bfd/reloc.c

   1 /* BFD support for handling relocation entries.
   2    Copyright 1990-2013 Free Software Foundation, Inc.
   3    Written by Cygnus Support.
   4
   5    This file is part of BFD, the Binary File Descriptor library.
   6
   7    This program is free software; you can redistribute it and/or modify
   8    it under the terms of the GNU General Public License as published by
   9    the Free Software Foundation; either version 3 of the License, or
  10    (at your option) any later version.
  11
  12    This program is distributed in the hope that it will be useful,
  13    but WITHOUT ANY WARRANTY; without even the implied warranty of
  14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15    GNU General Public License for more details.
  16
  17    You should have received a copy of the GNU General Public License
  18    along with this program; if not, write to the Free Software
  19    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
  20    MA 02110-1301, USA.  */
  21
  22 /*
  23 SECTION
  24         Relocations
  25
  26         BFD maintains relocations in much the same way it maintains
  27         symbols: they are left alone until required, then read in
  28         en-masse and translated into an internal form.  A common
  29         routine <<bfd_perform_relocation>> acts upon the
  30         canonical form to do the fixup.
  31
  32         Relocations are maintained on a per section basis,
  33         while symbols are maintained on a per BFD basis.
  34
  35         All that a back end has to do to fit the BFD interface is to create
  36         a <<struct reloc_cache_entry>> for each relocation
  37         in a particular section, and fill in the right bits of the structures.
  38
  39 @menu
  40 @* typedef arelent::
  41 @* howto manager::
  42 @end menu
  43
  44 */
  45
  46 /* DO compile in the reloc_code name table from libbfd.h.  */
  47 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
  48
  49 #include "sysdep.h"
  50 #include "bfd.h"
  51 #include "bfdlink.h"
  52 #include "libbfd.h"
  53 /*
  54 DOCDD
  55 INODE
  56         typedef arelent, howto manager, Relocations, Relocations
  57
  58 SUBSECTION
  59         typedef arelent
  60
  61         This is the structure of a relocation entry:
  62
  63 CODE_FRAGMENT
  64 .
  65 .typedef enum bfd_reloc_status
  66 .{
  67 .  {* No errors detected.  *}
  68 .  bfd_reloc_ok,
  69 .
  70 .  {* The relocation was performed, but there was an overflow.  *}
  71 .  bfd_reloc_overflow,
  72 .
  73 .  {* The address to relocate was not within the section supplied.  *}
  74 .  bfd_reloc_outofrange,
  75 .
  76 .  {* Used by special functions.  *}
  77 .  bfd_reloc_continue,
  78 .
  79 .  {* Unsupported relocation size requested.  *}
  80 .  bfd_reloc_notsupported,
  81 .
  82 .  {* Unused.  *}
  83 .  bfd_reloc_other,
  84 .
  85 .  {* The symbol to relocate against was undefined.  *}
  86 .  bfd_reloc_undefined,
  87 .
  88 .  {* The relocation was performed, but may not be ok - presently
  89 .     generated only when linking i960 coff files with i960 b.out
  90 .     symbols.  If this type is returned, the error_message argument
  91 .     to bfd_perform_relocation will be set.  *}
  92 .  bfd_reloc_dangerous
  93 . }
  94 . bfd_reloc_status_type;
  95 .
  96 .
  97 .typedef struct reloc_cache_entry
  98 .{
  99 .  {* A pointer into the canonical table of pointers.  *}
 100 .  struct bfd_symbol **sym_ptr_ptr;
 101 .
 102 .  {* offset in section.  *}
 103 .  bfd_size_type address;
 104 .
 105 .  {* addend for relocation value.  *}
 106 .  bfd_vma addend;
 107 .
 108 .  {* Pointer to how to perform the required relocation.  *}
 109 .  reloc_howto_type *howto;
 110 .
 111 .}
 112 .arelent;
 113 .
 114 */
 115
 116 /*
 117 DESCRIPTION
 118
 119         Here is a description of each of the fields within an <<arelent>>:
 120
 121         o <<sym_ptr_ptr>>
 122
 123         The symbol table pointer points to a pointer to the symbol
 124         associated with the relocation request.  It is the pointer
 125         into the table returned by the back end's
 126         <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
 127         referenced through a pointer to a pointer so that tools like
 128         the linker can fix up all the symbols of the same name by
 129         modifying only one pointer. The relocation routine looks in
 130         the symbol and uses the base of the section the symbol is
 131         attached to and the value of the symbol as the initial
 132         relocation offset. If the symbol pointer is zero, then the
 133         section provided is looked up.
 134
 135         o <<address>>
 136
 137         The <<address>> field gives the offset in bytes from the base of
 138         the section data which owns the relocation record to the first
 139         byte of relocatable information. The actual data relocated
 140         will be relative to this point; for example, a relocation
 141         type which modifies the bottom two bytes of a four byte word
 142         would not touch the first byte pointed to in a big endian
 143         world.
 144
 145         o <<addend>>
 146
 147         The <<addend>> is a value provided by the back end to be added (!)
 148         to the relocation offset. Its interpretation is dependent upon
 149         the howto. For example, on the 68k the code:
 150
 151 |        char foo[];
 152 |        main()
 153 |                {
 154 |                return foo[0x12345678];
 155 |                }
 156
 157         Could be compiled into:
 158
 159 |        linkw fp,#-4
 160 |        moveb @@#12345678,d0
 161 |        extbl d0
 162 |        unlk fp
 163 |        rts
 164
 165         This could create a reloc pointing to <<foo>>, but leave the
 166         offset in the data, something like:
 167
 168 |RELOCATION RECORDS FOR [.text]:
 169 |offset   type      value
 170 |00000006 32        _foo
 171 |
 172 |00000000 4e56 fffc          ; linkw fp,#-4
 173 |00000004 1039 1234 5678     ; moveb @@#12345678,d0
 174 |0000000a 49c0               ; extbl d0
 175 |0000000c 4e5e               ; unlk fp
 176 |0000000e 4e75               ; rts
 177
 178         Using coff and an 88k, some instructions don't have enough
 179         space in them to represent the full address range, and
 180         pointers have to be loaded in two parts. So you'd get something like:
 181
 182 |        or.u     r13,r0,hi16(_foo+0x12345678)
 183 |        ld.b     r2,r13,lo16(_foo+0x12345678)
 184 |        jmp      r1
 185
 186         This should create two relocs, both pointing to <<_foo>>, and with
 187         0x12340000 in their addend field. The data would consist of:
 188
 189 |RELOCATION RECORDS FOR [.text]:
 190 |offset   type      value
 191 |00000002 HVRT16    _foo+0x12340000
 192 |00000006 LVRT16    _foo+0x12340000
 193 |
 194 |00000000 5da05678           ; or.u r13,r0,0x5678
 195 |00000004 1c4d5678           ; ld.b r2,r13,0x5678
 196 |00000008 f400c001           ; jmp r1
 197
 198         The relocation routine digs out the value from the data, adds
 199         it to the addend to get the original offset, and then adds the
 200         value of <<_foo>>. Note that all 32 bits have to be kept around
 201         somewhere, to cope with carry from bit 15 to bit 16.
 202
 203         One further example is the sparc and the a.out format. The
 204         sparc has a similar problem to the 88k, in that some
 205         instructions don't have room for an entire offset, but on the
 206         sparc the parts are created in odd sized lumps. The designers of
 207         the a.out format chose to not use the data within the section
 208         for storing part of the offset; all the offset is kept within
 209         the reloc. Anything in the data should be ignored.
 210
 211 |        save %sp,-112,%sp
 212 |        sethi %hi(_foo+0x12345678),%g2
 213 |        ldsb [%g2+%lo(_foo+0x12345678)],%i0
 214 |        ret
 215 |        restore
 216
 217         Both relocs contain a pointer to <<foo>>, and the offsets
 218         contain junk.
 219
 220 |RELOCATION RECORDS FOR [.text]:
 221 |offset   type      value
 222 |00000004 HI22      _foo+0x12345678
 223 |00000008 LO10      _foo+0x12345678
 224 |
 225 |00000000 9de3bf90     ; save %sp,-112,%sp
 226 |00000004 05000000     ; sethi %hi(_foo+0),%g2
 227 |00000008 f048a000     ; ldsb [%g2+%lo(_foo+0)],%i0
 228 |0000000c 81c7e008     ; ret
 229 |00000010 81e80000     ; restore
 230
 231         o <<howto>>
 232
 233         The <<howto>> field can be imagined as a
 234         relocation instruction. It is a pointer to a structure which
 235         contains information on what to do with all of the other
 236         information in the reloc record and data section. A back end
 237         would normally have a relocation instruction set and turn
 238         relocations into pointers to the correct structure on input -
 239         but it would be possible to create each howto field on demand.
 240
 241 */
 242
 243 /*
 244 SUBSUBSECTION
 245         <<enum complain_overflow>>
 246
 247         Indicates what sort of overflow checking should be done when
 248         performing a relocation.
 249
 250 CODE_FRAGMENT
 251 .
 252 .enum complain_overflow
 253 .{
 254 .  {* Do not complain on overflow.  *}
 255 .  complain_overflow_dont,
 256 .
 257 .  {* Complain if the value overflows when considered as a signed
 258 .     number one bit larger than the field.  ie. A bitfield of N bits
 259 .     is allowed to represent -2**n to 2**n-1.  *}
 260 .  complain_overflow_bitfield,
 261 .
 262 .  {* Complain if the value overflows when considered as a signed
 263 .     number.  *}
 264 .  complain_overflow_signed,
 265 .
 266 .  {* Complain if the value overflows when considered as an
 267 .     unsigned number.  *}
 268 .  complain_overflow_unsigned
 269 .};
 270
 271 */
 272
 273 /*
 274 SUBSUBSECTION
 275         <<reloc_howto_type>>
 276
 277         The <<reloc_howto_type>> is a structure which contains all the
 278         information that libbfd needs to know to tie up a back end's data.
 279
 280 CODE_FRAGMENT
 281 .struct bfd_symbol;             {* Forward declaration.  *}
 282 .
 283 .struct reloc_howto_struct
 284 .{
 285 .  {*  The type field has mainly a documentary use - the back end can
 286 .      do what it wants with it, though normally the back end's
 287 .      external idea of what a reloc number is stored
 288 .      in this field.  For example, a PC relative word relocation
 289 .      in a coff environment has the type 023 - because that's
 290 .      what the outside world calls a R_PCRWORD reloc.  *}
 291 .  unsigned int type;
 292 .
 293 .  {*  The value the final relocation is shifted right by.  This drops
 294 .      unwanted data from the relocation.  *}
 295 .  unsigned int rightshift;
 296 .
 297 .  {*  The size of the item to be relocated.  This is *not* a
 298 .      power-of-two measure.  To get the number of bytes operated
 299 .      on by a type of relocation, use bfd_get_reloc_size.  *}
 300 .  int size;
 301 .
 302 .  {*  The number of bits in the item to be relocated.  This is used
 303 .      when doing overflow checking.  *}
 304 .  unsigned int bitsize;
 305 .
 306 .  {*  The relocation is relative to the field being relocated.  *}
 307 .  bfd_boolean pc_relative;
 308 .
 309 .  {*  The bit position of the reloc value in the destination.
 310 .      The relocated value is left shifted by this amount.  *}
 311 .  unsigned int bitpos;
 312 .
 313 .  {* What type of overflow error should be checked for when
 314 .     relocating.  *}
 315 .  enum complain_overflow complain_on_overflow;
 316 .
 317 .  {* If this field is non null, then the supplied function is
 318 .     called rather than the normal function.  This allows really
 319 .     strange relocation methods to be accommodated (e.g., i960 callj
 320 .     instructions).  *}
 321 .  bfd_reloc_status_type (*special_function)
 322 .    (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
 323 .     bfd *, char **);
 324 .
 325 .  {* The textual name of the relocation type.  *}
 326 .  char *name;
 327 .
 328 .  {* Some formats record a relocation addend in the section contents
 329 .     rather than with the relocation.  For ELF formats this is the
 330 .     distinction between USE_REL and USE_RELA (though the code checks
 331 .     for USE_REL == 1/0).  The value of this field is TRUE if the
 332 .     addend is recorded with the section contents; when performing a
 333 .     partial link (ld -r) the section contents (the data) will be
 334 .     modified.  The value of this field is FALSE if addends are
 335 .     recorded with the relocation (in arelent.addend); when performing
 336 .     a partial link the relocation will be modified.
 337 .     All relocations for all ELF USE_RELA targets should set this field
 338 .     to FALSE (values of TRUE should be looked on with suspicion).
 339 .     However, the converse is not true: not all relocations of all ELF
 340 .     USE_REL targets set this field to TRUE.  Why this is so is peculiar
 341 .     to each particular target.  For relocs that aren't used in partial
 342 .     links (e.g. GOT stuff) it doesn't matter what this is set to.  *}
 343 .  bfd_boolean partial_inplace;
 344 .
 345 .  {* src_mask selects the part of the instruction (or data) to be used
 346 .     in the relocation sum.  If the target relocations don't have an
 347 .     addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
 348 .     dst_mask to extract the addend from the section contents.  If
 349 .     relocations do have an addend in the reloc, eg. ELF USE_RELA, this
 350 .     field should be zero.  Non-zero values for ELF USE_RELA targets are
 351 .     bogus as in those cases the value in the dst_mask part of the
 352 .     section contents should be treated as garbage.  *}
 353 .  bfd_vma src_mask;
 354 .
 355 .  {* dst_mask selects which parts of the instruction (or data) are
 356 .     replaced with a relocated value.  *}
 357 .  bfd_vma dst_mask;
 358 .
 359 .  {* When some formats create PC relative instructions, they leave
 360 .     the value of the pc of the place being relocated in the offset
 361 .     slot of the instruction, so that a PC relative relocation can
 362 .     be made just by adding in an ordinary offset (e.g., sun3 a.out).
 363 .     Some formats leave the displacement part of an instruction
 364 .     empty (e.g., m88k bcs); this flag signals the fact.  *}
 365 .  bfd_boolean pcrel_offset;
 366 .};
 367 .
 368 */
 369
 370 /*
 371 FUNCTION
 372         The HOWTO Macro
 373
 374 DESCRIPTION
 375         The HOWTO define is horrible and will go away.
 376
 377 .#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
 378 .  { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
 379
 380 DESCRIPTION
 381         And will be replaced with the totally magic way. But for the
 382         moment, we are compatible, so do it this way.
 383
 384 .#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
 385 .  HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
 386 .         NAME, FALSE, 0, 0, IN)
 387 .
 388
 389 DESCRIPTION
 390         This is used to fill in an empty howto entry in an array.
 391
 392 .#define EMPTY_HOWTO(C) \
 393 .  HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
 394 .         NULL, FALSE, 0, 0, FALSE)
 395 .
 396
 397 DESCRIPTION
 398         Helper routine to turn a symbol into a relocation value.
 399
 400 .#define HOWTO_PREPARE(relocation, symbol)               \
 401 .  {                                                     \
 402 .    if (symbol != NULL)                                 \
 403 .      {                                                 \
 404 .        if (bfd_is_com_section (symbol->section))       \
 405 .          {                                             \
 406 .            relocation = 0;                             \
 407 .          }                                             \
 408 .        else                                            \
 409 .          {                                             \
 410 .            relocation = symbol->value;                 \
 411 .          }                                             \
 412 .      }                                                 \
 413 .  }
 414 .
 415 */
 416
 417 /*
 418 FUNCTION
 419         bfd_get_reloc_size
 420
 421 SYNOPSIS
 422         unsigned int bfd_get_reloc_size (reloc_howto_type *);
 423
 424 DESCRIPTION
 425         For a reloc_howto_type that operates on a fixed number of bytes,
 426         this returns the number of bytes operated on.
 427  */
 428
 429 unsigned int
 430 bfd_get_reloc_size (reloc_howto_type *howto)
 431 {
 432   switch (howto->size)
 433     {
 434     case 0: return 1;
 435     case 1: return 2;
 436     case 2: return 4;
 437     case 3: return 0;
 438     case 4: return 8;
 439     case 8: return 16;
 440     case -2: return 4;
 441     default: abort ();
 442     }
 443 }
 444
 445 /*
 446 TYPEDEF
 447         arelent_chain
 448
 449 DESCRIPTION
 450
 451         How relocs are tied together in an <<asection>>:
 452
 453 .typedef struct relent_chain
 454 .{
 455 .  arelent relent;
 456 .  struct relent_chain *next;
 457 .}
 458 .arelent_chain;
 459 .
 460 */
 461
 462 /* N_ONES produces N one bits, without overflowing machine arithmetic.  */
 463 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
 464
 465 /*
 466 FUNCTION
 467         bfd_check_overflow
 468
 469 SYNOPSIS
 470         bfd_reloc_status_type bfd_check_overflow
 471           (enum complain_overflow how,
 472            unsigned int bitsize,
 473            unsigned int rightshift,
 474            unsigned int addrsize,
 475            bfd_vma relocation);
 476
 477 DESCRIPTION
 478         Perform overflow checking on @var{relocation} which has
 479         @var{bitsize} significant bits and will be shifted right by
 480         @var{rightshift} bits, on a machine with addresses containing
 481         @var{addrsize} significant bits.  The result is either of
 482         @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
 483
 484 */
 485
 486 bfd_reloc_status_type
 487 bfd_check_overflow (enum complain_overflow how,
 488                     unsigned int bitsize,
 489                     unsigned int rightshift,
 490                     unsigned int addrsize,
 491                     bfd_vma relocation)
 492 {
 493   bfd_vma fieldmask, addrmask, signmask, ss, a;
 494   bfd_reloc_status_type flag = bfd_reloc_ok;
 495
 496   /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
 497      we'll be permissive: extra bits in the field mask will
 498      automatically extend the address mask for purposes of the
 499      overflow check.  */
 500   fieldmask = N_ONES (bitsize);
 501   signmask = ~fieldmask;
 502   addrmask = N_ONES (addrsize) | (fieldmask << rightshift);
 503   a = (relocation & addrmask) >> rightshift;
 504
 505   switch (how)
 506     {
 507     case complain_overflow_dont:
 508       break;
 509
 510     case complain_overflow_signed:
 511       /* If any sign bits are set, all sign bits must be set.  That
 512          is, A must be a valid negative address after shifting.  */
 513       signmask = ~ (fieldmask >> 1);
 514       /* Fall thru */
 515
 516     case complain_overflow_bitfield:
 517       /* Bitfields are sometimes signed, sometimes unsigned.  We
 518          explicitly allow an address wrap too, which means a bitfield
 519          of n bits is allowed to store -2**n to 2**n-1.  Thus overflow
 520          if the value has some, but not all, bits set outside the
 521          field.  */
 522       ss = a & signmask;
 523       if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
 524         flag = bfd_reloc_overflow;
 525       break;
 526
 527     case complain_overflow_unsigned:
 528       /* We have an overflow if the address does not fit in the field.  */
 529       if ((a & signmask) != 0)
 530         flag = bfd_reloc_overflow;
 531       break;
 532
 533     default:
 534       abort ();
 535     }
 536
 537   return flag;
 538 }
 539
 540 /*
 541 FUNCTION
 542         bfd_perform_relocation
 543
 544 SYNOPSIS
 545         bfd_reloc_status_type bfd_perform_relocation
 546           (bfd *abfd,
 547            arelent *reloc_entry,
 548            void *data,
 549            asection *input_section,
 550            bfd *output_bfd,
 551            char **error_message);
 552
 553 DESCRIPTION
 554         If @var{output_bfd} is supplied to this function, the
 555         generated image will be relocatable; the relocations are
 556         copied to the output file after they have been changed to
 557         reflect the new state of the world. There are two ways of
 558         reflecting the results of partial linkage in an output file:
 559         by modifying the output data in place, and by modifying the
 560         relocation record.  Some native formats (e.g., basic a.out and
 561         basic coff) have no way of specifying an addend in the
 562         relocation type, so the addend has to go in the output data.
 563         This is no big deal since in these formats the output data
 564         slot will always be big enough for the addend. Complex reloc
 565         types with addends were invented to solve just this problem.
 566         The @var{error_message} argument is set to an error message if
 567         this return @code{bfd_reloc_dangerous}.
 568
 569 */
 570
 571 bfd_reloc_status_type
 572 bfd_perform_relocation (bfd *abfd,
 573                         arelent *reloc_entry,
 574                         void *data,
 575                         asection *input_section,
 576                         bfd *output_bfd,
 577                         char **error_message)
 578 {
 579   bfd_vma relocation;
 580   bfd_reloc_status_type flag = bfd_reloc_ok;
 581   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 582   bfd_vma output_base = 0;
 583   reloc_howto_type *howto = reloc_entry->howto;
 584   asection *reloc_target_output_section;
 585   asymbol *symbol;
 586
 587   symbol = *(reloc_entry->sym_ptr_ptr);
 588   if (bfd_is_abs_section (symbol->section)
 589       && output_bfd != NULL)
 590     {
 591       reloc_entry->address += input_section->output_offset;
 592       return bfd_reloc_ok;
 593     }
 594
 595   /* If we are not producing relocatable output, return an error if
 596      the symbol is not defined.  An undefined weak symbol is
 597      considered to have a value of zero (SVR4 ABI, p. 4-27).  */
 598   if (bfd_is_und_section (symbol->section)
 599       && (symbol->flags & BSF_WEAK) == 0
 600       && output_bfd == NULL)
 601     flag = bfd_reloc_undefined;
 602
 603   /* If there is a function supplied to handle this relocation type,
 604      call it.  It'll return `bfd_reloc_continue' if further processing
 605      can be done.  */
 606   if (howto->special_function)
 607     {
 608       bfd_reloc_status_type cont;
 609       cont = howto->special_function (abfd, reloc_entry, symbol, data,
 610                                       input_section, output_bfd,
 611                                       error_message);
 612       if (cont != bfd_reloc_continue)
 613         return cont;
 614     }
 615
 616   /* Is the address of the relocation really within the section?  */
 617   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
 618     return bfd_reloc_outofrange;
 619
 620   /* Work out which section the relocation is targeted at and the
 621      initial relocation command value.  */
 622
 623   /* Get symbol value.  (Common symbols are special.)  */
 624   if (bfd_is_com_section (symbol->section))
 625     relocation = 0;
 626   else
 627     relocation = symbol->value;
 628
 629   reloc_target_output_section = symbol->section->output_section;
 630
 631   /* Convert input-section-relative symbol value to absolute.  */
 632   if ((output_bfd && ! howto->partial_inplace)
 633       || reloc_target_output_section == NULL)
 634     output_base = 0;
 635   else
 636     output_base = reloc_target_output_section->vma;
 637
 638   relocation += output_base + symbol->section->output_offset;
 639
 640   /* Add in supplied addend.  */
 641   relocation += reloc_entry->addend;
 642
 643   /* Here the variable relocation holds the final address of the
 644      symbol we are relocating against, plus any addend.  */
 645
 646   if (howto->pc_relative)
 647     {
 648       /* This is a PC relative relocation.  We want to set RELOCATION
 649          to the distance between the address of the symbol and the
 650          location.  RELOCATION is already the address of the symbol.
 651
 652          We start by subtracting the address of the section containing
 653          the location.
 654
 655          If pcrel_offset is set, we must further subtract the position
 656          of the location within the section.  Some targets arrange for
 657          the addend to be the negative of the position of the location
 658          within the section; for example, i386-aout does this.  For
 659          i386-aout, pcrel_offset is FALSE.  Some other targets do not
 660          include the position of the location; for example, m88kbcs,
 661          or ELF.  For those targets, pcrel_offset is TRUE.
 662
 663          If we are producing relocatable output, then we must ensure
 664          that this reloc will be correctly computed when the final
 665          relocation is done.  If pcrel_offset is FALSE we want to wind
 666          up with the negative of the location within the section,
 667          which means we must adjust the existing addend by the change
 668          in the location within the section.  If pcrel_offset is TRUE
 669          we do not want to adjust the existing addend at all.
 670
 671          FIXME: This seems logical to me, but for the case of
 672          producing relocatable output it is not what the code
 673          actually does.  I don't want to change it, because it seems
 674          far too likely that something will break.  */
 675
 676       relocation -=
 677         input_section->output_section->vma + input_section->output_offset;
 678
 679       if (howto->pcrel_offset)
 680         relocation -= reloc_entry->address;
 681     }
 682
 683   if (output_bfd != NULL)
 684     {
 685       if (! howto->partial_inplace)
 686         {
 687           /* This is a partial relocation, and we want to apply the relocation
 688              to the reloc entry rather than the raw data. Modify the reloc
 689              inplace to reflect what we now know.  */
 690           reloc_entry->addend = relocation;
 691           reloc_entry->address += input_section->output_offset;
 692           return flag;
 693         }
 694       else
 695         {
 696           /* This is a partial relocation, but inplace, so modify the
 697              reloc record a bit.
 698
 699              If we've relocated with a symbol with a section, change
 700              into a ref to the section belonging to the symbol.  */
 701
 702           reloc_entry->address += input_section->output_offset;
 703
 704           /* WTF?? */
 705           if (abfd->xvec->flavour == bfd_target_coff_flavour
 706               && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
 707               && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
 708             {
 709               /* For m68k-coff, the addend was being subtracted twice during
 710                  relocation with -r.  Removing the line below this comment
 711                  fixes that problem; see PR 2953.
 712
 713 However, Ian wrote the following, regarding removing the line below,
 714 which explains why it is still enabled:  --djm
 715
 716 If you put a patch like that into BFD you need to check all the COFF
 717 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
 718 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
 719 problem in a different way.  There may very well be a reason that the
 720 code works as it does.
 721
 722 Hmmm.  The first obvious point is that bfd_perform_relocation should
 723 not have any tests that depend upon the flavour.  It's seem like
 724 entirely the wrong place for such a thing.  The second obvious point
 725 is that the current code ignores the reloc addend when producing
 726 relocatable output for COFF.  That's peculiar.  In fact, I really
 727 have no idea what the point of the line you want to remove is.
 728
 729 A typical COFF reloc subtracts the old value of the symbol and adds in
 730 the new value to the location in the object file (if it's a pc
 731 relative reloc it adds the difference between the symbol value and the
 732 location).  When relocating we need to preserve that property.
 733
 734 BFD handles this by setting the addend to the negative of the old
 735 value of the symbol.  Unfortunately it handles common symbols in a
 736 non-standard way (it doesn't subtract the old value) but that's a
 737 different story (we can't change it without losing backward
 738 compatibility with old object files) (coff-i386 does subtract the old
 739 value, to be compatible with existing coff-i386 targets, like SCO).
 740
 741 So everything works fine when not producing relocatable output.  When
 742 we are producing relocatable output, logically we should do exactly
 743 what we do when not producing relocatable output.  Therefore, your
 744 patch is correct.  In fact, it should probably always just set
 745 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
 746 add the value into the object file.  This won't hurt the COFF code,
 747 which doesn't use the addend; I'm not sure what it will do to other
 748 formats (the thing to check for would be whether any formats both use
 749 the addend and set partial_inplace).
 750
 751 When I wanted to make coff-i386 produce relocatable output, I ran
 752 into the problem that you are running into: I wanted to remove that
 753 line.  Rather than risk it, I made the coff-i386 relocs use a special
 754 function; it's coff_i386_reloc in coff-i386.c.  The function
 755 specifically adds the addend field into the object file, knowing that
 756 bfd_perform_relocation is not going to.  If you remove that line, then
 757 coff-i386.c will wind up adding the addend field in twice.  It's
 758 trivial to fix; it just needs to be done.
 759
 760 The problem with removing the line is just that it may break some
 761 working code.  With BFD it's hard to be sure of anything.  The right
 762 way to deal with this is simply to build and test at least all the
 763 supported COFF targets.  It should be straightforward if time and disk
 764 space consuming.  For each target:
 765     1) build the linker
 766     2) generate some executable, and link it using -r (I would
 767        probably use paranoia.o and link against newlib/libc.a, which
 768        for all the supported targets would be available in
 769        /usr/cygnus/progressive/H-host/target/lib/libc.a).
 770     3) make the change to reloc.c
 771     4) rebuild the linker
 772     5) repeat step 2
 773     6) if the resulting object files are the same, you have at least
 774        made it no worse
 775     7) if they are different you have to figure out which version is
 776        right
 777 */
 778               relocation -= reloc_entry->addend;
 779               reloc_entry->addend = 0;
 780             }
 781           else
 782             {
 783               reloc_entry->addend = relocation;
 784             }
 785         }
 786     }
 787   else
 788     {
 789       reloc_entry->addend = 0;
 790     }
 791
 792   /* FIXME: This overflow checking is incomplete, because the value
 793      might have overflowed before we get here.  For a correct check we
 794      need to compute the value in a size larger than bitsize, but we
 795      can't reasonably do that for a reloc the same size as a host
 796      machine word.
 797      FIXME: We should also do overflow checking on the result after
 798      adding in the value contained in the object file.  */
 799   if (howto->complain_on_overflow != complain_overflow_dont
 800       && flag == bfd_reloc_ok)
 801     flag = bfd_check_overflow (howto->complain_on_overflow,
 802                                howto->bitsize,
 803                                howto->rightshift,
 804                                bfd_arch_bits_per_address (abfd),
 805                                relocation);
 806
 807   /* Either we are relocating all the way, or we don't want to apply
 808      the relocation to the reloc entry (probably because there isn't
 809      any room in the output format to describe addends to relocs).  */
 810
 811   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
 812      (OSF version 1.3, compiler version 3.11).  It miscompiles the
 813      following program:
 814
 815      struct str
 816      {
 817        unsigned int i0;
 818      } s = { 0 };
 819
 820      int
 821      main ()
 822      {
 823        unsigned long x;
 824
 825        x = 0x100000000;
 826        x <<= (unsigned long) s.i0;
 827        if (x == 0)
 828          printf ("failed\n");
 829        else
 830          printf ("succeeded (%lx)\n", x);
 831      }
 832      */
 833
 834   relocation >>= (bfd_vma) howto->rightshift;
 835
 836   /* Shift everything up to where it's going to be used.  */
 837   relocation <<= (bfd_vma) howto->bitpos;
 838
 839   /* Wait for the day when all have the mask in them.  */
 840
 841   /* What we do:
 842      i instruction to be left alone
 843      o offset within instruction
 844      r relocation offset to apply
 845      S src mask
 846      D dst mask
 847      N ~dst mask
 848      A part 1
 849      B part 2
 850      R result
 851
 852      Do this:
 853      ((  i i i i i o o o o o  from bfd_get<size>
 854      and           S S S S S) to get the size offset we want
 855      +   r r r r r r r r r r) to get the final value to place
 856      and           D D D D D  to chop to right size
 857      -----------------------
 858      =             A A A A A
 859      And this:
 860      (   i i i i i o o o o o  from bfd_get<size>
 861      and N N N N N          ) get instruction
 862      -----------------------
 863      =   B B B B B
 864
 865      And then:
 866      (   B B B B B
 867      or            A A A A A)
 868      -----------------------
 869      =   R R R R R R R R R R  put into bfd_put<size>
 870      */
 871
 872 #define DOIT(x) \
 873   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
 874
 875   switch (howto->size)
 876     {
 877     case 0:
 878       {
 879         char x = bfd_get_8 (abfd, (char *) data + octets);
 880         DOIT (x);
 881         bfd_put_8 (abfd, x, (unsigned char *) data + octets);
 882       }
 883       break;
 884
 885     case 1:
 886       {
 887         short x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 888         DOIT (x);
 889         bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data + octets);
 890       }
 891       break;
 892     case 2:
 893       {
 894         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 895         DOIT (x);
 896         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 897       }
 898       break;
 899     case -2:
 900       {
 901         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 902         relocation = -relocation;
 903         DOIT (x);
 904         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 905       }
 906       break;
 907
 908     case -1:
 909       {
 910         long x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 911         relocation = -relocation;
 912         DOIT (x);
 913         bfd_put_16 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 914       }
 915       break;
 916
 917     case 3:
 918       /* Do nothing */
 919       break;
 920
 921     case 4:
 922 #ifdef BFD64
 923       {
 924         bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets);
 925         DOIT (x);
 926         bfd_put_64 (abfd, x, (bfd_byte *) data + octets);
 927       }
 928 #else
 929       abort ();
 930 #endif
 931       break;
 932     default:
 933       return bfd_reloc_other;
 934     }
 935
 936   return flag;
 937 }
 938
 939 /*
 940 FUNCTION
 941         bfd_install_relocation
 942
 943 SYNOPSIS
 944         bfd_reloc_status_type bfd_install_relocation
 945           (bfd *abfd,
 946            arelent *reloc_entry,
 947            void *data, bfd_vma data_start,
 948            asection *input_section,
 949            char **error_message);
 950
 951 DESCRIPTION
 952         This looks remarkably like <<bfd_perform_relocation>>, except it
 953         does not expect that the section contents have been filled in.
 954         I.e., it's suitable for use when creating, rather than applying
 955         a relocation.
 956
 957         For now, this function should be considered reserved for the
 958         assembler.
 959 */
 960
 961 bfd_reloc_status_type
 962 bfd_install_relocation (bfd *abfd,
 963                         arelent *reloc_entry,
 964                         void *data_start,
 965                         bfd_vma data_start_offset,
 966                         asection *input_section,
 967                         char **error_message)
 968 {
 969   bfd_vma relocation;
 970   bfd_reloc_status_type flag = bfd_reloc_ok;
 971   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 972   bfd_vma output_base = 0;
 973   reloc_howto_type *howto = reloc_entry->howto;
 974   asection *reloc_target_output_section;
 975   asymbol *symbol;
 976   bfd_byte *data;
 977
 978   symbol = *(reloc_entry->sym_ptr_ptr);
 979   if (bfd_is_abs_section (symbol->section))
 980     {
 981       reloc_entry->address += input_section->output_offset;
 982       return bfd_reloc_ok;
 983     }
 984
 985   /* If there is a function supplied to handle this relocation type,
 986      call it.  It'll return `bfd_reloc_continue' if further processing
 987      can be done.  */
 988   if (howto->special_function)
 989     {
 990       bfd_reloc_status_type cont;
 991
 992       /* XXX - The special_function calls haven't been fixed up to deal
 993          with creating new relocations and section contents.  */
 994       cont = howto->special_function (abfd, reloc_entry, symbol,
 995                                       /* XXX - Non-portable! */
 996                                       ((bfd_byte *) data_start
 997                                        - data_start_offset),
 998                                       input_section, abfd, error_message);
 999       if (cont != bfd_reloc_continue)
1000         return cont;
1001     }
1002
1003   /* Is the address of the relocation really within the section?  */
1004   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
1005     return bfd_reloc_outofrange;
1006
1007   /* Work out which section the relocation is targeted at and the
1008      initial relocation command value.  */
1009
1010   /* Get symbol value.  (Common symbols are special.)  */
1011   if (bfd_is_com_section (symbol->section))
1012     relocation = 0;
1013   else
1014     relocation = symbol->value;
1015
1016   reloc_target_output_section = symbol->section->output_section;
1017
1018   /* Convert input-section-relative symbol value to absolute.  */
1019   if (! howto->partial_inplace)
1020     output_base = 0;
1021   else
1022     output_base = reloc_target_output_section->vma;
1023
1024   relocation += output_base + symbol->section->output_offset;
1025
1026   /* Add in supplied addend.  */
1027   relocation += reloc_entry->addend;
1028
1029   /* Here the variable relocation holds the final address of the
1030      symbol we are relocating against, plus any addend.  */
1031
1032   if (howto->pc_relative)
1033     {
1034       /* This is a PC relative relocation.  We want to set RELOCATION
1035          to the distance between the address of the symbol and the
1036          location.  RELOCATION is already the address of the symbol.
1037
1038          We start by subtracting the address of the section containing
1039          the location.
1040
1041          If pcrel_offset is set, we must further subtract the position
1042          of the location within the section.  Some targets arrange for
1043          the addend to be the negative of the position of the location
1044          within the section; for example, i386-aout does this.  For
1045          i386-aout, pcrel_offset is FALSE.  Some other targets do not
1046          include the position of the location; for example, m88kbcs,
1047          or ELF.  For those targets, pcrel_offset is TRUE.
1048
1049          If we are producing relocatable output, then we must ensure
1050          that this reloc will be correctly computed when the final
1051          relocation is done.  If pcrel_offset is FALSE we want to wind
1052          up with the negative of the location within the section,
1053          which means we must adjust the existing addend by the change
1054          in the location within the section.  If pcrel_offset is TRUE
1055          we do not want to adjust the existing addend at all.
1056
1057          FIXME: This seems logical to me, but for the case of
1058          producing relocatable output it is not what the code
1059          actually does.  I don't want to change it, because it seems
1060          far too likely that something will break.  */
1061
1062       relocation -=
1063         input_section->output_section->vma + input_section->output_offset;
1064
1065       if (howto->pcrel_offset && howto->partial_inplace)
1066         relocation -= reloc_entry->address;
1067     }
1068
1069   if (! howto->partial_inplace)
1070     {
1071       /* This is a partial relocation, and we want to apply the relocation
1072          to the reloc entry rather than the raw data. Modify the reloc
1073          inplace to reflect what we now know.  */
1074       reloc_entry->addend = relocation;
1075       reloc_entry->address += input_section->output_offset;
1076       return flag;
1077     }
1078   else
1079     {
1080       /* This is a partial relocation, but inplace, so modify the
1081          reloc record a bit.
1082
1083          If we've relocated with a symbol with a section, change
1084          into a ref to the section belonging to the symbol.  */
1085       reloc_entry->address += input_section->output_offset;
1086
1087       /* WTF?? */
1088       if (abfd->xvec->flavour == bfd_target_coff_flavour
1089           && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1090           && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1091         {
1092
1093           /* For m68k-coff, the addend was being subtracted twice during
1094              relocation with -r.  Removing the line below this comment
1095              fixes that problem; see PR 2953.
1096
1097 However, Ian wrote the following, regarding removing the line below,
1098 which explains why it is still enabled:  --djm
1099
1100 If you put a patch like that into BFD you need to check all the COFF
1101 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
1102 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1103 problem in a different way.  There may very well be a reason that the
1104 code works as it does.
1105
1106 Hmmm.  The first obvious point is that bfd_install_relocation should
1107 not have any tests that depend upon the flavour.  It's seem like
1108 entirely the wrong place for such a thing.  The second obvious point
1109 is that the current code ignores the reloc addend when producing
1110 relocatable output for COFF.  That's peculiar.  In fact, I really
1111 have no idea what the point of the line you want to remove is.
1112
1113 A typical COFF reloc subtracts the old value of the symbol and adds in
1114 the new value to the location in the object file (if it's a pc
1115 relative reloc it adds the difference between the symbol value and the
1116 location).  When relocating we need to preserve that property.
1117
1118 BFD handles this by setting the addend to the negative of the old
1119 value of the symbol.  Unfortunately it handles common symbols in a
1120 non-standard way (it doesn't subtract the old value) but that's a
1121 different story (we can't change it without losing backward
1122 compatibility with old object files) (coff-i386 does subtract the old
1123 value, to be compatible with existing coff-i386 targets, like SCO).
1124
1125 So everything works fine when not producing relocatable output.  When
1126 we are producing relocatable output, logically we should do exactly
1127 what we do when not producing relocatable output.  Therefore, your
1128 patch is correct.  In fact, it should probably always just set
1129 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1130 add the value into the object file.  This won't hurt the COFF code,
1131 which doesn't use the addend; I'm not sure what it will do to other
1132 formats (the thing to check for would be whether any formats both use
1133 the addend and set partial_inplace).
1134
1135 When I wanted to make coff-i386 produce relocatable output, I ran
1136 into the problem that you are running into: I wanted to remove that
1137 line.  Rather than risk it, I made the coff-i386 relocs use a special
1138 function; it's coff_i386_reloc in coff-i386.c.  The function
1139 specifically adds the addend field into the object file, knowing that
1140 bfd_install_relocation is not going to.  If you remove that line, then
1141 coff-i386.c will wind up adding the addend field in twice.  It's
1142 trivial to fix; it just needs to be done.
1143
1144 The problem with removing the line is just that it may break some
1145 working code.  With BFD it's hard to be sure of anything.  The right
1146 way to deal with this is simply to build and test at least all the
1147 supported COFF targets.  It should be straightforward if time and disk
1148 space consuming.  For each target:
1149     1) build the linker
1150     2) generate some executable, and link it using -r (I would
1151        probably use paranoia.o and link against newlib/libc.a, which
1152        for all the supported targets would be available in
1153        /usr/cygnus/progressive/H-host/target/lib/libc.a).
1154     3) make the change to reloc.c
1155     4) rebuild the linker
1156     5) repeat step 2
1157     6) if the resulting object files are the same, you have at least
1158        made it no worse
1159     7) if they are different you have to figure out which version is
1160        right.  */
1161           relocation -= reloc_entry->addend;
1162           /* FIXME: There should be no target specific code here...  */
1163           if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1164             reloc_entry->addend = 0;
1165         }
1166       else
1167         {
1168           reloc_entry->addend = relocation;
1169         }
1170     }
1171
1172   /* FIXME: This overflow checking is incomplete, because the value
1173      might have overflowed before we get here.  For a correct check we
1174      need to compute the value in a size larger than bitsize, but we
1175      can't reasonably do that for a reloc the same size as a host
1176      machine word.
1177      FIXME: We should also do overflow checking on the result after
1178      adding in the value contained in the object file.  */
1179   if (howto->complain_on_overflow != complain_overflow_dont)
1180     flag = bfd_check_overflow (howto->complain_on_overflow,
1181                                howto->bitsize,
1182                                howto->rightshift,
1183                                bfd_arch_bits_per_address (abfd),
1184                                relocation);
1185
1186   /* Either we are relocating all the way, or we don't want to apply
1187      the relocation to the reloc entry (probably because there isn't
1188      any room in the output format to describe addends to relocs).  */
1189
1190   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1191      (OSF version 1.3, compiler version 3.11).  It miscompiles the
1192      following program:
1193
1194      struct str
1195      {
1196        unsigned int i0;
1197      } s = { 0 };
1198
1199      int
1200      main ()
1201      {
1202        unsigned long x;
1203
1204        x = 0x100000000;
1205        x <<= (unsigned long) s.i0;
1206        if (x == 0)
1207          printf ("failed\n");
1208        else
1209          printf ("succeeded (%lx)\n", x);
1210      }
1211      */
1212
1213   relocation >>= (bfd_vma) howto->rightshift;
1214
1215   /* Shift everything up to where it's going to be used.  */
1216   relocation <<= (bfd_vma) howto->bitpos;
1217
1218   /* Wait for the day when all have the mask in them.  */
1219
1220   /* What we do:
1221      i instruction to be left alone
1222      o offset within instruction
1223      r relocation offset to apply
1224      S src mask
1225      D dst mask
1226      N ~dst mask
1227      A part 1
1228      B part 2
1229      R result
1230
1231      Do this:
1232      ((  i i i i i o o o o o  from bfd_get<size>
1233      and           S S S S S) to get the size offset we want
1234      +   r r r r r r r r r r) to get the final value to place
1235      and           D D D D D  to chop to right size
1236      -----------------------
1237      =             A A A A A
1238      And this:
1239      (   i i i i i o o o o o  from bfd_get<size>
1240      and N N N N N          ) get instruction
1241      -----------------------
1242      =   B B B B B
1243
1244      And then:
1245      (   B B B B B
1246      or            A A A A A)
1247      -----------------------
1248      =   R R R R R R R R R R  put into bfd_put<size>
1249      */
1250
1251 #define DOIT(x) \
1252   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
1253
1254   data = (bfd_byte *) data_start + (octets - data_start_offset);
1255
1256   switch (howto->size)
1257     {
1258     case 0:
1259       {
1260         char x = bfd_get_8 (abfd, data);
1261         DOIT (x);
1262         bfd_put_8 (abfd, x, data);
1263       }
1264       break;
1265
1266     case 1:
1267       {
1268         short x = bfd_get_16 (abfd, data);
1269         DOIT (x);
1270         bfd_put_16 (abfd, (bfd_vma) x, data);
1271       }
1272       break;
1273     case 2:
1274       {
1275         long x = bfd_get_32 (abfd, data);
1276         DOIT (x);
1277         bfd_put_32 (abfd, (bfd_vma) x, data);
1278       }
1279       break;
1280     case -2:
1281       {
1282         long x = bfd_get_32 (abfd, data);
1283         relocation = -relocation;
1284         DOIT (x);
1285         bfd_put_32 (abfd, (bfd_vma) x, data);
1286       }
1287       break;
1288
1289     case 3:
1290       /* Do nothing */
1291       break;
1292
1293     case 4:
1294       {
1295         bfd_vma x = bfd_get_64 (abfd, data);
1296         DOIT (x);
1297         bfd_put_64 (abfd, x, data);
1298       }
1299       break;
1300     default:
1301       return bfd_reloc_other;
1302     }
1303
1304   return flag;
1305 }
1306
1307 /* This relocation routine is used by some of the backend linkers.
1308    They do not construct asymbol or arelent structures, so there is no
1309    reason for them to use bfd_perform_relocation.  Also,
1310    bfd_perform_relocation is so hacked up it is easier to write a new
1311    function than to try to deal with it.
1312
1313    This routine does a final relocation.  Whether it is useful for a
1314    relocatable link depends upon how the object format defines
1315    relocations.
1316
1317    FIXME: This routine ignores any special_function in the HOWTO,
1318    since the existing special_function values have been written for
1319    bfd_perform_relocation.
1320
1321    HOWTO is the reloc howto information.
1322    INPUT_BFD is the BFD which the reloc applies to.
1323    INPUT_SECTION is the section which the reloc applies to.
1324    CONTENTS is the contents of the section.
1325    ADDRESS is the address of the reloc within INPUT_SECTION.
1326    VALUE is the value of the symbol the reloc refers to.
1327    ADDEND is the addend of the reloc.  */
1328
1329 bfd_reloc_status_type
1330 _bfd_final_link_relocate (reloc_howto_type *howto,
1331                           bfd *input_bfd,
1332                           asection *input_section,
1333                           bfd_byte *contents,
1334                           bfd_vma address,
1335                           bfd_vma value,
1336                           bfd_vma addend)
1337 {
1338   bfd_vma relocation;
1339
1340   /* Sanity check the address.  */
1341   if (address > bfd_get_section_limit (input_bfd, input_section))
1342     return bfd_reloc_outofrange;
1343
1344   /* This function assumes that we are dealing with a basic relocation
1345      against a symbol.  We want to compute the value of the symbol to
1346      relocate to.  This is just VALUE, the value of the symbol, plus
1347      ADDEND, any addend associated with the reloc.  */
1348   relocation = value + addend;
1349
1350   /* If the relocation is PC relative, we want to set RELOCATION to
1351      the distance between the symbol (currently in RELOCATION) and the
1352      location we are relocating.  Some targets (e.g., i386-aout)
1353      arrange for the contents of the section to be the negative of the
1354      offset of the location within the section; for such targets
1355      pcrel_offset is FALSE.  Other targets (e.g., m88kbcs or ELF)
1356      simply leave the contents of the section as zero; for such
1357      targets pcrel_offset is TRUE.  If pcrel_offset is FALSE we do not
1358      need to subtract out the offset of the location within the
1359      section (which is just ADDRESS).  */
1360   if (howto->pc_relative)
1361     {
1362       relocation -= (input_section->output_section->vma
1363                      + input_section->output_offset);
1364       if (howto->pcrel_offset)
1365         relocation -= address;
1366     }
1367
1368   return _bfd_relocate_contents (howto, input_bfd, relocation,
1369                                  contents + address);
1370 }
1371
1372 /* Relocate a given location using a given value and howto.  */
1373
1374 bfd_reloc_status_type
1375 _bfd_relocate_contents (reloc_howto_type *howto,
1376                         bfd *input_bfd,
1377                         bfd_vma relocation,
1378                         bfd_byte *location)
1379 {
1380   int size;
1381   bfd_vma x = 0;
1382   bfd_reloc_status_type flag;
1383   unsigned int rightshift = howto->rightshift;
1384   unsigned int bitpos = howto->bitpos;
1385
1386   /* If the size is negative, negate RELOCATION.  This isn't very
1387      general.  */
1388   if (howto->size < 0)
1389     relocation = -relocation;
1390
1391   /* Get the value we are going to relocate.  */
1392   size = bfd_get_reloc_size (howto);
1393   switch (size)
1394     {
1395     default:
1396     case 0:
1397       abort ();
1398     case 1:
1399       x = bfd_get_8 (input_bfd, location);
1400       break;
1401     case 2:
1402       x = bfd_get_16 (input_bfd, location);
1403       break;
1404     case 4:
1405       x = bfd_get_32 (input_bfd, location);
1406       break;
1407     case 8:
1408 #ifdef BFD64
1409       x = bfd_get_64 (input_bfd, location);
1410 #else
1411       abort ();
1412 #endif
1413       break;
1414     }
1415
1416   /* Check for overflow.  FIXME: We may drop bits during the addition
1417      which we don't check for.  We must either check at every single
1418      operation, which would be tedious, or we must do the computations
1419      in a type larger than bfd_vma, which would be inefficient.  */
1420   flag = bfd_reloc_ok;
1421   if (howto->complain_on_overflow != complain_overflow_dont)
1422     {
1423       bfd_vma addrmask, fieldmask, signmask, ss;
1424       bfd_vma a, b, sum;
1425
1426       /* Get the values to be added together.  For signed and unsigned
1427          relocations, we assume that all values should be truncated to
1428          the size of an address.  For bitfields, all the bits matter.
1429          See also bfd_check_overflow.  */
1430       fieldmask = N_ONES (howto->bitsize);
1431       signmask = ~fieldmask;
1432       addrmask = (N_ONES (bfd_arch_bits_per_address (input_bfd))
1433                   | (fieldmask << rightshift));
1434       a = (relocation & addrmask) >> rightshift;
1435       b = (x & howto->src_mask & addrmask) >> bitpos;
1436       addrmask >>= rightshift;
1437
1438       switch (howto->complain_on_overflow)
1439         {
1440         case complain_overflow_signed:
1441           /* If any sign bits are set, all sign bits must be set.
1442              That is, A must be a valid negative address after
1443              shifting.  */
1444           signmask = ~(fieldmask >> 1);
1445           /* Fall thru */
1446
1447         case complain_overflow_bitfield:
1448           /* Much like the signed check, but for a field one bit
1449              wider.  We allow a bitfield to represent numbers in the
1450              range -2**n to 2**n-1, where n is the number of bits in the
1451              field.  Note that when bfd_vma is 32 bits, a 32-bit reloc
1452              can't overflow, which is exactly what we want.  */
1453           ss = a & signmask;
1454           if (ss != 0 && ss != (addrmask & signmask))
1455             flag = bfd_reloc_overflow;
1456
1457           /* We only need this next bit of code if the sign bit of B
1458              is below the sign bit of A.  This would only happen if
1459              SRC_MASK had fewer bits than BITSIZE.  Note that if
1460              SRC_MASK has more bits than BITSIZE, we can get into
1461              trouble; we would need to verify that B is in range, as
1462              we do for A above.  */
1463           ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1464           ss >>= bitpos;
1465
1466           /* Set all the bits above the sign bit.  */
1467           b = (b ^ ss) - ss;
1468
1469           /* Now we can do the addition.  */
1470           sum = a + b;
1471
1472           /* See if the result has the correct sign.  Bits above the
1473              sign bit are junk now; ignore them.  If the sum is
1474              positive, make sure we did not have all negative inputs;
1475              if the sum is negative, make sure we did not have all
1476              positive inputs.  The test below looks only at the sign
1477              bits, and it really just
1478                  SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1479
1480              We mask with addrmask here to explicitly allow an address
1481              wrap-around.  The Linux kernel relies on it, and it is
1482              the only way to write assembler code which can run when
1483              loaded at a location 0x80000000 away from the location at
1484              which it is linked.  */
1485           if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1486             flag = bfd_reloc_overflow;
1487           break;
1488
1489         case complain_overflow_unsigned:
1490           /* Checking for an unsigned overflow is relatively easy:
1491              trim the addresses and add, and trim the result as well.
1492              Overflow is normally indicated when the result does not
1493              fit in the field.  However, we also need to consider the
1494              case when, e.g., fieldmask is 0x7fffffff or smaller, an
1495              input is 0x80000000, and bfd_vma is only 32 bits; then we
1496              will get sum == 0, but there is an overflow, since the
1497              inputs did not fit in the field.  Instead of doing a
1498              separate test, we can check for this by or-ing in the
1499              operands when testing for the sum overflowing its final
1500              field.  */
1501           sum = (a + b) & addrmask;
1502           if ((a | b | sum) & signmask)
1503             flag = bfd_reloc_overflow;
1504           break;
1505
1506         default:
1507           abort ();
1508         }
1509     }
1510
1511   /* Put RELOCATION in the right bits.  */
1512   relocation >>= (bfd_vma) rightshift;
1513   relocation <<= (bfd_vma) bitpos;
1514
1515   /* Add RELOCATION to the right bits of X.  */
1516   x = ((x & ~howto->dst_mask)
1517        | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1518
1519   /* Put the relocated value back in the object file.  */
1520   switch (size)
1521     {
1522     default:
1523       abort ();
1524     case 1:
1525       bfd_put_8 (input_bfd, x, location);
1526       break;
1527     case 2:
1528       bfd_put_16 (input_bfd, x, location);
1529       break;
1530     case 4:
1531       bfd_put_32 (input_bfd, x, location);
1532       break;
1533     case 8:
1534 #ifdef BFD64
1535       bfd_put_64 (input_bfd, x, location);
1536 #else
1537       abort ();
1538 #endif
1539       break;
1540     }
1541
1542   return flag;
1543 }
1544
1545 /* Clear a given location using a given howto, by applying a fixed relocation
1546    value and discarding any in-place addend.  This is used for fixed-up
1547    relocations against discarded symbols, to make ignorable debug or unwind
1548    information more obvious.  */
1549
1550 void
1551 _bfd_clear_contents (reloc_howto_type *howto,
1552                      bfd *input_bfd,
1553                      asection *input_section,
1554                      bfd_byte *location)
1555 {
1556   int size;
1557   bfd_vma x = 0;
1558
1559   /* Get the value we are going to relocate.  */
1560   size = bfd_get_reloc_size (howto);
1561   switch (size)
1562     {
1563     default:
1564     case 0:
1565       abort ();
1566     case 1:
1567       x = bfd_get_8 (input_bfd, location);
1568       break;
1569     case 2:
1570       x = bfd_get_16 (input_bfd, location);
1571       break;
1572     case 4:
1573       x = bfd_get_32 (input_bfd, location);
1574       break;
1575     case 8:
1576 #ifdef BFD64
1577       x = bfd_get_64 (input_bfd, location);
1578 #else
1579       abort ();
1580 #endif
1581       break;
1582     }
1583
1584   /* Zero out the unwanted bits of X.  */
1585   x &= ~howto->dst_mask;
1586
1587   /* For a range list, use 1 instead of 0 as placeholder.  0
1588      would terminate the list, hiding any later entries.  */
1589   if (strcmp (bfd_get_section_name (input_bfd, input_section),
1590               ".debug_ranges") == 0
1591       && (howto->dst_mask & 1) != 0)
1592     x |= 1;
1593
1594   /* Put the relocated value back in the object file.  */
1595   switch (size)
1596     {
1597     default:
1598     case 0:
1599       abort ();
1600     case 1:
1601       bfd_put_8 (input_bfd, x, location);
1602       break;
1603     case 2:
1604       bfd_put_16 (input_bfd, x, location);
1605       break;
1606     case 4:
1607       bfd_put_32 (input_bfd, x, location);
1608       break;
1609     case 8:
1610 #ifdef BFD64
1611       bfd_put_64 (input_bfd, x, location);
1612 #else
1613       abort ();
1614 #endif
1615       break;
1616     }
1617 }
1618
1619 /*
1620 DOCDD
1621 INODE
1622         howto manager,  , typedef arelent, Relocations
1623
1624 SUBSECTION
1625         The howto manager
1626
1627         When an application wants to create a relocation, but doesn't
1628         know what the target machine might call it, it can find out by
1629         using this bit of code.
1630
1631 */
1632
1633 /*
1634 TYPEDEF
1635         bfd_reloc_code_type
1636
1637 DESCRIPTION
1638         The insides of a reloc code.  The idea is that, eventually, there
1639         will be one enumerator for every type of relocation we ever do.
1640         Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1641         return a howto pointer.
1642
1643         This does mean that the application must determine the correct
1644         enumerator value; you can't get a howto pointer from a random set
1645         of attributes.
1646
1647 SENUM
1648    bfd_reloc_code_real
1649
1650 ENUM
1651   BFD_RELOC_64
1652 ENUMX
1653   BFD_RELOC_32
1654 ENUMX
1655   BFD_RELOC_26
1656 ENUMX
1657   BFD_RELOC_24
1658 ENUMX
1659   BFD_RELOC_16
1660 ENUMX
1661   BFD_RELOC_14
1662 ENUMX
1663   BFD_RELOC_8
1664 ENUMDOC
1665   Basic absolute relocations of N bits.
1666
1667 ENUM
1668   BFD_RELOC_64_PCREL
1669 ENUMX
1670   BFD_RELOC_32_PCREL
1671 ENUMX
1672   BFD_RELOC_24_PCREL
1673 ENUMX
1674   BFD_RELOC_16_PCREL
1675 ENUMX
1676   BFD_RELOC_12_PCREL
1677 ENUMX
1678   BFD_RELOC_8_PCREL
1679 ENUMDOC
1680   PC-relative relocations.  Sometimes these are relative to the address
1681 of the relocation itself; sometimes they are relative to the start of
1682 the section containing the relocation.  It depends on the specific target.
1683
1684 The 24-bit relocation is used in some Intel 960 configurations.
1685
1686 ENUM
1687   BFD_RELOC_32_SECREL
1688 ENUMDOC
1689   Section relative relocations.  Some targets need this for DWARF2.
1690
1691 ENUM
1692   BFD_RELOC_32_GOT_PCREL
1693 ENUMX
1694   BFD_RELOC_16_GOT_PCREL
1695 ENUMX
1696   BFD_RELOC_8_GOT_PCREL
1697 ENUMX
1698   BFD_RELOC_32_GOTOFF
1699 ENUMX
1700   BFD_RELOC_16_GOTOFF
1701 ENUMX
1702   BFD_RELOC_LO16_GOTOFF
1703 ENUMX
1704   BFD_RELOC_HI16_GOTOFF
1705 ENUMX
1706   BFD_RELOC_HI16_S_GOTOFF
1707 ENUMX
1708   BFD_RELOC_8_GOTOFF
1709 ENUMX
1710   BFD_RELOC_64_PLT_PCREL
1711 ENUMX
1712   BFD_RELOC_32_PLT_PCREL
1713 ENUMX
1714   BFD_RELOC_24_PLT_PCREL
1715 ENUMX
1716   BFD_RELOC_16_PLT_PCREL
1717 ENUMX
1718   BFD_RELOC_8_PLT_PCREL
1719 ENUMX
1720   BFD_RELOC_64_PLTOFF
1721 ENUMX
1722   BFD_RELOC_32_PLTOFF
1723 ENUMX
1724   BFD_RELOC_16_PLTOFF
1725 ENUMX
1726   BFD_RELOC_LO16_PLTOFF
1727 ENUMX
1728   BFD_RELOC_HI16_PLTOFF
1729 ENUMX
1730   BFD_RELOC_HI16_S_PLTOFF
1731 ENUMX
1732   BFD_RELOC_8_PLTOFF
1733 ENUMDOC
1734   For ELF.
1735
1736 ENUM
1737   BFD_RELOC_SIZE32
1738 ENUMX
1739   BFD_RELOC_SIZE64
1740 ENUMDOC
1741   Size relocations.
1742
1743 ENUM
1744   BFD_RELOC_68K_GLOB_DAT
1745 ENUMX
1746   BFD_RELOC_68K_JMP_SLOT
1747 ENUMX
1748   BFD_RELOC_68K_RELATIVE
1749 ENUMX
1750   BFD_RELOC_68K_TLS_GD32
1751 ENUMX
1752   BFD_RELOC_68K_TLS_GD16
1753 ENUMX
1754   BFD_RELOC_68K_TLS_GD8
1755 ENUMX
1756   BFD_RELOC_68K_TLS_LDM32
1757 ENUMX
1758   BFD_RELOC_68K_TLS_LDM16
1759 ENUMX
1760   BFD_RELOC_68K_TLS_LDM8
1761 ENUMX
1762   BFD_RELOC_68K_TLS_LDO32
1763 ENUMX
1764   BFD_RELOC_68K_TLS_LDO16
1765 ENUMX
1766   BFD_RELOC_68K_TLS_LDO8
1767 ENUMX
1768   BFD_RELOC_68K_TLS_IE32
1769 ENUMX
1770   BFD_RELOC_68K_TLS_IE16
1771 ENUMX
1772   BFD_RELOC_68K_TLS_IE8
1773 ENUMX
1774   BFD_RELOC_68K_TLS_LE32
1775 ENUMX
1776   BFD_RELOC_68K_TLS_LE16
1777 ENUMX
1778   BFD_RELOC_68K_TLS_LE8
1779 ENUMDOC
1780   Relocations used by 68K ELF.
1781
1782 ENUM
1783   BFD_RELOC_32_BASEREL
1784 ENUMX
1785   BFD_RELOC_16_BASEREL
1786 ENUMX
1787   BFD_RELOC_LO16_BASEREL
1788 ENUMX
1789   BFD_RELOC_HI16_BASEREL
1790 ENUMX
1791   BFD_RELOC_HI16_S_BASEREL
1792 ENUMX
1793   BFD_RELOC_8_BASEREL
1794 ENUMX
1795   BFD_RELOC_RVA
1796 ENUMDOC
1797   Linkage-table relative.
1798
1799 ENUM
1800   BFD_RELOC_8_FFnn
1801 ENUMDOC
1802   Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1803
1804 ENUM
1805   BFD_RELOC_32_PCREL_S2
1806 ENUMX
1807   BFD_RELOC_16_PCREL_S2
1808 ENUMX
1809   BFD_RELOC_23_PCREL_S2
1810 ENUMDOC
1811   These PC-relative relocations are stored as word displacements --
1812 i.e., byte displacements shifted right two bits.  The 30-bit word
1813 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1814 SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
1815 signed 16-bit displacement is used on the MIPS, and the 23-bit
1816 displacement is used on the Alpha.
1817
1818 ENUM
1819   BFD_RELOC_HI22
1820 ENUMX
1821   BFD_RELOC_LO10
1822 ENUMDOC
1823   High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1824 the target word.  These are used on the SPARC.
1825
1826 ENUM
1827   BFD_RELOC_GPREL16
1828 ENUMX
1829   BFD_RELOC_GPREL32
1830 ENUMDOC
1831   For systems that allocate a Global Pointer register, these are
1832 displacements off that register.  These relocation types are
1833 handled specially, because the value the register will have is
1834 decided relatively late.
1835
1836 ENUM
1837   BFD_RELOC_I960_CALLJ
1838 ENUMDOC
1839   Reloc types used for i960/b.out.
1840
1841 ENUM
1842   BFD_RELOC_NONE
1843 ENUMX
1844   BFD_RELOC_SPARC_WDISP22
1845 ENUMX
1846   BFD_RELOC_SPARC22
1847 ENUMX
1848   BFD_RELOC_SPARC13
1849 ENUMX
1850   BFD_RELOC_SPARC_GOT10
1851 ENUMX
1852   BFD_RELOC_SPARC_GOT13
1853 ENUMX
1854   BFD_RELOC_SPARC_GOT22
1855 ENUMX
1856   BFD_RELOC_SPARC_PC10
1857 ENUMX
1858   BFD_RELOC_SPARC_PC22
1859 ENUMX
1860   BFD_RELOC_SPARC_WPLT30
1861 ENUMX
1862   BFD_RELOC_SPARC_COPY
1863 ENUMX
1864   BFD_RELOC_SPARC_GLOB_DAT
1865 ENUMX
1866   BFD_RELOC_SPARC_JMP_SLOT
1867 ENUMX
1868   BFD_RELOC_SPARC_RELATIVE
1869 ENUMX
1870   BFD_RELOC_SPARC_UA16
1871 ENUMX
1872   BFD_RELOC_SPARC_UA32
1873 ENUMX
1874   BFD_RELOC_SPARC_UA64
1875 ENUMX
1876   BFD_RELOC_SPARC_GOTDATA_HIX22
1877 ENUMX
1878   BFD_RELOC_SPARC_GOTDATA_LOX10
1879 ENUMX
1880   BFD_RELOC_SPARC_GOTDATA_OP_HIX22
1881 ENUMX
1882   BFD_RELOC_SPARC_GOTDATA_OP_LOX10
1883 ENUMX
1884   BFD_RELOC_SPARC_GOTDATA_OP
1885 ENUMX
1886   BFD_RELOC_SPARC_JMP_IREL
1887 ENUMX
1888   BFD_RELOC_SPARC_IRELATIVE
1889 ENUMDOC
1890   SPARC ELF relocations.  There is probably some overlap with other
1891   relocation types already defined.
1892
1893 ENUM
1894   BFD_RELOC_SPARC_BASE13
1895 ENUMX
1896   BFD_RELOC_SPARC_BASE22
1897 ENUMDOC
1898   I think these are specific to SPARC a.out (e.g., Sun 4).
1899
1900 ENUMEQ
1901   BFD_RELOC_SPARC_64
1902   BFD_RELOC_64
1903 ENUMX
1904   BFD_RELOC_SPARC_10
1905 ENUMX
1906   BFD_RELOC_SPARC_11
1907 ENUMX
1908   BFD_RELOC_SPARC_OLO10
1909 ENUMX
1910   BFD_RELOC_SPARC_HH22
1911 ENUMX
1912   BFD_RELOC_SPARC_HM10
1913 ENUMX
1914   BFD_RELOC_SPARC_LM22
1915 ENUMX
1916   BFD_RELOC_SPARC_PC_HH22
1917 ENUMX
1918   BFD_RELOC_SPARC_PC_HM10
1919 ENUMX
1920   BFD_RELOC_SPARC_PC_LM22
1921 ENUMX
1922   BFD_RELOC_SPARC_WDISP16
1923 ENUMX
1924   BFD_RELOC_SPARC_WDISP19
1925 ENUMX
1926   BFD_RELOC_SPARC_7
1927 ENUMX
1928   BFD_RELOC_SPARC_6
1929 ENUMX
1930   BFD_RELOC_SPARC_5
1931 ENUMEQX
1932   BFD_RELOC_SPARC_DISP64
1933   BFD_RELOC_64_PCREL
1934 ENUMX
1935   BFD_RELOC_SPARC_PLT32
1936 ENUMX
1937   BFD_RELOC_SPARC_PLT64
1938 ENUMX
1939   BFD_RELOC_SPARC_HIX22
1940 ENUMX
1941   BFD_RELOC_SPARC_LOX10
1942 ENUMX
1943   BFD_RELOC_SPARC_H44
1944 ENUMX
1945   BFD_RELOC_SPARC_M44
1946 ENUMX
1947   BFD_RELOC_SPARC_L44
1948 ENUMX
1949   BFD_RELOC_SPARC_REGISTER
1950 ENUMX
1951   BFD_RELOC_SPARC_H34
1952 ENUMX
1953   BFD_RELOC_SPARC_SIZE32
1954 ENUMX
1955   BFD_RELOC_SPARC_SIZE64
1956 ENUMX
1957   BFD_RELOC_SPARC_WDISP10
1958 ENUMDOC
1959   SPARC64 relocations
1960
1961 ENUM
1962   BFD_RELOC_SPARC_REV32
1963 ENUMDOC
1964   SPARC little endian relocation
1965 ENUM
1966   BFD_RELOC_SPARC_TLS_GD_HI22
1967 ENUMX
1968   BFD_RELOC_SPARC_TLS_GD_LO10
1969 ENUMX
1970   BFD_RELOC_SPARC_TLS_GD_ADD
1971 ENUMX
1972   BFD_RELOC_SPARC_TLS_GD_CALL
1973 ENUMX
1974   BFD_RELOC_SPARC_TLS_LDM_HI22
1975 ENUMX
1976   BFD_RELOC_SPARC_TLS_LDM_LO10
1977 ENUMX
1978   BFD_RELOC_SPARC_TLS_LDM_ADD
1979 ENUMX
1980   BFD_RELOC_SPARC_TLS_LDM_CALL
1981 ENUMX
1982   BFD_RELOC_SPARC_TLS_LDO_HIX22
1983 ENUMX
1984   BFD_RELOC_SPARC_TLS_LDO_LOX10
1985 ENUMX
1986   BFD_RELOC_SPARC_TLS_LDO_ADD
1987 ENUMX
1988   BFD_RELOC_SPARC_TLS_IE_HI22
1989 ENUMX
1990   BFD_RELOC_SPARC_TLS_IE_LO10
1991 ENUMX
1992   BFD_RELOC_SPARC_TLS_IE_LD
1993 ENUMX
1994   BFD_RELOC_SPARC_TLS_IE_LDX
1995 ENUMX
1996   BFD_RELOC_SPARC_TLS_IE_ADD
1997 ENUMX
1998   BFD_RELOC_SPARC_TLS_LE_HIX22
1999 ENUMX
2000   BFD_RELOC_SPARC_TLS_LE_LOX10
2001 ENUMX
2002   BFD_RELOC_SPARC_TLS_DTPMOD32
2003 ENUMX
2004   BFD_RELOC_SPARC_TLS_DTPMOD64
2005 ENUMX
2006   BFD_RELOC_SPARC_TLS_DTPOFF32
2007 ENUMX
2008   BFD_RELOC_SPARC_TLS_DTPOFF64
2009 ENUMX
2010   BFD_RELOC_SPARC_TLS_TPOFF32
2011 ENUMX
2012   BFD_RELOC_SPARC_TLS_TPOFF64
2013 ENUMDOC
2014   SPARC TLS relocations
2015
2016 ENUM
2017   BFD_RELOC_SPU_IMM7
2018 ENUMX
2019   BFD_RELOC_SPU_IMM8
2020 ENUMX
2021   BFD_RELOC_SPU_IMM10
2022 ENUMX
2023   BFD_RELOC_SPU_IMM10W
2024 ENUMX
2025   BFD_RELOC_SPU_IMM16
2026 ENUMX
2027   BFD_RELOC_SPU_IMM16W
2028 ENUMX
2029   BFD_RELOC_SPU_IMM18
2030 ENUMX
2031   BFD_RELOC_SPU_PCREL9a
2032 ENUMX
2033   BFD_RELOC_SPU_PCREL9b
2034 ENUMX
2035   BFD_RELOC_SPU_PCREL16
2036 ENUMX
2037   BFD_RELOC_SPU_LO16
2038 ENUMX
2039   BFD_RELOC_SPU_HI16
2040 ENUMX
2041   BFD_RELOC_SPU_PPU32
2042 ENUMX
2043   BFD_RELOC_SPU_PPU64
2044 ENUMX
2045   BFD_RELOC_SPU_ADD_PIC
2046 ENUMDOC
2047   SPU Relocations.
2048
2049 ENUM
2050   BFD_RELOC_ALPHA_GPDISP_HI16
2051 ENUMDOC
2052   Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
2053      "addend" in some special way.
2054   For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
2055      writing; when reading, it will be the absolute section symbol.  The
2056      addend is the displacement in bytes of the "lda" instruction from
2057      the "ldah" instruction (which is at the address of this reloc).
2058 ENUM
2059   BFD_RELOC_ALPHA_GPDISP_LO16
2060 ENUMDOC
2061   For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
2062      with GPDISP_HI16 relocs.  The addend is ignored when writing the
2063      relocations out, and is filled in with the file's GP value on
2064      reading, for convenience.
2065
2066 ENUM
2067   BFD_RELOC_ALPHA_GPDISP
2068 ENUMDOC
2069   The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
2070      relocation except that there is no accompanying GPDISP_LO16
2071      relocation.
2072
2073 ENUM
2074   BFD_RELOC_ALPHA_LITERAL
2075 ENUMX
2076   BFD_RELOC_ALPHA_ELF_LITERAL
2077 ENUMX
2078   BFD_RELOC_ALPHA_LITUSE
2079 ENUMDOC
2080   The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
2081      the assembler turns it into a LDQ instruction to load the address of
2082      the symbol, and then fills in a register in the real instruction.
2083
2084      The LITERAL reloc, at the LDQ instruction, refers to the .lita
2085      section symbol.  The addend is ignored when writing, but is filled
2086      in with the file's GP value on reading, for convenience, as with the
2087      GPDISP_LO16 reloc.
2088
2089      The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2090      It should refer to the symbol to be referenced, as with 16_GOTOFF,
2091      but it generates output not based on the position within the .got
2092      section, but relative to the GP value chosen for the file during the
2093      final link stage.
2094
2095      The LITUSE reloc, on the instruction using the loaded address, gives
2096      information to the linker that it might be able to use to optimize
2097      away some literal section references.  The symbol is ignored (read
2098      as the absolute section symbol), and the "addend" indicates the type
2099      of instruction using the register:
2100               1 - "memory" fmt insn
2101               2 - byte-manipulation (byte offset reg)
2102               3 - jsr (target of branch)
2103
2104 ENUM
2105   BFD_RELOC_ALPHA_HINT
2106 ENUMDOC
2107   The HINT relocation indicates a value that should be filled into the
2108      "hint" field of a jmp/jsr/ret instruction, for possible branch-
2109      prediction logic which may be provided on some processors.
2110
2111 ENUM
2112   BFD_RELOC_ALPHA_LINKAGE
2113 ENUMDOC
2114   The LINKAGE relocation outputs a linkage pair in the object file,
2115      which is filled by the linker.
2116
2117 ENUM
2118   BFD_RELOC_ALPHA_CODEADDR
2119 ENUMDOC
2120   The CODEADDR relocation outputs a STO_CA in the object file,
2121      which is filled by the linker.
2122
2123 ENUM
2124   BFD_RELOC_ALPHA_GPREL_HI16
2125 ENUMX
2126   BFD_RELOC_ALPHA_GPREL_LO16
2127 ENUMDOC
2128   The GPREL_HI/LO relocations together form a 32-bit offset from the
2129      GP register.
2130
2131 ENUM
2132   BFD_RELOC_ALPHA_BRSGP
2133 ENUMDOC
2134   Like BFD_RELOC_23_PCREL_S2, except that the source and target must
2135   share a common GP, and the target address is adjusted for
2136   STO_ALPHA_STD_GPLOAD.
2137
2138 ENUM
2139   BFD_RELOC_ALPHA_NOP
2140 ENUMDOC
2141   The NOP relocation outputs a NOP if the longword displacement
2142      between two procedure entry points is < 2^21.
2143
2144 ENUM
2145   BFD_RELOC_ALPHA_BSR
2146 ENUMDOC
2147   The BSR relocation outputs a BSR if the longword displacement
2148      between two procedure entry points is < 2^21.
2149
2150 ENUM
2151   BFD_RELOC_ALPHA_LDA
2152 ENUMDOC
2153   The LDA relocation outputs a LDA if the longword displacement
2154      between two procedure entry points is < 2^16.
2155
2156 ENUM
2157   BFD_RELOC_ALPHA_BOH
2158 ENUMDOC
2159   The BOH relocation outputs a BSR if the longword displacement
2160      between two procedure entry points is < 2^21, or else a hint.
2161
2162 ENUM
2163   BFD_RELOC_ALPHA_TLSGD
2164 ENUMX
2165   BFD_RELOC_ALPHA_TLSLDM
2166 ENUMX
2167   BFD_RELOC_ALPHA_DTPMOD64
2168 ENUMX
2169   BFD_RELOC_ALPHA_GOTDTPREL16
2170 ENUMX
2171   BFD_RELOC_ALPHA_DTPREL64
2172 ENUMX
2173   BFD_RELOC_ALPHA_DTPREL_HI16
2174 ENUMX
2175   BFD_RELOC_ALPHA_DTPREL_LO16
2176 ENUMX
2177   BFD_RELOC_ALPHA_DTPREL16
2178 ENUMX
2179   BFD_RELOC_ALPHA_GOTTPREL16
2180 ENUMX
2181   BFD_RELOC_ALPHA_TPREL64
2182 ENUMX
2183   BFD_RELOC_ALPHA_TPREL_HI16
2184 ENUMX
2185   BFD_RELOC_ALPHA_TPREL_LO16
2186 ENUMX
2187   BFD_RELOC_ALPHA_TPREL16
2188 ENUMDOC
2189   Alpha thread-local storage relocations.
2190
2191 ENUM
2192   BFD_RELOC_MIPS_JMP
2193 ENUMX
2194   BFD_RELOC_MICROMIPS_JMP
2195 ENUMDOC
2196   The MIPS jump instruction.
2197
2198 ENUM
2199   BFD_RELOC_MIPS16_JMP
2200 ENUMDOC
2201   The MIPS16 jump instruction.
2202
2203 ENUM
2204   BFD_RELOC_MIPS16_GPREL
2205 ENUMDOC
2206   MIPS16 GP relative reloc.
2207
2208 ENUM
2209   BFD_RELOC_HI16
2210 ENUMDOC
2211   High 16 bits of 32-bit value; simple reloc.
2212
2213 ENUM
2214   BFD_RELOC_HI16_S
2215 ENUMDOC
2216   High 16 bits of 32-bit value but the low 16 bits will be sign
2217      extended and added to form the final result.  If the low 16
2218      bits form a negative number, we need to add one to the high value
2219      to compensate for the borrow when the low bits are added.
2220
2221 ENUM
2222   BFD_RELOC_LO16
2223 ENUMDOC
2224   Low 16 bits.
2225
2226 ENUM
2227   BFD_RELOC_HI16_PCREL
2228 ENUMDOC
2229   High 16 bits of 32-bit pc-relative value
2230 ENUM
2231   BFD_RELOC_HI16_S_PCREL
2232 ENUMDOC
2233   High 16 bits of 32-bit pc-relative value, adjusted
2234 ENUM
2235   BFD_RELOC_LO16_PCREL
2236 ENUMDOC
2237   Low 16 bits of pc-relative value
2238
2239 ENUM
2240   BFD_RELOC_MIPS16_GOT16
2241 ENUMX
2242   BFD_RELOC_MIPS16_CALL16
2243 ENUMDOC
2244   Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
2245      16-bit immediate fields
2246 ENUM
2247   BFD_RELOC_MIPS16_HI16
2248 ENUMDOC
2249   MIPS16 high 16 bits of 32-bit value.
2250 ENUM
2251   BFD_RELOC_MIPS16_HI16_S
2252 ENUMDOC
2253   MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2254      extended and added to form the final result.  If the low 16
2255      bits form a negative number, we need to add one to the high value
2256      to compensate for the borrow when the low bits are added.
2257 ENUM
2258   BFD_RELOC_MIPS16_LO16
2259 ENUMDOC
2260   MIPS16 low 16 bits.
2261
2262 ENUM
2263   BFD_RELOC_MIPS16_TLS_GD
2264 ENUMX
2265   BFD_RELOC_MIPS16_TLS_LDM
2266 ENUMX
2267   BFD_RELOC_MIPS16_TLS_DTPREL_HI16
2268 ENUMX
2269   BFD_RELOC_MIPS16_TLS_DTPREL_LO16
2270 ENUMX
2271   BFD_RELOC_MIPS16_TLS_GOTTPREL
2272 ENUMX
2273   BFD_RELOC_MIPS16_TLS_TPREL_HI16
2274 ENUMX
2275   BFD_RELOC_MIPS16_TLS_TPREL_LO16
2276 ENUMDOC
2277   MIPS16 TLS relocations
2278
2279 ENUM
2280   BFD_RELOC_MIPS_LITERAL
2281 ENUMX
2282   BFD_RELOC_MICROMIPS_LITERAL
2283 ENUMDOC
2284   Relocation against a MIPS literal section.
2285
2286 ENUM
2287   BFD_RELOC_MICROMIPS_7_PCREL_S1
2288 ENUMX
2289   BFD_RELOC_MICROMIPS_10_PCREL_S1
2290 ENUMX
2291   BFD_RELOC_MICROMIPS_16_PCREL_S1
2292 ENUMDOC
2293   microMIPS PC-relative relocations.
2294
2295 ENUM
2296   BFD_RELOC_MICROMIPS_GPREL16
2297 ENUMX
2298   BFD_RELOC_MICROMIPS_HI16
2299 ENUMX
2300   BFD_RELOC_MICROMIPS_HI16_S
2301 ENUMX
2302   BFD_RELOC_MICROMIPS_LO16
2303 ENUMDOC
2304   microMIPS versions of generic BFD relocs.
2305
2306 ENUM
2307   BFD_RELOC_MIPS_GOT16
2308 ENUMX
2309   BFD_RELOC_MICROMIPS_GOT16
2310 ENUMX
2311   BFD_RELOC_MIPS_CALL16
2312 ENUMX
2313   BFD_RELOC_MICROMIPS_CALL16
2314 ENUMX
2315   BFD_RELOC_MIPS_GOT_HI16
2316 ENUMX
2317   BFD_RELOC_MICROMIPS_GOT_HI16
2318 ENUMX
2319   BFD_RELOC_MIPS_GOT_LO16
2320 ENUMX
2321   BFD_RELOC_MICROMIPS_GOT_LO16
2322 ENUMX
2323   BFD_RELOC_MIPS_CALL_HI16
2324 ENUMX
2325   BFD_RELOC_MICROMIPS_CALL_HI16
2326 ENUMX
2327   BFD_RELOC_MIPS_CALL_LO16
2328 ENUMX
2329   BFD_RELOC_MICROMIPS_CALL_LO16
2330 ENUMX
2331   BFD_RELOC_MIPS_SUB
2332 ENUMX
2333   BFD_RELOC_MICROMIPS_SUB
2334 ENUMX
2335   BFD_RELOC_MIPS_GOT_PAGE
2336 ENUMX
2337   BFD_RELOC_MICROMIPS_GOT_PAGE
2338 ENUMX
2339   BFD_RELOC_MIPS_GOT_OFST
2340 ENUMX
2341   BFD_RELOC_MICROMIPS_GOT_OFST
2342 ENUMX
2343   BFD_RELOC_MIPS_GOT_DISP
2344 ENUMX
2345   BFD_RELOC_MICROMIPS_GOT_DISP
2346 ENUMX
2347   BFD_RELOC_MIPS_SHIFT5
2348 ENUMX
2349   BFD_RELOC_MIPS_SHIFT6
2350 ENUMX
2351   BFD_RELOC_MIPS_INSERT_A
2352 ENUMX
2353   BFD_RELOC_MIPS_INSERT_B
2354 ENUMX
2355   BFD_RELOC_MIPS_DELETE
2356 ENUMX
2357   BFD_RELOC_MIPS_HIGHEST
2358 ENUMX
2359   BFD_RELOC_MICROMIPS_HIGHEST
2360 ENUMX
2361   BFD_RELOC_MIPS_HIGHER
2362 ENUMX
2363   BFD_RELOC_MICROMIPS_HIGHER
2364 ENUMX
2365   BFD_RELOC_MIPS_SCN_DISP
2366 ENUMX
2367   BFD_RELOC_MICROMIPS_SCN_DISP
2368 ENUMX
2369   BFD_RELOC_MIPS_REL16
2370 ENUMX
2371   BFD_RELOC_MIPS_RELGOT
2372 ENUMX
2373   BFD_RELOC_MIPS_JALR
2374 ENUMX
2375   BFD_RELOC_MICROMIPS_JALR
2376 ENUMX
2377   BFD_RELOC_MIPS_TLS_DTPMOD32
2378 ENUMX
2379   BFD_RELOC_MIPS_TLS_DTPREL32
2380 ENUMX
2381   BFD_RELOC_MIPS_TLS_DTPMOD64
2382 ENUMX
2383   BFD_RELOC_MIPS_TLS_DTPREL64
2384 ENUMX
2385   BFD_RELOC_MIPS_TLS_GD
2386 ENUMX
2387   BFD_RELOC_MICROMIPS_TLS_GD
2388 ENUMX
2389   BFD_RELOC_MIPS_TLS_LDM
2390 ENUMX
2391   BFD_RELOC_MICROMIPS_TLS_LDM
2392 ENUMX
2393   BFD_RELOC_MIPS_TLS_DTPREL_HI16
2394 ENUMX
2395   BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16
2396 ENUMX
2397   BFD_RELOC_MIPS_TLS_DTPREL_LO16
2398 ENUMX
2399   BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16
2400 ENUMX
2401   BFD_RELOC_MIPS_TLS_GOTTPREL
2402 ENUMX
2403   BFD_RELOC_MICROMIPS_TLS_GOTTPREL
2404 ENUMX
2405   BFD_RELOC_MIPS_TLS_TPREL32
2406 ENUMX
2407   BFD_RELOC_MIPS_TLS_TPREL64
2408 ENUMX
2409   BFD_RELOC_MIPS_TLS_TPREL_HI16
2410 ENUMX
2411   BFD_RELOC_MICROMIPS_TLS_TPREL_HI16
2412 ENUMX
2413   BFD_RELOC_MIPS_TLS_TPREL_LO16
2414 ENUMX
2415   BFD_RELOC_MICROMIPS_TLS_TPREL_LO16
2416 ENUMX
2417   BFD_RELOC_MIPS_EH
2418 ENUMDOC
2419   MIPS ELF relocations.
2420 COMMENT
2421
2422 ENUM
2423   BFD_RELOC_MIPS_COPY
2424 ENUMX
2425   BFD_RELOC_MIPS_JUMP_SLOT
2426 ENUMDOC
2427   MIPS ELF relocations (VxWorks and PLT extensions).
2428 COMMENT
2429
2430 ENUM
2431   BFD_RELOC_MOXIE_10_PCREL
2432 ENUMDOC
2433   Moxie ELF relocations.
2434 COMMENT
2435
2436 ENUM
2437   BFD_RELOC_FRV_LABEL16
2438 ENUMX
2439   BFD_RELOC_FRV_LABEL24
2440 ENUMX
2441   BFD_RELOC_FRV_LO16
2442 ENUMX
2443   BFD_RELOC_FRV_HI16
2444 ENUMX
2445   BFD_RELOC_FRV_GPREL12
2446 ENUMX
2447   BFD_RELOC_FRV_GPRELU12
2448 ENUMX
2449   BFD_RELOC_FRV_GPREL32
2450 ENUMX
2451   BFD_RELOC_FRV_GPRELHI
2452 ENUMX
2453   BFD_RELOC_FRV_GPRELLO
2454 ENUMX
2455   BFD_RELOC_FRV_GOT12
2456 ENUMX
2457   BFD_RELOC_FRV_GOTHI
2458 ENUMX
2459   BFD_RELOC_FRV_GOTLO
2460 ENUMX
2461   BFD_RELOC_FRV_FUNCDESC
2462 ENUMX
2463   BFD_RELOC_FRV_FUNCDESC_GOT12
2464 ENUMX
2465   BFD_RELOC_FRV_FUNCDESC_GOTHI
2466 ENUMX
2467   BFD_RELOC_FRV_FUNCDESC_GOTLO
2468 ENUMX
2469   BFD_RELOC_FRV_FUNCDESC_VALUE
2470 ENUMX
2471   BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2472 ENUMX
2473   BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2474 ENUMX
2475   BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2476 ENUMX
2477   BFD_RELOC_FRV_GOTOFF12
2478 ENUMX
2479   BFD_RELOC_FRV_GOTOFFHI
2480 ENUMX
2481   BFD_RELOC_FRV_GOTOFFLO
2482 ENUMX
2483   BFD_RELOC_FRV_GETTLSOFF
2484 ENUMX
2485   BFD_RELOC_FRV_TLSDESC_VALUE
2486 ENUMX
2487   BFD_RELOC_FRV_GOTTLSDESC12
2488 ENUMX
2489   BFD_RELOC_FRV_GOTTLSDESCHI
2490 ENUMX
2491   BFD_RELOC_FRV_GOTTLSDESCLO
2492 ENUMX
2493   BFD_RELOC_FRV_TLSMOFF12
2494 ENUMX
2495   BFD_RELOC_FRV_TLSMOFFHI
2496 ENUMX
2497   BFD_RELOC_FRV_TLSMOFFLO
2498 ENUMX
2499   BFD_RELOC_FRV_GOTTLSOFF12
2500 ENUMX
2501   BFD_RELOC_FRV_GOTTLSOFFHI
2502 ENUMX
2503   BFD_RELOC_FRV_GOTTLSOFFLO
2504 ENUMX
2505   BFD_RELOC_FRV_TLSOFF
2506 ENUMX
2507   BFD_RELOC_FRV_TLSDESC_RELAX
2508 ENUMX
2509   BFD_RELOC_FRV_GETTLSOFF_RELAX
2510 ENUMX
2511   BFD_RELOC_FRV_TLSOFF_RELAX
2512 ENUMX
2513   BFD_RELOC_FRV_TLSMOFF
2514 ENUMDOC
2515   Fujitsu Frv Relocations.
2516 COMMENT
2517
2518 ENUM
2519   BFD_RELOC_MN10300_GOTOFF24
2520 ENUMDOC
2521   This is a 24bit GOT-relative reloc for the mn10300.
2522 ENUM
2523   BFD_RELOC_MN10300_GOT32
2524 ENUMDOC
2525   This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2526   in the instruction.
2527 ENUM
2528   BFD_RELOC_MN10300_GOT24
2529 ENUMDOC
2530   This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2531   in the instruction.
2532 ENUM
2533   BFD_RELOC_MN10300_GOT16
2534 ENUMDOC
2535   This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2536   in the instruction.
2537 ENUM
2538   BFD_RELOC_MN10300_COPY
2539 ENUMDOC
2540   Copy symbol at runtime.
2541 ENUM
2542   BFD_RELOC_MN10300_GLOB_DAT
2543 ENUMDOC
2544   Create GOT entry.
2545 ENUM
2546   BFD_RELOC_MN10300_JMP_SLOT
2547 ENUMDOC
2548   Create PLT entry.
2549 ENUM
2550   BFD_RELOC_MN10300_RELATIVE
2551 ENUMDOC
2552   Adjust by program base.
2553 ENUM
2554   BFD_RELOC_MN10300_SYM_DIFF
2555 ENUMDOC
2556   Together with another reloc targeted at the same location,
2557   allows for a value that is the difference of two symbols
2558   in the same section.
2559 ENUM
2560   BFD_RELOC_MN10300_ALIGN
2561 ENUMDOC
2562   The addend of this reloc is an alignment power that must
2563   be honoured at the offset's location, regardless of linker
2564   relaxation.
2565 ENUM
2566   BFD_RELOC_MN10300_TLS_GD
2567 ENUMX
2568   BFD_RELOC_MN10300_TLS_LD
2569 ENUMX
2570   BFD_RELOC_MN10300_TLS_LDO
2571 ENUMX
2572   BFD_RELOC_MN10300_TLS_GOTIE
2573 ENUMX
2574   BFD_RELOC_MN10300_TLS_IE
2575 ENUMX
2576   BFD_RELOC_MN10300_TLS_LE
2577 ENUMX
2578   BFD_RELOC_MN10300_TLS_DTPMOD
2579 ENUMX
2580   BFD_RELOC_MN10300_TLS_DTPOFF
2581 ENUMX
2582   BFD_RELOC_MN10300_TLS_TPOFF
2583 ENUMDOC
2584   Various TLS-related relocations.
2585 ENUM
2586   BFD_RELOC_MN10300_32_PCREL
2587 ENUMDOC
2588   This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
2589   instruction.
2590 ENUM
2591   BFD_RELOC_MN10300_16_PCREL
2592 ENUMDOC
2593   This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
2594   instruction.
2595 COMMENT
2596
2597 ENUM
2598   BFD_RELOC_386_GOT32
2599 ENUMX
2600   BFD_RELOC_386_PLT32
2601 ENUMX
2602   BFD_RELOC_386_COPY
2603 ENUMX
2604   BFD_RELOC_386_GLOB_DAT
2605 ENUMX
2606   BFD_RELOC_386_JUMP_SLOT
2607 ENUMX
2608   BFD_RELOC_386_RELATIVE
2609 ENUMX
2610   BFD_RELOC_386_GOTOFF
2611 ENUMX
2612   BFD_RELOC_386_GOTPC
2613 ENUMX
2614   BFD_RELOC_386_TLS_TPOFF
2615 ENUMX
2616   BFD_RELOC_386_TLS_IE
2617 ENUMX
2618   BFD_RELOC_386_TLS_GOTIE
2619 ENUMX
2620   BFD_RELOC_386_TLS_LE
2621 ENUMX
2622   BFD_RELOC_386_TLS_GD
2623 ENUMX
2624   BFD_RELOC_386_TLS_LDM
2625 ENUMX
2626   BFD_RELOC_386_TLS_LDO_32
2627 ENUMX
2628   BFD_RELOC_386_TLS_IE_32
2629 ENUMX
2630   BFD_RELOC_386_TLS_LE_32
2631 ENUMX
2632   BFD_RELOC_386_TLS_DTPMOD32
2633 ENUMX
2634   BFD_RELOC_386_TLS_DTPOFF32
2635 ENUMX
2636   BFD_RELOC_386_TLS_TPOFF32
2637 ENUMX
2638   BFD_RELOC_386_TLS_GOTDESC
2639 ENUMX
2640   BFD_RELOC_386_TLS_DESC_CALL
2641 ENUMX
2642   BFD_RELOC_386_TLS_DESC
2643 ENUMX
2644   BFD_RELOC_386_IRELATIVE
2645 ENUMDOC
2646   i386/elf relocations
2647
2648 ENUM
2649   BFD_RELOC_X86_64_GOT32
2650 ENUMX
2651   BFD_RELOC_X86_64_PLT32
2652 ENUMX
2653   BFD_RELOC_X86_64_COPY
2654 ENUMX
2655   BFD_RELOC_X86_64_GLOB_DAT
2656 ENUMX
2657   BFD_RELOC_X86_64_JUMP_SLOT
2658 ENUMX
2659   BFD_RELOC_X86_64_RELATIVE
2660 ENUMX
2661   BFD_RELOC_X86_64_GOTPCREL
2662 ENUMX
2663   BFD_RELOC_X86_64_32S
2664 ENUMX
2665   BFD_RELOC_X86_64_DTPMOD64
2666 ENUMX
2667   BFD_RELOC_X86_64_DTPOFF64
2668 ENUMX
2669   BFD_RELOC_X86_64_TPOFF64
2670 ENUMX
2671   BFD_RELOC_X86_64_TLSGD
2672 ENUMX
2673   BFD_RELOC_X86_64_TLSLD
2674 ENUMX
2675   BFD_RELOC_X86_64_DTPOFF32
2676 ENUMX
2677   BFD_RELOC_X86_64_GOTTPOFF
2678 ENUMX
2679   BFD_RELOC_X86_64_TPOFF32
2680 ENUMX
2681   BFD_RELOC_X86_64_GOTOFF64
2682 ENUMX
2683   BFD_RELOC_X86_64_GOTPC32
2684 ENUMX
2685   BFD_RELOC_X86_64_GOT64
2686 ENUMX
2687   BFD_RELOC_X86_64_GOTPCREL64
2688 ENUMX
2689   BFD_RELOC_X86_64_GOTPC64
2690 ENUMX
2691   BFD_RELOC_X86_64_GOTPLT64
2692 ENUMX
2693   BFD_RELOC_X86_64_PLTOFF64
2694 ENUMX
2695   BFD_RELOC_X86_64_GOTPC32_TLSDESC
2696 ENUMX
2697   BFD_RELOC_X86_64_TLSDESC_CALL
2698 ENUMX
2699   BFD_RELOC_X86_64_TLSDESC
2700 ENUMX
2701   BFD_RELOC_X86_64_IRELATIVE
2702 ENUMDOC
2703   x86-64/elf relocations
2704
2705 ENUM
2706   BFD_RELOC_NS32K_IMM_8
2707 ENUMX
2708   BFD_RELOC_NS32K_IMM_16
2709 ENUMX
2710   BFD_RELOC_NS32K_IMM_32
2711 ENUMX
2712   BFD_RELOC_NS32K_IMM_8_PCREL
2713 ENUMX
2714   BFD_RELOC_NS32K_IMM_16_PCREL
2715 ENUMX
2716   BFD_RELOC_NS32K_IMM_32_PCREL
2717 ENUMX
2718   BFD_RELOC_NS32K_DISP_8
2719 ENUMX
2720   BFD_RELOC_NS32K_DISP_16
2721 ENUMX
2722   BFD_RELOC_NS32K_DISP_32
2723 ENUMX
2724   BFD_RELOC_NS32K_DISP_8_PCREL
2725 ENUMX
2726   BFD_RELOC_NS32K_DISP_16_PCREL
2727 ENUMX
2728   BFD_RELOC_NS32K_DISP_32_PCREL
2729 ENUMDOC
2730   ns32k relocations
2731
2732 ENUM
2733   BFD_RELOC_PDP11_DISP_8_PCREL
2734 ENUMX
2735   BFD_RELOC_PDP11_DISP_6_PCREL
2736 ENUMDOC
2737   PDP11 relocations
2738
2739 ENUM
2740   BFD_RELOC_PJ_CODE_HI16
2741 ENUMX
2742   BFD_RELOC_PJ_CODE_LO16
2743 ENUMX
2744   BFD_RELOC_PJ_CODE_DIR16
2745 ENUMX
2746   BFD_RELOC_PJ_CODE_DIR32
2747 ENUMX
2748   BFD_RELOC_PJ_CODE_REL16
2749 ENUMX
2750   BFD_RELOC_PJ_CODE_REL32
2751 ENUMDOC
2752   Picojava relocs.  Not all of these appear in object files.
2753
2754 ENUM
2755   BFD_RELOC_PPC_B26
2756 ENUMX
2757   BFD_RELOC_PPC_BA26
2758 ENUMX
2759   BFD_RELOC_PPC_TOC16
2760 ENUMX
2761   BFD_RELOC_PPC_B16
2762 ENUMX
2763   BFD_RELOC_PPC_B16_BRTAKEN
2764 ENUMX
2765   BFD_RELOC_PPC_B16_BRNTAKEN
2766 ENUMX
2767   BFD_RELOC_PPC_BA16
2768 ENUMX
2769   BFD_RELOC_PPC_BA16_BRTAKEN
2770 ENUMX
2771   BFD_RELOC_PPC_BA16_BRNTAKEN
2772 ENUMX
2773   BFD_RELOC_PPC_COPY
2774 ENUMX
2775   BFD_RELOC_PPC_GLOB_DAT
2776 ENUMX
2777   BFD_RELOC_PPC_JMP_SLOT
2778 ENUMX
2779   BFD_RELOC_PPC_RELATIVE
2780 ENUMX
2781   BFD_RELOC_PPC_LOCAL24PC
2782 ENUMX
2783   BFD_RELOC_PPC_EMB_NADDR32
2784 ENUMX
2785   BFD_RELOC_PPC_EMB_NADDR16
2786 ENUMX
2787   BFD_RELOC_PPC_EMB_NADDR16_LO
2788 ENUMX
2789   BFD_RELOC_PPC_EMB_NADDR16_HI
2790 ENUMX
2791   BFD_RELOC_PPC_EMB_NADDR16_HA
2792 ENUMX
2793   BFD_RELOC_PPC_EMB_SDAI16
2794 ENUMX
2795   BFD_RELOC_PPC_EMB_SDA2I16
2796 ENUMX
2797   BFD_RELOC_PPC_EMB_SDA2REL
2798 ENUMX
2799   BFD_RELOC_PPC_EMB_SDA21
2800 ENUMX
2801   BFD_RELOC_PPC_EMB_MRKREF
2802 ENUMX
2803   BFD_RELOC_PPC_EMB_RELSEC16
2804 ENUMX
2805   BFD_RELOC_PPC_EMB_RELST_LO
2806 ENUMX
2807   BFD_RELOC_PPC_EMB_RELST_HI
2808 ENUMX
2809   BFD_RELOC_PPC_EMB_RELST_HA
2810 ENUMX
2811   BFD_RELOC_PPC_EMB_BIT_FLD
2812 ENUMX
2813   BFD_RELOC_PPC_EMB_RELSDA
2814 ENUMX
2815   BFD_RELOC_PPC_VLE_REL8
2816 ENUMX
2817   BFD_RELOC_PPC_VLE_REL15
2818 ENUMX
2819   BFD_RELOC_PPC_VLE_REL24
2820 ENUMX
2821   BFD_RELOC_PPC_VLE_LO16A
2822 ENUMX
2823   BFD_RELOC_PPC_VLE_LO16D
2824 ENUMX
2825   BFD_RELOC_PPC_VLE_HI16A
2826 ENUMX
2827   BFD_RELOC_PPC_VLE_HI16D
2828 ENUMX
2829   BFD_RELOC_PPC_VLE_HA16A
2830 ENUMX
2831   BFD_RELOC_PPC_VLE_HA16D
2832 ENUMX
2833   BFD_RELOC_PPC_VLE_SDA21
2834 ENUMX
2835   BFD_RELOC_PPC_VLE_SDA21_LO
2836 ENUMX
2837   BFD_RELOC_PPC_VLE_SDAREL_LO16A
2838 ENUMX
2839   BFD_RELOC_PPC_VLE_SDAREL_LO16D
2840 ENUMX
2841   BFD_RELOC_PPC_VLE_SDAREL_HI16A
2842 ENUMX
2843   BFD_RELOC_PPC_VLE_SDAREL_HI16D
2844 ENUMX
2845   BFD_RELOC_PPC_VLE_SDAREL_HA16A
2846 ENUMX
2847   BFD_RELOC_PPC_VLE_SDAREL_HA16D
2848 ENUMX
2849   BFD_RELOC_PPC64_HIGHER
2850 ENUMX
2851   BFD_RELOC_PPC64_HIGHER_S
2852 ENUMX
2853   BFD_RELOC_PPC64_HIGHEST
2854 ENUMX
2855   BFD_RELOC_PPC64_HIGHEST_S
2856 ENUMX
2857   BFD_RELOC_PPC64_TOC16_LO
2858 ENUMX
2859   BFD_RELOC_PPC64_TOC16_HI
2860 ENUMX
2861   BFD_RELOC_PPC64_TOC16_HA
2862 ENUMX
2863   BFD_RELOC_PPC64_TOC
2864 ENUMX
2865   BFD_RELOC_PPC64_PLTGOT16
2866 ENUMX
2867   BFD_RELOC_PPC64_PLTGOT16_LO
2868 ENUMX
2869   BFD_RELOC_PPC64_PLTGOT16_HI
2870 ENUMX
2871   BFD_RELOC_PPC64_PLTGOT16_HA
2872 ENUMX
2873   BFD_RELOC_PPC64_ADDR16_DS
2874 ENUMX
2875   BFD_RELOC_PPC64_ADDR16_LO_DS
2876 ENUMX
2877   BFD_RELOC_PPC64_GOT16_DS
2878 ENUMX
2879   BFD_RELOC_PPC64_GOT16_LO_DS
2880 ENUMX
2881   BFD_RELOC_PPC64_PLT16_LO_DS
2882 ENUMX
2883   BFD_RELOC_PPC64_SECTOFF_DS
2884 ENUMX
2885   BFD_RELOC_PPC64_SECTOFF_LO_DS
2886 ENUMX
2887   BFD_RELOC_PPC64_TOC16_DS
2888 ENUMX
2889   BFD_RELOC_PPC64_TOC16_LO_DS
2890 ENUMX
2891   BFD_RELOC_PPC64_PLTGOT16_DS
2892 ENUMX
2893   BFD_RELOC_PPC64_PLTGOT16_LO_DS
2894 ENUMX
2895   BFD_RELOC_PPC64_ADDR16_HIGH
2896 ENUMX
2897   BFD_RELOC_PPC64_ADDR16_HIGHA
2898 ENUMDOC
2899   Power(rs6000) and PowerPC relocations.
2900
2901 ENUM
2902   BFD_RELOC_PPC_TLS
2903 ENUMX
2904   BFD_RELOC_PPC_TLSGD
2905 ENUMX
2906   BFD_RELOC_PPC_TLSLD
2907 ENUMX
2908   BFD_RELOC_PPC_DTPMOD
2909 ENUMX
2910   BFD_RELOC_PPC_TPREL16
2911 ENUMX
2912   BFD_RELOC_PPC_TPREL16_LO
2913 ENUMX
2914   BFD_RELOC_PPC_TPREL16_HI
2915 ENUMX
2916   BFD_RELOC_PPC_TPREL16_HA
2917 ENUMX
2918   BFD_RELOC_PPC_TPREL
2919 ENUMX
2920   BFD_RELOC_PPC_DTPREL16
2921 ENUMX
2922   BFD_RELOC_PPC_DTPREL16_LO
2923 ENUMX
2924   BFD_RELOC_PPC_DTPREL16_HI
2925 ENUMX
2926   BFD_RELOC_PPC_DTPREL16_HA
2927 ENUMX
2928   BFD_RELOC_PPC_DTPREL
2929 ENUMX
2930   BFD_RELOC_PPC_GOT_TLSGD16
2931 ENUMX
2932   BFD_RELOC_PPC_GOT_TLSGD16_LO
2933 ENUMX
2934   BFD_RELOC_PPC_GOT_TLSGD16_HI
2935 ENUMX
2936   BFD_RELOC_PPC_GOT_TLSGD16_HA
2937 ENUMX
2938   BFD_RELOC_PPC_GOT_TLSLD16
2939 ENUMX
2940   BFD_RELOC_PPC_GOT_TLSLD16_LO
2941 ENUMX
2942   BFD_RELOC_PPC_GOT_TLSLD16_HI
2943 ENUMX
2944   BFD_RELOC_PPC_GOT_TLSLD16_HA
2945 ENUMX
2946   BFD_RELOC_PPC_GOT_TPREL16
2947 ENUMX
2948   BFD_RELOC_PPC_GOT_TPREL16_LO
2949 ENUMX
2950   BFD_RELOC_PPC_GOT_TPREL16_HI
2951 ENUMX
2952   BFD_RELOC_PPC_GOT_TPREL16_HA
2953 ENUMX
2954   BFD_RELOC_PPC_GOT_DTPREL16
2955 ENUMX
2956   BFD_RELOC_PPC_GOT_DTPREL16_LO
2957 ENUMX
2958   BFD_RELOC_PPC_GOT_DTPREL16_HI
2959 ENUMX
2960   BFD_RELOC_PPC_GOT_DTPREL16_HA
2961 ENUMX
2962   BFD_RELOC_PPC64_TPREL16_DS
2963 ENUMX
2964   BFD_RELOC_PPC64_TPREL16_LO_DS
2965 ENUMX
2966   BFD_RELOC_PPC64_TPREL16_HIGHER
2967 ENUMX
2968   BFD_RELOC_PPC64_TPREL16_HIGHERA
2969 ENUMX
2970   BFD_RELOC_PPC64_TPREL16_HIGHEST
2971 ENUMX
2972   BFD_RELOC_PPC64_TPREL16_HIGHESTA
2973 ENUMX
2974   BFD_RELOC_PPC64_DTPREL16_DS
2975 ENUMX
2976   BFD_RELOC_PPC64_DTPREL16_LO_DS
2977 ENUMX
2978   BFD_RELOC_PPC64_DTPREL16_HIGHER
2979 ENUMX
2980   BFD_RELOC_PPC64_DTPREL16_HIGHERA
2981 ENUMX
2982   BFD_RELOC_PPC64_DTPREL16_HIGHEST
2983 ENUMX
2984   BFD_RELOC_PPC64_DTPREL16_HIGHESTA
2985 ENUMX
2986   BFD_RELOC_PPC64_TPREL16_HIGH
2987 ENUMX
2988   BFD_RELOC_PPC64_TPREL16_HIGHA
2989 ENUMX
2990   BFD_RELOC_PPC64_DTPREL16_HIGH
2991 ENUMX
2992   BFD_RELOC_PPC64_DTPREL16_HIGHA
2993 ENUMDOC
2994   PowerPC and PowerPC64 thread-local storage relocations.
2995
2996 ENUM
2997   BFD_RELOC_I370_D12
2998 ENUMDOC
2999   IBM 370/390 relocations
3000
3001 ENUM
3002   BFD_RELOC_CTOR
3003 ENUMDOC
3004   The type of reloc used to build a constructor table - at the moment
3005   probably a 32 bit wide absolute relocation, but the target can choose.
3006   It generally does map to one of the other relocation types.
3007
3008 ENUM
3009   BFD_RELOC_ARM_PCREL_BRANCH
3010 ENUMDOC
3011   ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
3012   not stored in the instruction.
3013 ENUM
3014   BFD_RELOC_ARM_PCREL_BLX
3015 ENUMDOC
3016   ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
3017   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
3018   field in the instruction.
3019 ENUM
3020   BFD_RELOC_THUMB_PCREL_BLX
3021 ENUMDOC
3022   Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
3023   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
3024   field in the instruction.
3025 ENUM
3026   BFD_RELOC_ARM_PCREL_CALL
3027 ENUMDOC
3028   ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
3029 ENUM
3030   BFD_RELOC_ARM_PCREL_JUMP
3031 ENUMDOC
3032   ARM 26-bit pc-relative branch for B or conditional BL instruction.
3033
3034 ENUM
3035   BFD_RELOC_THUMB_PCREL_BRANCH7
3036 ENUMX
3037   BFD_RELOC_THUMB_PCREL_BRANCH9
3038 ENUMX
3039   BFD_RELOC_THUMB_PCREL_BRANCH12
3040 ENUMX
3041   BFD_RELOC_THUMB_PCREL_BRANCH20
3042 ENUMX
3043   BFD_RELOC_THUMB_PCREL_BRANCH23
3044 ENUMX
3045   BFD_RELOC_THUMB_PCREL_BRANCH25
3046 ENUMDOC
3047   Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
3048   The lowest bit must be zero and is not stored in the instruction.
3049   Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
3050   "nn" one smaller in all cases.  Note further that BRANCH23
3051   corresponds to R_ARM_THM_CALL.
3052
3053 ENUM
3054   BFD_RELOC_ARM_OFFSET_IMM
3055 ENUMDOC
3056   12-bit immediate offset, used in ARM-format ldr and str instructions.
3057
3058 ENUM
3059   BFD_RELOC_ARM_THUMB_OFFSET
3060 ENUMDOC
3061   5-bit immediate offset, used in Thumb-format ldr and str instructions.
3062
3063 ENUM
3064   BFD_RELOC_ARM_TARGET1
3065 ENUMDOC
3066   Pc-relative or absolute relocation depending on target.  Used for
3067   entries in .init_array sections.
3068 ENUM
3069   BFD_RELOC_ARM_ROSEGREL32
3070 ENUMDOC
3071   Read-only segment base relative address.
3072 ENUM
3073   BFD_RELOC_ARM_SBREL32
3074 ENUMDOC
3075   Data segment base relative address.
3076 ENUM
3077   BFD_RELOC_ARM_TARGET2
3078 ENUMDOC
3079   This reloc is used for references to RTTI data from exception handling
3080   tables.  The actual definition depends on the target.  It may be a
3081   pc-relative or some form of GOT-indirect relocation.
3082 ENUM
3083   BFD_RELOC_ARM_PREL31
3084 ENUMDOC
3085   31-bit PC relative address.
3086 ENUM
3087   BFD_RELOC_ARM_MOVW
3088 ENUMX
3089   BFD_RELOC_ARM_MOVT
3090 ENUMX
3091   BFD_RELOC_ARM_MOVW_PCREL
3092 ENUMX
3093   BFD_RELOC_ARM_MOVT_PCREL
3094 ENUMX
3095   BFD_RELOC_ARM_THUMB_MOVW
3096 ENUMX
3097   BFD_RELOC_ARM_THUMB_MOVT
3098 ENUMX
3099   BFD_RELOC_ARM_THUMB_MOVW_PCREL
3100 ENUMX
3101   BFD_RELOC_ARM_THUMB_MOVT_PCREL
3102 ENUMDOC
3103   Low and High halfword relocations for MOVW and MOVT instructions.
3104
3105 ENUM
3106   BFD_RELOC_ARM_JUMP_SLOT
3107 ENUMX
3108   BFD_RELOC_ARM_GLOB_DAT
3109 ENUMX
3110   BFD_RELOC_ARM_GOT32
3111 ENUMX
3112   BFD_RELOC_ARM_PLT32
3113 ENUMX
3114   BFD_RELOC_ARM_RELATIVE
3115 ENUMX
3116   BFD_RELOC_ARM_GOTOFF
3117 ENUMX
3118   BFD_RELOC_ARM_GOTPC
3119 ENUMX
3120   BFD_RELOC_ARM_GOT_PREL
3121 ENUMDOC
3122   Relocations for setting up GOTs and PLTs for shared libraries.
3123
3124 ENUM
3125   BFD_RELOC_ARM_TLS_GD32
3126 ENUMX
3127   BFD_RELOC_ARM_TLS_LDO32
3128 ENUMX
3129   BFD_RELOC_ARM_TLS_LDM32
3130 ENUMX
3131   BFD_RELOC_ARM_TLS_DTPOFF32
3132 ENUMX
3133   BFD_RELOC_ARM_TLS_DTPMOD32
3134 ENUMX
3135   BFD_RELOC_ARM_TLS_TPOFF32
3136 ENUMX
3137   BFD_RELOC_ARM_TLS_IE32
3138 ENUMX
3139   BFD_RELOC_ARM_TLS_LE32
3140 ENUMX
3141   BFD_RELOC_ARM_TLS_GOTDESC
3142 ENUMX
3143   BFD_RELOC_ARM_TLS_CALL
3144 ENUMX
3145   BFD_RELOC_ARM_THM_TLS_CALL
3146 ENUMX
3147   BFD_RELOC_ARM_TLS_DESCSEQ
3148 ENUMX
3149   BFD_RELOC_ARM_THM_TLS_DESCSEQ
3150 ENUMX
3151   BFD_RELOC_ARM_TLS_DESC
3152 ENUMDOC
3153   ARM thread-local storage relocations.
3154
3155 ENUM
3156   BFD_RELOC_ARM_ALU_PC_G0_NC
3157 ENUMX
3158   BFD_RELOC_ARM_ALU_PC_G0
3159 ENUMX
3160   BFD_RELOC_ARM_ALU_PC_G1_NC
3161 ENUMX
3162   BFD_RELOC_ARM_ALU_PC_G1
3163 ENUMX
3164   BFD_RELOC_ARM_ALU_PC_G2
3165 ENUMX
3166   BFD_RELOC_ARM_LDR_PC_G0
3167 ENUMX
3168   BFD_RELOC_ARM_LDR_PC_G1
3169 ENUMX
3170   BFD_RELOC_ARM_LDR_PC_G2
3171 ENUMX
3172   BFD_RELOC_ARM_LDRS_PC_G0
3173 ENUMX
3174   BFD_RELOC_ARM_LDRS_PC_G1
3175 ENUMX
3176   BFD_RELOC_ARM_LDRS_PC_G2
3177 ENUMX
3178   BFD_RELOC_ARM_LDC_PC_G0
3179 ENUMX
3180   BFD_RELOC_ARM_LDC_PC_G1
3181 ENUMX
3182   BFD_RELOC_ARM_LDC_PC_G2
3183 ENUMX
3184   BFD_RELOC_ARM_ALU_SB_G0_NC
3185 ENUMX
3186   BFD_RELOC_ARM_ALU_SB_G0
3187 ENUMX
3188   BFD_RELOC_ARM_ALU_SB_G1_NC
3189 ENUMX
3190   BFD_RELOC_ARM_ALU_SB_G1
3191 ENUMX
3192   BFD_RELOC_ARM_ALU_SB_G2
3193 ENUMX
3194   BFD_RELOC_ARM_LDR_SB_G0
3195 ENUMX
3196   BFD_RELOC_ARM_LDR_SB_G1
3197 ENUMX
3198   BFD_RELOC_ARM_LDR_SB_G2
3199 ENUMX
3200   BFD_RELOC_ARM_LDRS_SB_G0
3201 ENUMX
3202   BFD_RELOC_ARM_LDRS_SB_G1
3203 ENUMX
3204   BFD_RELOC_ARM_LDRS_SB_G2
3205 ENUMX
3206   BFD_RELOC_ARM_LDC_SB_G0
3207 ENUMX
3208   BFD_RELOC_ARM_LDC_SB_G1
3209 ENUMX
3210   BFD_RELOC_ARM_LDC_SB_G2
3211 ENUMDOC
3212   ARM group relocations.
3213
3214 ENUM
3215   BFD_RELOC_ARM_V4BX
3216 ENUMDOC
3217   Annotation of BX instructions.
3218
3219 ENUM
3220   BFD_RELOC_ARM_IRELATIVE
3221 ENUMDOC
3222   ARM support for STT_GNU_IFUNC.
3223
3224 ENUM
3225   BFD_RELOC_ARM_IMMEDIATE
3226 ENUMX
3227   BFD_RELOC_ARM_ADRL_IMMEDIATE
3228 ENUMX
3229   BFD_RELOC_ARM_T32_IMMEDIATE
3230 ENUMX
3231   BFD_RELOC_ARM_T32_ADD_IMM
3232 ENUMX
3233   BFD_RELOC_ARM_T32_IMM12
3234 ENUMX
3235   BFD_RELOC_ARM_T32_ADD_PC12
3236 ENUMX
3237   BFD_RELOC_ARM_SHIFT_IMM
3238 ENUMX
3239   BFD_RELOC_ARM_SMC
3240 ENUMX
3241   BFD_RELOC_ARM_HVC
3242 ENUMX
3243   BFD_RELOC_ARM_SWI
3244 ENUMX
3245   BFD_RELOC_ARM_MULTI
3246 ENUMX
3247   BFD_RELOC_ARM_CP_OFF_IMM
3248 ENUMX
3249   BFD_RELOC_ARM_CP_OFF_IMM_S2
3250 ENUMX
3251   BFD_RELOC_ARM_T32_CP_OFF_IMM
3252 ENUMX
3253   BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
3254 ENUMX
3255   BFD_RELOC_ARM_ADR_IMM
3256 ENUMX
3257   BFD_RELOC_ARM_LDR_IMM
3258 ENUMX
3259   BFD_RELOC_ARM_LITERAL
3260 ENUMX
3261   BFD_RELOC_ARM_IN_POOL
3262 ENUMX
3263   BFD_RELOC_ARM_OFFSET_IMM8
3264 ENUMX
3265   BFD_RELOC_ARM_T32_OFFSET_U8
3266 ENUMX
3267   BFD_RELOC_ARM_T32_OFFSET_IMM
3268 ENUMX
3269   BFD_RELOC_ARM_HWLITERAL
3270 ENUMX
3271   BFD_RELOC_ARM_THUMB_ADD
3272 ENUMX
3273   BFD_RELOC_ARM_THUMB_IMM
3274 ENUMX
3275   BFD_RELOC_ARM_THUMB_SHIFT
3276 ENUMDOC
3277   These relocs are only used within the ARM assembler.  They are not
3278   (at present) written to any object files.
3279
3280 ENUM
3281   BFD_RELOC_SH_PCDISP8BY2
3282 ENUMX
3283   BFD_RELOC_SH_PCDISP12BY2
3284 ENUMX
3285   BFD_RELOC_SH_IMM3
3286 ENUMX
3287   BFD_RELOC_SH_IMM3U
3288 ENUMX
3289   BFD_RELOC_SH_DISP12
3290 ENUMX
3291   BFD_RELOC_SH_DISP12BY2
3292 ENUMX
3293   BFD_RELOC_SH_DISP12BY4
3294 ENUMX
3295   BFD_RELOC_SH_DISP12BY8
3296 ENUMX
3297   BFD_RELOC_SH_DISP20
3298 ENUMX
3299   BFD_RELOC_SH_DISP20BY8
3300 ENUMX
3301   BFD_RELOC_SH_IMM4
3302 ENUMX
3303   BFD_RELOC_SH_IMM4BY2
3304 ENUMX
3305   BFD_RELOC_SH_IMM4BY4
3306 ENUMX
3307   BFD_RELOC_SH_IMM8
3308 ENUMX
3309   BFD_RELOC_SH_IMM8BY2
3310 ENUMX
3311   BFD_RELOC_SH_IMM8BY4
3312 ENUMX
3313   BFD_RELOC_SH_PCRELIMM8BY2
3314 ENUMX
3315   BFD_RELOC_SH_PCRELIMM8BY4
3316 ENUMX
3317   BFD_RELOC_SH_SWITCH16
3318 ENUMX
3319   BFD_RELOC_SH_SWITCH32
3320 ENUMX
3321   BFD_RELOC_SH_USES
3322 ENUMX
3323   BFD_RELOC_SH_COUNT
3324 ENUMX
3325   BFD_RELOC_SH_ALIGN
3326 ENUMX
3327   BFD_RELOC_SH_CODE
3328 ENUMX
3329   BFD_RELOC_SH_DATA
3330 ENUMX
3331   BFD_RELOC_SH_LABEL
3332 ENUMX
3333   BFD_RELOC_SH_LOOP_START
3334 ENUMX
3335   BFD_RELOC_SH_LOOP_END
3336 ENUMX
3337   BFD_RELOC_SH_COPY
3338 ENUMX
3339   BFD_RELOC_SH_GLOB_DAT
3340 ENUMX
3341   BFD_RELOC_SH_JMP_SLOT
3342 ENUMX
3343   BFD_RELOC_SH_RELATIVE
3344 ENUMX
3345   BFD_RELOC_SH_GOTPC
3346 ENUMX
3347   BFD_RELOC_SH_GOT_LOW16
3348 ENUMX
3349   BFD_RELOC_SH_GOT_MEDLOW16
3350 ENUMX
3351   BFD_RELOC_SH_GOT_MEDHI16
3352 ENUMX
3353   BFD_RELOC_SH_GOT_HI16
3354 ENUMX
3355   BFD_RELOC_SH_GOTPLT_LOW16
3356 ENUMX
3357   BFD_RELOC_SH_GOTPLT_MEDLOW16
3358 ENUMX
3359   BFD_RELOC_SH_GOTPLT_MEDHI16
3360 ENUMX
3361   BFD_RELOC_SH_GOTPLT_HI16
3362 ENUMX
3363   BFD_RELOC_SH_PLT_LOW16
3364 ENUMX
3365   BFD_RELOC_SH_PLT_MEDLOW16
3366 ENUMX
3367   BFD_RELOC_SH_PLT_MEDHI16
3368 ENUMX
3369   BFD_RELOC_SH_PLT_HI16
3370 ENUMX
3371   BFD_RELOC_SH_GOTOFF_LOW16
3372 ENUMX
3373   BFD_RELOC_SH_GOTOFF_MEDLOW16
3374 ENUMX
3375   BFD_RELOC_SH_GOTOFF_MEDHI16
3376 ENUMX
3377   BFD_RELOC_SH_GOTOFF_HI16
3378 ENUMX
3379   BFD_RELOC_SH_GOTPC_LOW16
3380 ENUMX
3381   BFD_RELOC_SH_GOTPC_MEDLOW16
3382 ENUMX
3383   BFD_RELOC_SH_GOTPC_MEDHI16
3384 ENUMX
3385   BFD_RELOC_SH_GOTPC_HI16
3386 ENUMX
3387   BFD_RELOC_SH_COPY64
3388 ENUMX
3389   BFD_RELOC_SH_GLOB_DAT64
3390 ENUMX
3391   BFD_RELOC_SH_JMP_SLOT64
3392 ENUMX
3393   BFD_RELOC_SH_RELATIVE64
3394 ENUMX
3395   BFD_RELOC_SH_GOT10BY4
3396 ENUMX
3397   BFD_RELOC_SH_GOT10BY8
3398 ENUMX
3399   BFD_RELOC_SH_GOTPLT10BY4
3400 ENUMX
3401   BFD_RELOC_SH_GOTPLT10BY8
3402 ENUMX
3403   BFD_RELOC_SH_GOTPLT32
3404 ENUMX
3405   BFD_RELOC_SH_SHMEDIA_CODE
3406 ENUMX
3407   BFD_RELOC_SH_IMMU5
3408 ENUMX
3409   BFD_RELOC_SH_IMMS6
3410 ENUMX
3411   BFD_RELOC_SH_IMMS6BY32
3412 ENUMX
3413   BFD_RELOC_SH_IMMU6
3414 ENUMX
3415   BFD_RELOC_SH_IMMS10
3416 ENUMX
3417   BFD_RELOC_SH_IMMS10BY2
3418 ENUMX
3419   BFD_RELOC_SH_IMMS10BY4
3420 ENUMX
3421   BFD_RELOC_SH_IMMS10BY8
3422 ENUMX
3423   BFD_RELOC_SH_IMMS16
3424 ENUMX
3425   BFD_RELOC_SH_IMMU16
3426 ENUMX
3427   BFD_RELOC_SH_IMM_LOW16
3428 ENUMX
3429   BFD_RELOC_SH_IMM_LOW16_PCREL
3430 ENUMX
3431   BFD_RELOC_SH_IMM_MEDLOW16
3432 ENUMX
3433   BFD_RELOC_SH_IMM_MEDLOW16_PCREL
3434 ENUMX
3435   BFD_RELOC_SH_IMM_MEDHI16
3436 ENUMX
3437   BFD_RELOC_SH_IMM_MEDHI16_PCREL
3438 ENUMX
3439   BFD_RELOC_SH_IMM_HI16
3440 ENUMX
3441   BFD_RELOC_SH_IMM_HI16_PCREL
3442 ENUMX
3443   BFD_RELOC_SH_PT_16
3444 ENUMX
3445   BFD_RELOC_SH_TLS_GD_32
3446 ENUMX
3447   BFD_RELOC_SH_TLS_LD_32
3448 ENUMX
3449   BFD_RELOC_SH_TLS_LDO_32
3450 ENUMX
3451   BFD_RELOC_SH_TLS_IE_32
3452 ENUMX
3453   BFD_RELOC_SH_TLS_LE_32
3454 ENUMX
3455   BFD_RELOC_SH_TLS_DTPMOD32
3456 ENUMX
3457   BFD_RELOC_SH_TLS_DTPOFF32
3458 ENUMX
3459   BFD_RELOC_SH_TLS_TPOFF32
3460 ENUMX
3461   BFD_RELOC_SH_GOT20
3462 ENUMX
3463   BFD_RELOC_SH_GOTOFF20
3464 ENUMX
3465   BFD_RELOC_SH_GOTFUNCDESC
3466 ENUMX
3467   BFD_RELOC_SH_GOTFUNCDESC20
3468 ENUMX
3469   BFD_RELOC_SH_GOTOFFFUNCDESC
3470 ENUMX
3471   BFD_RELOC_SH_GOTOFFFUNCDESC20
3472 ENUMX
3473   BFD_RELOC_SH_FUNCDESC
3474 ENUMDOC
3475   Renesas / SuperH SH relocs.  Not all of these appear in object files.
3476
3477 ENUM
3478   BFD_RELOC_ARC_B22_PCREL
3479 ENUMDOC
3480   ARC Cores relocs.
3481   ARC 22 bit pc-relative branch.  The lowest two bits must be zero and are
3482   not stored in the instruction.  The high 20 bits are installed in bits 26
3483   through 7 of the instruction.
3484 ENUM
3485   BFD_RELOC_ARC_B26
3486 ENUMDOC
3487   ARC 26 bit absolute branch.  The lowest two bits must be zero and are not
3488   stored in the instruction.  The high 24 bits are installed in bits 23
3489   through 0.
3490
3491 ENUM
3492   BFD_RELOC_BFIN_16_IMM
3493 ENUMDOC
3494   ADI Blackfin 16 bit immediate absolute reloc.
3495 ENUM
3496   BFD_RELOC_BFIN_16_HIGH
3497 ENUMDOC
3498   ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3499 ENUM
3500   BFD_RELOC_BFIN_4_PCREL
3501 ENUMDOC
3502   ADI Blackfin 'a' part of LSETUP.
3503 ENUM
3504   BFD_RELOC_BFIN_5_PCREL
3505 ENUMDOC
3506   ADI Blackfin.
3507 ENUM
3508   BFD_RELOC_BFIN_16_LOW
3509 ENUMDOC
3510   ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3511 ENUM
3512   BFD_RELOC_BFIN_10_PCREL
3513 ENUMDOC
3514   ADI Blackfin.
3515 ENUM
3516   BFD_RELOC_BFIN_11_PCREL
3517 ENUMDOC
3518   ADI Blackfin 'b' part of LSETUP.
3519 ENUM
3520   BFD_RELOC_BFIN_12_PCREL_JUMP
3521 ENUMDOC
3522   ADI Blackfin.
3523 ENUM
3524   BFD_RELOC_BFIN_12_PCREL_JUMP_S
3525 ENUMDOC
3526   ADI Blackfin Short jump, pcrel.
3527 ENUM
3528   BFD_RELOC_BFIN_24_PCREL_CALL_X
3529 ENUMDOC
3530   ADI Blackfin Call.x not implemented.
3531 ENUM
3532   BFD_RELOC_BFIN_24_PCREL_JUMP_L
3533 ENUMDOC
3534   ADI Blackfin Long Jump pcrel.
3535 ENUM
3536   BFD_RELOC_BFIN_GOT17M4
3537 ENUMX
3538   BFD_RELOC_BFIN_GOTHI
3539 ENUMX
3540   BFD_RELOC_BFIN_GOTLO
3541 ENUMX
3542   BFD_RELOC_BFIN_FUNCDESC
3543 ENUMX
3544   BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3545 ENUMX
3546   BFD_RELOC_BFIN_FUNCDESC_GOTHI
3547 ENUMX
3548   BFD_RELOC_BFIN_FUNCDESC_GOTLO
3549 ENUMX
3550   BFD_RELOC_BFIN_FUNCDESC_VALUE
3551 ENUMX
3552   BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3553 ENUMX
3554   BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3555 ENUMX
3556   BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3557 ENUMX
3558   BFD_RELOC_BFIN_GOTOFF17M4
3559 ENUMX
3560   BFD_RELOC_BFIN_GOTOFFHI
3561 ENUMX
3562   BFD_RELOC_BFIN_GOTOFFLO
3563 ENUMDOC
3564   ADI Blackfin FD-PIC relocations.
3565 ENUM
3566   BFD_RELOC_BFIN_GOT
3567 ENUMDOC
3568   ADI Blackfin GOT relocation.
3569 ENUM
3570   BFD_RELOC_BFIN_PLTPC
3571 ENUMDOC
3572   ADI Blackfin PLTPC relocation.
3573 ENUM
3574   BFD_ARELOC_BFIN_PUSH
3575 ENUMDOC
3576   ADI Blackfin arithmetic relocation.
3577 ENUM
3578   BFD_ARELOC_BFIN_CONST
3579 ENUMDOC
3580   ADI Blackfin arithmetic relocation.
3581 ENUM
3582   BFD_ARELOC_BFIN_ADD
3583 ENUMDOC
3584   ADI Blackfin arithmetic relocation.
3585 ENUM
3586   BFD_ARELOC_BFIN_SUB
3587 ENUMDOC
3588   ADI Blackfin arithmetic relocation.
3589 ENUM
3590   BFD_ARELOC_BFIN_MULT
3591 ENUMDOC
3592   ADI Blackfin arithmetic relocation.
3593 ENUM
3594   BFD_ARELOC_BFIN_DIV
3595 ENUMDOC
3596   ADI Blackfin arithmetic relocation.
3597 ENUM
3598   BFD_ARELOC_BFIN_MOD
3599 ENUMDOC
3600   ADI Blackfin arithmetic relocation.
3601 ENUM
3602   BFD_ARELOC_BFIN_LSHIFT
3603 ENUMDOC
3604   ADI Blackfin arithmetic relocation.
3605 ENUM
3606   BFD_ARELOC_BFIN_RSHIFT
3607 ENUMDOC
3608   ADI Blackfin arithmetic relocation.
3609 ENUM
3610   BFD_ARELOC_BFIN_AND
3611 ENUMDOC
3612   ADI Blackfin arithmetic relocation.
3613 ENUM
3614   BFD_ARELOC_BFIN_OR
3615 ENUMDOC
3616   ADI Blackfin arithmetic relocation.
3617 ENUM
3618   BFD_ARELOC_BFIN_XOR
3619 ENUMDOC
3620   ADI Blackfin arithmetic relocation.
3621 ENUM
3622   BFD_ARELOC_BFIN_LAND
3623 ENUMDOC
3624   ADI Blackfin arithmetic relocation.
3625 ENUM
3626   BFD_ARELOC_BFIN_LOR
3627 ENUMDOC
3628   ADI Blackfin arithmetic relocation.
3629 ENUM
3630   BFD_ARELOC_BFIN_LEN
3631 ENUMDOC
3632   ADI Blackfin arithmetic relocation.
3633 ENUM
3634   BFD_ARELOC_BFIN_NEG
3635 ENUMDOC
3636   ADI Blackfin arithmetic relocation.
3637 ENUM
3638   BFD_ARELOC_BFIN_COMP
3639 ENUMDOC
3640   ADI Blackfin arithmetic relocation.
3641 ENUM
3642   BFD_ARELOC_BFIN_PAGE
3643 ENUMDOC
3644   ADI Blackfin arithmetic relocation.
3645 ENUM
3646   BFD_ARELOC_BFIN_HWPAGE
3647 ENUMDOC
3648   ADI Blackfin arithmetic relocation.
3649 ENUM
3650   BFD_ARELOC_BFIN_ADDR
3651 ENUMDOC
3652   ADI Blackfin arithmetic relocation.
3653
3654 ENUM
3655   BFD_RELOC_D10V_10_PCREL_R
3656 ENUMDOC
3657   Mitsubishi D10V relocs.
3658   This is a 10-bit reloc with the right 2 bits
3659   assumed to be 0.
3660 ENUM
3661   BFD_RELOC_D10V_10_PCREL_L
3662 ENUMDOC
3663   Mitsubishi D10V relocs.
3664   This is a 10-bit reloc with the right 2 bits
3665   assumed to be 0.  This is the same as the previous reloc
3666   except it is in the left container, i.e.,
3667   shifted left 15 bits.
3668 ENUM
3669   BFD_RELOC_D10V_18
3670 ENUMDOC
3671   This is an 18-bit reloc with the right 2 bits
3672   assumed to be 0.
3673 ENUM
3674   BFD_RELOC_D10V_18_PCREL
3675 ENUMDOC
3676   This is an 18-bit reloc with the right 2 bits
3677   assumed to be 0.
3678
3679 ENUM
3680   BFD_RELOC_D30V_6
3681 ENUMDOC
3682   Mitsubishi D30V relocs.
3683   This is a 6-bit absolute reloc.
3684 ENUM
3685   BFD_RELOC_D30V_9_PCREL
3686 ENUMDOC
3687   This is a 6-bit pc-relative reloc with
3688   the right 3 bits assumed to be 0.
3689 ENUM
3690   BFD_RELOC_D30V_9_PCREL_R
3691 ENUMDOC
3692   This is a 6-bit pc-relative reloc with
3693   the right 3 bits assumed to be 0. Same
3694   as the previous reloc but on the right side
3695   of the container.
3696 ENUM
3697   BFD_RELOC_D30V_15
3698 ENUMDOC
3699   This is a 12-bit absolute reloc with the
3700   right 3 bitsassumed to be 0.
3701 ENUM
3702   BFD_RELOC_D30V_15_PCREL
3703 ENUMDOC
3704   This is a 12-bit pc-relative reloc with
3705   the right 3 bits assumed to be 0.
3706 ENUM
3707   BFD_RELOC_D30V_15_PCREL_R
3708 ENUMDOC
3709   This is a 12-bit pc-relative reloc with
3710   the right 3 bits assumed to be 0. Same
3711   as the previous reloc but on the right side
3712   of the container.
3713 ENUM
3714   BFD_RELOC_D30V_21
3715 ENUMDOC
3716   This is an 18-bit absolute reloc with
3717   the right 3 bits assumed to be 0.
3718 ENUM
3719   BFD_RELOC_D30V_21_PCREL
3720 ENUMDOC
3721   This is an 18-bit pc-relative reloc with
3722   the right 3 bits assumed to be 0.
3723 ENUM
3724   BFD_RELOC_D30V_21_PCREL_R
3725 ENUMDOC
3726   This is an 18-bit pc-relative reloc with
3727   the right 3 bits assumed to be 0. Same
3728   as the previous reloc but on the right side
3729   of the container.
3730 ENUM
3731   BFD_RELOC_D30V_32
3732 ENUMDOC
3733   This is a 32-bit absolute reloc.
3734 ENUM
3735   BFD_RELOC_D30V_32_PCREL
3736 ENUMDOC
3737   This is a 32-bit pc-relative reloc.
3738
3739 ENUM
3740   BFD_RELOC_DLX_HI16_S
3741 ENUMDOC
3742   DLX relocs
3743 ENUM
3744   BFD_RELOC_DLX_LO16
3745 ENUMDOC
3746   DLX relocs
3747 ENUM
3748   BFD_RELOC_DLX_JMP26
3749 ENUMDOC
3750   DLX relocs
3751
3752 ENUM
3753   BFD_RELOC_M32C_HI8
3754 ENUMX
3755   BFD_RELOC_M32C_RL_JUMP
3756 ENUMX
3757   BFD_RELOC_M32C_RL_1ADDR
3758 ENUMX
3759   BFD_RELOC_M32C_RL_2ADDR
3760 ENUMDOC
3761   Renesas M16C/M32C Relocations.
3762
3763 ENUM
3764   BFD_RELOC_M32R_24
3765 ENUMDOC
3766   Renesas M32R (formerly Mitsubishi M32R) relocs.
3767   This is a 24 bit absolute address.
3768 ENUM
3769   BFD_RELOC_M32R_10_PCREL
3770 ENUMDOC
3771   This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3772 ENUM
3773   BFD_RELOC_M32R_18_PCREL
3774 ENUMDOC
3775   This is an 18-bit reloc with the right 2 bits assumed to be 0.
3776 ENUM
3777   BFD_RELOC_M32R_26_PCREL
3778 ENUMDOC
3779   This is a 26-bit reloc with the right 2 bits assumed to be 0.
3780 ENUM
3781   BFD_RELOC_M32R_HI16_ULO
3782 ENUMDOC
3783   This is a 16-bit reloc containing the high 16 bits of an address
3784   used when the lower 16 bits are treated as unsigned.
3785 ENUM
3786   BFD_RELOC_M32R_HI16_SLO
3787 ENUMDOC
3788   This is a 16-bit reloc containing the high 16 bits of an address
3789   used when the lower 16 bits are treated as signed.
3790 ENUM
3791   BFD_RELOC_M32R_LO16
3792 ENUMDOC
3793   This is a 16-bit reloc containing the lower 16 bits of an address.
3794 ENUM
3795   BFD_RELOC_M32R_SDA16
3796 ENUMDOC
3797   This is a 16-bit reloc containing the small data area offset for use in
3798   add3, load, and store instructions.
3799 ENUM
3800   BFD_RELOC_M32R_GOT24
3801 ENUMX
3802   BFD_RELOC_M32R_26_PLTREL
3803 ENUMX
3804   BFD_RELOC_M32R_COPY
3805 ENUMX
3806   BFD_RELOC_M32R_GLOB_DAT
3807 ENUMX
3808   BFD_RELOC_M32R_JMP_SLOT
3809 ENUMX
3810   BFD_RELOC_M32R_RELATIVE
3811 ENUMX
3812   BFD_RELOC_M32R_GOTOFF
3813 ENUMX
3814   BFD_RELOC_M32R_GOTOFF_HI_ULO
3815 ENUMX
3816   BFD_RELOC_M32R_GOTOFF_HI_SLO
3817 ENUMX
3818   BFD_RELOC_M32R_GOTOFF_LO
3819 ENUMX
3820   BFD_RELOC_M32R_GOTPC24
3821 ENUMX
3822   BFD_RELOC_M32R_GOT16_HI_ULO
3823 ENUMX
3824   BFD_RELOC_M32R_GOT16_HI_SLO
3825 ENUMX
3826   BFD_RELOC_M32R_GOT16_LO
3827 ENUMX
3828   BFD_RELOC_M32R_GOTPC_HI_ULO
3829 ENUMX
3830   BFD_RELOC_M32R_GOTPC_HI_SLO
3831 ENUMX
3832   BFD_RELOC_M32R_GOTPC_LO
3833 ENUMDOC
3834   For PIC.
3835
3836
3837 ENUM
3838   BFD_RELOC_V850_9_PCREL
3839 ENUMDOC
3840   This is a 9-bit reloc
3841 ENUM
3842   BFD_RELOC_V850_22_PCREL
3843 ENUMDOC
3844   This is a 22-bit reloc
3845
3846 ENUM
3847   BFD_RELOC_V850_SDA_16_16_OFFSET
3848 ENUMDOC
3849   This is a 16 bit offset from the short data area pointer.
3850 ENUM
3851   BFD_RELOC_V850_SDA_15_16_OFFSET
3852 ENUMDOC
3853   This is a 16 bit offset (of which only 15 bits are used) from the
3854   short data area pointer.
3855 ENUM
3856   BFD_RELOC_V850_ZDA_16_16_OFFSET
3857 ENUMDOC
3858   This is a 16 bit offset from the zero data area pointer.
3859 ENUM
3860   BFD_RELOC_V850_ZDA_15_16_OFFSET
3861 ENUMDOC
3862   This is a 16 bit offset (of which only 15 bits are used) from the
3863   zero data area pointer.
3864 ENUM
3865   BFD_RELOC_V850_TDA_6_8_OFFSET
3866 ENUMDOC
3867   This is an 8 bit offset (of which only 6 bits are used) from the
3868   tiny data area pointer.
3869 ENUM
3870   BFD_RELOC_V850_TDA_7_8_OFFSET
3871 ENUMDOC
3872   This is an 8bit offset (of which only 7 bits are used) from the tiny
3873   data area pointer.
3874 ENUM
3875   BFD_RELOC_V850_TDA_7_7_OFFSET
3876 ENUMDOC
3877   This is a 7 bit offset from the tiny data area pointer.
3878 ENUM
3879   BFD_RELOC_V850_TDA_16_16_OFFSET
3880 ENUMDOC
3881   This is a 16 bit offset from the tiny data area pointer.
3882 COMMENT
3883 ENUM
3884   BFD_RELOC_V850_TDA_4_5_OFFSET
3885 ENUMDOC
3886   This is a 5 bit offset (of which only 4 bits are used) from the tiny
3887   data area pointer.
3888 ENUM
3889   BFD_RELOC_V850_TDA_4_4_OFFSET
3890 ENUMDOC
3891   This is a 4 bit offset from the tiny data area pointer.
3892 ENUM
3893   BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
3894 ENUMDOC
3895   This is a 16 bit offset from the short data area pointer, with the
3896   bits placed non-contiguously in the instruction.
3897 ENUM
3898   BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
3899 ENUMDOC
3900   This is a 16 bit offset from the zero data area pointer, with the
3901   bits placed non-contiguously in the instruction.
3902 ENUM
3903   BFD_RELOC_V850_CALLT_6_7_OFFSET
3904 ENUMDOC
3905   This is a 6 bit offset from the call table base pointer.
3906 ENUM
3907   BFD_RELOC_V850_CALLT_16_16_OFFSET
3908 ENUMDOC
3909   This is a 16 bit offset from the call table base pointer.
3910 ENUM
3911   BFD_RELOC_V850_LONGCALL
3912 ENUMDOC
3913   Used for relaxing indirect function calls.
3914 ENUM
3915   BFD_RELOC_V850_LONGJUMP
3916 ENUMDOC
3917   Used for relaxing indirect jumps.
3918 ENUM
3919   BFD_RELOC_V850_ALIGN
3920 ENUMDOC
3921   Used to maintain alignment whilst relaxing.
3922 ENUM
3923   BFD_RELOC_V850_LO16_SPLIT_OFFSET
3924 ENUMDOC
3925   This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
3926   instructions.
3927 ENUM
3928   BFD_RELOC_V850_16_PCREL
3929 ENUMDOC
3930   This is a 16-bit reloc.
3931 ENUM
3932   BFD_RELOC_V850_17_PCREL
3933 ENUMDOC
3934   This is a 17-bit reloc.
3935 ENUM
3936   BFD_RELOC_V850_23
3937 ENUMDOC
3938   This is a 23-bit reloc.
3939 ENUM
3940   BFD_RELOC_V850_32_PCREL
3941 ENUMDOC
3942   This is a 32-bit reloc.
3943 ENUM
3944   BFD_RELOC_V850_32_ABS
3945 ENUMDOC
3946   This is a 32-bit reloc.
3947 ENUM
3948   BFD_RELOC_V850_16_SPLIT_OFFSET
3949 ENUMDOC
3950   This is a 16-bit reloc.
3951 ENUM
3952   BFD_RELOC_V850_16_S1
3953 ENUMDOC
3954   This is a 16-bit reloc.
3955 ENUM
3956   BFD_RELOC_V850_LO16_S1
3957 ENUMDOC
3958   Low 16 bits. 16 bit shifted by 1.
3959 ENUM
3960   BFD_RELOC_V850_CALLT_15_16_OFFSET
3961 ENUMDOC
3962   This is a 16 bit offset from the call table base pointer.
3963 ENUM
3964   BFD_RELOC_V850_32_GOTPCREL
3965 ENUMDOC
3966   DSO relocations.
3967 ENUM
3968   BFD_RELOC_V850_16_GOT
3969 ENUMDOC
3970   DSO relocations.
3971 ENUM
3972   BFD_RELOC_V850_32_GOT
3973 ENUMDOC
3974   DSO relocations.
3975 ENUM
3976   BFD_RELOC_V850_22_PLT_PCREL
3977 ENUMDOC
3978   DSO relocations.
3979 ENUM
3980   BFD_RELOC_V850_32_PLT_PCREL
3981 ENUMDOC
3982   DSO relocations.
3983 ENUM
3984   BFD_RELOC_V850_COPY
3985 ENUMDOC
3986   DSO relocations.
3987 ENUM
3988   BFD_RELOC_V850_GLOB_DAT
3989 ENUMDOC
3990   DSO relocations.
3991 ENUM
3992   BFD_RELOC_V850_JMP_SLOT
3993 ENUMDOC
3994   DSO relocations.
3995 ENUM
3996   BFD_RELOC_V850_RELATIVE
3997 ENUMDOC
3998   DSO relocations.
3999 ENUM
4000   BFD_RELOC_V850_16_GOTOFF
4001 ENUMDOC
4002   DSO relocations.
4003 ENUM
4004   BFD_RELOC_V850_32_GOTOFF
4005 ENUMDOC
4006   DSO relocations.
4007 ENUM
4008   BFD_RELOC_V850_CODE
4009 ENUMDOC
4010   start code.
4011 ENUM
4012   BFD_RELOC_V850_DATA
4013 ENUMDOC
4014   start data in text.
4015
4016 ENUM
4017   BFD_RELOC_TIC30_LDP
4018 ENUMDOC
4019   This is a 8bit DP reloc for the tms320c30, where the most
4020   significant 8 bits of a 24 bit word are placed into the least
4021   significant 8 bits of the opcode.
4022
4023 ENUM
4024   BFD_RELOC_TIC54X_PARTLS7
4025 ENUMDOC
4026   This is a 7bit reloc for the tms320c54x, where the least
4027   significant 7 bits of a 16 bit word are placed into the least
4028   significant 7 bits of the opcode.
4029
4030 ENUM
4031   BFD_RELOC_TIC54X_PARTMS9
4032 ENUMDOC
4033   This is a 9bit DP reloc for the tms320c54x, where the most
4034   significant 9 bits of a 16 bit word are placed into the least
4035   significant 9 bits of the opcode.
4036
4037 ENUM
4038   BFD_RELOC_TIC54X_23
4039 ENUMDOC
4040   This is an extended address 23-bit reloc for the tms320c54x.
4041
4042 ENUM
4043   BFD_RELOC_TIC54X_16_OF_23
4044 ENUMDOC
4045   This is a 16-bit reloc for the tms320c54x, where the least
4046   significant 16 bits of a 23-bit extended address are placed into
4047   the opcode.
4048
4049 ENUM
4050   BFD_RELOC_TIC54X_MS7_OF_23
4051 ENUMDOC
4052   This is a reloc for the tms320c54x, where the most
4053   significant 7 bits of a 23-bit extended address are placed into
4054   the opcode.
4055
4056 ENUM
4057   BFD_RELOC_C6000_PCR_S21
4058 ENUMX
4059   BFD_RELOC_C6000_PCR_S12
4060 ENUMX
4061   BFD_RELOC_C6000_PCR_S10
4062 ENUMX
4063   BFD_RELOC_C6000_PCR_S7
4064 ENUMX
4065   BFD_RELOC_C6000_ABS_S16
4066 ENUMX
4067   BFD_RELOC_C6000_ABS_L16
4068 ENUMX
4069   BFD_RELOC_C6000_ABS_H16
4070 ENUMX
4071   BFD_RELOC_C6000_SBR_U15_B
4072 ENUMX
4073   BFD_RELOC_C6000_SBR_U15_H
4074 ENUMX
4075   BFD_RELOC_C6000_SBR_U15_W
4076 ENUMX
4077   BFD_RELOC_C6000_SBR_S16
4078 ENUMX
4079   BFD_RELOC_C6000_SBR_L16_B
4080 ENUMX
4081   BFD_RELOC_C6000_SBR_L16_H
4082 ENUMX
4083   BFD_RELOC_C6000_SBR_L16_W
4084 ENUMX
4085   BFD_RELOC_C6000_SBR_H16_B
4086 ENUMX
4087   BFD_RELOC_C6000_SBR_H16_H
4088 ENUMX
4089   BFD_RELOC_C6000_SBR_H16_W
4090 ENUMX
4091   BFD_RELOC_C6000_SBR_GOT_U15_W
4092 ENUMX
4093   BFD_RELOC_C6000_SBR_GOT_L16_W
4094 ENUMX
4095   BFD_RELOC_C6000_SBR_GOT_H16_W
4096 ENUMX
4097   BFD_RELOC_C6000_DSBT_INDEX
4098 ENUMX
4099   BFD_RELOC_C6000_PREL31
4100 ENUMX
4101   BFD_RELOC_C6000_COPY
4102 ENUMX
4103   BFD_RELOC_C6000_JUMP_SLOT
4104 ENUMX
4105   BFD_RELOC_C6000_EHTYPE
4106 ENUMX
4107   BFD_RELOC_C6000_PCR_H16
4108 ENUMX
4109   BFD_RELOC_C6000_PCR_L16
4110 ENUMX
4111   BFD_RELOC_C6000_ALIGN
4112 ENUMX
4113   BFD_RELOC_C6000_FPHEAD
4114 ENUMX
4115   BFD_RELOC_C6000_NOCMP
4116 ENUMDOC
4117   TMS320C6000 relocations.
4118
4119 ENUM
4120   BFD_RELOC_FR30_48
4121 ENUMDOC
4122   This is a 48 bit reloc for the FR30 that stores 32 bits.
4123 ENUM
4124   BFD_RELOC_FR30_20
4125 ENUMDOC
4126   This is a 32 bit reloc for the FR30 that stores 20 bits split up into
4127   two sections.
4128 ENUM
4129   BFD_RELOC_FR30_6_IN_4
4130 ENUMDOC
4131   This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
4132   4 bits.
4133 ENUM
4134   BFD_RELOC_FR30_8_IN_8
4135 ENUMDOC
4136   This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
4137   into 8 bits.
4138 ENUM
4139   BFD_RELOC_FR30_9_IN_8
4140 ENUMDOC
4141   This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
4142   into 8 bits.
4143 ENUM
4144   BFD_RELOC_FR30_10_IN_8
4145 ENUMDOC
4146   This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
4147   into 8 bits.
4148 ENUM
4149   BFD_RELOC_FR30_9_PCREL
4150 ENUMDOC
4151   This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
4152   short offset into 8 bits.
4153 ENUM
4154   BFD_RELOC_FR30_12_PCREL
4155 ENUMDOC
4156   This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
4157   short offset into 11 bits.
4158
4159 ENUM
4160   BFD_RELOC_MCORE_PCREL_IMM8BY4
4161 ENUMX
4162   BFD_RELOC_MCORE_PCREL_IMM11BY2
4163 ENUMX
4164   BFD_RELOC_MCORE_PCREL_IMM4BY2
4165 ENUMX
4166   BFD_RELOC_MCORE_PCREL_32
4167 ENUMX
4168   BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
4169 ENUMX
4170   BFD_RELOC_MCORE_RVA
4171 ENUMDOC
4172   Motorola Mcore relocations.
4173
4174 ENUM
4175   BFD_RELOC_MEP_8
4176 ENUMX
4177   BFD_RELOC_MEP_16
4178 ENUMX
4179   BFD_RELOC_MEP_32
4180 ENUMX
4181   BFD_RELOC_MEP_PCREL8A2
4182 ENUMX
4183   BFD_RELOC_MEP_PCREL12A2
4184 ENUMX
4185   BFD_RELOC_MEP_PCREL17A2
4186 ENUMX
4187   BFD_RELOC_MEP_PCREL24A2
4188 ENUMX
4189   BFD_RELOC_MEP_PCABS24A2
4190 ENUMX
4191   BFD_RELOC_MEP_LOW16
4192 ENUMX
4193   BFD_RELOC_MEP_HI16U
4194 ENUMX
4195   BFD_RELOC_MEP_HI16S
4196 ENUMX
4197   BFD_RELOC_MEP_GPREL
4198 ENUMX
4199   BFD_RELOC_MEP_TPREL
4200 ENUMX
4201   BFD_RELOC_MEP_TPREL7
4202 ENUMX
4203   BFD_RELOC_MEP_TPREL7A2
4204 ENUMX
4205   BFD_RELOC_MEP_TPREL7A4
4206 ENUMX
4207   BFD_RELOC_MEP_UIMM24
4208 ENUMX
4209   BFD_RELOC_MEP_ADDR24A4
4210 ENUMX
4211   BFD_RELOC_MEP_GNU_VTINHERIT
4212 ENUMX
4213   BFD_RELOC_MEP_GNU_VTENTRY
4214 ENUMDOC
4215   Toshiba Media Processor Relocations.
4216 COMMENT
4217
4218 ENUM
4219   BFD_RELOC_METAG_HIADDR16
4220 ENUMX
4221   BFD_RELOC_METAG_LOADDR16
4222 ENUMX
4223   BFD_RELOC_METAG_RELBRANCH
4224 ENUMX
4225   BFD_RELOC_METAG_GETSETOFF
4226 ENUMX
4227   BFD_RELOC_METAG_HIOG
4228 ENUMX
4229   BFD_RELOC_METAG_LOOG
4230 ENUMX
4231   BFD_RELOC_METAG_REL8
4232 ENUMX
4233   BFD_RELOC_METAG_REL16
4234 ENUMX
4235   BFD_RELOC_METAG_HI16_GOTOFF
4236 ENUMX
4237   BFD_RELOC_METAG_LO16_GOTOFF
4238 ENUMX
4239   BFD_RELOC_METAG_GETSET_GOTOFF
4240 ENUMX
4241   BFD_RELOC_METAG_GETSET_GOT
4242 ENUMX
4243   BFD_RELOC_METAG_HI16_GOTPC
4244 ENUMX
4245   BFD_RELOC_METAG_LO16_GOTPC
4246 ENUMX
4247   BFD_RELOC_METAG_HI16_PLT
4248 ENUMX
4249   BFD_RELOC_METAG_LO16_PLT
4250 ENUMX
4251   BFD_RELOC_METAG_RELBRANCH_PLT
4252 ENUMX
4253   BFD_RELOC_METAG_GOTOFF
4254 ENUMX
4255   BFD_RELOC_METAG_PLT
4256 ENUMX
4257   BFD_RELOC_METAG_COPY
4258 ENUMX
4259   BFD_RELOC_METAG_JMP_SLOT
4260 ENUMX
4261   BFD_RELOC_METAG_RELATIVE
4262 ENUMX
4263   BFD_RELOC_METAG_GLOB_DAT
4264 ENUMX
4265   BFD_RELOC_METAG_TLS_GD
4266 ENUMX
4267   BFD_RELOC_METAG_TLS_LDM
4268 ENUMX
4269   BFD_RELOC_METAG_TLS_LDO_HI16
4270 ENUMX
4271   BFD_RELOC_METAG_TLS_LDO_LO16
4272 ENUMX
4273   BFD_RELOC_METAG_TLS_LDO
4274 ENUMX
4275   BFD_RELOC_METAG_TLS_IE
4276 ENUMX
4277   BFD_RELOC_METAG_TLS_IENONPIC
4278 ENUMX
4279   BFD_RELOC_METAG_TLS_IENONPIC_HI16
4280 ENUMX
4281   BFD_RELOC_METAG_TLS_IENONPIC_LO16
4282 ENUMX
4283   BFD_RELOC_METAG_TLS_TPOFF
4284 ENUMX
4285   BFD_RELOC_METAG_TLS_DTPMOD
4286 ENUMX
4287   BFD_RELOC_METAG_TLS_DTPOFF
4288 ENUMX
4289   BFD_RELOC_METAG_TLS_LE
4290 ENUMX
4291   BFD_RELOC_METAG_TLS_LE_HI16
4292 ENUMX
4293   BFD_RELOC_METAG_TLS_LE_LO16
4294 ENUMDOC
4295   Imagination Technologies Meta relocations.
4296
4297 ENUM
4298   BFD_RELOC_MMIX_GETA
4299 ENUMX
4300   BFD_RELOC_MMIX_GETA_1
4301 ENUMX
4302   BFD_RELOC_MMIX_GETA_2
4303 ENUMX
4304   BFD_RELOC_MMIX_GETA_3
4305 ENUMDOC
4306   These are relocations for the GETA instruction.
4307 ENUM
4308   BFD_RELOC_MMIX_CBRANCH
4309 ENUMX
4310   BFD_RELOC_MMIX_CBRANCH_J
4311 ENUMX
4312   BFD_RELOC_MMIX_CBRANCH_1
4313 ENUMX
4314   BFD_RELOC_MMIX_CBRANCH_2
4315 ENUMX
4316   BFD_RELOC_MMIX_CBRANCH_3
4317 ENUMDOC
4318   These are relocations for a conditional branch instruction.
4319 ENUM
4320   BFD_RELOC_MMIX_PUSHJ
4321 ENUMX
4322   BFD_RELOC_MMIX_PUSHJ_1
4323 ENUMX
4324   BFD_RELOC_MMIX_PUSHJ_2
4325 ENUMX
4326   BFD_RELOC_MMIX_PUSHJ_3
4327 ENUMX
4328   BFD_RELOC_MMIX_PUSHJ_STUBBABLE
4329 ENUMDOC
4330   These are relocations for the PUSHJ instruction.
4331 ENUM
4332   BFD_RELOC_MMIX_JMP
4333 ENUMX
4334   BFD_RELOC_MMIX_JMP_1
4335 ENUMX
4336   BFD_RELOC_MMIX_JMP_2
4337 ENUMX
4338   BFD_RELOC_MMIX_JMP_3
4339 ENUMDOC
4340   These are relocations for the JMP instruction.
4341 ENUM
4342   BFD_RELOC_MMIX_ADDR19
4343 ENUMDOC
4344   This is a relocation for a relative address as in a GETA instruction or
4345   a branch.
4346 ENUM
4347   BFD_RELOC_MMIX_ADDR27
4348 ENUMDOC
4349   This is a relocation for a relative address as in a JMP instruction.
4350 ENUM
4351   BFD_RELOC_MMIX_REG_OR_BYTE
4352 ENUMDOC
4353   This is a relocation for an instruction field that may be a general
4354   register or a value 0..255.
4355 ENUM
4356   BFD_RELOC_MMIX_REG
4357 ENUMDOC
4358   This is a relocation for an instruction field that may be a general
4359   register.
4360 ENUM
4361   BFD_RELOC_MMIX_BASE_PLUS_OFFSET
4362 ENUMDOC
4363   This is a relocation for two instruction fields holding a register and
4364   an offset, the equivalent of the relocation.
4365 ENUM
4366   BFD_RELOC_MMIX_LOCAL
4367 ENUMDOC
4368   This relocation is an assertion that the expression is not allocated as
4369   a global register.  It does not modify contents.
4370
4371 ENUM
4372   BFD_RELOC_AVR_7_PCREL
4373 ENUMDOC
4374   This is a 16 bit reloc for the AVR that stores 8 bit pc relative
4375   short offset into 7 bits.
4376 ENUM
4377   BFD_RELOC_AVR_13_PCREL
4378 ENUMDOC
4379   This is a 16 bit reloc for the AVR that stores 13 bit pc relative
4380   short offset into 12 bits.
4381 ENUM
4382   BFD_RELOC_AVR_16_PM
4383 ENUMDOC
4384   This is a 16 bit reloc for the AVR that stores 17 bit value (usually
4385   program memory address) into 16 bits.
4386 ENUM
4387   BFD_RELOC_AVR_LO8_LDI
4388 ENUMDOC
4389   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4390   data memory address) into 8 bit immediate value of LDI insn.
4391 ENUM
4392   BFD_RELOC_AVR_HI8_LDI
4393 ENUMDOC
4394   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4395   of data memory address) into 8 bit immediate value of LDI insn.
4396 ENUM
4397   BFD_RELOC_AVR_HH8_LDI
4398 ENUMDOC
4399   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4400   of program memory address) into 8 bit immediate value of LDI insn.
4401 ENUM
4402   BFD_RELOC_AVR_MS8_LDI
4403 ENUMDOC
4404   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4405   of 32 bit value) into 8 bit immediate value of LDI insn.
4406 ENUM
4407   BFD_RELOC_AVR_LO8_LDI_NEG
4408 ENUMDOC
4409   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4410   (usually data memory address) into 8 bit immediate value of SUBI insn.
4411 ENUM
4412   BFD_RELOC_AVR_HI8_LDI_NEG
4413 ENUMDOC
4414   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4415   (high 8 bit of data memory address) into 8 bit immediate value of
4416   SUBI insn.
4417 ENUM
4418   BFD_RELOC_AVR_HH8_LDI_NEG
4419 ENUMDOC
4420   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4421   (most high 8 bit of program memory address) into 8 bit immediate value
4422   of LDI or SUBI insn.
4423 ENUM
4424   BFD_RELOC_AVR_MS8_LDI_NEG
4425 ENUMDOC
4426   This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
4427   of 32 bit value) into 8 bit immediate value of LDI insn.
4428 ENUM
4429   BFD_RELOC_AVR_LO8_LDI_PM
4430 ENUMDOC
4431   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4432   command address) into 8 bit immediate value of LDI insn.
4433 ENUM
4434   BFD_RELOC_AVR_LO8_LDI_GS
4435 ENUMDOC
4436   This is a 16 bit reloc for the AVR that stores 8 bit value
4437   (command address) into 8 bit immediate value of LDI insn. If the address
4438   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4439   in the lower 128k.
4440 ENUM
4441   BFD_RELOC_AVR_HI8_LDI_PM
4442 ENUMDOC
4443   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4444   of command address) into 8 bit immediate value of LDI insn.
4445 ENUM
4446   BFD_RELOC_AVR_HI8_LDI_GS
4447 ENUMDOC
4448   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4449   of command address) into 8 bit immediate value of LDI insn.  If the address
4450   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4451   below 128k.
4452 ENUM
4453   BFD_RELOC_AVR_HH8_LDI_PM
4454 ENUMDOC
4455   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4456   of command address) into 8 bit immediate value of LDI insn.
4457 ENUM
4458   BFD_RELOC_AVR_LO8_LDI_PM_NEG
4459 ENUMDOC
4460   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4461   (usually command address) into 8 bit immediate value of SUBI insn.
4462 ENUM
4463   BFD_RELOC_AVR_HI8_LDI_PM_NEG
4464 ENUMDOC
4465   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4466   (high 8 bit of 16 bit command address) into 8 bit immediate value
4467   of SUBI insn.
4468 ENUM
4469   BFD_RELOC_AVR_HH8_LDI_PM_NEG
4470 ENUMDOC
4471   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4472   (high 6 bit of 22 bit command address) into 8 bit immediate
4473   value of SUBI insn.
4474 ENUM
4475   BFD_RELOC_AVR_CALL
4476 ENUMDOC
4477   This is a 32 bit reloc for the AVR that stores 23 bit value
4478   into 22 bits.
4479 ENUM
4480   BFD_RELOC_AVR_LDI
4481 ENUMDOC
4482   This is a 16 bit reloc for the AVR that stores all needed bits
4483   for absolute addressing with ldi with overflow check to linktime
4484 ENUM
4485   BFD_RELOC_AVR_6
4486 ENUMDOC
4487   This is a 6 bit reloc for the AVR that stores offset for ldd/std
4488   instructions
4489 ENUM
4490   BFD_RELOC_AVR_6_ADIW
4491 ENUMDOC
4492   This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
4493   instructions
4494 ENUM
4495   BFD_RELOC_AVR_8_LO
4496 ENUMDOC
4497   This is a 8 bit reloc for the AVR that stores bits 0..7 of a symbol
4498   in .byte lo8(symbol)
4499 ENUM
4500   BFD_RELOC_AVR_8_HI
4501 ENUMDOC
4502   This is a 8 bit reloc for the AVR that stores bits 8..15 of a symbol
4503   in .byte hi8(symbol)
4504 ENUM
4505   BFD_RELOC_AVR_8_HLO
4506 ENUMDOC
4507   This is a 8 bit reloc for the AVR that stores bits 16..23 of a symbol
4508   in .byte hlo8(symbol)
4509
4510 ENUM
4511   BFD_RELOC_RL78_NEG8
4512 ENUMX
4513   BFD_RELOC_RL78_NEG16
4514 ENUMX
4515   BFD_RELOC_RL78_NEG24
4516 ENUMX
4517   BFD_RELOC_RL78_NEG32
4518 ENUMX
4519   BFD_RELOC_RL78_16_OP
4520 ENUMX
4521   BFD_RELOC_RL78_24_OP
4522 ENUMX
4523   BFD_RELOC_RL78_32_OP
4524 ENUMX
4525   BFD_RELOC_RL78_8U
4526 ENUMX
4527   BFD_RELOC_RL78_16U
4528 ENUMX
4529   BFD_RELOC_RL78_24U
4530 ENUMX
4531   BFD_RELOC_RL78_DIR3U_PCREL
4532 ENUMX
4533   BFD_RELOC_RL78_DIFF
4534 ENUMX
4535   BFD_RELOC_RL78_GPRELB
4536 ENUMX
4537   BFD_RELOC_RL78_GPRELW
4538 ENUMX
4539   BFD_RELOC_RL78_GPRELL
4540 ENUMX
4541   BFD_RELOC_RL78_SYM
4542 ENUMX
4543   BFD_RELOC_RL78_OP_SUBTRACT
4544 ENUMX
4545   BFD_RELOC_RL78_OP_NEG
4546 ENUMX
4547   BFD_RELOC_RL78_OP_AND
4548 ENUMX
4549   BFD_RELOC_RL78_OP_SHRA
4550 ENUMX
4551   BFD_RELOC_RL78_ABS8
4552 ENUMX
4553   BFD_RELOC_RL78_ABS16
4554 ENUMX
4555   BFD_RELOC_RL78_ABS16_REV
4556 ENUMX
4557   BFD_RELOC_RL78_ABS32
4558 ENUMX
4559   BFD_RELOC_RL78_ABS32_REV
4560 ENUMX
4561   BFD_RELOC_RL78_ABS16U
4562 ENUMX
4563   BFD_RELOC_RL78_ABS16UW
4564 ENUMX
4565   BFD_RELOC_RL78_ABS16UL
4566 ENUMX
4567   BFD_RELOC_RL78_RELAX
4568 ENUMX
4569   BFD_RELOC_RL78_HI16
4570 ENUMX
4571   BFD_RELOC_RL78_HI8
4572 ENUMX
4573   BFD_RELOC_RL78_LO16
4574 ENUMX
4575   BFD_RELOC_RL78_CODE
4576 ENUMDOC
4577   Renesas RL78 Relocations.
4578
4579 ENUM
4580   BFD_RELOC_RX_NEG8
4581 ENUMX
4582   BFD_RELOC_RX_NEG16
4583 ENUMX
4584   BFD_RELOC_RX_NEG24
4585 ENUMX
4586   BFD_RELOC_RX_NEG32
4587 ENUMX
4588   BFD_RELOC_RX_16_OP
4589 ENUMX
4590   BFD_RELOC_RX_24_OP
4591 ENUMX
4592   BFD_RELOC_RX_32_OP
4593 ENUMX
4594   BFD_RELOC_RX_8U
4595 ENUMX
4596   BFD_RELOC_RX_16U
4597 ENUMX
4598   BFD_RELOC_RX_24U
4599 ENUMX
4600   BFD_RELOC_RX_DIR3U_PCREL
4601 ENUMX
4602   BFD_RELOC_RX_DIFF
4603 ENUMX
4604   BFD_RELOC_RX_GPRELB
4605 ENUMX
4606   BFD_RELOC_RX_GPRELW
4607 ENUMX
4608   BFD_RELOC_RX_GPRELL
4609 ENUMX
4610   BFD_RELOC_RX_SYM
4611 ENUMX
4612   BFD_RELOC_RX_OP_SUBTRACT
4613 ENUMX
4614   BFD_RELOC_RX_OP_NEG
4615 ENUMX
4616   BFD_RELOC_RX_ABS8
4617 ENUMX
4618   BFD_RELOC_RX_ABS16
4619 ENUMX
4620   BFD_RELOC_RX_ABS16_REV
4621 ENUMX
4622   BFD_RELOC_RX_ABS32
4623 ENUMX
4624   BFD_RELOC_RX_ABS32_REV
4625 ENUMX
4626   BFD_RELOC_RX_ABS16U
4627 ENUMX
4628   BFD_RELOC_RX_ABS16UW
4629 ENUMX
4630   BFD_RELOC_RX_ABS16UL
4631 ENUMX
4632   BFD_RELOC_RX_RELAX
4633 ENUMDOC
4634   Renesas RX Relocations.
4635
4636 ENUM
4637   BFD_RELOC_390_12
4638 ENUMDOC
4639    Direct 12 bit.
4640 ENUM
4641   BFD_RELOC_390_GOT12
4642 ENUMDOC
4643   12 bit GOT offset.
4644 ENUM
4645   BFD_RELOC_390_PLT32
4646 ENUMDOC
4647   32 bit PC relative PLT address.
4648 ENUM
4649   BFD_RELOC_390_COPY
4650 ENUMDOC
4651   Copy symbol at runtime.
4652 ENUM
4653   BFD_RELOC_390_GLOB_DAT
4654 ENUMDOC
4655   Create GOT entry.
4656 ENUM
4657   BFD_RELOC_390_JMP_SLOT
4658 ENUMDOC
4659   Create PLT entry.
4660 ENUM
4661   BFD_RELOC_390_RELATIVE
4662 ENUMDOC
4663   Adjust by program base.
4664 ENUM
4665   BFD_RELOC_390_GOTPC
4666 ENUMDOC
4667   32 bit PC relative offset to GOT.
4668 ENUM
4669   BFD_RELOC_390_GOT16
4670 ENUMDOC
4671   16 bit GOT offset.
4672 ENUM
4673   BFD_RELOC_390_PC12DBL
4674 ENUMDOC
4675   PC relative 12 bit shifted by 1.
4676 ENUM
4677   BFD_RELOC_390_PLT12DBL
4678 ENUMDOC
4679   12 bit PC rel. PLT shifted by 1.
4680 ENUM
4681   BFD_RELOC_390_PC16DBL
4682 ENUMDOC
4683   PC relative 16 bit shifted by 1.
4684 ENUM
4685   BFD_RELOC_390_PLT16DBL
4686 ENUMDOC
4687   16 bit PC rel. PLT shifted by 1.
4688 ENUM
4689   BFD_RELOC_390_PC24DBL
4690 ENUMDOC
4691   PC relative 24 bit shifted by 1.
4692 ENUM
4693   BFD_RELOC_390_PLT24DBL
4694 ENUMDOC
4695   24 bit PC rel. PLT shifted by 1.
4696 ENUM
4697   BFD_RELOC_390_PC32DBL
4698 ENUMDOC
4699   PC relative 32 bit shifted by 1.
4700 ENUM
4701   BFD_RELOC_390_PLT32DBL
4702 ENUMDOC
4703   32 bit PC rel. PLT shifted by 1.
4704 ENUM
4705   BFD_RELOC_390_GOTPCDBL
4706 ENUMDOC
4707   32 bit PC rel. GOT shifted by 1.
4708 ENUM
4709   BFD_RELOC_390_GOT64
4710 ENUMDOC
4711   64 bit GOT offset.
4712 ENUM
4713   BFD_RELOC_390_PLT64
4714 ENUMDOC
4715   64 bit PC relative PLT address.
4716 ENUM
4717   BFD_RELOC_390_GOTENT
4718 ENUMDOC
4719   32 bit rel. offset to GOT entry.
4720 ENUM
4721   BFD_RELOC_390_GOTOFF64
4722 ENUMDOC
4723   64 bit offset to GOT.
4724 ENUM
4725   BFD_RELOC_390_GOTPLT12
4726 ENUMDOC
4727   12-bit offset to symbol-entry within GOT, with PLT handling.
4728 ENUM
4729   BFD_RELOC_390_GOTPLT16
4730 ENUMDOC
4731   16-bit offset to symbol-entry within GOT, with PLT handling.
4732 ENUM
4733   BFD_RELOC_390_GOTPLT32
4734 ENUMDOC
4735   32-bit offset to symbol-entry within GOT, with PLT handling.
4736 ENUM
4737   BFD_RELOC_390_GOTPLT64
4738 ENUMDOC
4739   64-bit offset to symbol-entry within GOT, with PLT handling.
4740 ENUM
4741   BFD_RELOC_390_GOTPLTENT
4742 ENUMDOC
4743   32-bit rel. offset to symbol-entry within GOT, with PLT handling.
4744 ENUM
4745   BFD_RELOC_390_PLTOFF16
4746 ENUMDOC
4747   16-bit rel. offset from the GOT to a PLT entry.
4748 ENUM
4749   BFD_RELOC_390_PLTOFF32
4750 ENUMDOC
4751   32-bit rel. offset from the GOT to a PLT entry.
4752 ENUM
4753   BFD_RELOC_390_PLTOFF64
4754 ENUMDOC
4755   64-bit rel. offset from the GOT to a PLT entry.
4756
4757 ENUM
4758   BFD_RELOC_390_TLS_LOAD
4759 ENUMX
4760   BFD_RELOC_390_TLS_GDCALL
4761 ENUMX
4762   BFD_RELOC_390_TLS_LDCALL
4763 ENUMX
4764   BFD_RELOC_390_TLS_GD32
4765 ENUMX
4766   BFD_RELOC_390_TLS_GD64
4767 ENUMX
4768   BFD_RELOC_390_TLS_GOTIE12
4769 ENUMX
4770   BFD_RELOC_390_TLS_GOTIE32
4771 ENUMX
4772   BFD_RELOC_390_TLS_GOTIE64
4773 ENUMX
4774   BFD_RELOC_390_TLS_LDM32
4775 ENUMX
4776   BFD_RELOC_390_TLS_LDM64
4777 ENUMX
4778   BFD_RELOC_390_TLS_IE32
4779 ENUMX
4780   BFD_RELOC_390_TLS_IE64
4781 ENUMX
4782   BFD_RELOC_390_TLS_IEENT
4783 ENUMX
4784   BFD_RELOC_390_TLS_LE32
4785 ENUMX
4786   BFD_RELOC_390_TLS_LE64
4787 ENUMX
4788   BFD_RELOC_390_TLS_LDO32
4789 ENUMX
4790   BFD_RELOC_390_TLS_LDO64
4791 ENUMX
4792   BFD_RELOC_390_TLS_DTPMOD
4793 ENUMX
4794   BFD_RELOC_390_TLS_DTPOFF
4795 ENUMX
4796   BFD_RELOC_390_TLS_TPOFF
4797 ENUMDOC
4798   s390 tls relocations.
4799
4800 ENUM
4801   BFD_RELOC_390_20
4802 ENUMX
4803   BFD_RELOC_390_GOT20
4804 ENUMX
4805   BFD_RELOC_390_GOTPLT20
4806 ENUMX
4807   BFD_RELOC_390_TLS_GOTIE20
4808 ENUMDOC
4809   Long displacement extension.
4810
4811 ENUM
4812   BFD_RELOC_390_IRELATIVE
4813 ENUMDOC
4814   STT_GNU_IFUNC relocation.
4815
4816 ENUM
4817   BFD_RELOC_SCORE_GPREL15
4818 ENUMDOC
4819   Score relocations
4820   Low 16 bit for load/store
4821 ENUM
4822   BFD_RELOC_SCORE_DUMMY2
4823 ENUMX
4824   BFD_RELOC_SCORE_JMP
4825 ENUMDOC
4826   This is a 24-bit reloc with the right 1 bit assumed to be 0
4827 ENUM
4828   BFD_RELOC_SCORE_BRANCH
4829 ENUMDOC
4830   This is a 19-bit reloc with the right 1 bit assumed to be 0
4831 ENUM
4832   BFD_RELOC_SCORE_IMM30
4833 ENUMDOC
4834   This is a 32-bit reloc for 48-bit instructions.
4835 ENUM
4836   BFD_RELOC_SCORE_IMM32
4837 ENUMDOC
4838   This is a 32-bit reloc for 48-bit instructions.
4839 ENUM
4840   BFD_RELOC_SCORE16_JMP
4841 ENUMDOC
4842   This is a 11-bit reloc with the right 1 bit assumed to be 0
4843 ENUM
4844   BFD_RELOC_SCORE16_BRANCH
4845 ENUMDOC
4846   This is a 8-bit reloc with the right 1 bit assumed to be 0
4847 ENUM
4848   BFD_RELOC_SCORE_BCMP
4849 ENUMDOC
4850    This is a 9-bit reloc with the right 1 bit assumed to be 0
4851 ENUM
4852   BFD_RELOC_SCORE_GOT15
4853 ENUMX
4854   BFD_RELOC_SCORE_GOT_LO16
4855 ENUMX
4856   BFD_RELOC_SCORE_CALL15
4857 ENUMX
4858   BFD_RELOC_SCORE_DUMMY_HI16
4859 ENUMDOC
4860   Undocumented Score relocs
4861
4862 ENUM
4863   BFD_RELOC_IP2K_FR9
4864 ENUMDOC
4865   Scenix IP2K - 9-bit register number / data address
4866 ENUM
4867   BFD_RELOC_IP2K_BANK
4868 ENUMDOC
4869   Scenix IP2K - 4-bit register/data bank number
4870 ENUM
4871   BFD_RELOC_IP2K_ADDR16CJP
4872 ENUMDOC
4873   Scenix IP2K - low 13 bits of instruction word address
4874 ENUM
4875   BFD_RELOC_IP2K_PAGE3
4876 ENUMDOC
4877   Scenix IP2K - high 3 bits of instruction word address
4878 ENUM
4879   BFD_RELOC_IP2K_LO8DATA
4880 ENUMX
4881   BFD_RELOC_IP2K_HI8DATA
4882 ENUMX
4883   BFD_RELOC_IP2K_EX8DATA
4884 ENUMDOC
4885   Scenix IP2K - ext/low/high 8 bits of data address
4886 ENUM
4887   BFD_RELOC_IP2K_LO8INSN
4888 ENUMX
4889   BFD_RELOC_IP2K_HI8INSN
4890 ENUMDOC
4891   Scenix IP2K - low/high 8 bits of instruction word address
4892 ENUM
4893   BFD_RELOC_IP2K_PC_SKIP
4894 ENUMDOC
4895   Scenix IP2K - even/odd PC modifier to modify snb pcl.0
4896 ENUM
4897   BFD_RELOC_IP2K_TEXT
4898 ENUMDOC
4899   Scenix IP2K - 16 bit word address in text section.
4900 ENUM
4901   BFD_RELOC_IP2K_FR_OFFSET
4902 ENUMDOC
4903   Scenix IP2K - 7-bit sp or dp offset
4904 ENUM
4905   BFD_RELOC_VPE4KMATH_DATA
4906 ENUMX
4907   BFD_RELOC_VPE4KMATH_INSN
4908 ENUMDOC
4909   Scenix VPE4K coprocessor - data/insn-space addressing
4910
4911 ENUM
4912   BFD_RELOC_VTABLE_INHERIT
4913 ENUMX
4914   BFD_RELOC_VTABLE_ENTRY
4915 ENUMDOC
4916   These two relocations are used by the linker to determine which of
4917   the entries in a C++ virtual function table are actually used.  When
4918   the --gc-sections option is given, the linker will zero out the entries
4919   that are not used, so that the code for those functions need not be
4920   included in the output.
4921
4922   VTABLE_INHERIT is a zero-space relocation used to describe to the
4923   linker the inheritance tree of a C++ virtual function table.  The
4924   relocation's symbol should be the parent class' vtable, and the
4925   relocation should be located at the child vtable.
4926
4927   VTABLE_ENTRY is a zero-space relocation that describes the use of a
4928   virtual function table entry.  The reloc's symbol should refer to the
4929   table of the class mentioned in the code.  Off of that base, an offset
4930   describes the entry that is being used.  For Rela hosts, this offset
4931   is stored in the reloc's addend.  For Rel hosts, we are forced to put
4932   this offset in the reloc's section offset.
4933
4934 ENUM
4935   BFD_RELOC_IA64_IMM14
4936 ENUMX
4937   BFD_RELOC_IA64_IMM22
4938 ENUMX
4939   BFD_RELOC_IA64_IMM64
4940 ENUMX
4941   BFD_RELOC_IA64_DIR32MSB
4942 ENUMX
4943   BFD_RELOC_IA64_DIR32LSB
4944 ENUMX
4945   BFD_RELOC_IA64_DIR64MSB
4946 ENUMX
4947   BFD_RELOC_IA64_DIR64LSB
4948 ENUMX
4949   BFD_RELOC_IA64_GPREL22
4950 ENUMX
4951   BFD_RELOC_IA64_GPREL64I
4952 ENUMX
4953   BFD_RELOC_IA64_GPREL32MSB
4954 ENUMX
4955   BFD_RELOC_IA64_GPREL32LSB
4956 ENUMX
4957   BFD_RELOC_IA64_GPREL64MSB
4958 ENUMX
4959   BFD_RELOC_IA64_GPREL64LSB
4960 ENUMX
4961   BFD_RELOC_IA64_LTOFF22
4962 ENUMX
4963   BFD_RELOC_IA64_LTOFF64I
4964 ENUMX
4965   BFD_RELOC_IA64_PLTOFF22
4966 ENUMX
4967   BFD_RELOC_IA64_PLTOFF64I
4968 ENUMX
4969   BFD_RELOC_IA64_PLTOFF64MSB
4970 ENUMX
4971   BFD_RELOC_IA64_PLTOFF64LSB
4972 ENUMX
4973   BFD_RELOC_IA64_FPTR64I
4974 ENUMX
4975   BFD_RELOC_IA64_FPTR32MSB
4976 ENUMX
4977   BFD_RELOC_IA64_FPTR32LSB
4978 ENUMX
4979   BFD_RELOC_IA64_FPTR64MSB
4980 ENUMX
4981   BFD_RELOC_IA64_FPTR64LSB
4982 ENUMX
4983   BFD_RELOC_IA64_PCREL21B
4984 ENUMX
4985   BFD_RELOC_IA64_PCREL21BI
4986 ENUMX
4987   BFD_RELOC_IA64_PCREL21M
4988 ENUMX
4989   BFD_RELOC_IA64_PCREL21F
4990 ENUMX
4991   BFD_RELOC_IA64_PCREL22
4992 ENUMX
4993   BFD_RELOC_IA64_PCREL60B
4994 ENUMX
4995   BFD_RELOC_IA64_PCREL64I
4996 ENUMX
4997   BFD_RELOC_IA64_PCREL32MSB
4998 ENUMX
4999   BFD_RELOC_IA64_PCREL32LSB
5000 ENUMX
5001   BFD_RELOC_IA64_PCREL64MSB
5002 ENUMX
5003   BFD_RELOC_IA64_PCREL64LSB
5004 ENUMX
5005   BFD_RELOC_IA64_LTOFF_FPTR22
5006 ENUMX
5007   BFD_RELOC_IA64_LTOFF_FPTR64I
5008 ENUMX
5009   BFD_RELOC_IA64_LTOFF_FPTR32MSB
5010 ENUMX
5011   BFD_RELOC_IA64_LTOFF_FPTR32LSB
5012 ENUMX
5013   BFD_RELOC_IA64_LTOFF_FPTR64MSB
5014 ENUMX
5015   BFD_RELOC_IA64_LTOFF_FPTR64LSB
5016 ENUMX
5017   BFD_RELOC_IA64_SEGREL32MSB
5018 ENUMX
5019   BFD_RELOC_IA64_SEGREL32LSB
5020 ENUMX
5021   BFD_RELOC_IA64_SEGREL64MSB
5022 ENUMX
5023   BFD_RELOC_IA64_SEGREL64LSB
5024 ENUMX
5025   BFD_RELOC_IA64_SECREL32MSB
5026 ENUMX
5027   BFD_RELOC_IA64_SECREL32LSB
5028 ENUMX
5029   BFD_RELOC_IA64_SECREL64MSB
5030 ENUMX
5031   BFD_RELOC_IA64_SECREL64LSB
5032 ENUMX
5033   BFD_RELOC_IA64_REL32MSB
5034 ENUMX
5035   BFD_RELOC_IA64_REL32LSB
5036 ENUMX
5037   BFD_RELOC_IA64_REL64MSB
5038 ENUMX
5039   BFD_RELOC_IA64_REL64LSB
5040 ENUMX
5041   BFD_RELOC_IA64_LTV32MSB
5042 ENUMX
5043   BFD_RELOC_IA64_LTV32LSB
5044 ENUMX
5045   BFD_RELOC_IA64_LTV64MSB
5046 ENUMX
5047   BFD_RELOC_IA64_LTV64LSB
5048 ENUMX
5049   BFD_RELOC_IA64_IPLTMSB
5050 ENUMX
5051   BFD_RELOC_IA64_IPLTLSB
5052 ENUMX
5053   BFD_RELOC_IA64_COPY
5054 ENUMX
5055   BFD_RELOC_IA64_LTOFF22X
5056 ENUMX
5057   BFD_RELOC_IA64_LDXMOV
5058 ENUMX
5059   BFD_RELOC_IA64_TPREL14
5060 ENUMX
5061   BFD_RELOC_IA64_TPREL22
5062 ENUMX
5063   BFD_RELOC_IA64_TPREL64I
5064 ENUMX
5065   BFD_RELOC_IA64_TPREL64MSB
5066 ENUMX
5067   BFD_RELOC_IA64_TPREL64LSB
5068 ENUMX
5069   BFD_RELOC_IA64_LTOFF_TPREL22
5070 ENUMX
5071   BFD_RELOC_IA64_DTPMOD64MSB
5072 ENUMX
5073   BFD_RELOC_IA64_DTPMOD64LSB
5074 ENUMX
5075   BFD_RELOC_IA64_LTOFF_DTPMOD22
5076 ENUMX
5077   BFD_RELOC_IA64_DTPREL14
5078 ENUMX
5079   BFD_RELOC_IA64_DTPREL22
5080 ENUMX
5081   BFD_RELOC_IA64_DTPREL64I
5082 ENUMX
5083   BFD_RELOC_IA64_DTPREL32MSB
5084 ENUMX
5085   BFD_RELOC_IA64_DTPREL32LSB
5086 ENUMX
5087   BFD_RELOC_IA64_DTPREL64MSB
5088 ENUMX
5089   BFD_RELOC_IA64_DTPREL64LSB
5090 ENUMX
5091   BFD_RELOC_IA64_LTOFF_DTPREL22
5092 ENUMDOC
5093   Intel IA64 Relocations.
5094
5095 ENUM
5096   BFD_RELOC_M68HC11_HI8
5097 ENUMDOC
5098   Motorola 68HC11 reloc.
5099   This is the 8 bit high part of an absolute address.
5100 ENUM
5101   BFD_RELOC_M68HC11_LO8
5102 ENUMDOC
5103   Motorola 68HC11 reloc.
5104   This is the 8 bit low part of an absolute address.
5105 ENUM
5106   BFD_RELOC_M68HC11_3B
5107 ENUMDOC
5108   Motorola 68HC11 reloc.
5109   This is the 3 bit of a value.
5110 ENUM
5111   BFD_RELOC_M68HC11_RL_JUMP
5112 ENUMDOC
5113   Motorola 68HC11 reloc.
5114   This reloc marks the beginning of a jump/call instruction.
5115   It is used for linker relaxation to correctly identify beginning
5116   of instruction and change some branches to use PC-relative
5117   addressing mode.
5118 ENUM
5119   BFD_RELOC_M68HC11_RL_GROUP
5120 ENUMDOC
5121   Motorola 68HC11 reloc.
5122   This reloc marks a group of several instructions that gcc generates
5123   and for which the linker relaxation pass can modify and/or remove
5124   some of them.
5125 ENUM
5126   BFD_RELOC_M68HC11_LO16
5127 ENUMDOC
5128   Motorola 68HC11 reloc.
5129   This is the 16-bit lower part of an address.  It is used for 'call'
5130   instruction to specify the symbol address without any special
5131   transformation (due to memory bank window).
5132 ENUM
5133   BFD_RELOC_M68HC11_PAGE
5134 ENUMDOC
5135   Motorola 68HC11 reloc.
5136   This is a 8-bit reloc that specifies the page number of an address.
5137   It is used by 'call' instruction to specify the page number of
5138   the symbol.
5139 ENUM
5140   BFD_RELOC_M68HC11_24
5141 ENUMDOC
5142   Motorola 68HC11 reloc.
5143   This is a 24-bit reloc that represents the address with a 16-bit
5144   value and a 8-bit page number.  The symbol address is transformed
5145   to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
5146 ENUM
5147   BFD_RELOC_M68HC12_5B
5148 ENUMDOC
5149   Motorola 68HC12 reloc.
5150   This is the 5 bits of a value.
5151 ENUM
5152   BFD_RELOC_XGATE_RL_JUMP
5153 ENUMDOC
5154   Freescale XGATE reloc.
5155   This reloc marks the beginning of a bra/jal instruction.
5156 ENUM
5157   BFD_RELOC_XGATE_RL_GROUP
5158 ENUMDOC
5159   Freescale XGATE reloc.
5160   This reloc marks a group of several instructions that gcc generates
5161   and for which the linker relaxation pass can modify and/or remove
5162   some of them.
5163 ENUM
5164   BFD_RELOC_XGATE_LO16
5165 ENUMDOC
5166   Freescale XGATE reloc.
5167   This is the 16-bit lower part of an address.  It is used for the '16-bit'
5168   instructions.
5169 ENUM
5170   BFD_RELOC_XGATE_GPAGE
5171 ENUMDOC
5172   Freescale XGATE reloc.
5173 ENUM
5174   BFD_RELOC_XGATE_24
5175 ENUMDOC
5176   Freescale XGATE reloc.
5177 ENUM
5178   BFD_RELOC_XGATE_PCREL_9
5179 ENUMDOC
5180   Freescale XGATE reloc.
5181   This is a 9-bit pc-relative reloc.
5182 ENUM
5183   BFD_RELOC_XGATE_PCREL_10
5184 ENUMDOC
5185   Freescale XGATE reloc.
5186   This is a 10-bit pc-relative reloc.
5187 ENUM
5188   BFD_RELOC_XGATE_IMM8_LO
5189 ENUMDOC
5190   Freescale XGATE reloc.
5191   This is the 16-bit lower part of an address.  It is used for the '16-bit'
5192   instructions.
5193 ENUM
5194   BFD_RELOC_XGATE_IMM8_HI
5195 ENUMDOC
5196   Freescale XGATE reloc.
5197   This is the 16-bit higher part of an address.  It is used for the '16-bit'
5198   instructions.
5199 ENUM
5200   BFD_RELOC_XGATE_IMM3
5201 ENUMDOC
5202   Freescale XGATE reloc.
5203   This is a 3-bit pc-relative reloc.
5204 ENUM
5205   BFD_RELOC_XGATE_IMM4
5206 ENUMDOC
5207   Freescale XGATE reloc.
5208   This is a 4-bit pc-relative reloc.
5209 ENUM
5210   BFD_RELOC_XGATE_IMM5
5211 ENUMDOC
5212   Freescale XGATE reloc.
5213   This is a 5-bit pc-relative reloc.
5214 ENUM
5215   BFD_RELOC_M68HC12_9B
5216 ENUMDOC
5217   Motorola 68HC12 reloc.
5218   This is the 9 bits of a value.
5219 ENUM
5220   BFD_RELOC_M68HC12_16B
5221 ENUMDOC
5222   Motorola 68HC12 reloc.
5223   This is the 16 bits of a value.
5224 ENUM
5225   BFD_RELOC_M68HC12_9_PCREL
5226 ENUMDOC
5227   Motorola 68HC12/XGATE reloc.
5228   This is a PCREL9 branch.
5229 ENUM
5230   BFD_RELOC_M68HC12_10_PCREL
5231 ENUMDOC
5232   Motorola 68HC12/XGATE reloc.
5233   This is a PCREL10 branch.
5234 ENUM
5235   BFD_RELOC_M68HC12_LO8XG
5236 ENUMDOC
5237   Motorola 68HC12/XGATE reloc.
5238   This is the 8 bit low part of an absolute address and immediately precedes
5239   a matching HI8XG part.
5240 ENUM
5241   BFD_RELOC_M68HC12_HI8XG
5242 ENUMDOC
5243   Motorola 68HC12/XGATE reloc.
5244   This is the 8 bit high part of an absolute address and immediately follows
5245   a matching LO8XG part.
5246 ENUM
5247   BFD_RELOC_16C_NUM08
5248 ENUMX
5249   BFD_RELOC_16C_NUM08_C
5250 ENUMX
5251   BFD_RELOC_16C_NUM16
5252 ENUMX
5253   BFD_RELOC_16C_NUM16_C
5254 ENUMX
5255   BFD_RELOC_16C_NUM32
5256 ENUMX
5257   BFD_RELOC_16C_NUM32_C
5258 ENUMX
5259   BFD_RELOC_16C_DISP04
5260 ENUMX
5261   BFD_RELOC_16C_DISP04_C
5262 ENUMX
5263   BFD_RELOC_16C_DISP08
5264 ENUMX
5265   BFD_RELOC_16C_DISP08_C
5266 ENUMX
5267   BFD_RELOC_16C_DISP16
5268 ENUMX
5269   BFD_RELOC_16C_DISP16_C
5270 ENUMX
5271   BFD_RELOC_16C_DISP24
5272 ENUMX
5273   BFD_RELOC_16C_DISP24_C
5274 ENUMX
5275   BFD_RELOC_16C_DISP24a
5276 ENUMX
5277   BFD_RELOC_16C_DISP24a_C
5278 ENUMX
5279   BFD_RELOC_16C_REG04
5280 ENUMX
5281   BFD_RELOC_16C_REG04_C
5282 ENUMX
5283   BFD_RELOC_16C_REG04a
5284 ENUMX
5285   BFD_RELOC_16C_REG04a_C
5286 ENUMX
5287   BFD_RELOC_16C_REG14
5288 ENUMX
5289   BFD_RELOC_16C_REG14_C
5290 ENUMX
5291   BFD_RELOC_16C_REG16
5292 ENUMX
5293   BFD_RELOC_16C_REG16_C
5294 ENUMX
5295   BFD_RELOC_16C_REG20
5296 ENUMX
5297   BFD_RELOC_16C_REG20_C
5298 ENUMX
5299   BFD_RELOC_16C_ABS20
5300 ENUMX
5301   BFD_RELOC_16C_ABS20_C
5302 ENUMX
5303   BFD_RELOC_16C_ABS24
5304 ENUMX
5305   BFD_RELOC_16C_ABS24_C
5306 ENUMX
5307   BFD_RELOC_16C_IMM04
5308 ENUMX
5309   BFD_RELOC_16C_IMM04_C
5310 ENUMX
5311   BFD_RELOC_16C_IMM16
5312 ENUMX
5313   BFD_RELOC_16C_IMM16_C
5314 ENUMX
5315   BFD_RELOC_16C_IMM20
5316 ENUMX
5317   BFD_RELOC_16C_IMM20_C
5318 ENUMX
5319   BFD_RELOC_16C_IMM24
5320 ENUMX
5321   BFD_RELOC_16C_IMM24_C
5322 ENUMX
5323   BFD_RELOC_16C_IMM32
5324 ENUMX
5325   BFD_RELOC_16C_IMM32_C
5326 ENUMDOC
5327   NS CR16C Relocations.
5328
5329 ENUM
5330   BFD_RELOC_CR16_NUM8
5331 ENUMX
5332   BFD_RELOC_CR16_NUM16
5333 ENUMX
5334   BFD_RELOC_CR16_NUM32
5335 ENUMX
5336   BFD_RELOC_CR16_NUM32a
5337 ENUMX
5338   BFD_RELOC_CR16_REGREL0
5339 ENUMX
5340   BFD_RELOC_CR16_REGREL4
5341 ENUMX
5342   BFD_RELOC_CR16_REGREL4a
5343 ENUMX
5344   BFD_RELOC_CR16_REGREL14
5345 ENUMX
5346   BFD_RELOC_CR16_REGREL14a
5347 ENUMX
5348   BFD_RELOC_CR16_REGREL16
5349 ENUMX
5350   BFD_RELOC_CR16_REGREL20
5351 ENUMX
5352   BFD_RELOC_CR16_REGREL20a
5353 ENUMX
5354   BFD_RELOC_CR16_ABS20
5355 ENUMX
5356   BFD_RELOC_CR16_ABS24
5357 ENUMX
5358   BFD_RELOC_CR16_IMM4
5359 ENUMX
5360   BFD_RELOC_CR16_IMM8
5361 ENUMX
5362   BFD_RELOC_CR16_IMM16
5363 ENUMX
5364   BFD_RELOC_CR16_IMM20
5365 ENUMX
5366   BFD_RELOC_CR16_IMM24
5367 ENUMX
5368   BFD_RELOC_CR16_IMM32
5369 ENUMX
5370   BFD_RELOC_CR16_IMM32a
5371 ENUMX
5372   BFD_RELOC_CR16_DISP4
5373 ENUMX
5374   BFD_RELOC_CR16_DISP8
5375 ENUMX
5376   BFD_RELOC_CR16_DISP16
5377 ENUMX
5378   BFD_RELOC_CR16_DISP20
5379 ENUMX
5380   BFD_RELOC_CR16_DISP24
5381 ENUMX
5382   BFD_RELOC_CR16_DISP24a
5383 ENUMX
5384   BFD_RELOC_CR16_SWITCH8
5385 ENUMX
5386   BFD_RELOC_CR16_SWITCH16
5387 ENUMX
5388   BFD_RELOC_CR16_SWITCH32
5389 ENUMX
5390   BFD_RELOC_CR16_GOT_REGREL20
5391 ENUMX
5392   BFD_RELOC_CR16_GOTC_REGREL20
5393 ENUMX
5394   BFD_RELOC_CR16_GLOB_DAT
5395 ENUMDOC
5396   NS CR16 Relocations.
5397
5398 ENUM
5399   BFD_RELOC_CRX_REL4
5400 ENUMX
5401   BFD_RELOC_CRX_REL8
5402 ENUMX
5403   BFD_RELOC_CRX_REL8_CMP
5404 ENUMX
5405   BFD_RELOC_CRX_REL16
5406 ENUMX
5407   BFD_RELOC_CRX_REL24
5408 ENUMX
5409   BFD_RELOC_CRX_REL32
5410 ENUMX
5411   BFD_RELOC_CRX_REGREL12
5412 ENUMX
5413   BFD_RELOC_CRX_REGREL22
5414 ENUMX
5415   BFD_RELOC_CRX_REGREL28
5416 ENUMX
5417   BFD_RELOC_CRX_REGREL32
5418 ENUMX
5419   BFD_RELOC_CRX_ABS16
5420 ENUMX
5421   BFD_RELOC_CRX_ABS32
5422 ENUMX
5423   BFD_RELOC_CRX_NUM8
5424 ENUMX
5425   BFD_RELOC_CRX_NUM16
5426 ENUMX
5427   BFD_RELOC_CRX_NUM32
5428 ENUMX
5429   BFD_RELOC_CRX_IMM16
5430 ENUMX
5431   BFD_RELOC_CRX_IMM32
5432 ENUMX
5433   BFD_RELOC_CRX_SWITCH8
5434 ENUMX
5435   BFD_RELOC_CRX_SWITCH16
5436 ENUMX
5437   BFD_RELOC_CRX_SWITCH32
5438 ENUMDOC
5439   NS CRX Relocations.
5440
5441 ENUM
5442   BFD_RELOC_CRIS_BDISP8
5443 ENUMX
5444   BFD_RELOC_CRIS_UNSIGNED_5
5445 ENUMX
5446   BFD_RELOC_CRIS_SIGNED_6
5447 ENUMX
5448   BFD_RELOC_CRIS_UNSIGNED_6
5449 ENUMX
5450   BFD_RELOC_CRIS_SIGNED_8
5451 ENUMX
5452   BFD_RELOC_CRIS_UNSIGNED_8
5453 ENUMX
5454   BFD_RELOC_CRIS_SIGNED_16
5455 ENUMX
5456   BFD_RELOC_CRIS_UNSIGNED_16
5457 ENUMX
5458   BFD_RELOC_CRIS_LAPCQ_OFFSET
5459 ENUMX
5460   BFD_RELOC_CRIS_UNSIGNED_4
5461 ENUMDOC
5462   These relocs are only used within the CRIS assembler.  They are not
5463   (at present) written to any object files.
5464 ENUM
5465   BFD_RELOC_CRIS_COPY
5466 ENUMX
5467   BFD_RELOC_CRIS_GLOB_DAT
5468 ENUMX
5469   BFD_RELOC_CRIS_JUMP_SLOT
5470 ENUMX
5471   BFD_RELOC_CRIS_RELATIVE
5472 ENUMDOC
5473   Relocs used in ELF shared libraries for CRIS.
5474 ENUM
5475   BFD_RELOC_CRIS_32_GOT
5476 ENUMDOC
5477   32-bit offset to symbol-entry within GOT.
5478 ENUM
5479   BFD_RELOC_CRIS_16_GOT
5480 ENUMDOC
5481   16-bit offset to symbol-entry within GOT.
5482 ENUM
5483   BFD_RELOC_CRIS_32_GOTPLT
5484 ENUMDOC
5485   32-bit offset to symbol-entry within GOT, with PLT handling.
5486 ENUM
5487   BFD_RELOC_CRIS_16_GOTPLT
5488 ENUMDOC
5489   16-bit offset to symbol-entry within GOT, with PLT handling.
5490 ENUM
5491   BFD_RELOC_CRIS_32_GOTREL
5492 ENUMDOC
5493   32-bit offset to symbol, relative to GOT.
5494 ENUM
5495   BFD_RELOC_CRIS_32_PLT_GOTREL
5496 ENUMDOC
5497   32-bit offset to symbol with PLT entry, relative to GOT.
5498 ENUM
5499   BFD_RELOC_CRIS_32_PLT_PCREL
5500 ENUMDOC
5501   32-bit offset to symbol with PLT entry, relative to this relocation.
5502
5503 ENUM
5504   BFD_RELOC_CRIS_32_GOT_GD
5505 ENUMX
5506   BFD_RELOC_CRIS_16_GOT_GD
5507 ENUMX
5508   BFD_RELOC_CRIS_32_GD
5509 ENUMX
5510   BFD_RELOC_CRIS_DTP
5511 ENUMX
5512   BFD_RELOC_CRIS_32_DTPREL
5513 ENUMX
5514   BFD_RELOC_CRIS_16_DTPREL
5515 ENUMX
5516   BFD_RELOC_CRIS_32_GOT_TPREL
5517 ENUMX
5518   BFD_RELOC_CRIS_16_GOT_TPREL
5519 ENUMX
5520   BFD_RELOC_CRIS_32_TPREL
5521 ENUMX
5522   BFD_RELOC_CRIS_16_TPREL
5523 ENUMX
5524   BFD_RELOC_CRIS_DTPMOD
5525 ENUMX
5526   BFD_RELOC_CRIS_32_IE
5527 ENUMDOC
5528   Relocs used in TLS code for CRIS.
5529
5530 ENUM
5531   BFD_RELOC_860_COPY
5532 ENUMX
5533   BFD_RELOC_860_GLOB_DAT
5534 ENUMX
5535   BFD_RELOC_860_JUMP_SLOT
5536 ENUMX
5537   BFD_RELOC_860_RELATIVE
5538 ENUMX
5539   BFD_RELOC_860_PC26
5540 ENUMX
5541   BFD_RELOC_860_PLT26
5542 ENUMX
5543   BFD_RELOC_860_PC16
5544 ENUMX
5545   BFD_RELOC_860_LOW0
5546 ENUMX
5547   BFD_RELOC_860_SPLIT0
5548 ENUMX
5549   BFD_RELOC_860_LOW1
5550 ENUMX
5551   BFD_RELOC_860_SPLIT1
5552 ENUMX
5553   BFD_RELOC_860_LOW2
5554 ENUMX
5555   BFD_RELOC_860_SPLIT2
5556 ENUMX
5557   BFD_RELOC_860_LOW3
5558 ENUMX
5559   BFD_RELOC_860_LOGOT0
5560 ENUMX
5561   BFD_RELOC_860_SPGOT0
5562 ENUMX
5563   BFD_RELOC_860_LOGOT1
5564 ENUMX
5565   BFD_RELOC_860_SPGOT1
5566 ENUMX
5567   BFD_RELOC_860_LOGOTOFF0
5568 ENUMX
5569   BFD_RELOC_860_SPGOTOFF0
5570 ENUMX
5571   BFD_RELOC_860_LOGOTOFF1
5572 ENUMX
5573   BFD_RELOC_860_SPGOTOFF1
5574 ENUMX
5575   BFD_RELOC_860_LOGOTOFF2
5576 ENUMX
5577   BFD_RELOC_860_LOGOTOFF3
5578 ENUMX
5579   BFD_RELOC_860_LOPC
5580 ENUMX
5581   BFD_RELOC_860_HIGHADJ
5582 ENUMX
5583   BFD_RELOC_860_HAGOT
5584 ENUMX
5585   BFD_RELOC_860_HAGOTOFF
5586 ENUMX
5587   BFD_RELOC_860_HAPC
5588 ENUMX
5589   BFD_RELOC_860_HIGH
5590 ENUMX
5591   BFD_RELOC_860_HIGOT
5592 ENUMX
5593   BFD_RELOC_860_HIGOTOFF
5594 ENUMDOC
5595   Intel i860 Relocations.
5596
5597 ENUM
5598   BFD_RELOC_OPENRISC_ABS_26
5599 ENUMX
5600   BFD_RELOC_OPENRISC_REL_26
5601 ENUMDOC
5602   OpenRISC Relocations.
5603
5604 ENUM
5605   BFD_RELOC_H8_DIR16A8
5606 ENUMX
5607   BFD_RELOC_H8_DIR16R8
5608 ENUMX
5609   BFD_RELOC_H8_DIR24A8
5610 ENUMX
5611   BFD_RELOC_H8_DIR24R8
5612 ENUMX
5613   BFD_RELOC_H8_DIR32A16
5614 ENUMX
5615   BFD_RELOC_H8_DISP32A16
5616 ENUMDOC
5617   H8 elf Relocations.
5618
5619 ENUM
5620   BFD_RELOC_XSTORMY16_REL_12
5621 ENUMX
5622   BFD_RELOC_XSTORMY16_12
5623 ENUMX
5624   BFD_RELOC_XSTORMY16_24
5625 ENUMX
5626   BFD_RELOC_XSTORMY16_FPTR16
5627 ENUMDOC
5628   Sony Xstormy16 Relocations.
5629
5630 ENUM
5631   BFD_RELOC_RELC
5632 ENUMDOC
5633   Self-describing complex relocations.
5634 COMMENT
5635
5636 ENUM
5637   BFD_RELOC_XC16X_PAG
5638 ENUMX
5639   BFD_RELOC_XC16X_POF
5640 ENUMX
5641   BFD_RELOC_XC16X_SEG
5642 ENUMX
5643   BFD_RELOC_XC16X_SOF
5644 ENUMDOC
5645   Infineon Relocations.
5646
5647 ENUM
5648   BFD_RELOC_VAX_GLOB_DAT
5649 ENUMX
5650   BFD_RELOC_VAX_JMP_SLOT
5651 ENUMX
5652   BFD_RELOC_VAX_RELATIVE
5653 ENUMDOC
5654   Relocations used by VAX ELF.
5655
5656 ENUM
5657   BFD_RELOC_MT_PC16
5658 ENUMDOC
5659   Morpho MT - 16 bit immediate relocation.
5660 ENUM
5661   BFD_RELOC_MT_HI16
5662 ENUMDOC
5663   Morpho MT - Hi 16 bits of an address.
5664 ENUM
5665   BFD_RELOC_MT_LO16
5666 ENUMDOC
5667   Morpho MT - Low 16 bits of an address.
5668 ENUM
5669   BFD_RELOC_MT_GNU_VTINHERIT
5670 ENUMDOC
5671   Morpho MT - Used to tell the linker which vtable entries are used.
5672 ENUM
5673   BFD_RELOC_MT_GNU_VTENTRY
5674 ENUMDOC
5675   Morpho MT - Used to tell the linker which vtable entries are used.
5676 ENUM
5677   BFD_RELOC_MT_PCINSN8
5678 ENUMDOC
5679   Morpho MT - 8 bit immediate relocation.
5680
5681 ENUM
5682   BFD_RELOC_MSP430_10_PCREL
5683 ENUMX
5684   BFD_RELOC_MSP430_16_PCREL
5685 ENUMX
5686   BFD_RELOC_MSP430_16
5687 ENUMX
5688   BFD_RELOC_MSP430_16_PCREL_BYTE
5689 ENUMX
5690   BFD_RELOC_MSP430_16_BYTE
5691 ENUMX
5692   BFD_RELOC_MSP430_2X_PCREL
5693 ENUMX
5694   BFD_RELOC_MSP430_RL_PCREL
5695 ENUMX
5696   BFD_RELOC_MSP430_ABS8
5697 ENUMX
5698   BFD_RELOC_MSP430X_PCR20_EXT_SRC
5699 ENUMX
5700   BFD_RELOC_MSP430X_PCR20_EXT_DST
5701 ENUMX
5702   BFD_RELOC_MSP430X_PCR20_EXT_ODST
5703 ENUMX
5704   BFD_RELOC_MSP430X_ABS20_EXT_SRC
5705 ENUMX
5706   BFD_RELOC_MSP430X_ABS20_EXT_DST
5707 ENUMX
5708   BFD_RELOC_MSP430X_ABS20_EXT_ODST
5709 ENUMX
5710   BFD_RELOC_MSP430X_ABS20_ADR_SRC
5711 ENUMX
5712   BFD_RELOC_MSP430X_ABS20_ADR_DST
5713 ENUMX
5714   BFD_RELOC_MSP430X_PCR16
5715 ENUMX
5716   BFD_RELOC_MSP430X_PCR20_CALL
5717 ENUMX
5718   BFD_RELOC_MSP430X_ABS16
5719 ENUMX
5720   BFD_RELOC_MSP430_ABS_HI16
5721 ENUMX
5722   BFD_RELOC_MSP430_PREL31
5723 ENUMX
5724   BFD_RELOC_MSP430_SYM_DIFF
5725 ENUMDOC
5726   msp430 specific relocation codes
5727
5728 ENUM
5729   BFD_RELOC_NIOS2_S16
5730 ENUMX
5731   BFD_RELOC_NIOS2_U16
5732 ENUMX
5733   BFD_RELOC_NIOS2_CALL26
5734 ENUMX
5735   BFD_RELOC_NIOS2_IMM5
5736 ENUMX
5737   BFD_RELOC_NIOS2_CACHE_OPX
5738 ENUMX
5739   BFD_RELOC_NIOS2_IMM6
5740 ENUMX
5741   BFD_RELOC_NIOS2_IMM8
5742 ENUMX
5743   BFD_RELOC_NIOS2_HI16
5744 ENUMX
5745   BFD_RELOC_NIOS2_LO16
5746 ENUMX
5747   BFD_RELOC_NIOS2_HIADJ16
5748 ENUMX
5749   BFD_RELOC_NIOS2_GPREL
5750 ENUMX
5751   BFD_RELOC_NIOS2_UJMP
5752 ENUMX
5753   BFD_RELOC_NIOS2_CJMP
5754 ENUMX
5755   BFD_RELOC_NIOS2_CALLR
5756 ENUMX
5757   BFD_RELOC_NIOS2_ALIGN
5758 ENUMX
5759   BFD_RELOC_NIOS2_GOT16
5760 ENUMX
5761   BFD_RELOC_NIOS2_CALL16
5762 ENUMX
5763   BFD_RELOC_NIOS2_GOTOFF_LO
5764 ENUMX
5765   BFD_RELOC_NIOS2_GOTOFF_HA
5766 ENUMX
5767   BFD_RELOC_NIOS2_PCREL_LO
5768 ENUMX
5769   BFD_RELOC_NIOS2_PCREL_HA
5770 ENUMX
5771   BFD_RELOC_NIOS2_TLS_GD16
5772 ENUMX
5773   BFD_RELOC_NIOS2_TLS_LDM16
5774 ENUMX
5775   BFD_RELOC_NIOS2_TLS_LDO16
5776 ENUMX
5777   BFD_RELOC_NIOS2_TLS_IE16
5778 ENUMX
5779   BFD_RELOC_NIOS2_TLS_LE16
5780 ENUMX
5781   BFD_RELOC_NIOS2_TLS_DTPMOD
5782 ENUMX
5783   BFD_RELOC_NIOS2_TLS_DTPREL
5784 ENUMX
5785   BFD_RELOC_NIOS2_TLS_TPREL
5786 ENUMX
5787   BFD_RELOC_NIOS2_COPY
5788 ENUMX
5789   BFD_RELOC_NIOS2_GLOB_DAT
5790 ENUMX
5791   BFD_RELOC_NIOS2_JUMP_SLOT
5792 ENUMX
5793   BFD_RELOC_NIOS2_RELATIVE
5794 ENUMX
5795   BFD_RELOC_NIOS2_GOTOFF
5796 ENUMDOC
5797   Relocations used by the Altera Nios II core.
5798
5799 ENUM
5800   BFD_RELOC_IQ2000_OFFSET_16
5801 ENUMX
5802   BFD_RELOC_IQ2000_OFFSET_21
5803 ENUMX
5804   BFD_RELOC_IQ2000_UHI16
5805 ENUMDOC
5806   IQ2000 Relocations.
5807
5808 ENUM
5809   BFD_RELOC_XTENSA_RTLD
5810 ENUMDOC
5811   Special Xtensa relocation used only by PLT entries in ELF shared
5812   objects to indicate that the runtime linker should set the value
5813   to one of its own internal functions or data structures.
5814 ENUM
5815   BFD_RELOC_XTENSA_GLOB_DAT
5816 ENUMX
5817   BFD_RELOC_XTENSA_JMP_SLOT
5818 ENUMX
5819   BFD_RELOC_XTENSA_RELATIVE
5820 ENUMDOC
5821   Xtensa relocations for ELF shared objects.
5822 ENUM
5823   BFD_RELOC_XTENSA_PLT
5824 ENUMDOC
5825   Xtensa relocation used in ELF object files for symbols that may require
5826   PLT entries.  Otherwise, this is just a generic 32-bit relocation.
5827 ENUM
5828   BFD_RELOC_XTENSA_DIFF8
5829 ENUMX
5830   BFD_RELOC_XTENSA_DIFF16
5831 ENUMX
5832   BFD_RELOC_XTENSA_DIFF32
5833 ENUMDOC
5834   Xtensa relocations to mark the difference of two local symbols.
5835   These are only needed to support linker relaxation and can be ignored
5836   when not relaxing.  The field is set to the value of the difference
5837   assuming no relaxation.  The relocation encodes the position of the
5838   first symbol so the linker can determine whether to adjust the field
5839   value.
5840 ENUM
5841   BFD_RELOC_XTENSA_SLOT0_OP
5842 ENUMX
5843   BFD_RELOC_XTENSA_SLOT1_OP
5844 ENUMX
5845   BFD_RELOC_XTENSA_SLOT2_OP
5846 ENUMX
5847   BFD_RELOC_XTENSA_SLOT3_OP
5848 ENUMX
5849   BFD_RELOC_XTENSA_SLOT4_OP
5850 ENUMX
5851   BFD_RELOC_XTENSA_SLOT5_OP
5852 ENUMX
5853   BFD_RELOC_XTENSA_SLOT6_OP
5854 ENUMX
5855   BFD_RELOC_XTENSA_SLOT7_OP
5856 ENUMX
5857   BFD_RELOC_XTENSA_SLOT8_OP
5858 ENUMX
5859   BFD_RELOC_XTENSA_SLOT9_OP
5860 ENUMX
5861   BFD_RELOC_XTENSA_SLOT10_OP
5862 ENUMX
5863   BFD_RELOC_XTENSA_SLOT11_OP
5864 ENUMX
5865   BFD_RELOC_XTENSA_SLOT12_OP
5866 ENUMX
5867   BFD_RELOC_XTENSA_SLOT13_OP
5868 ENUMX
5869   BFD_RELOC_XTENSA_SLOT14_OP
5870 ENUMDOC
5871   Generic Xtensa relocations for instruction operands.  Only the slot
5872   number is encoded in the relocation.  The relocation applies to the
5873   last PC-relative immediate operand, or if there are no PC-relative
5874   immediates, to the last immediate operand.
5875 ENUM
5876   BFD_RELOC_XTENSA_SLOT0_ALT
5877 ENUMX
5878   BFD_RELOC_XTENSA_SLOT1_ALT
5879 ENUMX
5880   BFD_RELOC_XTENSA_SLOT2_ALT
5881 ENUMX
5882   BFD_RELOC_XTENSA_SLOT3_ALT
5883 ENUMX
5884   BFD_RELOC_XTENSA_SLOT4_ALT
5885 ENUMX
5886   BFD_RELOC_XTENSA_SLOT5_ALT
5887 ENUMX
5888   BFD_RELOC_XTENSA_SLOT6_ALT
5889 ENUMX
5890   BFD_RELOC_XTENSA_SLOT7_ALT
5891 ENUMX
5892   BFD_RELOC_XTENSA_SLOT8_ALT
5893 ENUMX
5894   BFD_RELOC_XTENSA_SLOT9_ALT
5895 ENUMX
5896   BFD_RELOC_XTENSA_SLOT10_ALT
5897 ENUMX
5898   BFD_RELOC_XTENSA_SLOT11_ALT
5899 ENUMX
5900   BFD_RELOC_XTENSA_SLOT12_ALT
5901 ENUMX
5902   BFD_RELOC_XTENSA_SLOT13_ALT
5903 ENUMX
5904   BFD_RELOC_XTENSA_SLOT14_ALT
5905 ENUMDOC
5906   Alternate Xtensa relocations.  Only the slot is encoded in the
5907   relocation.  The meaning of these relocations is opcode-specific.
5908 ENUM
5909   BFD_RELOC_XTENSA_OP0
5910 ENUMX
5911   BFD_RELOC_XTENSA_OP1
5912 ENUMX
5913   BFD_RELOC_XTENSA_OP2
5914 ENUMDOC
5915   Xtensa relocations for backward compatibility.  These have all been
5916   replaced by BFD_RELOC_XTENSA_SLOT0_OP.
5917 ENUM
5918   BFD_RELOC_XTENSA_ASM_EXPAND
5919 ENUMDOC
5920   Xtensa relocation to mark that the assembler expanded the
5921   instructions from an original target.  The expansion size is
5922   encoded in the reloc size.
5923 ENUM
5924   BFD_RELOC_XTENSA_ASM_SIMPLIFY
5925 ENUMDOC
5926   Xtensa relocation to mark that the linker should simplify
5927   assembler-expanded instructions.  This is commonly used
5928   internally by the linker after analysis of a
5929   BFD_RELOC_XTENSA_ASM_EXPAND.
5930 ENUM
5931   BFD_RELOC_XTENSA_TLSDESC_FN
5932 ENUMX
5933   BFD_RELOC_XTENSA_TLSDESC_ARG
5934 ENUMX
5935   BFD_RELOC_XTENSA_TLS_DTPOFF
5936 ENUMX
5937   BFD_RELOC_XTENSA_TLS_TPOFF
5938 ENUMX
5939   BFD_RELOC_XTENSA_TLS_FUNC
5940 ENUMX
5941   BFD_RELOC_XTENSA_TLS_ARG
5942 ENUMX
5943   BFD_RELOC_XTENSA_TLS_CALL
5944 ENUMDOC
5945   Xtensa TLS relocations.
5946
5947 ENUM
5948   BFD_RELOC_Z80_DISP8
5949 ENUMDOC
5950   8 bit signed offset in (ix+d) or (iy+d).
5951
5952 ENUM
5953   BFD_RELOC_Z8K_DISP7
5954 ENUMDOC
5955   DJNZ offset.
5956 ENUM
5957   BFD_RELOC_Z8K_CALLR
5958 ENUMDOC
5959   CALR offset.
5960 ENUM
5961   BFD_RELOC_Z8K_IMM4L
5962 ENUMDOC
5963   4 bit value.
5964
5965 ENUM
5966    BFD_RELOC_LM32_CALL
5967 ENUMX
5968    BFD_RELOC_LM32_BRANCH
5969 ENUMX
5970    BFD_RELOC_LM32_16_GOT
5971 ENUMX
5972    BFD_RELOC_LM32_GOTOFF_HI16
5973 ENUMX
5974    BFD_RELOC_LM32_GOTOFF_LO16
5975 ENUMX
5976    BFD_RELOC_LM32_COPY
5977 ENUMX
5978    BFD_RELOC_LM32_GLOB_DAT
5979 ENUMX
5980    BFD_RELOC_LM32_JMP_SLOT
5981 ENUMX
5982    BFD_RELOC_LM32_RELATIVE
5983 ENUMDOC
5984  Lattice Mico32 relocations.
5985
5986 ENUM
5987   BFD_RELOC_MACH_O_SECTDIFF
5988 ENUMDOC
5989   Difference between two section addreses.  Must be followed by a
5990   BFD_RELOC_MACH_O_PAIR.
5991 ENUM
5992   BFD_RELOC_MACH_O_LOCAL_SECTDIFF
5993 ENUMDOC
5994   Like BFD_RELOC_MACH_O_SECTDIFF but with a local symbol.
5995 ENUM
5996   BFD_RELOC_MACH_O_PAIR
5997 ENUMDOC
5998   Pair of relocation.  Contains the first symbol.
5999
6000 ENUM
6001   BFD_RELOC_MACH_O_X86_64_BRANCH32
6002 ENUMX
6003   BFD_RELOC_MACH_O_X86_64_BRANCH8
6004 ENUMDOC
6005   PCREL relocations.  They are marked as branch to create PLT entry if
6006   required.
6007 ENUM
6008   BFD_RELOC_MACH_O_X86_64_GOT
6009 ENUMDOC
6010   Used when referencing a GOT entry.
6011 ENUM
6012   BFD_RELOC_MACH_O_X86_64_GOT_LOAD
6013 ENUMDOC
6014   Used when loading a GOT entry with movq.  It is specially marked so that
6015   the linker could optimize the movq to a leaq if possible.
6016 ENUM
6017   BFD_RELOC_MACH_O_X86_64_SUBTRACTOR32
6018 ENUMDOC
6019   Symbol will be substracted.  Must be followed by a BFD_RELOC_64.
6020 ENUM
6021   BFD_RELOC_MACH_O_X86_64_SUBTRACTOR64
6022 ENUMDOC
6023   Symbol will be substracted.  Must be followed by a BFD_RELOC_64.
6024 ENUM
6025   BFD_RELOC_MACH_O_X86_64_PCREL32_1
6026 ENUMDOC
6027   Same as BFD_RELOC_32_PCREL but with an implicit -1 addend.
6028 ENUM
6029   BFD_RELOC_MACH_O_X86_64_PCREL32_2
6030 ENUMDOC
6031   Same as BFD_RELOC_32_PCREL but with an implicit -2 addend.
6032 ENUM
6033   BFD_RELOC_MACH_O_X86_64_PCREL32_4
6034 ENUMDOC
6035   Same as BFD_RELOC_32_PCREL but with an implicit -4 addend.
6036
6037 ENUM
6038   BFD_RELOC_MICROBLAZE_32_LO
6039 ENUMDOC
6040   This is a 32 bit reloc for the microblaze that stores the
6041   low 16 bits of a value
6042 ENUM
6043   BFD_RELOC_MICROBLAZE_32_LO_PCREL
6044 ENUMDOC
6045   This is a 32 bit pc-relative reloc for the microblaze that
6046   stores the low 16 bits of a value
6047 ENUM
6048   BFD_RELOC_MICROBLAZE_32_ROSDA
6049 ENUMDOC
6050   This is a 32 bit reloc for the microblaze that stores a
6051   value relative to the read-only small data area anchor
6052 ENUM
6053   BFD_RELOC_MICROBLAZE_32_RWSDA
6054 ENUMDOC
6055   This is a 32 bit reloc for the microblaze that stores a
6056   value relative to the read-write small data area anchor
6057 ENUM
6058   BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM
6059 ENUMDOC
6060   This is a 32 bit reloc for the microblaze to handle
6061   expressions of the form "Symbol Op Symbol"
6062 ENUM
6063   BFD_RELOC_MICROBLAZE_64_NONE
6064 ENUMDOC
6065   This is a 64 bit reloc that stores the 32 bit pc relative
6066   value in two words (with an imm instruction).  No relocation is
6067   done here - only used for relaxing
6068 ENUM
6069   BFD_RELOC_MICROBLAZE_64_GOTPC
6070 ENUMDOC
6071   This is a 64 bit reloc that stores the 32 bit pc relative
6072   value in two words (with an imm instruction).  The relocation is
6073   PC-relative GOT offset
6074 ENUM
6075   BFD_RELOC_MICROBLAZE_64_GOT
6076 ENUMDOC
6077   This is a 64 bit reloc that stores the 32 bit pc relative
6078   value in two words (with an imm instruction).  The relocation is
6079   GOT offset
6080 ENUM
6081   BFD_RELOC_MICROBLAZE_64_PLT
6082 ENUMDOC
6083   This is a 64 bit reloc that stores the 32 bit pc relative
6084   value in two words (with an imm instruction).  The relocation is
6085   PC-relative offset into PLT
6086 ENUM
6087   BFD_RELOC_MICROBLAZE_64_GOTOFF
6088 ENUMDOC
6089   This is a 64 bit reloc that stores the 32 bit GOT relative
6090   value in two words (with an imm instruction).  The relocation is
6091   relative offset from _GLOBAL_OFFSET_TABLE_
6092 ENUM
6093   BFD_RELOC_MICROBLAZE_32_GOTOFF
6094 ENUMDOC
6095   This is a 32 bit reloc that stores the 32 bit GOT relative
6096   value in a word.  The relocation is relative offset from
6097   _GLOBAL_OFFSET_TABLE_
6098 ENUM
6099   BFD_RELOC_MICROBLAZE_COPY
6100 ENUMDOC
6101   This is used to tell the dynamic linker to copy the value out of
6102   the dynamic object into the runtime process image.
6103 ENUM
6104   BFD_RELOC_MICROBLAZE_64_TLS
6105 ENUMDOC
6106   Unused Reloc
6107 ENUM
6108   BFD_RELOC_MICROBLAZE_64_TLSGD
6109 ENUMDOC
6110   This is a 64 bit reloc that stores the 32 bit GOT relative value
6111   of the GOT TLS GD info entry in two words (with an imm instruction). The
6112   relocation is GOT offset.
6113 ENUM
6114   BFD_RELOC_MICROBLAZE_64_TLSLD
6115 ENUMDOC
6116   This is a 64 bit reloc that stores the 32 bit GOT relative value
6117   of the GOT TLS LD info entry in two words (with an imm instruction). The
6118   relocation is GOT offset.
6119 ENUM
6120   BFD_RELOC_MICROBLAZE_32_TLSDTPMOD
6121 ENUMDOC
6122   This is a 32 bit reloc that stores the Module ID to GOT(n).
6123 ENUM
6124   BFD_RELOC_MICROBLAZE_32_TLSDTPREL
6125 ENUMDOC
6126   This is a 32 bit reloc that stores TLS offset to GOT(n+1).
6127 ENUM
6128   BFD_RELOC_MICROBLAZE_64_TLSDTPREL
6129 ENUMDOC
6130   This is a 32 bit reloc for storing TLS offset to two words (uses imm
6131   instruction)
6132 ENUM
6133   BFD_RELOC_MICROBLAZE_64_TLSGOTTPREL
6134 ENUMDOC
6135   This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6136   to two words (uses imm instruction).
6137 ENUM
6138   BFD_RELOC_MICROBLAZE_64_TLSTPREL
6139 ENUMDOC
6140   This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6141   to two words (uses imm instruction).
6142
6143 ENUM
6144   BFD_RELOC_AARCH64_RELOC_START
6145 ENUMDOC
6146   AArch64 pseudo relocation code to mark the start of the AArch64
6147   relocation enumerators.  N.B. the order of the enumerators is
6148   important as several tables in the AArch64 bfd backend are indexed
6149   by these enumerators; make sure they are all synced.
6150 ENUM
6151   BFD_RELOC_AARCH64_NONE
6152 ENUMDOC
6153   AArch64 null relocation code.
6154 ENUM
6155   BFD_RELOC_AARCH64_64
6156 ENUMX
6157   BFD_RELOC_AARCH64_32
6158 ENUMX
6159   BFD_RELOC_AARCH64_16
6160 ENUMDOC
6161   Basic absolute relocations of N bits.  These are equivalent to
6162 BFD_RELOC_N and they were added to assist the indexing of the howto
6163 table.
6164 ENUM
6165   BFD_RELOC_AARCH64_64_PCREL
6166 ENUMX
6167   BFD_RELOC_AARCH64_32_PCREL
6168 ENUMX
6169   BFD_RELOC_AARCH64_16_PCREL
6170 ENUMDOC
6171   PC-relative relocations.  These are equivalent to BFD_RELOC_N_PCREL
6172 and they were added to assist the indexing of the howto table.
6173 ENUM
6174   BFD_RELOC_AARCH64_MOVW_G0
6175 ENUMDOC
6176   AArch64 MOV[NZK] instruction with most significant bits 0 to 15
6177   of an unsigned address/value.
6178 ENUM
6179   BFD_RELOC_AARCH64_MOVW_G0_NC
6180 ENUMDOC
6181   AArch64 MOV[NZK] instruction with less significant bits 0 to 15 of
6182   an address/value.  No overflow checking.
6183 ENUM
6184   BFD_RELOC_AARCH64_MOVW_G1
6185 ENUMDOC
6186   AArch64 MOV[NZK] instruction with most significant bits 16 to 31
6187   of an unsigned address/value.
6188 ENUM
6189   BFD_RELOC_AARCH64_MOVW_G1_NC
6190 ENUMDOC
6191   AArch64 MOV[NZK] instruction with less significant bits 16 to 31
6192   of an address/value.  No overflow checking.
6193 ENUM
6194   BFD_RELOC_AARCH64_MOVW_G2
6195 ENUMDOC
6196   AArch64 MOV[NZK] instruction with most significant bits 32 to 47
6197   of an unsigned address/value.
6198 ENUM
6199   BFD_RELOC_AARCH64_MOVW_G2_NC
6200 ENUMDOC
6201   AArch64 MOV[NZK] instruction with less significant bits 32 to 47
6202   of an address/value.  No overflow checking.
6203 ENUM
6204   BFD_RELOC_AARCH64_MOVW_G3
6205 ENUMDOC
6206   AArch64 MOV[NZK] instruction with most signficant bits 48 to 64
6207   of a signed or unsigned address/value.
6208 ENUM
6209   BFD_RELOC_AARCH64_MOVW_G0_S
6210 ENUMDOC
6211   AArch64 MOV[NZ] instruction with most significant bits 0 to 15
6212   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6213   value's sign.
6214 ENUM
6215   BFD_RELOC_AARCH64_MOVW_G1_S
6216 ENUMDOC
6217   AArch64 MOV[NZ] instruction with most significant bits 16 to 31
6218   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6219   value's sign.
6220 ENUM
6221   BFD_RELOC_AARCH64_MOVW_G2_S
6222 ENUMDOC
6223   AArch64 MOV[NZ] instruction with most significant bits 32 to 47
6224   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
6225   value's sign.
6226 ENUM
6227   BFD_RELOC_AARCH64_LD_LO19_PCREL
6228 ENUMDOC
6229   AArch64 Load Literal instruction, holding a 19 bit pc-relative word
6230   offset.  The lowest two bits must be zero and are not stored in the
6231   instruction, giving a 21 bit signed byte offset.
6232 ENUM
6233   BFD_RELOC_AARCH64_ADR_LO21_PCREL
6234 ENUMDOC
6235   AArch64 ADR instruction, holding a simple 21 bit pc-relative byte offset.
6236 ENUM
6237   BFD_RELOC_AARCH64_ADR_HI21_PCREL
6238 ENUMDOC
6239   AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
6240   offset, giving a 4KB aligned page base address.
6241 ENUM
6242   BFD_RELOC_AARCH64_ADR_HI21_NC_PCREL
6243 ENUMDOC
6244   AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
6245   offset, giving a 4KB aligned page base address, but with no overflow
6246   checking.
6247 ENUM
6248   BFD_RELOC_AARCH64_ADD_LO12
6249 ENUMDOC
6250   AArch64 ADD immediate instruction, holding bits 0 to 11 of the address.
6251   Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6252 ENUM
6253   BFD_RELOC_AARCH64_LDST8_LO12
6254 ENUMDOC
6255   AArch64 8-bit load/store instruction, holding bits 0 to 11 of the
6256   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6257 ENUM
6258   BFD_RELOC_AARCH64_TSTBR14
6259 ENUMDOC
6260   AArch64 14 bit pc-relative test bit and branch.
6261   The lowest two bits must be zero and are not stored in the instruction,
6262   giving a 16 bit signed byte offset.
6263 ENUM
6264   BFD_RELOC_AARCH64_BRANCH19
6265 ENUMDOC
6266   AArch64 19 bit pc-relative conditional branch and compare & branch.
6267   The lowest two bits must be zero and are not stored in the instruction,
6268   giving a 21 bit signed byte offset.
6269 ENUM
6270   BFD_RELOC_AARCH64_JUMP26
6271 ENUMDOC
6272   AArch64 26 bit pc-relative unconditional branch.
6273   The lowest two bits must be zero and are not stored in the instruction,
6274   giving a 28 bit signed byte offset.
6275 ENUM
6276   BFD_RELOC_AARCH64_CALL26
6277 ENUMDOC
6278   AArch64 26 bit pc-relative unconditional branch and link.
6279   The lowest two bits must be zero and are not stored in the instruction,
6280   giving a 28 bit signed byte offset.
6281 ENUM
6282   BFD_RELOC_AARCH64_LDST16_LO12
6283 ENUMDOC
6284   AArch64 16-bit load/store instruction, holding bits 0 to 11 of the
6285   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6286 ENUM
6287   BFD_RELOC_AARCH64_LDST32_LO12
6288 ENUMDOC
6289   AArch64 32-bit load/store instruction, holding bits 0 to 11 of the
6290   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6291 ENUM
6292   BFD_RELOC_AARCH64_LDST64_LO12
6293 ENUMDOC
6294   AArch64 64-bit load/store instruction, holding bits 0 to 11 of the
6295   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6296 ENUM
6297   BFD_RELOC_AARCH64_LDST128_LO12
6298 ENUMDOC
6299   AArch64 128-bit load/store instruction, holding bits 0 to 11 of the
6300   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6301 ENUM
6302   BFD_RELOC_AARCH64_GOT_LD_PREL19
6303 ENUMDOC
6304   AArch64 Load Literal instruction, holding a 19 bit PC relative word
6305   offset of the global offset table entry for a symbol.  The lowest two
6306   bits must be zero and are not stored in the instruction, giving a 21
6307   bit signed byte offset.  This relocation type requires signed overflow
6308   checking.
6309 ENUM
6310   BFD_RELOC_AARCH64_ADR_GOT_PAGE
6311 ENUMDOC
6312   Get to the page base of the global offset table entry for a symbol as
6313   part of an ADRP instruction using a 21 bit PC relative value.Used in
6314   conjunction with BFD_RELOC_AARCH64_LD64_GOT_LO12_NC.
6315 ENUM
6316   BFD_RELOC_AARCH64_LD64_GOT_LO12_NC
6317 ENUMDOC
6318   Unsigned 12 bit byte offset for 64 bit load/store from the page of
6319   the GOT entry for this symbol.  Used in conjunction with
6320   BFD_RELOC_AARCH64_ADR_GOTPAGE.  Valid in LP64 ABI only.
6321 ENUM
6322   BFD_RELOC_AARCH64_LD32_GOT_LO12_NC
6323 ENUMDOC
6324   Unsigned 12 bit byte offset for 32 bit load/store from the page of
6325   the GOT entry for this symbol.  Used in conjunction with
6326   BFD_RELOC_AARCH64_ADR_GOTPAGE.  Valid in ILP32 ABI only.
6327 ENUM
6328   BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21
6329 ENUMDOC
6330   Get to the page base of the global offset table entry for a symbols
6331   tls_index structure as part of an adrp instruction using a 21 bit PC
6332   relative value.  Used in conjunction with
6333   BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC.
6334 ENUM
6335   BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC
6336 ENUMDOC
6337   Unsigned 12 bit byte offset to global offset table entry for a symbols
6338   tls_index structure.  Used in conjunction with
6339   BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21.
6340 ENUM
6341   BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G1
6342 ENUMDOC
6343   AArch64 TLS INITIAL EXEC relocation.
6344 ENUM
6345   BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G0_NC
6346 ENUMDOC
6347   AArch64 TLS INITIAL EXEC relocation.
6348 ENUM
6349   BFD_RELOC_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21
6350 ENUMDOC
6351   AArch64 TLS INITIAL EXEC relocation.
6352 ENUM
6353   BFD_RELOC_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC
6354 ENUMDOC
6355   AArch64 TLS INITIAL EXEC relocation.
6356 ENUM
6357   BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC
6358 ENUMDOC
6359   AArch64 TLS INITIAL EXEC relocation.
6360 ENUM
6361   BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19
6362 ENUMDOC
6363   AArch64 TLS INITIAL EXEC relocation.
6364 ENUM
6365   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G2
6366 ENUMDOC
6367   AArch64 TLS LOCAL EXEC relocation.
6368 ENUM
6369   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1
6370 ENUMDOC
6371   AArch64 TLS LOCAL EXEC relocation.
6372 ENUM
6373   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1_NC
6374 ENUMDOC
6375   AArch64 TLS LOCAL EXEC relocation.
6376 ENUM
6377   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0
6378 ENUMDOC
6379   AArch64 TLS LOCAL EXEC relocation.
6380 ENUM
6381   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0_NC
6382 ENUMDOC
6383   AArch64 TLS LOCAL EXEC relocation.
6384 ENUM
6385   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_HI12
6386 ENUMDOC
6387   AArch64 TLS LOCAL EXEC relocation.
6388 ENUM
6389   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12
6390 ENUMDOC
6391   AArch64 TLS LOCAL EXEC relocation.
6392 ENUM
6393   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12_NC
6394 ENUMDOC
6395   AArch64 TLS LOCAL EXEC relocation.
6396 ENUM
6397   BFD_RELOC_AARCH64_TLSDESC_LD_PREL19
6398 ENUMDOC
6399   AArch64 TLS DESC relocation.
6400 ENUM
6401   BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21
6402 ENUMDOC
6403   AArch64 TLS DESC relocation.
6404 ENUM
6405   BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21
6406 ENUMDOC
6407   AArch64 TLS DESC relocation.
6408 ENUM
6409   BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC
6410 ENUMDOC
6411   AArch64 TLS DESC relocation.
6412 ENUM
6413   BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC
6414 ENUMDOC
6415   AArch64 TLS DESC relocation.
6416 ENUM
6417   BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC
6418 ENUMDOC
6419   AArch64 TLS DESC relocation.
6420 ENUM
6421   BFD_RELOC_AARCH64_TLSDESC_OFF_G1
6422 ENUMDOC
6423   AArch64 TLS DESC relocation.
6424 ENUM
6425   BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC
6426 ENUMDOC
6427   AArch64 TLS DESC relocation.
6428 ENUM
6429   BFD_RELOC_AARCH64_TLSDESC_LDR
6430 ENUMDOC
6431   AArch64 TLS DESC relocation.
6432 ENUM
6433   BFD_RELOC_AARCH64_TLSDESC_ADD
6434 ENUMDOC
6435   AArch64 TLS DESC relocation.
6436 ENUM
6437   BFD_RELOC_AARCH64_TLSDESC_CALL
6438 ENUMDOC
6439   AArch64 TLS DESC relocation.
6440 ENUM
6441   BFD_RELOC_AARCH64_COPY
6442 ENUMDOC
6443   AArch64 TLS relocation.
6444 ENUM
6445   BFD_RELOC_AARCH64_GLOB_DAT
6446 ENUMDOC
6447   AArch64 TLS relocation.
6448 ENUM
6449   BFD_RELOC_AARCH64_JUMP_SLOT
6450 ENUMDOC
6451   AArch64 TLS relocation.
6452 ENUM
6453   BFD_RELOC_AARCH64_RELATIVE
6454 ENUMDOC
6455   AArch64 TLS relocation.
6456 ENUM
6457   BFD_RELOC_AARCH64_TLS_DTPMOD
6458 ENUMDOC
6459   AArch64 TLS relocation.
6460 ENUM
6461   BFD_RELOC_AARCH64_TLS_DTPREL
6462 ENUMDOC
6463   AArch64 TLS relocation.
6464 ENUM
6465   BFD_RELOC_AARCH64_TLS_TPREL
6466 ENUMDOC
6467   AArch64 TLS relocation.
6468 ENUM
6469   BFD_RELOC_AARCH64_TLSDESC
6470 ENUMDOC
6471   AArch64 TLS relocation.
6472 ENUM
6473   BFD_RELOC_AARCH64_IRELATIVE
6474 ENUMDOC
6475   AArch64 support for STT_GNU_IFUNC.
6476 ENUM
6477   BFD_RELOC_AARCH64_RELOC_END
6478 ENUMDOC
6479   AArch64 pseudo relocation code to mark the end of the AArch64
6480   relocation enumerators that have direct mapping to ELF reloc codes.
6481   There are a few more enumerators after this one; those are mainly
6482   used by the AArch64 assembler for the internal fixup or to select
6483   one of the above enumerators.
6484 ENUM
6485   BFD_RELOC_AARCH64_GAS_INTERNAL_FIXUP
6486 ENUMDOC
6487   AArch64 pseudo relocation code to be used internally by the AArch64
6488   assembler and not (currently) written to any object files.
6489 ENUM
6490   BFD_RELOC_AARCH64_LDST_LO12
6491 ENUMDOC
6492   AArch64 unspecified load/store instruction, holding bits 0 to 11 of the
6493   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6494 ENUM
6495   BFD_RELOC_AARCH64_LD_GOT_LO12_NC
6496 ENUMDOC
6497   AArch64 pseudo relocation code to be used internally by the AArch64
6498   assembler and not (currently) written to any object files.
6499 ENUM
6500   BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC
6501 ENUMDOC
6502   AArch64 pseudo relocation code to be used internally by the AArch64
6503   assembler and not (currently) written to any object files.
6504 ENUM
6505   BFD_RELOC_AARCH64_TLSDESC_LD_LO12_NC
6506 ENUMDOC
6507   AArch64 pseudo relocation code to be used internally by the AArch64
6508   assembler and not (currently) written to any object files.
6509
6510 ENUM
6511   BFD_RELOC_TILEPRO_COPY
6512 ENUMX
6513   BFD_RELOC_TILEPRO_GLOB_DAT
6514 ENUMX
6515   BFD_RELOC_TILEPRO_JMP_SLOT
6516 ENUMX
6517   BFD_RELOC_TILEPRO_RELATIVE
6518 ENUMX
6519   BFD_RELOC_TILEPRO_BROFF_X1
6520 ENUMX
6521   BFD_RELOC_TILEPRO_JOFFLONG_X1
6522 ENUMX
6523   BFD_RELOC_TILEPRO_JOFFLONG_X1_PLT
6524 ENUMX
6525   BFD_RELOC_TILEPRO_IMM8_X0
6526 ENUMX
6527   BFD_RELOC_TILEPRO_IMM8_Y0
6528 ENUMX
6529   BFD_RELOC_TILEPRO_IMM8_X1
6530 ENUMX
6531   BFD_RELOC_TILEPRO_IMM8_Y1
6532 ENUMX
6533   BFD_RELOC_TILEPRO_DEST_IMM8_X1
6534 ENUMX
6535   BFD_RELOC_TILEPRO_MT_IMM15_X1
6536 ENUMX
6537   BFD_RELOC_TILEPRO_MF_IMM15_X1
6538 ENUMX
6539   BFD_RELOC_TILEPRO_IMM16_X0
6540 ENUMX
6541   BFD_RELOC_TILEPRO_IMM16_X1
6542 ENUMX
6543   BFD_RELOC_TILEPRO_IMM16_X0_LO
6544 ENUMX
6545   BFD_RELOC_TILEPRO_IMM16_X1_LO
6546 ENUMX
6547   BFD_RELOC_TILEPRO_IMM16_X0_HI
6548 ENUMX
6549   BFD_RELOC_TILEPRO_IMM16_X1_HI
6550 ENUMX
6551   BFD_RELOC_TILEPRO_IMM16_X0_HA
6552 ENUMX
6553   BFD_RELOC_TILEPRO_IMM16_X1_HA
6554 ENUMX
6555   BFD_RELOC_TILEPRO_IMM16_X0_PCREL
6556 ENUMX
6557   BFD_RELOC_TILEPRO_IMM16_X1_PCREL
6558 ENUMX
6559   BFD_RELOC_TILEPRO_IMM16_X0_LO_PCREL
6560 ENUMX
6561   BFD_RELOC_TILEPRO_IMM16_X1_LO_PCREL
6562 ENUMX
6563   BFD_RELOC_TILEPRO_IMM16_X0_HI_PCREL
6564 ENUMX
6565   BFD_RELOC_TILEPRO_IMM16_X1_HI_PCREL
6566 ENUMX
6567   BFD_RELOC_TILEPRO_IMM16_X0_HA_PCREL
6568 ENUMX
6569   BFD_RELOC_TILEPRO_IMM16_X1_HA_PCREL
6570 ENUMX
6571   BFD_RELOC_TILEPRO_IMM16_X0_GOT
6572 ENUMX
6573   BFD_RELOC_TILEPRO_IMM16_X1_GOT
6574 ENUMX
6575   BFD_RELOC_TILEPRO_IMM16_X0_GOT_LO
6576 ENUMX
6577   BFD_RELOC_TILEPRO_IMM16_X1_GOT_LO
6578 ENUMX
6579   BFD_RELOC_TILEPRO_IMM16_X0_GOT_HI
6580 ENUMX
6581   BFD_RELOC_TILEPRO_IMM16_X1_GOT_HI
6582 ENUMX
6583   BFD_RELOC_TILEPRO_IMM16_X0_GOT_HA
6584 ENUMX
6585   BFD_RELOC_TILEPRO_IMM16_X1_GOT_HA
6586 ENUMX
6587   BFD_RELOC_TILEPRO_MMSTART_X0
6588 ENUMX
6589   BFD_RELOC_TILEPRO_MMEND_X0
6590 ENUMX
6591   BFD_RELOC_TILEPRO_MMSTART_X1
6592 ENUMX
6593   BFD_RELOC_TILEPRO_MMEND_X1
6594 ENUMX
6595   BFD_RELOC_TILEPRO_SHAMT_X0
6596 ENUMX
6597   BFD_RELOC_TILEPRO_SHAMT_X1
6598 ENUMX
6599   BFD_RELOC_TILEPRO_SHAMT_Y0
6600 ENUMX
6601   BFD_RELOC_TILEPRO_SHAMT_Y1
6602 ENUMX
6603   BFD_RELOC_TILEPRO_TLS_GD_CALL
6604 ENUMX
6605   BFD_RELOC_TILEPRO_IMM8_X0_TLS_GD_ADD
6606 ENUMX
6607   BFD_RELOC_TILEPRO_IMM8_X1_TLS_GD_ADD
6608 ENUMX
6609   BFD_RELOC_TILEPRO_IMM8_Y0_TLS_GD_ADD
6610 ENUMX
6611   BFD_RELOC_TILEPRO_IMM8_Y1_TLS_GD_ADD
6612 ENUMX
6613   BFD_RELOC_TILEPRO_TLS_IE_LOAD
6614 ENUMX
6615   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD
6616 ENUMX
6617   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD
6618 ENUMX
6619   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_LO
6620 ENUMX
6621   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_LO
6622 ENUMX
6623   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HI
6624 ENUMX
6625   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HI
6626 ENUMX
6627   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HA
6628 ENUMX
6629   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HA
6630 ENUMX
6631   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE
6632 ENUMX
6633   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE
6634 ENUMX
6635   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_LO
6636 ENUMX
6637   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_LO
6638 ENUMX
6639   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HI
6640 ENUMX
6641   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HI
6642 ENUMX
6643   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HA
6644 ENUMX
6645   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HA
6646 ENUMX
6647   BFD_RELOC_TILEPRO_TLS_DTPMOD32
6648 ENUMX
6649   BFD_RELOC_TILEPRO_TLS_DTPOFF32
6650 ENUMX
6651   BFD_RELOC_TILEPRO_TLS_TPOFF32
6652 ENUMX
6653   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE
6654 ENUMX
6655   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE
6656 ENUMX
6657   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_LO
6658 ENUMX
6659   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_LO
6660 ENUMX
6661   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HI
6662 ENUMX
6663   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HI
6664 ENUMX
6665   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HA
6666 ENUMX
6667   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HA
6668 ENUMDOC
6669   Tilera TILEPro Relocations.
6670 ENUM
6671   BFD_RELOC_TILEGX_HW0
6672 ENUMX
6673   BFD_RELOC_TILEGX_HW1
6674 ENUMX
6675   BFD_RELOC_TILEGX_HW2
6676 ENUMX
6677   BFD_RELOC_TILEGX_HW3
6678 ENUMX
6679   BFD_RELOC_TILEGX_HW0_LAST
6680 ENUMX
6681   BFD_RELOC_TILEGX_HW1_LAST
6682 ENUMX
6683   BFD_RELOC_TILEGX_HW2_LAST
6684 ENUMX
6685   BFD_RELOC_TILEGX_COPY
6686 ENUMX
6687   BFD_RELOC_TILEGX_GLOB_DAT
6688 ENUMX
6689   BFD_RELOC_TILEGX_JMP_SLOT
6690 ENUMX
6691   BFD_RELOC_TILEGX_RELATIVE
6692 ENUMX
6693   BFD_RELOC_TILEGX_BROFF_X1
6694 ENUMX
6695   BFD_RELOC_TILEGX_JUMPOFF_X1
6696 ENUMX
6697   BFD_RELOC_TILEGX_JUMPOFF_X1_PLT
6698 ENUMX
6699   BFD_RELOC_TILEGX_IMM8_X0
6700 ENUMX
6701   BFD_RELOC_TILEGX_IMM8_Y0
6702 ENUMX
6703   BFD_RELOC_TILEGX_IMM8_X1
6704 ENUMX
6705   BFD_RELOC_TILEGX_IMM8_Y1
6706 ENUMX
6707   BFD_RELOC_TILEGX_DEST_IMM8_X1
6708 ENUMX
6709   BFD_RELOC_TILEGX_MT_IMM14_X1
6710 ENUMX
6711   BFD_RELOC_TILEGX_MF_IMM14_X1
6712 ENUMX
6713   BFD_RELOC_TILEGX_MMSTART_X0
6714 ENUMX
6715   BFD_RELOC_TILEGX_MMEND_X0
6716 ENUMX
6717   BFD_RELOC_TILEGX_SHAMT_X0
6718 ENUMX
6719   BFD_RELOC_TILEGX_SHAMT_X1
6720 ENUMX
6721   BFD_RELOC_TILEGX_SHAMT_Y0
6722 ENUMX
6723   BFD_RELOC_TILEGX_SHAMT_Y1
6724 ENUMX
6725   BFD_RELOC_TILEGX_IMM16_X0_HW0
6726 ENUMX
6727   BFD_RELOC_TILEGX_IMM16_X1_HW0
6728 ENUMX
6729   BFD_RELOC_TILEGX_IMM16_X0_HW1
6730 ENUMX
6731   BFD_RELOC_TILEGX_IMM16_X1_HW1
6732 ENUMX
6733   BFD_RELOC_TILEGX_IMM16_X0_HW2
6734 ENUMX
6735   BFD_RELOC_TILEGX_IMM16_X1_HW2
6736 ENUMX
6737   BFD_RELOC_TILEGX_IMM16_X0_HW3
6738 ENUMX
6739   BFD_RELOC_TILEGX_IMM16_X1_HW3
6740 ENUMX
6741   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST
6742 ENUMX
6743   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST
6744 ENUMX
6745   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST
6746 ENUMX
6747   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST
6748 ENUMX
6749   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST
6750 ENUMX
6751   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST
6752 ENUMX
6753   BFD_RELOC_TILEGX_IMM16_X0_HW0_PCREL
6754 ENUMX
6755   BFD_RELOC_TILEGX_IMM16_X1_HW0_PCREL
6756 ENUMX
6757   BFD_RELOC_TILEGX_IMM16_X0_HW1_PCREL
6758 ENUMX
6759   BFD_RELOC_TILEGX_IMM16_X1_HW1_PCREL
6760 ENUMX
6761   BFD_RELOC_TILEGX_IMM16_X0_HW2_PCREL
6762 ENUMX
6763   BFD_RELOC_TILEGX_IMM16_X1_HW2_PCREL
6764 ENUMX
6765   BFD_RELOC_TILEGX_IMM16_X0_HW3_PCREL
6766 ENUMX
6767   BFD_RELOC_TILEGX_IMM16_X1_HW3_PCREL
6768 ENUMX
6769   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PCREL
6770 ENUMX
6771   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PCREL
6772 ENUMX
6773   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PCREL
6774 ENUMX
6775   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PCREL
6776 ENUMX
6777   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PCREL
6778 ENUMX
6779   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PCREL
6780 ENUMX
6781   BFD_RELOC_TILEGX_IMM16_X0_HW0_GOT
6782 ENUMX
6783   BFD_RELOC_TILEGX_IMM16_X1_HW0_GOT
6784 ENUMX
6785   BFD_RELOC_TILEGX_IMM16_X0_HW0_PLT_PCREL
6786 ENUMX
6787   BFD_RELOC_TILEGX_IMM16_X1_HW0_PLT_PCREL
6788 ENUMX
6789   BFD_RELOC_TILEGX_IMM16_X0_HW1_PLT_PCREL
6790 ENUMX
6791   BFD_RELOC_TILEGX_IMM16_X1_HW1_PLT_PCREL
6792 ENUMX
6793   BFD_RELOC_TILEGX_IMM16_X0_HW2_PLT_PCREL
6794 ENUMX
6795   BFD_RELOC_TILEGX_IMM16_X1_HW2_PLT_PCREL
6796 ENUMX
6797   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_GOT
6798 ENUMX
6799   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_GOT
6800 ENUMX
6801   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_GOT
6802 ENUMX
6803   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_GOT
6804 ENUMX
6805   BFD_RELOC_TILEGX_IMM16_X0_HW3_PLT_PCREL
6806 ENUMX
6807   BFD_RELOC_TILEGX_IMM16_X1_HW3_PLT_PCREL
6808 ENUMX
6809   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_GD
6810 ENUMX
6811   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_GD
6812 ENUMX
6813   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_LE
6814 ENUMX
6815   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_LE
6816 ENUMX
6817   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_LE
6818 ENUMX
6819   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_LE
6820 ENUMX
6821   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_LE
6822 ENUMX
6823   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_LE
6824 ENUMX
6825   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_GD
6826 ENUMX
6827   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_GD
6828 ENUMX
6829   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_GD
6830 ENUMX
6831   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_GD
6832 ENUMX
6833   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_IE
6834 ENUMX
6835   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_IE
6836 ENUMX
6837   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PLT_PCREL
6838 ENUMX
6839   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PLT_PCREL
6840 ENUMX
6841   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PLT_PCREL
6842 ENUMX
6843   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PLT_PCREL
6844 ENUMX
6845   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PLT_PCREL
6846 ENUMX
6847   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PLT_PCREL
6848 ENUMX
6849   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_IE
6850 ENUMX
6851   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_IE
6852 ENUMX
6853   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_IE
6854 ENUMX
6855   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_IE
6856 ENUMX
6857   BFD_RELOC_TILEGX_TLS_DTPMOD64
6858 ENUMX
6859   BFD_RELOC_TILEGX_TLS_DTPOFF64
6860 ENUMX
6861   BFD_RELOC_TILEGX_TLS_TPOFF64
6862 ENUMX
6863   BFD_RELOC_TILEGX_TLS_DTPMOD32
6864 ENUMX
6865   BFD_RELOC_TILEGX_TLS_DTPOFF32
6866 ENUMX
6867   BFD_RELOC_TILEGX_TLS_TPOFF32
6868 ENUMX
6869   BFD_RELOC_TILEGX_TLS_GD_CALL
6870 ENUMX
6871   BFD_RELOC_TILEGX_IMM8_X0_TLS_GD_ADD
6872 ENUMX
6873   BFD_RELOC_TILEGX_IMM8_X1_TLS_GD_ADD
6874 ENUMX
6875   BFD_RELOC_TILEGX_IMM8_Y0_TLS_GD_ADD
6876 ENUMX
6877   BFD_RELOC_TILEGX_IMM8_Y1_TLS_GD_ADD
6878 ENUMX
6879   BFD_RELOC_TILEGX_TLS_IE_LOAD
6880 ENUMX
6881   BFD_RELOC_TILEGX_IMM8_X0_TLS_ADD
6882 ENUMX
6883   BFD_RELOC_TILEGX_IMM8_X1_TLS_ADD
6884 ENUMX
6885   BFD_RELOC_TILEGX_IMM8_Y0_TLS_ADD
6886 ENUMX
6887   BFD_RELOC_TILEGX_IMM8_Y1_TLS_ADD
6888 ENUMDOC
6889   Tilera TILE-Gx Relocations.
6890 ENUM
6891   BFD_RELOC_EPIPHANY_SIMM8
6892 ENUMDOC
6893   Adapteva EPIPHANY - 8 bit signed pc-relative displacement
6894 ENUM
6895   BFD_RELOC_EPIPHANY_SIMM24
6896 ENUMDOC
6897   Adapteva EPIPHANY - 24 bit signed pc-relative displacement
6898 ENUM
6899   BFD_RELOC_EPIPHANY_HIGH
6900 ENUMDOC
6901   Adapteva EPIPHANY - 16 most-significant bits of absolute address
6902 ENUM
6903   BFD_RELOC_EPIPHANY_LOW
6904 ENUMDOC
6905   Adapteva EPIPHANY - 16 least-significant bits of absolute address
6906 ENUM
6907   BFD_RELOC_EPIPHANY_SIMM11
6908 ENUMDOC
6909   Adapteva EPIPHANY - 11 bit signed number - add/sub immediate
6910 ENUM
6911   BFD_RELOC_EPIPHANY_IMM11
6912 ENUMDOC
6913   Adapteva EPIPHANY - 11 bit sign-magnitude number (ld/st displacement)
6914 ENUM
6915   BFD_RELOC_EPIPHANY_IMM8
6916 ENUMDOC
6917   Adapteva EPIPHANY - 8 bit immediate for 16 bit mov instruction.
6918
6919
6920 ENDSENUM
6921   BFD_RELOC_UNUSED
6922 CODE_FRAGMENT
6923 .
6924 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
6925 */
6926
6927 /*
6928 FUNCTION
6929         bfd_reloc_type_lookup
6930         bfd_reloc_name_lookup
6931
6932 SYNOPSIS
6933         reloc_howto_type *bfd_reloc_type_lookup
6934           (bfd *abfd, bfd_reloc_code_real_type code);
6935         reloc_howto_type *bfd_reloc_name_lookup
6936           (bfd *abfd, const char *reloc_name);
6937
6938 DESCRIPTION
6939         Return a pointer to a howto structure which, when
6940         invoked, will perform the relocation @var{code} on data from the
6941         architecture noted.
6942
6943 */
6944
6945 reloc_howto_type *
6946 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
6947 {
6948   return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
6949 }
6950
6951 reloc_howto_type *
6952 bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
6953 {
6954   return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
6955 }
6956
6957 static reloc_howto_type bfd_howto_32 =
6958 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
6959
6960 /*
6961 INTERNAL_FUNCTION
6962         bfd_default_reloc_type_lookup
6963
6964 SYNOPSIS
6965         reloc_howto_type *bfd_default_reloc_type_lookup
6966           (bfd *abfd, bfd_reloc_code_real_type  code);
6967
6968 DESCRIPTION
6969         Provides a default relocation lookup routine for any architecture.
6970
6971 */
6972
6973 reloc_howto_type *
6974 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
6975 {
6976   switch (code)
6977     {
6978     case BFD_RELOC_CTOR:
6979       /* The type of reloc used in a ctor, which will be as wide as the
6980          address - so either a 64, 32, or 16 bitter.  */
6981       switch (bfd_arch_bits_per_address (abfd))
6982         {
6983         case 64:
6984           BFD_FAIL ();
6985         case 32:
6986           return &bfd_howto_32;
6987         case 16:
6988           BFD_FAIL ();
6989         default:
6990           BFD_FAIL ();
6991         }
6992     default:
6993       BFD_FAIL ();
6994     }
6995   return NULL;
6996 }
6997
6998 /*
6999 FUNCTION
7000         bfd_get_reloc_code_name
7001
7002 SYNOPSIS
7003         const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
7004
7005 DESCRIPTION
7006         Provides a printable name for the supplied relocation code.
7007         Useful mainly for printing error messages.
7008 */
7009
7010 const char *
7011 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
7012 {
7013   if (code > BFD_RELOC_UNUSED)
7014     return 0;
7015   return bfd_reloc_code_real_names[code];
7016 }
7017
7018 /*
7019 INTERNAL_FUNCTION
7020         bfd_generic_relax_section
7021
7022 SYNOPSIS
7023         bfd_boolean bfd_generic_relax_section
7024           (bfd *abfd,
7025            asection *section,
7026            struct bfd_link_info *,
7027            bfd_boolean *);
7028
7029 DESCRIPTION
7030         Provides default handling for relaxing for back ends which
7031         don't do relaxing.
7032 */
7033
7034 bfd_boolean
7035 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
7036                            asection *section ATTRIBUTE_UNUSED,
7037                            struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
7038                            bfd_boolean *again)
7039 {
7040   if (link_info->relocatable)
7041     (*link_info->callbacks->einfo)
7042       (_("%P%F: --relax and -r may not be used together\n"));
7043
7044   *again = FALSE;
7045   return TRUE;
7046 }
7047
7048 /*
7049 INTERNAL_FUNCTION
7050         bfd_generic_gc_sections
7051
7052 SYNOPSIS
7053         bfd_boolean bfd_generic_gc_sections
7054           (bfd *, struct bfd_link_info *);
7055
7056 DESCRIPTION
7057         Provides default handling for relaxing for back ends which
7058         don't do section gc -- i.e., does nothing.
7059 */
7060
7061 bfd_boolean
7062 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
7063                          struct bfd_link_info *info ATTRIBUTE_UNUSED)
7064 {
7065   return TRUE;
7066 }
7067
7068 /*
7069 INTERNAL_FUNCTION
7070         bfd_generic_lookup_section_flags
7071
7072 SYNOPSIS
7073         bfd_boolean bfd_generic_lookup_section_flags
7074           (struct bfd_link_info *, struct flag_info *, asection *);
7075
7076 DESCRIPTION
7077         Provides default handling for section flags lookup
7078         -- i.e., does nothing.
7079         Returns FALSE if the section should be omitted, otherwise TRUE.
7080 */
7081
7082 bfd_boolean
7083 bfd_generic_lookup_section_flags (struct bfd_link_info *info ATTRIBUTE_UNUSED,
7084                                   struct flag_info *flaginfo,
7085                                   asection *section ATTRIBUTE_UNUSED)
7086 {
7087   if (flaginfo != NULL)
7088     {
7089       (*_bfd_error_handler) (_("INPUT_SECTION_FLAGS are not supported.\n"));
7090       return FALSE;
7091     }
7092   return TRUE;
7093 }
7094
7095 /*
7096 INTERNAL_FUNCTION
7097         bfd_generic_merge_sections
7098
7099 SYNOPSIS
7100         bfd_boolean bfd_generic_merge_sections
7101           (bfd *, struct bfd_link_info *);
7102
7103 DESCRIPTION
7104         Provides default handling for SEC_MERGE section merging for back ends
7105         which don't have SEC_MERGE support -- i.e., does nothing.
7106 */
7107
7108 bfd_boolean
7109 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
7110                             struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
7111 {
7112   return TRUE;
7113 }
7114
7115 /*
7116 INTERNAL_FUNCTION
7117         bfd_generic_get_relocated_section_contents
7118
7119 SYNOPSIS
7120         bfd_byte *bfd_generic_get_relocated_section_contents
7121           (bfd *abfd,
7122            struct bfd_link_info *link_info,
7123            struct bfd_link_order *link_order,
7124            bfd_byte *data,
7125            bfd_boolean relocatable,
7126            asymbol **symbols);
7127
7128 DESCRIPTION
7129         Provides default handling of relocation effort for back ends
7130         which can't be bothered to do it efficiently.
7131
7132 */
7133
7134 bfd_byte *
7135 bfd_generic_get_relocated_section_contents (bfd *abfd,
7136                                             struct bfd_link_info *link_info,
7137                                             struct bfd_link_order *link_order,
7138                                             bfd_byte *data,
7139                                             bfd_boolean relocatable,
7140                                             asymbol **symbols)
7141 {
7142   bfd *input_bfd = link_order->u.indirect.section->owner;
7143   asection *input_section = link_order->u.indirect.section;
7144   long reloc_size;
7145   arelent **reloc_vector;
7146   long reloc_count;
7147
7148   reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
7149   if (reloc_size < 0)
7150     return NULL;
7151
7152   /* Read in the section.  */
7153   if (!bfd_get_full_section_contents (input_bfd, input_section, &data))
7154     return NULL;
7155
7156   if (reloc_size == 0)
7157     return data;
7158
7159   reloc_vector = (arelent **) bfd_malloc (reloc_size);
7160   if (reloc_vector == NULL)
7161     return NULL;
7162
7163   reloc_count = bfd_canonicalize_reloc (input_bfd,
7164                                         input_section,
7165                                         reloc_vector,
7166                                         symbols);
7167   if (reloc_count < 0)
7168     goto error_return;
7169
7170   if (reloc_count > 0)
7171     {
7172       arelent **parent;
7173       for (parent = reloc_vector; *parent != NULL; parent++)
7174         {
7175           char *error_message = NULL;
7176           asymbol *symbol;
7177           bfd_reloc_status_type r;
7178
7179           symbol = *(*parent)->sym_ptr_ptr;
7180           if (symbol->section && discarded_section (symbol->section))
7181             {
7182               bfd_byte *p;
7183               static reloc_howto_type none_howto
7184                 = HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
7185                          "unused", FALSE, 0, 0, FALSE);
7186
7187               p = data + (*parent)->address * bfd_octets_per_byte (input_bfd);
7188               _bfd_clear_contents ((*parent)->howto, input_bfd, input_section,
7189                                    p);
7190               (*parent)->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
7191               (*parent)->addend = 0;
7192               (*parent)->howto = &none_howto;
7193               r = bfd_reloc_ok;
7194             }
7195           else
7196             r = bfd_perform_relocation (input_bfd,
7197                                         *parent,
7198                                         data,
7199                                         input_section,
7200                                         relocatable ? abfd : NULL,
7201                                         &error_message);
7202
7203           if (relocatable)
7204             {
7205               asection *os = input_section->output_section;
7206
7207               /* A partial link, so keep the relocs.  */
7208               os->orelocation[os->reloc_count] = *parent;
7209               os->reloc_count++;
7210             }
7211
7212           if (r != bfd_reloc_ok)
7213             {
7214               switch (r)
7215                 {
7216                 case bfd_reloc_undefined:
7217                   if (!((*link_info->callbacks->undefined_symbol)
7218                         (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
7219                          input_bfd, input_section, (*parent)->address,
7220                          TRUE)))
7221                     goto error_return;
7222                   break;
7223                 case bfd_reloc_dangerous:
7224                   BFD_ASSERT (error_message != NULL);
7225                   if (!((*link_info->callbacks->reloc_dangerous)
7226                         (link_info, error_message, input_bfd, input_section,
7227                          (*parent)->address)))
7228                     goto error_return;
7229                   break;
7230                 case bfd_reloc_overflow:
7231                   if (!((*link_info->callbacks->reloc_overflow)
7232                         (link_info, NULL,
7233                          bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
7234                          (*parent)->howto->name, (*parent)->addend,
7235                          input_bfd, input_section, (*parent)->address)))
7236                     goto error_return;
7237                   break;
7238                 case bfd_reloc_outofrange:
7239                   /* PR ld/13730:
7240                      This error can result when processing some partially
7241                      complete binaries.  Do not abort, but issue an error
7242                      message instead.  */
7243                   link_info->callbacks->einfo
7244                     (_("%X%P: %B(%A): relocation \"%R\" goes out of range\n"),
7245                      abfd, input_section, * parent);
7246                   goto error_return;
7247
7248                 default:
7249                   abort ();
7250                   break;
7251                 }
7252
7253             }
7254         }
7255     }
7256
7257   free (reloc_vector);
7258   return data;
7259
7260 error_return:
7261   free (reloc_vector);
7262   return NULL;
7263 }