1 2007-06-30 H.J. Lu <hongjiu.lu@intel.com>
3 * aclocal.m4: Regenerated.
4 * doc/Makefile.in: Likewise.
5 * Makefile.in: Likewise.
7 2007-06-29 Joseph Myers <joseph@codesourcery.com>
9 * readelf.c (display_power_gnu_attribute, process_power_specific):
11 (process_arch_specific): Call process_power_specific.
13 2007-06-29 Joseph Myers <joseph@codesourcery.com>
15 * readelf.c (display_mips_gnu_attribute): New.
16 (process_mips_specific): Call process_attributes.
18 2007-06-29 Joseph Myers <joseph@codesourcery.com>
20 * readelf.c (display_gnu_attribute): New.
21 (process_arm_specific): Rearrange as process_attributes.
22 (process_arm_specific): Replace by wrapper of process_attributes.
24 2007-06-28 Roland McGrath <roland@frob.com>
26 * objcopy.c (setup_section): Don't reset ELF section type to
27 SHT_NOBITS when it is SHT_NOTE.
28 * doc/binutils.texi (objcopy, strip): Mention under --only-keep-debug.
30 2007-06-27 Alan Modra <amodra@bigpond.net.au>
32 * ar.c: Rename uses of bfd.next to bfd.archive_next throughout.
34 * binemul.c: Likewise.
35 * objcopy.c: Likewise.
36 * dlltool.c: Likewise.
38 2007-06-26 Shantonu Sen <ssen@apple.com>
41 * Makefile.am (windres_DEPENDENCIES, windmc_DEPENDENCIES): Move
42 dependency on $(LIBICONV) to ...
43 (windres_LDADD, windmc_LDADD) ... here.
44 * Makefile.in: Regenerate.
46 2007-06-21 Alan Modra <amodra@bigpond.net.au>
48 * embedspu.sh (relas): Correct sh_info parsing.
50 2007-06-19 Danny Smith <dannysmith@users.sourceforge.net>
52 * objdump.c: Include sys/stat.h.
54 2007-06-19 Kai Tietz <kai.tietz@onevision.com>
56 * Makefile.am: Add windmc tool.
57 * Makefile.in: Regenerate.
58 * configure.in: Add windmc tool.
59 * configure: Regenerate.
64 * doc/Makefile.am: Add windmc tool.
65 * doc/Makefile.in: Regenerate.
66 * doc/binutils.texi: Add windmc documentation.
67 * NEWS: Mention new tool.
69 2007-06-18 Andi Kleen <ak@suse.de>
71 * objdump.c: Include sys/mman.h
72 (print_file_list): Remove f, add map, mapsize, linemap, maxline,
73 last_line, first fields.
76 (print_file_open): Call slurp_file and index_file. Initialize new
78 (skip_to_line): Rename to print_line and write only single line.
80 (show_line): Change to new algorithm.
82 2007-06-18 Thomas Weidenmueller <w3seek@reactos.org>
84 * resres.c (probe_binary): Fix test for badly formatted headers.
86 2007-06-18 Kai Tietz <Kai.Tietz@onevision.com>
88 * rclex.c: (cpp_line): Add code_page pragma support.
89 * windres.c: (usage, long_options, main): Add new option
91 * winduni.c: (wind_default_codepage, wind_current_codepage): New.
92 (unicode_from_ascii, ascii_from_unicode): Use
93 wind_current_codepage as codepage parameter.
94 (unicode_print): Print 4 characters for hexadecimal values in
96 * winduni.h: (wind_default_codepage, wind_current_codepage):
98 * doc/binutils.texi: Document new option.
99 * NEWS: Mention new features of windres.
101 2007-06-18 Brian D. Watt <bwatt@us.ibm.com>
103 * embedspu.sh: Parse _SPUEAR_ symbol values as hex.
105 2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
107 * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
109 * acinclude.m4: Removed.
111 * Makefile.in: Regenerated.
112 * aclocal.m4: Likewise.
113 * configure: Likewise.
115 2007-06-11 Nathan Sidwell <nathan@codesourcery.com>
117 * dwarf.c (decode_location_expression): Add DW_OP_form_tls_address.
119 2007-06-06 Kai Tietz <Kai.Tietz@onevision.com>
121 PR binutils/4356 binutils/591
122 * resrc.c (filename_need_quotes): New function.
123 (look_for_default): If filename_need_quotes is true then quote the
124 filename in the command line being created.
125 (read_rc_file): Likewise.
127 2007-06-06 Ben Elliston <bje@au.ibm.com>
129 * doc/binutils.texi (objdump): Fix capitalisation of "PowerPC".
131 2007-06-05 Kai Tietz <Kai.Tietz@onevision.com>
133 * Makefile.am: Add LIBICONV to windres.
134 * acinclude.m4: Added missing "lib-*.m4" and "lt*.m4" files.
135 * configure.in: Add AC_CHECK_HEADER for iconv.h and use AM_ICONV.
136 * config.in: Add ICONV defines.
137 * aclocal.m4: Regenerate.
138 * confugure: Regenerate.
139 * winduni.c: (local_iconv_map codepages, wind_language_t,
140 languages, unicode_is_valid_codepage, wind_find_language_by_id,
141 wind_find_language_by_codepage, wind_find_codepage_info,
142 unicode_from_codepage, codepage_from_unicode, iconv_onechar,
143 wind_iconv_cp, wind_MultiByteToWideChar wind_WideCharToMultiByte):
145 (ascii_from_unicode): Use codepage_from_unicode.
146 (ascii_from_unicode): Use unicode_from_codepage.
147 Use for cygwin windows API for unicode transformation.
148 * winduni.h: (CP_ACP, CP_UTF7, CP_UTF8, CP_OEM, CP_UTF16): New
150 (wind_language_t, local_iconv_map): New types.
151 (wind_find_language_by_id, wind_find_language_by_codepage,
152 unicode_is_valid_codepage, wind_find_codepage_info,
153 unicode_from_codepage, codepage_from_unicode): New
156 2007-06-05 Alan Modra <amodra@bigpond.net.au>
158 * embedspu.sh: Handle R_SPU_PPU* relocs with no symbol.
160 2007-05-30 Alan Modra <amodra@bigpond.net.au>
162 * objcopy.c (copy_object): Revert 2007-05-11 change. Don't
163 avoid calling bfd_copy_private_bfd_data for ELF STRIP_NONDEBUG.
164 (setup_section): Don't modify flags, and don't avoid calling
165 bfd_copy_private_section_data for ELF STRIP_NONDEBUG.
166 * readelf.c (process_program_headers): Ignore .dynamic of type
169 2007-05-29 Alan Modra <amodra@bigpond.net.au>
171 * embedspu.sh: Emit SPU ELF image to .data.rel.ro.speelf if
172 pic or pie and image needs relocs.
174 2007-05-24 Steve Ellcey <sje@cup.hp.com>
176 * Makefile.in: Regenerate.
177 * configure: Regenerate.
178 * aclocal.m4: Regenerate.
179 * doc/Makefile.in: Regenerate.
181 2007-05-24 Kai Tietz <Kai.Tietz@onevision.com>
183 * rcparse.y: Join strings for elements having no side-effects in
186 2007-05-23 Kai Tietz <Kai.Tietz@onevision.com>
188 * rclex.c: New file replacing rclex.l.
190 * windint.h: New file holding common structure and type
192 * Makefile.am: Added new header windint.h and exchanged rclex.l by
194 * Makefile.in: Regenerate.
195 * rcparse.y: Renamed some structures.
196 Use in internal representation always bfd_vma instead of long or
198 Removed from %union unused stringtable.
199 Added to %union suni structure for unicode strings.
200 Added new tokens for ANICURSOR, ANIICON, DLGINCLUDE,
201 DLGINIT, FONTDIR, HTML, MANIFEST, PLUGPLAY, VXD,
202 TOOLBAR, BUTTON, QUOTEDUNISTRING, and SIZEDUNISTRING.
203 Added support for these new rc file tokens.
204 * resbin.c: Rewrote using bfd and binary structures, and support
206 * rescoff.c: Likewise.
207 * resres.c: Likewise.
208 * resrc.c: Likewise. Dumps as RC are now recompilable.
209 * windres.c: As above. Using bfd for res and provide target
210 specific endianess support.
211 * windres.h: Use windint.h as include. Additionally removed K&R
213 * winduni.c: New printing and unichar support routines.
214 * winduni.h: Prototypes for new unichar helpers.
215 * windint.h: New file.
217 2007-05-22 Paul Brook <paul@codesourcery.com>
219 * objdump.c (find_symbol_for_address): Merge section and target
220 specific filtering code.
222 2007-05-22 Nick Clifton <nickc@redhat.com>
224 * doc/binutils.texi: Use @copying around the copyright notice.
226 2007-05-21 Richard Sandiford <richard@codesourcery.com>
228 * objdump.c (disassemble_bytes): Ignore disassembler_needs_relocs
229 for executables and shared libraries.
231 2007-05-18 Nathan Sidwell <nathan@codesourcery.com>
233 * objcopy.c (strip_main): Detect identical input and output file
235 (copy_main): Refactor tempname detection and use.
237 2007-05-17 Nick Clifton <nickc@redhat.com>
239 * objdump.c (load_debug_section): Select bias for DWARF debug
240 addresses based on the flavour of the bfd.
242 2007-05-11 Alan Modra <amodra@bigpond.net.au>
245 * objcopy.c (copy_object): Don't copy ELF program headers for
248 2007-05-11 Alan Modra <amodra@bigpond.net.au>
250 * embedspu.sh (find_prog): Prefer prog in same dir as embedspu
251 over one found on the users path.
252 (main): Generate .reloc for each R_SPU_PPU* reloc.
254 2007-04-28 Alan Modra <amodra@bigpond.net.au>
256 * prdbg.c (tg_variable): Adjust for changed demangler.
257 (tg_start_function): Likewise.
259 2007-04-27 Alan Modra <amodra@bigpond.net.au>
261 * bucumm.h: Split off host dependencies to..
263 Many files: Include sysdep.h. Remove duplicate headers and reorder.
264 * Makefile.am: Run "make dep-am".
265 * Makefile.in: Regenerate.
267 2007-04-24 Nick Clifton <nickc@redhat.com>
269 * srconv.c (walk_tree_type_1): Initialise dpt.dunno.
271 2007-04-24 Nathan Froyd <froydnj@codesourcery.com>
272 Phil Edwards <phil@codesourcery.com>
274 * objcopy.c (filter_symbols): Explicitly stripping a symbol
275 used in relocations is an error.
276 Retype 'keep' to bfd_boolean.
278 2007-04-24 Alan Modra <amodra@bigpond.net.au>
280 * Makefile.in: Regenerate.
281 * doc/Makefile.in: Regenerate.
283 2007-04-20 Nathan Froyd <froydnj@codesourcery.com>
284 Phil Edwards <phil@codesourcery.com>
285 Thomas de Lellis <tdel@windriver.com>
287 * objcopy.c (reverse_bytes): New variable.
288 (command_line_switch, copy_main): Add OPTION_REVERSE_ENDIAN.
289 (copy_options, copy_usage): Add "reverse-bytes" entry.
290 (copy_section): Reverse bytes within output sections.
291 * doc/binutils.texi: Document new objcopy option.
293 2007-04-20 Nick Clifton <nickc@redhat.com>
295 * rclex.l: Allow underscores at the start of identifiers.
297 2007-04-19 Alan Modra <amodra@bigpond.net.au>
299 * budemang.c: Delete.
300 * budemang.h: Delete.
301 * addr2line.c (translate_addresses): Call bfd_demangle rather than
303 * nm.c (print_symname): Likewise.
304 * objdump.c (objdump_print_symname, dump_symbols): Likewise.
305 (dump_bfd): Likewise.
306 * prdbg.c (struct pr_handle <demangler>): Add int param.
307 (tg_variable, tg_start_function): Adjust demangler calls.
308 * Makefile.am: Remove mention of budemang.[ch]. Run "make dep-am".
309 * Makefile.in: Regenerate.
310 * po/POTFILES.in: Regenerate.
312 2007-04-14 Steve Ellcey <sje@cup.hp.com>
314 * Makefile.am: Add ACLOCAL_AMFLAGS.
315 * configure.in: Change macro call order.
316 * Makefile.in: Regenerate.
317 * configure: Regenerate.
319 2007-04-13 Nathan Sidwell <nathan@codesourcery.com>
321 * Makefile.am (TOOL_PROGS): Add objcopy.
322 * Makefile.in: Rebuilt.
324 2007-04-12 H.J. Lu <hongjiu.lu@intel.com>
327 * objcopy.c (copy_object): Don't stop when there are no
328 sections to be copied.
330 2007-04-10 Vladimir Prus <vladimir@codesourcery.com>
332 * NEWS: Mention disjoint histograms support in
335 2007-04-09 Daniel Jacobowitz <dan@codesourcery.com>
337 * dwarf.c (process_debug_info): Do not require DW_AT_frame_base for
338 DW_TAG_inlined_subroutine.
340 2007-04-06 Matt Thomas <matt@netbsd.org>
342 * MAINTAINERS: Add myself as VAX and NetBSD support maintainer.
344 2007-04-05 Alan Modra <amodra@bigpond.net.au>
347 * nm.c (print_value): Cast bfd_vma to unsigned long to suit
350 2007-04-02 Nick Clifton <nickc@redhat.com>
353 * nm.c (value_format): Replace with value_format_32bit and
355 (set_radix): Update setting of value_format.
356 (set_print_width): New function. Compute the address size of a
357 given bfd and set the print_width global appropriately.
358 (display_archive): Use set_print_width.
359 (display_file): Likewise,
360 (print_object_filename_sysv): Update use of print_width.
361 (print_archive_member_sysv): Likewise.
362 (print_symbol_filename_posix): Likewise.
363 (print_sumbol_info_bfd, print_symbol_info_sysv): Likewise.
365 2007-03-28 Richard Sandiford <richard@codesourcery.com>
366 Phil Edwards <phil@codesourcery.com>
368 * doc/binutils.texi: Put the contents after the title page rather
369 than at the end of the document.
371 2007-03-28 Nick Clifton <nickc@redhat.com>
373 * readelf.c (slurp_rela_relocs): Add newline to end of error
375 (slurp_rel_relocs, request_dump, request_dump_byname,
376 process_program_headers, process_dynamic_section,
377 process_symbol_table, process_mips_specific, main): Likewise.
379 2007-03-28 Alan Modra <amodra@bigpond.net.au>
381 * MAINTAINERS: Update mailing list addresses. Add myself
384 2007-03-27 Alan Modra <amodra@bigpond.net.au>
386 * embedspu.sh: Correct toe_addr quoting.
388 2007-03-27 Alan Modra <amodra@bigpond.net.au>
390 * embedspu.sh: Combine "_EAR_" and "_EAR_*" patterns. Tighten
391 .toe section and .toe address checks. Use .reloc for _EAR*
392 symbols defined in non-BSS sections. Build table for _SPUEAR_
395 2007-03-23 Kaz Kojima <kkojima@rr.iij4u.or.jp>
398 * readelf.c (debug_apply_rela_addends): Do nothing for SH.
400 2007-03-22 Joseph Myers <joseph@codesourcery.com>
402 * doc/binutils.texi: Include VERSION_PACKAGE when reporting
405 2007-03-16 Kai Tietz <Kai.Tietz@onevision.com>
407 * dlltool.c (make_one_lib_file): Use pc-relative relocation
408 instead of an absolute relocation for x86_64-pc-mingw32 target.
410 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
412 * Makefile.am (REPORT_BUGS_TO): Removed.
413 (INCLUDES): Remove -DREPORT_BUGS_TO.
414 * Makefile.in: Regenerated.
416 * bucomm.c: Don't include bfdver.h.
417 * objdump.c: Likewise.
418 * version.c: Likewise.
420 * bucomm.h: Include bfdver.h.
422 * configure.in (--with-bugurl): Removed.
423 * configure: Regenerated.
425 * doc/Makefile.am (binutils_TEXINFOS): Removed.
426 (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
427 (TEXI2DVI): Likewise.
428 (config.texi): Removed.
429 (MOSTLYCLEANFILES): Remove config.texi.
430 * doc/Makefile.in: Regenerated.
432 * doc/binutils.texi: Include bfdver.texi instead of
435 2007-03-13 Nick Clifton <nickc@redhat.com>
437 * readelf.c (dump_section): Also test for SHT_REL sections when
438 producing the warning about unapplied relocs.
440 2007-03-07 Joseph Myers <joseph@codesourcery.com>
442 * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
444 * doc/Makefile.am (config.texi): Define BUGURL.
445 * doc/binutils.texi: Use BUGURL. Remove text about large files
447 * Makefile.in, configure, doc/Makefile.in: Regenerate.
449 2007-03-01 Phil Edwards <phil@codesourcery.com>
450 Richard Sandiford <richard@codesourcery.com>
452 * NEWS: Mention addition of --extract-symbol.
453 * doc/binutils.texi: Document it.
454 * objcopy.c (extract_symbol): New variable.
455 (OPTION_EXTRACT_SYMBOLS): New command_line_switch.
456 (copy_options): Add an entry for --extract-symbol.
457 (copy_usage): Mention --extract-symbol.
458 (copy_object): Set the start address to zero for --extract-symbol.
459 Do not copy private BFD data in that case.
460 (setup_section): Set the size, LMA and VMA to zero for
461 --extract-symbol. Do not copy private BFD data in that case.
462 (copy_section): Do not copy section contents if --extract-symbol
464 (copy_main): Set extract_symbol to TRUE if --extract-symbol
467 2007-03-01 Paul Brook <paul@codesourcery.com>
469 * MAINTAINERS: Update my entry.
471 2007-03-01 Joseph Myers <joseph@codesourcery.com>
473 * version.c: Update copyright date.
475 2007-03-01 Daniel Jacobowitz <dan@codesourcery.com>
477 * Makefile.am (install-exec-local): Depend on $(noinst_PROGRAMS).
478 Adjust $(EXEEXT) handling for $(RENAMED_PROGS).
479 * Makefile.in, doc/Makefile.in: Regenerate.
481 2007-03-01 Alan Modra <amodra@bigpond.net.au>
483 * embedspu.sh: Set type and size of global program handle symbol.
485 2007-02-28 Alan Modra <amodra@bigpond.net.au>
487 * Makefile.am (PROGS): Delete.
488 (RENAMED_PROGS): Define. Extracted from..
489 (noinst_PROGRAMS): ..here. Add BUILD_MISC.
490 (install-exec-local): Adjust.
491 * Makefile.in: Regenerate.
493 2007-02-28 Alan Modra <amodra@bigpond.net.au>
495 * Makefile.am (PROGS): Add BUILD_INSTALL_MISC.
496 (bin_PROGRAMS): Replace BUILD_MISC with BUILD_INSTALL_MISC.
497 (EXTRA_PROGRAMS): Remove bin2c.
498 (bin2c$(EXEEXT_FOR_BUILD)): New rule.
499 (bin2c_SOURCES): Delete.
500 (DISTCLEANFILES): Remove sysinfo.
501 (MOSTLYCLEANFILES): Add sysinfo$(EXEEXT_FOR_BUILD) and
502 bin2c$(EXEEXT_FOR_BUILD).
503 * configure.in (BUILD_MISC): Add $(EXEEXT_FOR_BUILD) to bin2c.
505 (BUILD_INSTALL_MISC): ..here.
506 * Makefile.in: Regenerate.
507 * configure: Regenerate.
509 2007-02-27 Alan Modra <amodra@bigpond.net.au>
512 * Makefile.am (EXTRA_PROGRAMS): Add bin2c.
513 (CFILES): Add bin2c.c.
514 (bin2c_SOURCES): Define.
515 (bin2c.o): Dependencies from "make dep-am".
516 * configure.in (BUILD_MISC): Add bin2c.
517 * version.c: Update year.
518 * po/POTFILES.in: Regenerate.
519 * Makefile.in: Regenerate.
520 * configure: Regenerate.
522 2007-02-17 Mark Mitchell <mark@codesourcery.com>
523 Nathan Sidwell <nathan@codesourcery.com>
524 Vladimir Prus <vladimir@codesourcery.com
525 Joseph Myers <joseph@codesourcery.com>
527 * configure.in (--with-bugurl): New option.
528 * configure: Regenerate.
529 * Makefile.am (REPORT_BUGS_TO): Define.
530 (INCLUDES): Define REPORT_BUGS_TO.
531 Regenerate dependencies.
532 * Makefile.in: Regenerate.
533 * doc/Makefile.in: Regenerate.
534 * bucomm.h: Remove include of bin-bugs.h.
535 * addr2line.c (usage): Don't print empty REPORT_BUGS_TO.
536 * ar.c (usage): Pass s to list_supported_targets. Don't print
537 empty REPORT_BUGS_TO.
538 * coffdump.c (show_usage): Don't print empty REPORT_BUGS_TO.
539 * cxxfilt.c (usage): Print bug url when giving help.
540 * dlltool.c (usage): Likewise.
541 * dllwrap.c (usage): Likewise.
542 * nlmconv.c (show_usage): Don't print empty REPORT_BUGS_TO.
543 * nm.c (usage): Likewise.
544 * objcopy.c (copy_usage, strip_usage): Likewise.
545 * objdump.c (usage): Likewise.
546 * readelf.c ((usage): Likewise. Add STREAM argument. Adjust
548 * size.c (usage): Don't print empty REPORT_BUGS_TO.
549 * srconv.c (show_usage): Likewise.
550 * strings.c (usage): Likewise.
551 * sysdymp.c (show_usage): Likewise.
552 * windres.c (usage): Likewise.
554 2007-02-13 Alan Modra <amodra@bigpond.net.au>
556 * embedspu.sh: Add -W to readelf invocation.
558 2007-02-06 Dave Brolley <brolley@redhat.com>
560 * MAINTAINERS: Add myself as the maintainer of the MeP port.
562 2007-02-06 Nick Clifton <nickc@redhat.com>
565 * readelf.c: Include elf/h8.h twice. The first time in order to
566 get the reloc numbers, the second time in order to get the reloc
568 (dump_section): Tell the user if the section being displayed has
569 unprocessed relocs associated with it.
570 (get_reloc_size): New function - returns the size of a reloc.
571 (debug_apply_rela_addends): Use get_reloc_size().
572 * dwarf.c (read_and_display_attr_value): Extend number of
573 languages known for the DW_AT_language attribute.
574 (process_debug_info): Display the attribute offset before decoding
575 the attribute, in case there are problems.
577 2007-02-05 Dave Brolley <brolley@redhat.com>
579 * readelf.c (dump_relocations): Don't check for
580 (rtype == NULL && type == R_RELC).
582 2007-02-05 Dave Brolley <brolley@redhat.com>
584 * Makefile.am (readelf.o): Depends on $(INCDIR)/elf/mep.h.
585 * Makefile.in: Regenerated.
586 * Contribute the following changes:
587 2003-10-29 Dave Brolley <brolley@redhat.com>
589 * configure.in: Define SKIP_ZEROES and SKIP_ZEROES_AT_END for mep.
590 * configure: Regenerated.
592 2001-04-03 Ben Elliston <bje@redhat.com>
594 * readelf.c: Include "elf/mep.h".
595 (guess_is_rela): Handle EM_CYGNUS_MEP.
596 (get_machine_name): Ditto.
597 (dump_relocations): Ditto.
599 2007-02-02 H.J. Lu <hongjiu.lu@intel.com>
601 * MAINTAINERS: Add a space between H.J. and Lu.
603 2007-02-02 H.J. Lu <hongjiu.lu@intel.com>
605 * doc/binutils.texi (objdump): Document the new addr64 option
606 for i386 disassembler.
608 2007-02-02 H.J. Lu <hongjiu.lu@intel.com>
611 * configure.in (DLLTOOL_DEFAULT): New. Defined for the first PE
613 (DLLTOOL_DEFS): Add $DLLTOOL_DEFAULT.
614 * configure: Regenerated.
616 * dlltool.c (mname): Defined with DLLTOOL_DEFAULT_XXX.
618 2007-02-02 Nick Clifton <nickc@redhat.com>
620 * doc/binutils.texi (objdump): Document support for disassembling
621 the 440 PowerPC architecture.
623 2007-01-31 Nathan Sidwell <nathan@codesourcery.com>
625 * dwarf.c (process_debug_info): Protect against bogus length and
628 2007-01-25 Kazu Hirata <kazu@codesourcery.com>
630 * ar.c (print_contents, extract_file): Cast the return value
633 2007-01-12 Alan Modra <amodra@bigpond.net.au>
635 * ar.c (open_inarch): Check fwrite return. Use size_t.
636 (extract_file): Likewise. Remove test for "negative" file size.
637 * readelf.c (process_program_headers): Check fscanf return.
639 2007-01-11 H.J. Lu <hongjiu.lu@intel.com>
641 * bucomm.c (template_in_dir): Fix typo.
643 2007-01-11 Alan Modra <amodra@bigpond.net.au>
645 * embedspu.sh: New file.
646 * Makefile.am (embedspu): Add rule.
647 * configure.in (BUILD_MISC): Add embedspu for powerpc-linux.
648 * Makefile.in: Regenerate.
649 * configure: Regenerate.
651 2007-01-11 Alan Modra <amodra@bigpond.net.au>
653 * bucomm.h (make_tempdir): Declare independently of HAVE_MKDTEMP.
654 * bucomm.c (template_in_dir): New function, split out from..
655 (make_tempname): ..here. Open the file with O_EXCL if !HAVE_MKSTEMP.
656 (make_tempdir): Use template_in_dir. Handle directory creation
658 * objcopy.c (MKDIR): Don't define.
659 (copy_archive): Use make_tempdir when !HAVE_MKDTEMP too. Fix
662 2007-01-08 Kazu Hirata <kazu@codesourcery.com>
664 * readelf.c (get_machine_flags): Treat Fido as an architecture
667 2007-01-08 Kai Tietz <kai.tietz@onevision.com>
669 * configure.in: Renamed target x86_64-*-mingw64 to
671 * configure: Regenerated.
673 2007-01-05 Alan Modra <amodra@bigpond.net.au>
675 * readelf.c (dump_section): Don't print 32-bit values, which
676 were done incorrectly for little-endian. Instead print bytes.
678 For older changes see ChangeLog-2006
684 version-control: never