1 2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
3 * configure.ac: Revert the AM_ZLIB change.
4 * Makefile.in: Regenerated.
5 * aclocal.m4: Likewise.
8 2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
10 * Makefile.am (ZLIB): New.
12 (AM_CFLAGS): Add $(ZLIBINC).
13 (readelf_LDADD): Add $(ZLIB).
14 * configure.ac (AM_ZLIB): Removed.
15 (zlibdir): New. AC_SUBST.
17 Add --with-system-zlib.
18 * Makefile.in: Regenerated.
19 * config.in: Likewise.
20 * configure: Likewise.
22 2015-03-19 Nick Clifton <nickc@redhat.com>
24 * readelf.c (get_machine_flags): Decode RL78's G13 and G14 flags.
26 2015-03-18 Jon Turney <jon.turney@dronecode.org.uk>
27 Nick Clifton <nickc@redhat.com>
30 * doc/binutils.texi: Note that when objcopy compresses debug
31 sections the compression is only performed if it makes the section
34 2015-03-10 H.J. Lu <hongjiu.lu@intel.com>
37 * readelf.c (parse_args): Move nothing to do warning to ...
40 2015-03-10 Nick Clifton <nickc@redhat.com>
43 * readelf.c (parse_args): Enhance check for nothing to do by
44 accounting for the --wide option.
47 * objcopy.c (copy_object): Avoid calling fatal as that does not
48 allow the parent to clean up temporary files.
50 2015-03-10 Yuri Gribov <y.gribov@samsung.arm>
53 * readelf.c: Remove support for ELF_ARM_HASENTRY.
55 2015-03-05 Nick Clifton <nickc@redhat.com>
58 * doc/binutils.texi (objcopy): Extend description of
59 --add-gnu-debuglink option to explain that the separate debug info
60 file must exist. Add a description of what to do if the debug
61 info file is built in one place but then installed into a separate
64 2015-03-05 Nick Clifton <nickc@redhat.com>
67 * dlltool.c (temp_file_to_remove): New local array.
68 (unlink_temp_files): New functions - unlinks any file in the
69 temp_file_to_remove array, unless dotdeltemps is set.
70 (gen_exp_file): Add temp files to array.
71 (make_head): Likewise.
72 (make_delay_head): Likewise.
73 (make_tail): Likewise.
74 (gen_lib_file): Call unlink_temp_files.
76 2015-02-28 Andrew Burgess <andrew.burgess@embecosm.com>
78 * objcopy.c (update_sections): New list.
79 (command_line_switch): Add OPTION_UPDATE_SECTION.
80 (copy_options): Add update-section.
81 (copy_usage): Document new option.
82 (is_update_section): New function.
83 (is_strip_section_1): Add check for attempt to update and remove
85 (copy_object): Update size and content of requested sections.
86 (skip_section): Don't copy for updated sections.
87 (copy_main): Handle --update-section.
88 * doc/binutils.texi (objcopy): Add description of --update-section
90 * NEWS: Mention --update-section option.
92 2015-02-26 Nick Clifton <nickc@redhat.com>
95 * coffgrok.c (do_type): Check for an out of range tag index.
96 Check for integer overflow computing array dimension.
97 (do_define): Likewise.
99 2015-02-26 Andrew Burgess <andrew.burgess@embecosm.com>
101 * objcopy.c (init_section_add): Rename optarg to arg in order to
102 avoid shadowing a global variable.
104 2015-02-26 Nick Clifton <nickc@redhat.com>
107 * resrc.c (write_rc_messagetable): Tighten check for invalid
110 * dwarf.c (display_debug_loc): Pacify the undefined behaviour
111 sanitizer by simplifying address difference calculation.
112 (struct Frame_Chunk): Change type of cfa_offset to dwarf_vma in
113 order to avoid arithmetic overflows.
114 (frame_display_row): Cast cfa_offset before printing it.
115 (display_debug_frames): Likewise.
116 Check for an unexpected segment size.
117 Chnage type of 'l' local to dwarf_vma and cast it back to an int
119 (process_cu_tu_index): Tighten check for an invalid ncols value.
120 * readelf.c (process_corefile_note_segment): Check for
121 inote.descdata extending beyond the end of the section.
122 (process_v850_notes): Likewise.
124 2015-02-26 Terry Guo <terry.guo@arm.com>
126 * readelf.c (arm_attr_tag_ABI_HardFP_use): Update how we
129 2015-02-25 Andrew Burgess <andrew.burgess@embecosm.com>
131 * objcopy.c (init_section_add): New function.
132 (section_add_load_file): New function.
133 (copy_main): Make use of new functions.
135 2015-02-25 Andrew Burgess <andrew.burgess@embecosm.com>
137 * od-elf32_avr.c: Add elf32-avr.h include.
138 (OPT_AVRPROP): Define.
139 (options[]): Add 'avr-prop' entry.
140 (elf32_avr_help): Add avr-prop help text.
141 (elf32_avr_dump_avr_prop): New function.
142 (elf32_avr_dump): Add check for avr-prop.
144 2015-02-24 Nick Clifton <nickc@redhat.com>
146 * readelf.c (get_machine_flags): Remove deprecated V850 machine
148 (get_v850_section_type_name): New function. Handles V850 special
150 (get_section_type_name): Add support for V850.
151 (get_v850_elf_note_type): New function. Returns the name of a
153 (print_v850_note): New function. Prints a V850 note.
154 (process_v850_notes): New function. Prints V850 notes.
155 (process_note_sections): Add support for V850.
157 2015-02-24 Mike Frysinger <vapier@gentoo.org>
160 * readelf.c (process_symbol_table): Declare chained. Increment it
161 in every loop. Abort when chained is larger than nchains. Move
162 error check outside of chain loop.
164 2015-02-24 Dmitry Antipov <dantipov@nvidia.com>
166 * readelf.c (find_symbol_for_address): Use a binary search to
167 speed up symbol location. Skip check for function symbol type.
168 (*_unw_aux_info): Add funtab and nfuns fields contains a sorted
169 list of function symbols.
170 (dump_ia64_unwind): Initialise the funtab and nfuns fields and
171 pass them to find_symbol_for_address.
172 (dump_hppa_unwind): Likewise.
173 (arm_print_vma_and_name): Pass funtab to find_symbol_for_address.
174 (dump_arm_unwind): Initialise the funtab and nfuns fields.
176 2015-02-24 Nick Clifton <nickc@redhat.com>
178 * objdump.c (dump_section): Extend the warning message displayed
179 when a section cannot be loaded.
181 2015-02-21 Mike Frysinger <vapier@gentoo.org>
183 * readelf.c (process_program_headers): Add newline to warning
186 2015-02-20 Andreas Arnez <arnez@linux.vnet.ibm.com>
188 * readelf.c (get_note_type): Add NT_S390_VXRS_LOW and
191 2015-02-13 Nick Clifton <nickc@redhat.com>
194 * dwarf.c (read_leb128): Fix test for shift becoming too large.
196 * coffgrok.c (do_define): Add check for type size overflow.
197 * srconv.c (walk_tree_sfile): Check that enough sections are
198 available before parsing.
202 * dwarf.c (display_debug_aranges): Add check for an excessive
204 (process_cu_tu_index): Check for a row * columns sum being too
207 2015-02-13 Alan Modra <amodra@gmail.com>
209 * dwarf.c: Formatting, whitespace.
210 (process_debug_info): Style fix.
212 2015-02-11 Nick Clifton <nickc@redhat.com>
214 * rl78-decode.opc: Add 'a' attribute to instructions that support
216 * rl78-decode.c: Regenerate.
217 * rl78-dis.c (print_insn_rl78): Display the offset in [HL+0]
220 2015-02-11 Nick Clifton <nickc@redhat.com>
223 * dwarf.c (display_debug_pubnames_worker): Work around compiler
224 bug checking address ranges.
225 (display_debug_frames): Likewise.
226 (display_gdb_index): Likewise.
227 (process_cu_tu_index): Add range check on the ncols value.
229 2015-02-10 Nick Clifton <nickc@redhat.com>
232 * dwarf.c (eh_addr_size): Use an unsigned type.
233 (size_of_encoded_value): Return an unsigned type.
234 (read_leb128): Break if the shift becomes too big.
235 (process_extended_line_op): Do not read the address if the length
237 (read_cie): Warn and fail if the pointer size or segment size are
239 * dwarf.h (DWARF2_External_LineInfo): Delete unused and incorrect
240 structure definition.
241 (DWARF2_External_PubNames): Likewise.
242 (DWARF2_External_CompUnit): Likewise.
243 (DWARF2_External_ARange): Likewise.
244 (DWARF2_Internal_LineInfo): Use dwarf_vma type for
246 (eh_addr_size): Update prototype.
249 * dwarf.c (process_debug_info): Zero the debug information array
250 since correct initialisation cannot be relied upon.
251 (process_cu_tu_index): Improve range checks.
254 * dwarf.c (display_debug_pubnames_worker): Use dwarf_vma type for
256 * readelf.c (dump_relocations): Handle printing offsets which are
258 (process_corefile_note_segment): Add range check of the namesz
261 2015-02-09 Mark Wielaard <mjw@redhat.com>
263 * dwarf.c (read_and_display_attr_value): Handle DW_LANG_Fortran03
264 and DW_LANG_Fortran08.
266 2015-02-06 Nick Clifton <nickc@redhat.com>
269 * dwarf.c (display_debug_frames): Fix range checks to work on
270 32-bit binaries complied on a 64-bit host.
273 * dwarf.c (xcmalloc): Fail if the arguments are too big.
274 (xcrealloc): Likewise.
275 (xcalloc2): Likewise.
276 * readelf.c (process_mips_specific): Fail if an option has an
279 2015-02-05 Alan Modra <amodra@gmail.com>
282 * dwarf.c (dwarf_select_sections_by_letters): Don't refer to optarg.
284 2015-02-04 Nick Clifton <nickc@redhat.com>
287 * dwarf.c (read_and_display_attr_value): Test for a block length
288 being so long that it wraps around to before the start of the block.
289 (process_debug_info): Test for section_begin wrapping around to
290 before the start of the section.
291 (display_gdb_index): Test for num_cus being so large that the end
292 address wraps around to before the start of the section.
293 (process_cu_tu_index): Test for j being so large that the section
294 index pool wraps around to before the start of the section.
296 2015-02-03 Nick Clifton <nickc@redhat.com>
299 * dwarf.c (process_debug_info): Add range check.
300 (display_debug_pubnames_worker): Likewise.
301 (display_gdb_index): Fix range check.
302 (process_cu_tu_index): Add range check.
303 * readelf.c (get_data): Change parameter types from size_t to
304 bfd_size_type. Add checks for loss of accuracy when casting from
305 bfd_size_type to size_t.
306 (get_dynamic_data): Likewise.
307 (process_section_groups): Limit number of error messages.
309 2015-02-03 Nick Clifton <nickc@redhat.com>
312 * objdump.c (display_any_bfd): Fail if archives nest too deeply.
314 2015-01-28 James Bowman <james.bowman@ftdichip.com>
316 * readelf.c: Add FT32 support.
318 2015-01-27 Nick Clifton <nickc@redhat.com>
321 * dlltool.c (identify_search_archive): If the last archive was the
322 same as the current archive, terminate the loop.
324 * addr2line.c (slurp_symtab): If the symcount is zero, free the
325 symbol table pointer.
327 * rcparse.y: Add checks to avoid integer divide by zero.
328 * rescoff.c (read_coff_rsrc): Add check on the size of the
330 (read_coff_res_dir): Add check on the nesting level.
331 Check for resource names overrunning the buffer.
332 * resrc.c (write_rc_messagetable): Update formatting.
333 Add check of 'elen' being zero.
335 2015-01-23 Nick Clifton <nickc@redhat.com>
337 * nlmconv.c (powerpc_mangle_relocs): Fix build errors introduced
338 by recent delta, when compiling on for a 32-bit host.
340 2015-01-21 Nick Clifton <nickc@redhat.com>
343 * addr2line.c (main): Call bfd_set_error_program_name.
344 * ar.c (main): Likewise.
345 * coffdump.c (main): Likewise.
346 * cxxfilt.c (main): Likewise.
347 * dlltool.c (main): Likewise.
348 * nlmconv.c (main): Likewise.
349 * nm.c (main): Likewise.
350 * objdump.c (main): Likewise.
351 * size.c (main): Likewise.
352 * srconv.c (main): Likewise.
353 * strings.c (main): Likewise.
354 * sysdump.c (main): Likewise.
355 * windmc.c (main): Likewise.
356 * windres.c (main): Likewise.
357 * objcopy.c (main): Likewise.
358 (copy_relocations_in_section): Check for relocs without associated
361 2015-01-21 Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
363 * MAINTAINERS: Add self to ARM maintainers list.
365 2015-01-21 Nick Clifton <nickc@redhat.com>
368 * coffgrok.c (do_type): Check that computed ref exists.
369 (doit): Add range checks when computing section for scope.
371 2015-01-12 H.J. Lu <hongjiu.lu@intel.com>
373 * dwarf.c (process_debug_info): Properly check abbrev size.
375 2015-01-12 Nick Clifton <nickc@redhat.com>
378 * dwarf.c (process_debug_info): Check for abbrev_base being larger
379 than the section size.
380 (process_cu_tu_index): Use xcalloc2 to allocate the CU and TU
382 (xcalloc2): New function. Like xcalloc, but checks for overflow.
383 (display_debug_addr): Use xcalloc to allocate the debug_addr_info
384 array. Check for an address_base that is too large.
386 * dwarf.h (xcalloc2): Prototype.
388 2015-01-12 Alan Modra <amodra@gmail.com>
390 * prdbg.c (print_debugging_info): Don't use void* for function
392 * budbg.h (print_debugging_info): Update prototype.
394 2015-01-08 Nick Clifton <nickc@redhat.com>
397 * ojcopy.c (copy_object): Free the symbol table if no symbols
399 (copy_file): Use bfd_close_all_done to close files that could not
402 * sysdump.c (getINT): Fail if reading off the end of the buffer.
403 Replace call to abort with a call to fatal.
404 (getCHARS): Prevetn reading off the end of the buffer.
406 * nlmconv.c (i386_mangle_relocs): Skip relocs without an
408 (powerpc_mangle_relocs): Skip unrecognised relocs. Check address
409 range before applying a reloc.
411 2015-01-07 Nick Clifton <nickc@redhat.com>
414 * dlltool.c (scan_obj_file): Break loop if the last archive
415 displayed matches the current archive.
417 * objdump.c (display_any_bfd): Add a depth limit to nested archive
418 display in order to avoid infinite loops.
419 * srconv.c: Replace calls to abort with calls to fatal with an
422 2015-01-06 Nick Clifton <nickc@redhat.com>
425 * coffdump.c (dump_coff_section): Check for a symbol being
426 available before printing its name.
427 (main): Check the return value from coff_grok.
428 * coffgrok.c: Reformat and tidy.
429 Add range checks to most functions.
430 (coff_grok): Return NULL if the input bfd is not in a COFF
432 * coffgrok.h: Reformat and tidy.
433 (struct coff_section): Change the nrelocs field to unsigned.
434 * srconv.c (main): Check the return value from coff_grok.
436 2015-01-05 Nick Clifton <nickc@redhat.com>
439 * nm.c (print_symbol): Add 'is_synthetic' parameter. Use it to
440 help initialize the info.elfinfo field.
441 (print_size_symbols): Add 'synth_count' parameter. Use it to set
442 the is_synthetic parameter when calling print_symbol.
443 (print_symbols): Likewise.
444 (display_rel_file): Pass synth_count to printing function.
445 (display_archive): Break loop if the last archive displayed
446 matches the current archive.
447 * size.c (display_archive): Likewise.
449 2015-01-05 Nick Clifton <nickc@redhat.com>
452 * dwarf.c (alloc_num_debug_info_entries): New variable.
453 (process_debug_info): Set it. Use it to avoid displaying
454 attributes for which there is no info.
455 (display_debug_abbrev): Check that the debug_info_entry index is
456 valid before using it.
457 (display_loc_list_dwo): Likewise.
458 (process_cu_tu_index): Add range check for an overlarge dw_sect
460 (free_debug_memory): Reset alloc_num_debug_info_entries.
461 * readelf.c (slurp_ia64_unwind_table): Warn if the reloc could not
463 (dynamic_section_mips_val): Warn if the timestamp is invalid.
464 (print_mips_got_entry): Add a data_end parameter. Warn if a read
465 would go beyond the end of the data, and return an error value.
466 (process_mips_specific): Do not read options from beyond the end
468 Correct code to display optional data at the end of an option.
469 Warn if there are too many GOT symbols.
470 Update calls to print_mips_got_entry, and handle error returns.
472 2015-01-05 Daniel Klauer <daniel.c.klauer@web.de>
475 * doc/binutils.texi (dlltool): Correct description of --kill-at
478 2015-01-01 Alan Modra <amodra@gmail.com>
480 * version.c (print_version): Just print current year.
482 2015-01-01 Alan Modra <amodra@gmail.com>
484 Update year range in copyright notice of all files.
486 For older changes see ChangeLog-2014
488 Copyright (C) 2015 Free Software Foundation, Inc.
490 Copying and distribution of this file, with or without modification,
491 are permitted in any medium without royalty provided the copyright
492 notice and this notice are preserved.
498 version-control: never