binutils/ChangeLog

   1 Tue Mar 29 14:59:04 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
   2
   3         * nm.c (display_archive): Close each archive element after it has
   4         been displayed.
   5         * objdump.c (display_file): Likewise.
   6
   7 Mon Mar 28 13:04:08 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
   8
   9         * configure.in: Change error message to refer to bfd/config.bfd
  10         rather than bfd/configure.in.
  11
  12 Sun Mar 27 16:23:39 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
  13
  14         * More fixes for object formats which allow multiple sections
  15         with the same name:
  16         * objcopy.c (setup_section): Make a new output section even if
  17         one already exists with the given name.
  18         (copy_section): Use isection->output_section rather than trying
  19         to look the output section up by its (possibly non-unique) name.
  20
  21         * Makefile.in (install-info): Look for binutils.info in the
  22         current directory, then in $(srcdir).  Don't use $<.
  23
  24 Mon Mar 21 12:55:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
  25
  26         * objdump.c (objdump_print_address): Make static.  Declare with
  27         prototype.  Change vardiff from int to bfd_signed_vma.  Correct
  28         binary search termination condition.  When looking for same
  29         section symbol in relocatable file, handle final symbol correctly.
  30
  31 Sun Mar 20 11:26:36 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
  32
  33         * Makefile.in: Avoid bug in hpux sed.
  34
  35         * objcopy.c: Changes to keep it from stripping symbols used
  36         in output relocations.
  37         (mark_symbols_used_in_relocations): New function.  Mark symbols
  38         used in output relocations with BSF_KEEP.
  39         (filter_symbols): Do not strip symbols marked with BSF_KEEP.
  40         (copy_object): Reorder actions.  First setup sections, then
  41         build the output symbol table, then copy the section contents.
  42
  43 Fri Mar 18 10:53:55 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
  44
  45         * ar.c (write_archive): Allocate space for the null byte.  From
  46         Robert Lipe <robertl@arnet.com>.
  47
  48 Thu Mar 17 16:20:28 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
  49
  50         * Makefile.in: Built nm.new and strip.new to avoid problems with
  51         collect when . is in PATH.
  52         (STRIP_PROG): Change from strip to strip.new.
  53         (NM_PROG): Change from nm to nm.new.
  54         (install): Remove the .new when installing.
  55
  56 start-sanitize-powerpc-netware
  57 Wed Mar 16 16:27:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
  58
  59         * nlmconv.c (powerpc_build_stubs): Set BSF_DYNAMIC flag for each
  60         symbol for which we build a stub.
  61         (powerpc_mangle_relocs): Only reset TOC pointer for a call to a
  62         symbol with BSF_DYNAMIC flag set.
  63
  64 end-sanitize-powerpc-netware
  65 Tue Mar 15 23:04:13 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
  66
  67         * objcopy.c (filter_symbols): Use bfd_is_local_label to determine
  68         if a symbol represents a compiler-generated local label.
  69         (copy_object): Give the BFD backends a chance to copy any private
  70         bfd data from the input BFD to the output BFD.
  71         (setup_section): Give the BFD backends a chance to copy any private
  72         section data from the input section to the output section.
  73
  74 Mon Mar 14 11:15:58 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
  75
  76         * objcopy.c (mangle_section): Delete unused function.
  77         (setup_section): Set osection here instead of calling
  78         mangle section to do it.
  79
  80 Mon Mar 14 12:11:01 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
  81
  82         * ar.c (write_archive): Close inarch before unlinking it.
  83
  84 start-sanitize-powerpc-netware
  85 Fri Mar 11 22:20:48 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
  86
  87         * nlmconv.c (main): For PowerPC, call powerpc_build_stubs and
  88         powerpc_resolve_stubs.  Use __GOT0, not __toc_start.  Handle it if
  89         the start and end symbols are not in the text section.
  90         (struct powerpc_stub): New struct definition.
  91         (powerpc_stubs, powerpc_stub_insns): New static variables.
  92         (powerpc_initial_got_size): New static variable.
  93         (powerpc_build_stubs): New function.
  94         (powerpc_resolve_stubs): New function.
  95         (powerpc_mangle_relocs): Clear extraneous data in .got section.
  96         Rearrange reloc handling to handle ELF relocs that are not
  97         partial_inplace.  Resolve PC relative relocs.
  98
  99 end-sanitize-powerpc-netware
 100 Wed Mar  9 13:48:11 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
 101
 102         * ar.c (move_members): Fix it so that the abi positional modifiers
 103         don't delete all archive members following the insert point.
 104
 105 Tue Mar  8 13:14:43 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
 106
 107         * coffgrok.[ch]: New files, understand coff objects.
 108         * coffdump.c: Uses coffgrok to dump out the debug info of a coff
 109         file.
 110         * sysroff.info: Description of a SYSROFF object file.
 111         * sysinfo.y, syslex.l: Parse info file, generate a reader, writer,
 112         header files and a printer.
 113         * srconv.c: Uses coffgrok.c and sysroff.info to convert a coff
 114         file to a SYSROFF file.
 115
 116 Sat Feb 26 13:35:26 1994  Stan Shebs  (shebs@andros.cygnus.com)
 117
 118         * ar.c (do_quick_append): Pad with a genuine character 10,
 119         rather than whatever '\n' might happen to be.
 120
 121 Tue Feb 22 18:25:52 1994  Ian Lance Taylor  (ian@cygnus.com)
 122
 123         * nlmconv.c (main): Ignore debugging symbols when looking for
 124         special symbols by name.
 125
 126 Sun Feb 20 18:47:42 1994  Ian Lance Taylor  (ian@lisa.cygnus.com)
 127
 128         * nlmconv.c: Include libiberty.h.
 129 start-sanitize-powerpc-netware
 130         Support for PowerPC NetWare.
 131         * nlmconv.c (main): For PowerPC NetWare, automatically define the
 132         special symbols __toc_start.
 133         (select_output_format): Handle bfd_arch_powerpc.
 134         (mangle_relocs): Likewise.
 135         (powerpc_mangle_relocs): New function.
 136 end-sanitize-powerpc-netware
 137
 138 Thu Feb 17 09:28:23 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 139
 140         * ar.c, bucomm.c, nlmconv.c, nm.c, objcopy.c, objdump.c,
 141         size.c: Use bfd_get_error and bfd_set_error and new error names.
 142
 143 Fri Feb 11 15:54:51 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 144
 145         * objcopy.c (strip_main, copy_main): Add missing 'break' in switch.
 146
 147 Mon Feb  7 19:45:52 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 148
 149         * objdump.c (disassemble_data): Handle bfd_arch_powerpc.
 150
 151 Sun Feb  6 22:08:20 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 152
 153         * strings.c objdump.c nlmconv.c objcopy.c nm.c ar.c size.c (main):
 154         Call xmalloc_set_program_name.
 155
 156 Fri Feb  4 10:46:01 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 157
 158         * objcopy.c (filter_bytes): Make MEMHUNK a char *, not PTR, so we
 159         can do arithmetic on it.
 160
 161 Thu Feb  3 14:06:41 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 162
 163         * objdump.c (dump_section_stabs, read_section_stabs,
 164         print_section_stabs): Functions broken out of dump_stabs_1.
 165         Free the stabs and strings when done with them.
 166
 167 Wed Feb  2 13:42:23 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 168
 169         * nlmconv.c (main): Use bfd_get_flavour instead of struct member.
 170         * ar.c (print_contents, extract_file), size.c
 171         (print_berkeley_format, print_sysv_format): Use bfd_get_filename and
 172         bfd_my_archive instead of dereferencing the structs directly.
 173
 174         * ar.c: Use bfd_fatal and bfd_nonfatal instead of bfd_perror and exit.
 175         Indent.  Remove DEFUNs.
 176
 177         * nlmconv.c (main), objcopy.c (copy_file): Print matching formats
 178         if ambiguous match.
 179         * nm.c (display_file, display_archive), size.c (display_bfd):
 180         Eliminate gotos.
 181         Print matching formats if there is an ambiguous match.  Use
 182         bfd_nonfatal instead of hardcoded error message if nothing matches.
 183
 184         * arsup.c, ar.c, objdump.c: Use bfd_get_filename instead of
 185         abfd->filename.
 186
 187         * nm.c (display_archive): New function, from code in display_file.
 188         (display_rel_file): Renamed from do_one_rel_file.
 189
 190         * size.c: Indent.
 191         (display_archive): New function from code in display_file.
 192         (display_file): Check bfd_close error return.
 193
 194         * strings.c (strings_object_file): Check bfd_check_format
 195         error return.
 196
 197         * strings.c, objdump.c, size.c: Use bfd_nonfatal instead of bfd_perror.
 198
 199         * bucomm.c: Delete references to exit_handler.  It wasn't set
 200         anywhere, and now that we're using the libiberty xmalloc, it
 201         wouldn't always get called before exiting.
 202         (list_matching_formats): Function moved from objdump.c.
 203         * bucomm.h: Declare it.
 204
 205         * objdump.c (disassemble_data): Move some variable decls closer to
 206         their use.  Add some comments.  Replace a nested block with a
 207         return.
 208
 209 Mon Jan 31 18:50:41 1994  Stan Shebs  (shebs@andros.cygnus.com)
 210
 211         * objdump.c (display_target_list, display_info_table): Check that
 212         the bfd of the dummy output file is not null.
 213
 214 Wed Jan 26 13:13:18 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 215
 216         * objcopy.c (filter_bytes): New function.
 217         (copy_section): Call it.
 218         (copy_options, copy_usage, copy_main): Add --byte option to
 219         activate it.  Appropriate the -b option (which was an undocumented
 220         synonym for -F) for it, also.  Add --interleave, -i option for
 221         additional control.
 222         (setup_section, copy_section, mangle_section): Renamed with no `s'
 223         on the end.
 224         * objcopy.1, binutils.texi: Document the new options.
 225
 226         * objdump.c (display_target_tables, display_target_list):
 227         New functions broken out of display_info.
 228         Eliminate some magic constants.  Use more meaningful variable names.
 229         (dump_bfd_header): New function broken out of display_bfd.
 230         (dump_section_header): New function broken out of dump_headers.
 231         (remove_useless_symbols): Don't shadow global variable name with
 232         parameter.
 233         (objdump_print_address): Fix backward test.
 234
 235 Tue Jan 25 19:40:54 1994  Stan Shebs  (shebs@andros.cygnus.com)
 236
 237         * bucomm.c (print_arelt_descr): Change decl of `when' to time_t.
 238         * objdump.h: Removed.
 239
 240 Mon Jan 24 13:29:02 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 241
 242         * objdump.c (display_file): Remove call to list_matching_formats.
 243         It would never be called.
 244         (list_matching_formats): Take an arg giving the list of matching
 245         formats.
 246         (display_bfd): Pass the arg, and get it filled in by calling
 247         bfd_check_format_matches instead of bfd_check_format.
 248         (display_info, display_info_table): target_vector was renamed to
 249         bfd_target_vector.
 250
 251         * binutils.texi (objdump): Note some limitations of -h section
 252         address printing.
 253
 254 Sat Jan 22 16:20:46 1994  Stan Shebs  (shebs@andros.cygnus.com)
 255
 256         * Makefile.in (MALLOC): Set to emptiness by default.
 257         (ALL_CFLAGS): Add and use.
 258         (arparse.h): Make it depend on arparse.y.
 259         * ar.c (libbfd.h): Don't require to be in ../bfd.
 260         * objdump.c (comp): Rename to compare_symbols.
 261
 262 Fri Jan 21 20:22:30 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 263
 264         * objdump.c (list_matching_formats): If the file format is ambiguous,
 265         print the matching names so the user can choose one.
 266         (display_bfd): Call it.
 267         (display_file): Call it.
 268
 269 Fri Jan 21 19:17:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 270
 271         * objdump.c (disassemble_data): Support bfd_arch_rs6000.
 272
 273 Mon Jan 17 13:57:25 1994  Stan Shebs  (shebs@andros.cygnus.com)
 274
 275         * objdump.c (stab_name): Allocate dynamically.
 276         (stab_print): Use pointers to strings instead of char arrays.
 277         (dump_stabs): Change alloc and init of arrays appropriately.
 278         (dump_stabs_1): Always decide whether to print stab_name or
 279         the stab's type number, if unnamed.
 280
 281 Fri Jan 14 14:42:48 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 282
 283         * objcopy.c (strip_main, copy_main): Don't clobber the input file
 284         if copy_file fails.
 285
 286         * nlmconv.c (main): Warn about an attempt to use a shared library
 287         with uninitialized data.
 288
 289         * nlmconv.c (setup_sections): Make sure that we align the
 290         output_offset of each input section appropriately.
 291
 292 Thu Jan 13 17:32:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 293
 294         * objdump.c (dump_relocs): Don't crash if section name is NULL.
 295
 296 Tue Jan 11 19:46:33 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 297
 298         * filemode.c (filemodestring): Commented out; not used.
 299         (mode_string): Use POSIX definitions.
 300         (ftypelet): Likewise.
 301         (rwx): Removed; no longer used.
 302         * bucomm.c: Include bucomm.h.
 303         (bfd_nonfatal, bfd_fatal): Argument is const.
 304         (fatal): Make __STDC__ version.
 305         * bucomm.h (mode_string): Declare.
 306         * Makefile.in (bucomm.o): Depend upon bucomm.h
 307
 308 Sun Jan  9 12:03:20 1994  Ken Raeburn  (raeburn@rtl.cygnus.com)
 309
 310         * bucomm.c (xmalloc, xrealloc): Deleted.
 311         * bucomm.h (xmalloc, xrealloc): Fix prototypes, to correspond to
 312         libiberty version of functions.
 313
 314 Thu Jan  6 06:18:15 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 315
 316         * binutils.texi: Add a chapter summarizing the ways to select
 317         aspects of the target for each program.
 318
 319         * objdump.c (long_options, usage): Add long equivalents for all
 320         remaining short options that lacked them.
 321         * binutils.texi objdump.1: Document them.
 322
 323         * size.c (usage): Tweak usage message.
 324         * size.1: Add missing `=' in examples.
 325
 326         * binutils.texi strip.1 objcopy.1 nlmconv.1 objcopy.c nlmconv.c:
 327         Use "--target=bfdname" as the option to select the BFD target,
 328         like nm and size already do.
 329         Reserve "--format=format" for textual output selection options, but
 330         for now keep old option names as obsolete for backward compatibility.
 331
 332         * strings.c (main, strings_object_file, usage): Add --target option.
 333         * binutils.texi strings.1: Document it.
 334
 335 Sat Jan  1 13:58:24 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 336
 337         * ar.c (main): Add \n in error message.
 338
 339 Thu Dec 23 12:23:11 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 340
 341         gcc -Wall lint:
 342         * ar.c (main): Put parens around assignment used as truth value.
 343         * objcopy.c (strip_main): Remove unused variables.  Return 0.
 344         (copy_main): Remove unused variables.  Return 0.
 345         * objdump.c (display_bfd): Declare return value as void.
 346         (stab_print): Use "" instead of 0 to initialize array.
 347         (dump_stabs_1): Print vma using printf_vma.
 348         (display_info): Put parens around assignment used as truth value.
 349         * strings.c (print_strings): Cast printf arguments.
 350
 351         * objcopy.c (copy_main): Use copy_options, not strip_options.
 352
 353         * nlmheader.y (command): Warn about illegal date values.
 354
 355 Wed Dec 15 11:18:03 1993  David J. MacKenzie  (djm@frosty.eng.umd.edu)
 356
 357         * bucomm.c bucomm.h: Run through indent.  De-ansidecl-ify.
 358         (bfd_nonfatal): New function.
 359         (bfd_fatal): Call it.
 360
 361         * objcopy.c (smart_rename): Do a copy if the dest file has
 362         multiple hard links.  Remove source file on successful copy.
 363         Try to preserve mode and owner on successful rename.
 364
 365         * objcopy.c: Run through indent.  Clean up a bit.
 366         Make global variables static.
 367         Make {input,output}_{target,filename}, show_version local
 368         to various functions.
 369         New global variable `status' for exit status.
 370         (strip_main, copy_main): New functions with code from main.
 371         (nonfatal): New macro.  Use it globally instead of bfd_perror and
 372         bfd_fatal.
 373
 374         (copy_object): Call mangle_sections with bfd_map_over_sections.
 375         (mangle_sections): Adjust for new calling convention.
 376
 377 Fri Dec 10 11:28:11 1993  Ian Lance Taylor  (ian@deneb.cygnus.com)
 378
 379         * nlmheader.y (command): Accept MAP and FULLMAP without arguments.
 380         * nlmconv.c (main): Change error message for MAP and FULLMAP.
 381
 382 Thu Dec  9 17:47:19 1993  Ian Lance Taylor  (ian@deneb.cygnus.com)
 383
 384         * nlmconv.c (main): Warn about imported symbols that are not in
 385         the IMPORT list even if the IMPORT keyword is not used.
 386
 387         * nlmconv.c (debug, unlink_on_exit): New static variables.
 388         (long_options): Add "debug" and "linker".
 389         (main): Handle -d and -l arguments.  Make command line input and
 390         output files optional.  Parse the command file before opening the
 391         BFD's, which requires storing more information in local variables.
 392         If INPUT names multiple files, link them together.  Use OUTPUT for
 393         the output file name if not named on command line.
 394         (show_usage): Changed for new options.
 395         (link_inputs): New function to automatically invoke linker to
 396         handle multiple INPUT files.
 397         (choose_temp_base_try, choose_temp_base, pexecute): New functions,
 398         mostly copied from gcc/gcc.c.
 399         * nlmconv.h (input_files, output_file): Declare.
 400         * nlmheader.y (input_files, output_file): Define.
 401         (command): Support INPUT with a string_list argument.  Support
 402         OUTPUT.
 403         (string_list): Renamed from module_list.
 404         * Makefile.in (nlmconv.o): Define LD_NAME based on
 405         program_transform_name.
 406
 407 Wed Dec  8 10:09:04 1993  Ian Lance Taylor  (ian@deneb.cygnus.com)
 408
 409         * nlmheader.y (nlmheader_identify): New function.  Use it to print
 410         the program name just once, instead of with every error message.
 411
 412 Mon Dec  6 16:11:32 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 413
 414         * nlmconv.c (long_options): Changed --header-info to --header-file
 415         to match documentation and usage message.
 416
 417 Sun Dec  5 01:31:01 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)
 418
 419         * objdump.c (dump_relocs): Avoid dereferencing a NULL sym_ptr_ptr
 420         in a relocation.
 421
 422 Thu Dec  2 16:00:06 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 423
 424         * nlmconv.c (main): Change various types from bfd_size_type to
 425         size_t, since they have to be arguments to fread and fwrite.
 426         Change set from char * to unsigned char *.
 427         (select_output_format): Make mach argument unsigned.  Handle
 428         bfd_arch_alpha.
 429         (setup_sections): Don't copy the .reginfo section of an ECOFF
 430         file.  Call bfd_set_reloc to initialize the relocation fields.
 431         (copy_sections): Don't copy the .reginfo section of an ECOFF file.
 432         Combine all relocs for a section.
 433         (mangle_relocs): Change type of relocs to permit specific
 434         functions to change it.  Call alpha_mangle_relocs for alpha,
 435         default_mangle_relocs for other architectures.
 436         (default_mangle_relocs): New function.  Adjust the address of all
 437         relocs by the output_offset.
 438         (i386_mangle_relocs): Change type of relocs argument.  Cast length
 439         argument to memmove to size_t.
 440         (alpha_mangle_relocs): New function.
 441
 442 Wed Nov 17 17:38:58 1993  Sean Eric Fagan  (sef@cygnus.com)
 443
 444         * nlmconv.c (select_output_format): Use nlm32-sparc for
 445         bfd_arch_sparc.
 446
 447 Wed Nov 17 14:41:35 1993  Jeffrey Osier  (jeffrey@thepub.cygnus.com)
 448
 449         * nlmconv.1:   added man page
 450         * objcopy.1:   fixed format errors
 451
 452 Wed Nov 17 12:03:41 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 453
 454         * Makefile.in: Use CFLAGS as well as LDFLAGS when linking.
 455
 456 Wed Nov 17 04:50:55 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
 457
 458         * strings.1: Fix typo.
 459
 460 Mon Nov 15 12:03:20 1993  Ken Raeburn  (raeburn@rtl.cygnus.com)
 461
 462         * Makefile.in (DISTSTUFF): Build "info".
 463         (VERSION): Updated to cygnus-2.3.1; 2.3 has gone out.
 464
 465 Sun Nov 14 00:27:24 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)
 466
 467         * objdump.c (dump_stabs): Handle stabs-in-som as implemented
 468         by the new BFD SOM assembler.
 469
 470 Sat Nov 13 07:14:05 1993  David J. Mackenzie  (djm@rtl.cygnus.com)
 471
 472         * ar.1 c++filt.1 nm.1 objcopy.1 objdump.1 ranlib.1 size.1
 473         strings.1 strip.1: Replace \(em in NAME section with \- so
 474         makewhatis can grok it.
 475
 476 Tue Nov  9 15:22:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 477
 478         * nlmconv.c (i386_mangle_relocs): Adjust reloc address by
 479         section output_offset.
 480
 481 Fri Nov  5 12:11:52 1993  Jeffrey Osier  (jeffrey@thepub.cygnus.com)
 482
 483         * binutils.texi:  added nlmconv chapter
 484
 485 Wed Nov  3 16:10:50 1993  Jeffrey Wheat  (cassidy@cygnus.com)
 486
 487         * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS
 488
 489 Wed Nov  3 15:09:23 1993  Ken Raeburn  (raeburn@rover.cygnus.com)
 490
 491         * Makefile.in (distclean): Don't get rid of dvi or info files.
 492
 493 Tue Nov  2 13:29:59 1993  David J. Mackenzie  (djm@rtl.cygnus.com)
 494
 495         * objcopy.c (S_ISLNK): Define as 0 if there's no S_IFLNK.
 496
 497 Fri Oct 29 16:02:34 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
 498
 499         * binutils.texi: Move objcopy docs into alphabetical order.
 500
 501         * objdump.c: Use xmalloc instead of malloc.
 502
 503 Fri Oct 29 11:11:14 1993  Stan Shebs  (shebs@rtl.cygnus.com)
 504
 505         * objdump.c (info): Rename to formats_info.
 506         (dump_stabs_1): Better comments and formatting.
 507
 508 Thu Oct 28 19:43:16 1993  Stan Shebs  (shebs@rtl.cygnus.com)
 509
 510         * ar.c (main): Always create the archive when quick appending,
 511         even if no input files have been given.
 512
 513 Wed Oct 27 12:03:06 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 514
 515         * nlmconv.c (main): Set sharedDebugRecordOffset and
 516         sharedDebugRecordCount fields in extended header.
 517
 518         * nlmconv.c (main): Force moduleName field to upper case.
 519
 520 Mon Oct 25 16:45:42 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 521
 522         * objcopy.c (main): Give a usage message if there are too many
 523         arguments.
 524
 525 Mon Oct 25 10:37:08 1993  Ken Raeburn  (raeburn@rover.cygnus.com)
 526
 527         * Makefile.in (install-info): Rewrite to take advantage of VPATH,
 528         so FSF distributions (with info files in $(srcdir)) install
 529         properly.
 530         (DISTSTUFF): Build nlmheader.c too.
 531
 532 Fri Oct 22 11:43:23 1993  Ken Raeburn  (raeburn@rover.cygnus.com)
 533
 534         * ar.c (program_name): Don't define here.
 535         * objdump.c: Include "bucomm.h".
 536         (xmalloc): Don't declare here.
 537         (program_name): Don't define here.
 538         (program_version): Fixed type in declaration.
 539         * size.c: Include "bucomm.h".
 540         (program_name): Don't declare here.
 541
 542 Fri Oct 22 14:10:41 1993  Mark Eichin  (eichin@cygnus.com)
 543
 544         * objdump.c (fprintf): hide declaration in FPRINTF_ALREADY_DECLARED
 545
 546 Fri Oct  1 12:43:00 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 547
 548         * nlmconv.c (i386_mangle_relocs): Resolve and remove PC relative
 549         relocs against defined symbols in the same section.
 550
 551 Thu Sep 30 16:46:26 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
 552
 553         * Makefile.in (binutils.dvi): use TEXIDIR to find texinfo.tex
 554
 555 Sat Sep 25 18:09:29 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
 556
 557         * objcopy.c (simple_copy, smart_rename): New functions.
 558         (main): Use them.
 559
 560 Fri Sep 24 15:38:29 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 561
 562         * Makefile.in (clean, distclean): Recurse into testsuite.
 563
 564 Thu Sep 23 01:05:06 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 565
 566         * objcopy.c (setup_sections, copy_sections): If stripping, don't
 567         copy SEC_DEBUGGING sections.
 568         * objdump.c (dump_headers): Print SEC_DEBUGGING flag.
 569
 570         * objdump.c (usage): Mention --stabs.
 571
 572         * objcopy.c (copy_object): Copy all applicable file flags.
 573         (copy_file): Don't copy EXEC_P specially here.
 574
 575 Mon Sep 20 19:28:57 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 576
 577         * nlmconv.c (main): Adjust data section size to correspond to bss
 578         alignment adjustment.  Clear BSF_SECTION_SYM if symbol is moved to
 579         a different section.  Use time_t for time variable.
 580         (setup_sections): Only put sections with contents in output NLM.
 581         (i386_mangle_relocs): No symbols are common at this point.  Add
 582         casts to avoid warnings.
 583
 584 Fri Sep 10 11:00:40 1993  Stan Shebs  (shebs@rtl.cygnus.com)
 585
 586         * objdump.c: Made the --stabs option work for stabs-in-coff.
 587         (ELF_STAB_DISPLAY): Removed.
 588         (dump_elf_stabs): Renamed to dump_stabs, changed to run for
 589         any object file format.
 590         (dump_elf_stabs_1): Renamed to dump_stabs_1, added calls to
 591         generic BFD routines for non-ELF case, changed format of message
 592         for no-section-found case.
 593         (display_bfd): Always call dump_stabs if requested.
 594         (dump_data): Call bfd_section_size to get section size.
 595
 596 Fri Sep 10 08:12:23 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
 597
 598         * Makefile.in (install): Don't put strings in tooldir/bin.
 599
 600 Mon Sep  6 15:39:04 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 601
 602         * nlmconv.c (total_bss_size): Removed.
 603         (main): Set the bss vma to always follow the data section.  Move
 604         symbols into new sections, and adjust values by output_offset.
 605         (setup_sections): Don't copy all sections, but instead point all
 606         text sections to .text, all data sections to .data, and all bss
 607         sections to .bss.
 608         (copy_sections): Adjust accordingly.
 609
 610 Thu Sep  2 12:34:03 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 611
 612         Only build nlmconv if configured for a NetWare target.
 613         * configure.in: If we have some *-*-netware* target, or are using
 614         all targets, set BUILD_NLMCONV to $(NLMCONV_PROG) in Makefile.
 615         * Makefile.in (PROGS): Use $(BUILD_NLMCONV) rather than
 616         $(NLMCONV_PROG).
 617
 618 Tue Aug 31 14:13:35 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
 619
 620         * objdump.c (ARCH_all): Define ARCH_hppa too.
 621         (dump_headers): Don't test for SEC_BALIGN if it's not defined by
 622         bfd.h.
 623
 624 Tue Aug 31 13:29:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 625
 626         * nlmconv.c (main): Force creation of .bss section.  Set up the
 627         sections before looking at the symbols.  Move all common symbols
 628         into .bss section.  Automatically define _edata and _end.  Only
 629         export symbols in the export list, with multiple prefixes if
 630         necessary.  Warn if no version.  Always create extended header.
 631         Set date automatically if not already set.
 632         (setup_sections): Count size of bss sections.
 633         (mangle_relocs, i386_mangle_relocs): Accept section argument, and
 634         take reloc_count as a changeable pointer; changed callers.
 635         (i386_mangle_relocs): Remove PC relative relocs within a section,
 636         as they require no adjustment.
 637         * nlmheader.y: Fixed memory allocation throughout: token STRING is
 638         now allocated on the heap, and freed if not needed.  Null
 639         terminated copyright message.  Accept version with only two
 640         strings.
 641         (symbol_list_opt): New nonterminal, either symbol_list or empty.
 642         (symbol_list): Use left recursion to avoid overflowing parser
 643         stack.
 644         (yylex): Rearranged beginning of line check.  Accept quoted
 645         strings using single quotes.  End generic argument at comment
 646         character or parentheses.
 647         (string_list_append): Fixed.
 648         (string_list_append1): New function.
 649
 650         * bucomm.h: The first argument to xrealloc is PTR, not char *.
 651         * bucomm.c (xrealloc): Use PTR rather than char *.
 652         * Makefile.in (objdump.o): Depend upon config.status to notice
 653         --with-targets changes.
 654         (nlmconv.o): Depend upon bucomm.h.
 655
 656 Tue Aug 17 09:46:01 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
 657
 658         * configure.in: Don't pass cpu to config.bfd.
 659
 660 Thu Aug 12 16:43:04 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
 661
 662         * Makefile.in ($(NM_PROG)): Depend on demangle.o.
 663         (demangle.o): New target.
 664         (cplus-dem.o): Depend on it, to force compilation order when doing
 665         parallel compiles.
 666
 667         * nm.c (print_symbol_info_{bsd,sysv,posix}): Take a bfd arg.
 668         (struct output_fns print_symbol_info): Ditto.
 669         (long_options, usage, main): Add -C --demangle option.
 670         (print_symname): New function, demangling if requested.
 671         (print_symbols, print_symbol_info_{bsd,sysv,posix}): Use it.
 672
 673 Wed Aug 11 22:57:23 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
 674
 675         * Makefile.in: Put CFLAGS last in compilation rules and omit from
 676         linking rules.  Use ARCHDEFS to compile objdump.c.
 677         Update dependencies.
 678         * configure.in: Construct ARCHDEFS based on the BFD target makefile
 679         fragments.
 680         * objdump.c: Conditionalize calls to the print_insn_ARCH functions
 681         according to ARCHDEFS.
 682
 683 Thu Aug 12 08:06:15 1993  Ian Lance Taylor  (ian@cygnus.com)
 684
 685         * ar.c: Removed obsolete and non-functional GNU960 code.
 686
 687 Wed Aug 11 13:08:26 1993  Ian Lance Taylor  (ian@cygnus.com)
 688
 689         * size.c (berkeley_sum): New function.
 690         (bsssize, datasize, textsize): New global variables.
 691         (bss_section_name, data_section_name, text_section_name): Removed.
 692         (print_berkeley_format): Map berkeley_sum over all the sections,
 693         rather than only reporting sizes of specifically named sections.
 694         * Makefile.in ($(OBJDUMP_PROG)): Removed dependency on size.o.
 695
 696 Tue Aug 10 10:46:01 1993  Ian Lance Taylor  (ian@cygnus.com)
 697
 698         * nlmconv.c, nlmconv.h, nlmheader.y: New files for program to
 699         convert object files into NetWare Loadable Modules.
 700         * Makefile.in (NLMCONV_PROG): New macro, define to be nlmconv.
 701         (PROGS): Add NLMCONV_PROG.
 702         (nlmheader.c, nlmheader.o, nlmconv.o, $(NLMCONV_PROG)): New
 703         targets.
 704
 705 Thu Aug  5 15:48:32 1993  david d `zoo' zuhn  (zoo@rtl.cygnus.com)
 706
 707         * Makefile.in: define MAKEOVERRIDES to an empty string
 708
 709 Wed Aug  4 17:08:08 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
 710
 711         * objcopy.c (copy_file): Make failures to process a file nonfatal.
 712
 713 Mon Aug  2 11:28:23 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
 714
 715         * nm.c: Add -B option, like --format=bsd.
 716
 717 Tue Jul 27 16:29:54 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 718
 719         * objcopy.c (copy_file): If the file is neither an object nor an
 720         archive, give an error rather than returning success.
 721
 722 Mon Jul 19 16:13:40 1993  Ken Raeburn  (raeburn@rtl.cygnus.com)
 723
 724         * objdump.c (objdump_print_address): Prefer non-local symbols over
 725         local ones, and especially discriminate against debugging symbols.
 726         Also, for relocateable files, try to find a symbol in the current
 727         section, instead of picking one from some random section with a
 728         convenient value (read, section offset).
 729         (disassemble_data): Cast argument to malloc to size_t first.
 730         (dump_data): Likewise.
 731         (dump_relocs): If a single section name is specified, show relocs
 732         only for that section.  Otherwise, silently omit sections without
 733         relocs.  Format table nicely even if values are printed using 16
 734         digits instead of 8.
 735
 736 Fri Jul 16 15:19:59 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
 737
 738         * nm.c: Changes for final version of POSIX.2.
 739         (print_symbol_filename_{bsd,sysv,posix}): New functions.
 740         (formats): Add an element for a pointer to them.
 741         (print_symbols): Call it.
 742         (print_object_filename_posix, print_archive_member_posix): Produce
 743         output according to new POSIX.2 spec.
 744
 745         * strings.c (print_strings): Handle STREAM being NULL.
 746         (strings_a_section): Pass a NULL.
 747         (main): Don't open /dev/null.
 748
 749 Thu Jul 15 12:44:09 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 750
 751         * objdump.c (disassemble_data): Handle the m88k.
 752         (display_bfd): Use bfd_errmsg, rather than just claiming that the
 753         bfd is not an object file.
 754
 755 Mon Jul 12 17:55:34 1993  K. Richard Pixley  (rich@cygnus.com)
 756
 757         * Makefile.in (TAGS): make work again by naming directories
 758           explicitly rather than depending on undefined macros.
 759           (INSTALL_XFORM): correct bad install target.
 760
 761 Fri Jul  2 16:58:34 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
 762
 763         * strings.c: Doc fixes.
 764
 765 Sun Jun 27 13:35:24 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
 766
 767         * Makefile.in: Note dependencies on bucomm.h.
 768         (cplus-dem.o): Link c++filt with version.o.
 769
 770         * strings.c: Include bucomm.h and add prototypes to other decls.
 771         Remove -h option.
 772
 773         * bucomm.h: Declare xrealloc.
 774
 775         * nm.c, objcopy.c, objdump.c, size.c, strings.c (main, usage): Add
 776         --help option.  Put "GNU" in the version message.
 777         (usage): Take stream and exit status as args.
 778         (main): Pass new args to usage.
 779
 780 Fri Jun 25 23:12:12 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
 781
 782         * strings.c, strings.1: New files.
 783         * binutils.texi: Document strings.
 784         * Makefile.in: Add rules for it.
 785
 786 Fri Jun 25 20:44:43 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
 787
 788         * objdump.c: Use size-independent bfd elf section names.
 789
 790 Sun Jun 20 23:09:06 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
 791
 792         * objdump.c (objdump_print_address): Handle wide offsets by
 793         calling sprintf_vma.
 794
 795 Fri Jun 18 14:29:12 1993  Per Bothner  (bothner@deneb.cygnus.com)
 796
 797         * objdump.c (syms2):  Removed unused variable.
 798         * objdump.c (remove_useless_symbols):  New function.
 799         * objdump.c (comp):  Simplify.
 800         * objdump.c (dis-assemble_data):  Make simpler and more
 801         efficient how we filter out useless symbols:  Just filter
 802         BEFORE the sort (using remove_useless_symbols).
 803         * objdump.c (objdump_print_address):  Simplify.
 804         Change output syntax to match gdb.
 805
 806 Thu Jun 17 16:53:56 1993  david d `zoo' zuhn (zoo@cygnus.com)
 807
 808         * Makefile.in: canonicalize install.sh; for use within
 809         this directory (and subdirs)
 810
 811 Mon Jun 14 12:13:22 1993  david d `zoo' zuhn  (zoo at rtl.cygnus.com)
 812
 813         * Makefile.in (install, install-info): remove parentdir support,
 814         use INSTALL_XFORM; define INSTALL_XFORM
 815
 816 Thu Jun 10 17:29:21 1993  Per Bothner  (bothner@cygnus.com)
 817
 818         * objcopy.c (copy_object):  Fix bad size passed to xmalloc().
 819
 820 Mon Jun  7 12:41:12 1993  Per Bothner  (bothner@rtl.cygnus.com)
 821
 822         * Makefile.in (INCLUDES):  Add -I../bfd for sysdep.h and bfd.h.
 823         * configure.in:  No longer need to configure to get sysdep.h.
 824         * objcopy.c (copy_object):  Fix symbol table handling.
 825
 826 Fri Jun  4 17:20:03 1993  Per Bothner  (bothner@cygnus.com)
 827
 828         * objcopy.c (filter_symbols):  Cannot filter the symbols
 829         in place, because that confuses the relocs, so take separate
 830         parameter for output array.
 831         * objcopy.c (sympp):  Make two variables: isympp and osympp.
 832         * objcopy.c (copy_object):  Allocate separate array (osympp)
 833         for filtered symbols.
 834
 835 Fri Jun  4 10:51:44 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
 836
 837         * Makefile.in: change recursion test to presence of a configured
 838         testsuite directory
 839
 840 Thu Jun  3 14:05:57 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
 841
 842         * Makefile.in (underscore.c): Hack the backquoted command so it
 843         doesn't cause Solaris make to bomb.
 844
 845 Thu Jun  3 10:40:19 1993  Jeffrey Osier  (jeffrey@cygnus.com)
 846
 847         * Makefile.in:  added c++filt and objcopy to MANPAGES variable
 848         * .Sanitize:  keep c++filt.1 and objcopy.1
 849
 850 Thu Jun  3 00:32:52 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
 851
 852         * Makefile.in: rename LOADLIBES to EXTRALIBS
 853
 854 Wed Jun  2 18:30:24 1993  Jeffrey Osier  (jeffrey@cygnus.com)
 855
 856         * c++filt.1, objcopy.1:  new man pages
 857
 858 Fri May 28 15:01:24 1993  Per Bothner  (bothner@rtl.cygnus.com)
 859
 860         * Makefile.in (install):  Also install ar and ranlib in
 861         $(tooldir)/bin;  needed for building libgcc.a.
 862         * objdump.c (objdump_print_address):  Fix the check
 863         "coincidental" label matches by dis-allowing undefined
 864         or com symbols.
 865
 866 Thu May 27 16:58:31 1993  Jeffrey Osier  (jeffrey@cygnus.com)
 867
 868         * biutils.texi:  revised c++filt chapter
 869
 870 Wed May 26 17:24:17 1993  Ian Lance Taylor  (ian@cygnus.com)
 871
 872         * Makefile.in (FLAGS_TO_PASS): Pass down CC and CFLAGS.
 873
 874 Tue May 25 00:26:47 1993  Ken Raeburn  (raeburn@cygnus.com)
 875
 876         * objdump.c (slurp_symtab): Print warning for bad symbol table.
 877         (bfd_elf32_find_section, Elf32_Internal_Shdr): Updated
 878         declarations and uses.
 879
 880         * Makefile.in (DISTSTUFF): Don't build binutils.mm.
 881
 882 Fri May 21 10:51:19 1993  David J. Mackenzie  (djm@rtl.cygnus.com)
 883
 884         * nm.c: Add -f/--format, -P/--portability, -t/--radix options.
 885         Make global variables static.
 886         (main): Make -v like -n, not -V, and make -A like -o, for POSIX.2.
 887         (set_print_radix, set_output_format,
 888         print_{object_filename,archive_filename,archive_member,symbol_info}
 889         {bsd,sysv,posix}): New functions.
 890         (display_file, print_symbols): Call them.
 891
 892         * ar.c: Improve error messages.
 893
 894         * nm.c (main): Handle long options that just set a flag.
 895
 896         * nm.c (main), ar.c (do_show_version), objcopy.c (main), size.c
 897         (main): Exit after printing the version number, per the GNU coding
 898         standards.
 899
 900 Mon May 17 13:20:25 1993  Per Bothner  (bothner@cygnus.com)
 901
 902         * README, Makefile.in:  Minor updates for 2.2.
 903
 904 Fri May 14 11:12:26 1993  Per Bothner  (bothner@cygnus.com)
 905
 906         * Makefile.in (underscore.c):  Automatically generate
 907         (using nm) a file with the variable prepends_underscore.
 908         * Makefile.in (c++filt):  Link underscore.o with cplus-dem.o
 909         so that initial underscores get removed iff appropriate.
 910         * binutils.texi:  Preliminary documentation for c++filt.
 911         * Makefile.in, binutils.texi:  Set to version 2.2.
 912
 913         * NEWS:  Mention copy->objcopy renaming and new c++filt program.
 914
 915 Wed May 12 12:05:36 1993  Ian Lance Taylor  (ian@cygnus.com)
 916
 917         * Makefile.in (cplus-dem.o, $(DEMANGLER_PROG)): Build the
 918         demangler via cplus-dem.o, rather than directly from the .c file.
 919
 920         * objcopy.c: Renamed from copy.c, updated comments accordingly.
 921         * Makefile.in, binutils.texi: Renamed copy to objcopy.
 922         * is-strip.c, maybe-strip.c, not-strip.c: Updated comments for
 923         rename of copy to objcopy.
 924
 925 Mon May 10 17:20:18 1993  Per Bothner  (bothner@cygnus.com)
 926
 927         * binutils.texi (strip, -v option):  Fix typo.
 928
 929 Fri May  7 13:57:50 1993  Ian Lance Taylor  (ian@cygnus.com)
 930
 931         * Makefile.in (RUNTEST): Define.
 932         (FLAGS_TO_PASS): Pass down RUNTEST.
 933
 934 Tue May  4 10:06:50 1993  Ian Lance Taylor  (ian@cygnus.com)
 935
 936         * Makefile.in (DEMANGLER_PROG): Name it c++filt.
 937         (PROG): Also build and install COPY_PROG.
 938
 939 Mon May  3 19:11:48 1993  Per Bothner  (bothner@cygnus.com)
 940
 941         * Makefile.in:  Change definition of $(tooldir) to match FSF.
 942
 943 Wed Apr 28 23:41:32 1993  David J. Mackenzie  (djm@rtl.cygnus.com)
 944
 945         * size.c (usage): Add missing options.
 946         (main): Clean up option parser.
 947
 948         * objdump.c (usage): Add missing options.
 949         (display_file): Print program name before calling
 950         bdf_perror.
 951
 952         * nm.c (usage): Add missing options.
 953         (main): Clean up option parser.
 954         (display_file): Print program name before calling
 955         bdf_perror.
 956
 957         * copy.c (copy_usage, strip_usage): Add missing options.
 958
 959         * ar.c (usage): New function.
 960         (main): Call it.
 961         (open_inarch, do_quick_append): Print program name before calling
 962         bdf_perror.
 963
 964 Thu Apr 22 15:01:35 1993  Ian Lance Taylor  (ian@cygnus.com)
 965
 966         * nm.c (main): Accept and ignore -A and -B for MIPS compatibility.
 967
 968 Mon Apr 19 14:06:59 1993  Rob Savoye  (rob@cygnus.com)
 969
 970         * Makefile.in: Added FLAGS_TO_PASS so tests get run on freshly
 971         built binaries if they exist. (otherwise the path)
 972
 973 Wed Apr  7 22:22:50 1993  Rob Savoye  (rob@cygnus.com)
 974
 975         * Makefile.in: Changed check target to use DejaGnu.
 976
 977 Thu Apr  1 12:37:13 1993  Jim Kingdon  (kingdon@cygnus.com)
 978
 979         * Makefile.in: Remove am29k-pinsn.c, i960-pinsn.c.
 980         objdump.c: a29k and i960 are `disassemble' not `print'.
 981
 982         * objdump.c: Rename print_address to objdump_print_address
 983         and change parameters.
 984         (disassemble_data): Use objdump_print_address.
 985
 986 Wed Mar 31 10:25:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 987
 988         * objdump.c (disassemble_data): print_insn_sparc is now a
 989         `disassemble' not a `print'.
 990         Makefile.in: Remove sparc-pinsn.c (now in libopcodes.a).
 991
 992         * objdump.c (disassemble_data): Use new read_memory_func stuff.
 993
 994 Thu Mar 25 10:38:11 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
 995
 996         * objdump.c (fprintf): Declaration of variadic function had better
 997         be a prototype for ANSI C systems.
 998
 999 Mon Mar 22 23:19:46 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1000
1001         * Makefile.in: rename test-install to install-check
1002
1003 Fri Mar 19 14:40:08 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1004
1005         * objdump.c (disassemble_data): Add H8500.
1006
1007 Fri Mar 19 10:56:51 1993  Jim Kingdon  (kingdon@cygnus.com)
1008
1009         * objdump.c (usage): Mention long options.
1010
1011 Thu Mar 18 14:22:17 1993  Per Bothner  (bothner@rtl.cygnus.com)
1012
1013         * nm.c:  Modify behavior of -o flag for archives to match
1014         BSD4.4 and Sunos 4:  Prefix archive name before each line.
1015
1016         * m68k-pinsn.c:  Removed.  Subsumed by ../opcodes/m68k-dis.c.
1017         * i386-pinsn.c:  Removed.  Subsumed by ../opcodes/i386-dis.c.
1018         * Makefile.in:  Adjust accordingly.
1019         * objdump.c:  Support new-style disassemblers (ones that use
1020         the interface of ../include/dis-asm.h).
1021
1022 Thu Feb 25 15:57:00 1993  Per Bothner  (bothner@rtl.cygnus.com)
1023
1024         * Makefile.in:  When making tar file, remove texinfo/*,
1025         except for texinfo/texinfo.tex.
1026         * ardup.c:  Add extern declaration of strdup.
1027         * Makefile.in (testsuite):  Add 'else true' since otherwise
1028         Ultrix /bin/sh complains.
1029
1030 Wed Feb 24 19:44:18 1993  Per Bothner  (bothner@rtl.cygnus.com)
1031
1032         * Makefile.in:  Set VERSION to 2.1.
1033         * README, NEWS: Updates.
1034         * nm.c:  Add -v as a synonym for -V.
1035
1036 Tue Feb 23 19:00:50 1993  Mike Werner  (mtw@poseidon.cygnus.com)
1037
1038         * configure.in: added testsuite to configdirs.
1039         * Makefile.in: added support for building testsuite.
1040
1041 Mon Feb 22 22:52:10 1993  Per Bothner  (bothner@rtl.cygnus.com)
1042
1043         * objdump.c (disassemble_data):  Print function names when
1044         given by bfd_find_nearest_line.  If not - still print
1045         line numbers.
1046
1047 Mon Feb 22 07:54:03 1993  Mike Werner  (mtw@poseidon.cygnus.com)
1048
1049         * binutils/testsuite: made modifications to testcases, etc., to allow
1050         them to work properly  given the reorganization of deja-gnu and the
1051         relocation of the testcases from deja-gnu to a "tool" subdirectory.
1052
1053 Mon Feb 22 10:27:24 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1054
1055         * objdump.c (dump_data): Free up section contents each time
1056         through the loop.  Reported by minyard@bnr.ca.
1057
1058 Sun Feb 21 10:55:55 1993  Mike Werner  (mtw@poseidon.cygnus.com)
1059
1060         * binutils/testsuite: Initial creation of binutils/testsuite.
1061         Migrated dejagnu testcases and support files for testing nm to
1062         binutils/testsuite from deja-gnu.  These files were moved "as is"
1063         with no modifications.  This migration is part of a major overhaul
1064         of dejagnu.  The modifications to these testcases, etc., which
1065         will allow them to work with the new version of dejagnu will be
1066         made in a future update.
1067
1068 Fri Feb 12 10:05:20 1993  Fred Fish  (fnf@cygnus.com)
1069
1070         * Makefile.in (LIBIBERTY_SRC_DIR, LIBIBERTY_BIN_DIR): New macros.
1071         * Makefile.in (LIBIBERTY):  Use LIBIBERTY_BIN_DIR.
1072         * Makefile.in (DEMANGLER_PROG):  New program to build.  Add macro
1073         and rule.
1074         * Makefile.in (PROGS):  Add DEMANGLER_PROG.
1075
1076 Tue Jan 26 11:56:33 1993  Ian Lance Taylor  (ian@cygnus.com)
1077
1078         * copy.c, nm.c, objdump.c, size.c: Use new bfd_is_com_section
1079         macro rather than checking for equality to bfd_com_section.
1080
1081 Fri Jan  8 15:50:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1082
1083         * objdump.c (disassemble_data): Fix code to find first useless
1084         symbol.
1085
1086 Thu Jan  7 13:13:31 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1087
1088         * objdump.c (disassemble_data): Use mips_print_insn for MIPS.
1089         Don't core dump if bfd_find_nearest_line returns false.
1090
1091 Wed Jan  6 17:14:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1092
1093         * objdump.c (disassemble_data): know how to disassemble z8000s
1094         too.
1095
1096 Wed Jan  6 15:16:27 1993  Per Bothner  (bothner@cygnus.com)
1097
1098         * arsup.h (interactive), bucomm.h (program_name):  Prefix
1099         with 'extern', to avoid warnings from some compilers.
1100
1101 Wed Jan  6 15:14:11 1993  Per Bothner  (bothner@rtl.cygnus.com)
1102
1103         * arparse.y: fix unnecessary shift/reduce
1104
1105 Tue Dec 22 15:46:56 1992  Per Bothner  (bothner@rtl.cygnus.com)
1106
1107         * Makefile.in:  Make check depend on all.
1108         * Makefile.in (distclean): Remove sysdep.h.
1109         * size.c:  Use %u format where appropriate.
1110         * objdump.c:  Standardize:  L_SET -> SEEK_SET.
1111         * objdump.c:  Use new macro bfd_asymbol_bfd.
1112         * configure.in:  Allow std-host as the default ${mys_host}.
1113
1114 Thu Dec 17 19:38:19 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1115
1116         * Makefile.in: added dvi target, define and use TEXI2DVI
1117
1118 Tue Dec 15 18:05:07 1992  Per Bothner  (bothner@cygnus.com)
1119
1120         * Makefile.in (dist):  Fix permissions before release.
1121         * size.c:  Use bfd_size_type (and long) where appropriate.
1122         * ar.c:  Make writing a map the default, to be compatible
1123         with SYSV and Posix.2.  Remove some bogus kludges that
1124         handled __.SYMDEF directly.
1125         * NEWS:  New file.
1126
1127 Mon Nov  9 13:36:53 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1128
1129         * Makefile.in: flex no longer needs the -S flag
1130
1131 Sat Nov  7 15:06:13 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1132
1133         * ar.c (extract_file): utime needs a pointer to a utimbuf
1134
1135         * Makefile.in: handle -I includes better, adding $(BASEDIR)/bfd to
1136         the list (since some of the bfd/hosts/*.h files include other
1137         files from that directory)
1138
1139 Fri Nov  6 00:12:51 1992  John Gilmore  (gnu@cygnus.com)
1140
1141         * i960-pinsn.c (MEM_MAX, MEM_SIZ):  Set upper bound properly.
1142
1143 Thu Nov  5 03:37:15 1992  John Gilmore  (gnu@cygnus.com)
1144
1145         Clean up some old BFD ansification macros.
1146
1147         * arsup.h, bucomm.h, objdump.h:  Remove EXFUN from binutils.
1148         It still remains as a local macro in gmalloc.c, which is derived
1149         from some other copy of GNU Malloc somewhere (FIXME).
1150
1151         * ar.c, objdump.c, size.c:  Replace EXFUN with PROTO.  Make static
1152         fns really static.
1153         * arsup.h:  Declare extract_files.
1154
1155 Mon Nov  2 12:42:11 1992  Ian Lance Taylor  (ian@cygnus.com)
1156
1157         * ar.c (extract_file): instead of checking USG: if POSIX_UTIME,
1158         use utime and utimbuf structure, otherwise if USE_UTIME use utime
1159         and array of two longs, otherwise use utimes.
1160
1161 Thu Oct 15 13:57:35 1992  Per Bothner  (bothner@cygnus.com)
1162
1163         * binutils.tex:  Document yesterday's changes to strip and copy.
1164
1165 Wed Oct 14 13:22:14 1992  Per Bothner  (bothner@cygnus.com)
1166
1167         * copy.c:  Re-do command-line parsing to use getopt_long().
1168         Add long option names.  Re-think option letters to be more
1169         consistent.
1170         * copy.c:  New function filter_symbols() for stripping only
1171         debug-symbols and/or local symbols.  Use these to support
1172         the previously-missing options of the old FSF strip.
1173
1174 Tue Oct 13 01:24:20 1992  John Gilmore  (gnu@cygnus.com)
1175
1176         * configure.in (host):  Use ${srcdir}/../bfd/configure.host rather
1177         than repeating a copy of it here.
1178
1179 Wed Oct  7 12:53:52 1992  Ken Raeburn  (raeburn@cygnus.com)
1180
1181         * copy.c (main): Even if is_strip, accept -d argument indicating
1182         alternate output format.  Needed by gdb for Nindy.
1183
1184         * m68k-pinsn.c (print_insn_arg): Handle new "`" operand type.
1185
1186 Tue Oct  6 16:33:56 1992  Jeffrey Osier  (jeffrey@cygnus.com)
1187
1188         * binutils.texi:  added documentation for "copy"
1189
1190 Tue Oct  6 14:22:56 1992  Per Bothner  (bothner at PersSony)
1191
1192         * Makefile.in (*clean rules): Some cleaning up.
1193         * Makefile.in (dist): Make diststuff in gprof for a dist.
1194
1195         * ar.c (do_show_version):  New function.
1196         * ar.c (main):  Fix so "ar -V" works.
1197
1198 Thu Oct  1 22:44:45 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1199
1200         * configure.in: now uses the cpu-vendor-os triple instead of
1201         nested cases.
1202
1203 Fri Sep 25 22:41:08 1992  John Gilmore  (gnu@cygnus.com)
1204
1205         * i960-pinsn.c:  Change bzero to memset.
1206         * sparc-pinsn.c:  Change index to strchr.
1207
1208 Mon Sep 21 14:39:56 1992  Ian Lance Taylor  (ian@cygnus.com)
1209
1210         * m68k-pinsn (print_insn_arg, fetch_arg): added support for
1211         operands to memory management instructions, from WRS.
1212
1213 Tue Sep 15 15:26:38 1992  Ian Lance Taylor  (ian@cygnus.com)
1214
1215         * Makefile.in (install): if $(tooldir) exists, install nm and
1216         strip in $(tooldir)/bin.
1217
1218 Thu Sep  3 11:57:40 1992  Per Bothner  (bothner@rtl.cygnus.com)
1219
1220         * Makefile.in:  Let's call it version 2.0.
1221
1222 Wed Sep  2 00:25:13 1992  Per Bothner  (bothner@rtl.cygnus.com)
1223
1224         * Makefile.in:  Bump to version 0.98.
1225         * TODO, README:  Minor updates.
1226
1227         * Makefile.in:  Added mostlyclean, distclean rules,
1228         and cleaned up clean, realclean.
1229
1230 Sun Aug 30 21:18:59 1992  Ian Lance Taylor  (ian@cygnus.com)
1231
1232         * Makefile.in: map program names through program_transform_name
1233         when installing.
1234
1235 Sun Aug 30 18:09:03 1992  Per Bothner  (bothner@rtl.cygnus.com)
1236
1237         * Makefile.in:  Bump to versions 1.97.90.
1238         * cplus-dem.c:  Removed.  Was nowhere used - and if some
1239         programs are changed to to demangling should now use the
1240         versions in libiberty.
1241
1242 Thu Aug 27 12:58:09 1992  Brendan Kehoe  (brendan@cygnus.com)
1243
1244         * configure.in: add we32k
1245
1246 Mon Aug 24 14:53:42 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1247
1248         * ar.c (map_over_members): if the element of the archive has a
1249         null name, fill it in.
1250
1251         * nm.c (do_one_rel_file): only warn if a bfd's flags say there
1252         will be symbols and there aren't any.
1253
1254 Wed Aug 19 11:20:25 1992  Ian Lance Taylor  (ian@cygnus.com)
1255
1256         * m68k-pinsn.c: handle new operand type 'r', introduced for cas2.
1257
1258 Tue Aug 18 20:45:48 1992  Rob Savoye  (rob@cygnus.com)
1259
1260         * nm.c objdump.c: Added support for a +version (-V)
1261         to print the version number.
1262
1263         * ar.c, copy.c: Added support for a -V option to print
1264         the version number.
1265
1266 Tue Aug 18 13:28:44 1992  Ian Lance Taylor  (ian@cygnus.com)
1267
1268         * config/mh-apollo68v: removed -g from CC definition.
1269
1270         * Makefile.in: always create installation directories.
1271
1272 Mon Aug 17 18:33:41 1992  Per Bothner  (bothner@rtl.cygnus.com)
1273
1274         * m68k-pinsn.c:  Minor fix in style of output (don't use
1275         range to indicate floating point control registers).
1276
1277 Tue Aug 11 23:42:21 1992  Per Bothner  (bothner@cygnus.com)
1278
1279         * ar.c (main):  Don't *always* set the verbose flag!
1280
1281 Wed Aug  5 11:25:27 1992  Per Bothner  (bothner@rtl.cygnus.com)
1282
1283         * copy.c:  When is_strip (because it is invoked as the strip
1284         program), follow traditional argv processing:
1285         'strip file1 file2' now strips file1 and file2, rather
1286         than stripping file1 (as input), leaving output in file2.
1287
1288 Mon Jul 27 16:28:08 1992  Per Bothner  (bothner@rtl.cygnus.com)
1289
1290         * objdump.c (display_info, display_info_table):  Call
1291         bfd_set_format() on dummy bfd before using it (twice).
1292         * ar.c:  Make sure archive is created on command 'r'
1293         even when no elements are inserted.  (Clean up and
1294         simplify some non-working related code.)
1295
1296 Mon Jul 20 02:48:38 1992  D. V. Henkel-Wallace  (gumby@cygnus.com)
1297
1298         * configure.in: hppa support doesn't assume hp OS (from sef).
1299
1300 Sat Jul 18 14:35:22 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1301
1302         * configure.in: recognize hppa hosts (bsd & hpux), error messages
1303         to stderr, not stdout
1304
1305 Fri Jul 17 18:39:44 1992  K. Richard Pixley  (rich@rtl.cygnus.com)
1306
1307         * ar.1, binutils.texi, i960-pinsn.c, nm.1, objdump.1, ranlib.1,
1308           size.1, sparc-pinsn.c, strip.1: removed rcsid's.
1309
1310 Thu Jul 16 16:55:24 1992  K. Richard Pixley  (rich@rtl.cygnus.com)
1311
1312         * Makefile.dos: removed rcsid.
1313
1314 Thu Jul 16 08:23:07 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1315
1316         * objdump.c (display_bfd): print state of BFD_IS_RELAXABLE too
1317
1318 Tue Jun 30 20:26:15 1992  D. V. Henkel-Wallace  (gumby@cygnus.com)
1319
1320         * Makefile.in: Add program_suffix (parallel to program_prefix)
1321
1322 Thu Jun 25 04:52:45 1992  John Gilmore  (gnu at cygnus.com)
1323
1324         * nm.c (sorters):  Lint.  Remove excess whitespace.
1325
1326 Wed Jun 24 13:48:07 1992  Per Bothner  (bothner@cygnus.com)
1327
1328         * nm.c (valueof macro):  Add missing parentheses.
1329         (Their lack screwed up numeric_forward().)
1330
1331 Sun Jun 14 10:33:27 1992  John Gilmore  (gnu at cygnus.com)
1332
1333         * objdump.c (dump_elf_stabs):  Also dump .stab.index and
1334         .stab.excl sections.
1335         (dump_elf_stabs_1):  Split out main body of old dump_elf_stabs.
1336         * objdump.1, binutils.texi:  Document new sections dumped.
1337
1338 Fri Jun 12 22:23:35 1992  John Gilmore  (gnu at cygnus.com)
1339
1340         * size.c, objdump.c, bucomm.c:  Lint.
1341
1342 Thu Jun 11 01:19:06 1992  John Gilmore  (gnu at cygnus.com)
1343
1344         * objdump.c (dump_elf_stabs): New feature: --stabs prints out a
1345         .stab section from an ELF file.  Installed under #ifdef
1346         ELF_STAB_DISPLAY so it can be easily disabled, since it requires
1347         bfd-internals header files and such.
1348         * objdump.1, binutils.texi:  Update for --stabs.  Also fix
1349         objdump's doc to use -- rather than + for long options.
1350         (FIXME:  Not yet fixed everywhere in binutils.texinfo.)
1351
1352 Wed Jun 10 07:53:24 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1353
1354         * objdump.c(display_info), patches from
1355         mohring@informatik.tu-muenchen.de to print the table much more
1356         nicely.
1357
1358 Thu May 28 13:36:16 1992  Per Bothner  (bothner@rtl.cygnus.com)
1359
1360         * objdump.c:  Add another enum->int cast, for the sake of
1361         old compilers (such as PCC).
1362
1363 Wed May 27 13:01:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
1364
1365         * arlex.l:  Don't include <sysdep.h> (unneeded conflicts).
1366         Add declaration of strdup().
1367
1368 Fri May 22 13:40:37 1992  Per Bothner  (bothner@cygnus.com)
1369
1370         * Makefile.in:  Use srcdir instead of VPATH in ldgram/ldlex
1371         rules, since these are used when building a distribution.
1372         * Makefile.in (arlex.c):  Don't re-direct output, since that
1373         leaves a bogus output files if it fails.
1374
1375         * arlex.l:  Make work with lex, for what it's worth.
1376         * Makefile.in:  Better lex support.
1377         * Makefile.in (dist):  Generate flex and bison outputs
1378         for distribution.
1379
1380 Thu May 14 17:17:59 1992  K. Richard Pixley  (rich@rtl.cygnus.com)
1381
1382         * Makefile.in: get BISON definition right.
1383
1384 Fri May  8 07:47:08 1992  K. Richard Pixley  (rich@cygnus.com)
1385
1386         * sanity.sh: default TMPDIR to ".".
1387
1388 Thu May  7 12:34:50 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
1389
1390         * binutils.texi: add doc for ar command language.
1391
1392 Wed May  6 18:05:36 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1393
1394         * arparse.y: make END call ar_end
1395         * arsup.c (ar_end): added, deletes temp file if archive session
1396         aborted.
1397
1398
1399 Wed May  6 11:08:53 1992  K. Richard Pixley  (rich@rtl.cygnus.com)
1400
1401         * Makefile.in: use bison & flex from ../ if they exist.  Also,
1402           FLEX->LEX.
1403
1404         * sanity.sh: remove temporary directory when finished.
1405
1406 Tue May  5 12:00:58 1992  Per Bothner  (bothner@rtl.cygnus.com)
1407
1408         * Makefile.in:  Bump to version 1.97.
1409         * ar.c:  Declare errno for machines that need it.
1410
1411 Mon May  4 23:29:51 1992  John Gilmore  (gnu@cygnus.com)
1412
1413         * objdump.c (display_info):  Handle error cases without coredump.
1414         Close the dummy temporary file we open in the loop.
1415         * Makefile.in (arsup.o):  Add kludge to build with Sun Make.
1416
1417 Fri May  1 16:20:23 1992  K. Richard Pixley  (rich@cygnus.com)
1418
1419         * Makefile.in: added test-install target.
1420
1421         * sanity.sh: new file.
1422
1423         * Makefile.in: use sanity test on make check.
1424
1425 Tue Apr 21 13:38:37 1992  K. Richard Pixley  (rich@cygnus.com)
1426
1427         * Makefile.in: rework CFLAGS so that they can be passed on the
1428           command line to make.  Remove MINUS_G.  Default CFLAGS to -g.
1429
1430 Wed Apr 15 14:33:07 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1431
1432         * arsup.c, arsup.h, arparse.y, arlex.l: support for archive
1433         scripting language.
1434
1435 Fri Mar  6 21:54:53 1992  K. Richard Pixley  (rich@cygnus.com)
1436
1437         * Makefile.in: added check target.
1438
1439 Thu Mar  5 21:35:49 1992  K. Richard Pixley  (rich@cygnus.com)
1440
1441         * Makefile.in: added clean-info target.
1442
1443 Tue Mar  3 15:36:37 1992  K. Richard Pixley  (rich@rtl.cygnus.com)
1444
1445         * Makefile.in: remove $(COPY_PROG) from PROGS.  It shouldn't be
1446           installed. added tooldir and program_prefix.
1447
1448 Wed Feb 26 18:04:40 1992  K. Richard Pixley  (rich@cygnus.com)
1449
1450         * Makefile.in, configure.in: removed traces of namesubdir,
1451           -subdirs, $(subdir), $(unsubdir), some rcs triggers.  Forced
1452           copyrights to '92, changed some from Cygnus to FSF.
1453
1454 Sun Feb 16 12:53:02 1992  Per Bothner  (bothner at cygnus.com)
1455
1456         * Makefile.in:  Bump version to 1.96, and remove -beta
1457         suffix from distribution name.
1458         * m68k-pinsn.c:  New macro COERCE_SIGNED_CHAR to extract
1459         the signed value of a character (even if chars are unsigned).
1460         * sparc-pinsn.c:  Add new operand types.
1461
1462 Thu Feb  6 12:14:19 1992  Steve Chamberlain  (sac at rtl.cygnus.com)
1463
1464         * objdump.c (disassemble_data): don't print a section's contents
1465         if it's not loadable (eg bss)
1466
1467 Tue Jan 28 11:11:06 1992  Steve Chamberlain  (sac at rtl.cygnus.com)
1468
1469         * m68k-pinsn.c (print_insn_arg): fixed so that -ve branch
1470         displacements don't get printed as large +ve ones.
1471
1472 Fri Jan 24 14:47:53 1992  Steve Chamberlain  (sac at rtl.cygnus.com)
1473
1474         * copy.c, nm.c, objdump.c, size.c : changed to use the
1475         new reloc scheme.
1476
1477
1478 Mon Dec 30 18:34:41 1991  Per Bothner  (bothner at cygnus.com)
1479
1480         * bucomm.c (print_arelt_descr):  Tweek the output format
1481         so that 'ar tv' output follows Posix 1003.2/D11.
1482         Output is now also identical to Sun's (except __.SYMDEF).
1483
1484 Mon Dec 30 06:09:53 1991  John Gilmore  (gnu at cygnus.com)
1485
1486         * Makefile.in:  Make `make' output more readable.
1487
1488 Wed Dec 18 15:04:45 1991  Per Bothner  (bothner at cygnus.com)
1489
1490         * Makefile.in:  Bump to version 1.94.
1491
1492 Wed Dec 11 16:48:09 1991  Steve Chamberlain  (sac at cygnus.com)
1493
1494         * ar.c: added "b" to fopens for dos
1495         * configdj.bat, makefile.dos new files from DJ
1496
1497 Tue Dec 10 04:07:26 1991  K. Richard Pixley  (rich at rtl.cygnus.com)
1498
1499         * Makefile.in: infodir belongs in datadir.
1500
1501 Sat Dec  7 17:09:37 1991  Steve Chamberlain  (sac at rtl.cygnus.com)
1502
1503         * bucomm.h: created to hold prototypes of bucomm.c
1504         * objdump.h: created to hold prototyes of objdump.c
1505         * am29k-pinsn.c: include objdump.h
1506         * ar.c: include bucomm.h, get ar.h from the right place and
1507         include libbfd.h
1508         * bucomm.c: defunize bfd_fatal
1509         * copy.c: include bucomm.h, lint.
1510         * i960-pinsn.h: include bucomm.h
1511         * m68k-pinsn.h: lint
1512         * nm.c: include bucomm.h, lint
1513         * objdump.c: lint
1514         * sparc-pinsn.c: include objdump.h
1515
1516
1517
1518 Fri Dec  6 23:02:14 1991  K. Richard Pixley  (rich at rtl.cygnus.com)
1519
1520         * Makefile.in: added standards.text support.  install using
1521           INSTALL_PROGRAM and INSTALL_DATA.
1522
1523         * configure.in: configure now does all of it's work from objdir so
1524           make file existence tests against ${srcdir}.
1525
1526 Thu Dec  5 22:46:22 1991  K. Richard Pixley  (rich at rtl.cygnus.com)
1527
1528         * Makefile.in: idestdir and ddestdir go away.  Added copyrights
1529           and shift gpl to v2.  Added ChangeLog if it didn't exist. docdir
1530           and mandir now keyed off datadir by default.
1531
1532 Wed Dec  4 22:42:03 1991  Per Bothner  (bothner at cygnus.com)
1533
1534         * Makefile.in:  Bump to version 1.93.
1535         * Makefile.in:  Add make-strip.o:maybe-strip.c dependency
1536         for make versions that provide half-baked VPATH-support (e.g. Sun's).
1537         * size.c:  Improvements suggested by
1538         "david d [zoo] zuhn" <zoo@aps1.spa.umn.edu>:
1539         - Don't emit (Berkeley) headers if no files were found.
1540         - Return a non-zero return code on failure.
1541
1542 Sat Nov 30 21:34:19 1991  Steve Chamberlain  (sac at rtl.cygnus.com)
1543
1544         Changes due to include file renaming:
1545         * am29k-pinsn.c: a29k-opcode.h  -> opcode/a29k.h
1546         * sparc-pinsn.c: sparc-opcode.h -> opcode/sparc.h
1547         * m68k-pinsn.c:  m68k-opcode.h  -> opcode/m68k.h
1548         * nm.c:          stab.gnu.h     -> aout/stab_gnu.h
1549
1550 Tue Nov 19 19:20:43 1991  Per Bothner  (bothner at cygnus.com)
1551
1552         * README:  Mention MINIMIZE flag for bfd's make.
1553
1554 Mon Nov 18 12:05:37 1991  Per Bothner  (bothner at cygnus.com)
1555
1556         * README:  Various improvements.
1557
1558 Sun Nov 17 23:40:59 1991  Per Bothner  (bothner at cygnus.com)
1559
1560         * Makefile.in:  Bump to version 1.92.
1561         * version.c, Makefile.in:  Get version string from Makefile.
1562         * copy.c, is-strip.c, not-strip.c, maybe-strip.c, Makefile.in:
1563         Make the same change that we earlier did for ar/ranlib:
1564         Generate two different binaries for strip and copy and use
1565         a global variable with different values to distinguish
1566         ostrip from copy.  (-1 means to use argv[0] to decide,
1567         so you can get the old behavior, but it is no longer the default).
1568         * copy.c (copy_file):  Set EXEC_P of output bfd if input is so.
1569         * copy.c (main):  If is_strip==-1, compare last 5 chars
1570         of argv[0], not the whole path.
1571         * copy.c (main): Return 0, not 1.
1572         * copy.c (setup_sections):  Fix due to change in bfd_make_section
1573         now failing if asked for a duplicate section.
1574         * strip.c, ostrip.c:  Removed obsolete files.
1575         * ar.c, not-ranlib.c, maybe-ranlib.c:
1576         Change encoding of is_ranlib variable to be consistent
1577         with is_strip for strip.copy (i.e -1 to means use argv[0]).
1578
1579 Thu Nov 14 20:11:02 1991  Per Bothner  (bothner at cygnus.com)
1580
1581         * version.c (program_version): Update to version 1.92.
1582
1583 Tue Nov 12 16:17:53 1991  Per Bothner  (bothner at cygnus.com)
1584
1585         * ar.c (get_pos_bfd):  Previous fix was missing a "break".
1586
1587 Thu Nov  7 08:55:56 1991  Steve Chamberlain  (sac at cygnus.com)
1588
1589         * am29k-pinsn.c: Fixed bug in mtacc, dmac and fmac instruction
1590         encodings. (Thaks to David Wood)
1591
1592 Sun Nov  3 14:50:23 1991  Per Bothner  (bothner at cygnus.com)
1593
1594         * Makefile.in ($(DIST_NAME).tar.Z), TODO:  Various fixes.
1595         * ar.c (get_pos_bfd): Fix to handling of before/after
1596         positioning options.
1597         * bucomm.c (fatal):  MISSING_VFPRINTF is no longer an issue,
1598         since libiberty contains vfprintf etc if otherwise missing.
1599         * m68k-pinsn.c (print_insn_arg):  Support BB/BW/BL
1600         type operands, as used by branch instructions.
1601         * nm.c:  Delegate printing of symbols to BFD,
1602         by using bfd_print_symbol to do the formatting.
1603
1604 Mon Oct 28 11:20:47 1991  Steve Chamberlain  (steve at cygnus.com)
1605
1606         * ar.c (write_archive.c): added unlink before rename since some
1607         systems can't rename onto an existant file.
1608
1609 Mon Oct 21 09:47:23 1991  Steve Chamberlain  (steve at rtl.cygnus.com)
1610
1611         * nm.c: now doesn't crash if a symbol with no section and no
1612         SEC_ABS appears.
1613
1614 Thu Oct 17 15:25:50 1991  Per Bothner  (bothner at cygnus.com)
1615
1616         * Makefile.in, version.c:  Bump to version 1.91.
1617
1618 Wed Oct 16 11:45:36 1991  Per Bothner  (bothner at cygnus.com)
1619
1620         * Makefile.in, ar.c, bucomm.c, copy.c, cplus-dem.c, filemode.c,
1621         i960-pinsn.c, m68k-pinsn.c, nm.c, objdump.c, size.c, sparc-pinsn.c,
1622         * strip.c: Add or update Copyright notice.
1623         * TODO:  Add note on 'nm -a'.
1624         * version.c: Update version number to 1.90.
1625         * Makefile.in: Fix making of documentation for dist.
1626
1627 Tue Oct 15 00:17:17 1991  Per Bothner  (bothner at cygnus.com)
1628
1629         * README: New file.
1630         * Makefile.in: New kludgy rules for making a tarfile.
1631         * Makefile.in: Fix bindir path.
1632
1633 Mon Oct 14 17:34:29 1991  Roland H. Pesch  (pesch at cygnus.com)
1634
1635         * Makefile.in: add targets binutils.mm, binutils.me
1636
1637 Fri Oct 11 22:44:21 1991  John Gilmore  (gnu at cygnus.com)
1638
1639         * Makefile.in:  Avoid Sun Make VPATH bugs by adding dependencies.
1640
1641 Fri Oct 11 12:51:33 1991  Roland H. Pesch  (pesch at cygnus.com)
1642
1643         * Makefile.in: add target "binutils.ms"
1644
1645         * binutils.texinfo: minor restructuring for texi2roff comfort.
1646
1647 Fri Oct 11 04:12:28 1991  John Gilmore  (gnu at cygnus.com)
1648
1649         Restructure configuration scheme for bfd, binutils, ld.
1650
1651         * include/sys/h-*.h:  Move to bfd/hosts/h-*.h.
1652         * configure.in:  Revise to symlink sysdep.h to ../bfd/hosts/h-xxx.h.
1653         Change some config names to match other dirs.
1654         * *.c:  Include bfd.h before sysdep.h, so ansidecl and PROTO()
1655         get defined first.
1656         * Makefile.in:  Use -I. to get sysdep.h.
1657
1658 Wed Oct  9 22:42:56 1991  Per Bothner  (bothner at cygnus.com)
1659
1660         * nm.c (print_symbols):  Handle NULL name field of symbol.
1661         * Makefile.in: Removed spurious comment.
1662
1663 Tue Oct  8 16:55:03 1991  Roland H. Pesch  (pesch at cygnus.com)
1664
1665         * binutils.texinfo: minor typos, phrasing, formatting fixes.
1666
1667 Tue Oct  8 15:13:20 1991  Per Bothner  (bothner at cygnus.com)
1668
1669         * configure.in: Get host file from ../bfd/config, not config.
1670         * config/*: Remove config directory and its files.
1671
1672 Tue Oct  8 13:58:59 1991  Roland H. Pesch  (pesch at cygnus.com)
1673
1674         * Makefile.in: new targets binutils.dvi, binutils.info
1675
1676         * binutils.texinfo: remove most remaining FIXME's, delete
1677         references to __.SYMDEF by name
1678
1679
1680 Tue Oct  8 10:23:44 1991  Steve Chamberlain  (steve at cygnus.com)
1681
1682         * objdump.c (print_address) Print addresses nicely.
1683
1684 Mon Oct  7 11:31:05 1991  Per Bothner  (bothner at cygnus.com)
1685
1686         * ar.c, Makefile.in, new files {is,not,maybe}-ranlib.c:
1687         Make two different binaries for ar and ranlib, instead of
1688         distinguishing them at run time using argv[0].
1689         (Old behavior is still available if you "make ar_with_ranlib",
1690         but it is not the default.)
1691         * ranlib.sh (new):  An alternative one-line
1692         shell implementation of ranlib.
1693
1694 Fri Oct  4 21:49:44 1991  John Gilmore  (gnu at cygnus.com)
1695
1696         * objdump.c:  Cope with renames of a few BFD types & enums.
1697
1698 Fri Oct  4 19:08:09 1991  Roland H. Pesch  (pesch at cygnus.com)
1699
1700         * binutils.texinfo: add new file (rudimentary docn)
1701
1702 Mon Sep 30 12:30:39 1991  Per Bothner  (bothner at cygnus.com)
1703
1704         * config/hmake-news: Add new file (for Sony NEWSOS3).
1705         * bucomm.c (fatal):  Conditionally compile fatal() depending on
1706         MISSING_VFPRINTF, and don't confuse the issue with NO_VARARGS.
1707         * objdump.c (dump_headers):  Trivial output format change.
1708         * objdump.c (display_info): Loop over integers, not enums,
1709         to appease old compilers.
1710
1711 Mon May 20 16:14:07 1991  Steve Chamberlain  (steve at cygint.cygnus.com)
1712
1713         *objdump.c *nm.c *copy.c :hanged some types to work with 64 bit object files
1714
1715 Thu May 16 16:06:55 1991  Steve Chamberlain  (steve at cygint.cygnus.com)
1716      from bother
1717         * objdump.c (print_address): Make disasembled output more
1718         consistent with gdb and as: Add 0x when printing hex.
1719         Don't print extra leading zeros.
1720         Attempt to not print "filename.o".
1721         * objdump.c: Add some enum-to-int casts to accomodate old compilers.
1722
1723
1724 Fri May  3 22:21:44 1991  John Gilmore  (gnu at cygint.cygnus.com)
1725
1726         * copy.c:  Change =& constructs to = &, since they confuse older
1727         C compilers.
1728
1729 \f
1730 Local Variables:
1731 version-control: never
1732 End: