Changes from binutils-2.5.2 net release:

[deliverable/binutils-gdb.git] / binutils / ChangeLog

Thu Nov  3 19:04:34 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * Makefile.in (install-info): Install info files from whatever
        directory they were found in.

        Patch from DJ Delorie:
        * configure.bat: do c++filt -> cxxfilt right

        * sysinfo.y: Include system header files early, so any potential
        declaration of abort() occurs before its use.

        * strings.c (strings_file): Try opening the file in binary mode
        first.

Wed Nov  2 15:44:13 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>

        * ar.c (main): Treat ar qs like ar rs.

Tue Oct 25 16:19:25 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>

        * objcopy.c (gap_fill): Explicitly initialize, for clarity.
        (pad_to_set, pad_to): New static variables.
        (copy_options): Accept --pad-to.
        (copy_usage): Mention --pad-to.
        (copy_object): Support --pad-to.
        (compare_section_vma): Sort non loadable sections to the front.
        Sort sections with the same VMA by size.
        (copy_main): Handle --pad-to.
        * binutils.texi, objcopy.1: Document --pad-to.

Thu Oct 20 13:51:31 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * objcopy.c (gap_fill_set, gap_fill): New static variables.
        (copy_options): Accept --gap-fill.
        (copy_usage): Mention --gap-fill.
        (copy_object): Support --gap-fill.
        (get_sections, compare_section_vma): New static functions.
        (copy_main): Handle --gap-fill.
        * binutils.texi, objcopy.1: Document --gap-fill.

Wed Oct 19 14:09:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>

        * Makefile.in (check): Add a dummy else clause to the if
        statement.

        * objcopy.c (copy_object): Revert yesterday's change.
        * binutils.texi, objcopy.1: Remove special mention of --set-start
        and `binary' output format.

Tue Oct 18 11:12:01 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>

        * objcopy.c (copy_object): If the output file format is `binary',
        and the start address was not set using --set-start, default the
        start address to zero.  This hack is because the `binary' output
        file format uses the start address to set the virtual address of
        the first byte in the file.
        * binutils.texi, objcopy.1: Add some notes on generating S-records
        and binary files.

        * nm.c (print_symdef_entry): Call print_symname to print the
        symbol name, so that --demangle works.

        * Makefile.in (mostlyclean): Remove tmpdir.

        * objcopy.c (struct section_list): Add fields used, adjust, val.
        (adjust_start, set_start_set, set_start): New static variables.
        (adjust_section_vma, adjust_sections): New static variables.
        (copy_options): Add --adjust-start, --adjust-vma,
        --adjust-section-vma, --adjust-warnings, --no-adjust-warnings,
        --set-start.
        (parse_vma): New static function.
        (copy_usage): Mention new options.
        (copy_object): Handle --set-start and --adjust-start.
        (setup_section): Correct type of last argument to PTR.  Set used
        field if section is removed.  Handle --adjust-vma and
        --adjust-section-vma.
        (copy_section): Correct type of last argument to PTR.
        (mark_symbols_used_in_relocations): Likewise.
        (strip_main): Clear used field when handling -R.
        (copy_main): Handle new options.
        * binutils.texi (objcopy): Document new options.
        * objcopy.1: Document new options.

Fri Oct 14 14:38:13 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>

        * configure.in (configdirs): Remove definition--testsuite is no
        longer configured.
        * Makefile.in (testsuite): Remove target.
        (site.exp): New target.
        (check): Rewrite.
        (clean, distclean): Don't recur into testsuite directory.

Thu Oct 13 19:24:09 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * Makefile.in (VERSION): Updated to 2.5.
        * Version 2.5 released.

Tue Oct 11 15:26:42 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>

        * Makefile.in (sysdump.o): Depends upon sysroff.c.

Mon Oct 10 13:50:30 1994  J.T. Conklin  (jtc@rtl.cygnus.com)

        * nlmconv.c (link_inputs): Pass -Ur flag to ld so that the
          ctor/dtor tables needed by C++ programs are built.

Sun Oct  9 18:04:00 1994  Jim Wilson  (wilson@sphagnum.cygnus.com)

        * Makefile.in (srconv.o): Add dependence on sysroff.c.

Tue Oct  4 12:19:51 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>

        * configure.in: Use ${config_shell} when running config.bfd.

        * Makefile.in (sysroff.h): Split target away from sysroff.c.
        (srconv.o, sysdump.o): New targets.
        (srconv, sysdump): Don't depend upon sysroff.c.

Wed Sep 28 13:04:34 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * Makefile.in (arparse.c): Don't ignore errors from mv.
        (sysinfo.c): Likewise.  Also, depend upon arparse.c, to prevent a
        parallel make from trying to build both arparse.c and sysinfo.c
        simultaneously.
        (nlmheader.c): Similar change.
        (arparse.h): Separate target from arparse.c, so that a parallel
        make does not try to build both at once.  Depend upon arparse.c.
        (sysinfo.h): Similar change.

        * objdump.c (disassemble_data): Pass the reloc buffer to free, not
        the pointer used to loop over the relocs.

Sat Sep 24 16:16:57 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * objdump.c (disassemble_data): Cast result of xmalloc.

Wed Sep 21 19:30:35 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * objdump.c (sorted_syms, sorted_symcount): New global variables.
        (objdump_print_address): Use sorted_syms and sorted_symcount
        instead of syms and symcount.
        (disassemble_data): Don't bother to get the relocs before looping
        over the sections.  Before filtering and sorting the symbol table,
        copy it into sorted_syms.

Fri Sep 16 11:27:39 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * objdump.c (struct objdump_disasm_info): Add field require_sec.
        (objdump_print_address): If aux->require_sec, require that the
        symbol be in aux->sec even if HAS_RELOC is not set.  If we can't
        find a smaller symbol in the right section, look for a larger one.
        (disassemble_data): Set aux.require_sec around the
        objdump_print_address call for the instruction address.

Thu Sep 15 21:43:17 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * ar.c: Call xexit rather than exit.
        (output_filename, output_file, output_bfd): New static variables.
        (remove_output): New static function.
        (main): Call xatexit (remove_output).  Call xexit rather than
        returning.
        (extract_file): Set output_filename and output_file while output
        file is open.
        (write_archive): Likewise, but use output_bfd, not output_file.
        * arsup.c: Include libiberty.h.  Call xexit rather than exit.
        * bucomm.c: Likewise.

        * objdump.c (disassemble_all): New global variable.
        (usage): Document --disassemble-all.
        (long_options): Add disassemble-all as a synonym for -D.
        (compare_symbols): Make pointers const.
        (compare_relocs): New static function.
        (disassemble_data): Rename disassemble to disassemble_fn to avoid
        shadowing.  If dump_reloc_info, print relocs along with
        disassembly.  Skip sections which are not SEC_CODE unless
        disassemble_all or only is set.
        (display_bfd): Don't call dump_relocs if disassemble is set.
        (main): Accept and handle -D.
        * binutils.texi: Document -D/--disassemble-all.
        * objdump.1: Likewise.

Wed Sep 14 12:19:07 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * objdump.c (disassemble_data): Initialize prevline to 0.  Make
        prev_function non const.  Copy functionname into an malloc buffer
        when setting prev_function, instead of assuming that the string
        will last forever.

        * nm.c: Include libiberty.h.
        (sort_by_size): New static variable.
        (long_options): Add --size-sort.
        (usage): Mention --size-sort.
        (numeric_forward): Make static.  Change from void * to PTR.
        (numeric_reverse): Likewise.
        (non_numeric_forward, non_numeric_reverse): Likewise.
        (sorters): Change declaration from void * to PTR.
        (size_forward, sort_symbol_by_size): New static functions.
        (display_rel_file): Handle sort_by_size.
        (filter_symbols): If sort_by_size, discard absolute and undefined
        symbols.
        * binutils.texi (nm): Document --size-sort.
        * nm.1: Document --size-sort.

Tue Sep 13 21:06:06 1994  Jeff Law  (law@snake.cs.utah.edu)

        * objcopy.c (copy_main): Initialize input_filename and
        output_filename to NULL.

Tue Sep 13 14:17:24 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * Makefile.in (version.o): Depend upon Makefile, so that version.o
        gets rebuilt when make variable VERSION is changed.

        * objdump.c (dump_section_header): Print the SEC_NEVER_LOAD flag.

Wed Aug 24 12:40:09 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * configure.in: Change i[34]86 to i[345]86.

Tue Aug 23 11:00:40 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * ar.c (ranlib_touch): Don't update the archive map if there isn't
        one.

Mon Aug 22 16:02:18 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * ar.c: Include libiberty.h.
        (inarch): Remove variable.
        (map_over_members): Make static.  Add arch argument, and use it
        instead of inarch.  Change all callers.
        (main): Treat --version as -v.  Accept -t argument.  Accept any
        number of archive arguments.  Catch and use open_inarch return
        value, rather than using inarch.
        (open_inarch): Return newly opened BFD, rather than using inarch.
        (do_quick_append): Make archive_filename const.
        (write_archive): Add iarch argument, and use it instead of inarch.
        Change all callers.
        (delete_members, move_members, replace_members): Likewise.
        (ranlib_only): Don't exit on success.  Catch and use open_inarch
        return value.
        (ranlib_touch): New function.
        * arsup.h (map_over_members): Don't declare.
        (ar_end, ar_extract): Declare.
        (open_inarch): Change return value in declaration to bfd *.
        * arsup.c (map_over_list): Make static. Always pass two arguments
        to function.  Add arch argument, and use it instead of inarch.
        Change all callers.
        (ar_directory_doer): Make static.  Add ignored second argument.
        Change all callers.
        (ar_directory): Use open_inarch return value rather than inarch.
        (ar_addlib_doer): Make static.
        (ar_addlib): Use open_inarch return value rather than inarch.
        (ar_extract): Remove unused local variable abfd.

Thu Aug 11 14:55:57 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        Add support for removing named sections to objcopy and strip.
        * objcopy.c (struct section_list): Define.
        (remove_sections): New static variable.
        (strip_options, copy_options): Add remove-section.
        (copy_usage, strip_usage): Mention -R and --remove-section.
        (setup_section): If section is in remove_sections list, ignore it.
        (copy_section): Likewise.
        (strip_main, copy_main): Handle -R.
        * binutils.texi, objcopy.1, strip.1: Document new options.

Wed Aug 10 10:19:55 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * nlmconv.c (powerpc_mangle_relocs): Rename symvalue to sym_value,
        so as not to conflict with the symvalue typedef in bfd.h.

Mon Aug  1 13:19:09 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * nlmheader.y: Per current NetWare docs, accept a revision number
        of 0 and treat a revision number greater than 26 as 0.

Mon Jul 25 12:58:36 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * objdump.c (objdump_print_address): Correct handling of end of
        symbols when looking for next symbol with a different value.

Fri Jul 22 16:48:34 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * nm.c (numeric_forward): Treat undefined symbols as "less than"
        defined symbols with zero values.  If numeric values are equal, or
        both symbols are undefined, sort alphabetically.  Don't assume
        that the difference of two bfd_vma values will truncate to "int"
        and still have the same sign.
        (numeric_reverse): Call numeric_forward and negate the result.
        (print_symbol_info_bsd): For undefined symbols, print leading
        spaces equivalent to the width of a printed bfd_vma, rather than
        assuming that 8 will look right.

Fri Jul 22 10:36:50 1994  Steve Chamberlain  (sac@jonny.cygnus.com)

        * coffgrok.c (doit):  Zero all fields of new structure. 
        * srconv.c (sysroff_swap_*_out): Remove redundant trailing arg. 
        * sysinfo.y: Generate sysroff_swap_*_out without requiring extra
        arg.

Fri Jul 22 10:09:53 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)

        * nlmheader.y: Make "stack" and "stacksize" synonyms in the lexer
          rather than the parser.

