binutils/ChangeLog

   1 2019-09-20  Alan Modra  <amodra@gmail.com>
   2
   3         * ar.c (write_archive): Use bfd_set_thin_archive.
   4
   5 2019-09-18  Tamar Christina  <tamar.christina@arm.com>
   6
   7         * testsuite/binutils-all/objdump.exp (objump -S): Update testcases.
   8
   9 2019-09-18  Alan Modra  <amodra@gmail.com>
  10
  11         * addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c,
  12         * objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c,
  13         * od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c,
  14         * resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update
  15         throughout for bfd section macro and function changes.
  16
  17 2019-09-18  Alan Modra  <amodra@gmail.com>
  18
  19         * nm.c: Update bfd_get_section to bfd_asymbol_section throughout.
  20         * objcopy.c: Likewise.
  21         * objdump.c: Likewise.
  22         * rdcoff.c: Likewise.
  23         * objcopy.c (create_new_symbol): Use bfd_set_asymbol_name.
  24         (filter_symbols): Likewise.
  25
  26 2019-09-18  Simon Marchi  <simon.marchi@polymtl.ca>
  27
  28         * doc/Makefile.am (MOSTLYCLEANFILES): Clean all man pages,
  29         cxxfilt.man and binutils.info.
  30         (MAINTAINERCLEANFILES): Remove.
  31         * doc/Makefile.in: Re-generate.
  32
  33 2019-09-18  Simon Marchi  <simon.marchi@polymtl.ca>
  34
  35         * doc/Makefile.am: Remove references to binutils_TEXINFOS.
  36         * doc/Makefile.in: Re-generate.
  37
  38 2019-09-18  Simon Marchi  <simon.marchi@polymtl.ca>
  39
  40         * doc/Makefile.am (install-data-loca): Remove target.
  41         (DISTCLEANFILES): Remove variable.
  42         * doc/Makefile.in: Re-generate.
  43
  44 2019-09-18  Simon Marchi  <simon.marchi@polymtl.ca>
  45
  46         * Makefile.in: Re-generate.
  47         * configure: Re-generate.
  48         * doc/Makefile.in: Re-generate.
  49
  50 2019-09-16  Phil Blundell  <pb@pbcl.net>
  51
  52         * Makefile.in, configure. doc/Makefile.in: Regenerated.
  53
  54 2019-09-11  Tom Tromey  <tom@tromey.com>
  55
  56         * objcopy.c (copy_archive): Update.
  57         * bucomm.h (make_tempname, make_tempdir): Make argument const.
  58         * bucomm.c (make_tempname, make_tempdir): Make argument const.
  59
  60 2019-09-11  Alan Modra  <amodra@gmail.com>
  61
  62         PR 24907
  63         * objdump.c (disassemble_bytes): Adjust code to avoid overlong
  64         lines.  Correct max_reloc_offset_into_insn test.
  65
  66 2019-09-10  Nick Clifton  <nickc@redhat.com>
  67
  68         PR 24907
  69         * objdump.c (null_print): New function.
  70         (disassemble_bytes): Delete previous_octets local and replace with
  71         a test of the max_reloc_offset_into_insn field of the
  72         bfd_arch_info structure.  If a reloc is a potential match for the
  73         next insn, then perform a dummy disassembly in order to calculate
  74         its real length.
  75
  76 2019-09-09  Phil Blundell  <pb@pbcl.net>
  77
  78         binutils 2.33 branch created.
  79
  80 2019-09-06  Alan Modra  <amodra@gmail.com>
  81
  82         * nm.c (print_object_filename_bsd, print_object_filename_sysv),
  83         (print_object_filename_posix, print_archive_filename_bsd),
  84         (print_archive_filename_sysv, print_archive_filename_posix),
  85         (print_archive_member_bsd, print_archive_member_sysv),
  86         (print_archive_member_posix): Constify parameter.
  87         (struct output_fns <print_object_filename, print_archive_filename>),
  88         (<print_archive_member>): Likewise.
  89         * objcopy.c (copy_archive): Add cast for make_tempdir.
  90
  91 2019-08-29  Alan Modra  <amodra@gmail.com>
  92
  93         * dwarf.c (check_uvalue): Remove unnecessary pointer checks.
  94
  95 2019-08-28  Niklas Gürtler  <profclonk@gmail.com>
  96
  97         PR 24942
  98         * objcopy.c (SECTION_CONTEXT_SET_ALIGNMENT): New constant.
  99         (struct section_list): Add alignment field.
 100         (command_line_switch): Add OPTION_SET_SECTION_ALIGNMENT.
 101         (copy_options): Add --set-section-alignment.
 102         (copy_usage): Describe --set-section-alignment.
 103         (find_section_list): Initialise the alignment field.
 104         (setup_section): Handle the alignment field.
 105         (copy_main): Handle OPTION_SET_SECTION_ALIGNMENT.
 106         * doc/binutils.texi: Document the new feature.
 107         * NEWS: Mention the new feature.
 108
 109 2019-08-28  Nick Clifton  <nickc@redhat.com>
 110
 111         PR 24931
 112         * objdump.c (source_comment): New static variable.
 113         (option_values): Add OPTION_SOURCE_COMMENT.
 114         (long_opions): Add --source-comment.
 115         (print_line): If source comment is set, use it as a prefix to the
 116         source code line.
 117         (main): Handle OPTION_SOURCE_COMMENT.
 118         * doc/binutils.texi: Document the new option.
 119         * NEWS: Mention the new feature.
 120         * testsuite/binutils-all/objdump.exp (test_objdump_S): Add tests
 121         of the -S and --source-comment options.
 122
 123 2019-08-27  Nick Clifton  <nickc@redhat.com>
 124
 125         PR 24510
 126         * dwarf.c (MAX_CU_NESTING): New constant.
 127         (level_type_signed): New static array.
 128         (skip_attr_bytes): New function.
 129         (get_type_signedness): New function.
 130         (read_and_print_leb128): New function.
 131         (display_discr_list): New function.
 132         (read_and_display_attr_value): Add start parameter.
 133         Use new functions when handling DW_AT_type and DW_AT_discr_list.
 134         (read_and_display_attr): Add start parameter.  Pass to
 135         read_and_display_attr_value.
