projects / deliverable / binutils-gdb.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Adds support for writing values to AVR system I/O registers.
[deliverable/binutils-gdb.git] / bfd / reloc.c
1 /* BFD support for handling relocation entries.
2 Copyright (C) 1990-2014 Free Software Foundation, Inc.
3 Written by Cygnus Support.
4
5 This file is part of BFD, the Binary File Descriptor library.
6
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 3 of the License, or
10 (at your option) any later version.
11
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
16
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
20 MA 02110-1301, USA. */
21
22 /*
23 SECTION
24 Relocations
25
26 BFD maintains relocations in much the same way it maintains
27 symbols: they are left alone until required, then read in
28 en-masse and translated into an internal form. A common
29 routine <<bfd_perform_relocation>> acts upon the
30 canonical form to do the fixup.
31
32 Relocations are maintained on a per section basis,
33 while symbols are maintained on a per BFD basis.
34
35 All that a back end has to do to fit the BFD interface is to create
36 a <<struct reloc_cache_entry>> for each relocation
37 in a particular section, and fill in the right bits of the structures.
38
39 @menu
40 @* typedef arelent::
41 @* howto manager::
42 @end menu
43
44 */
45
46 /* DO compile in the reloc_code name table from libbfd.h. */
47 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
48
49 #include "sysdep.h"
50 #include "bfd.h"
51 #include "bfdlink.h"
52 #include "libbfd.h"
53 /*
54 DOCDD
55 INODE
56 typedef arelent, howto manager, Relocations, Relocations
57
58 SUBSECTION
59 typedef arelent
60
61 This is the structure of a relocation entry:
62
63 CODE_FRAGMENT
64 .
65 .typedef enum bfd_reloc_status
66 .{
67 . {* No errors detected. *}
68 . bfd_reloc_ok,
69 .
70 . {* The relocation was performed, but there was an overflow. *}
71 . bfd_reloc_overflow,
72 .
73 . {* The address to relocate was not within the section supplied. *}
74 . bfd_reloc_outofrange,
75 .
76 . {* Used by special functions. *}
77 . bfd_reloc_continue,
78 .
79 . {* Unsupported relocation size requested. *}
80 . bfd_reloc_notsupported,
81 .
82 . {* Unused. *}
83 . bfd_reloc_other,
84 .
85 . {* The symbol to relocate against was undefined. *}
86 . bfd_reloc_undefined,
87 .
88 . {* The relocation was performed, but may not be ok - presently
89 . generated only when linking i960 coff files with i960 b.out
90 . symbols. If this type is returned, the error_message argument
91 . to bfd_perform_relocation will be set. *}
92 . bfd_reloc_dangerous
93 . }
94 . bfd_reloc_status_type;
95 .
96 .
97 .typedef struct reloc_cache_entry
98 .{
99 . {* A pointer into the canonical table of pointers. *}
100 . struct bfd_symbol **sym_ptr_ptr;
101 .
102 . {* offset in section. *}
103 . bfd_size_type address;
104 .
105 . {* addend for relocation value. *}
106 . bfd_vma addend;
107 .
108 . {* Pointer to how to perform the required relocation. *}
109 . reloc_howto_type *howto;
110 .
111 .}
112 .arelent;
113 .
114 */
115
116 /*
117 DESCRIPTION
118
119 Here is a description of each of the fields within an <<arelent>>:
120
121 o <<sym_ptr_ptr>>
122
123 The symbol table pointer points to a pointer to the symbol
124 associated with the relocation request. It is the pointer
125 into the table returned by the back end's
126 <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
127 referenced through a pointer to a pointer so that tools like
128 the linker can fix up all the symbols of the same name by
129 modifying only one pointer. The relocation routine looks in
130 the symbol and uses the base of the section the symbol is
131 attached to and the value of the symbol as the initial
132 relocation offset. If the symbol pointer is zero, then the
133 section provided is looked up.
134
135 o <<address>>
136
137 The <<address>> field gives the offset in bytes from the base of
138 the section data which owns the relocation record to the first
139 byte of relocatable information. The actual data relocated
140 will be relative to this point; for example, a relocation
141 type which modifies the bottom two bytes of a four byte word
142 would not touch the first byte pointed to in a big endian
143 world.
144
145 o <<addend>>
146
147 The <<addend>> is a value provided by the back end to be added (!)
148 to the relocation offset. Its interpretation is dependent upon
149 the howto. For example, on the 68k the code:
150
151 | char foo[];
152 | main()
153 | {
154 | return foo[0x12345678];
155 | }
156
157 Could be compiled into:
158
159 | linkw fp,#-4
160 | moveb @@#12345678,d0
161 | extbl d0
162 | unlk fp
163 | rts
164
165 This could create a reloc pointing to <<foo>>, but leave the
166 offset in the data, something like:
167
168 |RELOCATION RECORDS FOR [.text]:
169 |offset type value
170 |00000006 32 _foo
171 |
172 |00000000 4e56 fffc ; linkw fp,#-4
173 |00000004 1039 1234 5678 ; moveb @@#12345678,d0
174 |0000000a 49c0 ; extbl d0
175 |0000000c 4e5e ; unlk fp
176 |0000000e 4e75 ; rts
177
178 Using coff and an 88k, some instructions don't have enough
179 space in them to represent the full address range, and
180 pointers have to be loaded in two parts. So you'd get something like:
181
182 | or.u r13,r0,hi16(_foo+0x12345678)
183 | ld.b r2,r13,lo16(_foo+0x12345678)
184 | jmp r1
185
186 This should create two relocs, both pointing to <<_foo>>, and with
187 0x12340000 in their addend field. The data would consist of:
188
189 |RELOCATION RECORDS FOR [.text]:
190 |offset type value
191 |00000002 HVRT16 _foo+0x12340000
192 |00000006 LVRT16 _foo+0x12340000
193 |
194 |00000000 5da05678 ; or.u r13,r0,0x5678
195 |00000004 1c4d5678 ; ld.b r2,r13,0x5678
196 |00000008 f400c001 ; jmp r1
197
198 The relocation routine digs out the value from the data, adds
199 it to the addend to get the original offset, and then adds the
200 value of <<_foo>>. Note that all 32 bits have to be kept around
201 somewhere, to cope with carry from bit 15 to bit 16.
202
203 One further example is the sparc and the a.out format. The
204 sparc has a similar problem to the 88k, in that some
205 instructions don't have room for an entire offset, but on the
206 sparc the parts are created in odd sized lumps. The designers of
207 the a.out format chose to not use the data within the section
208 for storing part of the offset; all the offset is kept within
209 the reloc. Anything in the data should be ignored.
210
211 | save %sp,-112,%sp
212 | sethi %hi(_foo+0x12345678),%g2
213 | ldsb [%g2+%lo(_foo+0x12345678)],%i0
214 | ret
215 | restore
216
217 Both relocs contain a pointer to <<foo>>, and the offsets
218 contain junk.
219
220 |RELOCATION RECORDS FOR [.text]:
221 |offset type value
222 |00000004 HI22 _foo+0x12345678
223 |00000008 LO10 _foo+0x12345678
224 |
225 |00000000 9de3bf90 ; save %sp,-112,%sp
226 |00000004 05000000 ; sethi %hi(_foo+0),%g2
227 |00000008 f048a000 ; ldsb [%g2+%lo(_foo+0)],%i0
228 |0000000c 81c7e008 ; ret
229 |00000010 81e80000 ; restore
230
231 o <<howto>>
232
233 The <<howto>> field can be imagined as a
234 relocation instruction. It is a pointer to a structure which
235 contains information on what to do with all of the other
236 information in the reloc record and data section. A back end
237 would normally have a relocation instruction set and turn
238 relocations into pointers to the correct structure on input -
239 but it would be possible to create each howto field on demand.
240
241 */
242
243 /*
244 SUBSUBSECTION
245 <<enum complain_overflow>>
246
247 Indicates what sort of overflow checking should be done when
248 performing a relocation.
249
250 CODE_FRAGMENT
251 .
252 .enum complain_overflow
253 .{
254 . {* Do not complain on overflow. *}
255 . complain_overflow_dont,
256 .
257 . {* Complain if the value overflows when considered as a signed
258 . number one bit larger than the field. ie. A bitfield of N bits
259 . is allowed to represent -2**n to 2**n-1. *}
260 . complain_overflow_bitfield,
261 .
262 . {* Complain if the value overflows when considered as a signed
263 . number. *}
264 . complain_overflow_signed,
265 .
266 . {* Complain if the value overflows when considered as an
267 . unsigned number. *}
268 . complain_overflow_unsigned
269 .};
270
271 */
272
273 /*
274 SUBSUBSECTION
275 <<reloc_howto_type>>
276
277 The <<reloc_howto_type>> is a structure which contains all the
278 information that libbfd needs to know to tie up a back end's data.
279
280 CODE_FRAGMENT
281 .struct bfd_symbol; {* Forward declaration. *}
282 .
283 .struct reloc_howto_struct
284 .{
285 . {* The type field has mainly a documentary use - the back end can
286 . do what it wants with it, though normally the back end's
287 . external idea of what a reloc number is stored
288 . in this field. For example, a PC relative word relocation
289 . in a coff environment has the type 023 - because that's
290 . what the outside world calls a R_PCRWORD reloc. *}
291 . unsigned int type;
292 .
293 . {* The value the final relocation is shifted right by. This drops
294 . unwanted data from the relocation. *}
295 . unsigned int rightshift;
296 .
297 . {* The size of the item to be relocated. This is *not* a
298 . power-of-two measure. To get the number of bytes operated
299 . on by a type of relocation, use bfd_get_reloc_size. *}
300 . int size;
301 .
302 . {* The number of bits in the item to be relocated. This is used
303 . when doing overflow checking. *}
304 . unsigned int bitsize;
305 .
306 . {* The relocation is relative to the field being relocated. *}
307 . bfd_boolean pc_relative;
308 .
309 . {* The bit position of the reloc value in the destination.
310 . The relocated value is left shifted by this amount. *}
311 . unsigned int bitpos;
312 .
313 . {* What type of overflow error should be checked for when
314 . relocating. *}
315 . enum complain_overflow complain_on_overflow;
316 .
317 . {* If this field is non null, then the supplied function is
318 . called rather than the normal function. This allows really
319 . strange relocation methods to be accommodated (e.g., i960 callj
320 . instructions). *}
321 . bfd_reloc_status_type (*special_function)
322 . (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
323 . bfd *, char **);
324 .
325 . {* The textual name of the relocation type. *}
326 . char *name;
327 .
328 . {* Some formats record a relocation addend in the section contents
329 . rather than with the relocation. For ELF formats this is the
330 . distinction between USE_REL and USE_RELA (though the code checks
331 . for USE_REL == 1/0). The value of this field is TRUE if the
332 . addend is recorded with the section contents; when performing a
333 . partial link (ld -r) the section contents (the data) will be
334 . modified. The value of this field is FALSE if addends are
335 . recorded with the relocation (in arelent.addend); when performing
336 . a partial link the relocation will be modified.
337 . All relocations for all ELF USE_RELA targets should set this field
338 . to FALSE (values of TRUE should be looked on with suspicion).
339 . However, the converse is not true: not all relocations of all ELF
340 . USE_REL targets set this field to TRUE. Why this is so is peculiar
341 . to each particular target. For relocs that aren't used in partial
342 . links (e.g. GOT stuff) it doesn't matter what this is set to. *}
343 . bfd_boolean partial_inplace;
344 .
345 . {* src_mask selects the part of the instruction (or data) to be used
346 . in the relocation sum. If the target relocations don't have an
347 . addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
348 . dst_mask to extract the addend from the section contents. If
349 . relocations do have an addend in the reloc, eg. ELF USE_RELA, this
350 . field should be zero. Non-zero values for ELF USE_RELA targets are
351 . bogus as in those cases the value in the dst_mask part of the
352 . section contents should be treated as garbage. *}
353 . bfd_vma src_mask;
354 .
355 . {* dst_mask selects which parts of the instruction (or data) are
356 . replaced with a relocated value. *}
357 . bfd_vma dst_mask;
358 .
359 . {* When some formats create PC relative instructions, they leave
360 . the value of the pc of the place being relocated in the offset
361 . slot of the instruction, so that a PC relative relocation can
362 . be made just by adding in an ordinary offset (e.g., sun3 a.out).
363 . Some formats leave the displacement part of an instruction
364 . empty (e.g., m88k bcs); this flag signals the fact. *}
365 . bfd_boolean pcrel_offset;
366 .};
367 .
368 */
369
370 /*
371 FUNCTION
372 The HOWTO Macro
373
374 DESCRIPTION
375 The HOWTO define is horrible and will go away.
376
377 .#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
378 . { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
379
380 DESCRIPTION
381 And will be replaced with the totally magic way. But for the
382 moment, we are compatible, so do it this way.
383
384 .#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
385 . HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
386 . NAME, FALSE, 0, 0, IN)
387 .
388
389 DESCRIPTION
390 This is used to fill in an empty howto entry in an array.
391
392 .#define EMPTY_HOWTO(C) \
393 . HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
394 . NULL, FALSE, 0, 0, FALSE)
395 .
396
397 DESCRIPTION
398 Helper routine to turn a symbol into a relocation value.
399
400 .#define HOWTO_PREPARE(relocation, symbol) \
401 . { \
402 . if (symbol != NULL) \
403 . { \
404 . if (bfd_is_com_section (symbol->section)) \
405 . { \
406 . relocation = 0; \
407 . } \
408 . else \
409 . { \
410 . relocation = symbol->value; \
411 . } \
412 . } \
413 . }
414 .
415 */
416
417 /*
418 FUNCTION
419 bfd_get_reloc_size
420
421 SYNOPSIS
422 unsigned int bfd_get_reloc_size (reloc_howto_type *);
423
424 DESCRIPTION
425 For a reloc_howto_type that operates on a fixed number of bytes,
426 this returns the number of bytes operated on.
427 */
428
429 unsigned int
430 bfd_get_reloc_size (reloc_howto_type *howto)
431 {
432 switch (howto->size)
433 {
434 case 0: return 1;
435 case 1: return 2;
436 case 2: return 4;
437 case 3: return 0;
438 case 4: return 8;
439 case 8: return 16;
440 case -2: return 4;
441 default: abort ();
442 }
443 }
444
445 /*
446 TYPEDEF
447 arelent_chain
448
449 DESCRIPTION
450
451 How relocs are tied together in an <<asection>>:
452
453 .typedef struct relent_chain
454 .{
455 . arelent relent;
456 . struct relent_chain *next;
457 .}
458 .arelent_chain;
459 .
460 */
461
462 /* N_ONES produces N one bits, without overflowing machine arithmetic. */
463 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
464
465 /*
466 FUNCTION
467 bfd_check_overflow
468
469 SYNOPSIS
470 bfd_reloc_status_type bfd_check_overflow
471 (enum complain_overflow how,
472 unsigned int bitsize,
473 unsigned int rightshift,
474 unsigned int addrsize,
475 bfd_vma relocation);
476
477 DESCRIPTION
478 Perform overflow checking on @var{relocation} which has
479 @var{bitsize} significant bits and will be shifted right by
480 @var{rightshift} bits, on a machine with addresses containing
481 @var{addrsize} significant bits. The result is either of
482 @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
483
484 */
485
486 bfd_reloc_status_type
487 bfd_check_overflow (enum complain_overflow how,
488 unsigned int bitsize,
489 unsigned int rightshift,
490 unsigned int addrsize,
491 bfd_vma relocation)
492 {
493 bfd_vma fieldmask, addrmask, signmask, ss, a;
494 bfd_reloc_status_type flag = bfd_reloc_ok;
495
496 /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
497 we'll be permissive: extra bits in the field mask will
498 automatically extend the address mask for purposes of the
499 overflow check. */
500 fieldmask = N_ONES (bitsize);
501 signmask = ~fieldmask;
502 addrmask = N_ONES (addrsize) | (fieldmask << rightshift);
503 a = (relocation & addrmask) >> rightshift;
504
505 switch (how)
506 {
507 case complain_overflow_dont:
508 break;
509
510 case complain_overflow_signed:
511 /* If any sign bits are set, all sign bits must be set. That
512 is, A must be a valid negative address after shifting. */
513 signmask = ~ (fieldmask >> 1);
514 /* Fall thru */
515
516 case complain_overflow_bitfield:
517 /* Bitfields are sometimes signed, sometimes unsigned. We
518 explicitly allow an address wrap too, which means a bitfield
519 of n bits is allowed to store -2**n to 2**n-1. Thus overflow
520 if the value has some, but not all, bits set outside the
521 field. */
522 ss = a & signmask;
523 if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
524 flag = bfd_reloc_overflow;
525 break;
526
527 case complain_overflow_unsigned:
528 /* We have an overflow if the address does not fit in the field. */
529 if ((a & signmask) != 0)
530 flag = bfd_reloc_overflow;
531 break;
532
533 default:
534 abort ();
535 }
536
537 return flag;
538 }
539
540 /*
541 FUNCTION
542 bfd_perform_relocation
543
544 SYNOPSIS
545 bfd_reloc_status_type bfd_perform_relocation
546 (bfd *abfd,
547 arelent *reloc_entry,
548 void *data,
549 asection *input_section,
550 bfd *output_bfd,
551 char **error_message);
552
553 DESCRIPTION
554 If @var{output_bfd} is supplied to this function, the
555 generated image will be relocatable; the relocations are
556 copied to the output file after they have been changed to
557 reflect the new state of the world. There are two ways of
558 reflecting the results of partial linkage in an output file:
559 by modifying the output data in place, and by modifying the
560 relocation record. Some native formats (e.g., basic a.out and
561 basic coff) have no way of specifying an addend in the
562 relocation type, so the addend has to go in the output data.
563 This is no big deal since in these formats the output data
564 slot will always be big enough for the addend. Complex reloc
565 types with addends were invented to solve just this problem.
566 The @var{error_message} argument is set to an error message if
567 this return @code{bfd_reloc_dangerous}.
568
569 */
570
571 bfd_reloc_status_type
572 bfd_perform_relocation (bfd *abfd,
573 arelent *reloc_entry,
574 void *data,
575 asection *input_section,
576 bfd *output_bfd,
577 char **error_message)
578 {
579 bfd_vma relocation;
580 bfd_reloc_status_type flag = bfd_reloc_ok;
581 bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
582 bfd_vma output_base = 0;
583 reloc_howto_type *howto = reloc_entry->howto;
584 asection *reloc_target_output_section;
585 asymbol *symbol;
586
587 symbol = *(reloc_entry->sym_ptr_ptr);
588 if (bfd_is_abs_section (symbol->section)
589 && output_bfd != NULL)
590 {
591 reloc_entry->address += input_section->output_offset;
592 return bfd_reloc_ok;
593 }
594
595 /* If we are not producing relocatable output, return an error if
596 the symbol is not defined. An undefined weak symbol is
597 considered to have a value of zero (SVR4 ABI, p. 4-27). */
598 if (bfd_is_und_section (symbol->section)
599 && (symbol->flags & BSF_WEAK) == 0
600 && output_bfd == NULL)
601 flag = bfd_reloc_undefined;
602
603 /* If there is a function supplied to handle this relocation type,
604 call it. It'll return `bfd_reloc_continue' if further processing
605 can be done. */
606 if (howto->special_function)
607 {
608 bfd_reloc_status_type cont;
609 cont = howto->special_function (abfd, reloc_entry, symbol, data,
610 input_section, output_bfd,
611 error_message);
612 if (cont != bfd_reloc_continue)
613 return cont;
614 }
615
616 /* Is the address of the relocation really within the section? */
617 if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
618 return bfd_reloc_outofrange;
619
620 /* Work out which section the relocation is targeted at and the
621 initial relocation command value. */
622
623 /* Get symbol value. (Common symbols are special.) */
624 if (bfd_is_com_section (symbol->section))
625 relocation = 0;
626 else
627 relocation = symbol->value;
628
629 reloc_target_output_section = symbol->section->output_section;
630
631 /* Convert input-section-relative symbol value to absolute. */
632 if ((output_bfd && ! howto->partial_inplace)
633 || reloc_target_output_section == NULL)
634 output_base = 0;
635 else
636 output_base = reloc_target_output_section->vma;
637
638 relocation += output_base + symbol->section->output_offset;
639
640 /* Add in supplied addend. */
641 relocation += reloc_entry->addend;
642
643 /* Here the variable relocation holds the final address of the
644 symbol we are relocating against, plus any addend. */
645
646 if (howto->pc_relative)
647 {
648 /* This is a PC relative relocation. We want to set RELOCATION
649 to the distance between the address of the symbol and the
650 location. RELOCATION is already the address of the symbol.
651
652 We start by subtracting the address of the section containing
653 the location.
654
655 If pcrel_offset is set, we must further subtract the position
656 of the location within the section. Some targets arrange for
657 the addend to be the negative of the position of the location
658 within the section; for example, i386-aout does this. For
659 i386-aout, pcrel_offset is FALSE. Some other targets do not
660 include the position of the location; for example, m88kbcs,
661 or ELF. For those targets, pcrel_offset is TRUE.
662
663 If we are producing relocatable output, then we must ensure
664 that this reloc will be correctly computed when the final
665 relocation is done. If pcrel_offset is FALSE we want to wind
666 up with the negative of the location within the section,
667 which means we must adjust the existing addend by the change
668 in the location within the section. If pcrel_offset is TRUE
669 we do not want to adjust the existing addend at all.
670
671 FIXME: This seems logical to me, but for the case of
672 producing relocatable output it is not what the code
673 actually does. I don't want to change it, because it seems
674 far too likely that something will break. */
675
676 relocation -=
677 input_section->output_section->vma + input_section->output_offset;
678
679 if (howto->pcrel_offset)
680 relocation -= reloc_entry->address;
681 }
682
683 if (output_bfd != NULL)
684 {
685 if (! howto->partial_inplace)
686 {
687 /* This is a partial relocation, and we want to apply the relocation
688 to the reloc entry rather than the raw data. Modify the reloc
689 inplace to reflect what we now know. */
690 reloc_entry->addend = relocation;
691 reloc_entry->address += input_section->output_offset;
692 return flag;
693 }
694 else
695 {
696 /* This is a partial relocation, but inplace, so modify the
697 reloc record a bit.
698
699 If we've relocated with a symbol with a section, change
700 into a ref to the section belonging to the symbol. */
701
702 reloc_entry->address += input_section->output_offset;
703
704 /* WTF?? */
705 if (abfd->xvec->flavour == bfd_target_coff_flavour
706 && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
707 && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
708 {
709 /* For m68k-coff, the addend was being subtracted twice during
710 relocation with -r. Removing the line below this comment
711 fixes that problem; see PR 2953.
712
713 However, Ian wrote the following, regarding removing the line below,
714 which explains why it is still enabled: --djm
715
716 If you put a patch like that into BFD you need to check all the COFF
717 linkers. I am fairly certain that patch will break coff-i386 (e.g.,
718 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
719 problem in a different way. There may very well be a reason that the
720 code works as it does.
721
722 Hmmm. The first obvious point is that bfd_perform_relocation should
723 not have any tests that depend upon the flavour. It's seem like
724 entirely the wrong place for such a thing. The second obvious point
725 is that the current code ignores the reloc addend when producing
726 relocatable output for COFF. That's peculiar. In fact, I really
727 have no idea what the point of the line you want to remove is.
728
729 A typical COFF reloc subtracts the old value of the symbol and adds in
730 the new value to the location in the object file (if it's a pc
731 relative reloc it adds the difference between the symbol value and the
732 location). When relocating we need to preserve that property.
733
734 BFD handles this by setting the addend to the negative of the old
735 value of the symbol. Unfortunately it handles common symbols in a
736 non-standard way (it doesn't subtract the old value) but that's a
737 different story (we can't change it without losing backward
738 compatibility with old object files) (coff-i386 does subtract the old
739 value, to be compatible with existing coff-i386 targets, like SCO).
740
741 So everything works fine when not producing relocatable output. When
742 we are producing relocatable output, logically we should do exactly
743 what we do when not producing relocatable output. Therefore, your
744 patch is correct. In fact, it should probably always just set
745 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
746 add the value into the object file. This won't hurt the COFF code,
747 which doesn't use the addend; I'm not sure what it will do to other
748 formats (the thing to check for would be whether any formats both use
749 the addend and set partial_inplace).
750
751 When I wanted to make coff-i386 produce relocatable output, I ran
752 into the problem that you are running into: I wanted to remove that
753 line. Rather than risk it, I made the coff-i386 relocs use a special
754 function; it's coff_i386_reloc in coff-i386.c. The function
755 specifically adds the addend field into the object file, knowing that
756 bfd_perform_relocation is not going to. If you remove that line, then
757 coff-i386.c will wind up adding the addend field in twice. It's
758 trivial to fix; it just needs to be done.
759
760 The problem with removing the line is just that it may break some
761 working code. With BFD it's hard to be sure of anything. The right
762 way to deal with this is simply to build and test at least all the
763 supported COFF targets. It should be straightforward if time and disk
764 space consuming. For each target:
765 1) build the linker
766 2) generate some executable, and link it using -r (I would
767 probably use paranoia.o and link against newlib/libc.a, which
768 for all the supported targets would be available in
769 /usr/cygnus/progressive/H-host/target/lib/libc.a).
770 3) make the change to reloc.c
771 4) rebuild the linker
772 5) repeat step 2
773 6) if the resulting object files are the same, you have at least
774 made it no worse
775 7) if they are different you have to figure out which version is
776 right
777 */
778 relocation -= reloc_entry->addend;
779 reloc_entry->addend = 0;
780 }
781 else
782 {
783 reloc_entry->addend = relocation;
784 }
785 }
786 }
787
788 /* FIXME: This overflow checking is incomplete, because the value
789 might have overflowed before we get here. For a correct check we
790 need to compute the value in a size larger than bitsize, but we
791 can't reasonably do that for a reloc the same size as a host
792 machine word.
793 FIXME: We should also do overflow checking on the result after
794 adding in the value contained in the object file. */
795 if (howto->complain_on_overflow != complain_overflow_dont
796 && flag == bfd_reloc_ok)
797 flag = bfd_check_overflow (howto->complain_on_overflow,
798 howto->bitsize,
799 howto->rightshift,
800 bfd_arch_bits_per_address (abfd),
801 relocation);
802
803 /* Either we are relocating all the way, or we don't want to apply
804 the relocation to the reloc entry (probably because there isn't
805 any room in the output format to describe addends to relocs). */
806
807 /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
808 (OSF version 1.3, compiler version 3.11). It miscompiles the
809 following program:
810
811 struct str
812 {
813 unsigned int i0;
814 } s = { 0 };
815
816 int
817 main ()
818 {
819 unsigned long x;
820
821 x = 0x100000000;
822 x <<= (unsigned long) s.i0;
823 if (x == 0)
824 printf ("failed\n");
825 else
826 printf ("succeeded (%lx)\n", x);
827 }
828 */
829
830 relocation >>= (bfd_vma) howto->rightshift;
831
832 /* Shift everything up to where it's going to be used. */
833 relocation <<= (bfd_vma) howto->bitpos;
834
835 /* Wait for the day when all have the mask in them. */
836
837 /* What we do:
838 i instruction to be left alone
839 o offset within instruction
840 r relocation offset to apply
841 S src mask
842 D dst mask
843 N ~dst mask
844 A part 1
845 B part 2
846 R result
847
848 Do this:
849 (( i i i i i o o o o o from bfd_get<size>
850 and S S S S S) to get the size offset we want
851 + r r r r r r r r r r) to get the final value to place
852 and D D D D D to chop to right size
853 -----------------------
854 = A A A A A
855 And this:
856 ( i i i i i o o o o o from bfd_get<size>
857 and N N N N N ) get instruction
858 -----------------------
859 = B B B B B
860
861 And then:
862 ( B B B B B
863 or A A A A A)
864 -----------------------
865 = R R R R R R R R R R put into bfd_put<size>
866 */
867
868 #define DOIT(x) \
869 x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) + relocation) & howto->dst_mask))
870
871 switch (howto->size)
872 {
873 case 0:
874 {
875 char x = bfd_get_8 (abfd, (char *) data + octets);
876 DOIT (x);
877 bfd_put_8 (abfd, x, (unsigned char *) data + octets);
878 }
879 break;
880
881 case 1:
882 {
883 short x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
884 DOIT (x);
885 bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data + octets);
886 }
887 break;
888 case 2:
889 {
890 long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
891 DOIT (x);
892 bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
893 }
894 break;
895 case -2:
896 {
897 long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
898 relocation = -relocation;
899 DOIT (x);
900 bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
901 }
902 break;
903
904 case -1:
905 {
906 long x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
907 relocation = -relocation;
908 DOIT (x);
909 bfd_put_16 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
910 }
911 break;
912
913 case 3:
914 /* Do nothing */
915 break;
916
917 case 4:
918 #ifdef BFD64
919 {
920 bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets);
921 DOIT (x);
922 bfd_put_64 (abfd, x, (bfd_byte *) data + octets);
923 }
924 #else
925 abort ();
926 #endif
927 break;
928 default:
929 return bfd_reloc_other;
930 }
931
932 return flag;
933 }
934
935 /*
936 FUNCTION
937 bfd_install_relocation
938
939 SYNOPSIS
940 bfd_reloc_status_type bfd_install_relocation
941 (bfd *abfd,
942 arelent *reloc_entry,
943 void *data, bfd_vma data_start,
944 asection *input_section,
945 char **error_message);
946
947 DESCRIPTION
948 This looks remarkably like <<bfd_perform_relocation>>, except it
949 does not expect that the section contents have been filled in.
950 I.e., it's suitable for use when creating, rather than applying
951 a relocation.
952
953 For now, this function should be considered reserved for the
954 assembler.
955 */
956
957 bfd_reloc_status_type
958 bfd_install_relocation (bfd *abfd,
959 arelent *reloc_entry,
960 void *data_start,
961 bfd_vma data_start_offset,
962 asection *input_section,
963 char **error_message)
964 {
965 bfd_vma relocation;
966 bfd_reloc_status_type flag = bfd_reloc_ok;
967 bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
968 bfd_vma output_base = 0;
969 reloc_howto_type *howto = reloc_entry->howto;
970 asection *reloc_target_output_section;
971 asymbol *symbol;
972 bfd_byte *data;
973
974 symbol = *(reloc_entry->sym_ptr_ptr);
975 if (bfd_is_abs_section (symbol->section))
976 {
977 reloc_entry->address += input_section->output_offset;
978 return bfd_reloc_ok;
979 }
980
981 /* If there is a function supplied to handle this relocation type,
982 call it. It'll return `bfd_reloc_continue' if further processing
983 can be done. */
984 if (howto->special_function)
985 {
986 bfd_reloc_status_type cont;
987
988 /* XXX - The special_function calls haven't been fixed up to deal
989 with creating new relocations and section contents. */
990 cont = howto->special_function (abfd, reloc_entry, symbol,
991 /* XXX - Non-portable! */
992 ((bfd_byte *) data_start
993 - data_start_offset),
994 input_section, abfd, error_message);
995 if (cont != bfd_reloc_continue)
996 return cont;
997 }
998
999 /* Is the address of the relocation really within the section? */
1000 if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
1001 return bfd_reloc_outofrange;
1002
1003 /* Work out which section the relocation is targeted at and the
1004 initial relocation command value. */
1005
1006 /* Get symbol value. (Common symbols are special.) */
1007 if (bfd_is_com_section (symbol->section))
1008 relocation = 0;
1009 else
1010 relocation = symbol->value;
1011
1012 reloc_target_output_section = symbol->section->output_section;
1013
1014 /* Convert input-section-relative symbol value to absolute. */
1015 if (! howto->partial_inplace)
1016 output_base = 0;
1017 else
1018 output_base = reloc_target_output_section->vma;
1019
1020 relocation += output_base + symbol->section->output_offset;
1021
1022 /* Add in supplied addend. */
1023 relocation += reloc_entry->addend;
1024
1025 /* Here the variable relocation holds the final address of the
1026 symbol we are relocating against, plus any addend. */
1027
1028 if (howto->pc_relative)
1029 {
1030 /* This is a PC relative relocation. We want to set RELOCATION
1031 to the distance between the address of the symbol and the
1032 location. RELOCATION is already the address of the symbol.
1033
1034 We start by subtracting the address of the section containing
1035 the location.
1036
1037 If pcrel_offset is set, we must further subtract the position
1038 of the location within the section. Some targets arrange for
1039 the addend to be the negative of the position of the location
1040 within the section; for example, i386-aout does this. For
1041 i386-aout, pcrel_offset is FALSE. Some other targets do not
1042 include the position of the location; for example, m88kbcs,
1043 or ELF. For those targets, pcrel_offset is TRUE.
1044
1045 If we are producing relocatable output, then we must ensure
1046 that this reloc will be correctly computed when the final
1047 relocation is done. If pcrel_offset is FALSE we want to wind
1048 up with the negative of the location within the section,
1049 which means we must adjust the existing addend by the change
1050 in the location within the section. If pcrel_offset is TRUE
1051 we do not want to adjust the existing addend at all.
1052
1053 FIXME: This seems logical to me, but for the case of
1054 producing relocatable output it is not what the code
1055 actually does. I don't want to change it, because it seems
1056 far too likely that something will break. */
1057
1058 relocation -=
1059 input_section->output_section->vma + input_section->output_offset;
1060
1061 if (howto->pcrel_offset && howto->partial_inplace)
1062 relocation -= reloc_entry->address;
1063 }
1064
1065 if (! howto->partial_inplace)
1066 {
1067 /* This is a partial relocation, and we want to apply the relocation
1068 to the reloc entry rather than the raw data. Modify the reloc
1069 inplace to reflect what we now know. */
1070 reloc_entry->addend = relocation;
1071 reloc_entry->address += input_section->output_offset;
1072 return flag;
1073 }
1074 else
1075 {
1076 /* This is a partial relocation, but inplace, so modify the
1077 reloc record a bit.
1078
1079 If we've relocated with a symbol with a section, change
1080 into a ref to the section belonging to the symbol. */
1081 reloc_entry->address += input_section->output_offset;
1082
1083 /* WTF?? */
1084 if (abfd->xvec->flavour == bfd_target_coff_flavour
1085 && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1086 && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1087 {
1088
1089 /* For m68k-coff, the addend was being subtracted twice during
1090 relocation with -r. Removing the line below this comment
1091 fixes that problem; see PR 2953.
1092
1093 However, Ian wrote the following, regarding removing the line below,
1094 which explains why it is still enabled: --djm
1095
1096 If you put a patch like that into BFD you need to check all the COFF
1097 linkers. I am fairly certain that patch will break coff-i386 (e.g.,
1098 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1099 problem in a different way. There may very well be a reason that the
1100 code works as it does.
1101
1102 Hmmm. The first obvious point is that bfd_install_relocation should
1103 not have any tests that depend upon the flavour. It's seem like
1104 entirely the wrong place for such a thing. The second obvious point
1105 is that the current code ignores the reloc addend when producing
1106 relocatable output for COFF. That's peculiar. In fact, I really
1107 have no idea what the point of the line you want to remove is.
1108
1109 A typical COFF reloc subtracts the old value of the symbol and adds in
1110 the new value to the location in the object file (if it's a pc
1111 relative reloc it adds the difference between the symbol value and the
1112 location). When relocating we need to preserve that property.
1113
1114 BFD handles this by setting the addend to the negative of the old
1115 value of the symbol. Unfortunately it handles common symbols in a
1116 non-standard way (it doesn't subtract the old value) but that's a
1117 different story (we can't change it without losing backward
1118 compatibility with old object files) (coff-i386 does subtract the old
1119 value, to be compatible with existing coff-i386 targets, like SCO).
