOC_M68HC11_RL_GROUP
5647 ENUMDOC
5648   Motorola 68HC11 reloc.
5649   This reloc marks a group of several instructions that gcc generates
5650   and for which the linker relaxation pass can modify and/or remove
5651   some of them.
5652 ENUM
5653   BFD_RELOC_M68HC11_LO16
5654 ENUMDOC
5655   Motorola 68HC11 reloc.
5656   This is the 16-bit lower part of an address.  It is used for 'call'
5657   instruction to specify the symbol address without any special
5658   transformation (due to memory bank window).
5659 ENUM
5660   BFD_RELOC_M68HC11_PAGE
5661 ENUMDOC
5662   Motorola 68HC11 reloc.
5663   This is a 8-bit reloc that specifies the page number of an address.
5664   It is used by 'call' instruction to specify the page number of
5665   the symbol.
5666 ENUM
5667   BFD_RELOC_M68HC11_24
5668 ENUMDOC
5669   Motorola 68HC11 reloc.
5670   This is a 24-bit reloc that represents the address with a 16-bit
5671   value and a 8-bit page number.  The symbol address is transformed
5672   to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
5673 ENUM
5674   BFD_RELOC_M68HC12_5B
5675 ENUMDOC
5676   Motorola 68HC12 reloc.
5677   This is the 5 bits of a value.
5678 ENUM
5679   BFD_RELOC_XGATE_RL_JUMP
5680 ENUMDOC
5681   Freescale XGATE reloc.
5682   This reloc marks the beginning of a bra/jal instruction.
5683 ENUM
5684   BFD_RELOC_XGATE_RL_GROUP
5685 ENUMDOC
5686   Freescale XGATE reloc.
5687   This reloc marks a group of several instructions that gcc generates
5688   and for which the linker relaxation pass can modify and/or remove
5689   some of them.
5690 ENUM
5691   BFD_RELOC_XGATE_LO16
5692 ENUMDOC
5693   Freescale XGATE reloc.
5694   This is the 16-bit lower part of an address.  It is used for the '16-bit'
5695   instructions.
5696 ENUM
5697   BFD_RELOC_XGATE_GPAGE
5698 ENUMDOC
5699   Freescale XGATE reloc.
5700 ENUM
5701   BFD_RELOC_XGATE_24
5702 ENUMDOC
5703   Freescale XGATE reloc.
5704 ENUM
5705   BFD_RELOC_XGATE_PCREL_9
5706 ENUMDOC
5707   Freescale XGATE reloc.
5708   This is a 9-bit pc-relative reloc.
5709 ENUM
5710   BFD_RELOC_XGATE_PCREL_10
5711 ENUMDOC
5712   Freescale XGATE reloc.
5713   This is a 10-bit pc-relative reloc.
5714 ENUM
5715   BFD_RELOC_XGATE_IMM8_LO
5716 ENUMDOC
5717   Freescale XGATE reloc.
5718   This is the 16-bit lower part of an address.  It is used for the '16-bit'
5719   instructions.
5720 ENUM
5721   BFD_RELOC_XGATE_IMM8_HI
5722 ENUMDOC
5723   Freescale XGATE reloc.
5724   This is the 16-bit higher part of an address.  It is used for the '16-bit'
5725   instructions.
5726 ENUM
5727   BFD_RELOC_XGATE_IMM3
5728 ENUMDOC
5729   Freescale XGATE reloc.
5730   This is a 3-bit pc-relative reloc.
5731 ENUM
5732   BFD_RELOC_XGATE_IMM4
5733 ENUMDOC
5734   Freescale XGATE reloc.
5735   This is a 4-bit pc-relative reloc.
5736 ENUM
5737   BFD_RELOC_XGATE_IMM5
5738 ENUMDOC
5739   Freescale XGATE reloc.
5740   This is a 5-bit pc-relative reloc.
5741 ENUM
5742   BFD_RELOC_M68HC12_9B
5743 ENUMDOC
5744   Motorola 68HC12 reloc.
5745   This is the 9 bits of a value.
5746 ENUM
5747   BFD_RELOC_M68HC12_16B
5748 ENUMDOC
5749   Motorola 68HC12 reloc.
5750   This is the 16 bits of a value.
5751 ENUM
5752   BFD_RELOC_M68HC12_9_PCREL
5753 ENUMDOC
5754   Motorola 68HC12/XGATE reloc.
5755   This is a PCREL9 branch.
5756 ENUM
5757   BFD_RELOC_M68HC12_10_PCREL
5758 ENUMDOC
5759   Motorola 68HC12/XGATE reloc.
5760   This is a PCREL10 branch.
5761 ENUM
5762   BFD_RELOC_M68HC12_LO8XG
5763 ENUMDOC
5764   Motorola 68HC12/XGATE reloc.
5765   This is the 8 bit low part of an absolute address and immediately precedes
5766   a matching HI8XG part.
5767 ENUM
5768   BFD_RELOC_M68HC12_HI8XG
5769 ENUMDOC
5770   Motorola 68HC12/XGATE reloc.
5771   This is the 8 bit high part of an absolute address and immediately follows
5772   a matching LO8XG part.
5773 ENUM
5774   BFD_RELOC_16C_NUM08
5775 ENUMX
5776   BFD_RELOC_16C_NUM08_C
5777 ENUMX
5778   BFD_RELOC_16C_NUM16
5779 ENUMX
5780   BFD_RELOC_16C_NUM16_C
5781 ENUMX
5782   BFD_RELOC_16C_NUM32
5783 ENUMX
5784   BFD_RELOC_16C_NUM32_C
5785 ENUMX
5786   BFD_RELOC_16C_DISP04
5787 ENUMX
5788   BFD_RELOC_16C_DISP04_C
5789 ENUMX
5790   BFD_RELOC_16C_DISP08
5791 ENUMX
5792   BFD_RELOC_16C_DISP08_C
5793 ENUMX
5794   BFD_RELOC_16C_DISP16
5795 ENUMX
5796   BFD_RELOC_16C_DISP16_C
5797 ENUMX
5798   BFD_RELOC_16C_DISP24
5799 ENUMX
5800   BFD_RELOC_16C_DISP24_C
5801 ENUMX
5802   BFD_RELOC_16C_DISP24a
5803 ENUMX
5804   BFD_RELOC_16C_DISP24a_C
5805 ENUMX
5806   BFD_RELOC_16C_REG04
5807 ENUMX
5808   BFD_RELOC_16C_REG04_C
5809 ENUMX
5810   BFD_RELOC_16C_REG04a
5811 ENUMX
5812   BFD_RELOC_16C_REG04a_C
5813 ENUMX
5814   BFD_RELOC_16C_REG14
5815 ENUMX
5816   BFD_RELOC_16C_REG14_C
5817 ENUMX
5818   BFD_RELOC_16C_REG16
5819 ENUMX
5820   BFD_RELOC_16C_REG16_C
5821 ENUMX
5822   BFD_RELOC_16C_REG20
5823 ENUMX
5824   BFD_RELOC_16C_REG20_C
5825 ENUMX
5826   BFD_RELOC_16C_ABS20
5827 ENUMX
5828   BFD_RELOC_16C_ABS20_C
5829 ENUMX
5830   BFD_RELOC_16C_ABS24
5831 ENUMX
5832   BFD_RELOC_16C_ABS24_C
5833 ENUMX
5834   BFD_RELOC_16C_IMM04
5835 ENUMX
5836   BFD_RELOC_16C_IMM04_C
5837 ENUMX
5838   BFD_RELOC_16C_IMM16
5839 ENUMX
5840   BFD_RELOC_16C_IMM16_C
5841 ENUMX
5842   BFD_RELOC_16C_IMM20
5843 ENUMX
5844   BFD_RELOC_16C_IMM20_C
5845 ENUMX
5846   BFD_RELOC_16C_IMM24
5847 ENUMX
5848   BFD_RELOC_16C_IMM24_C
5849 ENUMX
5850   BFD_RELOC_16C_IMM32
5851 ENUMX
5852   BFD_RELOC_16C_IMM32_C
5853 ENUMDOC
5854   NS CR16C Relocations.
5855
5856 ENUM
5857   BFD_RELOC_CR16_NUM8
5858 ENUMX
5859   BFD_RELOC_CR16_NUM16
5860 ENUMX
5861   BFD_RELOC_CR16_NUM32
5862 ENUMX
5863   BFD_RELOC_CR16_NUM32a
5864 ENUMX
5865   BFD_RELOC_CR16_REGREL0
5866 ENUMX
5867   BFD_RELOC_CR16_REGREL4
5868 ENUMX
5869   BFD_RELOC_CR16_REGREL4a
5870 ENUMX
5871   BFD_RELOC_CR16_REGREL14
5872 ENUMX
5873   BFD_RELOC_CR16_REGREL14a
5874 ENUMX
5875   BFD_RELOC_CR16_REGREL16
5876 ENUMX
5877   BFD_RELOC_CR16_REGREL20
5878 ENUMX
5879   BFD_RELOC_CR16_REGREL20a
5880 ENUMX
5881   BFD_RELOC_CR16_ABS20
5882 ENUMX
5883   BFD_RELOC_CR16_ABS24
5884 ENUMX
5885   BFD_RELOC_CR16_IMM4
5886 ENUMX
5887   BFD_RELOC_CR16_IMM8
5888 ENUMX
5889   BFD_RELOC_CR16_IMM16
5890 ENUMX
5891   BFD_RELOC_CR16_IMM20
5892 ENUMX
5893   BFD_RELOC_CR16_IMM24
5894 ENUMX
5895   BFD_RELOC_CR16_IMM32
5896 ENUMX
5897   BFD_RELOC_CR16_IMM32a
5898 ENUMX
5899   BFD_RELOC_CR16_DISP4
5900 ENUMX
5901   BFD_RELOC_CR16_DISP8
5902 ENUMX
5903   BFD_RELOC_CR16_DISP16
5904 ENUMX
5905   BFD_RELOC_CR16_DISP20
5906 ENUMX
5907   BFD_RELOC_CR16_DISP24
5908 ENUMX
5909   BFD_RELOC_CR16_DISP24a
5910 ENUMX
5911   BFD_RELOC_CR16_SWITCH8
5912 ENUMX
5913   BFD_RELOC_CR16_SWITCH16
5914 ENUMX
5915   BFD_RELOC_CR16_SWITCH32
5916 ENUMX
5917   BFD_RELOC_CR16_GOT_REGREL20
5918 ENUMX
5919   BFD_RELOC_CR16_GOTC_REGREL20
5920 ENUMX
5921   BFD_RELOC_CR16_GLOB_DAT
5922 ENUMDOC
5923   NS CR16 Relocations.
5924
5925 ENUM
5926   BFD_RELOC_CRX_REL4
5927 ENUMX
5928   BFD_RELOC_CRX_REL8
5929 ENUMX
5930   BFD_RELOC_CRX_REL8_CMP
5931 ENUMX
5932   BFD_RELOC_CRX_REL16
5933 ENUMX
5934   BFD_RELOC_CRX_REL24
5935 ENUMX
5936   BFD_RELOC_CRX_REL32
5937 ENUMX
5938   BFD_RELOC_CRX_REGREL12
5939 ENUMX
5940   BFD_RELOC_CRX_REGREL22
5941 ENUMX
5942   BFD_RELOC_CRX_REGREL28
5943 ENUMX
5944   BFD_RELOC_CRX_REGREL32
5945 ENUMX
5946   BFD_RELOC_CRX_ABS16
5947 ENUMX
5948   BFD_RELOC_CRX_ABS32
5949 ENUMX
5950   BFD_RELOC_CRX_NUM8
5951 ENUMX
5952   BFD_RELOC_CRX_NUM16
5953 ENUMX
5954   BFD_RELOC_CRX_NUM32
5955 ENUMX
5956   BFD_RELOC_CRX_IMM16
5957 ENUMX
5958   BFD_RELOC_CRX_IMM32
5959 ENUMX
5960   BFD_RELOC_CRX_SWITCH8
5961 ENUMX
5962   BFD_RELOC_CRX_SWITCH16
5963 ENUMX
5964   BFD_RELOC_CRX_SWITCH32
5965 ENUMDOC
5966   NS CRX Relocations.
5967
5968 ENUM
5969   BFD_RELOC_CRIS_BDISP8
5970 ENUMX
5971   BFD_RELOC_CRIS_UNSIGNED_5
5972 ENUMX
5973   BFD_RELOC_CRIS_SIGNED_6
5974 ENUMX
5975   BFD_RELOC_CRIS_UNSIGNED_6
5976 ENUMX
5977   BFD_RELOC_CRIS_SIGNED_8
5978 ENUMX
5979   BFD_RELOC_CRIS_UNSIGNED_8
5980 ENUMX
5981   BFD_RELOC_CRIS_SIGNED_16
5982 ENUMX
5983   BFD_RELOC_CRIS_UNSIGNED_16
5984 ENUMX
5985   BFD_RELOC_CRIS_LAPCQ_OFFSET
5986 ENUMX
5987   BFD_RELOC_CRIS_UNSIGNED_4
5988 ENUMDOC
5989   These relocs are only used within the CRIS assembler.  They are not
5990   (at present) written to any object files.