 136         (process_debug_info): Update call to read_and_display_attr.
 137         (display_formatted_table): Likewise.
 138         (display_debug_lines_decoded): Likewise.  Also add start
 139         parameter.
 140         (display_debug_lines): Likewise.
 141         * testsuite/binutils-all/dwarf-attributes.S: Update discrimination
 142         lists.
 143         * testsuite/binutils-all/dwarf-attributes.W: Update expected
 144         output.
 145
 146 2019-08-26  Alan Modra  <amodra@gmail.com>
 147
 148         PR 24938
 149         * debug.c (debug_write_type): Call empty_type for NULL type here..
 150         (debug_write_type): ..rather than in just one case here.
 151
 152 2019-08-23  Nick Clifton  <nickc@redhat.com>
 153
 154         PR 24829
 155         * dwarf.c (check_uvalue): New function.  Ensures that a block's
 156         size is valid.
 157         (read_and_display_attr_value): Use check_value when processsing
 158         DW_FORM_block<n> attributes.
 159
 160 2019-08-22  Nick Clifton  <nickc@redhat.com>
 161
 162         PR 24921
 163         * dwarf.c (process_cu_tu_index): Handle the case where a table
 164         does not have any columns.
 165
 166 2019-08-19  Alan Modra  <amodra@gmail.com>
 167
 168         PR 24898
 169         * dwarf.c (display_debug_frames): Use the read_cie check and error
 170         for augmentation data length.
 171
 172 2019-08-17  Alan Modra  <amodra@gmail.com>
 173
 174         PR 24911
 175         * dwarf.c (comp_addr_base): Dereference args.
 176
 177 2019-08-16  Alan Modra  <amodra@gmail.com>
 178
 179         PR 24909
 180         PR 23499
 181         * readelf.c (get_symbol_version_string): Set sym_info earlier.
 182
 183 2019-08-15  Nick Clifton  <nickc@redhat.com>
 184
 185         PR 24767
 186         * doc/binutils.texi (nm): Document the 'n' symbol type.
 187
 188 2019-08-15  Christophe Vidal  <support@krizalys.com>
 189
 190         * docs/binutils.texi: Fixed notice message disassembler options
 191         section of the man page.
 192
 193 2019-08-09  Mihailo Stojanovic  <mihailo.stojanovic@rt-rk.com>
 194
 195         * readelf.c (get_mips_dynamic_type): Return MIPS_XHASH dynamic type.
 196         (get_mips_section_type_name): Return MI{S_XHASH name string.
 197         (dynamic_section_mips_val): Initialize the .MIPS.xhash dynamic
 198         info.
 199         (process_symbol_table): Initialize the .MIPS.xhash section
 200         pointer. Adjust the readelf output to support the new section.
 201         (process_object): Set the .MIPS.xhash dynamic info to zero.
 202
 203 2019-08-09  Tamar Christina  <tamar.christina@arm.com>
 204
 205         * testsuite/binutils-all/arm/in-order-all.d: Skip on pe, wince, coff.
 206         * testsuite/binutils-all/arm/in-order.d: Likewise.
 207         * testsuite/binutils-all/arm/out-of-order-all.d: Likewise.
 208         * testsuite/binutils-all/arm/out-of-order.d: Likewise.
 209
 210 2019-08-08  Nick Clifton  <nickc@redhat.com>
 211
 212         PR 24887
 213         * readelf.c (process_notes_at): Left justify the "Data size"
 214         column heading.
 215         * testsuite/binutils-all/i386/empty.d: Adjust for new output format.
 216         * testsuite/binutils-all/i386/ibt.d: Likewise.
 217         * testsuite/binutils-all/i386/pr21231a.d: Likewise.
 218         * testsuite/binutils-all/i386/pr21231b.d: Likewise.
 219         * testsuite/binutils-all/i386/shstk.d: Likewise.
 220         * testsuite/binutils-all/note-2-32.d: Likewise.
 221         * testsuite/binutils-all/note-2-64.d: Likewise.
 222         * testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
 223         * testsuite/binutils-all/x86-64/empty.d: Likewise.
 224         * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
 225         * testsuite/binutils-all/x86-64/ibt.d: Likewise.
 226         * testsuite/binutils-all/x86-64/pr21231a.d: Likewise.
 227         * testsuite/binutils-all/x86-64/pr21231b.d: Likewise.
 228         * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise.
 229         * testsuite/binutils-all/x86-64/pr23494a.d: Likewise.
 230         * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise.
 231         * testsuite/binutils-all/x86-64/pr23494c.d: Likewise.
 232         * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise.
 233         * testsuite/binutils-all/x86-64/pr23494d.d: Likewise.
 234         * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise.
 235         * testsuite/binutils-all/x86-64/pr23494e.d: Likewise.
 236         * testsuite/binutils-all/x86-64/shstk-x32.d: Likewise.
 237         * testsuite/binutils-all/x86-64/shstk.d: Likewise.
 238
 239 2019-08-08  Nick Clifton  <nickc@redhat.com>
 240
 241         * testsuite/gentestdlls.c (main): Move declaration of loop
 242         variable outside of the for() statement.
 243
 244 2019-08-08  Jordan Rupprecht  <rupprecht@google.com>
 245
 246         * readelf.c (process_note): Mask unknown description data bytes.
 247
 248 2019-08-08  Alan Modra  <amodra@gmail.com>
 249
 250         * readelf.c (get_data): Improve overflow checks.
 251
 252 2019-08-07  Nick Clifton  <nickc@redhat.com>
 253
 254         PR 24777
 255         * doc/binutils.texi: Ensure consistent formating of title strings
 256         for man pages.  Extend the title of the size man page to be more
 257         informative.
 258
 259 2019-08-07  Omair Majid  <omajid@redhat.com>
 260
 261         * testsuite/binutils-all/objdump.exp
 262         (test_objdump_dotnet_assemblies): Fix test to distinguish errors
 263         in parsing simple pei-i386 and pei-x86-64 vs parsing the newly
 264         introduced machine types.
 265         * testsuite/gentestdlls.c (write_simple_dll): New function.
 266         (main): Generate simple and Linux-specific variants of pei-i386
 267         and pei-x86-64 files so both can be used by tests.
 268
 269 2019-08-07  Alan Modra  <amodra@gmail.com>
 270
 271         PR 24876
 272         * readelf.c (dump_ia64_unwind): Check that buffer is large
 273         enough for "stamp" before reading.
 274
 275 2019-08-05  Nick Clifton  <nickc@redhat.com>
 276
 277         PR 24874
 278         * objcopy.c (merge_gnu_build_notes): Do not insist on the first
 279         note being a version note.
 280         Remove spurious debugging fprintf.
 281
 282 2019-08-05  Nick Clifton  <nickc@redhat.com>
 283
 284         PR 24829
 285         * readelf.c (apply_relocations): Catch potential integer overflow
 286         whilst checking reloc location against section size.
 287
 288 2019-08-02  Alan Modra  <amodra@gmail.com>
 289
 290         PR 24871
 291         * readelf.c (ABSADDR): Delete.
 292         (dump_ia64_unwind): Expand ABSADDR.  Check validity of info.section.
 293
 294 2019-07-29  Martin Liska  <mliska@suse.cz>
 295
 296         PR 24768
 297         * nm.c (filter_symbols): Set report_plugin_err if
 298         error is reported.
 299         (display_rel_file): Report error for a missing LTO plugin.
 300
 301 2019-07-26  Alan Modra  <amodra@gmail.com>
 302
 303         PR 24798
 304         * dwarf.c (process_cu_tu_index): Avoid integer overflow on 64-bit
 305         systems by casting ncols and nslots expressions to size_t.  Display
 306         number of columns and slots before giving up due to buffer overflow.
 307         Use %u to display unsigned ints.  Perform more pointer wrap tests.
 308
 309 2019-07-25  Tom Tromey <tromey@adacore.com>
 310
 311         PR 24809
 312         * dwarf.c (display_debug_names): Display the contents of the
 313         augmentation string, if it is printable.
 314
 315 2019-07-25  Nick Clifton  <nickc@redhat.com>
 316
 317         PR 24837
 318         * readelf.c (process_mips_specific): Check for buffer overflow
 319         before reading reginfo information.
 320
 321 2019-07-24  Nick Clifton  <nickc@redhat.com>
 322
 323         PR 13256
 324         * ar.c (decode_options): Restart option scanning if no operation
 325         is detected and argument remain to be scanned.
 326
 327 2019-07-23  Nick Clifton  <nickc@redhat.com>
 328
 329         PR 24818
 330         * objdump.c (is_relocateable): Delete.
 331         (load_specific_debug_section): Test the abfd for relocations
 332         directly, rather than relying upon is_relocateable.
 333         (dump_dwarf): Delete initlialization of is_relocateable.
 334
 335 2019-07-23  Alan Modra  <amodra@gmail.com>
 336
 337         * readelf.c (get_parisc_segment_type): Split off hpux entries..
 338         (get_ia64_segment_type): ..and these..
 339         (get_hpux_segment_type): ..to here.
 340         (get_segment_type): Condition GNU_MBIND on osabi.  Use
 341         get_hpux_segment_type.
 342         (get_symbol_binding): Do not print UNIQUE for ELFOSABI_NONE.
 343         (get_symbol_type): Do not print IFUNC for ELFOSABI_NONE.
 344
 345 2019-07-23  Alan Modra  <amodra@gmail.com>
 346
 347         * testsuite/binutils-all/objcopy.exp (elf64): Correct object
 348         file used to set this variable.
 349
 350 2019-07-23  Omar Majid  <omajid@redhat.com>
 351
 352         * Makefile.am (AUTOMAKE_OPTIONS): Add subdir-objects
 353         (GENTESTDLLSPROG): Define.
 354         (TEST_PROGS): Add GENTESTDLLSPROG.
 355         * Makefile.in: Regenerate.
 356         * testsuite/binutils-all/objdump.exp
 357         (test_objdump_dotnet_assemblies): New proc.
 358         Run the new proc.
 359         * testsuite/gentestdlls.c: New source file.
 360
 361 2019-06-28  Nick Clifton  <nickc@redhat.com>
 362
 363         PR 24707
 364         * objdump.c (slurp_symtab): Fail with a helpful error message if
 365         the symbol table is too large.  Skip this check for MMO format
 366         files.
 367
 368 2019-06-26  Nick Clifton  <nickc@redhat.com>
 369
 370         PR 24703
 371         * bucomm.c (bfd_nonfatal): If no bfd error code has been set then
 372         indicate this in the output.
 373         (bfd_nonfatal_message): Likewise.
 374
 375 2019-06-25  Jan Beulich  <jbeulich@suse.com>
 376
 377         * readelf.c (dump_ctf_indent_lines): Rename local variable
 378         "spaces" to "blanks".
 379
 380 2019-06-25  Jan Beulich  <jbeulich@suse.com>
 381
 382         * objdump.c (dump_ctf_indent_lines): Rename local variable
 383         "spaces" to "blanks".
 384
 385 2019-06-14  Alan Modra  <amodra@gmail.com>
 386
 387         * Makefile.in: Regenerate.
 388         * aclocal.m4: Regenerate.
 389         * doc/Makefile.in: Regenerate.
 390
 391 2019-06-12  Christos Zoulas  <christos@zoulas.com>
 392
 393         PR 24663
 394         * readelf.c (process_netbsd_elf_note): Add support for
 395         NT_NETBSD_PAX.
 396         (process_note): Add support for PaX notes.
 397
 398 2019-06-12  Christos Zoulas  <christos@zoulas.com>
 399
 400         PR 24665
 401         * readelf.c (get_netbsd_elfcore_note_type): Add support for SH
 402         core notes.
 403
 404 2019-06-12  Christos Zoulas  <christos@zoulas.com>
 405
 406         PR 24664
 407         * readelf.c (get_netbsd_elfcore_note_type): Add support for NetBSD
 408         auxv notes.
 409
 410 2019-06-11  Christos Zoulas  <christos@zoulas.com>
 411
 412         PR 24662
 413         * readelf.c (get_alpha_symbol_other): New function.
