1 Mon Oct 10 13:50:30 1994 J.T. Conklin (jtc@rtl.cygnus.com)
3 * nlmconv.c (link_inputs): Pass -Ur flag to ld so that the
4 ctor/dtor tables needed by C++ programs are built.
6 Sun Oct 9 18:04:00 1994 Jim Wilson (wilson@sphagnum.cygnus.com)
8 * Makefile.in (srconv.o): Add dependence on sysroff.c.
10 Tue Oct 4 12:19:51 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
12 * configure.in: Use ${config_shell} when running config.bfd.
14 * Makefile.in (sysroff.h): Split target away from sysroff.c.
15 (srconv.o, sysdump.o): New targets.
16 (srconv, sysdump): Don't depend upon sysroff.c.
18 Wed Sep 28 13:04:34 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
20 * Makefile.in (arparse.c): Don't ignore errors from mv.
21 (sysinfo.c): Likewise. Also, depend upon arparse.c, to prevent a
22 parallel make from trying to build both arparse.c and sysinfo.c
24 (nlmheader.c): Similar change.
25 (arparse.h): Separate target from arparse.c, so that a parallel
26 make does not try to build both at once. Depend upon arparse.c.
27 (sysinfo.h): Similar change.
29 * objdump.c (disassemble_data): Pass the reloc buffer to free, not
30 the pointer used to loop over the relocs.
32 Sat Sep 24 16:16:57 1994 Stan Shebs (shebs@andros.cygnus.com)
34 * objdump.c (disassemble_data): Cast result of xmalloc.
36 Wed Sep 21 19:30:35 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
38 * objdump.c (sorted_syms, sorted_symcount): New global variables.
39 (objdump_print_address): Use sorted_syms and sorted_symcount
40 instead of syms and symcount.
41 (disassemble_data): Don't bother to get the relocs before looping
42 over the sections. Before filtering and sorting the symbol table,
43 copy it into sorted_syms.
45 Fri Sep 16 11:27:39 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
47 * objdump.c (struct objdump_disasm_info): Add field require_sec.
48 (objdump_print_address): If aux->require_sec, require that the
49 symbol be in aux->sec even if HAS_RELOC is not set. If we can't
50 find a smaller symbol in the right section, look for a larger one.
51 (disassemble_data): Set aux.require_sec around the
52 objdump_print_address call for the instruction address.
54 Thu Sep 15 21:43:17 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
56 * ar.c: Call xexit rather than exit.
57 (output_filename, output_file, output_bfd): New static variables.
58 (remove_output): New static function.
59 (main): Call xatexit (remove_output). Call xexit rather than
61 (extract_file): Set output_filename and output_file while output
63 (write_archive): Likewise, but use output_bfd, not output_file.
64 * arsup.c: Include libiberty.h. Call xexit rather than exit.
67 * objdump.c (disassemble_all): New global variable.
68 (usage): Document --disassemble-all.
69 (long_options): Add disassemble-all as a synonym for -D.
70 (compare_symbols): Make pointers const.
71 (compare_relocs): New static function.
72 (disassemble_data): Rename disassemble to disassemble_fn to avoid
73 shadowing. If dump_reloc_info, print relocs along with
74 disassembly. Skip sections which are not SEC_CODE unless
75 disassemble_all or only is set.
76 (display_bfd): Don't call dump_relocs if disassemble is set.
77 (main): Accept and handle -D.
78 * binutils.texi: Document -D/--disassemble-all.
79 * objdump.1: Likewise.
81 Wed Sep 14 12:19:07 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
83 * objdump.c (disassemble_data): Initialize prevline to 0. Make
84 prev_function non const. Copy functionname into an malloc buffer
85 when setting prev_function, instead of assuming that the string
88 * nm.c: Include libiberty.h.
89 (sort_by_size): New static variable.
90 (long_options): Add --size-sort.
91 (usage): Mention --size-sort.
92 (numeric_forward): Make static. Change from void * to PTR.
93 (numeric_reverse): Likewise.
94 (non_numeric_forward, non_numeric_reverse): Likewise.
95 (sorters): Change declaration from void * to PTR.
96 (size_forward, sort_symbol_by_size): New static functions.
97 (display_rel_file): Handle sort_by_size.
98 (filter_symbols): If sort_by_size, discard absolute and undefined
100 * binutils.texi (nm): Document --size-sort.
101 * nm.1: Document --size-sort.
103 Tue Sep 13 21:06:06 1994 Jeff Law (law@snake.cs.utah.edu)
105 * objcopy.c (copy_main): Initialize input_filename and
106 output_filename to NULL.
108 Tue Sep 13 14:17:24 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
110 * Makefile.in (version.o): Depend upon Makefile, so that version.o
111 gets rebuilt when make variable VERSION is changed.
113 * objdump.c (dump_section_header): Print the SEC_NEVER_LOAD flag.
115 Wed Aug 24 12:40:09 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
117 * configure.in: Change i[34]86 to i[345]86.
119 Tue Aug 23 11:00:40 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
121 * ar.c (ranlib_touch): Don't update the archive map if there isn't
124 Mon Aug 22 16:02:18 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
126 * ar.c: Include libiberty.h.
127 (inarch): Remove variable.
128 (map_over_members): Make static. Add arch argument, and use it
129 instead of inarch. Change all callers.
130 (main): Treat --version as -v. Accept -t argument. Accept any
131 number of archive arguments. Catch and use open_inarch return
132 value, rather than using inarch.
133 (open_inarch): Return newly opened BFD, rather than using inarch.
134 (do_quick_append): Make archive_filename const.
135 (write_archive): Add iarch argument, and use it instead of inarch.
137 (delete_members, move_members, replace_members): Likewise.
138 (ranlib_only): Don't exit on success. Catch and use open_inarch
140 (ranlib_touch): New function.
141 * arsup.h (map_over_members): Don't declare.
142 (ar_end, ar_extract): Declare.
143 (open_inarch): Change return value in declaration to bfd *.
144 * arsup.c (map_over_list): Make static. Always pass two arguments
145 to function. Add arch argument, and use it instead of inarch.
147 (ar_directory_doer): Make static. Add ignored second argument.
149 (ar_directory): Use open_inarch return value rather than inarch.
150 (ar_addlib_doer): Make static.
151 (ar_addlib): Use open_inarch return value rather than inarch.
152 (ar_extract): Remove unused local variable abfd.
154 Thu Aug 11 14:55:57 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
156 Add support for removing named sections to objcopy and strip.
157 * objcopy.c (struct section_list): Define.
158 (remove_sections): New static variable.
159 (strip_options, copy_options): Add remove-section.
160 (copy_usage, strip_usage): Mention -R and --remove-section.
161 (setup_section): If section is in remove_sections list, ignore it.
162 (copy_section): Likewise.
163 (strip_main, copy_main): Handle -R.
164 * binutils.texi, objcopy.1, strip.1: Document new options.
166 Wed Aug 10 10:19:55 1994 Stan Shebs (shebs@andros.cygnus.com)
168 * nlmconv.c (powerpc_mangle_relocs): Rename symvalue to sym_value,
169 so as not to conflict with the symvalue typedef in bfd.h.
171 Mon Aug 1 13:19:09 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
173 * nlmheader.y: Per current NetWare docs, accept a revision number
174 of 0 and treat a revision number greater than 26 as 0.
176 Mon Jul 25 12:58:36 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
178 * objdump.c (objdump_print_address): Correct handling of end of
179 symbols when looking for next symbol with a different value.
181 Fri Jul 22 16:48:34 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
183 * nm.c (numeric_forward): Treat undefined symbols as "less than"
184 defined symbols with zero values. If numeric values are equal, or
185 both symbols are undefined, sort alphabetically. Don't assume
186 that the difference of two bfd_vma values will truncate to "int"
187 and still have the same sign.
188 (numeric_reverse): Call numeric_forward and negate the result.
189 (print_symbol_info_bsd): For undefined symbols, print leading
190 spaces equivalent to the width of a printed bfd_vma, rather than
191 assuming that 8 will look right.
193 Fri Jul 22 10:36:50 1994 Steve Chamberlain (sac@jonny.cygnus.com)
195 * coffgrok.c (doit): Zero all fields of new structure.
196 * srconv.c (sysroff_swap_*_out): Remove redundant trailing arg.
197 * sysinfo.y: Generate sysroff_swap_*_out without requiring extra
200 Fri Jul 22 10:09:53 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
202 * nlmheader.y: Make "stack" and "stacksize" synonyms in the lexer
203 rather than the parser.
205 Thu Jul 21 10:25:09 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
207 * config/mh-alphaosf, config/mh-apollo68v, config/mh-delta88:
210 Sat Jul 16 22:34:39 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
212 * objdump.c (slurp_dynamic_symtab): Try to get the dynamic symbols
213 even if the bfd is not marked DYNAMIC. ELF executables are not
214 marked DYNAMIC, but do have dynamic symbols.
216 Fri Jul 15 01:41:35 1994 Steve Chamberlain (sac@jonny.cygnus.com)
218 * coffgrok.c (do_where): Make data with no type 'int'.
219 (do_define): Keep info on source file of a symbol.
220 * coffgrok.h (coff_symbol): New field.
221 * srconv.c (PROGRAM_VERSION): Now 1.3
222 (wr_rl): Use external ref number for symbol.
223 (wr_dus): Only keep one source file per debug unit.
224 (wr_dln): Always emit line numbers for first source file,
225 (wr_globals): Emit globals in the du of their owning source file.
227 Mon Jul 11 15:59:03 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
229 * nlmheader.y: Null terminate var_hdr->threadName.
231 Fri Jul 8 17:33:22 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
233 * Makefile.in (syslex.o, sysinfo.o): Permit C source files to be
234 in $(srcdir), as they will be for FSF releases.
236 Wed Jul 6 01:13:14 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
238 * nlmconv.c (setup_sections): Preserve existing section flags when
239 copying in flags from a new section.
241 Tue Jul 5 15:56:01 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
243 * objcopy.c: Include libiberty.h.
244 (copy_file): If output_target is NULL, set it to the target of the
247 Wed Jun 29 17:17:14 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
249 * nlmconv.c (link_inputs): Fixed memory allocation bug.
251 Thu Jun 23 12:52:46 1994 David J. Mackenzie (djm@rtl.cygnus.com)
253 * configure.in: Change --with-targets to --enable-targets.
255 Tue Jun 21 12:53:21 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
257 * Makefile.in (sysinfo): Does not depend upon $(ADDL_LIBS).
259 * nlmconv.c (powerpc_build_stubs): Don't generate the PowerPC
260 NetWare custom header; no longer needed.
261 (powerpc_mangle_relocs): Convert relocs against the uninitialized
262 data section into relocs against the data section.
264 * configure.in: Set nlmconv_defs to -DNLMCONV_cputype for all the
265 netware targets. Write it into Makefile as NLMCONV_DEFS.
266 * Makefile.in (nlmconv.o): Pass $(NLMCONV_DEFS) to $(CC).
267 * nlmconv.c: Only compile code for specific CPU types if
268 NLMCONV_cputype is defined.
270 * nlmconv.c (main): Change uses of bfd_abs_section, etc., to use
271 bfd_abs_section_ptr or bfd_is_abs_section, etc.
272 (i386_mangle_relocs, alpha_mangle_relocs): Likewise.
273 (powerpc_build_stubs): Likewise.
274 * nm.c (filter_symbols, print_symbols): Likewise.
275 * objcopy.c (filter_symbols): Likewise.
276 (mark_symbols_used_in_relocations): Likewise.
277 * objdump.c (remove_useless_symbols, dump_relocs): Likewise.
278 * size.c (sysv_internal_printer): Likewise.
280 Mon Jun 20 16:43:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
282 * Makefile.in (MANPAGES): Remove $(DEMANGLER_PROG).
283 (install): Install it explicitly, from build dir, not srcdir.
285 Mon Jun 20 16:29:54 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
287 * objdump.c: Don't include elf/internal.h.
288 (bfd_elf_find_section): Don't declare.
