2006-01-01 Roger Sayle <roger@eyesopen.com>

[deliverable/binutils-gdb.git] / binutils / ChangeLog

2005-12-30  Jie Zhang  <jie.zhang@analog.com>

        * readelf.c (get_machine_name): Add case for Blackfin.

2005-12-27  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am: Run "make dep-am".
        (Makefile): Remove dependency.
        * Makefile.in: Regenerate.

2005-12-26  Jan-Benedict Glaw  <jbglaw@lug-owl.de>

        * MAINTAINERS: Add myself as VAX maintainer.

2005-12-22  Randolph Chung  <tausq@debian.org>

        * rddbg.c (read_section_stabs_debugging_info): Add $GDB_SYMBOLS$
        entry to names[] array for SOM binaries.

2005-12-21  H.J. Lu  <hjl@gnu.org>

        * MAINTAINERS: Add myself as x86_64 maintainer.

2005-12-16  Nathan Sidwell  <nathan@codesourcery.com>

        Second part of ms1 to mt renaming.
        * readelf.c (guess_is_rela): Use EM_MT.
        (dump_relocations, get_machine_name): Adjust.

2005-12-12  Nathan Sidwell  <nathan@codesourcery.com>

        * Makefile.am: Replace ms1 files with mt files.
        * Makefile.in: Rebuilt.
        * readelf.c (elf/mt.h): Adjust #include.

2005-11-30  Nick Clifton  <nickc@redhat.com>

        * configure.in (ALL_LINGUAS): Add fi.
        * configure: Regenerate.
        * po/fi.po: New file: Finnish translation.

2005-11-21  Arnold Metselaar <arnoldm@sourceware.org>

        * MAINTAINERS: add myself as Z80 maintainer

2005-11-17  Andrew Haley  <aph@redhat.com>

        * cxxfilt.c (main): Flush output at newline.

2005-11-16  Mark Mitchell  <mark@codesourcery.com>

        * doc/binutils.texi: Include config.texi and @file documentation
        for manual pages.

2005-11-15  Jan Beulich  <jbeulich@novell.com>

        * objcopy.c (keep_file_symbols): New.
        (enum command_line_switch): Add OPTION_KEEP_FILE_SYMBOLS.
        (strip_options): Add --keep-file-symbols.
        (copy_options): Likewise.
        (copy_usage): Likewise.
        (strip_usage): Likewise.
        (filter_symbols): Act upon keep_file_symbols.
        (strip_main): Handle OPTION_KEEP_FILE_SYMBOLS.
        (copy_main): Likewise.
        * doc/binutils.texi: Document --keep-file-symbols for objcopy
        and strip.

2005-11-14  Daniel Jacobowitz  <dan@codesourcery.com>

        * readelf.c (struct dump_list_entry, request_dump_byname)
        (initialise_dumps_byname): New.
        (parse_args): Call request_dump_byname.
        (process_section_contents): Call initialise_dumps_byname.
        * doc/binutils.texi (readelf): Mention -x NAME.
        * NEWS: Likewise.

2005-11-11  Nick Clifton  <nickc@redhat.com>

        PR 1150
        * readelf.c (get_mips_symbol_other): New function.
        (get_symbol_other): New function.
        (process_symbol_table): Call get_symbol_other() to get a
        description of the st_other field if it contains more information
        than just the visibility.

2005-11-07  Steve Ellcey  <sje@cup.hp.com>

        * configure: Regenerate after modifying bfd/warning.m4.

2005-10-30  H.J. Lu  <hongjiu.lu@intel.com>

        * Makefile.am: Run "make dep-am".
        * Makefile.in: Regenerated.

        * dep-in.sed: Replace " ./" with " ".

2005-10-25  Alan Modra  <amodra@bigpond.net.au>

        * po/POTFILES.in: Regenerate.
        * po/binutils.pot: Regenerate.

2005-10-24  Bernd Schmidt  <bernd.schmidt@analog.com>

        * MAINTAINERS: Add self as BFIN maintainer.

2005-10-18  Jie Zhang  <jie.zhang@analog.com>

        * MAINTAINERS: Add self as BFIN maintainer.

2005-10-11  Danny Smith  <dannysmith@users.sourceforge.net>

        * rclex.l (handle quotes): Stop parsing hex notation escaped
        chars after the first two digits,

2005-10-11  Nick Clifton  <nickc@redhat.com>

        PR binutils/1437
        * cxxfilt.c (flags): Remove DMGL_TYPES;
        (long_options): Rename --no-types to --types.
        (usage): Likewise.
        (demangle_it): Add a comment describing why _ and $ prefixes are
        skipped.  Use printf rather than puts to emit the demangled output
        in order to avoid emitting a new line character.
        (main): Have the -t flag enable type demangling.
        Emit a newline after every demangled command line argument.
        Copy whitespace from stdin to stdout.
        * doc/binutils.texi (c++filt): Document the change to the -t
        switch.
        Document why demangling names on the command line is slightly
        different to demangling names read from the standard input.

2005-10-10  Mark Mitchell  <mark@codesourcery.com>

        * doc/Makefile.am (config.texi): Set top_srcdir.
        * doc/Makefile.in: Regenerated.
        * doc/binutils.texi: Use at-file.texi from libiberty.

2005-10-10  H.J. Lu  <hongjiu.lu@intel.com>

        PR binutils/1436
        * readelf.c (ABSADDR): New.
        (dump_ia64_unwind): Use ABSADDR to get the unwind info address.

2005-10-10  Thomas Weidenmueller  <w3seek@reactos.com>

        * resbin.c (res_to_bin_accelerator): Place the terminating NUL at
        the correct location in the bindata structure.

2005-10-10  Bryce Schober  <bryce.schober@dynonavionics.com>

        * doc/binutils.texi (objdump): Fix typo: -reg-name-std should be
        -reg-names-std.

2005-10-04  Nick Clifton  <nickc@redhat.com>

        * cxxfilt.c: Treat mangled names specified on the command line in
        the same way as mangled names read from stdin.
        Add -i switch to disable the display of implementation details.
        Add -t switch to disable the demangling of types.
        * NEWS: Mention the new switches.
        * doc/binutils.texi (cxxfilt): Document the -i and -t switches.

2005-10-03  Mark Mitchell  <mark@codesourcery.com>

        * addr2line.c (usage): Document @file.
        * ar.c (usage): Likewise.
        * coffdump (usage): Likewise.
        * cxxfilt.c (usage): Likewise.
        * dlltool.c (usage): Likewise.
        * dllwrap.c (usage): Likewise.
        * nlmconv.c (usage): Likewise.
        * nm.c (usage): Likewise.
        * objcopy.c (usage): Likewise.
        * objdump.c (usage): Likewise.
        * readelf.c (usage): Likewise.
        * size.c (usage): Likeise.
        * srconv.c (usage): Likewise.
        * strings.c (usage): Likewise.
        * windres.c (usage): Likewise.
        * doc/binutils.texi: Add section on common options. 

2005-10-03  H.J. Lu  <hongjiu.lu@intel.com>

        * NEWS: Mention -W/--dwarf.

        * doc/binutils.texi: Document -W/--dwarf for objdump.

2005-10-01  Paul Brook  <paul@codesourcery.com>

        * readelf.c (arm_attr_tag_CPU_arch, arm_attr_tag_ARM_ISA_use,
        arm_attr_tag_THUMB_ISA_use, arm_attr_tag_VFP_arch,
        arm_attr_tag_WMMX_arch, arm_attr_tag_NEON_arch,
        arm_attr_tag_ABI_PCS_config, arm_attr_tag_ABI_PCS_R9_use,
        arm_attr_tag_ABI_PCS_RW_data, arm_attr_tag_ABI_PCS_RO_DATA,
        arm_attr_tag_ABI_PCS_GOT_use, arm_attr_tag_ABI_PCS_wchar_t,
        arm_attr_tag_ABI_FP_rounding, arm_attr_tag_ABI_FP_denormal,
        arm_attr_tag_ABI_FP_exceptions, arm_attr_tag_ABI_FP_user_exceptions,
        arm_attr_tag_ABI_FP_number_model, arm_attr_tag_ABI_align8_needed,
        arm_attr_tag_ABI_align8_preserved, arm_attr_tag_ABI_enum_size,
        arm_attr_tag_ABI_HardFP_use, arm_attr_tag_ABI_VFP_args,
        arm_attr_tag_ABI_WMMX_args, arm_attr_tag_ABI_optimization_goals,
        arm_attr_tag_ABI_FP_optimization_goals, arm_attr_public_tags): New.
        (display_arm_attribute, process_arm_specific): New functions.
        (process_arch_specific): Add EM_ARM.

2005-09-30  Mark Mitchell  <mark@codesourcery.com>

        * dlltool.c (main): Fix typo.
        * windres.c (main): Likewise.

2005-09-30  H.J. Lu  <hongjiu.lu@intel.com>

        * Makefile.in: Regenerated.

2005-09-30  H.J. Lu  <hongjiu.lu@intel.com>

        * sysinfo.y (main): Undo last change.

2005-08-30  Mark Mitchell  <mark@codesourcery.com>

        * addr2line.c (main): Use expandargv.
        * ar.c (main): Likewise.
        * coffdump.c (main): Likewise.
        * cxxfilt.c (main): Likewise.
        * dlltool.c (main): Likewise.
        * dllwrap.c (main): Likewise.
        * nlmconv.c (main): Likewise.
        * nm.c (main): Likewise.
        * objcopy.c (main): Likewise.
        * objdump.c (main): Likewise.
        * readelf.c (main): Likewise.
        * size.c (main): Likeiwse.
        * srcconv.c (main): Likewise.
        * strings.c (main): Likewise.
        * sysdump.c (main): Likewise.
        * sysinfo.y (main): Likewise.
        * windres.c (main): Likewise.
        
2005-09-30  H.J. Lu  <hongjiu.lu@intel.com>

        * Makefile.am: Run "make dep-am".
        * Makefile.in: Regenerated.
        * aclocal.m4: Likewise.

2005-09-30  Catherine Moore  <clm@cm00re.com>

        * Makefile.am: Bfin support.
        * Makefile.in: Regenerated.
        * aclocal.m4: Regenerated.
        * readelf.c (elf/bfin.h): Include.
        (guess_is_rela): EM_BLACKFIN support.
        (dump_relocations): Likewise.

2005-09-30  H.J. Lu  <hongjiu.lu@intel.com>

        * dwarf.c (fetch_indirect_string): Adjust for section address.
        (process_debug_info): Likewise.
        (display_debug_loc): Likewise.
        (display_debug_ranges): Likewise.

        * objdump.c (mach_o_dwarf_sections): New.
        (generic_dwarf_sections): Likewise.
        (check_mach_o_dwarf): Likewise.
        (dump_dwarf): Call check_mach_o_dwarf.

2005-09-30  H.J. Lu  <hongjiu.lu@intel.com>

        * Makefile.am (objdump_SOURCES): Add dwarf.c.
        * Makefile.in: Regenerated.

        * objdump.c: Include "dwarf.h".
        (usage): Add -W/--dwarf.
        (long_options): Likewise.
        (dump_dwarf_section_info): New.
        (load_debug_section): Likewise.
        (free_debug_section): Likewise.
        (dump_dwarf_section): Likewise.
        (dump_dwarf): Likewise.
        (dump_bfd): Load symbol table and call dump_dwarf if
        dump_dwarf_section_info isn't zero.
        (main): Handle -W/--dwarf.

2005-09-30  H.J. Lu  <hongjiu.lu@intel.com>

        * readelf.c: Reordered.
        (is_relocatable): New.
        (dwarf_section): New structure for DWARF section.
        (load_debug_section): New.
        (free_debug_section): Likewise.
        (debug_str_section): Likewise.
        (debug_abbrev_section): Likewise.
        (debug_str_contents): Removed.
        (debug_str_size): Likewise.
        (debug_loc_contents): Likewise.
        (debug_loc_size): Likewise.
        (debug_range_contents): Likewise.
        (debug_range_size): Likewise.
        (load_debug_str): Likewise.
        (free_debug_str): Likewise.
        (load_debug_loc): Likewise.
        (free_debug_loc): Likewise.
        (load_debug_arange): Likewise.
        (free_debug_arange): Likewise.
        (load_debug_abbrev): Likewise.
        (free_debug_abbrev): Likewise.
        (fetch_indirect_string): Updated.
        (debug_apply_rela_addends): Likewise.
        (process_debug_info): Likewise.
        (get_debug_info): Likewise.
        (display_debug_lines): Likewise.
        (display_debug_pubnames): Likewise.
        (display_debug_macinfo): Likewise.
        (display_debug_abbrev): Likewise.
        (display_debug_loc): Likewise.
        (display_debug_str): Likewise.
        (display_debug_info): Likewise.
        (display_debug_aranges): Likewise.
        (display_debug_ranges): Likewise.
        (display_debug_frames): Likewise.
        (display_debug_not_supported): Likewise.
        (debug_displays): Likewise.
        (display_debug_section): Likewise.
        (get_file_header): Set is_relocatable.

2005-09-30  H.J. Lu  <hongjiu.lu@intel.com>

        * readelf.c (debug_apply_rela_addends): Relocate the whole
        section.
        (process_debug_info): Don't call debug_apply_rela_addends.
        (display_debug_frames): Likewise.
        (get_debug_info): Call debug_apply_rela_addends.
        (debug_displays): Add the "relocate" field.
        (display_debug_section): Call debug_apply_rela_addends if
        needed.

2005-09-30  Matthias Kurz  <mk@baerlap.north.de>

        * bucomm.h: Prevent the inclusion of <libintl.h> from the Solaris
        version of <locale.h> when ENABLE_NLS is not defined.

2005-09-26  Mark Mitchell  <mark@codesourcery.com>

        * BRANCHES: Mention binutils-csl-gxxpro-3_4-branch.

2005-09-20  Richard Henderson  <rth@redhat.com>

        * readelf.c (display_debug_lines): Use unsigned long for address
        increments.  Use 0x prefix for all hex numbers.

2005-09-09  Richard Earnshaw  <richard.earnshaw@arm.com>

        * readelf.c (get_arm_section_type_name): Add SHT_ARM_PREEMPTMAP and
        SHT_ARM_ATTRIBUTES.

2005-09-07  H.J. Lu  <hongjiu.lu@intel.com>

        * readelf.c (get_elf_section_flags): Handle 64bit sh_flags.

2005-09-02  H.J. Lu  <hongjiu.lu@intel.com>

        * readelf.c (debug_abbrev_contents): New.
        (debug_abbrev_size): Likewise.
        (load_debug_abbrev): Likewise.
        (free_debug_abbrev): Likewise.
        (process_debug_info): Use them.

2005-08-17  H.J. Lu  <hongjiu.lu@intel.com>

        PR binutils/1179
        * objdump.c (disassemble_bytes): Don't adjust
        adjust_section_vma.
        (adjust_addresses): Don't adjust vma for debugging section.
        Adjust lma only for relocatable files.
        (dump_bfd): Tell adjust_addresses if it is a relocatable file.

2005-08-16  H.J. Lu  <hongjiu.lu@intel.com>

        * bucomm.h (stpcpy): Declare if HAVE_DECL_STPCPY isn't defined.

        * configure.in (AC_GNU_SOURCE): Added.
        (AC_CHECK_DECLS): Add stpcpy.
        * configure: Regenerated.
        * config.in: Likewise.

2005-08-16  Jakub Jelinek  <jakub@redhat.com>

        * unwind-ia64.c (UNW_DEC_SPILL_SPREL, UNW_DEC_SPILL_PSPREL,
        UNW_DEC_RESTORE, UNW_DEC_SPILL_REG): Increase {,ab,t}regname
        buffer sizes.

2005-08-15  Daniel Jacobowitz  <dan@codesourcery.com>

        * doc/binutils.texi (objdump): Document -M e300.

2005-08-14  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        * readelf.c (slurp_hppa_unwind_table): Fix entry size on hppa64-hpux.
        Don't access table entries past the end of the table.

2005-08-13  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        * readelf.c (get_parisc_segment_type): Handle PT_PARISC_WEAKORDER.
        (get_parisc_section_type_name): Handle SHT_PARISC_DLKM.

2005-08-11  H.J. Lu  <hongjiu.lu@intel.com>

        * NEWS: Mention "-t/--section-details" and
        "-N/--full-section-name".

        * doc/binutils.texi: Document "-t/--section-details". Remove
        "-N/--full-section-name".

        * readelf.c (do_full_section_name): Renamed to ...
        (do_section_details): This.
        (option): Rename "-N/--full-section-name" to
        "-t/--section-details".
        (usage): Likewise.
        (parse_args): Likewise.
        (get_elf_section_flags): Support do_section_details.
        (process_section_headers): Updated for do_section_details.

2005-08-04  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        * readelf.c (get_parisc_dynamic_type): Add new dynamic types.
        (get_dynamic_type): Use old values for DT_LOOS and DT_HIOS when
        e_machine is EM_PARISC.
        (get_parisc_segment_type): Add new segment types.
        (get_parisc_section_type_name): Add new section names.
        (dynamic_section_parisc_val): Add new table entries.

2005-08-01  Filip Navara  <navaraf@reactos.com>

        * dlltool.c (alphafunc): Remove and replace usage with nfunc.
        (nfunc): Fix sorting of fastcall symbols when --kill-at is used.

2005-07-25  H.J. Lu  <hongjiu.lu@intel.com>

        * readelf.c (dump_relocations): Handle SHN_X86_64_LCOMMON.
        (get_symbol_index_type): Likewise.
        (get_elf_section_flags): Handle SHF_X86_64_LARGE.

2005-07-21  Eric Christopher  <echristo@apple.com>

        * MAINTAINERS: Change affiliation.

2005-07-19  Ben Elliston  <bje@au.ibm.com>

        * readelf.c (read_and_display_attr_value): Remove comment adjacent
        to DW_ATE_decimal_float about it being a GNU extension.

2005-07-18  Nick Clifton  <nickc@redhat.com>

        * binemul.c: Fix name of Red Hat.
        * binemul.h: Likewise.
        * emul_aix.c: Likewise.
        * emul_vanilla: Likewise.

2005-07-18  Ben Elliston  <bje@au.ibm.com>

        * readelf.c (read_and_display_attr_value): Handle a DW_AT_encoding
        value of DW_ATE_decimal_float instead of DW_ATE_GNU_decimal_float.

2005-07-16  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am: Run "make dep-am".
        * Makefile.in: Regenerate.

2005-07-15  Eric Christopher  <echristo@redhat.com>

        * MAINTAINERS: Change affiliation.

2005-07-14  Jim Blandy  <jimb@redhat.com>

        * readelf.c: #include "elf/m32c.h"
        (guess_is_rela, dump_relocations, get_machine_name): Add cases for
        EM_M32C.
        * Makefile.am (readelf.o): Update dependencies.
        * Makefile.in: Regenerated.

2005-07-08  Ben Elliston  <bje@au.ibm.com>

        * bucomm.h: Include <stdarg.h> unconditionally, not only when
        ANSI_PROTOTYPES is defined.  Remove #ifdef logic.
        * dlltool.c: Likewise.
        * dllwrap.c: Likewise.

2005-07-07  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

        * bucomm.h (report): Add format attribute.
        * dlltool.c (inform): Likewise.
        * dllwrap.c (display, inform, warn): Likewise.
        * objdump.c (objdump_sprintf): Likewise.
        * readelf.c (error, warn): Likewise.  Fix format bugs.

2005-07-05  Dmitry V. Levin  <ldv@altlinux.org>
            Nick Clifton  <nickc@redhat.com>

        * strings.c (filename_and_size_t): New typedef.
        (strings_a_section): Skip sections with size greater or equal to
        the file size.  Cache the file size to avoid repeated stat()s.
        (strings_object_file): Pass filename_and_size_t argument to
        strings_a_section() via bfd_map_over_sections().

2005-07-04  Alan Modra  <amodra@bigpond.net.au>

        PR 1004
        * objcopy.c (copy_object): Use bfd_make_section_with_flags.
        (write_debugging_info): Likewise.
        (setup_section): Use bfd_make_section_anyway_with_flags.

2005-07-01  Steve Ellcey  <sje@cup.hp.com>

        * configure.in (AM_BINUTILS_WARNINGS): Add.
        (BFD_NEED_DECLARATION): Replace with AC_CHECK_DECLS.
        * configure: Regenerate.
        * config.in: Regenerate.
        * objdump.c (NEED_DECLARATION_*): Replace with !HAVE_DECL_*.
        * bucomm.h: (NEED_DECLARATION_*): Ditto.

2005-06-30  Ben Elliston  <bje@gnu.org>

        * Makefile.am (check-DEJAGNU): Don't search for expect.
        * Makefile.in: Regenerate.

2005-06-30  Ben Elliston  <bje@gnu.org>

        * Makefile.am (EXPECT): Set to expect.
        (RUNTEST): Likewise, set to runtest.
        * Makefile.in: Regenerate.