5991 ENUM
5992   BFD_RELOC_CRIS_COPY
5993 ENUMX
5994   BFD_RELOC_CRIS_GLOB_DAT
5995 ENUMX
5996   BFD_RELOC_CRIS_JUMP_SLOT
5997 ENUMX
5998   BFD_RELOC_CRIS_RELATIVE
5999 ENUMDOC
6000   Relocs used in ELF shared libraries for CRIS.
6001 ENUM
6002   BFD_RELOC_CRIS_32_GOT
6003 ENUMDOC
6004   32-bit offset to symbol-entry within GOT.
6005 ENUM
6006   BFD_RELOC_CRIS_16_GOT
6007 ENUMDOC
6008   16-bit offset to symbol-entry within GOT.
6009 ENUM
6010   BFD_RELOC_CRIS_32_GOTPLT
6011 ENUMDOC
6012   32-bit offset to symbol-entry within GOT, with PLT handling.
6013 ENUM
6014   BFD_RELOC_CRIS_16_GOTPLT
6015 ENUMDOC
6016   16-bit offset to symbol-entry within GOT, with PLT handling.
6017 ENUM
6018   BFD_RELOC_CRIS_32_GOTREL
6019 ENUMDOC
6020   32-bit offset to symbol, relative to GOT.
6021 ENUM
6022   BFD_RELOC_CRIS_32_PLT_GOTREL
6023 ENUMDOC
6024   32-bit offset to symbol with PLT entry, relative to GOT.
6025 ENUM
6026   BFD_RELOC_CRIS_32_PLT_PCREL
6027 ENUMDOC
6028   32-bit offset to symbol with PLT entry, relative to this relocation.
6029
6030 ENUM
6031   BFD_RELOC_CRIS_32_GOT_GD
6032 ENUMX
6033   BFD_RELOC_CRIS_16_GOT_GD
6034 ENUMX
6035   BFD_RELOC_CRIS_32_GD
6036 ENUMX
6037   BFD_RELOC_CRIS_DTP
6038 ENUMX
6039   BFD_RELOC_CRIS_32_DTPREL
6040 ENUMX
6041   BFD_RELOC_CRIS_16_DTPREL
6042 ENUMX
6043   BFD_RELOC_CRIS_32_GOT_TPREL
6044 ENUMX
6045   BFD_RELOC_CRIS_16_GOT_TPREL
6046 ENUMX
6047   BFD_RELOC_CRIS_32_TPREL
6048 ENUMX
6049   BFD_RELOC_CRIS_16_TPREL
6050 ENUMX
6051   BFD_RELOC_CRIS_DTPMOD
6052 ENUMX
6053   BFD_RELOC_CRIS_32_IE
6054 ENUMDOC
6055   Relocs used in TLS code for CRIS.
6056
6057 ENUM
6058   BFD_RELOC_860_COPY
6059 ENUMX
6060   BFD_RELOC_860_GLOB_DAT
6061 ENUMX
6062   BFD_RELOC_860_JUMP_SLOT
6063 ENUMX
6064   BFD_RELOC_860_RELATIVE
6065 ENUMX
6066   BFD_RELOC_860_PC26
6067 ENUMX
6068   BFD_RELOC_860_PLT26
6069 ENUMX
6070   BFD_RELOC_860_PC16
6071 ENUMX
6072   BFD_RELOC_860_LOW0
6073 ENUMX
6074   BFD_RELOC_860_SPLIT0
6075 ENUMX
6076   BFD_RELOC_860_LOW1
6077 ENUMX
6078   BFD_RELOC_860_SPLIT1
6079 ENUMX
6080   BFD_RELOC_860_LOW2
6081 ENUMX
6082   BFD_RELOC_860_SPLIT2
6083 ENUMX
6084   BFD_RELOC_860_LOW3
6085 ENUMX
6086   BFD_RELOC_860_LOGOT0
6087 ENUMX
6088   BFD_RELOC_860_SPGOT0
6089 ENUMX
6090   BFD_RELOC_860_LOGOT1
6091 ENUMX
6092   BFD_RELOC_860_SPGOT1
6093 ENUMX
6094   BFD_RELOC_860_LOGOTOFF0
6095 ENUMX
6096   BFD_RELOC_860_SPGOTOFF0
6097 ENUMX
6098   BFD_RELOC_860_LOGOTOFF1
6099 ENUMX
6100   BFD_RELOC_860_SPGOTOFF1
6101 ENUMX
6102   BFD_RELOC_860_LOGOTOFF2
6103 ENUMX
6104   BFD_RELOC_860_LOGOTOFF3
6105 ENUMX
6106   BFD_RELOC_860_LOPC
6107 ENUMX
6108   BFD_RELOC_860_HIGHADJ
6109 ENUMX
6110   BFD_RELOC_860_HAGOT
6111 ENUMX
6112   BFD_RELOC_860_HAGOTOFF
6113 ENUMX
6114   BFD_RELOC_860_HAPC
6115 ENUMX
6116   BFD_RELOC_860_HIGH
6117 ENUMX
6118   BFD_RELOC_860_HIGOT
6119 ENUMX
6120   BFD_RELOC_860_HIGOTOFF
6121 ENUMDOC
6122   Intel i860 Relocations.
6123
6124 ENUM
6125   BFD_RELOC_OR1K_REL_26
6126 ENUMX
6127   BFD_RELOC_OR1K_GOTPC_HI16
6128 ENUMX
6129   BFD_RELOC_OR1K_GOTPC_LO16
6130 ENUMX
6131   BFD_RELOC_OR1K_GOT16
6132 ENUMX
6133   BFD_RELOC_OR1K_PLT26
6134 ENUMX
6135   BFD_RELOC_OR1K_GOTOFF_HI16
6136 ENUMX
6137   BFD_RELOC_OR1K_GOTOFF_LO16
6138 ENUMX
6139   BFD_RELOC_OR1K_COPY
6140 ENUMX
6141   BFD_RELOC_OR1K_GLOB_DAT
6142 ENUMX
6143   BFD_RELOC_OR1K_JMP_SLOT
6144 ENUMX
6145   BFD_RELOC_OR1K_RELATIVE
6146 ENUMX
6147   BFD_RELOC_OR1K_TLS_GD_HI16
6148 ENUMX
6149   BFD_RELOC_OR1K_TLS_GD_LO16
6150 ENUMX
6151   BFD_RELOC_OR1K_TLS_LDM_HI16
6152 ENUMX
6153   BFD_RELOC_OR1K_TLS_LDM_LO16
6154 ENUMX
6155   BFD_RELOC_OR1K_TLS_LDO_HI16
6156 ENUMX
6157   BFD_RELOC_OR1K_TLS_LDO_LO16
6158 ENUMX
6159   BFD_RELOC_OR1K_TLS_IE_HI16
6160 ENUMX
6161   BFD_RELOC_OR1K_TLS_IE_LO16
6162 ENUMX
6163   BFD_RELOC_OR1K_TLS_LE_HI16
6164 ENUMX
6165   BFD_RELOC_OR1K_TLS_LE_LO16
6166 ENUMX
6167   BFD_RELOC_OR1K_TLS_TPOFF
6168 ENUMX
6169   BFD_RELOC_OR1K_TLS_DTPOFF
6170 ENUMX
6171   BFD_RELOC_OR1K_TLS_DTPMOD
6172 ENUMDOC
6173   OpenRISC 1000 Relocations.
6174
6175 ENUM
6176   BFD_RELOC_H8_DIR16A8
6177 ENUMX
6178   BFD_RELOC_H8_DIR16R8
6179 ENUMX
6180   BFD_RELOC_H8_DIR24A8
6181 ENUMX
6182   BFD_RELOC_H8_DIR24R8
6183 ENUMX
6184   BFD_RELOC_H8_DIR32A16
6185 ENUMX
6186   BFD_RELOC_H8_DISP32A16
6187 ENUMDOC
6188   H8 elf Relocations.
6189
6190 ENUM
6191   BFD_RELOC_XSTORMY16_REL_12
6192 ENUMX
6193   BFD_RELOC_XSTORMY16_12
6194 ENUMX
6195   BFD_RELOC_XSTORMY16_24
6196 ENUMX
6197   BFD_RELOC_XSTORMY16_FPTR16
6198 ENUMDOC
6199   Sony Xstormy16 Relocations.
6200
6201 ENUM
6202   BFD_RELOC_RELC
6203 ENUMDOC
6204   Self-describing complex relocations.
6205 COMMENT
6206
6207 ENUM
6208   BFD_RELOC_XC16X_PAG
6209 ENUMX
6210   BFD_RELOC_XC16X_POF
6211 ENUMX
6212   BFD_RELOC_XC16X_SEG
6213 ENUMX
6214   BFD_RELOC_XC16X_SOF
6215 ENUMDOC
6216   Infineon Relocations.
6217
6218 ENUM
6219   BFD_RELOC_VAX_GLOB_DAT
6220 ENUMX
6221   BFD_RELOC_VAX_JMP_SLOT
6222 ENUMX
6223   BFD_RELOC_VAX_RELATIVE
6224 ENUMDOC
6225   Relocations used by VAX ELF.
6226
6227 ENUM
6228   BFD_RELOC_MT_PC16
6229 ENUMDOC
6230   Morpho MT - 16 bit immediate relocation.
6231 ENUM
6232   BFD_RELOC_MT_HI16
6233 ENUMDOC
6234   Morpho MT - Hi 16 bits of an address.
6235 ENUM
6236   BFD_RELOC_MT_LO16
6237 ENUMDOC
6238   Morpho MT - Low 16 bits of an address.
6239 ENUM
6240   BFD_RELOC_MT_GNU_VTINHERIT
6241 ENUMDOC
6242   Morpho MT - Used to tell the linker which vtable entries are used.
6243 ENUM
6244   BFD_RELOC_MT_GNU_VTENTRY
6245 ENUMDOC
6246   Morpho MT - Used to tell the linker which vtable entries are used.
6247 ENUM
6248   BFD_RELOC_MT_PCINSN8
6249 ENUMDOC
6250   Morpho MT - 8 bit immediate relocation.
6251
6252 ENUM
6253   BFD_RELOC_MSP430_10_PCREL
6254 ENUMX
6255   BFD_RELOC_MSP430_16_PCREL
6256 ENUMX
6257   BFD_RELOC_MSP430_16
6258 ENUMX
6259   BFD_RELOC_MSP430_16_PCREL_BYTE
6260 ENUMX
6261   BFD_RELOC_MSP430_16_BYTE
6262 ENUMX
6263   BFD_RELOC_MSP430_2X_PCREL
6264 ENUMX
6265   BFD_RELOC_MSP430_RL_PCREL
6266 ENUMX
6267   BFD_RELOC_MSP430_ABS8
6268 ENUMX
6269   BFD_RELOC_MSP430X_PCR20_EXT_SRC
6270 ENUMX
6271   BFD_RELOC_MSP430X_PCR20_EXT_DST
6272 ENUMX
6273   BFD_RELOC_MSP430X_PCR20_EXT_ODST
6274 ENUMX
6275   BFD_RELOC_MSP430X_ABS20_EXT_SRC
6276 ENUMX
6277   BFD_RELOC_MSP430X_ABS20_EXT_DST
6278 ENUMX
6279   BFD_RELOC_MSP430X_ABS20_EXT_ODST
6280 ENUMX
6281   BFD_RELOC_MSP430X_ABS20_ADR_SRC
6282 ENUMX
6283   BFD_RELOC_MSP430X_ABS20_ADR_DST
6284 ENUMX
6285   BFD_RELOC_MSP430X_PCR16
6286 ENUMX
6287   BFD_RELOC_MSP430X_PCR20_CALL
6288 ENUMX
6289   BFD_RELOC_MSP430X_ABS16
6290 ENUMX
6291   BFD_RELOC_MSP430_ABS_HI16
6292 ENUMX
6293   BFD_RELOC_MSP430_PREL31
6294 ENUMX
6295   BFD_RELOC_MSP430_SYM_DIFF
6296 ENUMDOC
6297   msp430 specific relocation codes
6298
6299 ENUM
6300   BFD_RELOC_NIOS2_S16
6301 ENUMX
6302   BFD_RELOC_NIOS2_U16
6303 ENUMX
6304   BFD_RELOC_NIOS2_CALL26
6305 ENUMX
6306   BFD_RELOC_NIOS2_IMM5
6307 ENUMX
6308   BFD_RELOC_NIOS2_CACHE_OPX
6309 ENUMX
6310   BFD_RELOC_NIOS2_IMM6
6311 ENUMX
6312   BFD_RELOC_NIOS2_IMM8
6313 ENUMX
6314   BFD_RELOC_NIOS2_HI16
6315 ENUMX
6316   BFD_RELOC_NIOS2_LO16
6317 ENUMX
6318   BFD_RELOC_NIOS2_HIADJ16
6319 ENUMX
6320   BFD_RELOC_NIOS2_GPREL
6321 ENUMX
6322   BFD_RELOC_NIOS2_UJMP
6323 ENUMX
6324   BFD_RELOC_NIOS2_CJMP
6325 ENUMX
6326   BFD_RELOC_NIOS2_CALLR
6327 ENUMX
6328   BFD_RELOC_NIOS2_ALIGN
6329 ENUMX
6330   BFD_RELOC_NIOS2_GOT16
6331 ENUMX
6332   BFD_RELOC_NIOS2_CALL16
6333 ENUMX
6334   BFD_RELOC_NIOS2_GOTOFF_LO
6335 ENUMX
6336   BFD_RELOC_NIOS2_GOTOFF_HA
6337 ENUMX
6338   BFD_RELOC_NIOS2_PCREL_LO
6339 ENUMX
6340   BFD_RELOC_NIOS2_PCREL_HA
6341 ENUMX
6342   BFD_RELOC_NIOS2_TLS_GD16
6343 ENUMX
6344   BFD_RELOC_NIOS2_TLS_LDM16
6345 ENUMX
6346   BFD_RELOC_NIOS2_TLS_LDO16
6347 ENUMX
6348   BFD_RELOC_NIOS2_TLS_IE16
6349 ENUMX
6350   BFD_RELOC_NIOS2_TLS_LE16
6351 ENUMX
6352   BFD_RELOC_NIOS2_TLS_DTPMOD
6353 ENUMX
6354   BFD_RELOC_NIOS2_TLS_DTPREL
6355 ENUMX
6356   BFD_RELOC_NIOS2_TLS_TPREL
6357 ENUMX
6358   BFD_RELOC_NIOS2_COPY
6359 ENUMX
6360   BFD_RELOC_NIOS2_GLOB_DAT
6361 ENUMX
6362   BFD_RELOC_NIOS2_JUMP_SLOT
6363 ENUMX
6364   BFD_RELOC_NIOS2_RELATIVE
6365 ENUMX
6366   BFD_RELOC_NIOS2_GOTOFF
6367 ENUMX
6368   BFD_RELOC_NIOS2_CALL26_NOAT
6369 ENUMX
6370   BFD_RELOC_NIOS2_GOT_LO
6371 ENUMX
6372   BFD_RELOC_NIOS2_GOT_HA
6373 ENUMX
6374   BFD_RELOC_NIOS2_CALL_LO
6375 ENUMX
6376   BFD_RELOC_NIOS2_CALL_HA
6377 ENUMX
6378   BFD_RELOC_NIOS2_R2_S12
6379 ENUMX
6380   BFD_RELOC_NIOS2_R2_I10_1_PCREL
6381 ENUMX
6382   BFD_RELOC_NIOS2_R2_T1I7_1_PCREL
6383 ENUMX
6384   BFD_RELOC_NIOS2_R2_T1I7_2
6385 ENUMX
6386   BFD_RELOC_NIOS2_R2_T2I4
6387 ENUMX
6388   BFD_RELOC_NIOS2_R2_T2I4_1
6389 ENUMX
6390   BFD_RELOC_NIOS2_R2_T2I4_2
6391 ENUMX
6392   BFD_RELOC_NIOS2_R2_X1I7_2
6393 ENUMX
6394   BFD_RELOC_NIOS2_R2_X2L5
6395 ENUMX
6396   BFD_RELOC_NIOS2_R2_F1I5_2
6397 ENUMX
6398   BFD_RELOC_NIOS2_R2_L5I4X1
6399 ENUMX
6400   BFD_RELOC_NIOS2_R2_T1X1I6
6401 ENUMX
6402   BFD_RELOC_NIOS2_R2_T1X1I6_2
6403 ENUMDOC
6404   Relocations used by the Altera Nios II core.
6405
6406 ENUM
6407   BFD_RELOC_IQ2000_OFFSET_16
6408 ENUMX
6409   BFD_RELOC_IQ2000_OFFSET_21
6410 ENUMX
6411   BFD_RELOC_IQ2000_UHI16
6412 ENUMDOC
6413   IQ2000 Relocations.
6414
6415 ENUM
6416   BFD_RELOC_XTENSA_RTLD
6417 ENUMDOC
6418   Special Xtensa relocation used only by PLT entries in ELF shared
6419   objects to indicate that the runtime linker should set the value
6420   to one of its own internal functions or data structures.
6421 ENUM
6422   BFD_RELOC_XTENSA_GLOB_DAT
6423 ENUMX
6424   BFD_RELOC_XTENSA_JMP_SLOT
6425 ENUMX
6426   BFD_RELOC_XTENSA_RELATIVE
6427 ENUMDOC
6428   Xtensa relocations for ELF shared objects.
6429 ENUM
6430   BFD_RELOC_XTENSA_PLT
6431 ENUMDOC
6432   Xtensa relocation used in ELF object files for symbols that may require
6433   PLT entries.  Otherwise, this is just a generic 32-bit relocation.
6434 ENUM
6435   BFD_RELOC_XTENSA_DIFF8
6436 ENUMX
6437   BFD_RELOC_XTENSA_DIFF16
6438 ENUMX
6439   BFD_RELOC_XTENSA_DIFF32
6440 ENUMDOC
6441   Xtensa relocations to mark the difference of two local symbols.
6442   These are only needed to support linker relaxation and can be ignored
6443   when not relaxing.  The field is set to the value of the difference
6444   assuming no relaxation.  The relocation encodes the position of the
6445   first symbol so the linker can determine whether to adjust the field
6446   value.
6447 ENUM
6448   BFD_RELOC_XTENSA_SLOT0_OP
6449 ENUMX
6450   BFD_RELOC_XTENSA_SLOT1_OP
6451 ENUMX
6452   BFD_RELOC_XTENSA_SLOT2_OP
6453 ENUMX
6454   BFD_RELOC_XTENSA_SLOT3_OP
6455 ENUMX
6456   BFD_RELOC_XTENSA_SLOT4_OP
6457 ENUMX
6458   BFD_RELOC_XTENSA_SLOT5_OP
6459 ENUMX
6460   BFD_RELOC_XTENSA_SLOT6_OP
6461 ENUMX
6462   BFD_RELOC_XTENSA_SLOT7_OP
6463 ENUMX
6464   BFD_RELOC_XTENSA_SLOT8_OP
6465 ENUMX
6466   BFD_RELOC_XTENSA_SLOT9_OP
6467 ENUMX
6468   BFD_RELOC_XTENSA_SLOT10_OP
6469 ENUMX
6470   BFD_RELOC_XTENSA_SLOT11_OP
6471 ENUMX
6472   BFD_RELOC_XTENSA_SLOT12_OP
6473 ENUMX
6474   BFD_RELOC_XTENSA_SLOT13_OP
6475 ENUMX
6476   BFD_RELOC_XTENSA_SLOT14_OP
6477 ENUMDOC
6478   Generic Xtensa relocations for instruction operands.  Only the slot
6479   number is encoded in the relocation.  The relocation applies to the
6480   last PC-relative immediate operand, or if there are no PC-relative
6481   immediates, to the last immediate operand.
6482 ENUM
6483   BFD_RELOC_XTENSA_SLOT0_ALT
6484 ENUMX
6485   BFD_RELOC_XTENSA_SLOT1_ALT
6486 ENUMX
6487   BFD_RELOC_XTENSA_SLOT2_ALT
6488 ENUMX
6489   BFD_RELOC_XTENSA_SLOT3_ALT
6490 ENUMX
6491   BFD_RELOC_XTENSA_SLOT4_ALT
6492 ENUMX
6493   BFD_RELOC_XTENSA_SLOT5_ALT
6494 ENUMX
6495   BFD_RELOC_XTENSA_SLOT6_ALT
6496 ENUMX
6497   BFD_RELOC_XTENSA_SLOT7_ALT
6498 ENUMX
6499   BFD_RELOC_XTENSA_SLOT8_ALT
6500 ENUMX
6501   BFD_RELOC_XTENSA_SLOT9_ALT
6502 ENUMX
6503   BFD_RELOC_XTENSA_SLOT10_ALT
6504 ENUMX
6505   BFD_RELOC_XTENSA_SLOT11_ALT
6506 ENUMX
6507   BFD_RELOC_XTENSA_SLOT12_ALT
6508 ENUMX
6509   BFD_RELOC_XTENSA_SLOT13_ALT
6510 ENUMX
6511   BFD_RELOC_XTENSA_SLOT14_ALT
6512 ENUMDOC
6513   Alternate Xtensa relocations.  Only the slot is encoded in the
6514   relocation.  The meaning of these relocations is opcode-specific.
6515 ENUM
6516   BFD_RELOC_XTENSA_OP0
6517 ENUMX
6518   BFD_RELOC_XTENSA_OP1
6519 ENUMX
6520   BFD_RELOC_XTENSA_OP2
6521 ENUMDOC
6522   Xtensa relocations for backward compatibility.  These have all been
6523   replaced by BFD_RELOC_XTENSA_SLOT0_OP.
6524 ENUM
6525   BFD_RELOC_XTENSA_ASM_EXPAND
6526 ENUMDOC
6527   Xtensa relocation to mark that the assembler expanded the
6528   instructions from an original target.  The expansion size is
6529   encoded in the reloc size.
6530 ENUM
6531   BFD_RELOC_XTENSA_ASM_SIMPLIFY
6532 ENUMDOC
6533   Xtensa relocation to mark that the linker should simplify
6534   assembler-expanded instructions.  This is commonly used
6535   internally by the linker after analysis of a
6536   BFD_RELOC_XTENSA_ASM_EXPAND.
6537 ENUM
6538   BFD_RELOC_XTENSA_TLSDESC_FN
6539 ENUMX
6540   BFD_RELOC_XTENSA_TLSDESC_ARG
6541 ENUMX
6542   BFD_RELOC_XTENSA_TLS_DTPOFF
6543 ENUMX
6544   BFD_RELOC_XTENSA_TLS_TPOFF
6545 ENUMX
6546   BFD_RELOC_XTENSA_TLS_FUNC
6547 ENUMX
6548   BFD_RELOC_XTENSA_TLS_ARG
6549 ENUMX
6550   BFD_RELOC_XTENSA_TLS_CALL
6551 ENUMDOC
6552   Xtensa TLS relocations.
6553
6554 ENUM
6555   BFD_RELOC_Z80_DISP8
6556 ENUMDOC
6557   8 bit signed offset in (ix+d) or (iy+d).
6558
6559 ENUM
6560   BFD_RELOC_Z8K_DISP7
6561 ENUMDOC
6562   DJNZ offset.
6563 ENUM
6564   BFD_RELOC_Z8K_CALLR
6565 ENUMDOC
6566   CALR offset.
6567 ENUM
6568   BFD_RELOC_Z8K_IMM4L
6569 ENUMDOC
6570   4 bit value.
6571
6572 ENUM
6573    BFD_RELOC_LM32_CALL
6574 ENUMX
6575    BFD_RELOC_LM32_BRANCH
6576 ENUMX
6577    BFD_RELOC_LM32_16_GOT
6578 ENUMX
6579    BFD_RELOC_LM32_GOTOFF_HI16
6580 ENUMX
6581    BFD_RELOC_LM32_GOTOFF_LO16
6582 ENUMX
6583    BFD_RELOC_LM32_COPY
6584 ENUMX
6585    BFD_RELOC_LM32_GLOB_DAT
6586 ENUMX
6587    BFD_RELOC_LM32_JMP_SLOT
6588 ENUMX
6589    BFD_RELOC_LM32_RELATIVE
6590 ENUMDOC
6591  Lattice Mico32 relocations.
6592
6593 ENUM
6594   BFD_RELOC_MACH_O_SECTDIFF
6595 ENUMDOC
6596   Difference between two section addreses.  Must be followed by a
6597   BFD_RELOC_MACH_O_PAIR.
6598 ENUM
6599   BFD_RELOC_MACH_O_LOCAL_SECTDIFF
6600 ENUMDOC
6601   Like BFD_RELOC_MACH_O_SECTDIFF but with a local symbol.
6602 ENUM
6603   BFD_RELOC_MACH_O_PAIR
6604 ENUMDOC
6605   Pair of relocation.  Contains the first symbol.
6606 ENUM
6607   BFD_RELOC_MACH_O_SUBTRACTOR32
6608 ENUMDOC
6609   Symbol will be substracted.  Must be followed by a BFD_RELOC_32.
6610 ENUM
6611   BFD_RELOC_MACH_O_SUBTRACTOR64
6612 ENUMDOC
6613   Symbol will be substracted.  Must be followed by a BFD_RELOC_64.
6614
6615 ENUM
6616   BFD_RELOC_MACH_O_X86_64_BRANCH32
6617 ENUMX
6618   BFD_RELOC_MACH_O_X86_64_BRANCH8
6619 ENUMDOC
6620   PCREL relocations.  They are marked as branch to create PLT entry if
6621   required.
6622 ENUM
6623   BFD_RELOC_MACH_O_X86_64_GOT
6624 ENUMDOC
6625   Used when referencing a GOT entry.
6626 ENUM
6627   BFD_RELOC_MACH_O_X86_64_GOT_LOAD
6628 ENUMDOC
6629   Used when loading a GOT entry with movq.  It is specially marked so that
6630   the linker could optimize the movq to a leaq if possible.
6631 ENUM
6632   BFD_RELOC_MACH_O_X86_64_PCREL32_1
6633 ENUMDOC
6634   Same as BFD_RELOC_32_PCREL but with an implicit -1 addend.
6635 ENUM
6636   BFD_RELOC_MACH_O_X86_64_PCREL32_2
6637 ENUMDOC
6638   Same as BFD_RELOC_32_PCREL but with an implicit -2 addend.
6639 ENUM
6640   BFD_RELOC_MACH_O_X86_64_PCREL32_4
6641 ENUMDOC
6642   Same as BFD_RELOC_32_PCREL but with an implicit -4 addend.
6643
6644
6645 ENUM
6646   BFD_RELOC_MACH_O_ARM64_ADDEND
6647 ENUMDOC
6648   Addend for PAGE or PAGEOFF.
6649 ENUM
6650   BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGE21
6651 ENUMDOC
6652   Relative offset to page of GOT slot.
6653 ENUM
6654   BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGEOFF12
6655 ENUMDOC
6656   Relative offset within page of GOT slot.
6657 ENUM
6658   BFD_RELOC_MACH_O_ARM64_POINTER_TO_GOT
6659 ENUMDOC
6660   Address of a GOT entry.
6661
6662 ENUM
6663   BFD_RELOC_MICROBLAZE_32_LO
6664 ENUMDOC
6665   This is a 32 bit reloc for the microblaze that stores the
6666   low 16 bits of a value
6667 ENUM
6668   BFD_RELOC_MICROBLAZE_32_LO_PCREL
6669 ENUMDOC
6670   This is a 32 bit pc-relative reloc for the microblaze that
6671   stores the low 16 bits of a value
6672 ENUM
6673   BFD_RELOC_MICROBLAZE_32_ROSDA
6674 ENUMDOC
6675   This is a 32 bit reloc for the microblaze that stores a
6676   value relative to the read-only small data area anchor
6677 ENUM
6678   BFD_RELOC_MICROBLAZE_32_RWSDA
6679 ENUMDOC
6680   This is a 32 bit reloc for the microblaze that stores a
6681   value relative to the read-write small data area anchor
6682 ENUM
6683   BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM
6684 ENUMDOC
6685   This is a 32 bit reloc for the microblaze to handle
6686   expressions of the form "Symbol Op Symbol"
6687 ENUM
6688   BFD_RELOC_MICROBLAZE_64_NONE
6689 ENUMDOC
6690   This is a 64 bit reloc that stores the 32 bit pc relative
6691   value in two words (with an imm instruction).  No relocation is
6692   done here - only used for relaxing
6693 ENUM
6694   BFD_RELOC_MICROBLAZE_64_GOTPC
6695 ENUMDOC
6696   This is a 64 bit reloc that stores the 32 bit pc relative
6697   value in two words (with an imm instruction).  The relocation is
6698   PC-relative GOT offset
6699 ENUM
6700   BFD_RELOC_MICROBLAZE_64_GOT
6701 ENUMDOC
6702   This is a 64 bit reloc that stores the 32 bit pc relative
6703   value in two words (with an imm instruction).  The relocation is
6704   GOT offset
6705 ENUM
6706   BFD_RELOC_MICROBLAZE_64_PLT
6707 ENUMDOC
6708   This is a 64 bit reloc that stores the 32 bit pc relative
6709   value in two words (with an imm instruction).  The relocation is
6710   PC-relative offset into PLT
6711 ENUM
6712   BFD_RELOC_MICROBLAZE_64_GOTOFF
6713 ENUMDOC
6714   This is a 64 bit reloc that stores the 32 bit GOT relative
6715   value in two words (with an imm instruction).  The relocation is
6716   relative offset from _GLOBAL_OFFSET_TABLE_
6717 ENUM
6718   BFD_RELOC_MICROBLAZE_32_GOTOFF
6719 ENUMDOC
6720   This is a 32 bit reloc that stores the 32 bit GOT relative
6721   value in a word.  The relocation is relative offset from
6722   _GLOBAL_OFFSET_TABLE_
6723 ENUM
6724   BFD_RELOC_MICROBLAZE_COPY
6725 ENUMDOC
6726   This is used to tell the dynamic linker to copy the value out of
6727   the dynamic object into the runtime process image.
6728 ENUM
6729   BFD_RELOC_MICROBLAZE_64_TLS
6730 ENUMDOC
6731   Unused Reloc
6732 ENUM
6733   BFD_RELOC_MICROBLAZE_64_TLSGD
6734 ENUMDOC
6735   This is a 64 bit reloc that stores the 32 bit GOT relative value
6736   of the GOT TLS GD info entry in two words (with an imm instruction). The
6737   relocation is GOT offset.
6738 ENUM
6739   BFD_RELOC_MICROBLAZE_64_TLSLD
6740 ENUMDOC
6741   This is a 64 bit reloc that stores the 32 bit GOT relative value
6742   of the GOT TLS LD info entry in two words (with an imm instruction). The
6743   relocation is GOT offset.
6744 ENUM
6745   BFD_RELOC_MICROBLAZE_32_TLSDTPMOD
6746 ENUMDOC
6747   This is a 32 bit reloc that stores the Module ID to GOT(n).
6748 ENUM
6749   BFD_RELOC_MICROBLAZE_32_TLSDTPREL
6750 ENUMDOC
6751   This is a 32 bit reloc that stores TLS offset to GOT(n+1).
6752 ENUM
6753   BFD_RELOC_MICROBLAZE_64_TLSDTPREL
6754 ENUMDOC
6755   This is a 32 bit reloc for storing TLS offset to two words (uses imm
6756   instruction)
6757 ENUM
6758   BFD_RELOC_MICROBLAZE_64_TLSGOTTPREL
6759 ENUMDOC
6760   This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6761   to two words (uses imm instruction).
6762 ENUM
6763   BFD_RELOC_MICROBLAZE_64_TLSTPREL
6764 ENUMDOC
6765   This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6766   to two words (uses imm instruction).
6767
6768 ENUM
6769   BFD_RELOC_AARCH64_RELOC_START
6770 ENUMDOC
6771   AArch64 pseudo relocation code to mark the start of the AArch64
6772   relocation enumerators.  N.B. the order of the enumerators is
6773   important as several tables in the AArch64 bfd backend are indexed
6774   by these enumerators; make sure they are all synced.
6775 ENUM
6776   BFD_RELOC_AARCH64_NONE
6777 ENUMDOC
6778   AArch64 null relocation code.
6779 ENUM
6780   BFD_RELOC_AARCH64_64
6781 ENUMX
6782   BFD_RELOC_AARCH64_32
6783 ENUMX
6784   BFD_RELOC_AARCH64_16
6785 ENUMDOC
6786   Basic absolute relocations of N bits.  These are equivalent to
6787 BFD_RELOC_N and they were added to assist the indexing of the howto
6788 table.
6789 ENUM
6790   BFD_RELOC_AARCH64_64_PCREL
6791 ENUMX
6792   BFD_RELOC_AARCH64_32_PCREL
6793 ENUMX
6794   BFD_RELOC_AARCH64_16_PCREL
6795 ENUMDOC
6796   PC-relative relocations.  These are equivalent to BFD_RELOC_N_PCREL
6797 and they were added to assist the indexing of the howto table.