1120
1121 So everything works fine when not producing relocatable output. When
1122 we are producing relocatable output, logically we should do exactly
1123 what we do when not producing relocatable output. Therefore, your
1124 patch is correct. In fact, it should probably always just set
1125 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1126 add the value into the object file. This won't hurt the COFF code,
1127 which doesn't use the addend; I'm not sure what it will do to other
1128 formats (the thing to check for would be whether any formats both use
1129 the addend and set partial_inplace).
1130
1131 When I wanted to make coff-i386 produce relocatable output, I ran
1132 into the problem that you are running into: I wanted to remove that
1133 line. Rather than risk it, I made the coff-i386 relocs use a special
1134 function; it's coff_i386_reloc in coff-i386.c. The function
1135 specifically adds the addend field into the object file, knowing that
1136 bfd_install_relocation is not going to. If you remove that line, then
1137 coff-i386.c will wind up adding the addend field in twice. It's
1138 trivial to fix; it just needs to be done.
1139
1140 The problem with removing the line is just that it may break some
1141 working code. With BFD it's hard to be sure of anything. The right
1142 way to deal with this is simply to build and test at least all the
1143 supported COFF targets. It should be straightforward if time and disk
1144 space consuming. For each target:
1145 1) build the linker
1146 2) generate some executable, and link it using -r (I would
1147 probably use paranoia.o and link against newlib/libc.a, which
1148 for all the supported targets would be available in
1149 /usr/cygnus/progressive/H-host/target/lib/libc.a).
1150 3) make the change to reloc.c
1151 4) rebuild the linker
1152 5) repeat step 2
1153 6) if the resulting object files are the same, you have at least
1154 made it no worse
1155 7) if they are different you have to figure out which version is
1156 right. */
1157 relocation -= reloc_entry->addend;
1158 /* FIXME: There should be no target specific code here... */
1159 if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1160 reloc_entry->addend = 0;
1161 }
1162 else
1163 {
1164 reloc_entry->addend = relocation;
1165 }
1166 }
1167
1168 /* FIXME: This overflow checking is incomplete, because the value
1169 might have overflowed before we get here. For a correct check we
1170 need to compute the value in a size larger than bitsize, but we
1171 can't reasonably do that for a reloc the same size as a host
1172 machine word.
1173 FIXME: We should also do overflow checking on the result after
1174 adding in the value contained in the object file. */
1175 if (howto->complain_on_overflow != complain_overflow_dont)
1176 flag = bfd_check_overflow (howto->complain_on_overflow,
1177 howto->bitsize,
1178 howto->rightshift,
1179 bfd_arch_bits_per_address (abfd),
1180 relocation);
1181
1182 /* Either we are relocating all the way, or we don't want to apply
1183 the relocation to the reloc entry (probably because there isn't
1184 any room in the output format to describe addends to relocs). */
1185
1186 /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1187 (OSF version 1.3, compiler version 3.11). It miscompiles the
1188 following program:
1189
1190 struct str
1191 {
1192 unsigned int i0;
1193 } s = { 0 };
1194
1195 int
1196 main ()
1197 {
1198 unsigned long x;
1199
1200 x = 0x100000000;
1201 x <<= (unsigned long) s.i0;
1202 if (x == 0)
1203 printf ("failed\n");
1204 else
1205 printf ("succeeded (%lx)\n", x);
1206 }
1207 */
1208
1209 relocation >>= (bfd_vma) howto->rightshift;
1210
1211 /* Shift everything up to where it's going to be used. */
1212 relocation <<= (bfd_vma) howto->bitpos;
1213
1214 /* Wait for the day when all have the mask in them. */
1215
1216 /* What we do:
1217 i instruction to be left alone
1218 o offset within instruction
1219 r relocation offset to apply
1220 S src mask
1221 D dst mask
1222 N ~dst mask
1223 A part 1
1224 B part 2
1225 R result
1226
1227 Do this:
1228 (( i i i i i o o o o o from bfd_get<size>
1229 and S S S S S) to get the size offset we want
1230 + r r r r r r r r r r) to get the final value to place
1231 and D D D D D to chop to right size
1232 -----------------------
1233 = A A A A A
1234 And this:
1235 ( i i i i i o o o o o from bfd_get<size>
1236 and N N N N N ) get instruction
1237 -----------------------
1238 = B B B B B
1239
1240 And then:
1241 ( B B B B B
1242 or A A A A A)
1243 -----------------------
1244 = R R R R R R R R R R put into bfd_put<size>
1245 */
1246
1247 #define DOIT(x) \
1248 x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) + relocation) & howto->dst_mask))
1249
1250 data = (bfd_byte *) data_start + (octets - data_start_offset);
1251
1252 switch (howto->size)
1253 {
1254 case 0:
1255 {
1256 char x = bfd_get_8 (abfd, data);
1257 DOIT (x);
1258 bfd_put_8 (abfd, x, data);
1259 }
1260 break;
1261
1262 case 1:
1263 {
1264 short x = bfd_get_16 (abfd, data);
1265 DOIT (x);
1266 bfd_put_16 (abfd, (bfd_vma) x, data);
1267 }
1268 break;
1269 case 2:
1270 {
1271 long x = bfd_get_32 (abfd, data);
1272 DOIT (x);
1273 bfd_put_32 (abfd, (bfd_vma) x, data);
1274 }
1275 break;
1276 case -2:
1277 {
1278 long x = bfd_get_32 (abfd, data);
1279 relocation = -relocation;
1280 DOIT (x);
1281 bfd_put_32 (abfd, (bfd_vma) x, data);
1282 }
1283 break;
1284
1285 case 3:
1286 /* Do nothing */
1287 break;
1288
1289 case 4:
1290 {
1291 bfd_vma x = bfd_get_64 (abfd, data);
1292 DOIT (x);
1293 bfd_put_64 (abfd, x, data);
1294 }
1295 break;
1296 default:
1297 return bfd_reloc_other;
1298 }
1299
1300 return flag;
1301 }
1302
1303 /* This relocation routine is used by some of the backend linkers.
1304 They do not construct asymbol or arelent structures, so there is no
1305 reason for them to use bfd_perform_relocation. Also,
1306 bfd_perform_relocation is so hacked up it is easier to write a new
1307 function than to try to deal with it.
1308
1309 This routine does a final relocation. Whether it is useful for a
1310 relocatable link depends upon how the object format defines
1311 relocations.
1312
1313 FIXME: This routine ignores any special_function in the HOWTO,
1314 since the existing special_function values have been written for
1315 bfd_perform_relocation.
1316
1317 HOWTO is the reloc howto information.
1318 INPUT_BFD is the BFD which the reloc applies to.
1319 INPUT_SECTION is the section which the reloc applies to.
1320 CONTENTS is the contents of the section.
1321 ADDRESS is the address of the reloc within INPUT_SECTION.
1322 VALUE is the value of the symbol the reloc refers to.
1323 ADDEND is the addend of the reloc. */
1324
1325 bfd_reloc_status_type
1326 _bfd_final_link_relocate (reloc_howto_type *howto,
1327 bfd *input_bfd,
1328 asection *input_section,
1329 bfd_byte *contents,
1330 bfd_vma address,
1331 bfd_vma value,
1332 bfd_vma addend)
1333 {
1334 bfd_vma relocation;
1335
1336 /* Sanity check the address. */
1337 if (address > bfd_get_section_limit (input_bfd, input_section))
1338 return bfd_reloc_outofrange;
1339
1340 /* This function assumes that we are dealing with a basic relocation
1341 against a symbol. We want to compute the value of the symbol to
1342 relocate to. This is just VALUE, the value of the symbol, plus
1343 ADDEND, any addend associated with the reloc. */
1344 relocation = value + addend;
1345
1346 /* If the relocation is PC relative, we want to set RELOCATION to
1347 the distance between the symbol (currently in RELOCATION) and the
1348 location we are relocating. Some targets (e.g., i386-aout)
1349 arrange for the contents of the section to be the negative of the
1350 offset of the location within the section; for such targets
1351 pcrel_offset is FALSE. Other targets (e.g., m88kbcs or ELF)
1352 simply leave the contents of the section as zero; for such
1353 targets pcrel_offset is TRUE. If pcrel_offset is FALSE we do not
1354 need to subtract out the offset of the location within the
1355 section (which is just ADDRESS). */
1356 if (howto->pc_relative)
1357 {
1358 relocation -= (input_section->output_section->vma
1359 + input_section->output_offset);
1360 if (howto->pcrel_offset)
1361 relocation -= address;
1362 }
1363
1364 return _bfd_relocate_contents (howto, input_bfd, relocation,
1365 contents + address);
1366 }
1367
1368 /* Relocate a given location using a given value and howto. */
1369
1370 bfd_reloc_status_type
1371 _bfd_relocate_contents (reloc_howto_type *howto,
1372 bfd *input_bfd,
1373 bfd_vma relocation,
1374 bfd_byte *location)
1375 {
1376 int size;
1377 bfd_vma x = 0;
1378 bfd_reloc_status_type flag;
1379 unsigned int rightshift = howto->rightshift;
1380 unsigned int bitpos = howto->bitpos;
1381
1382 /* If the size is negative, negate RELOCATION. This isn't very
1383 general. */
1384 if (howto->size < 0)
1385 relocation = -relocation;
1386
1387 /* Get the value we are going to relocate. */
1388 size = bfd_get_reloc_size (howto);
1389 switch (size)
1390 {
1391 default:
1392 case 0:
1393 abort ();
1394 case 1:
1395 x = bfd_get_8 (input_bfd, location);
1396 break;
1397 case 2:
1398 x = bfd_get_16 (input_bfd, location);
1399 break;
1400 case 4:
1401 x = bfd_get_32 (input_bfd, location);
1402 break;
1403 case 8:
1404 #ifdef BFD64
1405 x = bfd_get_64 (input_bfd, location);
1406 #else
1407 abort ();
1408 #endif
1409 break;
1410 }
1411
1412 /* Check for overflow. FIXME: We may drop bits during the addition
1413 which we don't check for. We must either check at every single
1414 operation, which would be tedious, or we must do the computations
1415 in a type larger than bfd_vma, which would be inefficient. */
1416 flag = bfd_reloc_ok;
1417 if (howto->complain_on_overflow != complain_overflow_dont)
1418 {
1419 bfd_vma addrmask, fieldmask, signmask, ss;
1420 bfd_vma a, b, sum;
1421
1422 /* Get the values to be added together. For signed and unsigned
1423 relocations, we assume that all values should be truncated to
1424 the size of an address. For bitfields, all the bits matter.
1425 See also bfd_check_overflow. */
1426 fieldmask = N_ONES (howto->bitsize);
1427 signmask = ~fieldmask;
1428 addrmask = (N_ONES (bfd_arch_bits_per_address (input_bfd))
1429 | (fieldmask << rightshift));
1430 a = (relocation & addrmask) >> rightshift;
1431 b = (x & howto->src_mask & addrmask) >> bitpos;
1432 addrmask >>= rightshift;
1433
1434 switch (howto->complain_on_overflow)
1435 {
1436 case complain_overflow_signed:
1437 /* If any sign bits are set, all sign bits must be set.
1438 That is, A must be a valid negative address after
1439 shifting. */
1440 signmask = ~(fieldmask >> 1);
1441 /* Fall thru */
1442
1443 case complain_overflow_bitfield:
1444 /* Much like the signed check, but for a field one bit
1445 wider. We allow a bitfield to represent numbers in the
1446 range -2**n to 2**n-1, where n is the number of bits in the
1447 field. Note that when bfd_vma is 32 bits, a 32-bit reloc
1448 can't overflow, which is exactly what we want. */
1449 ss = a & signmask;
1450 if (ss != 0 && ss != (addrmask & signmask))
1451 flag = bfd_reloc_overflow;
1452
1453 /* We only need this next bit of code if the sign bit of B
1454 is below the sign bit of A. This would only happen if
1455 SRC_MASK had fewer bits than BITSIZE. Note that if
1456 SRC_MASK has more bits than BITSIZE, we can get into
1457 trouble; we would need to verify that B is in range, as
1458 we do for A above. */
1459 ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1460 ss >>= bitpos;
1461
1462 /* Set all the bits above the sign bit. */
1463 b = (b ^ ss) - ss;
1464
1465 /* Now we can do the addition. */
1466 sum = a + b;
1467
1468 /* See if the result has the correct sign. Bits above the
1469 sign bit are junk now; ignore them. If the sum is
1470 positive, make sure we did not have all negative inputs;
1471 if the sum is negative, make sure we did not have all
1472 positive inputs. The test below looks only at the sign
1473 bits, and it really just
1474 SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1475
1476 We mask with addrmask here to explicitly allow an address
1477 wrap-around. The Linux kernel relies on it, and it is
1478 the only way to write assembler code which can run when
1479 loaded at a location 0x80000000 away from the location at
1480 which it is linked. */
1481 if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1482 flag = bfd_reloc_overflow;
1483 break;
1484
1485 case complain_overflow_unsigned:
1486 /* Checking for an unsigned overflow is relatively easy:
1487 trim the addresses and add, and trim the result as well.
1488 Overflow is normally indicated when the result does not
1489 fit in the field. However, we also need to consider the
1490 case when, e.g., fieldmask is 0x7fffffff or smaller, an
1491 input is 0x80000000, and bfd_vma is only 32 bits; then we
1492 will get sum == 0, but there is an overflow, since the
1493 inputs did not fit in the field. Instead of doing a
1494 separate test, we can check for this by or-ing in the
1495 operands when testing for the sum overflowing its final
1496 field. */
1497 sum = (a + b) & addrmask;
1498 if ((a | b | sum) & signmask)
1499 flag = bfd_reloc_overflow;
1500 break;
1501
1502 default:
1503 abort ();
1504 }
1505 }
1506
1507 /* Put RELOCATION in the right bits. */
1508 relocation >>= (bfd_vma) rightshift;
1509 relocation <<= (bfd_vma) bitpos;
1510
1511 /* Add RELOCATION to the right bits of X. */
1512 x = ((x & ~howto->dst_mask)
1513 | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1514
1515 /* Put the relocated value back in the object file. */
1516 switch (size)
1517 {
1518 default:
1519 abort ();
1520 case 1:
1521 bfd_put_8 (input_bfd, x, location);
1522 break;
1523 case 2:
1524 bfd_put_16 (input_bfd, x, location);
1525 break;
1526 case 4:
1527 bfd_put_32 (input_bfd, x, location);
1528 break;
1529 case 8:
1530 #ifdef BFD64
1531 bfd_put_64 (input_bfd, x, location);
1532 #else
1533 abort ();
1534 #endif
1535 break;
1536 }
1537
1538 return flag;
1539 }
1540
1541 /* Clear a given location using a given howto, by applying a fixed relocation
1542 value and discarding any in-place addend. This is used for fixed-up
1543 relocations against discarded symbols, to make ignorable debug or unwind
1544 information more obvious. */
1545
1546 void
1547 _bfd_clear_contents (reloc_howto_type *howto,
1548 bfd *input_bfd,
1549 asection *input_section,
1550 bfd_byte *location)
1551 {
1552 int size;
1553 bfd_vma x = 0;
1554
1555 /* Get the value we are going to relocate. */
1556 size = bfd_get_reloc_size (howto);
1557 switch (size)
1558 {
1559 default:
1560 case 0:
1561 abort ();
1562 case 1:
1563 x = bfd_get_8 (input_bfd, location);
1564 break;
1565 case 2:
1566 x = bfd_get_16 (input_bfd, location);
1567 break;
1568 case 4:
1569 x = bfd_get_32 (input_bfd, location);
1570 break;
1571 case 8:
1572 #ifdef BFD64
1573 x = bfd_get_64 (input_bfd, location);
1574 #else
1575 abort ();
1576 #endif
1577 break;
1578 }
1579
1580 /* Zero out the unwanted bits of X. */
1581 x &= ~howto->dst_mask;
1582
1583 /* For a range list, use 1 instead of 0 as placeholder. 0
1584 would terminate the list, hiding any later entries. */
1585 if (strcmp (bfd_get_section_name (input_bfd, input_section),
1586 ".debug_ranges") == 0
1587 && (howto->dst_mask & 1) != 0)
1588 x |= 1;
1589
1590 /* Put the relocated value back in the object file. */
1591 switch (size)
1592 {
1593 default:
1594 case 0:
1595 abort ();
1596 case 1:
1597 bfd_put_8 (input_bfd, x, location);
1598 break;
1599 case 2:
1600 bfd_put_16 (input_bfd, x, location);
1601 break;
1602 case 4:
1603 bfd_put_32 (input_bfd, x, location);
1604 break;
1605 case 8:
1606 #ifdef BFD64
1607 bfd_put_64 (input_bfd, x, location);
1608 #else
1609 abort ();
1610 #endif
1611 break;
1612 }
1613 }
1614
1615 /*
1616 DOCDD
1617 INODE
1618 howto manager, , typedef arelent, Relocations
1619
1620 SUBSECTION
1621 The howto manager
1622
1623 When an application wants to create a relocation, but doesn't
1624 know what the target machine might call it, it can find out by
1625 using this bit of code.
1626
1627 */
1628
1629 /*
1630 TYPEDEF
1631 bfd_reloc_code_type
1632
1633 DESCRIPTION
1634 The insides of a reloc code. The idea is that, eventually, there
1635 will be one enumerator for every type of relocation we ever do.
1636 Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1637 return a howto pointer.
1638
1639 This does mean that the application must determine the correct
1640 enumerator value; you can't get a howto pointer from a random set
1641 of attributes.
1642
1643 SENUM
1644 bfd_reloc_code_real
1645
1646 ENUM
1647 BFD_RELOC_64
1648 ENUMX
1649 BFD_RELOC_32
1650 ENUMX
1651 BFD_RELOC_26
1652 ENUMX
1653 BFD_RELOC_24
1654 ENUMX
1655 BFD_RELOC_16
1656 ENUMX
1657 BFD_RELOC_14
1658 ENUMX
1659 BFD_RELOC_8
1660 ENUMDOC
1661 Basic absolute relocations of N bits.
1662
1663 ENUM
1664 BFD_RELOC_64_PCREL
1665 ENUMX
1666 BFD_RELOC_32_PCREL
1667 ENUMX
1668 BFD_RELOC_24_PCREL
1669 ENUMX
1670 BFD_RELOC_16_PCREL
1671 ENUMX
1672 BFD_RELOC_12_PCREL
1673 ENUMX
1674 BFD_RELOC_8_PCREL
1675 ENUMDOC
1676 PC-relative relocations. Sometimes these are relative to the address
1677 of the relocation itself; sometimes they are relative to the start of
1678 the section containing the relocation. It depends on the specific target.
1679
1680 The 24-bit relocation is used in some Intel 960 configurations.
1681
1682 ENUM
1683 BFD_RELOC_32_SECREL
1684 ENUMDOC
1685 Section relative relocations. Some targets need this for DWARF2.
1686
1687 ENUM
1688 BFD_RELOC_32_GOT_PCREL
1689 ENUMX
1690 BFD_RELOC_16_GOT_PCREL
1691 ENUMX
1692 BFD_RELOC_8_GOT_PCREL
1693 ENUMX
1694 BFD_RELOC_32_GOTOFF
1695 ENUMX
1696 BFD_RELOC_16_GOTOFF
1697 ENUMX
1698 BFD_RELOC_LO16_GOTOFF
1699 ENUMX
1700 BFD_RELOC_HI16_GOTOFF
1701 ENUMX
1702 BFD_RELOC_HI16_S_GOTOFF
1703 ENUMX
1704 BFD_RELOC_8_GOTOFF
1705 ENUMX
1706 BFD_RELOC_64_PLT_PCREL
1707 ENUMX
1708 BFD_RELOC_32_PLT_PCREL
1709 ENUMX
1710 BFD_RELOC_24_PLT_PCREL
1711 ENUMX
1712 BFD_RELOC_16_PLT_PCREL
1713 ENUMX
1714 BFD_RELOC_8_PLT_PCREL
1715 ENUMX
1716 BFD_RELOC_64_PLTOFF
1717 ENUMX
1718 BFD_RELOC_32_PLTOFF
1719 ENUMX
1720 BFD_RELOC_16_PLTOFF
1721 ENUMX
1722 BFD_RELOC_LO16_PLTOFF
1723 ENUMX
1724 BFD_RELOC_HI16_PLTOFF
1725 ENUMX
1726 BFD_RELOC_HI16_S_PLTOFF
1727 ENUMX
1728 BFD_RELOC_8_PLTOFF
1729 ENUMDOC
1730 For ELF.
1731
1732 ENUM
1733 BFD_RELOC_SIZE32
1734 ENUMX
1735 BFD_RELOC_SIZE64
1736 ENUMDOC
1737 Size relocations.
1738
1739 ENUM
1740 BFD_RELOC_68K_GLOB_DAT
1741 ENUMX
1742 BFD_RELOC_68K_JMP_SLOT
1743 ENUMX
1744 BFD_RELOC_68K_RELATIVE
1745 ENUMX
1746 BFD_RELOC_68K_TLS_GD32
1747 ENUMX
1748 BFD_RELOC_68K_TLS_GD16
1749 ENUMX
1750 BFD_RELOC_68K_TLS_GD8
1751 ENUMX
1752 BFD_RELOC_68K_TLS_LDM32
1753 ENUMX
1754 BFD_RELOC_68K_TLS_LDM16
1755 ENUMX
1756 BFD_RELOC_68K_TLS_LDM8
1757 ENUMX
1758 BFD_RELOC_68K_TLS_LDO32
1759 ENUMX
1760 BFD_RELOC_68K_TLS_LDO16
1761 ENUMX
1762 BFD_RELOC_68K_TLS_LDO8
1763 ENUMX
1764 BFD_RELOC_68K_TLS_IE32
1765 ENUMX
1766 BFD_RELOC_68K_TLS_IE16
1767 ENUMX
1768 BFD_RELOC_68K_TLS_IE8
1769 ENUMX
1770 BFD_RELOC_68K_TLS_LE32
1771 ENUMX
1772 BFD_RELOC_68K_TLS_LE16
1773 ENUMX
1774 BFD_RELOC_68K_TLS_LE8
1775 ENUMDOC
1776 Relocations used by 68K ELF.
1777
1778 ENUM
1779 BFD_RELOC_32_BASEREL
1780 ENUMX
1781 BFD_RELOC_16_BASEREL
1782 ENUMX
1783 BFD_RELOC_LO16_BASEREL
1784 ENUMX
1785 BFD_RELOC_HI16_BASEREL
1786 ENUMX
1787 BFD_RELOC_HI16_S_BASEREL
1788 ENUMX
1789 BFD_RELOC_8_BASEREL
1790 ENUMX
1791 BFD_RELOC_RVA
1792 ENUMDOC
1793 Linkage-table relative.
1794
1795 ENUM
1796 BFD_RELOC_8_FFnn
1797 ENUMDOC
1798 Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1799
1800 ENUM
1801 BFD_RELOC_32_PCREL_S2
1802 ENUMX
1803 BFD_RELOC_16_PCREL_S2
1804 ENUMX
1805 BFD_RELOC_23_PCREL_S2
1806 ENUMDOC
1807 These PC-relative relocations are stored as word displacements --
1808 i.e., byte displacements shifted right two bits. The 30-bit word
1809 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1810 SPARC. (SPARC tools generally refer to this as <<WDISP30>>.) The
1811 signed 16-bit displacement is used on the MIPS, and the 23-bit
1812 displacement is used on the Alpha.
1813
1814 ENUM
1815 BFD_RELOC_HI22
1816 ENUMX
1817 BFD_RELOC_LO10
1818 ENUMDOC
1819 High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1820 the target word. These are used on the SPARC.
1821
1822 ENUM
1823 BFD_RELOC_GPREL16
1824 ENUMX
1825 BFD_RELOC_GPREL32
1826 ENUMDOC
1827 For systems that allocate a Global Pointer register, these are
1828 displacements off that register. These relocation types are
1829 handled specially, because the value the register will have is
1830 decided relatively late.
1831
1832 ENUM
1833 BFD_RELOC_I960_CALLJ
1834 ENUMDOC
1835 Reloc types used for i960/b.out.
1836
1837 ENUM
1838 BFD_RELOC_NONE
1839 ENUMX
1840 BFD_RELOC_SPARC_WDISP22
1841 ENUMX
1842 BFD_RELOC_SPARC22
1843 ENUMX
1844 BFD_RELOC_SPARC13
1845 ENUMX
1846 BFD_RELOC_SPARC_GOT10
1847 ENUMX
1848 BFD_RELOC_SPARC_GOT13
1849 ENUMX
1850 BFD_RELOC_SPARC_GOT22
1851 ENUMX
1852 BFD_RELOC_SPARC_PC10
1853 ENUMX
1854 BFD_RELOC_SPARC_PC22
1855 ENUMX
1856 BFD_RELOC_SPARC_WPLT30
1857 ENUMX
1858 BFD_RELOC_SPARC_COPY
1859 ENUMX
1860 BFD_RELOC_SPARC_GLOB_DAT
1861 ENUMX
1862 BFD_RELOC_SPARC_JMP_SLOT
1863 ENUMX
1864 BFD_RELOC_SPARC_RELATIVE
1865 ENUMX
1866 BFD_RELOC_SPARC_UA16
1867 ENUMX
1868 BFD_RELOC_SPARC_UA32
1869 ENUMX
1870 BFD_RELOC_SPARC_UA64
1871 ENUMX
1872 BFD_RELOC_SPARC_GOTDATA_HIX22
1873 ENUMX
1874 BFD_RELOC_SPARC_GOTDATA_LOX10
1875 ENUMX
1876 BFD_RELOC_SPARC_GOTDATA_OP_HIX22
1877 ENUMX
1878 BFD_RELOC_SPARC_GOTDATA_OP_LOX10
1879 ENUMX
1880 BFD_RELOC_SPARC_GOTDATA_OP
1881 ENUMX
1882 BFD_RELOC_SPARC_JMP_IREL
1883 ENUMX
1884 BFD_RELOC_SPARC_IRELATIVE
1885 ENUMDOC
1886 SPARC ELF relocations. There is probably some overlap with other
1887 relocation types already defined.
1888
1889 ENUM
1890 BFD_RELOC_SPARC_BASE13
1891 ENUMX
1892 BFD_RELOC_SPARC_BASE22
1893 ENUMDOC
1894 I think these are specific to SPARC a.out (e.g., Sun 4).
1895
1896 ENUMEQ
1897 BFD_RELOC_SPARC_64
1898 BFD_RELOC_64
1899 ENUMX
1900 BFD_RELOC_SPARC_10
1901 ENUMX
1902 BFD_RELOC_SPARC_11
1903 ENUMX
1904 BFD_RELOC_SPARC_OLO10
1905 ENUMX
1906 BFD_RELOC_SPARC_HH22
1907 ENUMX
1908 BFD_RELOC_SPARC_HM10
1909 ENUMX
1910 BFD_RELOC_SPARC_LM22
1911 ENUMX
1912 BFD_RELOC_SPARC_PC_HH22
1913 ENUMX
1914 BFD_RELOC_SPARC_PC_HM10
1915 ENUMX
1916 BFD_RELOC_SPARC_PC_LM22
1917 ENUMX
1918 BFD_RELOC_SPARC_WDISP16
1919 ENUMX
1920 BFD_RELOC_SPARC_WDISP19
1921 ENUMX
1922 BFD_RELOC_SPARC_7
1923 ENUMX
1924 BFD_RELOC_SPARC_6
1925 ENUMX
1926 BFD_RELOC_SPARC_5
1927 ENUMEQX
1928 BFD_RELOC_SPARC_DISP64
1929 BFD_RELOC_64_PCREL
1930 ENUMX
1931 BFD_RELOC_SPARC_PLT32
1932 ENUMX
1933 BFD_RELOC_SPARC_PLT64
1934 ENUMX
1935 BFD_RELOC_SPARC_HIX22
1936 ENUMX
1937 BFD_RELOC_SPARC_LOX10
1938 ENUMX
1939 BFD_RELOC_SPARC_H44
1940 ENUMX
1941 BFD_RELOC_SPARC_M44
1942 ENUMX
1943 BFD_RELOC_SPARC_L44
1944 ENUMX
1945 BFD_RELOC_SPARC_REGISTER
1946 ENUMX
1947 BFD_RELOC_SPARC_H34
1948 ENUMX
1949 BFD_RELOC_SPARC_SIZE32
1950 ENUMX
1951 BFD_RELOC_SPARC_SIZE64
1952 ENUMX
1953 BFD_RELOC_SPARC_WDISP10
1954 ENUMDOC
1955 SPARC64 relocations
1956
1957 ENUM
1958 BFD_RELOC_SPARC_REV32
1959 ENUMDOC
1960 SPARC little endian relocation
1961 ENUM
1962 BFD_RELOC_SPARC_TLS_GD_HI22
1963 ENUMX
1964 BFD_RELOC_SPARC_TLS_GD_LO10
1965 ENUMX
1966 BFD_RELOC_SPARC_TLS_GD_ADD
1967 ENUMX
1968 BFD_RELOC_SPARC_TLS_GD_CALL
1969 ENUMX
1970 BFD_RELOC_SPARC_TLS_LDM_HI22
1971 ENUMX
1972 BFD_RELOC_SPARC_TLS_LDM_LO10
1973 ENUMX
1974 BFD_RELOC_SPARC_TLS_LDM_ADD
1975 ENUMX
1976 BFD_RELOC_SPARC_TLS_LDM_CALL
1977 ENUMX
1978 BFD_RELOC_SPARC_TLS_LDO_HIX22
1979 ENUMX
1980 BFD_RELOC_SPARC_TLS_LDO_LOX10
1981 ENUMX
1982 BFD_RELOC_SPARC_TLS_LDO_ADD
1983 ENUMX
1984 BFD_RELOC_SPARC_TLS_IE_HI22
1985 ENUMX
1986 BFD_RELOC_SPARC_TLS_IE_LO10
1987 ENUMX
1988 BFD_RELOC_SPARC_TLS_IE_LD
1989 ENUMX
1990 BFD_RELOC_SPARC_TLS_IE_LDX
1991 ENUMX
1992 BFD_RELOC_SPARC_TLS_IE_ADD
1993 ENUMX
1994 BFD_RELOC_SPARC_TLS_LE_HIX22
1995 ENUMX
1996 BFD_RELOC_SPARC_TLS_LE_LOX10
1997 ENUMX
1998 BFD_RELOC_SPARC_TLS_DTPMOD32
1999 ENUMX
2000 BFD_RELOC_SPARC_TLS_DTPMOD64
2001 ENUMX
2002 BFD_RELOC_SPARC_TLS_DTPOFF32
2003 ENUMX
2004 BFD_RELOC_SPARC_TLS_DTPOFF64
2005 ENUMX
2006 BFD_RELOC_SPARC_TLS_TPOFF32
2007 ENUMX
2008 BFD_RELOC_SPARC_TLS_TPOFF64
2009 ENUMDOC
2010 SPARC TLS relocations
2011
2012 ENUM
2013 BFD_RELOC_SPU_IMM7
2014 ENUMX
2015 BFD_RELOC_SPU_IMM8
2016 ENUMX
2017 BFD_RELOC_SPU_IMM10
2018 ENUMX
2019 BFD_RELOC_SPU_IMM10W
2020 ENUMX
2021 BFD_RELOC_SPU_IMM16
2022 ENUMX
2023 BFD_RELOC_SPU_IMM16W
2024 ENUMX
2025 BFD_RELOC_SPU_IMM18
2026 ENUMX
2027 BFD_RELOC_SPU_PCREL9a
2028 ENUMX
2029 BFD_RELOC_SPU_PCREL9b
2030 ENUMX
2031 BFD_RELOC_SPU_PCREL16
2032 ENUMX
2033 BFD_RELOC_SPU_LO16
2034 ENUMX
2035 BFD_RELOC_SPU_HI16
2036 ENUMX
2037 BFD_RELOC_SPU_PPU32
2038 ENUMX
2039 BFD_RELOC_SPU_PPU64
2040 ENUMX
2041 BFD_RELOC_SPU_ADD_PIC
2042 ENUMDOC
2043 SPU Relocations.
2044
2045 ENUM
2046 BFD_RELOC_ALPHA_GPDISP_HI16
2047 ENUMDOC
2048 Alpha ECOFF and ELF relocations. Some of these treat the symbol or
2049 "addend" in some special way.
2050 For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
2051 writing; when reading, it will be the absolute section symbol. The
2052 addend is the displacement in bytes of the "lda" instruction from
2053 the "ldah" instruction (which is at the address of this reloc).
2054 ENUM
2055 BFD_RELOC_ALPHA_GPDISP_LO16
2056 ENUMDOC
2057 For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
2058 with GPDISP_HI16 relocs. The addend is ignored when writing the
2059 relocations out, and is filled in with the file's GP value on
2060 reading, for convenience.
2061
2062 ENUM
2063 BFD_RELOC_ALPHA_GPDISP
2064 ENUMDOC
2065 The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
2066 relocation except that there is no accompanying GPDISP_LO16
2067 relocation.
2068
2069 ENUM
2070 BFD_RELOC_ALPHA_LITERAL
2071 ENUMX
2072 BFD_RELOC_ALPHA_ELF_LITERAL
2073 ENUMX
2074 BFD_RELOC_ALPHA_LITUSE
2075 ENUMDOC
2076 The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
2077 the assembler turns it into a LDQ instruction to load the address of
2078 the symbol, and then fills in a register in the real instruction.
2079
2080 The LITERAL reloc, at the LDQ instruction, refers to the .lita
2081 section symbol. The addend is ignored when writing, but is filled
2082 in with the file's GP value on reading, for convenience, as with the
2083 GPDISP_LO16 reloc.
2084
2085 The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2086 It should refer to the symbol to be referenced, as with 16_GOTOFF,
2087 but it generates output not based on the position within the .got
2088 section, but relative to the GP value chosen for the file during the
2089 final link stage.
2090
2091 The LITUSE reloc, on the instruction using the loaded address, gives
2092 information to the linker that it might be able to use to optimize
2093 away some literal section references. The symbol is ignored (read
2094 as the absolute section symbol), and the "addend" indicates the type
2095 of instruction using the register:
2096 1 - "memory" fmt insn
2097 2 - byte-manipulation (byte offset reg)
2098 3 - jsr (target of branch)
2099
2100 ENUM
2101 BFD_RELOC_ALPHA_HINT
2102 ENUMDOC
2103 The HINT relocation indicates a value that should be filled into the
2104 "hint" field of a jmp/jsr/ret instruction, for possible branch-
2105 prediction logic which may be provided on some processors.
2106
2107 ENUM
2108 BFD_RELOC_ALPHA_LINKAGE
2109 ENUMDOC
2110 The LINKAGE relocation outputs a linkage pair in the object file,
2111 which is filled by the linker.
2112
2113 ENUM
2114 BFD_RELOC_ALPHA_CODEADDR
2115 ENUMDOC
2116 The CODEADDR relocation outputs a STO_CA in the object file,
2117 which is filled by the linker.
2118
2119 ENUM
2120 BFD_RELOC_ALPHA_GPREL_HI16
2121 ENUMX
2122 BFD_RELOC_ALPHA_GPREL_LO16
2123 ENUMDOC
2124 The GPREL_HI/LO relocations together form a 32-bit offset from the
2125 GP register.
2126
2127 ENUM
2128 BFD_RELOC_ALPHA_BRSGP
2129 ENUMDOC
2130 Like BFD_RELOC_23_PCREL_S2, except that the source and target must
2131 share a common GP, and the target address is adjusted for
2132 STO_ALPHA_STD_GPLOAD.
2133
2134 ENUM
2135 BFD_RELOC_ALPHA_NOP
2136 ENUMDOC
2137 The NOP relocation outputs a NOP if the longword displacement
2138 between two procedure entry points is < 2^21.
2139
2140 ENUM
2141 BFD_RELOC_ALPHA_BSR
2142 ENUMDOC
2143 The BSR relocation outputs a BSR if the longword displacement
2144 between two procedure entry points is < 2^21.
2145
2146 ENUM
2147 BFD_RELOC_ALPHA_LDA
2148 ENUMDOC
2149 The LDA relocation outputs a LDA if the longword displacement
2150 between two procedure entry points is < 2^16.
2151
2152 ENUM
2153 BFD_RELOC_ALPHA_BOH
2154 ENUMDOC
2155 The BOH relocation outputs a BSR if the longword displacement
2156 between two procedure entry points is < 2^21, or else a hint.
2157
2158 ENUM
2159 BFD_RELOC_ALPHA_TLSGD
2160 ENUMX
2161 BFD_RELOC_ALPHA_TLSLDM
2162 ENUMX
2163 BFD_RELOC_ALPHA_DTPMOD64
2164 ENUMX
2165 BFD_RELOC_ALPHA_GOTDTPREL16
2166 ENUMX
2167 BFD_RELOC_ALPHA_DTPREL64
2168 ENUMX
2169 BFD_RELOC_ALPHA_DTPREL_HI16
2170 ENUMX
2171 BFD_RELOC_ALPHA_DTPREL_LO16
2172 ENUMX
2173 BFD_RELOC_ALPHA_DTPREL16
2174 ENUMX
2175 BFD_RELOC_ALPHA_GOTTPREL16
2176 ENUMX
2177 BFD_RELOC_ALPHA_TPREL64
2178 ENUMX
2179 BFD_RELOC_ALPHA_TPREL_HI16
2180 ENUMX
2181 BFD_RELOC_ALPHA_TPREL_LO16
2182 ENUMX
2183 BFD_RELOC_ALPHA_TPREL16
2184 ENUMDOC
2185 Alpha thread-local storage relocations.
2186
2187 ENUM
2188 BFD_RELOC_MIPS_JMP
2189 ENUMX
2190 BFD_RELOC_MICROMIPS_JMP
2191 ENUMDOC
2192 The MIPS jump instruction.
2193
2194 ENUM
2195 BFD_RELOC_MIPS16_JMP
2196 ENUMDOC
2197 The MIPS16 jump instruction.
2198
2199 ENUM
2200 BFD_RELOC_MIPS16_GPREL
2201 ENUMDOC
2202 MIPS16 GP relative reloc.
2203
2204 ENUM
2205 BFD_RELOC_HI16
2206 ENUMDOC
2207 High 16 bits of 32-bit value; simple reloc.
2208
2209 ENUM
2210 BFD_RELOC_HI16_S
2211 ENUMDOC
2212 High 16 bits of 32-bit value but the low 16 bits will be sign
2213 extended and added to form the final result. If the low 16
2214 bits form a negative number, we need to add one to the high value
2215 to compensate for the borrow when the low bits are added.
2216
2217 ENUM
2218 BFD_RELOC_LO16
2219 ENUMDOC
2220 Low 16 bits.
2221
2222 ENUM
2223 BFD_RELOC_HI16_PCREL
2224 ENUMDOC
2225 High 16 bits of 32-bit pc-relative value
2226 ENUM
2227 BFD_RELOC_HI16_S_PCREL
2228 ENUMDOC
2229 High 16 bits of 32-bit pc-relative value, adjusted
2230 ENUM
2231 BFD_RELOC_LO16_PCREL
2232 ENUMDOC
2233 Low 16 bits of pc-relative value
2234
2235 ENUM
2236 BFD_RELOC_MIPS16_GOT16
2237 ENUMX
2238 BFD_RELOC_MIPS16_CALL16
2239 ENUMDOC
2240 Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
2241 16-bit immediate fields
2242 ENUM
2243 BFD_RELOC_MIPS16_HI16
2244 ENUMDOC
2245 MIPS16 high 16 bits of 32-bit value.
2246 ENUM
2247 BFD_RELOC_MIPS16_HI16_S
2248 ENUMDOC
2249 MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2250 extended and added to form the final result. If the low 16
2251 bits form a negative number, we need to add one to the high value
2252 to compensate for the borrow when the low bits are added.
2253 ENUM
2254 BFD_RELOC_MIPS16_LO16
2255 ENUMDOC
2256 MIPS16 low 16 bits.
2257
2258 ENUM
2259 BFD_RELOC_MIPS16_TLS_GD
2260 ENUMX
2261 BFD_RELOC_MIPS16_TLS_LDM
2262 ENUMX
2263 BFD_RELOC_MIPS16_TLS_DTPREL_HI16
2264 ENUMX
2265 BFD_RELOC_MIPS16_TLS_DTPREL_LO16
2266 ENUMX
2267 BFD_RELOC_MIPS16_TLS_GOTTPREL
2268 ENUMX
2269 BFD_RELOC_MIPS16_TLS_TPREL_HI16
2270 ENUMX
2271 BFD_RELOC_MIPS16_TLS_TPREL_LO16
2272 ENUMDOC
2273 MIPS16 TLS relocations
2274
2275 ENUM
2276 BFD_RELOC_MIPS_LITERAL
2277 ENUMX
2278 BFD_RELOC_MICROMIPS_LITERAL
2279 ENUMDOC
2280 Relocation against a MIPS literal section.
2281
2282 ENUM
2283 BFD_RELOC_MICROMIPS_7_PCREL_S1
2284 ENUMX
2285 BFD_RELOC_MICROMIPS_10_PCREL_S1
2286 ENUMX
2287 BFD_RELOC_MICROMIPS_16_PCREL_S1
2288 ENUMDOC
2289 microMIPS PC-relative relocations.
2290
2291 ENUM
2292 BFD_RELOC_MICROMIPS_GPREL16
2293 ENUMX
2294 BFD_RELOC_MICROMIPS_HI16
2295 ENUMX
2296 BFD_RELOC_MICROMIPS_HI16_S
2297 ENUMX
2298 BFD_RELOC_MICROMIPS_LO16
2299 ENUMDOC
2300 microMIPS versions of generic BFD relocs.
2301
2302 ENUM
2303 BFD_RELOC_MIPS_GOT16
2304 ENUMX
2305 BFD_RELOC_MICROMIPS_GOT16
2306 ENUMX
2307 BFD_RELOC_MIPS_CALL16
2308 ENUMX
2309 BFD_RELOC_MICROMIPS_CALL16
2310 ENUMX
2311 BFD_RELOC_MIPS_GOT_HI16
2312 ENUMX
2313 BFD_RELOC_MICROMIPS_GOT_HI16
2314 ENUMX
2315 BFD_RELOC_MIPS_GOT_LO16
2316 ENUMX
2317 BFD_RELOC_MICROMIPS_GOT_LO16
2318 ENUMX
2319 BFD_RELOC_MIPS_CALL_HI16
2320 ENUMX
2321 BFD_RELOC_MICROMIPS_CALL_HI16
2322 ENUMX
2323 BFD_RELOC_MIPS_CALL_LO16
2324 ENUMX
2325 BFD_RELOC_MICROMIPS_CALL_LO16
2326 ENUMX
2327 BFD_RELOC_MIPS_SUB
2328 ENUMX
2329 BFD_RELOC_MICROMIPS_SUB
2330 ENUMX
2331 BFD_RELOC_MIPS_GOT_PAGE
2332 ENUMX
2333 BFD_RELOC_MICROMIPS_GOT_PAGE
2334 ENUMX
2335 BFD_RELOC_MIPS_GOT_OFST
2336 ENUMX
2337 BFD_RELOC_MICROMIPS_GOT_OFST
2338 ENUMX
2339 BFD_RELOC_MIPS_GOT_DISP
2340 ENUMX
2341 BFD_RELOC_MICROMIPS_GOT_DISP
2342 ENUMX
2343 BFD_RELOC_MIPS_SHIFT5
2344 ENUMX
2345 BFD_RELOC_MIPS_SHIFT6
2346 ENUMX
2347 BFD_RELOC_MIPS_INSERT_A
2348 ENUMX
2349 BFD_RELOC_MIPS_INSERT_B
2350 ENUMX
2351 BFD_RELOC_MIPS_DELETE
2352 ENUMX
2353 BFD_RELOC_MIPS_HIGHEST
2354 ENUMX
2355 BFD_RELOC_MICROMIPS_HIGHEST
2356 ENUMX
2357 BFD_RELOC_MIPS_HIGHER
2358 ENUMX
2359 BFD_RELOC_MICROMIPS_HIGHER
2360 ENUMX
2361 BFD_RELOC_MIPS_SCN_DISP
2362 ENUMX
2363 BFD_RELOC_MICROMIPS_SCN_DISP
2364 ENUMX
2365 BFD_RELOC_MIPS_REL16
2366 ENUMX
2367 BFD_RELOC_MIPS_RELGOT
2368 ENUMX
2369 BFD_RELOC_MIPS_JALR
2370 ENUMX
2371 BFD_RELOC_MICROMIPS_JALR
2372 ENUMX
2373 BFD_RELOC_MIPS_TLS_DTPMOD32
2374 ENUMX
2375 BFD_RELOC_MIPS_TLS_DTPREL32
2376 ENUMX
2377 BFD_RELOC_MIPS_TLS_DTPMOD64
2378 ENUMX
2379 BFD_RELOC_MIPS_TLS_DTPREL64
2380 ENUMX
2381 BFD_RELOC_MIPS_TLS_GD
2382 ENUMX
2383 BFD_RELOC_MICROMIPS_TLS_GD
2384 ENUMX
2385 BFD_RELOC_MIPS_TLS_LDM
2386 ENUMX
2387 BFD_RELOC_MICROMIPS_TLS_LDM
2388 ENUMX
2389 BFD_RELOC_MIPS_TLS_DTPREL_HI16
2390 ENUMX
2391 BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16
2392 ENUMX
2393 BFD_RELOC_MIPS_TLS_DTPREL_LO16
2394 ENUMX
2395 BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16
2396 ENUMX
2397 BFD_RELOC_MIPS_TLS_GOTTPREL
2398 ENUMX
2399 BFD_RELOC_MICROMIPS_TLS_GOTTPREL
2400 ENUMX
2401 BFD_RELOC_MIPS_TLS_TPREL32
2402 ENUMX
2403 BFD_RELOC_MIPS_TLS_TPREL64
2404 ENUMX
2405 BFD_RELOC_MIPS_TLS_TPREL_HI16
2406 ENUMX
2407 BFD_RELOC_MICROMIPS_TLS_TPREL_HI16
2408 ENUMX
2409 BFD_RELOC_MIPS_TLS_TPREL_LO16
2410 ENUMX
2411 BFD_RELOC_MICROMIPS_TLS_TPREL_LO16
2412 ENUMX
2413 BFD_RELOC_MIPS_EH
2414 ENUMDOC
2415 MIPS ELF relocations.
2416 COMMENT
2417
2418 ENUM
2419 BFD_RELOC_MIPS_COPY
2420 ENUMX
2421 BFD_RELOC_MIPS_JUMP_SLOT
2422 ENUMDOC
2423 MIPS ELF relocations (VxWorks and PLT extensions).
2424 COMMENT
2425
2426 ENUM
2427 BFD_RELOC_MOXIE_10_PCREL
2428 ENUMDOC
2429 Moxie ELF relocations.
2430 COMMENT
2431
2432 ENUM
2433 BFD_RELOC_FRV_LABEL16
2434 ENUMX
2435 BFD_RELOC_FRV_LABEL24
2436 ENUMX
2437 BFD_RELOC_FRV_LO16
2438 ENUMX
2439 BFD_RELOC_FRV_HI16
2440 ENUMX
2441 BFD_RELOC_FRV_GPREL12
2442 ENUMX
2443 BFD_RELOC_FRV_GPRELU12
2444 ENUMX
2445 BFD_RELOC_FRV_GPREL32
2446 ENUMX
2447 BFD_RELOC_FRV_GPRELHI
2448 ENUMX
2449 BFD_RELOC_FRV_GPRELLO
2450 ENUMX
2451 BFD_RELOC_FRV_GOT12
2452 ENUMX
2453 BFD_RELOC_FRV_GOTHI
2454 ENUMX
2455 BFD_RELOC_FRV_GOTLO
2456 ENUMX
2457 BFD_RELOC_FRV_FUNCDESC
2458 ENUMX
2459 BFD_RELOC_FRV_FUNCDESC_GOT12
2460 ENUMX
2461 BFD_RELOC_FRV_FUNCDESC_GOTHI
2462 ENUMX
2463 BFD_RELOC_FRV_FUNCDESC_GOTLO
2464 ENUMX
2465 BFD_RELOC_FRV_FUNCDESC_VALUE
2466 ENUMX
2467 BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2468 ENUMX
2469 BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2470 ENUMX
2471 BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2472 ENUMX
2473 BFD_RELOC_FRV_GOTOFF12
2474 ENUMX
2475 BFD_RELOC_FRV_GOTOFFHI
2476 ENUMX
2477 BFD_RELOC_FRV_GOTOFFLO
2478 ENUMX
2479 BFD_RELOC_FRV_GETTLSOFF
2480 ENUMX
2481 BFD_RELOC_FRV_TLSDESC_VALUE
2482 ENUMX
2483 BFD_RELOC_FRV_GOTTLSDESC12
2484 ENUMX
2485 BFD_RELOC_FRV_GOTTLSDESCHI
2486 ENUMX
2487 BFD_RELOC_FRV_GOTTLSDESCLO
2488 ENUMX
2489 BFD_RELOC_FRV_TLSMOFF12
2490 ENUMX
2491 BFD_RELOC_FRV_TLSMOFFHI
2492 ENUMX
2493 BFD_RELOC_FRV_TLSMOFFLO
2494 ENUMX
2495 BFD_RELOC_FRV_GOTTLSOFF12
2496 ENUMX
2497 BFD_RELOC_FRV_GOTTLSOFFHI
2498 ENUMX
2499 BFD_RELOC_FRV_GOTTLSOFFLO
2500 ENUMX
2501 BFD_RELOC_FRV_TLSOFF
2502 ENUMX
2503 BFD_RELOC_FRV_TLSDESC_RELAX
2504 ENUMX
2505 BFD_RELOC_FRV_GETTLSOFF_RELAX
2506 ENUMX
2507 BFD_RELOC_FRV_TLSOFF_RELAX
2508 ENUMX
2509 BFD_RELOC_FRV_TLSMOFF
2510 ENUMDOC
2511 Fujitsu Frv Relocations.
2512 COMMENT
2513
2514 ENUM
2515 BFD_RELOC_MN10300_GOTOFF24
2516 ENUMDOC
2517 This is a 24bit GOT-relative reloc for the mn10300.
2518 ENUM
2519 BFD_RELOC_MN10300_GOT32
2520 ENUMDOC
2521 This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2522 in the instruction.
2523 ENUM
2524 BFD_RELOC_MN10300_GOT24
2525 ENUMDOC
2526 This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2527 in the instruction.
2528 ENUM
2529 BFD_RELOC_MN10300_GOT16
2530 ENUMDOC
2531 This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2532 in the instruction.
2533 ENUM
2534 BFD_RELOC_MN10300_COPY
2535 ENUMDOC
2536 Copy symbol at runtime.
2537 ENUM
2538 BFD_RELOC_MN10300_GLOB_DAT
2539 ENUMDOC
2540 Create GOT entry.
2541 ENUM
2542 BFD_RELOC_MN10300_JMP_SLOT
2543 ENUMDOC
2544 Create PLT entry.
2545 ENUM
2546 BFD_RELOC_MN10300_RELATIVE
2547 ENUMDOC
2548 Adjust by program base.
2549 ENUM
2550 BFD_RELOC_MN10300_SYM_DIFF
2551 ENUMDOC
2552 Together with another reloc targeted at the same location,
2553 allows for a value that is the difference of two symbols
2554 in the same section.
2555 ENUM
2556 BFD_RELOC_MN10300_ALIGN
2557 ENUMDOC
2558 The addend of this reloc is an alignment power that must
2559 be honoured at the offset's location, regardless of linker
2560 relaxation.
2561 ENUM
2562 BFD_RELOC_MN10300_TLS_GD
2563 ENUMX
2564 BFD_RELOC_MN10300_TLS_LD
2565 ENUMX
2566 BFD_RELOC_MN10300_TLS_LDO
2567 ENUMX
2568 BFD_RELOC_MN10300_TLS_GOTIE
2569 ENUMX
2570 BFD_RELOC_MN10300_TLS_IE
2571 ENUMX
2572 BFD_RELOC_MN10300_TLS_LE
2573 ENUMX
2574 BFD_RELOC_MN10300_TLS_DTPMOD
2575 ENUMX
2576 BFD_RELOC_MN10300_TLS_DTPOFF
2577 ENUMX
2578 BFD_RELOC_MN10300_TLS_TPOFF
2579 ENUMDOC
2580 Various TLS-related relocations.
2581 ENUM
2582 BFD_RELOC_MN10300_32_PCREL
2583 ENUMDOC
2584 This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
2585 instruction.
2586 ENUM
2587 BFD_RELOC_MN10300_16_PCREL
2588 ENUMDOC
2589 This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
2590 instruction.
2591 COMMENT
2592
2593 ENUM
2594 BFD_RELOC_386_GOT32
2595 ENUMX
2596 BFD_RELOC_386_PLT32
2597 ENUMX
2598 BFD_RELOC_386_COPY
2599 ENUMX
2600 BFD_RELOC_386_GLOB_DAT
2601 ENUMX
2602 BFD_RELOC_386_JUMP_SLOT
2603 ENUMX
2604 BFD_RELOC_386_RELATIVE
2605 ENUMX
2606 BFD_RELOC_386_GOTOFF
2607 ENUMX
2608 BFD_RELOC_386_GOTPC
2609 ENUMX
2610 BFD_RELOC_386_TLS_TPOFF
2611 ENUMX
2612 BFD_RELOC_386_TLS_IE
2613 ENUMX
2614 BFD_RELOC_386_TLS_GOTIE
2615 ENUMX
2616 BFD_RELOC_386_TLS_LE
2617 ENUMX
2618 BFD_RELOC_386_TLS_GD
2619 ENUMX
2620 BFD_RELOC_386_TLS_LDM
2621 ENUMX
2622 BFD_RELOC_386_TLS_LDO_32
2623 ENUMX
2624 BFD_RELOC_386_TLS_IE_32
2625 ENUMX
2626 BFD_RELOC_386_TLS_LE_32
2627 ENUMX
2628 BFD_RELOC_386_TLS_DTPMOD32
2629 ENUMX
2630 BFD_RELOC_386_TLS_DTPOFF32
2631 ENUMX
2632 BFD_RELOC_386_TLS_TPOFF32
2633 ENUMX
2634 BFD_RELOC_386_TLS_GOTDESC
2635 ENUMX
2636 BFD_RELOC_386_TLS_DESC_CALL
2637 ENUMX
2638 BFD_RELOC_386_TLS_DESC
2639 ENUMX
2640 BFD_RELOC_386_IRELATIVE
2641 ENUMDOC
2642 i386/elf relocations
2643
2644 ENUM
2645 BFD_RELOC_X86_64_GOT32
2646 ENUMX
2647 BFD_RELOC_X86_64_PLT32
2648 ENUMX
2649 BFD_RELOC_X86_64_COPY
2650 ENUMX
2651 BFD_RELOC_X86_64_GLOB_DAT
2652 ENUMX
2653 BFD_RELOC_X86_64_JUMP_SLOT
2654 ENUMX
2655 BFD_RELOC_X86_64_RELATIVE
2656 ENUMX
2657 BFD_RELOC_X86_64_GOTPCREL
2658 ENUMX
2659 BFD_RELOC_X86_64_32S
2660 ENUMX
2661 BFD_RELOC_X86_64_DTPMOD64
2662 ENUMX
2663 BFD_RELOC_X86_64_DTPOFF64
2664 ENUMX
2665 BFD_RELOC_X86_64_TPOFF64
2666 ENUMX
2667 BFD_RELOC_X86_64_TLSGD
2668 ENUMX
2669 BFD_RELOC_X86_64_TLSLD
2670 ENUMX
2671 BFD_RELOC_X86_64_DTPOFF32
2672 ENUMX
2673 BFD_RELOC_X86_64_GOTTPOFF
2674 ENUMX
2675 BFD_RELOC_X86_64_TPOFF32
2676 ENUMX
2677 BFD_RELOC_X86_64_GOTOFF64
2678 ENUMX
2679 BFD_RELOC_X86_64_GOTPC32
2680 ENUMX
2681 BFD_RELOC_X86_64_GOT64
2682 ENUMX
2683 BFD_RELOC_X86_64_GOTPCREL64
2684 ENUMX
2685 BFD_RELOC_X86_64_GOTPC64
2686 ENUMX
2687 BFD_RELOC_X86_64_GOTPLT64
2688 ENUMX
2689 BFD_RELOC_X86_64_PLTOFF64
2690 ENUMX
2691 BFD_RELOC_X86_64_GOTPC32_TLSDESC
2692 ENUMX
2693 BFD_RELOC_X86_64_TLSDESC_CALL
2694 ENUMX
2695 BFD_RELOC_X86_64_TLSDESC
2696 ENUMX
2697 BFD_RELOC_X86_64_IRELATIVE
2698 ENUMX
2699 BFD_RELOC_X86_64_PC32_BND
2700 ENUMX
2701 BFD_RELOC_X86_64_PLT32_BND
2702 ENUMDOC
2703 x86-64/elf relocations
2704
2705 ENUM
2706 BFD_RELOC_NS32K_IMM_8
2707 ENUMX
2708 BFD_RELOC_NS32K_IMM_16
2709 ENUMX
2710 BFD_RELOC_NS32K_IMM_32
2711 ENUMX
2712 BFD_RELOC_NS32K_IMM_8_PCREL
2713 ENUMX
2714 BFD_RELOC_NS32K_IMM_16_PCREL
2715 ENUMX
2716 BFD_RELOC_NS32K_IMM_32_PCREL
2717 ENUMX
2718 BFD_RELOC_NS32K_DISP_8
2719 ENUMX
2720 BFD_RELOC_NS32K_DISP_16
2721 ENUMX
2722 BFD_RELOC_NS32K_DISP_32
2723 ENUMX
2724 BFD_RELOC_NS32K_DISP_8_PCREL
2725 ENUMX
2726 BFD_RELOC_NS32K_DISP_16_PCREL
2727 ENUMX
2728 BFD_RELOC_NS32K_DISP_32_PCREL
2729 ENUMDOC
2730 ns32k relocations
2731
2732 ENUM
2733 BFD_RELOC_PDP11_DISP_8_PCREL
2734 ENUMX
2735 BFD_RELOC_PDP11_DISP_6_PCREL
2736 ENUMDOC
2737 PDP11 relocations
2738
2739 ENUM
2740 BFD_RELOC_PJ_CODE_HI16
2741 ENUMX
2742 BFD_RELOC_PJ_CODE_LO16
2743 ENUMX
2744 BFD_RELOC_PJ_CODE_DIR16
2745 ENUMX
2746 BFD_RELOC_PJ_CODE_DIR32
2747 ENUMX
2748 BFD_RELOC_PJ_CODE_REL16
2749 ENUMX
2750 BFD_RELOC_PJ_CODE_REL32
2751 ENUMDOC
2752 Picojava relocs. Not all of these appear in object files.
2753
2754 ENUM
2755 BFD_RELOC_PPC_B26
2756 ENUMX
2757 BFD_RELOC_PPC_BA26
2758 ENUMX
2759 BFD_RELOC_PPC_TOC16
2760 ENUMX
2761 BFD_RELOC_PPC_B16
2762 ENUMX
2763 BFD_RELOC_PPC_B16_BRTAKEN
2764 ENUMX
2765 BFD_RELOC_PPC_B16_BRNTAKEN
2766 ENUMX
2767 BFD_RELOC_PPC_BA16
2768 ENUMX
2769 BFD_RELOC_PPC_BA16_BRTAKEN
2770 ENUMX
2771 BFD_RELOC_PPC_BA16_BRNTAKEN
2772 ENUMX
2773 BFD_RELOC_PPC_COPY
2774 ENUMX
2775 BFD_RELOC_PPC_GLOB_DAT
2776 ENUMX
2777 BFD_RELOC_PPC_JMP_SLOT
2778 ENUMX
2779 BFD_RELOC_PPC_RELATIVE
2780 ENUMX
2781 BFD_RELOC_PPC_LOCAL24PC
2782 ENUMX
2783 BFD_RELOC_PPC_EMB_NADDR32
2784 ENUMX
2785 BFD_RELOC_PPC_EMB_NADDR16
2786 ENUMX
2787 BFD_RELOC_PPC_EMB_NADDR16_LO
2788 ENUMX
2789 BFD_RELOC_PPC_EMB_NADDR16_HI
2790 ENUMX
2791 BFD_RELOC_PPC_EMB_NADDR16_HA
2792 ENUMX
2793 BFD_RELOC_PPC_EMB_SDAI16
2794 ENUMX
2795 BFD_RELOC_PPC_EMB_SDA2I16
2796 ENUMX
2797 BFD_RELOC_PPC_EMB_SDA2REL
2798 ENUMX
2799 BFD_RELOC_PPC_EMB_SDA21
2800 ENUMX
2801 BFD_RELOC_PPC_EMB_MRKREF
2802 ENUMX
2803 BFD_RELOC_PPC_EMB_RELSEC16
2804 ENUMX
2805 BFD_RELOC_PPC_EMB_RELST_LO
2806 ENUMX
2807 BFD_RELOC_PPC_EMB_RELST_HI
2808 ENUMX
2809 BFD_RELOC_PPC_EMB_RELST_HA
2810 ENUMX
2811 BFD_RELOC_PPC_EMB_BIT_FLD
2812 ENUMX
2813 BFD_RELOC_PPC_EMB_RELSDA
2814 ENUMX
2815 BFD_RELOC_PPC_VLE_REL8
2816 ENUMX
2817 BFD_RELOC_PPC_VLE_REL15
2818 ENUMX
2819 BFD_RELOC_PPC_VLE_REL24
2820 ENUMX
2821 BFD_RELOC_PPC_VLE_LO16A
2822 ENUMX
2823 BFD_RELOC_PPC_VLE_LO16D
2824 ENUMX
2825 BFD_RELOC_PPC_VLE_HI16A
2826 ENUMX
2827 BFD_RELOC_PPC_VLE_HI16D
2828 ENUMX
2829 BFD_RELOC_PPC_VLE_HA16A
2830 ENUMX
2831 BFD_RELOC_PPC_VLE_HA16D
2832 ENUMX
2833 BFD_RELOC_PPC_VLE_SDA21
2834 ENUMX
2835 BFD_RELOC_PPC_VLE_SDA21_LO
2836 ENUMX
2837 BFD_RELOC_PPC_VLE_SDAREL_LO16A
2838 ENUMX
2839 BFD_RELOC_PPC_VLE_SDAREL_LO16D
2840 ENUMX
2841 BFD_RELOC_PPC_VLE_SDAREL_HI16A
2842 ENUMX
2843 BFD_RELOC_PPC_VLE_SDAREL_HI16D
2844 ENUMX
2845 BFD_RELOC_PPC_VLE_SDAREL_HA16A
2846 ENUMX
2847 BFD_RELOC_PPC_VLE_SDAREL_HA16D
2848 ENUMX
2849 BFD_RELOC_PPC64_HIGHER
2850 ENUMX
2851 BFD_RELOC_PPC64_HIGHER_S
2852 ENUMX
2853 BFD_RELOC_PPC64_HIGHEST
2854 ENUMX
2855 BFD_RELOC_PPC64_HIGHEST_S
2856 ENUMX
2857 BFD_RELOC_PPC64_TOC16_LO
2858 ENUMX
2859 BFD_RELOC_PPC64_TOC16_HI
2860 ENUMX
2861 BFD_RELOC_PPC64_TOC16_HA
2862 ENUMX
2863 BFD_RELOC_PPC64_TOC
2864 ENUMX
2865 BFD_RELOC_PPC64_PLTGOT16
2866 ENUMX
2867 BFD_RELOC_PPC64_PLTGOT16_LO
2868 ENUMX
2869 BFD_RELOC_PPC64_PLTGOT16_HI
2870 ENUMX
2871 BFD_RELOC_PPC64_PLTGOT16_HA
2872 ENUMX
2873 BFD_RELOC_PPC64_ADDR16_DS
2874 ENUMX
2875 BFD_RELOC_PPC64_ADDR16_LO_DS
2876 ENUMX
2877 BFD_RELOC_PPC64_GOT16_DS
2878 ENUMX
2879 BFD_RELOC_PPC64_GOT16_LO_DS
2880 ENUMX
2881 BFD_RELOC_PPC64_PLT16_LO_DS
2882 ENUMX
2883 BFD_RELOC_PPC64_SECTOFF_DS
2884 ENUMX
2885 BFD_RELOC_PPC64_SECTOFF_LO_DS
2886 ENUMX
2887 BFD_RELOC_PPC64_TOC16_DS
2888 ENUMX
2889 BFD_RELOC_PPC64_TOC16_LO_DS
2890 ENUMX
2891 BFD_RELOC_PPC64_PLTGOT16_DS
2892 ENUMX
2893 BFD_RELOC_PPC64_PLTGOT16_LO_DS
2894 ENUMX
2895 BFD_RELOC_PPC64_ADDR16_HIGH
2896 ENUMX
2897 BFD_RELOC_PPC64_ADDR16_HIGHA
2898 ENUMX
2899 BFD_RELOC_PPC64_ADDR64_LOCAL
2900 ENUMDOC
2901 Power(rs6000) and PowerPC relocations.
2902
2903 ENUM
2904 BFD_RELOC_PPC_TLS
2905 ENUMX
2906 BFD_RELOC_PPC_TLSGD
2907 ENUMX
2908 BFD_RELOC_PPC_TLSLD
2909 ENUMX
2910 BFD_RELOC_PPC_DTPMOD
2911 ENUMX
2912 BFD_RELOC_PPC_TPREL16
2913 ENUMX
2914 BFD_RELOC_PPC_TPREL16_LO
2915 ENUMX
2916 BFD_RELOC_PPC_TPREL16_HI
2917 ENUMX
2918 BFD_RELOC_PPC_TPREL16_HA
2919 ENUMX
2920 BFD_RELOC_PPC_TPREL
2921 ENUMX
2922 BFD_RELOC_PPC_DTPREL16
2923 ENUMX
2924 BFD_RELOC_PPC_DTPREL16_LO
2925 ENUMX
2926 BFD_RELOC_PPC_DTPREL16_HI
2927 ENUMX
2928 BFD_RELOC_PPC_DTPREL16_HA
2929 ENUMX
2930 BFD_RELOC_PPC_DTPREL
2931 ENUMX
2932 BFD_RELOC_PPC_GOT_TLSGD16
2933 ENUMX
2934 BFD_RELOC_PPC_GOT_TLSGD16_LO
2935 ENUMX
2936 BFD_RELOC_PPC_GOT_TLSGD16_HI
2937 ENUMX
2938 BFD_RELOC_PPC_GOT_TLSGD16_HA
2939 ENUMX
2940 BFD_RELOC_PPC_GOT_TLSLD16
2941 ENUMX
2942 BFD_RELOC_PPC_GOT_TLSLD16_LO
2943 ENUMX
2944 BFD_RELOC_PPC_GOT_TLSLD16_HI
2945 ENUMX
2946 BFD_RELOC_PPC_GOT_TLSLD16_HA
2947 ENUMX
2948 BFD_RELOC_PPC_GOT_TPREL16
2949 ENUMX
2950 BFD_RELOC_PPC_GOT_TPREL16_LO
2951 ENUMX
2952 BFD_RELOC_PPC_GOT_TPREL16_HI
2953 ENUMX
2954 BFD_RELOC_PPC_GOT_TPREL16_HA
2955 ENUMX
2956 BFD_RELOC_PPC_GOT_DTPREL16
2957 ENUMX
2958 BFD_RELOC_PPC_GOT_DTPREL16_LO
2959 ENUMX
2960 BFD_RELOC_PPC_GOT_DTPREL16_HI
2961 ENUMX
2962 BFD_RELOC_PPC_GOT_DTPREL16_HA
2963 ENUMX
2964 BFD_RELOC_PPC64_TPREL16_DS
2965 ENUMX
2966 BFD_RELOC_PPC64_TPREL16_LO_DS
2967 ENUMX
2968 BFD_RELOC_PPC64_TPREL16_HIGHER
2969 ENUMX
2970 BFD_RELOC_PPC64_TPREL16_HIGHERA
2971 ENUMX
2972 BFD_RELOC_PPC64_TPREL16_HIGHEST
2973 ENUMX
2974 BFD_RELOC_PPC64_TPREL16_HIGHESTA
2975 ENUMX
2976 BFD_RELOC_PPC64_DTPREL16_DS
2977 ENUMX
2978 BFD_RELOC_PPC64_DTPREL16_LO_DS
2979 ENUMX
2980 BFD_RELOC_PPC64_DTPREL16_HIGHER
2981 ENUMX
2982 BFD_RELOC_PPC64_DTPREL16_HIGHERA
2983 ENUMX
2984 BFD_RELOC_PPC64_DTPREL16_HIGHEST
2985 ENUMX
2986 BFD_RELOC_PPC64_DTPREL16_HIGHESTA
2987 ENUMX
2988 BFD_RELOC_PPC64_TPREL16_HIGH
2989 ENUMX
2990 BFD_RELOC_PPC64_TPREL16_HIGHA
2991 ENUMX
2992 BFD_RELOC_PPC64_DTPREL16_HIGH
2993 ENUMX
2994 BFD_RELOC_PPC64_DTPREL16_HIGHA
2995 ENUMDOC
2996 PowerPC and PowerPC64 thread-local storage relocations.
2997
2998 ENUM
2999 BFD_RELOC_I370_D12
3000 ENUMDOC
3001 IBM 370/390 relocations
3002
3003 ENUM
3004 BFD_RELOC_CTOR
3005 ENUMDOC
3006 The type of reloc used to build a constructor table - at the moment
3007 probably a 32 bit wide absolute relocation, but the target can choose.
3008 It generally does map to one of the other relocation types.
3009
3010 ENUM
3011 BFD_RELOC_ARM_PCREL_BRANCH
3012 ENUMDOC
3013 ARM 26 bit pc-relative branch. The lowest two bits must be zero and are
3014 not stored in the instruction.
3015 ENUM
3016 BFD_RELOC_ARM_PCREL_BLX
3017 ENUMDOC
3018 ARM 26 bit pc-relative branch. The lowest bit must be zero and is
3019 not stored in the instruction. The 2nd lowest bit comes from a 1 bit
3020 field in the instruction.
3021 ENUM
3022 BFD_RELOC_THUMB_PCREL_BLX
3023 ENUMDOC
3024 Thumb 22 bit pc-relative branch. The lowest bit must be zero and is
3025 not stored in the instruction. The 2nd lowest bit comes from a 1 bit
3026 field in the instruction.
