1 2019-07-23 Omar Majid <omajid@redhat.com>
3 * Makefile.am (AUTOMAKE_OPTIONS): Add subdir-objects
4 (GENTESTDLLSPROG): Define.
5 (TEST_PROGS): Add GENTESTDLLSPROG.
6 * Makefile.in: Regenerate.
7 * testsuite/binutils-all/objdump.exp
8 (test_objdump_dotnet_assemblies): New proc.
10 * testsuite/gentestdlls.c: New source file.
12 2019-06-28 Nick Clifton <nickc@redhat.com>
15 * objdump.c (slurp_symtab): Fail with a helpful error message if
16 the symbol table is too large. Skip this check for MMO format
19 2019-06-26 Nick Clifton <nickc@redhat.com>
22 * bucomm.c (bfd_nonfatal): If no bfd error code has been set then
23 indicate this in the output.
24 (bfd_nonfatal_message): Likewise.
26 2019-06-25 Jan Beulich <jbeulich@suse.com>
28 * readelf.c (dump_ctf_indent_lines): Rename local variable
31 2019-06-25 Jan Beulich <jbeulich@suse.com>
33 * objdump.c (dump_ctf_indent_lines): Rename local variable
36 2019-06-14 Alan Modra <amodra@gmail.com>
38 * Makefile.in: Regenerate.
39 * aclocal.m4: Regenerate.
40 * doc/Makefile.in: Regenerate.
42 2019-06-12 Christos Zoulas <christos@zoulas.com>
45 * readelf.c (process_netbsd_elf_note): Add support for
47 (process_note): Add support for PaX notes.
49 2019-06-12 Christos Zoulas <christos@zoulas.com>
52 * readelf.c (get_netbsd_elfcore_note_type): Add support for SH
55 2019-06-12 Christos Zoulas <christos@zoulas.com>
58 * readelf.c (get_netbsd_elfcore_note_type): Add support for NetBSD
61 2019-06-11 Christos Zoulas <christos@zoulas.com>
64 * readelf.c (get_alpha_symbol_other): New function.
65 (get_symbol_other): Use for Alpha symbols.
66 (is_32bit_pcrel_reloc): Add R_VAX_PCREL32.
68 2019-06-11 Christos Zoulas <christos@zoulas.com>
71 * readelf.c (decode_arm_unwind): Ensure that the local variable
72 'addr' is always initialised.
74 2019-06-10 Christos Zoulas <christos@zoulas.com>
77 * strings.c (print_strings): Use %u to print unsigned values in
80 2019-06-10 Christos Zoulas <christos@zoulas.com>
83 * arsup.c (ar_open): Use asprintf in place of xmalloc and
86 2019-06-03 Nick Clifton <nickc@redhat.com>
89 2019-05-29 Nick Clifton <nickc@redhat.com>
91 * configure.ac (LIBCTF): Export. Set to empty for non-ELF based
93 (HAVE_LIBCTF): Define if libctf support is available.
94 * Makefile.am (LIBCTF): Set value to @LIBCTF@.
95 * objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
97 * readelf.c: Likewise.
98 * configure: Regenerate.
99 * Makefile.in: Regenerate.
100 * config.in: Regenerate.
102 2019-05-30 Nick Alcock <nick.alcock@oracle.com>
104 * objdump.c (make_ctfsect): Drop cts_type, cts_flags, and
106 * readelf.c (shdr_to_ctf_sect): Likewise.
108 2019-05-30 Nick Clifton <nickc@redhat.com>
111 * readelf.c (process_version_sections): Add 0x prefix to address
112 display. Correct indentation.
114 2019-05-30 Alan Modra <amodra@gmail.com>
116 * testsuite/lib/binutils-common.exp (supports_gnu_unique): Add
117 s12z to targets not supporting this feature.
119 2019-05-30 Alan Modra <amodra@gmail.com>
121 * testsuite/lib/binutils-common.exp (run_dump_test): Support
122 tcl procedures for xfail args.