6798 ENUM
6799   BFD_RELOC_AARCH64_MOVW_G0
6800 ENUMDOC
6801   AArch64 MOV[NZK] instruction with most significant bits 0 to 15
6802   of an unsigned address/value.
6803 ENUM
6804   BFD_RELOC_AARCH64_MOVW_G0_NC
6805 ENUMDOC
6806   AArch64 MOV[NZK] instruction with less significant bits 0 to 15 of
6807   an address/value.  No overflow checking.
6808 ENUM
6809   BFD_RELOC_AARCH64_MOVW_G1
6810 ENUMDOC
6811   AArch64 MOV[NZK] instruction with most significant bits 16 to 31
6812   of an unsigned address/value.
6813 ENUM
6814   BFD_RELOC_AARCH64_MOVW_G1_NC
6815 ENUMDOC
6816   AArch64 MOV[NZK] instruction with less significant bits 16 to 31
6817   of an address/value.  No overflow checking.
6818 ENUM
6819   BFD_RELOC_AARCH64_MOVW_G2
6820 ENUMDOC
6821   AArch64 MOV[NZK] instruction with most significant bits 32 to 47
6822   of an unsigned address/value.
6823 ENUM
6824   BFD_RELOC_AARCH64_MOVW_G2_NC
6825 ENUMDOC
6826   AArch64 MOV[NZK] instruction with less significant bits 32 to 47
6827   of an address/value.  No overflow checking.
6828 ENUM
6829   BFD_RELOC_AARCH64_MOVW_G3
6830 ENUMDOC
6831   AArch64 MOV[NZK] instruction with most signficant bits 48 to 64
6832   of a signed or unsigned address/value.
6833 ENUM
6834   BFD_RELOC_AARCH64_MOVW_G0_S
6835 ENUMDOC
6836   AArch64 MOV[NZ] instruction with most significant bits 0 to 15
6837   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6838   value's sign.
6839 ENUM
6840   BFD_RELOC_AARCH64_MOVW_G1_S
6841 ENUMDOC
6842   AArch64 MOV[NZ] instruction with most significant bits 16 to 31
6843   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6844   value's sign.
6845 ENUM
6846   BFD_RELOC_AARCH64_MOVW_G2_S
6847 ENUMDOC
6848   AArch64 MOV[NZ] instruction with most significant bits 32 to 47
6849   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6850   value's sign.
6851 ENUM
6852   BFD_RELOC_AARCH64_LD_LO19_PCREL
6853 ENUMDOC
6854   AArch64 Load Literal instruction, holding a 19 bit pc-relative word
6855   offset.  The lowest two bits must be zero and are not stored in the
6856   instruction, giving a 21 bit signed byte offset.
6857 ENUM
6858   BFD_RELOC_AARCH64_ADR_LO21_PCREL
6859 ENUMDOC
6860   AArch64 ADR instruction, holding a simple 21 bit pc-relative byte offset.
6861 ENUM
6862   BFD_RELOC_AARCH64_ADR_HI21_PCREL
6863 ENUMDOC
6864   AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
6865   offset, giving a 4KB aligned page base address.
6866 ENUM
6867   BFD_RELOC_AARCH64_ADR_HI21_NC_PCREL
6868 ENUMDOC
6869   AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
6870   offset, giving a 4KB aligned page base address, but with no overflow
6871   checking.
6872 ENUM
6873   BFD_RELOC_AARCH64_ADD_LO12
6874 ENUMDOC
6875   AArch64 ADD immediate instruction, holding bits 0 to 11 of the address.
6876   Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6877 ENUM
6878   BFD_RELOC_AARCH64_LDST8_LO12
6879 ENUMDOC
6880   AArch64 8-bit load/store instruction, holding bits 0 to 11 of the
6881   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6882 ENUM
6883   BFD_RELOC_AARCH64_TSTBR14
6884 ENUMDOC
6885   AArch64 14 bit pc-relative test bit and branch.
6886   The lowest two bits must be zero and are not stored in the instruction,
6887   giving a 16 bit signed byte offset.
6888 ENUM
6889   BFD_RELOC_AARCH64_BRANCH19
6890 ENUMDOC
6891   AArch64 19 bit pc-relative conditional branch and compare & branch.
6892   The lowest two bits must be zero and are not stored in the instruction,
6893   giving a 21 bit signed byte offset.
6894 ENUM
6895   BFD_RELOC_AARCH64_JUMP26
6896 ENUMDOC
6897   AArch64 26 bit pc-relative unconditional branch.
6898   The lowest two bits must be zero and are not stored in the instruction,
6899   giving a 28 bit signed byte offset.
6900 ENUM
6901   BFD_RELOC_AARCH64_CALL26
6902 ENUMDOC
6903   AArch64 26 bit pc-relative unconditional branch and link.
6904   The lowest two bits must be zero and are not stored in the instruction,
6905   giving a 28 bit signed byte offset.
6906 ENUM
6907   BFD_RELOC_AARCH64_LDST16_LO12
6908 ENUMDOC
6909   AArch64 16-bit load/store instruction, holding bits 0 to 11 of the
6910   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6911 ENUM
6912   BFD_RELOC_AARCH64_LDST32_LO12
6913 ENUMDOC
6914   AArch64 32-bit load/store instruction, holding bits 0 to 11 of the
6915   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6916 ENUM
6917   BFD_RELOC_AARCH64_LDST64_LO12
6918 ENUMDOC
6919   AArch64 64-bit load/store instruction, holding bits 0 to 11 of the
6920   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6921 ENUM
6922   BFD_RELOC_AARCH64_LDST128_LO12
6923 ENUMDOC
6924   AArch64 128-bit load/store instruction, holding bits 0 to 11 of the
6925   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6926 ENUM
6927   BFD_RELOC_AARCH64_GOT_LD_PREL19
6928 ENUMDOC
6929   AArch64 Load Literal instruction, holding a 19 bit PC relative word
6930   offset of the global offset table entry for a symbol.  The lowest two
6931   bits must be zero and are not stored in the instruction, giving a 21
6932   bit signed byte offset.  This relocation type requires signed overflow
6933   checking.
6934 ENUM
6935   BFD_RELOC_AARCH64_ADR_GOT_PAGE
6936 ENUMDOC
6937   Get to the page base of the global offset table entry for a symbol as
6938   part of an ADRP instruction using a 21 bit PC relative value.Used in
6939   conjunction with BFD_RELOC_AARCH64_LD64_GOT_LO12_NC.
6940 ENUM
6941   BFD_RELOC_AARCH64_LD64_GOT_LO12_NC
6942 ENUMDOC
6943   Unsigned 12 bit byte offset for 64 bit load/store from the page of
6944   the GOT entry for this symbol.  Used in conjunction with
6945   BFD_RELOC_AARCH64_ADR_GOTPAGE.  Valid in LP64 ABI only.
6946 ENUM
6947   BFD_RELOC_AARCH64_LD32_GOT_LO12_NC
6948 ENUMDOC
6949   Unsigned 12 bit byte offset for 32 bit load/store from the page of
6950   the GOT entry for this symbol.  Used in conjunction with
6951   BFD_RELOC_AARCH64_ADR_GOTPAGE.  Valid in ILP32 ABI only.
6952  ENUM
6953   BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC
6954 ENUMDOC
6955   Unsigned 16 bit byte offset for 64 bit load/store from the GOT entry
6956   for this symbol.  Valid in LP64 ABI only.
6957 ENUM
6958   BFD_RELOC_AARCH64_MOVW_GOTOFF_G1
6959 ENUMDOC
6960   Unsigned 16 bit byte higher offset for 64 bit load/store from the GOT entry
6961   for this symbol.  Valid in LP64 ABI only.
6962 ENUM
6963   BFD_RELOC_AARCH64_LD64_GOTOFF_LO15
6964 ENUMDOC
6965   Unsigned 15 bit byte offset for 64 bit load/store from the page of
6966   the GOT entry for this symbol.  Valid in LP64 ABI only.
6967 ENUM
6968   BFD_RELOC_AARCH64_LD32_GOTPAGE_LO14
6969 ENUMDOC
6970   Scaled 14 bit byte offset to the page base of the global offset table.
6971 ENUM
6972   BFD_RELOC_AARCH64_LD64_GOTPAGE_LO15
6973 ENUMDOC
6974   Scaled 15 bit byte offset to the page base of the global offset table.
6975 ENUM
6976   BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21
6977 ENUMDOC
6978   Get to the page base of the global offset table entry for a symbols
6979   tls_index structure as part of an adrp instruction using a 21 bit PC
6980   relative value.  Used in conjunction with
6981   BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC.
6982 ENUM
6983   BFD_RELOC_AARCH64_TLSGD_ADR_PREL21
6984 ENUMDOC
6985   AArch64 TLS General Dynamic
6986 ENUM
6987   BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC
6988 ENUMDOC
6989   Unsigned 12 bit byte offset to global offset table entry for a symbols
6990   tls_index structure.  Used in conjunction with
6991   BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21.
6992 ENUM
6993   BFD_RELOC_AARCH64_TLSGD_MOVW_G0_NC
6994 ENUMDOC
6995   AArch64 TLS General Dynamic relocation.
6996 ENUM
6997   BFD_RELOC_AARCH64_TLSGD_MOVW_G1
6998 ENUMDOC
6999   AArch64 TLS General Dynamic relocation.
7000 ENUM
7001   BFD_RELOC_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21
7002 ENUMDOC
7003   AArch64 TLS INITIAL EXEC relocation.
7004 ENUM
7005   BFD_RELOC_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC
7006 ENUMDOC
7007   AArch64 TLS INITIAL EXEC relocation.
7008 ENUM
7009   BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC
7010 ENUMDOC
7011   AArch64 TLS INITIAL EXEC relocation.
7012 ENUM
7013   BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19
7014 ENUMDOC
7015   AArch64 TLS INITIAL EXEC relocation.
7016 ENUM
7017   BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G0_NC
7018 ENUMDOC
7019   AArch64 TLS INITIAL EXEC relocation.
7020 ENUM
7021   BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G1
7022 ENUMDOC
7023   AArch64 TLS INITIAL EXEC relocation.
7024 ENUM
7025   BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_HI12
7026 ENUMDOC
7027   bit[23:12] of byte offset to module TLS base address.
7028 ENUM
7029   BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12
7030 ENUMDOC
7031   Unsigned 12 bit byte offset to module TLS base address.
7032 ENUM
7033   BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC
7034 ENUMDOC
7035   No overflow check version of BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12.
7036 ENUM
7037   BFD_RELOC_AARCH64_TLSLD_ADD_LO12_NC
7038 ENUMDOC
7039   Unsigned 12 bit byte offset to global offset table entry for a symbols
7040   tls_index structure.  Used in conjunction with
7041   BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21.
7042 ENUM
7043   BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21
7044 ENUMDOC
7045   GOT entry page address for AArch64 TLS Local Dynamic, used with ADRP
7046   instruction.
7047 ENUM
7048   BFD_RELOC_AARCH64_TLSLD_ADR_PREL21
7049 ENUMDOC
7050   GOT entry address for AArch64 TLS Local Dynamic, used with ADR instruction.
7051 ENUM
7052   BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12
7053 ENUMDOC
7054   bit[11:1] of byte offset to module TLS base address, encoded in ldst
7055   instructions.
7056 ENUM
7057   BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12_NC
7058 ENUMDOC
7059   Similar as BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12, but no overflow check.
7060 ENUM
7061   BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12
7062 ENUMDOC
7063   bit[11:2] of byte offset to module TLS base address, encoded in ldst
7064   instructions.