3027 ENUM
3028 BFD_RELOC_ARM_PCREL_CALL
3029 ENUMDOC
3030 ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
3031 ENUM
3032 BFD_RELOC_ARM_PCREL_JUMP
3033 ENUMDOC
3034 ARM 26-bit pc-relative branch for B or conditional BL instruction.
3035
3036 ENUM
3037 BFD_RELOC_THUMB_PCREL_BRANCH7
3038 ENUMX
3039 BFD_RELOC_THUMB_PCREL_BRANCH9
3040 ENUMX
3041 BFD_RELOC_THUMB_PCREL_BRANCH12
3042 ENUMX
3043 BFD_RELOC_THUMB_PCREL_BRANCH20
3044 ENUMX
3045 BFD_RELOC_THUMB_PCREL_BRANCH23
3046 ENUMX
3047 BFD_RELOC_THUMB_PCREL_BRANCH25
3048 ENUMDOC
3049 Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
3050 The lowest bit must be zero and is not stored in the instruction.
3051 Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
3052 "nn" one smaller in all cases. Note further that BRANCH23
3053 corresponds to R_ARM_THM_CALL.
3054
3055 ENUM
3056 BFD_RELOC_ARM_OFFSET_IMM
3057 ENUMDOC
3058 12-bit immediate offset, used in ARM-format ldr and str instructions.
3059
3060 ENUM
3061 BFD_RELOC_ARM_THUMB_OFFSET
3062 ENUMDOC
3063 5-bit immediate offset, used in Thumb-format ldr and str instructions.
3064
3065 ENUM
3066 BFD_RELOC_ARM_TARGET1
3067 ENUMDOC
3068 Pc-relative or absolute relocation depending on target. Used for
3069 entries in .init_array sections.
3070 ENUM
3071 BFD_RELOC_ARM_ROSEGREL32
3072 ENUMDOC
3073 Read-only segment base relative address.
3074 ENUM
3075 BFD_RELOC_ARM_SBREL32
3076 ENUMDOC
3077 Data segment base relative address.
3078 ENUM
3079 BFD_RELOC_ARM_TARGET2
3080 ENUMDOC
3081 This reloc is used for references to RTTI data from exception handling
3082 tables. The actual definition depends on the target. It may be a
3083 pc-relative or some form of GOT-indirect relocation.
3084 ENUM
3085 BFD_RELOC_ARM_PREL31
3086 ENUMDOC
3087 31-bit PC relative address.
3088 ENUM
3089 BFD_RELOC_ARM_MOVW
3090 ENUMX
3091 BFD_RELOC_ARM_MOVT
3092 ENUMX
3093 BFD_RELOC_ARM_MOVW_PCREL
3094 ENUMX
3095 BFD_RELOC_ARM_MOVT_PCREL
3096 ENUMX
3097 BFD_RELOC_ARM_THUMB_MOVW
3098 ENUMX
3099 BFD_RELOC_ARM_THUMB_MOVT
3100 ENUMX
3101 BFD_RELOC_ARM_THUMB_MOVW_PCREL
3102 ENUMX
3103 BFD_RELOC_ARM_THUMB_MOVT_PCREL
3104 ENUMDOC
3105 Low and High halfword relocations for MOVW and MOVT instructions.
3106
3107 ENUM
3108 BFD_RELOC_ARM_JUMP_SLOT
3109 ENUMX
3110 BFD_RELOC_ARM_GLOB_DAT
3111 ENUMX
3112 BFD_RELOC_ARM_GOT32
3113 ENUMX
3114 BFD_RELOC_ARM_PLT32
3115 ENUMX
3116 BFD_RELOC_ARM_RELATIVE
3117 ENUMX
3118 BFD_RELOC_ARM_GOTOFF
3119 ENUMX
3120 BFD_RELOC_ARM_GOTPC
3121 ENUMX
3122 BFD_RELOC_ARM_GOT_PREL
3123 ENUMDOC
3124 Relocations for setting up GOTs and PLTs for shared libraries.
3125
3126 ENUM
3127 BFD_RELOC_ARM_TLS_GD32
3128 ENUMX
3129 BFD_RELOC_ARM_TLS_LDO32
3130 ENUMX
3131 BFD_RELOC_ARM_TLS_LDM32
3132 ENUMX
3133 BFD_RELOC_ARM_TLS_DTPOFF32
3134 ENUMX
3135 BFD_RELOC_ARM_TLS_DTPMOD32
3136 ENUMX
3137 BFD_RELOC_ARM_TLS_TPOFF32
3138 ENUMX
3139 BFD_RELOC_ARM_TLS_IE32
3140 ENUMX
3141 BFD_RELOC_ARM_TLS_LE32
3142 ENUMX
3143 BFD_RELOC_ARM_TLS_GOTDESC
3144 ENUMX
3145 BFD_RELOC_ARM_TLS_CALL
3146 ENUMX
3147 BFD_RELOC_ARM_THM_TLS_CALL
3148 ENUMX
3149 BFD_RELOC_ARM_TLS_DESCSEQ
3150 ENUMX
3151 BFD_RELOC_ARM_THM_TLS_DESCSEQ
3152 ENUMX
3153 BFD_RELOC_ARM_TLS_DESC
3154 ENUMDOC
3155 ARM thread-local storage relocations.
3156
3157 ENUM
3158 BFD_RELOC_ARM_ALU_PC_G0_NC
3159 ENUMX
3160 BFD_RELOC_ARM_ALU_PC_G0
3161 ENUMX
3162 BFD_RELOC_ARM_ALU_PC_G1_NC
3163 ENUMX
3164 BFD_RELOC_ARM_ALU_PC_G1
3165 ENUMX
3166 BFD_RELOC_ARM_ALU_PC_G2
3167 ENUMX
3168 BFD_RELOC_ARM_LDR_PC_G0
3169 ENUMX
3170 BFD_RELOC_ARM_LDR_PC_G1
3171 ENUMX
3172 BFD_RELOC_ARM_LDR_PC_G2
3173 ENUMX
3174 BFD_RELOC_ARM_LDRS_PC_G0
3175 ENUMX
3176 BFD_RELOC_ARM_LDRS_PC_G1
3177 ENUMX
3178 BFD_RELOC_ARM_LDRS_PC_G2
3179 ENUMX
3180 BFD_RELOC_ARM_LDC_PC_G0
3181 ENUMX
3182 BFD_RELOC_ARM_LDC_PC_G1
3183 ENUMX
3184 BFD_RELOC_ARM_LDC_PC_G2
3185 ENUMX
3186 BFD_RELOC_ARM_ALU_SB_G0_NC
3187 ENUMX
3188 BFD_RELOC_ARM_ALU_SB_G0
3189 ENUMX
3190 BFD_RELOC_ARM_ALU_SB_G1_NC
3191 ENUMX
3192 BFD_RELOC_ARM_ALU_SB_G1
3193 ENUMX
3194 BFD_RELOC_ARM_ALU_SB_G2
3195 ENUMX
3196 BFD_RELOC_ARM_LDR_SB_G0
3197 ENUMX
3198 BFD_RELOC_ARM_LDR_SB_G1
3199 ENUMX
3200 BFD_RELOC_ARM_LDR_SB_G2
3201 ENUMX
3202 BFD_RELOC_ARM_LDRS_SB_G0
3203 ENUMX
3204 BFD_RELOC_ARM_LDRS_SB_G1
3205 ENUMX
3206 BFD_RELOC_ARM_LDRS_SB_G2
3207 ENUMX
3208 BFD_RELOC_ARM_LDC_SB_G0
3209 ENUMX
3210 BFD_RELOC_ARM_LDC_SB_G1
3211 ENUMX
3212 BFD_RELOC_ARM_LDC_SB_G2
3213 ENUMDOC
3214 ARM group relocations.
3215
3216 ENUM
3217 BFD_RELOC_ARM_V4BX
3218 ENUMDOC
3219 Annotation of BX instructions.
3220
3221 ENUM
3222 BFD_RELOC_ARM_IRELATIVE
3223 ENUMDOC
3224 ARM support for STT_GNU_IFUNC.
3225
3226 ENUM
3227 BFD_RELOC_ARM_IMMEDIATE
3228 ENUMX
3229 BFD_RELOC_ARM_ADRL_IMMEDIATE
3230 ENUMX
3231 BFD_RELOC_ARM_T32_IMMEDIATE
3232 ENUMX
3233 BFD_RELOC_ARM_T32_ADD_IMM
3234 ENUMX
3235 BFD_RELOC_ARM_T32_IMM12
3236 ENUMX
3237 BFD_RELOC_ARM_T32_ADD_PC12
3238 ENUMX
3239 BFD_RELOC_ARM_SHIFT_IMM
3240 ENUMX
3241 BFD_RELOC_ARM_SMC
3242 ENUMX
3243 BFD_RELOC_ARM_HVC
3244 ENUMX
3245 BFD_RELOC_ARM_SWI
3246 ENUMX
3247 BFD_RELOC_ARM_MULTI
3248 ENUMX
3249 BFD_RELOC_ARM_CP_OFF_IMM
3250 ENUMX
3251 BFD_RELOC_ARM_CP_OFF_IMM_S2
3252 ENUMX
3253 BFD_RELOC_ARM_T32_CP_OFF_IMM
3254 ENUMX
3255 BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
3256 ENUMX
3257 BFD_RELOC_ARM_ADR_IMM
3258 ENUMX
3259 BFD_RELOC_ARM_LDR_IMM
3260 ENUMX
3261 BFD_RELOC_ARM_LITERAL
3262 ENUMX
3263 BFD_RELOC_ARM_IN_POOL
3264 ENUMX
3265 BFD_RELOC_ARM_OFFSET_IMM8
3266 ENUMX
3267 BFD_RELOC_ARM_T32_OFFSET_U8
3268 ENUMX
3269 BFD_RELOC_ARM_T32_OFFSET_IMM
3270 ENUMX
3271 BFD_RELOC_ARM_HWLITERAL
3272 ENUMX
3273 BFD_RELOC_ARM_THUMB_ADD
3274 ENUMX
3275 BFD_RELOC_ARM_THUMB_IMM
3276 ENUMX
3277 BFD_RELOC_ARM_THUMB_SHIFT
3278 ENUMDOC
3279 These relocs are only used within the ARM assembler. They are not
3280 (at present) written to any object files.
3281
3282 ENUM
3283 BFD_RELOC_SH_PCDISP8BY2
3284 ENUMX
3285 BFD_RELOC_SH_PCDISP12BY2
3286 ENUMX
3287 BFD_RELOC_SH_IMM3
3288 ENUMX
3289 BFD_RELOC_SH_IMM3U
3290 ENUMX
3291 BFD_RELOC_SH_DISP12
3292 ENUMX
3293 BFD_RELOC_SH_DISP12BY2
3294 ENUMX
3295 BFD_RELOC_SH_DISP12BY4
3296 ENUMX
3297 BFD_RELOC_SH_DISP12BY8
3298 ENUMX
3299 BFD_RELOC_SH_DISP20
3300 ENUMX
3301 BFD_RELOC_SH_DISP20BY8
3302 ENUMX
3303 BFD_RELOC_SH_IMM4
3304 ENUMX
3305 BFD_RELOC_SH_IMM4BY2
3306 ENUMX
3307 BFD_RELOC_SH_IMM4BY4
3308 ENUMX
3309 BFD_RELOC_SH_IMM8
3310 ENUMX
3311 BFD_RELOC_SH_IMM8BY2
3312 ENUMX
3313 BFD_RELOC_SH_IMM8BY4
3314 ENUMX
3315 BFD_RELOC_SH_PCRELIMM8BY2
3316 ENUMX
3317 BFD_RELOC_SH_PCRELIMM8BY4
3318 ENUMX
3319 BFD_RELOC_SH_SWITCH16
3320 ENUMX
3321 BFD_RELOC_SH_SWITCH32
3322 ENUMX
3323 BFD_RELOC_SH_USES
3324 ENUMX
3325 BFD_RELOC_SH_COUNT
3326 ENUMX
3327 BFD_RELOC_SH_ALIGN
3328 ENUMX
3329 BFD_RELOC_SH_CODE
3330 ENUMX
3331 BFD_RELOC_SH_DATA
3332 ENUMX
3333 BFD_RELOC_SH_LABEL
3334 ENUMX
3335 BFD_RELOC_SH_LOOP_START
3336 ENUMX
3337 BFD_RELOC_SH_LOOP_END
3338 ENUMX
3339 BFD_RELOC_SH_COPY
3340 ENUMX
3341 BFD_RELOC_SH_GLOB_DAT
3342 ENUMX
3343 BFD_RELOC_SH_JMP_SLOT
3344 ENUMX
3345 BFD_RELOC_SH_RELATIVE
3346 ENUMX
3347 BFD_RELOC_SH_GOTPC
3348 ENUMX
3349 BFD_RELOC_SH_GOT_LOW16
3350 ENUMX
3351 BFD_RELOC_SH_GOT_MEDLOW16
3352 ENUMX
3353 BFD_RELOC_SH_GOT_MEDHI16
3354 ENUMX
3355 BFD_RELOC_SH_GOT_HI16
3356 ENUMX
3357 BFD_RELOC_SH_GOTPLT_LOW16
3358 ENUMX
3359 BFD_RELOC_SH_GOTPLT_MEDLOW16
3360 ENUMX
3361 BFD_RELOC_SH_GOTPLT_MEDHI16
3362 ENUMX
3363 BFD_RELOC_SH_GOTPLT_HI16
3364 ENUMX
3365 BFD_RELOC_SH_PLT_LOW16
3366 ENUMX
3367 BFD_RELOC_SH_PLT_MEDLOW16
3368 ENUMX
3369 BFD_RELOC_SH_PLT_MEDHI16
3370 ENUMX
3371 BFD_RELOC_SH_PLT_HI16
3372 ENUMX
3373 BFD_RELOC_SH_GOTOFF_LOW16
3374 ENUMX
3375 BFD_RELOC_SH_GOTOFF_MEDLOW16
3376 ENUMX
3377 BFD_RELOC_SH_GOTOFF_MEDHI16
3378 ENUMX
3379 BFD_RELOC_SH_GOTOFF_HI16
3380 ENUMX
3381 BFD_RELOC_SH_GOTPC_LOW16
3382 ENUMX
3383 BFD_RELOC_SH_GOTPC_MEDLOW16
3384 ENUMX
3385 BFD_RELOC_SH_GOTPC_MEDHI16
3386 ENUMX
3387 BFD_RELOC_SH_GOTPC_HI16
3388 ENUMX
3389 BFD_RELOC_SH_COPY64
3390 ENUMX
3391 BFD_RELOC_SH_GLOB_DAT64
3392 ENUMX
3393 BFD_RELOC_SH_JMP_SLOT64
3394 ENUMX
3395 BFD_RELOC_SH_RELATIVE64
3396 ENUMX
3397 BFD_RELOC_SH_GOT10BY4
3398 ENUMX
3399 BFD_RELOC_SH_GOT10BY8
3400 ENUMX
3401 BFD_RELOC_SH_GOTPLT10BY4
3402 ENUMX
3403 BFD_RELOC_SH_GOTPLT10BY8
3404 ENUMX
3405 BFD_RELOC_SH_GOTPLT32
3406 ENUMX
3407 BFD_RELOC_SH_SHMEDIA_CODE
3408 ENUMX
3409 BFD_RELOC_SH_IMMU5
3410 ENUMX
3411 BFD_RELOC_SH_IMMS6
3412 ENUMX
3413 BFD_RELOC_SH_IMMS6BY32
3414 ENUMX
3415 BFD_RELOC_SH_IMMU6
3416 ENUMX
3417 BFD_RELOC_SH_IMMS10
3418 ENUMX
3419 BFD_RELOC_SH_IMMS10BY2
3420 ENUMX
3421 BFD_RELOC_SH_IMMS10BY4
3422 ENUMX
3423 BFD_RELOC_SH_IMMS10BY8
3424 ENUMX
3425 BFD_RELOC_SH_IMMS16
3426 ENUMX
3427 BFD_RELOC_SH_IMMU16
3428 ENUMX
3429 BFD_RELOC_SH_IMM_LOW16
3430 ENUMX
3431 BFD_RELOC_SH_IMM_LOW16_PCREL
3432 ENUMX
3433 BFD_RELOC_SH_IMM_MEDLOW16
3434 ENUMX
3435 BFD_RELOC_SH_IMM_MEDLOW16_PCREL
3436 ENUMX
3437 BFD_RELOC_SH_IMM_MEDHI16
3438 ENUMX
3439 BFD_RELOC_SH_IMM_MEDHI16_PCREL
3440 ENUMX
3441 BFD_RELOC_SH_IMM_HI16
3442 ENUMX
3443 BFD_RELOC_SH_IMM_HI16_PCREL
3444 ENUMX
3445 BFD_RELOC_SH_PT_16
3446 ENUMX
3447 BFD_RELOC_SH_TLS_GD_32
3448 ENUMX
3449 BFD_RELOC_SH_TLS_LD_32
3450 ENUMX
3451 BFD_RELOC_SH_TLS_LDO_32
3452 ENUMX
3453 BFD_RELOC_SH_TLS_IE_32
3454 ENUMX
3455 BFD_RELOC_SH_TLS_LE_32
3456 ENUMX
3457 BFD_RELOC_SH_TLS_DTPMOD32
3458 ENUMX
3459 BFD_RELOC_SH_TLS_DTPOFF32
3460 ENUMX
3461 BFD_RELOC_SH_TLS_TPOFF32
3462 ENUMX
3463 BFD_RELOC_SH_GOT20
3464 ENUMX
3465 BFD_RELOC_SH_GOTOFF20
3466 ENUMX
3467 BFD_RELOC_SH_GOTFUNCDESC
3468 ENUMX
3469 BFD_RELOC_SH_GOTFUNCDESC20
3470 ENUMX
3471 BFD_RELOC_SH_GOTOFFFUNCDESC
3472 ENUMX
3473 BFD_RELOC_SH_GOTOFFFUNCDESC20
3474 ENUMX
3475 BFD_RELOC_SH_FUNCDESC
3476 ENUMDOC
3477 Renesas / SuperH SH relocs. Not all of these appear in object files.
3478
3479 ENUM
3480 BFD_RELOC_ARC_B22_PCREL
3481 ENUMDOC
3482 ARC Cores relocs.
3483 ARC 22 bit pc-relative branch. The lowest two bits must be zero and are
3484 not stored in the instruction. The high 20 bits are installed in bits 26
3485 through 7 of the instruction.
3486 ENUM
3487 BFD_RELOC_ARC_B26
3488 ENUMDOC
3489 ARC 26 bit absolute branch. The lowest two bits must be zero and are not
3490 stored in the instruction. The high 24 bits are installed in bits 23
3491 through 0.
3492
3493 ENUM
3494 BFD_RELOC_BFIN_16_IMM
3495 ENUMDOC
3496 ADI Blackfin 16 bit immediate absolute reloc.
3497 ENUM
3498 BFD_RELOC_BFIN_16_HIGH
3499 ENUMDOC
3500 ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3501 ENUM
3502 BFD_RELOC_BFIN_4_PCREL
3503 ENUMDOC
3504 ADI Blackfin 'a' part of LSETUP.
3505 ENUM
3506 BFD_RELOC_BFIN_5_PCREL
3507 ENUMDOC
3508 ADI Blackfin.
3509 ENUM
3510 BFD_RELOC_BFIN_16_LOW
3511 ENUMDOC
3512 ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3513 ENUM
3514 BFD_RELOC_BFIN_10_PCREL
3515 ENUMDOC
3516 ADI Blackfin.
3517 ENUM
3518 BFD_RELOC_BFIN_11_PCREL
3519 ENUMDOC
3520 ADI Blackfin 'b' part of LSETUP.
3521 ENUM
3522 BFD_RELOC_BFIN_12_PCREL_JUMP
3523 ENUMDOC
3524 ADI Blackfin.
3525 ENUM
3526 BFD_RELOC_BFIN_12_PCREL_JUMP_S
3527 ENUMDOC
3528 ADI Blackfin Short jump, pcrel.
3529 ENUM
3530 BFD_RELOC_BFIN_24_PCREL_CALL_X
3531 ENUMDOC
3532 ADI Blackfin Call.x not implemented.
3533 ENUM
3534 BFD_RELOC_BFIN_24_PCREL_JUMP_L
3535 ENUMDOC
3536 ADI Blackfin Long Jump pcrel.
3537 ENUM
3538 BFD_RELOC_BFIN_GOT17M4
3539 ENUMX
3540 BFD_RELOC_BFIN_GOTHI
3541 ENUMX
3542 BFD_RELOC_BFIN_GOTLO
3543 ENUMX
3544 BFD_RELOC_BFIN_FUNCDESC
3545 ENUMX
3546 BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3547 ENUMX
3548 BFD_RELOC_BFIN_FUNCDESC_GOTHI
3549 ENUMX
3550 BFD_RELOC_BFIN_FUNCDESC_GOTLO
3551 ENUMX
3552 BFD_RELOC_BFIN_FUNCDESC_VALUE
3553 ENUMX
3554 BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3555 ENUMX
3556 BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3557 ENUMX
3558 BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3559 ENUMX
3560 BFD_RELOC_BFIN_GOTOFF17M4
3561 ENUMX
3562 BFD_RELOC_BFIN_GOTOFFHI
3563 ENUMX
3564 BFD_RELOC_BFIN_GOTOFFLO
3565 ENUMDOC
3566 ADI Blackfin FD-PIC relocations.
3567 ENUM
3568 BFD_RELOC_BFIN_GOT
3569 ENUMDOC
3570 ADI Blackfin GOT relocation.
3571 ENUM
3572 BFD_RELOC_BFIN_PLTPC
3573 ENUMDOC
3574 ADI Blackfin PLTPC relocation.
3575 ENUM
3576 BFD_ARELOC_BFIN_PUSH
3577 ENUMDOC
3578 ADI Blackfin arithmetic relocation.
3579 ENUM
3580 BFD_ARELOC_BFIN_CONST
3581 ENUMDOC
3582 ADI Blackfin arithmetic relocation.
3583 ENUM
3584 BFD_ARELOC_BFIN_ADD
3585 ENUMDOC
3586 ADI Blackfin arithmetic relocation.
3587 ENUM
3588 BFD_ARELOC_BFIN_SUB
3589 ENUMDOC
3590 ADI Blackfin arithmetic relocation.
3591 ENUM
3592 BFD_ARELOC_BFIN_MULT
3593 ENUMDOC
3594 ADI Blackfin arithmetic relocation.
3595 ENUM
3596 BFD_ARELOC_BFIN_DIV
3597 ENUMDOC
3598 ADI Blackfin arithmetic relocation.
3599 ENUM
3600 BFD_ARELOC_BFIN_MOD
3601 ENUMDOC
3602 ADI Blackfin arithmetic relocation.
3603 ENUM
3604 BFD_ARELOC_BFIN_LSHIFT
3605 ENUMDOC
3606 ADI Blackfin arithmetic relocation.
3607 ENUM
3608 BFD_ARELOC_BFIN_RSHIFT
3609 ENUMDOC
3610 ADI Blackfin arithmetic relocation.
3611 ENUM
3612 BFD_ARELOC_BFIN_AND
3613 ENUMDOC
3614 ADI Blackfin arithmetic relocation.
3615 ENUM
3616 BFD_ARELOC_BFIN_OR
3617 ENUMDOC
3618 ADI Blackfin arithmetic relocation.
3619 ENUM
3620 BFD_ARELOC_BFIN_XOR
3621 ENUMDOC
3622 ADI Blackfin arithmetic relocation.
3623 ENUM
3624 BFD_ARELOC_BFIN_LAND
3625 ENUMDOC
3626 ADI Blackfin arithmetic relocation.
3627 ENUM
3628 BFD_ARELOC_BFIN_LOR
3629 ENUMDOC
3630 ADI Blackfin arithmetic relocation.
3631 ENUM
3632 BFD_ARELOC_BFIN_LEN
3633 ENUMDOC
3634 ADI Blackfin arithmetic relocation.
3635 ENUM
3636 BFD_ARELOC_BFIN_NEG
3637 ENUMDOC
3638 ADI Blackfin arithmetic relocation.
3639 ENUM
3640 BFD_ARELOC_BFIN_COMP
3641 ENUMDOC
3642 ADI Blackfin arithmetic relocation.
3643 ENUM
3644 BFD_ARELOC_BFIN_PAGE
3645 ENUMDOC
3646 ADI Blackfin arithmetic relocation.
3647 ENUM
3648 BFD_ARELOC_BFIN_HWPAGE
3649 ENUMDOC
3650 ADI Blackfin arithmetic relocation.
3651 ENUM
3652 BFD_ARELOC_BFIN_ADDR
3653 ENUMDOC
3654 ADI Blackfin arithmetic relocation.
3655
3656 ENUM
3657 BFD_RELOC_D10V_10_PCREL_R
3658 ENUMDOC
3659 Mitsubishi D10V relocs.
3660 This is a 10-bit reloc with the right 2 bits
3661 assumed to be 0.
3662 ENUM
3663 BFD_RELOC_D10V_10_PCREL_L
3664 ENUMDOC
3665 Mitsubishi D10V relocs.
3666 This is a 10-bit reloc with the right 2 bits
3667 assumed to be 0. This is the same as the previous reloc
3668 except it is in the left container, i.e.,
3669 shifted left 15 bits.
3670 ENUM
3671 BFD_RELOC_D10V_18
3672 ENUMDOC
3673 This is an 18-bit reloc with the right 2 bits
3674 assumed to be 0.
3675 ENUM
3676 BFD_RELOC_D10V_18_PCREL
3677 ENUMDOC
3678 This is an 18-bit reloc with the right 2 bits
3679 assumed to be 0.
3680
3681 ENUM
3682 BFD_RELOC_D30V_6
3683 ENUMDOC
3684 Mitsubishi D30V relocs.
3685 This is a 6-bit absolute reloc.
3686 ENUM
3687 BFD_RELOC_D30V_9_PCREL
3688 ENUMDOC
3689 This is a 6-bit pc-relative reloc with
3690 the right 3 bits assumed to be 0.
3691 ENUM
3692 BFD_RELOC_D30V_9_PCREL_R
3693 ENUMDOC
3694 This is a 6-bit pc-relative reloc with
3695 the right 3 bits assumed to be 0. Same
3696 as the previous reloc but on the right side
3697 of the container.
3698 ENUM
3699 BFD_RELOC_D30V_15
3700 ENUMDOC
3701 This is a 12-bit absolute reloc with the
3702 right 3 bitsassumed to be 0.
3703 ENUM
3704 BFD_RELOC_D30V_15_PCREL
3705 ENUMDOC
3706 This is a 12-bit pc-relative reloc with
3707 the right 3 bits assumed to be 0.
3708 ENUM
3709 BFD_RELOC_D30V_15_PCREL_R
3710 ENUMDOC
3711 This is a 12-bit pc-relative reloc with
3712 the right 3 bits assumed to be 0. Same
3713 as the previous reloc but on the right side
3714 of the container.
3715 ENUM
3716 BFD_RELOC_D30V_21
3717 ENUMDOC
3718 This is an 18-bit absolute reloc with
3719 the right 3 bits assumed to be 0.
3720 ENUM
3721 BFD_RELOC_D30V_21_PCREL
3722 ENUMDOC
3723 This is an 18-bit pc-relative reloc with
3724 the right 3 bits assumed to be 0.
3725 ENUM
3726 BFD_RELOC_D30V_21_PCREL_R
3727 ENUMDOC
3728 This is an 18-bit pc-relative reloc with
3729 the right 3 bits assumed to be 0. Same
3730 as the previous reloc but on the right side
3731 of the container.
3732 ENUM
3733 BFD_RELOC_D30V_32
3734 ENUMDOC
3735 This is a 32-bit absolute reloc.
3736 ENUM
3737 BFD_RELOC_D30V_32_PCREL
3738 ENUMDOC
3739 This is a 32-bit pc-relative reloc.
3740
3741 ENUM
3742 BFD_RELOC_DLX_HI16_S
3743 ENUMDOC
3744 DLX relocs
3745 ENUM
3746 BFD_RELOC_DLX_LO16
3747 ENUMDOC
3748 DLX relocs
3749 ENUM
3750 BFD_RELOC_DLX_JMP26
3751 ENUMDOC
3752 DLX relocs
3753
3754 ENUM
3755 BFD_RELOC_M32C_HI8
3756 ENUMX
3757 BFD_RELOC_M32C_RL_JUMP
3758 ENUMX
3759 BFD_RELOC_M32C_RL_1ADDR
3760 ENUMX
3761 BFD_RELOC_M32C_RL_2ADDR
3762 ENUMDOC
3763 Renesas M16C/M32C Relocations.
3764
3765 ENUM
3766 BFD_RELOC_M32R_24
3767 ENUMDOC
3768 Renesas M32R (formerly Mitsubishi M32R) relocs.
3769 This is a 24 bit absolute address.
3770 ENUM
3771 BFD_RELOC_M32R_10_PCREL
3772 ENUMDOC
3773 This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3774 ENUM
3775 BFD_RELOC_M32R_18_PCREL
3776 ENUMDOC
3777 This is an 18-bit reloc with the right 2 bits assumed to be 0.
3778 ENUM
3779 BFD_RELOC_M32R_26_PCREL
3780 ENUMDOC
3781 This is a 26-bit reloc with the right 2 bits assumed to be 0.
3782 ENUM
3783 BFD_RELOC_M32R_HI16_ULO
3784 ENUMDOC
3785 This is a 16-bit reloc containing the high 16 bits of an address
3786 used when the lower 16 bits are treated as unsigned.
3787 ENUM
3788 BFD_RELOC_M32R_HI16_SLO
3789 ENUMDOC
3790 This is a 16-bit reloc containing the high 16 bits of an address
3791 used when the lower 16 bits are treated as signed.
3792 ENUM
3793 BFD_RELOC_M32R_LO16
3794 ENUMDOC
3795 This is a 16-bit reloc containing the lower 16 bits of an address.
3796 ENUM
3797 BFD_RELOC_M32R_SDA16
3798 ENUMDOC
3799 This is a 16-bit reloc containing the small data area offset for use in
3800 add3, load, and store instructions.
3801 ENUM
3802 BFD_RELOC_M32R_GOT24
3803 ENUMX
3804 BFD_RELOC_M32R_26_PLTREL
3805 ENUMX
3806 BFD_RELOC_M32R_COPY
3807 ENUMX
3808 BFD_RELOC_M32R_GLOB_DAT
3809 ENUMX
3810 BFD_RELOC_M32R_JMP_SLOT
3811 ENUMX
3812 BFD_RELOC_M32R_RELATIVE
3813 ENUMX
3814 BFD_RELOC_M32R_GOTOFF
3815 ENUMX
3816 BFD_RELOC_M32R_GOTOFF_HI_ULO
3817 ENUMX
3818 BFD_RELOC_M32R_GOTOFF_HI_SLO
3819 ENUMX
3820 BFD_RELOC_M32R_GOTOFF_LO
3821 ENUMX
3822 BFD_RELOC_M32R_GOTPC24
3823 ENUMX
3824 BFD_RELOC_M32R_GOT16_HI_ULO
3825 ENUMX
3826 BFD_RELOC_M32R_GOT16_HI_SLO
3827 ENUMX
3828 BFD_RELOC_M32R_GOT16_LO
3829 ENUMX
3830 BFD_RELOC_M32R_GOTPC_HI_ULO
3831 ENUMX
3832 BFD_RELOC_M32R_GOTPC_HI_SLO
3833 ENUMX
3834 BFD_RELOC_M32R_GOTPC_LO
3835 ENUMDOC
3836 For PIC.
3837
3838
3839 ENUM
3840 BFD_RELOC_NDS32_20
3841 ENUMDOC
3842 NDS32 relocs.
3843 This is a 20 bit absolute address.
3844 ENUM
3845 BFD_RELOC_NDS32_9_PCREL
3846 ENUMDOC
3847 This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
3848 ENUM
3849 BFD_RELOC_NDS32_WORD_9_PCREL
3850 ENUMDOC
3851 This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
3852 ENUM
3853 BFD_RELOC_NDS32_15_PCREL
3854 ENUMDOC
3855 This is an 15-bit reloc with the right 1 bit assumed to be 0.
3856 ENUM
3857 BFD_RELOC_NDS32_17_PCREL
3858 ENUMDOC
3859 This is an 17-bit reloc with the right 1 bit assumed to be 0.
3860 ENUM
3861 BFD_RELOC_NDS32_25_PCREL
3862 ENUMDOC
3863 This is a 25-bit reloc with the right 1 bit assumed to be 0.
3864 ENUM
3865 BFD_RELOC_NDS32_HI20
3866 ENUMDOC
3867 This is a 20-bit reloc containing the high 20 bits of an address
3868 used with the lower 12 bits
3869 ENUM
3870 BFD_RELOC_NDS32_LO12S3
3871 ENUMDOC
3872 This is a 12-bit reloc containing the lower 12 bits of an address
3873 then shift right by 3. This is used with ldi,sdi...
3874 ENUM
3875 BFD_RELOC_NDS32_LO12S2
3876 ENUMDOC
3877 This is a 12-bit reloc containing the lower 12 bits of an address
3878 then shift left by 2. This is used with lwi,swi...
3879 ENUM
3880 BFD_RELOC_NDS32_LO12S1
3881 ENUMDOC
3882 This is a 12-bit reloc containing the lower 12 bits of an address
3883 then shift left by 1. This is used with lhi,shi...
3884 ENUM
3885 BFD_RELOC_NDS32_LO12S0
3886 ENUMDOC
3887 This is a 12-bit reloc containing the lower 12 bits of an address
3888 then shift left by 0. This is used with lbisbi...
3889 ENUM
3890 BFD_RELOC_NDS32_LO12S0_ORI
3891 ENUMDOC
3892 This is a 12-bit reloc containing the lower 12 bits of an address
3893 then shift left by 0. This is only used with branch relaxations
3894 ENUM
3895 BFD_RELOC_NDS32_SDA15S3
3896 ENUMDOC
3897 This is a 15-bit reloc containing the small data area 18-bit signed offset
3898 and shift left by 3 for use in ldi, sdi...
3899 ENUM
3900 BFD_RELOC_NDS32_SDA15S2
3901 ENUMDOC
3902 This is a 15-bit reloc containing the small data area 17-bit signed offset
3903 and shift left by 2 for use in lwi, swi...
3904 ENUM
3905 BFD_RELOC_NDS32_SDA15S1
3906 ENUMDOC
3907 This is a 15-bit reloc containing the small data area 16-bit signed offset
3908 and shift left by 1 for use in lhi, shi...
3909 ENUM
3910 BFD_RELOC_NDS32_SDA15S0
3911 ENUMDOC
3912 This is a 15-bit reloc containing the small data area 15-bit signed offset
3913 and shift left by 0 for use in lbi, sbi...
3914 ENUM
3915 BFD_RELOC_NDS32_SDA16S3
3916 ENUMDOC
3917 This is a 16-bit reloc containing the small data area 16-bit signed offset
3918 and shift left by 3
3919 ENUM
3920 BFD_RELOC_NDS32_SDA17S2
3921 ENUMDOC
3922 This is a 17-bit reloc containing the small data area 17-bit signed offset
3923 and shift left by 2 for use in lwi.gp, swi.gp...
3924 ENUM
3925 BFD_RELOC_NDS32_SDA18S1
3926 ENUMDOC
3927 This is a 18-bit reloc containing the small data area 18-bit signed offset
3928 and shift left by 1 for use in lhi.gp, shi.gp...
3929 ENUM
3930 BFD_RELOC_NDS32_SDA19S0
3931 ENUMDOC
3932 This is a 19-bit reloc containing the small data area 19-bit signed offset
3933 and shift left by 0 for use in lbi.gp, sbi.gp...
3934 ENUM
3935 BFD_RELOC_NDS32_GOT20
3936 ENUMX
3937 BFD_RELOC_NDS32_9_PLTREL
3938 ENUMX
3939 BFD_RELOC_NDS32_25_PLTREL
3940 ENUMX
3941 BFD_RELOC_NDS32_COPY
3942 ENUMX
3943 BFD_RELOC_NDS32_GLOB_DAT
3944 ENUMX
3945 BFD_RELOC_NDS32_JMP_SLOT
3946 ENUMX
3947 BFD_RELOC_NDS32_RELATIVE
3948 ENUMX
3949 BFD_RELOC_NDS32_GOTOFF
3950 ENUMX
3951 BFD_RELOC_NDS32_GOTOFF_HI20
3952 ENUMX
3953 BFD_RELOC_NDS32_GOTOFF_LO12
3954 ENUMX
3955 BFD_RELOC_NDS32_GOTPC20
3956 ENUMX
3957 BFD_RELOC_NDS32_GOT_HI20
3958 ENUMX
3959 BFD_RELOC_NDS32_GOT_LO12
3960 ENUMX
3961 BFD_RELOC_NDS32_GOTPC_HI20
3962 ENUMX
3963 BFD_RELOC_NDS32_GOTPC_LO12
3964 ENUMDOC
3965 for PIC
3966 ENUM
3967 BFD_RELOC_NDS32_INSN16
3968 ENUMX
3969 BFD_RELOC_NDS32_LABEL
3970 ENUMX
3971 BFD_RELOC_NDS32_LONGCALL1
3972 ENUMX
3973 BFD_RELOC_NDS32_LONGCALL2
3974 ENUMX
3975 BFD_RELOC_NDS32_LONGCALL3
3976 ENUMX
3977 BFD_RELOC_NDS32_LONGJUMP1
3978 ENUMX
3979 BFD_RELOC_NDS32_LONGJUMP2
3980 ENUMX
3981 BFD_RELOC_NDS32_LONGJUMP3
3982 ENUMX
3983 BFD_RELOC_NDS32_LOADSTORE
3984 ENUMX
3985 BFD_RELOC_NDS32_9_FIXED
3986 ENUMX
3987 BFD_RELOC_NDS32_15_FIXED
3988 ENUMX
3989 BFD_RELOC_NDS32_17_FIXED
3990 ENUMX
3991 BFD_RELOC_NDS32_25_FIXED
3992 ENUMDOC
3993 for relax
3994 ENUM
3995 BFD_RELOC_NDS32_PLTREL_HI20
3996 ENUMX
3997 BFD_RELOC_NDS32_PLTREL_LO12
3998 ENUMX
3999 BFD_RELOC_NDS32_PLT_GOTREL_HI20
4000 ENUMX
4001 BFD_RELOC_NDS32_PLT_GOTREL_LO12
4002 ENUMDOC
4003 for PIC
4004 ENUM
4005 BFD_RELOC_NDS32_SDA12S2_DP
4006 ENUMX
4007 BFD_RELOC_NDS32_SDA12S2_SP
4008 ENUMX
4009 BFD_RELOC_NDS32_LO12S2_DP
4010 ENUMX
4011 BFD_RELOC_NDS32_LO12S2_SP
4012 ENUMDOC
4013 for floating point
4014 ENUM
4015 BFD_RELOC_NDS32_DWARF2_OP1
4016 ENUMX
4017 BFD_RELOC_NDS32_DWARF2_OP2
4018 ENUMX
4019 BFD_RELOC_NDS32_DWARF2_LEB
4020 ENUMDOC
4021 for dwarf2 debug_line.
4022 ENUM
4023 BFD_RELOC_NDS32_UPDATE_TA
4024 ENUMDOC
4025 for eliminate 16-bit instructions
4026 ENUM
4027 BFD_RELOC_NDS32_PLT_GOTREL_LO20
4028 ENUMX
4029 BFD_RELOC_NDS32_PLT_GOTREL_LO15
4030 ENUMX
4031 BFD_RELOC_NDS32_PLT_GOTREL_LO19
4032 ENUMX
4033 BFD_RELOC_NDS32_GOT_LO15
4034 ENUMX
4035 BFD_RELOC_NDS32_GOT_LO19
4036 ENUMX
4037 BFD_RELOC_NDS32_GOTOFF_LO15
4038 ENUMX
4039 BFD_RELOC_NDS32_GOTOFF_LO19
4040 ENUMX
4041 BFD_RELOC_NDS32_GOT15S2
4042 ENUMX
4043 BFD_RELOC_NDS32_GOT17S2
4044 ENUMDOC
4045 for PIC object relaxation
4046 ENUM
4047 BFD_RELOC_NDS32_5
4048 ENUMDOC
4049 NDS32 relocs.
4050 This is a 5 bit absolute address.
4051 ENUM
4052 BFD_RELOC_NDS32_10_UPCREL
4053 ENUMDOC
4054 This is a 10-bit unsigned pc-relative reloc with the right 1 bit assumed to be 0.
4055 ENUM
4056 BFD_RELOC_NDS32_SDA_FP7U2_RELA
4057 ENUMDOC
4058 If fp were omitted, fp can used as another gp.
4059 ENUM
4060 BFD_RELOC_NDS32_RELAX_ENTRY
4061 ENUMX
4062 BFD_RELOC_NDS32_GOT_SUFF
4063 ENUMX
4064 BFD_RELOC_NDS32_GOTOFF_SUFF
4065 ENUMX
4066 BFD_RELOC_NDS32_PLT_GOT_SUFF
4067 ENUMX
4068 BFD_RELOC_NDS32_MULCALL_SUFF
4069 ENUMX
4070 BFD_RELOC_NDS32_PTR
4071 ENUMX
4072 BFD_RELOC_NDS32_PTR_COUNT
4073 ENUMX
4074 BFD_RELOC_NDS32_PTR_RESOLVED
4075 ENUMX
4076 BFD_RELOC_NDS32_PLTBLOCK
4077 ENUMX
4078 BFD_RELOC_NDS32_RELAX_REGION_BEGIN
4079 ENUMX
4080 BFD_RELOC_NDS32_RELAX_REGION_END
4081 ENUMX
4082 BFD_RELOC_NDS32_MINUEND
4083 ENUMX
4084 BFD_RELOC_NDS32_SUBTRAHEND
4085 ENUMX
4086 BFD_RELOC_NDS32_DIFF8
4087 ENUMX
4088 BFD_RELOC_NDS32_DIFF16
4089 ENUMX
4090 BFD_RELOC_NDS32_DIFF32
4091 ENUMX
4092 BFD_RELOC_NDS32_DIFF_ULEB128
4093 ENUMX
4094 BFD_RELOC_NDS32_25_ABS
4095 ENUMX
4096 BFD_RELOC_NDS32_DATA
4097 ENUMX
4098 BFD_RELOC_NDS32_TRAN
4099 ENUMX
4100 BFD_RELOC_NDS32_17IFC_PCREL
4101 ENUMX
4102 BFD_RELOC_NDS32_10IFCU_PCREL
4103 ENUMDOC
4104 relaxation relative relocation types
4105
4106
4107 ENUM
4108 BFD_RELOC_V850_9_PCREL
4109 ENUMDOC
4110 This is a 9-bit reloc
4111 ENUM
4112 BFD_RELOC_V850_22_PCREL
4113 ENUMDOC
4114 This is a 22-bit reloc
4115
4116 ENUM
4117 BFD_RELOC_V850_SDA_16_16_OFFSET
4118 ENUMDOC
4119 This is a 16 bit offset from the short data area pointer.
4120 ENUM
4121 BFD_RELOC_V850_SDA_15_16_OFFSET
4122 ENUMDOC
4123 This is a 16 bit offset (of which only 15 bits are used) from the
4124 short data area pointer.
4125 ENUM
4126 BFD_RELOC_V850_ZDA_16_16_OFFSET
4127 ENUMDOC
4128 This is a 16 bit offset from the zero data area pointer.
4129 ENUM
4130 BFD_RELOC_V850_ZDA_15_16_OFFSET
4131 ENUMDOC
4132 This is a 16 bit offset (of which only 15 bits are used) from the
4133 zero data area pointer.
4134 ENUM
4135 BFD_RELOC_V850_TDA_6_8_OFFSET
4136 ENUMDOC
4137 This is an 8 bit offset (of which only 6 bits are used) from the
4138 tiny data area pointer.
4139 ENUM
4140 BFD_RELOC_V850_TDA_7_8_OFFSET
4141 ENUMDOC
4142 This is an 8bit offset (of which only 7 bits are used) from the tiny
4143 data area pointer.
4144 ENUM
4145 BFD_RELOC_V850_TDA_7_7_OFFSET
4146 ENUMDOC
4147 This is a 7 bit offset from the tiny data area pointer.
4148 ENUM
4149 BFD_RELOC_V850_TDA_16_16_OFFSET
4150 ENUMDOC
4151 This is a 16 bit offset from the tiny data area pointer.
4152 COMMENT
4153 ENUM
4154 BFD_RELOC_V850_TDA_4_5_OFFSET
4155 ENUMDOC
4156 This is a 5 bit offset (of which only 4 bits are used) from the tiny
4157 data area pointer.
4158 ENUM
4159 BFD_RELOC_V850_TDA_4_4_OFFSET
4160 ENUMDOC
4161 This is a 4 bit offset from the tiny data area pointer.
4162 ENUM
4163 BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
4164 ENUMDOC
4165 This is a 16 bit offset from the short data area pointer, with the
4166 bits placed non-contiguously in the instruction.
4167 ENUM
4168 BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
4169 ENUMDOC
4170 This is a 16 bit offset from the zero data area pointer, with the
4171 bits placed non-contiguously in the instruction.
4172 ENUM
4173 BFD_RELOC_V850_CALLT_6_7_OFFSET
4174 ENUMDOC
4175 This is a 6 bit offset from the call table base pointer.
4176 ENUM
4177 BFD_RELOC_V850_CALLT_16_16_OFFSET
4178 ENUMDOC
4179 This is a 16 bit offset from the call table base pointer.
4180 ENUM
4181 BFD_RELOC_V850_LONGCALL
4182 ENUMDOC
4183 Used for relaxing indirect function calls.
4184 ENUM
4185 BFD_RELOC_V850_LONGJUMP
4186 ENUMDOC
4187 Used for relaxing indirect jumps.
4188 ENUM
4189 BFD_RELOC_V850_ALIGN
4190 ENUMDOC
4191 Used to maintain alignment whilst relaxing.
4192 ENUM
4193 BFD_RELOC_V850_LO16_SPLIT_OFFSET
4194 ENUMDOC
4195 This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
4196 instructions.
4197 ENUM
4198 BFD_RELOC_V850_16_PCREL
4199 ENUMDOC
4200 This is a 16-bit reloc.
4201 ENUM
4202 BFD_RELOC_V850_17_PCREL
4203 ENUMDOC
4204 This is a 17-bit reloc.
4205 ENUM
4206 BFD_RELOC_V850_23
4207 ENUMDOC
4208 This is a 23-bit reloc.
4209 ENUM
4210 BFD_RELOC_V850_32_PCREL
4211 ENUMDOC
4212 This is a 32-bit reloc.
4213 ENUM
4214 BFD_RELOC_V850_32_ABS
4215 ENUMDOC
4216 This is a 32-bit reloc.
4217 ENUM
4218 BFD_RELOC_V850_16_SPLIT_OFFSET
4219 ENUMDOC
4220 This is a 16-bit reloc.
4221 ENUM
4222 BFD_RELOC_V850_16_S1
4223 ENUMDOC
4224 This is a 16-bit reloc.
4225 ENUM
4226 BFD_RELOC_V850_LO16_S1
4227 ENUMDOC
4228 Low 16 bits. 16 bit shifted by 1.
4229 ENUM
4230 BFD_RELOC_V850_CALLT_15_16_OFFSET
4231 ENUMDOC
4232 This is a 16 bit offset from the call table base pointer.
4233 ENUM
4234 BFD_RELOC_V850_32_GOTPCREL
4235 ENUMDOC
4236 DSO relocations.
4237 ENUM
4238 BFD_RELOC_V850_16_GOT
4239 ENUMDOC
4240 DSO relocations.
4241 ENUM
4242 BFD_RELOC_V850_32_GOT
4243 ENUMDOC
4244 DSO relocations.
4245 ENUM
4246 BFD_RELOC_V850_22_PLT_PCREL
4247 ENUMDOC
4248 DSO relocations.
4249 ENUM
4250 BFD_RELOC_V850_32_PLT_PCREL
4251 ENUMDOC
4252 DSO relocations.
4253 ENUM
4254 BFD_RELOC_V850_COPY
4255 ENUMDOC
4256 DSO relocations.
4257 ENUM
4258 BFD_RELOC_V850_GLOB_DAT
4259 ENUMDOC
4260 DSO relocations.
4261 ENUM
4262 BFD_RELOC_V850_JMP_SLOT
4263 ENUMDOC
4264 DSO relocations.
4265 ENUM
4266 BFD_RELOC_V850_RELATIVE
4267 ENUMDOC
4268 DSO relocations.
4269 ENUM
4270 BFD_RELOC_V850_16_GOTOFF
4271 ENUMDOC
4272 DSO relocations.
4273 ENUM
4274 BFD_RELOC_V850_32_GOTOFF
4275 ENUMDOC
4276 DSO relocations.
4277 ENUM
4278 BFD_RELOC_V850_CODE
4279 ENUMDOC
4280 start code.
4281 ENUM
4282 BFD_RELOC_V850_DATA
4283 ENUMDOC
4284 start data in text.
4285
4286 ENUM
4287 BFD_RELOC_TIC30_LDP
4288 ENUMDOC
4289 This is a 8bit DP reloc for the tms320c30, where the most
4290 significant 8 bits of a 24 bit word are placed into the least
4291 significant 8 bits of the opcode.
4292
4293 ENUM
4294 BFD_RELOC_TIC54X_PARTLS7
4295 ENUMDOC
4296 This is a 7bit reloc for the tms320c54x, where the least
4297 significant 7 bits of a 16 bit word are placed into the least
4298 significant 7 bits of the opcode.
4299
4300 ENUM
4301 BFD_RELOC_TIC54X_PARTMS9
4302 ENUMDOC
4303 This is a 9bit DP reloc for the tms320c54x, where the most
4304 significant 9 bits of a 16 bit word are placed into the least
4305 significant 9 bits of the opcode.
4306
4307 ENUM
4308 BFD_RELOC_TIC54X_23
4309 ENUMDOC
4310 This is an extended address 23-bit reloc for the tms320c54x.
4311
4312 ENUM
4313 BFD_RELOC_TIC54X_16_OF_23
4314 ENUMDOC
4315 This is a 16-bit reloc for the tms320c54x, where the least
4316 significant 16 bits of a 23-bit extended address are placed into
4317 the opcode.
4318
4319 ENUM
4320 BFD_RELOC_TIC54X_MS7_OF_23
4321 ENUMDOC
4322 This is a reloc for the tms320c54x, where the most
4323 significant 7 bits of a 23-bit extended address are placed into
4324 the opcode.
4325
4326 ENUM
4327 BFD_RELOC_C6000_PCR_S21
4328 ENUMX
4329 BFD_RELOC_C6000_PCR_S12
4330 ENUMX
4331 BFD_RELOC_C6000_PCR_S10
4332 ENUMX
4333 BFD_RELOC_C6000_PCR_S7
4334 ENUMX
4335 BFD_RELOC_C6000_ABS_S16
4336 ENUMX
4337 BFD_RELOC_C6000_ABS_L16
4338 ENUMX
4339 BFD_RELOC_C6000_ABS_H16
4340 ENUMX
4341 BFD_RELOC_C6000_SBR_U15_B
4342 ENUMX
4343 BFD_RELOC_C6000_SBR_U15_H
4344 ENUMX
4345 BFD_RELOC_C6000_SBR_U15_W
4346 ENUMX
4347 BFD_RELOC_C6000_SBR_S16
4348 ENUMX
4349 BFD_RELOC_C6000_SBR_L16_B
4350 ENUMX
4351 BFD_RELOC_C6000_SBR_L16_H
4352 ENUMX
4353 BFD_RELOC_C6000_SBR_L16_W
4354 ENUMX
4355 BFD_RELOC_C6000_SBR_H16_B
4356 ENUMX
4357 BFD_RELOC_C6000_SBR_H16_H
4358 ENUMX
4359 BFD_RELOC_C6000_SBR_H16_W
4360 ENUMX
4361 BFD_RELOC_C6000_SBR_GOT_U15_W
4362 ENUMX
4363 BFD_RELOC_C6000_SBR_GOT_L16_W
4364 ENUMX
4365 BFD_RELOC_C6000_SBR_GOT_H16_W
4366 ENUMX
4367 BFD_RELOC_C6000_DSBT_INDEX
4368 ENUMX
4369 BFD_RELOC_C6000_PREL31
4370 ENUMX
4371 BFD_RELOC_C6000_COPY
4372 ENUMX
4373 BFD_RELOC_C6000_JUMP_SLOT
4374 ENUMX
4375 BFD_RELOC_C6000_EHTYPE
4376 ENUMX
4377 BFD_RELOC_C6000_PCR_H16
4378 ENUMX
4379 BFD_RELOC_C6000_PCR_L16
4380 ENUMX
4381 BFD_RELOC_C6000_ALIGN
4382 ENUMX
4383 BFD_RELOC_C6000_FPHEAD
4384 ENUMX
4385 BFD_RELOC_C6000_NOCMP
4386 ENUMDOC
4387 TMS320C6000 relocations.
4388
4389 ENUM
4390 BFD_RELOC_FR30_48
4391 ENUMDOC
4392 This is a 48 bit reloc for the FR30 that stores 32 bits.
4393 ENUM
4394 BFD_RELOC_FR30_20
4395 ENUMDOC
4396 This is a 32 bit reloc for the FR30 that stores 20 bits split up into
4397 two sections.
4398 ENUM
4399 BFD_RELOC_FR30_6_IN_4
4400 ENUMDOC
4401 This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
4402 4 bits.
4403 ENUM
4404 BFD_RELOC_FR30_8_IN_8
4405 ENUMDOC
4406 This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
4407 into 8 bits.
4408 ENUM
4409 BFD_RELOC_FR30_9_IN_8
4410 ENUMDOC
4411 This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
4412 into 8 bits.
4413 ENUM
4414 BFD_RELOC_FR30_10_IN_8
4415 ENUMDOC
4416 This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
4417 into 8 bits.
4418 ENUM
4419 BFD_RELOC_FR30_9_PCREL
4420 ENUMDOC
4421 This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
4422 short offset into 8 bits.
4423 ENUM
4424 BFD_RELOC_FR30_12_PCREL
4425 ENUMDOC
4426 This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
4427 short offset into 11 bits.
4428
4429 ENUM
4430 BFD_RELOC_MCORE_PCREL_IMM8BY4
4431 ENUMX
4432 BFD_RELOC_MCORE_PCREL_IMM11BY2
4433 ENUMX
4434 BFD_RELOC_MCORE_PCREL_IMM4BY2
4435 ENUMX
4436 BFD_RELOC_MCORE_PCREL_32
4437 ENUMX
4438 BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
4439 ENUMX
4440 BFD_RELOC_MCORE_RVA
4441 ENUMDOC
4442 Motorola Mcore relocations.
4443
4444 ENUM
4445 BFD_RELOC_MEP_8
4446 ENUMX
4447 BFD_RELOC_MEP_16
4448 ENUMX
4449 BFD_RELOC_MEP_32
4450 ENUMX
4451 BFD_RELOC_MEP_PCREL8A2
4452 ENUMX
4453 BFD_RELOC_MEP_PCREL12A2
4454 ENUMX
4455 BFD_RELOC_MEP_PCREL17A2
4456 ENUMX
4457 BFD_RELOC_MEP_PCREL24A2
4458 ENUMX
4459 BFD_RELOC_MEP_PCABS24A2
4460 ENUMX
4461 BFD_RELOC_MEP_LOW16
4462 ENUMX
4463 BFD_RELOC_MEP_HI16U
4464 ENUMX
4465 BFD_RELOC_MEP_HI16S
4466 ENUMX
4467 BFD_RELOC_MEP_GPREL
4468 ENUMX
4469 BFD_RELOC_MEP_TPREL
4470 ENUMX
4471 BFD_RELOC_MEP_TPREL7
4472 ENUMX
4473 BFD_RELOC_MEP_TPREL7A2
4474 ENUMX
4475 BFD_RELOC_MEP_TPREL7A4
4476 ENUMX
4477 BFD_RELOC_MEP_UIMM24
4478 ENUMX
4479 BFD_RELOC_MEP_ADDR24A4
4480 ENUMX
4481 BFD_RELOC_MEP_GNU_VTINHERIT
4482 ENUMX
4483 BFD_RELOC_MEP_GNU_VTENTRY
4484 ENUMDOC
4485 Toshiba Media Processor Relocations.
4486 COMMENT
4487
4488 ENUM
4489 BFD_RELOC_METAG_HIADDR16
4490 ENUMX
4491 BFD_RELOC_METAG_LOADDR16
4492 ENUMX
4493 BFD_RELOC_METAG_RELBRANCH
4494 ENUMX
4495 BFD_RELOC_METAG_GETSETOFF
4496 ENUMX
4497 BFD_RELOC_METAG_HIOG
4498 ENUMX
4499 BFD_RELOC_METAG_LOOG
4500 ENUMX
4501 BFD_RELOC_METAG_REL8
4502 ENUMX
4503 BFD_RELOC_METAG_REL16
4504 ENUMX
4505 BFD_RELOC_METAG_HI16_GOTOFF
4506 ENUMX
4507 BFD_RELOC_METAG_LO16_GOTOFF
4508 ENUMX
4509 BFD_RELOC_METAG_GETSET_GOTOFF
4510 ENUMX
4511 BFD_RELOC_METAG_GETSET_GOT
4512 ENUMX
4513 BFD_RELOC_METAG_HI16_GOTPC
4514 ENUMX
4515 BFD_RELOC_METAG_LO16_GOTPC
4516 ENUMX
4517 BFD_RELOC_METAG_HI16_PLT
4518 ENUMX
4519 BFD_RELOC_METAG_LO16_PLT
4520 ENUMX
4521 BFD_RELOC_METAG_RELBRANCH_PLT
4522 ENUMX
4523 BFD_RELOC_METAG_GOTOFF
4524 ENUMX
4525 BFD_RELOC_METAG_PLT
4526 ENUMX
4527 BFD_RELOC_METAG_COPY
4528 ENUMX
4529 BFD_RELOC_METAG_JMP_SLOT
4530 ENUMX
4531 BFD_RELOC_METAG_RELATIVE
4532 ENUMX
4533 BFD_RELOC_METAG_GLOB_DAT
4534 ENUMX
4535 BFD_RELOC_METAG_TLS_GD
4536 ENUMX
4537 BFD_RELOC_METAG_TLS_LDM
4538 ENUMX
4539 BFD_RELOC_METAG_TLS_LDO_HI16
4540 ENUMX
4541 BFD_RELOC_METAG_TLS_LDO_LO16
4542 ENUMX
4543 BFD_RELOC_METAG_TLS_LDO
4544 ENUMX
4545 BFD_RELOC_METAG_TLS_IE
4546 ENUMX
4547 BFD_RELOC_METAG_TLS_IENONPIC
4548 ENUMX
4549 BFD_RELOC_METAG_TLS_IENONPIC_HI16
4550 ENUMX
4551 BFD_RELOC_METAG_TLS_IENONPIC_LO16
4552 ENUMX
4553 BFD_RELOC_METAG_TLS_TPOFF
4554 ENUMX
4555 BFD_RELOC_METAG_TLS_DTPMOD
4556 ENUMX
4557 BFD_RELOC_METAG_TLS_DTPOFF
4558 ENUMX
4559 BFD_RELOC_METAG_TLS_LE
4560 ENUMX
4561 BFD_RELOC_METAG_TLS_LE_HI16
4562 ENUMX
4563 BFD_RELOC_METAG_TLS_LE_LO16
4564 ENUMDOC
4565 Imagination Technologies Meta relocations.
4566
4567 ENUM
4568 BFD_RELOC_MMIX_GETA
4569 ENUMX
4570 BFD_RELOC_MMIX_GETA_1
4571 ENUMX
4572 BFD_RELOC_MMIX_GETA_2
4573 ENUMX
4574 BFD_RELOC_MMIX_GETA_3
4575 ENUMDOC
4576 These are relocations for the GETA instruction.
4577 ENUM
4578 BFD_RELOC_MMIX_CBRANCH
4579 ENUMX
4580 BFD_RELOC_MMIX_CBRANCH_J
4581 ENUMX
4582 BFD_RELOC_MMIX_CBRANCH_1
4583 ENUMX
4584 BFD_RELOC_MMIX_CBRANCH_2
4585 ENUMX
4586 BFD_RELOC_MMIX_CBRANCH_3
4587 ENUMDOC
4588 These are relocations for a conditional branch instruction.
4589 ENUM
4590 BFD_RELOC_MMIX_PUSHJ
4591 ENUMX
4592 BFD_RELOC_MMIX_PUSHJ_1
4593 ENUMX
4594 BFD_RELOC_MMIX_PUSHJ_2
4595 ENUMX
4596 BFD_RELOC_MMIX_PUSHJ_3
4597 ENUMX
4598 BFD_RELOC_MMIX_PUSHJ_STUBBABLE
4599 ENUMDOC
4600 These are relocations for the PUSHJ instruction.
4601 ENUM
4602 BFD_RELOC_MMIX_JMP
4603 ENUMX
4604 BFD_RELOC_MMIX_JMP_1
4605 ENUMX
4606 BFD_RELOC_MMIX_JMP_2
4607 ENUMX
4608 BFD_RELOC_MMIX_JMP_3
4609 ENUMDOC
4610 These are relocations for the JMP instruction.
4611 ENUM
4612 BFD_RELOC_MMIX_ADDR19
4613 ENUMDOC
4614 This is a relocation for a relative address as in a GETA instruction or
4615 a branch.
4616 ENUM
4617 BFD_RELOC_MMIX_ADDR27
4618 ENUMDOC
4619 This is a relocation for a relative address as in a JMP instruction.
4620 ENUM
4621 BFD_RELOC_MMIX_REG_OR_BYTE
4622 ENUMDOC
4623 This is a relocation for an instruction field that may be a general
4624 register or a value 0..255.
4625 ENUM
4626 BFD_RELOC_MMIX_REG
4627 ENUMDOC
4628 This is a relocation for an instruction field that may be a general
4629 register.
4630 ENUM
4631 BFD_RELOC_MMIX_BASE_PLUS_OFFSET
4632 ENUMDOC
4633 This is a relocation for two instruction fields holding a register and
4634 an offset, the equivalent of the relocation.
4635 ENUM
4636 BFD_RELOC_MMIX_LOCAL
4637 ENUMDOC
4638 This relocation is an assertion that the expression is not allocated as
4639 a global register. It does not modify contents.
4640
4641 ENUM
4642 BFD_RELOC_AVR_7_PCREL
4643 ENUMDOC
4644 This is a 16 bit reloc for the AVR that stores 8 bit pc relative
4645 short offset into 7 bits.
4646 ENUM
4647 BFD_RELOC_AVR_13_PCREL
4648 ENUMDOC
4649 This is a 16 bit reloc for the AVR that stores 13 bit pc relative
4650 short offset into 12 bits.
4651 ENUM
4652 BFD_RELOC_AVR_16_PM
4653 ENUMDOC
4654 This is a 16 bit reloc for the AVR that stores 17 bit value (usually
4655 program memory address) into 16 bits.
4656 ENUM
4657 BFD_RELOC_AVR_LO8_LDI
4658 ENUMDOC
4659 This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4660 data memory address) into 8 bit immediate value of LDI insn.
4661 ENUM
4662 BFD_RELOC_AVR_HI8_LDI
4663 ENUMDOC
4664 This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4665 of data memory address) into 8 bit immediate value of LDI insn.
4666 ENUM
4667 BFD_RELOC_AVR_HH8_LDI
4668 ENUMDOC
4669 This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4670 of program memory address) into 8 bit immediate value of LDI insn.
4671 ENUM
4672 BFD_RELOC_AVR_MS8_LDI
4673 ENUMDOC
4674 This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4675 of 32 bit value) into 8 bit immediate value of LDI insn.
4676 ENUM
4677 BFD_RELOC_AVR_LO8_LDI_NEG
4678 ENUMDOC
4679 This is a 16 bit reloc for the AVR that stores negated 8 bit value
4680 (usually data memory address) into 8 bit immediate value of SUBI insn.
4681 ENUM
4682 BFD_RELOC_AVR_HI8_LDI_NEG
4683 ENUMDOC
4684 This is a 16 bit reloc for the AVR that stores negated 8 bit value
4685 (high 8 bit of data memory address) into 8 bit immediate value of
4686 SUBI insn.
4687 ENUM
4688 BFD_RELOC_AVR_HH8_LDI_NEG
4689 ENUMDOC
4690 This is a 16 bit reloc for the AVR that stores negated 8 bit value
4691 (most high 8 bit of program memory address) into 8 bit immediate value
4692 of LDI or SUBI insn.
4693 ENUM
4694 BFD_RELOC_AVR_MS8_LDI_NEG
4695 ENUMDOC
4696 This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
4697 of 32 bit value) into 8 bit immediate value of LDI insn.
4698 ENUM
4699 BFD_RELOC_AVR_LO8_LDI_PM
4700 ENUMDOC
4701 This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4702 command address) into 8 bit immediate value of LDI insn.
4703 ENUM
4704 BFD_RELOC_AVR_LO8_LDI_GS
4705 ENUMDOC
4706 This is a 16 bit reloc for the AVR that stores 8 bit value
4707 (command address) into 8 bit immediate value of LDI insn. If the address
4708 is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4709 in the lower 128k.
4710 ENUM
4711 BFD_RELOC_AVR_HI8_LDI_PM
4712 ENUMDOC
4713 This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4714 of command address) into 8 bit immediate value of LDI insn.
4715 ENUM
4716 BFD_RELOC_AVR_HI8_LDI_GS
4717 ENUMDOC
4718 This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4719 of command address) into 8 bit immediate value of LDI insn. If the address
4720 is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4721 below 128k.
4722 ENUM
4723 BFD_RELOC_AVR_HH8_LDI_PM
4724 ENUMDOC
4725 This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4726 of command address) into 8 bit immediate value of LDI insn.
4727 ENUM
4728 BFD_RELOC_AVR_LO8_LDI_PM_NEG
4729 ENUMDOC
4730 This is a 16 bit reloc for the AVR that stores negated 8 bit value
4731 (usually command address) into 8 bit immediate value of SUBI insn.
4732 ENUM
4733 BFD_RELOC_AVR_HI8_LDI_PM_NEG
4734 ENUMDOC
4735 This is a 16 bit reloc for the AVR that stores negated 8 bit value
4736 (high 8 bit of 16 bit command address) into 8 bit immediate value
4737 of SUBI insn.
4738 ENUM
4739 BFD_RELOC_AVR_HH8_LDI_PM_NEG
4740 ENUMDOC
4741 This is a 16 bit reloc for the AVR that stores negated 8 bit value
4742 (high 6 bit of 22 bit command address) into 8 bit immediate
4743 value of SUBI insn.
4744 ENUM
4745 BFD_RELOC_AVR_CALL
4746 ENUMDOC
4747 This is a 32 bit reloc for the AVR that stores 23 bit value
4748 into 22 bits.
4749 ENUM
4750 BFD_RELOC_AVR_LDI
4751 ENUMDOC
4752 This is a 16 bit reloc for the AVR that stores all needed bits
4753 for absolute addressing with ldi with overflow check to linktime
4754 ENUM
4755 BFD_RELOC_AVR_6
4756 ENUMDOC
4757 This is a 6 bit reloc for the AVR that stores offset for ldd/std
4758 instructions
4759 ENUM
4760 BFD_RELOC_AVR_6_ADIW
4761 ENUMDOC
4762 This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
4763 instructions
4764 ENUM
4765 BFD_RELOC_AVR_8_LO
4766 ENUMDOC
4767 This is a 8 bit reloc for the AVR that stores bits 0..7 of a symbol
4768 in .byte lo8(symbol)
4769 ENUM
4770 BFD_RELOC_AVR_8_HI
4771 ENUMDOC
4772 This is a 8 bit reloc for the AVR that stores bits 8..15 of a symbol
4773 in .byte hi8(symbol)
4774 ENUM
4775 BFD_RELOC_AVR_8_HLO
4776 ENUMDOC
4777 This is a 8 bit reloc for the AVR that stores bits 16..23 of a symbol
4778 in .byte hlo8(symbol)
4779 ENUM
4780 BFD_RELOC_AVR_DIFF8
4781 ENUMX
4782 BFD_RELOC_AVR_DIFF16
4783 ENUMX
4784 BFD_RELOC_AVR_DIFF32
4785 ENUMDOC
4786 AVR relocations to mark the difference of two local symbols.
4787 These are only needed to support linker relaxation and can be ignored
4788 when not relaxing. The field is set to the value of the difference
4789 assuming no relaxation. The relocation encodes the position of the
4790 second symbol so the linker can determine whether to adjust the field
4791 value.
4792 ENUM
4793 BFD_RELOC_AVR_LDS_STS_16
4794 ENUMDOC
4795 This is a 7 bit reloc for the AVR that stores SRAM address for 16bit
4796 lds and sts instructions supported only tiny core.