 414         (get_symbol_other): Use for Alpha symbols.
 415         (is_32bit_pcrel_reloc): Add R_VAX_PCREL32.
 416
 417 2019-06-11  Christos Zoulas  <christos@zoulas.com>
 418
 419         PR 24661
 420         * readelf.c (decode_arm_unwind): Ensure that the local variable
 421         'addr' is always initialised.
 422
 423 2019-06-10  Christos Zoulas  <christos@zoulas.com>
 424
 425         PR 24651
 426         * strings.c (print_strings): Use %u to print unsigned values in
 427         decimal.
 428
 429 2019-06-10  Christos Zoulas  <christos@zoulas.com>
 430
 431         PR 24649
 432         * arsup.c (ar_open): Use asprintf in place of xmalloc and
 433         sprintf.
 434
 435 2019-06-03  Nick Clifton  <nickc@redhat.com>
 436
 437         Revert:
 438         2019-05-29  Nick Clifton  <nickc@redhat.com>
 439
 440         * configure.ac (LIBCTF): Export.  Set to empty for non-ELF based
 441         targets.
 442         (HAVE_LIBCTF): Define if libctf support is available.
 443         * Makefile.am (LIBCTF): Set value to @LIBCTF@.
 444         * objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
 445         defined.
 446         * readelf.c: Likewise.
 447         * configure: Regenerate.
 448         * Makefile.in: Regenerate.
 449         * config.in: Regenerate.
 450
 451 2019-05-30  Nick Alcock  <nick.alcock@oracle.com>
 452
 453         * objdump.c (make_ctfsect): Drop cts_type, cts_flags, and
 454         cts_offset.
 455         * readelf.c (shdr_to_ctf_sect): Likewise.
 456
 457 2019-05-30  Nick Clifton  <nickc@redhat.com>
 458
 459         PR 24627
 460         * readelf.c (process_version_sections): Add 0x prefix to address
 461         display.  Correct indentation.
 462
 463 2019-05-30  Alan Modra  <amodra@gmail.com>
 464
 465         * testsuite/lib/binutils-common.exp (supports_gnu_unique): Add
 466         s12z to targets not supporting this feature.
 467
 468 2019-05-30  Alan Modra  <amodra@gmail.com>
 469
 470         * testsuite/lib/binutils-common.exp (run_dump_test): Support
 471         tcl procedures for xfail args.
 472
 473 2019-05-29  Nick Clifton  <nickc@redhat.com>
 474
 475         * README-how-to-make-a-release: Add libctf to list of directories
 476         that need updates in their ChangeLogs.
 477
 478 2019-05-29  Nick Clifton  <nickc@redhat.com>
 479
 480         * configure.ac (LIBCTF): Export.  Set to empty for non-ELF based
 481         targets.
 482         (HAVE_LIBCTF): Define if libctf support is available.
 483         * Makefile.am (LIBCTF): Set value to @LIBCTF@.
 484         * objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
 485         defined.
 486         * readelf.c: Likewise.
 487         * configure: Regenerate.
 488         * Makefile.in: Regenerate.
 489         * config.in: Regenerate.
 490
 491 2019-05-28  Nick Alcock  <nick.alcock@oracle.com>
 492
 493         * MAINTAINERS: Add myself as CTF maintainer.
 494
 495 2019-05-28  Nick Alcock  <nick.alcock@oracle.com>
 496
 497         * objdump.c (ctf-api.h): New include.
 498         (dump_ctf_section_info): New variable.
 499         (dump_ctf_section_name): Likewise.
 500         (usage): Describe new options.
 501         (enum option_values): Add OPTION_CTF and OPTION_CTF_PARENT.
 502         (main): Use them to add --ctf and --ctf-parent.
 503         (read_section_stabs): Add new parameter, entsize_ptr.
 504         (find_stabs_section): Adjust accordingly.
 505         (make_ctfsect): New.
 506         (dump_ctf_indent_lines): New.
 507         (dump_ctf_archive_member): New.
 508         (dump_ctf): New.
 509         (dump_bfd): Call it.  Free resources afterwards.
 510         * readelf.c (ctf-api.h): New include.
 511         (CTF_DUMP): New.
 512         (static bfd_boolean do_ctf): Likewise.
 513         (dump_ctf_parent_name): Likewise.
 514         (dump_ctf_symtab_name): Likewise.
 515         (dump_ctf_strtab_name): Likewise.
 516         (OPTION_CTF_DUMP): Likewise.
 517         (OPTION_CTF_PARENT): Likewise.
 518         (OPTION_CTF_SYMBOLS): Likewise.
 519         (OPTION_CTF_STRINGS): Likewise.
 520         (options): Add them.
 521         (usage): Likewise.
 522         (parse_args): Handle the new options, requesting CTF_DUMP.
 523         (process_section_contents): Handle CTF_DUMP.
 524         (shdr_to_ctf_sect): New.
 525         (dump_ctf_indent_lines): New.
 526         (dump_section_as_ctf): New.
 527         (main): Free resources.
 528         * Makefile.am (LIBCTF): New variable.
 529         (objdump_DEPENDENCIES): Use it.
 530         (readelf_DEPENDENCIES): Likewise.
 531         (objdump_LDADD): Likewise.
 532         (readelf_LDADD): Likewise.
 533         * aclocal.m4: Regenerated.
 534         * Makefile.in: Likewise.
 535
 536         * doc/binutils.texi (objdump): Document the new options.
 537         (readelf): Likewise.
 538         * doc/ctf.options.texi: New.
 539         * doc/Makefile.in: Regenerated.
 540         * NEWS: Mention the new feature.
 541
 542 2019-05-27  Alan Modra  <amodra@gmail.com>
 543
 544         * readelf.c (process_section_groups): Continue processing groups
 545         when sh_entsize exceeds group size.
 546
 547 2019-05-24  Szabolcs Nagy  <szabolcs.nagy@arm.com>
 548
 549         * readelf.c (get_aarch64_dynamic_type): Handle DT_AARCH64_VARIANT_PCS.
 550         (get_aarch64_symbol_other): New, handles STO_AARCH64_VARIANT_PCS.