Thu Jul 21 10:25:09 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * config/mh-alphaosf, config/mh-apollo68v, config/mh-delta88:
        Remove; obsolete.

Sat Jul 16 22:34:39 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * objdump.c (slurp_dynamic_symtab): Try to get the dynamic symbols
        even if the bfd is not marked DYNAMIC.  ELF executables are not
        marked DYNAMIC, but do have dynamic symbols.

Fri Jul 15 01:41:35 1994  Steve Chamberlain  (sac@jonny.cygnus.com)

        * coffgrok.c (do_where): Make data with no type 'int'.
        (do_define):  Keep info on source file of a symbol.
        * coffgrok.h (coff_symbol): New field.
        * srconv.c (PROGRAM_VERSION): Now 1.3
        (wr_rl): Use external ref number for symbol.
        (wr_dus): Only keep one source file per debug unit.
        (wr_dln): Always emit line numbers for first source file,
        (wr_globals):  Emit globals in the du of their owning source file.

Mon Jul 11 15:59:03 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)

        * nlmheader.y: Null terminate var_hdr->threadName.

Fri Jul  8 17:33:22 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * Makefile.in (syslex.o, sysinfo.o): Permit C source files to be
        in $(srcdir), as they will be for FSF releases.

Wed Jul  6 01:13:14 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * nlmconv.c (setup_sections): Preserve existing section flags when
        copying in flags from a new section.

Tue Jul  5 15:56:01 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * objcopy.c: Include libiberty.h.
        (copy_file): If output_target is NULL, set it to the target of the
        input file.

Wed Jun 29 17:17:14 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)

        * nlmconv.c (link_inputs): Fixed memory allocation bug.

Thu Jun 23 12:52:46 1994  David J. Mackenzie  (djm@rtl.cygnus.com)

        * configure.in: Change --with-targets to --enable-targets.

Tue Jun 21 12:53:21 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * Makefile.in (sysinfo): Does not depend upon $(ADDL_LIBS).

        * nlmconv.c (powerpc_build_stubs): Don't generate the PowerPC
        NetWare custom header; no longer needed.
        (powerpc_mangle_relocs): Convert relocs against the uninitialized
        data section into relocs against the data section.

        * configure.in: Set nlmconv_defs to -DNLMCONV_cputype for all the
        netware targets.  Write it into Makefile as NLMCONV_DEFS.
        * Makefile.in (nlmconv.o): Pass $(NLMCONV_DEFS) to $(CC).
        * nlmconv.c: Only compile code for specific CPU types if
        NLMCONV_cputype is defined.

        * nlmconv.c (main): Change uses of bfd_abs_section, etc., to use
        bfd_abs_section_ptr or bfd_is_abs_section, etc.
        (i386_mangle_relocs, alpha_mangle_relocs): Likewise.
        (powerpc_build_stubs): Likewise.
        * nm.c (filter_symbols, print_symbols): Likewise.
        * objcopy.c (filter_symbols): Likewise.
        (mark_symbols_used_in_relocations): Likewise.
        * objdump.c (remove_useless_symbols, dump_relocs): Likewise.
        * size.c (sysv_internal_printer): Likewise.

Mon Jun 20 16:43:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * Makefile.in (MANPAGES): Remove $(DEMANGLER_PROG).
        (install): Install it explicitly, from build dir, not srcdir.

Mon Jun 20 16:29:54 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * objdump.c: Don't include elf/internal.h.
        (bfd_elf_find_section): Don't declare.
        (read_section_stabs): No special handling for ELF.  Always read
        using BFD sections.

Thu Jun 16 17:25:20 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * configure.in: Set UNDERSCORE in Makefile based on result of
        invoking config.bfd with a second argument of ``_''.
        * Makefile.in (underscore.c): Depend upon Makefile.  Don't try to
        run $(CC) and $(NM), just use $(UNDERSCORE).  Create via temporary
        file.
        (demangle.o): Remove target.
        ($(NM_PROG)): Don't depend upon demangle.o, and don't link against
        demangle.o.  It's in libiberty anyhow.
        (cplus-dem.o): Don't depend upon demangle.o.
        * binutils.texi: Mention -n and --no-strip-underscores arguments
        to c++filt.

Wed Jun 15 12:10:31 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * nm.c (long_options): Add --no-demangle to turn off --demangle,
        and --no-cplus for Linux compatibility.
        (usage): Mention --no-demangle.
        * binutils.texi: Document --no-demangle.

Fri Jun 10 15:41:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * nm.c: HOST_64_BIT was renamed to BFD_HOST_64_BIT.

        * objcopy.c (copy_archive): Make the temporary directory in the
        same directory as the output BFD, since we may not have write
        permission on the current directory.  Set the permissions of the
        new directory to 0700, not 0777.

Mon Jun  6 21:36:43 1994  D. V. Henkel-Wallace  (gumby@cygnus.com)

        * configure.in: if this is an rs6000 (and we're not building for
        any other bfd targets) then build only nm (collect needs it on
        rs6000-lynx).

        * Makefile.in: define TOOL_PROGS which the list of programes to
        install in $tooldir -- replaces a hard-coded list.

Fri Jun  3 10:59:18 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * objdump.c (display_target_list): Remove unused local ok.

Thu May 26 18:05:52 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * config/mh-alphaosf (CFLAGS): Don't specify both -g and -O;
        they're not compatible under native cc.  Use -O1 instead.

        * Makefile.in (VERSION): Updated to cygnus-2.4.1.

        Changes from binutils-2.4 net release:

        * Makefile.in (MANPAGES): Use $(DEMANGLER_PROG).
        ($(DEMANGLER_PROG).1): Build from cxxfilt.man, using sed.
        * cxxfilt.man: Renamed from c++filt.1, replaced "c++filt" with
        magic token to be replaced by sed.

        Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)

        * configure.bat: update for latest makefile.in

Fri May 13 23:25:13 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * bucomm.c: Check ANSI_PROTOTYPES rather than __STDC__.

Tue May 10 18:22:06 1994  Jason Molenda    (crash@sendai.cygnus.com)

        * objcopy.c (copy_section): Set section size correctly if using
        interleave.

Sat May  7 16:49:36 1994  Steve Chamberlain  (sac@cygnus.com)

        * Makefile.in: Add rule for sysinfo.h

Fri May  6 12:18:33 1994  Steve Chamberlain  (sac@cygnus.com)

        * Makefile.in (SRCONV_PROG): Define.
        (PROGS): Use $(SRCONV_PROG) too.

Thu May  5 19:41:43 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * Makefile.in (DISTSTUFF): Add sysinfo.c, syslex.c, in case
        someone configures with `targets=all'.
        (distclean): Remove y.*.
        (syslex.o): Depend on sysinfo.h.
        (sysinfo.c): Rename y.tab.h to sysinfo.h.
        (install-info): Don't try to install into $(infodir)/$(srcdir).
        * syslex.l: Include sysinfo.h, not y.tab.h.

Thu May  5 11:50:55 1994  Ken Raeburn  (raeburn@kr-pc.cygnus.com)

        * syslex.l (yywrap): Define as function if not defined as a macro.

        * Makefile.in (objdump.o): Deleted special rule.
        * configure.in: Don't bother building ARCHDEFS variable for
        Makefile.
        * objdump.c (ARCH_*): Deleted handling.
        (disassemble_data): Call `disassembler' from opcodes library.

Thu May  5 13:28:42 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * Makefile.in (install): Correct handling of $(tooldir) and
        $(bindir) being on different devices.

Fri Apr 29 09:50:38 1994  Steve Chamberlain  (sac@cygnus.com)

        * sysdump.c (h8300, sh): Add declarations.

Wed Apr 27 11:25:18 1994  Steve Chamberlain  (sac@cygnus.com)

        * Makefile.in (syslex, sysinfo): Use CC_FOR_BUILD.
        * coffdump.c, coffgroc.c, coffgrog.h, srconv.c, sysdump.c,
        sysroff.info: Major changes.

Tue Apr 26 18:18:24 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * objdump.c (print_section_stabs): Indicate the stab header symbol
        more clearly, print numbers of unrecognized stab n_type values.

Tue Apr 26 16:22:55 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * nlmconv.c (copy_sections): Copy arelent pointers, not arelents.

Mon Apr 25 16:14:32 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * Makefile.in (distclean): Remove $(PROGS) and underscore.c.

Fri Apr 22 11:14:19 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * nlmconv.c (setup_sections): Remove special handling of .reginfo
        section.
        (copy_sections): Likewise.
        (alpha_mangle_relocs): Use bfd_ecoff_get_gp_value rather than the
        special ECOFF .reginfo section.

        * objcopy.c (copy_object): Call bfd_copy_private_bfd_data after
        copying everything else, to let it fiddle with the file in its
        final state.

        * objdump.c: Include libiberty.h.
        (display_target_list): If a format fails, just go on to the next
        one.  Check return value of bfd_set_format.
        (display_info_table): Likewise.  Don't increment loop variable in
        for loop test, since that skips the first element.
        (display_target_tables): Rewrite loop for clarity.  Ensure that it
        always prints at least one element.

        * nlmconv.c (main): Use CyGnUsEx rather than CyGnUsSeCs for
        sections header.  Rename from cygnus_sections to cygnus_ext.

Thu Apr 21 12:12:26 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * objdump.c (_DUMMY_NAME_): Don't define.
        (display_target_list): Use tmpnam to get a file name rather than
        using _DUMMY_NAME_.  Unlink it when done.
        (display_info_table): Likewise.

        * nlmconv.c (secsec): New static variable.
        (main): Create .nlmsections section in output BFD.  Store
        information about it in sections header.
        (setup_sections): Allocate space in sections header.
        (copy_sections): Copy zero sized sections.  Put information about
        each section in the sections header.

Wed Apr 20 14:34:51 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * nlmconv.c (powerpc_build_stubs): Take new outbfd argument.
        Change caller.  Create custom header for new PowerPC NetWare
        format.

        * Makefile.in (nlmheader.o, nlmconv.o): Update dependencies.
        * nlmconv.c: Include bfd.h and libiberty.h with "", not <>.
        * nlmheader.y: Include bfd.h with "", not <>.

Wed Apr 13 10:52:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * objdump.c: Do an ifdef on __GO32__, not unix.

Wed Apr  6 21:54:49 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        Added -D (--dynamic) option to nm and -T (--dynamic-syms) and -R
        (--dynamic-reloc) arguments to objdump.
        * nm.c (dynamic): New static variable.
        (long_options): Added "dynamic".
        (usage): Mention -D and --dynamic.
        (main): Add D to getopt string.  Handle -D by setting dynamic.
        (display_rel_file): If dynamic is non-zero, read dynamic symbols
        rather than normal symbols.
        * nm.1: Updated for -D (--dynamic) option.
        * objdump.c (dump_dynamic_symtab): New global variable.
        (dump_dynamic_reloc_info): New global variable.
        (dynsyms, dynsymcount): New global variables.
        (usage): Mention -R, -T, --dynamic-syms and --dynamic-reloc.
        (long_options): Added "dynamic-reloc" and "dynamic-syms".
        (slurp_symtab): If no symbols, return rather than exit.
        (slurp_dynamic_symtab): New function.
        (display_bfd): Handle dump_dynamic_symtab and
        dump_dynamic_reloc_info.
        (dump_symbols): Take new dynamic argument, indicating whether to
        display dynamic symbols.
        (dump_relocs): Move most printing into dump_reloc_set.
        (dump_dynamic_relocs): New function.
        (dump_reloc_set): New function, extracted from dump_relocs.
        (main): Add R and T to getopt string.  Handle -T by setting
        dump_dynamic_symtab and -R by setting dump_dynamic_reloc_info.
        * objdump.1: Updated for -R (--dynamic-reloc) and -T
        (--dynamic-syms) options.
        * binutils.texi: Updated for new nm and objdump options.

Wed Mar 30 15:52:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        Update for recent BFD changes to symbol and reloc reading.  Rename
        all uses of get_symtab_upper_bound to bfd_get_symtab_upper_bound.
        Also:
        * coffgrok.c (symcount): Change to long.
        (do_sections_p1): Check for error return from
        bfd_get_reloc_upper_bound.  Change relcount to long, and check for
        error from bfd_canonicalize_reloc.
        (coff_grok): Change storage to long.  Check for error from
        bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
        * nlmconv.c (main): Change symcount, newsymalloc, newsymcount, and
        i to long.  Check for error from bfd_get_symtab_upper_bound and
        bfd_canonicalize_symtab.
        (copy_sections): Change reloc_size and reloc_count to long.  Check
        for error from bfd_get_reloc_upper_bound and
        bfd_canonicalize_reloc.
        (mangle_relocs, i386_mangle_relocs, alpha_mangle_relocs): Change
        reloc_count_ptr argument to long *.  Make corresponding changes to
        variables loaded from *reloc_count_ptr.
        * nm.c (display_rel_file): Change storage and symcount to long.
        Check for errors from bfd_get_symtab_upper_bound and
        bfd_canonicalize_symtab.
        * objcopy.c (filter_symbols): Change symcount, src_count and
        dst_count to long.
        (copy_object): Change symcount to long.  Pass another argument to
        fprintf.  Check for errors from bfd_get_symtab_upper_bound and
        bfd_canonicalize_symtab.
        (copy_section): Change relcount to long.  Check for errors from
        bfd_get_reloc_upper_bound and bfd_canonicalize_reloc.
        (mark_symbols_used_in_relocations): Change relcount and i to long.
        Check for errors form bfd_get_reloc_upper_bound and
        bfd_canonicalize_reloc.
        * objdump.c (storage): Remove global variable.
        (symcount): Changed to long.
        (slurp_symtab): New local variable storage.  Check for errors from
        bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
        (remove_useless_symbols): Change return value and count to long.
        (objdump_print_address): Change min, max, thisplace and i to long.
        (disassemble_data): Change i to long.
        (dump_symbols): Change count to long.
        (dump_relocs): Change relcount to long.  Check for errors from
        bfd_ret_reloc_upper_bound and bfd_canonicalize_reloc.
        (display_info_table): Add casts when passing LONGEST_ARCH for
        printf %* argument.

Tue Mar 29 14:59:04 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * nm.c (display_archive): Close each archive element after it has
        been displayed.
        * objdump.c (display_file): Likewise.

Mon Mar 28 13:04:08 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * configure.in: Change error message to refer to bfd/config.bfd
        rather than bfd/configure.in.

Sun Mar 27 16:23:39 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * More fixes for object formats which allow multiple sections
        with the same name:
        * objcopy.c (setup_section): Make a new output section even if
        one already exists with the given name.
        (copy_section): Use isection->output_section rather than trying
        to look the output section up by its (possibly non-unique) name.

        * Makefile.in (install-info): Look for binutils.info in the
        current directory, then in $(srcdir).  Don't use $<.

Mon Mar 21 12:55:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * objdump.c (objdump_print_address): Make static.  Declare with
        prototype.  Change vardiff from int to bfd_signed_vma.  Correct
        binary search termination condition.  When looking for same
        section symbol in relocatable file, handle final symbol correctly.

Sun Mar 20 11:26:36 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * Makefile.in: Avoid bug in hpux sed.

        * objcopy.c: Changes to keep it from stripping symbols used
        in output relocations.
        (mark_symbols_used_in_relocations): New function.  Mark symbols
        used in output relocations with BSF_KEEP.
        (filter_symbols): Do not strip symbols marked with BSF_KEEP.
        (copy_object): Reorder actions.  First setup sections, then
        build the output symbol table, then copy the section contents.

Fri Mar 18 10:53:55 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * ar.c (write_archive): Allocate space for the null byte.  From
        Robert Lipe <robertl@arnet.com>.

Thu Mar 17 16:20:28 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * Makefile.in: Built nm.new and strip.new to avoid problems with
        collect when . is in PATH.
        (STRIP_PROG): Change from strip to strip.new.
        (NM_PROG): Change from nm to nm.new.
        (install): Remove the .new when installing.

Wed Mar 16 16:27:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * nlmconv.c (powerpc_build_stubs): Set BSF_DYNAMIC flag for each
        symbol for which we build a stub.
        (powerpc_mangle_relocs): Only reset TOC pointer for a call to a
        symbol with BSF_DYNAMIC flag set.

Tue Mar 15 23:04:13 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * objcopy.c (filter_symbols): Use bfd_is_local_label to determine
        if a symbol represents a compiler-generated local label.
        (copy_object): Give the BFD backends a chance to copy any private
        bfd data from the input BFD to the output BFD.
        (setup_section): Give the BFD backends a chance to copy any private
        section data from the input section to the output section.

Mon Mar 14 11:15:58 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * objcopy.c (mangle_section): Delete unused function.
        (setup_section): Set osection here instead of calling
        mangle section to do it.

Mon Mar 14 12:11:01 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * ar.c (write_archive): Close inarch before unlinking it.

Fri Mar 11 22:20:48 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * nlmconv.c (main): For PowerPC, call powerpc_build_stubs and
        powerpc_resolve_stubs.  Use __GOT0, not __toc_start.  Handle it if
        the start and end symbols are not in the text section.
        (struct powerpc_stub): New struct definition.
        (powerpc_stubs, powerpc_stub_insns): New static variables.
        (powerpc_initial_got_size): New static variable.
        (powerpc_build_stubs): New function.
        (powerpc_resolve_stubs): New function.
        (powerpc_mangle_relocs): Clear extraneous data in .got section.
        Rearrange reloc handling to handle ELF relocs that are not
        partial_inplace.  Resolve PC relative relocs.

Wed Mar  9 13:48:11 1994  Steve Chamberlain  (sac@jonny.cygnus.com)

        * ar.c (move_members): Fix it so that the abi positional modifiers
        don't delete all archive members following the insert point.

Tue Mar  8 13:14:43 1994  Steve Chamberlain  (sac@jonny.cygnus.com)

        * coffgrok.[ch]: New files, understand coff objects.
        * coffdump.c: Uses coffgrok to dump out the debug info of a coff
        file.
        * sysroff.info: Description of a SYSROFF object file.
        * sysinfo.y, syslex.l: Parse info file, generate a reader, writer,
        header files and a printer.
        * srconv.c: Uses coffgrok.c and sysroff.info to convert a coff
        file to a SYSROFF file.

Sat Feb 26 13:35:26 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * ar.c (do_quick_append): Pad with a genuine character 10,
        rather than whatever '\n' might happen to be.

Tue Feb 22 18:25:52 1994  Ian Lance Taylor  (ian@cygnus.com)

        * nlmconv.c (main): Ignore debugging symbols when looking for
        special symbols by name.

Sun Feb 20 18:47:42 1994  Ian Lance Taylor  (ian@lisa.cygnus.com)

        * nlmconv.c: Include libiberty.h.

        Support for PowerPC NetWare.
        * nlmconv.c (main): For PowerPC NetWare, automatically define the
        special symbols __toc_start.
        (select_output_format): Handle bfd_arch_powerpc.
        (mangle_relocs): Likewise.
        (powerpc_mangle_relocs): New function.

Thu Feb 17 09:28:23 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

        * ar.c, bucomm.c, nlmconv.c, nm.c, objcopy.c, objdump.c, 
        size.c: Use bfd_get_error and bfd_set_error and new error names.

Fri Feb 11 15:54:51 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

        * objcopy.c (strip_main, copy_main): Add missing 'break' in switch.

Mon Feb  7 19:45:52 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * objdump.c (disassemble_data): Handle bfd_arch_powerpc.

Sun Feb  6 22:08:20 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

        * strings.c objdump.c nlmconv.c objcopy.c nm.c ar.c size.c (main):
        Call xmalloc_set_program_name.

Fri Feb  4 10:46:01 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

        * objcopy.c (filter_bytes): Make MEMHUNK a char *, not PTR, so we
        can do arithmetic on it.

Thu Feb  3 14:06:41 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

        * objdump.c (dump_section_stabs, read_section_stabs,
        print_section_stabs): Functions broken out of dump_stabs_1.
        Free the stabs and strings when done with them.

Wed Feb  2 13:42:23 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

        * nlmconv.c (main): Use bfd_get_flavour instead of struct member.
        * ar.c (print_contents, extract_file), size.c
        (print_berkeley_format, print_sysv_format): Use bfd_get_filename and 
        bfd_my_archive instead of dereferencing the structs directly.

        * ar.c: Use bfd_fatal and bfd_nonfatal instead of bfd_perror and exit.
        Indent.  Remove DEFUNs.

        * nlmconv.c (main), objcopy.c (copy_file): Print matching formats
        if ambiguous match.
        * nm.c (display_file, display_archive), size.c (display_bfd):
        Eliminate gotos.
        Print matching formats if there is an ambiguous match.  Use
        bfd_nonfatal instead of hardcoded error message if nothing matches.

        * arsup.c, ar.c, objdump.c: Use bfd_get_filename instead of
        abfd->filename. 

        * nm.c (display_archive): New function, from code in display_file.
        (display_rel_file): Renamed from do_one_rel_file.

        * size.c: Indent.
        (display_archive): New function from code in display_file.
        (display_file): Check bfd_close error return.

        * strings.c (strings_object_file): Check bfd_check_format
        error return.

        * strings.c, objdump.c, size.c: Use bfd_nonfatal instead of bfd_perror.

        * bucomm.c: Delete references to exit_handler.  It wasn't set
        anywhere, and now that we're using the libiberty xmalloc, it
        wouldn't always get called before exiting.
        (list_matching_formats): Function moved from objdump.c.
        * bucomm.h: Declare it.

        * objdump.c (disassemble_data): Move some variable decls closer to
        their use.  Add some comments.  Replace a nested block with a
        return. 

Mon Jan 31 18:50:41 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * objdump.c (display_target_list, display_info_table): Check that
        the bfd of the dummy output file is not null.

Wed Jan 26 13:13:18 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

        * objcopy.c (filter_bytes): New function.
        (copy_section): Call it.
        (copy_options, copy_usage, copy_main): Add --byte option to
        activate it.  Appropriate the -b option (which was an undocumented
        synonym for -F) for it, also.  Add --interleave, -i option for
        additional control.
        (setup_section, copy_section, mangle_section): Renamed with no `s'
        on the end.
        * objcopy.1, binutils.texi: Document the new options.

        * objdump.c (display_target_tables, display_target_list):
        New functions broken out of display_info.
        Eliminate some magic constants.  Use more meaningful variable names.
        (dump_bfd_header): New function broken out of display_bfd.
        (dump_section_header): New function broken out of dump_headers.
        (remove_useless_symbols): Don't shadow global variable name with
        parameter. 
        (objdump_print_address): Fix backward test.

Tue Jan 25 19:40:54 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * bucomm.c (print_arelt_descr): Change decl of `when' to time_t.
        * objdump.h: Removed.

Mon Jan 24 13:29:02 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

        * objdump.c (display_file): Remove call to list_matching_formats.
        It would never be called.
        (list_matching_formats): Take an arg giving the list of matching
        formats.
        (display_bfd): Pass the arg, and get it filled in by calling
        bfd_check_format_matches instead of bfd_check_format.
        (display_info, display_info_table): target_vector was renamed to
        bfd_target_vector. 

        * binutils.texi (objdump): Note some limitations of -h section
        address printing.

Sat Jan 22 16:20:46 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * Makefile.in (MALLOC): Set to emptiness by default.
        (ALL_CFLAGS): Add and use.
        (arparse.h): Make it depend on arparse.y.
        * ar.c (libbfd.h): Don't require to be in ../bfd.
        * objdump.c (comp): Rename to compare_symbols.

Fri Jan 21 20:22:30 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

        * objdump.c (list_matching_formats): If the file format is ambiguous,
        print the matching names so the user can choose one.
        (display_bfd): Call it.
        (display_file): Call it.

Fri Jan 21 19:17:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * objdump.c (disassemble_data): Support bfd_arch_rs6000.

Mon Jan 17 13:57:25 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * objdump.c (stab_name): Allocate dynamically.
        (stab_print): Use pointers to strings instead of char arrays.
        (dump_stabs): Change alloc and init of arrays appropriately.    
        (dump_stabs_1): Always decide whether to print stab_name or
        the stab's type number, if unnamed.

Fri Jan 14 14:42:48 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * objcopy.c (strip_main, copy_main): Don't clobber the input file
        if copy_file fails.

        * nlmconv.c (main): Warn about an attempt to use a shared library
        with uninitialized data.

        * nlmconv.c (setup_sections): Make sure that we align the
        output_offset of each input section appropriately.

Thu Jan 13 17:32:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * objdump.c (dump_relocs): Don't crash if section name is NULL.

Tue Jan 11 19:46:33 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * filemode.c (filemodestring): Commented out; not used.
        (mode_string): Use POSIX definitions.
        (ftypelet): Likewise.
        (rwx): Removed; no longer used.
        * bucomm.c: Include bucomm.h.
        (bfd_nonfatal, bfd_fatal): Argument is const.
        (fatal): Make __STDC__ version.
        * bucomm.h (mode_string): Declare.
        * Makefile.in (bucomm.o): Depend upon bucomm.h

Sun Jan  9 12:03:20 1994  Ken Raeburn  (raeburn@rtl.cygnus.com)

        * bucomm.c (xmalloc, xrealloc): Deleted.
        * bucomm.h (xmalloc, xrealloc): Fix prototypes, to correspond to
        libiberty version of functions.

Thu Jan  6 06:18:15 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

        * binutils.texi: Add a chapter summarizing the ways to select
        aspects of the target for each program.

        * objdump.c (long_options, usage): Add long equivalents for all
        remaining short options that lacked them.
        * binutils.texi objdump.1: Document them.

        * size.c (usage): Tweak usage message.
        * size.1: Add missing `=' in examples.

        * binutils.texi strip.1 objcopy.1 nlmconv.1 objcopy.c nlmconv.c:
        Use "--target=bfdname" as the option to select the BFD target,
        like nm and size already do.
        Reserve "--format=format" for textual output selection options, but
        for now keep old option names as obsolete for backward compatibility.

        * strings.c (main, strings_object_file, usage): Add --target option.
        * binutils.texi strings.1: Document it.

Sat Jan  1 13:58:24 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

        * ar.c (main): Add \n in error message.

Thu Dec 23 12:23:11 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        gcc -Wall lint:
        * ar.c (main): Put parens around assignment used as truth value.
        * objcopy.c (strip_main): Remove unused variables.  Return 0.
        (copy_main): Remove unused variables.  Return 0.
        * objdump.c (display_bfd): Declare return value as void.
        (stab_print): Use "" instead of 0 to initialize array.
        (dump_stabs_1): Print vma using printf_vma.
        (display_info): Put parens around assignment used as truth value.
        * strings.c (print_strings): Cast printf arguments.

        * objcopy.c (copy_main): Use copy_options, not strip_options.

        * nlmheader.y (command): Warn about illegal date values.

Wed Dec 15 11:18:03 1993  David J. MacKenzie  (djm@frosty.eng.umd.edu)

        * bucomm.c bucomm.h: Run through indent.  De-ansidecl-ify.
        (bfd_nonfatal): New function.
        (bfd_fatal): Call it.

        * objcopy.c (smart_rename): Do a copy if the dest file has
        multiple hard links.  Remove source file on successful copy.
        Try to preserve mode and owner on successful rename.

        * objcopy.c: Run through indent.  Clean up a bit.
        Make global variables static.
        Make {input,output}_{target,filename}, show_version local
        to various functions.
        New global variable `status' for exit status.
        (strip_main, copy_main): New functions with code from main.
        (nonfatal): New macro.  Use it globally instead of bfd_perror and
        bfd_fatal.

        (copy_object): Call mangle_sections with bfd_map_over_sections.
        (mangle_sections): Adjust for new calling convention.

Fri Dec 10 11:28:11 1993  Ian Lance Taylor  (ian@deneb.cygnus.com)

        * nlmheader.y (command): Accept MAP and FULLMAP without arguments.
        * nlmconv.c (main): Change error message for MAP and FULLMAP.

Thu Dec  9 17:47:19 1993  Ian Lance Taylor  (ian@deneb.cygnus.com)

        * nlmconv.c (main): Warn about imported symbols that are not in
        the IMPORT list even if the IMPORT keyword is not used.

        * nlmconv.c (debug, unlink_on_exit): New static variables.
        (long_options): Add "debug" and "linker".
        (main): Handle -d and -l arguments.  Make command line input and
        output files optional.  Parse the command file before opening the
        BFD's, which requires storing more information in local variables.
        If INPUT names multiple files, link them together.  Use OUTPUT for
        the output file name if not named on command line.
        (show_usage): Changed for new options.
        (link_inputs): New function to automatically invoke linker to
        handle multiple INPUT files.
        (choose_temp_base_try, choose_temp_base, pexecute): New functions,
        mostly copied from gcc/gcc.c.
        * nlmconv.h (input_files, output_file): Declare.
        * nlmheader.y (input_files, output_file): Define.
        (command): Support INPUT with a string_list argument.  Support
        OUTPUT.
        (string_list): Renamed from module_list.
        * Makefile.in (nlmconv.o): Define LD_NAME based on
        program_transform_name.

Wed Dec  8 10:09:04 1993  Ian Lance Taylor  (ian@deneb.cygnus.com)

        * nlmheader.y (nlmheader_identify): New function.  Use it to print
        the program name just once, instead of with every error message.

Mon Dec  6 16:11:32 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * nlmconv.c (long_options): Changed --header-info to --header-file
        to match documentation and usage message.

Sun Dec  5 01:31:01 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * objdump.c (dump_relocs): Avoid dereferencing a NULL sym_ptr_ptr
        in a relocation.

Thu Dec  2 16:00:06 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * nlmconv.c (main): Change various types from bfd_size_type to
        size_t, since they have to be arguments to fread and fwrite.
        Change set from char * to unsigned char *.
        (select_output_format): Make mach argument unsigned.  Handle
        bfd_arch_alpha.
        (setup_sections): Don't copy the .reginfo section of an ECOFF
        file.  Call bfd_set_reloc to initialize the relocation fields.
        (copy_sections): Don't copy the .reginfo section of an ECOFF file.
        Combine all relocs for a section.
        (mangle_relocs): Change type of relocs to permit specific
        functions to change it.  Call alpha_mangle_relocs for alpha,
        default_mangle_relocs for other architectures.
        (default_mangle_relocs): New function.  Adjust the address of all
        relocs by the output_offset.
        (i386_mangle_relocs): Change type of relocs argument.  Cast length
        argument to memmove to size_t.
        (alpha_mangle_relocs): New function.    

Wed Nov 17 17:38:58 1993  Sean Eric Fagan  (sef@cygnus.com)

        * nlmconv.c (select_output_format): Use nlm32-sparc for
        bfd_arch_sparc.

Wed Nov 17 14:41:35 1993  Jeffrey Osier  (jeffrey@thepub.cygnus.com)

        * nlmconv.1:   added man page
        * objcopy.1:   fixed format errors

Wed Nov 17 12:03:41 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * Makefile.in: Use CFLAGS as well as LDFLAGS when linking.

Wed Nov 17 04:50:55 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

        * strings.1: Fix typo.

Mon Nov 15 12:03:20 1993  Ken Raeburn  (raeburn@rtl.cygnus.com)

        * Makefile.in (DISTSTUFF): Build "info".
        (VERSION): Updated to cygnus-2.3.1; 2.3 has gone out.

Sun Nov 14 00:27:24 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * objdump.c (dump_stabs): Handle stabs-in-som as implemented
        by the new BFD SOM assembler.

Sat Nov 13 07:14:05 1993  David J. Mackenzie  (djm@rtl.cygnus.com)

        * ar.1 c++filt.1 nm.1 objcopy.1 objdump.1 ranlib.1 size.1
        strings.1 strip.1: Replace \(em in NAME section with \- so
        makewhatis can grok it.

Tue Nov  9 15:22:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * nlmconv.c (i386_mangle_relocs): Adjust reloc address by
        section output_offset.

Fri Nov  5 12:11:52 1993  Jeffrey Osier  (jeffrey@thepub.cygnus.com)

        * binutils.texi:  added nlmconv chapter

Wed Nov  3 16:10:50 1993  Jeffrey Wheat  (cassidy@cygnus.com)

        * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS

Wed Nov  3 15:09:23 1993  Ken Raeburn  (raeburn@rover.cygnus.com)

        * Makefile.in (distclean): Don't get rid of dvi or info files.

Tue Nov  2 13:29:59 1993  David J. Mackenzie  (djm@rtl.cygnus.com)

        * objcopy.c (S_ISLNK): Define as 0 if there's no S_IFLNK.

Fri Oct 29 16:02:34 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

        * binutils.texi: Move objcopy docs into alphabetical order.

        * objdump.c: Use xmalloc instead of malloc.

Fri Oct 29 11:11:14 1993  Stan Shebs  (shebs@rtl.cygnus.com)

        * objdump.c (info): Rename to formats_info.
        (dump_stabs_1): Better comments and formatting.

Thu Oct 28 19:43:16 1993  Stan Shebs  (shebs@rtl.cygnus.com)

        * ar.c (main): Always create the archive when quick appending,
        even if no input files have been given.

Wed Oct 27 12:03:06 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * nlmconv.c (main): Set sharedDebugRecordOffset and
        sharedDebugRecordCount fields in extended header.

        * nlmconv.c (main): Force moduleName field to upper case.

Mon Oct 25 16:45:42 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * objcopy.c (main): Give a usage message if there are too many
        arguments.

Mon Oct 25 10:37:08 1993  Ken Raeburn  (raeburn@rover.cygnus.com)

        * Makefile.in (install-info): Rewrite to take advantage of VPATH,
        so FSF distributions (with info files in $(srcdir)) install
        properly.
        (DISTSTUFF): Build nlmheader.c too.

Fri Oct 22 11:43:23 1993  Ken Raeburn  (raeburn@rover.cygnus.com)

        * ar.c (program_name): Don't define here.
        * objdump.c: Include "bucomm.h".
        (xmalloc): Don't declare here.
        (program_name): Don't define here.
        (program_version): Fixed type in declaration.
        * size.c: Include "bucomm.h".
        (program_name): Don't declare here.

Fri Oct 22 14:10:41 1993  Mark Eichin  (eichin@cygnus.com)

        * objdump.c (fprintf): hide declaration in FPRINTF_ALREADY_DECLARED

Fri Oct  1 12:43:00 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * nlmconv.c (i386_mangle_relocs): Resolve and remove PC relative
        relocs against defined symbols in the same section.

Thu Sep 30 16:46:26 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)

        * Makefile.in (binutils.dvi): use TEXIDIR to find texinfo.tex

Sat Sep 25 18:09:29 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

        * objcopy.c (simple_copy, smart_rename): New functions.
        (main): Use them.

Fri Sep 24 15:38:29 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * Makefile.in (clean, distclean): Recurse into testsuite.

Thu Sep 23 01:05:06 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * objcopy.c (setup_sections, copy_sections): If stripping, don't
        copy SEC_DEBUGGING sections.
        * objdump.c (dump_headers): Print SEC_DEBUGGING flag.

        * objdump.c (usage): Mention --stabs.

        * objcopy.c (copy_object): Copy all applicable file flags.
        (copy_file): Don't copy EXEC_P specially here.

Mon Sep 20 19:28:57 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * nlmconv.c (main): Adjust data section size to correspond to bss
        alignment adjustment.  Clear BSF_SECTION_SYM if symbol is moved to
        a different section.  Use time_t for time variable.
        (setup_sections): Only put sections with contents in output NLM.
        (i386_mangle_relocs): No symbols are common at this point.  Add
        casts to avoid warnings.        

Fri Sep 10 11:00:40 1993  Stan Shebs  (shebs@rtl.cygnus.com)

        * objdump.c: Made the --stabs option work for stabs-in-coff.
        (ELF_STAB_DISPLAY): Removed.
        (dump_elf_stabs): Renamed to dump_stabs, changed to run for
        any object file format.
        (dump_elf_stabs_1): Renamed to dump_stabs_1, added calls to
        generic BFD routines for non-ELF case, changed format of message
        for no-section-found case.
        (display_bfd): Always call dump_stabs if requested.
        (dump_data): Call bfd_section_size to get section size.

Fri Sep 10 08:12:23 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

        * Makefile.in (install): Don't put strings in tooldir/bin.

Mon Sep  6 15:39:04 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * nlmconv.c (total_bss_size): Removed.
        (main): Set the bss vma to always follow the data section.  Move
        symbols into new sections, and adjust values by output_offset.
        (setup_sections): Don't copy all sections, but instead point all
        text sections to .text, all data sections to .data, and all bss
        sections to .bss.
        (copy_sections): Adjust accordingly.

Thu Sep  2 12:34:03 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        Only build nlmconv if configured for a NetWare target.
        * configure.in: If we have some *-*-netware* target, or are using
        all targets, set BUILD_NLMCONV to $(NLMCONV_PROG) in Makefile.
        * Makefile.in (PROGS): Use $(BUILD_NLMCONV) rather than
        $(NLMCONV_PROG).

Tue Aug 31 14:13:35 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * objdump.c (ARCH_all): Define ARCH_hppa too.
        (dump_headers): Don't test for SEC_BALIGN if it's not defined by
        bfd.h.

Tue Aug 31 13:29:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * nlmconv.c (main): Force creation of .bss section.  Set up the
        sections before looking at the symbols.  Move all common symbols
        into .bss section.  Automatically define _edata and _end.  Only
        export symbols in the export list, with multiple prefixes if
        necessary.  Warn if no version.  Always create extended header.
        Set date automatically if not already set.
        (setup_sections): Count size of bss sections.
        (mangle_relocs, i386_mangle_relocs): Accept section argument, and
        take reloc_count as a changeable pointer; changed callers.
        (i386_mangle_relocs): Remove PC relative relocs within a section,
        as they require no adjustment.
        * nlmheader.y: Fixed memory allocation throughout: token STRING is
        now allocated on the heap, and freed if not needed.  Null
        terminated copyright message.  Accept version with only two
        strings.
        (symbol_list_opt): New nonterminal, either symbol_list or empty.
        (symbol_list): Use left recursion to avoid overflowing parser
        stack.
        (yylex): Rearranged beginning of line check.  Accept quoted
        strings using single quotes.  End generic argument at comment
        character or parentheses.
        (string_list_append): Fixed.
        (string_list_append1): New function.

        * bucomm.h: The first argument to xrealloc is PTR, not char *.
        * bucomm.c (xrealloc): Use PTR rather than char *.
        * Makefile.in (objdump.o): Depend upon config.status to notice
        --with-targets changes.
        (nlmconv.o): Depend upon bucomm.h.

Tue Aug 17 09:46:01 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

        * configure.in: Don't pass cpu to config.bfd.

Thu Aug 12 16:43:04 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

        * Makefile.in ($(NM_PROG)): Depend on demangle.o.
        (demangle.o): New target.
        (cplus-dem.o): Depend on it, to force compilation order when doing
        parallel compiles.

        * nm.c (print_symbol_info_{bsd,sysv,posix}): Take a bfd arg.
        (struct output_fns print_symbol_info): Ditto.
        (long_options, usage, main): Add -C --demangle option.
        (print_symname): New function, demangling if requested.
        (print_symbols, print_symbol_info_{bsd,sysv,posix}): Use it.

Wed Aug 11 22:57:23 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

        * Makefile.in: Put CFLAGS last in compilation rules and omit from
        linking rules.  Use ARCHDEFS to compile objdump.c.
        Update dependencies.
        * configure.in: Construct ARCHDEFS based on the BFD target makefile
        fragments.
        * objdump.c: Conditionalize calls to the print_insn_ARCH functions
        according to ARCHDEFS.

Thu Aug 12 08:06:15 1993  Ian Lance Taylor  (ian@cygnus.com)

        * ar.c: Removed obsolete and non-functional GNU960 code.

Wed Aug 11 13:08:26 1993  Ian Lance Taylor  (ian@cygnus.com)

        * size.c (berkeley_sum): New function.
        (bsssize, datasize, textsize): New global variables.
        (bss_section_name, data_section_name, text_section_name): Removed.
        (print_berkeley_format): Map berkeley_sum over all the sections,
        rather than only reporting sizes of specifically named sections.
        * Makefile.in ($(OBJDUMP_PROG)): Removed dependency on size.o.

Tue Aug 10 10:46:01 1993  Ian Lance Taylor  (ian@cygnus.com)

        * nlmconv.c, nlmconv.h, nlmheader.y: New files for program to
        convert object files into NetWare Loadable Modules.
        * Makefile.in (NLMCONV_PROG): New macro, define to be nlmconv.
        (PROGS): Add NLMCONV_PROG.
        (nlmheader.c, nlmheader.o, nlmconv.o, $(NLMCONV_PROG)): New
        targets.

Thu Aug  5 15:48:32 1993  david d `zoo' zuhn  (zoo@rtl.cygnus.com)

        * Makefile.in: define MAKEOVERRIDES to an empty string

Wed Aug  4 17:08:08 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

        * objcopy.c (copy_file): Make failures to process a file nonfatal.

Mon Aug  2 11:28:23 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

        * nm.c: Add -B option, like --format=bsd.

Tue Jul 27 16:29:54 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * objcopy.c (copy_file): If the file is neither an object nor an
        archive, give an error rather than returning success.

Mon Jul 19 16:13:40 1993  Ken Raeburn  (raeburn@rtl.cygnus.com)

        * objdump.c (objdump_print_address): Prefer non-local symbols over
        local ones, and especially discriminate against debugging symbols.
        Also, for relocateable files, try to find a symbol in the current
        section, instead of picking one from some random section with a
        convenient value (read, section offset).
        (disassemble_data): Cast argument to malloc to size_t first.
        (dump_data): Likewise.
        (dump_relocs): If a single section name is specified, show relocs
        only for that section.  Otherwise, silently omit sections without
        relocs.  Format table nicely even if values are printed using 16
        digits instead of 8.

Fri Jul 16 15:19:59 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

        * nm.c: Changes for final version of POSIX.2.
        (print_symbol_filename_{bsd,sysv,posix}): New functions.
        (formats): Add an element for a pointer to them.
        (print_symbols): Call it.
        (print_object_filename_posix, print_archive_member_posix): Produce
        output according to new POSIX.2 spec.

        * strings.c (print_strings): Handle STREAM being NULL.
        (strings_a_section): Pass a NULL.
        (main): Don't open /dev/null.

Thu Jul 15 12:44:09 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * objdump.c (disassemble_data): Handle the m88k.
        (display_bfd): Use bfd_errmsg, rather than just claiming that the
        bfd is not an object file.

Mon Jul 12 17:55:34 1993  K. Richard Pixley  (rich@cygnus.com)

        * Makefile.in (TAGS): make work again by naming directories
          explicitly rather than depending on undefined macros.
          (INSTALL_XFORM): correct bad install target.

Fri Jul  2 16:58:34 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

        * strings.c: Doc fixes.

Sun Jun 27 13:35:24 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

        * Makefile.in: Note dependencies on bucomm.h.
        (cplus-dem.o): Link c++filt with version.o.

        * strings.c: Include bucomm.h and add prototypes to other decls.
        Remove -h option.

        * bucomm.h: Declare xrealloc.

        * nm.c, objcopy.c, objdump.c, size.c, strings.c (main, usage): Add
        --help option.  Put "GNU" in the version message.
        (usage): Take stream and exit status as args.
        (main): Pass new args to usage.

Fri Jun 25 23:12:12 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

        * strings.c, strings.1: New files.
        * binutils.texi: Document strings.
        * Makefile.in: Add rules for it.

Fri Jun 25 20:44:43 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)

        * objdump.c: Use size-independent bfd elf section names.

Sun Jun 20 23:09:06 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)

        * objdump.c (objdump_print_address): Handle wide offsets by
        calling sprintf_vma.

Fri Jun 18 14:29:12 1993  Per Bothner  (bothner@deneb.cygnus.com)

        * objdump.c (syms2):  Removed unused variable.
        * objdump.c (remove_useless_symbols):  New function.
        * objdump.c (comp):  Simplify.
        * objdump.c (dis-assemble_data):  Make simpler and more
        efficient how we filter out useless symbols:  Just filter
        BEFORE the sort (using remove_useless_symbols).
        * objdump.c (objdump_print_address):  Simplify.
        Change output syntax to match gdb.

Thu Jun 17 16:53:56 1993  david d `zoo' zuhn (zoo@cygnus.com)
        
        * Makefile.in: canonicalize install.sh; for use within
        this directory (and subdirs)

Mon Jun 14 12:13:22 1993  david d `zoo' zuhn  (zoo at rtl.cygnus.com)

        * Makefile.in (install, install-info): remove parentdir support,
        use INSTALL_XFORM; define INSTALL_XFORM

Thu Jun 10 17:29:21 1993  Per Bothner  (bothner@cygnus.com)

        * objcopy.c (copy_object):  Fix bad size passed to xmalloc().

Mon Jun  7 12:41:12 1993  Per Bothner  (bothner@rtl.cygnus.com)

        * Makefile.in (INCLUDES):  Add -I../bfd for sysdep.h and bfd.h.
        * configure.in:  No longer need to configure to get sysdep.h.
        * objcopy.c (copy_object):  Fix symbol table handling.

Fri Jun  4 17:20:03 1993  Per Bothner  (bothner@cygnus.com)

        * objcopy.c (filter_symbols):  Cannot filter the symbols
        in place, because that confuses the relocs, so take separate
        parameter for output array.
        * objcopy.c (sympp):  Make two variables: isympp and osympp.
        * objcopy.c (copy_object):  Allocate separate array (osympp)
        for filtered symbols.

Fri Jun  4 10:51:44 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in: change recursion test to presence of a configured
        testsuite directory

Thu Jun  3 14:05:57 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * Makefile.in (underscore.c): Hack the backquoted command so it
        doesn't cause Solaris make to bomb.

Thu Jun  3 10:40:19 1993  Jeffrey Osier  (jeffrey@cygnus.com)

        * Makefile.in:  added c++filt and objcopy to MANPAGES variable
        * .Sanitize:  keep c++filt.1 and objcopy.1

Thu Jun  3 00:32:52 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in: rename LOADLIBES to EXTRALIBS

Wed Jun  2 18:30:24 1993  Jeffrey Osier  (jeffrey@cygnus.com)

        * c++filt.1, objcopy.1:  new man pages

Fri May 28 15:01:24 1993  Per Bothner  (bothner@rtl.cygnus.com)

        * Makefile.in (install):  Also install ar and ranlib in
        $(tooldir)/bin;  needed for building libgcc.a.
        * objdump.c (objdump_print_address):  Fix the check
        "coincidental" label matches by dis-allowing undefined
        or com symbols.

Thu May 27 16:58:31 1993  Jeffrey Osier  (jeffrey@cygnus.com)

        * biutils.texi:  revised c++filt chapter

Wed May 26 17:24:17 1993  Ian Lance Taylor  (ian@cygnus.com)

        * Makefile.in (FLAGS_TO_PASS): Pass down CC and CFLAGS.

Tue May 25 00:26:47 1993  Ken Raeburn  (raeburn@cygnus.com)

        * objdump.c (slurp_symtab): Print warning for bad symbol table.
        (bfd_elf32_find_section, Elf32_Internal_Shdr): Updated
        declarations and uses.

        * Makefile.in (DISTSTUFF): Don't build binutils.mm.

Fri May 21 10:51:19 1993  David J. Mackenzie  (djm@rtl.cygnus.com)

        * nm.c: Add -f/--format, -P/--portability, -t/--radix options.
        Make global variables static.
        (main): Make -v like -n, not -V, and make -A like -o, for POSIX.2.
        (set_print_radix, set_output_format,
        print_{object_filename,archive_filename,archive_member,symbol_info}
        {bsd,sysv,posix}): New functions.
        (display_file, print_symbols): Call them.

        * ar.c: Improve error messages.

        * nm.c (main): Handle long options that just set a flag.

        * nm.c (main), ar.c (do_show_version), objcopy.c (main), size.c
        (main): Exit after printing the version number, per the GNU coding
        standards.

Mon May 17 13:20:25 1993  Per Bothner  (bothner@cygnus.com)

        * README, Makefile.in:  Minor updates for 2.2.

Fri May 14 11:12:26 1993  Per Bothner  (bothner@cygnus.com)

        * Makefile.in (underscore.c):  Automatically generate
        (using nm) a file with the variable prepends_underscore.
        * Makefile.in (c++filt):  Link underscore.o with cplus-dem.o
        so that initial underscores get removed iff appropriate.
        * binutils.texi:  Preliminary documentation for c++filt.
        * Makefile.in, binutils.texi:  Set to version 2.2.

        * NEWS:  Mention copy->objcopy renaming and new c++filt program.

Wed May 12 12:05:36 1993  Ian Lance Taylor  (ian@cygnus.com)

        * Makefile.in (cplus-dem.o, $(DEMANGLER_PROG)): Build the
        demangler via cplus-dem.o, rather than directly from the .c file.

        * objcopy.c: Renamed from copy.c, updated comments accordingly.
        * Makefile.in, binutils.texi: Renamed copy to objcopy.
        * is-strip.c, maybe-strip.c, not-strip.c: Updated comments for
        rename of copy to objcopy.

Mon May 10 17:20:18 1993  Per Bothner  (bothner@cygnus.com)

        * binutils.texi (strip, -v option):  Fix typo.

Fri May  7 13:57:50 1993  Ian Lance Taylor  (ian@cygnus.com)

        * Makefile.in (RUNTEST): Define.
        (FLAGS_TO_PASS): Pass down RUNTEST.

Tue May  4 10:06:50 1993  Ian Lance Taylor  (ian@cygnus.com)

        * Makefile.in (DEMANGLER_PROG): Name it c++filt.
        (PROG): Also build and install COPY_PROG.

Mon May  3 19:11:48 1993  Per Bothner  (bothner@cygnus.com)

        * Makefile.in:  Change definition of $(tooldir) to match FSF.

Wed Apr 28 23:41:32 1993  David J. Mackenzie  (djm@rtl.cygnus.com)

        * size.c (usage): Add missing options.
        (main): Clean up option parser.

        * objdump.c (usage): Add missing options.
        (display_file): Print program name before calling
        bdf_perror. 

        * nm.c (usage): Add missing options.
        (main): Clean up option parser.
        (display_file): Print program name before calling
        bdf_perror. 

        * copy.c (copy_usage, strip_usage): Add missing options.

        * ar.c (usage): New function.
        (main): Call it.
        (open_inarch, do_quick_append): Print program name before calling
        bdf_perror. 

Thu Apr 22 15:01:35 1993  Ian Lance Taylor  (ian@cygnus.com)

        * nm.c (main): Accept and ignore -A and -B for MIPS compatibility.

Mon Apr 19 14:06:59 1993  Rob Savoye  (rob@cygnus.com)

        * Makefile.in: Added FLAGS_TO_PASS so tests get run on freshly
        built binaries if they exist. (otherwise the path)

Wed Apr  7 22:22:50 1993  Rob Savoye  (rob@cygnus.com)

        * Makefile.in: Changed check target to use DejaGnu.

Thu Apr  1 12:37:13 1993  Jim Kingdon  (kingdon@cygnus.com)

        * Makefile.in: Remove am29k-pinsn.c, i960-pinsn.c.
        objdump.c: a29k and i960 are `disassemble' not `print'.

        * objdump.c: Rename print_address to objdump_print_address
        and change parameters.
        (disassemble_data): Use objdump_print_address.

Wed Mar 31 10:25:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * objdump.c (disassemble_data): print_insn_sparc is now a
        `disassemble' not a `print'.
        Makefile.in: Remove sparc-pinsn.c (now in libopcodes.a).

        * objdump.c (disassemble_data): Use new read_memory_func stuff.

Thu Mar 25 10:38:11 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * objdump.c (fprintf): Declaration of variadic function had better
        be a prototype for ANSI C systems.

Mon Mar 22 23:19:46 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in: rename test-install to install-check

Fri Mar 19 14:40:08 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

        * objdump.c (disassemble_data): Add H8500.

Fri Mar 19 10:56:51 1993  Jim Kingdon  (kingdon@cygnus.com)

        * objdump.c (usage): Mention long options.

Thu Mar 18 14:22:17 1993  Per Bothner  (bothner@rtl.cygnus.com)

        * nm.c:  Modify behavior of -o flag for archives to match
        BSD4.4 and Sunos 4:  Prefix archive name before each line.

        * m68k-pinsn.c:  Removed.  Subsumed by ../opcodes/m68k-dis.c.
        * i386-pinsn.c:  Removed.  Subsumed by ../opcodes/i386-dis.c.
        * Makefile.in:  Adjust accordingly.
        * objdump.c:  Support new-style disassemblers (ones that use
        the interface of ../include/dis-asm.h).

Thu Feb 25 15:57:00 1993  Per Bothner  (bothner@rtl.cygnus.com)

        * Makefile.in:  When making tar file, remove texinfo/*,
        except for texinfo/texinfo.tex.
        * ardup.c:  Add extern declaration of strdup.
        * Makefile.in (testsuite):  Add 'else true' since otherwise
        Ultrix /bin/sh complains.

Wed Feb 24 19:44:18 1993  Per Bothner  (bothner@rtl.cygnus.com)

        * Makefile.in:  Set VERSION to 2.1.
        * README, NEWS: Updates.
        * nm.c:  Add -v as a synonym for -V.

Tue Feb 23 19:00:50 1993  Mike Werner  (mtw@poseidon.cygnus.com)

        * configure.in: added testsuite to configdirs.
        * Makefile.in: added support for building testsuite.

Mon Feb 22 22:52:10 1993  Per Bothner  (bothner@rtl.cygnus.com)

        * objdump.c (disassemble_data):  Print function names when
        given by bfd_find_nearest_line.  If not - still print
        line numbers.

Mon Feb 22 07:54:03 1993  Mike Werner  (mtw@poseidon.cygnus.com)

        * binutils/testsuite: made modifications to testcases, etc., to allow
        them to work properly  given the reorganization of deja-gnu and the
        relocation of the testcases from deja-gnu to a "tool" subdirectory.

Mon Feb 22 10:27:24 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * objdump.c (dump_data): Free up section contents each time
        through the loop.  Reported by minyard@bnr.ca.

Sun Feb 21 10:55:55 1993  Mike Werner  (mtw@poseidon.cygnus.com)

        * binutils/testsuite: Initial creation of binutils/testsuite.
        Migrated dejagnu testcases and support files for testing nm to
        binutils/testsuite from deja-gnu.  These files were moved "as is"
        with no modifications.  This migration is part of a major overhaul
        of dejagnu.  The modifications to these testcases, etc., which
        will allow them to work with the new version of dejagnu will be
        made in a future update.

Fri Feb 12 10:05:20 1993  Fred Fish  (fnf@cygnus.com)

        * Makefile.in (LIBIBERTY_SRC_DIR, LIBIBERTY_BIN_DIR): New macros.
        * Makefile.in (LIBIBERTY):  Use LIBIBERTY_BIN_DIR.
        * Makefile.in (DEMANGLER_PROG):  New program to build.  Add macro
        and rule.
        * Makefile.in (PROGS):  Add DEMANGLER_PROG.

Tue Jan 26 11:56:33 1993  Ian Lance Taylor  (ian@cygnus.com)

        * copy.c, nm.c, objdump.c, size.c: Use new bfd_is_com_section
        macro rather than checking for equality to bfd_com_section.

Fri Jan  8 15:50:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * objdump.c (disassemble_data): Fix code to find first useless
        symbol.

Thu Jan  7 13:13:31 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * objdump.c (disassemble_data): Use mips_print_insn for MIPS.
        Don't core dump if bfd_find_nearest_line returns false.

Wed Jan  6 17:14:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

        * objdump.c (disassemble_data): know how to disassemble z8000s
        too.

Wed Jan  6 15:16:27 1993  Per Bothner  (bothner@cygnus.com)

        * arsup.h (interactive), bucomm.h (program_name):  Prefix
        with 'extern', to avoid warnings from some compilers.

Wed Jan  6 15:14:11 1993  Per Bothner  (bothner@rtl.cygnus.com)

        * arparse.y: fix unnecessary shift/reduce

Tue Dec 22 15:46:56 1992  Per Bothner  (bothner@rtl.cygnus.com)

        * Makefile.in:  Make check depend on all.
        * Makefile.in (distclean): Remove sysdep.h.
        * size.c:  Use %u format where appropriate.
        * objdump.c:  Standardize:  L_SET -> SEEK_SET.
        * objdump.c:  Use new macro bfd_asymbol_bfd.
        * configure.in:  Allow std-host as the default ${mys_host}.

Thu Dec 17 19:38:19 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in: added dvi target, define and use TEXI2DVI

Tue Dec 15 18:05:07 1992  Per Bothner  (bothner@cygnus.com)

        * Makefile.in (dist):  Fix permissions before release.
        * size.c:  Use bfd_size_type (and long) where appropriate.
        * ar.c:  Make writing a map the default, to be compatible
        with SYSV and Posix.2.  Remove some bogus kludges that
        handled __.SYMDEF directly.
        * NEWS:  New file.

Mon Nov  9 13:36:53 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * Makefile.in: flex no longer needs the -S flag

Sat Nov  7 15:06:13 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * ar.c (extract_file): utime needs a pointer to a utimbuf

        * Makefile.in: handle -I includes better, adding $(BASEDIR)/bfd to
        the list (since some of the bfd/hosts/*.h files include other
        files from that directory)

Fri Nov  6 00:12:51 1992  John Gilmore  (gnu@cygnus.com)

        * i960-pinsn.c (MEM_MAX, MEM_SIZ):  Set upper bound properly.

Thu Nov  5 03:37:15 1992  John Gilmore  (gnu@cygnus.com)

        Clean up some old BFD ansification macros.

        * arsup.h, bucomm.h, objdump.h:  Remove EXFUN from binutils.
        It still remains as a local macro in gmalloc.c, which is derived
        from some other copy of GNU Malloc somewhere (FIXME).