4797 ENUM
4798 BFD_RELOC_AVR_PORT6
4799 ENUMDOC
4800 This is a 6 bit reloc for the AVR that stores an I/O register
4801 number for the IN and OUT instructions
4802 ENUM
4803 BFD_RELOC_AVR_PORT5
4804 ENUMDOC
4805 This is a 5 bit reloc for the AVR that stores an I/O register
4806 number for the SBIC, SBIS, SBI and CBI instructions
4807 ENUM
4808 BFD_RELOC_RL78_NEG8
4809 ENUMX
4810 BFD_RELOC_RL78_NEG16
4811 ENUMX
4812 BFD_RELOC_RL78_NEG24
4813 ENUMX
4814 BFD_RELOC_RL78_NEG32
4815 ENUMX
4816 BFD_RELOC_RL78_16_OP
4817 ENUMX
4818 BFD_RELOC_RL78_24_OP
4819 ENUMX
4820 BFD_RELOC_RL78_32_OP
4821 ENUMX
4822 BFD_RELOC_RL78_8U
4823 ENUMX
4824 BFD_RELOC_RL78_16U
4825 ENUMX
4826 BFD_RELOC_RL78_24U
4827 ENUMX
4828 BFD_RELOC_RL78_DIR3U_PCREL
4829 ENUMX
4830 BFD_RELOC_RL78_DIFF
4831 ENUMX
4832 BFD_RELOC_RL78_GPRELB
4833 ENUMX
4834 BFD_RELOC_RL78_GPRELW
4835 ENUMX
4836 BFD_RELOC_RL78_GPRELL
4837 ENUMX
4838 BFD_RELOC_RL78_SYM
4839 ENUMX
4840 BFD_RELOC_RL78_OP_SUBTRACT
4841 ENUMX
4842 BFD_RELOC_RL78_OP_NEG
4843 ENUMX
4844 BFD_RELOC_RL78_OP_AND
4845 ENUMX
4846 BFD_RELOC_RL78_OP_SHRA
4847 ENUMX
4848 BFD_RELOC_RL78_ABS8
4849 ENUMX
4850 BFD_RELOC_RL78_ABS16
4851 ENUMX
4852 BFD_RELOC_RL78_ABS16_REV
4853 ENUMX
4854 BFD_RELOC_RL78_ABS32
4855 ENUMX
4856 BFD_RELOC_RL78_ABS32_REV
4857 ENUMX
4858 BFD_RELOC_RL78_ABS16U
4859 ENUMX
4860 BFD_RELOC_RL78_ABS16UW
4861 ENUMX
4862 BFD_RELOC_RL78_ABS16UL
4863 ENUMX
4864 BFD_RELOC_RL78_RELAX
4865 ENUMX
4866 BFD_RELOC_RL78_HI16
4867 ENUMX
4868 BFD_RELOC_RL78_HI8
4869 ENUMX
4870 BFD_RELOC_RL78_LO16
4871 ENUMX
4872 BFD_RELOC_RL78_CODE
4873 ENUMDOC
4874 Renesas RL78 Relocations.
4875
4876 ENUM
4877 BFD_RELOC_RX_NEG8
4878 ENUMX
4879 BFD_RELOC_RX_NEG16
4880 ENUMX
4881 BFD_RELOC_RX_NEG24
4882 ENUMX
4883 BFD_RELOC_RX_NEG32
4884 ENUMX
4885 BFD_RELOC_RX_16_OP
4886 ENUMX
4887 BFD_RELOC_RX_24_OP
4888 ENUMX
4889 BFD_RELOC_RX_32_OP
4890 ENUMX
4891 BFD_RELOC_RX_8U
4892 ENUMX
4893 BFD_RELOC_RX_16U
4894 ENUMX
4895 BFD_RELOC_RX_24U
4896 ENUMX
4897 BFD_RELOC_RX_DIR3U_PCREL
4898 ENUMX
4899 BFD_RELOC_RX_DIFF
4900 ENUMX
4901 BFD_RELOC_RX_GPRELB
4902 ENUMX
4903 BFD_RELOC_RX_GPRELW
4904 ENUMX
4905 BFD_RELOC_RX_GPRELL
4906 ENUMX
4907 BFD_RELOC_RX_SYM
4908 ENUMX
4909 BFD_RELOC_RX_OP_SUBTRACT
4910 ENUMX
4911 BFD_RELOC_RX_OP_NEG
4912 ENUMX
4913 BFD_RELOC_RX_ABS8
4914 ENUMX
4915 BFD_RELOC_RX_ABS16
4916 ENUMX
4917 BFD_RELOC_RX_ABS16_REV
4918 ENUMX
4919 BFD_RELOC_RX_ABS32
4920 ENUMX
4921 BFD_RELOC_RX_ABS32_REV
4922 ENUMX
4923 BFD_RELOC_RX_ABS16U
4924 ENUMX
4925 BFD_RELOC_RX_ABS16UW
4926 ENUMX
4927 BFD_RELOC_RX_ABS16UL
4928 ENUMX
4929 BFD_RELOC_RX_RELAX
4930 ENUMDOC
4931 Renesas RX Relocations.
4932
4933 ENUM
4934 BFD_RELOC_390_12
4935 ENUMDOC
4936 Direct 12 bit.
4937 ENUM
4938 BFD_RELOC_390_GOT12
4939 ENUMDOC
4940 12 bit GOT offset.
4941 ENUM
4942 BFD_RELOC_390_PLT32
4943 ENUMDOC
4944 32 bit PC relative PLT address.
4945 ENUM
4946 BFD_RELOC_390_COPY
4947 ENUMDOC
4948 Copy symbol at runtime.
4949 ENUM
4950 BFD_RELOC_390_GLOB_DAT
4951 ENUMDOC
4952 Create GOT entry.
4953 ENUM
4954 BFD_RELOC_390_JMP_SLOT
4955 ENUMDOC
4956 Create PLT entry.
4957 ENUM
4958 BFD_RELOC_390_RELATIVE
4959 ENUMDOC
4960 Adjust by program base.
4961 ENUM
4962 BFD_RELOC_390_GOTPC
4963 ENUMDOC
4964 32 bit PC relative offset to GOT.
4965 ENUM
4966 BFD_RELOC_390_GOT16
4967 ENUMDOC
4968 16 bit GOT offset.
4969 ENUM
4970 BFD_RELOC_390_PC12DBL
4971 ENUMDOC
4972 PC relative 12 bit shifted by 1.
4973 ENUM
4974 BFD_RELOC_390_PLT12DBL
4975 ENUMDOC
4976 12 bit PC rel. PLT shifted by 1.
4977 ENUM
4978 BFD_RELOC_390_PC16DBL
4979 ENUMDOC
4980 PC relative 16 bit shifted by 1.
4981 ENUM
4982 BFD_RELOC_390_PLT16DBL
4983 ENUMDOC
4984 16 bit PC rel. PLT shifted by 1.
4985 ENUM
4986 BFD_RELOC_390_PC24DBL
4987 ENUMDOC
4988 PC relative 24 bit shifted by 1.
4989 ENUM
4990 BFD_RELOC_390_PLT24DBL
4991 ENUMDOC
4992 24 bit PC rel. PLT shifted by 1.
4993 ENUM
4994 BFD_RELOC_390_PC32DBL
4995 ENUMDOC
4996 PC relative 32 bit shifted by 1.
4997 ENUM
4998 BFD_RELOC_390_PLT32DBL
4999 ENUMDOC
5000 32 bit PC rel. PLT shifted by 1.
5001 ENUM
5002 BFD_RELOC_390_GOTPCDBL
5003 ENUMDOC
5004 32 bit PC rel. GOT shifted by 1.
5005 ENUM
5006 BFD_RELOC_390_GOT64
5007 ENUMDOC
5008 64 bit GOT offset.
5009 ENUM
5010 BFD_RELOC_390_PLT64
5011 ENUMDOC
5012 64 bit PC relative PLT address.
5013 ENUM
5014 BFD_RELOC_390_GOTENT
5015 ENUMDOC
5016 32 bit rel. offset to GOT entry.
5017 ENUM
5018 BFD_RELOC_390_GOTOFF64
5019 ENUMDOC
5020 64 bit offset to GOT.
5021 ENUM
5022 BFD_RELOC_390_GOTPLT12
5023 ENUMDOC
5024 12-bit offset to symbol-entry within GOT, with PLT handling.
5025 ENUM
5026 BFD_RELOC_390_GOTPLT16
5027 ENUMDOC
5028 16-bit offset to symbol-entry within GOT, with PLT handling.
5029 ENUM
5030 BFD_RELOC_390_GOTPLT32
5031 ENUMDOC
5032 32-bit offset to symbol-entry within GOT, with PLT handling.
5033 ENUM
5034 BFD_RELOC_390_GOTPLT64
5035 ENUMDOC
5036 64-bit offset to symbol-entry within GOT, with PLT handling.
5037 ENUM
5038 BFD_RELOC_390_GOTPLTENT
5039 ENUMDOC
5040 32-bit rel. offset to symbol-entry within GOT, with PLT handling.
5041 ENUM
5042 BFD_RELOC_390_PLTOFF16
5043 ENUMDOC
5044 16-bit rel. offset from the GOT to a PLT entry.
5045 ENUM
5046 BFD_RELOC_390_PLTOFF32
5047 ENUMDOC
5048 32-bit rel. offset from the GOT to a PLT entry.
5049 ENUM
5050 BFD_RELOC_390_PLTOFF64
5051 ENUMDOC
5052 64-bit rel. offset from the GOT to a PLT entry.
5053
5054 ENUM
5055 BFD_RELOC_390_TLS_LOAD
5056 ENUMX
5057 BFD_RELOC_390_TLS_GDCALL
5058 ENUMX
5059 BFD_RELOC_390_TLS_LDCALL
5060 ENUMX
5061 BFD_RELOC_390_TLS_GD32
5062 ENUMX
5063 BFD_RELOC_390_TLS_GD64
5064 ENUMX
5065 BFD_RELOC_390_TLS_GOTIE12
5066 ENUMX
5067 BFD_RELOC_390_TLS_GOTIE32
5068 ENUMX
5069 BFD_RELOC_390_TLS_GOTIE64
5070 ENUMX
5071 BFD_RELOC_390_TLS_LDM32
5072 ENUMX
5073 BFD_RELOC_390_TLS_LDM64
5074 ENUMX
5075 BFD_RELOC_390_TLS_IE32
5076 ENUMX
5077 BFD_RELOC_390_TLS_IE64
5078 ENUMX
5079 BFD_RELOC_390_TLS_IEENT
5080 ENUMX
5081 BFD_RELOC_390_TLS_LE32
5082 ENUMX
5083 BFD_RELOC_390_TLS_LE64
5084 ENUMX
5085 BFD_RELOC_390_TLS_LDO32
5086 ENUMX
5087 BFD_RELOC_390_TLS_LDO64
5088 ENUMX
5089 BFD_RELOC_390_TLS_DTPMOD
5090 ENUMX
5091 BFD_RELOC_390_TLS_DTPOFF
5092 ENUMX
5093 BFD_RELOC_390_TLS_TPOFF
5094 ENUMDOC
5095 s390 tls relocations.
5096
5097 ENUM
5098 BFD_RELOC_390_20
5099 ENUMX
5100 BFD_RELOC_390_GOT20
5101 ENUMX
5102 BFD_RELOC_390_GOTPLT20
5103 ENUMX
5104 BFD_RELOC_390_TLS_GOTIE20
5105 ENUMDOC
5106 Long displacement extension.
5107
5108 ENUM
5109 BFD_RELOC_390_IRELATIVE
5110 ENUMDOC
5111 STT_GNU_IFUNC relocation.
5112
5113 ENUM
5114 BFD_RELOC_SCORE_GPREL15
5115 ENUMDOC
5116 Score relocations
5117 Low 16 bit for load/store
5118 ENUM
5119 BFD_RELOC_SCORE_DUMMY2
5120 ENUMX
5121 BFD_RELOC_SCORE_JMP
5122 ENUMDOC
5123 This is a 24-bit reloc with the right 1 bit assumed to be 0
5124 ENUM
5125 BFD_RELOC_SCORE_BRANCH
5126 ENUMDOC
5127 This is a 19-bit reloc with the right 1 bit assumed to be 0
5128 ENUM
5129 BFD_RELOC_SCORE_IMM30
5130 ENUMDOC
5131 This is a 32-bit reloc for 48-bit instructions.
5132 ENUM
5133 BFD_RELOC_SCORE_IMM32
5134 ENUMDOC
5135 This is a 32-bit reloc for 48-bit instructions.
5136 ENUM
5137 BFD_RELOC_SCORE16_JMP
5138 ENUMDOC
5139 This is a 11-bit reloc with the right 1 bit assumed to be 0
5140 ENUM
5141 BFD_RELOC_SCORE16_BRANCH
5142 ENUMDOC
5143 This is a 8-bit reloc with the right 1 bit assumed to be 0
5144 ENUM
5145 BFD_RELOC_SCORE_BCMP
5146 ENUMDOC
5147 This is a 9-bit reloc with the right 1 bit assumed to be 0
5148 ENUM
5149 BFD_RELOC_SCORE_GOT15
5150 ENUMX
5151 BFD_RELOC_SCORE_GOT_LO16
5152 ENUMX
5153 BFD_RELOC_SCORE_CALL15
5154 ENUMX
5155 BFD_RELOC_SCORE_DUMMY_HI16
5156 ENUMDOC
5157 Undocumented Score relocs
5158
5159 ENUM
5160 BFD_RELOC_IP2K_FR9
5161 ENUMDOC
5162 Scenix IP2K - 9-bit register number / data address
5163 ENUM
5164 BFD_RELOC_IP2K_BANK
5165 ENUMDOC
5166 Scenix IP2K - 4-bit register/data bank number
5167 ENUM
5168 BFD_RELOC_IP2K_ADDR16CJP
5169 ENUMDOC
5170 Scenix IP2K - low 13 bits of instruction word address
5171 ENUM
5172 BFD_RELOC_IP2K_PAGE3
5173 ENUMDOC
5174 Scenix IP2K - high 3 bits of instruction word address
5175 ENUM
5176 BFD_RELOC_IP2K_LO8DATA
5177 ENUMX
5178 BFD_RELOC_IP2K_HI8DATA
5179 ENUMX
5180 BFD_RELOC_IP2K_EX8DATA
5181 ENUMDOC
5182 Scenix IP2K - ext/low/high 8 bits of data address
5183 ENUM
5184 BFD_RELOC_IP2K_LO8INSN
5185 ENUMX
5186 BFD_RELOC_IP2K_HI8INSN
5187 ENUMDOC
5188 Scenix IP2K - low/high 8 bits of instruction word address
5189 ENUM
5190 BFD_RELOC_IP2K_PC_SKIP
5191 ENUMDOC
5192 Scenix IP2K - even/odd PC modifier to modify snb pcl.0
5193 ENUM
5194 BFD_RELOC_IP2K_TEXT
5195 ENUMDOC
5196 Scenix IP2K - 16 bit word address in text section.
5197 ENUM
5198 BFD_RELOC_IP2K_FR_OFFSET
5199 ENUMDOC
5200 Scenix IP2K - 7-bit sp or dp offset
5201 ENUM
5202 BFD_RELOC_VPE4KMATH_DATA
5203 ENUMX
5204 BFD_RELOC_VPE4KMATH_INSN
5205 ENUMDOC
5206 Scenix VPE4K coprocessor - data/insn-space addressing
5207
5208 ENUM
5209 BFD_RELOC_VTABLE_INHERIT
5210 ENUMX
5211 BFD_RELOC_VTABLE_ENTRY
5212 ENUMDOC
5213 These two relocations are used by the linker to determine which of
5214 the entries in a C++ virtual function table are actually used. When
5215 the --gc-sections option is given, the linker will zero out the entries
5216 that are not used, so that the code for those functions need not be
5217 included in the output.
5218
5219 VTABLE_INHERIT is a zero-space relocation used to describe to the
5220 linker the inheritance tree of a C++ virtual function table. The
5221 relocation's symbol should be the parent class' vtable, and the
5222 relocation should be located at the child vtable.
5223
5224 VTABLE_ENTRY is a zero-space relocation that describes the use of a
5225 virtual function table entry. The reloc's symbol should refer to the
5226 table of the class mentioned in the code. Off of that base, an offset
5227 describes the entry that is being used. For Rela hosts, this offset
5228 is stored in the reloc's addend. For Rel hosts, we are forced to put
5229 this offset in the reloc's section offset.
5230
5231 ENUM
5232 BFD_RELOC_IA64_IMM14
5233 ENUMX
5234 BFD_RELOC_IA64_IMM22
5235 ENUMX
5236 BFD_RELOC_IA64_IMM64
5237 ENUMX
5238 BFD_RELOC_IA64_DIR32MSB
5239 ENUMX
5240 BFD_RELOC_IA64_DIR32LSB
5241 ENUMX
5242 BFD_RELOC_IA64_DIR64MSB
5243 ENUMX
5244 BFD_RELOC_IA64_DIR64LSB
5245 ENUMX
5246 BFD_RELOC_IA64_GPREL22
5247 ENUMX
5248 BFD_RELOC_IA64_GPREL64I
5249 ENUMX
5250 BFD_RELOC_IA64_GPREL32MSB
5251 ENUMX
5252 BFD_RELOC_IA64_GPREL32LSB
5253 ENUMX
5254 BFD_RELOC_IA64_GPREL64MSB
5255 ENUMX
5256 BFD_RELOC_IA64_GPREL64LSB
5257 ENUMX
5258 BFD_RELOC_IA64_LTOFF22
5259 ENUMX
5260 BFD_RELOC_IA64_LTOFF64I
5261 ENUMX
5262 BFD_RELOC_IA64_PLTOFF22
5263 ENUMX
5264 BFD_RELOC_IA64_PLTOFF64I
5265 ENUMX
5266 BFD_RELOC_IA64_PLTOFF64MSB
5267 ENUMX
5268 BFD_RELOC_IA64_PLTOFF64LSB
5269 ENUMX
5270 BFD_RELOC_IA64_FPTR64I
5271 ENUMX
5272 BFD_RELOC_IA64_FPTR32MSB
5273 ENUMX
5274 BFD_RELOC_IA64_FPTR32LSB
5275 ENUMX
5276 BFD_RELOC_IA64_FPTR64MSB
5277 ENUMX
5278 BFD_RELOC_IA64_FPTR64LSB
5279 ENUMX
5280 BFD_RELOC_IA64_PCREL21B
5281 ENUMX
5282 BFD_RELOC_IA64_PCREL21BI
5283 ENUMX
5284 BFD_RELOC_IA64_PCREL21M
5285 ENUMX
5286 BFD_RELOC_IA64_PCREL21F
5287 ENUMX
5288 BFD_RELOC_IA64_PCREL22
5289 ENUMX
5290 BFD_RELOC_IA64_PCREL60B
5291 ENUMX
5292 BFD_RELOC_IA64_PCREL64I
5293 ENUMX
5294 BFD_RELOC_IA64_PCREL32MSB
5295 ENUMX
5296 BFD_RELOC_IA64_PCREL32LSB
5297 ENUMX
5298 BFD_RELOC_IA64_PCREL64MSB
5299 ENUMX
5300 BFD_RELOC_IA64_PCREL64LSB
5301 ENUMX
5302 BFD_RELOC_IA64_LTOFF_FPTR22
5303 ENUMX
5304 BFD_RELOC_IA64_LTOFF_FPTR64I
5305 ENUMX
5306 BFD_RELOC_IA64_LTOFF_FPTR32MSB
5307 ENUMX
5308 BFD_RELOC_IA64_LTOFF_FPTR32LSB
5309 ENUMX
5310 BFD_RELOC_IA64_LTOFF_FPTR64MSB
5311 ENUMX
5312 BFD_RELOC_IA64_LTOFF_FPTR64LSB
5313 ENUMX
5314 BFD_RELOC_IA64_SEGREL32MSB
5315 ENUMX
5316 BFD_RELOC_IA64_SEGREL32LSB
5317 ENUMX
5318 BFD_RELOC_IA64_SEGREL64MSB
5319 ENUMX
5320 BFD_RELOC_IA64_SEGREL64LSB
5321 ENUMX
5322 BFD_RELOC_IA64_SECREL32MSB
5323 ENUMX
5324 BFD_RELOC_IA64_SECREL32LSB
5325 ENUMX
5326 BFD_RELOC_IA64_SECREL64MSB
5327 ENUMX
5328 BFD_RELOC_IA64_SECREL64LSB
5329 ENUMX
5330 BFD_RELOC_IA64_REL32MSB
5331 ENUMX
5332 BFD_RELOC_IA64_REL32LSB
5333 ENUMX
5334 BFD_RELOC_IA64_REL64MSB
5335 ENUMX
5336 BFD_RELOC_IA64_REL64LSB
5337 ENUMX
5338 BFD_RELOC_IA64_LTV32MSB
5339 ENUMX
5340 BFD_RELOC_IA64_LTV32LSB
5341 ENUMX
5342 BFD_RELOC_IA64_LTV64MSB
5343 ENUMX
5344 BFD_RELOC_IA64_LTV64LSB
5345 ENUMX
5346 BFD_RELOC_IA64_IPLTMSB
5347 ENUMX
5348 BFD_RELOC_IA64_IPLTLSB
5349 ENUMX
5350 BFD_RELOC_IA64_COPY
5351 ENUMX
5352 BFD_RELOC_IA64_LTOFF22X
5353 ENUMX
5354 BFD_RELOC_IA64_LDXMOV
5355 ENUMX
5356 BFD_RELOC_IA64_TPREL14
5357 ENUMX
5358 BFD_RELOC_IA64_TPREL22
5359 ENUMX
5360 BFD_RELOC_IA64_TPREL64I
5361 ENUMX
5362 BFD_RELOC_IA64_TPREL64MSB
5363 ENUMX
5364 BFD_RELOC_IA64_TPREL64LSB
5365 ENUMX
5366 BFD_RELOC_IA64_LTOFF_TPREL22
5367 ENUMX
5368 BFD_RELOC_IA64_DTPMOD64MSB
5369 ENUMX
5370 BFD_RELOC_IA64_DTPMOD64LSB
5371 ENUMX
5372 BFD_RELOC_IA64_LTOFF_DTPMOD22
5373 ENUMX
5374 BFD_RELOC_IA64_DTPREL14
5375 ENUMX
5376 BFD_RELOC_IA64_DTPREL22
5377 ENUMX
5378 BFD_RELOC_IA64_DTPREL64I
5379 ENUMX
5380 BFD_RELOC_IA64_DTPREL32MSB
5381 ENUMX
5382 BFD_RELOC_IA64_DTPREL32LSB
5383 ENUMX
5384 BFD_RELOC_IA64_DTPREL64MSB
5385 ENUMX
5386 BFD_RELOC_IA64_DTPREL64LSB
5387 ENUMX
5388 BFD_RELOC_IA64_LTOFF_DTPREL22
5389 ENUMDOC
5390 Intel IA64 Relocations.
5391
5392 ENUM
5393 BFD_RELOC_M68HC11_HI8
5394 ENUMDOC
5395 Motorola 68HC11 reloc.
5396 This is the 8 bit high part of an absolute address.
5397 ENUM
5398 BFD_RELOC_M68HC11_LO8
5399 ENUMDOC
5400 Motorola 68HC11 reloc.
5401 This is the 8 bit low part of an absolute address.
5402 ENUM
5403 BFD_RELOC_M68HC11_3B
5404 ENUMDOC
5405 Motorola 68HC11 reloc.
5406 This is the 3 bit of a value.
5407 ENUM
5408 BFD_RELOC_M68HC11_RL_JUMP
5409 ENUMDOC
5410 Motorola 68HC11 reloc.
5411 This reloc marks the beginning of a jump/call instruction.
5412 It is used for linker relaxation to correctly identify beginning
5413 of instruction and change some branches to use PC-relative
5414 addressing mode.
5415 ENUM
5416 BFD_RELOC_M68HC11_RL_GROUP
5417 ENUMDOC
5418 Motorola 68HC11 reloc.
5419 This reloc marks a group of several instructions that gcc generates
5420 and for which the linker relaxation pass can modify and/or remove
5421 some of them.
5422 ENUM
5423 BFD_RELOC_M68HC11_LO16
5424 ENUMDOC
5425 Motorola 68HC11 reloc.
5426 This is the 16-bit lower part of an address. It is used for 'call'
5427 instruction to specify the symbol address without any special
5428 transformation (due to memory bank window).
5429 ENUM
5430 BFD_RELOC_M68HC11_PAGE
5431 ENUMDOC
5432 Motorola 68HC11 reloc.
5433 This is a 8-bit reloc that specifies the page number of an address.
5434 It is used by 'call' instruction to specify the page number of
5435 the symbol.
5436 ENUM
5437 BFD_RELOC_M68HC11_24
5438 ENUMDOC
5439 Motorola 68HC11 reloc.
5440 This is a 24-bit reloc that represents the address with a 16-bit
5441 value and a 8-bit page number. The symbol address is transformed
5442 to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
5443 ENUM
5444 BFD_RELOC_M68HC12_5B
5445 ENUMDOC
5446 Motorola 68HC12 reloc.
5447 This is the 5 bits of a value.
5448 ENUM
5449 BFD_RELOC_XGATE_RL_JUMP
5450 ENUMDOC
5451 Freescale XGATE reloc.
5452 This reloc marks the beginning of a bra/jal instruction.
5453 ENUM
5454 BFD_RELOC_XGATE_RL_GROUP
5455 ENUMDOC
5456 Freescale XGATE reloc.
5457 This reloc marks a group of several instructions that gcc generates
5458 and for which the linker relaxation pass can modify and/or remove
5459 some of them.
5460 ENUM
5461 BFD_RELOC_XGATE_LO16
5462 ENUMDOC
5463 Freescale XGATE reloc.
5464 This is the 16-bit lower part of an address. It is used for the '16-bit'
5465 instructions.
5466 ENUM
5467 BFD_RELOC_XGATE_GPAGE
5468 ENUMDOC
5469 Freescale XGATE reloc.
5470 ENUM
5471 BFD_RELOC_XGATE_24
5472 ENUMDOC
5473 Freescale XGATE reloc.
5474 ENUM
5475 BFD_RELOC_XGATE_PCREL_9
5476 ENUMDOC
5477 Freescale XGATE reloc.
5478 This is a 9-bit pc-relative reloc.
5479 ENUM
5480 BFD_RELOC_XGATE_PCREL_10
5481 ENUMDOC
5482 Freescale XGATE reloc.
5483 This is a 10-bit pc-relative reloc.
5484 ENUM
5485 BFD_RELOC_XGATE_IMM8_LO
5486 ENUMDOC
5487 Freescale XGATE reloc.
5488 This is the 16-bit lower part of an address. It is used for the '16-bit'
5489 instructions.
5490 ENUM
5491 BFD_RELOC_XGATE_IMM8_HI
5492 ENUMDOC
5493 Freescale XGATE reloc.
5494 This is the 16-bit higher part of an address. It is used for the '16-bit'
5495 instructions.
5496 ENUM
5497 BFD_RELOC_XGATE_IMM3
5498 ENUMDOC
5499 Freescale XGATE reloc.
5500 This is a 3-bit pc-relative reloc.
5501 ENUM
5502 BFD_RELOC_XGATE_IMM4
5503 ENUMDOC
5504 Freescale XGATE reloc.
5505 This is a 4-bit pc-relative reloc.
5506 ENUM
5507 BFD_RELOC_XGATE_IMM5
5508 ENUMDOC
5509 Freescale XGATE reloc.
5510 This is a 5-bit pc-relative reloc.
5511 ENUM
5512 BFD_RELOC_M68HC12_9B
5513 ENUMDOC
5514 Motorola 68HC12 reloc.
5515 This is the 9 bits of a value.
5516 ENUM
5517 BFD_RELOC_M68HC12_16B
5518 ENUMDOC
5519 Motorola 68HC12 reloc.
5520 This is the 16 bits of a value.
5521 ENUM
5522 BFD_RELOC_M68HC12_9_PCREL
5523 ENUMDOC
5524 Motorola 68HC12/XGATE reloc.
5525 This is a PCREL9 branch.
5526 ENUM
5527 BFD_RELOC_M68HC12_10_PCREL
5528 ENUMDOC
5529 Motorola 68HC12/XGATE reloc.
5530 This is a PCREL10 branch.
5531 ENUM
5532 BFD_RELOC_M68HC12_LO8XG
5533 ENUMDOC
5534 Motorola 68HC12/XGATE reloc.
5535 This is the 8 bit low part of an absolute address and immediately precedes
5536 a matching HI8XG part.
5537 ENUM
5538 BFD_RELOC_M68HC12_HI8XG
5539 ENUMDOC
5540 Motorola 68HC12/XGATE reloc.
5541 This is the 8 bit high part of an absolute address and immediately follows
5542 a matching LO8XG part.
5543 ENUM
5544 BFD_RELOC_16C_NUM08
5545 ENUMX
5546 BFD_RELOC_16C_NUM08_C
5547 ENUMX
5548 BFD_RELOC_16C_NUM16
5549 ENUMX
5550 BFD_RELOC_16C_NUM16_C
5551 ENUMX
5552 BFD_RELOC_16C_NUM32
5553 ENUMX
5554 BFD_RELOC_16C_NUM32_C
5555 ENUMX
5556 BFD_RELOC_16C_DISP04
5557 ENUMX
5558 BFD_RELOC_16C_DISP04_C
5559 ENUMX
5560 BFD_RELOC_16C_DISP08
5561 ENUMX
5562 BFD_RELOC_16C_DISP08_C
5563 ENUMX
5564 BFD_RELOC_16C_DISP16
5565 ENUMX
5566 BFD_RELOC_16C_DISP16_C
5567 ENUMX
5568 BFD_RELOC_16C_DISP24
5569 ENUMX
5570 BFD_RELOC_16C_DISP24_C
5571 ENUMX
5572 BFD_RELOC_16C_DISP24a
5573 ENUMX
5574 BFD_RELOC_16C_DISP24a_C
5575 ENUMX
5576 BFD_RELOC_16C_REG04
5577 ENUMX
5578 BFD_RELOC_16C_REG04_C
5579 ENUMX
5580 BFD_RELOC_16C_REG04a
5581 ENUMX
5582 BFD_RELOC_16C_REG04a_C
5583 ENUMX
5584 BFD_RELOC_16C_REG14
5585 ENUMX
5586 BFD_RELOC_16C_REG14_C
5587 ENUMX
5588 BFD_RELOC_16C_REG16
5589 ENUMX
5590 BFD_RELOC_16C_REG16_C
5591 ENUMX
5592 BFD_RELOC_16C_REG20
5593 ENUMX
5594 BFD_RELOC_16C_REG20_C
5595 ENUMX
5596 BFD_RELOC_16C_ABS20
5597 ENUMX
5598 BFD_RELOC_16C_ABS20_C
5599 ENUMX
5600 BFD_RELOC_16C_ABS24
5601 ENUMX
5602 BFD_RELOC_16C_ABS24_C
5603 ENUMX
5604 BFD_RELOC_16C_IMM04
5605 ENUMX
5606 BFD_RELOC_16C_IMM04_C
5607 ENUMX
5608 BFD_RELOC_16C_IMM16
5609 ENUMX
5610 BFD_RELOC_16C_IMM16_C
5611 ENUMX
5612 BFD_RELOC_16C_IMM20
5613 ENUMX
5614 BFD_RELOC_16C_IMM20_C
5615 ENUMX
5616 BFD_RELOC_16C_IMM24
5617 ENUMX
5618 BFD_RELOC_16C_IMM24_C
5619 ENUMX
5620 BFD_RELOC_16C_IMM32
5621 ENUMX
5622 BFD_RELOC_16C_IMM32_C
5623 ENUMDOC
5624 NS CR16C Relocations.
5625
5626 ENUM
5627 BFD_RELOC_CR16_NUM8
5628 ENUMX
5629 BFD_RELOC_CR16_NUM16
5630 ENUMX
5631 BFD_RELOC_CR16_NUM32
5632 ENUMX
5633 BFD_RELOC_CR16_NUM32a
5634 ENUMX
5635 BFD_RELOC_CR16_REGREL0
5636 ENUMX
5637 BFD_RELOC_CR16_REGREL4
5638 ENUMX
5639 BFD_RELOC_CR16_REGREL4a
5640 ENUMX
5641 BFD_RELOC_CR16_REGREL14
5642 ENUMX
5643 BFD_RELOC_CR16_REGREL14a
5644 ENUMX
5645 BFD_RELOC_CR16_REGREL16
5646 ENUMX
5647 BFD_RELOC_CR16_REGREL20
5648 ENUMX
5649 BFD_RELOC_CR16_REGREL20a
5650 ENUMX
5651 BFD_RELOC_CR16_ABS20
5652 ENUMX
5653 BFD_RELOC_CR16_ABS24
5654 ENUMX
5655 BFD_RELOC_CR16_IMM4
5656 ENUMX
5657 BFD_RELOC_CR16_IMM8
5658 ENUMX
5659 BFD_RELOC_CR16_IMM16
5660 ENUMX
5661 BFD_RELOC_CR16_IMM20
5662 ENUMX
5663 BFD_RELOC_CR16_IMM24
5664 ENUMX
5665 BFD_RELOC_CR16_IMM32
5666 ENUMX
5667 BFD_RELOC_CR16_IMM32a
5668 ENUMX
5669 BFD_RELOC_CR16_DISP4
5670 ENUMX
5671 BFD_RELOC_CR16_DISP8
5672 ENUMX
5673 BFD_RELOC_CR16_DISP16
5674 ENUMX
5675 BFD_RELOC_CR16_DISP20
5676 ENUMX
5677 BFD_RELOC_CR16_DISP24
5678 ENUMX
5679 BFD_RELOC_CR16_DISP24a
5680 ENUMX
5681 BFD_RELOC_CR16_SWITCH8
5682 ENUMX
5683 BFD_RELOC_CR16_SWITCH16
5684 ENUMX
5685 BFD_RELOC_CR16_SWITCH32
5686 ENUMX
5687 BFD_RELOC_CR16_GOT_REGREL20
5688 ENUMX
5689 BFD_RELOC_CR16_GOTC_REGREL20
5690 ENUMX
5691 BFD_RELOC_CR16_GLOB_DAT
5692 ENUMDOC
5693 NS CR16 Relocations.
5694
5695 ENUM
5696 BFD_RELOC_CRX_REL4
5697 ENUMX
5698 BFD_RELOC_CRX_REL8
5699 ENUMX
5700 BFD_RELOC_CRX_REL8_CMP
5701 ENUMX
5702 BFD_RELOC_CRX_REL16
5703 ENUMX
5704 BFD_RELOC_CRX_REL24
5705 ENUMX
5706 BFD_RELOC_CRX_REL32
5707 ENUMX
5708 BFD_RELOC_CRX_REGREL12
5709 ENUMX
5710 BFD_RELOC_CRX_REGREL22
5711 ENUMX
5712 BFD_RELOC_CRX_REGREL28
5713 ENUMX
5714 BFD_RELOC_CRX_REGREL32
5715 ENUMX
5716 BFD_RELOC_CRX_ABS16
5717 ENUMX
5718 BFD_RELOC_CRX_ABS32
5719 ENUMX
5720 BFD_RELOC_CRX_NUM8
5721 ENUMX
5722 BFD_RELOC_CRX_NUM16
5723 ENUMX
5724 BFD_RELOC_CRX_NUM32
5725 ENUMX
5726 BFD_RELOC_CRX_IMM16
5727 ENUMX
5728 BFD_RELOC_CRX_IMM32
5729 ENUMX
5730 BFD_RELOC_CRX_SWITCH8
5731 ENUMX
5732 BFD_RELOC_CRX_SWITCH16
5733 ENUMX
5734 BFD_RELOC_CRX_SWITCH32
5735 ENUMDOC
5736 NS CRX Relocations.
5737
5738 ENUM
5739 BFD_RELOC_CRIS_BDISP8
5740 ENUMX
5741 BFD_RELOC_CRIS_UNSIGNED_5
5742 ENUMX
5743 BFD_RELOC_CRIS_SIGNED_6
5744 ENUMX
5745 BFD_RELOC_CRIS_UNSIGNED_6
5746 ENUMX
5747 BFD_RELOC_CRIS_SIGNED_8
5748 ENUMX
5749 BFD_RELOC_CRIS_UNSIGNED_8
5750 ENUMX
5751 BFD_RELOC_CRIS_SIGNED_16
5752 ENUMX
5753 BFD_RELOC_CRIS_UNSIGNED_16
5754 ENUMX
5755 BFD_RELOC_CRIS_LAPCQ_OFFSET
5756 ENUMX
5757 BFD_RELOC_CRIS_UNSIGNED_4
5758 ENUMDOC
5759 These relocs are only used within the CRIS assembler. They are not
5760 (at present) written to any object files.
5761 ENUM
5762 BFD_RELOC_CRIS_COPY
5763 ENUMX
5764 BFD_RELOC_CRIS_GLOB_DAT
5765 ENUMX
5766 BFD_RELOC_CRIS_JUMP_SLOT
5767 ENUMX
5768 BFD_RELOC_CRIS_RELATIVE
5769 ENUMDOC
5770 Relocs used in ELF shared libraries for CRIS.
5771 ENUM
5772 BFD_RELOC_CRIS_32_GOT
5773 ENUMDOC
5774 32-bit offset to symbol-entry within GOT.
5775 ENUM
5776 BFD_RELOC_CRIS_16_GOT
5777 ENUMDOC
5778 16-bit offset to symbol-entry within GOT.
5779 ENUM
5780 BFD_RELOC_CRIS_32_GOTPLT
5781 ENUMDOC
5782 32-bit offset to symbol-entry within GOT, with PLT handling.
5783 ENUM
5784 BFD_RELOC_CRIS_16_GOTPLT
5785 ENUMDOC
5786 16-bit offset to symbol-entry within GOT, with PLT handling.
5787 ENUM
5788 BFD_RELOC_CRIS_32_GOTREL
5789 ENUMDOC
5790 32-bit offset to symbol, relative to GOT.
5791 ENUM
5792 BFD_RELOC_CRIS_32_PLT_GOTREL
5793 ENUMDOC
5794 32-bit offset to symbol with PLT entry, relative to GOT.
5795 ENUM
5796 BFD_RELOC_CRIS_32_PLT_PCREL
5797 ENUMDOC
5798 32-bit offset to symbol with PLT entry, relative to this relocation.
5799
5800 ENUM
5801 BFD_RELOC_CRIS_32_GOT_GD
5802 ENUMX
5803 BFD_RELOC_CRIS_16_GOT_GD
5804 ENUMX
5805 BFD_RELOC_CRIS_32_GD
5806 ENUMX
5807 BFD_RELOC_CRIS_DTP
5808 ENUMX
5809 BFD_RELOC_CRIS_32_DTPREL
5810 ENUMX
5811 BFD_RELOC_CRIS_16_DTPREL
5812 ENUMX
5813 BFD_RELOC_CRIS_32_GOT_TPREL
5814 ENUMX
5815 BFD_RELOC_CRIS_16_GOT_TPREL
5816 ENUMX
5817 BFD_RELOC_CRIS_32_TPREL
5818 ENUMX
5819 BFD_RELOC_CRIS_16_TPREL
5820 ENUMX
5821 BFD_RELOC_CRIS_DTPMOD
5822 ENUMX
5823 BFD_RELOC_CRIS_32_IE
5824 ENUMDOC
5825 Relocs used in TLS code for CRIS.
5826
5827 ENUM
5828 BFD_RELOC_860_COPY
5829 ENUMX
5830 BFD_RELOC_860_GLOB_DAT
5831 ENUMX
5832 BFD_RELOC_860_JUMP_SLOT
5833 ENUMX
5834 BFD_RELOC_860_RELATIVE
5835 ENUMX
5836 BFD_RELOC_860_PC26
5837 ENUMX
5838 BFD_RELOC_860_PLT26
5839 ENUMX
5840 BFD_RELOC_860_PC16
5841 ENUMX
5842 BFD_RELOC_860_LOW0
5843 ENUMX
5844 BFD_RELOC_860_SPLIT0
5845 ENUMX
5846 BFD_RELOC_860_LOW1
5847 ENUMX
5848 BFD_RELOC_860_SPLIT1
5849 ENUMX
5850 BFD_RELOC_860_LOW2
5851 ENUMX
5852 BFD_RELOC_860_SPLIT2
5853 ENUMX
5854 BFD_RELOC_860_LOW3
5855 ENUMX
5856 BFD_RELOC_860_LOGOT0
5857 ENUMX
5858 BFD_RELOC_860_SPGOT0
5859 ENUMX
5860 BFD_RELOC_860_LOGOT1
5861 ENUMX
5862 BFD_RELOC_860_SPGOT1
5863 ENUMX
5864 BFD_RELOC_860_LOGOTOFF0
5865 ENUMX
5866 BFD_RELOC_860_SPGOTOFF0
5867 ENUMX
5868 BFD_RELOC_860_LOGOTOFF1
5869 ENUMX
5870 BFD_RELOC_860_SPGOTOFF1
5871 ENUMX
5872 BFD_RELOC_860_LOGOTOFF2
5873 ENUMX
5874 BFD_RELOC_860_LOGOTOFF3
5875 ENUMX
5876 BFD_RELOC_860_LOPC
5877 ENUMX
5878 BFD_RELOC_860_HIGHADJ
5879 ENUMX
5880 BFD_RELOC_860_HAGOT
5881 ENUMX
5882 BFD_RELOC_860_HAGOTOFF
5883 ENUMX
5884 BFD_RELOC_860_HAPC
5885 ENUMX
5886 BFD_RELOC_860_HIGH
5887 ENUMX
5888 BFD_RELOC_860_HIGOT
5889 ENUMX
5890 BFD_RELOC_860_HIGOTOFF
5891 ENUMDOC
5892 Intel i860 Relocations.
5893
5894 ENUM
5895 BFD_RELOC_OR1K_REL_26
5896 ENUMX
5897 BFD_RELOC_OR1K_GOTPC_HI16
5898 ENUMX
5899 BFD_RELOC_OR1K_GOTPC_LO16
5900 ENUMX
5901 BFD_RELOC_OR1K_GOT16
5902 ENUMX
5903 BFD_RELOC_OR1K_PLT26
5904 ENUMX
5905 BFD_RELOC_OR1K_GOTOFF_HI16
5906 ENUMX
5907 BFD_RELOC_OR1K_GOTOFF_LO16
5908 ENUMX
5909 BFD_RELOC_OR1K_COPY
5910 ENUMX
5911 BFD_RELOC_OR1K_GLOB_DAT
5912 ENUMX
5913 BFD_RELOC_OR1K_JMP_SLOT
5914 ENUMX
5915 BFD_RELOC_OR1K_RELATIVE
5916 ENUMX
5917 BFD_RELOC_OR1K_TLS_GD_HI16
5918 ENUMX
5919 BFD_RELOC_OR1K_TLS_GD_LO16
5920 ENUMX
5921 BFD_RELOC_OR1K_TLS_LDM_HI16
5922 ENUMX
5923 BFD_RELOC_OR1K_TLS_LDM_LO16
5924 ENUMX
5925 BFD_RELOC_OR1K_TLS_LDO_HI16
5926 ENUMX
5927 BFD_RELOC_OR1K_TLS_LDO_LO16
5928 ENUMX
5929 BFD_RELOC_OR1K_TLS_IE_HI16
5930 ENUMX
5931 BFD_RELOC_OR1K_TLS_IE_LO16
5932 ENUMX
5933 BFD_RELOC_OR1K_TLS_LE_HI16
5934 ENUMX
5935 BFD_RELOC_OR1K_TLS_LE_LO16
5936 ENUMX
5937 BFD_RELOC_OR1K_TLS_TPOFF
5938 ENUMX
5939 BFD_RELOC_OR1K_TLS_DTPOFF
5940 ENUMX
5941 BFD_RELOC_OR1K_TLS_DTPMOD
5942 ENUMDOC
5943 OpenRISC 1000 Relocations.
5944
5945 ENUM
5946 BFD_RELOC_H8_DIR16A8
5947 ENUMX
5948 BFD_RELOC_H8_DIR16R8
5949 ENUMX
5950 BFD_RELOC_H8_DIR24A8
5951 ENUMX
5952 BFD_RELOC_H8_DIR24R8
5953 ENUMX
5954 BFD_RELOC_H8_DIR32A16
5955 ENUMX
5956 BFD_RELOC_H8_DISP32A16
5957 ENUMDOC
5958 H8 elf Relocations.
5959
5960 ENUM
5961 BFD_RELOC_XSTORMY16_REL_12
5962 ENUMX
5963 BFD_RELOC_XSTORMY16_12
5964 ENUMX
5965 BFD_RELOC_XSTORMY16_24
5966 ENUMX
5967 BFD_RELOC_XSTORMY16_FPTR16
5968 ENUMDOC
5969 Sony Xstormy16 Relocations.
5970
5971 ENUM
5972 BFD_RELOC_RELC
5973 ENUMDOC
5974 Self-describing complex relocations.
5975 COMMENT
5976
5977 ENUM
5978 BFD_RELOC_XC16X_PAG
5979 ENUMX
5980 BFD_RELOC_XC16X_POF
5981 ENUMX
5982 BFD_RELOC_XC16X_SEG
5983 ENUMX
5984 BFD_RELOC_XC16X_SOF
5985 ENUMDOC
5986 Infineon Relocations.
5987
5988 ENUM
5989 BFD_RELOC_VAX_GLOB_DAT
5990 ENUMX
5991 BFD_RELOC_VAX_JMP_SLOT
5992 ENUMX
5993 BFD_RELOC_VAX_RELATIVE
5994 ENUMDOC
5995 Relocations used by VAX ELF.
5996
5997 ENUM
5998 BFD_RELOC_MT_PC16
5999 ENUMDOC
6000 Morpho MT - 16 bit immediate relocation.
6001 ENUM
6002 BFD_RELOC_MT_HI16
6003 ENUMDOC
6004 Morpho MT - Hi 16 bits of an address.
6005 ENUM
6006 BFD_RELOC_MT_LO16
6007 ENUMDOC
6008 Morpho MT - Low 16 bits of an address.
6009 ENUM
6010 BFD_RELOC_MT_GNU_VTINHERIT
6011 ENUMDOC
6012 Morpho MT - Used to tell the linker which vtable entries are used.
6013 ENUM
6014 BFD_RELOC_MT_GNU_VTENTRY
6015 ENUMDOC
6016 Morpho MT - Used to tell the linker which vtable entries are used.
6017 ENUM
6018 BFD_RELOC_MT_PCINSN8
6019 ENUMDOC
6020 Morpho MT - 8 bit immediate relocation.
6021
6022 ENUM
6023 BFD_RELOC_MSP430_10_PCREL
6024 ENUMX
6025 BFD_RELOC_MSP430_16_PCREL
6026 ENUMX
6027 BFD_RELOC_MSP430_16
6028 ENUMX
6029 BFD_RELOC_MSP430_16_PCREL_BYTE
6030 ENUMX
6031 BFD_RELOC_MSP430_16_BYTE
6032 ENUMX
6033 BFD_RELOC_MSP430_2X_PCREL
6034 ENUMX
6035 BFD_RELOC_MSP430_RL_PCREL
6036 ENUMX
6037 BFD_RELOC_MSP430_ABS8
6038 ENUMX
6039 BFD_RELOC_MSP430X_PCR20_EXT_SRC
6040 ENUMX
6041 BFD_RELOC_MSP430X_PCR20_EXT_DST
6042 ENUMX
6043 BFD_RELOC_MSP430X_PCR20_EXT_ODST
6044 ENUMX
6045 BFD_RELOC_MSP430X_ABS20_EXT_SRC
6046 ENUMX
6047 BFD_RELOC_MSP430X_ABS20_EXT_DST
6048 ENUMX
6049 BFD_RELOC_MSP430X_ABS20_EXT_ODST
6050 ENUMX
6051 BFD_RELOC_MSP430X_ABS20_ADR_SRC
6052 ENUMX
6053 BFD_RELOC_MSP430X_ABS20_ADR_DST
6054 ENUMX
6055 BFD_RELOC_MSP430X_PCR16
6056 ENUMX
6057 BFD_RELOC_MSP430X_PCR20_CALL
6058 ENUMX
6059 BFD_RELOC_MSP430X_ABS16
6060 ENUMX
6061 BFD_RELOC_MSP430_ABS_HI16
6062 ENUMX
6063 BFD_RELOC_MSP430_PREL31
6064 ENUMX
6065 BFD_RELOC_MSP430_SYM_DIFF
6066 ENUMDOC
6067 msp430 specific relocation codes
6068
6069 ENUM
6070 BFD_RELOC_NIOS2_S16
6071 ENUMX
6072 BFD_RELOC_NIOS2_U16
6073 ENUMX
6074 BFD_RELOC_NIOS2_CALL26
6075 ENUMX
6076 BFD_RELOC_NIOS2_IMM5
6077 ENUMX
6078 BFD_RELOC_NIOS2_CACHE_OPX
6079 ENUMX
6080 BFD_RELOC_NIOS2_IMM6
6081 ENUMX
6082 BFD_RELOC_NIOS2_IMM8
6083 ENUMX
6084 BFD_RELOC_NIOS2_HI16
6085 ENUMX
6086 BFD_RELOC_NIOS2_LO16
6087 ENUMX
6088 BFD_RELOC_NIOS2_HIADJ16
6089 ENUMX
6090 BFD_RELOC_NIOS2_GPREL
6091 ENUMX
6092 BFD_RELOC_NIOS2_UJMP
6093 ENUMX
6094 BFD_RELOC_NIOS2_CJMP
6095 ENUMX
6096 BFD_RELOC_NIOS2_CALLR
6097 ENUMX
6098 BFD_RELOC_NIOS2_ALIGN
6099 ENUMX
6100 BFD_RELOC_NIOS2_GOT16
6101 ENUMX
6102 BFD_RELOC_NIOS2_CALL16
6103 ENUMX
6104 BFD_RELOC_NIOS2_GOTOFF_LO
6105 ENUMX
6106 BFD_RELOC_NIOS2_GOTOFF_HA
6107 ENUMX
6108 BFD_RELOC_NIOS2_PCREL_LO
6109 ENUMX
6110 BFD_RELOC_NIOS2_PCREL_HA
6111 ENUMX
6112 BFD_RELOC_NIOS2_TLS_GD16
6113 ENUMX
6114 BFD_RELOC_NIOS2_TLS_LDM16
6115 ENUMX
6116 BFD_RELOC_NIOS2_TLS_LDO16
6117 ENUMX
6118 BFD_RELOC_NIOS2_TLS_IE16
6119 ENUMX
6120 BFD_RELOC_NIOS2_TLS_LE16
6121 ENUMX
6122 BFD_RELOC_NIOS2_TLS_DTPMOD
6123 ENUMX
6124 BFD_RELOC_NIOS2_TLS_DTPREL
6125 ENUMX
6126 BFD_RELOC_NIOS2_TLS_TPREL
6127 ENUMX
6128 BFD_RELOC_NIOS2_COPY
6129 ENUMX
6130 BFD_RELOC_NIOS2_GLOB_DAT
6131 ENUMX
6132 BFD_RELOC_NIOS2_JUMP_SLOT
6133 ENUMX
6134 BFD_RELOC_NIOS2_RELATIVE
6135 ENUMX
6136 BFD_RELOC_NIOS2_GOTOFF
6137 ENUMX
6138 BFD_RELOC_NIOS2_CALL26_NOAT
6139 ENUMX
6140 BFD_RELOC_NIOS2_GOT_LO
6141 ENUMX
6142 BFD_RELOC_NIOS2_GOT_HA
6143 ENUMX
6144 BFD_RELOC_NIOS2_CALL_LO
6145 ENUMX
6146 BFD_RELOC_NIOS2_CALL_HA
6147 ENUMDOC
6148 Relocations used by the Altera Nios II core.
6149
6150 ENUM
6151 BFD_RELOC_IQ2000_OFFSET_16
6152 ENUMX
6153 BFD_RELOC_IQ2000_OFFSET_21
6154 ENUMX
6155 BFD_RELOC_IQ2000_UHI16
6156 ENUMDOC
6157 IQ2000 Relocations.
6158
6159 ENUM
6160 BFD_RELOC_XTENSA_RTLD
6161 ENUMDOC
6162 Special Xtensa relocation used only by PLT entries in ELF shared
6163 objects to indicate that the runtime linker should set the value
6164 to one of its own internal functions or data structures.
6165 ENUM
6166 BFD_RELOC_XTENSA_GLOB_DAT
6167 ENUMX
6168 BFD_RELOC_XTENSA_JMP_SLOT
6169 ENUMX
6170 BFD_RELOC_XTENSA_RELATIVE
6171 ENUMDOC
6172 Xtensa relocations for ELF shared objects.
6173 ENUM
6174 BFD_RELOC_XTENSA_PLT
6175 ENUMDOC
6176 Xtensa relocation used in ELF object files for symbols that may require
6177 PLT entries. Otherwise, this is just a generic 32-bit relocation.
6178 ENUM
6179 BFD_RELOC_XTENSA_DIFF8
6180 ENUMX
6181 BFD_RELOC_XTENSA_DIFF16
6182 ENUMX
6183 BFD_RELOC_XTENSA_DIFF32
6184 ENUMDOC
6185 Xtensa relocations to mark the difference of two local symbols.
6186 These are only needed to support linker relaxation and can be ignored
6187 when not relaxing. The field is set to the value of the difference
6188 assuming no relaxation. The relocation encodes the position of the
6189 first symbol so the linker can determine whether to adjust the field
6190 value.
6191 ENUM
6192 BFD_RELOC_XTENSA_SLOT0_OP
6193 ENUMX
6194 BFD_RELOC_XTENSA_SLOT1_OP
6195 ENUMX
6196 BFD_RELOC_XTENSA_SLOT2_OP
6197 ENUMX
6198 BFD_RELOC_XTENSA_SLOT3_OP
6199 ENUMX
6200 BFD_RELOC_XTENSA_SLOT4_OP
6201 ENUMX
6202 BFD_RELOC_XTENSA_SLOT5_OP
6203 ENUMX
6204 BFD_RELOC_XTENSA_SLOT6_OP
6205 ENUMX
6206 BFD_RELOC_XTENSA_SLOT7_OP
6207 ENUMX
6208 BFD_RELOC_XTENSA_SLOT8_OP
6209 ENUMX
6210 BFD_RELOC_XTENSA_SLOT9_OP
6211 ENUMX
6212 BFD_RELOC_XTENSA_SLOT10_OP
6213 ENUMX
6214 BFD_RELOC_XTENSA_SLOT11_OP
6215 ENUMX
6216 BFD_RELOC_XTENSA_SLOT12_OP
6217 ENUMX
6218 BFD_RELOC_XTENSA_SLOT13_OP
6219 ENUMX
6220 BFD_RELOC_XTENSA_SLOT14_OP
6221 ENUMDOC
6222 Generic Xtensa relocations for instruction operands. Only the slot
6223 number is encoded in the relocation. The relocation applies to the
6224 last PC-relative immediate operand, or if there are no PC-relative
6225 immediates, to the last immediate operand.
6226 ENUM
6227 BFD_RELOC_XTENSA_SLOT0_ALT
6228 ENUMX
6229 BFD_RELOC_XTENSA_SLOT1_ALT
6230 ENUMX
6231 BFD_RELOC_XTENSA_SLOT2_ALT
6232 ENUMX
6233 BFD_RELOC_XTENSA_SLOT3_ALT
6234 ENUMX
6235 BFD_RELOC_XTENSA_SLOT4_ALT
6236 ENUMX
6237 BFD_RELOC_XTENSA_SLOT5_ALT
6238 ENUMX
6239 BFD_RELOC_XTENSA_SLOT6_ALT
6240 ENUMX
6241 BFD_RELOC_XTENSA_SLOT7_ALT
6242 ENUMX
6243 BFD_RELOC_XTENSA_SLOT8_ALT
6244 ENUMX
6245 BFD_RELOC_XTENSA_SLOT9_ALT
6246 ENUMX
6247 BFD_RELOC_XTENSA_SLOT10_ALT
6248 ENUMX
6249 BFD_RELOC_XTENSA_SLOT11_ALT
6250 ENUMX
6251 BFD_RELOC_XTENSA_SLOT12_ALT
6252 ENUMX
6253 BFD_RELOC_XTENSA_SLOT13_ALT
6254 ENUMX
6255 BFD_RELOC_XTENSA_SLOT14_ALT
6256 ENUMDOC
6257 Alternate Xtensa relocations. Only the slot is encoded in the
6258 relocation. The meaning of these relocations is opcode-specific.
6259 ENUM
6260 BFD_RELOC_XTENSA_OP0
6261 ENUMX
6262 BFD_RELOC_XTENSA_OP1
6263 ENUMX
6264 BFD_RELOC_XTENSA_OP2
6265 ENUMDOC
6266 Xtensa relocations for backward compatibility. These have all been
6267 replaced by BFD_RELOC_XTENSA_SLOT0_OP.
6268 ENUM
6269 BFD_RELOC_XTENSA_ASM_EXPAND
6270 ENUMDOC
6271 Xtensa relocation to mark that the assembler expanded the
6272 instructions from an original target. The expansion size is
6273 encoded in the reloc size.
6274 ENUM
6275 BFD_RELOC_XTENSA_ASM_SIMPLIFY
6276 ENUMDOC
6277 Xtensa relocation to mark that the linker should simplify
6278 assembler-expanded instructions. This is commonly used
6279 internally by the linker after analysis of a
6280 BFD_RELOC_XTENSA_ASM_EXPAND.
6281 ENUM
6282 BFD_RELOC_XTENSA_TLSDESC_FN
6283 ENUMX
6284 BFD_RELOC_XTENSA_TLSDESC_ARG
6285 ENUMX
6286 BFD_RELOC_XTENSA_TLS_DTPOFF
6287 ENUMX
6288 BFD_RELOC_XTENSA_TLS_TPOFF
6289 ENUMX
6290 BFD_RELOC_XTENSA_TLS_FUNC
6291 ENUMX
6292 BFD_RELOC_XTENSA_TLS_ARG
6293 ENUMX
6294 BFD_RELOC_XTENSA_TLS_CALL
6295 ENUMDOC
6296 Xtensa TLS relocations.
6297
6298 ENUM
6299 BFD_RELOC_Z80_DISP8
6300 ENUMDOC
6301 8 bit signed offset in (ix+d) or (iy+d).
6302
6303 ENUM
6304 BFD_RELOC_Z8K_DISP7
6305 ENUMDOC
6306 DJNZ offset.
6307 ENUM
6308 BFD_RELOC_Z8K_CALLR
6309 ENUMDOC
6310 CALR offset.
6311 ENUM
6312 BFD_RELOC_Z8K_IMM4L
6313 ENUMDOC
6314 4 bit value.
6315
6316 ENUM
6317 BFD_RELOC_LM32_CALL
6318 ENUMX
6319 BFD_RELOC_LM32_BRANCH
6320 ENUMX
6321 BFD_RELOC_LM32_16_GOT
6322 ENUMX
6323 BFD_RELOC_LM32_GOTOFF_HI16
6324 ENUMX
6325 BFD_RELOC_LM32_GOTOFF_LO16
6326 ENUMX
6327 BFD_RELOC_LM32_COPY
6328 ENUMX
6329 BFD_RELOC_LM32_GLOB_DAT
6330 ENUMX
6331 BFD_RELOC_LM32_JMP_SLOT
6332 ENUMX
6333 BFD_RELOC_LM32_RELATIVE
6334 ENUMDOC
6335 Lattice Mico32 relocations.
6336
6337 ENUM
6338 BFD_RELOC_MACH_O_SECTDIFF
6339 ENUMDOC
6340 Difference between two section addreses. Must be followed by a
6341 BFD_RELOC_MACH_O_PAIR.
6342 ENUM
6343 BFD_RELOC_MACH_O_LOCAL_SECTDIFF
6344 ENUMDOC
6345 Like BFD_RELOC_MACH_O_SECTDIFF but with a local symbol.
6346 ENUM
6347 BFD_RELOC_MACH_O_PAIR
6348 ENUMDOC
6349 Pair of relocation. Contains the first symbol.
6350
6351 ENUM
6352 BFD_RELOC_MACH_O_X86_64_BRANCH32
6353 ENUMX
6354 BFD_RELOC_MACH_O_X86_64_BRANCH8
6355 ENUMDOC
6356 PCREL relocations. They are marked as branch to create PLT entry if
6357 required.
6358 ENUM
6359 BFD_RELOC_MACH_O_X86_64_GOT
6360 ENUMDOC
6361 Used when referencing a GOT entry.
6362 ENUM
6363 BFD_RELOC_MACH_O_X86_64_GOT_LOAD
6364 ENUMDOC
6365 Used when loading a GOT entry with movq. It is specially marked so that
6366 the linker could optimize the movq to a leaq if possible.
6367 ENUM
6368 BFD_RELOC_MACH_O_X86_64_SUBTRACTOR32
6369 ENUMDOC
6370 Symbol will be substracted. Must be followed by a BFD_RELOC_64.
6371 ENUM
6372 BFD_RELOC_MACH_O_X86_64_SUBTRACTOR64
6373 ENUMDOC
6374 Symbol will be substracted. Must be followed by a BFD_RELOC_64.
6375 ENUM
6376 BFD_RELOC_MACH_O_X86_64_PCREL32_1
6377 ENUMDOC
6378 Same as BFD_RELOC_32_PCREL but with an implicit -1 addend.
6379 ENUM
6380 BFD_RELOC_MACH_O_X86_64_PCREL32_2
6381 ENUMDOC
6382 Same as BFD_RELOC_32_PCREL but with an implicit -2 addend.
6383 ENUM
6384 BFD_RELOC_MACH_O_X86_64_PCREL32_4
6385 ENUMDOC
6386 Same as BFD_RELOC_32_PCREL but with an implicit -4 addend.
6387
6388 ENUM
6389 BFD_RELOC_MICROBLAZE_32_LO
6390 ENUMDOC
6391 This is a 32 bit reloc for the microblaze that stores the
6392 low 16 bits of a value
6393 ENUM
6394 BFD_RELOC_MICROBLAZE_32_LO_PCREL
6395 ENUMDOC
6396 This is a 32 bit pc-relative reloc for the microblaze that
6397 stores the low 16 bits of a value
6398 ENUM
6399 BFD_RELOC_MICROBLAZE_32_ROSDA
6400 ENUMDOC
6401 This is a 32 bit reloc for the microblaze that stores a
6402 value relative to the read-only small data area anchor
6403 ENUM
6404 BFD_RELOC_MICROBLAZE_32_RWSDA
6405 ENUMDOC
6406 This is a 32 bit reloc for the microblaze that stores a
6407 value relative to the read-write small data area anchor
6408 ENUM
6409 BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM
6410 ENUMDOC
6411 This is a 32 bit reloc for the microblaze to handle
6412 expressions of the form "Symbol Op Symbol"
6413 ENUM
6414 BFD_RELOC_MICROBLAZE_64_NONE
6415 ENUMDOC
6416 This is a 64 bit reloc that stores the 32 bit pc relative
6417 value in two words (with an imm instruction). No relocation is
6418 done here - only used for relaxing
6419 ENUM
6420 BFD_RELOC_MICROBLAZE_64_GOTPC
6421 ENUMDOC
6422 This is a 64 bit reloc that stores the 32 bit pc relative
6423 value in two words (with an imm instruction). The relocation is
6424 PC-relative GOT offset
6425 ENUM
6426 BFD_RELOC_MICROBLAZE_64_GOT
6427 ENUMDOC
6428 This is a 64 bit reloc that stores the 32 bit pc relative
6429 value in two words (with an imm instruction). The relocation is
6430 GOT offset
6431 ENUM
6432 BFD_RELOC_MICROBLAZE_64_PLT
6433 ENUMDOC
6434 This is a 64 bit reloc that stores the 32 bit pc relative
6435 value in two words (with an imm instruction). The relocation is
6436 PC-relative offset into PLT
6437 ENUM
6438 BFD_RELOC_MICROBLAZE_64_GOTOFF
6439 ENUMDOC
6440 This is a 64 bit reloc that stores the 32 bit GOT relative
6441 value in two words (with an imm instruction). The relocation is
6442 relative offset from _GLOBAL_OFFSET_TABLE_
6443 ENUM
6444 BFD_RELOC_MICROBLAZE_32_GOTOFF
6445 ENUMDOC
6446 This is a 32 bit reloc that stores the 32 bit GOT relative
6447 value in a word. The relocation is relative offset from
6448 _GLOBAL_OFFSET_TABLE_
6449 ENUM
6450 BFD_RELOC_MICROBLAZE_COPY
6451 ENUMDOC
6452 This is used to tell the dynamic linker to copy the value out of
6453 the dynamic object into the runtime process image.
6454 ENUM
6455 BFD_RELOC_MICROBLAZE_64_TLS
6456 ENUMDOC
6457 Unused Reloc
6458 ENUM
6459 BFD_RELOC_MICROBLAZE_64_TLSGD
6460 ENUMDOC
6461 This is a 64 bit reloc that stores the 32 bit GOT relative value
6462 of the GOT TLS GD info entry in two words (with an imm instruction). The
6463 relocation is GOT offset.
6464 ENUM
6465 BFD_RELOC_MICROBLAZE_64_TLSLD
6466 ENUMDOC
6467 This is a 64 bit reloc that stores the 32 bit GOT relative value
6468 of the GOT TLS LD info entry in two words (with an imm instruction). The
6469 relocation is GOT offset.
6470 ENUM
6471 BFD_RELOC_MICROBLAZE_32_TLSDTPMOD
6472 ENUMDOC
6473 This is a 32 bit reloc that stores the Module ID to GOT(n).
6474 ENUM
6475 BFD_RELOC_MICROBLAZE_32_TLSDTPREL
6476 ENUMDOC
6477 This is a 32 bit reloc that stores TLS offset to GOT(n+1).
6478 ENUM
6479 BFD_RELOC_MICROBLAZE_64_TLSDTPREL
6480 ENUMDOC
6481 This is a 32 bit reloc for storing TLS offset to two words (uses imm
6482 instruction)
6483 ENUM
6484 BFD_RELOC_MICROBLAZE_64_TLSGOTTPREL
6485 ENUMDOC
6486 This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6487 to two words (uses imm instruction).
6488 ENUM
6489 BFD_RELOC_MICROBLAZE_64_TLSTPREL
6490 ENUMDOC
6491 This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6492 to two words (uses imm instruction).
6493
6494 ENUM
6495 BFD_RELOC_AARCH64_RELOC_START
6496 ENUMDOC
6497 AArch64 pseudo relocation code to mark the start of the AArch64
6498 relocation enumerators. N.B. the order of the enumerators is
6499 important as several tables in the AArch64 bfd backend are indexed
6500 by these enumerators; make sure they are all synced.
6501 ENUM
6502 BFD_RELOC_AARCH64_NONE
6503 ENUMDOC
6504 AArch64 null relocation code.
6505 ENUM
6506 BFD_RELOC_AARCH64_64
6507 ENUMX
6508 BFD_RELOC_AARCH64_32
6509 ENUMX
6510 BFD_RELOC_AARCH64_16
6511 ENUMDOC
6512 Basic absolute relocations of N bits. These are equivalent to
6513 BFD_RELOC_N and they were added to assist the indexing of the howto
6514 table.
6515 ENUM
6516 BFD_RELOC_AARCH64_64_PCREL
6517 ENUMX
6518 BFD_RELOC_AARCH64_32_PCREL
6519 ENUMX
6520 BFD_RELOC_AARCH64_16_PCREL
6521 ENUMDOC
6522 PC-relative relocations. These are equivalent to BFD_RELOC_N_PCREL
6523 and they were added to assist the indexing of the howto table.
6524 ENUM
6525 BFD_RELOC_AARCH64_MOVW_G0
6526 ENUMDOC
6527 AArch64 MOV[NZK] instruction with most significant bits 0 to 15
6528 of an unsigned address/value.
6529 ENUM
6530 BFD_RELOC_AARCH64_MOVW_G0_NC
6531 ENUMDOC
6532 AArch64 MOV[NZK] instruction with less significant bits 0 to 15 of
6533 an address/value. No overflow checking.
6534 ENUM
6535 BFD_RELOC_AARCH64_MOVW_G1
6536 ENUMDOC
6537 AArch64 MOV[NZK] instruction with most significant bits 16 to 31
6538 of an unsigned address/value.
6539 ENUM
6540 BFD_RELOC_AARCH64_MOVW_G1_NC
6541 ENUMDOC
6542 AArch64 MOV[NZK] instruction with less significant bits 16 to 31
6543 of an address/value. No overflow checking.
6544 ENUM
6545 BFD_RELOC_AARCH64_MOVW_G2
6546 ENUMDOC
6547 AArch64 MOV[NZK] instruction with most significant bits 32 to 47
6548 of an unsigned address/value.
6549 ENUM
6550 BFD_RELOC_AARCH64_MOVW_G2_NC
6551 ENUMDOC
6552 AArch64 MOV[NZK] instruction with less significant bits 32 to 47
6553 of an address/value. No overflow checking.
6554 ENUM
6555 BFD_RELOC_AARCH64_MOVW_G3
6556 ENUMDOC
6557 AArch64 MOV[NZK] instruction with most signficant bits 48 to 64
6558 of a signed or unsigned address/value.
6559 ENUM
6560 BFD_RELOC_AARCH64_MOVW_G0_S
6561 ENUMDOC
6562 AArch64 MOV[NZ] instruction with most significant bits 0 to 15
6563 of a signed value. Changes instruction to MOVZ or MOVN depending on the
6564 value's sign.
6565 ENUM
6566 BFD_RELOC_AARCH64_MOVW_G1_S
6567 ENUMDOC
6568 AArch64 MOV[NZ] instruction with most significant bits 16 to 31
6569 of a signed value. Changes instruction to MOVZ or MOVN depending on the
6570 value's sign.
6571 ENUM
6572 BFD_RELOC_AARCH64_MOVW_G2_S
6573 ENUMDOC
6574 AArch64 MOV[NZ] instruction with most significant bits 32 to 47
6575 of a signed value. Changes instruction to MOVZ or MOVN depending on the
6576 value's sign.
6577 ENUM
6578 BFD_RELOC_AARCH64_LD_LO19_PCREL
6579 ENUMDOC
6580 AArch64 Load Literal instruction, holding a 19 bit pc-relative word
6581 offset. The lowest two bits must be zero and are not stored in the
6582 instruction, giving a 21 bit signed byte offset.
6583 ENUM
6584 BFD_RELOC_AARCH64_ADR_LO21_PCREL
6585 ENUMDOC
6586 AArch64 ADR instruction, holding a simple 21 bit pc-relative byte offset.
6587 ENUM
6588 BFD_RELOC_AARCH64_ADR_HI21_PCREL
6589 ENUMDOC
6590 AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
6591 offset, giving a 4KB aligned page base address.
6592 ENUM
6593 BFD_RELOC_AARCH64_ADR_HI21_NC_PCREL
6594 ENUMDOC
6595 AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
6596 offset, giving a 4KB aligned page base address, but with no overflow
6597 checking.
6598 ENUM
6599 BFD_RELOC_AARCH64_ADD_LO12
6600 ENUMDOC
6601 AArch64 ADD immediate instruction, holding bits 0 to 11 of the address.
6602 Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6603 ENUM
6604 BFD_RELOC_AARCH64_LDST8_LO12
6605 ENUMDOC
6606 AArch64 8-bit load/store instruction, holding bits 0 to 11 of the
6607 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6608 ENUM
6609 BFD_RELOC_AARCH64_TSTBR14
6610 ENUMDOC
6611 AArch64 14 bit pc-relative test bit and branch.
6612 The lowest two bits must be zero and are not stored in the instruction,
6613 giving a 16 bit signed byte offset.
6614 ENUM
6615 BFD_RELOC_AARCH64_BRANCH19
6616 ENUMDOC
6617 AArch64 19 bit pc-relative conditional branch and compare & branch.
6618 The lowest two bits must be zero and are not stored in the instruction,
6619 giving a 21 bit signed byte offset.
6620 ENUM
6621 BFD_RELOC_AARCH64_JUMP26
6622 ENUMDOC
6623 AArch64 26 bit pc-relative unconditional branch.
6624 The lowest two bits must be zero and are not stored in the instruction,
6625 giving a 28 bit signed byte offset.
6626 ENUM
6627 BFD_RELOC_AARCH64_CALL26
6628 ENUMDOC
6629 AArch64 26 bit pc-relative unconditional branch and link.
6630 The lowest two bits must be zero and are not stored in the instruction,
6631 giving a 28 bit signed byte offset.
6632 ENUM
6633 BFD_RELOC_AARCH64_LDST16_LO12
6634 ENUMDOC
6635 AArch64 16-bit load/store instruction, holding bits 0 to 11 of the
6636 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6637 ENUM
6638 BFD_RELOC_AARCH64_LDST32_LO12
6639 ENUMDOC
6640 AArch64 32-bit load/store instruction, holding bits 0 to 11 of the
6641 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6642 ENUM
6643 BFD_RELOC_AARCH64_LDST64_LO12
6644 ENUMDOC
6645 AArch64 64-bit load/store instruction, holding bits 0 to 11 of the
6646 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6647 ENUM
6648 BFD_RELOC_AARCH64_LDST128_LO12
6649 ENUMDOC
6650 AArch64 128-bit load/store instruction, holding bits 0 to 11 of the
6651 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6652 ENUM
6653 BFD_RELOC_AARCH64_GOT_LD_PREL19
6654 ENUMDOC
6655 AArch64 Load Literal instruction, holding a 19 bit PC relative word
6656 offset of the global offset table entry for a symbol. The lowest two
6657 bits must be zero and are not stored in the instruction, giving a 21
6658 bit signed byte offset. This relocation type requires signed overflow
6659 checking.
6660 ENUM
6661 BFD_RELOC_AARCH64_ADR_GOT_PAGE
6662 ENUMDOC
6663 Get to the page base of the global offset table entry for a symbol as
6664 part of an ADRP instruction using a 21 bit PC relative value.Used in
6665 conjunction with BFD_RELOC_AARCH64_LD64_GOT_LO12_NC.
6666 ENUM
6667 BFD_RELOC_AARCH64_LD64_GOT_LO12_NC
6668 ENUMDOC
6669 Unsigned 12 bit byte offset for 64 bit load/store from the page of
6670 the GOT entry for this symbol. Used in conjunction with
6671 BFD_RELOC_AARCH64_ADR_GOTPAGE. Valid in LP64 ABI only.
6672 ENUM
6673 BFD_RELOC_AARCH64_LD32_GOT_LO12_NC
6674 ENUMDOC
6675 Unsigned 12 bit byte offset for 32 bit load/store from the page of
6676 the GOT entry for this symbol. Used in conjunction with
6677 BFD_RELOC_AARCH64_ADR_GOTPAGE. Valid in ILP32 ABI only.
6678 ENUM
6679 BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21
6680 ENUMDOC
6681 Get to the page base of the global offset table entry for a symbols
6682 tls_index structure as part of an adrp instruction using a 21 bit PC
6683 relative value. Used in conjunction with
6684 BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC.
6685 ENUM
6686 BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC
6687 ENUMDOC
6688 Unsigned 12 bit byte offset to global offset table entry for a symbols
6689 tls_index structure. Used in conjunction with
6690 BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21.
6691 ENUM
6692 BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G1
6693 ENUMDOC
6694 AArch64 TLS INITIAL EXEC relocation.
6695 ENUM
6696 BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G0_NC
6697 ENUMDOC
6698 AArch64 TLS INITIAL EXEC relocation.
6699 ENUM
6700 BFD_RELOC_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21
6701 ENUMDOC
6702 AArch64 TLS INITIAL EXEC relocation.
6703 ENUM
6704 BFD_RELOC_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC
6705 ENUMDOC
6706 AArch64 TLS INITIAL EXEC relocation.
6707 ENUM
6708 BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC
6709 ENUMDOC
6710 AArch64 TLS INITIAL EXEC relocation.
6711 ENUM
6712 BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19
6713 ENUMDOC
6714 AArch64 TLS INITIAL EXEC relocation.
6715 ENUM
6716 BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G2
6717 ENUMDOC
6718 AArch64 TLS LOCAL EXEC relocation.
6719 ENUM
6720 BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1
6721 ENUMDOC
6722 AArch64 TLS LOCAL EXEC relocation.
6723 ENUM
6724 BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1_NC
6725 ENUMDOC
6726 AArch64 TLS LOCAL EXEC relocation.
6727 ENUM
6728 BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0
6729 ENUMDOC
6730 AArch64 TLS LOCAL EXEC relocation.
6731 ENUM
6732 BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0_NC
6733 ENUMDOC
6734 AArch64 TLS LOCAL EXEC relocation.
6735 ENUM
6736 BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_HI12
6737 ENUMDOC
6738 AArch64 TLS LOCAL EXEC relocation.
6739 ENUM
6740 BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12
6741 ENUMDOC
6742 AArch64 TLS LOCAL EXEC relocation.
6743 ENUM
6744 BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12_NC
6745 ENUMDOC
6746 AArch64 TLS LOCAL EXEC relocation.
6747 ENUM
6748 BFD_RELOC_AARCH64_TLSDESC_LD_PREL19
6749 ENUMDOC
6750 AArch64 TLS DESC relocation.
6751 ENUM
6752 BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21
6753 ENUMDOC
6754 AArch64 TLS DESC relocation.
6755 ENUM
6756 BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21
6757 ENUMDOC
6758 AArch64 TLS DESC relocation.
6759 ENUM
6760 BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC
6761 ENUMDOC
6762 AArch64 TLS DESC relocation.
6763 ENUM
6764 BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC
6765 ENUMDOC
6766 AArch64 TLS DESC relocation.
6767 ENUM
6768 BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC
6769 ENUMDOC
6770 AArch64 TLS DESC relocation.
6771 ENUM
6772 BFD_RELOC_AARCH64_TLSDESC_OFF_G1
6773 ENUMDOC
6774 AArch64 TLS DESC relocation.
6775 ENUM
6776 BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC
6777 ENUMDOC
6778 AArch64 TLS DESC relocation.
6779 ENUM
6780 BFD_RELOC_AARCH64_TLSDESC_LDR
6781 ENUMDOC
6782 AArch64 TLS DESC relocation.
6783 ENUM
6784 BFD_RELOC_AARCH64_TLSDESC_ADD
6785 ENUMDOC
6786 AArch64 TLS DESC relocation.
6787 ENUM
6788 BFD_RELOC_AARCH64_TLSDESC_CALL
6789 ENUMDOC
6790 AArch64 TLS DESC relocation.
6791 ENUM
6792 BFD_RELOC_AARCH64_COPY
6793 ENUMDOC
6794 AArch64 TLS relocation.
6795 ENUM
6796 BFD_RELOC_AARCH64_GLOB_DAT
6797 ENUMDOC
6798 AArch64 TLS relocation.
6799 ENUM
6800 BFD_RELOC_AARCH64_JUMP_SLOT
6801 ENUMDOC
6802 AArch64 TLS relocation.
6803 ENUM
6804 BFD_RELOC_AARCH64_RELATIVE
6805 ENUMDOC
6806 AArch64 TLS relocation.
6807 ENUM
6808 BFD_RELOC_AARCH64_TLS_DTPMOD
6809 ENUMDOC
6810 AArch64 TLS relocation.
6811 ENUM
6812 BFD_RELOC_AARCH64_TLS_DTPREL
6813 ENUMDOC
6814 AArch64 TLS relocation.
6815 ENUM
6816 BFD_RELOC_AARCH64_TLS_TPREL
6817 ENUMDOC
6818 AArch64 TLS relocation.
6819 ENUM
6820 BFD_RELOC_AARCH64_TLSDESC
6821 ENUMDOC
6822 AArch64 TLS relocation.
6823 ENUM
6824 BFD_RELOC_AARCH64_IRELATIVE
6825 ENUMDOC
6826 AArch64 support for STT_GNU_IFUNC.
6827 ENUM
6828 BFD_RELOC_AARCH64_RELOC_END
6829 ENUMDOC
6830 AArch64 pseudo relocation code to mark the end of the AArch64
6831 relocation enumerators that have direct mapping to ELF reloc codes.
6832 There are a few more enumerators after this one; those are mainly
6833 used by the AArch64 assembler for the internal fixup or to select
6834 one of the above enumerators.
6835 ENUM
6836 BFD_RELOC_AARCH64_GAS_INTERNAL_FIXUP
6837 ENUMDOC
6838 AArch64 pseudo relocation code to be used internally by the AArch64
6839 assembler and not (currently) written to any object files.
6840 ENUM
6841 BFD_RELOC_AARCH64_LDST_LO12
6842 ENUMDOC
6843 AArch64 unspecified load/store instruction, holding bits 0 to 11 of the
6844 address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
6845 ENUM
6846 BFD_RELOC_AARCH64_LD_GOT_LO12_NC
6847 ENUMDOC
6848 AArch64 pseudo relocation code to be used internally by the AArch64
6849 assembler and not (currently) written to any object files.
6850 ENUM
6851 BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC
6852 ENUMDOC
6853 AArch64 pseudo relocation code to be used internally by the AArch64
6854 assembler and not (currently) written to any object files.
6855 ENUM
6856 BFD_RELOC_AARCH64_TLSDESC_LD_LO12_NC
6857 ENUMDOC
6858 AArch64 pseudo relocation code to be used internally by the AArch64
6859 assembler and not (currently) written to any object files.
6860
6861 ENUM
6862 BFD_RELOC_TILEPRO_COPY
6863 ENUMX
6864 BFD_RELOC_TILEPRO_GLOB_DAT
6865 ENUMX
6866 BFD_RELOC_TILEPRO_JMP_SLOT
6867 ENUMX
6868 BFD_RELOC_TILEPRO_RELATIVE
6869 ENUMX
6870 BFD_RELOC_TILEPRO_BROFF_X1
6871 ENUMX
6872 BFD_RELOC_TILEPRO_JOFFLONG_X1
6873 ENUMX
6874 BFD_RELOC_TILEPRO_JOFFLONG_X1_PLT
6875 ENUMX
6876 BFD_RELOC_TILEPRO_IMM8_X0
6877 ENUMX
6878 BFD_RELOC_TILEPRO_IMM8_Y0
6879 ENUMX
6880 BFD_RELOC_TILEPRO_IMM8_X1
6881 ENUMX
6882 BFD_RELOC_TILEPRO_IMM8_Y1
6883 ENUMX
6884 BFD_RELOC_TILEPRO_DEST_IMM8_X1
6885 ENUMX
6886 BFD_RELOC_TILEPRO_MT_IMM15_X1
6887 ENUMX
6888 BFD_RELOC_TILEPRO_MF_IMM15_X1
6889 ENUMX
6890 BFD_RELOC_TILEPRO_IMM16_X0
6891 ENUMX
6892 BFD_RELOC_TILEPRO_IMM16_X1
6893 ENUMX
6894 BFD_RELOC_TILEPRO_IMM16_X0_LO
6895 ENUMX
6896 BFD_RELOC_TILEPRO_IMM16_X1_LO
6897 ENUMX
6898 BFD_RELOC_TILEPRO_IMM16_X0_HI
6899 ENUMX
6900 BFD_RELOC_TILEPRO_IMM16_X1_HI
6901 ENUMX
6902 BFD_RELOC_TILEPRO_IMM16_X0_HA
6903 ENUMX
6904 BFD_RELOC_TILEPRO_IMM16_X1_HA
6905 ENUMX
6906 BFD_RELOC_TILEPRO_IMM16_X0_PCREL
6907 ENUMX
6908 BFD_RELOC_TILEPRO_IMM16_X1_PCREL
6909 ENUMX
6910 BFD_RELOC_TILEPRO_IMM16_X0_LO_PCREL
6911 ENUMX
6912 BFD_RELOC_TILEPRO_IMM16_X1_LO_PCREL
6913 ENUMX
6914 BFD_RELOC_TILEPRO_IMM16_X0_HI_PCREL
6915 ENUMX
6916 BFD_RELOC_TILEPRO_IMM16_X1_HI_PCREL
6917 ENUMX
6918 BFD_RELOC_TILEPRO_IMM16_X0_HA_PCREL
6919 ENUMX
6920 BFD_RELOC_TILEPRO_IMM16_X1_HA_PCREL
6921 ENUMX
6922 BFD_RELOC_TILEPRO_IMM16_X0_GOT
6923 ENUMX
6924 BFD_RELOC_TILEPRO_IMM16_X1_GOT
6925 ENUMX
6926 BFD_RELOC_TILEPRO_IMM16_X0_GOT_LO
6927 ENUMX
6928 BFD_RELOC_TILEPRO_IMM16_X1_GOT_LO
6929 ENUMX
6930 BFD_RELOC_TILEPRO_IMM16_X0_GOT_HI
6931 ENUMX
6932 BFD_RELOC_TILEPRO_IMM16_X1_GOT_HI
6933 ENUMX
6934 BFD_RELOC_TILEPRO_IMM16_X0_GOT_HA
6935 ENUMX
6936 BFD_RELOC_TILEPRO_IMM16_X1_GOT_HA
6937 ENUMX
6938 BFD_RELOC_TILEPRO_MMSTART_X0
6939 ENUMX
6940 BFD_RELOC_TILEPRO_MMEND_X0
6941 ENUMX
6942 BFD_RELOC_TILEPRO_MMSTART_X1
6943 ENUMX
6944 BFD_RELOC_TILEPRO_MMEND_X1
6945 ENUMX
6946 BFD_RELOC_TILEPRO_SHAMT_X0
6947 ENUMX
6948 BFD_RELOC_TILEPRO_SHAMT_X1
6949 ENUMX
6950 BFD_RELOC_TILEPRO_SHAMT_Y0
6951 ENUMX
6952 BFD_RELOC_TILEPRO_SHAMT_Y1
6953 ENUMX
6954 BFD_RELOC_TILEPRO_TLS_GD_CALL
6955 ENUMX
6956 BFD_RELOC_TILEPRO_IMM8_X0_TLS_GD_ADD
6957 ENUMX
6958 BFD_RELOC_TILEPRO_IMM8_X1_TLS_GD_ADD
6959 ENUMX
6960 BFD_RELOC_TILEPRO_IMM8_Y0_TLS_GD_ADD
6961 ENUMX
6962 BFD_RELOC_TILEPRO_IMM8_Y1_TLS_GD_ADD
6963 ENUMX
6964 BFD_RELOC_TILEPRO_TLS_IE_LOAD
6965 ENUMX
6966 BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD
6967 ENUMX
6968 BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD
6969 ENUMX
6970 BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_LO
6971 ENUMX
6972 BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_LO
6973 ENUMX
6974 BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HI
6975 ENUMX
6976 BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HI
6977 ENUMX
6978 BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HA
6979 ENUMX
6980 BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HA
6981 ENUMX
6982 BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE
6983 ENUMX
6984 BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE
6985 ENUMX
6986 BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_LO
6987 ENUMX
6988 BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_LO
6989 ENUMX
6990 BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HI
6991 ENUMX
6992 BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HI
6993 ENUMX
6994 BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HA
6995 ENUMX
6996 BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HA
6997 ENUMX
6998 BFD_RELOC_TILEPRO_TLS_DTPMOD32
6999 ENUMX
7000 BFD_RELOC_TILEPRO_TLS_DTPOFF32
7001 ENUMX
7002 BFD_RELOC_TILEPRO_TLS_TPOFF32
7003 ENUMX
7004 BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE
7005 ENUMX
7006 BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE
7007 ENUMX
7008 BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_LO
7009 ENUMX
7010 BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_LO
7011 ENUMX
7012 BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HI
7013 ENUMX
7014 BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HI
7015 ENUMX
7016 BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HA
7017 ENUMX
7018 BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HA
7019 ENUMDOC
7020 Tilera TILEPro Relocations.
7021 ENUM
7022 BFD_RELOC_TILEGX_HW0
7023 ENUMX
7024 BFD_RELOC_TILEGX_HW1
7025 ENUMX
7026 BFD_RELOC_TILEGX_HW2
7027 ENUMX
7028 BFD_RELOC_TILEGX_HW3
7029 ENUMX
7030 BFD_RELOC_TILEGX_HW0_LAST
7031 ENUMX
7032 BFD_RELOC_TILEGX_HW1_LAST
7033 ENUMX
7034 BFD_RELOC_TILEGX_HW2_LAST
7035 ENUMX
7036 BFD_RELOC_TILEGX_COPY
7037 ENUMX
7038 BFD_RELOC_TILEGX_GLOB_DAT
7039 ENUMX
7040 BFD_RELOC_TILEGX_JMP_SLOT
7041 ENUMX
7042 BFD_RELOC_TILEGX_RELATIVE
7043 ENUMX
7044 BFD_RELOC_TILEGX_BROFF_X1
7045 ENUMX
7046 BFD_RELOC_TILEGX_JUMPOFF_X1
7047 ENUMX
7048 BFD_RELOC_TILEGX_JUMPOFF_X1_PLT
7049 ENUMX
7050 BFD_RELOC_TILEGX_IMM8_X0
7051 ENUMX
7052 BFD_RELOC_TILEGX_IMM8_Y0
7053 ENUMX
7054 BFD_RELOC_TILEGX_IMM8_X1
7055 ENUMX
7056 BFD_RELOC_TILEGX_IMM8_Y1
7057 ENUMX
7058 BFD_RELOC_TILEGX_DEST_IMM8_X1
7059 ENUMX
7060 BFD_RELOC_TILEGX_MT_IMM14_X1
7061 ENUMX
7062 BFD_RELOC_TILEGX_MF_IMM14_X1
7063 ENUMX
7064 BFD_RELOC_TILEGX_MMSTART_X0
7065 ENUMX
7066 BFD_RELOC_TILEGX_MMEND_X0
7067 ENUMX
7068 BFD_RELOC_TILEGX_SHAMT_X0
7069 ENUMX
7070 BFD_RELOC_TILEGX_SHAMT_X1
7071 ENUMX
7072 BFD_RELOC_TILEGX_SHAMT_Y0
7073 ENUMX
7074 BFD_RELOC_TILEGX_SHAMT_Y1
7075 ENUMX
7076 BFD_RELOC_TILEGX_IMM16_X0_HW0
7077 ENUMX
7078 BFD_RELOC_TILEGX_IMM16_X1_HW0
7079 ENUMX
7080 BFD_RELOC_TILEGX_IMM16_X0_HW1
7081 ENUMX
7082 BFD_RELOC_TILEGX_IMM16_X1_HW1
7083 ENUMX
7084 BFD_RELOC_TILEGX_IMM16_X0_HW2
7085 ENUMX
7086 BFD_RELOC_TILEGX_IMM16_X1_HW2
7087 ENUMX
7088 BFD_RELOC_TILEGX_IMM16_X0_HW3
7089 ENUMX
7090 BFD_RELOC_TILEGX_IMM16_X1_HW3
7091 ENUMX
7092 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST
7093 ENUMX
7094 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST
7095 ENUMX
7096 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST
7097 ENUMX
7098 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST
7099 ENUMX
7100 BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST
7101 ENUMX
7102 BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST
7103 ENUMX
7104 BFD_RELOC_TILEGX_IMM16_X0_HW0_PCREL
7105 ENUMX
7106 BFD_RELOC_TILEGX_IMM16_X1_HW0_PCREL
7107 ENUMX
7108 BFD_RELOC_TILEGX_IMM16_X0_HW1_PCREL
7109 ENUMX
7110 BFD_RELOC_TILEGX_IMM16_X1_HW1_PCREL
7111 ENUMX
7112 BFD_RELOC_TILEGX_IMM16_X0_HW2_PCREL
7113 ENUMX
7114 BFD_RELOC_TILEGX_IMM16_X1_HW2_PCREL
7115 ENUMX
7116 BFD_RELOC_TILEGX_IMM16_X0_HW3_PCREL
7117 ENUMX
7118 BFD_RELOC_TILEGX_IMM16_X1_HW3_PCREL
7119 ENUMX
7120 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PCREL
7121 ENUMX
7122 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PCREL
7123 ENUMX
7124 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PCREL
7125 ENUMX
7126 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PCREL
7127 ENUMX
7128 BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PCREL
7129 ENUMX
7130 BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PCREL
7131 ENUMX
7132 BFD_RELOC_TILEGX_IMM16_X0_HW0_GOT
7133 ENUMX
7134 BFD_RELOC_TILEGX_IMM16_X1_HW0_GOT
7135 ENUMX
7136 BFD_RELOC_TILEGX_IMM16_X0_HW0_PLT_PCREL
7137 ENUMX
7138 BFD_RELOC_TILEGX_IMM16_X1_HW0_PLT_PCREL
7139 ENUMX
7140 BFD_RELOC_TILEGX_IMM16_X0_HW1_PLT_PCREL
7141 ENUMX
7142 BFD_RELOC_TILEGX_IMM16_X1_HW1_PLT_PCREL
7143 ENUMX
7144 BFD_RELOC_TILEGX_IMM16_X0_HW2_PLT_PCREL
7145 ENUMX
7146 BFD_RELOC_TILEGX_IMM16_X1_HW2_PLT_PCREL
7147 ENUMX
7148 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_GOT
7149 ENUMX
7150 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_GOT
7151 ENUMX
7152 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_GOT
7153 ENUMX
7154 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_GOT
7155 ENUMX
7156 BFD_RELOC_TILEGX_IMM16_X0_HW3_PLT_PCREL
7157 ENUMX
7158 BFD_RELOC_TILEGX_IMM16_X1_HW3_PLT_PCREL
7159 ENUMX
7160 BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_GD
7161 ENUMX
7162 BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_GD
7163 ENUMX
7164 BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_LE
7165 ENUMX
7166 BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_LE
7167 ENUMX
7168 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_LE
7169 ENUMX
7170 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_LE
7171 ENUMX
7172 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_LE
7173 ENUMX
7174 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_LE
7175 ENUMX
7176 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_GD
7177 ENUMX
7178 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_GD
7179 ENUMX
7180 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_GD
7181 ENUMX
7182 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_GD
7183 ENUMX
7184 BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_IE
7185 ENUMX
7186 BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_IE
7187 ENUMX
7188 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PLT_PCREL
7189 ENUMX
7190 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PLT_PCREL
7191 ENUMX
7192 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PLT_PCREL
7193 ENUMX
7194 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PLT_PCREL
7195 ENUMX
7196 BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PLT_PCREL
7197 ENUMX
7198 BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PLT_PCREL
7199 ENUMX
7200 BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_IE
7201 ENUMX
7202 BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_IE
7203 ENUMX
7204 BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_IE
7205 ENUMX
7206 BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_IE
7207 ENUMX
7208 BFD_RELOC_TILEGX_TLS_DTPMOD64
7209 ENUMX
7210 BFD_RELOC_TILEGX_TLS_DTPOFF64
7211 ENUMX
7212 BFD_RELOC_TILEGX_TLS_TPOFF64
7213 ENUMX
7214 BFD_RELOC_TILEGX_TLS_DTPMOD32
7215 ENUMX
7216 BFD_RELOC_TILEGX_TLS_DTPOFF32
7217 ENUMX
7218 BFD_RELOC_TILEGX_TLS_TPOFF32
7219 ENUMX
7220 BFD_RELOC_TILEGX_TLS_GD_CALL
7221 ENUMX
7222 BFD_RELOC_TILEGX_IMM8_X0_TLS_GD_ADD
7223 ENUMX
7224 BFD_RELOC_TILEGX_IMM8_X1_TLS_GD_ADD
7225 ENUMX
7226 BFD_RELOC_TILEGX_IMM8_Y0_TLS_GD_ADD
7227 ENUMX
7228 BFD_RELOC_TILEGX_IMM8_Y1_TLS_GD_ADD
7229 ENUMX
7230 BFD_RELOC_TILEGX_TLS_IE_LOAD
7231 ENUMX
7232 BFD_RELOC_TILEGX_IMM8_X0_TLS_ADD
7233 ENUMX
7234 BFD_RELOC_TILEGX_IMM8_X1_TLS_ADD
7235 ENUMX
7236 BFD_RELOC_TILEGX_IMM8_Y0_TLS_ADD
7237 ENUMX
7238 BFD_RELOC_TILEGX_IMM8_Y1_TLS_ADD
7239 ENUMDOC
7240 Tilera TILE-Gx Relocations.
7241 ENUM
7242 BFD_RELOC_EPIPHANY_SIMM8
7243 ENUMDOC
7244 Adapteva EPIPHANY - 8 bit signed pc-relative displacement
7245 ENUM
7246 BFD_RELOC_EPIPHANY_SIMM24
7247 ENUMDOC
7248 Adapteva EPIPHANY - 24 bit signed pc-relative displacement
7249 ENUM
7250 BFD_RELOC_EPIPHANY_HIGH
7251 ENUMDOC
7252 Adapteva EPIPHANY - 16 most-significant bits of absolute address
7253 ENUM
7254 BFD_RELOC_EPIPHANY_LOW
7255 ENUMDOC
7256 Adapteva EPIPHANY - 16 least-significant bits of absolute address
7257 ENUM
7258 BFD_RELOC_EPIPHANY_SIMM11
7259 ENUMDOC
7260 Adapteva EPIPHANY - 11 bit signed number - add/sub immediate
7261 ENUM
7262 BFD_RELOC_EPIPHANY_IMM11
7263 ENUMDOC
7264 Adapteva EPIPHANY - 11 bit sign-magnitude number (ld/st displacement)
7265 ENUM
7266 BFD_RELOC_EPIPHANY_IMM8
7267 ENUMDOC
7268 Adapteva EPIPHANY - 8 bit immediate for 16 bit mov instruction.
7269
7270
7271 ENDSENUM
7272 BFD_RELOC_UNUSED
7273 CODE_FRAGMENT
7274 .
7275 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
7276 */
7277
7278 /*
7279 FUNCTION
7280 bfd_reloc_type_lookup
7281 bfd_reloc_name_lookup
7282
7283 SYNOPSIS
7284 reloc_howto_type *bfd_reloc_type_lookup
7285 (bfd *abfd, bfd_reloc_code_real_type code);
7286 reloc_howto_type *bfd_reloc_name_lookup
7287 (bfd *abfd, const char *reloc_name);
7288
7289 DESCRIPTION
7290 Return a pointer to a howto structure which, when
7291 invoked, will perform the relocation @var{code} on data from the
7292 architecture noted.
7293
7294 */
7295
7296 reloc_howto_type *
7297 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
7298 {
7299 return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
7300 }
7301
7302 reloc_howto_type *
7303 bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
7304 {
7305 return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
7306 }
7307
7308 static reloc_howto_type bfd_howto_32 =
7309 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
7310
7311 /*
7312 INTERNAL_FUNCTION
7313 bfd_default_reloc_type_lookup
7314
7315 SYNOPSIS
7316 reloc_howto_type *bfd_default_reloc_type_lookup
7317 (bfd *abfd, bfd_reloc_code_real_type code);
7318
7319 DESCRIPTION
7320 Provides a default relocation lookup routine for any architecture.
7321
7322 */
7323
7324 reloc_howto_type *
7325 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
7326 {
7327 switch (code)
7328 {
7329 case BFD_RELOC_CTOR:
7330 /* The type of reloc used in a ctor, which will be as wide as the
7331 address - so either a 64, 32, or 16 bitter. */
7332 switch (bfd_arch_bits_per_address (abfd))
7333 {
7334 case 64:
7335 BFD_FAIL ();
7336 case 32:
7337 return &bfd_howto_32;
7338 case 16:
7339 BFD_FAIL ();
7340 default:
7341 BFD_FAIL ();
7342 }
7343 default:
7344 BFD_FAIL ();
7345 }
7346 return NULL;
7347 }
7348
7349 /*
7350 FUNCTION
7351 bfd_get_reloc_code_name
7352
7353 SYNOPSIS
7354 const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
7355
7356 DESCRIPTION
7357 Provides a printable name for the supplied relocation code.
7358 Useful mainly for printing error messages.
7359 */
7360
7361 const char *
7362 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
7363 {
7364 if (code > BFD_RELOC_UNUSED)
7365 return 0;
7366 return bfd_reloc_code_real_names[code];
7367 }
7368
7369 /*
7370 INTERNAL_FUNCTION
7371 bfd_generic_relax_section
7372
7373 SYNOPSIS
7374 bfd_boolean bfd_generic_relax_section
7375 (bfd *abfd,
7376 asection *section,
7377 struct bfd_link_info *,
7378 bfd_boolean *);
7379
7380 DESCRIPTION
7381 Provides default handling for relaxing for back ends which
7382 don't do relaxing.
7383 */
7384
7385 bfd_boolean
7386 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
7387 asection *section ATTRIBUTE_UNUSED,
7388 struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
7389 bfd_boolean *again)
7390 {
7391 if (link_info->relocatable)
7392 (*link_info->callbacks->einfo)
7393 (_("%P%F: --relax and -r may not be used together\n"));
7394
7395 *again = FALSE;
7396 return TRUE;
7397 }
7398
7399 /*
7400 INTERNAL_FUNCTION
7401 bfd_generic_gc_sections
7402
7403 SYNOPSIS
7404 bfd_boolean bfd_generic_gc_sections
7405 (bfd *, struct bfd_link_info *);
7406
7407 DESCRIPTION
7408 Provides default handling for relaxing for back ends which
7409 don't do section gc -- i.e., does nothing.
7410 */
7411
7412 bfd_boolean
7413 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
7414 struct bfd_link_info *info ATTRIBUTE_UNUSED)
7415 {
7416 return TRUE;
7417 }
7418
7419 /*
7420 INTERNAL_FUNCTION
7421 bfd_generic_lookup_section_flags
7422
7423 SYNOPSIS
7424 bfd_boolean bfd_generic_lookup_section_flags
7425 (struct bfd_link_info *, struct flag_info *, asection *);
7426
7427 DESCRIPTION
7428 Provides default handling for section flags lookup
7429 -- i.e., does nothing.
7430 Returns FALSE if the section should be omitted, otherwise TRUE.
7431 */
7432
7433 bfd_boolean
7434 bfd_generic_lookup_section_flags (struct bfd_link_info *info ATTRIBUTE_UNUSED,
7435 struct flag_info *flaginfo,
7436 asection *section ATTRIBUTE_UNUSED)
7437 {
7438 if (flaginfo != NULL)
7439 {
7440 (*_bfd_error_handler) (_("INPUT_SECTION_FLAGS are not supported.\n"));
7441 return FALSE;
7442 }
7443 return TRUE;
7444 }
7445
7446 /*
7447 INTERNAL_FUNCTION
7448 bfd_generic_merge_sections
7449
7450 SYNOPSIS
7451 bfd_boolean bfd_generic_merge_sections
7452 (bfd *, struct bfd_link_info *);
7453
7454 DESCRIPTION
7455 Provides default handling for SEC_MERGE section merging for back ends
7456 which don't have SEC_MERGE support -- i.e., does nothing.
7457 */
7458
7459 bfd_boolean
7460 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
7461 struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
7462 {
7463 return TRUE;
7464 }
7465
7466 /*
7467 INTERNAL_FUNCTION
7468 bfd_generic_get_relocated_section_contents
7469
7470 SYNOPSIS
7471 bfd_byte *bfd_generic_get_relocated_section_contents
7472 (bfd *abfd,
7473 struct bfd_link_info *link_info,
7474 struct bfd_link_order *link_order,
7475 bfd_byte *data,
7476 bfd_boolean relocatable,
7477 asymbol **symbols);
7478
7479 DESCRIPTION
7480 Provides default handling of relocation effort for back ends
7481 which can't be bothered to do it efficiently.
7482
7483 */
7484
7485 bfd_byte *
7486 bfd_generic_get_relocated_section_contents (bfd *abfd,
7487 struct bfd_link_info *link_info,
7488 struct bfd_link_order *link_order,
7489 bfd_byte *data,
7490 bfd_boolean relocatable,
7491 asymbol **symbols)
7492 {
7493 bfd *input_bfd = link_order->u.indirect.section->owner;
7494 asection *input_section = link_order->u.indirect.section;
7495 long reloc_size;
7496 arelent **reloc_vector;
7497 long reloc_count;
7498
7499 reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
7500 if (reloc_size < 0)
7501 return NULL;
7502
7503 /* Read in the section. */
7504 if (!bfd_get_full_section_contents (input_bfd, input_section, &data))
7505 return NULL;
7506
7507 if (reloc_size == 0)
7508 return data;
7509
7510 reloc_vector = (arelent **) bfd_malloc (reloc_size);
7511 if (reloc_vector == NULL)
7512 return NULL;
7513
7514 reloc_count = bfd_canonicalize_reloc (input_bfd,
7515 input_section,
7516 reloc_vector,
7517 symbols);
7518 if (reloc_count < 0)
7519 goto error_return;
7520
7521 if (reloc_count > 0)
7522 {
7523 arelent **parent;
7524 for (parent = reloc_vector; *parent != NULL; parent++)
7525 {
7526 char *error_message = NULL;
7527 asymbol *symbol;
7528 bfd_reloc_status_type r;
7529
7530 symbol = *(*parent)->sym_ptr_ptr;
7531 if (symbol->section && discarded_section (symbol->section))
7532 {
7533 bfd_byte *p;
7534 static reloc_howto_type none_howto
7535 = HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
7536 "unused", FALSE, 0, 0, FALSE);
7537
7538 p = data + (*parent)->address * bfd_octets_per_byte (input_bfd);
7539 _bfd_clear_contents ((*parent)->howto, input_bfd, input_section,
7540 p);
7541 (*parent)->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
7542 (*parent)->addend = 0;
7543 (*parent)->howto = &none_howto;
7544 r = bfd_reloc_ok;
7545 }
7546 else
7547 r = bfd_perform_relocation (input_bfd,
7548 *parent,
7549 data,
7550 input_section,
7551 relocatable ? abfd : NULL,
7552 &error_message);
7553
7554 if (relocatable)
7555 {
7556 asection *os = input_section->output_section;
7557
7558 /* A partial link, so keep the relocs. */
7559 os->orelocation[os->reloc_count] = *parent;
7560 os->reloc_count++;
7561 }
7562
7563 if (r != bfd_reloc_ok)
7564 {
7565 switch (r)
7566 {
7567 case bfd_reloc_undefined:
7568 if (!((*link_info->callbacks->undefined_symbol)
7569 (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
7570 input_bfd, input_section, (*parent)->address,
7571 TRUE)))
7572 goto error_return;
7573 break;
7574 case bfd_reloc_dangerous:
7575 BFD_ASSERT (error_message != NULL);
7576 if (!((*link_info->callbacks->reloc_dangerous)
7577 (link_info, error_message, input_bfd, input_section,
7578 (*parent)->address)))
7579 goto error_return;
7580 break;
7581 case bfd_reloc_overflow:
7582 if (!((*link_info->callbacks->reloc_overflow)
7583 (link_info, NULL,
7584 bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
7585 (*parent)->howto->name, (*parent)->addend,
7586 input_bfd, input_section, (*parent)->address)))
7587 goto error_return;
7588 break;
7589 case bfd_reloc_outofrange:
7590 /* PR ld/13730:
7591 This error can result when processing some partially
7592 complete binaries. Do not abort, but issue an error
7593 message instead. */
7594 link_info->callbacks->einfo
7595 (_("%X%P: %B(%A): relocation \"%R\" goes out of range\n"),
7596 abfd, input_section, * parent);
7597 goto error_return;
7598
7599 default:
7600 abort ();
7601 break;
7602 }
7603
7604 }
7605 }
7606 }
7607
7608 free (reloc_vector);
7609 return data;
7610
7611 error_return:
7612 free (reloc_vector);
7613 return NULL;
7614 }
GDB Binutils - Deliverables
This page took 0.191324 seconds and 5 git commands to generate.