 551         (get_symbol_other): Call get_aarch64_symbol_other.
 552
 553 2019-05-24  Alan Modra  <amodra@gmail.com>
 554
 555         * objdump.c (disassemble_bytes): Set WIDE_OUTPUT in flags.
 556
 557 2019-05-23  Jose E. Marchesi  <jose.marchesi@oracle.com>
 558
 559         * MAINTAINERS: Add myself as the maintainer for BPF.
 560
 561 2019-05-23  Jose E. Marchesi  <jose.marchesi@oracle.com>
 562
 563         * readelf.c: Include elf/bpf.h.
 564         (guess_is_rela): Hanle EM_BPF.
 565         (dump_relocations): Likewise.
 566         (is_32bit_abs_reloc): Likewise.
 567         * testsuite/binutils-all/nm.exp: Add bpf-*-* to the list of
 568         ELF targets.
 569
 570 2019-05-21  Tamar Christina  <tamar.christina@arm.com>
 571
 572         * dwarf.c (dwarf_regnames_aarch64): Add SVE registers.
 573         * testsuite/binutils-all/aarch64/sve-dwarf-registers.d: New test.
 574         * testsuite/binutils-all/aarch64/sve-dwarf-registers.s: New test.
 575
 576 2019-05-20  Faraz Shahbazker  <fshahbazker@wavecomp.com>
 577
 578         PR 14798
 579         * testsuite/binutils-all/readelf.ss-mips: Update reference output.
 580         * testsuite/binutils-all/readelf.ss-tmips: Likewise.
 581
 582 2019-05-20  Nick Clifton  <nickc@redhat.com>
 583
 584         * po/ca.po: Updated Catalan translation.
 585
 586 2019-05-16  Andre Vieira  <andre.simoesdiasvieira@arm.com>
 587
 588         * NEWS: Mention Armv8.1-M Mainline and MVE.
 589
 590 2019-05-16  Andre Vieira  <andre.simoesdiasvieira@arm.com>
 591
 592         * readelf.c (arm_attr_tag_MVE_arch): New array for Tag_MVE_arch values.
 593         (arm_attr_public_tag arm_attr_public_tags): Add case for Tag_MVE_arch.
 594
 595 2019-05-14  Jamey Hicks  <jamey.hicks@gmail.com>
 596
 597         PR 19921
 598         * objcopy.c: Add new option --verilog-data-width.  Use it to set
 599         the value of VerilogDataWidth.
 600         * doc/binutils.texi: Document the new option.
 601         * testsuite/binutils-all/objcopy.exp: Run tests of new option.
 602         * testsuite/binutils-all/verilog-1.hex: New file.
 603         * testsuite/binutils-all/verilog-2.hex: New file.
 604         * testsuite/binutils-all/verilog-4.hex: New file.
 605         * testsuite/binutils-all/verilog-8.hex: New file.
 606         * NEWS: Mention the new feature.
 607
 608 2019-05-10  Alan Modra  <amodra@gmail.com>
 609
 610         * testsuite/binutils-all/objdump.exp (test_objdump_disas_limited),
 611         (test_objdump_content_limited): Add text arg, use in place of .text.
 612         (bintest_signed.o): Call get_standard_section_names for name of
 613         text section.
 614
 615 2019-05-08  Faraz Shahbazker  <fshahbazker@wavecomp.com>
 616
 617         * objdump.c (sign_extend_address): New function.
 618         (dump_bfd): Sign-extend user-specified start/stop addresses
 619         for targets that need it.
 620         * testsuite/binutils-all/objdump.exp: Add tests for objdump
 621         with start and stop addresses in higher address ranges.
 622
 623 2019-05-01  Matthew Malcomson  <matthew.malcomson@arm.com>
 624
 625         * testsuite/binutils-all/objdump.exp: Correct executable
 626         spelling.
 627         * testsuite/binutils-all/compress.exp: Likewise.
 628
 629 2019-05-01  Nick Clifton  <nickc@redhat.com>
 630
 631         PR 24507
 632         * nm.c: (print_format): New variable.
 633         (value_format_32bit, value_format_64bit): Delete.
 634         (set_print_radix): Remove code to alter value_format strings.
 635         (set_output_format): Record chosen format in print_format.
 636         (get_print_format): New function - constructs a printf formatting
 637         string according to the requirements of size, radix, and output
 638         format.
 639         (print_value): Use get_print_format.
 640         * testsuite/binutils-all/nm.exp: Add tests of "nm --format=posix"
 641         and "nm -t d".
 642
 643 2019-04-30  Alan Modra  <amodra@gmail.com>
 644
 645         * wrstabs.c (stab_start_class_type): Add assert to work around
 646         gcc9 warning.  Tidy.
 647
 648 2019-04-24  Nick Clifton  <nickc@redhat.com>
 649
 650         * objcopy.c (strip_main): Do not enable note merging by default if
 651         just stripping debug or dwo information.
 652         * doc/binutils.texi (strip): Update documentation.
 653
 654 2019-04-23  Nick Clifton  <nickc@redhat.com>
 655
 656         * README-how-to-make-a-release: Add note to update the symbolic
 657         link from "docs" to "docs-2.x" on the sourceware website.
 658
 659 2019-04-16  Alan Modra  <amodra@gmail.com>
 660
 661         * testsuite/binutils-all/copy-2.d: Don't run for ns32k-*-*.
 662         * testsuite/binutils-all/copy-3.d: Likewise.
 663
 664 2019-04-15  Thomas Preud'homme  <thomas.preudhomme@arm.com>
 665
 666         * readelf.c (arm_attr_tag_CPU_arch): Add entry for Armv8.1-M Mainline.
 667
 668 2019-04-08  H.J. Lu  <hongjiu.lu@intel.com>
 669
 670         * readelf.c (decode_x86_isa): Handle
 671         GNU_PROPERTY_X86_ISA_1_AVX512_BF16.
 672         * testsuite/binutils-all/i386/pr21231b.d: Updated.
 673         * testsuite/binutils-all/x86-64/pr21231b.d: Likewise.
 674
 675 2019-04-08  H.J. Lu  <hongjiu.lu@intel.com>
 676
 677         * testsuite/binutils-all/nm.exp: Count i386-moss as ELF.