7065 ENUM
7066   BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12_NC
7067 ENUMDOC
7068   Similar as BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12, but no overflow check.
7069 ENUM
7070   BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12
7071 ENUMDOC
7072   bit[11:3] of byte offset to module TLS base address, encoded in ldst
7073   instructions.
7074 ENUM
7075   BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12_NC
7076 ENUMDOC
7077   Similar as BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12, but no overflow check.
7078 ENUM
7079   BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12
7080 ENUMDOC
7081   bit[11:0] of byte offset to module TLS base address, encoded in ldst
7082   instructions.
7083 ENUM
7084   BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12_NC
7085 ENUMDOC
7086   Similar as BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12, but no overflow check.
7087 ENUM
7088   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0
7089 ENUMDOC
7090   bit[15:0] of byte offset to module TLS base address.
7091 ENUM
7092   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0_NC
7093 ENUMDOC
7094   No overflow check version of BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0
7095 ENUM
7096   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1
7097 ENUMDOC
7098   bit[31:16] of byte offset to module TLS base address.
7099 ENUM
7100   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1_NC
7101 ENUMDOC
7102   No overflow check version of BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1
7103 ENUM
7104   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G2
7105 ENUMDOC
7106   bit[47:32] of byte offset to module TLS base address.
7107 ENUM
7108   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G2
7109 ENUMDOC
7110   AArch64 TLS LOCAL EXEC relocation.
7111 ENUM
7112   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1
7113 ENUMDOC
7114   AArch64 TLS LOCAL EXEC relocation.
7115 ENUM
7116   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1_NC
7117 ENUMDOC
7118   AArch64 TLS LOCAL EXEC relocation.
7119 ENUM
7120   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0
7121 ENUMDOC
7122   AArch64 TLS LOCAL EXEC relocation.
7123 ENUM
7124   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0_NC
7125 ENUMDOC
7126   AArch64 TLS LOCAL EXEC relocation.
7127 ENUM
7128   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_HI12
7129 ENUMDOC
7130   AArch64 TLS LOCAL EXEC relocation.
7131 ENUM
7132   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12
7133 ENUMDOC
7134   AArch64 TLS LOCAL EXEC relocation.
7135 ENUM
7136   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12_NC
7137 ENUMDOC
7138   AArch64 TLS LOCAL EXEC relocation.
7139 ENUM
7140   BFD_RELOC_AARCH64_TLSDESC_LD_PREL19
7141 ENUMDOC
7142   AArch64 TLS DESC relocation.
7143 ENUM
7144   BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21
7145 ENUMDOC
7146   AArch64 TLS DESC relocation.
7147 ENUM
7148   BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21
7149 ENUMDOC
7150   AArch64 TLS DESC relocation.
7151 ENUM
7152   BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC
7153 ENUMDOC
7154   AArch64 TLS DESC relocation.
7155 ENUM
7156   BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC
7157 ENUMDOC
7158   AArch64 TLS DESC relocation.
7159 ENUM
7160   BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC
7161 ENUMDOC
7162   AArch64 TLS DESC relocation.
7163 ENUM
7164   BFD_RELOC_AARCH64_TLSDESC_OFF_G1
7165 ENUMDOC
7166   AArch64 TLS DESC relocation.
7167 ENUM
7168   BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC
7169 ENUMDOC
7170   AArch64 TLS DESC relocation.
7171 ENUM
7172   BFD_RELOC_AARCH64_TLSDESC_LDR
7173 ENUMDOC
7174   AArch64 TLS DESC relocation.
7175 ENUM
7176   BFD_RELOC_AARCH64_TLSDESC_ADD
7177 ENUMDOC
7178   AArch64 TLS DESC relocation.
7179 ENUM
7180   BFD_RELOC_AARCH64_TLSDESC_CALL
7181 ENUMDOC
7182   AArch64 TLS DESC relocation.
7183 ENUM
7184   BFD_RELOC_AARCH64_COPY
7185 ENUMDOC
7186   AArch64 TLS relocation.
7187 ENUM
7188   BFD_RELOC_AARCH64_GLOB_DAT
7189 ENUMDOC
7190   AArch64 TLS relocation.
7191 ENUM
7192   BFD_RELOC_AARCH64_JUMP_SLOT
7193 ENUMDOC
7194   AArch64 TLS relocation.
7195 ENUM
7196   BFD_RELOC_AARCH64_RELATIVE
7197 ENUMDOC
7198   AArch64 TLS relocation.
7199 ENUM
7200   BFD_RELOC_AARCH64_TLS_DTPMOD
7201 ENUMDOC
7202   AArch64 TLS relocation.
7203 ENUM
7204   BFD_RELOC_AARCH64_TLS_DTPREL
7205 ENUMDOC
7206   AArch64 TLS relocation.
7207 ENUM
7208   BFD_RELOC_AARCH64_TLS_TPREL
7209 ENUMDOC
7210   AArch64 TLS relocation.
7211 ENUM
7212   BFD_RELOC_AARCH64_TLSDESC
7213 ENUMDOC
7214   AArch64 TLS relocation.
7215 ENUM
7216   BFD_RELOC_AARCH64_IRELATIVE
7217 ENUMDOC
7218   AArch64 support for STT_GNU_IFUNC.
7219 ENUM
7220   BFD_RELOC_AARCH64_RELOC_END
7221 ENUMDOC
7222   AArch64 pseudo relocation code to mark the end of the AArch64
7223   relocation enumerators that have direct mapping to ELF reloc codes.
7224   There are a few more enumerators after this one; those are mainly
7225   used by the AArch64 assembler for the internal fixup or to select
7226   one of the above enumerators.
7227 ENUM
7228   BFD_RELOC_AARCH64_GAS_INTERNAL_FIXUP
7229 ENUMDOC
7230   AArch64 pseudo relocation code to be used internally by the AArch64
7231   assembler and not (currently) written to any object files.
7232 ENUM
7233   BFD_RELOC_AARCH64_LDST_LO12
7234 ENUMDOC
7235   AArch64 unspecified load/store instruction, holding bits 0 to 11 of the
7236   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7237 ENUM
7238   BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12
7239 ENUMDOC
7240   AArch64 pseudo relocation code for TLS local dynamic mode.  It's to be
7241   used internally by the AArch64 assembler and not (currently) written to
7242   any object files.
7243 ENUM
7244   BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12_NC
7245 ENUMDOC
7246   Similar as BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12, but no overflow check.
7247 ENUM
7248   BFD_RELOC_AARCH64_LD_GOT_LO12_NC
7249 ENUMDOC
7250   AArch64 pseudo relocation code to be used internally by the AArch64
7251   assembler and not (currently) written to any object files.
7252 ENUM
7253   BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC
7254 ENUMDOC
7255   AArch64 pseudo relocation code to be used internally by the AArch64
7256   assembler and not (currently) written to any object files.
7257 ENUM
7258   BFD_RELOC_AARCH64_TLSDESC_LD_LO12_NC
7259 ENUMDOC
7260   AArch64 pseudo relocation code to be used internally by the AArch64
7261   assembler and not (currently) written to any object files.
7262 ENUM
7263   BFD_RELOC_TILEPRO_COPY
7264 ENUMX
7265   BFD_RELOC_TILEPRO_GLOB_DAT
7266 ENUMX
7267   BFD_RELOC_TILEPRO_JMP_SLOT
7268 ENUMX
7269   BFD_RELOC_TILEPRO_RELATIVE
7270 ENUMX
7271   BFD_RELOC_TILEPRO_BROFF_X1
7272 ENUMX
7273   BFD_RELOC_TILEPRO_JOFFLONG_X1
7274 ENUMX
7275   BFD_RELOC_TILEPRO_JOFFLONG_X1_PLT
7276 ENUMX
7277   BFD_RELOC_TILEPRO_IMM8_X0
7278 ENUMX
7279   BFD_RELOC_TILEPRO_IMM8_Y0
7280 ENUMX
7281   BFD_RELOC_TILEPRO_IMM8_X1
7282 ENUMX
7283   BFD_RELOC_TILEPRO_IMM8_Y1
7284 ENUMX
7285   BFD_RELOC_TILEPRO_DEST_IMM8_X1
7286 ENUMX
7287   BFD_RELOC_TILEPRO_MT_IMM15_X1
7288 ENUMX
7289   BFD_RELOC_TILEPRO_MF_IMM15_X1
7290 ENUMX
7291   BFD_RELOC_TILEPRO_IMM16_X0
7292 ENUMX
7293   BFD_RELOC_TILEPRO_IMM16_X1
7294 ENUMX
7295   BFD_RELOC_TILEPRO_IMM16_X0_LO
7296 ENUMX
7297   BFD_RELOC_TILEPRO_IMM16_X1_LO
7298 ENUMX
7299   BFD_RELOC_TILEPRO_IMM16_X0_HI
7300 ENUMX
7301   BFD_RELOC_TILEPRO_IMM16_X1_HI
7302 ENUMX
7303   BFD_RELOC_TILEPRO_IMM16_X0_HA
7304 ENUMX
7305   BFD_RELOC_TILEPRO_IMM16_X1_HA
7306 ENUMX
7307   BFD_RELOC_TILEPRO_IMM16_X0_PCREL
7308 ENUMX
7309   BFD_RELOC_TILEPRO_IMM16_X1_PCREL
7310 ENUMX
7311   BFD_RELOC_TILEPRO_IMM16_X0_LO_PCREL
7312 ENUMX
7313   BFD_RELOC_TILEPRO_IMM16_X1_LO_PCREL
7314 ENUMX
7315   BFD_RELOC_TILEPRO_IMM16_X0_HI_PCREL
7316 ENUMX
7317   BFD_RELOC_TILEPRO_IMM16_X1_HI_PCREL
7318 ENUMX
7319   BFD_RELOC_TILEPRO_IMM16_X0_HA_PCREL
7320 ENUMX
7321   BFD_RELOC_TILEPRO_IMM16_X1_HA_PCREL
7322 ENUMX
7323   BFD_RELOC_TILEPRO_IMM16_X0_GOT
7324 ENUMX
7325   BFD_RELOC_TILEPRO_IMM16_X1_GOT
7326 ENUMX
7327   BFD_RELOC_TILEPRO_IMM16_X0_GOT_LO
7328 ENUMX
7329   BFD_RELOC_TILEPRO_IMM16_X1_GOT_LO
7330 ENUMX
7331   BFD_RELOC_TILEPRO_IMM16_X0_GOT_HI
7332 ENUMX
7333   BFD_RELOC_TILEPRO_IMM16_X1_GOT_HI
7334 ENUMX
7335   BFD_RELOC_TILEPRO_IMM16_X0_GOT_HA
7336 ENUMX
7337   BFD_RELOC_TILEPRO_IMM16_X1_GOT_HA
7338 ENUMX
7339   BFD_RELOC_TILEPRO_MMSTART_X0
7340 ENUMX
7341   BFD_RELOC_TILEPRO_MMEND_X0
7342 ENUMX
7343   BFD_RELOC_TILEPRO_MMSTART_X1
7344 ENUMX
7345   BFD_RELOC_TILEPRO_MMEND_X1
7346 ENUMX
7347   BFD_RELOC_TILEPRO_SHAMT_X0
7348 ENUMX
7349   BFD_RELOC_TILEPRO_SHAMT_X1
7350 ENUMX
7351   BFD_RELOC_TILEPRO_SHAMT_Y0
7352 ENUMX
7353   BFD_RELOC_TILEPRO_SHAMT_Y1
7354 ENUMX
7355   BFD_RELOC_TILEPRO_TLS_GD_CALL
7356 ENUMX
7357   BFD_RELOC_TILEPRO_IMM8_X0_TLS_GD_ADD
7358 ENUMX
7359   BFD_RELOC_TILEPRO_IMM8_X1_TLS_GD_ADD
7360 ENUMX
7361   BFD_RELOC_TILEPRO_IMM8_Y0_TLS_GD_ADD
7362 ENUMX
7363   BFD_RELOC_TILEPRO_IMM8_Y1_TLS_GD_ADD
7364 ENUMX
7365   BFD_RELOC_TILEPRO_TLS_IE_LOAD
7366 ENUMX
7367   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD
7368 ENUMX
7369   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD
7370 ENUMX
7371   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_LO
7372 ENUMX
7373   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_LO
7374 ENUMX
7375   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HI
7376 ENUMX
7377   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HI
7378 ENUMX
7379   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HA
7380 ENUMX
7381   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HA
7382 ENUMX
7383   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE
7384 ENUMX
7385   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE
7386 ENUMX
7387   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_LO
7388 ENUMX
7389   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_LO
7390 ENUMX
7391   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HI
7392 ENUMX
7393   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HI
7394 ENUMX
7395   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HA
7396 ENUMX
7397   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HA
7398 ENUMX
7399   BFD_RELOC_TILEPRO_TLS_DTPMOD32
7400 ENUMX
7401   BFD_RELOC_TILEPRO_TLS_DTPOFF32
7402 ENUMX
7403   BFD_RELOC_TILEPRO_TLS_TPOFF32
7404 ENUMX
7405   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE
7406 ENUMX
7407   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE
7408 ENUMX
7409   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_LO
7410 ENUMX
7411   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_LO
7412 ENUMX
7413   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HI
7414 ENUMX
7415   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HI
7416 ENUMX
7417   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HA
7418 ENUMX
7419   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HA
7420 ENUMDOC
7421   Tilera TILEPro Relocations.
7422 ENUM
7423   BFD_RELOC_TILEGX_HW0
7424 ENUMX
7425   BFD_RELOC_TILEGX_HW1
7426 ENUMX
7427   BFD_RELOC_TILEGX_HW2
7428 ENUMX
7429   BFD_RELOC_TILEGX_HW3
7430 ENUMX
7431   BFD_RELOC_TILEGX_HW0_LAST
7432 ENUMX
7433   BFD_RELOC_TILEGX_HW1_LAST
7434 ENUMX
7435   BFD_RELOC_TILEGX_HW2_LAST
7436 ENUMX
7437   BFD_RELOC_TILEGX_COPY
7438 ENUMX
7439   BFD_RELOC_TILEGX_GLOB_DAT
7440 ENUMX
7441   BFD_RELOC_TILEGX_JMP_SLOT
7442 ENUMX
7443   BFD_RELOC_TILEGX_RELATIVE
7444 ENUMX
7445   BFD_RELOC_TILEGX_BROFF_X1
7446 ENUMX
7447   BFD_RELOC_TILEGX_JUMPOFF_X1
7448 ENUMX
7449   BFD_RELOC_TILEGX_JUMPOFF_X1_PLT
7450 ENUMX
7451   BFD_RELOC_TILEGX_IMM8_X0
7452 ENUMX
7453   BFD_RELOC_TILEGX_IMM8_Y0
7454 ENUMX
7455   BFD_RELOC_TILEGX_IMM8_X1
7456 ENUMX
7457   BFD_RELOC_TILEGX_IMM8_Y1
7458 ENUMX
7459   BFD_RELOC_TILEGX_DEST_IMM8_X1
7460 ENUMX
7461   BFD_RELOC_TILEGX_MT_IMM14_X1
7462 ENUMX
7463   BFD_RELOC_TILEGX_MF_IMM14_X1
7464 ENUMX
7465   BFD_RELOC_TILEGX_MMSTART_X0
7466 ENUMX
7467   BFD_RELOC_TILEGX_MMEND_X0
7468 ENUMX
7469   BFD_RELOC_TILEGX_SHAMT_X0
7470 ENUMX
7471   BFD_RELOC_TILEGX_SHAMT_X1
7472 ENUMX
7473   BFD_RELOC_TILEGX_SHAMT_Y0
7474 ENUMX
7475   BFD_RELOC_TILEGX_SHAMT_Y1
7476 ENUMX
7477   BFD_RELOC_TILEGX_IMM16_X0_HW0
7478 ENUMX
7479   BFD_RELOC_TILEGX_IMM16_X1_HW0
7480 ENUMX
7481   BFD_RELOC_TILEGX_IMM16_X0_HW1
7482 ENUMX
7483   BFD_RELOC_TILEGX_IMM16_X1_HW1
7484 ENUMX
7485   BFD_RELOC_TILEGX_IMM16_X0_HW2
7486 ENUMX
7487   BFD_RELOC_TILEGX_IMM16_X1_HW2
7488 ENUMX
7489   BFD_RELOC_TILEGX_IMM16_X0_HW3
7490 ENUMX
7491   BFD_RELOC_TILEGX_IMM16_X1_HW3
7492 ENUMX
7493   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST
7494 ENUMX
7495   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST
7496 ENUMX
7497   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST
7498 ENUMX
7499   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST
7500 ENUMX
7501   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST
7502 ENUMX
7503   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST
7504 ENUMX
7505   BFD_RELOC_TILEGX_IMM16_X0_HW0_PCREL
7506 ENUMX
7507   BFD_RELOC_TILEGX_IMM16_X1_HW0_PCREL
7508 ENUMX
7509   BFD_RELOC_TILEGX_IMM16_X0_HW1_PCREL
7510 ENUMX
7511   BFD_RELOC_TILEGX_IMM16_X1_HW1_PCREL
7512 ENUMX
7513   BFD_RELOC_TILEGX_IMM16_X0_HW2_PCREL
7514 ENUMX
7515   BFD_RELOC_TILEGX_IMM16_X1_HW2_PCREL
7516 ENUMX
7517   BFD_RELOC_TILEGX_IMM16_X0_HW3_PCREL
7518 ENUMX
7519   BFD_RELOC_TILEGX_IMM16_X1_HW3_PCREL
7520 ENUMX
7521   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PCREL
7522 ENUMX
7523   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PCREL
7524 ENUMX
7525   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PCREL
7526 ENUMX
7527   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PCREL
7528 ENUMX
7529   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PCREL
7530 ENUMX
7531   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PCREL
7532 ENUMX
7533   BFD_RELOC_TILEGX_IMM16_X0_HW0_GOT
7534 ENUMX
7535   BFD_RELOC_TILEGX_IMM16_X1_HW0_GOT
7536 ENUMX
7537   BFD_RELOC_TILEGX_IMM16_X0_HW0_PLT_PCREL
7538 ENUMX
7539   BFD_RELOC_TILEGX_IMM16_X1_HW0_PLT_PCREL
7540 ENUMX
7541   BFD_RELOC_TILEGX_IMM16_X0_HW1_PLT_PCREL
7542 ENUMX
7543   BFD_RELOC_TILEGX_IMM16_X1_HW1_PLT_PCREL
7544 ENUMX
7545   BFD_RELOC_TILEGX_IMM16_X0_HW2_PLT_PCREL
7546 ENUMX
7547   BFD_RELOC_TILEGX_IMM16_X1_HW2_PLT_PCREL
7548 ENUMX
7549   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_GOT
7550 ENUMX
7551   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_GOT
7552 ENUMX
7553   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_GOT
7554 ENUMX
7555   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_GOT
7556 ENUMX
7557   BFD_RELOC_TILEGX_IMM16_X0_HW3_PLT_PCREL
7558 ENUMX
7559   BFD_RELOC_TILEGX_IMM16_X1_HW3_PLT_PCREL
7560 ENUMX
7561   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_GD
7562 ENUMX
7563   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_GD
7564 ENUMX
7565   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_LE
7566 ENUMX
7567   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_LE
7568 ENUMX
7569   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_LE
7570 ENUMX
7571   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_LE
7572 ENUMX
7573   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_LE
7574 ENUMX
7575   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_LE
7576 ENUMX
7577   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_GD
7578 ENUMX
7579   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_GD
7580 ENUMX
7581   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_GD
7582 ENUMX
7583   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_GD
7584 ENUMX
7585   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_IE
7586 ENUMX
7587   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_IE
7588 ENUMX
7589   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PLT_PCREL
7590 ENUMX
7591   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PLT_PCREL
7592 ENUMX
7593   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PLT_PCREL
7594 ENUMX
7595   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PLT_PCREL
7596 ENUMX
7597   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PLT_PCREL
7598 ENUMX
7599   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PLT_PCREL
7600 ENUMX
7601   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_IE
7602 ENUMX
7603   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_IE
7604 ENUMX
7605   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_IE
7606 ENUMX
7607   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_IE
7608 ENUMX
7609   BFD_RELOC_TILEGX_TLS_DTPMOD64
7610 ENUMX
7611   BFD_RELOC_TILEGX_TLS_DTPOFF64
7612 ENUMX
7613   BFD_RELOC_TILEGX_TLS_TPOFF64
7614 ENUMX
7615   BFD_RELOC_TILEGX_TLS_DTPMOD32
7616 ENUMX
7617   BFD_RELOC_TILEGX_TLS_DTPOFF32
7618 ENUMX
7619   BFD_RELOC_TILEGX_TLS_TPOFF32
7620 ENUMX
7621   BFD_RELOC_TILEGX_TLS_GD_CALL
7622 ENUMX
7623   BFD_RELOC_TILEGX_IMM8_X0_TLS_GD_ADD
7624 ENUMX
7625   BFD_RELOC_TILEGX_IMM8_X1_TLS_GD_ADD
7626 ENUMX
7627   BFD_RELOC_TILEGX_IMM8_Y0_TLS_GD_ADD
7628 ENUMX
7629   BFD_RELOC_TILEGX_IMM8_Y1_TLS_GD_ADD
7630 ENUMX
7631   BFD_RELOC_TILEGX_TLS_IE_LOAD
7632 ENUMX
7633   BFD_RELOC_TILEGX_IMM8_X0_TLS_ADD
7634 ENUMX
7635   BFD_RELOC_TILEGX_IMM8_X1_TLS_ADD
7636 ENUMX
7637   BFD_RELOC_TILEGX_IMM8_Y0_TLS_ADD
7638 ENUMX
7639   BFD_RELOC_TILEGX_IMM8_Y1_TLS_ADD
7640 ENUMDOC
7641   Tilera TILE-Gx Relocations.
7642
7643 ENUM
7644   BFD_RELOC_EPIPHANY_SIMM8
7645 ENUMDOC
7646   Adapteva EPIPHANY - 8 bit signed pc-relative displacement
7647 ENUM
7648   BFD_RELOC_EPIPHANY_SIMM24
7649 ENUMDOC
7650   Adapteva EPIPHANY - 24 bit signed pc-relative displacement
7651 ENUM
7652   BFD_RELOC_EPIPHANY_HIGH
7653 ENUMDOC
7654   Adapteva EPIPHANY - 16 most-significant bits of absolute address
7655 ENUM
7656   BFD_RELOC_EPIPHANY_LOW
7657 ENUMDOC
7658   Adapteva EPIPHANY - 16 least-significant bits of absolute address
7659 ENUM
7660   BFD_RELOC_EPIPHANY_SIMM11
7661 ENUMDOC
7662   Adapteva EPIPHANY - 11 bit signed number - add/sub immediate
7663 ENUM
7664   BFD_RELOC_EPIPHANY_IMM11
7665 ENUMDOC
7666   Adapteva EPIPHANY - 11 bit sign-magnitude number (ld/st displacement)
7667 ENUM
7668   BFD_RELOC_EPIPHANY_IMM8
7669 ENUMDOC
7670   Adapteva EPIPHANY - 8 bit immediate for 16 bit mov instruction.
7671
7672 ENUM
7673   BFD_RELOC_VISIUM_HI16
7674 ENUMX
7675   BFD_RELOC_VISIUM_LO16
7676 ENUMX
7677   BFD_RELOC_VISIUM_IM16
7678 ENUMX
7679   BFD_RELOC_VISIUM_REL16
7680 ENUMX
7681   BFD_RELOC_VISIUM_HI16_PCREL
7682 ENUMX
7683   BFD_RELOC_VISIUM_LO16_PCREL
7684 ENUMX
7685   BFD_RELOC_VISIUM_IM16_PCREL
7686 ENUMDOC
7687   Visium Relocations.
7688
7689 ENDSENUM
7690   BFD_RELOC_UNUSED
7691 CODE_FRAGMENT
7692 .