124 2019-05-29 Nick Clifton <nickc@redhat.com>
126 * README-how-to-make-a-release: Add libctf to list of directories
127 that need updates in their ChangeLogs.
129 2019-05-29 Nick Clifton <nickc@redhat.com>
131 * configure.ac (LIBCTF): Export. Set to empty for non-ELF based
133 (HAVE_LIBCTF): Define if libctf support is available.
134 * Makefile.am (LIBCTF): Set value to @LIBCTF@.
135 * objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
137 * readelf.c: Likewise.
138 * configure: Regenerate.
139 * Makefile.in: Regenerate.
140 * config.in: Regenerate.
142 2019-05-28 Nick Alcock <nick.alcock@oracle.com>
144 * MAINTAINERS: Add myself as CTF maintainer.
146 2019-05-28 Nick Alcock <nick.alcock@oracle.com>
148 * objdump.c (ctf-api.h): New include.
149 (dump_ctf_section_info): New variable.
150 (dump_ctf_section_name): Likewise.
151 (usage): Describe new options.
152 (enum option_values): Add OPTION_CTF and OPTION_CTF_PARENT.
153 (main): Use them to add --ctf and --ctf-parent.
154 (read_section_stabs): Add new parameter, entsize_ptr.
155 (find_stabs_section): Adjust accordingly.
157 (dump_ctf_indent_lines): New.
158 (dump_ctf_archive_member): New.
160 (dump_bfd): Call it. Free resources afterwards.
161 * readelf.c (ctf-api.h): New include.
163 (static bfd_boolean do_ctf): Likewise.
164 (dump_ctf_parent_name): Likewise.
165 (dump_ctf_symtab_name): Likewise.
166 (dump_ctf_strtab_name): Likewise.
167 (OPTION_CTF_DUMP): Likewise.
168 (OPTION_CTF_PARENT): Likewise.
169 (OPTION_CTF_SYMBOLS): Likewise.
170 (OPTION_CTF_STRINGS): Likewise.
173 (parse_args): Handle the new options, requesting CTF_DUMP.
174 (process_section_contents): Handle CTF_DUMP.
175 (shdr_to_ctf_sect): New.
176 (dump_ctf_indent_lines): New.
177 (dump_section_as_ctf): New.
178 (main): Free resources.
179 * Makefile.am (LIBCTF): New variable.
180 (objdump_DEPENDENCIES): Use it.
181 (readelf_DEPENDENCIES): Likewise.
182 (objdump_LDADD): Likewise.
183 (readelf_LDADD): Likewise.
184 * aclocal.m4: Regenerated.
185 * Makefile.in: Likewise.
187 * doc/binutils.texi (objdump): Document the new options.
189 * doc/ctf.options.texi: New.
190 * doc/Makefile.in: Regenerated.
191 * NEWS: Mention the new feature.
193 2019-05-27 Alan Modra <amodra@gmail.com>
195 * readelf.c (process_section_groups): Continue processing groups
196 when sh_entsize exceeds group size.
198 2019-05-24 Szabolcs Nagy <szabolcs.nagy@arm.com>
200 * readelf.c (get_aarch64_dynamic_type): Handle DT_AARCH64_VARIANT_PCS.
201 (get_aarch64_symbol_other): New, handles STO_AARCH64_VARIANT_PCS.
202 (get_symbol_other): Call get_aarch64_symbol_other.
204 2019-05-24 Alan Modra <amodra@gmail.com>
206 * objdump.c (disassemble_bytes): Set WIDE_OUTPUT in flags.
208 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com>
210 * MAINTAINERS: Add myself as the maintainer for BPF.
212 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com>
214 * readelf.c: Include elf/bpf.h.
215 (guess_is_rela): Hanle EM_BPF.
216 (dump_relocations): Likewise.
217 (is_32bit_abs_reloc): Likewise.
218 * testsuite/binutils-all/nm.exp: Add bpf-*-* to the list of
221 2019-05-21 Tamar Christina <tamar.christina@arm.com>
223 * dwarf.c (dwarf_regnames_aarch64): Add SVE registers.
224 * testsuite/binutils-all/aarch64/sve-dwarf-registers.d: New test.
225 * testsuite/binutils-all/aarch64/sve-dwarf-registers.s: New test.
227 2019-05-20 Faraz Shahbazker <fshahbazker@wavecomp.com>
230 * testsuite/binutils-all/readelf.ss-mips: Update reference output.
231 * testsuite/binutils-all/readelf.ss-tmips: Likewise.
233 2019-05-20 Nick Clifton <nickc@redhat.com>
235 * po/ca.po: Updated Catalan translation.
237 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
239 * NEWS: Mention Armv8.1-M Mainline and MVE.
241 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
243 * readelf.c (arm_attr_tag_MVE_arch): New array for Tag_MVE_arch values.
244 (arm_attr_public_tag arm_attr_public_tags): Add case for Tag_MVE_arch.
246 2019-05-14 Jamey Hicks <jamey.hicks@gmail.com>
249 * objcopy.c: Add new option --verilog-data-width. Use it to set
250 the value of VerilogDataWidth.
251 * doc/binutils.texi: Document the new option.
252 * testsuite/binutils-all/objcopy.exp: Run tests of new option.
253 * testsuite/binutils-all/verilog-1.hex: New file.
254 * testsuite/binutils-all/verilog-2.hex: New file.
255 * testsuite/binutils-all/verilog-4.hex: New file.
256 * testsuite/binutils-all/verilog-8.hex: New file.
257 * NEWS: Mention the new feature.
259 2019-05-10 Alan Modra <amodra@gmail.com>
261 * testsuite/binutils-all/objdump.exp (test_objdump_disas_limited),
262 (test_objdump_content_limited): Add text arg, use in place of .text.
263 (bintest_signed.o): Call get_standard_section_names for name of
266 2019-05-08 Faraz Shahbazker <fshahbazker@wavecomp.com>
268 * objdump.c (sign_extend_address): New function.
269 (dump_bfd): Sign-extend user-specified start/stop addresses
270 for targets that need it.
271 * testsuite/binutils-all/objdump.exp: Add tests for objdump
272 with start and stop addresses in higher address ranges.
274 2019-05-01 Matthew Malcomson <matthew.malcomson@arm.com>
276 * testsuite/binutils-all/objdump.exp: Correct executable
278 * testsuite/binutils-all/compress.exp: Likewise.
280 2019-05-01 Nick Clifton <nickc@redhat.com>
283 * nm.c: (print_format): New variable.
284 (value_format_32bit, value_format_64bit): Delete.
285 (set_print_radix): Remove code to alter value_format strings.
286 (set_output_format): Record chosen format in print_format.
287 (get_print_format): New function - constructs a printf formatting
288 string according to the requirements of size, radix, and output
290 (print_value): Use get_print_format.
291 * testsuite/binutils-all/nm.exp: Add tests of "nm --format=posix"
294 2019-04-30 Alan Modra <amodra@gmail.com>
296 * wrstabs.c (stab_start_class_type): Add assert to work around
299 2019-04-24 Nick Clifton <nickc@redhat.com>
301 * objcopy.c (strip_main): Do not enable note merging by default if
302 just stripping debug or dwo information.
303 * doc/binutils.texi (strip): Update documentation.
305 2019-04-23 Nick Clifton <nickc@redhat.com>
307 * README-how-to-make-a-release: Add note to update the symbolic
308 link from "docs" to "docs-2.x" on the sourceware website.
310 2019-04-16 Alan Modra <amodra@gmail.com>
312 * testsuite/binutils-all/copy-2.d: Don't run for ns32k-*-*.
313 * testsuite/binutils-all/copy-3.d: Likewise.
315 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
317 * readelf.c (arm_attr_tag_CPU_arch): Add entry for Armv8.1-M Mainline.
319 2019-04-08 H.J. Lu <hongjiu.lu@intel.com>
321 * readelf.c (decode_x86_isa): Handle
322 GNU_PROPERTY_X86_ISA_1_AVX512_BF16.
323 * testsuite/binutils-all/i386/pr21231b.d: Updated.
324 * testsuite/binutils-all/x86-64/pr21231b.d: Likewise.
326 2019-04-08 H.J. Lu <hongjiu.lu@intel.com>
328 * testsuite/binutils-all/nm.exp: Count i386-moss as ELF.
330 2019-03-26 Tamar Christina <tamar.christina@arm.com>
332 * testsuite/binutils-all/aarch64/in-order-all.d: Update.
333 * testsuite/binutils-all/aarch64/in-order.d: Likewise.
334 * testsuite/binutils-all/aarch64/out-of-order-all.d: Likewise.
335 * testsuite/binutils-all/aarch64/out-of-order.d: Likewise.
336 * testsuite/binutils-all/aarch64/out-of-order.s: Likewise.
337 * testsuite/binutils-all/arm/in-order-all.d: Likewise.
338 * testsuite/binutils-all/arm/in-order.d: Likewise.
339 * testsuite/binutils-all/arm/out-of-order-all.d: Likewise.
340 * testsuite/binutils-all/arm/out-of-order.d: Likewise.
341 * testsuite/binutils-all/arm/out-of-order.s: Likewise.
343 2019-03-26 Nick Clifton <nickc@redhat.com>
345 * MAINTAINERS: Take over Dave Brolley's maintainerships for FR30,
348 2019-03-26 Alan Modra <amodra@gmail.com>
350 * objdump.c (dump_relocs_in_section): Warning fix.
352 2019-03-25 Tamar Christina <tamar.christina@arm.com>
354 * testsuite/binutils-all/arm/in-order-all.d: New test.
355 * testsuite/binutils-all/arm/in-order.d: New test.
356 * testsuite/binutils-all/arm/objdump.exp: Support .d tests.
357 * testsuite/binutils-all/arm/out-of-order-all.d: New test.
358 * testsuite/binutils-all/arm/out-of-order.T: New test.
359 * testsuite/binutils-all/arm/out-of-order.d: New test.
360 * testsuite/binutils-all/arm/out-of-order.s: New test.
363 2019-03-25 Tamar Christina <tamar.christina@arm.com>
365 * testsuite/binutils-all/aarch64/in-order-all.d: New test.
366 * testsuite/binutils-all/aarch64/out-of-order-all.d: New test.
367 * testsuite/binutils-all/aarch64/out-of-order.d:
369 2019-03-25 Tamar Christina <tamar.christina@arm.com>
371 * testsuite/binutils-all/aarch64/in-order.d: New test.
372 * testsuite/binutils-all/aarch64/out-of-order.d: Disassemble data as
375 2019-03-25 Tamar Christina <tamar.christina@arm.com>
377 * objdump.c (disassemble_bytes): Pass stop_offset.
378 * testsuite/binutils-all/aarch64/out-of-order.T: New test.
379 * testsuite/binutils-all/aarch64/out-of-order.d: New test.
380 * testsuite/binutils-all/aarch64/out-of-order.s: New test.
382 2019-03-19 Nick Clifton <nickc@redhat.com>
385 * objdump.c (load_specific_debug_section): Check that the amount
386 of memory to be allocated matches the size of the section.
388 2019-03-13 Sudakshina Das <sudi.das@arm.com>
390 * readelf.c (get_aarch64_dynamic_type): Add case for
392 (dynamic_section_aarch64_val): Likewise.
394 2019-03-13 Sudakshina Das <sudi.das@arm.com>
395 Szabolcs Nagy <szabolcs.nagy@arm.com>
397 * readelf.c (get_aarch64_dynamic_type): New.
398 (get_dynamic_type): Use above for EM_AARCH64.
399 (dynamic_section_aarch64_val): New.
400 (process_dynamic_section): Use above for EM_AARCH64.
402 2019-03-13 Sudakshina Das <sudi.das@arm.com>
404 * readelf.c (decode_aarch64_feature_1_and): New.
405 (print_gnu_property_note): Add case for AArch64 gnu notes.
407 2019-03-12 Alan Modra <amodra@gmail.com>
409 * objdump.c (load_specific_debug_section): Don't compare section
410 size against file size.
411 (dump_relocs_in_section): Don't compare reloc size against file size.
412 Print "failed to read relocs" on bfd_get_reloc_upper_bound error.
414 2019-03-05 Nick Clifton <nickc@redhat.com>
417 * doc/binutils.texi (ar cmdline): Fix spelling mistake.
419 2019-03-05 Nick Clifton <nickc@redhat.com>
421 * po/sv.po: Updated Swedish translation.
423 2019-03-05 Matthew Malcomson <matthew.malcomson@arm.com>
426 * testsuite/lib/binutils-common.exp (run_dump_test): Replace a use
427 of "lmap" with a "foreach" loop.
429 2019-03-04 Nick Clifton <nickc@redhat.com>
432 * objcopy.c (copy_archive): Do not copy thin archives.
434 2019-02-27 Matthew Malcomson <matthew.malcomson@arm.com>
436 * testsuite/lib/binutils-common.exp: Allow multiple "as" lines.
438 2019-02-25 Nick Clifton <nickc@redhat.com>
440 * objdump.c (sym_ok): New function.
441 (find_symbol_for_address): Use new function.
442 (disassemble_section): Compare sections by name, not pointer.
443 (dump_dwarf): Move code to initialise byte_get pointer and iterate
444 over separate debug files from here to ...
445 (dump_bfd): ... here. Add parameter indicating that a separate
446 debug info file is being dumped. For main file, pull in the
447 symbol tables from all separate debug info files.
448 (display_object): Update call to dump_bfd.
449 * doc/binutils.texi: Document extened behaviour of the
450 --dwarf=follow-links option.
451 * NEWS: Mention this new feature.
452 * testsuite/binutils-all/objdump.WK2: Update expected output.
453 * testsuite/binutils-all/objdump.exp (test_follow_debuglink): Add
454 options and dump file parameters.
456 * testsuite/binutils-all/objdump.WK3: New file.
457 * testsuite/binutils-all/readelf.exp: Change expected output for
459 * testsuite/binutils-all/readelf.wKis: New file.
461 2019-02-22 Nick Clifton <nickc@redhat.com>
464 * dwarf.h (struct separate_info): New structure for containing
465 information on separate debug info files.
466 * dwarf.c (struct dwo_info): New structure for containing dwo
468 (first_dwo_info): Chain of dwo_info structures.
469 (first_separate_file): Chain of separate_info structures.
470 (separate_debug_file, separate_debug_filename): Delete.
471 (fetch_alt_indirect_string): Scan all separate debug info files
472 for the requested string.
473 (add_dwo_info): New function.
474 (add_dwo_name): New function.
475 (add_dwo_dir): New function.
476 (add_dwo_id: New function.
477 (free_dwo_info): New function.
478 (read_and_display_attr_value): Store DWO data using the new
480 (load_debug_section_with_follow): If necessary, scan the list of
481 separate debug info files for the requested section.
482 (add_separate_debug_file): New function.
483 (load_separate_debug_info): Call add_separate_debug_file to store
484 the information on the newly loaded file.
485 (load_dwo_file): Likewise.
486 (load_separate_debif_file): Rename to load_separate_debug_files.
487 Change return type to boolean. If following links then attempt to
488 load all separate debug info files, not just the first one.
489 (free_debug_memory): Release memory in dwo_info and separate_info
491 * objdump.c (dump_dwarf): Iterate over all loaded debg info files.
492 * readelf.c (process_object): Likewise.
493 * doc/debug.options.texi: Update descriptions of links and
494 follow-links options.
495 * testsuite/binutils-all/objdump.WK2: Update expected output.
496 * testsuite/binutils-all/readelf.k2: Likewise.
497 * NEWS: Announce the new feature.
499 2019-02-21 Nick Clifton <nickc@redhat.com>
502 * unwind-ia64.c: Include sysdep.h.
503 (unw_decode_x1): Check current pointer against end pointer before
505 (unw_decode_x2): Likewise.
506 (unw_decode_x3): Likewise.
507 (unw_decode_x4): Likewise.
508 (unw_decode_r2): Likewise.
509 (unw_decode_p2_p5): Likewise.
510 (unw_decode_p7_p10): Likewise.
511 (unw_decode): Likewise.
513 2019-02-20 Nick Clifton <nickc@redhat.com>
516 * readelf.c (print_stapsdt_note): Harden against corrupt notes.
519 * unwind-ia64.c (unw_decode_uleb128): Add end parameter, use it to
520 prevent walking off the end of the buffer.
521 (unw_decode_x1): Add end paramter, pass it to unw_decode_uleb128.
522 (unw_decode_x2): Likewise.
523 (unw_decode_x3): Likewise.
524 (unw_decode_x4): Likewise.
525 (unw_decode_r2): Pass the end parameter to unw_decode_uleb128.
526 (unw_decode_r3): Likewise.
527 (unw_decode_p7_p10): Likewise.
528 (unw_decode_b2): Likewise.
529 (unw_decode_b3_x4): Likewise.
532 * readelf.c (process_mips_specific): Check for an options section
533 that is too small to even contain a single option.
536 * readelf.c (print_ia64_vms_note): Harden against corrupt notes.
538 2019-02-20 Alan Modra <amodra@gmail.com>
542 * readelf.c (get_data): Avoid possibility of overflow when
543 checking for a read that may extend past end of file.
544 (process_program_headers): Likewise.
546 2019-02-20 Alan Modra <amodra@gmail.com>
549 * objdump.c (dump_bfd_private_header): Print warning if
550 bfd_print_private_bfd_data returns false.
552 2019-02-12 Nick Clifton <nickc@redhat.com>
555 * README-how-to-make-a-release: Use git clean to delete spurious
556 files from the local source repository.
558 2019-02-08 Andrew Burgess <andrew.burgess@embecosm.com>
560 * size.c (berkeley_format): Delete.
561 (enum output_format): New enum.
562 (selected_output_format): New variable.
563 (usage): Update to mention GNU format.
564 (main): Update to extract options, and select format as needed.
565 Handle GNU format where needed.
566 (berkeley_sum): Renamed to...
567 (berkeley_or_gnu_sum): ...this, and updated to handle both formats.
568 (berkeley_format): Renamed to...
569 (berkeley_or_gnu_format): ...this, and updated to handle both
571 (print_sizes): Handle GNU format.
572 * doc/binutils.texi (size): Document new GNU format.
573 * testsuite/binutils-all/size.exp: Add test of extended
575 * NEWS: Mention new functionality.
577 2019-02-08 Andrew Burgess <andrew.burgess@embecosm.com>
579 * doc/binutils.texi (size): Update example output for Berkeley
582 2019-02-07 Nick Clifton <nickc@redhat.com>
584 * README-how-to-make-a-release: Add a note about updating the
585 obsolete targets in the bfd/config.bfd file.
587 2019-02-04 Nick Clifton <nickc@redhat.com>
589 * README-how-to-make-a-release: Add more notes on making a release.
591 2019-01-25 Nick Clifton <nickc@redhat.com>
594 * readelf.c (process_notes_at): Prevent an illegal memory access
595 when the note's namesize is zero.
596 (decode_tic6x_unwind_bytecode): Add code to handle the case where
597 no registers are specified in a frame pop instruction.
599 2019-01-25 Nick Clifton <nickc@redhat.com>
601 * po/bg.po: Updated Bulgarian translation.
603 2019-01-23 Nick Clifton <nickc@redhat.com>
605 * po/fr.po: Updated French translation.
606 * po/pt.po: Updated Portuguese translation.
608 2019-01-21 Nick Clifton <nickc@redhat.com>
610 * po/uk.po: Updated Ukranian translation.
612 2019-01-19 Nick Clifton <nickc@redhat.com>
614 * configure: Regenerate.
615 * binutils/po/binutils.pot.
617 * README-how-to-make-a-release: Update description on how to make
620 2018-06-24 Nick Clifton <nickc@redhat.com>
624 2019-01-17 Nick Clifton <nickc@redhat.com>
626 * objdump.c (disassemble_section): When disassembling from a
627 symbol only stop at the next symbol if the original symbol was not
628 a function symbol. Otherwise continue disassembling until a new
630 * testsuite/binutils-all/objdump.exp: Add tests of extended
632 * testsuite/binutils-all/disasm.s: New test source file.
634 2019-01-16 Kito Cheng <kito@andestech.com>
635 Nelson Chu <nelson@andestech.com>
637 * readelf.c (get_riscv_section_type_name): New function.
638 (get_section_type_name): Add handler for RISC-V.
639 (riscv_attr_tag_t): Declare.
640 (riscv_attr_tag): New.
641 (display_riscv_attribute): New function.
642 (process_attributes): Add handler for RISC-V.
643 * testsuite/binutils-all/strip-3.d: Remove .riscv.attribute
646 2019-01-10 Nick Clifton <nickc@redhat.com>
649 * objdump.c (sanitize_string): New function. Removes control
650 characters from symbol names.
651 (dump_section_header): Use new function.
652 (objdump_print_symname): Likewise.
653 (objdump_print_addr_with_sym): Likewise.
654 (show_line): Likewise.
655 (disassemble_bytes): Likewise.
656 (disassemble_section): Likewise.
657 (load_specific_debug_section): Likewise.
658 (read_section_stabs): Likewise.
659 (print_section_stabs): Likewise.
660 (dump_section): Likewise.
661 (dump_reloc_set): Likewise.
662 (dump_relocs_in_section): Likewise.
663 (dump_bfd): Likewise.
664 (display_any_bfd): Likewise.
666 2019-01-09 Nick Clifton <nickc@redhat.com>
669 * readelf.c (process_archive): Use arch.file_name in error
670 messages until the qualified name is available.
672 2019-01-09 Andrew Paprocki <andrew@ishiboo.com>
674 * configure: Regenerate.
676 2019-01-09 Alan Modra <amodra@gmail.com>
678 * testsuite/binutils-all/cxxfilt.exp: Pass --no-strip-underscores
679 unconditionally to tests needing the option rather than via a
682 2019-01-08 Nick Clifton <nickc@redhat.com>
685 * cxxfilt.c (hp_symbol_characters): Delete.
686 (main): Remove depcreated demangling styles.
687 * stabs.c (parse_stab_argtypes): Remove support for old gnu v2
689 * testsuite/binutils-all/cxxfilt.exp: Use the
690 --no-strip-underscore option for targets that do prefix their
691 symbols with underscores.
692 Update tests to eliminate those that use gnu v2 encoding.
694 2019-01-08 Tamar Christina <tamar.christina@arm.com>
697 * testsuite/binutils-all/copy-6.d: New test.
698 * testsuite/binutils-all/objcopy.exp: Use it.
700 2019-01-08 Alan Modra <amodra@gmail.com>
702 * testsuite/lib/binutils-common.exp (run_dump_test): Don't prepend
703 $srcdir/$subdir to source file name if it starts with "./".
705 2019-01-05 Yoshinori Sato <ysato@users.sourceforge.jp>
707 * readelf.c (get_machine_flags): Add RXv3 output.
709 2019-01-04 Nick Clifton <nickc@redhat.com>
712 * objdump.c (load_specific_debug_section): Check for integer
713 overflow before attempting to allocate contents.
715 2019-01-04 Nick Clifton <nickc@redhat.com>
718 * objcopy.c (copy_object): Free dhandle after writing out the
720 * objdump.c (dump_bfd): Free dhandle after printing out the debug
724 2019-01-01 Alan Modra <amodra@gmail.com>
726 Update year range in copyright notice of all files.
728 For older changes see ChangeLog-2018
730 Copyright (C) 2019 Free Software Foundation, Inc.
732 Copying and distribution of this file, with or without modification,
733 are permitted in any medium without royalty provided the copyright
734 notice and this notice are preserved.
740 version-control: never