1 2019-09-23 Alan Modra <amodra@gmail.com>
4 * dwarf.c (get_type_signedness): Delete ineffective pointer
5 comparison check. Properly range check uvalue offset on
7 (read_and_display_attr_value): Range check uvalue offset before
8 calling get_type_signedness.
10 2019-09-20 Alan Modra <amodra@gmail.com>
12 * ar.c (write_archive): Use bfd_set_thin_archive.
14 2019-09-18 Tamar Christina <tamar.christina@arm.com>
16 * testsuite/binutils-all/objdump.exp (objump -S): Update testcases.
18 2019-09-18 Alan Modra <amodra@gmail.com>
20 * addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c,
21 * objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c,
22 * od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c,
23 * resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update
24 throughout for bfd section macro and function changes.
26 2019-09-18 Alan Modra <amodra@gmail.com>
28 * nm.c: Update bfd_get_section to bfd_asymbol_section throughout.
29 * objcopy.c: Likewise.
30 * objdump.c: Likewise.
32 * objcopy.c (create_new_symbol): Use bfd_set_asymbol_name.
33 (filter_symbols): Likewise.
35 2019-09-18 Simon Marchi <simon.marchi@polymtl.ca>
37 * doc/Makefile.am (MOSTLYCLEANFILES): Clean all man pages,
38 cxxfilt.man and binutils.info.
39 (MAINTAINERCLEANFILES): Remove.
40 * doc/Makefile.in: Re-generate.
42 2019-09-18 Simon Marchi <simon.marchi@polymtl.ca>
44 * doc/Makefile.am: Remove references to binutils_TEXINFOS.
45 * doc/Makefile.in: Re-generate.
47 2019-09-18 Simon Marchi <simon.marchi@polymtl.ca>
49 * doc/Makefile.am (install-data-loca): Remove target.
50 (DISTCLEANFILES): Remove variable.
51 * doc/Makefile.in: Re-generate.
53 2019-09-18 Simon Marchi <simon.marchi@polymtl.ca>
55 * Makefile.in: Re-generate.
56 * configure: Re-generate.
57 * doc/Makefile.in: Re-generate.
59 2019-09-16 Phil Blundell <pb@pbcl.net>
61 * Makefile.in, configure. doc/Makefile.in: Regenerated.
63 2019-09-11 Tom Tromey <tom@tromey.com>
65 * objcopy.c (copy_archive): Update.
66 * bucomm.h (make_tempname, make_tempdir): Make argument const.
67 * bucomm.c (make_tempname, make_tempdir): Make argument const.
69 2019-09-11 Alan Modra <amodra@gmail.com>
72 * objdump.c (disassemble_bytes): Adjust code to avoid overlong
73 lines. Correct max_reloc_offset_into_insn test.
75 2019-09-10 Nick Clifton <nickc@redhat.com>
78 * objdump.c (null_print): New function.
79 (disassemble_bytes): Delete previous_octets local and replace with
80 a test of the max_reloc_offset_into_insn field of the
81 bfd_arch_info structure. If a reloc is a potential match for the
82 next insn, then perform a dummy disassembly in order to calculate
85 2019-09-09 Phil Blundell <pb@pbcl.net>
87 binutils 2.33 branch created.
89 2019-09-06 Alan Modra <amodra@gmail.com>
91 * nm.c (print_object_filename_bsd, print_object_filename_sysv),
92 (print_object_filename_posix, print_archive_filename_bsd),
93 (print_archive_filename_sysv, print_archive_filename_posix),
94 (print_archive_member_bsd, print_archive_member_sysv),
95 (print_archive_member_posix): Constify parameter.
96 (struct output_fns <print_object_filename, print_archive_filename>),
97 (<print_archive_member>): Likewise.
98 * objcopy.c (copy_archive): Add cast for make_tempdir.
100 2019-08-29 Alan Modra <amodra@gmail.com>
102 * dwarf.c (check_uvalue): Remove unnecessary pointer checks.
104 2019-08-28 Niklas Gürtler <profclonk@gmail.com>
107 * objcopy.c (SECTION_CONTEXT_SET_ALIGNMENT): New constant.
108 (struct section_list): Add alignment field.
109 (command_line_switch): Add OPTION_SET_SECTION_ALIGNMENT.
110 (copy_options): Add --set-section-alignment.
111 (copy_usage): Describe --set-section-alignment.
112 (find_section_list): Initialise the alignment field.
113 (setup_section): Handle the alignment field.
114 (copy_main): Handle OPTION_SET_SECTION_ALIGNMENT.
115 * doc/binutils.texi: Document the new feature.
116 * NEWS: Mention the new feature.
118 2019-08-28 Nick Clifton <nickc@redhat.com>
121 * objdump.c (source_comment): New static variable.
122 (option_values): Add OPTION_SOURCE_COMMENT.
123 (long_opions): Add --source-comment.
124 (print_line): If source comment is set, use it as a prefix to the
126 (main): Handle OPTION_SOURCE_COMMENT.
127 * doc/binutils.texi: Document the new option.
128 * NEWS: Mention the new feature.
129 * testsuite/binutils-all/objdump.exp (test_objdump_S): Add tests
130 of the -S and --source-comment options.
132 2019-08-27 Nick Clifton <nickc@redhat.com>
135 * dwarf.c (MAX_CU_NESTING): New constant.
136 (level_type_signed): New static array.
137 (skip_attr_bytes): New function.
138 (get_type_signedness): New function.
139 (read_and_print_leb128): New function.
140 (display_discr_list): New function.
141 (read_and_display_attr_value): Add start parameter.
142 Use new functions when handling DW_AT_type and DW_AT_discr_list.
143 (read_and_display_attr): Add start parameter. Pass to
144 read_and_display_attr_value.
145 (process_debug_info): Update call to read_and_display_attr.
146 (display_formatted_table): Likewise.
147 (display_debug_lines_decoded): Likewise. Also add start
149 (display_debug_lines): Likewise.
150 * testsuite/binutils-all/dwarf-attributes.S: Update discrimination
152 * testsuite/binutils-all/dwarf-attributes.W: Update expected
155 2019-08-26 Alan Modra <amodra@gmail.com>
158 * debug.c (debug_write_type): Call empty_type for NULL type here..
159 (debug_write_type): ..rather than in just one case here.
161 2019-08-23 Nick Clifton <nickc@redhat.com>
164 * dwarf.c (check_uvalue): New function. Ensures that a block's
166 (read_and_display_attr_value): Use check_value when processsing
167 DW_FORM_block<n> attributes.
169 2019-08-22 Nick Clifton <nickc@redhat.com>
172 * dwarf.c (process_cu_tu_index): Handle the case where a table
173 does not have any columns.
175 2019-08-19 Alan Modra <amodra@gmail.com>
178 * dwarf.c (display_debug_frames): Use the read_cie check and error
179 for augmentation data length.
181 2019-08-17 Alan Modra <amodra@gmail.com>
184 * dwarf.c (comp_addr_base): Dereference args.
186 2019-08-16 Alan Modra <amodra@gmail.com>
190 * readelf.c (get_symbol_version_string): Set sym_info earlier.
192 2019-08-15 Nick Clifton <nickc@redhat.com>
195 * doc/binutils.texi (nm): Document the 'n' symbol type.
197 2019-08-15 Christophe Vidal <support@krizalys.com>
199 * docs/binutils.texi: Fixed notice message disassembler options
200 section of the man page.
202 2019-08-09 Mihailo Stojanovic <mihailo.stojanovic@rt-rk.com>
204 * readelf.c (get_mips_dynamic_type): Return MIPS_XHASH dynamic type.
205 (get_mips_section_type_name): Return MI{S_XHASH name string.
206 (dynamic_section_mips_val): Initialize the .MIPS.xhash dynamic
208 (process_symbol_table): Initialize the .MIPS.xhash section
209 pointer. Adjust the readelf output to support the new section.
210 (process_object): Set the .MIPS.xhash dynamic info to zero.
212 2019-08-09 Tamar Christina <tamar.christina@arm.com>
214 * testsuite/binutils-all/arm/in-order-all.d: Skip on pe, wince, coff.
215 * testsuite/binutils-all/arm/in-order.d: Likewise.
216 * testsuite/binutils-all/arm/out-of-order-all.d: Likewise.
217 * testsuite/binutils-all/arm/out-of-order.d: Likewise.
219 2019-08-08 Nick Clifton <nickc@redhat.com>
222 * readelf.c (process_notes_at): Left justify the "Data size"
224 * testsuite/binutils-all/i386/empty.d: Adjust for new output format.
225 * testsuite/binutils-all/i386/ibt.d: Likewise.
226 * testsuite/binutils-all/i386/pr21231a.d: Likewise.
227 * testsuite/binutils-all/i386/pr21231b.d: Likewise.
228 * testsuite/binutils-all/i386/shstk.d: Likewise.
229 * testsuite/binutils-all/note-2-32.d: Likewise.
230 * testsuite/binutils-all/note-2-64.d: Likewise.
231 * testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
232 * testsuite/binutils-all/x86-64/empty.d: Likewise.
233 * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
234 * testsuite/binutils-all/x86-64/ibt.d: Likewise.
235 * testsuite/binutils-all/x86-64/pr21231a.d: Likewise.
236 * testsuite/binutils-all/x86-64/pr21231b.d: Likewise.
237 * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise.
238 * testsuite/binutils-all/x86-64/pr23494a.d: Likewise.
239 * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise.
240 * testsuite/binutils-all/x86-64/pr23494c.d: Likewise.
241 * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise.
242 * testsuite/binutils-all/x86-64/pr23494d.d: Likewise.
243 * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise.
244 * testsuite/binutils-all/x86-64/pr23494e.d: Likewise.
245 * testsuite/binutils-all/x86-64/shstk-x32.d: Likewise.
246 * testsuite/binutils-all/x86-64/shstk.d: Likewise.
248 2019-08-08 Nick Clifton <nickc@redhat.com>
250 * testsuite/gentestdlls.c (main): Move declaration of loop
251 variable outside of the for() statement.
253 2019-08-08 Jordan Rupprecht <rupprecht@google.com>
255 * readelf.c (process_note): Mask unknown description data bytes.
257 2019-08-08 Alan Modra <amodra@gmail.com>
259 * readelf.c (get_data): Improve overflow checks.
261 2019-08-07 Nick Clifton <nickc@redhat.com>
264 * doc/binutils.texi: Ensure consistent formating of title strings
265 for man pages. Extend the title of the size man page to be more
268 2019-08-07 Omair Majid <omajid@redhat.com>
270 * testsuite/binutils-all/objdump.exp
271 (test_objdump_dotnet_assemblies): Fix test to distinguish errors
272 in parsing simple pei-i386 and pei-x86-64 vs parsing the newly
273 introduced machine types.
274 * testsuite/gentestdlls.c (write_simple_dll): New function.
275 (main): Generate simple and Linux-specific variants of pei-i386
276 and pei-x86-64 files so both can be used by tests.
278 2019-08-07 Alan Modra <amodra@gmail.com>
281 * readelf.c (dump_ia64_unwind): Check that buffer is large
282 enough for "stamp" before reading.
284 2019-08-05 Nick Clifton <nickc@redhat.com>
287 * objcopy.c (merge_gnu_build_notes): Do not insist on the first
288 note being a version note.
289 Remove spurious debugging fprintf.
291 2019-08-05 Nick Clifton <nickc@redhat.com>
294 * readelf.c (apply_relocations): Catch potential integer overflow
295 whilst checking reloc location against section size.
297 2019-08-02 Alan Modra <amodra@gmail.com>
300 * readelf.c (ABSADDR): Delete.
301 (dump_ia64_unwind): Expand ABSADDR. Check validity of info.section.
303 2019-07-29 Martin Liska <mliska@suse.cz>
306 * nm.c (filter_symbols): Set report_plugin_err if
308 (display_rel_file): Report error for a missing LTO plugin.
310 2019-07-26 Alan Modra <amodra@gmail.com>
313 * dwarf.c (process_cu_tu_index): Avoid integer overflow on 64-bit
314 systems by casting ncols and nslots expressions to size_t. Display
315 number of columns and slots before giving up due to buffer overflow.
316 Use %u to display unsigned ints. Perform more pointer wrap tests.
318 2019-07-25 Tom Tromey <tromey@adacore.com>
321 * dwarf.c (display_debug_names): Display the contents of the
322 augmentation string, if it is printable.
324 2019-07-25 Nick Clifton <nickc@redhat.com>
327 * readelf.c (process_mips_specific): Check for buffer overflow
328 before reading reginfo information.
330 2019-07-24 Nick Clifton <nickc@redhat.com>
333 * ar.c (decode_options): Restart option scanning if no operation
334 is detected and argument remain to be scanned.
336 2019-07-23 Nick Clifton <nickc@redhat.com>
339 * objdump.c (is_relocateable): Delete.
340 (load_specific_debug_section): Test the abfd for relocations
341 directly, rather than relying upon is_relocateable.
342 (dump_dwarf): Delete initlialization of is_relocateable.
344 2019-07-23 Alan Modra <amodra@gmail.com>
346 * readelf.c (get_parisc_segment_type): Split off hpux entries..
347 (get_ia64_segment_type): ..and these..
348 (get_hpux_segment_type): ..to here.
349 (get_segment_type): Condition GNU_MBIND on osabi. Use
350 get_hpux_segment_type.
351 (get_symbol_binding): Do not print UNIQUE for ELFOSABI_NONE.
352 (get_symbol_type): Do not print IFUNC for ELFOSABI_NONE.
354 2019-07-23 Alan Modra <amodra@gmail.com>
356 * testsuite/binutils-all/objcopy.exp (elf64): Correct object
357 file used to set this variable.
359 2019-07-23 Omar Majid <omajid@redhat.com>
361 * Makefile.am (AUTOMAKE_OPTIONS): Add subdir-objects
362 (GENTESTDLLSPROG): Define.
363 (TEST_PROGS): Add GENTESTDLLSPROG.
364 * Makefile.in: Regenerate.
365 * testsuite/binutils-all/objdump.exp
366 (test_objdump_dotnet_assemblies): New proc.
368 * testsuite/gentestdlls.c: New source file.
370 2019-06-28 Nick Clifton <nickc@redhat.com>
373 * objdump.c (slurp_symtab): Fail with a helpful error message if
374 the symbol table is too large. Skip this check for MMO format
377 2019-06-26 Nick Clifton <nickc@redhat.com>
380 * bucomm.c (bfd_nonfatal): If no bfd error code has been set then
381 indicate this in the output.
382 (bfd_nonfatal_message): Likewise.
384 2019-06-25 Jan Beulich <jbeulich@suse.com>
386 * readelf.c (dump_ctf_indent_lines): Rename local variable
387 "spaces" to "blanks".
389 2019-06-25 Jan Beulich <jbeulich@suse.com>
391 * objdump.c (dump_ctf_indent_lines): Rename local variable
392 "spaces" to "blanks".
394 2019-06-14 Alan Modra <amodra@gmail.com>
396 * Makefile.in: Regenerate.
397 * aclocal.m4: Regenerate.
398 * doc/Makefile.in: Regenerate.
400 2019-06-12 Christos Zoulas <christos@zoulas.com>
403 * readelf.c (process_netbsd_elf_note): Add support for
405 (process_note): Add support for PaX notes.
407 2019-06-12 Christos Zoulas <christos@zoulas.com>
410 * readelf.c (get_netbsd_elfcore_note_type): Add support for SH
413 2019-06-12 Christos Zoulas <christos@zoulas.com>
416 * readelf.c (get_netbsd_elfcore_note_type): Add support for NetBSD
419 2019-06-11 Christos Zoulas <christos@zoulas.com>
422 * readelf.c (get_alpha_symbol_other): New function.
423 (get_symbol_other): Use for Alpha symbols.
424 (is_32bit_pcrel_reloc): Add R_VAX_PCREL32.
426 2019-06-11 Christos Zoulas <christos@zoulas.com>
429 * readelf.c (decode_arm_unwind): Ensure that the local variable
430 'addr' is always initialised.
432 2019-06-10 Christos Zoulas <christos@zoulas.com>
435 * strings.c (print_strings): Use %u to print unsigned values in
438 2019-06-10 Christos Zoulas <christos@zoulas.com>
441 * arsup.c (ar_open): Use asprintf in place of xmalloc and
444 2019-06-03 Nick Clifton <nickc@redhat.com>
447 2019-05-29 Nick Clifton <nickc@redhat.com>
449 * configure.ac (LIBCTF): Export. Set to empty for non-ELF based
451 (HAVE_LIBCTF): Define if libctf support is available.
452 * Makefile.am (LIBCTF): Set value to @LIBCTF@.
453 * objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
455 * readelf.c: Likewise.
456 * configure: Regenerate.
457 * Makefile.in: Regenerate.
458 * config.in: Regenerate.
460 2019-05-30 Nick Alcock <nick.alcock@oracle.com>
462 * objdump.c (make_ctfsect): Drop cts_type, cts_flags, and
464 * readelf.c (shdr_to_ctf_sect): Likewise.
466 2019-05-30 Nick Clifton <nickc@redhat.com>
469 * readelf.c (process_version_sections): Add 0x prefix to address
470 display. Correct indentation.
472 2019-05-30 Alan Modra <amodra@gmail.com>
474 * testsuite/lib/binutils-common.exp (supports_gnu_unique): Add
475 s12z to targets not supporting this feature.
477 2019-05-30 Alan Modra <amodra@gmail.com>
479 * testsuite/lib/binutils-common.exp (run_dump_test): Support
480 tcl procedures for xfail args.
482 2019-05-29 Nick Clifton <nickc@redhat.com>
484 * README-how-to-make-a-release: Add libctf to list of directories
485 that need updates in their ChangeLogs.
487 2019-05-29 Nick Clifton <nickc@redhat.com>
489 * configure.ac (LIBCTF): Export. Set to empty for non-ELF based
491 (HAVE_LIBCTF): Define if libctf support is available.
492 * Makefile.am (LIBCTF): Set value to @LIBCTF@.
493 * objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
495 * readelf.c: Likewise.
496 * configure: Regenerate.
497 * Makefile.in: Regenerate.
498 * config.in: Regenerate.
500 2019-05-28 Nick Alcock <nick.alcock@oracle.com>
502 * MAINTAINERS: Add myself as CTF maintainer.
504 2019-05-28 Nick Alcock <nick.alcock@oracle.com>
506 * objdump.c (ctf-api.h): New include.
507 (dump_ctf_section_info): New variable.
508 (dump_ctf_section_name): Likewise.
509 (usage): Describe new options.
510 (enum option_values): Add OPTION_CTF and OPTION_CTF_PARENT.
511 (main): Use them to add --ctf and --ctf-parent.
512 (read_section_stabs): Add new parameter, entsize_ptr.
513 (find_stabs_section): Adjust accordingly.
515 (dump_ctf_indent_lines): New.
516 (dump_ctf_archive_member): New.
518 (dump_bfd): Call it. Free resources afterwards.
519 * readelf.c (ctf-api.h): New include.
521 (static bfd_boolean do_ctf): Likewise.
522 (dump_ctf_parent_name): Likewise.
523 (dump_ctf_symtab_name): Likewise.
524 (dump_ctf_strtab_name): Likewise.
525 (OPTION_CTF_DUMP): Likewise.
526 (OPTION_CTF_PARENT): Likewise.
527 (OPTION_CTF_SYMBOLS): Likewise.
528 (OPTION_CTF_STRINGS): Likewise.
531 (parse_args): Handle the new options, requesting CTF_DUMP.
532 (process_section_contents): Handle CTF_DUMP.
533 (shdr_to_ctf_sect): New.
534 (dump_ctf_indent_lines): New.
535 (dump_section_as_ctf): New.
536 (main): Free resources.
537 * Makefile.am (LIBCTF): New variable.
538 (objdump_DEPENDENCIES): Use it.
539 (readelf_DEPENDENCIES): Likewise.
540 (objdump_LDADD): Likewise.
541 (readelf_LDADD): Likewise.
542 * aclocal.m4: Regenerated.
543 * Makefile.in: Likewise.
545 * doc/binutils.texi (objdump): Document the new options.
547 * doc/ctf.options.texi: New.
548 * doc/Makefile.in: Regenerated.
549 * NEWS: Mention the new feature.
551 2019-05-27 Alan Modra <amodra@gmail.com>
553 * readelf.c (process_section_groups): Continue processing groups
554 when sh_entsize exceeds group size.
556 2019-05-24 Szabolcs Nagy <szabolcs.nagy@arm.com>
558 * readelf.c (get_aarch64_dynamic_type): Handle DT_AARCH64_VARIANT_PCS.
559 (get_aarch64_symbol_other): New, handles STO_AARCH64_VARIANT_PCS.
560 (get_symbol_other): Call get_aarch64_symbol_other.
562 2019-05-24 Alan Modra <amodra@gmail.com>
564 * objdump.c (disassemble_bytes): Set WIDE_OUTPUT in flags.
566 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com>
568 * MAINTAINERS: Add myself as the maintainer for BPF.
570 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com>
572 * readelf.c: Include elf/bpf.h.
573 (guess_is_rela): Hanle EM_BPF.
574 (dump_relocations): Likewise.
575 (is_32bit_abs_reloc): Likewise.
576 * testsuite/binutils-all/nm.exp: Add bpf-*-* to the list of
579 2019-05-21 Tamar Christina <tamar.christina@arm.com>
581 * dwarf.c (dwarf_regnames_aarch64): Add SVE registers.
582 * testsuite/binutils-all/aarch64/sve-dwarf-registers.d: New test.
583 * testsuite/binutils-all/aarch64/sve-dwarf-registers.s: New test.
585 2019-05-20 Faraz Shahbazker <fshahbazker@wavecomp.com>
588 * testsuite/binutils-all/readelf.ss-mips: Update reference output.
589 * testsuite/binutils-all/readelf.ss-tmips: Likewise.
591 2019-05-20 Nick Clifton <nickc@redhat.com>
593 * po/ca.po: Updated Catalan translation.
595 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
597 * NEWS: Mention Armv8.1-M Mainline and MVE.
599 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
601 * readelf.c (arm_attr_tag_MVE_arch): New array for Tag_MVE_arch values.
602 (arm_attr_public_tag arm_attr_public_tags): Add case for Tag_MVE_arch.
604 2019-05-14 Jamey Hicks <jamey.hicks@gmail.com>
607 * objcopy.c: Add new option --verilog-data-width. Use it to set
608 the value of VerilogDataWidth.
609 * doc/binutils.texi: Document the new option.
610 * testsuite/binutils-all/objcopy.exp: Run tests of new option.
611 * testsuite/binutils-all/verilog-1.hex: New file.
612 * testsuite/binutils-all/verilog-2.hex: New file.
613 * testsuite/binutils-all/verilog-4.hex: New file.
614 * testsuite/binutils-all/verilog-8.hex: New file.
615 * NEWS: Mention the new feature.
617 2019-05-10 Alan Modra <amodra@gmail.com>
619 * testsuite/binutils-all/objdump.exp (test_objdump_disas_limited),
620 (test_objdump_content_limited): Add text arg, use in place of .text.
621 (bintest_signed.o): Call get_standard_section_names for name of
624 2019-05-08 Faraz Shahbazker <fshahbazker@wavecomp.com>
626 * objdump.c (sign_extend_address): New function.
627 (dump_bfd): Sign-extend user-specified start/stop addresses
628 for targets that need it.
629 * testsuite/binutils-all/objdump.exp: Add tests for objdump
630 with start and stop addresses in higher address ranges.
632 2019-05-01 Matthew Malcomson <matthew.malcomson@arm.com>
634 * testsuite/binutils-all/objdump.exp: Correct executable
636 * testsuite/binutils-all/compress.exp: Likewise.
638 2019-05-01 Nick Clifton <nickc@redhat.com>
641 * nm.c: (print_format): New variable.
642 (value_format_32bit, value_format_64bit): Delete.
643 (set_print_radix): Remove code to alter value_format strings.
644 (set_output_format): Record chosen format in print_format.
645 (get_print_format): New function - constructs a printf formatting
646 string according to the requirements of size, radix, and output
648 (print_value): Use get_print_format.
649 * testsuite/binutils-all/nm.exp: Add tests of "nm --format=posix"
652 2019-04-30 Alan Modra <amodra@gmail.com>
654 * wrstabs.c (stab_start_class_type): Add assert to work around
657 2019-04-24 Nick Clifton <nickc@redhat.com>
659 * objcopy.c (strip_main): Do not enable note merging by default if
660 just stripping debug or dwo information.
661 * doc/binutils.texi (strip): Update documentation.
663 2019-04-23 Nick Clifton <nickc@redhat.com>
665 * README-how-to-make-a-release: Add note to update the symbolic
666 link from "docs" to "docs-2.x" on the sourceware website.
668 2019-04-16 Alan Modra <amodra@gmail.com>
670 * testsuite/binutils-all/copy-2.d: Don't run for ns32k-*-*.
671 * testsuite/binutils-all/copy-3.d: Likewise.
673 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
675 * readelf.c (arm_attr_tag_CPU_arch): Add entry for Armv8.1-M Mainline.
677 2019-04-08 H.J. Lu <hongjiu.lu@intel.com>
679 * readelf.c (decode_x86_isa): Handle
680 GNU_PROPERTY_X86_ISA_1_AVX512_BF16.
681 * testsuite/binutils-all/i386/pr21231b.d: Updated.
682 * testsuite/binutils-all/x86-64/pr21231b.d: Likewise.
684 2019-04-08 H.J. Lu <hongjiu.lu@intel.com>
686 * testsuite/binutils-all/nm.exp: Count i386-moss as ELF.
688 2019-03-26 Tamar Christina <tamar.christina@arm.com>
690 * testsuite/binutils-all/aarch64/in-order-all.d: Update.
691 * testsuite/binutils-all/aarch64/in-order.d: Likewise.
692 * testsuite/binutils-all/aarch64/out-of-order-all.d: Likewise.
693 * testsuite/binutils-all/aarch64/out-of-order.d: Likewise.
694 * testsuite/binutils-all/aarch64/out-of-order.s: Likewise.
695 * testsuite/binutils-all/arm/in-order-all.d: Likewise.
696 * testsuite/binutils-all/arm/in-order.d: Likewise.
697 * testsuite/binutils-all/arm/out-of-order-all.d: Likewise.
698 * testsuite/binutils-all/arm/out-of-order.d: Likewise.
699 * testsuite/binutils-all/arm/out-of-order.s: Likewise.
701 2019-03-26 Nick Clifton <nickc@redhat.com>
703 * MAINTAINERS: Take over Dave Brolley's maintainerships for FR30,
706 2019-03-26 Alan Modra <amodra@gmail.com>
708 * objdump.c (dump_relocs_in_section): Warning fix.
710 2019-03-25 Tamar Christina <tamar.christina@arm.com>
712 * testsuite/binutils-all/arm/in-order-all.d: New test.
713 * testsuite/binutils-all/arm/in-order.d: New test.
714 * testsuite/binutils-all/arm/objdump.exp: Support .d tests.
715 * testsuite/binutils-all/arm/out-of-order-all.d: New test.
716 * testsuite/binutils-all/arm/out-of-order.T: New test.
717 * testsuite/binutils-all/arm/out-of-order.d: New test.
718 * testsuite/binutils-all/arm/out-of-order.s: New test.
721 2019-03-25 Tamar Christina <tamar.christina@arm.com>
723 * testsuite/binutils-all/aarch64/in-order-all.d: New test.
724 * testsuite/binutils-all/aarch64/out-of-order-all.d: New test.
725 * testsuite/binutils-all/aarch64/out-of-order.d:
727 2019-03-25 Tamar Christina <tamar.christina@arm.com>
729 * testsuite/binutils-all/aarch64/in-order.d: New test.
730 * testsuite/binutils-all/aarch64/out-of-order.d: Disassemble data as
733 2019-03-25 Tamar Christina <tamar.christina@arm.com>
735 * objdump.c (disassemble_bytes): Pass stop_offset.
736 * testsuite/binutils-all/aarch64/out-of-order.T: New test.
737 * testsuite/binutils-all/aarch64/out-of-order.d: New test.
738 * testsuite/binutils-all/aarch64/out-of-order.s: New test.
740 2019-03-19 Nick Clifton <nickc@redhat.com>
743 * objdump.c (load_specific_debug_section): Check that the amount
744 of memory to be allocated matches the size of the section.
746 2019-03-13 Sudakshina Das <sudi.das@arm.com>
748 * readelf.c (get_aarch64_dynamic_type): Add case for
750 (dynamic_section_aarch64_val): Likewise.
752 2019-03-13 Sudakshina Das <sudi.das@arm.com>
753 Szabolcs Nagy <szabolcs.nagy@arm.com>
755 * readelf.c (get_aarch64_dynamic_type): New.
756 (get_dynamic_type): Use above for EM_AARCH64.
757 (dynamic_section_aarch64_val): New.
758 (process_dynamic_section): Use above for EM_AARCH64.
760 2019-03-13 Sudakshina Das <sudi.das@arm.com>
762 * readelf.c (decode_aarch64_feature_1_and): New.
763 (print_gnu_property_note): Add case for AArch64 gnu notes.
765 2019-03-12 Alan Modra <amodra@gmail.com>
767 * objdump.c (load_specific_debug_section): Don't compare section
768 size against file size.
769 (dump_relocs_in_section): Don't compare reloc size against file size.
770 Print "failed to read relocs" on bfd_get_reloc_upper_bound error.
772 2019-03-05 Nick Clifton <nickc@redhat.com>
775 * doc/binutils.texi (ar cmdline): Fix spelling mistake.
777 2019-03-05 Nick Clifton <nickc@redhat.com>
779 * po/sv.po: Updated Swedish translation.
781 2019-03-05 Matthew Malcomson <matthew.malcomson@arm.com>
784 * testsuite/lib/binutils-common.exp (run_dump_test): Replace a use
785 of "lmap" with a "foreach" loop.
787 2019-03-04 Nick Clifton <nickc@redhat.com>
790 * objcopy.c (copy_archive): Do not copy thin archives.
792 2019-02-27 Matthew Malcomson <matthew.malcomson@arm.com>
794 * testsuite/lib/binutils-common.exp: Allow multiple "as" lines.
796 2019-02-25 Nick Clifton <nickc@redhat.com>
798 * objdump.c (sym_ok): New function.
799 (find_symbol_for_address): Use new function.
800 (disassemble_section): Compare sections by name, not pointer.
801 (dump_dwarf): Move code to initialise byte_get pointer and iterate
802 over separate debug files from here to ...
803 (dump_bfd): ... here. Add parameter indicating that a separate
804 debug info file is being dumped. For main file, pull in the
805 symbol tables from all separate debug info files.
806 (display_object): Update call to dump_bfd.
807 * doc/binutils.texi: Document extened behaviour of the
808 --dwarf=follow-links option.
809 * NEWS: Mention this new feature.
810 * testsuite/binutils-all/objdump.WK2: Update expected output.
811 * testsuite/binutils-all/objdump.exp (test_follow_debuglink): Add
812 options and dump file parameters.
814 * testsuite/binutils-all/objdump.WK3: New file.
815 * testsuite/binutils-all/readelf.exp: Change expected output for
817 * testsuite/binutils-all/readelf.wKis: New file.
819 2019-02-22 Nick Clifton <nickc@redhat.com>
822 * dwarf.h (struct separate_info): New structure for containing
823 information on separate debug info files.
824 * dwarf.c (struct dwo_info): New structure for containing dwo
826 (first_dwo_info): Chain of dwo_info structures.
827 (first_separate_file): Chain of separate_info structures.
828 (separate_debug_file, separate_debug_filename): Delete.
829 (fetch_alt_indirect_string): Scan all separate debug info files
830 for the requested string.
831 (add_dwo_info): New function.
832 (add_dwo_name): New function.
833 (add_dwo_dir): New function.
834 (add_dwo_id: New function.
835 (free_dwo_info): New function.
836 (read_and_display_attr_value): Store DWO data using the new
838 (load_debug_section_with_follow): If necessary, scan the list of
839 separate debug info files for the requested section.
840 (add_separate_debug_file): New function.
841 (load_separate_debug_info): Call add_separate_debug_file to store
842 the information on the newly loaded file.
843 (load_dwo_file): Likewise.
844 (load_separate_debif_file): Rename to load_separate_debug_files.
845 Change return type to boolean. If following links then attempt to
846 load all separate debug info files, not just the first one.
847 (free_debug_memory): Release memory in dwo_info and separate_info
849 * objdump.c (dump_dwarf): Iterate over all loaded debg info files.
850 * readelf.c (process_object): Likewise.
851 * doc/debug.options.texi: Update descriptions of links and
852 follow-links options.
853 * testsuite/binutils-all/objdump.WK2: Update expected output.
854 * testsuite/binutils-all/readelf.k2: Likewise.
855 * NEWS: Announce the new feature.
857 2019-02-21 Nick Clifton <nickc@redhat.com>
860 * unwind-ia64.c: Include sysdep.h.
861 (unw_decode_x1): Check current pointer against end pointer before
863 (unw_decode_x2): Likewise.
864 (unw_decode_x3): Likewise.
865 (unw_decode_x4): Likewise.
866 (unw_decode_r2): Likewise.
867 (unw_decode_p2_p5): Likewise.
868 (unw_decode_p7_p10): Likewise.
869 (unw_decode): Likewise.
871 2019-02-20 Nick Clifton <nickc@redhat.com>
874 * readelf.c (print_stapsdt_note): Harden against corrupt notes.
877 * unwind-ia64.c (unw_decode_uleb128): Add end parameter, use it to
878 prevent walking off the end of the buffer.
879 (unw_decode_x1): Add end paramter, pass it to unw_decode_uleb128.
880 (unw_decode_x2): Likewise.
881 (unw_decode_x3): Likewise.
882 (unw_decode_x4): Likewise.
883 (unw_decode_r2): Pass the end parameter to unw_decode_uleb128.
884 (unw_decode_r3): Likewise.
885 (unw_decode_p7_p10): Likewise.
886 (unw_decode_b2): Likewise.
887 (unw_decode_b3_x4): Likewise.
890 * readelf.c (process_mips_specific): Check for an options section
891 that is too small to even contain a single option.
894 * readelf.c (print_ia64_vms_note): Harden against corrupt notes.
896 2019-02-20 Alan Modra <amodra@gmail.com>
900 * readelf.c (get_data): Avoid possibility of overflow when
901 checking for a read that may extend past end of file.
902 (process_program_headers): Likewise.
904 2019-02-20 Alan Modra <amodra@gmail.com>
907 * objdump.c (dump_bfd_private_header): Print warning if
908 bfd_print_private_bfd_data returns false.
910 2019-02-12 Nick Clifton <nickc@redhat.com>
913 * README-how-to-make-a-release: Use git clean to delete spurious
914 files from the local source repository.
916 2019-02-08 Andrew Burgess <andrew.burgess@embecosm.com>
918 * size.c (berkeley_format): Delete.
919 (enum output_format): New enum.
920 (selected_output_format): New variable.
921 (usage): Update to mention GNU format.
922 (main): Update to extract options, and select format as needed.
923 Handle GNU format where needed.
924 (berkeley_sum): Renamed to...
925 (berkeley_or_gnu_sum): ...this, and updated to handle both formats.
926 (berkeley_format): Renamed to...
927 (berkeley_or_gnu_format): ...this, and updated to handle both
929 (print_sizes): Handle GNU format.
930 * doc/binutils.texi (size): Document new GNU format.
931 * testsuite/binutils-all/size.exp: Add test of extended
933 * NEWS: Mention new functionality.
935 2019-02-08 Andrew Burgess <andrew.burgess@embecosm.com>
937 * doc/binutils.texi (size): Update example output for Berkeley
940 2019-02-07 Nick Clifton <nickc@redhat.com>
942 * README-how-to-make-a-release: Add a note about updating the
943 obsolete targets in the bfd/config.bfd file.
945 2019-02-04 Nick Clifton <nickc@redhat.com>
947 * README-how-to-make-a-release: Add more notes on making a release.
949 2019-01-25 Nick Clifton <nickc@redhat.com>
952 * readelf.c (process_notes_at): Prevent an illegal memory access
953 when the note's namesize is zero.
954 (decode_tic6x_unwind_bytecode): Add code to handle the case where
955 no registers are specified in a frame pop instruction.
957 2019-01-25 Nick Clifton <nickc@redhat.com>
959 * po/bg.po: Updated Bulgarian translation.
961 2019-01-23 Nick Clifton <nickc@redhat.com>
963 * po/fr.po: Updated French translation.
964 * po/pt.po: Updated Portuguese translation.
966 2019-01-21 Nick Clifton <nickc@redhat.com>
968 * po/uk.po: Updated Ukranian translation.
970 2019-01-19 Nick Clifton <nickc@redhat.com>
972 * configure: Regenerate.
973 * binutils/po/binutils.pot.
975 * README-how-to-make-a-release: Update description on how to make
978 2018-06-24 Nick Clifton <nickc@redhat.com>
982 2019-01-17 Nick Clifton <nickc@redhat.com>
984 * objdump.c (disassemble_section): When disassembling from a
985 symbol only stop at the next symbol if the original symbol was not
986 a function symbol. Otherwise continue disassembling until a new
988 * testsuite/binutils-all/objdump.exp: Add tests of extended
990 * testsuite/binutils-all/disasm.s: New test source file.
992 2019-01-16 Kito Cheng <kito@andestech.com>
993 Nelson Chu <nelson@andestech.com>
995 * readelf.c (get_riscv_section_type_name): New function.
996 (get_section_type_name): Add handler for RISC-V.
997 (riscv_attr_tag_t): Declare.
998 (riscv_attr_tag): New.
999 (display_riscv_attribute): New function.
1000 (process_attributes): Add handler for RISC-V.
1001 * testsuite/binutils-all/strip-3.d: Remove .riscv.attribute
1004 2019-01-10 Nick Clifton <nickc@redhat.com>
1007 * objdump.c (sanitize_string): New function. Removes control
1008 characters from symbol names.
1009 (dump_section_header): Use new function.
1010 (objdump_print_symname): Likewise.
1011 (objdump_print_addr_with_sym): Likewise.
1012 (show_line): Likewise.
1013 (disassemble_bytes): Likewise.
1014 (disassemble_section): Likewise.
1015 (load_specific_debug_section): Likewise.
1016 (read_section_stabs): Likewise.
1017 (print_section_stabs): Likewise.
1018 (dump_section): Likewise.
1019 (dump_reloc_set): Likewise.
1020 (dump_relocs_in_section): Likewise.
1021 (dump_bfd): Likewise.
1022 (display_any_bfd): Likewise.
1024 2019-01-09 Nick Clifton <nickc@redhat.com>
1027 * readelf.c (process_archive): Use arch.file_name in error
1028 messages until the qualified name is available.
1030 2019-01-09 Andrew Paprocki <andrew@ishiboo.com>
1032 * configure: Regenerate.
1034 2019-01-09 Alan Modra <amodra@gmail.com>
1036 * testsuite/binutils-all/cxxfilt.exp: Pass --no-strip-underscores
1037 unconditionally to tests needing the option rather than via a
1040 2019-01-08 Nick Clifton <nickc@redhat.com>
1043 * cxxfilt.c (hp_symbol_characters): Delete.
1044 (main): Remove depcreated demangling styles.
1045 * stabs.c (parse_stab_argtypes): Remove support for old gnu v2
1047 * testsuite/binutils-all/cxxfilt.exp: Use the
1048 --no-strip-underscore option for targets that do prefix their
1049 symbols with underscores.
1050 Update tests to eliminate those that use gnu v2 encoding.
1052 2019-01-08 Tamar Christina <tamar.christina@arm.com>
1055 * testsuite/binutils-all/copy-6.d: New test.
1056 * testsuite/binutils-all/objcopy.exp: Use it.
1058 2019-01-08 Alan Modra <amodra@gmail.com>
1060 * testsuite/lib/binutils-common.exp (run_dump_test): Don't prepend
1061 $srcdir/$subdir to source file name if it starts with "./".
1063 2019-01-05 Yoshinori Sato <ysato@users.sourceforge.jp>
1065 * readelf.c (get_machine_flags): Add RXv3 output.
1067 2019-01-04 Nick Clifton <nickc@redhat.com>
1070 * objdump.c (load_specific_debug_section): Check for integer
1071 overflow before attempting to allocate contents.
1073 2019-01-04 Nick Clifton <nickc@redhat.com>
1076 * objcopy.c (copy_object): Free dhandle after writing out the
1078 * objdump.c (dump_bfd): Free dhandle after printing out the debug
1082 2019-01-01 Alan Modra <amodra@gmail.com>
1084 Update year range in copyright notice of all files.
1086 For older changes see ChangeLog-2018
1088 Copyright (C) 2019 Free Software Foundation, Inc.
1090 Copying and distribution of this file, with or without modification,
1091 are permitted in any medium without royalty provided the copyright
1092 notice and this notice are preserved.
1098 version-control: never