1 Wed Oct 19 14:09:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3 * Makefile.in (check): Add a dummy else clause to the if
6 * objcopy.c (copy_object): Revert yesterday's change.
7 * binutils.texi, objcopy.1: Remove special mention of --set-start
8 and `binary' output format.
10 Tue Oct 18 11:12:01 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
12 * objcopy.c (copy_object): If the output file format is `binary',
13 and the start address was not set using --set-start, default the
14 start address to zero. This hack is because the `binary' output
15 file format uses the start address to set the virtual address of
16 the first byte in the file.
17 * binutils.texi, objcopy.1: Add some notes on generating S-records
20 * nm.c (print_symdef_entry): Call print_symname to print the
21 symbol name, so that --demangle works.
23 * Makefile.in (mostlyclean): Remove tmpdir.
25 * objcopy.c (struct section_list): Add fields used, adjust, val.
26 (adjust_start, set_start_set, set_start): New static variables.
27 (adjust_section_vma, adjust_sections): New static variables.
28 (copy_options): Add --adjust-start, --adjust-vma,
29 --adjust-section-vma, --adjust-warnings, --no-adjust-warnings,
31 (parse_vma): New static function.
32 (copy_usage): Mention new options.
33 (copy_object): Handle --set-start and --adjust-start.
34 (setup_section): Correct type of last argument to PTR. Set used
35 field if section is removed. Handle --adjust-vma and
37 (copy_section): Correct type of last argument to PTR.
38 (mark_symbols_used_in_relocations): Likewise.
39 (strip_main): Clear used field when handling -R.
40 (copy_main): Handle new options.
41 * binutils.texi (objcopy): Document new options.
42 * objcopy.1: Document new options.
44 Fri Oct 14 14:38:13 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
46 * configure.in (configdirs): Remove definition--testsuite is no
48 * Makefile.in (testsuite): Remove target.
49 (site.exp): New target.
51 (clean, distclean): Don't recur into testsuite directory.
53 Thu Oct 13 19:24:09 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
55 * Makefile.in (VERSION): Updated to 2.5.
56 * Version 2.5 released.
58 Tue Oct 11 15:26:42 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
60 * Makefile.in (sysdump.o): Depends upon sysroff.c.
62 Mon Oct 10 13:50:30 1994 J.T. Conklin (jtc@rtl.cygnus.com)
64 * nlmconv.c (link_inputs): Pass -Ur flag to ld so that the
65 ctor/dtor tables needed by C++ programs are built.
67 Sun Oct 9 18:04:00 1994 Jim Wilson (wilson@sphagnum.cygnus.com)
69 * Makefile.in (srconv.o): Add dependence on sysroff.c.
71 Tue Oct 4 12:19:51 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
73 * configure.in: Use ${config_shell} when running config.bfd.
75 * Makefile.in (sysroff.h): Split target away from sysroff.c.
76 (srconv.o, sysdump.o): New targets.
77 (srconv, sysdump): Don't depend upon sysroff.c.
79 Wed Sep 28 13:04:34 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
81 * Makefile.in (arparse.c): Don't ignore errors from mv.
82 (sysinfo.c): Likewise. Also, depend upon arparse.c, to prevent a
83 parallel make from trying to build both arparse.c and sysinfo.c
85 (nlmheader.c): Similar change.
86 (arparse.h): Separate target from arparse.c, so that a parallel
87 make does not try to build both at once. Depend upon arparse.c.
88 (sysinfo.h): Similar change.
90 * objdump.c (disassemble_data): Pass the reloc buffer to free, not
91 the pointer used to loop over the relocs.
93 Sat Sep 24 16:16:57 1994 Stan Shebs (shebs@andros.cygnus.com)
95 * objdump.c (disassemble_data): Cast result of xmalloc.
97 Wed Sep 21 19:30:35 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
99 * objdump.c (sorted_syms, sorted_symcount): New global variables.
100 (objdump_print_address): Use sorted_syms and sorted_symcount
101 instead of syms and symcount.
102 (disassemble_data): Don't bother to get the relocs before looping
103 over the sections. Before filtering and sorting the symbol table,
104 copy it into sorted_syms.
106 Fri Sep 16 11:27:39 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
108 * objdump.c (struct objdump_disasm_info): Add field require_sec.
109 (objdump_print_address): If aux->require_sec, require that the
110 symbol be in aux->sec even if HAS_RELOC is not set. If we can't
111 find a smaller symbol in the right section, look for a larger one.
112 (disassemble_data): Set aux.require_sec around the
113 objdump_print_address call for the instruction address.
115 Thu Sep 15 21:43:17 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
117 * ar.c: Call xexit rather than exit.
118 (output_filename, output_file, output_bfd): New static variables.
119 (remove_output): New static function.
120 (main): Call xatexit (remove_output). Call xexit rather than
122 (extract_file): Set output_filename and output_file while output
124 (write_archive): Likewise, but use output_bfd, not output_file.
125 * arsup.c: Include libiberty.h. Call xexit rather than exit.
126 * bucomm.c: Likewise.
128 * objdump.c (disassemble_all): New global variable.
129 (usage): Document --disassemble-all.
130 (long_options): Add disassemble-all as a synonym for -D.
131 (compare_symbols): Make pointers const.
132 (compare_relocs): New static function.
133 (disassemble_data): Rename disassemble to disassemble_fn to avoid
134 shadowing. If dump_reloc_info, print relocs along with
135 disassembly. Skip sections which are not SEC_CODE unless
136 disassemble_all or only is set.
137 (display_bfd): Don't call dump_relocs if disassemble is set.
138 (main): Accept and handle -D.
139 * binutils.texi: Document -D/--disassemble-all.
140 * objdump.1: Likewise.
142 Wed Sep 14 12:19:07 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
144 * objdump.c (disassemble_data): Initialize prevline to 0. Make
145 prev_function non const. Copy functionname into an malloc buffer
146 when setting prev_function, instead of assuming that the string
149 * nm.c: Include libiberty.h.
150 (sort_by_size): New static variable.
151 (long_options): Add --size-sort.
152 (usage): Mention --size-sort.
153 (numeric_forward): Make static. Change from void * to PTR.
154 (numeric_reverse): Likewise.
155 (non_numeric_forward, non_numeric_reverse): Likewise.
156 (sorters): Change declaration from void * to PTR.
157 (size_forward, sort_symbol_by_size): New static functions.
158 (display_rel_file): Handle sort_by_size.
159 (filter_symbols): If sort_by_size, discard absolute and undefined
161 * binutils.texi (nm): Document --size-sort.
162 * nm.1: Document --size-sort.
164 Tue Sep 13 21:06:06 1994 Jeff Law (law@snake.cs.utah.edu)
166 * objcopy.c (copy_main): Initialize input_filename and
167 output_filename to NULL.
169 Tue Sep 13 14:17:24 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
171 * Makefile.in (version.o): Depend upon Makefile, so that version.o
172 gets rebuilt when make variable VERSION is changed.
174 * objdump.c (dump_section_header): Print the SEC_NEVER_LOAD flag.
176 Wed Aug 24 12:40:09 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
178 * configure.in: Change i[34]86 to i[345]86.
180 Tue Aug 23 11:00:40 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
182 * ar.c (ranlib_touch): Don't update the archive map if there isn't
185 Mon Aug 22 16:02:18 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
187 * ar.c: Include libiberty.h.
188 (inarch): Remove variable.
189 (map_over_members): Make static. Add arch argument, and use it
190 instead of inarch. Change all callers.
191 (main): Treat --version as -v. Accept -t argument. Accept any
192 number of archive arguments. Catch and use open_inarch return
193 value, rather than using inarch.
194 (open_inarch): Return newly opened BFD, rather than using inarch.
195 (do_quick_append): Make archive_filename const.
196 (write_archive): Add iarch argument, and use it instead of inarch.
198 (delete_members, move_members, replace_members): Likewise.
199 (ranlib_only): Don't exit on success. Catch and use open_inarch
201 (ranlib_touch): New function.
202 * arsup.h (map_over_members): Don't declare.
203 (ar_end, ar_extract): Declare.
204 (open_inarch): Change return value in declaration to bfd *.
205 * arsup.c (map_over_list): Make static. Always pass two arguments
206 to function. Add arch argument, and use it instead of inarch.
208 (ar_directory_doer): Make static. Add ignored second argument.
210 (ar_directory): Use open_inarch return value rather than inarch.
211 (ar_addlib_doer): Make static.
212 (ar_addlib): Use open_inarch return value rather than inarch.
213 (ar_extract): Remove unused local variable abfd.
215 Thu Aug 11 14:55:57 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
217 Add support for removing named sections to objcopy and strip.
218 * objcopy.c (struct section_list): Define.
219 (remove_sections): New static variable.
220 (strip_options, copy_options): Add remove-section.
221 (copy_usage, strip_usage): Mention -R and --remove-section.
222 (setup_section): If section is in remove_sections list, ignore it.
223 (copy_section): Likewise.
224 (strip_main, copy_main): Handle -R.
225 * binutils.texi, objcopy.1, strip.1: Document new options.
227 Wed Aug 10 10:19:55 1994 Stan Shebs (shebs@andros.cygnus.com)
229 * nlmconv.c (powerpc_mangle_relocs): Rename symvalue to sym_value,
230 so as not to conflict with the symvalue typedef in bfd.h.
232 Mon Aug 1 13:19:09 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
234 * nlmheader.y: Per current NetWare docs, accept a revision number
235 of 0 and treat a revision number greater than 26 as 0.
237 Mon Jul 25 12:58:36 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
239 * objdump.c (objdump_print_address): Correct handling of end of
240 symbols when looking for next symbol with a different value.
242 Fri Jul 22 16:48:34 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
244 * nm.c (numeric_forward): Treat undefined symbols as "less than"
245 defined symbols with zero values. If numeric values are equal, or
246 both symbols are undefined, sort alphabetically. Don't assume
247 that the difference of two bfd_vma values will truncate to "int"
248 and still have the same sign.
249 (numeric_reverse): Call numeric_forward and negate the result.
250 (print_symbol_info_bsd): For undefined symbols, print leading
251 spaces equivalent to the width of a printed bfd_vma, rather than
252 assuming that 8 will look right.
254 Fri Jul 22 10:36:50 1994 Steve Chamberlain (sac@jonny.cygnus.com)
256 * coffgrok.c (doit): Zero all fields of new structure.
257 * srconv.c (sysroff_swap_*_out): Remove redundant trailing arg.
258 * sysinfo.y: Generate sysroff_swap_*_out without requiring extra
261 Fri Jul 22 10:09:53 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
263 * nlmheader.y: Make "stack" and "stacksize" synonyms in the lexer
264 rather than the parser.
266 Thu Jul 21 10:25:09 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
268 * config/mh-alphaosf, config/mh-apollo68v, config/mh-delta88:
271 Sat Jul 16 22:34:39 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
273 * objdump.c (slurp_dynamic_symtab): Try to get the dynamic symbols
274 even if the bfd is not marked DYNAMIC. ELF executables are not
275 marked DYNAMIC, but do have dynamic symbols.
277 Fri Jul 15 01:41:35 1994 Steve Chamberlain (sac@jonny.cygnus.com)
279 * coffgrok.c (do_where): Make data with no type 'int'.
280 (do_define): Keep info on source file of a symbol.
281 * coffgrok.h (coff_symbol): New field.
282 * srconv.c (PROGRAM_VERSION): Now 1.3
283 (wr_rl): Use external ref number for symbol.
284 (wr_dus): Only keep one source file per debug unit.
285 (wr_dln): Always emit line numbers for first source file,
286 (wr_globals): Emit globals in the du of their owning source file.
288 Mon Jul 11 15:59:03 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
290 * nlmheader.y: Null terminate var_hdr->threadName.
292 Fri Jul 8 17:33:22 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
294 * Makefile.in (syslex.o, sysinfo.o): Permit C source files to be
295 in $(srcdir), as they will be for FSF releases.
297 Wed Jul 6 01:13:14 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
299 * nlmconv.c (setup_sections): Preserve existing section flags when
300 copying in flags from a new section.
302 Tue Jul 5 15:56:01 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
304 * objcopy.c: Include libiberty.h.