2005-06-17  Jakub Jelinek  <jakub@redhat.com>

        * readelf.c (CHECK_ENTSIZE_VALUES, CHECK_ENTSIZE): Define.
        (process_section_headers): Use it.
        (process_relocs): Don't crash if symsec is not SHT_SYMTAB
        or SHT_DYNSYM.
        (process_version_sections): Use sizeof (Elf_External_Versym)
        instead of sh_entsize.

2005-06-16  Nick Clifton  <nickc@redhat.com>

        * rename.c (simple_copy): Only define if it is going to be used.
        (smart_rename): Mark the preserve_dates parameter as possibly
        being unused.

        * resres.c (write_res_data): Prevent a potential compile time
        warning by casting the return value from fwrite.

2005-06-14  H.J. Lu  <hongjiu.lu@intel.com>

        PR 995
        * ar.c (BUFSIZE): Moved to ...
        * bucomm.h (BUFSIZE): Here.

        * bucomm.c: Include <assert.h>.
        (bfd_get_archive_filename): New.
        * bucomm.h (bfd_get_archive_filename): New.

        * objcopy.c (copy_unknown_object): New.
        (copy_object): Use bfd_get_archive_filename when reporting input
        error. Don't call fatal on unknown arch.
        (copy_archive): Call copy_unknown_object on unknown format or
        arch.

2005-06-14  Jakub Jelinek  <jakub@redhat.com>

        * readelf.c (cmalloc, xcmalloc, xcrealloc): New functions.
        (get_data): Add nmemb argument.  Return NULL if nmemb * size
        overflows.  If var == NULL, allocate one extra byte and
        clear it.
        (slurp_rela_relocs, slurp_rel_relocs, get_32bit_program_headers,
        get_64bit_program_headers, get_program_headers,
        get_32bit_section_headers, get_64bit_section_headers,
        get_32bit_elf_symbols, get_64bit_elf_symbols, process_section_headers,
        process_section_groups, process_relocs, slurp_ia64_unwind_table,
        ia64_process_unwind, slurp_hppa_unwind_table, hppa_process_unwind,
        get_32bit_dynamic_section, get_64bit_dynamic_section,
        process_dynamic_section, process_version_sections, get_dynamic_data,
        process_symbol_table, dump_section, load_debug_str, load_debug_loc,
        load_debug_range, read_and_display_attr_value, process_debug_info,
        get_debug_info, frame_need_space, display_debug_frames,
        display_debug_section, process_mips_specific, process_gnu_liblist,
        process_corefile_note_segment): Adjust get_data callers.  Use
        cmalloc, xcmalloc and xcrealloc instead of {m,xm,xre}alloc where
        passed size is a product of 2 numbers.

        * readelf.c (print_mode): Fix comment typo.
        (slurp_rela_relocs, slurp_rel_relocs): Fix memory leaks.
        (dump_relocations): Fix a thinko in check for invalid st_name.
        (process_program_headers): Don't crash if string_table is NULL.
        (process_section_headers): Don't crash if e_shstrndx is invalid.
        Ensure string_table_length is 0 if string_table == NULL.
        Don't return just because string_table is NULL.
        (process_section_groups): Don't crash if symtab's sh_link or
        symbol's st_name is invalid.  Fix a memory leak.  Fix check for
        invalid section number entry.
        (process_relocs): Don't crash if relocation or symbol section's
        sh_link is invalid.
        (slurp_ia64_unwind_table, slurp_hppa_unwind_table): Don't crash if
        relocation section's sh_info is invalid.
        (ia64_process_unwind, hppa_process_unwind): Don't crash if symbol
        table's sh_link is invalid.
        (process_version_sections): Don't crash on version or symbol
        section's sh_link is invalid.  Don't crash if symbol's st_shndx
        is invalid.
        (process_symbol_table): Don't crash if string table is corrupt
        or symbol's st_name, st_shndx, vna_name or vda_name is invalid.
        (debug_apply_rela_addends): Don't crash if relocation section's
        sh_info or sh_link is invalid.
        (display_debug_loc): Warn for unterminated .debug_loc section
        or start offsets not within .debug_loc section boundaries.
        (process_gnu_liblist): Don't crash if liblist section's sh_link
        or entry's l_name is invalid.

2005-06-09  Jakub Jelinek  <jakub@redhat.com>

        * objdump.c (disassemble_bytes): Don't crash if q->howto == NULL.
        If q->howto->name == NULL, print q->howto->type as number instead.
        (dump_reloc_set): Likewise.

2005-06-07  Eric Christopher  <echristo@redhat.com>

        * readelf.c (guess_is_rela): Support ms1.
        (dump_relocations): Ditto.
        (get_machine_name): Ditto.

2005-06-07  Aldy Hernandez  <aldyh@redhat.com>
            Michael Snyder  <msnyder@redhat.com>
            Stan Cox  <scox@redhat.com>

        * Makefile.am (readelf.o): Depend on ms1.h.

        * Makefile.in: Regenerate.

        * readelf.c: Include ms1.h.

2005-06-06  H.J. Lu  <hongjiu.lu@intel.com>

        PR 990
        * nm.c (print_symbol): Call bfd_find_line before
        bfd_find_nearest_line.

2005-06-06  Alan Modra  <amodra@bigpond.net.au>

        * NEWS: Mention new powerpc ld support.

2005-06-03  Steve Ellcey  <sje@cup.hp.com>

        * configure.in: Check for getc_unlocked prototype.
        * configure: Regenerate.
        * config.in: Regenerate.
        * strings.c (get_char): Only call getc_unlocked if we have seen a
        prototype.

2005-06-03  Nick Clifton  <nickc@redhat.com>

        * configure.in (ALL_LINGUAS): Add zh_TW
        * configure: Regenerate.
        * po/zh_TW.po: New Chinese (traditional) translation.

2005-05-31  Richard Henderson  <rth@redhat.com>

        * readelf.c (dump_relocations): Special case R_ALPHA_LITUSE.

2005-05-29  Richard Henderson  <rth@redhat.com>

        * readelf.c (get_alpha_dynamic_type): New.
        (get_dynamic_type): Call it.

2005-05-24  H.J. Lu  <hongjiu.lu@intel.com>

        * readelf.c (process_section_groups): Report group section
        index. Check if the section member index is valid.

2005-05-23  Fred Fish  <fnf@specifixinc.com>

        * addr2line.c (unwind_inlines): New flag for 'i' option.
        (usage): Document '-i' option.
        (long_options): Recognize '--inlines'.
        (translate_addresses): Loop, calling bfd_find_inliner_info as
        necessary and printing multiple output lines.
        (main): Handle 'i' option.
        * doc/binutils.texi (addr2line): Document '-i' option.
        * NEWS: Mention new addr2line '-i' option.

2005-05-23  Nick Clifton  <nickc@redhat.com>

        * readelf.c (fetch_indirect_string): Display a warning message
        when a corrupt DW_FORM_strp value is encountered.

        (process_debug_info): Mention that the compilation unit offset is
        being displayed in hexadecimal.

        (display_debug_lines): Fix typo in name of .debug_line section.

2005-05-19  Zack Weinberg  <zack@codesourcery.com>

        * Makefile.am: Have 'all' depend on 'info'.
        * Makefile.in: Regenerate.

2005-05-19  Ben Elliston  <bje@au.ibm.com>

        * readelf.c (read_and_display_attr_value): Handle a DW_AT_encoding
        value of DW_ATE_GNU_decimal_float.

2005-05-17  Daniel Jacobowitz  <dan@codesourcery.com>

        * doc/Makefile.am (config.texi): Don't use $<.
        * doc/Makefile.in: Regenerated.

2005-05-15  Yitzchak Scott-Thoennes  <sthoenna@efn.org>

        * deflex.l: Ignore CRs

2005-05-15  Daniel Jacobowitz  <dan@codesourcery.com>

        * acinclude.m4: Remove obsolete code.
        * configure.in: Update AC_PREREQ.
        * doc/Makefile.am (binutils_TEXINFOS): Define.
        (config.texi): Depend on distributed files instead of built
        files.
        (binutils.dvi, binutils.info): Remove unnecessary rules.
        (DISTCLEANFILES): Remove.
        (install-data-local): Renamed from install.
        (info-local): Renamed from info.
        * Makefile.in, aclocal.m4, config.in, configure,
        doc/Makefile.in: Regenerated.

2005-05-14  Alan Modra  <amodra@bigpond.net.au>

        * readelf.c (get_ppc_dynamic_type): Display DT_PPC_GOT, not
        DT_PPC_GLINK.

2005-05-13  Fred Fish  <fnf@specifixinc.com>

        * readelf.c: Fix a couple of obvious comment typos,
        'debug_str' -> 'debug_ranges' and proecess' -> 'process'.

2005-05-13  H.J. Lu  <hongjiu.lu@intel.com>

        * readelf.c (dump_ia64_unwind): Get stamp with proper size.

2005-05-12  Nick Clifton  <nickc@redhat.com>

        * readelf.c (display_debug_lines): If pointer_size has not been
        found then assume that it is 4 in order to prevent a seg fault
        when process_extend_line_op attempts to read the line data.

2005-05-11  Alan Modra  <amodra@bigpond.net.au>

        * readelf.c (get_ppc_dynamic_type): New function for DT_PPC_GLINK.
        (get_dynamic_type): Call the above.

2005-05-07  Nick Clifton  <nickc@redhat.com>

        * Update the address and phone number of the FSF organization in
        the GPL notices in the following files:
        aclocal.m4, addr2line.c, ar.c, arlex.l, arparse.y, arsup.c,
        arsup.h, binemul.c, binemul.h, bucomm.c, bucomm.h, budbg.h,
        budemang.c, budemang.h, coffdump.c, coffgrok.c, coffgrok.h,
        cxxfilt.c, debug.c, debug.h, deflex.l, defparse.y, dlltool.c,
        dlltool.h, dllwrap.c, emul_aix.c, emul_vanilla.c, filemode.c,
        ieee.c, nlmconv.c, nlmconv.h, nlmheader.y, nm.c, objcopy.c,
        objdump.c, prdbg.c, rclex.l, rcparse.y, rdcoff.c, rddbg.c,
        readelf.c, rename.c, resbin.c, rescoff.c, resrc.c, resres.c,
        size.c, srconv.c, stabs.c, strings.c, sysdump.c, sysinfo.y,
        syslex.l, unwind-ia64.c, unwind-ia64.h, version.c, windres.c,
        windres.h, winduni.c, winduni.h wrstabs.c, doc/fdl.texi

2005-05-06  Jan Beulich  <jbeulich@novell.com>

        * objcopy.c (copy_file): Don't delete output upon error here.
        (copy_main): Delete output upon error.

2005-05-02  Ben Elliston  <bje@au.ibm.com>

        * dlltool.c (dtab): Remove empty function.
        (process_duplicates): Remove calls to dtab().

2005-05-01  Maciej W. Rozycki  <macro@linux-mips.org>

        * doc/binutils.texi (strip, objcopy): Clarify the description of
        the "--strip-debug" option.  Fix a typo.

2005-04-29  H.J. Lu  <hongjiu.lu@intel.com>

        * bucomm.c: Undo the last change.
        * bucomm.h: Likewise.

2005-04-29  Ben Elliston  <bje@au.ibm.com>

        * syslex.l (word, number, unit): Remove unused variables.
        * nlmheader.y (keyword_tokens): Make static.
        * coffdump.c (dump_coff_symbol, coff_dump): Make static.
        * coffgrok.c (lofile, last_function_symbol, last_function_type,
        last_struct, last_enum, cur_sfile): Make variables static.
        * sysdump.c (getCHARS, fillup, getBARRAY, getINT, getBITS,
        sysroff_swap_tr_in, sysroff_print_tr_out): Make static.
        * sysinfo.y (writecode, it, code, repeat, oldrepeat, name, rdepth,
        names, pnames): Likewise.

2005-04-29  Ben Elliston  <bje@au.ibm.com>

        * ar.c (mri_mode): Make static.
        * arsup.c (obfd, real_name, outfile): Likewise.
        * binemul.c (ar_emul_create): Remove unused function.
        (ar_emul_default_create): Likewise.
        * binemul.h (ar_emul_create): Remove declaration.
        (ar_emul_default_create): Likewise.
        (struct bin_emulation_xfer_struct): Remove ar_create member.
        * bucomm.c (report): Make static.
        * bucomm.h (report): Remove declaration.
        * cxxfilt.c (mbuffer): Make static.
        (main): Use unsigned ints for some loop control variables.
        * readelf.c: Make many global variables static.
        * size.c (berkeley_format): Make static.
        (long_options): Likewise.
        * emul_aix.c (bin_aix_emulation): Remove ar_emul_default_create
        structure initialiser.
        (bin_aix5_emulation): Likewise.
        * emul_vanilla.c (bin_vanilla_emulation): Likewise.

2005-04-27  Ben Elliston  <bje@au.ibm.com>

        * syslex.l: Adjust top-of-file comment: this file is part of GNU
        binutils, not GNU ld.

2005-04-25  Nick Clifton  <nickc@redhat.com>

        PR872
        * objcopy.c (copy_archive): Initialise 'obfd' field of new
        name_list structure.

        * objcopy.c (copy_usage): Fix description of -K switch.

        * doc/binutils.texi (strip, objcopy): Fix description of -K
        switch.

2005-04-20  Daniel Jacobowitz  <dan@codesourcery.com>

        * readelf.c (display_debug_frames): Use data factor for
        DW_CFA_def_cfa_sf and DW_CFA_def_cfa_offset_sf.

2005-04-19  H.J. Lu  <hongjiu.lu@intel.com>

        * objdump.c (dump_section_header): Skip linker created section.

2005-04-17  H.J. Lu  <hongjiu.lu@intel.com>

        * objdump.c (dump_section_header): Support SEC_GROUP.

2005-04-16  Nick Clifton  <nickc@redhat.com>

        * readelf.c (debug_apply_rela_addends): Remove redundant %s from
        printf string.

2005-04-15  Nick Clifton  <nickc@redhat.com>

        * objcopy.c (copy_file): Issue an error message when attmepting to
        copy an empty input file.

2005-04-14  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am (NO_WERROR): Define.  Use instead of -Wno-error.
        * configure.in: Include ../bfd/warning.m4 contents.
        * Makefile.in: Regenerate.
        * configure: Regenerate.
        * doc/Makefile.in: Regenerate.

2005-04-12  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am: Run "make dep-am".
        (syslex.o, sysinfo.o, arparse.o, arlex.o): Add -Wno-error to command.
        (sysroff.o, defparse.o, deflex.o): Likewise.
        (nlmheader.o, rcparse.o, rclex.o): Likewise.
        * Makefile.in: Regenerate.
        * aclocal.m4: Regenerate.
        * config.in: Regenerate.
        * configure: Regenerate.

2005-04-11  Jan Beulich  <jbeulich@novell.com>

        * MAINTAINERS: Add myself as ix86 Intel mode maintainer.

2005-04-06  Nick Clifton  <nickc@redhat.com>
            H.J. Lu  <hongjiu.lu@intel.com>

        * po/rw.po: New translation: Kinyarwanda.
        * configure.in (ALL_LINGUAS): Add rw.
        * configure: Regenerate.

2005-04-04  Maciej W. Rozycki  <macro@linux-mips.org>

        * readelf.c (debug_apply_rela_addends): Reorder r_info as
        necessary for 64-bit MIPS.

2005-04-04  Maciej W. Rozycki  <macro@linux-mips.org>

        * doc/binutils.texi (readelf): Remove a duplicate paragraph.

2005-04-04  Ramana Radhakrishnan  <ramana.radhakrishnan@codito.com>

        PR binutils/813
        * objdump.c (dump_symbols): Add a check to see if the section for
        the symbol is chosen using process_section_p.

2005-04-01  H.J. Lu  <hongjiu.lu@intel.com>

        * NEWS: Mention new readelf options, "-N/--full-section-name"
        and "-g/--section-groups".

        * doc/binutils.texi: Document new readelf options,
        "-N/--full-section-name" and "-g/--section-groups".

2005-03-31  H.J. Lu  <hongjiu.lu@intel.com>

        * readelf.c (do_full_section_name): New.
        (options): Add "--full-section-name"/'N'.
        (usage): Add -N/--full-section-name.
        (parse_args): Handle 'N'.
        (process_section_headers): Print out the full section name if
        do_full_section_name isn't 0.

2005-03-31  Nick Clifton  <nickc@redhat.com>

        * configure.in: Add a check for <unistd.h> providing a prototype
        for getopt() which is compatible with the one in
        include/getopt.h.  If so then define HAVE_DECL_GETOPT.
        * configure: Regenerate.
        * config.in (HAVE_DECL_GETOPT): Add.
        * aclocal.m4: Regenerate.
        * addr2line.c: Include "config.h" before "bfd.h" so that
        HAVE_DECL_GETOPT is defined before getopt.h is included.

2005-03-21  Jan-Benedict Glaw  <jbglaw@lug-owl.de>

        * doc/binutils.texi: Document new VAX disassembler-specific option
        -M entry:0xfooba8.
        * NEWS: Mention the new option.

2005-03-29  Anil Paranjpe  <anilp1@kpitcummins.com>

        * MAINTAINERS: Add myself as H8300 maintainer.

2005-03-28  Aaron W. LaFramboise  <aaron98wiridge9@aaronwl.com>

        * objdump.c (disassemble_bytes): Remove cast.

2005-03-25  Daniel Jacobowitz  <dan@codesourcery.com>

        * BRANCHES: Add binutils-csl-arm-2005q1-branch and
        binutils-2_16-branch.

2005-03-25  Mark Kettenis  <kettenis@gnu.org>

        * MAINTAINERS: Add myself as M88k maintainer.

2005-03-24  Danny Smith  <dannysmith@users.sourceforge.net>

        * winduni.c (unicode_from_ascii): Don't declare variables
        's' and 'w' if _WIN32.  Use MultiByteToWideChar to set the unicode
        string len.

2005-03-24  Dmitry Diky   <diwil@spec.ru>

        * MAINTAINERS: Add myself as MSP430 maintainer.

2005-03-23  Nick Clifton  <nickc@redhat.com>

        * po/fr.po: Updated translation.

2005-03-22  Nick Clifton  <nickc@redhat.com>

        * MAINTAINERS: Add Daniel Jacobwitz to the blanket write
        privileges list.

2005-03-17  Paul Brook <paul@codesourcery.com>
            Dan Jacobowitz <dan@codesourcery.com>
            Mark Mitchell  <mark@codesourcery.com>

        * binutils/readelf.c (get_arm_segment_type): New function.
        (get_segment_type): Use it.

2005-03-18  Paul Brook  <paul@codesourcery.com>

        * objdump.c (objdump_print_addr): Avoid uninitialized warning.

2005-03-17  Diego Novillo  <dnovillo@redhat.com>

        * MAINTAINERS: Remove self as maintainer of x86 intel
        mode.

2005-03-16  Nick Clifton  <nickc@redhat.com>
            Ben Elliston  <bje@au.ibm.com>

        * configure.in (werror): New switch: Add -Werror to the
        compiler command line.  Enabled by default.  Disable via
        --disable-werror.
        * configure: Regenerate.

2005-03-15  Daniel Marques  <marques@cs.cornell.edu>
            Nick Clifton  <nickc@redhat.com>

        * objcopy.c (globalize_specific_list): New linked list of symbols
        to convert from local binding into global binding.
        (command_line_switch): Add OPTION_GLOBALIZE_SYMBOL and
        OPTION_GLOBALIZE_SYMBOLS.
        (copy_options): Add "globalize-symbol" and "globalize-symbols".
        (copy_usage): Document the new switches.
        (filter_symbols): Convert defined local symbols mentioned on the
        globalize_specific_list into global symbols.
        (copy_object): Perform actions if the globalize_specific_list is
        not empty.
        (copy_main): Handle new switches.
        * NEWS: Mention new feature.
        * doc/binutils.texi: Document new switches.

2005-03-15  Alan Modra  <amodra@bigpond.net.au>

        * po/es.po: Commit new Spanish translation.

        * po/fr.po: Commit new French translation.

2005-03-14  Alan Modra  <amodra@bigpond.net.au>

        * po/tr.po: Commit new Turkish translation.

2005-03-11  Nick Clifton  <nickc@redhat.com>

        * po/fr.po: Updated French translation.

2005-03-10  Nick Clifton  <nickc@redhat.com>

        * configure.in (ALL_LINGUAS): Add Romanian lingua "ro".
        * configure: Regenerate.
        * po/ro.po: New file.

        * po/ru.po: Updated file.

2005-03-05  Alan Modra  <amodra@bigpond.net.au>

        * po/binutils.pot: Regenerate.

2005-03-02  Jan Beulich  <jbeulich@novell.com>

        * ar.c (remove_output): Use unlink_if_ordinary instead of unlink.
        * objcopy.c (copy_file): Likewise.
        (strip_main): Likewise.

2005-03-01  Stig Petter Olsroed  <stigpo@users.sourceforge.net>
            Nick Clifton  <nickc@redhat.com>

        * objdump.c: Fix coding for DISASSEMBLER_NEEDS_RELOC:
        (struct objdump_disasm_info): Add 'reloc' field.
        (disassemble_bytes): Fix check for when an insn has a reloc
        associated with it.  Improve comment explaining why the use of
        octets is wrong.  Set the 'reloc' field in objdump_disasm_info
        structure.
        (objdump_print_addr): Use new 'reloc' field to lookup the correct
        address for the symbol associated with the current instruction's
        relocation.
        (disassemble_info): Initialise 'reloc' field.

2005-02-28  Jakub Jelinek  <jakub@redhat.com>

        * readelf.c (get_file_type, get_machine_name, get_osabi_name,
        get_segment_type, get_section_type_name, get_elf_class,
        get_data_encoding, get_group_flags, dynamic_section_mips_val,
        get_symbol_binding, get_symbol_type, get_TAG_name, get_FORM_name,
        get_AT_name, process_mips_specific, process_gnu_liblist,
        get_note_type, get_netbsd_elfcore_note_type): Use snprintf instead of
        sprintf where needed.
        (get_dynamic_type): Likewise.  Increase buff to 64 bytes.
        (get_elf_section_flags): Increase buff to 33 bytes.  Avoid
        using strcat.
        (get_dynamic_flags): Renamed to...
        (print_dynamic_flags): ... this.  Print the flags to stdout instead
        of returning them as string.
        (process_dynamic_section): Adjust caller.

2005-02-25  H.J. Lu  <hongjiu.lu@intel.com>

        * readelf.c (display_debug_ranges): Print out offset for end of
        list.

2005-02-23  Alan Modra  <amodra@bigpond.net.au>

        * dlltool.c: Warning fixes.
        * objdump.c: Likewise.

2005-02-22  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am (syslex.o, sysinfo.o): Pass AM_CFLAGS to compiler.
        (syslex.o, sysinfo.o, dlltool.o, rescoff.o): Remove duplicate
        dependencies.  Run "make dep-am".
        * nlmconv.c: Warning fixes.
        * readelf.c: Likewise.
        * srconv.c: Likewise.
        * sysdump.c: Likewise.
        * sysinfo.y: Likewise.
        * syslex.l: Likewise.  Use yyleng instead of strlen, memcpy instead
        of strcpy.
        * Makefile.in: Regenerate.

2005-02-21  H.J. Lu  <hongjiu.lu@intel.com>

        * objcopy.c (parse_flags): Replace SEC_SHARED with
        SEC_COFF_SHARED.

        * objdump.c (dump_section_header): Dump SEC_TIC54X_BLOCK and
        SEC_TIC54X_CLINK for TI c54x only. Remove SEC_ARCH_BIT_0. Dump
        SEC_COFF_SHARED for COFF only.

2005-02-21  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am: Run "make dep-am"
        * Makefile.in: Regenerate.
        * doc/Makefile.in: Regenerate.

2005-02-21  Alan Modra  <amodra@bigpond.net.au>

        * readelf.c (BYTE_GET8): Delete.  Replace uses with BYTE_GET.
        (byte_get_little_endian): Don't handle size of -8.
        (byte_get_signed, byte_get_big_endian): Likewise.
        (print_dec_vma, print_hex_vma): New functions.
        (print_vma): Use them.  Return chars output.
        (get_dynamic_data): Return a bfd_vma array.  Add ent_size parm.
        (process_symbol_table): Handle alpha and s390 .hash.

2005-02-18  H.J. Lu  <hongjiu.lu@intel.com>

        * readelf.c (display_debug_loc): Print out offset for end of
        list.

2005-02-18  Joseph S. Myers  <joseph@codesourcery.com>

        * Makefile.am (TOOL_PROGS): Add objdump.
        * Makefile.in: Regenerate.

2005-02-17  Alan Modra  <amodra@bigpond.net.au>

        * deflex.l (YY_NO_UNPUT): Define.
        * rclex.l (YY_NO_UNPUT): Define.
        * rcparse.y (null_unichar): New static var.
        (res_null_text): Use it rather than attempting to init from wchar_t.
        * windres.c: Include assert.h and time.h before getopt.h.
        Include config.h and unistd.h too.

2005-02-15  Nick Clifton  <nickc@redhat.com>

        * nlmconv.c: Provide a full prototype for the localtime() function
        in order to avoid a compile time warning.

2005-02-11  H.J. Lu  <hongjiu.lu@intel.com>

        * readelf.c (group_count): Don't initialize it.
        (process_section_groups): Reurn 1 if we won't do unwind nor
        section groups. Set group_count to 0 before counting group
        sections and return 1 if there are no group sections. Reread
        SHT_SYMTAB/SHT_STRTAB sections only when needed. Don't skip
        section 0.
        (process_object): Only set do_unwind to 0 if
        process_section_groups return 0.

2005-02-10  Ian Lance Taylor  <ian@airs.com>

        * MAINTAINERS: Update my e-mail address.

2005-02-10  Mark Mitchell  <mark@codesourcery.com>

        * MAINTAINERS: Add Paul Brook and Mark Mitchell as ARM (Symbian)
        maintainers.

2005-02-07  Inderpreet Singh <inderpreetb@noida.hcltech.com>

         * MAINTAINERS: Add self as maintainer of MAXQ.

2005-01-31  Richard Sandiford  <rsandifo@redhat.com>

        * readelf.c (eh_addr_size): New variable.
        (find_section): Move earlier in file.  Return empty sections too.
        (process_program_headers): Use find_section to find .dynamic.
        (process_section_headers): Initialize eh_addr_size.
        (dump_ia64_unwind, slurp_ia64_unwind_table, ia64_process_unwind)
        (dump_hppa_unwind, slurp_hppa_unwind_table, hppa_process_unwind)
        (display_debug_frames): Use it instead of local addr_size variable.
        (size_of_encoded_value): Get pointer size from eh_addr_size rather
        than is_32bit_elf.

2005-01-31  Andrew Cagney  <cagney@gnu.org>

        * configure: Regenerate to track ../gettext.m4.

2005-01-31  Nick Clifton  <nickc@redhat.com>

        * version.c (print_version): Bump the copyright date to 2005.

2005-01-25  Alan Modra  <amodra@bigpond.net.au>

        * nm.c (display_rel_file): Read dynamic syms before calling
        bfd_get_synthetic_symtab.

2005-01-21  Ben Elliston  <bje@au.ibm.com>

        * dlltool.c (dump_iat): Remove unused function.
        (gen_exp_file): Remove #if 0'd code.
        (make_one_lib_file): Likewise.
        * srconv.c: Remove #if 0'd code throughout.
        * size.c (lprint_number): Remove.
        (print_berkeley_format): Remove #if 0'd code.
        * ar.c (do_quick_append): Remove declaration and definiton.
        (main): Remove #if 0'd code.
        * filemode.c (filemodestring): Remove #if 0'd function.
        * sysdump.c (unit_info_list): Remove function.
        (object_body_list): Likewise.
        (program_structure): Likewise.
        (debug_list): Likewise.
        (module): Remove #if 0'd code.

2005-01-20  Mark Mitchell  <mark@codesourcery.com>

        * BRANCHES: Add binutils-2_15-branch.

        * MAINTAINERS: Document branch policy.
        * BRANCHES: New file.

2005-01-19  Fred Fish  <fnf@specifixinc.com>

        * NEWS: Make note of the new MIPS disassembly option "no-aliases".
        * doc/binutils.texi (objdump): Document the "no-aliases"
        disassembly option.

2005-01-17   Eugene Kotlyarov  <ekot@narod.ru>

        PR binutils/647
        * rcparse.y (RCDATA): Allow a filename to be supplied as the
        parameter.  Parse it with define_rcdata_file().
        * resrc.c (define_rcdata_file): New function.
        * windres.h: Provide a prototype for the new function.

        * resrc.c (define_user_file): Fix typo by replacing "font file"
        with "file".

2005-01-16  Jason Thorpe  <thorpej@netbsd.org>

        * MAINTAINERS: Update my email address.

2005-01-16  Danny Smith  <dannysmith@users.sourceforge.net>

        * dlltool.c (set_dll_name_from_def): New function.  Strip name
        to basename, with warning.
        (def_name): Use it.
        (def_library): Likwise.
        (main): Strip arg of --dllname to basename, with warning.
        Only use basename of exp_name when inferring dll_name.

2005-01-11  Nick Clifton  <nickc@redhat.com>

        PR binutils/637
        * doc/binutils.texi (c++filt): Use uppercase CXXFILT in the
        footnote in order to prevent the sed script in the Makefile from
        converting it into c++filt.

2005-01-10  H.J. Lu  <hongjiu.lu@intel.com>

        BZ 635
        readelf.c (saved_base_address): Removed.
        (decode_64bit_range): Likewise.
        (decode_range): Likewise.
        (display_64bit_debug_ranges): Likewise.
        (debug_info): Add range_lists, num_range_lists and
        max_range_lists.
        (read_and_display_attr_value): Handle do_debug_ranges.
        (process_debug_info): Likewise.
        (display_debug_ranges): Rewrite.
        (process_object): Free range_lists.

2005-01-10  Andreas Schwab  <schwab@suse.de>

        * configure.in: Don't define SKIP_ZEROES.
        * configure: Regenerate.
        * objdump.c (disassemble_data): Set skip_zeroes and
        skip_zeroes_at_end in disasm_info to defaults.
        (DEFAULT_SKIP_ZEROES): Rename from SKIP_ZEROES and always define.
        (DEFAULT_SKIP_ZEROES_AT_END): Rename from SKIP_ZEROES_AT_END and
        always define.
        (disassemble_bytes): Use skip_zeroes and skip_zeroes_at_end from
        objdump_disasm_info.

2005-01-05  H.J. Lu  <hongjiu.lu@intel.com>

        * readelf.c (display_debug_loc): Display base address
        specifiers.  Always output <End of list>.

2005-01-05  H.J. Lu  <hongjiu.lu@intel.com>

        * readelf.c (have_frame_base): New.
        (need_base_address): Likewise.
        (saved_base_address): Likewise.
        (decode_location_expression): Return 1 if DW_AT_frame_base is
        needed.
        (debug_info): Add base_address and a have_frame_base pointer.
        (read_and_display_attr_value): Replace saved_DW_AT_low_pc with
        saved_base_address. Record base address. Set have_frame_base.
        Record if a location list has DW_AT_frame_base. Display if a
        location expression has no DW_AT_frame_base but needs one. Set
        saved_base_address only if needed.
        (process_debug_info): Clear have_frame_base, saved_base_address
        and set need_base_address.
        (display_debug_loc): Display if a location expression has no
        DW_AT_frame_base but needs one. Display if start >= end. Don't
        adjust for section address. Properly handle base address.
        (process_object): Free the have_frame_base pointer in
        debug_info.

2005-01-04  H.J. Lu  <hongjiu.lu@intel.com>

        * readelf.c (display_debug_loc): Display offsets for hole and
        overlap.
        (display_debug_str): Add a newline at the end.

2005-01-04  Armin Diehl  <diehl@nordrhein.de>

        PR binutils/630
        * nlmconv.c (main): Only store the basename of the output filename
        in the module table.

2005-01-04  H.J. Lu  <hongjiu.lu@intel.com>

        BZ 615
        * readelf.c (process_debug_info): New.
        (debug_info): Add num_loc_offsets, loc_offsets and
        last_loc_offset_p.
        (get_debug_info): Use process_debug_info.
        (display_debug_loc): Properly handle location list. Warn if bad
        location lists are encoutnered.
        (read_and_process_attr_value): New.
        (read_and_display_attr_value): Use "%lx" for DW_FORM_data4.
        (display_debug_info): Use process_debug_info.
        (process_object): Also free loc_offsets in debug_information.

2004-12-31  Alan Modra  <amodra@bigpond.net.au>

        * objdump.c (remove_useless_symbols): Discard section symbols.

2004-12-27  H.J. Lu  <hongjiu.lu@intel.com>

        * readelf.c (read_leb128): Support 64bit host.

2004-12-23  Nick Clifton  <nickc@redhat.com>

        PR binutils/616
        * readelf.c (debug_info): Add 'cu_offset' field.
        (get+pointer_size_of_comp_unit): Rename to
        'get_pointer_size_and_offset_of_comp_unit'.  Add code to return
        the offset of the comp_unit if requested.
        (get_debug_info): Record comp_unit offsets as well.
        (display_debug_lines): Call get_pointer_size_of_comp_unit.
        (decode_location_expression): Add an extra parameter - the offset
        of the current comp-unit.  Use this when decoding the DW_OP_call2
        and DW_OP_call4 operators.
        (display_debug_loc): Call get_pointer_size_of_comp_unit, pass the
        comp_unit offset on the decode_location_expression.
        (read_and_display_attr_value): Pass the comp_unit offset on the
        decode_location_expression.
        (display_debug_frames): Pass 0 as the comp_unit offset to
        decode_location_expression.

2004-12-22  Nick Clifton  <nickc@redhat.com>

        * readelf.c (last_pointer_size, warned_about_missing_comp_units):
        New variables associated with obtaining the pointer size for a
        comp_unit.
        (get_pointer_size_of_comp_unit): Add an extra parameter - the name
        of the section requesting the pointer size.  Use this name in
        error messages.  If there are not enough comp_units available
        produce a warning message, but return the last known pointer size
        so that section dumping can continue.
        (get_debug_info): Reset the new variables.
        (display_debug_lines): Add extra parameter to invocation of
        get_pointer_size_of_comp_unit and remove error message when it
        returns 0.
        (display_debug_loc): Likewise.

2004-12-15 Jan Beulich  <jbeulich@novell.com>

        * doc/binutils.texi: Document --strip-unneeded-symbol and
        --strip-unneeded-symbols.
        * objcopy.c (strip_unneeded_list): New.
        (enum command_line_switch): Add OPTION_STRIP_UNNEEDED_SYMBOL
        and OPTION_STRIP_UNNEEDED_SYMBOLS.
        (copy_options): Add  --strip-unneeded-symbol and
        --strip-unneeded-symbols.
        (copy_usage): Likewise.
        (filter_symbols): Suppress copying of symbol if in strip_unneeded_list
        and the symbol is not needed.
        (copy_main): Handle OPTION_STRIP_UNNEEDED_SYMBOL and
        OPTION_STRIP_UNNEEDED_SYMBOLS.

2004-12-09  Ian Lance Taylor  <ian@wasabisystems.com>

        * readelf.c (get_machine_flags): Handle E_MIPS_MACH_9000.

2004-12-08  Ben Elliston  <bje@au.ibm.com>

        * arlex.l: Fix formatting.

2004-12-08  Ben Elliston  <bje@au.ibm.com>

        * doc/Makefile.am (config.texi): Emit a @set UPDATED command to
        config.texi whose value is the current month and year.
        * doc/Makefile.in: Rebuild.
        * doc/binutils.texi: Set the document subtitle to be the value of
        the Texinfo UPDATED variable (obtained from config.texi).

2004-12-07  Ben Elliston  <bje@au.ibm.com>

        PR binutils/249
        * doc/binutils.texi (def file format): New node.
        (dlltool): Use the tool name as the @chapter name, like all the
        other binutils.  Use @file{.def} throughout for consistency.

2004-12-06  Ben Elliston  <bje@au.ibm.com>

        * dlltool.c: Comment fix.

2004-12-06  Ben Elliston  <bje@au.ibm.com>

        * doc/binutils.texi: Update copyright years.

2004-12-03  Richard Sandiford  <rsandifo@redhat.com>

        * MAINTAINERS: Remove mention of config.if.

2004-11-30  Tero Niemela  <tero_niemela@yahoo.com>

        * Makefile.am: Change LOCALEDIR to $(datadir)/share.
        * Makefile.in: Regenerate.

2004-11-10  Ian Lance Taylor  <ian@wasabisystems.com>

        PR binutils/536
        * stabs.c (stab_demangle_template): Call stab_demangle_count
        rather than stab_demangle_get_count to get the length of a pointer
        target.

2004-11-10  Danny Smith  <dannysmith@users.sourceforge.net>

        * defparse.y: Remove unnecessary commas from token list.

2004-11-08  Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>

        * doc/binutils.texi (nm): Update description of weak symbols.

2004-11-03  Nick Clifton  <nickc@redhat.com>

        * readelf.c (do_debug_ranges): New variable.
        (usage): Document new switch: -wR or --debug-dump=Ranges.
        (parse_args): Handle new switch.  Replace switch statement for the
        long options with a more compact table structure.
        (process_section_headers): Allow the dumping of .debug_ranges
        sections if so requested.
        (debug_displays): Likewise.
        (load_debug_range): New function: Grabs the contents of a
        .debug_ranges section.
        (free_debug_range): New function: Releases the grabbed
        .debug_ranges section.
        (decode_64bit_range): New function: Displays a 64-bit range in a
        .debug_ranges section.
        (decode_range): New function: Displays a 32-bit range in a
        .debug_ranges section.
        (read_and_display_attr_value): Record the value of DW_AT_low_pc
        attributes.  Use decode_ranges() to display a DW_AT_ranges
        attribute.
        (display_debug_info): Use load_debug_range() and
        free_debug_range().
        (display_64bit_debug_ranges): New function.  Displays the contents
        of a 64-bit format .debug_ranges section.
        (display_debug_ranges): New function: Displays the contents of a
        32-bit .debug_ranges section.

        (main): Move cmdline_dump_sects and num_cmdline_dump_sects into the
        global scope.
        (process_object): Initialise the dump_sects array from the
        cmdline_dump_sects array before processing each object file.

        (streq, strneq): New macros.  Use them to replace occurrences of
        strcmp() and strncmp().

        (debug_information): New structure array to replace
        debug_line_pointer_sizes array.
        (num_debug_info_entries): New variable to replace
        num_debug_line_pointers.
        (get_pointer_size_of_comp_unit): New function: Returns the pointer
        size of a given compilation unit.
        (get_debug_info): New function to replace
        get_debug_line_pointer_sizes.
        (display_debug_lines): Use the new functions.
        (display_debug_loc): Likewise.

        (disassemble_section): Change return type to int.
        (display_debug_lines): Move local variables to their
        innermost scope.
        (display_debug_section): Likewise.  Also record the return value
        of functions called and pass this back to the parent.  Also only
        warn about undumped sections when the user explicitly requested
        their dumping.

        (debug_apply_rela_addends): Allow relocations against STT_OBJECT
        types as well.

        * NEWS: Mention the support for decoding .debug_ranges sections.
        * doc/binutils.texi: Document the new command line switch to
        readelf.

2004-11-03  Randolph Chung  <tausq@debian.org>

        * readelf.c (ia64_unw_aux_info, ia64_unw_table_entry): Rename from
        unw_aux_info and unw_table_entry.
        (find_symbol_for_address): Pass symtab and strtab info explicitly.
        (dump_ia64_unwind): Rename unw_{aux_info,table_entry} with ia64_
        prefix.
        (slurp_ia64_unwind_table): Likewise.
        (ia64_process_unwind): Rename from old process_unwind.
        (hppa_unw_aux_info): New.
        (dump_hppa_unwind): New.
        (slurp_hppa_unwind_table): New.
        (hppa_process_unwind): New.
        (process_unwind): Factor out common unwinding checks; dispatch to
        unwind handler based on machine type.

2004-11-02  Nick Clifton  <nickc@redhat.com>

        * readelf.c (display_debug_lines): Fix typo in error message.

2004-10-26  Mark Mitchell  <mark@codesourcery.com>

        * readelf.c (get_note_type): Handle notes not in core files.
        (process_note_sections): New function.
        (process_corefile_contents): Rename to ...
        (process_notes): ... this.
        (process_object): Call process_notes, not
        process_corefile_contents.
        * doc/binutils.texi: Update readelf -n documentation.

2004-10-26  Jakub Jelinek  <jakub@redhat.com>

        * ar.c (extract_file): Set atime to mtime for ar xo.

2004-10-25  Ian Lance Taylor  <ian@wasabisystems.com>

        * stabs.c (stab_demangle_v3_arglist): New static function, broken
        out of stab_demangle_v3_argtypes.
        (stab_demangle_v3_argtypes): Call it.
        (stab_demangle_v3_arg): Handle DEMANGLE_COMPONENT_FUNCTION_TYPE.
        If we find an unrecognized component, print out its number.

2004-10-25  David Mosberger  <davidm@hpl.hp.com>

        * readelf.c (slurp_ia64_unwind_table): Support relocations against
        non-section symbols by adding in the symbol value.

2004-10-25  Nick Clifton  <nickc@redhat.com>

        PR 465
        * readelf.c (dynamic_strings_length): New global variable.
        (VALID_DYNAMIC_NAME, GET_DYNAMIC_NAME): New macros for accessing
        strings in the dynamic string table.
        (process_section_headers): Initialise dynamic_strings_length.
        (process_dynamic_section): Likewise.
        (process_object): Reset dynamic_string_length when the buffer is freed.
        (dynamic_sections_mips_val): Use the new macros.
        (process_dynamic_section): Likewise.
        (process_version_sections): Likewise.
        (process_symbol_table): Likewise.
        (process_syminfo): Likewise.
        (process_mips_specific): Likewise.
        (dump_relocations): Add a new parameter 'strtablen' and use this
        to verify that string offset in a given reloc is valid.  Print a
        suitable error message otherwise.
        (process_relocs): Pass the new argument to dump_relocations.

2004-10-23  Aaron W. LaFramboise  <aaron98wiridge9@aaronwl.com>

        * dlltool.c: Include <assert.h>.
        (PREFIX_ALIAS_BASE): Define.
        (struct export): Add member import_name;
        (def_exports): Set import_name.
        (make_one_lib_file): Remove prefix alias code, use import_name
        in .idata$6.
        (gen_lib_file): Create and delete aliases.

2004-10-19  H.J. Lu  <hongjiu.lu@intel.com>

        * readelf.c (process_section_groups): Free symtab after use.

2004-10-18  Tommy Pettersson <ptp@lysator.liu.se>
            Nick Clifton  <nickc@redhat.com>

        * strings.c (usage): Place radix values for -t option into the
        correct order.

        * objcopy.c (add_redefine_syms_file): Change error messages to use
        <filename>:<linenumber>: format for easier parsing by automatic
        tools.

        * srconv.c (show_usage): Fix spelling typo.

        * windres.c (format_from_filename): Suggest the use of -J instead
        of -I if the file type cannot be determined.

2004-10-18  Aaron W. LaFramboise  <aaron98wiridge9@aaronwl.com>

        * strings.c: Include <sys/stat.h>.

2004-10-18  Alan Modra  <amodra@bigpond.net.au>

        * budemang.c (demangle): Fix thinko.

        * budemang.c (demangle): Handle "@plt" suffix.

2004-10-14  Nick Clifton  <nickc@redhat.com>

        * nm.c (usage): Fix description of --special-syms switch.

2004-10-13  Jakub Jelinek  <jakub@redhat.com>

        * strings.c (statbuf): New typedef.
        (file_stat): Define.
        (strings_object_file): Avoid using get_file_size, instead do the
        checks here, using file_stat.
        * configure.in (HAVE_STAT64): New test.
        * configure: Rebuilt.
        * config.in: Rebuilt.

2004-10-12  Paul Brook  <paul@codesourcery.com>

        * readelf.c (decode_ARM_machine_flags): Support EABI version 4.

2004-10-11  Alan Modra  <amodra@bigpond.net.au>

        * objdump.c (dump_symbols): Fix thinko last change.  Improve error
        messages.

2004-10-08  Nick Clifton  <nickc@redhat.com>

        * nm.c: Add a new switch --special-syms which, if enabled, will
        include the ARM Mapping symbols in nm's output.
        (usage): Mention the switch.
        (filter_symbols): Handle the switch.
        * objdump.c: Add a similar switch.
        (usage): Mention the switch.
        (dump_symbols): Handle the switch.
        * doc/binutils.texi: Document the new switches.
        * NEWS: Mention the new switches.

2004-10-08  Daniel Jacobowitz  <dan@debian.org>

        * readelf.c (get_x86_64_section_type_name): New function.
        (get_section_type_name): Use it.

2004-10-08  Aaron W. LaFramboise  <aaron98wiridge9@aaronwl.com>

        * dlltool.c (make_one_lib_file): Revert 2004-09-02 and 2004-09-04
        patches.
        * doc/binutils.texi (dlltool): Revert 2004-09-06 patch.

2004-10-07  Alexandre Oliva  <aoliva@redhat.com>

        * readelf.c (get_machine_flags): Don't fall through into m68k cpu
        types.

2004-10-01  Paul Brook  <paul@codesourcery.com>

        * readelf.c (get_arm_section_type_name): New function.
        (get_section_type_name): Use it.

2004-09-28  Nick Clifton  <nickc@redhat.com>

        * nm.c: Reorder functions to eliminate most of the static function
        prototypes.

2004-09-22  Alan Modra  <amodra@bigpond.net.au>

        * readelf.c (process_program_headers): Don't include .tbss in non-TLS
        segments.

2004-09-17  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am: Run "make dep-am".
        * Makefile.in: Regenerate.
        * config.in: Regenerate.
        * configure: Regenerate.
        * doc/Makefile.in: Regenerate.
        * po/binutils.pot: Regenerate.

2004-09-12  Alan Modra  <amodra@bigpond.net.au>

        * readelf.c (decode_location_expression): Sign extend value for
        DW_OP_const1s, DW_OP_const2s, DW_OP_const4s, DW_OP_bra, DW_OP_skip.

2004-09-09  Nick Clifton  <nickc@redhat.com>

        PR 363
        * ar.c (replace_members): Do not use get_file_size as
        ar_emul_append correctly handles missing files.

2004-09-07  H.J. Lu  <hongjiu.lu@intel.com>

        * configure: Regenerated with autconfig 2.13.

2004-09-06  Danny Smith  <dannysmith@users.sourceforge.net>

        * doc/binutils.texi (dlltool): Update --add-underscore, --kill-at
        documentation.

2004-09-06  Michael Wardle  <mbw@endbracket.net>

        * doc/binutils.texi (objdump): Document that the -x switch includes
        the effect of the -p switch.

2004-09-04  Danny Smith  <dannysmith@users.sourceforge.net>

        * dlltool.c (make_one_lib_file): Test if internal_name was
        specified by user before using it.

2004-09-02  Carlo Wood  <carlo@alinoe.com>

        PR binutils/351
        * dlltool.c (make_one_lib_file): For IDATA6 take the name from
        exp->internal_name if it is present.

2004-09-02  Alexandre Oliva  <aoliva@redhat.com>

        * MAINTAINERS: Add self as co-maintainer of FR-V.
        * readelf.c (get_machine_flags): Print FR-V cpu types.

2004-08-28  Alan Modra  <amodra@bigpond.net.au>

        * nm.c (show_synthetic): New var.
        (long_options): Add "synthetic".
        (usage): Here too.
        (display_rel_file): Handle show_synthetic.

2004-08-28  Alan Modra  <amodra@bigpond.net.au>

        * objdump.c (dump_bfd): Pass both symbol tables to
        bfd_get_synthetic_symtab.

2004-08-17  Jakub Jelinek  <jakub@redhat.com>

        * objdump.c (dump_bfd): For relocatable objects, pass syms instead
        of dynsyms to bfd_get_synthetic_symtab.

2004-08-16  Alan Modra  <amodra@bigpond.net.au>

        * readelf.c (debug_apply_rela_addends): New function, extracted from..
        (display_debug_info): ..here.
        (display_debug_frames): Call debug_apply_rela_addends.  Don't do
        DW_EH_PE_pcrel adjustment for ET_REL.

2004-08-06  Andreas Schwab  <schwab@suse.de>

        * readelf.c (dump_relocations): Fix typo when calculating
        sec_index.

2004-08-02  Jakub Bogusz  <qboosh@pld-linux.org>

        * dllwrap.c (deduce_name): Fix typos introduced when program_name
        was renamed to prog_name.

2004-07-29  Alexandre Oliva  <aoliva@redhat.com>

        * readelf.c (get_machine_flags <EM_SH>): Handle EF_SH2A and
        EF_SH2A_NOFPU.

2004-07-28  Alexandre Oliva  <aoliva@redhat.com>

        2003-07-08  Alexandre Oliva  <aoliva@redhat.com>
        * readelf.c (get_machine_flags <EM_SH)): Handle EF_SH4_NOFPU and
        EF_SH4A_NOFPU.
        2003-06-12  Alexandre Oliva  <aoliva@redhat.com>
        * readelf.c (get_machine_flags <EM_SH>): Print SH ISA name.

2004-07-21  H.J. Lu  <hongjiu.lu@intel.com>

        * objcopy.c (filter_symbols): Use bfd_coff_get_comdat_section
        to access comdat.
        * objdump.c (dump_section_header): Likewise.

2004-07-15  Aravinda PR  <aravindapr@rediffmail.com>

        * nlmconv.c (main): Pass map_file argument to link_inputs.
        (link_inputs): Use map_file argument if it is defined.

2004-07-13  Nick Clifton  <nickc@redhat.com>

        * dllwrap.c: Replace 'program_name' with 'prog_name' to avoid
        conflicts with exported global defined in bucomm.h.
        (deduce_name): Rename parameter 'program_name' to 'name' to avoid
        shadowing the global defined in bucomm.h.

2004-07-12  Aaron W. LaFramboise  <aaron98wiridge9@aaronwl.com>

        * dlltool.c (ext_prefix_alias): New global variable.
        (make_one_lib_file): Add aliases with prefixes for external
        and import definitions.
        (usage): Document -p option.
        (long_options): Add --ext-prefix-alias option.
        (main): Handle -p.
        * doc/binutils.texi: Document new switch.
        * NEWS: Mention new switch.

2004-07-09  Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>

        * binutils/dlltool.c (asm_prefix): Add parameter: name.
        No underscore for symbols beginning with ?.
        (ASM_PREFIX): Add parameter: NAME.
        (gen_exp_file): Use new parameter.
        (make_label): Likewise.
        (make_imp_label): Likewise.
        (make_one_lib_file): Likewise.

2004-07-07  Tomer Levi  <Tomer.Levi@nsc.com>

        * MAINTAINERS: Added myself to the list.
        * readelf.c: Include "elf/crx.h".
        (guess_is_rela): Handle EM_CRX.
        (get_machine_name): Likewise.
        (dump_relocations): Likewise.

2004-07-03  Aaron W. LaFramboise  <aaron98wiridge9@aaronwl.com>

        * doc/binutils.texi (nm): Clarify weak symbol description.

2004-06-24  Ben Elliston  <bje@au.ibm.com>

        * readelf.c (get_segment_type): Display "GNU_STACK", not just
        "STACK", when a PT_GNU_STACK segment is encountered.

2004-06-24  Alan Modra  <amodra@bigpond.net.au>

        * objcopy.c (copy_section): Don't set _cooked_size.

2004-06-22  Alan Modra  <amodra@bigpond.net.au>

        * readelf.c (Elf32_Word): Delete.
        (get_32bit_dynamic_section): Handle SGI ELF dynamic segment.
        (get_64bit_dynamic_section): Likewise.

        * readelf.c (get_32bit_dynamic_section): Stop at first DT_NULL entry.
        (get_64bit_dynamic_section): Likewise.

        * readelf.c (dynamic_nent): New variable.
        (get_32bit_dynamic_section): Set it.
        (get_64bit_dynamic_section): Here too.
        (process_dynamic_section): Use it instead of dynamic_size.
        (process_syminfo): Likewise.

        * readelf.c (get_32bit_dynamic_section): Correct number of entries
        translated from external to internal form.
        (get_64bit_dynamic_section): Likewise.

2004-06-18  Jie Zhang  <zhangjie@magima.com.cn>

        * readelf.c (process_program_headers): When locating the dynamic
        section use the section table if it is present.
        (dynamic_segment): Renamed to dynamic_section.
        Replace references to dynamic segment with references to dynamic
        section, except where appropriate.
        (dynamic_segment_mips_val): Rename to dynamic_section_mips_val.
        (dynamic_segment_parisc_val): Rename to dynamic_section_parisc_val.
        (dynamic_segment_ia64_val): Rename to dynamic_section_ia64_val.
        (get_32bit_dynamic_segment): Rename to get_32bit_dynamic_section.
        Remove tag counting code as it is no longer needed.
        (get_64bit_dynamic_segment): Rename to get_64bit_dynamic_section.
        Remove tag counting code as it is no longer needed.
        (process_dynamic_segment): Rename to process_dynamic_section.

2004-06-15  Alan Modra  <amodra@bigpond.net.au>

        * objcopy.c (copy_section): Use bfd_get_section_size instead of
        _raw_size or bfd_get_section_size_before_reloc.  Don't set reloc_done.
        (compare_section_lma): Likewise.
        * addr2line.c (find_address_in_section): Likewise.
        * coffgrok.c (do_sections_p1): Likewise.
        * dlltool.c (scan_drectve_symbols): Likewise.
        * nlmconv.c (main): Likewise.
        (copy_sections): Likewise.
        (powerpc_mangle_relocs): Likewise.
        * objdump.c (disassemble_section): Likewise.
        * prdbg.c (find_address_in_section): Likewise.
        * size.c (berkeley_sum): Likewise.
        * srconv.c (wr_ob): Likewise.
        * strings.c (strings_a_section): Likewise.

2004-05-28  Ian Lance Taylor  <ian@wasabisystems.com>

        * readelf.c (decode_ARM_machine_flags): Add EF_ARM_VFP_FLOAT.

2004-05-17  David Heine  <dlheine@tensilica.com>

        * objcopy.c (setup_bfd_headers): New function.
        (copy_object): Call setup_bfd_headers.

2004-05-13  Paul Brook  <paul@codesourcery.com>

        * readelf.c (display_debug_frames): Handle dwarf3 format CIE
        entries.

2004-05-13  Nick Clifton  <nickc@redhat.com>

        * po/fr.po: Updated French translation.

2004-05-11  Jakub Jelinek  <jakub@redhat.com>

        * readelf.c (get_segment_type): Handle PT_GNU_RELRO.

2004-05-07  H.J. Lu  <hongjiu.lu@intel.com>

        * readelf.c (section_groups): New.
        (group_count): New.
        (section_headers_groups): New.
        (process_section_groups): Populate group_count, section_groups
        and section_headers_groups.
        (process_unwind): Support section group.
        (process_object): Always call process_section_groups. Free
        section_groups and section_headers_groups.

2004-04-30  H.J. Lu  <hongjiu.lu@intel.com>

        * readelf.c (process_section_headers): Use %3lu on sh_info.

2004-04-30  Michael Deutschmann  <michael@talamasca.ocis.net>

        * ranlib.sh: Quote $1 argument in case it contains spaces.

2004-04-27  John Paul Wallington  <jpw@gnu.org>

        * objcopy.c (copy_usage, strip_usage): Fix spelling.

2004-04-26  H.J. Lu  <hongjiu.lu@intel.com>

        * readelf.c (do_section_groups): New.
        (options): Add --section-groups/-g.
        (usage): Mention --section-groups/-g.
        (parse_args): Support --section-groups/-g.
        (get_group_flags): New.
        (process_section_groups): New.
        (process_object): Call process_section_groups.

2004-04-24  Alan Modra  <amodra@bigpond.net.au>

        * objdump.c (disassemble_section): Don't disassemble sections
        without SEC_HAS_CONTENTS.

2004-04-22  Jakub Jelinek  <jakub@redhat.com>

        * objdump.c (synthsyms, synthcount): New variables.
        (disassemble_data): Use dynsyms for stripped binaries or libraries.
        Add synthetized symbols.
        (dump_bfd): For disassemble, initialize dynsyms always and
        also synthsyms.  Free synthsyms and clear {sym,dynsym,synth}count
        before returning.

2004-04-14  Alan Modra  <amodra@bigpond.net.au>

        * strings.c (print_strings): Cast file_off to unsigned long in
        printf arg list.

2004-04-07  Benjamin Monate  <benjamin.monate@cea.fr>

        PR 86
        * arsup.c (ar_save): Use smart_rename.

2004-04-01  Dean Luick <luick@cray.com>

        * readelf.c (display_debug_pubnames): Align offset and data
        columns.
        (read_and_display_attr_value): Add missing break;
        (debug_displays): Enable the display of the .debug_pubtypes
        section.

2004-03-30  Stan Shebs  <shebs@apple.com>

        * mpw-config.in, mpw-make.sed, mac-binutils.r: Remove MPW
        support files, no longer used.

2004-03-23  Paul Brook  <paul@codesourcery.com>

        * readelf.c (decode_ARM_machine_flags): Add EABI v3.

2004-03-21  Richard Henderson  <rth@redhat.com>

        * readelf.c (display_debug_frames): Don't crash for mismatched
        DW_CFA_restore_state.

2004-03-19  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am: Run "make dep-am".
        * Makefile.in: Regenerate.
        * aclocal.m4: Regenerate.
        * config.in: Regenerate.
        * configure: Regenerate.
        * po/binutils.pot: Regenerate.

2004-03-15  Nathan Sidwell  <nathan@codesourcery.com>

        * objdump.c (struct SFILE): Replace current pointer with pos
        offset, rename size to alloc.
        (objdump_sprintf): Avoid unnecessary copies in the common case
        (disassemble_bytes): Keep sfile live throughout the
        function. Adjust usage appropriately.

2004-03-10  Ben Elliston  <bje@gnu.org>

        * MAINTAINERS: Update my mail address.

2004-03-08  Danny Smith  <dannysmith@users.sourceforge.net>

        * deflex.l: Handle "PRIVATE" string.
        * defparse.y (%token): Add PRIVATE.
        (%type): Add opt_PRIVATE.
        (expline): Pass opt_PRIVATE to def_exports.
        (opt_PRIVATE): Handle PRIVATE token.
        * dlltool.h (def_exports): Add 7th param for private flag to
        declaration.
        * dlltool.c: Add PRIVATE to comment on EXPORTS syntax.
        (struct export): Add 'private' field.
        (def_exports): Set 'private' field of struct exports.
        (scan_drectve_symbols): Adjust calls to def_exports.
        (scan_filtered_symbols): Likewise.
        (dump_def_info): Print 'private' field.
        (gen_def_file): Likewise.
        (gen_lib_file): Skip generation of lib object if private.
        Delete tmp object files in same order as they were generated.
        Don't delete non-existent private object files.

2004-02-27  Andreas Schwab  <schwab@suse.de>

        * ar.c (main): Support POSIX-compatible argument parsing.

2004-02-23  Daniel Lucq  <daniel@lucq.org>

        * readelf.c (process_mips_specific): Print conflictsno as an
        unsigned long.

2004-02-21  Dmitry Timoshkov  <dmitry@baikal.ru>

        * dlltool.c (gen_exp_file): Always output names for forwarded symbols.

2004-02-19  Jakub Jelinek  <jakub@redhat.com>

        * objcopy.c (copy_section): Avoid warnings.

2004-02-14  Andrew Cagney  <cagney@redhat.com>

        * ar.c (remove_output): Use bfd_cache_close.
        * arsup.c (ar_end): Ditto.

2004-01-21  Roland McGrath  <roland@redhat.com>

        * readelf.c (get_note_type): Match NT_AUXV.

2004-01-20  Nick Clifton  <nickc@redhat.com>

        * version.c (print_version): Update copyright year to 2004.

2004-01-14  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>

        * acinclude.m4: Quote names of macros to be defined by AC_DEFUN
        throughout.
        * aclocal.m4: Regenerate.
        * configure: Regenerate.

2004-01-12  Jakub Jelinek  <jakub@redhat.com>

        * objcopy.c: Include elf-bfd.h.
        (is_strip_section): Don't strip debugging sections if
        STRIP_NONDEBUG.
        (setup_section): If STRIP_NONDEBUG make SEC_ALLOC sections
        ~(SEC_LOAD | SEC_HAS_CONTENTS) and on ELF targets also SHT_NOBITS.

        * objcopy.c (copy_section): Free relpp if relcount == 0.

2004-01-12  Ian Lance Taylor  <ian@wasabisystems.com>

        * stabs.c (parse_stab_argtypes): Handle g++ ABI version 3 names.
        (stab_demangle_argtypes): Likewise.
        (stab_demangle_v3_argtypes): New static function.
        (stab_demangle_v3_arg): New static function.

2004-01-12  Nick Clifton  <nickc@redhat.com>

        * objcopy.c (copy_object): Make the function boolean, returning
        FALSE upon failure.
        (copy_archive): Handle the return value from copy_object.
        (copy_file): Likewise.

2004-01-07  Nick Clifton  <nickc@redhat.com>

        * readelf.c (find_section): New function.  Locates a named
        section.
        (get_debug_line_pointer_sizes): New function:  Initialises the
        debug_line_pointer_sizes array.
        (display_debug_lines): Call get_debug_line_pointer_sizes.
        (display_debug_loc): Likewise.
        (load_debug_loc): Use find_section.
        (load_debug_str): Likewise.
        (display_debug_info): Likewise.
        (prescan_debug_info): Delete.
        (debug_displays): Remove prescan field.
        (process_section_contents): Do not perform prescans.

2004-01-03  Alan Modra  <amodra@bigpond.net.au>

        * objcopy.c (filter_bytes): Delete.  Move code to..
        (copy_section): ..here.  Simplify size adjustment.  Divide
        section lma by interleave.

2004-01-02  Nick Clifton  <nickc@redhat.com>

        * po/ru.po: New file: Russian translation.
        * configure.in (ALL_LINGUAS): Add ru
        * configure: Regenerate.

For older changes see ChangeLog-0203
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: