1 Wed Jun 19 14:46:38 1996 Ian Lance Taylor <ian@cygnus.com>
3 * objdump.c (stabs): Change from struct internal_nlist * to
5 (print_section_stabs): Fetch stabs information directly, rather
6 than assuming that struct internal_nlist is the right size.
8 * binutils.texi: Document change to binary format: file position
9 based on load address, not section VMA.
11 * bucomm.h: Define SEEK_SET, SEEK_CUR, and SEEK_END if they are
14 Tue Jun 18 18:25:00 1996 Ian Lance Taylor <ian@cygnus.com>
16 * Makefile.in (DISTSTUFF): Add deflex.c.
18 Tue Jun 18 15:03:44 1996 Klaus Kaempf <kkaempf@progis.de>
20 * config.h-vms, makefile.vms: New files.
22 Mon Jun 17 09:47:31 1996 Ian Lance Taylor <ian@cygnus.com>
24 * dlltool.c (make_one_lib_file): Use BFD_RELOC_RVA rather than
25 BFD_RELOC_32 in IDATA7.
27 Wed Jun 12 11:52:06 1996 Ian Lance Taylor <ian@cygnus.com>
29 * nm.c (struct get_relocs_info): Define.
30 (line_numbers): New static variable.
31 (long_options): Add "line-numbers".
32 (usage): Mention -l and --line-numbers.
34 (print_symbol): Print line numbers if requested.
35 (get_relocs): New static function.
36 * binutils.texi, nm.1: Document -l/--line-numbers.
38 Tue Jun 11 20:12:15 1996 Ian Lance Taylor <ian@cygnus.com>
40 * objdump.c (dump_reloc_set): Add sec parameter. Change all
41 callers. If with_line_numbers is set, display line numbers of
43 * binutils.texi, objdump.1: Document -l with -r.
45 Mon Jun 10 23:42:59 1996 Ian Lance Taylor <ian@cygnus.com>
47 * ar.c (open_inarch): Report BFD error message if an archive can
48 not be recognized. List matching formats if the file is
49 ambiguously recognized.
50 (ranlib_touch): Likewise.
52 Thu Jun 6 13:56:14 1996 Ian Lance Taylor <ian@cygnus.com>
54 * README: Add notes on how to build if you don't have ar.
56 * Makefile.in: Remove old incorrect setting of CC.
58 Tue Jun 4 10:52:49 1996 Tom Tromey <tromey@csk3.cygnus.com>
60 * Makefile.in (install): Don't check to see if tooldir exists.
61 Make $(tooldir) and $(tooldir)/bin.
63 Mon Jun 3 17:40:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
65 * strings.c (main): Make main an int function, not void.
67 Fri May 31 13:59:24 1996 Ian Lance Taylor <ian@cygnus.com>
69 * nm.c (filter_symbols): Check for BSF_WEAK as well as
71 * objcopy.c (filter_symbols): Likewise.
73 Wed May 8 16:57:20 1996 Ian Lance Taylor <ian@cygnus.com>
75 * objcopy.c (copy_object): Make clear that it is only a warning
76 when the output file can not represent the architecture.
78 Fri May 3 11:30:17 1996 Ian Lance Taylor <ian@cygnus.com>
80 * objdump.c (disassemble_data): Don't refer to bytes past the end
83 Wed Apr 24 14:10:21 1996 Ian Lance Taylor <ian@cygnus.com>
85 * rddbg.c (read_symbol_stabs_debugging_info): Move call to
86 free_saved_stabs outside the loop over the symbols.
88 Tue Apr 23 12:56:11 1996 Ian Lance Taylor <ian@cygnus.com>
90 * objdump.c (compare_symbols): Sort symbols whose names start with
91 `.' after other symbols. If no other decision can be made, sort
94 Thu Apr 18 16:02:11 1996 Ian Lance Taylor <ian@cygnus.com>
96 * dep-in.sed: Substitute $(BFDDIR) for @BFDDIR@.
97 * Makefile.in: Rebuild dependencies.
98 (dep.sed): Substitute $(BFDDIR) for @BFDDIR@.
100 Tue Apr 16 13:50:22 1996 Ian Lance Taylor <ian@cygnus.com>
102 * rdcoff.c: New file.
103 * rddbg.c (read_debugging_info): Read COFF symbols if COFF flavour
104 and no stabs were found.
105 * budbg.h (parse_coff): Declare.
106 * Makefile.in: Rebuild dependencies.
107 (CFILES): Add rdcoff.c.
108 (DEBUG_OBJS): Add rdcoff.o.
110 Mon Apr 15 15:55:01 1996 Doug Evans <dje@canuck.cygnus.com>
112 * nlmconv.c (choose_temp_base{,_try}): Delete, in libiberty now.
113 (link_inputs): Update call to choose_temp_base.
115 Mon Apr 8 14:40:05 1996 Ian Lance Taylor <ian@cygnus.com>
117 * configure.in: Permit --enable-shared to specify a list of
119 * configure: Rebuild.
121 Fri Mar 29 16:11:33 1996 Ian Lance Taylor <ian@cygnus.com>
123 * objdump.c (dump_section_header): Print the SEC_LINK_ONCE flag
124 and the SEC_LINK_DUPLICATES field.
126 Fri Mar 29 11:35:55 1996 J.T. Conklin (jtc@lisa.cygnus.com)
128 * nlmconv.1: Changed to be recognized by catman -w on Solaris.
130 Thu Mar 28 14:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
132 * wrstabs.c (stab_enum_type): Set buf before using it.
134 Fri Mar 22 15:49:08 1996 Ian Lance Taylor <ian@cygnus.com>
136 * stabs.c (struct stab_handle): Add field abfd.
137 (start_stab): Add abfd parameter.
138 (parse_stab_string): Skip the symbol leading char when searching
139 for the value of a global symbol.
140 * budbg.h (start_stab): Update declaration.
141 * rddbg.c (read_section_stabs_debugging_info): Pass abfd to
143 (read_symbol_stabs_debugging_info): Likewise.
145 Thu Mar 21 12:40:48 1996 Ian Lance Taylor <ian@cygnus.com>
147 * wrstabs.c (stab_function_type): Output an empty typedef for an
148 unused argument, rather than making up a meaningless name.
149 (stab_variable): Use N_RSYM for a DEBUG_REGISTER variable.
151 * ieee.c (struct ieee_info): Add global_vars field.
152 (parse_ieee_be): When ending the global typedef block, copy the
153 variables into info->global_vars.
154 (parse_ieee_atn): Don't require an NN record for a pmisc ATN.
155 (ieee_read_reference): Search the global variables after the local
158 Wed Mar 20 18:08:19 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
160 * objdump.c (disassemble_data): Make sure sym_name is always set.
161 (dump_section_header): Always put a space after the section name.
162 (dump_bfd_header): Terminate output with newline.
164 Wed Mar 20 16:35:20 1996 Ian Lance Taylor <ian@cygnus.com>
166 * wrstabs.c: New file.
167 * budbg.h (write_stabs_in_sections_debugging_info): Declare.
168 * objcopy.c (write_debugging_info): For COFF or ELF, output stabs
170 * Makefile.in: Rebuild dependencies.
171 (CFILES): Add wrstabs.c.
172 (WRITE_DEBUG_OBJS): New variable.
173 ($(OBJCOPY_PROG)): Use $(WRITE_DEBUG_OBJS), not $(DEBUG_OBJS).
174 ($(STRIP_PROG)): Likewise.
176 * stabs.c (parse_stab_members): Make type stub detection more like
179 * ieee.c (struct ieee_handle): Add fields complex_float_index and
180 complex_double_index.
181 (ieee_complex_type): Cache type index in complex_float_index and
182 complex_double_index, depending upon size. Set size on type stack
185 * ieee.c (ieee_empty_type): Use builtin_unknown, not 0.
186 (ieee_void_type): Use builtin_void, not 1.
188 * ieee.c (parse_ieee_ty): Handle 'V' type code.
189 (parse_ieee_atn): Don't require two numbers for type 10.
191 * ieee.c (parse_ieee_be): Add one to offset at end of function or
194 * ieee.c (struct ieee_block): Add field skip.
195 (parse_ieee_bb): Don't call debug_record_function for __XRYCPP
196 function, and set skip field.
197 (parse_ieee_be): Don't call debug_end_function if skip is set.
199 * debug.c (struct debug_handle): Add fields current_write_lineno
200 and current_write_lineno_index.
201 (debug_write): Initialize current_write_lineno and
202 current_write_lineno_index for each unit. Call
203 debug_write_linenos rather than writing out the line numbers
205 (debug_write_function): Call debug_write_linenos.
206 (debug_write_block): Likewise.
207 (debug_write_linenos): New static function.
209 * debug.c (debug_write_type): For DEBUG_KIND_FUNCTION, push return
210 type before arguments.
212 Mon Mar 18 18:05:33 1996 Ian Lance Taylor <ian@cygnus.com>
214 * configure.in: Add AC_FUNC_VFORK.
215 * configure, config.in: Rebuild.
216 * dlltool.c, nlmconv.c: Include <vfork.h> if HAVE_VFORK_H is
219 * stabs.c (parse_stab_range_type): A complex type is defined as a
220 subrange of itself with the high bound zero.
221 * ieee.c (ieee_complex_type): Don't crash on sizes of 12 or 16.
223 Tue Mar 12 12:09:43 1996 Ian Lance Taylor <ian@cygnus.com>
225 * ieee.c (ieee_write_undefined_tag): Switch to global_types even
227 (ieee_tag_type): For an enum, look through info->enums.
229 * configure: Rebuild with autoconf 2.8.
231 * debug.c (debug_type_samep): Don't loop endlessly in
232 DEBUG_KIND_ENUM case. From Eric Baur <ecb@nexen.com>.
234 Mon Mar 11 12:35:03 1996 Ian Lance Taylor <ian@cygnus.com>
236 * rddbg.c (read_section_stabs_debugging_info): Call save_stab for
237 each stab entry, call stab_context on an error, and call
238 free_saved_stabs before rturning.
239 (read_symbol_stabs_debugging_info): Likewise.
240 (SAVE_STABS_COUNT): Define.
241 (struct saved_stab): Define.
242 (saved_stabs, saved_stabs_index): New static variables.
243 (save_stab, stab_context, free_saved_stabs): New static functios.
245 * objdump.c (stab_name): Remove.
246 (struct stab_print): Remove.
247 (stab_print): Remove.
248 (dump_stabs): Don't initialize stab_name.
249 (print_section_stabs): Call bfd_get_stab_name rather than using
252 Tue Feb 27 19:52:01 1996 Ian Lance Taylor <ian@cygnus.com>
254 * prdbg.c (pr_int_constant): Initialize info correctly.
255 (pr_float_constant): Likewise.
257 Mon Feb 26 18:11:37 1996 Stan Shebs <shebs@andros.cygnus.com>
259 * mpw-make.sed: Update to handle shared library support.
261 Sat Feb 24 11:21:49 1996 Alan Modra <alan@spri.levels.unisa.edu.au>:
263 * Makefile.in ($(OBJDUMP_PROG)): Search $(BFDLIB) before
266 Thu Feb 15 12:44:45 1996 Ian Lance Taylor <ian@cygnus.com>
268 * configure.in: Don't tamper with LDFLAGS. Call AC_PROG_CC before
270 * configure: Rebuild.
272 * configure.in: Substitute RPATH_ENVVAR.
273 * configure: Rebuild.
274 * Makefile.in (RPATH_ENVVAR): New variable.
275 (check): Use $(RPATH_ENVVAR) rather than LD_LIBRARY_PATH.
277 * objcopy.c (smart_rename): Rather than doing chmod then chown, do
278 chmod without setuid, then chown, then chmod with setuid.
280 Wed Feb 14 16:46:42 1996 Martin Anantharaman <martin@mail.imech.uni-duisburg.de>
282 * arsup.c (map_over_list): Reindent. Don't assume that the
283 function does not delete the BFD.
284 (ar_addlib_doer): Don't set prev->next if prev is NULL.
286 Wed Feb 14 15:12:17 1996 Ian Lance Taylor <ian@cygnus.com>
288 * ieee.c (ieee_regno_to_genreg): Convert register numbers for m68k
290 (ieee_genreg_to_regno): Likewise.
292 Mon Feb 12 14:19:59 1996 Ian Lance Taylor <ian@cygnus.com>
294 * ieee.c: Extensive changes to write code to put types in the
295 global type block when possible, to output ranges for all memory
296 occupied by the module, and to improve efficiency.
298 * debug.c (struct debug_handle): Remove class_mark field. Add
299 id_list and compare_list fields.
300 (struct debug_class_id): Define.
301 (struct debug_type_compare_list): Define.
302 (debug_write): Initialize info->id_list
303 (debug_write_name): Remove reference to info->class_mark.
304 (debug_write_type): Get id for all structs and classes. Simplify
305 test for whether struct has already been written.
306 (debug_write_class_type): Get id for all classes. Simplify test
307 for whether class has already been written.
308 (debug_write_block): Don't write out blocks other than the top
309 level block if they have no local variables.
310 (debug_set_class_id): New static function.
311 (debug_type_samep): New static function.
312 (debug_class_type_samep): New static function.
313 * prdbg.c (pr_start_struct_type): Always print id.
314 (pr_start_class_type): Likewise.
315 (pr_tag_type): Likewise.
317 * stabs.c (struct stab_handle): Add syms and symcount fields.
318 (start_stab): Add syms and symcount parameters. Change all
320 (parse_stab_string): Look up global variables in the symbol table
321 to get the right value.
322 * budbg.h (start_stab): Update declaration.
323 * rddbg.c (read_section_stabs_debugging_info): Add syms and
324 symcount parameters. Change all callers.
326 * stabs.c (parse_stab_array_type): If the index type is 0, use
329 Wed Feb 7 14:17:45 1996 Ian Lance Taylor <ian@cygnus.com>
331 * ieee.c (ieee_start_compilation_unit): Clear modified and
332 modified_alloc fields of info.
334 * configure.in: Check for --enable-shared. Substitute new
335 variables BFDLIB and OPCODES.
336 * configure: Rebuild.
337 * Makefile.in (BFDLIB): Set to @BFDLIB@.
338 (OPCODES): Set to @OPCODES@.
340 Mon Feb 5 16:18:42 1996 Ian Lance Taylor <ian@cygnus.com>
342 Support for building bfd and opcodes as shared libraries, based on
343 patches from Alan Modra <alan@spri.levels.unisa.edu.au>:
344 * configure.in (HLDFLAGS): New substitution.
345 * configure: Rebuild.
346 * Makefile.in (HLDFLAGS): New variable. Make all links use
347 $(HLDFLAGS) before $(CFLAGS) and $(LDFLAGS).
348 (BFDLIB_DEP): New variable. Replace all occurrences of $(BFD) as
349 a dependency with $(BFDLIB_DEP). Remove $(BFD) as a dependency if
350 there is also a dependency on $(ADDL_DEPS).
351 (BFDLIB): Rename from BFD; change all uses; set to -L../bfd -lbfd.
352 (OPCODES_DEP): New variable. Replace all occurrends of $(OPCODES)
353 as a dependency with $(OPCODES_DEP).
354 (OPCODES): Set to -L../opcodes -lopcodes.
355 (ADDL_DEPS): New variable. Replace all occurrences of
356 $(ADDL_LIBS) as a dependency with $(ADDL_DEPS).
357 (check): Set LD_LIBRARY_PATH in the environment.
358 (config.status): Depend upon BFD configure.host and config.bfd.
360 Fri Feb 2 17:02:59 1996 Doug Evans <dje@charmed.cygnus.com>
362 * objdump.c: #include stdarg.h or varargs.h.
363 (objdump_print_value): Change FILE* arg to struct disassemble_info*.
364 All callers updated. Use fprintf_func.
365 (objdump_print_address): Consistently use fprintf_func.
366 (objdump_sprintf): New function.
367 (disassemble_data): Print insn into a buffer, print raw insn ourselves,
368 then print insn mnemonic.
370 Fri Feb 2 16:48:55 1996 Ian Lance Taylor <ian@cygnus.com>
372 * configure: Regenerate.
374 Thu Feb 1 09:38:18 1996 Steve Chamberlain <sac@slash.cygnus.com>
376 * configure.in (i[3-6]86-*-win32): Becomes i[3-6]86-*-cygwin32.
377 (powerpc*-*-cygwin32): New.
378 * configure: Regenerated.
380 Wed Jan 31 13:22:03 1996 Richard Henderson <rth@tamu.edu>
382 * Makefile.in (distclean): Remove $(DEMANGLER_PROG).1.
384 Mon Jan 29 17:36:29 1996 Ian Lance Taylor <ian@cygnus.com>
386 Based on patches from H J Lu <hjl@zoom.com>:
387 * objcopy.c (remove_leading_char): New static variable.
388 (OPTION_REMOVE_LEADING_CHAR): Define.
389 (copy_usage): Mention --remove-leading-char.
390 (filter_symbols): If remove_leading_char, and the first character
391 of a global symbol matches the symbol leading char of the BFD,
392 remove the first character.
393 (copy_object): Filter the symbols if remove_leading_char is set.
394 (copy_main): Handle --remove-leading-char.
395 * binutils.texi, objcopy.1: Document --remove-leading-char.
397 Sat Jan 27 15:40:13 1996 Michael Meissner <meissner@tiktok.cygnus.com>
399 * objdump.c (fprintf): Add prototype to avoid compiler warning on
402 Fri Jan 26 11:53:42 1996 Ian Lance Taylor <ian@cygnus.com>
404 * binutils.texi (nm): Improve documentation on symbol types.
405 (objdump): Reference the stabs manual from the discussion of the
408 Thu Jan 25 11:21:46 1996 Raymond Jou <rjou@mexican.cygnus.com>
410 * mpw-make.sed: Add a "stamps" target.
412 Thu Jan 25 13:51:44 1996 Ian Lance Taylor <ian@cygnus.com>
414 * objdump.c (dump_headers, dump_section_header): Change objdump -h
415 output to be simpler and to include section file offsets.
417 Wed Jan 24 12:06:05 1996 Ian Lance Taylor <ian@cygnus.com>
419 * stabs.c (parse_stab_members): Don't adjust voffset.
421 * ieee.c (ieee_read_cxx_class): Don't multiply voffset by 4.
422 (struct ieee_write_type): Add name field.
423 (struct ieee_type_class): Remove name field. Change all uses to
424 use new name field in type instead.
425 (struct ieee_name_type): Likewise.
426 (ieee_start_struct_type): Initialize name field of type.
427 (ieee_start_class_type): Don't initialize classdef entry of tag.
428 (ieee_class_method_var): Don't adjust voffset.
429 (ieee_end_class_type): Likewise.
430 (ieee_tag_type): Initialize new name field of type.
431 (ieee_typdef): Set name after copying in type information.
433 * debug.c (VOFFSET_STATIC_METHOD): Define as -1, not 1.
435 * ieee.c (struct ieee_modified_type): Define.
436 (struct ieee_handle): Add modified and modified_alloc fields.
437 (ieee_get_modified_info): New static function.
438 (ieee_pointer_type): Cache type index.
439 (ieee_const_type): Likewise.
440 (ieee_volatile_type): Likewise.
442 * ieee.c (ieee_define_named_type): When creating a tag for an
443 anonymous struct, copy the name into memory.
444 (ieee_tag_type): Likewise.
445 * debug.c (debug_write_type): Only check and set id field for an
447 (debug_write_class_type): Likewise.
449 * ieee.c: Various changes to write out types for functions and
450 references, and to not write out unnecessary function types.
452 * ieee.c (struct ieee_var): Remove variable field. Add kind
453 field, and define some enum constants for it.
454 (parse_ieee_ty): Set kind field of variable for 'x' and 'X' types.
455 (parse_ieee_atn): Make an indirect slot for an external variable,
456 although we otherwise don't record it. Set kind field rather than
457 variable field of pvar.
458 (ieee_read_cxx_class): Try to get the type of a static member.
459 (ieee_read_reference): Check kind field rather than variable
462 Tue Jan 23 15:54:18 1996 Ian Lance Taylor <ian@cygnus.com>
464 * ieee.c: Various changes to handle reading C++ reference type
467 * debug.h (enum debug_var_kind): Add DEBUG_VAR_ILLEGAL.
468 (enum debug_parm_kind): Add DEBUG_PARM_ILLEGAL.
469 * debug.c (debug_get_parameter_types): Handle DEBUG_KIND_FUNCTION.
471 * ieee.c: Various changes to write out definitions of C++ classes.
473 * debug.c (debug_append_filename): Remove.
474 * debug.h (debug_append_filename): Don't declare.
476 * stabs.c (struct stab_handle): Remove last_type field. Add
477 so_string and so_value fields.
478 (finish_stab): Call stab_emit_pending_vars before calling
479 debug_end_function. Don't warn about pending variables.
480 (parse_stab): Accumulate N_SO strings until a non N_SO symbol is
481 seen, rather than calling debug_append_filename. Call
482 stab_emit_pending_vars before calling debug_end_function. Don't
485 Tue Jan 23 09:53:54 1996 Doug Evans <dje@charmed.cygnus.com>
487 * objdump.c (disassemble_data): Handle unknown endianness.
488 Pass fprintf to INIT_DISASSEMBLE_INFO.
490 Mon Jan 22 16:46:43 1996 Doug Evans <dje@charmed.cygnus.com>
492 Add new option --show-raw-insn.
493 * objdump.c (show_raw_insn): New global.
495 (long_options): Update.
496 (disassemble_data): Set disasm_info.flags if --show-raw-insn.
498 * objdump.c (disassemble_data): Set new arch,mach,endian fields in
501 Mon Jan 22 19:29:36 1996 Ian Lance Taylor <ian@cygnus.com>
503 * ieee.c: Extensive changes to pass a single info argument around
504 in the reading routines, rather than several arguments. Add code
505 to read C++ debugging records.
507 * debug.h (debug_get_type_size): Declare.
508 (debug_get_field_name): Declare.
509 (debug_get_field_bitpos): Declare.
510 (debug_get_field_bitsize): Declare.
511 (debug_get_field_visibility): Declare.
512 (debug_get_field_physname): Declare.
513 * debug.c (debug_get_real_type): Handle DEBUG_KIND_TAGGED.
514 (debug_get_type_size): New function.
515 (debug_get_field_name): New function.
516 (debug_get_field_bitpos): New function.
517 (debug_get_field_bitsize): New function.
518 (debug_get_field_visibility): New function.
519 (debug_get_field_physname): New function.
520 (debug_write_type): Make sure we pass the real kind, not INDIRECT,
521 to tag_type. Pass the name recursively for INDIRECT.
523 Fri Jan 19 12:31:57 1996 Ian Lance Taylor <ian@cygnus.com>
525 * debug.h (struct debug_write_fns): Remove ellipsis_type. Add int
526 and boolean parameters to function_type. Add boolean parameter to
528 (debug_make_ellipsis_type): Don't declare.
529 (debug_make_function_type): Add debug_type * and boolean
530 parameters. Change all callers.
531 (debug_make_method_type): Add boolean parameter. Change all
533 (debug_get_parameter_types): Add boolean * parameter. Change all
535 (debug_get_target_type): Declare.
536 * debug.c (struct debug_function_type): Add fields arg_types and
538 (struct debug_method_type): Add field varargs.
539 (debug_ellipsis_type, ELLIPSIS_P): Remove.
540 (debug_make_ellipsis_type): Remove.
541 (debug_make_function_type): Add arg_types and varargs parameters.
542 (debug_make_method_type): Add varargs parameter.
543 (debug_get_parameter_types): Add pvarargs parameter.
544 (debug_get_target_type): New function.
545 (debug_write_type): In case DEBUG_KIND_FUNCTION, push argument
546 types and pass count to function_type. In DEBUG_KIND_METHOD, use
547 a signed int for the count, don't call ellipsis_type, and pass
548 varargs to method_type.
549 * stabs.c (struct stab_demangle_info): Add varargs field.
550 (stab_demangle_argtypes): Add pvarargs parameter. Change all
552 (stab_demangle_args): Likewise.
553 (stab_demangle_type): In case 'F', pick up argument types.
554 * prdbg.c (pr_ellipsis_type): Remove.
555 (pr_function_type): Add argcount and varargs parameters.
556 (pr_method_type): Add varargs parameter.
557 * ieee.c (ieee_ellipsis_type): Remove.
558 (ieee_function_type): Add argcount and varargs parameters.
559 (ieee_method_type): Add varargs parameter. Remove most of
560 function body, and just call ieee_function_type.
562 * stabs.c: Include "demangle.h". Added several new static
563 functions not listed below to demangle argument types; they are
564 all called via stab_demangle_argtypes.
565 (finish_stab): If the kind of an undefined tag is
566 DEBUG_KIND_ILLEGAL, use DEBUG_KIND_STRUCT instead. Warn if there
567 are any pending variable.
568 (parse_stab): Don't close the function when the block depth goes
569 to zero. Pass value to debug_end_function.
570 (parse_stab_string): In case 'T', pass the name to
572 (parse_stab_type): In case 'x', use stab_find_tagged_type. In
573 case '#', handle functions with variable numbers of arguments.
574 (parse_stab_struct_type): Add tagname parameter. Change all
576 (parse_stab_members): Add tagname and typenums parameters. Change
577 all callers. If the type of a method is a stub, call
578 parse_stab_argtypes to demangle the argument types and get the
579 physical name of the function.
580 (parse_stab_argtypes): New static function.
581 (stab_record_variable): For a DEBUG_GLOBAL or DEBUG_STATIC
582 variable, call debug_record_variable immediately.
583 (stab_find_tagged_type): New static function.
585 * debug.h (enum debug_type_kind): Add DEBUG_KIND_ILLEGAL.
586 (struct debug_write_fns): Add field ellipsis_type. Add id
587 parameter to start_struct_type, start_class_type, and tag_type.
588 (debug_make_ellipsis_type): Declare.
589 (debug_find_named_type): Declare.
590 (debug_get_type_kind): Declare.
591 (debug_get_return_type): Declare.
592 (debug_get_parameter_types): Declare.
593 (debug_get_fields): Declare.
594 (debug_get_field_type): Declare.
595 * debug.c (struct debug_handle): Add fields class_id and base_id.
596 (struct debug_class_type): Add field id.
597 (struct debug_method_variant): Rename argtypes to physname.
599 (debug_ellipsis_type): New static variable.
600 (ELLIPSIS_P): New macro.
601 (debug_make_ellipsis_type): New function.
602 (debug_make_method_variant): Rename argtypes to physname.
603 (debug_make_static_method_variant): Likewise.
604 (debug_name_type): Always put types in the global namespace.
605 (debug_find_named_type): New function.
606 (debug_find_tagged_type): Treat DEBUG_KIND_ILLEGAL specially,
607 rather than DEBUG_KIND_VOID.
608 (debug_get_real_type): New static function.
609 (debug_get_type_kind): New function.
610 (debug_get_return_type): New function.
611 (debug_get_parameter_types): New function.
612 (debug_get_fields): New function.
613 (debug_get_field_type): New function.
614 (debug_write): Initialize base_id.
615 (debug_write_type): Pass new id argument to tag_type. Handle
616 DEBUG_KIND_ILLEGAL. Use id for DEBUG_KIND_STRUCT and
617 DEBUG_KIND_UNION. Handle ellipsis for method arguments.
618 (debug_write_class_type): Don't dereference kclass if it is NULL.
620 * prdbg.c (pr_fns): Add pr_ellipsis_type.
621 (pr_ellipsis_type): New static function.
622 (pr_pointer_type): If this is a pointer to an array, parenthesize
624 (pr_start_struct_type): Add id parameter.
625 (pr_start_class_type): Likewise.
626 (pr_tag_type): Likewise.
627 (pr_fix_visibility): Add the visibility to the top of the stack,
628 not the second element on the stack.
629 (pr_struct_field): Pop the stack before calling pr_fix_visibility.
630 (pr_class_static_member): Likewise.
631 (pr_class_start_method): Don't push a type, just set the method
632 name in the type on the top of the stack.
633 (pr_class_end_method): Don't pop the stack.
634 (pr_class_method_variant): Rename argtypes parameter to physname.
635 Append const and volatile rather than prepending them. Add a
636 space after the physname.
637 (pr_class_static_method_variant): Likewise.
638 * ieee.c (ieee_fns): Add ieee_ellipsis_type.
639 (ieee_define_named_type): Use DEBUG_KIND_ILLEGAL rather than
641 (write_ieee_debugging_info): Likewise.
642 (ieee_typdef): Likewise.
643 (ieee_ellipsis_type): New static function.
644 (ieee_start_struct_type): Add id parameter.
645 (ieee_start_class_type): Likewise.
646 (ieee_tag_type): Likewise.
647 (ieee_class_method_variant): Rename name to physname.
648 (ieee_class_static_method_variant): Likewise.
650 * Makefile.in (DEBUG_OBJS): Remove prdbg.o.
651 ($(OBJDUMP_PROG)): Depend upon, and link against, prdbg.o.
653 Thu Jan 18 17:35:06 1996 Kim Knuttila <krk@cygnus.com>
655 * dlltool.c (make_tail): Changed the order of the sections to avoid
656 an alignment problem.
658 Wed Jan 17 14:23:00 1996 J.T. Conklin <jtc@rtl.cygnus.com>
660 * srconv.c (wr_du): Set du.stackfrmt to 0.
661 (wr_un, wr_sc): Emit all sections, even those with 0 size.
663 Tue Jan 16 16:15:49 1996 J.T. Conklin <jtc@rtl.cygnus.com>
665 * srconv.c (wr_hd): Space size within segment was being
666 stored in segment identifier field.
668 Tue Jan 16 12:07:25 1996 Stan Shebs <shebs@andros.cygnus.com>
670 * mpw-config.in (BUILD_NLMCONV, BUILD_SRCONV, SYSINFO_PROG,
671 BUILD_DLLTOOL): Put definitions for these into makefile when
672 configuring, instead of always clearing in mpw-make.sed.
673 * mpw-make.sed: Edit out any host_alias or target_alias settings,
674 fix pathname to BFD internal include files, remove dependency
677 Thu Jan 11 17:31:38 1996 Michael Meissner <meissner@tiktok.cygnus.com>
679 * objdump.c (dump_section_header): Add new section flags
680 SEC_{EXCLUDE,SORT_ENTRIES}.
682 Thu Jan 11 11:45:34 1996 Ian Lance Taylor <ian@cygnus.com>
684 * objcopy.c (filter_symbols): NULL terminate the output symbols.
685 (copy_object): Allocate space for a possible extra NULL pointer.
687 * debug.c (debug_make_undefined_tagged_type): Make sure we are
688 given a kind of type we can handle.
689 (debug_write_type): Handle undefined enums and structs.
690 (debug_write_class_type): Handle undefined classes.
691 * prdbg.c (pr_enum_type): Handle an undefined enum.
692 * ieee.c (ieee_enum_type): Likewise.
694 Wed Jan 10 15:33:18 1996 Ian Lance Taylor <ian@cygnus.com>
696 * Makefile.in: Updated dependencies.
697 (ALLOCA, MALLOC): Remove variables.
698 (ADDL_LIBS): Remove $(MALLOC) from definition.
699 * alloca.c, gmalloc.c: Remove.
701 Mon Jan 8 18:02:29 1996 Ian Lance Taylor <ian@cygnus.com>
703 * ieee.c: Add global function write_ieee_debugging_info and a
704 bunch of static functions and structs used to write out IEEE
705 debugging information.
706 * budbg.h (write_ieee_debugging_info): Declare.
708 * ieee.c (struct ieee_type): Add pslot field.
709 (enum builtin_types): Define.
710 (ieee_builtin_type): For a pointer, return a pointer to the named
711 type. Use enum values rather than numbers.
712 (ieee_alloc_type): New static function.
713 (ieee_read_type_index): Use ieee_alloc_type.
714 (parse_ieee_bb): Likewise.
715 (parse_ieee_ty): Likewise. Use ieee_builtin_type for array range,
716 rather than making a new integer type. Store the new type in the
717 slot, if there is one.
718 (parse_ieee_atn): Treat ATN10 as defining a register variable.
719 (ieee_regno_to_genreg): Rename from ieee_regno_to_gen. Change all
721 (ieee_genreg_to_regno): New static function.
723 * stabs.c (parse_stab_type): Add new typename parameter. Change
725 (parse_stab_range_type): Add new typename parameter. Change all
728 * debug.h (struct debug_write_fns): Add tag parameter to
729 enum_type, start_struct_type, and start_class_type.
730 * debug.c (debug_write_type): Pass any tag name to
731 start_struct_type, debug_write_class_type, and enum_type. If
732 DEBUG_KIND_TAGGED, pass the name in the recursive call.
733 (debug_write_class_type): Accept a new tag parameter, and pass it
735 * prdbg.c (pop_type): Don't remove '+' character.
736 (pr_enum_type): Accept and use tag parameter.
737 (pr_start_struct_type): Likewise.
738 (pr_start_class_type): Likewise.
739 (pr_class_baseclass): Adjust algorithm used to find where to put
741 (pr_tag): Don't bother to insert the tag name.
743 * objcopy.c: Include budbg.h.
744 (convert_debugging): New static variable.
745 (OPTION_DEBUGGING): Define.
746 (copy_options): Add "debugging".
747 (copy_usage): Mention --debugging.
748 (is_strip_section): Skip debugging sections if convert_debugging.
749 (setup_section, copy_section): Likewise.
750 (filter_symbols): Skip debugging symbols if convert_debugging.
751 (copy_object): If convert_debugging, read and write debugging
753 (write_debugging_info): New static function.
754 (copy_main): Handle --debugging.
755 * Makefile.in (DEBUG_OBJS): New variable.
756 ($(OBJCOPY_PROG)): Depend upon and link against $(DEBUG_OBJS).
757 ($(STRIP_PROG)): Likewise.
758 (OBJDUMP_OBJS): Remove variable.
759 ($(OBJDUMP_PROG)): Use objdump.o $(DEBUG_OBJS) rather than
761 * binutils.texi, objcopy.1: Document --debugging.
763 Thu Jan 4 16:31:21 1996 Ian Lance Taylor <ian@cygnus.com>
765 * ieee.c: New file with code to read IEEE debugging information.
766 * budbg.h (parse_ieee): Declare.
767 * rddbg.c (read_debugging_info): Handle IEEE flavour files.
768 (read_ieee_debugging_info): New static function.
769 * Makefile.in: Rebuild dependencies.
770 (CFILES): Add ieee.c.
771 (OBJDUMP_OBJS): Add ieee.o.
773 * bucomm.h (xrealloc): Change type of first parameter from char *
776 Tue Jan 2 17:44:07 1996 Ian Lance Taylor <ian@cygnus.com>
778 * Makefile.in: Add targets to automatically rebuild dependencies.
779 Remove targets which just listed dependencies of .o files.
781 (HFILES, GENERATED_HFILES): New variables.
782 (CFILES, GENERATED_CFILES): New variables.
783 (underscore.c): Don't do anything, just depend upon stamp-under.
784 (stamp-under): New target; do what underscore.c used to do.
785 (nlmconv.o): Depend upon sym.h and ecoff.h.
786 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
787 (stage1, stage2, stage3, against, comparison): Remove.
788 (de-stage1, de-stage2, de-stage3): Remove.
789 (clean, distclean): Remove stamp-under and dep.sed.
790 * dep-in.sed: New file.
792 Implement generic debugging support. Implement a stabs reader and
794 * budbg.h, debug.c, debug.h, prdbg.c, rddbg.c, stabs.c: New files.
795 * objdump.c: Include "debug.h" and "budbg.h".
796 (dump_debugging): New global variable.
797 (usage): Mention --debugging.
798 (long_options): Add "debugging".
799 (display_bfd): Handle --debugging.
800 * Makefile.in (OBJDUMP_OBJS): New variable.
801 ($(OBJDUMP_PROG)): Use $(OBJDUMP_OBJS).
802 * binutils.texi, objdump.1: Document --debugging.
804 Sat Dec 30 09:59:51 1995 Jeffrey A Law (law@cygnus.com)
806 * nm.c ( long_options): Add "--defined-only" option.
807 (usage): Update for new "--defined-only" option.
808 (filter_symbols): Handle "--defined-only".
810 Fri Dec 29 16:04:56 1995 Ian Lance Taylor <ian@cygnus.com>
812 * arparse.y: Include "bucomm.h", not <sysdep.h>.
813 * nlmheader.y: Don't include "sysdep.h".
815 Tue Dec 26 18:23:18 1995 Ian Lance Taylor <ian@cygnus.com>
817 * nm.c (print_symdef_entry): Check return value of
818 bfd_get_elt_at_index.
820 Sat Dec 23 11:03:16 1995 Michael Meissner <meissner@tiktok.cgynsu.com>
822 * configure.in (DLLTOOL_DEFS): Build dlltool for PowerPC if target
823 is powerpc*-*-win* in addition to powerpc*-*-*pe*.
825 Fri Dec 15 16:30:57 1995 Ian Lance Taylor <ian@cygnus.com>
827 * objdump.c (endian_string): New static function.
828 (display_target_list): Use it.
829 * nlmconv.c (main): Use new bfd_big_endian macro.
831 Fri Dec 15 07:51:34 1995 steve chamberlain <sac@slash.cygnus.com>
833 * dlltool.c (fill_ordinals): Start from 1 if no other instructions
836 Tue Dec 12 12:05:21 1995 Ian Lance Taylor <ian@cygnus.com>
838 * Makefile.in (clean): Remove $(DEMANGLER_PROG).1. From Ronald
839 F. Guilmette <rfg@monkeys.com>.
841 Mon Dec 11 14:33:05 1995 Stan Shebs <shebs@andros.cygnus.com>
843 * mac-binutils.r: Fix copyright and version strings.
845 * Makefile.in (version): Remove, no longer used.
847 Fri Dec 1 14:41:56 1995 Stan Shebs <shebs@andros.cygnus.com>
849 * mpw-make.sed (install, install-only): Edit in Mac-specific
852 Thu Nov 30 20:26:02 1995 Kim Knuttila <krk@cygnus.com>
854 * dlltool.c (ppc_jtab): The binary glue for PowerPC dll linkage,
855 including the return instruction.
856 sinfo: added a preferred alignment field.
857 (secdata): section data for the PowerPC version.
858 (make_one_lib_file): More symbols, More sections (pdata, rdata)
859 (make_tail): Use idata$6 instead of idata$7 for ppc. Also added a
860 NULL idata$3 descriptor (temporary).
862 Tue Nov 28 17:23:44 1995 Doug Evans <dje@canuck.cygnus.com>
864 * dlltool.c (fill_ordinals): Don't reference d_export_vec if
865 there are no exported functions.
867 Mon Nov 27 13:05:59 1995 Ian Lance Taylor <ian@cygnus.com>
869 * configure: Regenerate with autoconf 2.7.
871 Wed Nov 22 13:17:15 1995 Ian Lance Taylor <ian@cygnus.com>
873 * dlltool.c (fill_ordinals): Start assigning ordinals at 1.
875 * Makefile.in (EXPECT): Use $$r, not $${rootme}.
876 (check): Set r, not rootme.
878 Tue Nov 21 18:04:09 1995 Ian Lance Taylor <ian@cygnus.com>
880 * configure.in: Use BFD_NEED_DECLARATION.
881 * acconfig.h: Put NEED_DECLARATION_FPRINTF in @TOP@ section.
882 * configure, config.in: Rebuild with autoconf 2.6.
884 Fri Nov 17 10:34:37 1995 Ian Lance Taylor <ian@cygnus.com>
886 * Makefile.in (CC_FOR_TARGET): Use @host@ and @target@, not
887 $(host_canonical) and $(target_canonical).
889 Thu Nov 16 03:39:20 1995 Ken Raeburn <raeburn@cygnus.com>
891 Version 2.6 released.
892 * Makefile.in (VERSION): Update to 2.6.
894 Wed Nov 15 12:14:17 1995 Ian Lance Taylor <ian@cygnus.com>
896 * Makefile.in (CC_FOR_TARGET): Define.
897 (check): Pass CC and CFLAGS to runtest.
899 * nm.c (display_rel_file): Don't require a DYNAMIC object when
900 dumping the dynamic symbol table.
902 * objdump.c (compare_symbols): Sort global symbols before local
903 symbols before debugging symbols.
904 (objdump_print_address): Don't futz around looking for a global
905 symbol with the same value.
907 Tue Nov 14 17:19:11 1995 Ian Lance Taylor <ian@cygnus.com>
909 * dlltool.c: Use FOPEN_* macros rather than "r" or "w".
911 * dlltool.c (fill_ordinals): Correct memset call.
913 Sun Nov 12 12:56:05 1995 Stan Shebs <shebs@andros.cygnus.com>
915 * mpw-make.sed (DEMANGLER_PROG): Edit out attempts to do anything
918 Fri Nov 10 11:41:22 1995 Ian Lance Taylor <ian@cygnus.com>
920 * objcopy.c (setup_section): Copy the section lma independently of
923 Wed Nov 8 11:33:00 1995 Ian Lance Taylor <ian@cygnus.com>
925 * arsup.c (ar_open): Cast malloc return value.
927 Tue Nov 7 09:01:26 1995 Kim Knuttila <krk@cygnus.com>
929 * configure.in, configure (DLLTOOL_DEFS): Added ppc target.
930 * dlltool.c (MPPC): Added basic PPC definitions.
932 Tue Nov 7 14:02:57 1995 Ian Lance Taylor <ian@cygnus.com>
934 * configure.in: Don't treat rs6000-*-lynx* specially.
935 * configure: Rebuild.
936 * config/rslynx: Remove.
937 * Makefile.in: Remove @target_makefile_fragment@.
939 Mon Nov 6 15:00:50 1995 Ian Lance Taylor <ian@cygnus.com>
941 * bucomm.h: Include <sys/types.h>.
942 * ar.c: Don't include <sys/types.h> or <stdio.h>.
943 * bucomm.c, dlltool.c, nlmconv.c, objcopy.c, objdump.c: Likewise.
945 Fri Nov 3 12:38:09 1995 Ian Lance Taylor <ian@cygnus.com>
947 * objdump.c: Include <sys/types.h>.
949 Permit user to override DEMANGLER_PROG from command line. From
950 Manfred Hollstein <manfred@lts.sel.alcatel.de>.
951 * Makefile.in ($(DEMANGLER_PROG)): Depend upon
953 (install): Don't depend upon $(DEMANGLER_PROG).1. Only install
954 $(DEMANGLER_PROG).1 if $(DEMANGLER_PROG) is not empty.
956 Wed Nov 1 15:04:57 1995 Manfred Hollstein KS/EF4A 60/1F/110 #40283 <manfred@lts.sel.alcatel.de>
958 * Makefile.in (syslex.o): add -I$(srcdir) if compiling in a
961 Mon Oct 30 14:24:18 1995 Ian Lance Taylor <ian@cygnus.com>
963 * objdump.c (objdump_print_value): New static function.
964 (objdump_print_address): Use it. If we need the right section for
965 the symbol, and we can't find it, print an offset from the section
966 rather than using a symbol from some other section.
968 Thu Oct 26 10:23:14 1995 steve chamberlain <sac@slash.cygnus.com>
970 * dlltool.c (no_idata4, no_idata5): New.
971 (arm_jtab): Use correct encoding of jump instruction.
972 (usage, main, make_head, make_tail): Act on no_idata4, no_idata5.
974 Wed Oct 25 12:10:07 1995 Stan Shebs <shebs@andros.cygnus.com>
976 * mpw-make.sed: Edit paths to generated y.tab.[ch] files.
978 Fri Oct 20 18:40:34 1995 Ian Lance Taylor <ian@cygnus.com>
980 * binutils.texi: Change --with-targets to --enable-targets.
982 Thu Oct 19 17:47:41 1995 Fred Fish <fnf@cygnus.com>
984 * Makefile.in: Remove extraneous tab on otherwise empty line,
985 which confuses many non-GNU versions of "make".
987 Wed Oct 18 16:31:58 1995 steve chamberlain <sac@slash.cygnus.com>
989 * dlltool.c (i386_jtab, arm_jtab): New
990 (gen_lib_file): Rewritten to use bfd.
992 Fri Oct 13 16:10:07 1995 Michael Meissner <meissner@tiktok.cygnus.com>
994 * Makefile.in (install): Don't give error message if dlltool
997 Fri Oct 13 11:04:37 1995 steve chamberlain <sac@slash.cygnus.com>
999 * deflex.l: Allow quoting of IDs.
1000 * defparse.y (%union): string deleted.
1001 (command): DESCRIPTION takes ID.
1002 * dlltool.c (gen_def_file): Quote outgoing name if
1003 necessary. Preserve NONAME.
1004 (gen_lib_file): Run ranlib.
1005 (workout_prefix): Deleted.
1006 (main, usage, long_options): Add --as, --ranlib, --ar options.
1008 Wed Oct 11 13:36:13 1995 steve chamberlain <sac@slash.cygnus.com>
1010 * dlltool.c (mtable): HOW_ALIGN_LONG, new.
1012 (d_low_ord, d_high_ord, d_named_funcs): New.
1013 (gen_exp_file): Create noname entries correctly.
1014 (gen_lib_file): Dump exports alphabetically.
1015 (process_duplicates): Count nonamed functions.
1016 (fill_ordinals): Keep track of highest ord too.
1017 (mangle_defs): Create alphabetically ordered list of names.
1019 Tue Oct 10 09:39:09 1995 steve chamberlain <sac@slash.cygnus.com>
1021 * Makefile.in (TOOL_PROGS): Include DLLTOOL_PROG.
1023 Mon Oct 9 13:06:31 1995 steve chamberlain <sac@slash.cygnus.com>
1025 * dlltool.c (add_underscore): New.
1026 (xlate): Use new name.
1027 (main, usage): Update.
1029 Fri Oct 6 14:08:51 1995 Ken Raeburn <raeburn@cygnus.com>
1031 * sysinfo.y: Eliminate unused terminals "[" and "]" and unused
1032 nonterminal "name". One s/r conflict remains.
1034 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1036 * nm.c (print_symname): Don't try to demangle an empty
1038 * objdump.c (slurp_symtab): Reset symcount if there are
1040 (slurp_dynamic_symtab): Likewise, for dynsymcount.
1041 (disassemble_data): Fix memory leak: free sorted_syms when done.
1042 (display_bfd): Likewise, for syms and dynsyms.
1043 (dump_relocs): Don't print header before possibly generating an
1045 (dump_dynamic_relocs): Likewise.
1047 * ar.1, nm.1, objdump.1, size.1, strings.1, strip.1: Fix typos and
1050 Fri Oct 6 12:00:25 1995 Ian Lance Taylor <ian@cygnus.com>
1052 * ar.c (do_quick_append): Comment out.
1053 (replace_members): Add quick argument.
1054 (main): Don't call do_quick_append.
1055 (open_inarch): Don't call quick_append to create an empty archive.
1056 Instead call bfd_openw/bfd_set_format/bfd_close.
1058 Thu Oct 5 20:53:08 1995 Ken Raeburn <raeburn@cygnus.com>
1060 * bucomm.c: Always include time.h.
1062 Thu Oct 5 17:25:21 1995 Ian Lance Taylor <ian@cygnus.com>
1064 * objdump.c (compare_symbols): Sort gnu_compiled and gcc2_compiled
1065 symbols after other symbols with the same value. Likewise for
1066 symbols which look like file names.
1067 (objdump_print_address): Always chose the first reasonable symbol
1070 Tue Oct 3 22:38:55 1995 Ian Lance Taylor <ian@cygnus.com>
1072 * arsup.c (ar_save): Use rename, not unlink/link/unlink.
1074 Mon Oct 2 12:10:25 1995 Ian Lance Taylor <ian@cygnus.com>
1076 * strings.c (main): Exit with zero status if no files are given
1077 and standard input is read.
1079 Thu Sep 28 20:03:07 1995 Stan Shebs <shebs@andros.cygnus.com>
1081 * mpw-config.in: Calculate underscore and put into makefile
1082 fragment, generate config.h.
1083 * mpw-make.sed: New file, sed commands to edit Unix makefile
1085 * mpw-make.in: Remove.
1086 * mac-binutils.r: New file, Mac resources.
1088 Thu Sep 28 15:49:00 1995 steve chamberlain <sac@slash.cygnus.com>
1090 * dlltool.c: (gen_exp_file): Always emit a .reloc section if
1092 (imp_name_lab): New.
1093 (gen_def_file): New.
1094 (gen_lib_file): Use imp_name_lab.
1095 (main): Initialize imp_name_lab.
1097 Mon Sep 25 12:05:34 1995 Ian Lance Taylor <ian@cygnus.com>
1099 * configure.in: Call AC_HEADER_SYS_WAIT.
1100 * configure: Rebuild.
1101 * config.in: Rebuild.
1102 * dlltool.c: Include "libiberty.h" and "bucomm.h". Don't include
1103 <stdio.h>, <stdlib.h>, or <string.h>. Don't include <wait.h>.
1104 Include <sys/types.h>. Use HAVE_SYS_WAIT_H to control whether to
1105 include <sys/wait.h> or define the wait macros by hand. Don't
1107 (gen_lib_file): Don't assume that sprintf returns the number of
1108 characters; use strlen instead.
1110 Fri Sep 22 17:16:41 1995 Ian Lance Taylor <ian@cygnus.com>
1112 * objdump.c (disassemble_data): Don't use the old BFD based
1113 disassembler interface. Make info a const pointer.
1115 Wed Sep 13 18:33:44 1995 Ian Lance Taylor <ian@cygnus.com>
1117 * objdump.c (start_address): New variable.
1118 (stop_address): New variable.
1119 (usage): Mention --start-address and --stop-address.
1120 (OPTION_START_ADDRESS, OPTION_STOP_ADDRESS): Define.
1121 (long_options): Add "start-address" and "stop-address".
1122 (disassemble_data): Handle start_address and stop_address.
1123 (dump_data, dump_reloc_set): Likewise.
1124 (main): Don't set seenflag for -l. Handle OPTION_START_ADDRESS
1125 and OPTION_STOP_ADDRESS.
1126 * objcopy.c (parse_vma): Move to bucomm.c.
1127 * bucomm.c (parse_vma): New function, moved in from objcopy.c.
1128 * bucomm.h (parse_vma): Declare.
1129 * binutils.texi, objdump.1: Document new objdump options.
1131 Tue Sep 12 12:37:39 1995 Ian Lance Taylor <ian@cygnus.com>
1133 * Makefile.in (maintainer-clean): New target.
1135 * ar.c (replace_members): Don't call write_archive if nothing
1138 * objdump.c (disassemble_data): Add casts to avoid gcc warnings.
1140 Thu Sep 7 12:12:17 1995 Ian Lance Taylor <ian@cygnus.com>
1142 * config.in: Rename from config.h.in.
1143 * configure.in: Call AC_CONFIG_HEADER with config.h:config.in.
1144 Check for config.h:config.in when creating stamp-h.
1145 * configure: Rebuild.
1146 * Makefile.in (stamp-h): Depend upon config.in rather than
1147 config.h.in. Set CONFIG_HEADERS to config.h:config.in when
1148 calling config.status.
1150 * Makefile.in (distclean): Remove config.h, stamp-h, and
1153 * nm.c (value_format): Initialize based on BFD64 and
1154 BFD_HOST_64BIT_LONG.
1155 (print_radix): New static variable.
1156 (set_print_radix): Set print_radix. Adjust changes to
1158 (print_value): New static function, to print 64 bit octal and
1159 decimal values correctly.
1160 (print_symbol_info_bsd): Check BFD64, not BFD_HOST_64_BIT. Use
1162 (print_symbol_info_sysv): Use print_value.
1163 (print_symbol_info_posix): Likewise.
1165 Wed Sep 6 15:02:55 1995 Ian Lance Taylor <ian@cygnus.com>
1167 * Makefile.in (*.o): Remove incorrect dependencies on
1168 $(BFDDIR)/hosts/std-host.h.
1170 * Makefile.in (INSTALL_DATA): Add -m 644.
1171 (INSTALL_XFORM1): Likewise.
1172 (CC_FOR_BUILD): Set to @CC_FOR_BUILD@ rather than $(CC).
1173 (mostlyclean): Remove config.log.
1174 (distclean): Remove config.cache.
1176 * configure.in: Call BFD_CC_FOR_BUILD and BFD_BINARY_FOPEN.
1177 * configure: Rebuild.
1179 Tue Sep 5 20:22:42 1995 Ian Lance Taylor <ian@cygnus.com>
1181 * configure.in: Rewrite to use autoconf.
1182 * aclocal.m4: New file.
1183 * configure: New file, built by autoconf.
1184 * acconfig.h: New file.
1185 * config.h.in: New file, built by autoheader.
1186 * Makefile.in: Various changes for new configure script. Also:
1187 (PROGS): Remove $(SYSINFO_PROG).
1188 (ALL_CFLAGS): Remove $(TDEFINES).
1189 (version.o): Use $(ALL_CFLAGS).
1190 (cplus-dem.o, dlltool.o, nlmconv.o): Likewise.
1191 (sysdump.o): Depend upon bucomm.h and config.h.
1192 (srconv.o, arsup.o, strings.o): Depend upon config.h.
1193 (filemode.o): Don't depend upon ../bfd/sysdep.h.
1194 (bucomm.o): Depend upon config.h, not ../bfd/sysdep.h.
1195 (size.o, objdump.o, nm.o, ar.o, objcopy.o): Likewise.
1196 (nlmheader.o, nlmconv.o): Likewise.
1197 (distclean): Don't remove sysdep.h.
1198 * bucomm.h: Include "ansidecl.h", <stdio.h>, and "config.h".
1199 Include "fopen-same.h" or "fopen-bin.h", based on
1200 USE_BINARY_FOPEN. Include <errno.h>, and declare errno if it is
1201 not a macro. Include <unistd.h>, <string.h>, <strings.h>,
1202 <stdlib.h>, and <fcntl.h> if they are present. Declare strchr,
1203 strrchr, and strstr if no string header file exists. Include
1204 <sys/file.h> if it exists and <fcntl.h> does not. Define
1205 O_RDONLY and O_RDWR if necessary.
1206 * ar.c: Don't include "sysdep.h". Do include <sys/types.h> and
1207 <sys/stat.h>. Use HAVE_GOOD_UTIME_H rather than POSIX_UTIME. Use
1208 HAVE_UTIMES rather than !USE_UTIME. Don't include <errno.h>, and
1209 don't declare errno.
1210 * arsup.c: Don't include <sysdep.h>.
1211 * bucomm.c: Don't include "sysdep.h". Include <stdio.h>,
1212 <sys/types.h>, and <sys/stat.h>. Include <time.h> if it defines
1213 time_t. Define time_t if necessary.
1214 * coffdump.c: Don't include "sysdep.h".
1215 * coffgrok.c, filemode.c, nlmconv.c, size.c: Likewise.
1216 * srconv.c, strings.c: Likewise.
1217 * nm.c: Don't include "sysdep.h". Don't try to define HAVE_SBRK.
1218 * objcopy.c: Don't include "sysdep.h". Include <sys/types.h> and
1220 (simple_copy): Use creat rather than assuming that O_CREAT is
1222 * objdump.c: Don't include "sysdep.h". Use
1223 NEED_DECLARATION_PRINTF rather than !FPRINTF_ALREADY_DECLARED.
1224 * sysdump.c: Include "bfd.h" and "bucomm.h". Don't include
1225 "sysdep.h" or <stdlib.h>.
1226 (dump_symbol_info): Rename from symbol_info. Change all callers.
1228 Mon Sep 4 14:30:00 1995 Ian Lance Taylor <ian@cygnus.com>
1230 * configure.in (host_makefile_frag): Don't set. Substitute for
1231 @CC@, @CFLAGS@, @HDEFINES@ and @LDFLAGS@ in Makefile.
1232 * Makefile.in (AR_FLAGS): Set to rc rather than qv.
1233 (CC): Define as @CC@.
1234 (CFLAGS): Set to @CFLAGS@.
1235 (LDFLAGS): Define as @LDFLAGS@.
1236 (ALL_CFLAGS): Use @HDEFINES@ rather than $(HDEFINES).
1238 * configure.in: Don't bother to call config.bfd for each target.
1239 Just call it for the default target, and use the shell variable to
1240 decide whether underscores are used.
1242 Thu Aug 31 19:21:48 1995 Jason Molenda (crash@phydeaux.cygnus.com)
1244 * configure.in: match i[3-6]86-*-win32, not just i386-*-win32.
1246 Thu Aug 31 16:30:22 1995 steve chamberlain <sac@slash.cygnus.com>
1248 * dlltool.c (add_indirect): New.
1250 (gen_exp_file): Timestamp should be 0. Insert prefix when
1251 needed. New code for indirection.
1252 (gen_lib_file): Timestamp should be 0. Insert prefix
1254 (usage): Document --add-indirect.
1255 (main): Cope with new option.
1257 * objdump.c (dump_private_headers): New.
1258 (usage): Document new option.
1259 (long_option): Add private-headers.
1260 (dump_bfd_private_header): New.
1261 (main): Cope with new option.
1263 Thu Aug 31 04:09:16 1995 Doug Evans <dje@canuck.cygnus.com>
1265 * dlltool.c (run): Add missing 3rd arg to waitpid.
1267 Wed Aug 30 11:02:11 1995 steve chamberlain <sac@slash.cygnus.com>
1269 * Makefile.in (TOOL_PROGS): Include dlltool if needed.
1271 Tue Aug 29 13:25:21 1995 steve chamberlain <sac@slash.cygnus.com>
1273 * dlltool.c (rva): Deleted.
1274 (rvaafter, rva_before): Use new assembler pseudo.
1275 (flush_page, gen_exp_file, gen_lib_file): Use new way of RVAing.
1276 (gen_exp_file): Don't generate .edata if no need.
1277 (gen_lib_file): Don't make timestamp.
1278 Put _iname in idata$7.
1279 (workout_prefix): Fix memory initialization bug.
1280 (usage): Tidy up, delete many single char options.
1281 (main): rva option is gone.
1283 Mon Aug 21 18:41:28 1995 steve chamberlain <sac@slash.cygnus.com>
1285 * dlltool.c (options): image-base is a synonym for rva.
1286 (gen_lib_file): Put dll name into ibase$7.
1288 Sun Aug 20 09:59:00 1995 steve chamberlain <sac@slash.cygnus.com>
1290 Modified to generate archives and objects rather than .s files.
1291 * dlltool.c (run) New function.
1292 (gen_exp_file, gen_lib_file): Use run.
1293 (workout_prefix): New.
1294 (usage): Document new options.
1295 (main): Parse new options.
1297 Wed Aug 16 16:26:52 1995 steve chamberlain <sac@slash.cygnus.com>
1299 * dlltool.c (gen_exp_file): Fix RVA handling.
1300 (rva_s, rva_n): Delete.
1302 Fri Aug 11 18:27:18 1995 Ian Lance Taylor <ian@cygnus.com>
1304 * nm.c (main): Ignore -e.
1306 Thu Aug 10 17:35:00 1995 Ken Raeburn <raeburn@cygnus.com>
1308 * Makefile.in (config.texi): New target. Write out a setting for
1309 texinfo variable VERSION.
1310 (binutils.dvi, binutils.info): Depend on it.
1311 * binutils.texi: Include it, and reference @value{VERSION} instead
1312 of explicitly specifying 2.2(!).
1314 Thu Aug 10 16:07:53 1995 Ian Lance Taylor <ian@cygnus.com>
1316 * coffgrok.c (do_type): Handle array dimensions the same way gdb
1319 Tue Aug 8 17:10:42 1995 steve chamberlain <sac@slash.cygnus.com>
1321 * dlltool.c (mtable): New fields.
1322 (ASM_RVA_BEFORE, ASM_RVA_AFTER): New.
1323 (flush_page): Use new macros.
1325 Sat Aug 5 00:16:37 1995 Jeff Law (law@snake.cs.utah.edu)
1327 * objcopy.c (mark_symbols_used_in_relocations): Handle sections
1328 with no relocations.
1329 * coffgrok.c (do_sections_p1): Likewise.
1331 Mon Jul 31 12:51:06 1995 Ian Lance Taylor <ian@cygnus.com>
1333 * strings.c (print_strings): For compatibility with existing
1334 strings programs, print strings which are not terminated with a
1335 null byte or a newline.
1336 * binutils.texi, strings.1: Update documentation accordingly.
1338 * ar.c (replace_members): For compatibility with existing ar
1339 programs, permit users to add the same file multiple times.
1341 Tue Jul 25 11:21:53 1995 Ian Lance Taylor <ian@cygnus.com>
1343 * strings.c (DATA_FLAGS): Remove SEC_DATA.
1344 (main): If no file names are given, scan standard input.
1345 * binutils.texi, strings.1: strings now scans non-data sections by
1348 Mon Jul 24 13:52:28 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1350 * srconv.c (wr_hd): Set afl field to 4 for bfd_arch_sh.
1351 (writeINT): When size == -2, use 2 bytes for the h8300 and 4 bytes
1354 * sysdump.c (fillup): Return size - 1, the last byte is a checksum
1355 and shouldn't be counted.
1356 * sysroff.info (hd): Changed segment identifier from a byte to a 1
1357 bit field. The sysroff 2.0-01 specification seems to be in error
1358 here. Reduce width of following "spare" field from 4 to 3 bits.
1359 (rl): Changed order and width of first 4 bitfields to correspond
1360 to sysroff specification.
1361 (dln_head, dln_inside, dln_tail): Removed.
1363 Tue Jul 18 23:00:03 1995 Fred Fish <fnf@cygnus.com>
1365 * nm.c (sort_symbols_by_size): Enclose expression being casted
1366 in parens so result is casted, not just first operand. Can't
1367 do pointer arithmetic on void* pointers.
1369 Fri Jul 14 13:42:42 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1371 * sysdump.c (dh): Changed format of output to be 16 hex digits
1372 followed by 16 ascii characters, similar to Emacs' hexl-mode,
1373 to make it easier to read.
1374 (xcalloc): fix typo.
1376 Thu Jul 13 15:27:44 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1378 * srconv.c (wr_tr): Write out handcrafted tr block.
1379 (walk_tree_symbol): Use evallen and evalue instead of
1380 vallen & value because of corresponding changes in
1383 * sysdump.c (sysroff_swap_tr_in, sysroff_print_tr_out): New
1386 * sysroff.info (tr): the tr block is a special case --- a block
1387 without contents --- which can't be handled by generated code.
1388 (den, dpp): only first byte is present for DENend, DPPend.
1389 (dsy): describe a conditional portion of block, rename some fields.
1390 (dps): describe a conditional portion of block.
1393 * sysinfo.y (yyerror): write error message to standard error.
1395 Thu Jul 13 10:43:59 1995 Ian Lance Taylor <ian@cygnus.com>
1397 * Makefile.in (DISTSTUFF): Add arparse.h and sysinfo.h.
1398 (mostlyclean): Remove y.output.
1399 (clean): Remove sysroff, sysroff.c, sysroff.h, and sysinfo.
1401 * nlmconv.c (powerpc_mangle_relocs): Cast memset arg to size_t.
1402 * objcopy.c (copy_object): Likewise.
1404 * nm.c (HAVE_SBRK): Define execpt on amigados and WINDOWS_NT.
1405 (struct size_sym): Define.
1406 (show_stats): New static variable.
1407 (long_options): Add undocumented option "stats".
1408 (main): Print memory stats if requested.
1409 (sort_bfd, sort_dynamic, sort_x, sort_y): New static variables.
1410 (numeric_forward): Use minisymbols rather than asymbols.
1411 (non_numeric_forward): Likewise.
1412 (size_forward1): Rename from size_forward. Use minisymbols.
1413 (size_forward2): New static function.
1414 (sort_symbols_by_size): Take new arguments dynamic, size, and
1415 symsizep. Use minisymbols. Don't store the size back in the
1416 symbol; store in a newly allocate struct size_sym array.
1417 (display_rel_file): Read minisymbols rather than asymbols. Set
1418 sort_* variables. Call print_size_symbols if sorting by size.
1419 (filter_symbols): Take new arguments dynamic and size. Use
1421 (print_symbols): Likewise. Call print_symbol for actual printing.
1422 (print_size_symbols): New static function.
1423 (print_symbol): New static function.
1425 Wed Jul 12 10:43:05 1995 Ian Lance Taylor <ian@cygnus.com>
1427 * objdump.c (dump_section_stabs): Only print each stabs section
1429 (compare_relocs): Make it clear to gcc that this always returns a
1432 Wed Jul 12 10:40:23 1995 H.J. Lu <hjl@nynexst.com>
1434 * objcopy.c (simple_copy): Preserve errno on failure.
1435 (smart_rename): Print error mesage if simple_copy fails.
1437 Tue Jul 11 13:10:52 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1439 * sysdump.c: re-indented file.
1440 (module): read blocks sequentially instead of trying to parse
1441 them, as that would require changing the parser recognize the
1442 difference between a DPSstart and DPSend block.
1443 (getone): Add break's between switch blocks as appropriate.
1444 (object_body_list): parse blocks according to sysroff spec.
1446 Mon Jul 10 12:37:25 1995 J.T. Conklin <jtc@poseidon.cygnus.com>
1448 * sysroff.info: re-indented file, prior formatting was confusing
1449 because it was indentation did not reflect nesting of conditional
1450 records. Change "space size within segment" record in hd record
1453 * sysinfo.y (cond_it_field): Use xcalloc instead of calloc.
1455 * srconv.c (wr_cs): Reformatted cs header array, tag each byte
1456 with a comment describing the field.
1457 (wr_unit_info): Use SEEK_SET macro instead of constant 0.
1458 (main): Use FOPEN_WB macro instead of literal "wb".
1459 * sysroff.info: Remove fdl (dfl) field from cs block. Compare
1460 ptr->type with ED_TYPE_CONST instead of constant 2 in ed block.
1462 Tue Jul 4 14:48:42 1995 Ian Lance Taylor <ian@cygnus.com>
1464 * nm.c (size_forward): Check yf against yn, not xn.
1466 * objcopy.c (copy_archive): Record all output BFD's, and close
1467 them before unlinking them and removing the temporary directory,
1468 to avoid NFS problems.
1470 * ar.c (replace_members): In verbose messages, use 'r' when
1471 replacing a member, and 'a' when adding one.
1473 * ar.c (ar_truncate): New static variable.
1474 (normalize): Change return type to const char *. Add abfd
1475 argument. Change all callers. If ar_truncate, chop the filename
1476 to abfd->ar_max_namelen.
1477 (main): For the 'f' modifier, set ar_truncate to true. Don't
1478 change quick_append to replace if ar_truncate is true.
1479 (do_quick_append): If ar_truncate, set BFD_TRADITIONAL_FORMAT.
1480 (write_archive): Likewise.
1481 * binutils.texi, ar.1: Document 'f' modifier.
1483 * objcopy.c (enum strip_action): Define strip_unneeded.
1484 (OPTION_STRIP_UNNEEDED): Define.
1485 (strip_options): Add "strip-unneeded".
1486 (copy_options): Likewise.
1487 (copy_usage): Mention --strip-unneeded.
1488 (strip_usage): Likewise.
1489 (is_strip_section): Strip debugging sections if strip_unneeded.
1490 (filter_symbols): If strip_unneeded, only keep BSF_KEEP symbols.
1491 (copy_object): If strip_all, discard symbols without checking
1493 (copy_object): Call filter_symbols if strip_unneeded.
1494 (setup_section): Strip debugging sections if strip_unneeded.
1495 (copy_section): Likewise.
1496 (strip_main): Handle OPTION_STRIP_UNNEEDED.
1497 (copy_main): Likewise.
1498 * binutils.texi, objcopy.1, strip.1: Document --strip-unneeded.
1500 Mon Jul 3 14:16:47 1995 Steve Chamberlain <sac@slash.cygnus.com>
1502 * configure.in (i386-*-win32): New configuration.
1503 * dlltool.c (killat, xlate, usage, long_options, main):
1504 Understand and cope with -k option.
1506 Sat Jul 1 12:25:15 1995 Fred Fish <fnf@cygnus.com>
1508 * ar.c: (extract_file): Change "#if POSIX_UTIME" to
1509 "#ifdef POSIX_UTIME" to match other tests of POSIX_UTIME
1510 and avoid lossage when POSIX_UTIME is not defined at all.
1512 Wed Jun 28 17:51:24 1995 Steve Chamberlain <sac@slash.cygnus.com>
1514 * ar.c: (print_contents.c, extract_file, do_quick_append):
1515 Malloc buffers rather than allocate on stack (so it works
1517 * deflex.l: Names can have an @ in them.
1518 * dlltool.c: Loads of stuff. Can now generate .imp files which
1521 Thu Jun 22 19:10:50 1995 Stan Shebs <shebs@andros.cygnus.com>
1523 * mpw-make.in (demangle.c.o): Remove.
1524 (arparse.h): Depend on arparse.c instead of arparse.y.
1526 Wed Jun 21 17:32:45 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1528 * Makefile.in (DISTSTUFF): Don't include info here.
1529 (diststuff): Include it here.
1530 (realclean): Remove *.info.
1532 * objdump.c (compare_relocs): If relocation entries have the same
1533 address, keep them in file order.
1535 Mon Jun 19 09:06:49 1995 Steve Chamberlain <sac@slash.cygnus.com>
1537 * dlltool.c: Change names of generated files. .*.s-> -*.s
1539 * objdump.c (dump_section_stabs): Check for names
1540 which are supersets of selected names.
1542 Wed Jun 14 19:43:52 1995 Doug Evans <dje@canuck.cygnus.com>
1544 * dlltool.c (mtable, ARM jump): Must redirect via pc offsetable ptr.
1546 Wed Jun 14 13:27:22 1995 Steve Chamberlain <sac@slash.cygnus.com>
1548 * deflex.l, defparse.y, dlltool.c: New files.
1549 * Makefile.in, configure.in: Support for them.
1551 Mon Jun 12 11:27:54 1995 Steve Chamberlain <sac@slash.cygnus.com>
1553 * sysdump.c: Include sysdep.h
1554 (main): Open input with FOPEN_RB.
1556 Fri Jun 9 17:26:11 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1558 * objdump.c (wide_output): New flag variable.
1559 (usage): Print new -w, --wide options.
1560 (long_options): Add --wide support.
1561 (dump_section_header): If --wide, don't print a newline between
1562 the section's first line and the flags.
1563 (objdump_print_address): Use unsigned comparisons for the binary
1565 (disassemble_data): If --wide, don't put a \n between the
1566 disassembly output and relocation information.
1567 (main): Support -w option being the same as --wide.
1569 Thu Jun 1 17:09:27 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1571 Sat May 6 08:52:24 1995 H.J. Lu (hjl@nynexst.com)
1573 * objcopy.c (smart_rename): make it smarter, clean up
1576 Tue May 30 14:24:15 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1578 * Makefile.in: Delete lines with lots of #### because four or more
1579 indicate a point for makefile fragment substitution.
1581 Tue May 9 17:17:05 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1583 * configure.in: Don't build nlmconv on PowerPC eabi any more, it
1586 Thu Apr 27 20:21:24 1995 Doug Evans <dje@canuck.cygnus.com>
1588 * Makefile.in (EXPECT): Define.
1589 (RUNTEST): Use one in source tree if present.
1590 (check): Set `rootme' for $(EXPECT).
1592 Wed Apr 26 18:26:21 1995 Steve Chamberlain <sac@slash.cygnus.com>
1594 * srconv.c (main): Add support for -n option which disables
1595 prescan of common symbols.
1596 (wr_ob): If reading past the end of a section, fill with zeros.
1598 Tue Apr 25 19:14:37 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1600 * objdump.c (dump_section_header): Display load address after
1601 virtual memory (run-time) address.
1603 Wed Apr 19 09:44:06 1995 Jason Merrill <jason@phydeaux.cygnus.com>
1605 * Makefile.in (cplus-dem.o): Pass -DVERSION='"$(VERSION)"' to the
1607 (DEMANGLER_PROG): No longer uses version.o.
1609 Mon Apr 10 13:29:49 1995 Stan Shebs <shebs@andros.cygnus.com>
1611 Merge in support for Mac MPW as a host.
1612 (Old change descriptions retained for informational value.)
1614 * mpw-config.in (TDEFINES): Define as empty in makefile frag.
1616 * mpw-config.in: Create mk.tmp, define ARCHDEFS in it.
1618 * mpw-config.in: New file, MPW configure fragment for binutils.
1619 * mpw-make.in (install-only): New target.
1620 (install): Also depend on install-only.
1622 * mpw-make.in (cplusfilt): Renamed from c++filt.
1623 (INCLUDES): Add more paths.
1625 * mpw-make.in: New file, MPW makefile fragment for binutils.
1626 (Normally automatically generated from Makefile.in.)
1628 Mon Mar 27 11:52:57 1995 Ian Lance Taylor <ian@cygnus.com>
1630 * ar.c (write_archive): Call make_tempname to get output file
1631 name, rather than using a fixed name based on the input file.
1633 * objcopy.c (make_tempname): Copy from here...
1634 * bucomm.c (make_tempname): ...to here, and make global.
1635 * bucomm.h (make_tempname): Declare.
1637 Fri Mar 24 11:47:42 1995 Ian Lance Taylor <ian@cygnus.com>
1639 * strings.c: Include "bfd.h" before other headers. Include
1641 * bucomm.c (print_arelt_descr): Cast st_uid and st_gid to long,
1642 and print them with %ld.
1644 Fri Mar 10 13:09:42 1995 Ian Lance Taylor <ian@cygnus.com>
1646 * objcopy.c (strip_options): Add --keep-symbol.
1647 (copy_options): Likewise.
1648 (copy_usage): Mention --keep-symbol and -K.
1649 (strip_usage): Likewise.
1650 (keep_symbols): New static variable.
1651 (is_strip_symbol): Adjust the return value according to
1653 (strip_main): Handle -K. For -N, check that -K was not given.
1654 (copy_main): Likewise.
1655 * binutils.texi, objcopy.1, strip.1: Document -K.
1657 Mon Mar 6 13:33:47 1995 Stan Shebs <shebs@andros.cygnus.com>
1659 * objcopy.c (copy_archive): Check result of mkdir.
1660 (copy_main): Cast an xmalloc result.
1662 * objdump.c (usage): Break long format string into shorter ones.
1664 Mon Mar 6 13:46:12 1995 Ian Lance Taylor <ian@cygnus.com>
1666 * bucomm.c (list_supported_targets): New function.
1667 * bucomm.h (list_supported_targets): Declare.
1668 * ar.c (usage): Call list_supported_targets.
1669 * nm.c (usage): Likewise.
1670 * objcopy.c (copy_usage, strip_usage): Likewise.
1671 * objdump.c (usage): Likewise.
1672 * size.c (usage): Likewise.
1673 * strings.c (usage): Likewise.
1675 Tue Feb 28 15:13:58 1995 Ian Lance Taylor <ian@cygnus.com>
1677 * bucomm.c (print_arelt_descr): Cast st_size to long before
1678 passing it to fprintf.
1680 Fri Feb 17 13:36:45 1995 Ian Lance Taylor <ian@cygnus.com>
1682 * objcopy.c (struct section_list): Add fields remove, set_flags,
1683 and flags. Change adjust from boolean to enum.
1684 (remove_sections): Remove static variable.
1685 (sections_removed): New static variable.
1686 (copy_options): Add --set-section-flags.
1687 (copy_usage): Mention --set-section-flags.
1688 (parse_flags): New static function.
1689 (find_section_list): New static function.
1690 (is_strip_symbol): Change return type from int to boolean.
1691 (is_strip_section): New static function.
1692 (filter_symbols): Call is_strip_section.
1693 (copy_object): When adding sections, check for specified flags or
1694 VMA. Call filter_symbols if any sections are being removed.
1695 (setup_section): Use find_section_list function rather than
1696 looking through remove_sections and adjust_sections. Handle
1697 --set-section-flags.
1698 (copy_section): Use find_section_list rather than looking through
1700 (strip_main): Use find_section_list instead of adding items to
1702 (copy_main): Use find_section_list instead of adding items to
1703 sections_removed and adjust_sections. Handle --set-section-flags.
1704 * binutils.texi, objcopy.1: Document --set-section-flags.
1706 Tue Feb 14 18:03:03 1995 Ian Lance Taylor <ian@cygnus.com>
1708 * objdump.c (with_source_code): New global variable.
1709 (usage): Mention -S/--source.
1710 (long_options): Add --source.
1711 (prev_functionname, prev_line): New static variables.
1712 (struct print_file_list): Define.
1713 (print_files): New static variable.
1714 (skip_to_line, show_line): New static functions.
1715 (disassemble_data): Call show_line to handle -l and -S.
1717 * binutils.texi, objdump.1: Document -S/--source.
1719 Thu Feb 9 16:11:53 1995 Ian Lance Taylor <ian@cygnus.com>
1721 * objcopy.c (copy_usage): Rename parameter to avoid shadowing.
1722 (strip_usage): Likewise.
1724 * objcopy.c (struct section_add): Define.
1725 (add_sections): New static variable.
1726 (copy_options): Accept --add-section.
1727 (copy_usage): Mention --add-section.
1728 (copy_object): Add sections from the add_sections list.
1729 (copy_main): Handle --add-section.
1730 * binutils.texi, objcopy.1: Document --add-section.
1732 Wed Feb 1 15:04:57 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1734 * objdump.c (disassemble_data): Pass section offset, not absolute
1735 address, to bfd_find_nearest_line.
1737 * nlmconv.c (powerpc_mangle_relocs): Don't use const with
1740 Thu Jan 26 18:50:06 1995 Ian Lance Taylor <ian@cygnus.com>
1742 * objdump.c (compare_symbols): Use bfd_asymbol_value (VAR) rather
1744 (objdump_print_address): Likewise.
1745 (disassemble_data): Don't change the symbol values. It can
1746 confuse bfd_canonicalize_reloc.
1748 Thu Jan 26 12:03:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1750 * configure.in: Add support for powerpc-*-ebai.
1752 Wed Jan 18 10:02:12 1995 Steve Chamberlain <sac@splat>
1754 * coffdump.c: Include sysdep.h.
1755 (dump_coff_type): Handle coff_secdef_type.
1756 * coffgrok.c : Include sysdep.h.
1757 * srconv.c: Include libiberty.h
1758 (absolute_p, dty_start, dty_end, dump_tree_structure): Remove.
1760 Wed Jan 18 12:24:14 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1762 * coffdump.c (dump_coff_scope): Cast pointer to unsigned long for
1764 * coffgrok.c: Include bucomm.h. Don't declare xmalloc.
1765 (push_scope): Declare type of parameter link.
1766 * size.c: Include libiberty.h.
1767 * srconv.c: Include bucomm.h.
1768 (find_base): Declare at top of file.
1769 (wr_hd): Add default case to architecture switch.
1770 (wr_dps_start): Declare type of parameter nest.
1771 (wr_du): Comment out variables used only in commented out blocks.
1772 (wr_dus): Remove unused variable i.
1773 (wr_sc): Remove unused variables myinfo, low, and high.
1774 * strings.c: Include libiberty.h.
1775 * sysdump.c: Include <ctype.h>.
1777 Tue Dec 20 19:13:44 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1779 * ar.c (main): Ignore 'f' modifier used on HP/UX 9.
1781 Thu Dec 15 17:34:12 1994 Stan Shebs <shebs@andros.cygnus.com>
1783 * ar.c, nm.c, objcopy.c, objdump.c: Include progress.h.
1784 * ar.c, nm.c, objcopy.c, objdump.c (main): Add START_PROGRESS
1786 * ar.c (map_over_members, open_inarch): Call PROGRESS.
1787 * nm.c (main, display_archive, filter_symbols, print_symbols):
1790 * objcopy.c (copy_usage): Break up long usage string.
1792 Wed Dec 14 15:51:56 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1794 * objcopy.c (copy_object): Don't bother setting status after
1795 nonfatal() "call", because it won't return.
1797 Fri Dec 9 00:22:54 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1799 * nlmconv.c (powerpc_mangle_relocs): Don't switch a reloc to use
1800 the section symbol if the symbol is undefined.
1802 Thu Dec 8 14:45:50 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1804 * objcopy.c (add_strip_symbol): Cast return value of xmalloc.
1806 Wed Nov 30 11:05:43 1994 Ian Lance Taylor <ian@rtl.cygnus.com>
1808 * ar.c (replace_members): Pass current->filename to normalize when
1809 checking for duplicates, because the filename of a newly added
1810 file will not have been normalized yet.
1812 Thu Nov 17 15:00:13 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1814 * ar.c (main): Don't call do_quick_append if any of the archive
1815 names are longer than 14 characters.
1817 * objcopy.c (main): Fix is_strip test. From
1818 pirker@eiunix.tuwien.ac.at (Martin Pirker).
1820 Thu Nov 17 15:37:19 1994 Mark W. Eichin <eichin@cygnus.com>
1822 * objcopy.c (add_strip_symbol): New function, adds a name to an
1823 explicit list of symbols to strip.
1824 (is_strip_symbol): New function, reports whether the name argument
1825 is in the explicit list.
1826 (filter_symbols): Check against is_strip_symbol above all.
1827 (strip_main): Recognize -N option. If used, don't default to
1829 (copy_main): Recognize -N option.
1830 (strip_usage): Document -N and --strip-symbol options.
1831 (copy_usage): Ditto.
1832 * objcopy.1, strip.1, binutils.texi: Document -N and
1833 --strip-symbol options.
1835 Tue Nov 8 13:12:54 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1837 * objdump.c (display_target_list, display_info_table): Pass an
1838 array to tmparg, rather than NULL, since some systems can't handle
1841 * objcopy.c (copy_archive): Keep a list of the names of the
1842 temporary files we created. Close each input BFD after we open
1845 Mon Nov 7 15:48:39 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1847 * Makefile.in (VERSION): Bump to 2.5.3.
1849 Thu Nov 3 19:04:34 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1851 * Makefile.in (install-info): Install info files from whatever
1852 directory they were found in.
1854 Patch from DJ Delorie:
1855 * configure.bat: do c++filt -> cxxfilt right
1857 * sysinfo.y: Include system header files early, so any potential
1858 declaration of abort() occurs before its use.
1860 * strings.c (strings_file): Try opening the file in binary mode
1863 Wed Nov 2 15:44:13 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1865 * ar.c (main): Treat ar qs like ar rs.
1867 Tue Oct 25 16:19:25 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1869 * objcopy.c (gap_fill): Explicitly initialize, for clarity.
1870 (pad_to_set, pad_to): New static variables.
1871 (copy_options): Accept --pad-to.
1872 (copy_usage): Mention --pad-to.
1873 (copy_object): Support --pad-to.
1874 (compare_section_vma): Sort non loadable sections to the front.
1875 Sort sections with the same VMA by size.
1876 (copy_main): Handle --pad-to.
1877 * binutils.texi, objcopy.1: Document --pad-to.
1879 Thu Oct 20 13:51:31 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1881 * objcopy.c (gap_fill_set, gap_fill): New static variables.
1882 (copy_options): Accept --gap-fill.
1883 (copy_usage): Mention --gap-fill.
1884 (copy_object): Support --gap-fill.
1885 (get_sections, compare_section_vma): New static functions.
1886 (copy_main): Handle --gap-fill.
1887 * binutils.texi, objcopy.1: Document --gap-fill.
1889 Wed Oct 19 14:09:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1891 * Makefile.in (check): Add a dummy else clause to the if
1894 * objcopy.c (copy_object): Revert yesterday's change.
1895 * binutils.texi, objcopy.1: Remove special mention of --set-start
1896 and `binary' output format.
1898 Tue Oct 18 11:12:01 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1900 * objcopy.c (copy_object): If the output file format is `binary',
1901 and the start address was not set using --set-start, default the
1902 start address to zero. This hack is because the `binary' output
1903 file format uses the start address to set the virtual address of
1904 the first byte in the file.
1905 * binutils.texi, objcopy.1: Add some notes on generating S-records
1908 * nm.c (print_symdef_entry): Call print_symname to print the
1909 symbol name, so that --demangle works.
1911 * Makefile.in (mostlyclean): Remove tmpdir.
1913 * objcopy.c (struct section_list): Add fields used, adjust, val.
1914 (adjust_start, set_start_set, set_start): New static variables.
1915 (adjust_section_vma, adjust_sections): New static variables.
1916 (copy_options): Add --adjust-start, --adjust-vma,
1917 --adjust-section-vma, --adjust-warnings, --no-adjust-warnings,
1919 (parse_vma): New static function.
1920 (copy_usage): Mention new options.
1921 (copy_object): Handle --set-start and --adjust-start.
1922 (setup_section): Correct type of last argument to PTR. Set used
1923 field if section is removed. Handle --adjust-vma and
1924 --adjust-section-vma.
1925 (copy_section): Correct type of last argument to PTR.
1926 (mark_symbols_used_in_relocations): Likewise.
1927 (strip_main): Clear used field when handling -R.
1928 (copy_main): Handle new options.
1929 * binutils.texi (objcopy): Document new options.
1930 * objcopy.1: Document new options.
1932 Fri Oct 14 14:38:13 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1934 * configure.in (configdirs): Remove definition--testsuite is no
1936 * Makefile.in (testsuite): Remove target.
1937 (site.exp): New target.
1939 (clean, distclean): Don't recur into testsuite directory.
1941 Thu Oct 13 19:24:09 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1943 * Makefile.in (VERSION): Updated to 2.5.
1944 * Version 2.5 released.
1946 Tue Oct 11 15:26:42 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1948 * Makefile.in (sysdump.o): Depends upon sysroff.c.
1950 Mon Oct 10 13:50:30 1994 J.T. Conklin (jtc@rtl.cygnus.com)
1952 * nlmconv.c (link_inputs): Pass -Ur flag to ld so that the
1953 ctor/dtor tables needed by C++ programs are built.
1955 Sun Oct 9 18:04:00 1994 Jim Wilson (wilson@sphagnum.cygnus.com)
1957 * Makefile.in (srconv.o): Add dependence on sysroff.c.
1959 Tue Oct 4 12:19:51 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1961 * configure.in: Use ${config_shell} when running config.bfd.
1963 * Makefile.in (sysroff.h): Split target away from sysroff.c.
1964 (srconv.o, sysdump.o): New targets.
1965 (srconv, sysdump): Don't depend upon sysroff.c.
1967 Wed Sep 28 13:04:34 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1969 * Makefile.in (arparse.c): Don't ignore errors from mv.
1970 (sysinfo.c): Likewise. Also, depend upon arparse.c, to prevent a
1971 parallel make from trying to build both arparse.c and sysinfo.c
1973 (nlmheader.c): Similar change.
1974 (arparse.h): Separate target from arparse.c, so that a parallel
1975 make does not try to build both at once. Depend upon arparse.c.
1976 (sysinfo.h): Similar change.
1978 * objdump.c (disassemble_data): Pass the reloc buffer to free, not
1979 the pointer used to loop over the relocs.
1981 Sat Sep 24 16:16:57 1994 Stan Shebs (shebs@andros.cygnus.com)
1983 * objdump.c (disassemble_data): Cast result of xmalloc.
1985 Wed Sep 21 19:30:35 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1987 * objdump.c (sorted_syms, sorted_symcount): New global variables.
1988 (objdump_print_address): Use sorted_syms and sorted_symcount
1989 instead of syms and symcount.
1990 (disassemble_data): Don't bother to get the relocs before looping
1991 over the sections. Before filtering and sorting the symbol table,
1992 copy it into sorted_syms.
1994 Fri Sep 16 11:27:39 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1996 * objdump.c (struct objdump_disasm_info): Add field require_sec.
1997 (objdump_print_address): If aux->require_sec, require that the
1998 symbol be in aux->sec even if HAS_RELOC is not set. If we can't
1999 find a smaller symbol in the right section, look for a larger one.
2000 (disassemble_data): Set aux.require_sec around the
2001 objdump_print_address call for the instruction address.
2003 Thu Sep 15 21:43:17 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2005 * ar.c: Call xexit rather than exit.
2006 (output_filename, output_file, output_bfd): New static variables.
2007 (remove_output): New static function.
2008 (main): Call xatexit (remove_output). Call xexit rather than
2010 (extract_file): Set output_filename and output_file while output
2012 (write_archive): Likewise, but use output_bfd, not output_file.
2013 * arsup.c: Include libiberty.h. Call xexit rather than exit.
2014 * bucomm.c: Likewise.
2016 * objdump.c (disassemble_all): New global variable.
2017 (usage): Document --disassemble-all.
2018 (long_options): Add disassemble-all as a synonym for -D.
2019 (compare_symbols): Make pointers const.
2020 (compare_relocs): New static function.
2021 (disassemble_data): Rename disassemble to disassemble_fn to avoid
2022 shadowing. If dump_reloc_info, print relocs along with
2023 disassembly. Skip sections which are not SEC_CODE unless
2024 disassemble_all or only is set.
2025 (display_bfd): Don't call dump_relocs if disassemble is set.
2026 (main): Accept and handle -D.
2027 * binutils.texi: Document -D/--disassemble-all.
2028 * objdump.1: Likewise.
2030 Wed Sep 14 12:19:07 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2032 * objdump.c (disassemble_data): Initialize prevline to 0. Make
2033 prev_function non const. Copy functionname into an malloc buffer
2034 when setting prev_function, instead of assuming that the string
2037 * nm.c: Include libiberty.h.
2038 (sort_by_size): New static variable.
2039 (long_options): Add --size-sort.
2040 (usage): Mention --size-sort.
2041 (numeric_forward): Make static. Change from void * to PTR.
2042 (numeric_reverse): Likewise.
2043 (non_numeric_forward, non_numeric_reverse): Likewise.
2044 (sorters): Change declaration from void * to PTR.
2045 (size_forward, sort_symbol_by_size): New static functions.
2046 (display_rel_file): Handle sort_by_size.
2047 (filter_symbols): If sort_by_size, discard absolute and undefined
2049 * binutils.texi (nm): Document --size-sort.
2050 * nm.1: Document --size-sort.
2052 Tue Sep 13 21:06:06 1994 Jeff Law (law@snake.cs.utah.edu)
2054 * objcopy.c (copy_main): Initialize input_filename and
2055 output_filename to NULL.
2057 Tue Sep 13 14:17:24 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2059 * Makefile.in (version.o): Depend upon Makefile, so that version.o
2060 gets rebuilt when make variable VERSION is changed.
2062 * objdump.c (dump_section_header): Print the SEC_NEVER_LOAD flag.
2064 Wed Aug 24 12:40:09 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2066 * configure.in: Change i[34]86 to i[345]86.
2068 Tue Aug 23 11:00:40 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2070 * ar.c (ranlib_touch): Don't update the archive map if there isn't
2073 Mon Aug 22 16:02:18 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2075 * ar.c: Include libiberty.h.
2076 (inarch): Remove variable.
2077 (map_over_members): Make static. Add arch argument, and use it
2078 instead of inarch. Change all callers.
2079 (main): Treat --version as -v. Accept -t argument. Accept any
2080 number of archive arguments. Catch and use open_inarch return
2081 value, rather than using inarch.
2082 (open_inarch): Return newly opened BFD, rather than using inarch.
2083 (do_quick_append): Make archive_filename const.
2084 (write_archive): Add iarch argument, and use it instead of inarch.
2086 (delete_members, move_members, replace_members): Likewise.
2087 (ranlib_only): Don't exit on success. Catch and use open_inarch
2089 (ranlib_touch): New function.
2090 * arsup.h (map_over_members): Don't declare.
2091 (ar_end, ar_extract): Declare.
2092 (open_inarch): Change return value in declaration to bfd *.
2093 * arsup.c (map_over_list): Make static. Always pass two arguments
2094 to function. Add arch argument, and use it instead of inarch.
2096 (ar_directory_doer): Make static. Add ignored second argument.
2098 (ar_directory): Use open_inarch return value rather than inarch.
2099 (ar_addlib_doer): Make static.
2100 (ar_addlib): Use open_inarch return value rather than inarch.
2101 (ar_extract): Remove unused local variable abfd.
2103 Thu Aug 11 14:55:57 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2105 Add support for removing named sections to objcopy and strip.
2106 * objcopy.c (struct section_list): Define.
2107 (remove_sections): New static variable.
2108 (strip_options, copy_options): Add remove-section.
2109 (copy_usage, strip_usage): Mention -R and --remove-section.
2110 (setup_section): If section is in remove_sections list, ignore it.
2111 (copy_section): Likewise.
2112 (strip_main, copy_main): Handle -R.
2113 * binutils.texi, objcopy.1, strip.1: Document new options.
2115 Wed Aug 10 10:19:55 1994 Stan Shebs (shebs@andros.cygnus.com)
2117 * nlmconv.c (powerpc_mangle_relocs): Rename symvalue to sym_value,
2118 so as not to conflict with the symvalue typedef in bfd.h.
2120 Mon Aug 1 13:19:09 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2122 * nlmheader.y: Per current NetWare docs, accept a revision number
2123 of 0 and treat a revision number greater than 26 as 0.
2125 Mon Jul 25 12:58:36 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2127 * objdump.c (objdump_print_address): Correct handling of end of
2128 symbols when looking for next symbol with a different value.
2130 Fri Jul 22 16:48:34 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2132 * nm.c (numeric_forward): Treat undefined symbols as "less than"
2133 defined symbols with zero values. If numeric values are equal, or
2134 both symbols are undefined, sort alphabetically. Don't assume
2135 that the difference of two bfd_vma values will truncate to "int"
2136 and still have the same sign.
2137 (numeric_reverse): Call numeric_forward and negate the result.
2138 (print_symbol_info_bsd): For undefined symbols, print leading
2139 spaces equivalent to the width of a printed bfd_vma, rather than
2140 assuming that 8 will look right.
2142 Fri Jul 22 10:36:50 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2144 * coffgrok.c (doit): Zero all fields of new structure.
2145 * srconv.c (sysroff_swap_*_out): Remove redundant trailing arg.
2146 * sysinfo.y: Generate sysroff_swap_*_out without requiring extra
2149 Fri Jul 22 10:09:53 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
2151 * nlmheader.y: Make "stack" and "stacksize" synonyms in the lexer
2152 rather than the parser.
2154 Thu Jul 21 10:25:09 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2156 * config/mh-alphaosf, config/mh-apollo68v, config/mh-delta88:
2159 Sat Jul 16 22:34:39 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2161 * objdump.c (slurp_dynamic_symtab): Try to get the dynamic symbols
2162 even if the bfd is not marked DYNAMIC. ELF executables are not
2163 marked DYNAMIC, but do have dynamic symbols.
2165 Fri Jul 15 01:41:35 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2167 * coffgrok.c (do_where): Make data with no type 'int'.
2168 (do_define): Keep info on source file of a symbol.
2169 * coffgrok.h (coff_symbol): New field.
2170 * srconv.c (PROGRAM_VERSION): Now 1.3
2171 (wr_rl): Use external ref number for symbol.
2172 (wr_dus): Only keep one source file per debug unit.
2173 (wr_dln): Always emit line numbers for first source file,
2174 (wr_globals): Emit globals in the du of their owning source file.
2176 Mon Jul 11 15:59:03 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
2178 * nlmheader.y: Null terminate var_hdr->threadName.
2180 Fri Jul 8 17:33:22 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2182 * Makefile.in (syslex.o, sysinfo.o): Permit C source files to be
2183 in $(srcdir), as they will be for FSF releases.
2185 Wed Jul 6 01:13:14 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2187 * nlmconv.c (setup_sections): Preserve existing section flags when
2188 copying in flags from a new section.
2190 Tue Jul 5 15:56:01 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2192 * objcopy.c: Include libiberty.h.
2193 (copy_file): If output_target is NULL, set it to the target of the
2196 Wed Jun 29 17:17:14 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
2198 * nlmconv.c (link_inputs): Fixed memory allocation bug.
2200 Thu Jun 23 12:52:46 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2202 * configure.in: Change --with-targets to --enable-targets.
2204 Tue Jun 21 12:53:21 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2206 * Makefile.in (sysinfo): Does not depend upon $(ADDL_LIBS).
2208 * nlmconv.c (powerpc_build_stubs): Don't generate the PowerPC
2209 NetWare custom header; no longer needed.
2210 (powerpc_mangle_relocs): Convert relocs against the uninitialized
2211 data section into relocs against the data section.
2213 * configure.in: Set nlmconv_defs to -DNLMCONV_cputype for all the
2214 netware targets. Write it into Makefile as NLMCONV_DEFS.
2215 * Makefile.in (nlmconv.o): Pass $(NLMCONV_DEFS) to $(CC).
2216 * nlmconv.c: Only compile code for specific CPU types if
2217 NLMCONV_cputype is defined.
2219 * nlmconv.c (main): Change uses of bfd_abs_section, etc., to use
2220 bfd_abs_section_ptr or bfd_is_abs_section, etc.
2221 (i386_mangle_relocs, alpha_mangle_relocs): Likewise.
2222 (powerpc_build_stubs): Likewise.
2223 * nm.c (filter_symbols, print_symbols): Likewise.
2224 * objcopy.c (filter_symbols): Likewise.
2225 (mark_symbols_used_in_relocations): Likewise.
2226 * objdump.c (remove_useless_symbols, dump_relocs): Likewise.
2227 * size.c (sysv_internal_printer): Likewise.
2229 Mon Jun 20 16:43:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2231 * Makefile.in (MANPAGES): Remove $(DEMANGLER_PROG).
2232 (install): Install it explicitly, from build dir, not srcdir.
2234 Mon Jun 20 16:29:54 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2236 * objdump.c: Don't include elf/internal.h.
2237 (bfd_elf_find_section): Don't declare.
2238 (read_section_stabs): No special handling for ELF. Always read
2241 Thu Jun 16 17:25:20 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2243 * configure.in: Set UNDERSCORE in Makefile based on result of
2244 invoking config.bfd with a second argument of ``_''.
2245 * Makefile.in (underscore.c): Depend upon Makefile. Don't try to
2246 run $(CC) and $(NM), just use $(UNDERSCORE). Create via temporary
2248 (demangle.o): Remove target.
2249 ($(NM_PROG)): Don't depend upon demangle.o, and don't link against
2250 demangle.o. It's in libiberty anyhow.
2251 (cplus-dem.o): Don't depend upon demangle.o.
2252 * binutils.texi: Mention -n and --no-strip-underscores arguments
2255 Wed Jun 15 12:10:31 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2257 * nm.c (long_options): Add --no-demangle to turn off --demangle,
2258 and --no-cplus for Linux compatibility.
2259 (usage): Mention --no-demangle.
2260 * binutils.texi: Document --no-demangle.
2262 Fri Jun 10 15:41:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2264 * nm.c: HOST_64_BIT was renamed to BFD_HOST_64_BIT.
2266 * objcopy.c (copy_archive): Make the temporary directory in the
2267 same directory as the output BFD, since we may not have write
2268 permission on the current directory. Set the permissions of the
2269 new directory to 0700, not 0777.
2271 Mon Jun 6 21:36:43 1994 D. V. Henkel-Wallace (gumby@cygnus.com)
2273 * configure.in: if this is an rs6000 (and we're not building for
2274 any other bfd targets) then build only nm (collect needs it on
2277 * Makefile.in: define TOOL_PROGS which the list of programes to
2278 install in $tooldir -- replaces a hard-coded list.
2280 Fri Jun 3 10:59:18 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2282 * objdump.c (display_target_list): Remove unused local ok.
2284 Thu May 26 18:05:52 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2286 * config/mh-alphaosf (CFLAGS): Don't specify both -g and -O;
2287 they're not compatible under native cc. Use -O1 instead.
2289 * Makefile.in (VERSION): Updated to cygnus-2.4.1.
2291 Changes from binutils-2.4 net release:
2293 * Makefile.in (MANPAGES): Use $(DEMANGLER_PROG).
2294 ($(DEMANGLER_PROG).1): Build from cxxfilt.man, using sed.
2295 * cxxfilt.man: Renamed from c++filt.1, replaced "c++filt" with
2296 magic token to be replaced by sed.
2298 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2300 * configure.bat: update for latest makefile.in
2302 Fri May 13 23:25:13 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2304 * bucomm.c: Check ANSI_PROTOTYPES rather than __STDC__.
2306 Tue May 10 18:22:06 1994 Jason Molenda (crash@sendai.cygnus.com)
2308 * objcopy.c (copy_section): Set section size correctly if using
2311 Sat May 7 16:49:36 1994 Steve Chamberlain (sac@cygnus.com)
2313 * Makefile.in: Add rule for sysinfo.h
2315 Fri May 6 12:18:33 1994 Steve Chamberlain (sac@cygnus.com)
2317 * Makefile.in (SRCONV_PROG): Define.
2318 (PROGS): Use $(SRCONV_PROG) too.
2320 Thu May 5 19:41:43 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2322 * Makefile.in (DISTSTUFF): Add sysinfo.c, syslex.c, in case
2323 someone configures with `targets=all'.
2324 (distclean): Remove y.*.
2325 (syslex.o): Depend on sysinfo.h.
2326 (sysinfo.c): Rename y.tab.h to sysinfo.h.
2327 (install-info): Don't try to install into $(infodir)/$(srcdir).
2328 * syslex.l: Include sysinfo.h, not y.tab.h.
2330 Thu May 5 11:50:55 1994 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2332 * syslex.l (yywrap): Define as function if not defined as a macro.
2334 * Makefile.in (objdump.o): Deleted special rule.
2335 * configure.in: Don't bother building ARCHDEFS variable for
2337 * objdump.c (ARCH_*): Deleted handling.
2338 (disassemble_data): Call `disassembler' from opcodes library.
2340 Thu May 5 13:28:42 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2342 * Makefile.in (install): Correct handling of $(tooldir) and
2343 $(bindir) being on different devices.
2345 Fri Apr 29 09:50:38 1994 Steve Chamberlain (sac@cygnus.com)
2347 * sysdump.c (h8300, sh): Add declarations.
2349 Wed Apr 27 11:25:18 1994 Steve Chamberlain (sac@cygnus.com)
2351 * Makefile.in (syslex, sysinfo): Use CC_FOR_BUILD.
2352 * coffdump.c, coffgroc.c, coffgrog.h, srconv.c, sysdump.c,
2353 sysroff.info: Major changes.
2355 Tue Apr 26 18:18:24 1994 Stan Shebs (shebs@andros.cygnus.com)
2357 * objdump.c (print_section_stabs): Indicate the stab header symbol
2358 more clearly, print numbers of unrecognized stab n_type values.
2360 Tue Apr 26 16:22:55 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2362 * nlmconv.c (copy_sections): Copy arelent pointers, not arelents.
2364 Mon Apr 25 16:14:32 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2366 * Makefile.in (distclean): Remove $(PROGS) and underscore.c.
2368 Fri Apr 22 11:14:19 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2370 * nlmconv.c (setup_sections): Remove special handling of .reginfo
2372 (copy_sections): Likewise.
2373 (alpha_mangle_relocs): Use bfd_ecoff_get_gp_value rather than the
2374 special ECOFF .reginfo section.
2376 * objcopy.c (copy_object): Call bfd_copy_private_bfd_data after
2377 copying everything else, to let it fiddle with the file in its
2380 * objdump.c: Include libiberty.h.
2381 (display_target_list): If a format fails, just go on to the next
2382 one. Check return value of bfd_set_format.
2383 (display_info_table): Likewise. Don't increment loop variable in
2384 for loop test, since that skips the first element.
2385 (display_target_tables): Rewrite loop for clarity. Ensure that it
2386 always prints at least one element.
2388 * nlmconv.c (main): Use CyGnUsEx rather than CyGnUsSeCs for
2389 sections header. Rename from cygnus_sections to cygnus_ext.
2391 Thu Apr 21 12:12:26 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2393 * objdump.c (_DUMMY_NAME_): Don't define.
2394 (display_target_list): Use tmpnam to get a file name rather than
2395 using _DUMMY_NAME_. Unlink it when done.
2396 (display_info_table): Likewise.
2398 * nlmconv.c (secsec): New static variable.
2399 (main): Create .nlmsections section in output BFD. Store
2400 information about it in sections header.
2401 (setup_sections): Allocate space in sections header.
2402 (copy_sections): Copy zero sized sections. Put information about
2403 each section in the sections header.
2405 Wed Apr 20 14:34:51 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2407 * nlmconv.c (powerpc_build_stubs): Take new outbfd argument.
2408 Change caller. Create custom header for new PowerPC NetWare
2411 * Makefile.in (nlmheader.o, nlmconv.o): Update dependencies.
2412 * nlmconv.c: Include bfd.h and libiberty.h with "", not <>.
2413 * nlmheader.y: Include bfd.h with "", not <>.
2415 Wed Apr 13 10:52:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2417 * objdump.c: Do an ifdef on __GO32__, not unix.
2419 Wed Apr 6 21:54:49 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2421 Added -D (--dynamic) option to nm and -T (--dynamic-syms) and -R
2422 (--dynamic-reloc) arguments to objdump.
2423 * nm.c (dynamic): New static variable.
2424 (long_options): Added "dynamic".
2425 (usage): Mention -D and --dynamic.
2426 (main): Add D to getopt string. Handle -D by setting dynamic.
2427 (display_rel_file): If dynamic is non-zero, read dynamic symbols
2428 rather than normal symbols.
2429 * nm.1: Updated for -D (--dynamic) option.
2430 * objdump.c (dump_dynamic_symtab): New global variable.
2431 (dump_dynamic_reloc_info): New global variable.
2432 (dynsyms, dynsymcount): New global variables.
2433 (usage): Mention -R, -T, --dynamic-syms and --dynamic-reloc.
2434 (long_options): Added "dynamic-reloc" and "dynamic-syms".
2435 (slurp_symtab): If no symbols, return rather than exit.
2436 (slurp_dynamic_symtab): New function.
2437 (display_bfd): Handle dump_dynamic_symtab and
2438 dump_dynamic_reloc_info.
2439 (dump_symbols): Take new dynamic argument, indicating whether to
2440 display dynamic symbols.
2441 (dump_relocs): Move most printing into dump_reloc_set.
2442 (dump_dynamic_relocs): New function.
2443 (dump_reloc_set): New function, extracted from dump_relocs.
2444 (main): Add R and T to getopt string. Handle -T by setting
2445 dump_dynamic_symtab and -R by setting dump_dynamic_reloc_info.
2446 * objdump.1: Updated for -R (--dynamic-reloc) and -T
2447 (--dynamic-syms) options.
2448 * binutils.texi: Updated for new nm and objdump options.
2450 Wed Mar 30 15:52:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2452 Update for recent BFD changes to symbol and reloc reading. Rename
2453 all uses of get_symtab_upper_bound to bfd_get_symtab_upper_bound.
2455 * coffgrok.c (symcount): Change to long.
2456 (do_sections_p1): Check for error return from
2457 bfd_get_reloc_upper_bound. Change relcount to long, and check for
2458 error from bfd_canonicalize_reloc.
2459 (coff_grok): Change storage to long. Check for error from
2460 bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
2461 * nlmconv.c (main): Change symcount, newsymalloc, newsymcount, and
2462 i to long. Check for error from bfd_get_symtab_upper_bound and
2463 bfd_canonicalize_symtab.
2464 (copy_sections): Change reloc_size and reloc_count to long. Check
2465 for error from bfd_get_reloc_upper_bound and
2466 bfd_canonicalize_reloc.
2467 (mangle_relocs, i386_mangle_relocs, alpha_mangle_relocs): Change
2468 reloc_count_ptr argument to long *. Make corresponding changes to
2469 variables loaded from *reloc_count_ptr.
2470 * nm.c (display_rel_file): Change storage and symcount to long.
2471 Check for errors from bfd_get_symtab_upper_bound and
2472 bfd_canonicalize_symtab.
2473 * objcopy.c (filter_symbols): Change symcount, src_count and
2475 (copy_object): Change symcount to long. Pass another argument to
2476 fprintf. Check for errors from bfd_get_symtab_upper_bound and
2477 bfd_canonicalize_symtab.
2478 (copy_section): Change relcount to long. Check for errors from
2479 bfd_get_reloc_upper_bound and bfd_canonicalize_reloc.
2480 (mark_symbols_used_in_relocations): Change relcount and i to long.
2481 Check for errors form bfd_get_reloc_upper_bound and
2482 bfd_canonicalize_reloc.
2483 * objdump.c (storage): Remove global variable.
2484 (symcount): Changed to long.
2485 (slurp_symtab): New local variable storage. Check for errors from
2486 bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
2487 (remove_useless_symbols): Change return value and count to long.
2488 (objdump_print_address): Change min, max, thisplace and i to long.
2489 (disassemble_data): Change i to long.
2490 (dump_symbols): Change count to long.
2491 (dump_relocs): Change relcount to long. Check for errors from
2492 bfd_ret_reloc_upper_bound and bfd_canonicalize_reloc.
2493 (display_info_table): Add casts when passing LONGEST_ARCH for
2496 Tue Mar 29 14:59:04 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2498 * nm.c (display_archive): Close each archive element after it has
2500 * objdump.c (display_file): Likewise.
2502 Mon Mar 28 13:04:08 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2504 * configure.in: Change error message to refer to bfd/config.bfd
2505 rather than bfd/configure.in.
2507 Sun Mar 27 16:23:39 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2509 * More fixes for object formats which allow multiple sections
2511 * objcopy.c (setup_section): Make a new output section even if
2512 one already exists with the given name.
2513 (copy_section): Use isection->output_section rather than trying
2514 to look the output section up by its (possibly non-unique) name.
2516 * Makefile.in (install-info): Look for binutils.info in the
2517 current directory, then in $(srcdir). Don't use $<.
2519 Mon Mar 21 12:55:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2521 * objdump.c (objdump_print_address): Make static. Declare with
2522 prototype. Change vardiff from int to bfd_signed_vma. Correct
2523 binary search termination condition. When looking for same
2524 section symbol in relocatable file, handle final symbol correctly.
2526 Sun Mar 20 11:26:36 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2528 * Makefile.in: Avoid bug in hpux sed.
2530 * objcopy.c: Changes to keep it from stripping symbols used
2531 in output relocations.
2532 (mark_symbols_used_in_relocations): New function. Mark symbols
2533 used in output relocations with BSF_KEEP.
2534 (filter_symbols): Do not strip symbols marked with BSF_KEEP.
2535 (copy_object): Reorder actions. First setup sections, then
2536 build the output symbol table, then copy the section contents.
2538 Fri Mar 18 10:53:55 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2540 * ar.c (write_archive): Allocate space for the null byte. From
2541 Robert Lipe <robertl@arnet.com>.
2543 Thu Mar 17 16:20:28 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2545 * Makefile.in: Built nm.new and strip.new to avoid problems with
2546 collect when . is in PATH.
2547 (STRIP_PROG): Change from strip to strip.new.
2548 (NM_PROG): Change from nm to nm.new.
2549 (install): Remove the .new when installing.
2551 Wed Mar 16 16:27:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2553 * nlmconv.c (powerpc_build_stubs): Set BSF_DYNAMIC flag for each
2554 symbol for which we build a stub.
2555 (powerpc_mangle_relocs): Only reset TOC pointer for a call to a
2556 symbol with BSF_DYNAMIC flag set.
2558 Tue Mar 15 23:04:13 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2560 * objcopy.c (filter_symbols): Use bfd_is_local_label to determine
2561 if a symbol represents a compiler-generated local label.
2562 (copy_object): Give the BFD backends a chance to copy any private
2563 bfd data from the input BFD to the output BFD.
2564 (setup_section): Give the BFD backends a chance to copy any private
2565 section data from the input section to the output section.
2567 Mon Mar 14 11:15:58 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2569 * objcopy.c (mangle_section): Delete unused function.
2570 (setup_section): Set osection here instead of calling
2571 mangle section to do it.
2573 Mon Mar 14 12:11:01 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2575 * ar.c (write_archive): Close inarch before unlinking it.
2577 Fri Mar 11 22:20:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2579 * nlmconv.c (main): For PowerPC, call powerpc_build_stubs and
2580 powerpc_resolve_stubs. Use __GOT0, not __toc_start. Handle it if
2581 the start and end symbols are not in the text section.
2582 (struct powerpc_stub): New struct definition.
2583 (powerpc_stubs, powerpc_stub_insns): New static variables.
2584 (powerpc_initial_got_size): New static variable.
2585 (powerpc_build_stubs): New function.
2586 (powerpc_resolve_stubs): New function.
2587 (powerpc_mangle_relocs): Clear extraneous data in .got section.
2588 Rearrange reloc handling to handle ELF relocs that are not
2589 partial_inplace. Resolve PC relative relocs.
2591 Wed Mar 9 13:48:11 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2593 * ar.c (move_members): Fix it so that the abi positional modifiers
2594 don't delete all archive members following the insert point.
2596 Tue Mar 8 13:14:43 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2598 * coffgrok.[ch]: New files, understand coff objects.
2599 * coffdump.c: Uses coffgrok to dump out the debug info of a coff
2601 * sysroff.info: Description of a SYSROFF object file.
2602 * sysinfo.y, syslex.l: Parse info file, generate a reader, writer,
2603 header files and a printer.
2604 * srconv.c: Uses coffgrok.c and sysroff.info to convert a coff
2605 file to a SYSROFF file.
2607 Sat Feb 26 13:35:26 1994 Stan Shebs (shebs@andros.cygnus.com)
2609 * ar.c (do_quick_append): Pad with a genuine character 10,
2610 rather than whatever '\n' might happen to be.
2612 Tue Feb 22 18:25:52 1994 Ian Lance Taylor (ian@cygnus.com)
2614 * nlmconv.c (main): Ignore debugging symbols when looking for
2615 special symbols by name.
2617 Sun Feb 20 18:47:42 1994 Ian Lance Taylor (ian@lisa.cygnus.com)
2619 * nlmconv.c: Include libiberty.h.
2621 Support for PowerPC NetWare.
2622 * nlmconv.c (main): For PowerPC NetWare, automatically define the
2623 special symbols __toc_start.
2624 (select_output_format): Handle bfd_arch_powerpc.
2625 (mangle_relocs): Likewise.
2626 (powerpc_mangle_relocs): New function.
2628 Thu Feb 17 09:28:23 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2630 * ar.c, bucomm.c, nlmconv.c, nm.c, objcopy.c, objdump.c,
2631 size.c: Use bfd_get_error and bfd_set_error and new error names.
2633 Fri Feb 11 15:54:51 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2635 * objcopy.c (strip_main, copy_main): Add missing 'break' in switch.
2637 Mon Feb 7 19:45:52 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2639 * objdump.c (disassemble_data): Handle bfd_arch_powerpc.
2641 Sun Feb 6 22:08:20 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2643 * strings.c objdump.c nlmconv.c objcopy.c nm.c ar.c size.c (main):
2644 Call xmalloc_set_program_name.
2646 Fri Feb 4 10:46:01 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2648 * objcopy.c (filter_bytes): Make MEMHUNK a char *, not PTR, so we
2649 can do arithmetic on it.
2651 Thu Feb 3 14:06:41 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2653 * objdump.c (dump_section_stabs, read_section_stabs,
2654 print_section_stabs): Functions broken out of dump_stabs_1.
2655 Free the stabs and strings when done with them.
2657 Wed Feb 2 13:42:23 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2659 * nlmconv.c (main): Use bfd_get_flavour instead of struct member.
2660 * ar.c (print_contents, extract_file), size.c
2661 (print_berkeley_format, print_sysv_format): Use bfd_get_filename and
2662 bfd_my_archive instead of dereferencing the structs directly.
2664 * ar.c: Use bfd_fatal and bfd_nonfatal instead of bfd_perror and exit.
2665 Indent. Remove DEFUNs.
2667 * nlmconv.c (main), objcopy.c (copy_file): Print matching formats
2669 * nm.c (display_file, display_archive), size.c (display_bfd):
2671 Print matching formats if there is an ambiguous match. Use
2672 bfd_nonfatal instead of hardcoded error message if nothing matches.
2674 * arsup.c, ar.c, objdump.c: Use bfd_get_filename instead of
2677 * nm.c (display_archive): New function, from code in display_file.
2678 (display_rel_file): Renamed from do_one_rel_file.
2681 (display_archive): New function from code in display_file.
2682 (display_file): Check bfd_close error return.
2684 * strings.c (strings_object_file): Check bfd_check_format
2687 * strings.c, objdump.c, size.c: Use bfd_nonfatal instead of bfd_perror.
2689 * bucomm.c: Delete references to exit_handler. It wasn't set
2690 anywhere, and now that we're using the libiberty xmalloc, it
2691 wouldn't always get called before exiting.
2692 (list_matching_formats): Function moved from objdump.c.
2693 * bucomm.h: Declare it.
2695 * objdump.c (disassemble_data): Move some variable decls closer to
2696 their use. Add some comments. Replace a nested block with a
2699 Mon Jan 31 18:50:41 1994 Stan Shebs (shebs@andros.cygnus.com)
2701 * objdump.c (display_target_list, display_info_table): Check that
2702 the bfd of the dummy output file is not null.
2704 Wed Jan 26 13:13:18 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2706 * objcopy.c (filter_bytes): New function.
2707 (copy_section): Call it.
2708 (copy_options, copy_usage, copy_main): Add --byte option to
2709 activate it. Appropriate the -b option (which was an undocumented
2710 synonym for -F) for it, also. Add --interleave, -i option for
2712 (setup_section, copy_section, mangle_section): Renamed with no `s'
2714 * objcopy.1, binutils.texi: Document the new options.
2716 * objdump.c (display_target_tables, display_target_list):
2717 New functions broken out of display_info.
2718 Eliminate some magic constants. Use more meaningful variable names.
2719 (dump_bfd_header): New function broken out of display_bfd.
2720 (dump_section_header): New function broken out of dump_headers.
2721 (remove_useless_symbols): Don't shadow global variable name with
2723 (objdump_print_address): Fix backward test.
2725 Tue Jan 25 19:40:54 1994 Stan Shebs (shebs@andros.cygnus.com)
2727 * bucomm.c (print_arelt_descr): Change decl of `when' to time_t.
2728 * objdump.h: Removed.
2730 Mon Jan 24 13:29:02 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2732 * objdump.c (display_file): Remove call to list_matching_formats.
2733 It would never be called.
2734 (list_matching_formats): Take an arg giving the list of matching
2736 (display_bfd): Pass the arg, and get it filled in by calling
2737 bfd_check_format_matches instead of bfd_check_format.
2738 (display_info, display_info_table): target_vector was renamed to
2741 * binutils.texi (objdump): Note some limitations of -h section
2744 Sat Jan 22 16:20:46 1994 Stan Shebs (shebs@andros.cygnus.com)
2746 * Makefile.in (MALLOC): Set to emptiness by default.
2747 (ALL_CFLAGS): Add and use.
2748 (arparse.h): Make it depend on arparse.y.
2749 * ar.c (libbfd.h): Don't require to be in ../bfd.
2750 * objdump.c (comp): Rename to compare_symbols.
2752 Fri Jan 21 20:22:30 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2754 * objdump.c (list_matching_formats): If the file format is ambiguous,
2755 print the matching names so the user can choose one.
2756 (display_bfd): Call it.
2757 (display_file): Call it.
2759 Fri Jan 21 19:17:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2761 * objdump.c (disassemble_data): Support bfd_arch_rs6000.
2763 Mon Jan 17 13:57:25 1994 Stan Shebs (shebs@andros.cygnus.com)
2765 * objdump.c (stab_name): Allocate dynamically.
2766 (stab_print): Use pointers to strings instead of char arrays.
2767 (dump_stabs): Change alloc and init of arrays appropriately.
2768 (dump_stabs_1): Always decide whether to print stab_name or
2769 the stab's type number, if unnamed.
2771 Fri Jan 14 14:42:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2773 * objcopy.c (strip_main, copy_main): Don't clobber the input file
2776 * nlmconv.c (main): Warn about an attempt to use a shared library
2777 with uninitialized data.
2779 * nlmconv.c (setup_sections): Make sure that we align the
2780 output_offset of each input section appropriately.
2782 Thu Jan 13 17:32:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2784 * objdump.c (dump_relocs): Don't crash if section name is NULL.
2786 Tue Jan 11 19:46:33 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2788 * filemode.c (filemodestring): Commented out; not used.
2789 (mode_string): Use POSIX definitions.
2790 (ftypelet): Likewise.
2791 (rwx): Removed; no longer used.
2792 * bucomm.c: Include bucomm.h.
2793 (bfd_nonfatal, bfd_fatal): Argument is const.
2794 (fatal): Make __STDC__ version.
2795 * bucomm.h (mode_string): Declare.
2796 * Makefile.in (bucomm.o): Depend upon bucomm.h
2798 Sun Jan 9 12:03:20 1994 Ken Raeburn (raeburn@rtl.cygnus.com)
2800 * bucomm.c (xmalloc, xrealloc): Deleted.
2801 * bucomm.h (xmalloc, xrealloc): Fix prototypes, to correspond to
2802 libiberty version of functions.
2804 Thu Jan 6 06:18:15 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2806 * binutils.texi: Add a chapter summarizing the ways to select
2807 aspects of the target for each program.
2809 * objdump.c (long_options, usage): Add long equivalents for all
2810 remaining short options that lacked them.
2811 * binutils.texi objdump.1: Document them.
2813 * size.c (usage): Tweak usage message.
2814 * size.1: Add missing `=' in examples.
2816 * binutils.texi strip.1 objcopy.1 nlmconv.1 objcopy.c nlmconv.c:
2817 Use "--target=bfdname" as the option to select the BFD target,
2818 like nm and size already do.
2819 Reserve "--format=format" for textual output selection options, but
2820 for now keep old option names as obsolete for backward compatibility.
2822 * strings.c (main, strings_object_file, usage): Add --target option.
2823 * binutils.texi strings.1: Document it.
2825 Sat Jan 1 13:58:24 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2827 * ar.c (main): Add \n in error message.
2829 Thu Dec 23 12:23:11 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2832 * ar.c (main): Put parens around assignment used as truth value.
2833 * objcopy.c (strip_main): Remove unused variables. Return 0.
2834 (copy_main): Remove unused variables. Return 0.
2835 * objdump.c (display_bfd): Declare return value as void.
2836 (stab_print): Use "" instead of 0 to initialize array.
2837 (dump_stabs_1): Print vma using printf_vma.
2838 (display_info): Put parens around assignment used as truth value.
2839 * strings.c (print_strings): Cast printf arguments.
2841 * objcopy.c (copy_main): Use copy_options, not strip_options.
2843 * nlmheader.y (command): Warn about illegal date values.
2845 Wed Dec 15 11:18:03 1993 David J. MacKenzie (djm@frosty.eng.umd.edu)
2847 * bucomm.c bucomm.h: Run through indent. De-ansidecl-ify.
2848 (bfd_nonfatal): New function.
2849 (bfd_fatal): Call it.
2851 * objcopy.c (smart_rename): Do a copy if the dest file has
2852 multiple hard links. Remove source file on successful copy.
2853 Try to preserve mode and owner on successful rename.
2855 * objcopy.c: Run through indent. Clean up a bit.
2856 Make global variables static.
2857 Make {input,output}_{target,filename}, show_version local
2858 to various functions.
2859 New global variable `status' for exit status.
2860 (strip_main, copy_main): New functions with code from main.
2861 (nonfatal): New macro. Use it globally instead of bfd_perror and
2864 (copy_object): Call mangle_sections with bfd_map_over_sections.
2865 (mangle_sections): Adjust for new calling convention.
2867 Fri Dec 10 11:28:11 1993 Ian Lance Taylor (ian@deneb.cygnus.com)
2869 * nlmheader.y (command): Accept MAP and FULLMAP without arguments.
2870 * nlmconv.c (main): Change error message for MAP and FULLMAP.
2872 Thu Dec 9 17:47:19 1993 Ian Lance Taylor (ian@deneb.cygnus.com)
2874 * nlmconv.c (main): Warn about imported symbols that are not in
2875 the IMPORT list even if the IMPORT keyword is not used.
2877 * nlmconv.c (debug, unlink_on_exit): New static variables.
2878 (long_options): Add "debug" and "linker".
2879 (main): Handle -d and -l arguments. Make command line input and
2880 output files optional. Parse the command file before opening the
2881 BFD's, which requires storing more information in local variables.
2882 If INPUT names multiple files, link them together. Use OUTPUT for
2883 the output file name if not named on command line.
2884 (show_usage): Changed for new options.
2885 (link_inputs): New function to automatically invoke linker to
2886 handle multiple INPUT files.
2887 (choose_temp_base_try, choose_temp_base, pexecute): New functions,
2888 mostly copied from gcc/gcc.c.
2889 * nlmconv.h (input_files, output_file): Declare.
2890 * nlmheader.y (input_files, output_file): Define.
2891 (command): Support INPUT with a string_list argument. Support
2893 (string_list): Renamed from module_list.
2894 * Makefile.in (nlmconv.o): Define LD_NAME based on
2895 program_transform_name.
2897 Wed Dec 8 10:09:04 1993 Ian Lance Taylor (ian@deneb.cygnus.com)
2899 * nlmheader.y (nlmheader_identify): New function. Use it to print
2900 the program name just once, instead of with every error message.
2902 Mon Dec 6 16:11:32 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2904 * nlmconv.c (long_options): Changed --header-info to --header-file
2905 to match documentation and usage message.
2907 Sun Dec 5 01:31:01 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
2909 * objdump.c (dump_relocs): Avoid dereferencing a NULL sym_ptr_ptr
2912 Thu Dec 2 16:00:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2914 * nlmconv.c (main): Change various types from bfd_size_type to
2915 size_t, since they have to be arguments to fread and fwrite.
2916 Change set from char * to unsigned char *.
2917 (select_output_format): Make mach argument unsigned. Handle
2919 (setup_sections): Don't copy the .reginfo section of an ECOFF
2920 file. Call bfd_set_reloc to initialize the relocation fields.
2921 (copy_sections): Don't copy the .reginfo section of an ECOFF file.
2922 Combine all relocs for a section.
2923 (mangle_relocs): Change type of relocs to permit specific
2924 functions to change it. Call alpha_mangle_relocs for alpha,
2925 default_mangle_relocs for other architectures.
2926 (default_mangle_relocs): New function. Adjust the address of all
2927 relocs by the output_offset.
2928 (i386_mangle_relocs): Change type of relocs argument. Cast length
2929 argument to memmove to size_t.
2930 (alpha_mangle_relocs): New function.
2932 Wed Nov 17 17:38:58 1993 Sean Eric Fagan (sef@cygnus.com)
2934 * nlmconv.c (select_output_format): Use nlm32-sparc for
2937 Wed Nov 17 14:41:35 1993 Jeffrey Osier (jeffrey@thepub.cygnus.com)
2939 * nlmconv.1: added man page
2940 * objcopy.1: fixed format errors
2942 Wed Nov 17 12:03:41 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2944 * Makefile.in: Use CFLAGS as well as LDFLAGS when linking.
2946 Wed Nov 17 04:50:55 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2948 * strings.1: Fix typo.
2950 Mon Nov 15 12:03:20 1993 Ken Raeburn (raeburn@rtl.cygnus.com)
2952 * Makefile.in (DISTSTUFF): Build "info".
2953 (VERSION): Updated to cygnus-2.3.1; 2.3 has gone out.
2955 Sun Nov 14 00:27:24 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
2957 * objdump.c (dump_stabs): Handle stabs-in-som as implemented
2958 by the new BFD SOM assembler.
2960 Sat Nov 13 07:14:05 1993 David J. Mackenzie (djm@rtl.cygnus.com)
2962 * ar.1 c++filt.1 nm.1 objcopy.1 objdump.1 ranlib.1 size.1
2963 strings.1 strip.1: Replace \(em in NAME section with \- so
2964 makewhatis can grok it.
2966 Tue Nov 9 15:22:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2968 * nlmconv.c (i386_mangle_relocs): Adjust reloc address by
2969 section output_offset.
2971 Fri Nov 5 12:11:52 1993 Jeffrey Osier (jeffrey@thepub.cygnus.com)
2973 * binutils.texi: added nlmconv chapter
2975 Wed Nov 3 16:10:50 1993 Jeffrey Wheat (cassidy@cygnus.com)
2977 * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS
2979 Wed Nov 3 15:09:23 1993 Ken Raeburn (raeburn@rover.cygnus.com)
2981 * Makefile.in (distclean): Don't get rid of dvi or info files.
2983 Tue Nov 2 13:29:59 1993 David J. Mackenzie (djm@rtl.cygnus.com)
2985 * objcopy.c (S_ISLNK): Define as 0 if there's no S_IFLNK.
2987 Fri Oct 29 16:02:34 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2989 * binutils.texi: Move objcopy docs into alphabetical order.
2991 * objdump.c: Use xmalloc instead of malloc.
2993 Fri Oct 29 11:11:14 1993 Stan Shebs (shebs@rtl.cygnus.com)
2995 * objdump.c (info): Rename to formats_info.
2996 (dump_stabs_1): Better comments and formatting.
2998 Thu Oct 28 19:43:16 1993 Stan Shebs (shebs@rtl.cygnus.com)
3000 * ar.c (main): Always create the archive when quick appending,
3001 even if no input files have been given.
3003 Wed Oct 27 12:03:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3005 * nlmconv.c (main): Set sharedDebugRecordOffset and
3006 sharedDebugRecordCount fields in extended header.
3008 * nlmconv.c (main): Force moduleName field to upper case.
3010 Mon Oct 25 16:45:42 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3012 * objcopy.c (main): Give a usage message if there are too many
3015 Mon Oct 25 10:37:08 1993 Ken Raeburn (raeburn@rover.cygnus.com)
3017 * Makefile.in (install-info): Rewrite to take advantage of VPATH,
3018 so FSF distributions (with info files in $(srcdir)) install
3020 (DISTSTUFF): Build nlmheader.c too.
3022 Fri Oct 22 11:43:23 1993 Ken Raeburn (raeburn@rover.cygnus.com)
3024 * ar.c (program_name): Don't define here.
3025 * objdump.c: Include "bucomm.h".
3026 (xmalloc): Don't declare here.
3027 (program_name): Don't define here.
3028 (program_version): Fixed type in declaration.
3029 * size.c: Include "bucomm.h".
3030 (program_name): Don't declare here.
3032 Fri Oct 22 14:10:41 1993 Mark Eichin (eichin@cygnus.com)
3034 * objdump.c (fprintf): hide declaration in FPRINTF_ALREADY_DECLARED
3036 Fri Oct 1 12:43:00 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3038 * nlmconv.c (i386_mangle_relocs): Resolve and remove PC relative
3039 relocs against defined symbols in the same section.
3041 Thu Sep 30 16:46:26 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
3043 * Makefile.in (binutils.dvi): use TEXIDIR to find texinfo.tex
3045 Sat Sep 25 18:09:29 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3047 * objcopy.c (simple_copy, smart_rename): New functions.
3050 Fri Sep 24 15:38:29 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3052 * Makefile.in (clean, distclean): Recurse into testsuite.
3054 Thu Sep 23 01:05:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3056 * objcopy.c (setup_sections, copy_sections): If stripping, don't
3057 copy SEC_DEBUGGING sections.
3058 * objdump.c (dump_headers): Print SEC_DEBUGGING flag.
3060 * objdump.c (usage): Mention --stabs.
3062 * objcopy.c (copy_object): Copy all applicable file flags.
3063 (copy_file): Don't copy EXEC_P specially here.
3065 Mon Sep 20 19:28:57 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3067 * nlmconv.c (main): Adjust data section size to correspond to bss
3068 alignment adjustment. Clear BSF_SECTION_SYM if symbol is moved to
3069 a different section. Use time_t for time variable.
3070 (setup_sections): Only put sections with contents in output NLM.
3071 (i386_mangle_relocs): No symbols are common at this point. Add
3072 casts to avoid warnings.
3074 Fri Sep 10 11:00:40 1993 Stan Shebs (shebs@rtl.cygnus.com)
3076 * objdump.c: Made the --stabs option work for stabs-in-coff.
3077 (ELF_STAB_DISPLAY): Removed.
3078 (dump_elf_stabs): Renamed to dump_stabs, changed to run for
3079 any object file format.
3080 (dump_elf_stabs_1): Renamed to dump_stabs_1, added calls to
3081 generic BFD routines for non-ELF case, changed format of message
3082 for no-section-found case.
3083 (display_bfd): Always call dump_stabs if requested.
3084 (dump_data): Call bfd_section_size to get section size.
3086 Fri Sep 10 08:12:23 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3088 * Makefile.in (install): Don't put strings in tooldir/bin.
3090 Mon Sep 6 15:39:04 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3092 * nlmconv.c (total_bss_size): Removed.
3093 (main): Set the bss vma to always follow the data section. Move
3094 symbols into new sections, and adjust values by output_offset.
3095 (setup_sections): Don't copy all sections, but instead point all
3096 text sections to .text, all data sections to .data, and all bss
3098 (copy_sections): Adjust accordingly.
3100 Thu Sep 2 12:34:03 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3102 Only build nlmconv if configured for a NetWare target.
3103 * configure.in: If we have some *-*-netware* target, or are using
3104 all targets, set BUILD_NLMCONV to $(NLMCONV_PROG) in Makefile.
3105 * Makefile.in (PROGS): Use $(BUILD_NLMCONV) rather than
3108 Tue Aug 31 14:13:35 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3110 * objdump.c (ARCH_all): Define ARCH_hppa too.
3111 (dump_headers): Don't test for SEC_BALIGN if it's not defined by
3114 Tue Aug 31 13:29:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3116 * nlmconv.c (main): Force creation of .bss section. Set up the
3117 sections before looking at the symbols. Move all common symbols
3118 into .bss section. Automatically define _edata and _end. Only
3119 export symbols in the export list, with multiple prefixes if
3120 necessary. Warn if no version. Always create extended header.
3121 Set date automatically if not already set.
3122 (setup_sections): Count size of bss sections.
3123 (mangle_relocs, i386_mangle_relocs): Accept section argument, and
3124 take reloc_count as a changeable pointer; changed callers.
3125 (i386_mangle_relocs): Remove PC relative relocs within a section,
3126 as they require no adjustment.
3127 * nlmheader.y: Fixed memory allocation throughout: token STRING is
3128 now allocated on the heap, and freed if not needed. Null
3129 terminated copyright message. Accept version with only two
3131 (symbol_list_opt): New nonterminal, either symbol_list or empty.
3132 (symbol_list): Use left recursion to avoid overflowing parser
3134 (yylex): Rearranged beginning of line check. Accept quoted
3135 strings using single quotes. End generic argument at comment
3136 character or parentheses.
3137 (string_list_append): Fixed.
3138 (string_list_append1): New function.
3140 * bucomm.h: The first argument to xrealloc is PTR, not char *.
3141 * bucomm.c (xrealloc): Use PTR rather than char *.
3142 * Makefile.in (objdump.o): Depend upon config.status to notice
3143 --with-targets changes.
3144 (nlmconv.o): Depend upon bucomm.h.
3146 Tue Aug 17 09:46:01 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3148 * configure.in: Don't pass cpu to config.bfd.
3150 Thu Aug 12 16:43:04 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3152 * Makefile.in ($(NM_PROG)): Depend on demangle.o.
3153 (demangle.o): New target.
3154 (cplus-dem.o): Depend on it, to force compilation order when doing
3157 * nm.c (print_symbol_info_{bsd,sysv,posix}): Take a bfd arg.
3158 (struct output_fns print_symbol_info): Ditto.
3159 (long_options, usage, main): Add -C --demangle option.
3160 (print_symname): New function, demangling if requested.
3161 (print_symbols, print_symbol_info_{bsd,sysv,posix}): Use it.
3163 Wed Aug 11 22:57:23 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3165 * Makefile.in: Put CFLAGS last in compilation rules and omit from
3166 linking rules. Use ARCHDEFS to compile objdump.c.
3167 Update dependencies.
3168 * configure.in: Construct ARCHDEFS based on the BFD target makefile
3170 * objdump.c: Conditionalize calls to the print_insn_ARCH functions
3171 according to ARCHDEFS.
3173 Thu Aug 12 08:06:15 1993 Ian Lance Taylor (ian@cygnus.com)
3175 * ar.c: Removed obsolete and non-functional GNU960 code.
3177 Wed Aug 11 13:08:26 1993 Ian Lance Taylor (ian@cygnus.com)
3179 * size.c (berkeley_sum): New function.
3180 (bsssize, datasize, textsize): New global variables.
3181 (bss_section_name, data_section_name, text_section_name): Removed.
3182 (print_berkeley_format): Map berkeley_sum over all the sections,
3183 rather than only reporting sizes of specifically named sections.
3184 * Makefile.in ($(OBJDUMP_PROG)): Removed dependency on size.o.
3186 Tue Aug 10 10:46:01 1993 Ian Lance Taylor (ian@cygnus.com)
3188 * nlmconv.c, nlmconv.h, nlmheader.y: New files for program to
3189 convert object files into NetWare Loadable Modules.
3190 * Makefile.in (NLMCONV_PROG): New macro, define to be nlmconv.
3191 (PROGS): Add NLMCONV_PROG.
3192 (nlmheader.c, nlmheader.o, nlmconv.o, $(NLMCONV_PROG)): New
3195 Thu Aug 5 15:48:32 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com)
3197 * Makefile.in: define MAKEOVERRIDES to an empty string
3199 Wed Aug 4 17:08:08 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3201 * objcopy.c (copy_file): Make failures to process a file nonfatal.
3203 Mon Aug 2 11:28:23 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3205 * nm.c: Add -B option, like --format=bsd.
3207 Tue Jul 27 16:29:54 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3209 * objcopy.c (copy_file): If the file is neither an object nor an
3210 archive, give an error rather than returning success.
3212 Mon Jul 19 16:13:40 1993 Ken Raeburn (raeburn@rtl.cygnus.com)
3214 * objdump.c (objdump_print_address): Prefer non-local symbols over
3215 local ones, and especially discriminate against debugging symbols.
3216 Also, for relocateable files, try to find a symbol in the current
3217 section, instead of picking one from some random section with a
3218 convenient value (read, section offset).
3219 (disassemble_data): Cast argument to malloc to size_t first.
3220 (dump_data): Likewise.
3221 (dump_relocs): If a single section name is specified, show relocs
3222 only for that section. Otherwise, silently omit sections without
3223 relocs. Format table nicely even if values are printed using 16
3224 digits instead of 8.
3226 Fri Jul 16 15:19:59 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3228 * nm.c: Changes for final version of POSIX.2.
3229 (print_symbol_filename_{bsd,sysv,posix}): New functions.
3230 (formats): Add an element for a pointer to them.
3231 (print_symbols): Call it.
3232 (print_object_filename_posix, print_archive_member_posix): Produce
3233 output according to new POSIX.2 spec.
3235 * strings.c (print_strings): Handle STREAM being NULL.
3236 (strings_a_section): Pass a NULL.
3237 (main): Don't open /dev/null.
3239 Thu Jul 15 12:44:09 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3241 * objdump.c (disassemble_data): Handle the m88k.
3242 (display_bfd): Use bfd_errmsg, rather than just claiming that the
3243 bfd is not an object file.
3245 Mon Jul 12 17:55:34 1993 K. Richard Pixley (rich@cygnus.com)
3247 * Makefile.in (TAGS): make work again by naming directories
3248 explicitly rather than depending on undefined macros.
3249 (INSTALL_XFORM): correct bad install target.
3251 Fri Jul 2 16:58:34 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3253 * strings.c: Doc fixes.
3255 Sun Jun 27 13:35:24 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3257 * Makefile.in: Note dependencies on bucomm.h.
3258 (cplus-dem.o): Link c++filt with version.o.
3260 * strings.c: Include bucomm.h and add prototypes to other decls.
3263 * bucomm.h: Declare xrealloc.
3265 * nm.c, objcopy.c, objdump.c, size.c, strings.c (main, usage): Add
3266 --help option. Put "GNU" in the version message.
3267 (usage): Take stream and exit status as args.
3268 (main): Pass new args to usage.
3270 Fri Jun 25 23:12:12 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3272 * strings.c, strings.1: New files.
3273 * binutils.texi: Document strings.
3274 * Makefile.in: Add rules for it.
3276 Fri Jun 25 20:44:43 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3278 * objdump.c: Use size-independent bfd elf section names.
3280 Sun Jun 20 23:09:06 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3282 * objdump.c (objdump_print_address): Handle wide offsets by
3283 calling sprintf_vma.
3285 Fri Jun 18 14:29:12 1993 Per Bothner (bothner@deneb.cygnus.com)
3287 * objdump.c (syms2): Removed unused variable.
3288 * objdump.c (remove_useless_symbols): New function.
3289 * objdump.c (comp): Simplify.
3290 * objdump.c (dis-assemble_data): Make simpler and more
3291 efficient how we filter out useless symbols: Just filter
3292 BEFORE the sort (using remove_useless_symbols).
3293 * objdump.c (objdump_print_address): Simplify.
3294 Change output syntax to match gdb.
3296 Thu Jun 17 16:53:56 1993 david d `zoo' zuhn (zoo@cygnus.com)
3298 * Makefile.in: canonicalize install.sh; for use within
3299 this directory (and subdirs)
3301 Mon Jun 14 12:13:22 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
3303 * Makefile.in (install, install-info): remove parentdir support,
3304 use INSTALL_XFORM; define INSTALL_XFORM
3306 Thu Jun 10 17:29:21 1993 Per Bothner (bothner@cygnus.com)
3308 * objcopy.c (copy_object): Fix bad size passed to xmalloc().
3310 Mon Jun 7 12:41:12 1993 Per Bothner (bothner@rtl.cygnus.com)
3312 * Makefile.in (INCLUDES): Add -I../bfd for sysdep.h and bfd.h.
3313 * configure.in: No longer need to configure to get sysdep.h.
3314 * objcopy.c (copy_object): Fix symbol table handling.
3316 Fri Jun 4 17:20:03 1993 Per Bothner (bothner@cygnus.com)
3318 * objcopy.c (filter_symbols): Cannot filter the symbols
3319 in place, because that confuses the relocs, so take separate
3320 parameter for output array.
3321 * objcopy.c (sympp): Make two variables: isympp and osympp.
3322 * objcopy.c (copy_object): Allocate separate array (osympp)
3323 for filtered symbols.
3325 Fri Jun 4 10:51:44 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3327 * Makefile.in: change recursion test to presence of a configured
3330 Thu Jun 3 14:05:57 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3332 * Makefile.in (underscore.c): Hack the backquoted command so it
3333 doesn't cause Solaris make to bomb.
3335 Thu Jun 3 10:40:19 1993 Jeffrey Osier (jeffrey@cygnus.com)
3337 * Makefile.in: added c++filt and objcopy to MANPAGES variable
3338 * .Sanitize: keep c++filt.1 and objcopy.1
3340 Thu Jun 3 00:32:52 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3342 * Makefile.in: rename LOADLIBES to EXTRALIBS
3344 Wed Jun 2 18:30:24 1993 Jeffrey Osier (jeffrey@cygnus.com)
3346 * c++filt.1, objcopy.1: new man pages
3348 Fri May 28 15:01:24 1993 Per Bothner (bothner@rtl.cygnus.com)
3350 * Makefile.in (install): Also install ar and ranlib in
3351 $(tooldir)/bin; needed for building libgcc.a.
3352 * objdump.c (objdump_print_address): Fix the check
3353 "coincidental" label matches by dis-allowing undefined
3356 Thu May 27 16:58:31 1993 Jeffrey Osier (jeffrey@cygnus.com)
3358 * biutils.texi: revised c++filt chapter
3360 Wed May 26 17:24:17 1993 Ian Lance Taylor (ian@cygnus.com)
3362 * Makefile.in (FLAGS_TO_PASS): Pass down CC and CFLAGS.
3364 Tue May 25 00:26:47 1993 Ken Raeburn (raeburn@cygnus.com)
3366 * objdump.c (slurp_symtab): Print warning for bad symbol table.
3367 (bfd_elf32_find_section, Elf32_Internal_Shdr): Updated
3368 declarations and uses.
3370 * Makefile.in (DISTSTUFF): Don't build binutils.mm.
3372 Fri May 21 10:51:19 1993 David J. Mackenzie (djm@rtl.cygnus.com)
3374 * nm.c: Add -f/--format, -P/--portability, -t/--radix options.
3375 Make global variables static.
3376 (main): Make -v like -n, not -V, and make -A like -o, for POSIX.2.
3377 (set_print_radix, set_output_format,
3378 print_{object_filename,archive_filename,archive_member,symbol_info}
3379 {bsd,sysv,posix}): New functions.
3380 (display_file, print_symbols): Call them.
3382 * ar.c: Improve error messages.
3384 * nm.c (main): Handle long options that just set a flag.
3386 * nm.c (main), ar.c (do_show_version), objcopy.c (main), size.c
3387 (main): Exit after printing the version number, per the GNU coding
3390 Mon May 17 13:20:25 1993 Per Bothner (bothner@cygnus.com)
3392 * README, Makefile.in: Minor updates for 2.2.
3394 Fri May 14 11:12:26 1993 Per Bothner (bothner@cygnus.com)
3396 * Makefile.in (underscore.c): Automatically generate
3397 (using nm) a file with the variable prepends_underscore.
3398 * Makefile.in (c++filt): Link underscore.o with cplus-dem.o
3399 so that initial underscores get removed iff appropriate.
3400 * binutils.texi: Preliminary documentation for c++filt.
3401 * Makefile.in, binutils.texi: Set to version 2.2.
3403 * NEWS: Mention copy->objcopy renaming and new c++filt program.
3405 Wed May 12 12:05:36 1993 Ian Lance Taylor (ian@cygnus.com)
3407 * Makefile.in (cplus-dem.o, $(DEMANGLER_PROG)): Build the
3408 demangler via cplus-dem.o, rather than directly from the .c file.
3410 * objcopy.c: Renamed from copy.c, updated comments accordingly.
3411 * Makefile.in, binutils.texi: Renamed copy to objcopy.
3412 * is-strip.c, maybe-strip.c, not-strip.c: Updated comments for
3413 rename of copy to objcopy.
3415 Mon May 10 17:20:18 1993 Per Bothner (bothner@cygnus.com)
3417 * binutils.texi (strip, -v option): Fix typo.
3419 Fri May 7 13:57:50 1993 Ian Lance Taylor (ian@cygnus.com)
3421 * Makefile.in (RUNTEST): Define.
3422 (FLAGS_TO_PASS): Pass down RUNTEST.
3424 Tue May 4 10:06:50 1993 Ian Lance Taylor (ian@cygnus.com)
3426 * Makefile.in (DEMANGLER_PROG): Name it c++filt.
3427 (PROG): Also build and install COPY_PROG.
3429 Mon May 3 19:11:48 1993 Per Bothner (bothner@cygnus.com)
3431 * Makefile.in: Change definition of $(tooldir) to match FSF.
3433 Wed Apr 28 23:41:32 1993 David J. Mackenzie (djm@rtl.cygnus.com)
3435 * size.c (usage): Add missing options.
3436 (main): Clean up option parser.
3438 * objdump.c (usage): Add missing options.
3439 (display_file): Print program name before calling
3442 * nm.c (usage): Add missing options.
3443 (main): Clean up option parser.
3444 (display_file): Print program name before calling
3447 * copy.c (copy_usage, strip_usage): Add missing options.
3449 * ar.c (usage): New function.
3451 (open_inarch, do_quick_append): Print program name before calling
3454 Thu Apr 22 15:01:35 1993 Ian Lance Taylor (ian@cygnus.com)
3456 * nm.c (main): Accept and ignore -A and -B for MIPS compatibility.
3458 Mon Apr 19 14:06:59 1993 Rob Savoye (rob@cygnus.com)
3460 * Makefile.in: Added FLAGS_TO_PASS so tests get run on freshly
3461 built binaries if they exist. (otherwise the path)
3463 Wed Apr 7 22:22:50 1993 Rob Savoye (rob@cygnus.com)
3465 * Makefile.in: Changed check target to use DejaGnu.
3467 Thu Apr 1 12:37:13 1993 Jim Kingdon (kingdon@cygnus.com)
3469 * Makefile.in: Remove am29k-pinsn.c, i960-pinsn.c.
3470 objdump.c: a29k and i960 are `disassemble' not `print'.
3472 * objdump.c: Rename print_address to objdump_print_address
3473 and change parameters.
3474 (disassemble_data): Use objdump_print_address.
3476 Wed Mar 31 10:25:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3478 * objdump.c (disassemble_data): print_insn_sparc is now a
3479 `disassemble' not a `print'.
3480 Makefile.in: Remove sparc-pinsn.c (now in libopcodes.a).
3482 * objdump.c (disassemble_data): Use new read_memory_func stuff.
3484 Thu Mar 25 10:38:11 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3486 * objdump.c (fprintf): Declaration of variadic function had better
3487 be a prototype for ANSI C systems.
3489 Mon Mar 22 23:19:46 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3491 * Makefile.in: rename test-install to install-check
3493 Fri Mar 19 14:40:08 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3495 * objdump.c (disassemble_data): Add H8500.
3497 Fri Mar 19 10:56:51 1993 Jim Kingdon (kingdon@cygnus.com)
3499 * objdump.c (usage): Mention long options.
3501 Thu Mar 18 14:22:17 1993 Per Bothner (bothner@rtl.cygnus.com)
3503 * nm.c: Modify behavior of -o flag for archives to match
3504 BSD4.4 and Sunos 4: Prefix archive name before each line.
3506 * m68k-pinsn.c: Removed. Subsumed by ../opcodes/m68k-dis.c.
3507 * i386-pinsn.c: Removed. Subsumed by ../opcodes/i386-dis.c.
3508 * Makefile.in: Adjust accordingly.
3509 * objdump.c: Support new-style disassemblers (ones that use
3510 the interface of ../include/dis-asm.h).
3512 Thu Feb 25 15:57:00 1993 Per Bothner (bothner@rtl.cygnus.com)
3514 * Makefile.in: When making tar file, remove texinfo/*,
3515 except for texinfo/texinfo.tex.
3516 * ardup.c: Add extern declaration of strdup.
3517 * Makefile.in (testsuite): Add 'else true' since otherwise
3518 Ultrix /bin/sh complains.
3520 Wed Feb 24 19:44:18 1993 Per Bothner (bothner@rtl.cygnus.com)
3522 * Makefile.in: Set VERSION to 2.1.
3523 * README, NEWS: Updates.
3524 * nm.c: Add -v as a synonym for -V.
3526 Tue Feb 23 19:00:50 1993 Mike Werner (mtw@poseidon.cygnus.com)
3528 * configure.in: added testsuite to configdirs.
3529 * Makefile.in: added support for building testsuite.
3531 Mon Feb 22 22:52:10 1993 Per Bothner (bothner@rtl.cygnus.com)
3533 * objdump.c (disassemble_data): Print function names when
3534 given by bfd_find_nearest_line. If not - still print
3537 Mon Feb 22 07:54:03 1993 Mike Werner (mtw@poseidon.cygnus.com)
3539 * binutils/testsuite: made modifications to testcases, etc., to allow
3540 them to work properly given the reorganization of deja-gnu and the
3541 relocation of the testcases from deja-gnu to a "tool" subdirectory.
3543 Mon Feb 22 10:27:24 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3545 * objdump.c (dump_data): Free up section contents each time
3546 through the loop. Reported by minyard@bnr.ca.
3548 Sun Feb 21 10:55:55 1993 Mike Werner (mtw@poseidon.cygnus.com)
3550 * binutils/testsuite: Initial creation of binutils/testsuite.
3551 Migrated dejagnu testcases and support files for testing nm to
3552 binutils/testsuite from deja-gnu. These files were moved "as is"
3553 with no modifications. This migration is part of a major overhaul
3554 of dejagnu. The modifications to these testcases, etc., which
3555 will allow them to work with the new version of dejagnu will be
3556 made in a future update.
3558 Fri Feb 12 10:05:20 1993 Fred Fish (fnf@cygnus.com)
3560 * Makefile.in (LIBIBERTY_SRC_DIR, LIBIBERTY_BIN_DIR): New macros.
3561 * Makefile.in (LIBIBERTY): Use LIBIBERTY_BIN_DIR.
3562 * Makefile.in (DEMANGLER_PROG): New program to build. Add macro
3564 * Makefile.in (PROGS): Add DEMANGLER_PROG.
3566 Tue Jan 26 11:56:33 1993 Ian Lance Taylor (ian@cygnus.com)
3568 * copy.c, nm.c, objdump.c, size.c: Use new bfd_is_com_section
3569 macro rather than checking for equality to bfd_com_section.
3571 Fri Jan 8 15:50:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3573 * objdump.c (disassemble_data): Fix code to find first useless
3576 Thu Jan 7 13:13:31 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3578 * objdump.c (disassemble_data): Use mips_print_insn for MIPS.
3579 Don't core dump if bfd_find_nearest_line returns false.
3581 Wed Jan 6 17:14:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3583 * objdump.c (disassemble_data): know how to disassemble z8000s
3586 Wed Jan 6 15:16:27 1993 Per Bothner (bothner@cygnus.com)
3588 * arsup.h (interactive), bucomm.h (program_name): Prefix
3589 with 'extern', to avoid warnings from some compilers.
3591 Wed Jan 6 15:14:11 1993 Per Bothner (bothner@rtl.cygnus.com)
3593 * arparse.y: fix unnecessary shift/reduce
3595 Tue Dec 22 15:46:56 1992 Per Bothner (bothner@rtl.cygnus.com)
3597 * Makefile.in: Make check depend on all.
3598 * Makefile.in (distclean): Remove sysdep.h.
3599 * size.c: Use %u format where appropriate.
3600 * objdump.c: Standardize: L_SET -> SEEK_SET.
3601 * objdump.c: Use new macro bfd_asymbol_bfd.
3602 * configure.in: Allow std-host as the default ${mys_host}.
3604 Thu Dec 17 19:38:19 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3606 * Makefile.in: added dvi target, define and use TEXI2DVI
3608 Tue Dec 15 18:05:07 1992 Per Bothner (bothner@cygnus.com)
3610 * Makefile.in (dist): Fix permissions before release.
3611 * size.c: Use bfd_size_type (and long) where appropriate.
3612 * ar.c: Make writing a map the default, to be compatible
3613 with SYSV and Posix.2. Remove some bogus kludges that
3614 handled __.SYMDEF directly.
3617 Mon Nov 9 13:36:53 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3619 * Makefile.in: flex no longer needs the -S flag
3621 Sat Nov 7 15:06:13 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3623 * ar.c (extract_file): utime needs a pointer to a utimbuf
3625 * Makefile.in: handle -I includes better, adding $(BASEDIR)/bfd to
3626 the list (since some of the bfd/hosts/*.h files include other
3627 files from that directory)
3629 Fri Nov 6 00:12:51 1992 John Gilmore (gnu@cygnus.com)
3631 * i960-pinsn.c (MEM_MAX, MEM_SIZ): Set upper bound properly.
3633 Thu Nov 5 03:37:15 1992 John Gilmore (gnu@cygnus.com)
3635 Clean up some old BFD ansification macros.
3637 * arsup.h, bucomm.h, objdump.h: Remove EXFUN from binutils.
3638 It still remains as a local macro in gmalloc.c, which is derived
3639 from some other copy of GNU Malloc somewhere (FIXME).
3641 * ar.c, objdump.c, size.c: Replace EXFUN with PROTO. Make static
3643 * arsup.h: Declare extract_files.
3645 Mon Nov 2 12:42:11 1992 Ian Lance Taylor (ian@cygnus.com)
3647 * ar.c (extract_file): instead of checking USG: if POSIX_UTIME,
3648 use utime and utimbuf structure, otherwise if USE_UTIME use utime
3649 and array of two longs, otherwise use utimes.
3651 Thu Oct 15 13:57:35 1992 Per Bothner (bothner@cygnus.com)
3653 * binutils.tex: Document yesterday's changes to strip and copy.
3655 Wed Oct 14 13:22:14 1992 Per Bothner (bothner@cygnus.com)
3657 * copy.c: Re-do command-line parsing to use getopt_long().
3658 Add long option names. Re-think option letters to be more
3660 * copy.c: New function filter_symbols() for stripping only
3661 debug-symbols and/or local symbols. Use these to support
3662 the previously-missing options of the old FSF strip.
3664 Tue Oct 13 01:24:20 1992 John Gilmore (gnu@cygnus.com)
3666 * configure.in (host): Use ${srcdir}/../bfd/configure.host rather
3667 than repeating a copy of it here.
3669 Wed Oct 7 12:53:52 1992 Ken Raeburn (raeburn@cygnus.com)
3671 * copy.c (main): Even if is_strip, accept -d argument indicating
3672 alternate output format. Needed by gdb for Nindy.
3674 * m68k-pinsn.c (print_insn_arg): Handle new "`" operand type.
3676 Tue Oct 6 16:33:56 1992 Jeffrey Osier (jeffrey@cygnus.com)
3678 * binutils.texi: added documentation for "copy"
3680 Tue Oct 6 14:22:56 1992 Per Bothner (bothner at PersSony)
3682 * Makefile.in (*clean rules): Some cleaning up.
3683 * Makefile.in (dist): Make diststuff in gprof for a dist.
3685 * ar.c (do_show_version): New function.
3686 * ar.c (main): Fix so "ar -V" works.
3688 Thu Oct 1 22:44:45 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3690 * configure.in: now uses the cpu-vendor-os triple instead of
3693 Fri Sep 25 22:41:08 1992 John Gilmore (gnu@cygnus.com)
3695 * i960-pinsn.c: Change bzero to memset.
3696 * sparc-pinsn.c: Change index to strchr.
3698 Mon Sep 21 14:39:56 1992 Ian Lance Taylor (ian@cygnus.com)
3700 * m68k-pinsn (print_insn_arg, fetch_arg): added support for
3701 operands to memory management instructions, from WRS.
3703 Tue Sep 15 15:26:38 1992 Ian Lance Taylor (ian@cygnus.com)
3705 * Makefile.in (install): if $(tooldir) exists, install nm and
3706 strip in $(tooldir)/bin.
3708 Thu Sep 3 11:57:40 1992 Per Bothner (bothner@rtl.cygnus.com)
3710 * Makefile.in: Let's call it version 2.0.
3712 Wed Sep 2 00:25:13 1992 Per Bothner (bothner@rtl.cygnus.com)
3714 * Makefile.in: Bump to version 0.98.
3715 * TODO, README: Minor updates.
3717 * Makefile.in: Added mostlyclean, distclean rules,
3718 and cleaned up clean, realclean.
3720 Sun Aug 30 21:18:59 1992 Ian Lance Taylor (ian@cygnus.com)
3722 * Makefile.in: map program names through program_transform_name
3725 Sun Aug 30 18:09:03 1992 Per Bothner (bothner@rtl.cygnus.com)
3727 * Makefile.in: Bump to versions 1.97.90.
3728 * cplus-dem.c: Removed. Was nowhere used - and if some
3729 programs are changed to to demangling should now use the
3730 versions in libiberty.
3732 Thu Aug 27 12:58:09 1992 Brendan Kehoe (brendan@cygnus.com)
3734 * configure.in: add we32k
3736 Mon Aug 24 14:53:42 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3738 * ar.c (map_over_members): if the element of the archive has a
3739 null name, fill it in.
3741 * nm.c (do_one_rel_file): only warn if a bfd's flags say there
3742 will be symbols and there aren't any.
3744 Wed Aug 19 11:20:25 1992 Ian Lance Taylor (ian@cygnus.com)
3746 * m68k-pinsn.c: handle new operand type 'r', introduced for cas2.
3748 Tue Aug 18 20:45:48 1992 Rob Savoye (rob@cygnus.com)
3750 * nm.c objdump.c: Added support for a +version (-V)
3751 to print the version number.
3753 * ar.c, copy.c: Added support for a -V option to print
3756 Tue Aug 18 13:28:44 1992 Ian Lance Taylor (ian@cygnus.com)
3758 * config/mh-apollo68v: removed -g from CC definition.
3760 * Makefile.in: always create installation directories.
3762 Mon Aug 17 18:33:41 1992 Per Bothner (bothner@rtl.cygnus.com)
3764 * m68k-pinsn.c: Minor fix in style of output (don't use
3765 range to indicate floating point control registers).
3767 Tue Aug 11 23:42:21 1992 Per Bothner (bothner@cygnus.com)
3769 * ar.c (main): Don't *always* set the verbose flag!
3771 Wed Aug 5 11:25:27 1992 Per Bothner (bothner@rtl.cygnus.com)
3773 * copy.c: When is_strip (because it is invoked as the strip
3774 program), follow traditional argv processing:
3775 'strip file1 file2' now strips file1 and file2, rather
3776 than stripping file1 (as input), leaving output in file2.
3778 Mon Jul 27 16:28:08 1992 Per Bothner (bothner@rtl.cygnus.com)
3780 * objdump.c (display_info, display_info_table): Call
3781 bfd_set_format() on dummy bfd before using it (twice).
3782 * ar.c: Make sure archive is created on command 'r'
3783 even when no elements are inserted. (Clean up and
3784 simplify some non-working related code.)
3786 Mon Jul 20 02:48:38 1992 D. V. Henkel-Wallace (gumby@cygnus.com)
3788 * configure.in: hppa support doesn't assume hp OS (from sef).
3790 Sat Jul 18 14:35:22 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3792 * configure.in: recognize hppa hosts (bsd & hpux), error messages
3793 to stderr, not stdout
3795 Fri Jul 17 18:39:44 1992 K. Richard Pixley (rich@rtl.cygnus.com)
3797 * ar.1, binutils.texi, i960-pinsn.c, nm.1, objdump.1, ranlib.1,
3798 size.1, sparc-pinsn.c, strip.1: removed rcsid's.
3800 Thu Jul 16 16:55:24 1992 K. Richard Pixley (rich@rtl.cygnus.com)
3802 * Makefile.dos: removed rcsid.
3804 Thu Jul 16 08:23:07 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3806 * objdump.c (display_bfd): print state of BFD_IS_RELAXABLE too
3808 Tue Jun 30 20:26:15 1992 D. V. Henkel-Wallace (gumby@cygnus.com)
3810 * Makefile.in: Add program_suffix (parallel to program_prefix)
3812 Thu Jun 25 04:52:45 1992 John Gilmore (gnu at cygnus.com)
3814 * nm.c (sorters): Lint. Remove excess whitespace.
3816 Wed Jun 24 13:48:07 1992 Per Bothner (bothner@cygnus.com)
3818 * nm.c (valueof macro): Add missing parentheses.
3819 (Their lack screwed up numeric_forward().)
3821 Sun Jun 14 10:33:27 1992 John Gilmore (gnu at cygnus.com)
3823 * objdump.c (dump_elf_stabs): Also dump .stab.index and
3824 .stab.excl sections.
3825 (dump_elf_stabs_1): Split out main body of old dump_elf_stabs.
3826 * objdump.1, binutils.texi: Document new sections dumped.
3828 Fri Jun 12 22:23:35 1992 John Gilmore (gnu at cygnus.com)
3830 * size.c, objdump.c, bucomm.c: Lint.
3832 Thu Jun 11 01:19:06 1992 John Gilmore (gnu at cygnus.com)
3834 * objdump.c (dump_elf_stabs): New feature: --stabs prints out a
3835 .stab section from an ELF file. Installed under #ifdef
3836 ELF_STAB_DISPLAY so it can be easily disabled, since it requires
3837 bfd-internals header files and such.
3838 * objdump.1, binutils.texi: Update for --stabs. Also fix
3839 objdump's doc to use -- rather than + for long options.
3840 (FIXME: Not yet fixed everywhere in binutils.texinfo.)
3842 Wed Jun 10 07:53:24 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3844 * objdump.c(display_info), patches from
3845 mohring@informatik.tu-muenchen.de to print the table much more
3848 Thu May 28 13:36:16 1992 Per Bothner (bothner@rtl.cygnus.com)
3850 * objdump.c: Add another enum->int cast, for the sake of
3851 old compilers (such as PCC).
3853 Wed May 27 13:01:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3855 * arlex.l: Don't include <sysdep.h> (unneeded conflicts).
3856 Add declaration of strdup().
3858 Fri May 22 13:40:37 1992 Per Bothner (bothner@cygnus.com)
3860 * Makefile.in: Use srcdir instead of VPATH in ldgram/ldlex
3861 rules, since these are used when building a distribution.
3862 * Makefile.in (arlex.c): Don't re-direct output, since that
3863 leaves a bogus output files if it fails.
3865 * arlex.l: Make work with lex, for what it's worth.
3866 * Makefile.in: Better lex support.
3867 * Makefile.in (dist): Generate flex and bison outputs
3870 Thu May 14 17:17:59 1992 K. Richard Pixley (rich@rtl.cygnus.com)
3872 * Makefile.in: get BISON definition right.
3874 Fri May 8 07:47:08 1992 K. Richard Pixley (rich@cygnus.com)
3876 * sanity.sh: default TMPDIR to ".".
3878 Thu May 7 12:34:50 1992 Roland H. Pesch (pesch@fowanton.cygnus.com)
3880 * binutils.texi: add doc for ar command language.
3882 Wed May 6 18:05:36 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3884 * arparse.y: make END call ar_end
3885 * arsup.c (ar_end): added, deletes temp file if archive session
3889 Wed May 6 11:08:53 1992 K. Richard Pixley (rich@rtl.cygnus.com)
3891 * Makefile.in: use bison & flex from ../ if they exist. Also,
3894 * sanity.sh: remove temporary directory when finished.
3896 Tue May 5 12:00:58 1992 Per Bothner (bothner@rtl.cygnus.com)
3898 * Makefile.in: Bump to version 1.97.
3899 * ar.c: Declare errno for machines that need it.
3901 Mon May 4 23:29:51 1992 John Gilmore (gnu@cygnus.com)
3903 * objdump.c (display_info): Handle error cases without coredump.
3904 Close the dummy temporary file we open in the loop.
3905 * Makefile.in (arsup.o): Add kludge to build with Sun Make.
3907 Fri May 1 16:20:23 1992 K. Richard Pixley (rich@cygnus.com)
3909 * Makefile.in: added test-install target.
3911 * sanity.sh: new file.
3913 * Makefile.in: use sanity test on make check.
3915 Tue Apr 21 13:38:37 1992 K. Richard Pixley (rich@cygnus.com)
3917 * Makefile.in: rework CFLAGS so that they can be passed on the
3918 command line to make. Remove MINUS_G. Default CFLAGS to -g.
3920 Wed Apr 15 14:33:07 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3922 * arsup.c, arsup.h, arparse.y, arlex.l: support for archive
3925 Fri Mar 6 21:54:53 1992 K. Richard Pixley (rich@cygnus.com)
3927 * Makefile.in: added check target.
3929 Thu Mar 5 21:35:49 1992 K. Richard Pixley (rich@cygnus.com)
3931 * Makefile.in: added clean-info target.
3933 Tue Mar 3 15:36:37 1992 K. Richard Pixley (rich@rtl.cygnus.com)
3935 * Makefile.in: remove $(COPY_PROG) from PROGS. It shouldn't be
3936 installed. added tooldir and program_prefix.
3938 Wed Feb 26 18:04:40 1992 K. Richard Pixley (rich@cygnus.com)
3940 * Makefile.in, configure.in: removed traces of namesubdir,
3941 -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
3942 copyrights to '92, changed some from Cygnus to FSF.
3944 Sun Feb 16 12:53:02 1992 Per Bothner (bothner at cygnus.com)
3946 * Makefile.in: Bump version to 1.96, and remove -beta
3947 suffix from distribution name.
3948 * m68k-pinsn.c: New macro COERCE_SIGNED_CHAR to extract
3949 the signed value of a character (even if chars are unsigned).
3950 * sparc-pinsn.c: Add new operand types.
3952 Thu Feb 6 12:14:19 1992 Steve Chamberlain (sac at rtl.cygnus.com)
3954 * objdump.c (disassemble_data): don't print a section's contents
3955 if it's not loadable (eg bss)
3957 Tue Jan 28 11:11:06 1992 Steve Chamberlain (sac at rtl.cygnus.com)
3959 * m68k-pinsn.c (print_insn_arg): fixed so that -ve branch
3960 displacements don't get printed as large +ve ones.
3962 Fri Jan 24 14:47:53 1992 Steve Chamberlain (sac at rtl.cygnus.com)
3964 * copy.c, nm.c, objdump.c, size.c : changed to use the
3968 Mon Dec 30 18:34:41 1991 Per Bothner (bothner at cygnus.com)
3970 * bucomm.c (print_arelt_descr): Tweek the output format
3971 so that 'ar tv' output follows Posix 1003.2/D11.
3972 Output is now also identical to Sun's (except __.SYMDEF).
3974 Mon Dec 30 06:09:53 1991 John Gilmore (gnu at cygnus.com)
3976 * Makefile.in: Make `make' output more readable.
3978 Wed Dec 18 15:04:45 1991 Per Bothner (bothner at cygnus.com)
3980 * Makefile.in: Bump to version 1.94.
3982 Wed Dec 11 16:48:09 1991 Steve Chamberlain (sac at cygnus.com)
3984 * ar.c: added "b" to fopens for dos
3985 * configdj.bat, makefile.dos new files from DJ
3987 Tue Dec 10 04:07:26 1991 K. Richard Pixley (rich at rtl.cygnus.com)
3989 * Makefile.in: infodir belongs in datadir.
3991 Sat Dec 7 17:09:37 1991 Steve Chamberlain (sac at rtl.cygnus.com)
3993 * bucomm.h: created to hold prototypes of bucomm.c
3994 * objdump.h: created to hold prototyes of objdump.c
3995 * am29k-pinsn.c: include objdump.h
3996 * ar.c: include bucomm.h, get ar.h from the right place and
3998 * bucomm.c: defunize bfd_fatal
3999 * copy.c: include bucomm.h, lint.
4000 * i960-pinsn.h: include bucomm.h
4001 * m68k-pinsn.h: lint
4002 * nm.c: include bucomm.h, lint
4004 * sparc-pinsn.c: include objdump.h
4008 Fri Dec 6 23:02:14 1991 K. Richard Pixley (rich at rtl.cygnus.com)
4010 * Makefile.in: added standards.text support. install using
4011 INSTALL_PROGRAM and INSTALL_DATA.
4013 * configure.in: configure now does all of it's work from objdir so
4014 make file existence tests against ${srcdir}.
4016 Thu Dec 5 22:46:22 1991 K. Richard Pixley (rich at rtl.cygnus.com)
4018 * Makefile.in: idestdir and ddestdir go away. Added copyrights
4019 and shift gpl to v2. Added ChangeLog if it didn't exist. docdir
4020 and mandir now keyed off datadir by default.
4022 Wed Dec 4 22:42:03 1991 Per Bothner (bothner at cygnus.com)
4024 * Makefile.in: Bump to version 1.93.
4025 * Makefile.in: Add make-strip.o:maybe-strip.c dependency
4026 for make versions that provide half-baked VPATH-support (e.g. Sun's).
4027 * size.c: Improvements suggested by
4028 "david d [zoo] zuhn" <zoo@aps1.spa.umn.edu>:
4029 - Don't emit (Berkeley) headers if no files were found.
4030 - Return a non-zero return code on failure.
4032 Sat Nov 30 21:34:19 1991 Steve Chamberlain (sac at rtl.cygnus.com)
4034 Changes due to include file renaming:
4035 * am29k-pinsn.c: a29k-opcode.h -> opcode/a29k.h
4036 * sparc-pinsn.c: sparc-opcode.h -> opcode/sparc.h
4037 * m68k-pinsn.c: m68k-opcode.h -> opcode/m68k.h
4038 * nm.c: stab.gnu.h -> aout/stab_gnu.h
4040 Tue Nov 19 19:20:43 1991 Per Bothner (bothner at cygnus.com)
4042 * README: Mention MINIMIZE flag for bfd's make.
4044 Mon Nov 18 12:05:37 1991 Per Bothner (bothner at cygnus.com)
4046 * README: Various improvements.
4048 Sun Nov 17 23:40:59 1991 Per Bothner (bothner at cygnus.com)
4050 * Makefile.in: Bump to version 1.92.
4051 * version.c, Makefile.in: Get version string from Makefile.
4052 * copy.c, is-strip.c, not-strip.c, maybe-strip.c, Makefile.in:
4053 Make the same change that we earlier did for ar/ranlib:
4054 Generate two different binaries for strip and copy and use
4055 a global variable with different values to distinguish
4056 ostrip from copy. (-1 means to use argv[0] to decide,
4057 so you can get the old behavior, but it is no longer the default).
4058 * copy.c (copy_file): Set EXEC_P of output bfd if input is so.
4059 * copy.c (main): If is_strip==-1, compare last 5 chars
4060 of argv[0], not the whole path.
4061 * copy.c (main): Return 0, not 1.
4062 * copy.c (setup_sections): Fix due to change in bfd_make_section
4063 now failing if asked for a duplicate section.
4064 * strip.c, ostrip.c: Removed obsolete files.
4065 * ar.c, not-ranlib.c, maybe-ranlib.c:
4066 Change encoding of is_ranlib variable to be consistent
4067 with is_strip for strip.copy (i.e -1 to means use argv[0]).
4069 Thu Nov 14 20:11:02 1991 Per Bothner (bothner at cygnus.com)
4071 * version.c (program_version): Update to version 1.92.
4073 Tue Nov 12 16:17:53 1991 Per Bothner (bothner at cygnus.com)
4075 * ar.c (get_pos_bfd): Previous fix was missing a "break".
4077 Thu Nov 7 08:55:56 1991 Steve Chamberlain (sac at cygnus.com)
4079 * am29k-pinsn.c: Fixed bug in mtacc, dmac and fmac instruction
4080 encodings. (Thaks to David Wood)
4082 Sun Nov 3 14:50:23 1991 Per Bothner (bothner at cygnus.com)
4084 * Makefile.in ($(DIST_NAME).tar.Z), TODO: Various fixes.
4085 * ar.c (get_pos_bfd): Fix to handling of before/after
4086 positioning options.
4087 * bucomm.c (fatal): MISSING_VFPRINTF is no longer an issue,
4088 since libiberty contains vfprintf etc if otherwise missing.
4089 * m68k-pinsn.c (print_insn_arg): Support BB/BW/BL
4090 type operands, as used by branch instructions.
4091 * nm.c: Delegate printing of symbols to BFD,
4092 by using bfd_print_symbol to do the formatting.
4094 Mon Oct 28 11:20:47 1991 Steve Chamberlain (steve at cygnus.com)
4096 * ar.c (write_archive.c): added unlink before rename since some
4097 systems can't rename onto an existant file.
4099 Mon Oct 21 09:47:23 1991 Steve Chamberlain (steve at rtl.cygnus.com)
4101 * nm.c: now doesn't crash if a symbol with no section and no
4104 Thu Oct 17 15:25:50 1991 Per Bothner (bothner at cygnus.com)
4106 * Makefile.in, version.c: Bump to version 1.91.
4108 Wed Oct 16 11:45:36 1991 Per Bothner (bothner at cygnus.com)
4110 * Makefile.in, ar.c, bucomm.c, copy.c, cplus-dem.c, filemode.c,
4111 i960-pinsn.c, m68k-pinsn.c, nm.c, objdump.c, size.c, sparc-pinsn.c,
4112 * strip.c: Add or update Copyright notice.
4113 * TODO: Add note on 'nm -a'.
4114 * version.c: Update version number to 1.90.
4115 * Makefile.in: Fix making of documentation for dist.
4117 Tue Oct 15 00:17:17 1991 Per Bothner (bothner at cygnus.com)
4120 * Makefile.in: New kludgy rules for making a tarfile.
4121 * Makefile.in: Fix bindir path.
4123 Mon Oct 14 17:34:29 1991 Roland H. Pesch (pesch at cygnus.com)
4125 * Makefile.in: add targets binutils.mm, binutils.me
4127 Fri Oct 11 22:44:21 1991 John Gilmore (gnu at cygnus.com)
4129 * Makefile.in: Avoid Sun Make VPATH bugs by adding dependencies.
4131 Fri Oct 11 12:51:33 1991 Roland H. Pesch (pesch at cygnus.com)
4133 * Makefile.in: add target "binutils.ms"
4135 * binutils.texinfo: minor restructuring for texi2roff comfort.
4137 Fri Oct 11 04:12:28 1991 John Gilmore (gnu at cygnus.com)
4139 Restructure configuration scheme for bfd, binutils, ld.
4141 * include/sys/h-*.h: Move to bfd/hosts/h-*.h.
4142 * configure.in: Revise to symlink sysdep.h to ../bfd/hosts/h-xxx.h.
4143 Change some config names to match other dirs.
4144 * *.c: Include bfd.h before sysdep.h, so ansidecl and PROTO()
4146 * Makefile.in: Use -I. to get sysdep.h.
4148 Wed Oct 9 22:42:56 1991 Per Bothner (bothner at cygnus.com)
4150 * nm.c (print_symbols): Handle NULL name field of symbol.
4151 * Makefile.in: Removed spurious comment.
4153 Tue Oct 8 16:55:03 1991 Roland H. Pesch (pesch at cygnus.com)
4155 * binutils.texinfo: minor typos, phrasing, formatting fixes.
4157 Tue Oct 8 15:13:20 1991 Per Bothner (bothner at cygnus.com)
4159 * configure.in: Get host file from ../bfd/config, not config.
4160 * config/*: Remove config directory and its files.
4162 Tue Oct 8 13:58:59 1991 Roland H. Pesch (pesch at cygnus.com)
4164 * Makefile.in: new targets binutils.dvi, binutils.info
4166 * binutils.texinfo: remove most remaining FIXME's, delete
4167 references to __.SYMDEF by name
4170 Tue Oct 8 10:23:44 1991 Steve Chamberlain (steve at cygnus.com)
4172 * objdump.c (print_address) Print addresses nicely.
4174 Mon Oct 7 11:31:05 1991 Per Bothner (bothner at cygnus.com)
4176 * ar.c, Makefile.in, new files {is,not,maybe}-ranlib.c:
4177 Make two different binaries for ar and ranlib, instead of
4178 distinguishing them at run time using argv[0].
4179 (Old behavior is still available if you "make ar_with_ranlib",
4180 but it is not the default.)
4181 * ranlib.sh (new): An alternative one-line
4182 shell implementation of ranlib.
4184 Fri Oct 4 21:49:44 1991 John Gilmore (gnu at cygnus.com)
4186 * objdump.c: Cope with renames of a few BFD types & enums.
4188 Fri Oct 4 19:08:09 1991 Roland H. Pesch (pesch at cygnus.com)
4190 * binutils.texinfo: add new file (rudimentary docn)
4192 Mon Sep 30 12:30:39 1991 Per Bothner (bothner at cygnus.com)
4194 * config/hmake-news: Add new file (for Sony NEWSOS3).
4195 * bucomm.c (fatal): Conditionally compile fatal() depending on
4196 MISSING_VFPRINTF, and don't confuse the issue with NO_VARARGS.
4197 * objdump.c (dump_headers): Trivial output format change.
4198 * objdump.c (display_info): Loop over integers, not enums,
4199 to appease old compilers.
4201 Mon May 20 16:14:07 1991 Steve Chamberlain (steve at cygint.cygnus.com)
4203 *objdump.c *nm.c *copy.c :hanged some types to work with 64 bit object files
4205 Thu May 16 16:06:55 1991 Steve Chamberlain (steve at cygint.cygnus.com)
4207 * objdump.c (print_address): Make disasembled output more
4208 consistent with gdb and as: Add 0x when printing hex.
4209 Don't print extra leading zeros.
4210 Attempt to not print "filename.o".
4211 * objdump.c: Add some enum-to-int casts to accomodate old compilers.
4214 Fri May 3 22:21:44 1991 John Gilmore (gnu at cygint.cygnus.com)
4216 * copy.c: Change =& constructs to = &, since they confuse older
4224 version-control: never