289 (read_section_stabs): No special handling for ELF. Always read
292 Thu Jun 16 17:25:20 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
294 * configure.in: Set UNDERSCORE in Makefile based on result of
295 invoking config.bfd with a second argument of ``_''.
296 * Makefile.in (underscore.c): Depend upon Makefile. Don't try to
297 run $(CC) and $(NM), just use $(UNDERSCORE). Create via temporary
299 (demangle.o): Remove target.
300 ($(NM_PROG)): Don't depend upon demangle.o, and don't link against
301 demangle.o. It's in libiberty anyhow.
302 (cplus-dem.o): Don't depend upon demangle.o.
303 * binutils.texi: Mention -n and --no-strip-underscores arguments
306 Wed Jun 15 12:10:31 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
308 * nm.c (long_options): Add --no-demangle to turn off --demangle,
309 and --no-cplus for Linux compatibility.
310 (usage): Mention --no-demangle.
311 * binutils.texi: Document --no-demangle.
313 Fri Jun 10 15:41:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
315 * nm.c: HOST_64_BIT was renamed to BFD_HOST_64_BIT.
317 * objcopy.c (copy_archive): Make the temporary directory in the
318 same directory as the output BFD, since we may not have write
319 permission on the current directory. Set the permissions of the
320 new directory to 0700, not 0777.
322 Mon Jun 6 21:36:43 1994 D. V. Henkel-Wallace (gumby@cygnus.com)
324 * configure.in: if this is an rs6000 (and we're not building for
325 any other bfd targets) then build only nm (collect needs it on
328 * Makefile.in: define TOOL_PROGS which the list of programes to
329 install in $tooldir -- replaces a hard-coded list.
331 Fri Jun 3 10:59:18 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
333 * objdump.c (display_target_list): Remove unused local ok.
335 Thu May 26 18:05:52 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
337 * config/mh-alphaosf (CFLAGS): Don't specify both -g and -O;
338 they're not compatible under native cc. Use -O1 instead.
340 * Makefile.in (VERSION): Updated to cygnus-2.4.1.
342 Changes from binutils-2.4 net release:
344 * Makefile.in (MANPAGES): Use $(DEMANGLER_PROG).
345 ($(DEMANGLER_PROG).1): Build from cxxfilt.man, using sed.
346 * cxxfilt.man: Renamed from c++filt.1, replaced "c++filt" with
347 magic token to be replaced by sed.
349 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
351 * configure.bat: update for latest makefile.in
353 Fri May 13 23:25:13 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
355 * bucomm.c: Check ANSI_PROTOTYPES rather than __STDC__.
357 Tue May 10 18:22:06 1994 Jason Molenda (crash@sendai.cygnus.com)
359 * objcopy.c (copy_section): Set section size correctly if using
362 Sat May 7 16:49:36 1994 Steve Chamberlain (sac@cygnus.com)
364 * Makefile.in: Add rule for sysinfo.h
366 Fri May 6 12:18:33 1994 Steve Chamberlain (sac@cygnus.com)
368 * Makefile.in (SRCONV_PROG): Define.
369 (PROGS): Use $(SRCONV_PROG) too.
371 Thu May 5 19:41:43 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
373 * Makefile.in (DISTSTUFF): Add sysinfo.c, syslex.c, in case
374 someone configures with `targets=all'.
375 (distclean): Remove y.*.
376 (syslex.o): Depend on sysinfo.h.
377 (sysinfo.c): Rename y.tab.h to sysinfo.h.
378 (install-info): Don't try to install into $(infodir)/$(srcdir).
379 * syslex.l: Include sysinfo.h, not y.tab.h.
381 Thu May 5 11:50:55 1994 Ken Raeburn (raeburn@kr-pc.cygnus.com)
383 * syslex.l (yywrap): Define as function if not defined as a macro.
385 * Makefile.in (objdump.o): Deleted special rule.
386 * configure.in: Don't bother building ARCHDEFS variable for
388 * objdump.c (ARCH_*): Deleted handling.
389 (disassemble_data): Call `disassembler' from opcodes library.
391 Thu May 5 13:28:42 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
393 * Makefile.in (install): Correct handling of $(tooldir) and
394 $(bindir) being on different devices.
396 Fri Apr 29 09:50:38 1994 Steve Chamberlain (sac@cygnus.com)
398 * sysdump.c (h8300, sh): Add declarations.
400 Wed Apr 27 11:25:18 1994 Steve Chamberlain (sac@cygnus.com)
402 * Makefile.in (syslex, sysinfo): Use CC_FOR_BUILD.
403 * coffdump.c, coffgroc.c, coffgrog.h, srconv.c, sysdump.c,
404 sysroff.info: Major changes.
406 Tue Apr 26 18:18:24 1994 Stan Shebs (shebs@andros.cygnus.com)
408 * objdump.c (print_section_stabs): Indicate the stab header symbol
409 more clearly, print numbers of unrecognized stab n_type values.
411 Tue Apr 26 16:22:55 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
413 * nlmconv.c (copy_sections): Copy arelent pointers, not arelents.
415 Mon Apr 25 16:14:32 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
417 * Makefile.in (distclean): Remove $(PROGS) and underscore.c.
419 Fri Apr 22 11:14:19 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
421 * nlmconv.c (setup_sections): Remove special handling of .reginfo
423 (copy_sections): Likewise.
424 (alpha_mangle_relocs): Use bfd_ecoff_get_gp_value rather than the
425 special ECOFF .reginfo section.
427 * objcopy.c (copy_object): Call bfd_copy_private_bfd_data after
428 copying everything else, to let it fiddle with the file in its
431 * objdump.c: Include libiberty.h.
432 (display_target_list): If a format fails, just go on to the next
433 one. Check return value of bfd_set_format.
434 (display_info_table): Likewise. Don't increment loop variable in
435 for loop test, since that skips the first element.
436 (display_target_tables): Rewrite loop for clarity. Ensure that it
437 always prints at least one element.
439 * nlmconv.c (main): Use CyGnUsEx rather than CyGnUsSeCs for
440 sections header. Rename from cygnus_sections to cygnus_ext.
442 Thu Apr 21 12:12:26 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
444 * objdump.c (_DUMMY_NAME_): Don't define.
445 (display_target_list): Use tmpnam to get a file name rather than
446 using _DUMMY_NAME_. Unlink it when done.
447 (display_info_table): Likewise.
449 * nlmconv.c (secsec): New static variable.
450 (main): Create .nlmsections section in output BFD. Store
451 information about it in sections header.
452 (setup_sections): Allocate space in sections header.
453 (copy_sections): Copy zero sized sections. Put information about
454 each section in the sections header.
456 Wed Apr 20 14:34:51 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
458 * nlmconv.c (powerpc_build_stubs): Take new outbfd argument.
459 Change caller. Create custom header for new PowerPC NetWare
462 * Makefile.in (nlmheader.o, nlmconv.o): Update dependencies.
463 * nlmconv.c: Include bfd.h and libiberty.h with "", not <>.
464 * nlmheader.y: Include bfd.h with "", not <>.
466 Wed Apr 13 10:52:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
468 * objdump.c: Do an ifdef on __GO32__, not unix.
470 Wed Apr 6 21:54:49 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
472 Added -D (--dynamic) option to nm and -T (--dynamic-syms) and -R
473 (--dynamic-reloc) arguments to objdump.
474 * nm.c (dynamic): New static variable.
475 (long_options): Added "dynamic".
476 (usage): Mention -D and --dynamic.
477 (main): Add D to getopt string. Handle -D by setting dynamic.
478 (display_rel_file): If dynamic is non-zero, read dynamic symbols
479 rather than normal symbols.
480 * nm.1: Updated for -D (--dynamic) option.
481 * objdump.c (dump_dynamic_symtab): New global variable.
482 (dump_dynamic_reloc_info): New global variable.
483 (dynsyms, dynsymcount): New global variables.
484 (usage): Mention -R, -T, --dynamic-syms and --dynamic-reloc.
485 (long_options): Added "dynamic-reloc" and "dynamic-syms".
486 (slurp_symtab): If no symbols, return rather than exit.
487 (slurp_dynamic_symtab): New function.
488 (display_bfd): Handle dump_dynamic_symtab and
489 dump_dynamic_reloc_info.
490 (dump_symbols): Take new dynamic argument, indicating whether to
491 display dynamic symbols.
492 (dump_relocs): Move most printing into dump_reloc_set.
493 (dump_dynamic_relocs): New function.
494 (dump_reloc_set): New function, extracted from dump_relocs.
495 (main): Add R and T to getopt string. Handle -T by setting
496 dump_dynamic_symtab and -R by setting dump_dynamic_reloc_info.
497 * objdump.1: Updated for -R (--dynamic-reloc) and -T
498 (--dynamic-syms) options.
499 * binutils.texi: Updated for new nm and objdump options.
501 Wed Mar 30 15:52:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
503 Update for recent BFD changes to symbol and reloc reading. Rename
504 all uses of get_symtab_upper_bound to bfd_get_symtab_upper_bound.
506 * coffgrok.c (symcount): Change to long.
507 (do_sections_p1): Check for error return from
508 bfd_get_reloc_upper_bound. Change relcount to long, and check for
509 error from bfd_canonicalize_reloc.
510 (coff_grok): Change storage to long. Check for error from
511 bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
512 * nlmconv.c (main): Change symcount, newsymalloc, newsymcount, and
513 i to long. Check for error from bfd_get_symtab_upper_bound and
514 bfd_canonicalize_symtab.
515 (copy_sections): Change reloc_size and reloc_count to long. Check
516 for error from bfd_get_reloc_upper_bound and
517 bfd_canonicalize_reloc.
518 (mangle_relocs, i386_mangle_relocs, alpha_mangle_relocs): Change
519 reloc_count_ptr argument to long *. Make corresponding changes to
520 variables loaded from *reloc_count_ptr.
521 * nm.c (display_rel_file): Change storage and symcount to long.
522 Check for errors from bfd_get_symtab_upper_bound and
523 bfd_canonicalize_symtab.
524 * objcopy.c (filter_symbols): Change symcount, src_count and
526 (copy_object): Change symcount to long. Pass another argument to
527 fprintf. Check for errors from bfd_get_symtab_upper_bound and
528 bfd_canonicalize_symtab.
529 (copy_section): Change relcount to long. Check for errors from
530 bfd_get_reloc_upper_bound and bfd_canonicalize_reloc.
531 (mark_symbols_used_in_relocations): Change relcount and i to long.
532 Check for errors form bfd_get_reloc_upper_bound and
533 bfd_canonicalize_reloc.
534 * objdump.c (storage): Remove global variable.
535 (symcount): Changed to long.
536 (slurp_symtab): New local variable storage. Check for errors from
537 bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
538 (remove_useless_symbols): Change return value and count to long.
539 (objdump_print_address): Change min, max, thisplace and i to long.
540 (disassemble_data): Change i to long.
541 (dump_symbols): Change count to long.
542 (dump_relocs): Change relcount to long. Check for errors from
543 bfd_ret_reloc_upper_bound and bfd_canonicalize_reloc.
544 (display_info_table): Add casts when passing LONGEST_ARCH for
547 Tue Mar 29 14:59:04 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
549 * nm.c (display_archive): Close each archive element after it has
551 * objdump.c (display_file): Likewise.
553 Mon Mar 28 13:04:08 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
555 * configure.in: Change error message to refer to bfd/config.bfd
556 rather than bfd/configure.in.
558 Sun Mar 27 16:23:39 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
560 * More fixes for object formats which allow multiple sections
562 * objcopy.c (setup_section): Make a new output section even if
563 one already exists with the given name.
564 (copy_section): Use isection->output_section rather than trying
565 to look the output section up by its (possibly non-unique) name.
567 * Makefile.in (install-info): Look for binutils.info in the
568 current directory, then in $(srcdir). Don't use $<.
570 Mon Mar 21 12:55:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
572 * objdump.c (objdump_print_address): Make static. Declare with
573 prototype. Change vardiff from int to bfd_signed_vma. Correct
574 binary search termination condition. When looking for same
575 section symbol in relocatable file, handle final symbol correctly.
577 Sun Mar 20 11:26:36 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
579 * Makefile.in: Avoid bug in hpux sed.
581 * objcopy.c: Changes to keep it from stripping symbols used
582 in output relocations.
583 (mark_symbols_used_in_relocations): New function. Mark symbols
584 used in output relocations with BSF_KEEP.
585 (filter_symbols): Do not strip symbols marked with BSF_KEEP.
586 (copy_object): Reorder actions. First setup sections, then
587 build the output symbol table, then copy the section contents.
589 Fri Mar 18 10:53:55 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
591 * ar.c (write_archive): Allocate space for the null byte. From
592 Robert Lipe <robertl@arnet.com>.
594 Thu Mar 17 16:20:28 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
596 * Makefile.in: Built nm.new and strip.new to avoid problems with
597 collect when . is in PATH.
598 (STRIP_PROG): Change from strip to strip.new.
599 (NM_PROG): Change from nm to nm.new.
600 (install): Remove the .new when installing.
602 Wed Mar 16 16:27:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
604 * nlmconv.c (powerpc_build_stubs): Set BSF_DYNAMIC flag for each
605 symbol for which we build a stub.
606 (powerpc_mangle_relocs): Only reset TOC pointer for a call to a
607 symbol with BSF_DYNAMIC flag set.
609 Tue Mar 15 23:04:13 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
611 * objcopy.c (filter_symbols): Use bfd_is_local_label to determine
612 if a symbol represents a compiler-generated local label.
613 (copy_object): Give the BFD backends a chance to copy any private
614 bfd data from the input BFD to the output BFD.
615 (setup_section): Give the BFD backends a chance to copy any private
616 section data from the input section to the output section.
618 Mon Mar 14 11:15:58 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
620 * objcopy.c (mangle_section): Delete unused function.
621 (setup_section): Set osection here instead of calling
622 mangle section to do it.
624 Mon Mar 14 12:11:01 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
626 * ar.c (write_archive): Close inarch before unlinking it.
628 Fri Mar 11 22:20:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
630 * nlmconv.c (main): For PowerPC, call powerpc_build_stubs and
631 powerpc_resolve_stubs. Use __GOT0, not __toc_start. Handle it if
632 the start and end symbols are not in the text section.
633 (struct powerpc_stub): New struct definition.
634 (powerpc_stubs, powerpc_stub_insns): New static variables.
635 (powerpc_initial_got_size): New static variable.
636 (powerpc_build_stubs): New function.
637 (powerpc_resolve_stubs): New function.
638 (powerpc_mangle_relocs): Clear extraneous data in .got section.
639 Rearrange reloc handling to handle ELF relocs that are not
640 partial_inplace. Resolve PC relative relocs.
642 Wed Mar 9 13:48:11 1994 Steve Chamberlain (sac@jonny.cygnus.com)
644 * ar.c (move_members): Fix it so that the abi positional modifiers
645 don't delete all archive members following the insert point.
647 Tue Mar 8 13:14:43 1994 Steve Chamberlain (sac@jonny.cygnus.com)
649 * coffgrok.[ch]: New files, understand coff objects.
650 * coffdump.c: Uses coffgrok to dump out the debug info of a coff
652 * sysroff.info: Description of a SYSROFF object file.
653 * sysinfo.y, syslex.l: Parse info file, generate a reader, writer,
654 header files and a printer.
655 * srconv.c: Uses coffgrok.c and sysroff.info to convert a coff
656 file to a SYSROFF file.
658 Sat Feb 26 13:35:26 1994 Stan Shebs (shebs@andros.cygnus.com)
660 * ar.c (do_quick_append): Pad with a genuine character 10,
661 rather than whatever '\n' might happen to be.
663 Tue Feb 22 18:25:52 1994 Ian Lance Taylor (ian@cygnus.com)
665 * nlmconv.c (main): Ignore debugging symbols when looking for
666 special symbols by name.
668 Sun Feb 20 18:47:42 1994 Ian Lance Taylor (ian@lisa.cygnus.com)
670 * nlmconv.c: Include libiberty.h.
672 Support for PowerPC NetWare.
673 * nlmconv.c (main): For PowerPC NetWare, automatically define the
674 special symbols __toc_start.
675 (select_output_format): Handle bfd_arch_powerpc.
676 (mangle_relocs): Likewise.
677 (powerpc_mangle_relocs): New function.
679 Thu Feb 17 09:28:23 1994 David J. Mackenzie (djm@thepub.cygnus.com)
681 * ar.c, bucomm.c, nlmconv.c, nm.c, objcopy.c, objdump.c,
682 size.c: Use bfd_get_error and bfd_set_error and new error names.
684 Fri Feb 11 15:54:51 1994 David J. Mackenzie (djm@thepub.cygnus.com)
686 * objcopy.c (strip_main, copy_main): Add missing 'break' in switch.
688 Mon Feb 7 19:45:52 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
690 * objdump.c (disassemble_data): Handle bfd_arch_powerpc.
692 Sun Feb 6 22:08:20 1994 David J. Mackenzie (djm@thepub.cygnus.com)
694 * strings.c objdump.c nlmconv.c objcopy.c nm.c ar.c size.c (main):
695 Call xmalloc_set_program_name.
697 Fri Feb 4 10:46:01 1994 David J. Mackenzie (djm@thepub.cygnus.com)
699 * objcopy.c (filter_bytes): Make MEMHUNK a char *, not PTR, so we
700 can do arithmetic on it.
702 Thu Feb 3 14:06:41 1994 David J. Mackenzie (djm@thepub.cygnus.com)
704 * objdump.c (dump_section_stabs, read_section_stabs,
705 print_section_stabs): Functions broken out of dump_stabs_1.
706 Free the stabs and strings when done with them.
708 Wed Feb 2 13:42:23 1994 David J. Mackenzie (djm@thepub.cygnus.com)
710 * nlmconv.c (main): Use bfd_get_flavour instead of struct member.
711 * ar.c (print_contents, extract_file), size.c
712 (print_berkeley_format, print_sysv_format): Use bfd_get_filename and
713 bfd_my_archive instead of dereferencing the structs directly.
715 * ar.c: Use bfd_fatal and bfd_nonfatal instead of bfd_perror and exit.
716 Indent. Remove DEFUNs.
718 * nlmconv.c (main), objcopy.c (copy_file): Print matching formats
720 * nm.c (display_file, display_archive), size.c (display_bfd):
722 Print matching formats if there is an ambiguous match. Use
723 bfd_nonfatal instead of hardcoded error message if nothing matches.
725 * arsup.c, ar.c, objdump.c: Use bfd_get_filename instead of
728 * nm.c (display_archive): New function, from code in display_file.
729 (display_rel_file): Renamed from do_one_rel_file.
732 (display_archive): New function from code in display_file.
733 (display_file): Check bfd_close error return.
735 * strings.c (strings_object_file): Check bfd_check_format
738 * strings.c, objdump.c, size.c: Use bfd_nonfatal instead of bfd_perror.
740 * bucomm.c: Delete references to exit_handler. It wasn't set
741 anywhere, and now that we're using the libiberty xmalloc, it
742 wouldn't always get called before exiting.
743 (list_matching_formats): Function moved from objdump.c.
744 * bucomm.h: Declare it.
746 * objdump.c (disassemble_data): Move some variable decls closer to
747 their use. Add some comments. Replace a nested block with a
750 Mon Jan 31 18:50:41 1994 Stan Shebs (shebs@andros.cygnus.com)
752 * objdump.c (display_target_list, display_info_table): Check that
753 the bfd of the dummy output file is not null.
755 Wed Jan 26 13:13:18 1994 David J. Mackenzie (djm@thepub.cygnus.com)
757 * objcopy.c (filter_bytes): New function.
758 (copy_section): Call it.
759 (copy_options, copy_usage, copy_main): Add --byte option to
760 activate it. Appropriate the -b option (which was an undocumented
761 synonym for -F) for it, also. Add --interleave, -i option for
763 (setup_section, copy_section, mangle_section): Renamed with no `s'
765 * objcopy.1, binutils.texi: Document the new options.
767 * objdump.c (display_target_tables, display_target_list):
768 New functions broken out of display_info.
769 Eliminate some magic constants. Use more meaningful variable names.
770 (dump_bfd_header): New function broken out of display_bfd.
771 (dump_section_header): New function broken out of dump_headers.
772 (remove_useless_symbols): Don't shadow global variable name with
774 (objdump_print_address): Fix backward test.
776 Tue Jan 25 19:40:54 1994 Stan Shebs (shebs@andros.cygnus.com)
778 * bucomm.c (print_arelt_descr): Change decl of `when' to time_t.
779 * objdump.h: Removed.
781 Mon Jan 24 13:29:02 1994 David J. Mackenzie (djm@thepub.cygnus.com)
783 * objdump.c (display_file): Remove call to list_matching_formats.
784 It would never be called.
785 (list_matching_formats): Take an arg giving the list of matching
787 (display_bfd): Pass the arg, and get it filled in by calling
788 bfd_check_format_matches instead of bfd_check_format.
789 (display_info, display_info_table): target_vector was renamed to
792 * binutils.texi (objdump): Note some limitations of -h section
795 Sat Jan 22 16:20:46 1994 Stan Shebs (shebs@andros.cygnus.com)
797 * Makefile.in (MALLOC): Set to emptiness by default.
798 (ALL_CFLAGS): Add and use.
799 (arparse.h): Make it depend on arparse.y.
800 * ar.c (libbfd.h): Don't require to be in ../bfd.
801 * objdump.c (comp): Rename to compare_symbols.
803 Fri Jan 21 20:22:30 1994 David J. Mackenzie (djm@thepub.cygnus.com)
805 * objdump.c (list_matching_formats): If the file format is ambiguous,
806 print the matching names so the user can choose one.
807 (display_bfd): Call it.
808 (display_file): Call it.
810 Fri Jan 21 19:17:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
812 * objdump.c (disassemble_data): Support bfd_arch_rs6000.
814 Mon Jan 17 13:57:25 1994 Stan Shebs (shebs@andros.cygnus.com)
816 * objdump.c (stab_name): Allocate dynamically.
817 (stab_print): Use pointers to strings instead of char arrays.
818 (dump_stabs): Change alloc and init of arrays appropriately.
819 (dump_stabs_1): Always decide whether to print stab_name or
820 the stab's type number, if unnamed.
822 Fri Jan 14 14:42:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
824 * objcopy.c (strip_main, copy_main): Don't clobber the input file
827 * nlmconv.c (main): Warn about an attempt to use a shared library
828 with uninitialized data.
830 * nlmconv.c (setup_sections): Make sure that we align the
831 output_offset of each input section appropriately.
833 Thu Jan 13 17:32:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
835 * objdump.c (dump_relocs): Don't crash if section name is NULL.
837 Tue Jan 11 19:46:33 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
839 * filemode.c (filemodestring): Commented out; not used.
840 (mode_string): Use POSIX definitions.
841 (ftypelet): Likewise.
842 (rwx): Removed; no longer used.
843 * bucomm.c: Include bucomm.h.
844 (bfd_nonfatal, bfd_fatal): Argument is const.
845 (fatal): Make __STDC__ version.
846 * bucomm.h (mode_string): Declare.
847 * Makefile.in (bucomm.o): Depend upon bucomm.h
849 Sun Jan 9 12:03:20 1994 Ken Raeburn (raeburn@rtl.cygnus.com)
851 * bucomm.c (xmalloc, xrealloc): Deleted.
852 * bucomm.h (xmalloc, xrealloc): Fix prototypes, to correspond to
853 libiberty version of functions.
855 Thu Jan 6 06:18:15 1994 David J. Mackenzie (djm@thepub.cygnus.com)
857 * binutils.texi: Add a chapter summarizing the ways to select
858 aspects of the target for each program.
860 * objdump.c (long_options, usage): Add long equivalents for all
861 remaining short options that lacked them.
862 * binutils.texi objdump.1: Document them.
864 * size.c (usage): Tweak usage message.
865 * size.1: Add missing `=' in examples.
867 * binutils.texi strip.1 objcopy.1 nlmconv.1 objcopy.c nlmconv.c:
868 Use "--target=bfdname" as the option to select the BFD target,
869 like nm and size already do.
870 Reserve "--format=format" for textual output selection options, but
871 for now keep old option names as obsolete for backward compatibility.
873 * strings.c (main, strings_object_file, usage): Add --target option.
874 * binutils.texi strings.1: Document it.
876 Sat Jan 1 13:58:24 1994 David J. Mackenzie (djm@thepub.cygnus.com)
878 * ar.c (main): Add \n in error message.
880 Thu Dec 23 12:23:11 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
883 * ar.c (main): Put parens around assignment used as truth value.
884 * objcopy.c (strip_main): Remove unused variables. Return 0.
885 (copy_main): Remove unused variables. Return 0.
886 * objdump.c (display_bfd): Declare return value as void.
887 (stab_print): Use "" instead of 0 to initialize array.
888 (dump_stabs_1): Print vma using printf_vma.
889 (display_info): Put parens around assignment used as truth value.
890 * strings.c (print_strings): Cast printf arguments.
892 * objcopy.c (copy_main): Use copy_options, not strip_options.
894 * nlmheader.y (command): Warn about illegal date values.
896 Wed Dec 15 11:18:03 1993 David J. MacKenzie (djm@frosty.eng.umd.edu)
898 * bucomm.c bucomm.h: Run through indent. De-ansidecl-ify.
899 (bfd_nonfatal): New function.
900 (bfd_fatal): Call it.
902 * objcopy.c (smart_rename): Do a copy if the dest file has
903 multiple hard links. Remove source file on successful copy.
904 Try to preserve mode and owner on successful rename.
906 * objcopy.c: Run through indent. Clean up a bit.
907 Make global variables static.
908 Make {input,output}_{target,filename}, show_version local
909 to various functions.
910 New global variable `status' for exit status.
911 (strip_main, copy_main): New functions with code from main.
912 (nonfatal): New macro. Use it globally instead of bfd_perror and
915 (copy_object): Call mangle_sections with bfd_map_over_sections.
916 (mangle_sections): Adjust for new calling convention.
918 Fri Dec 10 11:28:11 1993 Ian Lance Taylor (ian@deneb.cygnus.com)
920 * nlmheader.y (command): Accept MAP and FULLMAP without arguments.
921 * nlmconv.c (main): Change error message for MAP and FULLMAP.
923 Thu Dec 9 17:47:19 1993 Ian Lance Taylor (ian@deneb.cygnus.com)
925 * nlmconv.c (main): Warn about imported symbols that are not in
926 the IMPORT list even if the IMPORT keyword is not used.
928 * nlmconv.c (debug, unlink_on_exit): New static variables.
929 (long_options): Add "debug" and "linker".
930 (main): Handle -d and -l arguments. Make command line input and
931 output files optional. Parse the command file before opening the
932 BFD's, which requires storing more information in local variables.
933 If INPUT names multiple files, link them together. Use OUTPUT for
934 the output file name if not named on command line.
935 (show_usage): Changed for new options.
936 (link_inputs): New function to automatically invoke linker to
937 handle multiple INPUT files.
938 (choose_temp_base_try, choose_temp_base, pexecute): New functions,
939 mostly copied from gcc/gcc.c.
940 * nlmconv.h (input_files, output_file): Declare.
941 * nlmheader.y (input_files, output_file): Define.
942 (command): Support INPUT with a string_list argument. Support
944 (string_list): Renamed from module_list.
945 * Makefile.in (nlmconv.o): Define LD_NAME based on
946 program_transform_name.
948 Wed Dec 8 10:09:04 1993 Ian Lance Taylor (ian@deneb.cygnus.com)
950 * nlmheader.y (nlmheader_identify): New function. Use it to print
951 the program name just once, instead of with every error message.
953 Mon Dec 6 16:11:32 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
955 * nlmconv.c (long_options): Changed --header-info to --header-file
956 to match documentation and usage message.
958 Sun Dec 5 01:31:01 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
960 * objdump.c (dump_relocs): Avoid dereferencing a NULL sym_ptr_ptr
963 Thu Dec 2 16:00:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
965 * nlmconv.c (main): Change various types from bfd_size_type to
966 size_t, since they have to be arguments to fread and fwrite.
967 Change set from char * to unsigned char *.
968 (select_output_format): Make mach argument unsigned. Handle
970 (setup_sections): Don't copy the .reginfo section of an ECOFF
971 file. Call bfd_set_reloc to initialize the relocation fields.
972 (copy_sections): Don't copy the .reginfo section of an ECOFF file.
973 Combine all relocs for a section.
974 (mangle_relocs): Change type of relocs to permit specific
975 functions to change it. Call alpha_mangle_relocs for alpha,
976 default_mangle_relocs for other architectures.
977 (default_mangle_relocs): New function. Adjust the address of all
978 relocs by the output_offset.
979 (i386_mangle_relocs): Change type of relocs argument. Cast length
980 argument to memmove to size_t.
981 (alpha_mangle_relocs): New function.
983 Wed Nov 17 17:38:58 1993 Sean Eric Fagan (sef@cygnus.com)
985 * nlmconv.c (select_output_format): Use nlm32-sparc for
988 Wed Nov 17 14:41:35 1993 Jeffrey Osier (jeffrey@thepub.cygnus.com)
990 * nlmconv.1: added man page
991 * objcopy.1: fixed format errors
993 Wed Nov 17 12:03:41 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
995 * Makefile.in: Use CFLAGS as well as LDFLAGS when linking.
997 Wed Nov 17 04:50:55 1993 David J. Mackenzie (djm@thepub.cygnus.com)
999 * strings.1: Fix typo.
1001 Mon Nov 15 12:03:20 1993 Ken Raeburn (raeburn@rtl.cygnus.com)
1003 * Makefile.in (DISTSTUFF): Build "info".
1004 (VERSION): Updated to cygnus-2.3.1; 2.3 has gone out.
1006 Sun Nov 14 00:27:24 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
1008 * objdump.c (dump_stabs): Handle stabs-in-som as implemented
1009 by the new BFD SOM assembler.
1011 Sat Nov 13 07:14:05 1993 David J. Mackenzie (djm@rtl.cygnus.com)
1013 * ar.1 c++filt.1 nm.1 objcopy.1 objdump.1 ranlib.1 size.1
1014 strings.1 strip.1: Replace \(em in NAME section with \- so
1015 makewhatis can grok it.
1017 Tue Nov 9 15:22:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1019 * nlmconv.c (i386_mangle_relocs): Adjust reloc address by
1020 section output_offset.
1022 Fri Nov 5 12:11:52 1993 Jeffrey Osier (jeffrey@thepub.cygnus.com)
1024 * binutils.texi: added nlmconv chapter
1026 Wed Nov 3 16:10:50 1993 Jeffrey Wheat (cassidy@cygnus.com)
1028 * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS
1030 Wed Nov 3 15:09:23 1993 Ken Raeburn (raeburn@rover.cygnus.com)
1032 * Makefile.in (distclean): Don't get rid of dvi or info files.
1034 Tue Nov 2 13:29:59 1993 David J. Mackenzie (djm@rtl.cygnus.com)
1036 * objcopy.c (S_ISLNK): Define as 0 if there's no S_IFLNK.
1038 Fri Oct 29 16:02:34 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1040 * binutils.texi: Move objcopy docs into alphabetical order.
1042 * objdump.c: Use xmalloc instead of malloc.
1044 Fri Oct 29 11:11:14 1993 Stan Shebs (shebs@rtl.cygnus.com)
1046 * objdump.c (info): Rename to formats_info.
1047 (dump_stabs_1): Better comments and formatting.
1049 Thu Oct 28 19:43:16 1993 Stan Shebs (shebs@rtl.cygnus.com)
1051 * ar.c (main): Always create the archive when quick appending,
1052 even if no input files have been given.
1054 Wed Oct 27 12:03:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1056 * nlmconv.c (main): Set sharedDebugRecordOffset and
1057 sharedDebugRecordCount fields in extended header.
1059 * nlmconv.c (main): Force moduleName field to upper case.
1061 Mon Oct 25 16:45:42 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1063 * objcopy.c (main): Give a usage message if there are too many
1066 Mon Oct 25 10:37:08 1993 Ken Raeburn (raeburn@rover.cygnus.com)
1068 * Makefile.in (install-info): Rewrite to take advantage of VPATH,
1069 so FSF distributions (with info files in $(srcdir)) install
1071 (DISTSTUFF): Build nlmheader.c too.
1073 Fri Oct 22 11:43:23 1993 Ken Raeburn (raeburn@rover.cygnus.com)
1075 * ar.c (program_name): Don't define here.
1076 * objdump.c: Include "bucomm.h".
1077 (xmalloc): Don't declare here.
1078 (program_name): Don't define here.
1079 (program_version): Fixed type in declaration.
1080 * size.c: Include "bucomm.h".
1081 (program_name): Don't declare here.
1083 Fri Oct 22 14:10:41 1993 Mark Eichin (eichin@cygnus.com)
1085 * objdump.c (fprintf): hide declaration in FPRINTF_ALREADY_DECLARED
1087 Fri Oct 1 12:43:00 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1089 * nlmconv.c (i386_mangle_relocs): Resolve and remove PC relative
1090 relocs against defined symbols in the same section.
1092 Thu Sep 30 16:46:26 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
1094 * Makefile.in (binutils.dvi): use TEXIDIR to find texinfo.tex
1096 Sat Sep 25 18:09:29 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1098 * objcopy.c (simple_copy, smart_rename): New functions.
1101 Fri Sep 24 15:38:29 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1103 * Makefile.in (clean, distclean): Recurse into testsuite.
1105 Thu Sep 23 01:05:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1107 * objcopy.c (setup_sections, copy_sections): If stripping, don't
1108 copy SEC_DEBUGGING sections.
1109 * objdump.c (dump_headers): Print SEC_DEBUGGING flag.
1111 * objdump.c (usage): Mention --stabs.
1113 * objcopy.c (copy_object): Copy all applicable file flags.
1114 (copy_file): Don't copy EXEC_P specially here.
1116 Mon Sep 20 19:28:57 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1118 * nlmconv.c (main): Adjust data section size to correspond to bss
1119 alignment adjustment. Clear BSF_SECTION_SYM if symbol is moved to
1120 a different section. Use time_t for time variable.
1121 (setup_sections): Only put sections with contents in output NLM.
1122 (i386_mangle_relocs): No symbols are common at this point. Add
1123 casts to avoid warnings.
1125 Fri Sep 10 11:00:40 1993 Stan Shebs (shebs@rtl.cygnus.com)
1127 * objdump.c: Made the --stabs option work for stabs-in-coff.
1128 (ELF_STAB_DISPLAY): Removed.
1129 (dump_elf_stabs): Renamed to dump_stabs, changed to run for
1130 any object file format.
1131 (dump_elf_stabs_1): Renamed to dump_stabs_1, added calls to
1132 generic BFD routines for non-ELF case, changed format of message
1133 for no-section-found case.
1134 (display_bfd): Always call dump_stabs if requested.
1135 (dump_data): Call bfd_section_size to get section size.
1137 Fri Sep 10 08:12:23 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1139 * Makefile.in (install): Don't put strings in tooldir/bin.
1141 Mon Sep 6 15:39:04 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1143 * nlmconv.c (total_bss_size): Removed.
1144 (main): Set the bss vma to always follow the data section. Move
1145 symbols into new sections, and adjust values by output_offset.
1146 (setup_sections): Don't copy all sections, but instead point all
1147 text sections to .text, all data sections to .data, and all bss
1149 (copy_sections): Adjust accordingly.
1151 Thu Sep 2 12:34:03 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1153 Only build nlmconv if configured for a NetWare target.
1154 * configure.in: If we have some *-*-netware* target, or are using
1155 all targets, set BUILD_NLMCONV to $(NLMCONV_PROG) in Makefile.
1156 * Makefile.in (PROGS): Use $(BUILD_NLMCONV) rather than
1159 Tue Aug 31 14:13:35 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1161 * objdump.c (ARCH_all): Define ARCH_hppa too.
1162 (dump_headers): Don't test for SEC_BALIGN if it's not defined by
1165 Tue Aug 31 13:29:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1167 * nlmconv.c (main): Force creation of .bss section. Set up the
1168 sections before looking at the symbols. Move all common symbols
1169 into .bss section. Automatically define _edata and _end. Only
1170 export symbols in the export list, with multiple prefixes if
1171 necessary. Warn if no version. Always create extended header.
1172 Set date automatically if not already set.
1173 (setup_sections): Count size of bss sections.
1174 (mangle_relocs, i386_mangle_relocs): Accept section argument, and
1175 take reloc_count as a changeable pointer; changed callers.
1176 (i386_mangle_relocs): Remove PC relative relocs within a section,
1177 as they require no adjustment.
1178 * nlmheader.y: Fixed memory allocation throughout: token STRING is
1179 now allocated on the heap, and freed if not needed. Null
1180 terminated copyright message. Accept version with only two
1182 (symbol_list_opt): New nonterminal, either symbol_list or empty.
1183 (symbol_list): Use left recursion to avoid overflowing parser
1185 (yylex): Rearranged beginning of line check. Accept quoted
1186 strings using single quotes. End generic argument at comment
1187 character or parentheses.
1188 (string_list_append): Fixed.
1189 (string_list_append1): New function.
1191 * bucomm.h: The first argument to xrealloc is PTR, not char *.
1192 * bucomm.c (xrealloc): Use PTR rather than char *.
1193 * Makefile.in (objdump.o): Depend upon config.status to notice
1194 --with-targets changes.
1195 (nlmconv.o): Depend upon bucomm.h.
1197 Tue Aug 17 09:46:01 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1199 * configure.in: Don't pass cpu to config.bfd.
1201 Thu Aug 12 16:43:04 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1203 * Makefile.in ($(NM_PROG)): Depend on demangle.o.
1204 (demangle.o): New target.
1205 (cplus-dem.o): Depend on it, to force compilation order when doing
1208 * nm.c (print_symbol_info_{bsd,sysv,posix}): Take a bfd arg.
1209 (struct output_fns print_symbol_info): Ditto.
1210 (long_options, usage, main): Add -C --demangle option.
1211 (print_symname): New function, demangling if requested.
1212 (print_symbols, print_symbol_info_{bsd,sysv,posix}): Use it.
1214 Wed Aug 11 22:57:23 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1216 * Makefile.in: Put CFLAGS last in compilation rules and omit from
1217 linking rules. Use ARCHDEFS to compile objdump.c.
1218 Update dependencies.
1219 * configure.in: Construct ARCHDEFS based on the BFD target makefile
1221 * objdump.c: Conditionalize calls to the print_insn_ARCH functions
1222 according to ARCHDEFS.
1224 Thu Aug 12 08:06:15 1993 Ian Lance Taylor (ian@cygnus.com)
1226 * ar.c: Removed obsolete and non-functional GNU960 code.
1228 Wed Aug 11 13:08:26 1993 Ian Lance Taylor (ian@cygnus.com)
1230 * size.c (berkeley_sum): New function.
1231 (bsssize, datasize, textsize): New global variables.
1232 (bss_section_name, data_section_name, text_section_name): Removed.
1233 (print_berkeley_format): Map berkeley_sum over all the sections,
1234 rather than only reporting sizes of specifically named sections.
1235 * Makefile.in ($(OBJDUMP_PROG)): Removed dependency on size.o.
1237 Tue Aug 10 10:46:01 1993 Ian Lance Taylor (ian@cygnus.com)
1239 * nlmconv.c, nlmconv.h, nlmheader.y: New files for program to
1240 convert object files into NetWare Loadable Modules.
1241 * Makefile.in (NLMCONV_PROG): New macro, define to be nlmconv.
1242 (PROGS): Add NLMCONV_PROG.
1243 (nlmheader.c, nlmheader.o, nlmconv.o, $(NLMCONV_PROG)): New
1246 Thu Aug 5 15:48:32 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com)
1248 * Makefile.in: define MAKEOVERRIDES to an empty string
1250 Wed Aug 4 17:08:08 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1252 * objcopy.c (copy_file): Make failures to process a file nonfatal.
1254 Mon Aug 2 11:28:23 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1256 * nm.c: Add -B option, like --format=bsd.
1258 Tue Jul 27 16:29:54 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1260 * objcopy.c (copy_file): If the file is neither an object nor an
1261 archive, give an error rather than returning success.
1263 Mon Jul 19 16:13:40 1993 Ken Raeburn (raeburn@rtl.cygnus.com)
1265 * objdump.c (objdump_print_address): Prefer non-local symbols over
1266 local ones, and especially discriminate against debugging symbols.
1267 Also, for relocateable files, try to find a symbol in the current
1268 section, instead of picking one from some random section with a
1269 convenient value (read, section offset).
1270 (disassemble_data): Cast argument to malloc to size_t first.
1271 (dump_data): Likewise.
1272 (dump_relocs): If a single section name is specified, show relocs
1273 only for that section. Otherwise, silently omit sections without
1274 relocs. Format table nicely even if values are printed using 16
1275 digits instead of 8.
1277 Fri Jul 16 15:19:59 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1279 * nm.c: Changes for final version of POSIX.2.
1280 (print_symbol_filename_{bsd,sysv,posix}): New functions.
1281 (formats): Add an element for a pointer to them.
1282 (print_symbols): Call it.
1283 (print_object_filename_posix, print_archive_member_posix): Produce
1284 output according to new POSIX.2 spec.
1286 * strings.c (print_strings): Handle STREAM being NULL.
1287 (strings_a_section): Pass a NULL.
1288 (main): Don't open /dev/null.
1290 Thu Jul 15 12:44:09 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1292 * objdump.c (disassemble_data): Handle the m88k.
1293 (display_bfd): Use bfd_errmsg, rather than just claiming that the
1294 bfd is not an object file.
1296 Mon Jul 12 17:55:34 1993 K. Richard Pixley (rich@cygnus.com)
1298 * Makefile.in (TAGS): make work again by naming directories
1299 explicitly rather than depending on undefined macros.
1300 (INSTALL_XFORM): correct bad install target.
1302 Fri Jul 2 16:58:34 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1304 * strings.c: Doc fixes.
1306 Sun Jun 27 13:35:24 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1308 * Makefile.in: Note dependencies on bucomm.h.
1309 (cplus-dem.o): Link c++filt with version.o.
1311 * strings.c: Include bucomm.h and add prototypes to other decls.
1314 * bucomm.h: Declare xrealloc.
1316 * nm.c, objcopy.c, objdump.c, size.c, strings.c (main, usage): Add
1317 --help option. Put "GNU" in the version message.
1318 (usage): Take stream and exit status as args.
1319 (main): Pass new args to usage.
1321 Fri Jun 25 23:12:12 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1323 * strings.c, strings.1: New files.
1324 * binutils.texi: Document strings.
1325 * Makefile.in: Add rules for it.
1327 Fri Jun 25 20:44:43 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1329 * objdump.c: Use size-independent bfd elf section names.
1331 Sun Jun 20 23:09:06 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1333 * objdump.c (objdump_print_address): Handle wide offsets by
1334 calling sprintf_vma.
1336 Fri Jun 18 14:29:12 1993 Per Bothner (bothner@deneb.cygnus.com)
1338 * objdump.c (syms2): Removed unused variable.
1339 * objdump.c (remove_useless_symbols): New function.
1340 * objdump.c (comp): Simplify.
1341 * objdump.c (dis-assemble_data): Make simpler and more
1342 efficient how we filter out useless symbols: Just filter
1343 BEFORE the sort (using remove_useless_symbols).
1344 * objdump.c (objdump_print_address): Simplify.
1345 Change output syntax to match gdb.
1347 Thu Jun 17 16:53:56 1993 david d `zoo' zuhn (zoo@cygnus.com)
1349 * Makefile.in: canonicalize install.sh; for use within
1350 this directory (and subdirs)
1352 Mon Jun 14 12:13:22 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
1354 * Makefile.in (install, install-info): remove parentdir support,
1355 use INSTALL_XFORM; define INSTALL_XFORM
1357 Thu Jun 10 17:29:21 1993 Per Bothner (bothner@cygnus.com)
1359 * objcopy.c (copy_object): Fix bad size passed to xmalloc().
1361 Mon Jun 7 12:41:12 1993 Per Bothner (bothner@rtl.cygnus.com)
1363 * Makefile.in (INCLUDES): Add -I../bfd for sysdep.h and bfd.h.
1364 * configure.in: No longer need to configure to get sysdep.h.
1365 * objcopy.c (copy_object): Fix symbol table handling.
1367 Fri Jun 4 17:20:03 1993 Per Bothner (bothner@cygnus.com)
1369 * objcopy.c (filter_symbols): Cannot filter the symbols
1370 in place, because that confuses the relocs, so take separate
1371 parameter for output array.
1372 * objcopy.c (sympp): Make two variables: isympp and osympp.
1373 * objcopy.c (copy_object): Allocate separate array (osympp)
1374 for filtered symbols.
1376 Fri Jun 4 10:51:44 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1378 * Makefile.in: change recursion test to presence of a configured
1381 Thu Jun 3 14:05:57 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1383 * Makefile.in (underscore.c): Hack the backquoted command so it
1384 doesn't cause Solaris make to bomb.
1386 Thu Jun 3 10:40:19 1993 Jeffrey Osier (jeffrey@cygnus.com)
1388 * Makefile.in: added c++filt and objcopy to MANPAGES variable
1389 * .Sanitize: keep c++filt.1 and objcopy.1
1391 Thu Jun 3 00:32:52 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1393 * Makefile.in: rename LOADLIBES to EXTRALIBS
1395 Wed Jun 2 18:30:24 1993 Jeffrey Osier (jeffrey@cygnus.com)
1397 * c++filt.1, objcopy.1: new man pages
1399 Fri May 28 15:01:24 1993 Per Bothner (bothner@rtl.cygnus.com)
1401 * Makefile.in (install): Also install ar and ranlib in
1402 $(tooldir)/bin; needed for building libgcc.a.
1403 * objdump.c (objdump_print_address): Fix the check
1404 "coincidental" label matches by dis-allowing undefined
1407 Thu May 27 16:58:31 1993 Jeffrey Osier (jeffrey@cygnus.com)
1409 * biutils.texi: revised c++filt chapter
1411 Wed May 26 17:24:17 1993 Ian Lance Taylor (ian@cygnus.com)
1413 * Makefile.in (FLAGS_TO_PASS): Pass down CC and CFLAGS.
1415 Tue May 25 00:26:47 1993 Ken Raeburn (raeburn@cygnus.com)
1417 * objdump.c (slurp_symtab): Print warning for bad symbol table.
1418 (bfd_elf32_find_section, Elf32_Internal_Shdr): Updated
1419 declarations and uses.
1421 * Makefile.in (DISTSTUFF): Don't build binutils.mm.
1423 Fri May 21 10:51:19 1993 David J. Mackenzie (djm@rtl.cygnus.com)
1425 * nm.c: Add -f/--format, -P/--portability, -t/--radix options.
1426 Make global variables static.
1427 (main): Make -v like -n, not -V, and make -A like -o, for POSIX.2.
1428 (set_print_radix, set_output_format,
1429 print_{object_filename,archive_filename,archive_member,symbol_info}
1430 {bsd,sysv,posix}): New functions.
1431 (display_file, print_symbols): Call them.
1433 * ar.c: Improve error messages.
1435 * nm.c (main): Handle long options that just set a flag.
1437 * nm.c (main), ar.c (do_show_version), objcopy.c (main), size.c
1438 (main): Exit after printing the version number, per the GNU coding
1441 Mon May 17 13:20:25 1993 Per Bothner (bothner@cygnus.com)
1443 * README, Makefile.in: Minor updates for 2.2.
1445 Fri May 14 11:12:26 1993 Per Bothner (bothner@cygnus.com)
1447 * Makefile.in (underscore.c): Automatically generate
1448 (using nm) a file with the variable prepends_underscore.
1449 * Makefile.in (c++filt): Link underscore.o with cplus-dem.o
1450 so that initial underscores get removed iff appropriate.
1451 * binutils.texi: Preliminary documentation for c++filt.
1452 * Makefile.in, binutils.texi: Set to version 2.2.
1454 * NEWS: Mention copy->objcopy renaming and new c++filt program.
1456 Wed May 12 12:05:36 1993 Ian Lance Taylor (ian@cygnus.com)
1458 * Makefile.in (cplus-dem.o, $(DEMANGLER_PROG)): Build the
1459 demangler via cplus-dem.o, rather than directly from the .c file.
1461 * objcopy.c: Renamed from copy.c, updated comments accordingly.
1462 * Makefile.in, binutils.texi: Renamed copy to objcopy.
1463 * is-strip.c, maybe-strip.c, not-strip.c: Updated comments for
1464 rename of copy to objcopy.
1466 Mon May 10 17:20:18 1993 Per Bothner (bothner@cygnus.com)
1468 * binutils.texi (strip, -v option): Fix typo.
1470 Fri May 7 13:57:50 1993 Ian Lance Taylor (ian@cygnus.com)
1472 * Makefile.in (RUNTEST): Define.
1473 (FLAGS_TO_PASS): Pass down RUNTEST.
1475 Tue May 4 10:06:50 1993 Ian Lance Taylor (ian@cygnus.com)
1477 * Makefile.in (DEMANGLER_PROG): Name it c++filt.
1478 (PROG): Also build and install COPY_PROG.
1480 Mon May 3 19:11:48 1993 Per Bothner (bothner@cygnus.com)
1482 * Makefile.in: Change definition of $(tooldir) to match FSF.
1484 Wed Apr 28 23:41:32 1993 David J. Mackenzie (djm@rtl.cygnus.com)
1486 * size.c (usage): Add missing options.
1487 (main): Clean up option parser.
1489 * objdump.c (usage): Add missing options.
1490 (display_file): Print program name before calling
1493 * nm.c (usage): Add missing options.
1494 (main): Clean up option parser.
1495 (display_file): Print program name before calling
1498 * copy.c (copy_usage, strip_usage): Add missing options.
1500 * ar.c (usage): New function.
1502 (open_inarch, do_quick_append): Print program name before calling
1505 Thu Apr 22 15:01:35 1993 Ian Lance Taylor (ian@cygnus.com)
1507 * nm.c (main): Accept and ignore -A and -B for MIPS compatibility.
1509 Mon Apr 19 14:06:59 1993 Rob Savoye (rob@cygnus.com)
1511 * Makefile.in: Added FLAGS_TO_PASS so tests get run on freshly
1512 built binaries if they exist. (otherwise the path)
1514 Wed Apr 7 22:22:50 1993 Rob Savoye (rob@cygnus.com)
1516 * Makefile.in: Changed check target to use DejaGnu.
1518 Thu Apr 1 12:37:13 1993 Jim Kingdon (kingdon@cygnus.com)
1520 * Makefile.in: Remove am29k-pinsn.c, i960-pinsn.c.
1521 objdump.c: a29k and i960 are `disassemble' not `print'.
1523 * objdump.c: Rename print_address to objdump_print_address
1524 and change parameters.
1525 (disassemble_data): Use objdump_print_address.
1527 Wed Mar 31 10:25:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1529 * objdump.c (disassemble_data): print_insn_sparc is now a
1530 `disassemble' not a `print'.
1531 Makefile.in: Remove sparc-pinsn.c (now in libopcodes.a).
1533 * objdump.c (disassemble_data): Use new read_memory_func stuff.
1535 Thu Mar 25 10:38:11 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1537 * objdump.c (fprintf): Declaration of variadic function had better
1538 be a prototype for ANSI C systems.
1540 Mon Mar 22 23:19:46 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1542 * Makefile.in: rename test-install to install-check
1544 Fri Mar 19 14:40:08 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1546 * objdump.c (disassemble_data): Add H8500.
1548 Fri Mar 19 10:56:51 1993 Jim Kingdon (kingdon@cygnus.com)
1550 * objdump.c (usage): Mention long options.
1552 Thu Mar 18 14:22:17 1993 Per Bothner (bothner@rtl.cygnus.com)
1554 * nm.c: Modify behavior of -o flag for archives to match
1555 BSD4.4 and Sunos 4: Prefix archive name before each line.
1557 * m68k-pinsn.c: Removed. Subsumed by ../opcodes/m68k-dis.c.
1558 * i386-pinsn.c: Removed. Subsumed by ../opcodes/i386-dis.c.
1559 * Makefile.in: Adjust accordingly.
1560 * objdump.c: Support new-style disassemblers (ones that use
1561 the interface of ../include/dis-asm.h).
1563 Thu Feb 25 15:57:00 1993 Per Bothner (bothner@rtl.cygnus.com)
1565 * Makefile.in: When making tar file, remove texinfo/*,
1566 except for texinfo/texinfo.tex.
1567 * ardup.c: Add extern declaration of strdup.
1568 * Makefile.in (testsuite): Add 'else true' since otherwise
1569 Ultrix /bin/sh complains.
1571 Wed Feb 24 19:44:18 1993 Per Bothner (bothner@rtl.cygnus.com)
1573 * Makefile.in: Set VERSION to 2.1.
1574 * README, NEWS: Updates.
1575 * nm.c: Add -v as a synonym for -V.
1577 Tue Feb 23 19:00:50 1993 Mike Werner (mtw@poseidon.cygnus.com)
1579 * configure.in: added testsuite to configdirs.
1580 * Makefile.in: added support for building testsuite.
1582 Mon Feb 22 22:52:10 1993 Per Bothner (bothner@rtl.cygnus.com)
1584 * objdump.c (disassemble_data): Print function names when
1585 given by bfd_find_nearest_line. If not - still print
1588 Mon Feb 22 07:54:03 1993 Mike Werner (mtw@poseidon.cygnus.com)
1590 * binutils/testsuite: made modifications to testcases, etc., to allow
1591 them to work properly given the reorganization of deja-gnu and the
1592 relocation of the testcases from deja-gnu to a "tool" subdirectory.
1594 Mon Feb 22 10:27:24 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1596 * objdump.c (dump_data): Free up section contents each time
1597 through the loop. Reported by minyard@bnr.ca.
1599 Sun Feb 21 10:55:55 1993 Mike Werner (mtw@poseidon.cygnus.com)
1601 * binutils/testsuite: Initial creation of binutils/testsuite.
1602 Migrated dejagnu testcases and support files for testing nm to
1603 binutils/testsuite from deja-gnu. These files were moved "as is"
1604 with no modifications. This migration is part of a major overhaul
1605 of dejagnu. The modifications to these testcases, etc., which
1606 will allow them to work with the new version of dejagnu will be
1607 made in a future update.
1609 Fri Feb 12 10:05:20 1993 Fred Fish (fnf@cygnus.com)
1611 * Makefile.in (LIBIBERTY_SRC_DIR, LIBIBERTY_BIN_DIR): New macros.
1612 * Makefile.in (LIBIBERTY): Use LIBIBERTY_BIN_DIR.
1613 * Makefile.in (DEMANGLER_PROG): New program to build. Add macro
1615 * Makefile.in (PROGS): Add DEMANGLER_PROG.
1617 Tue Jan 26 11:56:33 1993 Ian Lance Taylor (ian@cygnus.com)
1619 * copy.c, nm.c, objdump.c, size.c: Use new bfd_is_com_section
1620 macro rather than checking for equality to bfd_com_section.
1622 Fri Jan 8 15:50:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1624 * objdump.c (disassemble_data): Fix code to find first useless
1627 Thu Jan 7 13:13:31 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1629 * objdump.c (disassemble_data): Use mips_print_insn for MIPS.
1630 Don't core dump if bfd_find_nearest_line returns false.
1632 Wed Jan 6 17:14:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1634 * objdump.c (disassemble_data): know how to disassemble z8000s
1637 Wed Jan 6 15:16:27 1993 Per Bothner (bothner@cygnus.com)
1639 * arsup.h (interactive), bucomm.h (program_name): Prefix
1640 with 'extern', to avoid warnings from some compilers.
1642 Wed Jan 6 15:14:11 1993 Per Bothner (bothner@rtl.cygnus.com)
1644 * arparse.y: fix unnecessary shift/reduce
1646 Tue Dec 22 15:46:56 1992 Per Bothner (bothner@rtl.cygnus.com)
1648 * Makefile.in: Make check depend on all.
1649 * Makefile.in (distclean): Remove sysdep.h.
1650 * size.c: Use %u format where appropriate.
1651 * objdump.c: Standardize: L_SET -> SEEK_SET.
1652 * objdump.c: Use new macro bfd_asymbol_bfd.
1653 * configure.in: Allow std-host as the default ${mys_host}.
1655 Thu Dec 17 19:38:19 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1657 * Makefile.in: added dvi target, define and use TEXI2DVI
1659 Tue Dec 15 18:05:07 1992 Per Bothner (bothner@cygnus.com)
1661 * Makefile.in (dist): Fix permissions before release.
1662 * size.c: Use bfd_size_type (and long) where appropriate.
1663 * ar.c: Make writing a map the default, to be compatible
1664 with SYSV and Posix.2. Remove some bogus kludges that
1665 handled __.SYMDEF directly.
1668 Mon Nov 9 13:36:53 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1670 * Makefile.in: flex no longer needs the -S flag
1672 Sat Nov 7 15:06:13 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1674 * ar.c (extract_file): utime needs a pointer to a utimbuf
1676 * Makefile.in: handle -I includes better, adding $(BASEDIR)/bfd to
1677 the list (since some of the bfd/hosts/*.h files include other
1678 files from that directory)
1680 Fri Nov 6 00:12:51 1992 John Gilmore (gnu@cygnus.com)
1682 * i960-pinsn.c (MEM_MAX, MEM_SIZ): Set upper bound properly.
1684 Thu Nov 5 03:37:15 1992 John Gilmore (gnu@cygnus.com)
1686 Clean up some old BFD ansification macros.
1688 * arsup.h, bucomm.h, objdump.h: Remove EXFUN from binutils.
1689 It still remains as a local macro in gmalloc.c, which is derived
1690 from some other copy of GNU Malloc somewhere (FIXME).
1692 * ar.c, objdump.c, size.c: Replace EXFUN with PROTO. Make static
1694 * arsup.h: Declare extract_files.
1696 Mon Nov 2 12:42:11 1992 Ian Lance Taylor (ian@cygnus.com)
1698 * ar.c (extract_file): instead of checking USG: if POSIX_UTIME,
1699 use utime and utimbuf structure, otherwise if USE_UTIME use utime
1700 and array of two longs, otherwise use utimes.
1702 Thu Oct 15 13:57:35 1992 Per Bothner (bothner@cygnus.com)
1704 * binutils.tex: Document yesterday's changes to strip and copy.
1706 Wed Oct 14 13:22:14 1992 Per Bothner (bothner@cygnus.com)
1708 * copy.c: Re-do command-line parsing to use getopt_long().
1709 Add long option names. Re-think option letters to be more
1711 * copy.c: New function filter_symbols() for stripping only
1712 debug-symbols and/or local symbols. Use these to support
1713 the previously-missing options of the old FSF strip.
1715 Tue Oct 13 01:24:20 1992 John Gilmore (gnu@cygnus.com)
1717 * configure.in (host): Use ${srcdir}/../bfd/configure.host rather
1718 than repeating a copy of it here.
1720 Wed Oct 7 12:53:52 1992 Ken Raeburn (raeburn@cygnus.com)
1722 * copy.c (main): Even if is_strip, accept -d argument indicating
1723 alternate output format. Needed by gdb for Nindy.
1725 * m68k-pinsn.c (print_insn_arg): Handle new "`" operand type.
1727 Tue Oct 6 16:33:56 1992 Jeffrey Osier (jeffrey@cygnus.com)
1729 * binutils.texi: added documentation for "copy"
1731 Tue Oct 6 14:22:56 1992 Per Bothner (bothner at PersSony)
1733 * Makefile.in (*clean rules): Some cleaning up.
1734 * Makefile.in (dist): Make diststuff in gprof for a dist.
1736 * ar.c (do_show_version): New function.
1737 * ar.c (main): Fix so "ar -V" works.
1739 Thu Oct 1 22:44:45 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1741 * configure.in: now uses the cpu-vendor-os triple instead of
1744 Fri Sep 25 22:41:08 1992 John Gilmore (gnu@cygnus.com)
1746 * i960-pinsn.c: Change bzero to memset.
1747 * sparc-pinsn.c: Change index to strchr.
1749 Mon Sep 21 14:39:56 1992 Ian Lance Taylor (ian@cygnus.com)
1751 * m68k-pinsn (print_insn_arg, fetch_arg): added support for
1752 operands to memory management instructions, from WRS.
1754 Tue Sep 15 15:26:38 1992 Ian Lance Taylor (ian@cygnus.com)
1756 * Makefile.in (install): if $(tooldir) exists, install nm and
1757 strip in $(tooldir)/bin.
1759 Thu Sep 3 11:57:40 1992 Per Bothner (bothner@rtl.cygnus.com)
1761 * Makefile.in: Let's call it version 2.0.
1763 Wed Sep 2 00:25:13 1992 Per Bothner (bothner@rtl.cygnus.com)
1765 * Makefile.in: Bump to version 0.98.
1766 * TODO, README: Minor updates.
1768 * Makefile.in: Added mostlyclean, distclean rules,
1769 and cleaned up clean, realclean.
1771 Sun Aug 30 21:18:59 1992 Ian Lance Taylor (ian@cygnus.com)
1773 * Makefile.in: map program names through program_transform_name
1776 Sun Aug 30 18:09:03 1992 Per Bothner (bothner@rtl.cygnus.com)
1778 * Makefile.in: Bump to versions 1.97.90.
1779 * cplus-dem.c: Removed. Was nowhere used - and if some
1780 programs are changed to to demangling should now use the
1781 versions in libiberty.
1783 Thu Aug 27 12:58:09 1992 Brendan Kehoe (brendan@cygnus.com)
1785 * configure.in: add we32k
1787 Mon Aug 24 14:53:42 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1789 * ar.c (map_over_members): if the element of the archive has a
1790 null name, fill it in.
1792 * nm.c (do_one_rel_file): only warn if a bfd's flags say there
1793 will be symbols and there aren't any.
1795 Wed Aug 19 11:20:25 1992 Ian Lance Taylor (ian@cygnus.com)
1797 * m68k-pinsn.c: handle new operand type 'r', introduced for cas2.
1799 Tue Aug 18 20:45:48 1992 Rob Savoye (rob@cygnus.com)
1801 * nm.c objdump.c: Added support for a +version (-V)
1802 to print the version number.
1804 * ar.c, copy.c: Added support for a -V option to print
1807 Tue Aug 18 13:28:44 1992 Ian Lance Taylor (ian@cygnus.com)
1809 * config/mh-apollo68v: removed -g from CC definition.
1811 * Makefile.in: always create installation directories.
1813 Mon Aug 17 18:33:41 1992 Per Bothner (bothner@rtl.cygnus.com)
1815 * m68k-pinsn.c: Minor fix in style of output (don't use
1816 range to indicate floating point control registers).
1818 Tue Aug 11 23:42:21 1992 Per Bothner (bothner@cygnus.com)
1820 * ar.c (main): Don't *always* set the verbose flag!
1822 Wed Aug 5 11:25:27 1992 Per Bothner (bothner@rtl.cygnus.com)
1824 * copy.c: When is_strip (because it is invoked as the strip
1825 program), follow traditional argv processing:
1826 'strip file1 file2' now strips file1 and file2, rather
1827 than stripping file1 (as input), leaving output in file2.
1829 Mon Jul 27 16:28:08 1992 Per Bothner (bothner@rtl.cygnus.com)
1831 * objdump.c (display_info, display_info_table): Call
1832 bfd_set_format() on dummy bfd before using it (twice).
1833 * ar.c: Make sure archive is created on command 'r'
1834 even when no elements are inserted. (Clean up and
1835 simplify some non-working related code.)
1837 Mon Jul 20 02:48:38 1992 D. V. Henkel-Wallace (gumby@cygnus.com)
1839 * configure.in: hppa support doesn't assume hp OS (from sef).
1841 Sat Jul 18 14:35:22 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1843 * configure.in: recognize hppa hosts (bsd & hpux), error messages
1844 to stderr, not stdout
1846 Fri Jul 17 18:39:44 1992 K. Richard Pixley (rich@rtl.cygnus.com)
1848 * ar.1, binutils.texi, i960-pinsn.c, nm.1, objdump.1, ranlib.1,
1849 size.1, sparc-pinsn.c, strip.1: removed rcsid's.
1851 Thu Jul 16 16:55:24 1992 K. Richard Pixley (rich@rtl.cygnus.com)
1853 * Makefile.dos: removed rcsid.
1855 Thu Jul 16 08:23:07 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1857 * objdump.c (display_bfd): print state of BFD_IS_RELAXABLE too
1859 Tue Jun 30 20:26:15 1992 D. V. Henkel-Wallace (gumby@cygnus.com)
1861 * Makefile.in: Add program_suffix (parallel to program_prefix)
1863 Thu Jun 25 04:52:45 1992 John Gilmore (gnu at cygnus.com)
1865 * nm.c (sorters): Lint. Remove excess whitespace.
1867 Wed Jun 24 13:48:07 1992 Per Bothner (bothner@cygnus.com)
1869 * nm.c (valueof macro): Add missing parentheses.
1870 (Their lack screwed up numeric_forward().)
1872 Sun Jun 14 10:33:27 1992 John Gilmore (gnu at cygnus.com)
1874 * objdump.c (dump_elf_stabs): Also dump .stab.index and
1875 .stab.excl sections.
1876 (dump_elf_stabs_1): Split out main body of old dump_elf_stabs.
1877 * objdump.1, binutils.texi: Document new sections dumped.
1879 Fri Jun 12 22:23:35 1992 John Gilmore (gnu at cygnus.com)
1881 * size.c, objdump.c, bucomm.c: Lint.
1883 Thu Jun 11 01:19:06 1992 John Gilmore (gnu at cygnus.com)
1885 * objdump.c (dump_elf_stabs): New feature: --stabs prints out a
1886 .stab section from an ELF file. Installed under #ifdef
1887 ELF_STAB_DISPLAY so it can be easily disabled, since it requires
1888 bfd-internals header files and such.
1889 * objdump.1, binutils.texi: Update for --stabs. Also fix
1890 objdump's doc to use -- rather than + for long options.
1891 (FIXME: Not yet fixed everywhere in binutils.texinfo.)
1893 Wed Jun 10 07:53:24 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1895 * objdump.c(display_info), patches from
1896 mohring@informatik.tu-muenchen.de to print the table much more
1899 Thu May 28 13:36:16 1992 Per Bothner (bothner@rtl.cygnus.com)
1901 * objdump.c: Add another enum->int cast, for the sake of
1902 old compilers (such as PCC).
1904 Wed May 27 13:01:44 1992 Per Bothner (bothner@rtl.cygnus.com)
1906 * arlex.l: Don't include <sysdep.h> (unneeded conflicts).
1907 Add declaration of strdup().
1909 Fri May 22 13:40:37 1992 Per Bothner (bothner@cygnus.com)
1911 * Makefile.in: Use srcdir instead of VPATH in ldgram/ldlex
1912 rules, since these are used when building a distribution.
1913 * Makefile.in (arlex.c): Don't re-direct output, since that
1914 leaves a bogus output files if it fails.
1916 * arlex.l: Make work with lex, for what it's worth.
1917 * Makefile.in: Better lex support.
1918 * Makefile.in (dist): Generate flex and bison outputs
1921 Thu May 14 17:17:59 1992 K. Richard Pixley (rich@rtl.cygnus.com)
1923 * Makefile.in: get BISON definition right.
1925 Fri May 8 07:47:08 1992 K. Richard Pixley (rich@cygnus.com)
1927 * sanity.sh: default TMPDIR to ".".
1929 Thu May 7 12:34:50 1992 Roland H. Pesch (pesch@fowanton.cygnus.com)
1931 * binutils.texi: add doc for ar command language.
1933 Wed May 6 18:05:36 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1935 * arparse.y: make END call ar_end
1936 * arsup.c (ar_end): added, deletes temp file if archive session
1940 Wed May 6 11:08:53 1992 K. Richard Pixley (rich@rtl.cygnus.com)
1942 * Makefile.in: use bison & flex from ../ if they exist. Also,
1945 * sanity.sh: remove temporary directory when finished.
1947 Tue May 5 12:00:58 1992 Per Bothner (bothner@rtl.cygnus.com)
1949 * Makefile.in: Bump to version 1.97.
1950 * ar.c: Declare errno for machines that need it.
1952 Mon May 4 23:29:51 1992 John Gilmore (gnu@cygnus.com)
1954 * objdump.c (display_info): Handle error cases without coredump.
1955 Close the dummy temporary file we open in the loop.
1956 * Makefile.in (arsup.o): Add kludge to build with Sun Make.
1958 Fri May 1 16:20:23 1992 K. Richard Pixley (rich@cygnus.com)
1960 * Makefile.in: added test-install target.
1962 * sanity.sh: new file.
1964 * Makefile.in: use sanity test on make check.
1966 Tue Apr 21 13:38:37 1992 K. Richard Pixley (rich@cygnus.com)
1968 * Makefile.in: rework CFLAGS so that they can be passed on the
1969 command line to make. Remove MINUS_G. Default CFLAGS to -g.
1971 Wed Apr 15 14:33:07 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1973 * arsup.c, arsup.h, arparse.y, arlex.l: support for archive
1976 Fri Mar 6 21:54:53 1992 K. Richard Pixley (rich@cygnus.com)
1978 * Makefile.in: added check target.
1980 Thu Mar 5 21:35:49 1992 K. Richard Pixley (rich@cygnus.com)
1982 * Makefile.in: added clean-info target.
1984 Tue Mar 3 15:36:37 1992 K. Richard Pixley (rich@rtl.cygnus.com)
1986 * Makefile.in: remove $(COPY_PROG) from PROGS. It shouldn't be
1987 installed. added tooldir and program_prefix.
1989 Wed Feb 26 18:04:40 1992 K. Richard Pixley (rich@cygnus.com)
1991 * Makefile.in, configure.in: removed traces of namesubdir,
1992 -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
1993 copyrights to '92, changed some from Cygnus to FSF.
1995 Sun Feb 16 12:53:02 1992 Per Bothner (bothner at cygnus.com)
1997 * Makefile.in: Bump version to 1.96, and remove -beta
1998 suffix from distribution name.
1999 * m68k-pinsn.c: New macro COERCE_SIGNED_CHAR to extract
2000 the signed value of a character (even if chars are unsigned).
2001 * sparc-pinsn.c: Add new operand types.
2003 Thu Feb 6 12:14:19 1992 Steve Chamberlain (sac at rtl.cygnus.com)
2005 * objdump.c (disassemble_data): don't print a section's contents
2006 if it's not loadable (eg bss)
2008 Tue Jan 28 11:11:06 1992 Steve Chamberlain (sac at rtl.cygnus.com)
2010 * m68k-pinsn.c (print_insn_arg): fixed so that -ve branch
2011 displacements don't get printed as large +ve ones.
2013 Fri Jan 24 14:47:53 1992 Steve Chamberlain (sac at rtl.cygnus.com)
2015 * copy.c, nm.c, objdump.c, size.c : changed to use the
2019 Mon Dec 30 18:34:41 1991 Per Bothner (bothner at cygnus.com)
2021 * bucomm.c (print_arelt_descr): Tweek the output format
2022 so that 'ar tv' output follows Posix 1003.2/D11.
2023 Output is now also identical to Sun's (except __.SYMDEF).
2025 Mon Dec 30 06:09:53 1991 John Gilmore (gnu at cygnus.com)
2027 * Makefile.in: Make `make' output more readable.
2029 Wed Dec 18 15:04:45 1991 Per Bothner (bothner at cygnus.com)
2031 * Makefile.in: Bump to version 1.94.
2033 Wed Dec 11 16:48:09 1991 Steve Chamberlain (sac at cygnus.com)
2035 * ar.c: added "b" to fopens for dos
2036 * configdj.bat, makefile.dos new files from DJ
2038 Tue Dec 10 04:07:26 1991 K. Richard Pixley (rich at rtl.cygnus.com)
2040 * Makefile.in: infodir belongs in datadir.
2042 Sat Dec 7 17:09:37 1991 Steve Chamberlain (sac at rtl.cygnus.com)
2044 * bucomm.h: created to hold prototypes of bucomm.c
2045 * objdump.h: created to hold prototyes of objdump.c
2046 * am29k-pinsn.c: include objdump.h
2047 * ar.c: include bucomm.h, get ar.h from the right place and
2049 * bucomm.c: defunize bfd_fatal
2050 * copy.c: include bucomm.h, lint.
2051 * i960-pinsn.h: include bucomm.h
2052 * m68k-pinsn.h: lint
2053 * nm.c: include bucomm.h, lint
2055 * sparc-pinsn.c: include objdump.h
2059 Fri Dec 6 23:02:14 1991 K. Richard Pixley (rich at rtl.cygnus.com)
2061 * Makefile.in: added standards.text support. install using
2062 INSTALL_PROGRAM and INSTALL_DATA.
2064 * configure.in: configure now does all of it's work from objdir so
2065 make file existence tests against ${srcdir}.
2067 Thu Dec 5 22:46:22 1991 K. Richard Pixley (rich at rtl.cygnus.com)
2069 * Makefile.in: idestdir and ddestdir go away. Added copyrights
2070 and shift gpl to v2. Added ChangeLog if it didn't exist. docdir
2071 and mandir now keyed off datadir by default.
2073 Wed Dec 4 22:42:03 1991 Per Bothner (bothner at cygnus.com)
2075 * Makefile.in: Bump to version 1.93.
2076 * Makefile.in: Add make-strip.o:maybe-strip.c dependency
2077 for make versions that provide half-baked VPATH-support (e.g. Sun's).
2078 * size.c: Improvements suggested by
2079 "david d [zoo] zuhn" <zoo@aps1.spa.umn.edu>:
2080 - Don't emit (Berkeley) headers if no files were found.
2081 - Return a non-zero return code on failure.
2083 Sat Nov 30 21:34:19 1991 Steve Chamberlain (sac at rtl.cygnus.com)
2085 Changes due to include file renaming:
2086 * am29k-pinsn.c: a29k-opcode.h -> opcode/a29k.h
2087 * sparc-pinsn.c: sparc-opcode.h -> opcode/sparc.h
2088 * m68k-pinsn.c: m68k-opcode.h -> opcode/m68k.h
2089 * nm.c: stab.gnu.h -> aout/stab_gnu.h
2091 Tue Nov 19 19:20:43 1991 Per Bothner (bothner at cygnus.com)
2093 * README: Mention MINIMIZE flag for bfd's make.
2095 Mon Nov 18 12:05:37 1991 Per Bothner (bothner at cygnus.com)
2097 * README: Various improvements.
2099 Sun Nov 17 23:40:59 1991 Per Bothner (bothner at cygnus.com)
2101 * Makefile.in: Bump to version 1.92.
2102 * version.c, Makefile.in: Get version string from Makefile.
2103 * copy.c, is-strip.c, not-strip.c, maybe-strip.c, Makefile.in:
2104 Make the same change that we earlier did for ar/ranlib:
2105 Generate two different binaries for strip and copy and use
2106 a global variable with different values to distinguish
2107 ostrip from copy. (-1 means to use argv[0] to decide,
2108 so you can get the old behavior, but it is no longer the default).
2109 * copy.c (copy_file): Set EXEC_P of output bfd if input is so.
2110 * copy.c (main): If is_strip==-1, compare last 5 chars
2111 of argv[0], not the whole path.
2112 * copy.c (main): Return 0, not 1.
2113 * copy.c (setup_sections): Fix due to change in bfd_make_section
2114 now failing if asked for a duplicate section.
2115 * strip.c, ostrip.c: Removed obsolete files.
2116 * ar.c, not-ranlib.c, maybe-ranlib.c:
2117 Change encoding of is_ranlib variable to be consistent
2118 with is_strip for strip.copy (i.e -1 to means use argv[0]).
2120 Thu Nov 14 20:11:02 1991 Per Bothner (bothner at cygnus.com)
2122 * version.c (program_version): Update to version 1.92.
2124 Tue Nov 12 16:17:53 1991 Per Bothner (bothner at cygnus.com)
2126 * ar.c (get_pos_bfd): Previous fix was missing a "break".
2128 Thu Nov 7 08:55:56 1991 Steve Chamberlain (sac at cygnus.com)
2130 * am29k-pinsn.c: Fixed bug in mtacc, dmac and fmac instruction
2131 encodings. (Thaks to David Wood)
2133 Sun Nov 3 14:50:23 1991 Per Bothner (bothner at cygnus.com)
2135 * Makefile.in ($(DIST_NAME).tar.Z), TODO: Various fixes.
2136 * ar.c (get_pos_bfd): Fix to handling of before/after
2137 positioning options.
2138 * bucomm.c (fatal): MISSING_VFPRINTF is no longer an issue,
2139 since libiberty contains vfprintf etc if otherwise missing.
2140 * m68k-pinsn.c (print_insn_arg): Support BB/BW/BL
2141 type operands, as used by branch instructions.
2142 * nm.c: Delegate printing of symbols to BFD,
2143 by using bfd_print_symbol to do the formatting.
2145 Mon Oct 28 11:20:47 1991 Steve Chamberlain (steve at cygnus.com)
2147 * ar.c (write_archive.c): added unlink before rename since some
2148 systems can't rename onto an existant file.
2150 Mon Oct 21 09:47:23 1991 Steve Chamberlain (steve at rtl.cygnus.com)
2152 * nm.c: now doesn't crash if a symbol with no section and no
2155 Thu Oct 17 15:25:50 1991 Per Bothner (bothner at cygnus.com)
2157 * Makefile.in, version.c: Bump to version 1.91.
2159 Wed Oct 16 11:45:36 1991 Per Bothner (bothner at cygnus.com)
2161 * Makefile.in, ar.c, bucomm.c, copy.c, cplus-dem.c, filemode.c,
2162 i960-pinsn.c, m68k-pinsn.c, nm.c, objdump.c, size.c, sparc-pinsn.c,
2163 * strip.c: Add or update Copyright notice.
2164 * TODO: Add note on 'nm -a'.
2165 * version.c: Update version number to 1.90.
2166 * Makefile.in: Fix making of documentation for dist.
2168 Tue Oct 15 00:17:17 1991 Per Bothner (bothner at cygnus.com)
2171 * Makefile.in: New kludgy rules for making a tarfile.
2172 * Makefile.in: Fix bindir path.
2174 Mon Oct 14 17:34:29 1991 Roland H. Pesch (pesch at cygnus.com)
2176 * Makefile.in: add targets binutils.mm, binutils.me
2178 Fri Oct 11 22:44:21 1991 John Gilmore (gnu at cygnus.com)
2180 * Makefile.in: Avoid Sun Make VPATH bugs by adding dependencies.
2182 Fri Oct 11 12:51:33 1991 Roland H. Pesch (pesch at cygnus.com)
2184 * Makefile.in: add target "binutils.ms"
2186 * binutils.texinfo: minor restructuring for texi2roff comfort.
2188 Fri Oct 11 04:12:28 1991 John Gilmore (gnu at cygnus.com)
2190 Restructure configuration scheme for bfd, binutils, ld.
2192 * include/sys/h-*.h: Move to bfd/hosts/h-*.h.
2193 * configure.in: Revise to symlink sysdep.h to ../bfd/hosts/h-xxx.h.
2194 Change some config names to match other dirs.
2195 * *.c: Include bfd.h before sysdep.h, so ansidecl and PROTO()
2197 * Makefile.in: Use -I. to get sysdep.h.
2199 Wed Oct 9 22:42:56 1991 Per Bothner (bothner at cygnus.com)
2201 * nm.c (print_symbols): Handle NULL name field of symbol.
2202 * Makefile.in: Removed spurious comment.
2204 Tue Oct 8 16:55:03 1991 Roland H. Pesch (pesch at cygnus.com)
2206 * binutils.texinfo: minor typos, phrasing, formatting fixes.
2208 Tue Oct 8 15:13:20 1991 Per Bothner (bothner at cygnus.com)
2210 * configure.in: Get host file from ../bfd/config, not config.
2211 * config/*: Remove config directory and its files.
2213 Tue Oct 8 13:58:59 1991 Roland H. Pesch (pesch at cygnus.com)
2215 * Makefile.in: new targets binutils.dvi, binutils.info
2217 * binutils.texinfo: remove most remaining FIXME's, delete
2218 references to __.SYMDEF by name
2221 Tue Oct 8 10:23:44 1991 Steve Chamberlain (steve at cygnus.com)
2223 * objdump.c (print_address) Print addresses nicely.
2225 Mon Oct 7 11:31:05 1991 Per Bothner (bothner at cygnus.com)
2227 * ar.c, Makefile.in, new files {is,not,maybe}-ranlib.c:
2228 Make two different binaries for ar and ranlib, instead of
2229 distinguishing them at run time using argv[0].
2230 (Old behavior is still available if you "make ar_with_ranlib",
2231 but it is not the default.)
2232 * ranlib.sh (new): An alternative one-line
2233 shell implementation of ranlib.
2235 Fri Oct 4 21:49:44 1991 John Gilmore (gnu at cygnus.com)
2237 * objdump.c: Cope with renames of a few BFD types & enums.
2239 Fri Oct 4 19:08:09 1991 Roland H. Pesch (pesch at cygnus.com)
2241 * binutils.texinfo: add new file (rudimentary docn)
2243 Mon Sep 30 12:30:39 1991 Per Bothner (bothner at cygnus.com)
2245 * config/hmake-news: Add new file (for Sony NEWSOS3).
2246 * bucomm.c (fatal): Conditionally compile fatal() depending on
2247 MISSING_VFPRINTF, and don't confuse the issue with NO_VARARGS.
2248 * objdump.c (dump_headers): Trivial output format change.
2249 * objdump.c (display_info): Loop over integers, not enums,
2250 to appease old compilers.
2252 Mon May 20 16:14:07 1991 Steve Chamberlain (steve at cygint.cygnus.com)
2254 *objdump.c *nm.c *copy.c :hanged some types to work with 64 bit object files
2256 Thu May 16 16:06:55 1991 Steve Chamberlain (steve at cygint.cygnus.com)
2258 * objdump.c (print_address): Make disasembled output more
2259 consistent with gdb and as: Add 0x when printing hex.
2260 Don't print extra leading zeros.
2261 Attempt to not print "filename.o".
2262 * objdump.c: Add some enum-to-int casts to accomodate old compilers.
2265 Fri May 3 22:21:44 1991 John Gilmore (gnu at cygint.cygnus.com)
2267 * copy.c: Change =& constructs to = &, since they confuse older
2275 version-control: never
projects / deliverable / binutils-gdb.git / blob