 678
 679 2019-03-26  Tamar Christina  <tamar.christina@arm.com>
 680
 681         * testsuite/binutils-all/aarch64/in-order-all.d: Update.
 682         * testsuite/binutils-all/aarch64/in-order.d: Likewise.
 683         * testsuite/binutils-all/aarch64/out-of-order-all.d: Likewise.
 684         * testsuite/binutils-all/aarch64/out-of-order.d: Likewise.
 685         * testsuite/binutils-all/aarch64/out-of-order.s: Likewise.
 686         * testsuite/binutils-all/arm/in-order-all.d: Likewise.
 687         * testsuite/binutils-all/arm/in-order.d: Likewise.
 688         * testsuite/binutils-all/arm/out-of-order-all.d: Likewise.
 689         * testsuite/binutils-all/arm/out-of-order.d: Likewise.
 690         * testsuite/binutils-all/arm/out-of-order.s: Likewise.
 691
 692 2019-03-26  Nick Clifton  <nickc@redhat.com>
 693
 694         * MAINTAINERS: Take over Dave Brolley's maintainerships for FR30,
 695         FRV and MEP.
 696
 697 2019-03-26  Alan Modra  <amodra@gmail.com>
 698
 699         * objdump.c (dump_relocs_in_section): Warning fix.
 700
 701 2019-03-25  Tamar Christina  <tamar.christina@arm.com>
 702
 703         * testsuite/binutils-all/arm/in-order-all.d: New test.
 704         * testsuite/binutils-all/arm/in-order.d: New test.
 705         * testsuite/binutils-all/arm/objdump.exp: Support .d tests.
 706         * testsuite/binutils-all/arm/out-of-order-all.d: New test.
 707         * testsuite/binutils-all/arm/out-of-order.T: New test.
 708         * testsuite/binutils-all/arm/out-of-order.d: New test.
 709         * testsuite/binutils-all/arm/out-of-order.s: New test.
 710
 711
 712 2019-03-25  Tamar Christina  <tamar.christina@arm.com>
 713
 714         * testsuite/binutils-all/aarch64/in-order-all.d: New test.
 715         * testsuite/binutils-all/aarch64/out-of-order-all.d: New test.
 716         * testsuite/binutils-all/aarch64/out-of-order.d:
 717
 718 2019-03-25  Tamar Christina  <tamar.christina@arm.com>
 719
 720         * testsuite/binutils-all/aarch64/in-order.d: New test.
 721         * testsuite/binutils-all/aarch64/out-of-order.d: Disassemble data as
 722         well.
 723
 724 2019-03-25  Tamar Christina  <tamar.christina@arm.com>
 725
 726         * objdump.c (disassemble_bytes): Pass stop_offset.
 727         * testsuite/binutils-all/aarch64/out-of-order.T: New test.
 728         * testsuite/binutils-all/aarch64/out-of-order.d: New test.
 729         * testsuite/binutils-all/aarch64/out-of-order.s: New test.
 730
 731 2019-03-19  Nick Clifton  <nickc@redhat.com>
 732
 733         PR 24360
 734         * objdump.c (load_specific_debug_section): Check that the amount
 735         of memory to be allocated matches the size of the section.
 736
 737 2019-03-13  Sudakshina Das  <sudi.das@arm.com>
 738
 739         * readelf.c (get_aarch64_dynamic_type): Add case for
 740         DT_AARCH64_PAC_PLT.
 741         (dynamic_section_aarch64_val): Likewise.
 742
 743 2019-03-13  Sudakshina Das  <sudi.das@arm.com>
 744             Szabolcs Nagy  <szabolcs.nagy@arm.com>
 745
 746         * readelf.c (get_aarch64_dynamic_type): New.
 747         (get_dynamic_type): Use above for EM_AARCH64.
 748         (dynamic_section_aarch64_val): New.
 749         (process_dynamic_section): Use above for EM_AARCH64.
 750
 751 2019-03-13  Sudakshina Das  <sudi.das@arm.com>
 752
 753         * readelf.c (decode_aarch64_feature_1_and): New.
 754         (print_gnu_property_note): Add case for AArch64 gnu notes.
 755
 756 2019-03-12  Alan Modra  <amodra@gmail.com>
 757
 758         * objdump.c (load_specific_debug_section): Don't compare section
 759         size against file size.
 760         (dump_relocs_in_section): Don't compare reloc size against file size.
 761         Print "failed to read relocs" on bfd_get_reloc_upper_bound error.
 762
 763 2019-03-05  Nick Clifton  <nickc@redhat.com>
 764
 765         PR 24295
 766         * doc/binutils.texi (ar cmdline): Fix spelling mistake.
 767
 768 2019-03-05  Nick Clifton  <nickc@redhat.com>
 769
 770         * po/sv.po: Updated Swedish translation.
 771
 772 2019-03-05  Matthew Malcomson  <matthew.malcomson@arm.com>
 773
 774         PR 24287
 775         * testsuite/lib/binutils-common.exp (run_dump_test): Replace a use
 776         of "lmap" with a "foreach" loop.
 777
 778 2019-03-04  Nick Clifton  <nickc@redhat.com>
 779
 780         PR 24281
 781         * objcopy.c (copy_archive): Do not copy thin  archives.
 782
 783 2019-02-27  Matthew Malcomson  <matthew.malcomson@arm.com>
 784
 785         * testsuite/lib/binutils-common.exp: Allow multiple "as" lines.
 786
 787 2019-02-25  Nick Clifton  <nickc@redhat.com>
 788
 789         * objdump.c (sym_ok): New function.
 790         (find_symbol_for_address): Use new function.
 791         (disassemble_section): Compare sections by name, not pointer.
 792         (dump_dwarf): Move code to initialise byte_get pointer and iterate
 793         over separate debug files from here to ...
 794         (dump_bfd): ... here.  Add parameter indicating that a separate
 795         debug info file is being dumped.  For main file, pull in the
 796         symbol tables from all separate debug info files.
 797         (display_object): Update call to dump_bfd.
 798         * doc/binutils.texi: Document extened behaviour of the
 799         --dwarf=follow-links option.