7693 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
7694 */
7695
7696 /*
7697 FUNCTION
7698         bfd_reloc_type_lookup
7699         bfd_reloc_name_lookup
7700
7701 SYNOPSIS
7702         reloc_howto_type *bfd_reloc_type_lookup
7703           (bfd *abfd, bfd_reloc_code_real_type code);
7704         reloc_howto_type *bfd_reloc_name_lookup
7705           (bfd *abfd, const char *reloc_name);
7706
7707 DESCRIPTION
7708         Return a pointer to a howto structure which, when
7709         invoked, will perform the relocation @var{code} on data from the
7710         architecture noted.
7711
7712 */
7713
7714 reloc_howto_type *
7715 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
7716 {
7717   return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
7718 }
7719
7720 reloc_howto_type *
7721 bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
7722 {
7723   return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
7724 }
7725
7726 static reloc_howto_type bfd_howto_32 =
7727 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
7728
7729 /*
7730 INTERNAL_FUNCTION
7731         bfd_default_reloc_type_lookup
7732
7733 SYNOPSIS
7734         reloc_howto_type *bfd_default_reloc_type_lookup
7735           (bfd *abfd, bfd_reloc_code_real_type  code);
7736
7737 DESCRIPTION
7738         Provides a default relocation lookup routine for any architecture.
7739
7740 */
7741
7742 reloc_howto_type *
7743 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
7744 {
7745   switch (code)
7746     {
7747     case BFD_RELOC_CTOR:
7748       /* The type of reloc used in a ctor, which will be as wide as the
7749          address - so either a 64, 32, or 16 bitter.  */
7750       switch (bfd_arch_bits_per_address (abfd))
7751         {
7752         case 64:
7753           BFD_FAIL ();
7754         case 32:
7755           return &bfd_howto_32;
7756         case 16:
7757           BFD_FAIL ();
7758         default:
7759           BFD_FAIL ();
7760         }
7761     default:
7762       BFD_FAIL ();
7763     }
7764   return NULL;
7765 }
7766
7767 /*
7768 FUNCTION
7769         bfd_get_reloc_code_name
7770
7771 SYNOPSIS
7772         const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
7773
7774 DESCRIPTION
7775         Provides a printable name for the supplied relocation code.
7776         Useful mainly for printing error messages.
7777 */
7778
7779 const char *
7780 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
7781 {
7782   if (code > BFD_RELOC_UNUSED)
7783     return 0;
7784   return bfd_reloc_code_real_names[code];
7785 }
7786
7787 /*
7788 INTERNAL_FUNCTION
7789         bfd_generic_relax_section
7790
7791 SYNOPSIS
7792         bfd_boolean bfd_generic_relax_section
7793           (bfd *abfd,
7794            asection *section,
7795            struct bfd_link_info *,
7796            bfd_boolean *);
7797
7798 DESCRIPTION
7799         Provides default handling for relaxing for back ends which
7800         don't do relaxing.
7801 */
7802
7803 bfd_boolean
7804 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
7805                            asection *section ATTRIBUTE_UNUSED,
7806                            struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
7807                            bfd_boolean *again)
7808 {
7809   if (bfd_link_relocatable (link_info))
7810     (*link_info->callbacks->einfo)
7811       (_("%P%F: --relax and -r may not be used together\n"));
7812
7813   *again = FALSE;
7814   return TRUE;
7815 }
7816
7817 /*
7818 INTERNAL_FUNCTION
7819         bfd_generic_gc_sections
7820
7821 SYNOPSIS
7822         bfd_boolean bfd_generic_gc_sections
7823           (bfd *, struct bfd_link_info *);
7824
7825 DESCRIPTION
7826         Provides default handling for relaxing for back ends which
7827         don't do section gc -- i.e., does nothing.
7828 */
7829
7830 bfd_boolean
7831 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
7832                          struct bfd_link_info *info ATTRIBUTE_UNUSED)
7833 {
7834   return TRUE;
7835 }
7836
7837 /*
7838 INTERNAL_FUNCTION
7839         bfd_generic_lookup_section_flags
7840
7841 SYNOPSIS
7842         bfd_boolean bfd_generic_lookup_section_flags
7843           (struct bfd_link_info *, struct flag_info *, asection *);
7844
7845 DESCRIPTION
7846         Provides default handling for section flags lookup
7847         -- i.e., does nothing.
7848         Returns FALSE if the section should be omitted, otherwise TRUE.
7849 */
7850
7851 bfd_boolean
7852 bfd_generic_lookup_section_flags (struct bfd_link_info *info ATTRIBUTE_UNUSED,
7853                                   struct flag_info *flaginfo,
7854                                   asection *section ATTRIBUTE_UNUSED)
7855 {
7856   if (flaginfo != NULL)
7857     {
7858       (*_bfd_error_handler) (_("INPUT_SECTION_FLAGS are not supported.\n"));
7859       return FALSE;
7860     }
7861   return TRUE;
7862 }
7863
7864 /*
7865 INTERNAL_FUNCTION
7866         bfd_generic_merge_sections
7867
7868 SYNOPSIS
7869         bfd_boolean bfd_generic_merge_sections
7870           (bfd *, struct bfd_link_info *);
7871
7872 DESCRIPTION
7873         Provides default handling for SEC_MERGE section merging for back ends
7874         which don't have SEC_MERGE support -- i.e., does nothing.
7875 */
7876
7877 bfd_boolean
7878 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
7879                             struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
7880 {
7881   return TRUE;
7882 }
7883
7884 /*
7885 INTERNAL_FUNCTION
7886         bfd_generic_get_relocated_section_contents
7887
7888 SYNOPSIS
7889         bfd_byte *bfd_generic_get_relocated_section_contents
7890           (bfd *abfd,
7891            struct bfd_link_info *link_info,
7892            struct bfd_link_order *link_order,
7893            bfd_byte *data,
7894            bfd_boolean relocatable,
7895            asymbol **symbols);
7896
7897 DESCRIPTION
7898         Provides default handling of relocation effort for back ends
7899         which can't be bothered to do it efficiently.
7900
7901 */
7902
7903 bfd_byte *
7904 bfd_generic_get_relocated_section_contents (bfd *abfd,
7905                                             struct bfd_link_info *link_info,
7906                                             struct bfd_link_order *link_order,
7907                                             bfd_byte *data,
7908                                             bfd_boolean relocatable,
7909                                             asymbol **symbols)
7910 {
7911   bfd *input_bfd = link_order->u.indirect.section->owner;
7912   asection *input_section = link_order->u.indirect.section;
7913   long reloc_size;
7914   arelent **reloc_vector;
7915   long reloc_count;
7916
7917   reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
7918   if (reloc_size < 0)
7919     return NULL;
7920
7921   /* Read in the section.  */
7922   if (!bfd_get_full_section_contents (input_bfd, input_section, &data))
7923     return NULL;
7924
7925   if (reloc_size == 0)
7926     return data;
7927
7928   reloc_vector = (arelent **) bfd_malloc (reloc_size);
7929   if (reloc_vector == NULL)
7930     return NULL;
7931
7932   reloc_count = bfd_canonicalize_reloc (input_bfd,
7933                                         input_section,
7934                                         reloc_vector,
7935                                         symbols);
7936   if (reloc_count < 0)
7937     goto error_return;
7938
7939   if (reloc_count > 0)
7940     {
7941       arelent **parent;
7942       for (parent = reloc_vector; *parent != NULL; parent++)
7943         {
7944           char *error_message = NULL;
7945           asymbol *symbol;
7946           bfd_reloc_status_type r;
7947
7948           symbol = *(*parent)->sym_ptr_ptr;
7949           if (symbol->section && discarded_section (symbol->section))
7950             {
7951               bfd_byte *p;
7952               static reloc_howto_type none_howto
7953                 = HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
7954                          "unused", FALSE, 0, 0, FALSE);
7955
7956               p = data + (*parent)->address * bfd_octets_per_byte (input_bfd);
7957               _bfd_clear_contents ((*parent)->howto, input_bfd, input_section,
7958                                    p);
7959               (*parent)->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
7960               (*parent)->addend = 0;
7961               (*parent)->howto = &none_howto;
7962               r = bfd_reloc_ok;
7963             }
7964           else
7965             r = bfd_perform_relocation (input_bfd,
7966                                         *parent,
7967                                         data,
7968                                         input_section,
7969                                         relocatable ? abfd : NULL,
7970                                         &error_message);
7971
7972           if (relocatable)
7973             {
7974               asection *os = input_section->output_section;
7975
7976               /* A partial link, so keep the relocs.  */
7977               os->orelocation[os->reloc_count] = *parent;
7978               os->reloc_count++;
7979             }
7980
7981           if (r != bfd_reloc_ok)
7982             {
7983               switch (r)
7984                 {
7985                 case bfd_reloc_undefined:
7986                   if (!((*link_info->callbacks->undefined_symbol)
7987                         (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
7988                          input_bfd, input_section, (*parent)->address,
7989                          TRUE)))
7990                     goto error_return;
7991                   break;
7992                 case bfd_reloc_dangerous:
7993                   BFD_ASSERT (error_message != NULL);
7994                   if (!((*link_info->callbacks->reloc_dangerous)
7995                         (link_info, error_message, input_bfd, input_section,
7996                          (*parent)->address)))
7997                     goto error_return;
7998                   break;
7999                 case bfd_reloc_overflow:
8000                   if (!((*link_info->callbacks->reloc_overflow)
8001                         (link_info, NULL,
8002                          bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
8003                          (*parent)->howto->name, (*parent)->addend,
8004                          input_bfd, input_section, (*parent)->address)))
8005                     goto error_return;
8006                   break;
8007                 case bfd_reloc_outofrange:
8008                   /* PR ld/13730:
8009                      This error can result when processing some partially
8010                      complete binaries.  Do not abort, but issue an error
8011                      message instead.  */
8012                   link_info->callbacks->einfo
8013                     (_("%X%P: %B(%A): relocation \"%R\" goes out of range\n"),
8014                      abfd, input_section, * parent);
8015                   goto error_return;
8016
8017                 case bfd_reloc_notsupported:
8018                   /* PR ld/17512
8019                      This error can result when processing a corrupt binary.
8020                      Do not abort.  Issue an error message instead.  */
8021                   link_info->callbacks->einfo
8022                     (_("%X%P: %B(%A): relocation \"%R\" is not supported\n"),
8023                      abfd, input_section, * parent);
8024                   goto error_return;
8025
8026                 default:
8027                   /* PR 17512; file: 90c2a92e.
8028                      Report unexpected results, without aborting.  */
8029                   link_info->callbacks->einfo
8030                     (_("%X%P: %B(%A): relocation \"%R\" returns an unrecognized value %x\n"),
8031                      abfd, input_section, * parent, r);
8032                   break;
8033                 }
8034
8035             }
8036         }
8037     }
8038
8039   free (reloc_vector);
8040   return data;
8041
8042 error_return:
8043   free (reloc_vector);
8044   return NULL;
8045 }