305 (copy_file): If output_target is NULL, set it to the target of the
308 Wed Jun 29 17:17:14 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
310 * nlmconv.c (link_inputs): Fixed memory allocation bug.
312 Thu Jun 23 12:52:46 1994 David J. Mackenzie (djm@rtl.cygnus.com)
314 * configure.in: Change --with-targets to --enable-targets.
316 Tue Jun 21 12:53:21 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
318 * Makefile.in (sysinfo): Does not depend upon $(ADDL_LIBS).
320 * nlmconv.c (powerpc_build_stubs): Don't generate the PowerPC
321 NetWare custom header; no longer needed.
322 (powerpc_mangle_relocs): Convert relocs against the uninitialized
323 data section into relocs against the data section.
325 * configure.in: Set nlmconv_defs to -DNLMCONV_cputype for all the
326 netware targets. Write it into Makefile as NLMCONV_DEFS.
327 * Makefile.in (nlmconv.o): Pass $(NLMCONV_DEFS) to $(CC).
328 * nlmconv.c: Only compile code for specific CPU types if
329 NLMCONV_cputype is defined.
331 * nlmconv.c (main): Change uses of bfd_abs_section, etc., to use
332 bfd_abs_section_ptr or bfd_is_abs_section, etc.
333 (i386_mangle_relocs, alpha_mangle_relocs): Likewise.
334 (powerpc_build_stubs): Likewise.
335 * nm.c (filter_symbols, print_symbols): Likewise.
336 * objcopy.c (filter_symbols): Likewise.
337 (mark_symbols_used_in_relocations): Likewise.
338 * objdump.c (remove_useless_symbols, dump_relocs): Likewise.
339 * size.c (sysv_internal_printer): Likewise.
341 Mon Jun 20 16:43:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
343 * Makefile.in (MANPAGES): Remove $(DEMANGLER_PROG).
344 (install): Install it explicitly, from build dir, not srcdir.
346 Mon Jun 20 16:29:54 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
348 * objdump.c: Don't include elf/internal.h.
349 (bfd_elf_find_section): Don't declare.
350 (read_section_stabs): No special handling for ELF. Always read
353 Thu Jun 16 17:25:20 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
355 * configure.in: Set UNDERSCORE in Makefile based on result of
356 invoking config.bfd with a second argument of ``_''.
357 * Makefile.in (underscore.c): Depend upon Makefile. Don't try to
358 run $(CC) and $(NM), just use $(UNDERSCORE). Create via temporary
360 (demangle.o): Remove target.
361 ($(NM_PROG)): Don't depend upon demangle.o, and don't link against
362 demangle.o. It's in libiberty anyhow.
363 (cplus-dem.o): Don't depend upon demangle.o.
364 * binutils.texi: Mention -n and --no-strip-underscores arguments
367 Wed Jun 15 12:10:31 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
369 * nm.c (long_options): Add --no-demangle to turn off --demangle,
370 and --no-cplus for Linux compatibility.
371 (usage): Mention --no-demangle.
372 * binutils.texi: Document --no-demangle.
374 Fri Jun 10 15:41:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
376 * nm.c: HOST_64_BIT was renamed to BFD_HOST_64_BIT.
378 * objcopy.c (copy_archive): Make the temporary directory in the
379 same directory as the output BFD, since we may not have write
380 permission on the current directory. Set the permissions of the
381 new directory to 0700, not 0777.
383 Mon Jun 6 21:36:43 1994 D. V. Henkel-Wallace (gumby@cygnus.com)
385 * configure.in: if this is an rs6000 (and we're not building for
386 any other bfd targets) then build only nm (collect needs it on
389 * Makefile.in: define TOOL_PROGS which the list of programes to
390 install in $tooldir -- replaces a hard-coded list.
392 Fri Jun 3 10:59:18 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
394 * objdump.c (display_target_list): Remove unused local ok.
396 Thu May 26 18:05:52 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
398 * config/mh-alphaosf (CFLAGS): Don't specify both -g and -O;
399 they're not compatible under native cc. Use -O1 instead.
401 * Makefile.in (VERSION): Updated to cygnus-2.4.1.
403 Changes from binutils-2.4 net release:
405 * Makefile.in (MANPAGES): Use $(DEMANGLER_PROG).
406 ($(DEMANGLER_PROG).1): Build from cxxfilt.man, using sed.
407 * cxxfilt.man: Renamed from c++filt.1, replaced "c++filt" with
408 magic token to be replaced by sed.
410 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
412 * configure.bat: update for latest makefile.in
414 Fri May 13 23:25:13 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
416 * bucomm.c: Check ANSI_PROTOTYPES rather than __STDC__.
418 Tue May 10 18:22:06 1994 Jason Molenda (crash@sendai.cygnus.com)
420 * objcopy.c (copy_section): Set section size correctly if using
423 Sat May 7 16:49:36 1994 Steve Chamberlain (sac@cygnus.com)
425 * Makefile.in: Add rule for sysinfo.h
427 Fri May 6 12:18:33 1994 Steve Chamberlain (sac@cygnus.com)
429 * Makefile.in (SRCONV_PROG): Define.
430 (PROGS): Use $(SRCONV_PROG) too.
432 Thu May 5 19:41:43 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
434 * Makefile.in (DISTSTUFF): Add sysinfo.c, syslex.c, in case
435 someone configures with `targets=all'.
436 (distclean): Remove y.*.
437 (syslex.o): Depend on sysinfo.h.
438 (sysinfo.c): Rename y.tab.h to sysinfo.h.
439 (install-info): Don't try to install into $(infodir)/$(srcdir).
440 * syslex.l: Include sysinfo.h, not y.tab.h.
442 Thu May 5 11:50:55 1994 Ken Raeburn (raeburn@kr-pc.cygnus.com)
444 * syslex.l (yywrap): Define as function if not defined as a macro.
446 * Makefile.in (objdump.o): Deleted special rule.
447 * configure.in: Don't bother building ARCHDEFS variable for
449 * objdump.c (ARCH_*): Deleted handling.
450 (disassemble_data): Call `disassembler' from opcodes library.
452 Thu May 5 13:28:42 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
454 * Makefile.in (install): Correct handling of $(tooldir) and
455 $(bindir) being on different devices.
457 Fri Apr 29 09:50:38 1994 Steve Chamberlain (sac@cygnus.com)
459 * sysdump.c (h8300, sh): Add declarations.
461 Wed Apr 27 11:25:18 1994 Steve Chamberlain (sac@cygnus.com)
463 * Makefile.in (syslex, sysinfo): Use CC_FOR_BUILD.
464 * coffdump.c, coffgroc.c, coffgrog.h, srconv.c, sysdump.c,
465 sysroff.info: Major changes.
467 Tue Apr 26 18:18:24 1994 Stan Shebs (shebs@andros.cygnus.com)
469 * objdump.c (print_section_stabs): Indicate the stab header symbol
470 more clearly, print numbers of unrecognized stab n_type values.
472 Tue Apr 26 16:22:55 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
474 * nlmconv.c (copy_sections): Copy arelent pointers, not arelents.
476 Mon Apr 25 16:14:32 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
478 * Makefile.in (distclean): Remove $(PROGS) and underscore.c.
480 Fri Apr 22 11:14:19 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
482 * nlmconv.c (setup_sections): Remove special handling of .reginfo
484 (copy_sections): Likewise.
485 (alpha_mangle_relocs): Use bfd_ecoff_get_gp_value rather than the
486 special ECOFF .reginfo section.
488 * objcopy.c (copy_object): Call bfd_copy_private_bfd_data after
489 copying everything else, to let it fiddle with the file in its
492 * objdump.c: Include libiberty.h.
493 (display_target_list): If a format fails, just go on to the next
494 one. Check return value of bfd_set_format.
495 (display_info_table): Likewise. Don't increment loop variable in
496 for loop test, since that skips the first element.
497 (display_target_tables): Rewrite loop for clarity. Ensure that it
498 always prints at least one element.
500 * nlmconv.c (main): Use CyGnUsEx rather than CyGnUsSeCs for
501 sections header. Rename from cygnus_sections to cygnus_ext.
503 Thu Apr 21 12:12:26 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
505 * objdump.c (_DUMMY_NAME_): Don't define.
506 (display_target_list): Use tmpnam to get a file name rather than
507 using _DUMMY_NAME_. Unlink it when done.
508 (display_info_table): Likewise.
510 * nlmconv.c (secsec): New static variable.
511 (main): Create .nlmsections section in output BFD. Store
512 information about it in sections header.
513 (setup_sections): Allocate space in sections header.
514 (copy_sections): Copy zero sized sections. Put information about
515 each section in the sections header.
517 Wed Apr 20 14:34:51 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
519 * nlmconv.c (powerpc_build_stubs): Take new outbfd argument.
520 Change caller. Create custom header for new PowerPC NetWare
523 * Makefile.in (nlmheader.o, nlmconv.o): Update dependencies.
524 * nlmconv.c: Include bfd.h and libiberty.h with "", not <>.
525 * nlmheader.y: Include bfd.h with "", not <>.
527 Wed Apr 13 10:52:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
529 * objdump.c: Do an ifdef on __GO32__, not unix.
531 Wed Apr 6 21:54:49 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
533 Added -D (--dynamic) option to nm and -T (--dynamic-syms) and -R
534 (--dynamic-reloc) arguments to objdump.
535 * nm.c (dynamic): New static variable.
536 (long_options): Added "dynamic".
537 (usage): Mention -D and --dynamic.
538 (main): Add D to getopt string. Handle -D by setting dynamic.
539 (display_rel_file): If dynamic is non-zero, read dynamic symbols
540 rather than normal symbols.
541 * nm.1: Updated for -D (--dynamic) option.
542 * objdump.c (dump_dynamic_symtab): New global variable.
543 (dump_dynamic_reloc_info): New global variable.
544 (dynsyms, dynsymcount): New global variables.
545 (usage): Mention -R, -T, --dynamic-syms and --dynamic-reloc.
546 (long_options): Added "dynamic-reloc" and "dynamic-syms".
547 (slurp_symtab): If no symbols, return rather than exit.
548 (slurp_dynamic_symtab): New function.
549 (display_bfd): Handle dump_dynamic_symtab and
550 dump_dynamic_reloc_info.
551 (dump_symbols): Take new dynamic argument, indicating whether to
552 display dynamic symbols.
553 (dump_relocs): Move most printing into dump_reloc_set.
554 (dump_dynamic_relocs): New function.
555 (dump_reloc_set): New function, extracted from dump_relocs.
556 (main): Add R and T to getopt string. Handle -T by setting
557 dump_dynamic_symtab and -R by setting dump_dynamic_reloc_info.
558 * objdump.1: Updated for -R (--dynamic-reloc) and -T
559 (--dynamic-syms) options.
560 * binutils.texi: Updated for new nm and objdump options.
562 Wed Mar 30 15:52:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
564 Update for recent BFD changes to symbol and reloc reading. Rename
565 all uses of get_symtab_upper_bound to bfd_get_symtab_upper_bound.
567 * coffgrok.c (symcount): Change to long.
568 (do_sections_p1): Check for error return from
569 bfd_get_reloc_upper_bound. Change relcount to long, and check for
570 error from bfd_canonicalize_reloc.
571 (coff_grok): Change storage to long. Check for error from
572 bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
573 * nlmconv.c (main): Change symcount, newsymalloc, newsymcount, and
574 i to long. Check for error from bfd_get_symtab_upper_bound and
575 bfd_canonicalize_symtab.
576 (copy_sections): Change reloc_size and reloc_count to long. Check
577 for error from bfd_get_reloc_upper_bound and
578 bfd_canonicalize_reloc.
579 (mangle_relocs, i386_mangle_relocs, alpha_mangle_relocs): Change
580 reloc_count_ptr argument to long *. Make corresponding changes to
581 variables loaded from *reloc_count_ptr.
582 * nm.c (display_rel_file): Change storage and symcount to long.
583 Check for errors from bfd_get_symtab_upper_bound and
584 bfd_canonicalize_symtab.
585 * objcopy.c (filter_symbols): Change symcount, src_count and
587 (copy_object): Change symcount to long. Pass another argument to
588 fprintf. Check for errors from bfd_get_symtab_upper_bound and
589 bfd_canonicalize_symtab.
590 (copy_section): Change relcount to long. Check for errors from
591 bfd_get_reloc_upper_bound and bfd_canonicalize_reloc.
592 (mark_symbols_used_in_relocations): Change relcount and i to long.
593 Check for errors form bfd_get_reloc_upper_bound and
594 bfd_canonicalize_reloc.
595 * objdump.c (storage): Remove global variable.
596 (symcount): Changed to long.
597 (slurp_symtab): New local variable storage. Check for errors from
598 bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
599 (remove_useless_symbols): Change return value and count to long.
600 (objdump_print_address): Change min, max, thisplace and i to long.
601 (disassemble_data): Change i to long.
602 (dump_symbols): Change count to long.
603 (dump_relocs): Change relcount to long. Check for errors from
604 bfd_ret_reloc_upper_bound and bfd_canonicalize_reloc.
605 (display_info_table): Add casts when passing LONGEST_ARCH for
608 Tue Mar 29 14:59:04 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
610 * nm.c (display_archive): Close each archive element after it has
612 * objdump.c (display_file): Likewise.
614 Mon Mar 28 13:04:08 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
616 * configure.in: Change error message to refer to bfd/config.bfd
617 rather than bfd/configure.in.
619 Sun Mar 27 16:23:39 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
621 * More fixes for object formats which allow multiple sections
623 * objcopy.c (setup_section): Make a new output section even if
624 one already exists with the given name.
625 (copy_section): Use isection->output_section rather than trying
626 to look the output section up by its (possibly non-unique) name.
628 * Makefile.in (install-info): Look for binutils.info in the
629 current directory, then in $(srcdir). Don't use $<.
631 Mon Mar 21 12:55:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
633 * objdump.c (objdump_print_address): Make static. Declare with
634 prototype. Change vardiff from int to bfd_signed_vma. Correct
635 binary search termination condition. When looking for same
636 section symbol in relocatable file, handle final symbol correctly.
638 Sun Mar 20 11:26:36 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
640 * Makefile.in: Avoid bug in hpux sed.
642 * objcopy.c: Changes to keep it from stripping symbols used
643 in output relocations.
644 (mark_symbols_used_in_relocations): New function. Mark symbols
645 used in output relocations with BSF_KEEP.
646 (filter_symbols): Do not strip symbols marked with BSF_KEEP.
647 (copy_object): Reorder actions. First setup sections, then
648 build the output symbol table, then copy the section contents.
650 Fri Mar 18 10:53:55 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
652 * ar.c (write_archive): Allocate space for the null byte. From
653 Robert Lipe <robertl@arnet.com>.
655 Thu Mar 17 16:20:28 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
657 * Makefile.in: Built nm.new and strip.new to avoid problems with
658 collect when . is in PATH.
659 (STRIP_PROG): Change from strip to strip.new.
660 (NM_PROG): Change from nm to nm.new.
661 (install): Remove the .new when installing.
663 Wed Mar 16 16:27:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
665 * nlmconv.c (powerpc_build_stubs): Set BSF_DYNAMIC flag for each
666 symbol for which we build a stub.
667 (powerpc_mangle_relocs): Only reset TOC pointer for a call to a
668 symbol with BSF_DYNAMIC flag set.
670 Tue Mar 15 23:04:13 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
672 * objcopy.c (filter_symbols): Use bfd_is_local_label to determine
673 if a symbol represents a compiler-generated local label.
674 (copy_object): Give the BFD backends a chance to copy any private
675 bfd data from the input BFD to the output BFD.
676 (setup_section): Give the BFD backends a chance to copy any private
677 section data from the input section to the output section.
679 Mon Mar 14 11:15:58 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
681 * objcopy.c (mangle_section): Delete unused function.
682 (setup_section): Set osection here instead of calling
683 mangle section to do it.
685 Mon Mar 14 12:11:01 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
687 * ar.c (write_archive): Close inarch before unlinking it.
689 Fri Mar 11 22:20:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
691 * nlmconv.c (main): For PowerPC, call powerpc_build_stubs and
692 powerpc_resolve_stubs. Use __GOT0, not __toc_start. Handle it if
693 the start and end symbols are not in the text section.
694 (struct powerpc_stub): New struct definition.
695 (powerpc_stubs, powerpc_stub_insns): New static variables.
696 (powerpc_initial_got_size): New static variable.
697 (powerpc_build_stubs): New function.
698 (powerpc_resolve_stubs): New function.
699 (powerpc_mangle_relocs): Clear extraneous data in .got section.
700 Rearrange reloc handling to handle ELF relocs that are not
701 partial_inplace. Resolve PC relative relocs.
703 Wed Mar 9 13:48:11 1994 Steve Chamberlain (sac@jonny.cygnus.com)
705 * ar.c (move_members): Fix it so that the abi positional modifiers
706 don't delete all archive members following the insert point.
708 Tue Mar 8 13:14:43 1994 Steve Chamberlain (sac@jonny.cygnus.com)
710 * coffgrok.[ch]: New files, understand coff objects.
711 * coffdump.c: Uses coffgrok to dump out the debug info of a coff
713 * sysroff.info: Description of a SYSROFF object file.
714 * sysinfo.y, syslex.l: Parse info file, generate a reader, writer,
715 header files and a printer.
716 * srconv.c: Uses coffgrok.c and sysroff.info to convert a coff
717 file to a SYSROFF file.
719 Sat Feb 26 13:35:26 1994 Stan Shebs (shebs@andros.cygnus.com)
721 * ar.c (do_quick_append): Pad with a genuine character 10,
722 rather than whatever '\n' might happen to be.
724 Tue Feb 22 18:25:52 1994 Ian Lance Taylor (ian@cygnus.com)
726 * nlmconv.c (main): Ignore debugging symbols when looking for
727 special symbols by name.
729 Sun Feb 20 18:47:42 1994 Ian Lance Taylor (ian@lisa.cygnus.com)
731 * nlmconv.c: Include libiberty.h.
733 Support for PowerPC NetWare.
734 * nlmconv.c (main): For PowerPC NetWare, automatically define the
735 special symbols __toc_start.
736 (select_output_format): Handle bfd_arch_powerpc.
737 (mangle_relocs): Likewise.
738 (powerpc_mangle_relocs): New function.
740 Thu Feb 17 09:28:23 1994 David J. Mackenzie (djm@thepub.cygnus.com)
742 * ar.c, bucomm.c, nlmconv.c, nm.c, objcopy.c, objdump.c,
743 size.c: Use bfd_get_error and bfd_set_error and new error names.
745 Fri Feb 11 15:54:51 1994 David J. Mackenzie (djm@thepub.cygnus.com)
747 * objcopy.c (strip_main, copy_main): Add missing 'break' in switch.
749 Mon Feb 7 19:45:52 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
751 * objdump.c (disassemble_data): Handle bfd_arch_powerpc.
753 Sun Feb 6 22:08:20 1994 David J. Mackenzie (djm@thepub.cygnus.com)
755 * strings.c objdump.c nlmconv.c objcopy.c nm.c ar.c size.c (main):
756 Call xmalloc_set_program_name.
758 Fri Feb 4 10:46:01 1994 David J. Mackenzie (djm@thepub.cygnus.com)
760 * objcopy.c (filter_bytes): Make MEMHUNK a char *, not PTR, so we
761 can do arithmetic on it.
763 Thu Feb 3 14:06:41 1994 David J. Mackenzie (djm@thepub.cygnus.com)
765 * objdump.c (dump_section_stabs, read_section_stabs,
766 print_section_stabs): Functions broken out of dump_stabs_1.
767 Free the stabs and strings when done with them.
769 Wed Feb 2 13:42:23 1994 David J. Mackenzie (djm@thepub.cygnus.com)
771 * nlmconv.c (main): Use bfd_get_flavour instead of struct member.
772 * ar.c (print_contents, extract_file), size.c
773 (print_berkeley_format, print_sysv_format): Use bfd_get_filename and
774 bfd_my_archive instead of dereferencing the structs directly.
776 * ar.c: Use bfd_fatal and bfd_nonfatal instead of bfd_perror and exit.
777 Indent. Remove DEFUNs.
779 * nlmconv.c (main), objcopy.c (copy_file): Print matching formats
781 * nm.c (display_file, display_archive), size.c (display_bfd):
783 Print matching formats if there is an ambiguous match. Use
784 bfd_nonfatal instead of hardcoded error message if nothing matches.
786 * arsup.c, ar.c, objdump.c: Use bfd_get_filename instead of
789 * nm.c (display_archive): New function, from code in display_file.
790 (display_rel_file): Renamed from do_one_rel_file.
793 (display_archive): New function from code in display_file.
794 (display_file): Check bfd_close error return.
796 * strings.c (strings_object_file): Check bfd_check_format
799 * strings.c, objdump.c, size.c: Use bfd_nonfatal instead of bfd_perror.
801 * bucomm.c: Delete references to exit_handler. It wasn't set
802 anywhere, and now that we're using the libiberty xmalloc, it
803 wouldn't always get called before exiting.
804 (list_matching_formats): Function moved from objdump.c.
805 * bucomm.h: Declare it.
807 * objdump.c (disassemble_data): Move some variable decls closer to
808 their use. Add some comments. Replace a nested block with a
811 Mon Jan 31 18:50:41 1994 Stan Shebs (shebs@andros.cygnus.com)
813 * objdump.c (display_target_list, display_info_table): Check that
814 the bfd of the dummy output file is not null.
816 Wed Jan 26 13:13:18 1994 David J. Mackenzie (djm@thepub.cygnus.com)
818 * objcopy.c (filter_bytes): New function.
819 (copy_section): Call it.
820 (copy_options, copy_usage, copy_main): Add --byte option to
821 activate it. Appropriate the -b option (which was an undocumented
822 synonym for -F) for it, also. Add --interleave, -i option for
824 (setup_section, copy_section, mangle_section): Renamed with no `s'
826 * objcopy.1, binutils.texi: Document the new options.
828 * objdump.c (display_target_tables, display_target_list):
829 New functions broken out of display_info.
830 Eliminate some magic constants. Use more meaningful variable names.
831 (dump_bfd_header): New function broken out of display_bfd.
832 (dump_section_header): New function broken out of dump_headers.
833 (remove_useless_symbols): Don't shadow global variable name with
835 (objdump_print_address): Fix backward test.
837 Tue Jan 25 19:40:54 1994 Stan Shebs (shebs@andros.cygnus.com)
839 * bucomm.c (print_arelt_descr): Change decl of `when' to time_t.
840 * objdump.h: Removed.
842 Mon Jan 24 13:29:02 1994 David J. Mackenzie (djm@thepub.cygnus.com)
844 * objdump.c (display_file): Remove call to list_matching_formats.
845 It would never be called.
846 (list_matching_formats): Take an arg giving the list of matching
848 (display_bfd): Pass the arg, and get it filled in by calling
849 bfd_check_format_matches instead of bfd_check_format.
850 (display_info, display_info_table): target_vector was renamed to
853 * binutils.texi (objdump): Note some limitations of -h section
856 Sat Jan 22 16:20:46 1994 Stan Shebs (shebs@andros.cygnus.com)
858 * Makefile.in (MALLOC): Set to emptiness by default.
859 (ALL_CFLAGS): Add and use.
860 (arparse.h): Make it depend on arparse.y.
861 * ar.c (libbfd.h): Don't require to be in ../bfd.
862 * objdump.c (comp): Rename to compare_symbols.
864 Fri Jan 21 20:22:30 1994 David J. Mackenzie (djm@thepub.cygnus.com)
866 * objdump.c (list_matching_formats): If the file format is ambiguous,
867 print the matching names so the user can choose one.
868 (display_bfd): Call it.
869 (display_file): Call it.
871 Fri Jan 21 19:17:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
873 * objdump.c (disassemble_data): Support bfd_arch_rs6000.
875 Mon Jan 17 13:57:25 1994 Stan Shebs (shebs@andros.cygnus.com)
877 * objdump.c (stab_name): Allocate dynamically.
878 (stab_print): Use pointers to strings instead of char arrays.
879 (dump_stabs): Change alloc and init of arrays appropriately.
880 (dump_stabs_1): Always decide whether to print stab_name or
881 the stab's type number, if unnamed.
883 Fri Jan 14 14:42:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
885 * objcopy.c (strip_main, copy_main): Don't clobber the input file
888 * nlmconv.c (main): Warn about an attempt to use a shared library
889 with uninitialized data.
891 * nlmconv.c (setup_sections): Make sure that we align the
892 output_offset of each input section appropriately.
894 Thu Jan 13 17:32:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
896 * objdump.c (dump_relocs): Don't crash if section name is NULL.
898 Tue Jan 11 19:46:33 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
900 * filemode.c (filemodestring): Commented out; not used.
901 (mode_string): Use POSIX definitions.
902 (ftypelet): Likewise.
903 (rwx): Removed; no longer used.
904 * bucomm.c: Include bucomm.h.
905 (bfd_nonfatal, bfd_fatal): Argument is const.
906 (fatal): Make __STDC__ version.
907 * bucomm.h (mode_string): Declare.
908 * Makefile.in (bucomm.o): Depend upon bucomm.h
910 Sun Jan 9 12:03:20 1994 Ken Raeburn (raeburn@rtl.cygnus.com)
912 * bucomm.c (xmalloc, xrealloc): Deleted.
913 * bucomm.h (xmalloc, xrealloc): Fix prototypes, to correspond to
914 libiberty version of functions.
916 Thu Jan 6 06:18:15 1994 David J. Mackenzie (djm@thepub.cygnus.com)
918 * binutils.texi: Add a chapter summarizing the ways to select
919 aspects of the target for each program.
921 * objdump.c (long_options, usage): Add long equivalents for all
922 remaining short options that lacked them.
923 * binutils.texi objdump.1: Document them.
925 * size.c (usage): Tweak usage message.
926 * size.1: Add missing `=' in examples.
928 * binutils.texi strip.1 objcopy.1 nlmconv.1 objcopy.c nlmconv.c:
929 Use "--target=bfdname" as the option to select the BFD target,
930 like nm and size already do.
931 Reserve "--format=format" for textual output selection options, but
932 for now keep old option names as obsolete for backward compatibility.
934 * strings.c (main, strings_object_file, usage): Add --target option.
935 * binutils.texi strings.1: Document it.
937 Sat Jan 1 13:58:24 1994 David J. Mackenzie (djm@thepub.cygnus.com)
939 * ar.c (main): Add \n in error message.
941 Thu Dec 23 12:23:11 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
944 * ar.c (main): Put parens around assignment used as truth value.
945 * objcopy.c (strip_main): Remove unused variables. Return 0.
946 (copy_main): Remove unused variables. Return 0.
947 * objdump.c (display_bfd): Declare return value as void.
948 (stab_print): Use "" instead of 0 to initialize array.
949 (dump_stabs_1): Print vma using printf_vma.
950 (display_info): Put parens around assignment used as truth value.
951 * strings.c (print_strings): Cast printf arguments.
953 * objcopy.c (copy_main): Use copy_options, not strip_options.
955 * nlmheader.y (command): Warn about illegal date values.
957 Wed Dec 15 11:18:03 1993 David J. MacKenzie (djm@frosty.eng.umd.edu)
959 * bucomm.c bucomm.h: Run through indent. De-ansidecl-ify.
960 (bfd_nonfatal): New function.
961 (bfd_fatal): Call it.
963 * objcopy.c (smart_rename): Do a copy if the dest file has
964 multiple hard links. Remove source file on successful copy.
965 Try to preserve mode and owner on successful rename.
967 * objcopy.c: Run through indent. Clean up a bit.
968 Make global variables static.
969 Make {input,output}_{target,filename}, show_version local
970 to various functions.
971 New global variable `status' for exit status.
972 (strip_main, copy_main): New functions with code from main.
973 (nonfatal): New macro. Use it globally instead of bfd_perror and
976 (copy_object): Call mangle_sections with bfd_map_over_sections.
977 (mangle_sections): Adjust for new calling convention.
979 Fri Dec 10 11:28:11 1993 Ian Lance Taylor (ian@deneb.cygnus.com)
981 * nlmheader.y (command): Accept MAP and FULLMAP without arguments.
982 * nlmconv.c (main): Change error message for MAP and FULLMAP.
984 Thu Dec 9 17:47:19 1993 Ian Lance Taylor (ian@deneb.cygnus.com)
986 * nlmconv.c (main): Warn about imported symbols that are not in
987 the IMPORT list even if the IMPORT keyword is not used.
989 * nlmconv.c (debug, unlink_on_exit): New static variables.
990 (long_options): Add "debug" and "linker".
991 (main): Handle -d and -l arguments. Make command line input and
992 output files optional. Parse the command file before opening the
993 BFD's, which requires storing more information in local variables.
994 If INPUT names multiple files, link them together. Use OUTPUT for
995 the output file name if not named on command line.
996 (show_usage): Changed for new options.
997 (link_inputs): New function to automatically invoke linker to
998 handle multiple INPUT files.
999 (choose_temp_base_try, choose_temp_base, pexecute): New functions,
1000 mostly copied from gcc/gcc.c.
1001 * nlmconv.h (input_files, output_file): Declare.
1002 * nlmheader.y (input_files, output_file): Define.
1003 (command): Support INPUT with a string_list argument. Support
1005 (string_list): Renamed from module_list.
1006 * Makefile.in (nlmconv.o): Define LD_NAME based on
1007 program_transform_name.
1009 Wed Dec 8 10:09:04 1993 Ian Lance Taylor (ian@deneb.cygnus.com)
1011 * nlmheader.y (nlmheader_identify): New function. Use it to print
1012 the program name just once, instead of with every error message.
1014 Mon Dec 6 16:11:32 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1016 * nlmconv.c (long_options): Changed --header-info to --header-file
1017 to match documentation and usage message.
1019 Sun Dec 5 01:31:01 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
1021 * objdump.c (dump_relocs): Avoid dereferencing a NULL sym_ptr_ptr
1024 Thu Dec 2 16:00:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1026 * nlmconv.c (main): Change various types from bfd_size_type to
1027 size_t, since they have to be arguments to fread and fwrite.
1028 Change set from char * to unsigned char *.
1029 (select_output_format): Make mach argument unsigned. Handle
1031 (setup_sections): Don't copy the .reginfo section of an ECOFF
1032 file. Call bfd_set_reloc to initialize the relocation fields.
1033 (copy_sections): Don't copy the .reginfo section of an ECOFF file.
1034 Combine all relocs for a section.
1035 (mangle_relocs): Change type of relocs to permit specific
1036 functions to change it. Call alpha_mangle_relocs for alpha,
1037 default_mangle_relocs for other architectures.
1038 (default_mangle_relocs): New function. Adjust the address of all
1039 relocs by the output_offset.
1040 (i386_mangle_relocs): Change type of relocs argument. Cast length
1041 argument to memmove to size_t.
1042 (alpha_mangle_relocs): New function.
1044 Wed Nov 17 17:38:58 1993 Sean Eric Fagan (sef@cygnus.com)
1046 * nlmconv.c (select_output_format): Use nlm32-sparc for
1049 Wed Nov 17 14:41:35 1993 Jeffrey Osier (jeffrey@thepub.cygnus.com)
1051 * nlmconv.1: added man page
1052 * objcopy.1: fixed format errors
1054 Wed Nov 17 12:03:41 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1056 * Makefile.in: Use CFLAGS as well as LDFLAGS when linking.
1058 Wed Nov 17 04:50:55 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1060 * strings.1: Fix typo.
1062 Mon Nov 15 12:03:20 1993 Ken Raeburn (raeburn@rtl.cygnus.com)
1064 * Makefile.in (DISTSTUFF): Build "info".
1065 (VERSION): Updated to cygnus-2.3.1; 2.3 has gone out.
1067 Sun Nov 14 00:27:24 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
1069 * objdump.c (dump_stabs): Handle stabs-in-som as implemented
1070 by the new BFD SOM assembler.
1072 Sat Nov 13 07:14:05 1993 David J. Mackenzie (djm@rtl.cygnus.com)
1074 * ar.1 c++filt.1 nm.1 objcopy.1 objdump.1 ranlib.1 size.1
1075 strings.1 strip.1: Replace \(em in NAME section with \- so
1076 makewhatis can grok it.
1078 Tue Nov 9 15:22:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1080 * nlmconv.c (i386_mangle_relocs): Adjust reloc address by
1081 section output_offset.
1083 Fri Nov 5 12:11:52 1993 Jeffrey Osier (jeffrey@thepub.cygnus.com)
1085 * binutils.texi: added nlmconv chapter
1087 Wed Nov 3 16:10:50 1993 Jeffrey Wheat (cassidy@cygnus.com)
1089 * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS
1091 Wed Nov 3 15:09:23 1993 Ken Raeburn (raeburn@rover.cygnus.com)
1093 * Makefile.in (distclean): Don't get rid of dvi or info files.
1095 Tue Nov 2 13:29:59 1993 David J. Mackenzie (djm@rtl.cygnus.com)
1097 * objcopy.c (S_ISLNK): Define as 0 if there's no S_IFLNK.
1099 Fri Oct 29 16:02:34 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1101 * binutils.texi: Move objcopy docs into alphabetical order.
1103 * objdump.c: Use xmalloc instead of malloc.
1105 Fri Oct 29 11:11:14 1993 Stan Shebs (shebs@rtl.cygnus.com)
1107 * objdump.c (info): Rename to formats_info.
1108 (dump_stabs_1): Better comments and formatting.
1110 Thu Oct 28 19:43:16 1993 Stan Shebs (shebs@rtl.cygnus.com)
1112 * ar.c (main): Always create the archive when quick appending,
1113 even if no input files have been given.
1115 Wed Oct 27 12:03:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1117 * nlmconv.c (main): Set sharedDebugRecordOffset and
1118 sharedDebugRecordCount fields in extended header.
1120 * nlmconv.c (main): Force moduleName field to upper case.
1122 Mon Oct 25 16:45:42 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1124 * objcopy.c (main): Give a usage message if there are too many
1127 Mon Oct 25 10:37:08 1993 Ken Raeburn (raeburn@rover.cygnus.com)
1129 * Makefile.in (install-info): Rewrite to take advantage of VPATH,
1130 so FSF distributions (with info files in $(srcdir)) install
1132 (DISTSTUFF): Build nlmheader.c too.
1134 Fri Oct 22 11:43:23 1993 Ken Raeburn (raeburn@rover.cygnus.com)
1136 * ar.c (program_name): Don't define here.
1137 * objdump.c: Include "bucomm.h".
1138 (xmalloc): Don't declare here.
1139 (program_name): Don't define here.
1140 (program_version): Fixed type in declaration.
1141 * size.c: Include "bucomm.h".
1142 (program_name): Don't declare here.
1144 Fri Oct 22 14:10:41 1993 Mark Eichin (eichin@cygnus.com)
1146 * objdump.c (fprintf): hide declaration in FPRINTF_ALREADY_DECLARED
1148 Fri Oct 1 12:43:00 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1150 * nlmconv.c (i386_mangle_relocs): Resolve and remove PC relative
1151 relocs against defined symbols in the same section.
1153 Thu Sep 30 16:46:26 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
1155 * Makefile.in (binutils.dvi): use TEXIDIR to find texinfo.tex
1157 Sat Sep 25 18:09:29 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1159 * objcopy.c (simple_copy, smart_rename): New functions.
1162 Fri Sep 24 15:38:29 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1164 * Makefile.in (clean, distclean): Recurse into testsuite.
1166 Thu Sep 23 01:05:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1168 * objcopy.c (setup_sections, copy_sections): If stripping, don't
1169 copy SEC_DEBUGGING sections.
1170 * objdump.c (dump_headers): Print SEC_DEBUGGING flag.
1172 * objdump.c (usage): Mention --stabs.
1174 * objcopy.c (copy_object): Copy all applicable file flags.
1175 (copy_file): Don't copy EXEC_P specially here.
1177 Mon Sep 20 19:28:57 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1179 * nlmconv.c (main): Adjust data section size to correspond to bss
1180 alignment adjustment. Clear BSF_SECTION_SYM if symbol is moved to
1181 a different section. Use time_t for time variable.
1182 (setup_sections): Only put sections with contents in output NLM.
1183 (i386_mangle_relocs): No symbols are common at this point. Add
1184 casts to avoid warnings.
1186 Fri Sep 10 11:00:40 1993 Stan Shebs (shebs@rtl.cygnus.com)
1188 * objdump.c: Made the --stabs option work for stabs-in-coff.
1189 (ELF_STAB_DISPLAY): Removed.
1190 (dump_elf_stabs): Renamed to dump_stabs, changed to run for
1191 any object file format.
1192 (dump_elf_stabs_1): Renamed to dump_stabs_1, added calls to
1193 generic BFD routines for non-ELF case, changed format of message
1194 for no-section-found case.
1195 (display_bfd): Always call dump_stabs if requested.
1196 (dump_data): Call bfd_section_size to get section size.
1198 Fri Sep 10 08:12:23 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1200 * Makefile.in (install): Don't put strings in tooldir/bin.
1202 Mon Sep 6 15:39:04 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1204 * nlmconv.c (total_bss_size): Removed.
1205 (main): Set the bss vma to always follow the data section. Move
1206 symbols into new sections, and adjust values by output_offset.
1207 (setup_sections): Don't copy all sections, but instead point all
1208 text sections to .text, all data sections to .data, and all bss
1210 (copy_sections): Adjust accordingly.
1212 Thu Sep 2 12:34:03 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1214 Only build nlmconv if configured for a NetWare target.
1215 * configure.in: If we have some *-*-netware* target, or are using
1216 all targets, set BUILD_NLMCONV to $(NLMCONV_PROG) in Makefile.
1217 * Makefile.in (PROGS): Use $(BUILD_NLMCONV) rather than
1220 Tue Aug 31 14:13:35 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1222 * objdump.c (ARCH_all): Define ARCH_hppa too.
1223 (dump_headers): Don't test for SEC_BALIGN if it's not defined by
1226 Tue Aug 31 13:29:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1228 * nlmconv.c (main): Force creation of .bss section. Set up the
1229 sections before looking at the symbols. Move all common symbols
1230 into .bss section. Automatically define _edata and _end. Only
1231 export symbols in the export list, with multiple prefixes if
1232 necessary. Warn if no version. Always create extended header.
1233 Set date automatically if not already set.
1234 (setup_sections): Count size of bss sections.
1235 (mangle_relocs, i386_mangle_relocs): Accept section argument, and
1236 take reloc_count as a changeable pointer; changed callers.
1237 (i386_mangle_relocs): Remove PC relative relocs within a section,
1238 as they require no adjustment.
1239 * nlmheader.y: Fixed memory allocation throughout: token STRING is
1240 now allocated on the heap, and freed if not needed. Null
1241 terminated copyright message. Accept version with only two
1243 (symbol_list_opt): New nonterminal, either symbol_list or empty.
1244 (symbol_list): Use left recursion to avoid overflowing parser
1246 (yylex): Rearranged beginning of line check. Accept quoted
1247 strings using single quotes. End generic argument at comment
1248 character or parentheses.
1249 (string_list_append): Fixed.
1250 (string_list_append1): New function.
1252 * bucomm.h: The first argument to xrealloc is PTR, not char *.
1253 * bucomm.c (xrealloc): Use PTR rather than char *.
1254 * Makefile.in (objdump.o): Depend upon config.status to notice
1255 --with-targets changes.
1256 (nlmconv.o): Depend upon bucomm.h.
1258 Tue Aug 17 09:46:01 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1260 * configure.in: Don't pass cpu to config.bfd.
1262 Thu Aug 12 16:43:04 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1264 * Makefile.in ($(NM_PROG)): Depend on demangle.o.
1265 (demangle.o): New target.
1266 (cplus-dem.o): Depend on it, to force compilation order when doing
1269 * nm.c (print_symbol_info_{bsd,sysv,posix}): Take a bfd arg.
1270 (struct output_fns print_symbol_info): Ditto.
1271 (long_options, usage, main): Add -C --demangle option.
1272 (print_symname): New function, demangling if requested.
1273 (print_symbols, print_symbol_info_{bsd,sysv,posix}): Use it.
1275 Wed Aug 11 22:57:23 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1277 * Makefile.in: Put CFLAGS last in compilation rules and omit from
1278 linking rules. Use ARCHDEFS to compile objdump.c.
1279 Update dependencies.
1280 * configure.in: Construct ARCHDEFS based on the BFD target makefile
1282 * objdump.c: Conditionalize calls to the print_insn_ARCH functions
1283 according to ARCHDEFS.
1285 Thu Aug 12 08:06:15 1993 Ian Lance Taylor (ian@cygnus.com)
1287 * ar.c: Removed obsolete and non-functional GNU960 code.
1289 Wed Aug 11 13:08:26 1993 Ian Lance Taylor (ian@cygnus.com)
1291 * size.c (berkeley_sum): New function.
1292 (bsssize, datasize, textsize): New global variables.
1293 (bss_section_name, data_section_name, text_section_name): Removed.
1294 (print_berkeley_format): Map berkeley_sum over all the sections,
1295 rather than only reporting sizes of specifically named sections.
1296 * Makefile.in ($(OBJDUMP_PROG)): Removed dependency on size.o.
1298 Tue Aug 10 10:46:01 1993 Ian Lance Taylor (ian@cygnus.com)
1300 * nlmconv.c, nlmconv.h, nlmheader.y: New files for program to
1301 convert object files into NetWare Loadable Modules.
1302 * Makefile.in (NLMCONV_PROG): New macro, define to be nlmconv.
1303 (PROGS): Add NLMCONV_PROG.
1304 (nlmheader.c, nlmheader.o, nlmconv.o, $(NLMCONV_PROG)): New
1307 Thu Aug 5 15:48:32 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com)
1309 * Makefile.in: define MAKEOVERRIDES to an empty string
1311 Wed Aug 4 17:08:08 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1313 * objcopy.c (copy_file): Make failures to process a file nonfatal.
1315 Mon Aug 2 11:28:23 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1317 * nm.c: Add -B option, like --format=bsd.
1319 Tue Jul 27 16:29:54 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1321 * objcopy.c (copy_file): If the file is neither an object nor an
1322 archive, give an error rather than returning success.
1324 Mon Jul 19 16:13:40 1993 Ken Raeburn (raeburn@rtl.cygnus.com)
1326 * objdump.c (objdump_print_address): Prefer non-local symbols over
1327 local ones, and especially discriminate against debugging symbols.
1328 Also, for relocateable files, try to find a symbol in the current
1329 section, instead of picking one from some random section with a
1330 convenient value (read, section offset).
1331 (disassemble_data): Cast argument to malloc to size_t first.
1332 (dump_data): Likewise.
1333 (dump_relocs): If a single section name is specified, show relocs
1334 only for that section. Otherwise, silently omit sections without
1335 relocs. Format table nicely even if values are printed using 16
1336 digits instead of 8.
1338 Fri Jul 16 15:19:59 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1340 * nm.c: Changes for final version of POSIX.2.
1341 (print_symbol_filename_{bsd,sysv,posix}): New functions.
1342 (formats): Add an element for a pointer to them.
1343 (print_symbols): Call it.
1344 (print_object_filename_posix, print_archive_member_posix): Produce
1345 output according to new POSIX.2 spec.
1347 * strings.c (print_strings): Handle STREAM being NULL.
1348 (strings_a_section): Pass a NULL.
1349 (main): Don't open /dev/null.
1351 Thu Jul 15 12:44:09 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1353 * objdump.c (disassemble_data): Handle the m88k.
1354 (display_bfd): Use bfd_errmsg, rather than just claiming that the
1355 bfd is not an object file.
1357 Mon Jul 12 17:55:34 1993 K. Richard Pixley (rich@cygnus.com)
1359 * Makefile.in (TAGS): make work again by naming directories
1360 explicitly rather than depending on undefined macros.
1361 (INSTALL_XFORM): correct bad install target.
1363 Fri Jul 2 16:58:34 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1365 * strings.c: Doc fixes.
1367 Sun Jun 27 13:35:24 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1369 * Makefile.in: Note dependencies on bucomm.h.
1370 (cplus-dem.o): Link c++filt with version.o.
1372 * strings.c: Include bucomm.h and add prototypes to other decls.
1375 * bucomm.h: Declare xrealloc.
1377 * nm.c, objcopy.c, objdump.c, size.c, strings.c (main, usage): Add
1378 --help option. Put "GNU" in the version message.
1379 (usage): Take stream and exit status as args.
1380 (main): Pass new args to usage.
1382 Fri Jun 25 23:12:12 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1384 * strings.c, strings.1: New files.
1385 * binutils.texi: Document strings.
1386 * Makefile.in: Add rules for it.
1388 Fri Jun 25 20:44:43 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1390 * objdump.c: Use size-independent bfd elf section names.
1392 Sun Jun 20 23:09:06 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1394 * objdump.c (objdump_print_address): Handle wide offsets by
1395 calling sprintf_vma.
1397 Fri Jun 18 14:29:12 1993 Per Bothner (bothner@deneb.cygnus.com)
1399 * objdump.c (syms2): Removed unused variable.
1400 * objdump.c (remove_useless_symbols): New function.
1401 * objdump.c (comp): Simplify.
1402 * objdump.c (dis-assemble_data): Make simpler and more
1403 efficient how we filter out useless symbols: Just filter
1404 BEFORE the sort (using remove_useless_symbols).
1405 * objdump.c (objdump_print_address): Simplify.
1406 Change output syntax to match gdb.
1408 Thu Jun 17 16:53:56 1993 david d `zoo' zuhn (zoo@cygnus.com)
1410 * Makefile.in: canonicalize install.sh; for use within
1411 this directory (and subdirs)
1413 Mon Jun 14 12:13:22 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
1415 * Makefile.in (install, install-info): remove parentdir support,
1416 use INSTALL_XFORM; define INSTALL_XFORM
1418 Thu Jun 10 17:29:21 1993 Per Bothner (bothner@cygnus.com)
1420 * objcopy.c (copy_object): Fix bad size passed to xmalloc().
1422 Mon Jun 7 12:41:12 1993 Per Bothner (bothner@rtl.cygnus.com)
1424 * Makefile.in (INCLUDES): Add -I../bfd for sysdep.h and bfd.h.
1425 * configure.in: No longer need to configure to get sysdep.h.
1426 * objcopy.c (copy_object): Fix symbol table handling.
1428 Fri Jun 4 17:20:03 1993 Per Bothner (bothner@cygnus.com)
1430 * objcopy.c (filter_symbols): Cannot filter the symbols
1431 in place, because that confuses the relocs, so take separate
1432 parameter for output array.
1433 * objcopy.c (sympp): Make two variables: isympp and osympp.
1434 * objcopy.c (copy_object): Allocate separate array (osympp)
1435 for filtered symbols.
1437 Fri Jun 4 10:51:44 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1439 * Makefile.in: change recursion test to presence of a configured
1442 Thu Jun 3 14:05:57 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1444 * Makefile.in (underscore.c): Hack the backquoted command so it
1445 doesn't cause Solaris make to bomb.
1447 Thu Jun 3 10:40:19 1993 Jeffrey Osier (jeffrey@cygnus.com)
1449 * Makefile.in: added c++filt and objcopy to MANPAGES variable
1450 * .Sanitize: keep c++filt.1 and objcopy.1
1452 Thu Jun 3 00:32:52 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1454 * Makefile.in: rename LOADLIBES to EXTRALIBS
1456 Wed Jun 2 18:30:24 1993 Jeffrey Osier (jeffrey@cygnus.com)
1458 * c++filt.1, objcopy.1: new man pages
1460 Fri May 28 15:01:24 1993 Per Bothner (bothner@rtl.cygnus.com)
1462 * Makefile.in (install): Also install ar and ranlib in
1463 $(tooldir)/bin; needed for building libgcc.a.
1464 * objdump.c (objdump_print_address): Fix the check
1465 "coincidental" label matches by dis-allowing undefined
1468 Thu May 27 16:58:31 1993 Jeffrey Osier (jeffrey@cygnus.com)
1470 * biutils.texi: revised c++filt chapter
1472 Wed May 26 17:24:17 1993 Ian Lance Taylor (ian@cygnus.com)
1474 * Makefile.in (FLAGS_TO_PASS): Pass down CC and CFLAGS.
1476 Tue May 25 00:26:47 1993 Ken Raeburn (raeburn@cygnus.com)
1478 * objdump.c (slurp_symtab): Print warning for bad symbol table.
1479 (bfd_elf32_find_section, Elf32_Internal_Shdr): Updated
1480 declarations and uses.
1482 * Makefile.in (DISTSTUFF): Don't build binutils.mm.
1484 Fri May 21 10:51:19 1993 David J. Mackenzie (djm@rtl.cygnus.com)
1486 * nm.c: Add -f/--format, -P/--portability, -t/--radix options.
1487 Make global variables static.
1488 (main): Make -v like -n, not -V, and make -A like -o, for POSIX.2.
1489 (set_print_radix, set_output_format,
1490 print_{object_filename,archive_filename,archive_member,symbol_info}
1491 {bsd,sysv,posix}): New functions.
1492 (display_file, print_symbols): Call them.
1494 * ar.c: Improve error messages.
1496 * nm.c (main): Handle long options that just set a flag.
1498 * nm.c (main), ar.c (do_show_version), objcopy.c (main), size.c
1499 (main): Exit after printing the version number, per the GNU coding
1502 Mon May 17 13:20:25 1993 Per Bothner (bothner@cygnus.com)
1504 * README, Makefile.in: Minor updates for 2.2.
1506 Fri May 14 11:12:26 1993 Per Bothner (bothner@cygnus.com)
1508 * Makefile.in (underscore.c): Automatically generate
1509 (using nm) a file with the variable prepends_underscore.
1510 * Makefile.in (c++filt): Link underscore.o with cplus-dem.o
1511 so that initial underscores get removed iff appropriate.
1512 * binutils.texi: Preliminary documentation for c++filt.
1513 * Makefile.in, binutils.texi: Set to version 2.2.
1515 * NEWS: Mention copy->objcopy renaming and new c++filt program.
1517 Wed May 12 12:05:36 1993 Ian Lance Taylor (ian@cygnus.com)
1519 * Makefile.in (cplus-dem.o, $(DEMANGLER_PROG)): Build the
1520 demangler via cplus-dem.o, rather than directly from the .c file.
1522 * objcopy.c: Renamed from copy.c, updated comments accordingly.
1523 * Makefile.in, binutils.texi: Renamed copy to objcopy.
1524 * is-strip.c, maybe-strip.c, not-strip.c: Updated comments for
1525 rename of copy to objcopy.
1527 Mon May 10 17:20:18 1993 Per Bothner (bothner@cygnus.com)
1529 * binutils.texi (strip, -v option): Fix typo.
1531 Fri May 7 13:57:50 1993 Ian Lance Taylor (ian@cygnus.com)
1533 * Makefile.in (RUNTEST): Define.
1534 (FLAGS_TO_PASS): Pass down RUNTEST.
1536 Tue May 4 10:06:50 1993 Ian Lance Taylor (ian@cygnus.com)
1538 * Makefile.in (DEMANGLER_PROG): Name it c++filt.
1539 (PROG): Also build and install COPY_PROG.
1541 Mon May 3 19:11:48 1993 Per Bothner (bothner@cygnus.com)
1543 * Makefile.in: Change definition of $(tooldir) to match FSF.
1545 Wed Apr 28 23:41:32 1993 David J. Mackenzie (djm@rtl.cygnus.com)
1547 * size.c (usage): Add missing options.
1548 (main): Clean up option parser.
1550 * objdump.c (usage): Add missing options.
1551 (display_file): Print program name before calling
1554 * nm.c (usage): Add missing options.
1555 (main): Clean up option parser.
1556 (display_file): Print program name before calling
1559 * copy.c (copy_usage, strip_usage): Add missing options.
1561 * ar.c (usage): New function.
1563 (open_inarch, do_quick_append): Print program name before calling
1566 Thu Apr 22 15:01:35 1993 Ian Lance Taylor (ian@cygnus.com)
1568 * nm.c (main): Accept and ignore -A and -B for MIPS compatibility.
1570 Mon Apr 19 14:06:59 1993 Rob Savoye (rob@cygnus.com)
1572 * Makefile.in: Added FLAGS_TO_PASS so tests get run on freshly
1573 built binaries if they exist. (otherwise the path)
1575 Wed Apr 7 22:22:50 1993 Rob Savoye (rob@cygnus.com)
1577 * Makefile.in: Changed check target to use DejaGnu.
1579 Thu Apr 1 12:37:13 1993 Jim Kingdon (kingdon@cygnus.com)
1581 * Makefile.in: Remove am29k-pinsn.c, i960-pinsn.c.
1582 objdump.c: a29k and i960 are `disassemble' not `print'.
1584 * objdump.c: Rename print_address to objdump_print_address
1585 and change parameters.
1586 (disassemble_data): Use objdump_print_address.
1588 Wed Mar 31 10:25:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1590 * objdump.c (disassemble_data): print_insn_sparc is now a
1591 `disassemble' not a `print'.
1592 Makefile.in: Remove sparc-pinsn.c (now in libopcodes.a).
1594 * objdump.c (disassemble_data): Use new read_memory_func stuff.
1596 Thu Mar 25 10:38:11 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1598 * objdump.c (fprintf): Declaration of variadic function had better
1599 be a prototype for ANSI C systems.
1601 Mon Mar 22 23:19:46 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1603 * Makefile.in: rename test-install to install-check
1605 Fri Mar 19 14:40:08 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1607 * objdump.c (disassemble_data): Add H8500.
1609 Fri Mar 19 10:56:51 1993 Jim Kingdon (kingdon@cygnus.com)
1611 * objdump.c (usage): Mention long options.
1613 Thu Mar 18 14:22:17 1993 Per Bothner (bothner@rtl.cygnus.com)
1615 * nm.c: Modify behavior of -o flag for archives to match
1616 BSD4.4 and Sunos 4: Prefix archive name before each line.
1618 * m68k-pinsn.c: Removed. Subsumed by ../opcodes/m68k-dis.c.
1619 * i386-pinsn.c: Removed. Subsumed by ../opcodes/i386-dis.c.
1620 * Makefile.in: Adjust accordingly.
1621 * objdump.c: Support new-style disassemblers (ones that use
1622 the interface of ../include/dis-asm.h).
1624 Thu Feb 25 15:57:00 1993 Per Bothner (bothner@rtl.cygnus.com)
1626 * Makefile.in: When making tar file, remove texinfo/*,
1627 except for texinfo/texinfo.tex.
1628 * ardup.c: Add extern declaration of strdup.
1629 * Makefile.in (testsuite): Add 'else true' since otherwise
1630 Ultrix /bin/sh complains.
1632 Wed Feb 24 19:44:18 1993 Per Bothner (bothner@rtl.cygnus.com)
1634 * Makefile.in: Set VERSION to 2.1.
1635 * README, NEWS: Updates.
1636 * nm.c: Add -v as a synonym for -V.
1638 Tue Feb 23 19:00:50 1993 Mike Werner (mtw@poseidon.cygnus.com)
1640 * configure.in: added testsuite to configdirs.
1641 * Makefile.in: added support for building testsuite.
1643 Mon Feb 22 22:52:10 1993 Per Bothner (bothner@rtl.cygnus.com)
1645 * objdump.c (disassemble_data): Print function names when
1646 given by bfd_find_nearest_line. If not - still print
1649 Mon Feb 22 07:54:03 1993 Mike Werner (mtw@poseidon.cygnus.com)
1651 * binutils/testsuite: made modifications to testcases, etc., to allow
1652 them to work properly given the reorganization of deja-gnu and the
1653 relocation of the testcases from deja-gnu to a "tool" subdirectory.
1655 Mon Feb 22 10:27:24 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1657 * objdump.c (dump_data): Free up section contents each time
1658 through the loop. Reported by minyard@bnr.ca.
1660 Sun Feb 21 10:55:55 1993 Mike Werner (mtw@poseidon.cygnus.com)
1662 * binutils/testsuite: Initial creation of binutils/testsuite.
1663 Migrated dejagnu testcases and support files for testing nm to
1664 binutils/testsuite from deja-gnu. These files were moved "as is"
1665 with no modifications. This migration is part of a major overhaul
1666 of dejagnu. The modifications to these testcases, etc., which
1667 will allow them to work with the new version of dejagnu will be
1668 made in a future update.
1670 Fri Feb 12 10:05:20 1993 Fred Fish (fnf@cygnus.com)
1672 * Makefile.in (LIBIBERTY_SRC_DIR, LIBIBERTY_BIN_DIR): New macros.
1673 * Makefile.in (LIBIBERTY): Use LIBIBERTY_BIN_DIR.
1674 * Makefile.in (DEMANGLER_PROG): New program to build. Add macro
1676 * Makefile.in (PROGS): Add DEMANGLER_PROG.
1678 Tue Jan 26 11:56:33 1993 Ian Lance Taylor (ian@cygnus.com)
1680 * copy.c, nm.c, objdump.c, size.c: Use new bfd_is_com_section
1681 macro rather than checking for equality to bfd_com_section.
1683 Fri Jan 8 15:50:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1685 * objdump.c (disassemble_data): Fix code to find first useless
1688 Thu Jan 7 13:13:31 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1690 * objdump.c (disassemble_data): Use mips_print_insn for MIPS.
1691 Don't core dump if bfd_find_nearest_line returns false.
1693 Wed Jan 6 17:14:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1695 * objdump.c (disassemble_data): know how to disassemble z8000s
1698 Wed Jan 6 15:16:27 1993 Per Bothner (bothner@cygnus.com)
1700 * arsup.h (interactive), bucomm.h (program_name): Prefix
1701 with 'extern', to avoid warnings from some compilers.
1703 Wed Jan 6 15:14:11 1993 Per Bothner (bothner@rtl.cygnus.com)
1705 * arparse.y: fix unnecessary shift/reduce
1707 Tue Dec 22 15:46:56 1992 Per Bothner (bothner@rtl.cygnus.com)
1709 * Makefile.in: Make check depend on all.
1710 * Makefile.in (distclean): Remove sysdep.h.
1711 * size.c: Use %u format where appropriate.
1712 * objdump.c: Standardize: L_SET -> SEEK_SET.
1713 * objdump.c: Use new macro bfd_asymbol_bfd.
1714 * configure.in: Allow std-host as the default ${mys_host}.
1716 Thu Dec 17 19:38:19 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1718 * Makefile.in: added dvi target, define and use TEXI2DVI
1720 Tue Dec 15 18:05:07 1992 Per Bothner (bothner@cygnus.com)
1722 * Makefile.in (dist): Fix permissions before release.
1723 * size.c: Use bfd_size_type (and long) where appropriate.
1724 * ar.c: Make writing a map the default, to be compatible
1725 with SYSV and Posix.2. Remove some bogus kludges that
1726 handled __.SYMDEF directly.
1729 Mon Nov 9 13:36:53 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1731 * Makefile.in: flex no longer needs the -S flag
1733 Sat Nov 7 15:06:13 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1735 * ar.c (extract_file): utime needs a pointer to a utimbuf
1737 * Makefile.in: handle -I includes better, adding $(BASEDIR)/bfd to
1738 the list (since some of the bfd/hosts/*.h files include other
1739 files from that directory)
1741 Fri Nov 6 00:12:51 1992 John Gilmore (gnu@cygnus.com)
1743 * i960-pinsn.c (MEM_MAX, MEM_SIZ): Set upper bound properly.
1745 Thu Nov 5 03:37:15 1992 John Gilmore (gnu@cygnus.com)
1747 Clean up some old BFD ansification macros.
1749 * arsup.h, bucomm.h, objdump.h: Remove EXFUN from binutils.
1750 It still remains as a local macro in gmalloc.c, which is derived
1751 from some other copy of GNU Malloc somewhere (FIXME).
1753 * ar.c, objdump.c, size.c: Replace EXFUN with PROTO. Make static
1755 * arsup.h: Declare extract_files.
1757 Mon Nov 2 12:42:11 1992 Ian Lance Taylor (ian@cygnus.com)
1759 * ar.c (extract_file): instead of checking USG: if POSIX_UTIME,
1760 use utime and utimbuf structure, otherwise if USE_UTIME use utime
1761 and array of two longs, otherwise use utimes.
1763 Thu Oct 15 13:57:35 1992 Per Bothner (bothner@cygnus.com)
1765 * binutils.tex: Document yesterday's changes to strip and copy.
1767 Wed Oct 14 13:22:14 1992 Per Bothner (bothner@cygnus.com)
1769 * copy.c: Re-do command-line parsing to use getopt_long().
1770 Add long option names. Re-think option letters to be more
1772 * copy.c: New function filter_symbols() for stripping only
1773 debug-symbols and/or local symbols. Use these to support
1774 the previously-missing options of the old FSF strip.
1776 Tue Oct 13 01:24:20 1992 John Gilmore (gnu@cygnus.com)
1778 * configure.in (host): Use ${srcdir}/../bfd/configure.host rather
1779 than repeating a copy of it here.
1781 Wed Oct 7 12:53:52 1992 Ken Raeburn (raeburn@cygnus.com)
1783 * copy.c (main): Even if is_strip, accept -d argument indicating
1784 alternate output format. Needed by gdb for Nindy.
1786 * m68k-pinsn.c (print_insn_arg): Handle new "`" operand type.
1788 Tue Oct 6 16:33:56 1992 Jeffrey Osier (jeffrey@cygnus.com)
1790 * binutils.texi: added documentation for "copy"
1792 Tue Oct 6 14:22:56 1992 Per Bothner (bothner at PersSony)
1794 * Makefile.in (*clean rules): Some cleaning up.
1795 * Makefile.in (dist): Make diststuff in gprof for a dist.
1797 * ar.c (do_show_version): New function.
1798 * ar.c (main): Fix so "ar -V" works.
1800 Thu Oct 1 22:44:45 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1802 * configure.in: now uses the cpu-vendor-os triple instead of
1805 Fri Sep 25 22:41:08 1992 John Gilmore (gnu@cygnus.com)
1807 * i960-pinsn.c: Change bzero to memset.
1808 * sparc-pinsn.c: Change index to strchr.
1810 Mon Sep 21 14:39:56 1992 Ian Lance Taylor (ian@cygnus.com)
1812 * m68k-pinsn (print_insn_arg, fetch_arg): added support for
1813 operands to memory management instructions, from WRS.
1815 Tue Sep 15 15:26:38 1992 Ian Lance Taylor (ian@cygnus.com)
1817 * Makefile.in (install): if $(tooldir) exists, install nm and
1818 strip in $(tooldir)/bin.
1820 Thu Sep 3 11:57:40 1992 Per Bothner (bothner@rtl.cygnus.com)
1822 * Makefile.in: Let's call it version 2.0.
1824 Wed Sep 2 00:25:13 1992 Per Bothner (bothner@rtl.cygnus.com)
1826 * Makefile.in: Bump to version 0.98.
1827 * TODO, README: Minor updates.
1829 * Makefile.in: Added mostlyclean, distclean rules,
1830 and cleaned up clean, realclean.
1832 Sun Aug 30 21:18:59 1992 Ian Lance Taylor (ian@cygnus.com)
1834 * Makefile.in: map program names through program_transform_name
1837 Sun Aug 30 18:09:03 1992 Per Bothner (bothner@rtl.cygnus.com)
1839 * Makefile.in: Bump to versions 1.97.90.
1840 * cplus-dem.c: Removed. Was nowhere used - and if some
1841 programs are changed to to demangling should now use the
1842 versions in libiberty.
1844 Thu Aug 27 12:58:09 1992 Brendan Kehoe (brendan@cygnus.com)
1846 * configure.in: add we32k
1848 Mon Aug 24 14:53:42 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1850 * ar.c (map_over_members): if the element of the archive has a
1851 null name, fill it in.
1853 * nm.c (do_one_rel_file): only warn if a bfd's flags say there
1854 will be symbols and there aren't any.
1856 Wed Aug 19 11:20:25 1992 Ian Lance Taylor (ian@cygnus.com)
1858 * m68k-pinsn.c: handle new operand type 'r', introduced for cas2.
1860 Tue Aug 18 20:45:48 1992 Rob Savoye (rob@cygnus.com)
1862 * nm.c objdump.c: Added support for a +version (-V)
1863 to print the version number.
1865 * ar.c, copy.c: Added support for a -V option to print
1868 Tue Aug 18 13:28:44 1992 Ian Lance Taylor (ian@cygnus.com)
1870 * config/mh-apollo68v: removed -g from CC definition.
1872 * Makefile.in: always create installation directories.
1874 Mon Aug 17 18:33:41 1992 Per Bothner (bothner@rtl.cygnus.com)
1876 * m68k-pinsn.c: Minor fix in style of output (don't use
1877 range to indicate floating point control registers).
1879 Tue Aug 11 23:42:21 1992 Per Bothner (bothner@cygnus.com)
1881 * ar.c (main): Don't *always* set the verbose flag!
1883 Wed Aug 5 11:25:27 1992 Per Bothner (bothner@rtl.cygnus.com)
1885 * copy.c: When is_strip (because it is invoked as the strip
1886 program), follow traditional argv processing:
1887 'strip file1 file2' now strips file1 and file2, rather
1888 than stripping file1 (as input), leaving output in file2.
1890 Mon Jul 27 16:28:08 1992 Per Bothner (bothner@rtl.cygnus.com)
1892 * objdump.c (display_info, display_info_table): Call
1893 bfd_set_format() on dummy bfd before using it (twice).
1894 * ar.c: Make sure archive is created on command 'r'
1895 even when no elements are inserted. (Clean up and
1896 simplify some non-working related code.)
1898 Mon Jul 20 02:48:38 1992 D. V. Henkel-Wallace (gumby@cygnus.com)
1900 * configure.in: hppa support doesn't assume hp OS (from sef).
1902 Sat Jul 18 14:35:22 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1904 * configure.in: recognize hppa hosts (bsd & hpux), error messages
1905 to stderr, not stdout
1907 Fri Jul 17 18:39:44 1992 K. Richard Pixley (rich@rtl.cygnus.com)
1909 * ar.1, binutils.texi, i960-pinsn.c, nm.1, objdump.1, ranlib.1,
1910 size.1, sparc-pinsn.c, strip.1: removed rcsid's.
1912 Thu Jul 16 16:55:24 1992 K. Richard Pixley (rich@rtl.cygnus.com)
1914 * Makefile.dos: removed rcsid.
1916 Thu Jul 16 08:23:07 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1918 * objdump.c (display_bfd): print state of BFD_IS_RELAXABLE too
1920 Tue Jun 30 20:26:15 1992 D. V. Henkel-Wallace (gumby@cygnus.com)
1922 * Makefile.in: Add program_suffix (parallel to program_prefix)
1924 Thu Jun 25 04:52:45 1992 John Gilmore (gnu at cygnus.com)
1926 * nm.c (sorters): Lint. Remove excess whitespace.
1928 Wed Jun 24 13:48:07 1992 Per Bothner (bothner@cygnus.com)
1930 * nm.c (valueof macro): Add missing parentheses.
1931 (Their lack screwed up numeric_forward().)
1933 Sun Jun 14 10:33:27 1992 John Gilmore (gnu at cygnus.com)
1935 * objdump.c (dump_elf_stabs): Also dump .stab.index and
1936 .stab.excl sections.
1937 (dump_elf_stabs_1): Split out main body of old dump_elf_stabs.
1938 * objdump.1, binutils.texi: Document new sections dumped.
1940 Fri Jun 12 22:23:35 1992 John Gilmore (gnu at cygnus.com)
1942 * size.c, objdump.c, bucomm.c: Lint.
1944 Thu Jun 11 01:19:06 1992 John Gilmore (gnu at cygnus.com)
1946 * objdump.c (dump_elf_stabs): New feature: --stabs prints out a
1947 .stab section from an ELF file. Installed under #ifdef
1948 ELF_STAB_DISPLAY so it can be easily disabled, since it requires
1949 bfd-internals header files and such.
1950 * objdump.1, binutils.texi: Update for --stabs. Also fix
1951 objdump's doc to use -- rather than + for long options.
1952 (FIXME: Not yet fixed everywhere in binutils.texinfo.)
1954 Wed Jun 10 07:53:24 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1956 * objdump.c(display_info), patches from
1957 mohring@informatik.tu-muenchen.de to print the table much more
1960 Thu May 28 13:36:16 1992 Per Bothner (bothner@rtl.cygnus.com)
1962 * objdump.c: Add another enum->int cast, for the sake of
1963 old compilers (such as PCC).
1965 Wed May 27 13:01:44 1992 Per Bothner (bothner@rtl.cygnus.com)
1967 * arlex.l: Don't include <sysdep.h> (unneeded conflicts).
1968 Add declaration of strdup().
1970 Fri May 22 13:40:37 1992 Per Bothner (bothner@cygnus.com)
1972 * Makefile.in: Use srcdir instead of VPATH in ldgram/ldlex
1973 rules, since these are used when building a distribution.
1974 * Makefile.in (arlex.c): Don't re-direct output, since that
1975 leaves a bogus output files if it fails.
1977 * arlex.l: Make work with lex, for what it's worth.
1978 * Makefile.in: Better lex support.
1979 * Makefile.in (dist): Generate flex and bison outputs
1982 Thu May 14 17:17:59 1992 K. Richard Pixley (rich@rtl.cygnus.com)
1984 * Makefile.in: get BISON definition right.
1986 Fri May 8 07:47:08 1992 K. Richard Pixley (rich@cygnus.com)
1988 * sanity.sh: default TMPDIR to ".".
1990 Thu May 7 12:34:50 1992 Roland H. Pesch (pesch@fowanton.cygnus.com)
1992 * binutils.texi: add doc for ar command language.
1994 Wed May 6 18:05:36 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1996 * arparse.y: make END call ar_end
1997 * arsup.c (ar_end): added, deletes temp file if archive session
2001 Wed May 6 11:08:53 1992 K. Richard Pixley (rich@rtl.cygnus.com)
2003 * Makefile.in: use bison & flex from ../ if they exist. Also,
2006 * sanity.sh: remove temporary directory when finished.
2008 Tue May 5 12:00:58 1992 Per Bothner (bothner@rtl.cygnus.com)
2010 * Makefile.in: Bump to version 1.97.
2011 * ar.c: Declare errno for machines that need it.
2013 Mon May 4 23:29:51 1992 John Gilmore (gnu@cygnus.com)
2015 * objdump.c (display_info): Handle error cases without coredump.
2016 Close the dummy temporary file we open in the loop.
2017 * Makefile.in (arsup.o): Add kludge to build with Sun Make.
2019 Fri May 1 16:20:23 1992 K. Richard Pixley (rich@cygnus.com)
2021 * Makefile.in: added test-install target.
2023 * sanity.sh: new file.
2025 * Makefile.in: use sanity test on make check.
2027 Tue Apr 21 13:38:37 1992 K. Richard Pixley (rich@cygnus.com)
2029 * Makefile.in: rework CFLAGS so that they can be passed on the
2030 command line to make. Remove MINUS_G. Default CFLAGS to -g.
2032 Wed Apr 15 14:33:07 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2034 * arsup.c, arsup.h, arparse.y, arlex.l: support for archive
2037 Fri Mar 6 21:54:53 1992 K. Richard Pixley (rich@cygnus.com)
2039 * Makefile.in: added check target.
2041 Thu Mar 5 21:35:49 1992 K. Richard Pixley (rich@cygnus.com)
2043 * Makefile.in: added clean-info target.
2045 Tue Mar 3 15:36:37 1992 K. Richard Pixley (rich@rtl.cygnus.com)
2047 * Makefile.in: remove $(COPY_PROG) from PROGS. It shouldn't be
2048 installed. added tooldir and program_prefix.
2050 Wed Feb 26 18:04:40 1992 K. Richard Pixley (rich@cygnus.com)
2052 * Makefile.in, configure.in: removed traces of namesubdir,
2053 -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
2054 copyrights to '92, changed some from Cygnus to FSF.
2056 Sun Feb 16 12:53:02 1992 Per Bothner (bothner at cygnus.com)
2058 * Makefile.in: Bump version to 1.96, and remove -beta
2059 suffix from distribution name.
2060 * m68k-pinsn.c: New macro COERCE_SIGNED_CHAR to extract
2061 the signed value of a character (even if chars are unsigned).
2062 * sparc-pinsn.c: Add new operand types.
2064 Thu Feb 6 12:14:19 1992 Steve Chamberlain (sac at rtl.cygnus.com)
2066 * objdump.c (disassemble_data): don't print a section's contents
2067 if it's not loadable (eg bss)
2069 Tue Jan 28 11:11:06 1992 Steve Chamberlain (sac at rtl.cygnus.com)
2071 * m68k-pinsn.c (print_insn_arg): fixed so that -ve branch
2072 displacements don't get printed as large +ve ones.
2074 Fri Jan 24 14:47:53 1992 Steve Chamberlain (sac at rtl.cygnus.com)
2076 * copy.c, nm.c, objdump.c, size.c : changed to use the
2080 Mon Dec 30 18:34:41 1991 Per Bothner (bothner at cygnus.com)
2082 * bucomm.c (print_arelt_descr): Tweek the output format
2083 so that 'ar tv' output follows Posix 1003.2/D11.
2084 Output is now also identical to Sun's (except __.SYMDEF).
2086 Mon Dec 30 06:09:53 1991 John Gilmore (gnu at cygnus.com)
2088 * Makefile.in: Make `make' output more readable.
2090 Wed Dec 18 15:04:45 1991 Per Bothner (bothner at cygnus.com)
2092 * Makefile.in: Bump to version 1.94.
2094 Wed Dec 11 16:48:09 1991 Steve Chamberlain (sac at cygnus.com)
2096 * ar.c: added "b" to fopens for dos
2097 * configdj.bat, makefile.dos new files from DJ
2099 Tue Dec 10 04:07:26 1991 K. Richard Pixley (rich at rtl.cygnus.com)
2101 * Makefile.in: infodir belongs in datadir.
2103 Sat Dec 7 17:09:37 1991 Steve Chamberlain (sac at rtl.cygnus.com)
2105 * bucomm.h: created to hold prototypes of bucomm.c
2106 * objdump.h: created to hold prototyes of objdump.c
2107 * am29k-pinsn.c: include objdump.h
2108 * ar.c: include bucomm.h, get ar.h from the right place and
2110 * bucomm.c: defunize bfd_fatal
2111 * copy.c: include bucomm.h, lint.
2112 * i960-pinsn.h: include bucomm.h
2113 * m68k-pinsn.h: lint
2114 * nm.c: include bucomm.h, lint
2116 * sparc-pinsn.c: include objdump.h
2120 Fri Dec 6 23:02:14 1991 K. Richard Pixley (rich at rtl.cygnus.com)
2122 * Makefile.in: added standards.text support. install using
2123 INSTALL_PROGRAM and INSTALL_DATA.
2125 * configure.in: configure now does all of it's work from objdir so
2126 make file existence tests against ${srcdir}.
2128 Thu Dec 5 22:46:22 1991 K. Richard Pixley (rich at rtl.cygnus.com)
2130 * Makefile.in: idestdir and ddestdir go away. Added copyrights
2131 and shift gpl to v2. Added ChangeLog if it didn't exist. docdir
2132 and mandir now keyed off datadir by default.
2134 Wed Dec 4 22:42:03 1991 Per Bothner (bothner at cygnus.com)
2136 * Makefile.in: Bump to version 1.93.
2137 * Makefile.in: Add make-strip.o:maybe-strip.c dependency
2138 for make versions that provide half-baked VPATH-support (e.g. Sun's).
2139 * size.c: Improvements suggested by
2140 "david d [zoo] zuhn" <zoo@aps1.spa.umn.edu>:
2141 - Don't emit (Berkeley) headers if no files were found.
2142 - Return a non-zero return code on failure.
2144 Sat Nov 30 21:34:19 1991 Steve Chamberlain (sac at rtl.cygnus.com)
2146 Changes due to include file renaming:
2147 * am29k-pinsn.c: a29k-opcode.h -> opcode/a29k.h
2148 * sparc-pinsn.c: sparc-opcode.h -> opcode/sparc.h
2149 * m68k-pinsn.c: m68k-opcode.h -> opcode/m68k.h
2150 * nm.c: stab.gnu.h -> aout/stab_gnu.h
2152 Tue Nov 19 19:20:43 1991 Per Bothner (bothner at cygnus.com)
2154 * README: Mention MINIMIZE flag for bfd's make.
2156 Mon Nov 18 12:05:37 1991 Per Bothner (bothner at cygnus.com)
2158 * README: Various improvements.
2160 Sun Nov 17 23:40:59 1991 Per Bothner (bothner at cygnus.com)
2162 * Makefile.in: Bump to version 1.92.
2163 * version.c, Makefile.in: Get version string from Makefile.
2164 * copy.c, is-strip.c, not-strip.c, maybe-strip.c, Makefile.in:
2165 Make the same change that we earlier did for ar/ranlib:
2166 Generate two different binaries for strip and copy and use
2167 a global variable with different values to distinguish
2168 ostrip from copy. (-1 means to use argv[0] to decide,
2169 so you can get the old behavior, but it is no longer the default).
2170 * copy.c (copy_file): Set EXEC_P of output bfd if input is so.
2171 * copy.c (main): If is_strip==-1, compare last 5 chars
2172 of argv[0], not the whole path.
2173 * copy.c (main): Return 0, not 1.
2174 * copy.c (setup_sections): Fix due to change in bfd_make_section
2175 now failing if asked for a duplicate section.
2176 * strip.c, ostrip.c: Removed obsolete files.
2177 * ar.c, not-ranlib.c, maybe-ranlib.c:
2178 Change encoding of is_ranlib variable to be consistent
2179 with is_strip for strip.copy (i.e -1 to means use argv[0]).
2181 Thu Nov 14 20:11:02 1991 Per Bothner (bothner at cygnus.com)
2183 * version.c (program_version): Update to version 1.92.
2185 Tue Nov 12 16:17:53 1991 Per Bothner (bothner at cygnus.com)
2187 * ar.c (get_pos_bfd): Previous fix was missing a "break".
2189 Thu Nov 7 08:55:56 1991 Steve Chamberlain (sac at cygnus.com)
2191 * am29k-pinsn.c: Fixed bug in mtacc, dmac and fmac instruction
2192 encodings. (Thaks to David Wood)
2194 Sun Nov 3 14:50:23 1991 Per Bothner (bothner at cygnus.com)
2196 * Makefile.in ($(DIST_NAME).tar.Z), TODO: Various fixes.
2197 * ar.c (get_pos_bfd): Fix to handling of before/after
2198 positioning options.
2199 * bucomm.c (fatal): MISSING_VFPRINTF is no longer an issue,
2200 since libiberty contains vfprintf etc if otherwise missing.
2201 * m68k-pinsn.c (print_insn_arg): Support BB/BW/BL
2202 type operands, as used by branch instructions.
2203 * nm.c: Delegate printing of symbols to BFD,
2204 by using bfd_print_symbol to do the formatting.
2206 Mon Oct 28 11:20:47 1991 Steve Chamberlain (steve at cygnus.com)
2208 * ar.c (write_archive.c): added unlink before rename since some
2209 systems can't rename onto an existant file.
2211 Mon Oct 21 09:47:23 1991 Steve Chamberlain (steve at rtl.cygnus.com)
2213 * nm.c: now doesn't crash if a symbol with no section and no
2216 Thu Oct 17 15:25:50 1991 Per Bothner (bothner at cygnus.com)
2218 * Makefile.in, version.c: Bump to version 1.91.
2220 Wed Oct 16 11:45:36 1991 Per Bothner (bothner at cygnus.com)
2222 * Makefile.in, ar.c, bucomm.c, copy.c, cplus-dem.c, filemode.c,
2223 i960-pinsn.c, m68k-pinsn.c, nm.c, objdump.c, size.c, sparc-pinsn.c,
2224 * strip.c: Add or update Copyright notice.
2225 * TODO: Add note on 'nm -a'.
2226 * version.c: Update version number to 1.90.
2227 * Makefile.in: Fix making of documentation for dist.
2229 Tue Oct 15 00:17:17 1991 Per Bothner (bothner at cygnus.com)
2232 * Makefile.in: New kludgy rules for making a tarfile.
2233 * Makefile.in: Fix bindir path.
2235 Mon Oct 14 17:34:29 1991 Roland H. Pesch (pesch at cygnus.com)
2237 * Makefile.in: add targets binutils.mm, binutils.me
2239 Fri Oct 11 22:44:21 1991 John Gilmore (gnu at cygnus.com)
2241 * Makefile.in: Avoid Sun Make VPATH bugs by adding dependencies.
2243 Fri Oct 11 12:51:33 1991 Roland H. Pesch (pesch at cygnus.com)
2245 * Makefile.in: add target "binutils.ms"
2247 * binutils.texinfo: minor restructuring for texi2roff comfort.
2249 Fri Oct 11 04:12:28 1991 John Gilmore (gnu at cygnus.com)
2251 Restructure configuration scheme for bfd, binutils, ld.
2253 * include/sys/h-*.h: Move to bfd/hosts/h-*.h.
2254 * configure.in: Revise to symlink sysdep.h to ../bfd/hosts/h-xxx.h.
2255 Change some config names to match other dirs.
2256 * *.c: Include bfd.h before sysdep.h, so ansidecl and PROTO()
2258 * Makefile.in: Use -I. to get sysdep.h.
2260 Wed Oct 9 22:42:56 1991 Per Bothner (bothner at cygnus.com)
2262 * nm.c (print_symbols): Handle NULL name field of symbol.
2263 * Makefile.in: Removed spurious comment.
2265 Tue Oct 8 16:55:03 1991 Roland H. Pesch (pesch at cygnus.com)
2267 * binutils.texinfo: minor typos, phrasing, formatting fixes.
2269 Tue Oct 8 15:13:20 1991 Per Bothner (bothner at cygnus.com)
2271 * configure.in: Get host file from ../bfd/config, not config.
2272 * config/*: Remove config directory and its files.
2274 Tue Oct 8 13:58:59 1991 Roland H. Pesch (pesch at cygnus.com)
2276 * Makefile.in: new targets binutils.dvi, binutils.info
2278 * binutils.texinfo: remove most remaining FIXME's, delete
2279 references to __.SYMDEF by name
2282 Tue Oct 8 10:23:44 1991 Steve Chamberlain (steve at cygnus.com)
2284 * objdump.c (print_address) Print addresses nicely.
2286 Mon Oct 7 11:31:05 1991 Per Bothner (bothner at cygnus.com)
2288 * ar.c, Makefile.in, new files {is,not,maybe}-ranlib.c:
2289 Make two different binaries for ar and ranlib, instead of
2290 distinguishing them at run time using argv[0].
2291 (Old behavior is still available if you "make ar_with_ranlib",
2292 but it is not the default.)
2293 * ranlib.sh (new): An alternative one-line
2294 shell implementation of ranlib.
2296 Fri Oct 4 21:49:44 1991 John Gilmore (gnu at cygnus.com)
2298 * objdump.c: Cope with renames of a few BFD types & enums.
2300 Fri Oct 4 19:08:09 1991 Roland H. Pesch (pesch at cygnus.com)
2302 * binutils.texinfo: add new file (rudimentary docn)
2304 Mon Sep 30 12:30:39 1991 Per Bothner (bothner at cygnus.com)
2306 * config/hmake-news: Add new file (for Sony NEWSOS3).
2307 * bucomm.c (fatal): Conditionally compile fatal() depending on
2308 MISSING_VFPRINTF, and don't confuse the issue with NO_VARARGS.
2309 * objdump.c (dump_headers): Trivial output format change.
2310 * objdump.c (display_info): Loop over integers, not enums,
2311 to appease old compilers.
2313 Mon May 20 16:14:07 1991 Steve Chamberlain (steve at cygint.cygnus.com)
2315 *objdump.c *nm.c *copy.c :hanged some types to work with 64 bit object files
2317 Thu May 16 16:06:55 1991 Steve Chamberlain (steve at cygint.cygnus.com)
2319 * objdump.c (print_address): Make disasembled output more
2320 consistent with gdb and as: Add 0x when printing hex.
2321 Don't print extra leading zeros.
2322 Attempt to not print "filename.o".
2323 * objdump.c: Add some enum-to-int casts to accomodate old compilers.
2326 Fri May 3 22:21:44 1991 John Gilmore (gnu at cygint.cygnus.com)
2328 * copy.c: Change =& constructs to = &, since they confuse older
2336 version-control: never