 800         * NEWS: Mention this new feature.
 801         * testsuite/binutils-all/objdump.WK2: Update expected output.
 802         * testsuite/binutils-all/objdump.exp (test_follow_debuglink): Add
 803         options and dump file parameters.
 804         Add extra test.
 805         * testsuite/binutils-all/objdump.WK3: New file.
 806         * testsuite/binutils-all/readelf.exp: Change expected output for
 807         readelf -wKis test.
 808         * testsuite/binutils-all/readelf.wKis: New file.
 809
 810 2019-02-22  Nick Clifton  <nickc@redhat.com>
 811
 812         PR 23843
 813         * dwarf.h (struct separate_info): New structure for containing
 814         information on separate debug info files.
 815         * dwarf.c (struct dwo_info): New structure for containing dwo
 816         links.
 817         (first_dwo_info): Chain of dwo_info structures.
 818         (first_separate_file): Chain of separate_info structures.
 819         (separate_debug_file, separate_debug_filename): Delete.
 820         (fetch_alt_indirect_string): Scan all separate debug info files
 821         for the requested string.
 822         (add_dwo_info): New function.
 823         (add_dwo_name): New function.
 824         (add_dwo_dir): New function.
 825         (add_dwo_id: New function.
 826         (free_dwo_info): New function.
 827         (read_and_display_attr_value): Store DWO data using the new
 828         functions.
 829         (load_debug_section_with_follow): If necessary, scan the list of
 830         separate debug info files for the requested section.
 831         (add_separate_debug_file): New function.
 832         (load_separate_debug_info): Call add_separate_debug_file to store
 833         the information on the newly loaded file.
 834         (load_dwo_file): Likewise.
 835         (load_separate_debif_file): Rename to load_separate_debug_files.
 836         Change return type to boolean.  If following links then attempt to
 837         load all separate debug info files, not just the first one.
 838         (free_debug_memory): Release memory in dwo_info and separate_info
 839         chains.
 840         * objdump.c (dump_dwarf): Iterate over all loaded debg info files.
 841         * readelf.c (process_object): Likewise.
 842         * doc/debug.options.texi: Update descriptions of links and
 843         follow-links options.
 844         * testsuite/binutils-all/objdump.WK2: Update expected output.
 845         * testsuite/binutils-all/readelf.k2: Likewise.
 846         * NEWS: Announce the new feature.
 847
 848 2019-02-21  Nick Clifton  <nickc@redhat.com>
 849
 850         PR 24247
 851         * unwind-ia64.c: Include sysdep.h.
 852         (unw_decode_x1): Check current pointer against end pointer before
 853         accessing memory.
 854         (unw_decode_x2): Likewise.
 855         (unw_decode_x3): Likewise.
 856         (unw_decode_x4): Likewise.
 857         (unw_decode_r2): Likewise.
 858         (unw_decode_p2_p5): Likewise.
 859         (unw_decode_p7_p10): Likewise.
 860         (unw_decode): Likewise.
 861
 862 2019-02-20  Nick Clifton  <nickc@redhat.com>
 863
 864         PR 24246
 865         * readelf.c (print_stapsdt_note): Harden against corrupt notes.
 866
 867         PR 24244
 868         * unwind-ia64.c (unw_decode_uleb128): Add end parameter, use it to
 869         prevent walking off the end of the buffer.
 870         (unw_decode_x1): Add end paramter, pass it to unw_decode_uleb128.
 871         (unw_decode_x2): Likewise.
 872         (unw_decode_x3): Likewise.
 873         (unw_decode_x4): Likewise.
 874         (unw_decode_r2): Pass the end parameter to unw_decode_uleb128.
 875         (unw_decode_r3): Likewise.
 876         (unw_decode_p7_p10): Likewise.
 877         (unw_decode_b2): Likewise.
 878         (unw_decode_b3_x4): Likewise.
 879
 880         PR 24243
 881         * readelf.c (process_mips_specific): Check for an options section
 882         that is too small to even contain a single option.
 883
 884         PR 24242
 885         * readelf.c (print_ia64_vms_note): Harden against corrupt notes.
 886
 887 2019-02-20  Alan Modra  <amodra@gmail.com>
 888
 889         PR 24132
 890         PR 24138
 891         * readelf.c (get_data): Avoid possibility of overflow when
 892         checking for a read that may extend past end of file.
 893         (process_program_headers): Likewise.
 894
 895 2019-02-20  Alan Modra  <amodra@gmail.com>
 896
 897         PR 24233
 898         * objdump.c (dump_bfd_private_header): Print warning if
 899         bfd_print_private_bfd_data returns false.
 900
 901 2019-02-12  Nick Clifton  <nickc@redhat.com>
 902
 903         PR 23440
 904         * README-how-to-make-a-release: Use git clean to delete spurious
 905         files from the local source repository.
 906
 907 2019-02-08  Andrew Burgess  <andrew.burgess@embecosm.com>
 908
 909         * size.c (berkeley_format): Delete.
 910         (enum output_format): New enum.
 911         (selected_output_format): New variable.
 912         (usage): Update to mention GNU format.
 913         (main): Update to extract options, and select format as needed.
 914         Handle GNU format where needed.
 915         (berkeley_sum): Renamed to...
 916         (berkeley_or_gnu_sum): ...this, and updated to handle both formats.
 917         (berkeley_format): Renamed to...
 918         (berkeley_or_gnu_format): ...this, and updated to handle both
 919         formats.
 920         (print_sizes): Handle GNU format.
 921         * doc/binutils.texi (size): Document new GNU format.
 922         * testsuite/binutils-all/size.exp: Add test of extended
 923         functionality.
 924         * NEWS: Mention new functionality.
 925
 926 2019-02-08  Andrew Burgess  <andrew.burgess@embecosm.com>
 927
 928         * doc/binutils.texi (size): Update example output for Berkeley
 929         format output.
 930
 931 2019-02-07  Nick Clifton  <nickc@redhat.com>
 932
 933         * README-how-to-make-a-release: Add a note about updating the
 934         obsolete targets in the bfd/config.bfd file.
 935
 936 2019-02-04  Nick Clifton  <nickc@redhat.com>
 937
 938         * README-how-to-make-a-release: Add more notes on making a release.
 939
 940 2019-01-25  Nick Clifton  <nickc@redhat.com>
 941
 942         PR 24131
 943         * readelf.c (process_notes_at): Prevent an illegal memory access
 944         when the note's namesize is zero.
 945         (decode_tic6x_unwind_bytecode): Add code to handle the case where
 946         no registers are specified in a frame pop instruction.
 947
 948 2019-01-25  Nick Clifton  <nickc@redhat.com>
 949
 950         * po/bg.po: Updated Bulgarian translation.
 951
 952 2019-01-23  Nick Clifton  <nickc@redhat.com>
 953
 954         * po/fr.po: Updated French translation.
 955         * po/pt.po: Updated Portuguese translation.
 956
 957 2019-01-21  Nick Clifton  <nickc@redhat.com>
 958
 959         * po/uk.po: Updated Ukranian translation.
 960
 961 2019-01-19  Nick Clifton  <nickc@redhat.com>
 962
 963         * configure: Regenerate.
 964         * binutils/po/binutils.pot.
 965
 966         * README-how-to-make-a-release: Update description on how to make
 967         a branch.
 968
 969 2018-06-24  Nick Clifton  <nickc@redhat.com>
 970
 971         2.32 branch created.
 972
 973 2019-01-17  Nick Clifton  <nickc@redhat.com>
 974
 975         * objdump.c (disassemble_section): When disassembling from a
 976         symbol only stop at the next symbol if the original symbol was not
 977         a function symbol.  Otherwise continue disassembling until a new
 978         function is reached.
 979         * testsuite/binutils-all/objdump.exp: Add tests of extended
 980         functionality.
 981         * testsuite/binutils-all/disasm.s: New test source file.
 982
 983 2019-01-16  Kito Cheng  <kito@andestech.com>
 984             Nelson Chu  <nelson@andestech.com>
 985
 986         * readelf.c (get_riscv_section_type_name): New function.
 987         (get_section_type_name): Add handler for RISC-V.
 988         (riscv_attr_tag_t): Declare.
 989         (riscv_attr_tag): New.
 990         (display_riscv_attribute): New function.
 991         (process_attributes): Add handler for RISC-V.
 992         * testsuite/binutils-all/strip-3.d: Remove .riscv.attribute
 993         section.
 994
 995 2019-01-10  Nick Clifton  <nickc@redhat.com>
 996
 997         PR 23963
 998         * objdump.c (sanitize_string): New function.  Removes control
 999         characters from symbol names.
1000         (dump_section_header): Use new function.
1001         (objdump_print_symname): Likewise.
1002         (objdump_print_addr_with_sym): Likewise.
1003         (show_line): Likewise.
1004         (disassemble_bytes): Likewise.
1005         (disassemble_section): Likewise.
1006         (load_specific_debug_section): Likewise.
1007         (read_section_stabs): Likewise.
1008         (print_section_stabs): Likewise.
1009         (dump_section): Likewise.
1010         (dump_reloc_set): Likewise.
1011         (dump_relocs_in_section): Likewise.
1012         (dump_bfd): Likewise.
1013         (display_any_bfd): Likewise.
1014
1015 2019-01-09  Nick Clifton  <nickc@redhat.com>
1016
1017         PR 24049
1018         * readelf.c (process_archive): Use arch.file_name in error
1019         messages until the qualified name is available.
1020
1021 2019-01-09  Andrew Paprocki  <andrew@ishiboo.com>
1022
1023         * configure: Regenerate.
1024
1025 2019-01-09  Alan Modra  <amodra@gmail.com>
1026
1027         * testsuite/binutils-all/cxxfilt.exp: Pass --no-strip-underscores
1028         unconditionally to tests needing the option rather than via a
1029         list of targets.
1030
1031 2019-01-08  Nick Clifton  <nickc@redhat.com>
1032
1033         PR 24044
1034         * cxxfilt.c (hp_symbol_characters): Delete.
1035         (main): Remove depcreated demangling styles.
1036         * stabs.c (parse_stab_argtypes): Remove support for old gnu v2
1037         demangling opnames.
1038         * testsuite/binutils-all/cxxfilt.exp: Use the
1039         --no-strip-underscore option for targets that do prefix their
1040         symbols with underscores.
1041         Update tests to eliminate those that use gnu v2 encoding.
1042
1043 2019-01-08  Tamar Christina  <tamar.christina@arm.com>
1044
1045         PR 24065
1046         * testsuite/binutils-all/copy-6.d: New test.
1047         * testsuite/binutils-all/objcopy.exp: Use it.
1048
1049 2019-01-08  Alan Modra  <amodra@gmail.com>
1050
1051         * testsuite/lib/binutils-common.exp (run_dump_test): Don't prepend
1052         $srcdir/$subdir to source file name if it starts with "./".
1053
1054 2019-01-05  Yoshinori Sato <ysato@users.sourceforge.jp>
1055
1056         * readelf.c (get_machine_flags): Add RXv3 output.
1057
1058 2019-01-04  Nick Clifton  <nickc@redhat.com>
1059
1060         PR 24005
1061         * objdump.c (load_specific_debug_section): Check for integer
1062         overflow before attempting to allocate contents.
1063
1064 2019-01-04  Nick Clifton  <nickc@redhat.com>
1065
1066         PR 24001
1067         * objcopy.c (copy_object): Free dhandle after writing out the
1068         debug information.
1069         * objdump.c (dump_bfd): Free dhandle after printing out the debug
1070         information.
1071
1072
1073 2019-01-01  Alan Modra  <amodra@gmail.com>
1074
1075         Update year range in copyright notice of all files.
1076
1077 For older changes see ChangeLog-2018
1078 \f
1079 Copyright (C) 2019 Free Software Foundation, Inc.
1080
1081 Copying and distribution of this file, with or without modification,
1082 are permitted in any medium without royalty provided the copyright
1083 notice and this notice are preserved.
1084
1085 Local Variables:
1086 mode: change-log
1087 left-margin: 8
1088 fill-column: 74
1089 version-control: never
1090 End: