1 Wed Aug 10 10:19:55 1994 Stan Shebs (shebs@andros.cygnus.com)
3 * nlmconv.c (powerpc_mangle_relocs): Rename symvalue to sym_value,
4 so as not to conflict with the symvalue typedef in bfd.h.
6 Mon Aug 1 13:19:09 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
8 * nlmheader.y: Per current NetWare docs, accept a revision number
9 of 0 and treat a revision number greater than 26 as 0.
11 Mon Jul 25 12:58:36 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
13 * objdump.c (objdump_print_address): Correct handling of end of
14 symbols when looking for next symbol with a different value.
17 Fri Jul 22 16:48:34 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
19 * nm.c (numeric_forward): Treat undefined symbols as "less than"
20 defined symbols with zero values. If numeric values are equal, or
21 both symbols are undefined, sort alphabetically. Don't assume
22 that the difference of two bfd_vma values will truncate to "int"
23 and still have the same sign.
24 (numeric_reverse): Call numeric_forward and negate the result.
25 (print_symbol_info_bsd): For undefined symbols, print leading
26 spaces equivalent to the width of a printed bfd_vma, rather than
27 assuming that 8 will look right.
30 Fri Jul 22 10:36:50 1994 Steve Chamberlain (sac@jonny.cygnus.com)
32 * coffgrok.c (doit): Zero all fields of new structure.
33 * srconv.c (sysroff_swap_*_out): Remove redundant trailing arg.
34 * sysinfo.y: Generate sysroff_swap_*_out without requiring extra
37 Fri Jul 22 10:09:53 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
39 * nlmheader.y: Make "stack" and "stacksize" synonyms in the lexer
40 rather than the parser.
42 Thu Jul 21 10:25:09 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
44 * config/mh-alphaosf, config/mh-apollo68v, config/mh-delta88:
47 Sat Jul 16 22:34:39 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
49 * objdump.c (slurp_dynamic_symtab): Try to get the dynamic symbols
50 even if the bfd is not marked DYNAMIC. ELF executables are not
51 marked DYNAMIC, but do have dynamic symbols.
53 Fri Jul 15 01:41:35 1994 Steve Chamberlain (sac@jonny.cygnus.com)
55 * coffgrok.c (do_where): Make data with no type 'int'.
56 (do_define): Keep info on source file of a symbol.
57 * coffgrok.h (coff_symbol): New field.
58 * srconv.c (PROGRAM_VERSION): Now 1.3
59 (wr_rl): Use external ref number for symbol.
60 (wr_dus): Only keep one source file per debug unit.
61 (wr_dln): Always emit line numbers for first source file,
62 (wr_globals): Emit globals in the du of their owning source file.
64 Mon Jul 11 15:59:03 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
66 * nlmheader.y: Null terminate var_hdr->threadName.
68 Fri Jul 8 17:33:22 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
70 * Makefile.in (syslex.o, sysinfo.o): Permit C source files to be
71 in $(srcdir), as they will be for FSF releases.
73 Wed Jul 6 01:13:14 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
75 * nlmconv.c (setup_sections): Preserve existing section flags when
76 copying in flags from a new section.
78 Tue Jul 5 15:56:01 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
80 * objcopy.c: Include libiberty.h.
81 (copy_file): If output_target is NULL, set it to the target of the
84 Wed Jun 29 17:17:14 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
86 * nlmconv.c (link_inputs): Fixed memory allocation bug.
88 Thu Jun 23 12:52:46 1994 David J. Mackenzie (djm@rtl.cygnus.com)
90 * configure.in: Change --with-targets to --enable-targets.
92 Tue Jun 21 12:53:21 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
94 * Makefile.in (sysinfo): Does not depend upon $(ADDL_LIBS).
96 * nlmconv.c (powerpc_build_stubs): Don't generate the PowerPC
97 NetWare custom header; no longer needed.
98 (powerpc_mangle_relocs): Convert relocs against the uninitialized
99 data section into relocs against the data section.
101 * configure.in: Set nlmconv_defs to -DNLMCONV_cputype for all the
102 netware targets. Write it into Makefile as NLMCONV_DEFS.
103 * Makefile.in (nlmconv.o): Pass $(NLMCONV_DEFS) to $(CC).
104 * nlmconv.c: Only compile code for specific CPU types if
105 NLMCONV_cputype is defined.
107 * nlmconv.c (main): Change uses of bfd_abs_section, etc., to use
108 bfd_abs_section_ptr or bfd_is_abs_section, etc.
109 (i386_mangle_relocs, alpha_mangle_relocs): Likewise.
110 (powerpc_build_stubs): Likewise.
111 * nm.c (filter_symbols, print_symbols): Likewise.
112 * objcopy.c (filter_symbols): Likewise.
113 (mark_symbols_used_in_relocations): Likewise.
114 * objdump.c (remove_useless_symbols, dump_relocs): Likewise.
115 * size.c (sysv_internal_printer): Likewise.
117 Mon Jun 20 16:43:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
119 * Makefile.in (MANPAGES): Remove $(DEMANGLER_PROG).
120 (install): Install it explicitly, from build dir, not srcdir.
122 Mon Jun 20 16:29:54 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
124 * objdump.c: Don't include elf/internal.h.
125 (bfd_elf_find_section): Don't declare.
126 (read_section_stabs): No special handling for ELF. Always read
129 Thu Jun 16 17:25:20 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
131 * configure.in: Set UNDERSCORE in Makefile based on result of
132 invoking config.bfd with a second argument of ``_''.
133 * Makefile.in (underscore.c): Depend upon Makefile. Don't try to
134 run $(CC) and $(NM), just use $(UNDERSCORE). Create via temporary
136 (demangle.o): Remove target.
137 ($(NM_PROG)): Don't depend upon demangle.o, and don't link against
138 demangle.o. It's in libiberty anyhow.
139 (cplus-dem.o): Don't depend upon demangle.o.
140 * binutils.texi: Mention -n and --no-strip-underscores arguments
143 Wed Jun 15 12:10:31 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
145 * nm.c (long_options): Add --no-demangle to turn off --demangle,
146 and --no-cplus for Linux compatibility.
147 (usage): Mention --no-demangle.
148 * binutils.texi: Document --no-demangle.
150 Fri Jun 10 15:41:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
152 * nm.c: HOST_64_BIT was renamed to BFD_HOST_64_BIT.
154 * objcopy.c (copy_archive): Make the temporary directory in the
155 same directory as the output BFD, since we may not have write
156 permission on the current directory. Set the permissions of the
157 new directory to 0700, not 0777.
159 Mon Jun 6 21:36:43 1994 D. V. Henkel-Wallace (gumby@cygnus.com)
161 * configure.in: if this is an rs6000 (and we're not building for
162 any other bfd targets) then build only nm (collect needs it on
165 * Makefile.in: define TOOL_PROGS which the list of programes to
166 install in $tooldir -- replaces a hard-coded list.
168 Fri Jun 3 10:59:18 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
170 * objdump.c (display_target_list): Remove unused local ok.
172 Thu May 26 18:05:52 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
174 * config/mh-alphaosf (CFLAGS): Don't specify both -g and -O;
175 they're not compatible under native cc. Use -O1 instead.
177 * Makefile.in (VERSION): Updated to cygnus-2.4.1.
179 Changes from binutils-2.4 net release:
181 * Makefile.in (MANPAGES): Use $(DEMANGLER_PROG).
182 ($(DEMANGLER_PROG).1): Build from cxxfilt.man, using sed.
183 * cxxfilt.man: Renamed from c++filt.1, replaced "c++filt" with
184 magic token to be replaced by sed.
186 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
188 * configure.bat: update for latest makefile.in
190 Fri May 13 23:25:13 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
192 * bucomm.c: Check ANSI_PROTOTYPES rather than __STDC__.
194 Tue May 10 18:22:06 1994 Jason Molenda (crash@sendai.cygnus.com)
196 * objcopy.c (copy_section): Set section size correctly if using
199 Sat May 7 16:49:36 1994 Steve Chamberlain (sac@cygnus.com)
201 * Makefile.in: Add rule for sysinfo.h
203 Fri May 6 12:18:33 1994 Steve Chamberlain (sac@cygnus.com)
205 * Makefile.in (SRCONV_PROG): Define.
206 (PROGS): Use $(SRCONV_PROG) too.
208 Thu May 5 19:41:43 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
210 * Makefile.in (DISTSTUFF): Add sysinfo.c, syslex.c, in case
211 someone configures with `targets=all'.
212 (distclean): Remove y.*.
213 (syslex.o): Depend on sysinfo.h.
214 (sysinfo.c): Rename y.tab.h to sysinfo.h.
215 (install-info): Don't try to install into $(infodir)/$(srcdir).
216 * syslex.l: Include sysinfo.h, not y.tab.h.
218 Thu May 5 11:50:55 1994 Ken Raeburn (raeburn@kr-pc.cygnus.com)
220 * syslex.l (yywrap): Define as function if not defined as a macro.
222 * Makefile.in (objdump.o): Deleted special rule.
223 * configure.in: Don't bother building ARCHDEFS variable for
225 * objdump.c (ARCH_*): Deleted handling.
226 (disassemble_data): Call `disassembler' from opcodes library.
228 Thu May 5 13:28:42 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
230 * Makefile.in (install): Correct handling of $(tooldir) and
231 $(bindir) being on different devices.
233 Fri Apr 29 09:50:38 1994 Steve Chamberlain (sac@cygnus.com)
235 * sysdump.c (h8300, sh): Add declarations.
237 Wed Apr 27 11:25:18 1994 Steve Chamberlain (sac@cygnus.com)
239 * Makefile.in (syslex, sysinfo): Use CC_FOR_BUILD.
240 * coffdump.c, coffgroc.c, coffgrog.h, srconv.c, sysdump.c,
241 sysroff.info: Major changes.
243 Tue Apr 26 18:18:24 1994 Stan Shebs (shebs@andros.cygnus.com)
245 * objdump.c (print_section_stabs): Indicate the stab header symbol
246 more clearly, print numbers of unrecognized stab n_type values.
248 Tue Apr 26 16:22:55 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
250 * nlmconv.c (copy_sections): Copy arelent pointers, not arelents.
252 Mon Apr 25 16:14:32 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
254 * Makefile.in (distclean): Remove $(PROGS) and underscore.c.
256 Fri Apr 22 11:14:19 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
258 * nlmconv.c (setup_sections): Remove special handling of .reginfo
260 (copy_sections): Likewise.
261 (alpha_mangle_relocs): Use bfd_ecoff_get_gp_value rather than the
262 special ECOFF .reginfo section.
264 * objcopy.c (copy_object): Call bfd_copy_private_bfd_data after
265 copying everything else, to let it fiddle with the file in its
268 * objdump.c: Include libiberty.h.
269 (display_target_list): If a format fails, just go on to the next
270 one. Check return value of bfd_set_format.
271 (display_info_table): Likewise. Don't increment loop variable in
272 for loop test, since that skips the first element.
273 (display_target_tables): Rewrite loop for clarity. Ensure that it
274 always prints at least one element.
276 * nlmconv.c (main): Use CyGnUsEx rather than CyGnUsSeCs for
277 sections header. Rename from cygnus_sections to cygnus_ext.
279 Thu Apr 21 12:12:26 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
281 * objdump.c (_DUMMY_NAME_): Don't define.
282 (display_target_list): Use tmpnam to get a file name rather than
283 using _DUMMY_NAME_. Unlink it when done.
284 (display_info_table): Likewise.
286 * nlmconv.c (secsec): New static variable.
287 (main): Create .nlmsections section in output BFD. Store
288 information about it in sections header.
289 (setup_sections): Allocate space in sections header.
290 (copy_sections): Copy zero sized sections. Put information about
291 each section in the sections header.
293 Wed Apr 20 14:34:51 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
295 * nlmconv.c (powerpc_build_stubs): Take new outbfd argument.
296 Change caller. Create custom header for new PowerPC NetWare
299 * Makefile.in (nlmheader.o, nlmconv.o): Update dependencies.
300 * nlmconv.c: Include bfd.h and libiberty.h with "", not <>.
301 * nlmheader.y: Include bfd.h with "", not <>.
303 Wed Apr 13 10:52:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
305 * objdump.c: Do an ifdef on __GO32__, not unix.
307 Wed Apr 6 21:54:49 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
309 Added -D (--dynamic) option to nm and -T (--dynamic-syms) and -R
310 (--dynamic-reloc) arguments to objdump.
311 * nm.c (dynamic): New static variable.
312 (long_options): Added "dynamic".
313 (usage): Mention -D and --dynamic.
314 (main): Add D to getopt string. Handle -D by setting dynamic.
315 (display_rel_file): If dynamic is non-zero, read dynamic symbols
316 rather than normal symbols.
317 * nm.1: Updated for -D (--dynamic) option.
318 * objdump.c (dump_dynamic_symtab): New global variable.
319 (dump_dynamic_reloc_info): New global variable.
320 (dynsyms, dynsymcount): New global variables.
321 (usage): Mention -R, -T, --dynamic-syms and --dynamic-reloc.
322 (long_options): Added "dynamic-reloc" and "dynamic-syms".
323 (slurp_symtab): If no symbols, return rather than exit.
324 (slurp_dynamic_symtab): New function.
325 (display_bfd): Handle dump_dynamic_symtab and
326 dump_dynamic_reloc_info.
327 (dump_symbols): Take new dynamic argument, indicating whether to
328 display dynamic symbols.
329 (dump_relocs): Move most printing into dump_reloc_set.
330 (dump_dynamic_relocs): New function.
331 (dump_reloc_set): New function, extracted from dump_relocs.
332 (main): Add R and T to getopt string. Handle -T by setting
333 dump_dynamic_symtab and -R by setting dump_dynamic_reloc_info.
334 * objdump.1: Updated for -R (--dynamic-reloc) and -T
335 (--dynamic-syms) options.
336 * binutils.texi: Updated for new nm and objdump options.
338 Wed Mar 30 15:52:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
340 Update for recent BFD changes to symbol and reloc reading. Rename
341 all uses of get_symtab_upper_bound to bfd_get_symtab_upper_bound.
343 * coffgrok.c (symcount): Change to long.
344 (do_sections_p1): Check for error return from
345 bfd_get_reloc_upper_bound. Change relcount to long, and check for
346 error from bfd_canonicalize_reloc.
347 (coff_grok): Change storage to long. Check for error from
348 bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
349 * nlmconv.c (main): Change symcount, newsymalloc, newsymcount, and
350 i to long. Check for error from bfd_get_symtab_upper_bound and
351 bfd_canonicalize_symtab.
352 (copy_sections): Change reloc_size and reloc_count to long. Check
353 for error from bfd_get_reloc_upper_bound and
354 bfd_canonicalize_reloc.
355 (mangle_relocs, i386_mangle_relocs, alpha_mangle_relocs): Change
356 reloc_count_ptr argument to long *. Make corresponding changes to
357 variables loaded from *reloc_count_ptr.
358 * nm.c (display_rel_file): Change storage and symcount to long.
359 Check for errors from bfd_get_symtab_upper_bound and
360 bfd_canonicalize_symtab.
361 * objcopy.c (filter_symbols): Change symcount, src_count and
363 (copy_object): Change symcount to long. Pass another argument to
364 fprintf. Check for errors from bfd_get_symtab_upper_bound and
365 bfd_canonicalize_symtab.
366 (copy_section): Change relcount to long. Check for errors from
367 bfd_get_reloc_upper_bound and bfd_canonicalize_reloc.
368 (mark_symbols_used_in_relocations): Change relcount and i to long.
369 Check for errors form bfd_get_reloc_upper_bound and
370 bfd_canonicalize_reloc.
371 * objdump.c (storage): Remove global variable.
372 (symcount): Changed to long.
373 (slurp_symtab): New local variable storage. Check for errors from
374 bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
375 (remove_useless_symbols): Change return value and count to long.
376 (objdump_print_address): Change min, max, thisplace and i to long.
377 (disassemble_data): Change i to long.
378 (dump_symbols): Change count to long.
379 (dump_relocs): Change relcount to long. Check for errors from
380 bfd_ret_reloc_upper_bound and bfd_canonicalize_reloc.
381 (display_info_table): Add casts when passing LONGEST_ARCH for
384 Tue Mar 29 14:59:04 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
386 * nm.c (display_archive): Close each archive element after it has
388 * objdump.c (display_file): Likewise.
390 Mon Mar 28 13:04:08 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
392 * configure.in: Change error message to refer to bfd/config.bfd
393 rather than bfd/configure.in.
395 Sun Mar 27 16:23:39 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
397 * More fixes for object formats which allow multiple sections
399 * objcopy.c (setup_section): Make a new output section even if
400 one already exists with the given name.
401 (copy_section): Use isection->output_section rather than trying
402 to look the output section up by its (possibly non-unique) name.
404 * Makefile.in (install-info): Look for binutils.info in the
405 current directory, then in $(srcdir). Don't use $<.
407 Mon Mar 21 12:55:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
409 * objdump.c (objdump_print_address): Make static. Declare with
410 prototype. Change vardiff from int to bfd_signed_vma. Correct
411 binary search termination condition. When looking for same
412 section symbol in relocatable file, handle final symbol correctly.
414 Sun Mar 20 11:26:36 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
416 * Makefile.in: Avoid bug in hpux sed.
418 * objcopy.c: Changes to keep it from stripping symbols used
419 in output relocations.
420 (mark_symbols_used_in_relocations): New function. Mark symbols
421 used in output relocations with BSF_KEEP.
422 (filter_symbols): Do not strip symbols marked with BSF_KEEP.
423 (copy_object): Reorder actions. First setup sections, then
424 build the output symbol table, then copy the section contents.
426 Fri Mar 18 10:53:55 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
428 * ar.c (write_archive): Allocate space for the null byte. From
429 Robert Lipe <robertl@arnet.com>.
431 Thu Mar 17 16:20:28 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
433 * Makefile.in: Built nm.new and strip.new to avoid problems with
434 collect when . is in PATH.
435 (STRIP_PROG): Change from strip to strip.new.
436 (NM_PROG): Change from nm to nm.new.
437 (install): Remove the .new when installing.
439 Wed Mar 16 16:27:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
441 * nlmconv.c (powerpc_build_stubs): Set BSF_DYNAMIC flag for each
442 symbol for which we build a stub.
443 (powerpc_mangle_relocs): Only reset TOC pointer for a call to a
444 symbol with BSF_DYNAMIC flag set.
446 Tue Mar 15 23:04:13 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
448 * objcopy.c (filter_symbols): Use bfd_is_local_label to determine
449 if a symbol represents a compiler-generated local label.
450 (copy_object): Give the BFD backends a chance to copy any private
451 bfd data from the input BFD to the output BFD.
452 (setup_section): Give the BFD backends a chance to copy any private
453 section data from the input section to the output section.
455 Mon Mar 14 11:15:58 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
457 * objcopy.c (mangle_section): Delete unused function.
458 (setup_section): Set osection here instead of calling
459 mangle section to do it.
461 Mon Mar 14 12:11:01 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
463 * ar.c (write_archive): Close inarch before unlinking it.
465 Fri Mar 11 22:20:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
467 * nlmconv.c (main): For PowerPC, call powerpc_build_stubs and
468 powerpc_resolve_stubs. Use __GOT0, not __toc_start. Handle it if
469 the start and end symbols are not in the text section.
470 (struct powerpc_stub): New struct definition.
471 (powerpc_stubs, powerpc_stub_insns): New static variables.
472 (powerpc_initial_got_size): New static variable.
473 (powerpc_build_stubs): New function.
474 (powerpc_resolve_stubs): New function.
475 (powerpc_mangle_relocs): Clear extraneous data in .got section.
476 Rearrange reloc handling to handle ELF relocs that are not
477 partial_inplace. Resolve PC relative relocs.
479 Wed Mar 9 13:48:11 1994 Steve Chamberlain (sac@jonny.cygnus.com)
481 * ar.c (move_members): Fix it so that the abi positional modifiers
482 don't delete all archive members following the insert point.
484 Tue Mar 8 13:14:43 1994 Steve Chamberlain (sac@jonny.cygnus.com)
486 * coffgrok.[ch]: New files, understand coff objects.
487 * coffdump.c: Uses coffgrok to dump out the debug info of a coff
489 * sysroff.info: Description of a SYSROFF object file.
490 * sysinfo.y, syslex.l: Parse info file, generate a reader, writer,
491 header files and a printer.
492 * srconv.c: Uses coffgrok.c and sysroff.info to convert a coff
493 file to a SYSROFF file.
495 Sat Feb 26 13:35:26 1994 Stan Shebs (shebs@andros.cygnus.com)
497 * ar.c (do_quick_append): Pad with a genuine character 10,
498 rather than whatever '\n' might happen to be.
500 Tue Feb 22 18:25:52 1994 Ian Lance Taylor (ian@cygnus.com)
502 * nlmconv.c (main): Ignore debugging symbols when looking for
503 special symbols by name.
505 Sun Feb 20 18:47:42 1994 Ian Lance Taylor (ian@lisa.cygnus.com)
507 * nlmconv.c: Include libiberty.h.
509 Support for PowerPC NetWare.
510 * nlmconv.c (main): For PowerPC NetWare, automatically define the
511 special symbols __toc_start.
512 (select_output_format): Handle bfd_arch_powerpc.
513 (mangle_relocs): Likewise.
514 (powerpc_mangle_relocs): New function.
516 Thu Feb 17 09:28:23 1994 David J. Mackenzie (djm@thepub.cygnus.com)
518 * ar.c, bucomm.c, nlmconv.c, nm.c, objcopy.c, objdump.c,
519 size.c: Use bfd_get_error and bfd_set_error and new error names.
521 Fri Feb 11 15:54:51 1994 David J. Mackenzie (djm@thepub.cygnus.com)
523 * objcopy.c (strip_main, copy_main): Add missing 'break' in switch.
525 Mon Feb 7 19:45:52 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
527 * objdump.c (disassemble_data): Handle bfd_arch_powerpc.
529 Sun Feb 6 22:08:20 1994 David J. Mackenzie (djm@thepub.cygnus.com)
531 * strings.c objdump.c nlmconv.c objcopy.c nm.c ar.c size.c (main):
532 Call xmalloc_set_program_name.
534 Fri Feb 4 10:46:01 1994 David J. Mackenzie (djm@thepub.cygnus.com)
536 * objcopy.c (filter_bytes): Make MEMHUNK a char *, not PTR, so we
537 can do arithmetic on it.
539 Thu Feb 3 14:06:41 1994 David J. Mackenzie (djm@thepub.cygnus.com)
541 * objdump.c (dump_section_stabs, read_section_stabs,
542 print_section_stabs): Functions broken out of dump_stabs_1.
543 Free the stabs and strings when done with them.
545 Wed Feb 2 13:42:23 1994 David J. Mackenzie (djm@thepub.cygnus.com)
547 * nlmconv.c (main): Use bfd_get_flavour instead of struct member.
548 * ar.c (print_contents, extract_file), size.c
549 (print_berkeley_format, print_sysv_format): Use bfd_get_filename and
550 bfd_my_archive instead of dereferencing the structs directly.
552 * ar.c: Use bfd_fatal and bfd_nonfatal instead of bfd_perror and exit.
553 Indent. Remove DEFUNs.
555 * nlmconv.c (main), objcopy.c (copy_file): Print matching formats
557 * nm.c (display_file, display_archive), size.c (display_bfd):
559 Print matching formats if there is an ambiguous match. Use
560 bfd_nonfatal instead of hardcoded error message if nothing matches.
562 * arsup.c, ar.c, objdump.c: Use bfd_get_filename instead of
565 * nm.c (display_archive): New function, from code in display_file.
566 (display_rel_file): Renamed from do_one_rel_file.
569 (display_archive): New function from code in display_file.
570 (display_file): Check bfd_close error return.
572 * strings.c (strings_object_file): Check bfd_check_format
575 * strings.c, objdump.c, size.c: Use bfd_nonfatal instead of bfd_perror.
577 * bucomm.c: Delete references to exit_handler. It wasn't set
578 anywhere, and now that we're using the libiberty xmalloc, it
579 wouldn't always get called before exiting.
580 (list_matching_formats): Function moved from objdump.c.
581 * bucomm.h: Declare it.
583 * objdump.c (disassemble_data): Move some variable decls closer to
584 their use. Add some comments. Replace a nested block with a
587 Mon Jan 31 18:50:41 1994 Stan Shebs (shebs@andros.cygnus.com)
589 * objdump.c (display_target_list, display_info_table): Check that
590 the bfd of the dummy output file is not null.
592 Wed Jan 26 13:13:18 1994 David J. Mackenzie (djm@thepub.cygnus.com)
594 * objcopy.c (filter_bytes): New function.
595 (copy_section): Call it.
596 (copy_options, copy_usage, copy_main): Add --byte option to
597 activate it. Appropriate the -b option (which was an undocumented
598 synonym for -F) for it, also. Add --interleave, -i option for
600 (setup_section, copy_section, mangle_section): Renamed with no `s'
602 * objcopy.1, binutils.texi: Document the new options.
604 * objdump.c (display_target_tables, display_target_list):
605 New functions broken out of display_info.
606 Eliminate some magic constants. Use more meaningful variable names.
607 (dump_bfd_header): New function broken out of display_bfd.
608 (dump_section_header): New function broken out of dump_headers.
609 (remove_useless_symbols): Don't shadow global variable name with
611 (objdump_print_address): Fix backward test.
613 Tue Jan 25 19:40:54 1994 Stan Shebs (shebs@andros.cygnus.com)
615 * bucomm.c (print_arelt_descr): Change decl of `when' to time_t.
616 * objdump.h: Removed.
618 Mon Jan 24 13:29:02 1994 David J. Mackenzie (djm@thepub.cygnus.com)
620 * objdump.c (display_file): Remove call to list_matching_formats.
621 It would never be called.
622 (list_matching_formats): Take an arg giving the list of matching
624 (display_bfd): Pass the arg, and get it filled in by calling
625 bfd_check_format_matches instead of bfd_check_format.
626 (display_info, display_info_table): target_vector was renamed to
629 * binutils.texi (objdump): Note some limitations of -h section
632 Sat Jan 22 16:20:46 1994 Stan Shebs (shebs@andros.cygnus.com)
634 * Makefile.in (MALLOC): Set to emptiness by default.
635 (ALL_CFLAGS): Add and use.
636 (arparse.h): Make it depend on arparse.y.
637 * ar.c (libbfd.h): Don't require to be in ../bfd.
638 * objdump.c (comp): Rename to compare_symbols.
640 Fri Jan 21 20:22:30 1994 David J. Mackenzie (djm@thepub.cygnus.com)
642 * objdump.c (list_matching_formats): If the file format is ambiguous,
643 print the matching names so the user can choose one.
644 (display_bfd): Call it.
645 (display_file): Call it.
647 Fri Jan 21 19:17:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
649 * objdump.c (disassemble_data): Support bfd_arch_rs6000.
651 Mon Jan 17 13:57:25 1994 Stan Shebs (shebs@andros.cygnus.com)
653 * objdump.c (stab_name): Allocate dynamically.
654 (stab_print): Use pointers to strings instead of char arrays.
655 (dump_stabs): Change alloc and init of arrays appropriately.
656 (dump_stabs_1): Always decide whether to print stab_name or
657 the stab's type number, if unnamed.
659 Fri Jan 14 14:42:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
661 * objcopy.c (strip_main, copy_main): Don't clobber the input file
664 * nlmconv.c (main): Warn about an attempt to use a shared library
665 with uninitialized data.
667 * nlmconv.c (setup_sections): Make sure that we align the
668 output_offset of each input section appropriately.
670 Thu Jan 13 17:32:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
672 * objdump.c (dump_relocs): Don't crash if section name is NULL.
674 Tue Jan 11 19:46:33 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
676 * filemode.c (filemodestring): Commented out; not used.
677 (mode_string): Use POSIX definitions.
678 (ftypelet): Likewise.
679 (rwx): Removed; no longer used.
680 * bucomm.c: Include bucomm.h.
681 (bfd_nonfatal, bfd_fatal): Argument is const.
682 (fatal): Make __STDC__ version.
683 * bucomm.h (mode_string): Declare.
684 * Makefile.in (bucomm.o): Depend upon bucomm.h
686 Sun Jan 9 12:03:20 1994 Ken Raeburn (raeburn@rtl.cygnus.com)
688 * bucomm.c (xmalloc, xrealloc): Deleted.
689 * bucomm.h (xmalloc, xrealloc): Fix prototypes, to correspond to
690 libiberty version of functions.
692 Thu Jan 6 06:18:15 1994 David J. Mackenzie (djm@thepub.cygnus.com)
694 * binutils.texi: Add a chapter summarizing the ways to select
695 aspects of the target for each program.
697 * objdump.c (long_options, usage): Add long equivalents for all
698 remaining short options that lacked them.
699 * binutils.texi objdump.1: Document them.
701 * size.c (usage): Tweak usage message.
702 * size.1: Add missing `=' in examples.
704 * binutils.texi strip.1 objcopy.1 nlmconv.1 objcopy.c nlmconv.c:
705 Use "--target=bfdname" as the option to select the BFD target,
706 like nm and size already do.
707 Reserve "--format=format" for textual output selection options, but
708 for now keep old option names as obsolete for backward compatibility.
710 * strings.c (main, strings_object_file, usage): Add --target option.
711 * binutils.texi strings.1: Document it.
713 Sat Jan 1 13:58:24 1994 David J. Mackenzie (djm@thepub.cygnus.com)
715 * ar.c (main): Add \n in error message.
717 Thu Dec 23 12:23:11 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
720 * ar.c (main): Put parens around assignment used as truth value.
721 * objcopy.c (strip_main): Remove unused variables. Return 0.
722 (copy_main): Remove unused variables. Return 0.
723 * objdump.c (display_bfd): Declare return value as void.
724 (stab_print): Use "" instead of 0 to initialize array.
725 (dump_stabs_1): Print vma using printf_vma.
726 (display_info): Put parens around assignment used as truth value.
727 * strings.c (print_strings): Cast printf arguments.
729 * objcopy.c (copy_main): Use copy_options, not strip_options.
731 * nlmheader.y (command): Warn about illegal date values.
733 Wed Dec 15 11:18:03 1993 David J. MacKenzie (djm@frosty.eng.umd.edu)
735 * bucomm.c bucomm.h: Run through indent. De-ansidecl-ify.
736 (bfd_nonfatal): New function.
737 (bfd_fatal): Call it.
739 * objcopy.c (smart_rename): Do a copy if the dest file has
740 multiple hard links. Remove source file on successful copy.
741 Try to preserve mode and owner on successful rename.
743 * objcopy.c: Run through indent. Clean up a bit.
744 Make global variables static.
745 Make {input,output}_{target,filename}, show_version local
746 to various functions.
747 New global variable `status' for exit status.
748 (strip_main, copy_main): New functions with code from main.
749 (nonfatal): New macro. Use it globally instead of bfd_perror and
752 (copy_object): Call mangle_sections with bfd_map_over_sections.
753 (mangle_sections): Adjust for new calling convention.
755 Fri Dec 10 11:28:11 1993 Ian Lance Taylor (ian@deneb.cygnus.com)
757 * nlmheader.y (command): Accept MAP and FULLMAP without arguments.
758 * nlmconv.c (main): Change error message for MAP and FULLMAP.
760 Thu Dec 9 17:47:19 1993 Ian Lance Taylor (ian@deneb.cygnus.com)
762 * nlmconv.c (main): Warn about imported symbols that are not in
763 the IMPORT list even if the IMPORT keyword is not used.
765 * nlmconv.c (debug, unlink_on_exit): New static variables.
766 (long_options): Add "debug" and "linker".
767 (main): Handle -d and -l arguments. Make command line input and
768 output files optional. Parse the command file before opening the
769 BFD's, which requires storing more information in local variables.
770 If INPUT names multiple files, link them together. Use OUTPUT for
771 the output file name if not named on command line.
772 (show_usage): Changed for new options.
773 (link_inputs): New function to automatically invoke linker to
774 handle multiple INPUT files.
775 (choose_temp_base_try, choose_temp_base, pexecute): New functions,
776 mostly copied from gcc/gcc.c.
777 * nlmconv.h (input_files, output_file): Declare.
778 * nlmheader.y (input_files, output_file): Define.
779 (command): Support INPUT with a string_list argument. Support
781 (string_list): Renamed from module_list.
782 * Makefile.in (nlmconv.o): Define LD_NAME based on
783 program_transform_name.
785 Wed Dec 8 10:09:04 1993 Ian Lance Taylor (ian@deneb.cygnus.com)
787 * nlmheader.y (nlmheader_identify): New function. Use it to print
788 the program name just once, instead of with every error message.
790 Mon Dec 6 16:11:32 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
792 * nlmconv.c (long_options): Changed --header-info to --header-file
793 to match documentation and usage message.
795 Sun Dec 5 01:31:01 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
797 * objdump.c (dump_relocs): Avoid dereferencing a NULL sym_ptr_ptr
800 Thu Dec 2 16:00:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
802 * nlmconv.c (main): Change various types from bfd_size_type to
803 size_t, since they have to be arguments to fread and fwrite.
804 Change set from char * to unsigned char *.
805 (select_output_format): Make mach argument unsigned. Handle
807 (setup_sections): Don't copy the .reginfo section of an ECOFF
808 file. Call bfd_set_reloc to initialize the relocation fields.
809 (copy_sections): Don't copy the .reginfo section of an ECOFF file.
810 Combine all relocs for a section.
811 (mangle_relocs): Change type of relocs to permit specific
812 functions to change it. Call alpha_mangle_relocs for alpha,
813 default_mangle_relocs for other architectures.
814 (default_mangle_relocs): New function. Adjust the address of all
815 relocs by the output_offset.
816 (i386_mangle_relocs): Change type of relocs argument. Cast length
817 argument to memmove to size_t.
818 (alpha_mangle_relocs): New function.
820 Wed Nov 17 17:38:58 1993 Sean Eric Fagan (sef@cygnus.com)
822 * nlmconv.c (select_output_format): Use nlm32-sparc for
825 Wed Nov 17 14:41:35 1993 Jeffrey Osier (jeffrey@thepub.cygnus.com)
827 * nlmconv.1: added man page
828 * objcopy.1: fixed format errors
830 Wed Nov 17 12:03:41 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
832 * Makefile.in: Use CFLAGS as well as LDFLAGS when linking.
834 Wed Nov 17 04:50:55 1993 David J. Mackenzie (djm@thepub.cygnus.com)
836 * strings.1: Fix typo.
838 Mon Nov 15 12:03:20 1993 Ken Raeburn (raeburn@rtl.cygnus.com)
840 * Makefile.in (DISTSTUFF): Build "info".
841 (VERSION): Updated to cygnus-2.3.1; 2.3 has gone out.
843 Sun Nov 14 00:27:24 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
845 * objdump.c (dump_stabs): Handle stabs-in-som as implemented
846 by the new BFD SOM assembler.
848 Sat Nov 13 07:14:05 1993 David J. Mackenzie (djm@rtl.cygnus.com)
850 * ar.1 c++filt.1 nm.1 objcopy.1 objdump.1 ranlib.1 size.1
851 strings.1 strip.1: Replace \(em in NAME section with \- so
852 makewhatis can grok it.
854 Tue Nov 9 15:22:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
856 * nlmconv.c (i386_mangle_relocs): Adjust reloc address by
857 section output_offset.
859 Fri Nov 5 12:11:52 1993 Jeffrey Osier (jeffrey@thepub.cygnus.com)
861 * binutils.texi: added nlmconv chapter
863 Wed Nov 3 16:10:50 1993 Jeffrey Wheat (cassidy@cygnus.com)
865 * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS
867 Wed Nov 3 15:09:23 1993 Ken Raeburn (raeburn@rover.cygnus.com)
869 * Makefile.in (distclean): Don't get rid of dvi or info files.
871 Tue Nov 2 13:29:59 1993 David J. Mackenzie (djm@rtl.cygnus.com)
873 * objcopy.c (S_ISLNK): Define as 0 if there's no S_IFLNK.
875 Fri Oct 29 16:02:34 1993 David J. Mackenzie (djm@thepub.cygnus.com)
877 * binutils.texi: Move objcopy docs into alphabetical order.
879 * objdump.c: Use xmalloc instead of malloc.
881 Fri Oct 29 11:11:14 1993 Stan Shebs (shebs@rtl.cygnus.com)
883 * objdump.c (info): Rename to formats_info.
884 (dump_stabs_1): Better comments and formatting.
886 Thu Oct 28 19:43:16 1993 Stan Shebs (shebs@rtl.cygnus.com)
888 * ar.c (main): Always create the archive when quick appending,
889 even if no input files have been given.
891 Wed Oct 27 12:03:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
893 * nlmconv.c (main): Set sharedDebugRecordOffset and
894 sharedDebugRecordCount fields in extended header.
896 * nlmconv.c (main): Force moduleName field to upper case.
898 Mon Oct 25 16:45:42 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
900 * objcopy.c (main): Give a usage message if there are too many
903 Mon Oct 25 10:37:08 1993 Ken Raeburn (raeburn@rover.cygnus.com)
905 * Makefile.in (install-info): Rewrite to take advantage of VPATH,
906 so FSF distributions (with info files in $(srcdir)) install
908 (DISTSTUFF): Build nlmheader.c too.
910 Fri Oct 22 11:43:23 1993 Ken Raeburn (raeburn@rover.cygnus.com)
912 * ar.c (program_name): Don't define here.
913 * objdump.c: Include "bucomm.h".
914 (xmalloc): Don't declare here.
915 (program_name): Don't define here.
916 (program_version): Fixed type in declaration.
917 * size.c: Include "bucomm.h".
918 (program_name): Don't declare here.
920 Fri Oct 22 14:10:41 1993 Mark Eichin (eichin@cygnus.com)
922 * objdump.c (fprintf): hide declaration in FPRINTF_ALREADY_DECLARED
924 Fri Oct 1 12:43:00 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
926 * nlmconv.c (i386_mangle_relocs): Resolve and remove PC relative
927 relocs against defined symbols in the same section.
929 Thu Sep 30 16:46:26 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
931 * Makefile.in (binutils.dvi): use TEXIDIR to find texinfo.tex
933 Sat Sep 25 18:09:29 1993 David J. Mackenzie (djm@thepub.cygnus.com)
935 * objcopy.c (simple_copy, smart_rename): New functions.
938 Fri Sep 24 15:38:29 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
940 * Makefile.in (clean, distclean): Recurse into testsuite.
942 Thu Sep 23 01:05:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
944 * objcopy.c (setup_sections, copy_sections): If stripping, don't
945 copy SEC_DEBUGGING sections.
946 * objdump.c (dump_headers): Print SEC_DEBUGGING flag.
948 * objdump.c (usage): Mention --stabs.
950 * objcopy.c (copy_object): Copy all applicable file flags.
951 (copy_file): Don't copy EXEC_P specially here.
953 Mon Sep 20 19:28:57 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
955 * nlmconv.c (main): Adjust data section size to correspond to bss
956 alignment adjustment. Clear BSF_SECTION_SYM if symbol is moved to
957 a different section. Use time_t for time variable.
958 (setup_sections): Only put sections with contents in output NLM.
959 (i386_mangle_relocs): No symbols are common at this point. Add
960 casts to avoid warnings.
962 Fri Sep 10 11:00:40 1993 Stan Shebs (shebs@rtl.cygnus.com)
964 * objdump.c: Made the --stabs option work for stabs-in-coff.
965 (ELF_STAB_DISPLAY): Removed.
966 (dump_elf_stabs): Renamed to dump_stabs, changed to run for
967 any object file format.
968 (dump_elf_stabs_1): Renamed to dump_stabs_1, added calls to
969 generic BFD routines for non-ELF case, changed format of message
970 for no-section-found case.
971 (display_bfd): Always call dump_stabs if requested.
972 (dump_data): Call bfd_section_size to get section size.
974 Fri Sep 10 08:12:23 1993 David J. Mackenzie (djm@thepub.cygnus.com)
976 * Makefile.in (install): Don't put strings in tooldir/bin.
978 Mon Sep 6 15:39:04 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
980 * nlmconv.c (total_bss_size): Removed.
981 (main): Set the bss vma to always follow the data section. Move
982 symbols into new sections, and adjust values by output_offset.
983 (setup_sections): Don't copy all sections, but instead point all
984 text sections to .text, all data sections to .data, and all bss
986 (copy_sections): Adjust accordingly.
988 Thu Sep 2 12:34:03 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
990 Only build nlmconv if configured for a NetWare target.
991 * configure.in: If we have some *-*-netware* target, or are using
992 all targets, set BUILD_NLMCONV to $(NLMCONV_PROG) in Makefile.
993 * Makefile.in (PROGS): Use $(BUILD_NLMCONV) rather than
996 Tue Aug 31 14:13:35 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
998 * objdump.c (ARCH_all): Define ARCH_hppa too.
999 (dump_headers): Don't test for SEC_BALIGN if it's not defined by
1002 Tue Aug 31 13:29:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1004 * nlmconv.c (main): Force creation of .bss section. Set up the
1005 sections before looking at the symbols. Move all common symbols
1006 into .bss section. Automatically define _edata and _end. Only
1007 export symbols in the export list, with multiple prefixes if
1008 necessary. Warn if no version. Always create extended header.
1009 Set date automatically if not already set.
1010 (setup_sections): Count size of bss sections.
1011 (mangle_relocs, i386_mangle_relocs): Accept section argument, and
1012 take reloc_count as a changeable pointer; changed callers.
1013 (i386_mangle_relocs): Remove PC relative relocs within a section,
1014 as they require no adjustment.
1015 * nlmheader.y: Fixed memory allocation throughout: token STRING is
1016 now allocated on the heap, and freed if not needed. Null
1017 terminated copyright message. Accept version with only two
1019 (symbol_list_opt): New nonterminal, either symbol_list or empty.
1020 (symbol_list): Use left recursion to avoid overflowing parser
1022 (yylex): Rearranged beginning of line check. Accept quoted
1023 strings using single quotes. End generic argument at comment
1024 character or parentheses.
1025 (string_list_append): Fixed.
1026 (string_list_append1): New function.
1028 * bucomm.h: The first argument to xrealloc is PTR, not char *.
1029 * bucomm.c (xrealloc): Use PTR rather than char *.
1030 * Makefile.in (objdump.o): Depend upon config.status to notice
1031 --with-targets changes.
1032 (nlmconv.o): Depend upon bucomm.h.
1034 Tue Aug 17 09:46:01 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1036 * configure.in: Don't pass cpu to config.bfd.
1038 Thu Aug 12 16:43:04 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1040 * Makefile.in ($(NM_PROG)): Depend on demangle.o.
1041 (demangle.o): New target.
1042 (cplus-dem.o): Depend on it, to force compilation order when doing
1045 * nm.c (print_symbol_info_{bsd,sysv,posix}): Take a bfd arg.
1046 (struct output_fns print_symbol_info): Ditto.
1047 (long_options, usage, main): Add -C --demangle option.
1048 (print_symname): New function, demangling if requested.
1049 (print_symbols, print_symbol_info_{bsd,sysv,posix}): Use it.
1051 Wed Aug 11 22:57:23 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1053 * Makefile.in: Put CFLAGS last in compilation rules and omit from
1054 linking rules. Use ARCHDEFS to compile objdump.c.
1055 Update dependencies.
1056 * configure.in: Construct ARCHDEFS based on the BFD target makefile
1058 * objdump.c: Conditionalize calls to the print_insn_ARCH functions
1059 according to ARCHDEFS.
1061 Thu Aug 12 08:06:15 1993 Ian Lance Taylor (ian@cygnus.com)
1063 * ar.c: Removed obsolete and non-functional GNU960 code.
1065 Wed Aug 11 13:08:26 1993 Ian Lance Taylor (ian@cygnus.com)
1067 * size.c (berkeley_sum): New function.
1068 (bsssize, datasize, textsize): New global variables.
1069 (bss_section_name, data_section_name, text_section_name): Removed.
1070 (print_berkeley_format): Map berkeley_sum over all the sections,
1071 rather than only reporting sizes of specifically named sections.
1072 * Makefile.in ($(OBJDUMP_PROG)): Removed dependency on size.o.
1074 Tue Aug 10 10:46:01 1993 Ian Lance Taylor (ian@cygnus.com)
1076 * nlmconv.c, nlmconv.h, nlmheader.y: New files for program to
1077 convert object files into NetWare Loadable Modules.
1078 * Makefile.in (NLMCONV_PROG): New macro, define to be nlmconv.
1079 (PROGS): Add NLMCONV_PROG.
1080 (nlmheader.c, nlmheader.o, nlmconv.o, $(NLMCONV_PROG)): New
1083 Thu Aug 5 15:48:32 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com)
1085 * Makefile.in: define MAKEOVERRIDES to an empty string
1087 Wed Aug 4 17:08:08 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1089 * objcopy.c (copy_file): Make failures to process a file nonfatal.
1091 Mon Aug 2 11:28:23 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1093 * nm.c: Add -B option, like --format=bsd.
1095 Tue Jul 27 16:29:54 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1097 * objcopy.c (copy_file): If the file is neither an object nor an
1098 archive, give an error rather than returning success.
1100 Mon Jul 19 16:13:40 1993 Ken Raeburn (raeburn@rtl.cygnus.com)
1102 * objdump.c (objdump_print_address): Prefer non-local symbols over
1103 local ones, and especially discriminate against debugging symbols.
1104 Also, for relocateable files, try to find a symbol in the current
1105 section, instead of picking one from some random section with a
1106 convenient value (read, section offset).
1107 (disassemble_data): Cast argument to malloc to size_t first.
1108 (dump_data): Likewise.
1109 (dump_relocs): If a single section name is specified, show relocs
1110 only for that section. Otherwise, silently omit sections without
1111 relocs. Format table nicely even if values are printed using 16
1112 digits instead of 8.
1114 Fri Jul 16 15:19:59 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1116 * nm.c: Changes for final version of POSIX.2.
1117 (print_symbol_filename_{bsd,sysv,posix}): New functions.
1118 (formats): Add an element for a pointer to them.
1119 (print_symbols): Call it.
1120 (print_object_filename_posix, print_archive_member_posix): Produce
1121 output according to new POSIX.2 spec.
1123 * strings.c (print_strings): Handle STREAM being NULL.
1124 (strings_a_section): Pass a NULL.
1125 (main): Don't open /dev/null.
1127 Thu Jul 15 12:44:09 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1129 * objdump.c (disassemble_data): Handle the m88k.
1130 (display_bfd): Use bfd_errmsg, rather than just claiming that the
1131 bfd is not an object file.
1133 Mon Jul 12 17:55:34 1993 K. Richard Pixley (rich@cygnus.com)
1135 * Makefile.in (TAGS): make work again by naming directories
1136 explicitly rather than depending on undefined macros.
1137 (INSTALL_XFORM): correct bad install target.
1139 Fri Jul 2 16:58:34 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1141 * strings.c: Doc fixes.
1143 Sun Jun 27 13:35:24 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1145 * Makefile.in: Note dependencies on bucomm.h.
1146 (cplus-dem.o): Link c++filt with version.o.
1148 * strings.c: Include bucomm.h and add prototypes to other decls.
1151 * bucomm.h: Declare xrealloc.
1153 * nm.c, objcopy.c, objdump.c, size.c, strings.c (main, usage): Add
1154 --help option. Put "GNU" in the version message.
1155 (usage): Take stream and exit status as args.
1156 (main): Pass new args to usage.
1158 Fri Jun 25 23:12:12 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1160 * strings.c, strings.1: New files.
1161 * binutils.texi: Document strings.
1162 * Makefile.in: Add rules for it.
1164 Fri Jun 25 20:44:43 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1166 * objdump.c: Use size-independent bfd elf section names.
1168 Sun Jun 20 23:09:06 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1170 * objdump.c (objdump_print_address): Handle wide offsets by
1171 calling sprintf_vma.
1173 Fri Jun 18 14:29:12 1993 Per Bothner (bothner@deneb.cygnus.com)
1175 * objdump.c (syms2): Removed unused variable.
1176 * objdump.c (remove_useless_symbols): New function.
1177 * objdump.c (comp): Simplify.
1178 * objdump.c (dis-assemble_data): Make simpler and more
1179 efficient how we filter out useless symbols: Just filter
1180 BEFORE the sort (using remove_useless_symbols).
1181 * objdump.c (objdump_print_address): Simplify.
1182 Change output syntax to match gdb.
1184 Thu Jun 17 16:53:56 1993 david d `zoo' zuhn (zoo@cygnus.com)
1186 * Makefile.in: canonicalize install.sh; for use within
1187 this directory (and subdirs)
1189 Mon Jun 14 12:13:22 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
1191 * Makefile.in (install, install-info): remove parentdir support,
1192 use INSTALL_XFORM; define INSTALL_XFORM
1194 Thu Jun 10 17:29:21 1993 Per Bothner (bothner@cygnus.com)
1196 * objcopy.c (copy_object): Fix bad size passed to xmalloc().
1198 Mon Jun 7 12:41:12 1993 Per Bothner (bothner@rtl.cygnus.com)
1200 * Makefile.in (INCLUDES): Add -I../bfd for sysdep.h and bfd.h.
1201 * configure.in: No longer need to configure to get sysdep.h.
1202 * objcopy.c (copy_object): Fix symbol table handling.
1204 Fri Jun 4 17:20:03 1993 Per Bothner (bothner@cygnus.com)
1206 * objcopy.c (filter_symbols): Cannot filter the symbols
1207 in place, because that confuses the relocs, so take separate
1208 parameter for output array.
1209 * objcopy.c (sympp): Make two variables: isympp and osympp.
1210 * objcopy.c (copy_object): Allocate separate array (osympp)
1211 for filtered symbols.
1213 Fri Jun 4 10:51:44 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1215 * Makefile.in: change recursion test to presence of a configured
1218 Thu Jun 3 14:05:57 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1220 * Makefile.in (underscore.c): Hack the backquoted command so it
1221 doesn't cause Solaris make to bomb.
1223 Thu Jun 3 10:40:19 1993 Jeffrey Osier (jeffrey@cygnus.com)
1225 * Makefile.in: added c++filt and objcopy to MANPAGES variable
1226 * .Sanitize: keep c++filt.1 and objcopy.1
1228 Thu Jun 3 00:32:52 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1230 * Makefile.in: rename LOADLIBES to EXTRALIBS
1232 Wed Jun 2 18:30:24 1993 Jeffrey Osier (jeffrey@cygnus.com)
1234 * c++filt.1, objcopy.1: new man pages
1236 Fri May 28 15:01:24 1993 Per Bothner (bothner@rtl.cygnus.com)
1238 * Makefile.in (install): Also install ar and ranlib in
1239 $(tooldir)/bin; needed for building libgcc.a.
1240 * objdump.c (objdump_print_address): Fix the check
1241 "coincidental" label matches by dis-allowing undefined
1244 Thu May 27 16:58:31 1993 Jeffrey Osier (jeffrey@cygnus.com)
1246 * biutils.texi: revised c++filt chapter
1248 Wed May 26 17:24:17 1993 Ian Lance Taylor (ian@cygnus.com)
1250 * Makefile.in (FLAGS_TO_PASS): Pass down CC and CFLAGS.
1252 Tue May 25 00:26:47 1993 Ken Raeburn (raeburn@cygnus.com)
1254 * objdump.c (slurp_symtab): Print warning for bad symbol table.
1255 (bfd_elf32_find_section, Elf32_Internal_Shdr): Updated
1256 declarations and uses.
1258 * Makefile.in (DISTSTUFF): Don't build binutils.mm.
1260 Fri May 21 10:51:19 1993 David J. Mackenzie (djm@rtl.cygnus.com)
1262 * nm.c: Add -f/--format, -P/--portability, -t/--radix options.
1263 Make global variables static.
1264 (main): Make -v like -n, not -V, and make -A like -o, for POSIX.2.
1265 (set_print_radix, set_output_format,
1266 print_{object_filename,archive_filename,archive_member,symbol_info}
1267 {bsd,sysv,posix}): New functions.
1268 (display_file, print_symbols): Call them.
1270 * ar.c: Improve error messages.
1272 * nm.c (main): Handle long options that just set a flag.
1274 * nm.c (main), ar.c (do_show_version), objcopy.c (main), size.c
1275 (main): Exit after printing the version number, per the GNU coding
1278 Mon May 17 13:20:25 1993 Per Bothner (bothner@cygnus.com)
1280 * README, Makefile.in: Minor updates for 2.2.
1282 Fri May 14 11:12:26 1993 Per Bothner (bothner@cygnus.com)
1284 * Makefile.in (underscore.c): Automatically generate
1285 (using nm) a file with the variable prepends_underscore.
1286 * Makefile.in (c++filt): Link underscore.o with cplus-dem.o
1287 so that initial underscores get removed iff appropriate.
1288 * binutils.texi: Preliminary documentation for c++filt.
1289 * Makefile.in, binutils.texi: Set to version 2.2.
1291 * NEWS: Mention copy->objcopy renaming and new c++filt program.
1293 Wed May 12 12:05:36 1993 Ian Lance Taylor (ian@cygnus.com)
1295 * Makefile.in (cplus-dem.o, $(DEMANGLER_PROG)): Build the
1296 demangler via cplus-dem.o, rather than directly from the .c file.
1298 * objcopy.c: Renamed from copy.c, updated comments accordingly.
1299 * Makefile.in, binutils.texi: Renamed copy to objcopy.
1300 * is-strip.c, maybe-strip.c, not-strip.c: Updated comments for
1301 rename of copy to objcopy.
1303 Mon May 10 17:20:18 1993 Per Bothner (bothner@cygnus.com)
1305 * binutils.texi (strip, -v option): Fix typo.
1307 Fri May 7 13:57:50 1993 Ian Lance Taylor (ian@cygnus.com)
1309 * Makefile.in (RUNTEST): Define.
1310 (FLAGS_TO_PASS): Pass down RUNTEST.
1312 Tue May 4 10:06:50 1993 Ian Lance Taylor (ian@cygnus.com)
1314 * Makefile.in (DEMANGLER_PROG): Name it c++filt.
1315 (PROG): Also build and install COPY_PROG.
1317 Mon May 3 19:11:48 1993 Per Bothner (bothner@cygnus.com)
1319 * Makefile.in: Change definition of $(tooldir) to match FSF.
1321 Wed Apr 28 23:41:32 1993 David J. Mackenzie (djm@rtl.cygnus.com)
1323 * size.c (usage): Add missing options.
1324 (main): Clean up option parser.
1326 * objdump.c (usage): Add missing options.
1327 (display_file): Print program name before calling
1330 * nm.c (usage): Add missing options.
1331 (main): Clean up option parser.
1332 (display_file): Print program name before calling
1335 * copy.c (copy_usage, strip_usage): Add missing options.
1337 * ar.c (usage): New function.
1339 (open_inarch, do_quick_append): Print program name before calling
1342 Thu Apr 22 15:01:35 1993 Ian Lance Taylor (ian@cygnus.com)
1344 * nm.c (main): Accept and ignore -A and -B for MIPS compatibility.
1346 Mon Apr 19 14:06:59 1993 Rob Savoye (rob@cygnus.com)
1348 * Makefile.in: Added FLAGS_TO_PASS so tests get run on freshly
1349 built binaries if they exist. (otherwise the path)
1351 Wed Apr 7 22:22:50 1993 Rob Savoye (rob@cygnus.com)
1353 * Makefile.in: Changed check target to use DejaGnu.
1355 Thu Apr 1 12:37:13 1993 Jim Kingdon (kingdon@cygnus.com)
1357 * Makefile.in: Remove am29k-pinsn.c, i960-pinsn.c.
1358 objdump.c: a29k and i960 are `disassemble' not `print'.
1360 * objdump.c: Rename print_address to objdump_print_address
1361 and change parameters.
1362 (disassemble_data): Use objdump_print_address.
1364 Wed Mar 31 10:25:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1366 * objdump.c (disassemble_data): print_insn_sparc is now a
1367 `disassemble' not a `print'.
1368 Makefile.in: Remove sparc-pinsn.c (now in libopcodes.a).
1370 * objdump.c (disassemble_data): Use new read_memory_func stuff.
1372 Thu Mar 25 10:38:11 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1374 * objdump.c (fprintf): Declaration of variadic function had better
1375 be a prototype for ANSI C systems.
1377 Mon Mar 22 23:19:46 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1379 * Makefile.in: rename test-install to install-check
1381 Fri Mar 19 14:40:08 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1383 * objdump.c (disassemble_data): Add H8500.
1385 Fri Mar 19 10:56:51 1993 Jim Kingdon (kingdon@cygnus.com)
1387 * objdump.c (usage): Mention long options.
1389 Thu Mar 18 14:22:17 1993 Per Bothner (bothner@rtl.cygnus.com)
1391 * nm.c: Modify behavior of -o flag for archives to match
1392 BSD4.4 and Sunos 4: Prefix archive name before each line.
1394 * m68k-pinsn.c: Removed. Subsumed by ../opcodes/m68k-dis.c.
1395 * i386-pinsn.c: Removed. Subsumed by ../opcodes/i386-dis.c.
1396 * Makefile.in: Adjust accordingly.
1397 * objdump.c: Support new-style disassemblers (ones that use
1398 the interface of ../include/dis-asm.h).
1400 Thu Feb 25 15:57:00 1993 Per Bothner (bothner@rtl.cygnus.com)
1402 * Makefile.in: When making tar file, remove texinfo/*,
1403 except for texinfo/texinfo.tex.
1404 * ardup.c: Add extern declaration of strdup.
1405 * Makefile.in (testsuite): Add 'else true' since otherwise
1406 Ultrix /bin/sh complains.
1408 Wed Feb 24 19:44:18 1993 Per Bothner (bothner@rtl.cygnus.com)
1410 * Makefile.in: Set VERSION to 2.1.
1411 * README, NEWS: Updates.
1412 * nm.c: Add -v as a synonym for -V.
1414 Tue Feb 23 19:00:50 1993 Mike Werner (mtw@poseidon.cygnus.com)
1416 * configure.in: added testsuite to configdirs.
1417 * Makefile.in: added support for building testsuite.
1419 Mon Feb 22 22:52:10 1993 Per Bothner (bothner@rtl.cygnus.com)
1421 * objdump.c (disassemble_data): Print function names when
1422 given by bfd_find_nearest_line. If not - still print
1425 Mon Feb 22 07:54:03 1993 Mike Werner (mtw@poseidon.cygnus.com)
1427 * binutils/testsuite: made modifications to testcases, etc., to allow
1428 them to work properly given the reorganization of deja-gnu and the
1429 relocation of the testcases from deja-gnu to a "tool" subdirectory.
1431 Mon Feb 22 10:27:24 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1433 * objdump.c (dump_data): Free up section contents each time
1434 through the loop. Reported by minyard@bnr.ca.
1436 Sun Feb 21 10:55:55 1993 Mike Werner (mtw@poseidon.cygnus.com)
1438 * binutils/testsuite: Initial creation of binutils/testsuite.
1439 Migrated dejagnu testcases and support files for testing nm to
1440 binutils/testsuite from deja-gnu. These files were moved "as is"
1441 with no modifications. This migration is part of a major overhaul
1442 of dejagnu. The modifications to these testcases, etc., which
1443 will allow them to work with the new version of dejagnu will be
1444 made in a future update.
1446 Fri Feb 12 10:05:20 1993 Fred Fish (fnf@cygnus.com)
1448 * Makefile.in (LIBIBERTY_SRC_DIR, LIBIBERTY_BIN_DIR): New macros.
1449 * Makefile.in (LIBIBERTY): Use LIBIBERTY_BIN_DIR.
1450 * Makefile.in (DEMANGLER_PROG): New program to build. Add macro
1452 * Makefile.in (PROGS): Add DEMANGLER_PROG.
1454 Tue Jan 26 11:56:33 1993 Ian Lance Taylor (ian@cygnus.com)
1456 * copy.c, nm.c, objdump.c, size.c: Use new bfd_is_com_section
1457 macro rather than checking for equality to bfd_com_section.
1459 Fri Jan 8 15:50:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1461 * objdump.c (disassemble_data): Fix code to find first useless
1464 Thu Jan 7 13:13:31 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1466 * objdump.c (disassemble_data): Use mips_print_insn for MIPS.
1467 Don't core dump if bfd_find_nearest_line returns false.
1469 Wed Jan 6 17:14:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1471 * objdump.c (disassemble_data): know how to disassemble z8000s
1474 Wed Jan 6 15:16:27 1993 Per Bothner (bothner@cygnus.com)
1476 * arsup.h (interactive), bucomm.h (program_name): Prefix
1477 with 'extern', to avoid warnings from some compilers.
1479 Wed Jan 6 15:14:11 1993 Per Bothner (bothner@rtl.cygnus.com)
1481 * arparse.y: fix unnecessary shift/reduce
1483 Tue Dec 22 15:46:56 1992 Per Bothner (bothner@rtl.cygnus.com)
1485 * Makefile.in: Make check depend on all.
1486 * Makefile.in (distclean): Remove sysdep.h.
1487 * size.c: Use %u format where appropriate.
1488 * objdump.c: Standardize: L_SET -> SEEK_SET.
1489 * objdump.c: Use new macro bfd_asymbol_bfd.
1490 * configure.in: Allow std-host as the default ${mys_host}.
1492 Thu Dec 17 19:38:19 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1494 * Makefile.in: added dvi target, define and use TEXI2DVI
1496 Tue Dec 15 18:05:07 1992 Per Bothner (bothner@cygnus.com)
1498 * Makefile.in (dist): Fix permissions before release.
1499 * size.c: Use bfd_size_type (and long) where appropriate.
1500 * ar.c: Make writing a map the default, to be compatible
1501 with SYSV and Posix.2. Remove some bogus kludges that
1502 handled __.SYMDEF directly.
1505 Mon Nov 9 13:36:53 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1507 * Makefile.in: flex no longer needs the -S flag
1509 Sat Nov 7 15:06:13 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1511 * ar.c (extract_file): utime needs a pointer to a utimbuf
1513 * Makefile.in: handle -I includes better, adding $(BASEDIR)/bfd to
1514 the list (since some of the bfd/hosts/*.h files include other
1515 files from that directory)
1517 Fri Nov 6 00:12:51 1992 John Gilmore (gnu@cygnus.com)
1519 * i960-pinsn.c (MEM_MAX, MEM_SIZ): Set upper bound properly.
1521 Thu Nov 5 03:37:15 1992 John Gilmore (gnu@cygnus.com)
1523 Clean up some old BFD ansification macros.
1525 * arsup.h, bucomm.h, objdump.h: Remove EXFUN from binutils.
1526 It still remains as a local macro in gmalloc.c, which is derived
1527 from some other copy of GNU Malloc somewhere (FIXME).
1529 * ar.c, objdump.c, size.c: Replace EXFUN with PROTO. Make static
1531 * arsup.h: Declare extract_files.
1533 Mon Nov 2 12:42:11 1992 Ian Lance Taylor (ian@cygnus.com)
1535 * ar.c (extract_file): instead of checking USG: if POSIX_UTIME,
1536 use utime and utimbuf structure, otherwise if USE_UTIME use utime
1537 and array of two longs, otherwise use utimes.
1539 Thu Oct 15 13:57:35 1992 Per Bothner (bothner@cygnus.com)
1541 * binutils.tex: Document yesterday's changes to strip and copy.
1543 Wed Oct 14 13:22:14 1992 Per Bothner (bothner@cygnus.com)
1545 * copy.c: Re-do command-line parsing to use getopt_long().
1546 Add long option names. Re-think option letters to be more
1548 * copy.c: New function filter_symbols() for stripping only
1549 debug-symbols and/or local symbols. Use these to support
1550 the previously-missing options of the old FSF strip.
1552 Tue Oct 13 01:24:20 1992 John Gilmore (gnu@cygnus.com)
1554 * configure.in (host): Use ${srcdir}/../bfd/configure.host rather
1555 than repeating a copy of it here.
1557 Wed Oct 7 12:53:52 1992 Ken Raeburn (raeburn@cygnus.com)
1559 * copy.c (main): Even if is_strip, accept -d argument indicating
1560 alternate output format. Needed by gdb for Nindy.
1562 * m68k-pinsn.c (print_insn_arg): Handle new "`" operand type.
1564 Tue Oct 6 16:33:56 1992 Jeffrey Osier (jeffrey@cygnus.com)
1566 * binutils.texi: added documentation for "copy"
1568 Tue Oct 6 14:22:56 1992 Per Bothner (bothner at PersSony)
1570 * Makefile.in (*clean rules): Some cleaning up.
1571 * Makefile.in (dist): Make diststuff in gprof for a dist.
1573 * ar.c (do_show_version): New function.
1574 * ar.c (main): Fix so "ar -V" works.
1576 Thu Oct 1 22:44:45 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1578 * configure.in: now uses the cpu-vendor-os triple instead of
1581 Fri Sep 25 22:41:08 1992 John Gilmore (gnu@cygnus.com)
1583 * i960-pinsn.c: Change bzero to memset.
1584 * sparc-pinsn.c: Change index to strchr.
1586 Mon Sep 21 14:39:56 1992 Ian Lance Taylor (ian@cygnus.com)
1588 * m68k-pinsn (print_insn_arg, fetch_arg): added support for
1589 operands to memory management instructions, from WRS.
1591 Tue Sep 15 15:26:38 1992 Ian Lance Taylor (ian@cygnus.com)
1593 * Makefile.in (install): if $(tooldir) exists, install nm and
1594 strip in $(tooldir)/bin.
1596 Thu Sep 3 11:57:40 1992 Per Bothner (bothner@rtl.cygnus.com)
1598 * Makefile.in: Let's call it version 2.0.
1600 Wed Sep 2 00:25:13 1992 Per Bothner (bothner@rtl.cygnus.com)
1602 * Makefile.in: Bump to version 0.98.
1603 * TODO, README: Minor updates.
1605 * Makefile.in: Added mostlyclean, distclean rules,
1606 and cleaned up clean, realclean.
1608 Sun Aug 30 21:18:59 1992 Ian Lance Taylor (ian@cygnus.com)
1610 * Makefile.in: map program names through program_transform_name
1613 Sun Aug 30 18:09:03 1992 Per Bothner (bothner@rtl.cygnus.com)
1615 * Makefile.in: Bump to versions 1.97.90.
1616 * cplus-dem.c: Removed. Was nowhere used - and if some
1617 programs are changed to to demangling should now use the
1618 versions in libiberty.
1620 Thu Aug 27 12:58:09 1992 Brendan Kehoe (brendan@cygnus.com)
1622 * configure.in: add we32k
1624 Mon Aug 24 14:53:42 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1626 * ar.c (map_over_members): if the element of the archive has a
1627 null name, fill it in.
1629 * nm.c (do_one_rel_file): only warn if a bfd's flags say there
1630 will be symbols and there aren't any.
1632 Wed Aug 19 11:20:25 1992 Ian Lance Taylor (ian@cygnus.com)
1634 * m68k-pinsn.c: handle new operand type 'r', introduced for cas2.
1636 Tue Aug 18 20:45:48 1992 Rob Savoye (rob@cygnus.com)
1638 * nm.c objdump.c: Added support for a +version (-V)
1639 to print the version number.
1641 * ar.c, copy.c: Added support for a -V option to print
1644 Tue Aug 18 13:28:44 1992 Ian Lance Taylor (ian@cygnus.com)
1646 * config/mh-apollo68v: removed -g from CC definition.
1648 * Makefile.in: always create installation directories.
1650 Mon Aug 17 18:33:41 1992 Per Bothner (bothner@rtl.cygnus.com)
1652 * m68k-pinsn.c: Minor fix in style of output (don't use
1653 range to indicate floating point control registers).
1655 Tue Aug 11 23:42:21 1992 Per Bothner (bothner@cygnus.com)
1657 * ar.c (main): Don't *always* set the verbose flag!
1659 Wed Aug 5 11:25:27 1992 Per Bothner (bothner@rtl.cygnus.com)
1661 * copy.c: When is_strip (because it is invoked as the strip
1662 program), follow traditional argv processing:
1663 'strip file1 file2' now strips file1 and file2, rather
1664 than stripping file1 (as input), leaving output in file2.
1666 Mon Jul 27 16:28:08 1992 Per Bothner (bothner@rtl.cygnus.com)
1668 * objdump.c (display_info, display_info_table): Call
1669 bfd_set_format() on dummy bfd before using it (twice).
1670 * ar.c: Make sure archive is created on command 'r'
1671 even when no elements are inserted. (Clean up and
1672 simplify some non-working related code.)
1674 Mon Jul 20 02:48:38 1992 D. V. Henkel-Wallace (gumby@cygnus.com)
1676 * configure.in: hppa support doesn't assume hp OS (from sef).
1678 Sat Jul 18 14:35:22 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1680 * configure.in: recognize hppa hosts (bsd & hpux), error messages
1681 to stderr, not stdout
1683 Fri Jul 17 18:39:44 1992 K. Richard Pixley (rich@rtl.cygnus.com)
1685 * ar.1, binutils.texi, i960-pinsn.c, nm.1, objdump.1, ranlib.1,
1686 size.1, sparc-pinsn.c, strip.1: removed rcsid's.
1688 Thu Jul 16 16:55:24 1992 K. Richard Pixley (rich@rtl.cygnus.com)
1690 * Makefile.dos: removed rcsid.
1692 Thu Jul 16 08:23:07 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1694 * objdump.c (display_bfd): print state of BFD_IS_RELAXABLE too
1696 Tue Jun 30 20:26:15 1992 D. V. Henkel-Wallace (gumby@cygnus.com)
1698 * Makefile.in: Add program_suffix (parallel to program_prefix)
1700 Thu Jun 25 04:52:45 1992 John Gilmore (gnu at cygnus.com)
1702 * nm.c (sorters): Lint. Remove excess whitespace.
1704 Wed Jun 24 13:48:07 1992 Per Bothner (bothner@cygnus.com)
1706 * nm.c (valueof macro): Add missing parentheses.
1707 (Their lack screwed up numeric_forward().)
1709 Sun Jun 14 10:33:27 1992 John Gilmore (gnu at cygnus.com)
1711 * objdump.c (dump_elf_stabs): Also dump .stab.index and
1712 .stab.excl sections.
1713 (dump_elf_stabs_1): Split out main body of old dump_elf_stabs.
1714 * objdump.1, binutils.texi: Document new sections dumped.
1716 Fri Jun 12 22:23:35 1992 John Gilmore (gnu at cygnus.com)
1718 * size.c, objdump.c, bucomm.c: Lint.
1720 Thu Jun 11 01:19:06 1992 John Gilmore (gnu at cygnus.com)
1722 * objdump.c (dump_elf_stabs): New feature: --stabs prints out a
1723 .stab section from an ELF file. Installed under #ifdef
1724 ELF_STAB_DISPLAY so it can be easily disabled, since it requires
1725 bfd-internals header files and such.
1726 * objdump.1, binutils.texi: Update for --stabs. Also fix
1727 objdump's doc to use -- rather than + for long options.
1728 (FIXME: Not yet fixed everywhere in binutils.texinfo.)
1730 Wed Jun 10 07:53:24 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1732 * objdump.c(display_info), patches from
1733 mohring@informatik.tu-muenchen.de to print the table much more
1736 Thu May 28 13:36:16 1992 Per Bothner (bothner@rtl.cygnus.com)
1738 * objdump.c: Add another enum->int cast, for the sake of
1739 old compilers (such as PCC).
1741 Wed May 27 13:01:44 1992 Per Bothner (bothner@rtl.cygnus.com)
1743 * arlex.l: Don't include <sysdep.h> (unneeded conflicts).
1744 Add declaration of strdup().
1746 Fri May 22 13:40:37 1992 Per Bothner (bothner@cygnus.com)
1748 * Makefile.in: Use srcdir instead of VPATH in ldgram/ldlex
1749 rules, since these are used when building a distribution.
1750 * Makefile.in (arlex.c): Don't re-direct output, since that
1751 leaves a bogus output files if it fails.
1753 * arlex.l: Make work with lex, for what it's worth.
1754 * Makefile.in: Better lex support.
1755 * Makefile.in (dist): Generate flex and bison outputs
1758 Thu May 14 17:17:59 1992 K. Richard Pixley (rich@rtl.cygnus.com)
1760 * Makefile.in: get BISON definition right.
1762 Fri May 8 07:47:08 1992 K. Richard Pixley (rich@cygnus.com)
1764 * sanity.sh: default TMPDIR to ".".
1766 Thu May 7 12:34:50 1992 Roland H. Pesch (pesch@fowanton.cygnus.com)
1768 * binutils.texi: add doc for ar command language.
1770 Wed May 6 18:05:36 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1772 * arparse.y: make END call ar_end
1773 * arsup.c (ar_end): added, deletes temp file if archive session
1777 Wed May 6 11:08:53 1992 K. Richard Pixley (rich@rtl.cygnus.com)
1779 * Makefile.in: use bison & flex from ../ if they exist. Also,
1782 * sanity.sh: remove temporary directory when finished.
1784 Tue May 5 12:00:58 1992 Per Bothner (bothner@rtl.cygnus.com)
1786 * Makefile.in: Bump to version 1.97.
1787 * ar.c: Declare errno for machines that need it.
1789 Mon May 4 23:29:51 1992 John Gilmore (gnu@cygnus.com)
1791 * objdump.c (display_info): Handle error cases without coredump.
1792 Close the dummy temporary file we open in the loop.
1793 * Makefile.in (arsup.o): Add kludge to build with Sun Make.
1795 Fri May 1 16:20:23 1992 K. Richard Pixley (rich@cygnus.com)
1797 * Makefile.in: added test-install target.
1799 * sanity.sh: new file.
1801 * Makefile.in: use sanity test on make check.
1803 Tue Apr 21 13:38:37 1992 K. Richard Pixley (rich@cygnus.com)
1805 * Makefile.in: rework CFLAGS so that they can be passed on the
1806 command line to make. Remove MINUS_G. Default CFLAGS to -g.
1808 Wed Apr 15 14:33:07 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1810 * arsup.c, arsup.h, arparse.y, arlex.l: support for archive
1813 Fri Mar 6 21:54:53 1992 K. Richard Pixley (rich@cygnus.com)
1815 * Makefile.in: added check target.
1817 Thu Mar 5 21:35:49 1992 K. Richard Pixley (rich@cygnus.com)
1819 * Makefile.in: added clean-info target.
1821 Tue Mar 3 15:36:37 1992 K. Richard Pixley (rich@rtl.cygnus.com)
1823 * Makefile.in: remove $(COPY_PROG) from PROGS. It shouldn't be
1824 installed. added tooldir and program_prefix.
1826 Wed Feb 26 18:04:40 1992 K. Richard Pixley (rich@cygnus.com)
1828 * Makefile.in, configure.in: removed traces of namesubdir,
1829 -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
1830 copyrights to '92, changed some from Cygnus to FSF.
1832 Sun Feb 16 12:53:02 1992 Per Bothner (bothner at cygnus.com)
1834 * Makefile.in: Bump version to 1.96, and remove -beta
1835 suffix from distribution name.
1836 * m68k-pinsn.c: New macro COERCE_SIGNED_CHAR to extract
1837 the signed value of a character (even if chars are unsigned).
1838 * sparc-pinsn.c: Add new operand types.
1840 Thu Feb 6 12:14:19 1992 Steve Chamberlain (sac at rtl.cygnus.com)
1842 * objdump.c (disassemble_data): don't print a section's contents
1843 if it's not loadable (eg bss)
1845 Tue Jan 28 11:11:06 1992 Steve Chamberlain (sac at rtl.cygnus.com)
1847 * m68k-pinsn.c (print_insn_arg): fixed so that -ve branch
1848 displacements don't get printed as large +ve ones.
1850 Fri Jan 24 14:47:53 1992 Steve Chamberlain (sac at rtl.cygnus.com)
1852 * copy.c, nm.c, objdump.c, size.c : changed to use the
1856 Mon Dec 30 18:34:41 1991 Per Bothner (bothner at cygnus.com)
1858 * bucomm.c (print_arelt_descr): Tweek the output format
1859 so that 'ar tv' output follows Posix 1003.2/D11.
1860 Output is now also identical to Sun's (except __.SYMDEF).
1862 Mon Dec 30 06:09:53 1991 John Gilmore (gnu at cygnus.com)
1864 * Makefile.in: Make `make' output more readable.
1866 Wed Dec 18 15:04:45 1991 Per Bothner (bothner at cygnus.com)
1868 * Makefile.in: Bump to version 1.94.
1870 Wed Dec 11 16:48:09 1991 Steve Chamberlain (sac at cygnus.com)
1872 * ar.c: added "b" to fopens for dos
1873 * configdj.bat, makefile.dos new files from DJ
1875 Tue Dec 10 04:07:26 1991 K. Richard Pixley (rich at rtl.cygnus.com)
1877 * Makefile.in: infodir belongs in datadir.
1879 Sat Dec 7 17:09:37 1991 Steve Chamberlain (sac at rtl.cygnus.com)
1881 * bucomm.h: created to hold prototypes of bucomm.c
1882 * objdump.h: created to hold prototyes of objdump.c
1883 * am29k-pinsn.c: include objdump.h
1884 * ar.c: include bucomm.h, get ar.h from the right place and
1886 * bucomm.c: defunize bfd_fatal
1887 * copy.c: include bucomm.h, lint.
1888 * i960-pinsn.h: include bucomm.h
1889 * m68k-pinsn.h: lint
1890 * nm.c: include bucomm.h, lint
1892 * sparc-pinsn.c: include objdump.h
1896 Fri Dec 6 23:02:14 1991 K. Richard Pixley (rich at rtl.cygnus.com)
1898 * Makefile.in: added standards.text support. install using
1899 INSTALL_PROGRAM and INSTALL_DATA.
1901 * configure.in: configure now does all of it's work from objdir so
1902 make file existence tests against ${srcdir}.
1904 Thu Dec 5 22:46:22 1991 K. Richard Pixley (rich at rtl.cygnus.com)
1906 * Makefile.in: idestdir and ddestdir go away. Added copyrights
1907 and shift gpl to v2. Added ChangeLog if it didn't exist. docdir
1908 and mandir now keyed off datadir by default.
1910 Wed Dec 4 22:42:03 1991 Per Bothner (bothner at cygnus.com)
1912 * Makefile.in: Bump to version 1.93.
1913 * Makefile.in: Add make-strip.o:maybe-strip.c dependency
1914 for make versions that provide half-baked VPATH-support (e.g. Sun's).
1915 * size.c: Improvements suggested by
1916 "david d [zoo] zuhn" <zoo@aps1.spa.umn.edu>:
1917 - Don't emit (Berkeley) headers if no files were found.
1918 - Return a non-zero return code on failure.
1920 Sat Nov 30 21:34:19 1991 Steve Chamberlain (sac at rtl.cygnus.com)
1922 Changes due to include file renaming:
1923 * am29k-pinsn.c: a29k-opcode.h -> opcode/a29k.h
1924 * sparc-pinsn.c: sparc-opcode.h -> opcode/sparc.h
1925 * m68k-pinsn.c: m68k-opcode.h -> opcode/m68k.h
1926 * nm.c: stab.gnu.h -> aout/stab_gnu.h
1928 Tue Nov 19 19:20:43 1991 Per Bothner (bothner at cygnus.com)
1930 * README: Mention MINIMIZE flag for bfd's make.
1932 Mon Nov 18 12:05:37 1991 Per Bothner (bothner at cygnus.com)
1934 * README: Various improvements.
1936 Sun Nov 17 23:40:59 1991 Per Bothner (bothner at cygnus.com)
1938 * Makefile.in: Bump to version 1.92.
1939 * version.c, Makefile.in: Get version string from Makefile.
1940 * copy.c, is-strip.c, not-strip.c, maybe-strip.c, Makefile.in:
1941 Make the same change that we earlier did for ar/ranlib:
1942 Generate two different binaries for strip and copy and use
1943 a global variable with different values to distinguish
1944 ostrip from copy. (-1 means to use argv[0] to decide,
1945 so you can get the old behavior, but it is no longer the default).
1946 * copy.c (copy_file): Set EXEC_P of output bfd if input is so.
1947 * copy.c (main): If is_strip==-1, compare last 5 chars
1948 of argv[0], not the whole path.
1949 * copy.c (main): Return 0, not 1.
1950 * copy.c (setup_sections): Fix due to change in bfd_make_section
1951 now failing if asked for a duplicate section.
1952 * strip.c, ostrip.c: Removed obsolete files.
1953 * ar.c, not-ranlib.c, maybe-ranlib.c:
1954 Change encoding of is_ranlib variable to be consistent
1955 with is_strip for strip.copy (i.e -1 to means use argv[0]).
1957 Thu Nov 14 20:11:02 1991 Per Bothner (bothner at cygnus.com)
1959 * version.c (program_version): Update to version 1.92.
1961 Tue Nov 12 16:17:53 1991 Per Bothner (bothner at cygnus.com)
1963 * ar.c (get_pos_bfd): Previous fix was missing a "break".
1965 Thu Nov 7 08:55:56 1991 Steve Chamberlain (sac at cygnus.com)
1967 * am29k-pinsn.c: Fixed bug in mtacc, dmac and fmac instruction
1968 encodings. (Thaks to David Wood)
1970 Sun Nov 3 14:50:23 1991 Per Bothner (bothner at cygnus.com)
1972 * Makefile.in ($(DIST_NAME).tar.Z), TODO: Various fixes.
1973 * ar.c (get_pos_bfd): Fix to handling of before/after
1974 positioning options.
1975 * bucomm.c (fatal): MISSING_VFPRINTF is no longer an issue,
1976 since libiberty contains vfprintf etc if otherwise missing.
1977 * m68k-pinsn.c (print_insn_arg): Support BB/BW/BL
1978 type operands, as used by branch instructions.
1979 * nm.c: Delegate printing of symbols to BFD,
1980 by using bfd_print_symbol to do the formatting.
1982 Mon Oct 28 11:20:47 1991 Steve Chamberlain (steve at cygnus.com)
1984 * ar.c (write_archive.c): added unlink before rename since some
1985 systems can't rename onto an existant file.
1987 Mon Oct 21 09:47:23 1991 Steve Chamberlain (steve at rtl.cygnus.com)
1989 * nm.c: now doesn't crash if a symbol with no section and no
1992 Thu Oct 17 15:25:50 1991 Per Bothner (bothner at cygnus.com)
1994 * Makefile.in, version.c: Bump to version 1.91.
1996 Wed Oct 16 11:45:36 1991 Per Bothner (bothner at cygnus.com)
1998 * Makefile.in, ar.c, bucomm.c, copy.c, cplus-dem.c, filemode.c,
1999 i960-pinsn.c, m68k-pinsn.c, nm.c, objdump.c, size.c, sparc-pinsn.c,
2000 * strip.c: Add or update Copyright notice.
2001 * TODO: Add note on 'nm -a'.
2002 * version.c: Update version number to 1.90.
2003 * Makefile.in: Fix making of documentation for dist.
2005 Tue Oct 15 00:17:17 1991 Per Bothner (bothner at cygnus.com)
2008 * Makefile.in: New kludgy rules for making a tarfile.
2009 * Makefile.in: Fix bindir path.
2011 Mon Oct 14 17:34:29 1991 Roland H. Pesch (pesch at cygnus.com)
2013 * Makefile.in: add targets binutils.mm, binutils.me
2015 Fri Oct 11 22:44:21 1991 John Gilmore (gnu at cygnus.com)
2017 * Makefile.in: Avoid Sun Make VPATH bugs by adding dependencies.
2019 Fri Oct 11 12:51:33 1991 Roland H. Pesch (pesch at cygnus.com)
2021 * Makefile.in: add target "binutils.ms"
2023 * binutils.texinfo: minor restructuring for texi2roff comfort.
2025 Fri Oct 11 04:12:28 1991 John Gilmore (gnu at cygnus.com)
2027 Restructure configuration scheme for bfd, binutils, ld.
2029 * include/sys/h-*.h: Move to bfd/hosts/h-*.h.
2030 * configure.in: Revise to symlink sysdep.h to ../bfd/hosts/h-xxx.h.
2031 Change some config names to match other dirs.
2032 * *.c: Include bfd.h before sysdep.h, so ansidecl and PROTO()
2034 * Makefile.in: Use -I. to get sysdep.h.
2036 Wed Oct 9 22:42:56 1991 Per Bothner (bothner at cygnus.com)
2038 * nm.c (print_symbols): Handle NULL name field of symbol.
2039 * Makefile.in: Removed spurious comment.
2041 Tue Oct 8 16:55:03 1991 Roland H. Pesch (pesch at cygnus.com)
2043 * binutils.texinfo: minor typos, phrasing, formatting fixes.
2045 Tue Oct 8 15:13:20 1991 Per Bothner (bothner at cygnus.com)
2047 * configure.in: Get host file from ../bfd/config, not config.
2048 * config/*: Remove config directory and its files.
2050 Tue Oct 8 13:58:59 1991 Roland H. Pesch (pesch at cygnus.com)
2052 * Makefile.in: new targets binutils.dvi, binutils.info
2054 * binutils.texinfo: remove most remaining FIXME's, delete
2055 references to __.SYMDEF by name
2058 Tue Oct 8 10:23:44 1991 Steve Chamberlain (steve at cygnus.com)
2060 * objdump.c (print_address) Print addresses nicely.
2062 Mon Oct 7 11:31:05 1991 Per Bothner (bothner at cygnus.com)
2064 * ar.c, Makefile.in, new files {is,not,maybe}-ranlib.c:
2065 Make two different binaries for ar and ranlib, instead of
2066 distinguishing them at run time using argv[0].
2067 (Old behavior is still available if you "make ar_with_ranlib",
2068 but it is not the default.)
2069 * ranlib.sh (new): An alternative one-line
2070 shell implementation of ranlib.
2072 Fri Oct 4 21:49:44 1991 John Gilmore (gnu at cygnus.com)
2074 * objdump.c: Cope with renames of a few BFD types & enums.
2076 Fri Oct 4 19:08:09 1991 Roland H. Pesch (pesch at cygnus.com)
2078 * binutils.texinfo: add new file (rudimentary docn)
2080 Mon Sep 30 12:30:39 1991 Per Bothner (bothner at cygnus.com)
2082 * config/hmake-news: Add new file (for Sony NEWSOS3).
2083 * bucomm.c (fatal): Conditionally compile fatal() depending on
2084 MISSING_VFPRINTF, and don't confuse the issue with NO_VARARGS.
2085 * objdump.c (dump_headers): Trivial output format change.
2086 * objdump.c (display_info): Loop over integers, not enums,
2087 to appease old compilers.
2089 Mon May 20 16:14:07 1991 Steve Chamberlain (steve at cygint.cygnus.com)
2091 *objdump.c *nm.c *copy.c :hanged some types to work with 64 bit object files
2093 Thu May 16 16:06:55 1991 Steve Chamberlain (steve at cygint.cygnus.com)
2095 * objdump.c (print_address): Make disasembled output more
2096 consistent with gdb and as: Add 0x when printing hex.
2097 Don't print extra leading zeros.
2098 Attempt to not print "filename.o".
2099 * objdump.c: Add some enum-to-int casts to accomodate old compilers.
2102 Fri May 3 22:21:44 1991 John Gilmore (gnu at cygint.cygnus.com)
2104 * copy.c: Change =& constructs to = &, since they confuse older
2112 version-control: never