        * ar.c, objdump.c, size.c:  Replace EXFUN with PROTO.  Make static
        fns really static.
        * arsup.h:  Declare extract_files.

Mon Nov  2 12:42:11 1992  Ian Lance Taylor  (ian@cygnus.com)

        * ar.c (extract_file): instead of checking USG: if POSIX_UTIME,
        use utime and utimbuf structure, otherwise if USE_UTIME use utime
        and array of two longs, otherwise use utimes.

Thu Oct 15 13:57:35 1992  Per Bothner  (bothner@cygnus.com)

        * binutils.tex:  Document yesterday's changes to strip and copy.

Wed Oct 14 13:22:14 1992  Per Bothner  (bothner@cygnus.com)

        * copy.c:  Re-do command-line parsing to use getopt_long().
        Add long option names.  Re-think option letters to be more
        consistent.
        * copy.c:  New function filter_symbols() for stripping only
        debug-symbols and/or local symbols.  Use these to support
        the previously-missing options of the old FSF strip.

Tue Oct 13 01:24:20 1992  John Gilmore  (gnu@cygnus.com)

        * configure.in (host):  Use ${srcdir}/../bfd/configure.host rather
        than repeating a copy of it here.

Wed Oct  7 12:53:52 1992  Ken Raeburn  (raeburn@cygnus.com)

        * copy.c (main): Even if is_strip, accept -d argument indicating
        alternate output format.  Needed by gdb for Nindy.

        * m68k-pinsn.c (print_insn_arg): Handle new "`" operand type.

Tue Oct  6 16:33:56 1992  Jeffrey Osier  (jeffrey@cygnus.com)

        * binutils.texi:  added documentation for "copy"

Tue Oct  6 14:22:56 1992  Per Bothner  (bothner at PersSony)

        * Makefile.in (*clean rules): Some cleaning up.
        * Makefile.in (dist): Make diststuff in gprof for a dist.

        * ar.c (do_show_version):  New function.
        * ar.c (main):  Fix so "ar -V" works.

Thu Oct  1 22:44:45 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in: now uses the cpu-vendor-os triple instead of
        nested cases.

Fri Sep 25 22:41:08 1992  John Gilmore  (gnu@cygnus.com)

        * i960-pinsn.c:  Change bzero to memset.
        * sparc-pinsn.c:  Change index to strchr.

Mon Sep 21 14:39:56 1992  Ian Lance Taylor  (ian@cygnus.com)

        * m68k-pinsn (print_insn_arg, fetch_arg): added support for
        operands to memory management instructions, from WRS.

Tue Sep 15 15:26:38 1992  Ian Lance Taylor  (ian@cygnus.com)

        * Makefile.in (install): if $(tooldir) exists, install nm and
        strip in $(tooldir)/bin.

Thu Sep  3 11:57:40 1992  Per Bothner  (bothner@rtl.cygnus.com)

        * Makefile.in:  Let's call it version 2.0.

Wed Sep  2 00:25:13 1992  Per Bothner  (bothner@rtl.cygnus.com)

        * Makefile.in:  Bump to version 0.98.
        * TODO, README:  Minor updates.

        * Makefile.in:  Added mostlyclean, distclean rules,
        and cleaned up clean, realclean.

Sun Aug 30 21:18:59 1992  Ian Lance Taylor  (ian@cygnus.com)

        * Makefile.in: map program names through program_transform_name
        when installing.

Sun Aug 30 18:09:03 1992  Per Bothner  (bothner@rtl.cygnus.com)

        * Makefile.in:  Bump to versions 1.97.90.
        * cplus-dem.c:  Removed.  Was nowhere used - and if some
        programs are changed to to demangling should now use the
        versions in libiberty.

Thu Aug 27 12:58:09 1992  Brendan Kehoe  (brendan@cygnus.com)

        * configure.in: add we32k

Mon Aug 24 14:53:42 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * ar.c (map_over_members): if the element of the archive has a
        null name, fill it in.

        * nm.c (do_one_rel_file): only warn if a bfd's flags say there
        will be symbols and there aren't any.

Wed Aug 19 11:20:25 1992  Ian Lance Taylor  (ian@cygnus.com)

        * m68k-pinsn.c: handle new operand type 'r', introduced for cas2.

Tue Aug 18 20:45:48 1992  Rob Savoye  (rob@cygnus.com)

        * nm.c objdump.c: Added support for a +version (-V)
        to print the version number.

        * ar.c, copy.c: Added support for a -V option to print
        the version number.

Tue Aug 18 13:28:44 1992  Ian Lance Taylor  (ian@cygnus.com)

        * config/mh-apollo68v: removed -g from CC definition.

        * Makefile.in: always create installation directories.

Mon Aug 17 18:33:41 1992  Per Bothner  (bothner@rtl.cygnus.com)

        * m68k-pinsn.c:  Minor fix in style of output (don't use
        range to indicate floating point control registers).

Tue Aug 11 23:42:21 1992  Per Bothner  (bothner@cygnus.com)

        * ar.c (main):  Don't *always* set the verbose flag!

Wed Aug  5 11:25:27 1992  Per Bothner  (bothner@rtl.cygnus.com)

        * copy.c:  When is_strip (because it is invoked as the strip
        program), follow traditional argv processing:
        'strip file1 file2' now strips file1 and file2, rather
        than stripping file1 (as input), leaving output in file2.

Mon Jul 27 16:28:08 1992  Per Bothner  (bothner@rtl.cygnus.com)

        * objdump.c (display_info, display_info_table):  Call
        bfd_set_format() on dummy bfd before using it (twice).
        * ar.c:  Make sure archive is created on command 'r'
        even when no elements are inserted.  (Clean up and
        simplify some non-working related code.)

Mon Jul 20 02:48:38 1992  D. V. Henkel-Wallace  (gumby@cygnus.com)

        * configure.in: hppa support doesn't assume hp OS (from sef).

Sat Jul 18 14:35:22 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in: recognize hppa hosts (bsd & hpux), error messages
        to stderr, not stdout

Fri Jul 17 18:39:44 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

        * ar.1, binutils.texi, i960-pinsn.c, nm.1, objdump.1, ranlib.1,
          size.1, sparc-pinsn.c, strip.1: removed rcsid's.

Thu Jul 16 16:55:24 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

        * Makefile.dos: removed rcsid.

Thu Jul 16 08:23:07 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * objdump.c (display_bfd): print state of BFD_IS_RELAXABLE too

Tue Jun 30 20:26:15 1992  D. V. Henkel-Wallace  (gumby@cygnus.com)

        * Makefile.in: Add program_suffix (parallel to program_prefix)

Thu Jun 25 04:52:45 1992  John Gilmore  (gnu at cygnus.com)

        * nm.c (sorters):  Lint.  Remove excess whitespace.

Wed Jun 24 13:48:07 1992  Per Bothner  (bothner@cygnus.com)

        * nm.c (valueof macro):  Add missing parentheses.
        (Their lack screwed up numeric_forward().)

Sun Jun 14 10:33:27 1992  John Gilmore  (gnu at cygnus.com)

        * objdump.c (dump_elf_stabs):  Also dump .stab.index and
        .stab.excl sections.
        (dump_elf_stabs_1):  Split out main body of old dump_elf_stabs.
        * objdump.1, binutils.texi:  Document new sections dumped.

Fri Jun 12 22:23:35 1992  John Gilmore  (gnu at cygnus.com)

        * size.c, objdump.c, bucomm.c:  Lint.

Thu Jun 11 01:19:06 1992  John Gilmore  (gnu at cygnus.com)

        * objdump.c (dump_elf_stabs): New feature: --stabs prints out a
        .stab section from an ELF file.  Installed under #ifdef
        ELF_STAB_DISPLAY so it can be easily disabled, since it requires
        bfd-internals header files and such.
        * objdump.1, binutils.texi:  Update for --stabs.  Also fix
        objdump's doc to use -- rather than + for long options.
        (FIXME:  Not yet fixed everywhere in binutils.texinfo.)

Wed Jun 10 07:53:24 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * objdump.c(display_info), patches from
        mohring@informatik.tu-muenchen.de to print the table much more
        nicely.

Thu May 28 13:36:16 1992  Per Bothner  (bothner@rtl.cygnus.com)

        * objdump.c:  Add another enum->int cast, for the sake of
        old compilers (such as PCC).

Wed May 27 13:01:44 1992  Per Bothner  (bothner@rtl.cygnus.com)

        * arlex.l:  Don't include <sysdep.h> (unneeded conflicts).
        Add declaration of strdup().

Fri May 22 13:40:37 1992  Per Bothner  (bothner@cygnus.com)

        * Makefile.in:  Use srcdir instead of VPATH in ldgram/ldlex
        rules, since these are used when building a distribution.
        * Makefile.in (arlex.c):  Don't re-direct output, since that
        leaves a bogus output files if it fails.

        * arlex.l:  Make work with lex, for what it's worth.
        * Makefile.in:  Better lex support.
        * Makefile.in (dist):  Generate flex and bison outputs
        for distribution.

Thu May 14 17:17:59 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

        * Makefile.in: get BISON definition right.

Fri May  8 07:47:08 1992  K. Richard Pixley  (rich@cygnus.com)

        * sanity.sh: default TMPDIR to ".".

Thu May  7 12:34:50 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)

        * binutils.texi: add doc for ar command language.

Wed May  6 18:05:36 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * arparse.y: make END call ar_end
        * arsup.c (ar_end): added, deletes temp file if archive session
        aborted.


Wed May  6 11:08:53 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

        * Makefile.in: use bison & flex from ../ if they exist.  Also,
          FLEX->LEX.

        * sanity.sh: remove temporary directory when finished.

Tue May  5 12:00:58 1992  Per Bothner  (bothner@rtl.cygnus.com)

        * Makefile.in:  Bump to version 1.97.
        * ar.c:  Declare errno for machines that need it.

Mon May  4 23:29:51 1992  John Gilmore  (gnu@cygnus.com)

        * objdump.c (display_info):  Handle error cases without coredump.
        Close the dummy temporary file we open in the loop.
        * Makefile.in (arsup.o):  Add kludge to build with Sun Make.

Fri May  1 16:20:23 1992  K. Richard Pixley  (rich@cygnus.com)

        * Makefile.in: added test-install target.

        * sanity.sh: new file.

        * Makefile.in: use sanity test on make check.

Tue Apr 21 13:38:37 1992  K. Richard Pixley  (rich@cygnus.com)

        * Makefile.in: rework CFLAGS so that they can be passed on the
          command line to make.  Remove MINUS_G.  Default CFLAGS to -g.

Wed Apr 15 14:33:07 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

        * arsup.c, arsup.h, arparse.y, arlex.l: support for archive
        scripting language.

Fri Mar  6 21:54:53 1992  K. Richard Pixley  (rich@cygnus.com)

        * Makefile.in: added check target.

Thu Mar  5 21:35:49 1992  K. Richard Pixley  (rich@cygnus.com)

        * Makefile.in: added clean-info target.

Tue Mar  3 15:36:37 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

        * Makefile.in: remove $(COPY_PROG) from PROGS.  It shouldn't be
          installed. added tooldir and program_prefix.

Wed Feb 26 18:04:40 1992  K. Richard Pixley  (rich@cygnus.com)

        * Makefile.in, configure.in: removed traces of namesubdir,
          -subdirs, $(subdir), $(unsubdir), some rcs triggers.  Forced
          copyrights to '92, changed some from Cygnus to FSF.

Sun Feb 16 12:53:02 1992  Per Bothner  (bothner at cygnus.com)

        * Makefile.in:  Bump version to 1.96, and remove -beta
        suffix from distribution name.
        * m68k-pinsn.c:  New macro COERCE_SIGNED_CHAR to extract
        the signed value of a character (even if chars are unsigned).
        * sparc-pinsn.c:  Add new operand types.

Thu Feb  6 12:14:19 1992  Steve Chamberlain  (sac at rtl.cygnus.com)

        * objdump.c (disassemble_data): don't print a section's contents
        if it's not loadable (eg bss)

Tue Jan 28 11:11:06 1992  Steve Chamberlain  (sac at rtl.cygnus.com)

        * m68k-pinsn.c (print_insn_arg): fixed so that -ve branch
        displacements don't get printed as large +ve ones.

Fri Jan 24 14:47:53 1992  Steve Chamberlain  (sac at rtl.cygnus.com)

        * copy.c, nm.c, objdump.c, size.c : changed to use the
        new reloc scheme.


Mon Dec 30 18:34:41 1991  Per Bothner  (bothner at cygnus.com)

        * bucomm.c (print_arelt_descr):  Tweek the output format
        so that 'ar tv' output follows Posix 1003.2/D11.
        Output is now also identical to Sun's (except __.SYMDEF).

Mon Dec 30 06:09:53 1991  John Gilmore  (gnu at cygnus.com)

        * Makefile.in:  Make `make' output more readable.

Wed Dec 18 15:04:45 1991  Per Bothner  (bothner at cygnus.com)

        * Makefile.in:  Bump to version 1.94.

Wed Dec 11 16:48:09 1991  Steve Chamberlain  (sac at cygnus.com)

        * ar.c: added "b" to fopens for dos
        * configdj.bat, makefile.dos new files from DJ

Tue Dec 10 04:07:26 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

        * Makefile.in: infodir belongs in datadir.

Sat Dec  7 17:09:37 1991  Steve Chamberlain  (sac at rtl.cygnus.com)

        * bucomm.h: created to hold prototypes of bucomm.c
        * objdump.h: created to hold prototyes of objdump.c
        * am29k-pinsn.c: include objdump.h
        * ar.c: include bucomm.h, get ar.h from the right place and
        include libbfd.h
        * bucomm.c: defunize bfd_fatal
        * copy.c: include bucomm.h, lint.
        * i960-pinsn.h: include bucomm.h
        * m68k-pinsn.h: lint
        * nm.c: include bucomm.h, lint
        * objdump.c: lint
        * sparc-pinsn.c: include objdump.h

        

Fri Dec  6 23:02:14 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

        * Makefile.in: added standards.text support.  install using
          INSTALL_PROGRAM and INSTALL_DATA.

        * configure.in: configure now does all of it's work from objdir so
          make file existence tests against ${srcdir}.

Thu Dec  5 22:46:22 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

        * Makefile.in: idestdir and ddestdir go away.  Added copyrights
          and shift gpl to v2.  Added ChangeLog if it didn't exist. docdir
          and mandir now keyed off datadir by default.

Wed Dec  4 22:42:03 1991  Per Bothner  (bothner at cygnus.com)

        * Makefile.in:  Bump to version 1.93.
        * Makefile.in:  Add make-strip.o:maybe-strip.c dependency
        for make versions that provide half-baked VPATH-support (e.g. Sun's).
        * size.c:  Improvements suggested by
        "david d [zoo] zuhn" <zoo@aps1.spa.umn.edu>:
        - Don't emit (Berkeley) headers if no files were found.
        - Return a non-zero return code on failure.

Sat Nov 30 21:34:19 1991  Steve Chamberlain  (sac at rtl.cygnus.com)

        Changes due to include file renaming:
        * am29k-pinsn.c: a29k-opcode.h  -> opcode/a29k.h
        * sparc-pinsn.c: sparc-opcode.h -> opcode/sparc.h
        * m68k-pinsn.c:  m68k-opcode.h  -> opcode/m68k.h
        * nm.c:          stab.gnu.h     -> aout/stab_gnu.h

Tue Nov 19 19:20:43 1991  Per Bothner  (bothner at cygnus.com)

        * README:  Mention MINIMIZE flag for bfd's make.

Mon Nov 18 12:05:37 1991  Per Bothner  (bothner at cygnus.com)

        * README:  Various improvements.

Sun Nov 17 23:40:59 1991  Per Bothner  (bothner at cygnus.com)

        * Makefile.in:  Bump to version 1.92.
        * version.c, Makefile.in:  Get version string from Makefile.
        * copy.c, is-strip.c, not-strip.c, maybe-strip.c, Makefile.in:
        Make the same change that we earlier did for ar/ranlib:
        Generate two different binaries for strip and copy and use
        a global variable with different values to distinguish
        ostrip from copy.  (-1 means to use argv[0] to decide,
        so you can get the old behavior, but it is no longer the default).
        * copy.c (copy_file):  Set EXEC_P of output bfd if input is so.
        * copy.c (main):  If is_strip==-1, compare last 5 chars
        of argv[0], not the whole path.
        * copy.c (main): Return 0, not 1.
        * copy.c (setup_sections):  Fix due to change in bfd_make_section
        now failing if asked for a duplicate section.
        * strip.c, ostrip.c:  Removed obsolete files.
        * ar.c, not-ranlib.c, maybe-ranlib.c:
        Change encoding of is_ranlib variable to be consistent
        with is_strip for strip.copy (i.e -1 to means use argv[0]).

Thu Nov 14 20:11:02 1991  Per Bothner  (bothner at cygnus.com)

        * version.c (program_version): Update to version 1.92.

Tue Nov 12 16:17:53 1991  Per Bothner  (bothner at cygnus.com)

        * ar.c (get_pos_bfd):  Previous fix was missing a "break".

Thu Nov  7 08:55:56 1991  Steve Chamberlain  (sac at cygnus.com)

        * am29k-pinsn.c: Fixed bug in mtacc, dmac and fmac instruction
        encodings. (Thaks to David Wood)

Sun Nov  3 14:50:23 1991  Per Bothner  (bothner at cygnus.com)

        * Makefile.in ($(DIST_NAME).tar.Z), TODO:  Various fixes.
        * ar.c (get_pos_bfd): Fix to handling of before/after
        positioning options.
        * bucomm.c (fatal):  MISSING_VFPRINTF is no longer an issue,
        since libiberty contains vfprintf etc if otherwise missing.
        * m68k-pinsn.c (print_insn_arg):  Support BB/BW/BL
        type operands, as used by branch instructions.
        * nm.c:  Delegate printing of symbols to BFD,
        by using bfd_print_symbol to do the formatting.

Mon Oct 28 11:20:47 1991  Steve Chamberlain  (steve at cygnus.com)

        * ar.c (write_archive.c): added unlink before rename since some
        systems can't rename onto an existant file.

Mon Oct 21 09:47:23 1991  Steve Chamberlain  (steve at rtl.cygnus.com)

        * nm.c: now doesn't crash if a symbol with no section and no
        SEC_ABS appears.

Thu Oct 17 15:25:50 1991  Per Bothner  (bothner at cygnus.com)

        * Makefile.in, version.c:  Bump to version 1.91.

Wed Oct 16 11:45:36 1991  Per Bothner  (bothner at cygnus.com)

        * Makefile.in, ar.c, bucomm.c, copy.c, cplus-dem.c, filemode.c,
        i960-pinsn.c, m68k-pinsn.c, nm.c, objdump.c, size.c, sparc-pinsn.c,
        * strip.c: Add or update Copyright notice.
        * TODO:  Add note on 'nm -a'.   
        * version.c: Update version number to 1.90.
        * Makefile.in: Fix making of documentation for dist.

Tue Oct 15 00:17:17 1991  Per Bothner  (bothner at cygnus.com)

        * README: New file.
        * Makefile.in: New kludgy rules for making a tarfile.
        * Makefile.in: Fix bindir path.

Mon Oct 14 17:34:29 1991  Roland H. Pesch  (pesch at cygnus.com)

        * Makefile.in: add targets binutils.mm, binutils.me

Fri Oct 11 22:44:21 1991  John Gilmore  (gnu at cygnus.com)

        * Makefile.in:  Avoid Sun Make VPATH bugs by adding dependencies.

Fri Oct 11 12:51:33 1991  Roland H. Pesch  (pesch at cygnus.com)

        * Makefile.in: add target "binutils.ms"

        * binutils.texinfo: minor restructuring for texi2roff comfort.

Fri Oct 11 04:12:28 1991  John Gilmore  (gnu at cygnus.com)

        Restructure configuration scheme for bfd, binutils, ld.

        * include/sys/h-*.h:  Move to bfd/hosts/h-*.h.
        * configure.in:  Revise to symlink sysdep.h to ../bfd/hosts/h-xxx.h.
        Change some config names to match other dirs.
        * *.c:  Include bfd.h before sysdep.h, so ansidecl and PROTO()
        get defined first.
        * Makefile.in:  Use -I. to get sysdep.h.

Wed Oct  9 22:42:56 1991  Per Bothner  (bothner at cygnus.com)

        * nm.c (print_symbols):  Handle NULL name field of symbol.
        * Makefile.in: Removed spurious comment.

Tue Oct  8 16:55:03 1991  Roland H. Pesch  (pesch at cygnus.com)

        * binutils.texinfo: minor typos, phrasing, formatting fixes.

Tue Oct  8 15:13:20 1991  Per Bothner  (bothner at cygnus.com)

        * configure.in: Get host file from ../bfd/config, not config.
        * config/*: Remove config directory and its files.

Tue Oct  8 13:58:59 1991  Roland H. Pesch  (pesch at cygnus.com)

        * Makefile.in: new targets binutils.dvi, binutils.info

        * binutils.texinfo: remove most remaining FIXME's, delete
        references to __.SYMDEF by name


Tue Oct  8 10:23:44 1991  Steve Chamberlain  (steve at cygnus.com)

        * objdump.c (print_address) Print addresses nicely.

Mon Oct  7 11:31:05 1991  Per Bothner  (bothner at cygnus.com)

        * ar.c, Makefile.in, new files {is,not,maybe}-ranlib.c:
        Make two different binaries for ar and ranlib, instead of
        distinguishing them at run time using argv[0].
        (Old behavior is still available if you "make ar_with_ranlib",
        but it is not the default.)
        * ranlib.sh (new):  An alternative one-line
        shell implementation of ranlib.

Fri Oct  4 21:49:44 1991  John Gilmore  (gnu at cygnus.com)

        * objdump.c:  Cope with renames of a few BFD types & enums.

Fri Oct  4 19:08:09 1991  Roland H. Pesch  (pesch at cygnus.com)

        * binutils.texinfo: add new file (rudimentary docn)

Mon Sep 30 12:30:39 1991  Per Bothner  (bothner at cygnus.com)

        * config/hmake-news: Add new file (for Sony NEWSOS3).
        * bucomm.c (fatal):  Conditionally compile fatal() depending on
        MISSING_VFPRINTF, and don't confuse the issue with NO_VARARGS.
        * objdump.c (dump_headers):  Trivial output format change.
        * objdump.c (display_info): Loop over integers, not enums,
        to appease old compilers.

Mon May 20 16:14:07 1991  Steve Chamberlain  (steve at cygint.cygnus.com)

        *objdump.c *nm.c *copy.c :hanged some types to work with 64 bit object files

Thu May 16 16:06:55 1991  Steve Chamberlain  (steve at cygint.cygnus.com)
     from bother
        * objdump.c (print_address): Make disasembled output more
        consistent with gdb and as: Add 0x when printing hex.
        Don't print extra leading zeros.
        Attempt to not print "filename.o".
        * objdump.c: Add some enum-to-int casts to accomodate old compilers.


Fri May  3 22:21:44 1991  John Gilmore  (gnu at cygint.cygnus.com)

        * copy.c:  Change =& constructs to = &, since they confuse older
        C compilers.

\f
Local Variables:
mode: indented-text
left-margin: 8
fill-column: 74
version-control: never
End: