1 Mon Jun 3 17:40:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3 * strings.c (main): Make main an int function, not void.
5 Fri May 31 13:59:24 1996 Ian Lance Taylor <ian@cygnus.com>
7 * nm.c (filter_symbols): Check for BSF_WEAK as well as
9 * objcopy.c (filter_symbols): Likewise.
11 Wed May 8 16:57:20 1996 Ian Lance Taylor <ian@cygnus.com>
13 * objcopy.c (copy_object): Make clear that it is only a warning
14 when the output file can not represent the architecture.
16 Fri May 3 11:30:17 1996 Ian Lance Taylor <ian@cygnus.com>
18 * objdump.c (disassemble_data): Don't refer to bytes past the end
21 Wed Apr 24 14:10:21 1996 Ian Lance Taylor <ian@cygnus.com>
23 * rddbg.c (read_symbol_stabs_debugging_info): Move call to
24 free_saved_stabs outside the loop over the symbols.
26 Tue Apr 23 12:56:11 1996 Ian Lance Taylor <ian@cygnus.com>
28 * objdump.c (compare_symbols): Sort symbols whose names start with
29 `.' after other symbols. If no other decision can be made, sort
32 Thu Apr 18 16:02:11 1996 Ian Lance Taylor <ian@cygnus.com>
34 * dep-in.sed: Substitute $(BFDDIR) for @BFDDIR@.
35 * Makefile.in: Rebuild dependencies.
36 (dep.sed): Substitute $(BFDDIR) for @BFDDIR@.
38 Tue Apr 16 13:50:22 1996 Ian Lance Taylor <ian@cygnus.com>
41 * rddbg.c (read_debugging_info): Read COFF symbols if COFF flavour
42 and no stabs were found.
43 * budbg.h (parse_coff): Declare.
44 * Makefile.in: Rebuild dependencies.
45 (CFILES): Add rdcoff.c.
46 (DEBUG_OBJS): Add rdcoff.o.
48 Mon Apr 15 15:55:01 1996 Doug Evans <dje@canuck.cygnus.com>
50 * nlmconv.c (choose_temp_base{,_try}): Delete, in libiberty now.
51 (link_inputs): Update call to choose_temp_base.
53 Mon Apr 8 14:40:05 1996 Ian Lance Taylor <ian@cygnus.com>
55 * configure.in: Permit --enable-shared to specify a list of
59 Fri Mar 29 16:11:33 1996 Ian Lance Taylor <ian@cygnus.com>
61 * objdump.c (dump_section_header): Print the SEC_LINK_ONCE flag
62 and the SEC_LINK_DUPLICATES field.
64 Fri Mar 29 11:35:55 1996 J.T. Conklin (jtc@lisa.cygnus.com)
66 * nlmconv.1: Changed to be recognized by catman -w on Solaris.
68 Thu Mar 28 14:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
70 * wrstabs.c (stab_enum_type): Set buf before using it.
72 Fri Mar 22 15:49:08 1996 Ian Lance Taylor <ian@cygnus.com>
74 * stabs.c (struct stab_handle): Add field abfd.
75 (start_stab): Add abfd parameter.
76 (parse_stab_string): Skip the symbol leading char when searching
77 for the value of a global symbol.
78 * budbg.h (start_stab): Update declaration.
79 * rddbg.c (read_section_stabs_debugging_info): Pass abfd to
81 (read_symbol_stabs_debugging_info): Likewise.
83 Thu Mar 21 12:40:48 1996 Ian Lance Taylor <ian@cygnus.com>
85 * wrstabs.c (stab_function_type): Output an empty typedef for an
86 unused argument, rather than making up a meaningless name.
87 (stab_variable): Use N_RSYM for a DEBUG_REGISTER variable.
89 * ieee.c (struct ieee_info): Add global_vars field.
90 (parse_ieee_be): When ending the global typedef block, copy the
91 variables into info->global_vars.
92 (parse_ieee_atn): Don't require an NN record for a pmisc ATN.
93 (ieee_read_reference): Search the global variables after the local
96 Wed Mar 20 18:08:19 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
98 * objdump.c (disassemble_data): Make sure sym_name is always set.
99 (dump_section_header): Always put a space after the section name.
100 (dump_bfd_header): Terminate output with newline.
102 Wed Mar 20 16:35:20 1996 Ian Lance Taylor <ian@cygnus.com>
104 * wrstabs.c: New file.
105 * budbg.h (write_stabs_in_sections_debugging_info): Declare.
106 * objcopy.c (write_debugging_info): For COFF or ELF, output stabs
108 * Makefile.in: Rebuild dependencies.
109 (CFILES): Add wrstabs.c.
110 (WRITE_DEBUG_OBJS): New variable.
111 ($(OBJCOPY_PROG)): Use $(WRITE_DEBUG_OBJS), not $(DEBUG_OBJS).
112 ($(STRIP_PROG)): Likewise.
114 * stabs.c (parse_stab_members): Make type stub detection more like
117 * ieee.c (struct ieee_handle): Add fields complex_float_index and
118 complex_double_index.
119 (ieee_complex_type): Cache type index in complex_float_index and
120 complex_double_index, depending upon size. Set size on type stack
123 * ieee.c (ieee_empty_type): Use builtin_unknown, not 0.
124 (ieee_void_type): Use builtin_void, not 1.
126 * ieee.c (parse_ieee_ty): Handle 'V' type code.
127 (parse_ieee_atn): Don't require two numbers for type 10.
129 * ieee.c (parse_ieee_be): Add one to offset at end of function or
132 * ieee.c (struct ieee_block): Add field skip.
133 (parse_ieee_bb): Don't call debug_record_function for __XRYCPP
134 function, and set skip field.
135 (parse_ieee_be): Don't call debug_end_function if skip is set.
137 * debug.c (struct debug_handle): Add fields current_write_lineno
138 and current_write_lineno_index.
139 (debug_write): Initialize current_write_lineno and
140 current_write_lineno_index for each unit. Call
141 debug_write_linenos rather than writing out the line numbers
143 (debug_write_function): Call debug_write_linenos.
144 (debug_write_block): Likewise.
145 (debug_write_linenos): New static function.
147 * debug.c (debug_write_type): For DEBUG_KIND_FUNCTION, push return
148 type before arguments.
150 Mon Mar 18 18:05:33 1996 Ian Lance Taylor <ian@cygnus.com>
152 * configure.in: Add AC_FUNC_VFORK.
153 * configure, config.in: Rebuild.
154 * dlltool.c, nlmconv.c: Include <vfork.h> if HAVE_VFORK_H is
157 * stabs.c (parse_stab_range_type): A complex type is defined as a
158 subrange of itself with the high bound zero.
159 * ieee.c (ieee_complex_type): Don't crash on sizes of 12 or 16.
161 Tue Mar 12 12:09:43 1996 Ian Lance Taylor <ian@cygnus.com>
163 * ieee.c (ieee_write_undefined_tag): Switch to global_types even
165 (ieee_tag_type): For an enum, look through info->enums.
167 * configure: Rebuild with autoconf 2.8.
169 * debug.c (debug_type_samep): Don't loop endlessly in
170 DEBUG_KIND_ENUM case. From Eric Baur <ecb@nexen.com>.
172 Mon Mar 11 12:35:03 1996 Ian Lance Taylor <ian@cygnus.com>
174 * rddbg.c (read_section_stabs_debugging_info): Call save_stab for
175 each stab entry, call stab_context on an error, and call
176 free_saved_stabs before rturning.
177 (read_symbol_stabs_debugging_info): Likewise.
178 (SAVE_STABS_COUNT): Define.
179 (struct saved_stab): Define.
180 (saved_stabs, saved_stabs_index): New static variables.
181 (save_stab, stab_context, free_saved_stabs): New static functios.
183 * objdump.c (stab_name): Remove.
184 (struct stab_print): Remove.
185 (stab_print): Remove.
186 (dump_stabs): Don't initialize stab_name.
187 (print_section_stabs): Call bfd_get_stab_name rather than using
190 Tue Feb 27 19:52:01 1996 Ian Lance Taylor <ian@cygnus.com>
192 * prdbg.c (pr_int_constant): Initialize info correctly.
193 (pr_float_constant): Likewise.
195 Mon Feb 26 18:11:37 1996 Stan Shebs <shebs@andros.cygnus.com>
197 * mpw-make.sed: Update to handle shared library support.
199 Sat Feb 24 11:21:49 1996 Alan Modra <alan@spri.levels.unisa.edu.au>:
201 * Makefile.in ($(OBJDUMP_PROG)): Search $(BFDLIB) before
204 Thu Feb 15 12:44:45 1996 Ian Lance Taylor <ian@cygnus.com>
206 * configure.in: Don't tamper with LDFLAGS. Call AC_PROG_CC before
208 * configure: Rebuild.
210 * configure.in: Substitute RPATH_ENVVAR.
211 * configure: Rebuild.
212 * Makefile.in (RPATH_ENVVAR): New variable.
213 (check): Use $(RPATH_ENVVAR) rather than LD_LIBRARY_PATH.
215 * objcopy.c (smart_rename): Rather than doing chmod then chown, do
216 chmod without setuid, then chown, then chmod with setuid.
218 Wed Feb 14 16:46:42 1996 Martin Anantharaman <martin@mail.imech.uni-duisburg.de>
220 * arsup.c (map_over_list): Reindent. Don't assume that the
221 function does not delete the BFD.
222 (ar_addlib_doer): Don't set prev->next if prev is NULL.
224 Wed Feb 14 15:12:17 1996 Ian Lance Taylor <ian@cygnus.com>
226 * ieee.c (ieee_regno_to_genreg): Convert register numbers for m68k
228 (ieee_genreg_to_regno): Likewise.
230 Mon Feb 12 14:19:59 1996 Ian Lance Taylor <ian@cygnus.com>
232 * ieee.c: Extensive changes to write code to put types in the
233 global type block when possible, to output ranges for all memory
234 occupied by the module, and to improve efficiency.
236 * debug.c (struct debug_handle): Remove class_mark field. Add
237 id_list and compare_list fields.
238 (struct debug_class_id): Define.
239 (struct debug_type_compare_list): Define.
240 (debug_write): Initialize info->id_list
241 (debug_write_name): Remove reference to info->class_mark.
242 (debug_write_type): Get id for all structs and classes. Simplify
243 test for whether struct has already been written.
244 (debug_write_class_type): Get id for all classes. Simplify test
245 for whether class has already been written.
246 (debug_write_block): Don't write out blocks other than the top
247 level block if they have no local variables.
248 (debug_set_class_id): New static function.
249 (debug_type_samep): New static function.
250 (debug_class_type_samep): New static function.
251 * prdbg.c (pr_start_struct_type): Always print id.
252 (pr_start_class_type): Likewise.
253 (pr_tag_type): Likewise.
255 * stabs.c (struct stab_handle): Add syms and symcount fields.
256 (start_stab): Add syms and symcount parameters. Change all
258 (parse_stab_string): Look up global variables in the symbol table
259 to get the right value.
260 * budbg.h (start_stab): Update declaration.
261 * rddbg.c (read_section_stabs_debugging_info): Add syms and
262 symcount parameters. Change all callers.
264 * stabs.c (parse_stab_array_type): If the index type is 0, use
267 Wed Feb 7 14:17:45 1996 Ian Lance Taylor <ian@cygnus.com>
269 * ieee.c (ieee_start_compilation_unit): Clear modified and
270 modified_alloc fields of info.
272 * configure.in: Check for --enable-shared. Substitute new
273 variables BFDLIB and OPCODES.
274 * configure: Rebuild.
275 * Makefile.in (BFDLIB): Set to @BFDLIB@.
276 (OPCODES): Set to @OPCODES@.
278 Mon Feb 5 16:18:42 1996 Ian Lance Taylor <ian@cygnus.com>
280 Support for building bfd and opcodes as shared libraries, based on
281 patches from Alan Modra <alan@spri.levels.unisa.edu.au>:
282 * configure.in (HLDFLAGS): New substitution.
283 * configure: Rebuild.
284 * Makefile.in (HLDFLAGS): New variable. Make all links use
285 $(HLDFLAGS) before $(CFLAGS) and $(LDFLAGS).
286 (BFDLIB_DEP): New variable. Replace all occurrences of $(BFD) as
287 a dependency with $(BFDLIB_DEP). Remove $(BFD) as a dependency if
288 there is also a dependency on $(ADDL_DEPS).
289 (BFDLIB): Rename from BFD; change all uses; set to -L../bfd -lbfd.
290 (OPCODES_DEP): New variable. Replace all occurrends of $(OPCODES)
291 as a dependency with $(OPCODES_DEP).
292 (OPCODES): Set to -L../opcodes -lopcodes.
293 (ADDL_DEPS): New variable. Replace all occurrences of
294 $(ADDL_LIBS) as a dependency with $(ADDL_DEPS).
295 (check): Set LD_LIBRARY_PATH in the environment.
296 (config.status): Depend upon BFD configure.host and config.bfd.
298 Fri Feb 2 17:02:59 1996 Doug Evans <dje@charmed.cygnus.com>
300 * objdump.c: #include stdarg.h or varargs.h.
301 (objdump_print_value): Change FILE* arg to struct disassemble_info*.
302 All callers updated. Use fprintf_func.
303 (objdump_print_address): Consistently use fprintf_func.
304 (objdump_sprintf): New function.
305 (disassemble_data): Print insn into a buffer, print raw insn ourselves,
306 then print insn mnemonic.
308 Fri Feb 2 16:48:55 1996 Ian Lance Taylor <ian@cygnus.com>
310 * configure: Regenerate.
312 Thu Feb 1 09:38:18 1996 Steve Chamberlain <sac@slash.cygnus.com>
314 * configure.in (i[3-6]86-*-win32): Becomes i[3-6]86-*-cygwin32.
315 (powerpc*-*-cygwin32): New.
316 * configure: Regenerated.
318 Wed Jan 31 13:22:03 1996 Richard Henderson <rth@tamu.edu>
320 * Makefile.in (distclean): Remove $(DEMANGLER_PROG).1.
322 Mon Jan 29 17:36:29 1996 Ian Lance Taylor <ian@cygnus.com>
324 Based on patches from H J Lu <hjl@zoom.com>:
325 * objcopy.c (remove_leading_char): New static variable.
326 (OPTION_REMOVE_LEADING_CHAR): Define.
327 (copy_usage): Mention --remove-leading-char.
328 (filter_symbols): If remove_leading_char, and the first character
329 of a global symbol matches the symbol leading char of the BFD,
330 remove the first character.
331 (copy_object): Filter the symbols if remove_leading_char is set.
332 (copy_main): Handle --remove-leading-char.
333 * binutils.texi, objcopy.1: Document --remove-leading-char.
335 Sat Jan 27 15:40:13 1996 Michael Meissner <meissner@tiktok.cygnus.com>
337 * objdump.c (fprintf): Add prototype to avoid compiler warning on
340 Fri Jan 26 11:53:42 1996 Ian Lance Taylor <ian@cygnus.com>
342 * binutils.texi (nm): Improve documentation on symbol types.
343 (objdump): Reference the stabs manual from the discussion of the
346 Thu Jan 25 11:21:46 1996 Raymond Jou <rjou@mexican.cygnus.com>
348 * mpw-make.sed: Add a "stamps" target.
350 Thu Jan 25 13:51:44 1996 Ian Lance Taylor <ian@cygnus.com>
352 * objdump.c (dump_headers, dump_section_header): Change objdump -h
353 output to be simpler and to include section file offsets.
355 Wed Jan 24 12:06:05 1996 Ian Lance Taylor <ian@cygnus.com>
357 * stabs.c (parse_stab_members): Don't adjust voffset.
359 * ieee.c (ieee_read_cxx_class): Don't multiply voffset by 4.
360 (struct ieee_write_type): Add name field.
361 (struct ieee_type_class): Remove name field. Change all uses to
362 use new name field in type instead.
363 (struct ieee_name_type): Likewise.
364 (ieee_start_struct_type): Initialize name field of type.
365 (ieee_start_class_type): Don't initialize classdef entry of tag.
366 (ieee_class_method_var): Don't adjust voffset.
367 (ieee_end_class_type): Likewise.
368 (ieee_tag_type): Initialize new name field of type.
369 (ieee_typdef): Set name after copying in type information.
371 * debug.c (VOFFSET_STATIC_METHOD): Define as -1, not 1.
373 * ieee.c (struct ieee_modified_type): Define.
374 (struct ieee_handle): Add modified and modified_alloc fields.
375 (ieee_get_modified_info): New static function.
376 (ieee_pointer_type): Cache type index.
377 (ieee_const_type): Likewise.
378 (ieee_volatile_type): Likewise.
380 * ieee.c (ieee_define_named_type): When creating a tag for an
381 anonymous struct, copy the name into memory.
382 (ieee_tag_type): Likewise.
383 * debug.c (debug_write_type): Only check and set id field for an
385 (debug_write_class_type): Likewise.
387 * ieee.c: Various changes to write out types for functions and
388 references, and to not write out unnecessary function types.
390 * ieee.c (struct ieee_var): Remove variable field. Add kind
391 field, and define some enum constants for it.
392 (parse_ieee_ty): Set kind field of variable for 'x' and 'X' types.
393 (parse_ieee_atn): Make an indirect slot for an external variable,
394 although we otherwise don't record it. Set kind field rather than
395 variable field of pvar.
396 (ieee_read_cxx_class): Try to get the type of a static member.
397 (ieee_read_reference): Check kind field rather than variable
400 Tue Jan 23 15:54:18 1996 Ian Lance Taylor <ian@cygnus.com>
402 * ieee.c: Various changes to handle reading C++ reference type
405 * debug.h (enum debug_var_kind): Add DEBUG_VAR_ILLEGAL.
406 (enum debug_parm_kind): Add DEBUG_PARM_ILLEGAL.
407 * debug.c (debug_get_parameter_types): Handle DEBUG_KIND_FUNCTION.
409 * ieee.c: Various changes to write out definitions of C++ classes.
411 * debug.c (debug_append_filename): Remove.
412 * debug.h (debug_append_filename): Don't declare.
414 * stabs.c (struct stab_handle): Remove last_type field. Add
415 so_string and so_value fields.
416 (finish_stab): Call stab_emit_pending_vars before calling
417 debug_end_function. Don't warn about pending variables.
418 (parse_stab): Accumulate N_SO strings until a non N_SO symbol is
419 seen, rather than calling debug_append_filename. Call
420 stab_emit_pending_vars before calling debug_end_function. Don't
423 Tue Jan 23 09:53:54 1996 Doug Evans <dje@charmed.cygnus.com>
425 * objdump.c (disassemble_data): Handle unknown endianness.
426 Pass fprintf to INIT_DISASSEMBLE_INFO.
428 Mon Jan 22 16:46:43 1996 Doug Evans <dje@charmed.cygnus.com>
430 Add new option --show-raw-insn.
431 * objdump.c (show_raw_insn): New global.
433 (long_options): Update.
434 (disassemble_data): Set disasm_info.flags if --show-raw-insn.
436 * objdump.c (disassemble_data): Set new arch,mach,endian fields in
439 Mon Jan 22 19:29:36 1996 Ian Lance Taylor <ian@cygnus.com>
441 * ieee.c: Extensive changes to pass a single info argument around
442 in the reading routines, rather than several arguments. Add code
443 to read C++ debugging records.
445 * debug.h (debug_get_type_size): Declare.
446 (debug_get_field_name): Declare.
447 (debug_get_field_bitpos): Declare.
448 (debug_get_field_bitsize): Declare.
449 (debug_get_field_visibility): Declare.
450 (debug_get_field_physname): Declare.
451 * debug.c (debug_get_real_type): Handle DEBUG_KIND_TAGGED.
452 (debug_get_type_size): New function.
453 (debug_get_field_name): New function.
454 (debug_get_field_bitpos): New function.
455 (debug_get_field_bitsize): New function.
456 (debug_get_field_visibility): New function.
457 (debug_get_field_physname): New function.
458 (debug_write_type): Make sure we pass the real kind, not INDIRECT,
459 to tag_type. Pass the name recursively for INDIRECT.
461 Fri Jan 19 12:31:57 1996 Ian Lance Taylor <ian@cygnus.com>
463 * debug.h (struct debug_write_fns): Remove ellipsis_type. Add int
464 and boolean parameters to function_type. Add boolean parameter to
466 (debug_make_ellipsis_type): Don't declare.
467 (debug_make_function_type): Add debug_type * and boolean
468 parameters. Change all callers.
469 (debug_make_method_type): Add boolean parameter. Change all
471 (debug_get_parameter_types): Add boolean * parameter. Change all
473 (debug_get_target_type): Declare.
474 * debug.c (struct debug_function_type): Add fields arg_types and
476 (struct debug_method_type): Add field varargs.
477 (debug_ellipsis_type, ELLIPSIS_P): Remove.
478 (debug_make_ellipsis_type): Remove.
479 (debug_make_function_type): Add arg_types and varargs parameters.
480 (debug_make_method_type): Add varargs parameter.
481 (debug_get_parameter_types): Add pvarargs parameter.
482 (debug_get_target_type): New function.
483 (debug_write_type): In case DEBUG_KIND_FUNCTION, push argument
484 types and pass count to function_type. In DEBUG_KIND_METHOD, use
485 a signed int for the count, don't call ellipsis_type, and pass
486 varargs to method_type.
487 * stabs.c (struct stab_demangle_info): Add varargs field.
488 (stab_demangle_argtypes): Add pvarargs parameter. Change all
490 (stab_demangle_args): Likewise.
491 (stab_demangle_type): In case 'F', pick up argument types.
492 * prdbg.c (pr_ellipsis_type): Remove.
493 (pr_function_type): Add argcount and varargs parameters.
494 (pr_method_type): Add varargs parameter.
495 * ieee.c (ieee_ellipsis_type): Remove.
496 (ieee_function_type): Add argcount and varargs parameters.
497 (ieee_method_type): Add varargs parameter. Remove most of
498 function body, and just call ieee_function_type.
500 * stabs.c: Include "demangle.h". Added several new static
501 functions not listed below to demangle argument types; they are
502 all called via stab_demangle_argtypes.
503 (finish_stab): If the kind of an undefined tag is
504 DEBUG_KIND_ILLEGAL, use DEBUG_KIND_STRUCT instead. Warn if there
505 are any pending variable.
506 (parse_stab): Don't close the function when the block depth goes
507 to zero. Pass value to debug_end_function.
508 (parse_stab_string): In case 'T', pass the name to
510 (parse_stab_type): In case 'x', use stab_find_tagged_type. In
511 case '#', handle functions with variable numbers of arguments.
512 (parse_stab_struct_type): Add tagname parameter. Change all
514 (parse_stab_members): Add tagname and typenums parameters. Change
515 all callers. If the type of a method is a stub, call
516 parse_stab_argtypes to demangle the argument types and get the
517 physical name of the function.
518 (parse_stab_argtypes): New static function.
519 (stab_record_variable): For a DEBUG_GLOBAL or DEBUG_STATIC
520 variable, call debug_record_variable immediately.
521 (stab_find_tagged_type): New static function.
523 * debug.h (enum debug_type_kind): Add DEBUG_KIND_ILLEGAL.
524 (struct debug_write_fns): Add field ellipsis_type. Add id
525 parameter to start_struct_type, start_class_type, and tag_type.
526 (debug_make_ellipsis_type): Declare.
527 (debug_find_named_type): Declare.
528 (debug_get_type_kind): Declare.
529 (debug_get_return_type): Declare.
530 (debug_get_parameter_types): Declare.
531 (debug_get_fields): Declare.
532 (debug_get_field_type): Declare.
533 * debug.c (struct debug_handle): Add fields class_id and base_id.
534 (struct debug_class_type): Add field id.
535 (struct debug_method_variant): Rename argtypes to physname.
537 (debug_ellipsis_type): New static variable.
538 (ELLIPSIS_P): New macro.
539 (debug_make_ellipsis_type): New function.
540 (debug_make_method_variant): Rename argtypes to physname.
541 (debug_make_static_method_variant): Likewise.
542 (debug_name_type): Always put types in the global namespace.
543 (debug_find_named_type): New function.
544 (debug_find_tagged_type): Treat DEBUG_KIND_ILLEGAL specially,
545 rather than DEBUG_KIND_VOID.
546 (debug_get_real_type): New static function.
547 (debug_get_type_kind): New function.
548 (debug_get_return_type): New function.
549 (debug_get_parameter_types): New function.
550 (debug_get_fields): New function.
551 (debug_get_field_type): New function.
552 (debug_write): Initialize base_id.
553 (debug_write_type): Pass new id argument to tag_type. Handle
554 DEBUG_KIND_ILLEGAL. Use id for DEBUG_KIND_STRUCT and
555 DEBUG_KIND_UNION. Handle ellipsis for method arguments.
556 (debug_write_class_type): Don't dereference kclass if it is NULL.
558 * prdbg.c (pr_fns): Add pr_ellipsis_type.
559 (pr_ellipsis_type): New static function.
560 (pr_pointer_type): If this is a pointer to an array, parenthesize
562 (pr_start_struct_type): Add id parameter.
563 (pr_start_class_type): Likewise.
564 (pr_tag_type): Likewise.
565 (pr_fix_visibility): Add the visibility to the top of the stack,
566 not the second element on the stack.
567 (pr_struct_field): Pop the stack before calling pr_fix_visibility.
568 (pr_class_static_member): Likewise.
569 (pr_class_start_method): Don't push a type, just set the method
570 name in the type on the top of the stack.
571 (pr_class_end_method): Don't pop the stack.
572 (pr_class_method_variant): Rename argtypes parameter to physname.
573 Append const and volatile rather than prepending them. Add a
574 space after the physname.
575 (pr_class_static_method_variant): Likewise.
576 * ieee.c (ieee_fns): Add ieee_ellipsis_type.
577 (ieee_define_named_type): Use DEBUG_KIND_ILLEGAL rather than
579 (write_ieee_debugging_info): Likewise.
580 (ieee_typdef): Likewise.
581 (ieee_ellipsis_type): New static function.
582 (ieee_start_struct_type): Add id parameter.
583 (ieee_start_class_type): Likewise.
584 (ieee_tag_type): Likewise.
585 (ieee_class_method_variant): Rename name to physname.
586 (ieee_class_static_method_variant): Likewise.
588 * Makefile.in (DEBUG_OBJS): Remove prdbg.o.
589 ($(OBJDUMP_PROG)): Depend upon, and link against, prdbg.o.
591 Thu Jan 18 17:35:06 1996 Kim Knuttila <krk@cygnus.com>
593 * dlltool.c (make_tail): Changed the order of the sections to avoid
594 an alignment problem.
596 Wed Jan 17 14:23:00 1996 J.T. Conklin <jtc@rtl.cygnus.com>
598 * srconv.c (wr_du): Set du.stackfrmt to 0.
599 (wr_un, wr_sc): Emit all sections, even those with 0 size.
601 Tue Jan 16 16:15:49 1996 J.T. Conklin <jtc@rtl.cygnus.com>
603 * srconv.c (wr_hd): Space size within segment was being
604 stored in segment identifier field.
606 Tue Jan 16 12:07:25 1996 Stan Shebs <shebs@andros.cygnus.com>
608 * mpw-config.in (BUILD_NLMCONV, BUILD_SRCONV, SYSINFO_PROG,
609 BUILD_DLLTOOL): Put definitions for these into makefile when
610 configuring, instead of always clearing in mpw-make.sed.
611 * mpw-make.sed: Edit out any host_alias or target_alias settings,
612 fix pathname to BFD internal include files, remove dependency
615 Thu Jan 11 17:31:38 1996 Michael Meissner <meissner@tiktok.cygnus.com>
617 * objdump.c (dump_section_header): Add new section flags
618 SEC_{EXCLUDE,SORT_ENTRIES}.
620 Thu Jan 11 11:45:34 1996 Ian Lance Taylor <ian@cygnus.com>
622 * objcopy.c (filter_symbols): NULL terminate the output symbols.
623 (copy_object): Allocate space for a possible extra NULL pointer.
625 * debug.c (debug_make_undefined_tagged_type): Make sure we are
626 given a kind of type we can handle.
627 (debug_write_type): Handle undefined enums and structs.
628 (debug_write_class_type): Handle undefined classes.
629 * prdbg.c (pr_enum_type): Handle an undefined enum.
630 * ieee.c (ieee_enum_type): Likewise.
632 Wed Jan 10 15:33:18 1996 Ian Lance Taylor <ian@cygnus.com>
634 * Makefile.in: Updated dependencies.
635 (ALLOCA, MALLOC): Remove variables.
636 (ADDL_LIBS): Remove $(MALLOC) from definition.
637 * alloca.c, gmalloc.c: Remove.
639 Mon Jan 8 18:02:29 1996 Ian Lance Taylor <ian@cygnus.com>
641 * ieee.c: Add global function write_ieee_debugging_info and a
642 bunch of static functions and structs used to write out IEEE
643 debugging information.
644 * budbg.h (write_ieee_debugging_info): Declare.
646 * ieee.c (struct ieee_type): Add pslot field.
647 (enum builtin_types): Define.
648 (ieee_builtin_type): For a pointer, return a pointer to the named
649 type. Use enum values rather than numbers.
650 (ieee_alloc_type): New static function.
651 (ieee_read_type_index): Use ieee_alloc_type.
652 (parse_ieee_bb): Likewise.
653 (parse_ieee_ty): Likewise. Use ieee_builtin_type for array range,
654 rather than making a new integer type. Store the new type in the
655 slot, if there is one.
656 (parse_ieee_atn): Treat ATN10 as defining a register variable.
657 (ieee_regno_to_genreg): Rename from ieee_regno_to_gen. Change all
659 (ieee_genreg_to_regno): New static function.
661 * stabs.c (parse_stab_type): Add new typename parameter. Change
663 (parse_stab_range_type): Add new typename parameter. Change all
666 * debug.h (struct debug_write_fns): Add tag parameter to
667 enum_type, start_struct_type, and start_class_type.
668 * debug.c (debug_write_type): Pass any tag name to
669 start_struct_type, debug_write_class_type, and enum_type. If
670 DEBUG_KIND_TAGGED, pass the name in the recursive call.
671 (debug_write_class_type): Accept a new tag parameter, and pass it
673 * prdbg.c (pop_type): Don't remove '+' character.
674 (pr_enum_type): Accept and use tag parameter.
675 (pr_start_struct_type): Likewise.
676 (pr_start_class_type): Likewise.
677 (pr_class_baseclass): Adjust algorithm used to find where to put
679 (pr_tag): Don't bother to insert the tag name.
681 * objcopy.c: Include budbg.h.
682 (convert_debugging): New static variable.
683 (OPTION_DEBUGGING): Define.
684 (copy_options): Add "debugging".
685 (copy_usage): Mention --debugging.
686 (is_strip_section): Skip debugging sections if convert_debugging.
687 (setup_section, copy_section): Likewise.
688 (filter_symbols): Skip debugging symbols if convert_debugging.
689 (copy_object): If convert_debugging, read and write debugging
691 (write_debugging_info): New static function.
692 (copy_main): Handle --debugging.
693 * Makefile.in (DEBUG_OBJS): New variable.
694 ($(OBJCOPY_PROG)): Depend upon and link against $(DEBUG_OBJS).
695 ($(STRIP_PROG)): Likewise.
696 (OBJDUMP_OBJS): Remove variable.
697 ($(OBJDUMP_PROG)): Use objdump.o $(DEBUG_OBJS) rather than
699 * binutils.texi, objcopy.1: Document --debugging.
701 Thu Jan 4 16:31:21 1996 Ian Lance Taylor <ian@cygnus.com>
703 * ieee.c: New file with code to read IEEE debugging information.
704 * budbg.h (parse_ieee): Declare.
705 * rddbg.c (read_debugging_info): Handle IEEE flavour files.
706 (read_ieee_debugging_info): New static function.
707 * Makefile.in: Rebuild dependencies.
708 (CFILES): Add ieee.c.
709 (OBJDUMP_OBJS): Add ieee.o.
711 * bucomm.h (xrealloc): Change type of first parameter from char *
714 Tue Jan 2 17:44:07 1996 Ian Lance Taylor <ian@cygnus.com>
716 * Makefile.in: Add targets to automatically rebuild dependencies.
717 Remove targets which just listed dependencies of .o files.
719 (HFILES, GENERATED_HFILES): New variables.
720 (CFILES, GENERATED_CFILES): New variables.
721 (underscore.c): Don't do anything, just depend upon stamp-under.
722 (stamp-under): New target; do what underscore.c used to do.
723 (nlmconv.o): Depend upon sym.h and ecoff.h.
724 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
725 (stage1, stage2, stage3, against, comparison): Remove.
726 (de-stage1, de-stage2, de-stage3): Remove.
727 (clean, distclean): Remove stamp-under and dep.sed.
728 * dep-in.sed: New file.
730 Implement generic debugging support. Implement a stabs reader and
732 * budbg.h, debug.c, debug.h, prdbg.c, rddbg.c, stabs.c: New files.
733 * objdump.c: Include "debug.h" and "budbg.h".
734 (dump_debugging): New global variable.
735 (usage): Mention --debugging.
736 (long_options): Add "debugging".
737 (display_bfd): Handle --debugging.
738 * Makefile.in (OBJDUMP_OBJS): New variable.
739 ($(OBJDUMP_PROG)): Use $(OBJDUMP_OBJS).
740 * binutils.texi, objdump.1: Document --debugging.
742 Sat Dec 30 09:59:51 1995 Jeffrey A Law (law@cygnus.com)
744 * nm.c ( long_options): Add "--defined-only" option.
745 (usage): Update for new "--defined-only" option.
746 (filter_symbols): Handle "--defined-only".
748 Fri Dec 29 16:04:56 1995 Ian Lance Taylor <ian@cygnus.com>
750 * arparse.y: Include "bucomm.h", not <sysdep.h>.
751 * nlmheader.y: Don't include "sysdep.h".
753 Tue Dec 26 18:23:18 1995 Ian Lance Taylor <ian@cygnus.com>
755 * nm.c (print_symdef_entry): Check return value of
756 bfd_get_elt_at_index.
758 Sat Dec 23 11:03:16 1995 Michael Meissner <meissner@tiktok.cgynsu.com>
760 * configure.in (DLLTOOL_DEFS): Build dlltool for PowerPC if target
761 is powerpc*-*-win* in addition to powerpc*-*-*pe*.
763 Fri Dec 15 16:30:57 1995 Ian Lance Taylor <ian@cygnus.com>
765 * objdump.c (endian_string): New static function.
766 (display_target_list): Use it.
767 * nlmconv.c (main): Use new bfd_big_endian macro.
769 Fri Dec 15 07:51:34 1995 steve chamberlain <sac@slash.cygnus.com>
771 * dlltool.c (fill_ordinals): Start from 1 if no other instructions
774 Tue Dec 12 12:05:21 1995 Ian Lance Taylor <ian@cygnus.com>
776 * Makefile.in (clean): Remove $(DEMANGLER_PROG).1. From Ronald
777 F. Guilmette <rfg@monkeys.com>.
779 Mon Dec 11 14:33:05 1995 Stan Shebs <shebs@andros.cygnus.com>
781 * mac-binutils.r: Fix copyright and version strings.
783 * Makefile.in (version): Remove, no longer used.
785 Fri Dec 1 14:41:56 1995 Stan Shebs <shebs@andros.cygnus.com>
787 * mpw-make.sed (install, install-only): Edit in Mac-specific
790 Thu Nov 30 20:26:02 1995 Kim Knuttila <krk@cygnus.com>
792 * dlltool.c (ppc_jtab): The binary glue for PowerPC dll linkage,
793 including the return instruction.
794 sinfo: added a preferred alignment field.
795 (secdata): section data for the PowerPC version.
796 (make_one_lib_file): More symbols, More sections (pdata, rdata)
797 (make_tail): Use idata$6 instead of idata$7 for ppc. Also added a
798 NULL idata$3 descriptor (temporary).
800 Tue Nov 28 17:23:44 1995 Doug Evans <dje@canuck.cygnus.com>
802 * dlltool.c (fill_ordinals): Don't reference d_export_vec if
803 there are no exported functions.
805 Mon Nov 27 13:05:59 1995 Ian Lance Taylor <ian@cygnus.com>
807 * configure: Regenerate with autoconf 2.7.
809 Wed Nov 22 13:17:15 1995 Ian Lance Taylor <ian@cygnus.com>
811 * dlltool.c (fill_ordinals): Start assigning ordinals at 1.
813 * Makefile.in (EXPECT): Use $$r, not $${rootme}.
814 (check): Set r, not rootme.
816 Tue Nov 21 18:04:09 1995 Ian Lance Taylor <ian@cygnus.com>
818 * configure.in: Use BFD_NEED_DECLARATION.
819 * acconfig.h: Put NEED_DECLARATION_FPRINTF in @TOP@ section.
820 * configure, config.in: Rebuild with autoconf 2.6.
822 Fri Nov 17 10:34:37 1995 Ian Lance Taylor <ian@cygnus.com>
824 * Makefile.in (CC_FOR_TARGET): Use @host@ and @target@, not
825 $(host_canonical) and $(target_canonical).
827 Thu Nov 16 03:39:20 1995 Ken Raeburn <raeburn@cygnus.com>
829 Version 2.6 released.
830 * Makefile.in (VERSION): Update to 2.6.
832 Wed Nov 15 12:14:17 1995 Ian Lance Taylor <ian@cygnus.com>
834 * Makefile.in (CC_FOR_TARGET): Define.
835 (check): Pass CC and CFLAGS to runtest.
837 * nm.c (display_rel_file): Don't require a DYNAMIC object when
838 dumping the dynamic symbol table.
840 * objdump.c (compare_symbols): Sort global symbols before local
841 symbols before debugging symbols.
842 (objdump_print_address): Don't futz around looking for a global
843 symbol with the same value.
845 Tue Nov 14 17:19:11 1995 Ian Lance Taylor <ian@cygnus.com>
847 * dlltool.c: Use FOPEN_* macros rather than "r" or "w".
849 * dlltool.c (fill_ordinals): Correct memset call.
851 Sun Nov 12 12:56:05 1995 Stan Shebs <shebs@andros.cygnus.com>
853 * mpw-make.sed (DEMANGLER_PROG): Edit out attempts to do anything
856 Fri Nov 10 11:41:22 1995 Ian Lance Taylor <ian@cygnus.com>
858 * objcopy.c (setup_section): Copy the section lma independently of
861 Wed Nov 8 11:33:00 1995 Ian Lance Taylor <ian@cygnus.com>
863 * arsup.c (ar_open): Cast malloc return value.
865 Tue Nov 7 09:01:26 1995 Kim Knuttila <krk@cygnus.com>
867 * configure.in, configure (DLLTOOL_DEFS): Added ppc target.
868 * dlltool.c (MPPC): Added basic PPC definitions.
870 Tue Nov 7 14:02:57 1995 Ian Lance Taylor <ian@cygnus.com>
872 * configure.in: Don't treat rs6000-*-lynx* specially.
873 * configure: Rebuild.
874 * config/rslynx: Remove.
875 * Makefile.in: Remove @target_makefile_fragment@.
877 Mon Nov 6 15:00:50 1995 Ian Lance Taylor <ian@cygnus.com>
879 * bucomm.h: Include <sys/types.h>.
880 * ar.c: Don't include <sys/types.h> or <stdio.h>.
881 * bucomm.c, dlltool.c, nlmconv.c, objcopy.c, objdump.c: Likewise.
883 Fri Nov 3 12:38:09 1995 Ian Lance Taylor <ian@cygnus.com>
885 * objdump.c: Include <sys/types.h>.
887 Permit user to override DEMANGLER_PROG from command line. From
888 Manfred Hollstein <manfred@lts.sel.alcatel.de>.
889 * Makefile.in ($(DEMANGLER_PROG)): Depend upon
891 (install): Don't depend upon $(DEMANGLER_PROG).1. Only install
892 $(DEMANGLER_PROG).1 if $(DEMANGLER_PROG) is not empty.
894 Wed Nov 1 15:04:57 1995 Manfred Hollstein KS/EF4A 60/1F/110 #40283 <manfred@lts.sel.alcatel.de>
896 * Makefile.in (syslex.o): add -I$(srcdir) if compiling in a
899 Mon Oct 30 14:24:18 1995 Ian Lance Taylor <ian@cygnus.com>
901 * objdump.c (objdump_print_value): New static function.
902 (objdump_print_address): Use it. If we need the right section for
903 the symbol, and we can't find it, print an offset from the section
904 rather than using a symbol from some other section.
906 Thu Oct 26 10:23:14 1995 steve chamberlain <sac@slash.cygnus.com>
908 * dlltool.c (no_idata4, no_idata5): New.
909 (arm_jtab): Use correct encoding of jump instruction.
910 (usage, main, make_head, make_tail): Act on no_idata4, no_idata5.
912 Wed Oct 25 12:10:07 1995 Stan Shebs <shebs@andros.cygnus.com>
914 * mpw-make.sed: Edit paths to generated y.tab.[ch] files.
916 Fri Oct 20 18:40:34 1995 Ian Lance Taylor <ian@cygnus.com>
918 * binutils.texi: Change --with-targets to --enable-targets.
920 Thu Oct 19 17:47:41 1995 Fred Fish <fnf@cygnus.com>
922 * Makefile.in: Remove extraneous tab on otherwise empty line,
923 which confuses many non-GNU versions of "make".
925 Wed Oct 18 16:31:58 1995 steve chamberlain <sac@slash.cygnus.com>
927 * dlltool.c (i386_jtab, arm_jtab): New
928 (gen_lib_file): Rewritten to use bfd.
930 Fri Oct 13 16:10:07 1995 Michael Meissner <meissner@tiktok.cygnus.com>
932 * Makefile.in (install): Don't give error message if dlltool
935 Fri Oct 13 11:04:37 1995 steve chamberlain <sac@slash.cygnus.com>
937 * deflex.l: Allow quoting of IDs.
938 * defparse.y (%union): string deleted.
939 (command): DESCRIPTION takes ID.
940 * dlltool.c (gen_def_file): Quote outgoing name if
941 necessary. Preserve NONAME.
942 (gen_lib_file): Run ranlib.
943 (workout_prefix): Deleted.
944 (main, usage, long_options): Add --as, --ranlib, --ar options.
946 Wed Oct 11 13:36:13 1995 steve chamberlain <sac@slash.cygnus.com>
948 * dlltool.c (mtable): HOW_ALIGN_LONG, new.
950 (d_low_ord, d_high_ord, d_named_funcs): New.
951 (gen_exp_file): Create noname entries correctly.
952 (gen_lib_file): Dump exports alphabetically.
953 (process_duplicates): Count nonamed functions.
954 (fill_ordinals): Keep track of highest ord too.
955 (mangle_defs): Create alphabetically ordered list of names.
957 Tue Oct 10 09:39:09 1995 steve chamberlain <sac@slash.cygnus.com>
959 * Makefile.in (TOOL_PROGS): Include DLLTOOL_PROG.
961 Mon Oct 9 13:06:31 1995 steve chamberlain <sac@slash.cygnus.com>
963 * dlltool.c (add_underscore): New.
964 (xlate): Use new name.
965 (main, usage): Update.
967 Fri Oct 6 14:08:51 1995 Ken Raeburn <raeburn@cygnus.com>
969 * sysinfo.y: Eliminate unused terminals "[" and "]" and unused
970 nonterminal "name". One s/r conflict remains.
972 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
974 * nm.c (print_symname): Don't try to demangle an empty
976 * objdump.c (slurp_symtab): Reset symcount if there are
978 (slurp_dynamic_symtab): Likewise, for dynsymcount.
979 (disassemble_data): Fix memory leak: free sorted_syms when done.
980 (display_bfd): Likewise, for syms and dynsyms.
981 (dump_relocs): Don't print header before possibly generating an
983 (dump_dynamic_relocs): Likewise.
985 * ar.1, nm.1, objdump.1, size.1, strings.1, strip.1: Fix typos and
988 Fri Oct 6 12:00:25 1995 Ian Lance Taylor <ian@cygnus.com>
990 * ar.c (do_quick_append): Comment out.
991 (replace_members): Add quick argument.
992 (main): Don't call do_quick_append.
993 (open_inarch): Don't call quick_append to create an empty archive.
994 Instead call bfd_openw/bfd_set_format/bfd_close.
996 Thu Oct 5 20:53:08 1995 Ken Raeburn <raeburn@cygnus.com>
998 * bucomm.c: Always include time.h.
1000 Thu Oct 5 17:25:21 1995 Ian Lance Taylor <ian@cygnus.com>
1002 * objdump.c (compare_symbols): Sort gnu_compiled and gcc2_compiled
1003 symbols after other symbols with the same value. Likewise for
1004 symbols which look like file names.
1005 (objdump_print_address): Always chose the first reasonable symbol
1008 Tue Oct 3 22:38:55 1995 Ian Lance Taylor <ian@cygnus.com>
1010 * arsup.c (ar_save): Use rename, not unlink/link/unlink.
1012 Mon Oct 2 12:10:25 1995 Ian Lance Taylor <ian@cygnus.com>
1014 * strings.c (main): Exit with zero status if no files are given
1015 and standard input is read.
1017 Thu Sep 28 20:03:07 1995 Stan Shebs <shebs@andros.cygnus.com>
1019 * mpw-config.in: Calculate underscore and put into makefile
1020 fragment, generate config.h.
1021 * mpw-make.sed: New file, sed commands to edit Unix makefile
1023 * mpw-make.in: Remove.
1024 * mac-binutils.r: New file, Mac resources.
1026 Thu Sep 28 15:49:00 1995 steve chamberlain <sac@slash.cygnus.com>
1028 * dlltool.c: (gen_exp_file): Always emit a .reloc section if
1030 (imp_name_lab): New.
1031 (gen_def_file): New.
1032 (gen_lib_file): Use imp_name_lab.
1033 (main): Initialize imp_name_lab.
1035 Mon Sep 25 12:05:34 1995 Ian Lance Taylor <ian@cygnus.com>
1037 * configure.in: Call AC_HEADER_SYS_WAIT.
1038 * configure: Rebuild.
1039 * config.in: Rebuild.
1040 * dlltool.c: Include "libiberty.h" and "bucomm.h". Don't include
1041 <stdio.h>, <stdlib.h>, or <string.h>. Don't include <wait.h>.
1042 Include <sys/types.h>. Use HAVE_SYS_WAIT_H to control whether to
1043 include <sys/wait.h> or define the wait macros by hand. Don't
1045 (gen_lib_file): Don't assume that sprintf returns the number of
1046 characters; use strlen instead.
1048 Fri Sep 22 17:16:41 1995 Ian Lance Taylor <ian@cygnus.com>
1050 * objdump.c (disassemble_data): Don't use the old BFD based
1051 disassembler interface. Make info a const pointer.
1053 Wed Sep 13 18:33:44 1995 Ian Lance Taylor <ian@cygnus.com>
1055 * objdump.c (start_address): New variable.
1056 (stop_address): New variable.
1057 (usage): Mention --start-address and --stop-address.
1058 (OPTION_START_ADDRESS, OPTION_STOP_ADDRESS): Define.
1059 (long_options): Add "start-address" and "stop-address".
1060 (disassemble_data): Handle start_address and stop_address.
1061 (dump_data, dump_reloc_set): Likewise.
1062 (main): Don't set seenflag for -l. Handle OPTION_START_ADDRESS
1063 and OPTION_STOP_ADDRESS.
1064 * objcopy.c (parse_vma): Move to bucomm.c.
1065 * bucomm.c (parse_vma): New function, moved in from objcopy.c.
1066 * bucomm.h (parse_vma): Declare.
1067 * binutils.texi, objdump.1: Document new objdump options.
1069 Tue Sep 12 12:37:39 1995 Ian Lance Taylor <ian@cygnus.com>
1071 * Makefile.in (maintainer-clean): New target.
1073 * ar.c (replace_members): Don't call write_archive if nothing
1076 * objdump.c (disassemble_data): Add casts to avoid gcc warnings.
1078 Thu Sep 7 12:12:17 1995 Ian Lance Taylor <ian@cygnus.com>
1080 * config.in: Rename from config.h.in.
1081 * configure.in: Call AC_CONFIG_HEADER with config.h:config.in.
1082 Check for config.h:config.in when creating stamp-h.
1083 * configure: Rebuild.
1084 * Makefile.in (stamp-h): Depend upon config.in rather than
1085 config.h.in. Set CONFIG_HEADERS to config.h:config.in when
1086 calling config.status.
1088 * Makefile.in (distclean): Remove config.h, stamp-h, and
1091 * nm.c (value_format): Initialize based on BFD64 and
1092 BFD_HOST_64BIT_LONG.
1093 (print_radix): New static variable.
1094 (set_print_radix): Set print_radix. Adjust changes to
1096 (print_value): New static function, to print 64 bit octal and
1097 decimal values correctly.
1098 (print_symbol_info_bsd): Check BFD64, not BFD_HOST_64_BIT. Use
1100 (print_symbol_info_sysv): Use print_value.
1101 (print_symbol_info_posix): Likewise.
1103 Wed Sep 6 15:02:55 1995 Ian Lance Taylor <ian@cygnus.com>
1105 * Makefile.in (*.o): Remove incorrect dependencies on
1106 $(BFDDIR)/hosts/std-host.h.
1108 * Makefile.in (INSTALL_DATA): Add -m 644.
1109 (INSTALL_XFORM1): Likewise.
1110 (CC_FOR_BUILD): Set to @CC_FOR_BUILD@ rather than $(CC).
1111 (mostlyclean): Remove config.log.
1112 (distclean): Remove config.cache.
1114 * configure.in: Call BFD_CC_FOR_BUILD and BFD_BINARY_FOPEN.
1115 * configure: Rebuild.
1117 Tue Sep 5 20:22:42 1995 Ian Lance Taylor <ian@cygnus.com>
1119 * configure.in: Rewrite to use autoconf.
1120 * aclocal.m4: New file.
1121 * configure: New file, built by autoconf.
1122 * acconfig.h: New file.
1123 * config.h.in: New file, built by autoheader.
1124 * Makefile.in: Various changes for new configure script. Also:
1125 (PROGS): Remove $(SYSINFO_PROG).
1126 (ALL_CFLAGS): Remove $(TDEFINES).
1127 (version.o): Use $(ALL_CFLAGS).
1128 (cplus-dem.o, dlltool.o, nlmconv.o): Likewise.
1129 (sysdump.o): Depend upon bucomm.h and config.h.
1130 (srconv.o, arsup.o, strings.o): Depend upon config.h.
1131 (filemode.o): Don't depend upon ../bfd/sysdep.h.
1132 (bucomm.o): Depend upon config.h, not ../bfd/sysdep.h.
1133 (size.o, objdump.o, nm.o, ar.o, objcopy.o): Likewise.
1134 (nlmheader.o, nlmconv.o): Likewise.
1135 (distclean): Don't remove sysdep.h.
1136 * bucomm.h: Include "ansidecl.h", <stdio.h>, and "config.h".
1137 Include "fopen-same.h" or "fopen-bin.h", based on
1138 USE_BINARY_FOPEN. Include <errno.h>, and declare errno if it is
1139 not a macro. Include <unistd.h>, <string.h>, <strings.h>,
1140 <stdlib.h>, and <fcntl.h> if they are present. Declare strchr,
1141 strrchr, and strstr if no string header file exists. Include
1142 <sys/file.h> if it exists and <fcntl.h> does not. Define
1143 O_RDONLY and O_RDWR if necessary.
1144 * ar.c: Don't include "sysdep.h". Do include <sys/types.h> and
1145 <sys/stat.h>. Use HAVE_GOOD_UTIME_H rather than POSIX_UTIME. Use
1146 HAVE_UTIMES rather than !USE_UTIME. Don't include <errno.h>, and
1147 don't declare errno.
1148 * arsup.c: Don't include <sysdep.h>.
1149 * bucomm.c: Don't include "sysdep.h". Include <stdio.h>,
1150 <sys/types.h>, and <sys/stat.h>. Include <time.h> if it defines
1151 time_t. Define time_t if necessary.
1152 * coffdump.c: Don't include "sysdep.h".
1153 * coffgrok.c, filemode.c, nlmconv.c, size.c: Likewise.
1154 * srconv.c, strings.c: Likewise.
1155 * nm.c: Don't include "sysdep.h". Don't try to define HAVE_SBRK.
1156 * objcopy.c: Don't include "sysdep.h". Include <sys/types.h> and
1158 (simple_copy): Use creat rather than assuming that O_CREAT is
1160 * objdump.c: Don't include "sysdep.h". Use
1161 NEED_DECLARATION_PRINTF rather than !FPRINTF_ALREADY_DECLARED.
1162 * sysdump.c: Include "bfd.h" and "bucomm.h". Don't include
1163 "sysdep.h" or <stdlib.h>.
1164 (dump_symbol_info): Rename from symbol_info. Change all callers.
1166 Mon Sep 4 14:30:00 1995 Ian Lance Taylor <ian@cygnus.com>
1168 * configure.in (host_makefile_frag): Don't set. Substitute for
1169 @CC@, @CFLAGS@, @HDEFINES@ and @LDFLAGS@ in Makefile.
1170 * Makefile.in (AR_FLAGS): Set to rc rather than qv.
1171 (CC): Define as @CC@.
1172 (CFLAGS): Set to @CFLAGS@.
1173 (LDFLAGS): Define as @LDFLAGS@.
1174 (ALL_CFLAGS): Use @HDEFINES@ rather than $(HDEFINES).
1176 * configure.in: Don't bother to call config.bfd for each target.
1177 Just call it for the default target, and use the shell variable to
1178 decide whether underscores are used.
1180 Thu Aug 31 19:21:48 1995 Jason Molenda (crash@phydeaux.cygnus.com)
1182 * configure.in: match i[3-6]86-*-win32, not just i386-*-win32.
1184 Thu Aug 31 16:30:22 1995 steve chamberlain <sac@slash.cygnus.com>
1186 * dlltool.c (add_indirect): New.
1188 (gen_exp_file): Timestamp should be 0. Insert prefix when
1189 needed. New code for indirection.
1190 (gen_lib_file): Timestamp should be 0. Insert prefix
1192 (usage): Document --add-indirect.
1193 (main): Cope with new option.
1195 * objdump.c (dump_private_headers): New.
1196 (usage): Document new option.
1197 (long_option): Add private-headers.
1198 (dump_bfd_private_header): New.
1199 (main): Cope with new option.
1201 Thu Aug 31 04:09:16 1995 Doug Evans <dje@canuck.cygnus.com>
1203 * dlltool.c (run): Add missing 3rd arg to waitpid.
1205 Wed Aug 30 11:02:11 1995 steve chamberlain <sac@slash.cygnus.com>
1207 * Makefile.in (TOOL_PROGS): Include dlltool if needed.
1209 Tue Aug 29 13:25:21 1995 steve chamberlain <sac@slash.cygnus.com>
1211 * dlltool.c (rva): Deleted.
1212 (rvaafter, rva_before): Use new assembler pseudo.
1213 (flush_page, gen_exp_file, gen_lib_file): Use new way of RVAing.
1214 (gen_exp_file): Don't generate .edata if no need.
1215 (gen_lib_file): Don't make timestamp.
1216 Put _iname in idata$7.
1217 (workout_prefix): Fix memory initialization bug.
1218 (usage): Tidy up, delete many single char options.
1219 (main): rva option is gone.
1221 Mon Aug 21 18:41:28 1995 steve chamberlain <sac@slash.cygnus.com>
1223 * dlltool.c (options): image-base is a synonym for rva.
1224 (gen_lib_file): Put dll name into ibase$7.
1226 Sun Aug 20 09:59:00 1995 steve chamberlain <sac@slash.cygnus.com>
1228 Modified to generate archives and objects rather than .s files.
1229 * dlltool.c (run) New function.
1230 (gen_exp_file, gen_lib_file): Use run.
1231 (workout_prefix): New.
1232 (usage): Document new options.
1233 (main): Parse new options.
1235 Wed Aug 16 16:26:52 1995 steve chamberlain <sac@slash.cygnus.com>
1237 * dlltool.c (gen_exp_file): Fix RVA handling.
1238 (rva_s, rva_n): Delete.
1240 Fri Aug 11 18:27:18 1995 Ian Lance Taylor <ian@cygnus.com>
1242 * nm.c (main): Ignore -e.
1244 Thu Aug 10 17:35:00 1995 Ken Raeburn <raeburn@cygnus.com>
1246 * Makefile.in (config.texi): New target. Write out a setting for
1247 texinfo variable VERSION.
1248 (binutils.dvi, binutils.info): Depend on it.
1249 * binutils.texi: Include it, and reference @value{VERSION} instead
1250 of explicitly specifying 2.2(!).
1252 Thu Aug 10 16:07:53 1995 Ian Lance Taylor <ian@cygnus.com>
1254 * coffgrok.c (do_type): Handle array dimensions the same way gdb
1257 Tue Aug 8 17:10:42 1995 steve chamberlain <sac@slash.cygnus.com>
1259 * dlltool.c (mtable): New fields.
1260 (ASM_RVA_BEFORE, ASM_RVA_AFTER): New.
1261 (flush_page): Use new macros.
1263 Sat Aug 5 00:16:37 1995 Jeff Law (law@snake.cs.utah.edu)
1265 * objcopy.c (mark_symbols_used_in_relocations): Handle sections
1266 with no relocations.
1267 * coffgrok.c (do_sections_p1): Likewise.
1269 Mon Jul 31 12:51:06 1995 Ian Lance Taylor <ian@cygnus.com>
1271 * strings.c (print_strings): For compatibility with existing
1272 strings programs, print strings which are not terminated with a
1273 null byte or a newline.
1274 * binutils.texi, strings.1: Update documentation accordingly.
1276 * ar.c (replace_members): For compatibility with existing ar
1277 programs, permit users to add the same file multiple times.
1279 Tue Jul 25 11:21:53 1995 Ian Lance Taylor <ian@cygnus.com>
1281 * strings.c (DATA_FLAGS): Remove SEC_DATA.
1282 (main): If no file names are given, scan standard input.
1283 * binutils.texi, strings.1: strings now scans non-data sections by
1286 Mon Jul 24 13:52:28 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1288 * srconv.c (wr_hd): Set afl field to 4 for bfd_arch_sh.
1289 (writeINT): When size == -2, use 2 bytes for the h8300 and 4 bytes
1292 * sysdump.c (fillup): Return size - 1, the last byte is a checksum
1293 and shouldn't be counted.
1294 * sysroff.info (hd): Changed segment identifier from a byte to a 1
1295 bit field. The sysroff 2.0-01 specification seems to be in error
1296 here. Reduce width of following "spare" field from 4 to 3 bits.
1297 (rl): Changed order and width of first 4 bitfields to correspond
1298 to sysroff specification.
1299 (dln_head, dln_inside, dln_tail): Removed.
1301 Tue Jul 18 23:00:03 1995 Fred Fish <fnf@cygnus.com>
1303 * nm.c (sort_symbols_by_size): Enclose expression being casted
1304 in parens so result is casted, not just first operand. Can't
1305 do pointer arithmetic on void* pointers.
1307 Fri Jul 14 13:42:42 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1309 * sysdump.c (dh): Changed format of output to be 16 hex digits
1310 followed by 16 ascii characters, similar to Emacs' hexl-mode,
1311 to make it easier to read.
1312 (xcalloc): fix typo.
1314 Thu Jul 13 15:27:44 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1316 * srconv.c (wr_tr): Write out handcrafted tr block.
1317 (walk_tree_symbol): Use evallen and evalue instead of
1318 vallen & value because of corresponding changes in
1321 * sysdump.c (sysroff_swap_tr_in, sysroff_print_tr_out): New
1324 * sysroff.info (tr): the tr block is a special case --- a block
1325 without contents --- which can't be handled by generated code.
1326 (den, dpp): only first byte is present for DENend, DPPend.
1327 (dsy): describe a conditional portion of block, rename some fields.
1328 (dps): describe a conditional portion of block.
1331 * sysinfo.y (yyerror): write error message to standard error.
1333 Thu Jul 13 10:43:59 1995 Ian Lance Taylor <ian@cygnus.com>
1335 * Makefile.in (DISTSTUFF): Add arparse.h and sysinfo.h.
1336 (mostlyclean): Remove y.output.
1337 (clean): Remove sysroff, sysroff.c, sysroff.h, and sysinfo.
1339 * nlmconv.c (powerpc_mangle_relocs): Cast memset arg to size_t.
1340 * objcopy.c (copy_object): Likewise.
1342 * nm.c (HAVE_SBRK): Define execpt on amigados and WINDOWS_NT.
1343 (struct size_sym): Define.
1344 (show_stats): New static variable.
1345 (long_options): Add undocumented option "stats".
1346 (main): Print memory stats if requested.
1347 (sort_bfd, sort_dynamic, sort_x, sort_y): New static variables.
1348 (numeric_forward): Use minisymbols rather than asymbols.
1349 (non_numeric_forward): Likewise.
1350 (size_forward1): Rename from size_forward. Use minisymbols.
1351 (size_forward2): New static function.
1352 (sort_symbols_by_size): Take new arguments dynamic, size, and
1353 symsizep. Use minisymbols. Don't store the size back in the
1354 symbol; store in a newly allocate struct size_sym array.
1355 (display_rel_file): Read minisymbols rather than asymbols. Set
1356 sort_* variables. Call print_size_symbols if sorting by size.
1357 (filter_symbols): Take new arguments dynamic and size. Use
1359 (print_symbols): Likewise. Call print_symbol for actual printing.
1360 (print_size_symbols): New static function.
1361 (print_symbol): New static function.
1363 Wed Jul 12 10:43:05 1995 Ian Lance Taylor <ian@cygnus.com>
1365 * objdump.c (dump_section_stabs): Only print each stabs section
1367 (compare_relocs): Make it clear to gcc that this always returns a
1370 Wed Jul 12 10:40:23 1995 H.J. Lu <hjl@nynexst.com>
1372 * objcopy.c (simple_copy): Preserve errno on failure.
1373 (smart_rename): Print error mesage if simple_copy fails.
1375 Tue Jul 11 13:10:52 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1377 * sysdump.c: re-indented file.
1378 (module): read blocks sequentially instead of trying to parse
1379 them, as that would require changing the parser recognize the
1380 difference between a DPSstart and DPSend block.
1381 (getone): Add break's between switch blocks as appropriate.
1382 (object_body_list): parse blocks according to sysroff spec.
1384 Mon Jul 10 12:37:25 1995 J.T. Conklin <jtc@poseidon.cygnus.com>
1386 * sysroff.info: re-indented file, prior formatting was confusing
1387 because it was indentation did not reflect nesting of conditional
1388 records. Change "space size within segment" record in hd record
1391 * sysinfo.y (cond_it_field): Use xcalloc instead of calloc.
1393 * srconv.c (wr_cs): Reformatted cs header array, tag each byte
1394 with a comment describing the field.
1395 (wr_unit_info): Use SEEK_SET macro instead of constant 0.
1396 (main): Use FOPEN_WB macro instead of literal "wb".
1397 * sysroff.info: Remove fdl (dfl) field from cs block. Compare
1398 ptr->type with ED_TYPE_CONST instead of constant 2 in ed block.
1400 Tue Jul 4 14:48:42 1995 Ian Lance Taylor <ian@cygnus.com>
1402 * nm.c (size_forward): Check yf against yn, not xn.
1404 * objcopy.c (copy_archive): Record all output BFD's, and close
1405 them before unlinking them and removing the temporary directory,
1406 to avoid NFS problems.
1408 * ar.c (replace_members): In verbose messages, use 'r' when
1409 replacing a member, and 'a' when adding one.
1411 * ar.c (ar_truncate): New static variable.
1412 (normalize): Change return type to const char *. Add abfd
1413 argument. Change all callers. If ar_truncate, chop the filename
1414 to abfd->ar_max_namelen.
1415 (main): For the 'f' modifier, set ar_truncate to true. Don't
1416 change quick_append to replace if ar_truncate is true.
1417 (do_quick_append): If ar_truncate, set BFD_TRADITIONAL_FORMAT.
1418 (write_archive): Likewise.
1419 * binutils.texi, ar.1: Document 'f' modifier.
1421 * objcopy.c (enum strip_action): Define strip_unneeded.
1422 (OPTION_STRIP_UNNEEDED): Define.
1423 (strip_options): Add "strip-unneeded".
1424 (copy_options): Likewise.
1425 (copy_usage): Mention --strip-unneeded.
1426 (strip_usage): Likewise.
1427 (is_strip_section): Strip debugging sections if strip_unneeded.
1428 (filter_symbols): If strip_unneeded, only keep BSF_KEEP symbols.
1429 (copy_object): If strip_all, discard symbols without checking
1431 (copy_object): Call filter_symbols if strip_unneeded.
1432 (setup_section): Strip debugging sections if strip_unneeded.
1433 (copy_section): Likewise.
1434 (strip_main): Handle OPTION_STRIP_UNNEEDED.
1435 (copy_main): Likewise.
1436 * binutils.texi, objcopy.1, strip.1: Document --strip-unneeded.
1438 Mon Jul 3 14:16:47 1995 Steve Chamberlain <sac@slash.cygnus.com>
1440 * configure.in (i386-*-win32): New configuration.
1441 * dlltool.c (killat, xlate, usage, long_options, main):
1442 Understand and cope with -k option.
1444 Sat Jul 1 12:25:15 1995 Fred Fish <fnf@cygnus.com>
1446 * ar.c: (extract_file): Change "#if POSIX_UTIME" to
1447 "#ifdef POSIX_UTIME" to match other tests of POSIX_UTIME
1448 and avoid lossage when POSIX_UTIME is not defined at all.
1450 Wed Jun 28 17:51:24 1995 Steve Chamberlain <sac@slash.cygnus.com>
1452 * ar.c: (print_contents.c, extract_file, do_quick_append):
1453 Malloc buffers rather than allocate on stack (so it works
1455 * deflex.l: Names can have an @ in them.
1456 * dlltool.c: Loads of stuff. Can now generate .imp files which
1459 Thu Jun 22 19:10:50 1995 Stan Shebs <shebs@andros.cygnus.com>
1461 * mpw-make.in (demangle.c.o): Remove.
1462 (arparse.h): Depend on arparse.c instead of arparse.y.
1464 Wed Jun 21 17:32:45 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1466 * Makefile.in (DISTSTUFF): Don't include info here.
1467 (diststuff): Include it here.
1468 (realclean): Remove *.info.
1470 * objdump.c (compare_relocs): If relocation entries have the same
1471 address, keep them in file order.
1473 Mon Jun 19 09:06:49 1995 Steve Chamberlain <sac@slash.cygnus.com>
1475 * dlltool.c: Change names of generated files. .*.s-> -*.s
1477 * objdump.c (dump_section_stabs): Check for names
1478 which are supersets of selected names.
1480 Wed Jun 14 19:43:52 1995 Doug Evans <dje@canuck.cygnus.com>
1482 * dlltool.c (mtable, ARM jump): Must redirect via pc offsetable ptr.
1484 Wed Jun 14 13:27:22 1995 Steve Chamberlain <sac@slash.cygnus.com>
1486 * deflex.l, defparse.y, dlltool.c: New files.
1487 * Makefile.in, configure.in: Support for them.
1489 Mon Jun 12 11:27:54 1995 Steve Chamberlain <sac@slash.cygnus.com>
1491 * sysdump.c: Include sysdep.h
1492 (main): Open input with FOPEN_RB.
1494 Fri Jun 9 17:26:11 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1496 * objdump.c (wide_output): New flag variable.
1497 (usage): Print new -w, --wide options.
1498 (long_options): Add --wide support.
1499 (dump_section_header): If --wide, don't print a newline between
1500 the section's first line and the flags.
1501 (objdump_print_address): Use unsigned comparisons for the binary
1503 (disassemble_data): If --wide, don't put a \n between the
1504 disassembly output and relocation information.
1505 (main): Support -w option being the same as --wide.
1507 Thu Jun 1 17:09:27 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1509 Sat May 6 08:52:24 1995 H.J. Lu (hjl@nynexst.com)
1511 * objcopy.c (smart_rename): make it smarter, clean up
1514 Tue May 30 14:24:15 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1516 * Makefile.in: Delete lines with lots of #### because four or more
1517 indicate a point for makefile fragment substitution.
1519 Tue May 9 17:17:05 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1521 * configure.in: Don't build nlmconv on PowerPC eabi any more, it
1524 Thu Apr 27 20:21:24 1995 Doug Evans <dje@canuck.cygnus.com>
1526 * Makefile.in (EXPECT): Define.
1527 (RUNTEST): Use one in source tree if present.
1528 (check): Set `rootme' for $(EXPECT).
1530 Wed Apr 26 18:26:21 1995 Steve Chamberlain <sac@slash.cygnus.com>
1532 * srconv.c (main): Add support for -n option which disables
1533 prescan of common symbols.
1534 (wr_ob): If reading past the end of a section, fill with zeros.
1536 Tue Apr 25 19:14:37 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1538 * objdump.c (dump_section_header): Display load address after
1539 virtual memory (run-time) address.
1541 Wed Apr 19 09:44:06 1995 Jason Merrill <jason@phydeaux.cygnus.com>
1543 * Makefile.in (cplus-dem.o): Pass -DVERSION='"$(VERSION)"' to the
1545 (DEMANGLER_PROG): No longer uses version.o.
1547 Mon Apr 10 13:29:49 1995 Stan Shebs <shebs@andros.cygnus.com>
1549 Merge in support for Mac MPW as a host.
1550 (Old change descriptions retained for informational value.)
1552 * mpw-config.in (TDEFINES): Define as empty in makefile frag.
1554 * mpw-config.in: Create mk.tmp, define ARCHDEFS in it.
1556 * mpw-config.in: New file, MPW configure fragment for binutils.
1557 * mpw-make.in (install-only): New target.
1558 (install): Also depend on install-only.
1560 * mpw-make.in (cplusfilt): Renamed from c++filt.
1561 (INCLUDES): Add more paths.
1563 * mpw-make.in: New file, MPW makefile fragment for binutils.
1564 (Normally automatically generated from Makefile.in.)
1566 Mon Mar 27 11:52:57 1995 Ian Lance Taylor <ian@cygnus.com>
1568 * ar.c (write_archive): Call make_tempname to get output file
1569 name, rather than using a fixed name based on the input file.
1571 * objcopy.c (make_tempname): Copy from here...
1572 * bucomm.c (make_tempname): ...to here, and make global.
1573 * bucomm.h (make_tempname): Declare.
1575 Fri Mar 24 11:47:42 1995 Ian Lance Taylor <ian@cygnus.com>
1577 * strings.c: Include "bfd.h" before other headers. Include
1579 * bucomm.c (print_arelt_descr): Cast st_uid and st_gid to long,
1580 and print them with %ld.
1582 Fri Mar 10 13:09:42 1995 Ian Lance Taylor <ian@cygnus.com>
1584 * objcopy.c (strip_options): Add --keep-symbol.
1585 (copy_options): Likewise.
1586 (copy_usage): Mention --keep-symbol and -K.
1587 (strip_usage): Likewise.
1588 (keep_symbols): New static variable.
1589 (is_strip_symbol): Adjust the return value according to
1591 (strip_main): Handle -K. For -N, check that -K was not given.
1592 (copy_main): Likewise.
1593 * binutils.texi, objcopy.1, strip.1: Document -K.
1595 Mon Mar 6 13:33:47 1995 Stan Shebs <shebs@andros.cygnus.com>
1597 * objcopy.c (copy_archive): Check result of mkdir.
1598 (copy_main): Cast an xmalloc result.
1600 * objdump.c (usage): Break long format string into shorter ones.
1602 Mon Mar 6 13:46:12 1995 Ian Lance Taylor <ian@cygnus.com>
1604 * bucomm.c (list_supported_targets): New function.
1605 * bucomm.h (list_supported_targets): Declare.
1606 * ar.c (usage): Call list_supported_targets.
1607 * nm.c (usage): Likewise.
1608 * objcopy.c (copy_usage, strip_usage): Likewise.
1609 * objdump.c (usage): Likewise.
1610 * size.c (usage): Likewise.
1611 * strings.c (usage): Likewise.
1613 Tue Feb 28 15:13:58 1995 Ian Lance Taylor <ian@cygnus.com>
1615 * bucomm.c (print_arelt_descr): Cast st_size to long before
1616 passing it to fprintf.
1618 Fri Feb 17 13:36:45 1995 Ian Lance Taylor <ian@cygnus.com>
1620 * objcopy.c (struct section_list): Add fields remove, set_flags,
1621 and flags. Change adjust from boolean to enum.
1622 (remove_sections): Remove static variable.
1623 (sections_removed): New static variable.
1624 (copy_options): Add --set-section-flags.
1625 (copy_usage): Mention --set-section-flags.
1626 (parse_flags): New static function.
1627 (find_section_list): New static function.
1628 (is_strip_symbol): Change return type from int to boolean.
1629 (is_strip_section): New static function.
1630 (filter_symbols): Call is_strip_section.
1631 (copy_object): When adding sections, check for specified flags or
1632 VMA. Call filter_symbols if any sections are being removed.
1633 (setup_section): Use find_section_list function rather than
1634 looking through remove_sections and adjust_sections. Handle
1635 --set-section-flags.
1636 (copy_section): Use find_section_list rather than looking through
1638 (strip_main): Use find_section_list instead of adding items to
1640 (copy_main): Use find_section_list instead of adding items to
1641 sections_removed and adjust_sections. Handle --set-section-flags.
1642 * binutils.texi, objcopy.1: Document --set-section-flags.
1644 Tue Feb 14 18:03:03 1995 Ian Lance Taylor <ian@cygnus.com>
1646 * objdump.c (with_source_code): New global variable.
1647 (usage): Mention -S/--source.
1648 (long_options): Add --source.
1649 (prev_functionname, prev_line): New static variables.
1650 (struct print_file_list): Define.
1651 (print_files): New static variable.
1652 (skip_to_line, show_line): New static functions.
1653 (disassemble_data): Call show_line to handle -l and -S.
1655 * binutils.texi, objdump.1: Document -S/--source.
1657 Thu Feb 9 16:11:53 1995 Ian Lance Taylor <ian@cygnus.com>
1659 * objcopy.c (copy_usage): Rename parameter to avoid shadowing.
1660 (strip_usage): Likewise.
1662 * objcopy.c (struct section_add): Define.
1663 (add_sections): New static variable.
1664 (copy_options): Accept --add-section.
1665 (copy_usage): Mention --add-section.
1666 (copy_object): Add sections from the add_sections list.
1667 (copy_main): Handle --add-section.
1668 * binutils.texi, objcopy.1: Document --add-section.
1670 Wed Feb 1 15:04:57 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1672 * objdump.c (disassemble_data): Pass section offset, not absolute
1673 address, to bfd_find_nearest_line.
1675 * nlmconv.c (powerpc_mangle_relocs): Don't use const with
1678 Thu Jan 26 18:50:06 1995 Ian Lance Taylor <ian@cygnus.com>
1680 * objdump.c (compare_symbols): Use bfd_asymbol_value (VAR) rather
1682 (objdump_print_address): Likewise.
1683 (disassemble_data): Don't change the symbol values. It can
1684 confuse bfd_canonicalize_reloc.
1686 Thu Jan 26 12:03:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1688 * configure.in: Add support for powerpc-*-ebai.
1690 Wed Jan 18 10:02:12 1995 Steve Chamberlain <sac@splat>
1692 * coffdump.c: Include sysdep.h.
1693 (dump_coff_type): Handle coff_secdef_type.
1694 * coffgrok.c : Include sysdep.h.
1695 * srconv.c: Include libiberty.h
1696 (absolute_p, dty_start, dty_end, dump_tree_structure): Remove.
1698 Wed Jan 18 12:24:14 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1700 * coffdump.c (dump_coff_scope): Cast pointer to unsigned long for
1702 * coffgrok.c: Include bucomm.h. Don't declare xmalloc.
1703 (push_scope): Declare type of parameter link.
1704 * size.c: Include libiberty.h.
1705 * srconv.c: Include bucomm.h.
1706 (find_base): Declare at top of file.
1707 (wr_hd): Add default case to architecture switch.
1708 (wr_dps_start): Declare type of parameter nest.
1709 (wr_du): Comment out variables used only in commented out blocks.
1710 (wr_dus): Remove unused variable i.
1711 (wr_sc): Remove unused variables myinfo, low, and high.
1712 * strings.c: Include libiberty.h.
1713 * sysdump.c: Include <ctype.h>.
1715 Tue Dec 20 19:13:44 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1717 * ar.c (main): Ignore 'f' modifier used on HP/UX 9.
1719 Thu Dec 15 17:34:12 1994 Stan Shebs <shebs@andros.cygnus.com>
1721 * ar.c, nm.c, objcopy.c, objdump.c: Include progress.h.
1722 * ar.c, nm.c, objcopy.c, objdump.c (main): Add START_PROGRESS
1724 * ar.c (map_over_members, open_inarch): Call PROGRESS.
1725 * nm.c (main, display_archive, filter_symbols, print_symbols):
1728 * objcopy.c (copy_usage): Break up long usage string.
1730 Wed Dec 14 15:51:56 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1732 * objcopy.c (copy_object): Don't bother setting status after
1733 nonfatal() "call", because it won't return.
1735 Fri Dec 9 00:22:54 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1737 * nlmconv.c (powerpc_mangle_relocs): Don't switch a reloc to use
1738 the section symbol if the symbol is undefined.
1740 Thu Dec 8 14:45:50 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1742 * objcopy.c (add_strip_symbol): Cast return value of xmalloc.
1744 Wed Nov 30 11:05:43 1994 Ian Lance Taylor <ian@rtl.cygnus.com>
1746 * ar.c (replace_members): Pass current->filename to normalize when
1747 checking for duplicates, because the filename of a newly added
1748 file will not have been normalized yet.
1750 Thu Nov 17 15:00:13 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1752 * ar.c (main): Don't call do_quick_append if any of the archive
1753 names are longer than 14 characters.
1755 * objcopy.c (main): Fix is_strip test. From
1756 pirker@eiunix.tuwien.ac.at (Martin Pirker).
1758 Thu Nov 17 15:37:19 1994 Mark W. Eichin <eichin@cygnus.com>
1760 * objcopy.c (add_strip_symbol): New function, adds a name to an
1761 explicit list of symbols to strip.
1762 (is_strip_symbol): New function, reports whether the name argument
1763 is in the explicit list.
1764 (filter_symbols): Check against is_strip_symbol above all.
1765 (strip_main): Recognize -N option. If used, don't default to
1767 (copy_main): Recognize -N option.
1768 (strip_usage): Document -N and --strip-symbol options.
1769 (copy_usage): Ditto.
1770 * objcopy.1, strip.1, binutils.texi: Document -N and
1771 --strip-symbol options.
1773 Tue Nov 8 13:12:54 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1775 * objdump.c (display_target_list, display_info_table): Pass an
1776 array to tmparg, rather than NULL, since some systems can't handle
1779 * objcopy.c (copy_archive): Keep a list of the names of the
1780 temporary files we created. Close each input BFD after we open
1783 Mon Nov 7 15:48:39 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1785 * Makefile.in (VERSION): Bump to 2.5.3.
1787 Thu Nov 3 19:04:34 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1789 * Makefile.in (install-info): Install info files from whatever
1790 directory they were found in.
1792 Patch from DJ Delorie:
1793 * configure.bat: do c++filt -> cxxfilt right
1795 * sysinfo.y: Include system header files early, so any potential
1796 declaration of abort() occurs before its use.
1798 * strings.c (strings_file): Try opening the file in binary mode
1801 Wed Nov 2 15:44:13 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1803 * ar.c (main): Treat ar qs like ar rs.
1805 Tue Oct 25 16:19:25 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1807 * objcopy.c (gap_fill): Explicitly initialize, for clarity.
1808 (pad_to_set, pad_to): New static variables.
1809 (copy_options): Accept --pad-to.
1810 (copy_usage): Mention --pad-to.
1811 (copy_object): Support --pad-to.
1812 (compare_section_vma): Sort non loadable sections to the front.
1813 Sort sections with the same VMA by size.
1814 (copy_main): Handle --pad-to.
1815 * binutils.texi, objcopy.1: Document --pad-to.
1817 Thu Oct 20 13:51:31 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1819 * objcopy.c (gap_fill_set, gap_fill): New static variables.
1820 (copy_options): Accept --gap-fill.
1821 (copy_usage): Mention --gap-fill.
1822 (copy_object): Support --gap-fill.
1823 (get_sections, compare_section_vma): New static functions.
1824 (copy_main): Handle --gap-fill.
1825 * binutils.texi, objcopy.1: Document --gap-fill.
1827 Wed Oct 19 14:09:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1829 * Makefile.in (check): Add a dummy else clause to the if
1832 * objcopy.c (copy_object): Revert yesterday's change.
1833 * binutils.texi, objcopy.1: Remove special mention of --set-start
1834 and `binary' output format.
1836 Tue Oct 18 11:12:01 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1838 * objcopy.c (copy_object): If the output file format is `binary',
1839 and the start address was not set using --set-start, default the
1840 start address to zero. This hack is because the `binary' output
1841 file format uses the start address to set the virtual address of
1842 the first byte in the file.
1843 * binutils.texi, objcopy.1: Add some notes on generating S-records
1846 * nm.c (print_symdef_entry): Call print_symname to print the
1847 symbol name, so that --demangle works.
1849 * Makefile.in (mostlyclean): Remove tmpdir.
1851 * objcopy.c (struct section_list): Add fields used, adjust, val.
1852 (adjust_start, set_start_set, set_start): New static variables.
1853 (adjust_section_vma, adjust_sections): New static variables.
1854 (copy_options): Add --adjust-start, --adjust-vma,
1855 --adjust-section-vma, --adjust-warnings, --no-adjust-warnings,
1857 (parse_vma): New static function.
1858 (copy_usage): Mention new options.
1859 (copy_object): Handle --set-start and --adjust-start.
1860 (setup_section): Correct type of last argument to PTR. Set used
1861 field if section is removed. Handle --adjust-vma and
1862 --adjust-section-vma.
1863 (copy_section): Correct type of last argument to PTR.
1864 (mark_symbols_used_in_relocations): Likewise.
1865 (strip_main): Clear used field when handling -R.
1866 (copy_main): Handle new options.
1867 * binutils.texi (objcopy): Document new options.
1868 * objcopy.1: Document new options.
1870 Fri Oct 14 14:38:13 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1872 * configure.in (configdirs): Remove definition--testsuite is no
1874 * Makefile.in (testsuite): Remove target.
1875 (site.exp): New target.
1877 (clean, distclean): Don't recur into testsuite directory.
1879 Thu Oct 13 19:24:09 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1881 * Makefile.in (VERSION): Updated to 2.5.
1882 * Version 2.5 released.
1884 Tue Oct 11 15:26:42 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1886 * Makefile.in (sysdump.o): Depends upon sysroff.c.
1888 Mon Oct 10 13:50:30 1994 J.T. Conklin (jtc@rtl.cygnus.com)
1890 * nlmconv.c (link_inputs): Pass -Ur flag to ld so that the
1891 ctor/dtor tables needed by C++ programs are built.
1893 Sun Oct 9 18:04:00 1994 Jim Wilson (wilson@sphagnum.cygnus.com)
1895 * Makefile.in (srconv.o): Add dependence on sysroff.c.
1897 Tue Oct 4 12:19:51 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1899 * configure.in: Use ${config_shell} when running config.bfd.
1901 * Makefile.in (sysroff.h): Split target away from sysroff.c.
1902 (srconv.o, sysdump.o): New targets.
1903 (srconv, sysdump): Don't depend upon sysroff.c.
1905 Wed Sep 28 13:04:34 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1907 * Makefile.in (arparse.c): Don't ignore errors from mv.
1908 (sysinfo.c): Likewise. Also, depend upon arparse.c, to prevent a
1909 parallel make from trying to build both arparse.c and sysinfo.c
1911 (nlmheader.c): Similar change.
1912 (arparse.h): Separate target from arparse.c, so that a parallel
1913 make does not try to build both at once. Depend upon arparse.c.
1914 (sysinfo.h): Similar change.
1916 * objdump.c (disassemble_data): Pass the reloc buffer to free, not
1917 the pointer used to loop over the relocs.
1919 Sat Sep 24 16:16:57 1994 Stan Shebs (shebs@andros.cygnus.com)
1921 * objdump.c (disassemble_data): Cast result of xmalloc.
1923 Wed Sep 21 19:30:35 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1925 * objdump.c (sorted_syms, sorted_symcount): New global variables.
1926 (objdump_print_address): Use sorted_syms and sorted_symcount
1927 instead of syms and symcount.
1928 (disassemble_data): Don't bother to get the relocs before looping
1929 over the sections. Before filtering and sorting the symbol table,
1930 copy it into sorted_syms.
1932 Fri Sep 16 11:27:39 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1934 * objdump.c (struct objdump_disasm_info): Add field require_sec.
1935 (objdump_print_address): If aux->require_sec, require that the
1936 symbol be in aux->sec even if HAS_RELOC is not set. If we can't
1937 find a smaller symbol in the right section, look for a larger one.
1938 (disassemble_data): Set aux.require_sec around the
1939 objdump_print_address call for the instruction address.
1941 Thu Sep 15 21:43:17 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1943 * ar.c: Call xexit rather than exit.
1944 (output_filename, output_file, output_bfd): New static variables.
1945 (remove_output): New static function.
1946 (main): Call xatexit (remove_output). Call xexit rather than
1948 (extract_file): Set output_filename and output_file while output
1950 (write_archive): Likewise, but use output_bfd, not output_file.
1951 * arsup.c: Include libiberty.h. Call xexit rather than exit.
1952 * bucomm.c: Likewise.
1954 * objdump.c (disassemble_all): New global variable.
1955 (usage): Document --disassemble-all.
1956 (long_options): Add disassemble-all as a synonym for -D.
1957 (compare_symbols): Make pointers const.
1958 (compare_relocs): New static function.
1959 (disassemble_data): Rename disassemble to disassemble_fn to avoid
1960 shadowing. If dump_reloc_info, print relocs along with
1961 disassembly. Skip sections which are not SEC_CODE unless
1962 disassemble_all or only is set.
1963 (display_bfd): Don't call dump_relocs if disassemble is set.
1964 (main): Accept and handle -D.
1965 * binutils.texi: Document -D/--disassemble-all.
1966 * objdump.1: Likewise.
1968 Wed Sep 14 12:19:07 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1970 * objdump.c (disassemble_data): Initialize prevline to 0. Make
1971 prev_function non const. Copy functionname into an malloc buffer
1972 when setting prev_function, instead of assuming that the string
1975 * nm.c: Include libiberty.h.
1976 (sort_by_size): New static variable.
1977 (long_options): Add --size-sort.
1978 (usage): Mention --size-sort.
1979 (numeric_forward): Make static. Change from void * to PTR.
1980 (numeric_reverse): Likewise.
1981 (non_numeric_forward, non_numeric_reverse): Likewise.
1982 (sorters): Change declaration from void * to PTR.
1983 (size_forward, sort_symbol_by_size): New static functions.
1984 (display_rel_file): Handle sort_by_size.
1985 (filter_symbols): If sort_by_size, discard absolute and undefined
1987 * binutils.texi (nm): Document --size-sort.
1988 * nm.1: Document --size-sort.
1990 Tue Sep 13 21:06:06 1994 Jeff Law (law@snake.cs.utah.edu)
1992 * objcopy.c (copy_main): Initialize input_filename and
1993 output_filename to NULL.
1995 Tue Sep 13 14:17:24 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1997 * Makefile.in (version.o): Depend upon Makefile, so that version.o
1998 gets rebuilt when make variable VERSION is changed.
2000 * objdump.c (dump_section_header): Print the SEC_NEVER_LOAD flag.
2002 Wed Aug 24 12:40:09 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2004 * configure.in: Change i[34]86 to i[345]86.
2006 Tue Aug 23 11:00:40 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2008 * ar.c (ranlib_touch): Don't update the archive map if there isn't
2011 Mon Aug 22 16:02:18 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2013 * ar.c: Include libiberty.h.
2014 (inarch): Remove variable.
2015 (map_over_members): Make static. Add arch argument, and use it
2016 instead of inarch. Change all callers.
2017 (main): Treat --version as -v. Accept -t argument. Accept any
2018 number of archive arguments. Catch and use open_inarch return
2019 value, rather than using inarch.
2020 (open_inarch): Return newly opened BFD, rather than using inarch.
2021 (do_quick_append): Make archive_filename const.
2022 (write_archive): Add iarch argument, and use it instead of inarch.
2024 (delete_members, move_members, replace_members): Likewise.
2025 (ranlib_only): Don't exit on success. Catch and use open_inarch
2027 (ranlib_touch): New function.
2028 * arsup.h (map_over_members): Don't declare.
2029 (ar_end, ar_extract): Declare.
2030 (open_inarch): Change return value in declaration to bfd *.
2031 * arsup.c (map_over_list): Make static. Always pass two arguments
2032 to function. Add arch argument, and use it instead of inarch.
2034 (ar_directory_doer): Make static. Add ignored second argument.
2036 (ar_directory): Use open_inarch return value rather than inarch.
2037 (ar_addlib_doer): Make static.
2038 (ar_addlib): Use open_inarch return value rather than inarch.
2039 (ar_extract): Remove unused local variable abfd.
2041 Thu Aug 11 14:55:57 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2043 Add support for removing named sections to objcopy and strip.
2044 * objcopy.c (struct section_list): Define.
2045 (remove_sections): New static variable.
2046 (strip_options, copy_options): Add remove-section.
2047 (copy_usage, strip_usage): Mention -R and --remove-section.
2048 (setup_section): If section is in remove_sections list, ignore it.
2049 (copy_section): Likewise.
2050 (strip_main, copy_main): Handle -R.
2051 * binutils.texi, objcopy.1, strip.1: Document new options.
2053 Wed Aug 10 10:19:55 1994 Stan Shebs (shebs@andros.cygnus.com)
2055 * nlmconv.c (powerpc_mangle_relocs): Rename symvalue to sym_value,
2056 so as not to conflict with the symvalue typedef in bfd.h.
2058 Mon Aug 1 13:19:09 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2060 * nlmheader.y: Per current NetWare docs, accept a revision number
2061 of 0 and treat a revision number greater than 26 as 0.
2063 Mon Jul 25 12:58:36 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2065 * objdump.c (objdump_print_address): Correct handling of end of
2066 symbols when looking for next symbol with a different value.
2068 Fri Jul 22 16:48:34 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2070 * nm.c (numeric_forward): Treat undefined symbols as "less than"
2071 defined symbols with zero values. If numeric values are equal, or
2072 both symbols are undefined, sort alphabetically. Don't assume
2073 that the difference of two bfd_vma values will truncate to "int"
2074 and still have the same sign.
2075 (numeric_reverse): Call numeric_forward and negate the result.
2076 (print_symbol_info_bsd): For undefined symbols, print leading
2077 spaces equivalent to the width of a printed bfd_vma, rather than
2078 assuming that 8 will look right.
2080 Fri Jul 22 10:36:50 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2082 * coffgrok.c (doit): Zero all fields of new structure.
2083 * srconv.c (sysroff_swap_*_out): Remove redundant trailing arg.
2084 * sysinfo.y: Generate sysroff_swap_*_out without requiring extra
2087 Fri Jul 22 10:09:53 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
2089 * nlmheader.y: Make "stack" and "stacksize" synonyms in the lexer
2090 rather than the parser.
2092 Thu Jul 21 10:25:09 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2094 * config/mh-alphaosf, config/mh-apollo68v, config/mh-delta88:
2097 Sat Jul 16 22:34:39 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2099 * objdump.c (slurp_dynamic_symtab): Try to get the dynamic symbols
2100 even if the bfd is not marked DYNAMIC. ELF executables are not
2101 marked DYNAMIC, but do have dynamic symbols.
2103 Fri Jul 15 01:41:35 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2105 * coffgrok.c (do_where): Make data with no type 'int'.
2106 (do_define): Keep info on source file of a symbol.
2107 * coffgrok.h (coff_symbol): New field.
2108 * srconv.c (PROGRAM_VERSION): Now 1.3
2109 (wr_rl): Use external ref number for symbol.
2110 (wr_dus): Only keep one source file per debug unit.
2111 (wr_dln): Always emit line numbers for first source file,
2112 (wr_globals): Emit globals in the du of their owning source file.
2114 Mon Jul 11 15:59:03 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
2116 * nlmheader.y: Null terminate var_hdr->threadName.
2118 Fri Jul 8 17:33:22 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2120 * Makefile.in (syslex.o, sysinfo.o): Permit C source files to be
2121 in $(srcdir), as they will be for FSF releases.
2123 Wed Jul 6 01:13:14 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2125 * nlmconv.c (setup_sections): Preserve existing section flags when
2126 copying in flags from a new section.
2128 Tue Jul 5 15:56:01 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2130 * objcopy.c: Include libiberty.h.
2131 (copy_file): If output_target is NULL, set it to the target of the
2134 Wed Jun 29 17:17:14 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
2136 * nlmconv.c (link_inputs): Fixed memory allocation bug.
2138 Thu Jun 23 12:52:46 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2140 * configure.in: Change --with-targets to --enable-targets.
2142 Tue Jun 21 12:53:21 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2144 * Makefile.in (sysinfo): Does not depend upon $(ADDL_LIBS).
2146 * nlmconv.c (powerpc_build_stubs): Don't generate the PowerPC
2147 NetWare custom header; no longer needed.
2148 (powerpc_mangle_relocs): Convert relocs against the uninitialized
2149 data section into relocs against the data section.
2151 * configure.in: Set nlmconv_defs to -DNLMCONV_cputype for all the
2152 netware targets. Write it into Makefile as NLMCONV_DEFS.
2153 * Makefile.in (nlmconv.o): Pass $(NLMCONV_DEFS) to $(CC).
2154 * nlmconv.c: Only compile code for specific CPU types if
2155 NLMCONV_cputype is defined.
2157 * nlmconv.c (main): Change uses of bfd_abs_section, etc., to use
2158 bfd_abs_section_ptr or bfd_is_abs_section, etc.
2159 (i386_mangle_relocs, alpha_mangle_relocs): Likewise.
2160 (powerpc_build_stubs): Likewise.
2161 * nm.c (filter_symbols, print_symbols): Likewise.
2162 * objcopy.c (filter_symbols): Likewise.
2163 (mark_symbols_used_in_relocations): Likewise.
2164 * objdump.c (remove_useless_symbols, dump_relocs): Likewise.
2165 * size.c (sysv_internal_printer): Likewise.
2167 Mon Jun 20 16:43:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2169 * Makefile.in (MANPAGES): Remove $(DEMANGLER_PROG).
2170 (install): Install it explicitly, from build dir, not srcdir.
2172 Mon Jun 20 16:29:54 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2174 * objdump.c: Don't include elf/internal.h.
2175 (bfd_elf_find_section): Don't declare.
2176 (read_section_stabs): No special handling for ELF. Always read
2179 Thu Jun 16 17:25:20 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2181 * configure.in: Set UNDERSCORE in Makefile based on result of
2182 invoking config.bfd with a second argument of ``_''.
2183 * Makefile.in (underscore.c): Depend upon Makefile. Don't try to
2184 run $(CC) and $(NM), just use $(UNDERSCORE). Create via temporary
2186 (demangle.o): Remove target.
2187 ($(NM_PROG)): Don't depend upon demangle.o, and don't link against
2188 demangle.o. It's in libiberty anyhow.
2189 (cplus-dem.o): Don't depend upon demangle.o.
2190 * binutils.texi: Mention -n and --no-strip-underscores arguments
2193 Wed Jun 15 12:10:31 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2195 * nm.c (long_options): Add --no-demangle to turn off --demangle,
2196 and --no-cplus for Linux compatibility.
2197 (usage): Mention --no-demangle.
2198 * binutils.texi: Document --no-demangle.
2200 Fri Jun 10 15:41:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2202 * nm.c: HOST_64_BIT was renamed to BFD_HOST_64_BIT.
2204 * objcopy.c (copy_archive): Make the temporary directory in the
2205 same directory as the output BFD, since we may not have write
2206 permission on the current directory. Set the permissions of the
2207 new directory to 0700, not 0777.
2209 Mon Jun 6 21:36:43 1994 D. V. Henkel-Wallace (gumby@cygnus.com)
2211 * configure.in: if this is an rs6000 (and we're not building for
2212 any other bfd targets) then build only nm (collect needs it on
2215 * Makefile.in: define TOOL_PROGS which the list of programes to
2216 install in $tooldir -- replaces a hard-coded list.
2218 Fri Jun 3 10:59:18 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2220 * objdump.c (display_target_list): Remove unused local ok.
2222 Thu May 26 18:05:52 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2224 * config/mh-alphaosf (CFLAGS): Don't specify both -g and -O;
2225 they're not compatible under native cc. Use -O1 instead.
2227 * Makefile.in (VERSION): Updated to cygnus-2.4.1.
2229 Changes from binutils-2.4 net release:
2231 * Makefile.in (MANPAGES): Use $(DEMANGLER_PROG).
2232 ($(DEMANGLER_PROG).1): Build from cxxfilt.man, using sed.
2233 * cxxfilt.man: Renamed from c++filt.1, replaced "c++filt" with
2234 magic token to be replaced by sed.
2236 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2238 * configure.bat: update for latest makefile.in
2240 Fri May 13 23:25:13 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2242 * bucomm.c: Check ANSI_PROTOTYPES rather than __STDC__.
2244 Tue May 10 18:22:06 1994 Jason Molenda (crash@sendai.cygnus.com)
2246 * objcopy.c (copy_section): Set section size correctly if using
2249 Sat May 7 16:49:36 1994 Steve Chamberlain (sac@cygnus.com)
2251 * Makefile.in: Add rule for sysinfo.h
2253 Fri May 6 12:18:33 1994 Steve Chamberlain (sac@cygnus.com)
2255 * Makefile.in (SRCONV_PROG): Define.
2256 (PROGS): Use $(SRCONV_PROG) too.
2258 Thu May 5 19:41:43 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2260 * Makefile.in (DISTSTUFF): Add sysinfo.c, syslex.c, in case
2261 someone configures with `targets=all'.
2262 (distclean): Remove y.*.
2263 (syslex.o): Depend on sysinfo.h.
2264 (sysinfo.c): Rename y.tab.h to sysinfo.h.
2265 (install-info): Don't try to install into $(infodir)/$(srcdir).
2266 * syslex.l: Include sysinfo.h, not y.tab.h.
2268 Thu May 5 11:50:55 1994 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2270 * syslex.l (yywrap): Define as function if not defined as a macro.
2272 * Makefile.in (objdump.o): Deleted special rule.
2273 * configure.in: Don't bother building ARCHDEFS variable for
2275 * objdump.c (ARCH_*): Deleted handling.
2276 (disassemble_data): Call `disassembler' from opcodes library.
2278 Thu May 5 13:28:42 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2280 * Makefile.in (install): Correct handling of $(tooldir) and
2281 $(bindir) being on different devices.
2283 Fri Apr 29 09:50:38 1994 Steve Chamberlain (sac@cygnus.com)
2285 * sysdump.c (h8300, sh): Add declarations.
2287 Wed Apr 27 11:25:18 1994 Steve Chamberlain (sac@cygnus.com)
2289 * Makefile.in (syslex, sysinfo): Use CC_FOR_BUILD.
2290 * coffdump.c, coffgroc.c, coffgrog.h, srconv.c, sysdump.c,
2291 sysroff.info: Major changes.
2293 Tue Apr 26 18:18:24 1994 Stan Shebs (shebs@andros.cygnus.com)
2295 * objdump.c (print_section_stabs): Indicate the stab header symbol
2296 more clearly, print numbers of unrecognized stab n_type values.
2298 Tue Apr 26 16:22:55 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2300 * nlmconv.c (copy_sections): Copy arelent pointers, not arelents.
2302 Mon Apr 25 16:14:32 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2304 * Makefile.in (distclean): Remove $(PROGS) and underscore.c.
2306 Fri Apr 22 11:14:19 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2308 * nlmconv.c (setup_sections): Remove special handling of .reginfo
2310 (copy_sections): Likewise.
2311 (alpha_mangle_relocs): Use bfd_ecoff_get_gp_value rather than the
2312 special ECOFF .reginfo section.
2314 * objcopy.c (copy_object): Call bfd_copy_private_bfd_data after
2315 copying everything else, to let it fiddle with the file in its
2318 * objdump.c: Include libiberty.h.
2319 (display_target_list): If a format fails, just go on to the next
2320 one. Check return value of bfd_set_format.
2321 (display_info_table): Likewise. Don't increment loop variable in
2322 for loop test, since that skips the first element.
2323 (display_target_tables): Rewrite loop for clarity. Ensure that it
2324 always prints at least one element.
2326 * nlmconv.c (main): Use CyGnUsEx rather than CyGnUsSeCs for
2327 sections header. Rename from cygnus_sections to cygnus_ext.
2329 Thu Apr 21 12:12:26 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2331 * objdump.c (_DUMMY_NAME_): Don't define.
2332 (display_target_list): Use tmpnam to get a file name rather than
2333 using _DUMMY_NAME_. Unlink it when done.
2334 (display_info_table): Likewise.
2336 * nlmconv.c (secsec): New static variable.
2337 (main): Create .nlmsections section in output BFD. Store
2338 information about it in sections header.
2339 (setup_sections): Allocate space in sections header.
2340 (copy_sections): Copy zero sized sections. Put information about
2341 each section in the sections header.
2343 Wed Apr 20 14:34:51 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2345 * nlmconv.c (powerpc_build_stubs): Take new outbfd argument.
2346 Change caller. Create custom header for new PowerPC NetWare
2349 * Makefile.in (nlmheader.o, nlmconv.o): Update dependencies.
2350 * nlmconv.c: Include bfd.h and libiberty.h with "", not <>.
2351 * nlmheader.y: Include bfd.h with "", not <>.
2353 Wed Apr 13 10:52:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2355 * objdump.c: Do an ifdef on __GO32__, not unix.
2357 Wed Apr 6 21:54:49 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2359 Added -D (--dynamic) option to nm and -T (--dynamic-syms) and -R
2360 (--dynamic-reloc) arguments to objdump.
2361 * nm.c (dynamic): New static variable.
2362 (long_options): Added "dynamic".
2363 (usage): Mention -D and --dynamic.
2364 (main): Add D to getopt string. Handle -D by setting dynamic.
2365 (display_rel_file): If dynamic is non-zero, read dynamic symbols
2366 rather than normal symbols.
2367 * nm.1: Updated for -D (--dynamic) option.
2368 * objdump.c (dump_dynamic_symtab): New global variable.
2369 (dump_dynamic_reloc_info): New global variable.
2370 (dynsyms, dynsymcount): New global variables.
2371 (usage): Mention -R, -T, --dynamic-syms and --dynamic-reloc.
2372 (long_options): Added "dynamic-reloc" and "dynamic-syms".
2373 (slurp_symtab): If no symbols, return rather than exit.
2374 (slurp_dynamic_symtab): New function.
2375 (display_bfd): Handle dump_dynamic_symtab and
2376 dump_dynamic_reloc_info.
2377 (dump_symbols): Take new dynamic argument, indicating whether to
2378 display dynamic symbols.
2379 (dump_relocs): Move most printing into dump_reloc_set.
2380 (dump_dynamic_relocs): New function.
2381 (dump_reloc_set): New function, extracted from dump_relocs.
2382 (main): Add R and T to getopt string. Handle -T by setting
2383 dump_dynamic_symtab and -R by setting dump_dynamic_reloc_info.
2384 * objdump.1: Updated for -R (--dynamic-reloc) and -T
2385 (--dynamic-syms) options.
2386 * binutils.texi: Updated for new nm and objdump options.
2388 Wed Mar 30 15:52:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2390 Update for recent BFD changes to symbol and reloc reading. Rename
2391 all uses of get_symtab_upper_bound to bfd_get_symtab_upper_bound.
2393 * coffgrok.c (symcount): Change to long.
2394 (do_sections_p1): Check for error return from
2395 bfd_get_reloc_upper_bound. Change relcount to long, and check for
2396 error from bfd_canonicalize_reloc.
2397 (coff_grok): Change storage to long. Check for error from
2398 bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
2399 * nlmconv.c (main): Change symcount, newsymalloc, newsymcount, and
2400 i to long. Check for error from bfd_get_symtab_upper_bound and
2401 bfd_canonicalize_symtab.
2402 (copy_sections): Change reloc_size and reloc_count to long. Check
2403 for error from bfd_get_reloc_upper_bound and
2404 bfd_canonicalize_reloc.
2405 (mangle_relocs, i386_mangle_relocs, alpha_mangle_relocs): Change
2406 reloc_count_ptr argument to long *. Make corresponding changes to
2407 variables loaded from *reloc_count_ptr.
2408 * nm.c (display_rel_file): Change storage and symcount to long.
2409 Check for errors from bfd_get_symtab_upper_bound and
2410 bfd_canonicalize_symtab.
2411 * objcopy.c (filter_symbols): Change symcount, src_count and
2413 (copy_object): Change symcount to long. Pass another argument to
2414 fprintf. Check for errors from bfd_get_symtab_upper_bound and
2415 bfd_canonicalize_symtab.
2416 (copy_section): Change relcount to long. Check for errors from
2417 bfd_get_reloc_upper_bound and bfd_canonicalize_reloc.
2418 (mark_symbols_used_in_relocations): Change relcount and i to long.
2419 Check for errors form bfd_get_reloc_upper_bound and
2420 bfd_canonicalize_reloc.
2421 * objdump.c (storage): Remove global variable.
2422 (symcount): Changed to long.
2423 (slurp_symtab): New local variable storage. Check for errors from
2424 bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
2425 (remove_useless_symbols): Change return value and count to long.
2426 (objdump_print_address): Change min, max, thisplace and i to long.
2427 (disassemble_data): Change i to long.
2428 (dump_symbols): Change count to long.
2429 (dump_relocs): Change relcount to long. Check for errors from
2430 bfd_ret_reloc_upper_bound and bfd_canonicalize_reloc.
2431 (display_info_table): Add casts when passing LONGEST_ARCH for
2434 Tue Mar 29 14:59:04 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2436 * nm.c (display_archive): Close each archive element after it has
2438 * objdump.c (display_file): Likewise.
2440 Mon Mar 28 13:04:08 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2442 * configure.in: Change error message to refer to bfd/config.bfd
2443 rather than bfd/configure.in.
2445 Sun Mar 27 16:23:39 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2447 * More fixes for object formats which allow multiple sections
2449 * objcopy.c (setup_section): Make a new output section even if
2450 one already exists with the given name.
2451 (copy_section): Use isection->output_section rather than trying
2452 to look the output section up by its (possibly non-unique) name.
2454 * Makefile.in (install-info): Look for binutils.info in the
2455 current directory, then in $(srcdir). Don't use $<.
2457 Mon Mar 21 12:55:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2459 * objdump.c (objdump_print_address): Make static. Declare with
2460 prototype. Change vardiff from int to bfd_signed_vma. Correct
2461 binary search termination condition. When looking for same
2462 section symbol in relocatable file, handle final symbol correctly.
2464 Sun Mar 20 11:26:36 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2466 * Makefile.in: Avoid bug in hpux sed.
2468 * objcopy.c: Changes to keep it from stripping symbols used
2469 in output relocations.
2470 (mark_symbols_used_in_relocations): New function. Mark symbols
2471 used in output relocations with BSF_KEEP.
2472 (filter_symbols): Do not strip symbols marked with BSF_KEEP.
2473 (copy_object): Reorder actions. First setup sections, then
2474 build the output symbol table, then copy the section contents.
2476 Fri Mar 18 10:53:55 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2478 * ar.c (write_archive): Allocate space for the null byte. From
2479 Robert Lipe <robertl@arnet.com>.
2481 Thu Mar 17 16:20:28 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2483 * Makefile.in: Built nm.new and strip.new to avoid problems with
2484 collect when . is in PATH.
2485 (STRIP_PROG): Change from strip to strip.new.
2486 (NM_PROG): Change from nm to nm.new.
2487 (install): Remove the .new when installing.
2489 Wed Mar 16 16:27:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2491 * nlmconv.c (powerpc_build_stubs): Set BSF_DYNAMIC flag for each
2492 symbol for which we build a stub.
2493 (powerpc_mangle_relocs): Only reset TOC pointer for a call to a
2494 symbol with BSF_DYNAMIC flag set.
2496 Tue Mar 15 23:04:13 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2498 * objcopy.c (filter_symbols): Use bfd_is_local_label to determine
2499 if a symbol represents a compiler-generated local label.
2500 (copy_object): Give the BFD backends a chance to copy any private
2501 bfd data from the input BFD to the output BFD.
2502 (setup_section): Give the BFD backends a chance to copy any private
2503 section data from the input section to the output section.
2505 Mon Mar 14 11:15:58 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2507 * objcopy.c (mangle_section): Delete unused function.
2508 (setup_section): Set osection here instead of calling
2509 mangle section to do it.
2511 Mon Mar 14 12:11:01 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2513 * ar.c (write_archive): Close inarch before unlinking it.
2515 Fri Mar 11 22:20:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2517 * nlmconv.c (main): For PowerPC, call powerpc_build_stubs and
2518 powerpc_resolve_stubs. Use __GOT0, not __toc_start. Handle it if
2519 the start and end symbols are not in the text section.
2520 (struct powerpc_stub): New struct definition.
2521 (powerpc_stubs, powerpc_stub_insns): New static variables.
2522 (powerpc_initial_got_size): New static variable.
2523 (powerpc_build_stubs): New function.
2524 (powerpc_resolve_stubs): New function.
2525 (powerpc_mangle_relocs): Clear extraneous data in .got section.
2526 Rearrange reloc handling to handle ELF relocs that are not
2527 partial_inplace. Resolve PC relative relocs.
2529 Wed Mar 9 13:48:11 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2531 * ar.c (move_members): Fix it so that the abi positional modifiers
2532 don't delete all archive members following the insert point.
2534 Tue Mar 8 13:14:43 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2536 * coffgrok.[ch]: New files, understand coff objects.
2537 * coffdump.c: Uses coffgrok to dump out the debug info of a coff
2539 * sysroff.info: Description of a SYSROFF object file.
2540 * sysinfo.y, syslex.l: Parse info file, generate a reader, writer,
2541 header files and a printer.
2542 * srconv.c: Uses coffgrok.c and sysroff.info to convert a coff
2543 file to a SYSROFF file.
2545 Sat Feb 26 13:35:26 1994 Stan Shebs (shebs@andros.cygnus.com)
2547 * ar.c (do_quick_append): Pad with a genuine character 10,
2548 rather than whatever '\n' might happen to be.
2550 Tue Feb 22 18:25:52 1994 Ian Lance Taylor (ian@cygnus.com)
2552 * nlmconv.c (main): Ignore debugging symbols when looking for
2553 special symbols by name.
2555 Sun Feb 20 18:47:42 1994 Ian Lance Taylor (ian@lisa.cygnus.com)
2557 * nlmconv.c: Include libiberty.h.
2559 Support for PowerPC NetWare.
2560 * nlmconv.c (main): For PowerPC NetWare, automatically define the
2561 special symbols __toc_start.
2562 (select_output_format): Handle bfd_arch_powerpc.
2563 (mangle_relocs): Likewise.
2564 (powerpc_mangle_relocs): New function.
2566 Thu Feb 17 09:28:23 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2568 * ar.c, bucomm.c, nlmconv.c, nm.c, objcopy.c, objdump.c,
2569 size.c: Use bfd_get_error and bfd_set_error and new error names.
2571 Fri Feb 11 15:54:51 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2573 * objcopy.c (strip_main, copy_main): Add missing 'break' in switch.
2575 Mon Feb 7 19:45:52 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2577 * objdump.c (disassemble_data): Handle bfd_arch_powerpc.
2579 Sun Feb 6 22:08:20 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2581 * strings.c objdump.c nlmconv.c objcopy.c nm.c ar.c size.c (main):
2582 Call xmalloc_set_program_name.
2584 Fri Feb 4 10:46:01 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2586 * objcopy.c (filter_bytes): Make MEMHUNK a char *, not PTR, so we
2587 can do arithmetic on it.
2589 Thu Feb 3 14:06:41 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2591 * objdump.c (dump_section_stabs, read_section_stabs,
2592 print_section_stabs): Functions broken out of dump_stabs_1.
2593 Free the stabs and strings when done with them.
2595 Wed Feb 2 13:42:23 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2597 * nlmconv.c (main): Use bfd_get_flavour instead of struct member.
2598 * ar.c (print_contents, extract_file), size.c
2599 (print_berkeley_format, print_sysv_format): Use bfd_get_filename and
2600 bfd_my_archive instead of dereferencing the structs directly.
2602 * ar.c: Use bfd_fatal and bfd_nonfatal instead of bfd_perror and exit.
2603 Indent. Remove DEFUNs.
2605 * nlmconv.c (main), objcopy.c (copy_file): Print matching formats
2607 * nm.c (display_file, display_archive), size.c (display_bfd):
2609 Print matching formats if there is an ambiguous match. Use
2610 bfd_nonfatal instead of hardcoded error message if nothing matches.
2612 * arsup.c, ar.c, objdump.c: Use bfd_get_filename instead of
2615 * nm.c (display_archive): New function, from code in display_file.
2616 (display_rel_file): Renamed from do_one_rel_file.
2619 (display_archive): New function from code in display_file.
2620 (display_file): Check bfd_close error return.
2622 * strings.c (strings_object_file): Check bfd_check_format
2625 * strings.c, objdump.c, size.c: Use bfd_nonfatal instead of bfd_perror.
2627 * bucomm.c: Delete references to exit_handler. It wasn't set
2628 anywhere, and now that we're using the libiberty xmalloc, it
2629 wouldn't always get called before exiting.
2630 (list_matching_formats): Function moved from objdump.c.
2631 * bucomm.h: Declare it.
2633 * objdump.c (disassemble_data): Move some variable decls closer to
2634 their use. Add some comments. Replace a nested block with a
2637 Mon Jan 31 18:50:41 1994 Stan Shebs (shebs@andros.cygnus.com)
2639 * objdump.c (display_target_list, display_info_table): Check that
2640 the bfd of the dummy output file is not null.
2642 Wed Jan 26 13:13:18 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2644 * objcopy.c (filter_bytes): New function.
2645 (copy_section): Call it.
2646 (copy_options, copy_usage, copy_main): Add --byte option to
2647 activate it. Appropriate the -b option (which was an undocumented
2648 synonym for -F) for it, also. Add --interleave, -i option for
2650 (setup_section, copy_section, mangle_section): Renamed with no `s'
2652 * objcopy.1, binutils.texi: Document the new options.
2654 * objdump.c (display_target_tables, display_target_list):
2655 New functions broken out of display_info.
2656 Eliminate some magic constants. Use more meaningful variable names.
2657 (dump_bfd_header): New function broken out of display_bfd.
2658 (dump_section_header): New function broken out of dump_headers.
2659 (remove_useless_symbols): Don't shadow global variable name with
2661 (objdump_print_address): Fix backward test.
2663 Tue Jan 25 19:40:54 1994 Stan Shebs (shebs@andros.cygnus.com)
2665 * bucomm.c (print_arelt_descr): Change decl of `when' to time_t.
2666 * objdump.h: Removed.
2668 Mon Jan 24 13:29:02 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2670 * objdump.c (display_file): Remove call to list_matching_formats.
2671 It would never be called.
2672 (list_matching_formats): Take an arg giving the list of matching
2674 (display_bfd): Pass the arg, and get it filled in by calling
2675 bfd_check_format_matches instead of bfd_check_format.
2676 (display_info, display_info_table): target_vector was renamed to
2679 * binutils.texi (objdump): Note some limitations of -h section
2682 Sat Jan 22 16:20:46 1994 Stan Shebs (shebs@andros.cygnus.com)
2684 * Makefile.in (MALLOC): Set to emptiness by default.
2685 (ALL_CFLAGS): Add and use.
2686 (arparse.h): Make it depend on arparse.y.
2687 * ar.c (libbfd.h): Don't require to be in ../bfd.
2688 * objdump.c (comp): Rename to compare_symbols.
2690 Fri Jan 21 20:22:30 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2692 * objdump.c (list_matching_formats): If the file format is ambiguous,
2693 print the matching names so the user can choose one.
2694 (display_bfd): Call it.
2695 (display_file): Call it.
2697 Fri Jan 21 19:17:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2699 * objdump.c (disassemble_data): Support bfd_arch_rs6000.
2701 Mon Jan 17 13:57:25 1994 Stan Shebs (shebs@andros.cygnus.com)
2703 * objdump.c (stab_name): Allocate dynamically.
2704 (stab_print): Use pointers to strings instead of char arrays.
2705 (dump_stabs): Change alloc and init of arrays appropriately.
2706 (dump_stabs_1): Always decide whether to print stab_name or
2707 the stab's type number, if unnamed.
2709 Fri Jan 14 14:42:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2711 * objcopy.c (strip_main, copy_main): Don't clobber the input file
2714 * nlmconv.c (main): Warn about an attempt to use a shared library
2715 with uninitialized data.
2717 * nlmconv.c (setup_sections): Make sure that we align the
2718 output_offset of each input section appropriately.
2720 Thu Jan 13 17:32:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2722 * objdump.c (dump_relocs): Don't crash if section name is NULL.
2724 Tue Jan 11 19:46:33 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2726 * filemode.c (filemodestring): Commented out; not used.
2727 (mode_string): Use POSIX definitions.
2728 (ftypelet): Likewise.
2729 (rwx): Removed; no longer used.
2730 * bucomm.c: Include bucomm.h.
2731 (bfd_nonfatal, bfd_fatal): Argument is const.
2732 (fatal): Make __STDC__ version.
2733 * bucomm.h (mode_string): Declare.
2734 * Makefile.in (bucomm.o): Depend upon bucomm.h
2736 Sun Jan 9 12:03:20 1994 Ken Raeburn (raeburn@rtl.cygnus.com)
2738 * bucomm.c (xmalloc, xrealloc): Deleted.
2739 * bucomm.h (xmalloc, xrealloc): Fix prototypes, to correspond to
2740 libiberty version of functions.
2742 Thu Jan 6 06:18:15 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2744 * binutils.texi: Add a chapter summarizing the ways to select
2745 aspects of the target for each program.
2747 * objdump.c (long_options, usage): Add long equivalents for all
2748 remaining short options that lacked them.
2749 * binutils.texi objdump.1: Document them.
2751 * size.c (usage): Tweak usage message.
2752 * size.1: Add missing `=' in examples.
2754 * binutils.texi strip.1 objcopy.1 nlmconv.1 objcopy.c nlmconv.c:
2755 Use "--target=bfdname" as the option to select the BFD target,
2756 like nm and size already do.
2757 Reserve "--format=format" for textual output selection options, but
2758 for now keep old option names as obsolete for backward compatibility.
2760 * strings.c (main, strings_object_file, usage): Add --target option.
2761 * binutils.texi strings.1: Document it.
2763 Sat Jan 1 13:58:24 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2765 * ar.c (main): Add \n in error message.
2767 Thu Dec 23 12:23:11 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2770 * ar.c (main): Put parens around assignment used as truth value.
2771 * objcopy.c (strip_main): Remove unused variables. Return 0.
2772 (copy_main): Remove unused variables. Return 0.
2773 * objdump.c (display_bfd): Declare return value as void.
2774 (stab_print): Use "" instead of 0 to initialize array.
2775 (dump_stabs_1): Print vma using printf_vma.
2776 (display_info): Put parens around assignment used as truth value.
2777 * strings.c (print_strings): Cast printf arguments.
2779 * objcopy.c (copy_main): Use copy_options, not strip_options.
2781 * nlmheader.y (command): Warn about illegal date values.
2783 Wed Dec 15 11:18:03 1993 David J. MacKenzie (djm@frosty.eng.umd.edu)
2785 * bucomm.c bucomm.h: Run through indent. De-ansidecl-ify.
2786 (bfd_nonfatal): New function.
2787 (bfd_fatal): Call it.
2789 * objcopy.c (smart_rename): Do a copy if the dest file has
2790 multiple hard links. Remove source file on successful copy.
2791 Try to preserve mode and owner on successful rename.
2793 * objcopy.c: Run through indent. Clean up a bit.
2794 Make global variables static.
2795 Make {input,output}_{target,filename}, show_version local
2796 to various functions.
2797 New global variable `status' for exit status.
2798 (strip_main, copy_main): New functions with code from main.
2799 (nonfatal): New macro. Use it globally instead of bfd_perror and
2802 (copy_object): Call mangle_sections with bfd_map_over_sections.
2803 (mangle_sections): Adjust for new calling convention.
2805 Fri Dec 10 11:28:11 1993 Ian Lance Taylor (ian@deneb.cygnus.com)
2807 * nlmheader.y (command): Accept MAP and FULLMAP without arguments.
2808 * nlmconv.c (main): Change error message for MAP and FULLMAP.
2810 Thu Dec 9 17:47:19 1993 Ian Lance Taylor (ian@deneb.cygnus.com)
2812 * nlmconv.c (main): Warn about imported symbols that are not in
2813 the IMPORT list even if the IMPORT keyword is not used.
2815 * nlmconv.c (debug, unlink_on_exit): New static variables.
2816 (long_options): Add "debug" and "linker".
2817 (main): Handle -d and -l arguments. Make command line input and
2818 output files optional. Parse the command file before opening the
2819 BFD's, which requires storing more information in local variables.
2820 If INPUT names multiple files, link them together. Use OUTPUT for
2821 the output file name if not named on command line.
2822 (show_usage): Changed for new options.
2823 (link_inputs): New function to automatically invoke linker to
2824 handle multiple INPUT files.
2825 (choose_temp_base_try, choose_temp_base, pexecute): New functions,
2826 mostly copied from gcc/gcc.c.
2827 * nlmconv.h (input_files, output_file): Declare.
2828 * nlmheader.y (input_files, output_file): Define.
2829 (command): Support INPUT with a string_list argument. Support
2831 (string_list): Renamed from module_list.
2832 * Makefile.in (nlmconv.o): Define LD_NAME based on
2833 program_transform_name.
2835 Wed Dec 8 10:09:04 1993 Ian Lance Taylor (ian@deneb.cygnus.com)
2837 * nlmheader.y (nlmheader_identify): New function. Use it to print
2838 the program name just once, instead of with every error message.
2840 Mon Dec 6 16:11:32 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2842 * nlmconv.c (long_options): Changed --header-info to --header-file
2843 to match documentation and usage message.
2845 Sun Dec 5 01:31:01 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
2847 * objdump.c (dump_relocs): Avoid dereferencing a NULL sym_ptr_ptr
2850 Thu Dec 2 16:00:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2852 * nlmconv.c (main): Change various types from bfd_size_type to
2853 size_t, since they have to be arguments to fread and fwrite.
2854 Change set from char * to unsigned char *.
2855 (select_output_format): Make mach argument unsigned. Handle
2857 (setup_sections): Don't copy the .reginfo section of an ECOFF
2858 file. Call bfd_set_reloc to initialize the relocation fields.
2859 (copy_sections): Don't copy the .reginfo section of an ECOFF file.
2860 Combine all relocs for a section.
2861 (mangle_relocs): Change type of relocs to permit specific
2862 functions to change it. Call alpha_mangle_relocs for alpha,
2863 default_mangle_relocs for other architectures.
2864 (default_mangle_relocs): New function. Adjust the address of all
2865 relocs by the output_offset.
2866 (i386_mangle_relocs): Change type of relocs argument. Cast length
2867 argument to memmove to size_t.
2868 (alpha_mangle_relocs): New function.
2870 Wed Nov 17 17:38:58 1993 Sean Eric Fagan (sef@cygnus.com)
2872 * nlmconv.c (select_output_format): Use nlm32-sparc for
2875 Wed Nov 17 14:41:35 1993 Jeffrey Osier (jeffrey@thepub.cygnus.com)
2877 * nlmconv.1: added man page
2878 * objcopy.1: fixed format errors
2880 Wed Nov 17 12:03:41 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2882 * Makefile.in: Use CFLAGS as well as LDFLAGS when linking.
2884 Wed Nov 17 04:50:55 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2886 * strings.1: Fix typo.
2888 Mon Nov 15 12:03:20 1993 Ken Raeburn (raeburn@rtl.cygnus.com)
2890 * Makefile.in (DISTSTUFF): Build "info".
2891 (VERSION): Updated to cygnus-2.3.1; 2.3 has gone out.
2893 Sun Nov 14 00:27:24 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
2895 * objdump.c (dump_stabs): Handle stabs-in-som as implemented
2896 by the new BFD SOM assembler.
2898 Sat Nov 13 07:14:05 1993 David J. Mackenzie (djm@rtl.cygnus.com)
2900 * ar.1 c++filt.1 nm.1 objcopy.1 objdump.1 ranlib.1 size.1
2901 strings.1 strip.1: Replace \(em in NAME section with \- so
2902 makewhatis can grok it.
2904 Tue Nov 9 15:22:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2906 * nlmconv.c (i386_mangle_relocs): Adjust reloc address by
2907 section output_offset.
2909 Fri Nov 5 12:11:52 1993 Jeffrey Osier (jeffrey@thepub.cygnus.com)
2911 * binutils.texi: added nlmconv chapter
2913 Wed Nov 3 16:10:50 1993 Jeffrey Wheat (cassidy@cygnus.com)
2915 * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS
2917 Wed Nov 3 15:09:23 1993 Ken Raeburn (raeburn@rover.cygnus.com)
2919 * Makefile.in (distclean): Don't get rid of dvi or info files.
2921 Tue Nov 2 13:29:59 1993 David J. Mackenzie (djm@rtl.cygnus.com)
2923 * objcopy.c (S_ISLNK): Define as 0 if there's no S_IFLNK.
2925 Fri Oct 29 16:02:34 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2927 * binutils.texi: Move objcopy docs into alphabetical order.
2929 * objdump.c: Use xmalloc instead of malloc.
2931 Fri Oct 29 11:11:14 1993 Stan Shebs (shebs@rtl.cygnus.com)
2933 * objdump.c (info): Rename to formats_info.
2934 (dump_stabs_1): Better comments and formatting.
2936 Thu Oct 28 19:43:16 1993 Stan Shebs (shebs@rtl.cygnus.com)
2938 * ar.c (main): Always create the archive when quick appending,
2939 even if no input files have been given.
2941 Wed Oct 27 12:03:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2943 * nlmconv.c (main): Set sharedDebugRecordOffset and
2944 sharedDebugRecordCount fields in extended header.
2946 * nlmconv.c (main): Force moduleName field to upper case.
2948 Mon Oct 25 16:45:42 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2950 * objcopy.c (main): Give a usage message if there are too many
2953 Mon Oct 25 10:37:08 1993 Ken Raeburn (raeburn@rover.cygnus.com)
2955 * Makefile.in (install-info): Rewrite to take advantage of VPATH,
2956 so FSF distributions (with info files in $(srcdir)) install
2958 (DISTSTUFF): Build nlmheader.c too.
2960 Fri Oct 22 11:43:23 1993 Ken Raeburn (raeburn@rover.cygnus.com)
2962 * ar.c (program_name): Don't define here.
2963 * objdump.c: Include "bucomm.h".
2964 (xmalloc): Don't declare here.
2965 (program_name): Don't define here.
2966 (program_version): Fixed type in declaration.
2967 * size.c: Include "bucomm.h".
2968 (program_name): Don't declare here.
2970 Fri Oct 22 14:10:41 1993 Mark Eichin (eichin@cygnus.com)
2972 * objdump.c (fprintf): hide declaration in FPRINTF_ALREADY_DECLARED
2974 Fri Oct 1 12:43:00 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2976 * nlmconv.c (i386_mangle_relocs): Resolve and remove PC relative
2977 relocs against defined symbols in the same section.
2979 Thu Sep 30 16:46:26 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
2981 * Makefile.in (binutils.dvi): use TEXIDIR to find texinfo.tex
2983 Sat Sep 25 18:09:29 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2985 * objcopy.c (simple_copy, smart_rename): New functions.
2988 Fri Sep 24 15:38:29 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2990 * Makefile.in (clean, distclean): Recurse into testsuite.
2992 Thu Sep 23 01:05:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2994 * objcopy.c (setup_sections, copy_sections): If stripping, don't
2995 copy SEC_DEBUGGING sections.
2996 * objdump.c (dump_headers): Print SEC_DEBUGGING flag.
2998 * objdump.c (usage): Mention --stabs.
3000 * objcopy.c (copy_object): Copy all applicable file flags.
3001 (copy_file): Don't copy EXEC_P specially here.
3003 Mon Sep 20 19:28:57 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3005 * nlmconv.c (main): Adjust data section size to correspond to bss
3006 alignment adjustment. Clear BSF_SECTION_SYM if symbol is moved to
3007 a different section. Use time_t for time variable.
3008 (setup_sections): Only put sections with contents in output NLM.
3009 (i386_mangle_relocs): No symbols are common at this point. Add
3010 casts to avoid warnings.
3012 Fri Sep 10 11:00:40 1993 Stan Shebs (shebs@rtl.cygnus.com)
3014 * objdump.c: Made the --stabs option work for stabs-in-coff.
3015 (ELF_STAB_DISPLAY): Removed.
3016 (dump_elf_stabs): Renamed to dump_stabs, changed to run for
3017 any object file format.
3018 (dump_elf_stabs_1): Renamed to dump_stabs_1, added calls to
3019 generic BFD routines for non-ELF case, changed format of message
3020 for no-section-found case.
3021 (display_bfd): Always call dump_stabs if requested.
3022 (dump_data): Call bfd_section_size to get section size.
3024 Fri Sep 10 08:12:23 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3026 * Makefile.in (install): Don't put strings in tooldir/bin.
3028 Mon Sep 6 15:39:04 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3030 * nlmconv.c (total_bss_size): Removed.
3031 (main): Set the bss vma to always follow the data section. Move
3032 symbols into new sections, and adjust values by output_offset.
3033 (setup_sections): Don't copy all sections, but instead point all
3034 text sections to .text, all data sections to .data, and all bss
3036 (copy_sections): Adjust accordingly.
3038 Thu Sep 2 12:34:03 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3040 Only build nlmconv if configured for a NetWare target.
3041 * configure.in: If we have some *-*-netware* target, or are using
3042 all targets, set BUILD_NLMCONV to $(NLMCONV_PROG) in Makefile.
3043 * Makefile.in (PROGS): Use $(BUILD_NLMCONV) rather than
3046 Tue Aug 31 14:13:35 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3048 * objdump.c (ARCH_all): Define ARCH_hppa too.
3049 (dump_headers): Don't test for SEC_BALIGN if it's not defined by
3052 Tue Aug 31 13:29:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3054 * nlmconv.c (main): Force creation of .bss section. Set up the
3055 sections before looking at the symbols. Move all common symbols
3056 into .bss section. Automatically define _edata and _end. Only
3057 export symbols in the export list, with multiple prefixes if
3058 necessary. Warn if no version. Always create extended header.
3059 Set date automatically if not already set.
3060 (setup_sections): Count size of bss sections.
3061 (mangle_relocs, i386_mangle_relocs): Accept section argument, and
3062 take reloc_count as a changeable pointer; changed callers.
3063 (i386_mangle_relocs): Remove PC relative relocs within a section,
3064 as they require no adjustment.
3065 * nlmheader.y: Fixed memory allocation throughout: token STRING is
3066 now allocated on the heap, and freed if not needed. Null
3067 terminated copyright message. Accept version with only two
3069 (symbol_list_opt): New nonterminal, either symbol_list or empty.
3070 (symbol_list): Use left recursion to avoid overflowing parser
3072 (yylex): Rearranged beginning of line check. Accept quoted
3073 strings using single quotes. End generic argument at comment
3074 character or parentheses.
3075 (string_list_append): Fixed.
3076 (string_list_append1): New function.
3078 * bucomm.h: The first argument to xrealloc is PTR, not char *.
3079 * bucomm.c (xrealloc): Use PTR rather than char *.
3080 * Makefile.in (objdump.o): Depend upon config.status to notice
3081 --with-targets changes.
3082 (nlmconv.o): Depend upon bucomm.h.
3084 Tue Aug 17 09:46:01 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3086 * configure.in: Don't pass cpu to config.bfd.
3088 Thu Aug 12 16:43:04 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3090 * Makefile.in ($(NM_PROG)): Depend on demangle.o.
3091 (demangle.o): New target.
3092 (cplus-dem.o): Depend on it, to force compilation order when doing
3095 * nm.c (print_symbol_info_{bsd,sysv,posix}): Take a bfd arg.
3096 (struct output_fns print_symbol_info): Ditto.
3097 (long_options, usage, main): Add -C --demangle option.
3098 (print_symname): New function, demangling if requested.
3099 (print_symbols, print_symbol_info_{bsd,sysv,posix}): Use it.
3101 Wed Aug 11 22:57:23 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3103 * Makefile.in: Put CFLAGS last in compilation rules and omit from
3104 linking rules. Use ARCHDEFS to compile objdump.c.
3105 Update dependencies.
3106 * configure.in: Construct ARCHDEFS based on the BFD target makefile
3108 * objdump.c: Conditionalize calls to the print_insn_ARCH functions
3109 according to ARCHDEFS.
3111 Thu Aug 12 08:06:15 1993 Ian Lance Taylor (ian@cygnus.com)
3113 * ar.c: Removed obsolete and non-functional GNU960 code.
3115 Wed Aug 11 13:08:26 1993 Ian Lance Taylor (ian@cygnus.com)
3117 * size.c (berkeley_sum): New function.
3118 (bsssize, datasize, textsize): New global variables.
3119 (bss_section_name, data_section_name, text_section_name): Removed.
3120 (print_berkeley_format): Map berkeley_sum over all the sections,
3121 rather than only reporting sizes of specifically named sections.
3122 * Makefile.in ($(OBJDUMP_PROG)): Removed dependency on size.o.
3124 Tue Aug 10 10:46:01 1993 Ian Lance Taylor (ian@cygnus.com)
3126 * nlmconv.c, nlmconv.h, nlmheader.y: New files for program to
3127 convert object files into NetWare Loadable Modules.
3128 * Makefile.in (NLMCONV_PROG): New macro, define to be nlmconv.
3129 (PROGS): Add NLMCONV_PROG.
3130 (nlmheader.c, nlmheader.o, nlmconv.o, $(NLMCONV_PROG)): New
3133 Thu Aug 5 15:48:32 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com)
3135 * Makefile.in: define MAKEOVERRIDES to an empty string
3137 Wed Aug 4 17:08:08 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3139 * objcopy.c (copy_file): Make failures to process a file nonfatal.
3141 Mon Aug 2 11:28:23 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3143 * nm.c: Add -B option, like --format=bsd.
3145 Tue Jul 27 16:29:54 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3147 * objcopy.c (copy_file): If the file is neither an object nor an
3148 archive, give an error rather than returning success.
3150 Mon Jul 19 16:13:40 1993 Ken Raeburn (raeburn@rtl.cygnus.com)
3152 * objdump.c (objdump_print_address): Prefer non-local symbols over
3153 local ones, and especially discriminate against debugging symbols.
3154 Also, for relocateable files, try to find a symbol in the current
3155 section, instead of picking one from some random section with a
3156 convenient value (read, section offset).
3157 (disassemble_data): Cast argument to malloc to size_t first.
3158 (dump_data): Likewise.
3159 (dump_relocs): If a single section name is specified, show relocs
3160 only for that section. Otherwise, silently omit sections without
3161 relocs. Format table nicely even if values are printed using 16
3162 digits instead of 8.
3164 Fri Jul 16 15:19:59 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3166 * nm.c: Changes for final version of POSIX.2.
3167 (print_symbol_filename_{bsd,sysv,posix}): New functions.
3168 (formats): Add an element for a pointer to them.
3169 (print_symbols): Call it.
3170 (print_object_filename_posix, print_archive_member_posix): Produce
3171 output according to new POSIX.2 spec.
3173 * strings.c (print_strings): Handle STREAM being NULL.
3174 (strings_a_section): Pass a NULL.
3175 (main): Don't open /dev/null.
3177 Thu Jul 15 12:44:09 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3179 * objdump.c (disassemble_data): Handle the m88k.
3180 (display_bfd): Use bfd_errmsg, rather than just claiming that the
3181 bfd is not an object file.
3183 Mon Jul 12 17:55:34 1993 K. Richard Pixley (rich@cygnus.com)
3185 * Makefile.in (TAGS): make work again by naming directories
3186 explicitly rather than depending on undefined macros.
3187 (INSTALL_XFORM): correct bad install target.
3189 Fri Jul 2 16:58:34 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3191 * strings.c: Doc fixes.
3193 Sun Jun 27 13:35:24 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3195 * Makefile.in: Note dependencies on bucomm.h.
3196 (cplus-dem.o): Link c++filt with version.o.
3198 * strings.c: Include bucomm.h and add prototypes to other decls.
3201 * bucomm.h: Declare xrealloc.
3203 * nm.c, objcopy.c, objdump.c, size.c, strings.c (main, usage): Add
3204 --help option. Put "GNU" in the version message.
3205 (usage): Take stream and exit status as args.
3206 (main): Pass new args to usage.
3208 Fri Jun 25 23:12:12 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3210 * strings.c, strings.1: New files.
3211 * binutils.texi: Document strings.
3212 * Makefile.in: Add rules for it.
3214 Fri Jun 25 20:44:43 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3216 * objdump.c: Use size-independent bfd elf section names.
3218 Sun Jun 20 23:09:06 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3220 * objdump.c (objdump_print_address): Handle wide offsets by
3221 calling sprintf_vma.
3223 Fri Jun 18 14:29:12 1993 Per Bothner (bothner@deneb.cygnus.com)
3225 * objdump.c (syms2): Removed unused variable.
3226 * objdump.c (remove_useless_symbols): New function.
3227 * objdump.c (comp): Simplify.
3228 * objdump.c (dis-assemble_data): Make simpler and more
3229 efficient how we filter out useless symbols: Just filter
3230 BEFORE the sort (using remove_useless_symbols).
3231 * objdump.c (objdump_print_address): Simplify.
3232 Change output syntax to match gdb.
3234 Thu Jun 17 16:53:56 1993 david d `zoo' zuhn (zoo@cygnus.com)
3236 * Makefile.in: canonicalize install.sh; for use within
3237 this directory (and subdirs)
3239 Mon Jun 14 12:13:22 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
3241 * Makefile.in (install, install-info): remove parentdir support,
3242 use INSTALL_XFORM; define INSTALL_XFORM
3244 Thu Jun 10 17:29:21 1993 Per Bothner (bothner@cygnus.com)
3246 * objcopy.c (copy_object): Fix bad size passed to xmalloc().
3248 Mon Jun 7 12:41:12 1993 Per Bothner (bothner@rtl.cygnus.com)
3250 * Makefile.in (INCLUDES): Add -I../bfd for sysdep.h and bfd.h.
3251 * configure.in: No longer need to configure to get sysdep.h.
3252 * objcopy.c (copy_object): Fix symbol table handling.
3254 Fri Jun 4 17:20:03 1993 Per Bothner (bothner@cygnus.com)
3256 * objcopy.c (filter_symbols): Cannot filter the symbols
3257 in place, because that confuses the relocs, so take separate
3258 parameter for output array.
3259 * objcopy.c (sympp): Make two variables: isympp and osympp.
3260 * objcopy.c (copy_object): Allocate separate array (osympp)
3261 for filtered symbols.
3263 Fri Jun 4 10:51:44 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3265 * Makefile.in: change recursion test to presence of a configured
3268 Thu Jun 3 14:05:57 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3270 * Makefile.in (underscore.c): Hack the backquoted command so it
3271 doesn't cause Solaris make to bomb.
3273 Thu Jun 3 10:40:19 1993 Jeffrey Osier (jeffrey@cygnus.com)
3275 * Makefile.in: added c++filt and objcopy to MANPAGES variable
3276 * .Sanitize: keep c++filt.1 and objcopy.1
3278 Thu Jun 3 00:32:52 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3280 * Makefile.in: rename LOADLIBES to EXTRALIBS
3282 Wed Jun 2 18:30:24 1993 Jeffrey Osier (jeffrey@cygnus.com)
3284 * c++filt.1, objcopy.1: new man pages
3286 Fri May 28 15:01:24 1993 Per Bothner (bothner@rtl.cygnus.com)
3288 * Makefile.in (install): Also install ar and ranlib in
3289 $(tooldir)/bin; needed for building libgcc.a.
3290 * objdump.c (objdump_print_address): Fix the check
3291 "coincidental" label matches by dis-allowing undefined
3294 Thu May 27 16:58:31 1993 Jeffrey Osier (jeffrey@cygnus.com)
3296 * biutils.texi: revised c++filt chapter
3298 Wed May 26 17:24:17 1993 Ian Lance Taylor (ian@cygnus.com)
3300 * Makefile.in (FLAGS_TO_PASS): Pass down CC and CFLAGS.
3302 Tue May 25 00:26:47 1993 Ken Raeburn (raeburn@cygnus.com)
3304 * objdump.c (slurp_symtab): Print warning for bad symbol table.
3305 (bfd_elf32_find_section, Elf32_Internal_Shdr): Updated
3306 declarations and uses.
3308 * Makefile.in (DISTSTUFF): Don't build binutils.mm.
3310 Fri May 21 10:51:19 1993 David J. Mackenzie (djm@rtl.cygnus.com)
3312 * nm.c: Add -f/--format, -P/--portability, -t/--radix options.
3313 Make global variables static.
3314 (main): Make -v like -n, not -V, and make -A like -o, for POSIX.2.
3315 (set_print_radix, set_output_format,
3316 print_{object_filename,archive_filename,archive_member,symbol_info}
3317 {bsd,sysv,posix}): New functions.
3318 (display_file, print_symbols): Call them.
3320 * ar.c: Improve error messages.
3322 * nm.c (main): Handle long options that just set a flag.
3324 * nm.c (main), ar.c (do_show_version), objcopy.c (main), size.c
3325 (main): Exit after printing the version number, per the GNU coding
3328 Mon May 17 13:20:25 1993 Per Bothner (bothner@cygnus.com)
3330 * README, Makefile.in: Minor updates for 2.2.
3332 Fri May 14 11:12:26 1993 Per Bothner (bothner@cygnus.com)
3334 * Makefile.in (underscore.c): Automatically generate
3335 (using nm) a file with the variable prepends_underscore.
3336 * Makefile.in (c++filt): Link underscore.o with cplus-dem.o
3337 so that initial underscores get removed iff appropriate.
3338 * binutils.texi: Preliminary documentation for c++filt.
3339 * Makefile.in, binutils.texi: Set to version 2.2.
3341 * NEWS: Mention copy->objcopy renaming and new c++filt program.
3343 Wed May 12 12:05:36 1993 Ian Lance Taylor (ian@cygnus.com)
3345 * Makefile.in (cplus-dem.o, $(DEMANGLER_PROG)): Build the
3346 demangler via cplus-dem.o, rather than directly from the .c file.
3348 * objcopy.c: Renamed from copy.c, updated comments accordingly.
3349 * Makefile.in, binutils.texi: Renamed copy to objcopy.
3350 * is-strip.c, maybe-strip.c, not-strip.c: Updated comments for
3351 rename of copy to objcopy.
3353 Mon May 10 17:20:18 1993 Per Bothner (bothner@cygnus.com)
3355 * binutils.texi (strip, -v option): Fix typo.
3357 Fri May 7 13:57:50 1993 Ian Lance Taylor (ian@cygnus.com)
3359 * Makefile.in (RUNTEST): Define.
3360 (FLAGS_TO_PASS): Pass down RUNTEST.
3362 Tue May 4 10:06:50 1993 Ian Lance Taylor (ian@cygnus.com)
3364 * Makefile.in (DEMANGLER_PROG): Name it c++filt.
3365 (PROG): Also build and install COPY_PROG.
3367 Mon May 3 19:11:48 1993 Per Bothner (bothner@cygnus.com)
3369 * Makefile.in: Change definition of $(tooldir) to match FSF.
3371 Wed Apr 28 23:41:32 1993 David J. Mackenzie (djm@rtl.cygnus.com)
3373 * size.c (usage): Add missing options.
3374 (main): Clean up option parser.
3376 * objdump.c (usage): Add missing options.
3377 (display_file): Print program name before calling
3380 * nm.c (usage): Add missing options.
3381 (main): Clean up option parser.
3382 (display_file): Print program name before calling
3385 * copy.c (copy_usage, strip_usage): Add missing options.
3387 * ar.c (usage): New function.
3389 (open_inarch, do_quick_append): Print program name before calling
3392 Thu Apr 22 15:01:35 1993 Ian Lance Taylor (ian@cygnus.com)
3394 * nm.c (main): Accept and ignore -A and -B for MIPS compatibility.
3396 Mon Apr 19 14:06:59 1993 Rob Savoye (rob@cygnus.com)
3398 * Makefile.in: Added FLAGS_TO_PASS so tests get run on freshly
3399 built binaries if they exist. (otherwise the path)
3401 Wed Apr 7 22:22:50 1993 Rob Savoye (rob@cygnus.com)
3403 * Makefile.in: Changed check target to use DejaGnu.
3405 Thu Apr 1 12:37:13 1993 Jim Kingdon (kingdon@cygnus.com)
3407 * Makefile.in: Remove am29k-pinsn.c, i960-pinsn.c.
3408 objdump.c: a29k and i960 are `disassemble' not `print'.
3410 * objdump.c: Rename print_address to objdump_print_address
3411 and change parameters.
3412 (disassemble_data): Use objdump_print_address.
3414 Wed Mar 31 10:25:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3416 * objdump.c (disassemble_data): print_insn_sparc is now a
3417 `disassemble' not a `print'.
3418 Makefile.in: Remove sparc-pinsn.c (now in libopcodes.a).
3420 * objdump.c (disassemble_data): Use new read_memory_func stuff.
3422 Thu Mar 25 10:38:11 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3424 * objdump.c (fprintf): Declaration of variadic function had better
3425 be a prototype for ANSI C systems.
3427 Mon Mar 22 23:19:46 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3429 * Makefile.in: rename test-install to install-check
3431 Fri Mar 19 14:40:08 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3433 * objdump.c (disassemble_data): Add H8500.
3435 Fri Mar 19 10:56:51 1993 Jim Kingdon (kingdon@cygnus.com)
3437 * objdump.c (usage): Mention long options.
3439 Thu Mar 18 14:22:17 1993 Per Bothner (bothner@rtl.cygnus.com)
3441 * nm.c: Modify behavior of -o flag for archives to match
3442 BSD4.4 and Sunos 4: Prefix archive name before each line.
3444 * m68k-pinsn.c: Removed. Subsumed by ../opcodes/m68k-dis.c.
3445 * i386-pinsn.c: Removed. Subsumed by ../opcodes/i386-dis.c.
3446 * Makefile.in: Adjust accordingly.
3447 * objdump.c: Support new-style disassemblers (ones that use
3448 the interface of ../include/dis-asm.h).
3450 Thu Feb 25 15:57:00 1993 Per Bothner (bothner@rtl.cygnus.com)
3452 * Makefile.in: When making tar file, remove texinfo/*,
3453 except for texinfo/texinfo.tex.
3454 * ardup.c: Add extern declaration of strdup.
3455 * Makefile.in (testsuite): Add 'else true' since otherwise
3456 Ultrix /bin/sh complains.
3458 Wed Feb 24 19:44:18 1993 Per Bothner (bothner@rtl.cygnus.com)
3460 * Makefile.in: Set VERSION to 2.1.
3461 * README, NEWS: Updates.
3462 * nm.c: Add -v as a synonym for -V.
3464 Tue Feb 23 19:00:50 1993 Mike Werner (mtw@poseidon.cygnus.com)
3466 * configure.in: added testsuite to configdirs.
3467 * Makefile.in: added support for building testsuite.
3469 Mon Feb 22 22:52:10 1993 Per Bothner (bothner@rtl.cygnus.com)
3471 * objdump.c (disassemble_data): Print function names when
3472 given by bfd_find_nearest_line. If not - still print
3475 Mon Feb 22 07:54:03 1993 Mike Werner (mtw@poseidon.cygnus.com)
3477 * binutils/testsuite: made modifications to testcases, etc., to allow
3478 them to work properly given the reorganization of deja-gnu and the
3479 relocation of the testcases from deja-gnu to a "tool" subdirectory.
3481 Mon Feb 22 10:27:24 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3483 * objdump.c (dump_data): Free up section contents each time
3484 through the loop. Reported by minyard@bnr.ca.
3486 Sun Feb 21 10:55:55 1993 Mike Werner (mtw@poseidon.cygnus.com)
3488 * binutils/testsuite: Initial creation of binutils/testsuite.
3489 Migrated dejagnu testcases and support files for testing nm to
3490 binutils/testsuite from deja-gnu. These files were moved "as is"
3491 with no modifications. This migration is part of a major overhaul
3492 of dejagnu. The modifications to these testcases, etc., which
3493 will allow them to work with the new version of dejagnu will be
3494 made in a future update.
3496 Fri Feb 12 10:05:20 1993 Fred Fish (fnf@cygnus.com)
3498 * Makefile.in (LIBIBERTY_SRC_DIR, LIBIBERTY_BIN_DIR): New macros.
3499 * Makefile.in (LIBIBERTY): Use LIBIBERTY_BIN_DIR.
3500 * Makefile.in (DEMANGLER_PROG): New program to build. Add macro
3502 * Makefile.in (PROGS): Add DEMANGLER_PROG.
3504 Tue Jan 26 11:56:33 1993 Ian Lance Taylor (ian@cygnus.com)
3506 * copy.c, nm.c, objdump.c, size.c: Use new bfd_is_com_section
3507 macro rather than checking for equality to bfd_com_section.
3509 Fri Jan 8 15:50:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3511 * objdump.c (disassemble_data): Fix code to find first useless
3514 Thu Jan 7 13:13:31 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3516 * objdump.c (disassemble_data): Use mips_print_insn for MIPS.
3517 Don't core dump if bfd_find_nearest_line returns false.
3519 Wed Jan 6 17:14:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3521 * objdump.c (disassemble_data): know how to disassemble z8000s
3524 Wed Jan 6 15:16:27 1993 Per Bothner (bothner@cygnus.com)
3526 * arsup.h (interactive), bucomm.h (program_name): Prefix
3527 with 'extern', to avoid warnings from some compilers.
3529 Wed Jan 6 15:14:11 1993 Per Bothner (bothner@rtl.cygnus.com)
3531 * arparse.y: fix unnecessary shift/reduce
3533 Tue Dec 22 15:46:56 1992 Per Bothner (bothner@rtl.cygnus.com)
3535 * Makefile.in: Make check depend on all.
3536 * Makefile.in (distclean): Remove sysdep.h.
3537 * size.c: Use %u format where appropriate.
3538 * objdump.c: Standardize: L_SET -> SEEK_SET.
3539 * objdump.c: Use new macro bfd_asymbol_bfd.
3540 * configure.in: Allow std-host as the default ${mys_host}.
3542 Thu Dec 17 19:38:19 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3544 * Makefile.in: added dvi target, define and use TEXI2DVI
3546 Tue Dec 15 18:05:07 1992 Per Bothner (bothner@cygnus.com)
3548 * Makefile.in (dist): Fix permissions before release.
3549 * size.c: Use bfd_size_type (and long) where appropriate.
3550 * ar.c: Make writing a map the default, to be compatible
3551 with SYSV and Posix.2. Remove some bogus kludges that
3552 handled __.SYMDEF directly.
3555 Mon Nov 9 13:36:53 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3557 * Makefile.in: flex no longer needs the -S flag
3559 Sat Nov 7 15:06:13 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3561 * ar.c (extract_file): utime needs a pointer to a utimbuf
3563 * Makefile.in: handle -I includes better, adding $(BASEDIR)/bfd to
3564 the list (since some of the bfd/hosts/*.h files include other
3565 files from that directory)
3567 Fri Nov 6 00:12:51 1992 John Gilmore (gnu@cygnus.com)
3569 * i960-pinsn.c (MEM_MAX, MEM_SIZ): Set upper bound properly.
3571 Thu Nov 5 03:37:15 1992 John Gilmore (gnu@cygnus.com)
3573 Clean up some old BFD ansification macros.
3575 * arsup.h, bucomm.h, objdump.h: Remove EXFUN from binutils.
3576 It still remains as a local macro in gmalloc.c, which is derived
3577 from some other copy of GNU Malloc somewhere (FIXME).
3579 * ar.c, objdump.c, size.c: Replace EXFUN with PROTO. Make static
3581 * arsup.h: Declare extract_files.
3583 Mon Nov 2 12:42:11 1992 Ian Lance Taylor (ian@cygnus.com)
3585 * ar.c (extract_file): instead of checking USG: if POSIX_UTIME,
3586 use utime and utimbuf structure, otherwise if USE_UTIME use utime
3587 and array of two longs, otherwise use utimes.
3589 Thu Oct 15 13:57:35 1992 Per Bothner (bothner@cygnus.com)
3591 * binutils.tex: Document yesterday's changes to strip and copy.
3593 Wed Oct 14 13:22:14 1992 Per Bothner (bothner@cygnus.com)
3595 * copy.c: Re-do command-line parsing to use getopt_long().
3596 Add long option names. Re-think option letters to be more
3598 * copy.c: New function filter_symbols() for stripping only
3599 debug-symbols and/or local symbols. Use these to support
3600 the previously-missing options of the old FSF strip.
3602 Tue Oct 13 01:24:20 1992 John Gilmore (gnu@cygnus.com)
3604 * configure.in (host): Use ${srcdir}/../bfd/configure.host rather
3605 than repeating a copy of it here.
3607 Wed Oct 7 12:53:52 1992 Ken Raeburn (raeburn@cygnus.com)
3609 * copy.c (main): Even if is_strip, accept -d argument indicating
3610 alternate output format. Needed by gdb for Nindy.
3612 * m68k-pinsn.c (print_insn_arg): Handle new "`" operand type.
3614 Tue Oct 6 16:33:56 1992 Jeffrey Osier (jeffrey@cygnus.com)
3616 * binutils.texi: added documentation for "copy"
3618 Tue Oct 6 14:22:56 1992 Per Bothner (bothner at PersSony)
3620 * Makefile.in (*clean rules): Some cleaning up.
3621 * Makefile.in (dist): Make diststuff in gprof for a dist.
3623 * ar.c (do_show_version): New function.
3624 * ar.c (main): Fix so "ar -V" works.
3626 Thu Oct 1 22:44:45 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3628 * configure.in: now uses the cpu-vendor-os triple instead of
3631 Fri Sep 25 22:41:08 1992 John Gilmore (gnu@cygnus.com)
3633 * i960-pinsn.c: Change bzero to memset.
3634 * sparc-pinsn.c: Change index to strchr.
3636 Mon Sep 21 14:39:56 1992 Ian Lance Taylor (ian@cygnus.com)
3638 * m68k-pinsn (print_insn_arg, fetch_arg): added support for
3639 operands to memory management instructions, from WRS.
3641 Tue Sep 15 15:26:38 1992 Ian Lance Taylor (ian@cygnus.com)
3643 * Makefile.in (install): if $(tooldir) exists, install nm and
3644 strip in $(tooldir)/bin.
3646 Thu Sep 3 11:57:40 1992 Per Bothner (bothner@rtl.cygnus.com)
3648 * Makefile.in: Let's call it version 2.0.
3650 Wed Sep 2 00:25:13 1992 Per Bothner (bothner@rtl.cygnus.com)
3652 * Makefile.in: Bump to version 0.98.
3653 * TODO, README: Minor updates.
3655 * Makefile.in: Added mostlyclean, distclean rules,
3656 and cleaned up clean, realclean.
3658 Sun Aug 30 21:18:59 1992 Ian Lance Taylor (ian@cygnus.com)
3660 * Makefile.in: map program names through program_transform_name
3663 Sun Aug 30 18:09:03 1992 Per Bothner (bothner@rtl.cygnus.com)
3665 * Makefile.in: Bump to versions 1.97.90.
3666 * cplus-dem.c: Removed. Was nowhere used - and if some
3667 programs are changed to to demangling should now use the
3668 versions in libiberty.
3670 Thu Aug 27 12:58:09 1992 Brendan Kehoe (brendan@cygnus.com)
3672 * configure.in: add we32k
3674 Mon Aug 24 14:53:42 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3676 * ar.c (map_over_members): if the element of the archive has a
3677 null name, fill it in.
3679 * nm.c (do_one_rel_file): only warn if a bfd's flags say there
3680 will be symbols and there aren't any.
3682 Wed Aug 19 11:20:25 1992 Ian Lance Taylor (ian@cygnus.com)
3684 * m68k-pinsn.c: handle new operand type 'r', introduced for cas2.
3686 Tue Aug 18 20:45:48 1992 Rob Savoye (rob@cygnus.com)
3688 * nm.c objdump.c: Added support for a +version (-V)
3689 to print the version number.
3691 * ar.c, copy.c: Added support for a -V option to print
3694 Tue Aug 18 13:28:44 1992 Ian Lance Taylor (ian@cygnus.com)
3696 * config/mh-apollo68v: removed -g from CC definition.
3698 * Makefile.in: always create installation directories.
3700 Mon Aug 17 18:33:41 1992 Per Bothner (bothner@rtl.cygnus.com)
3702 * m68k-pinsn.c: Minor fix in style of output (don't use
3703 range to indicate floating point control registers).
3705 Tue Aug 11 23:42:21 1992 Per Bothner (bothner@cygnus.com)
3707 * ar.c (main): Don't *always* set the verbose flag!
3709 Wed Aug 5 11:25:27 1992 Per Bothner (bothner@rtl.cygnus.com)
3711 * copy.c: When is_strip (because it is invoked as the strip
3712 program), follow traditional argv processing:
3713 'strip file1 file2' now strips file1 and file2, rather
3714 than stripping file1 (as input), leaving output in file2.
3716 Mon Jul 27 16:28:08 1992 Per Bothner (bothner@rtl.cygnus.com)
3718 * objdump.c (display_info, display_info_table): Call
3719 bfd_set_format() on dummy bfd before using it (twice).
3720 * ar.c: Make sure archive is created on command 'r'
3721 even when no elements are inserted. (Clean up and
3722 simplify some non-working related code.)
3724 Mon Jul 20 02:48:38 1992 D. V. Henkel-Wallace (gumby@cygnus.com)
3726 * configure.in: hppa support doesn't assume hp OS (from sef).
3728 Sat Jul 18 14:35:22 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3730 * configure.in: recognize hppa hosts (bsd & hpux), error messages
3731 to stderr, not stdout
3733 Fri Jul 17 18:39:44 1992 K. Richard Pixley (rich@rtl.cygnus.com)
3735 * ar.1, binutils.texi, i960-pinsn.c, nm.1, objdump.1, ranlib.1,
3736 size.1, sparc-pinsn.c, strip.1: removed rcsid's.
3738 Thu Jul 16 16:55:24 1992 K. Richard Pixley (rich@rtl.cygnus.com)
3740 * Makefile.dos: removed rcsid.
3742 Thu Jul 16 08:23:07 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3744 * objdump.c (display_bfd): print state of BFD_IS_RELAXABLE too
3746 Tue Jun 30 20:26:15 1992 D. V. Henkel-Wallace (gumby@cygnus.com)
3748 * Makefile.in: Add program_suffix (parallel to program_prefix)
3750 Thu Jun 25 04:52:45 1992 John Gilmore (gnu at cygnus.com)
3752 * nm.c (sorters): Lint. Remove excess whitespace.
3754 Wed Jun 24 13:48:07 1992 Per Bothner (bothner@cygnus.com)
3756 * nm.c (valueof macro): Add missing parentheses.
3757 (Their lack screwed up numeric_forward().)
3759 Sun Jun 14 10:33:27 1992 John Gilmore (gnu at cygnus.com)
3761 * objdump.c (dump_elf_stabs): Also dump .stab.index and
3762 .stab.excl sections.
3763 (dump_elf_stabs_1): Split out main body of old dump_elf_stabs.
3764 * objdump.1, binutils.texi: Document new sections dumped.
3766 Fri Jun 12 22:23:35 1992 John Gilmore (gnu at cygnus.com)
3768 * size.c, objdump.c, bucomm.c: Lint.
3770 Thu Jun 11 01:19:06 1992 John Gilmore (gnu at cygnus.com)
3772 * objdump.c (dump_elf_stabs): New feature: --stabs prints out a
3773 .stab section from an ELF file. Installed under #ifdef
3774 ELF_STAB_DISPLAY so it can be easily disabled, since it requires
3775 bfd-internals header files and such.
3776 * objdump.1, binutils.texi: Update for --stabs. Also fix
3777 objdump's doc to use -- rather than + for long options.
3778 (FIXME: Not yet fixed everywhere in binutils.texinfo.)
3780 Wed Jun 10 07:53:24 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3782 * objdump.c(display_info), patches from
3783 mohring@informatik.tu-muenchen.de to print the table much more
3786 Thu May 28 13:36:16 1992 Per Bothner (bothner@rtl.cygnus.com)
3788 * objdump.c: Add another enum->int cast, for the sake of
3789 old compilers (such as PCC).
3791 Wed May 27 13:01:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3793 * arlex.l: Don't include <sysdep.h> (unneeded conflicts).
3794 Add declaration of strdup().
3796 Fri May 22 13:40:37 1992 Per Bothner (bothner@cygnus.com)
3798 * Makefile.in: Use srcdir instead of VPATH in ldgram/ldlex
3799 rules, since these are used when building a distribution.
3800 * Makefile.in (arlex.c): Don't re-direct output, since that
3801 leaves a bogus output files if it fails.
3803 * arlex.l: Make work with lex, for what it's worth.
3804 * Makefile.in: Better lex support.
3805 * Makefile.in (dist): Generate flex and bison outputs
3808 Thu May 14 17:17:59 1992 K. Richard Pixley (rich@rtl.cygnus.com)
3810 * Makefile.in: get BISON definition right.
3812 Fri May 8 07:47:08 1992 K. Richard Pixley (rich@cygnus.com)
3814 * sanity.sh: default TMPDIR to ".".
3816 Thu May 7 12:34:50 1992 Roland H. Pesch (pesch@fowanton.cygnus.com)
3818 * binutils.texi: add doc for ar command language.
3820 Wed May 6 18:05:36 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3822 * arparse.y: make END call ar_end
3823 * arsup.c (ar_end): added, deletes temp file if archive session
3827 Wed May 6 11:08:53 1992 K. Richard Pixley (rich@rtl.cygnus.com)
3829 * Makefile.in: use bison & flex from ../ if they exist. Also,
3832 * sanity.sh: remove temporary directory when finished.
3834 Tue May 5 12:00:58 1992 Per Bothner (bothner@rtl.cygnus.com)
3836 * Makefile.in: Bump to version 1.97.
3837 * ar.c: Declare errno for machines that need it.
3839 Mon May 4 23:29:51 1992 John Gilmore (gnu@cygnus.com)
3841 * objdump.c (display_info): Handle error cases without coredump.
3842 Close the dummy temporary file we open in the loop.
3843 * Makefile.in (arsup.o): Add kludge to build with Sun Make.
3845 Fri May 1 16:20:23 1992 K. Richard Pixley (rich@cygnus.com)
3847 * Makefile.in: added test-install target.
3849 * sanity.sh: new file.
3851 * Makefile.in: use sanity test on make check.
3853 Tue Apr 21 13:38:37 1992 K. Richard Pixley (rich@cygnus.com)
3855 * Makefile.in: rework CFLAGS so that they can be passed on the
3856 command line to make. Remove MINUS_G. Default CFLAGS to -g.
3858 Wed Apr 15 14:33:07 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3860 * arsup.c, arsup.h, arparse.y, arlex.l: support for archive
3863 Fri Mar 6 21:54:53 1992 K. Richard Pixley (rich@cygnus.com)
3865 * Makefile.in: added check target.
3867 Thu Mar 5 21:35:49 1992 K. Richard Pixley (rich@cygnus.com)
3869 * Makefile.in: added clean-info target.
3871 Tue Mar 3 15:36:37 1992 K. Richard Pixley (rich@rtl.cygnus.com)
3873 * Makefile.in: remove $(COPY_PROG) from PROGS. It shouldn't be
3874 installed. added tooldir and program_prefix.
3876 Wed Feb 26 18:04:40 1992 K. Richard Pixley (rich@cygnus.com)
3878 * Makefile.in, configure.in: removed traces of namesubdir,
3879 -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
3880 copyrights to '92, changed some from Cygnus to FSF.
3882 Sun Feb 16 12:53:02 1992 Per Bothner (bothner at cygnus.com)
3884 * Makefile.in: Bump version to 1.96, and remove -beta
3885 suffix from distribution name.
3886 * m68k-pinsn.c: New macro COERCE_SIGNED_CHAR to extract
3887 the signed value of a character (even if chars are unsigned).
3888 * sparc-pinsn.c: Add new operand types.
3890 Thu Feb 6 12:14:19 1992 Steve Chamberlain (sac at rtl.cygnus.com)
3892 * objdump.c (disassemble_data): don't print a section's contents
3893 if it's not loadable (eg bss)
3895 Tue Jan 28 11:11:06 1992 Steve Chamberlain (sac at rtl.cygnus.com)
3897 * m68k-pinsn.c (print_insn_arg): fixed so that -ve branch
3898 displacements don't get printed as large +ve ones.
3900 Fri Jan 24 14:47:53 1992 Steve Chamberlain (sac at rtl.cygnus.com)
3902 * copy.c, nm.c, objdump.c, size.c : changed to use the
3906 Mon Dec 30 18:34:41 1991 Per Bothner (bothner at cygnus.com)
3908 * bucomm.c (print_arelt_descr): Tweek the output format
3909 so that 'ar tv' output follows Posix 1003.2/D11.
3910 Output is now also identical to Sun's (except __.SYMDEF).
3912 Mon Dec 30 06:09:53 1991 John Gilmore (gnu at cygnus.com)
3914 * Makefile.in: Make `make' output more readable.
3916 Wed Dec 18 15:04:45 1991 Per Bothner (bothner at cygnus.com)
3918 * Makefile.in: Bump to version 1.94.
3920 Wed Dec 11 16:48:09 1991 Steve Chamberlain (sac at cygnus.com)
3922 * ar.c: added "b" to fopens for dos
3923 * configdj.bat, makefile.dos new files from DJ
3925 Tue Dec 10 04:07:26 1991 K. Richard Pixley (rich at rtl.cygnus.com)
3927 * Makefile.in: infodir belongs in datadir.
3929 Sat Dec 7 17:09:37 1991 Steve Chamberlain (sac at rtl.cygnus.com)
3931 * bucomm.h: created to hold prototypes of bucomm.c
3932 * objdump.h: created to hold prototyes of objdump.c
3933 * am29k-pinsn.c: include objdump.h
3934 * ar.c: include bucomm.h, get ar.h from the right place and
3936 * bucomm.c: defunize bfd_fatal
3937 * copy.c: include bucomm.h, lint.
3938 * i960-pinsn.h: include bucomm.h
3939 * m68k-pinsn.h: lint
3940 * nm.c: include bucomm.h, lint
3942 * sparc-pinsn.c: include objdump.h
3946 Fri Dec 6 23:02:14 1991 K. Richard Pixley (rich at rtl.cygnus.com)
3948 * Makefile.in: added standards.text support. install using
3949 INSTALL_PROGRAM and INSTALL_DATA.
3951 * configure.in: configure now does all of it's work from objdir so
3952 make file existence tests against ${srcdir}.
3954 Thu Dec 5 22:46:22 1991 K. Richard Pixley (rich at rtl.cygnus.com)
3956 * Makefile.in: idestdir and ddestdir go away. Added copyrights
3957 and shift gpl to v2. Added ChangeLog if it didn't exist. docdir
3958 and mandir now keyed off datadir by default.
3960 Wed Dec 4 22:42:03 1991 Per Bothner (bothner at cygnus.com)
3962 * Makefile.in: Bump to version 1.93.
3963 * Makefile.in: Add make-strip.o:maybe-strip.c dependency
3964 for make versions that provide half-baked VPATH-support (e.g. Sun's).
3965 * size.c: Improvements suggested by
3966 "david d [zoo] zuhn" <zoo@aps1.spa.umn.edu>:
3967 - Don't emit (Berkeley) headers if no files were found.
3968 - Return a non-zero return code on failure.
3970 Sat Nov 30 21:34:19 1991 Steve Chamberlain (sac at rtl.cygnus.com)
3972 Changes due to include file renaming:
3973 * am29k-pinsn.c: a29k-opcode.h -> opcode/a29k.h
3974 * sparc-pinsn.c: sparc-opcode.h -> opcode/sparc.h
3975 * m68k-pinsn.c: m68k-opcode.h -> opcode/m68k.h
3976 * nm.c: stab.gnu.h -> aout/stab_gnu.h
3978 Tue Nov 19 19:20:43 1991 Per Bothner (bothner at cygnus.com)
3980 * README: Mention MINIMIZE flag for bfd's make.
3982 Mon Nov 18 12:05:37 1991 Per Bothner (bothner at cygnus.com)
3984 * README: Various improvements.
3986 Sun Nov 17 23:40:59 1991 Per Bothner (bothner at cygnus.com)
3988 * Makefile.in: Bump to version 1.92.
3989 * version.c, Makefile.in: Get version string from Makefile.
3990 * copy.c, is-strip.c, not-strip.c, maybe-strip.c, Makefile.in:
3991 Make the same change that we earlier did for ar/ranlib:
3992 Generate two different binaries for strip and copy and use
3993 a global variable with different values to distinguish
3994 ostrip from copy. (-1 means to use argv[0] to decide,
3995 so you can get the old behavior, but it is no longer the default).
3996 * copy.c (copy_file): Set EXEC_P of output bfd if input is so.
3997 * copy.c (main): If is_strip==-1, compare last 5 chars
3998 of argv[0], not the whole path.
3999 * copy.c (main): Return 0, not 1.
4000 * copy.c (setup_sections): Fix due to change in bfd_make_section
4001 now failing if asked for a duplicate section.
4002 * strip.c, ostrip.c: Removed obsolete files.
4003 * ar.c, not-ranlib.c, maybe-ranlib.c:
4004 Change encoding of is_ranlib variable to be consistent
4005 with is_strip for strip.copy (i.e -1 to means use argv[0]).
4007 Thu Nov 14 20:11:02 1991 Per Bothner (bothner at cygnus.com)
4009 * version.c (program_version): Update to version 1.92.
4011 Tue Nov 12 16:17:53 1991 Per Bothner (bothner at cygnus.com)
4013 * ar.c (get_pos_bfd): Previous fix was missing a "break".
4015 Thu Nov 7 08:55:56 1991 Steve Chamberlain (sac at cygnus.com)
4017 * am29k-pinsn.c: Fixed bug in mtacc, dmac and fmac instruction
4018 encodings. (Thaks to David Wood)
4020 Sun Nov 3 14:50:23 1991 Per Bothner (bothner at cygnus.com)
4022 * Makefile.in ($(DIST_NAME).tar.Z), TODO: Various fixes.
4023 * ar.c (get_pos_bfd): Fix to handling of before/after
4024 positioning options.
4025 * bucomm.c (fatal): MISSING_VFPRINTF is no longer an issue,
4026 since libiberty contains vfprintf etc if otherwise missing.
4027 * m68k-pinsn.c (print_insn_arg): Support BB/BW/BL
4028 type operands, as used by branch instructions.
4029 * nm.c: Delegate printing of symbols to BFD,
4030 by using bfd_print_symbol to do the formatting.
4032 Mon Oct 28 11:20:47 1991 Steve Chamberlain (steve at cygnus.com)
4034 * ar.c (write_archive.c): added unlink before rename since some
4035 systems can't rename onto an existant file.
4037 Mon Oct 21 09:47:23 1991 Steve Chamberlain (steve at rtl.cygnus.com)
4039 * nm.c: now doesn't crash if a symbol with no section and no
4042 Thu Oct 17 15:25:50 1991 Per Bothner (bothner at cygnus.com)
4044 * Makefile.in, version.c: Bump to version 1.91.
4046 Wed Oct 16 11:45:36 1991 Per Bothner (bothner at cygnus.com)
4048 * Makefile.in, ar.c, bucomm.c, copy.c, cplus-dem.c, filemode.c,
4049 i960-pinsn.c, m68k-pinsn.c, nm.c, objdump.c, size.c, sparc-pinsn.c,
4050 * strip.c: Add or update Copyright notice.
4051 * TODO: Add note on 'nm -a'.
4052 * version.c: Update version number to 1.90.
4053 * Makefile.in: Fix making of documentation for dist.
4055 Tue Oct 15 00:17:17 1991 Per Bothner (bothner at cygnus.com)
4058 * Makefile.in: New kludgy rules for making a tarfile.
4059 * Makefile.in: Fix bindir path.
4061 Mon Oct 14 17:34:29 1991 Roland H. Pesch (pesch at cygnus.com)
4063 * Makefile.in: add targets binutils.mm, binutils.me
4065 Fri Oct 11 22:44:21 1991 John Gilmore (gnu at cygnus.com)
4067 * Makefile.in: Avoid Sun Make VPATH bugs by adding dependencies.
4069 Fri Oct 11 12:51:33 1991 Roland H. Pesch (pesch at cygnus.com)
4071 * Makefile.in: add target "binutils.ms"
4073 * binutils.texinfo: minor restructuring for texi2roff comfort.
4075 Fri Oct 11 04:12:28 1991 John Gilmore (gnu at cygnus.com)
4077 Restructure configuration scheme for bfd, binutils, ld.
4079 * include/sys/h-*.h: Move to bfd/hosts/h-*.h.
4080 * configure.in: Revise to symlink sysdep.h to ../bfd/hosts/h-xxx.h.
4081 Change some config names to match other dirs.
4082 * *.c: Include bfd.h before sysdep.h, so ansidecl and PROTO()
4084 * Makefile.in: Use -I. to get sysdep.h.
4086 Wed Oct 9 22:42:56 1991 Per Bothner (bothner at cygnus.com)
4088 * nm.c (print_symbols): Handle NULL name field of symbol.
4089 * Makefile.in: Removed spurious comment.
4091 Tue Oct 8 16:55:03 1991 Roland H. Pesch (pesch at cygnus.com)
4093 * binutils.texinfo: minor typos, phrasing, formatting fixes.
4095 Tue Oct 8 15:13:20 1991 Per Bothner (bothner at cygnus.com)
4097 * configure.in: Get host file from ../bfd/config, not config.
4098 * config/*: Remove config directory and its files.
4100 Tue Oct 8 13:58:59 1991 Roland H. Pesch (pesch at cygnus.com)
4102 * Makefile.in: new targets binutils.dvi, binutils.info
4104 * binutils.texinfo: remove most remaining FIXME's, delete
4105 references to __.SYMDEF by name
4108 Tue Oct 8 10:23:44 1991 Steve Chamberlain (steve at cygnus.com)
4110 * objdump.c (print_address) Print addresses nicely.
4112 Mon Oct 7 11:31:05 1991 Per Bothner (bothner at cygnus.com)
4114 * ar.c, Makefile.in, new files {is,not,maybe}-ranlib.c:
4115 Make two different binaries for ar and ranlib, instead of
4116 distinguishing them at run time using argv[0].
4117 (Old behavior is still available if you "make ar_with_ranlib",
4118 but it is not the default.)
4119 * ranlib.sh (new): An alternative one-line
4120 shell implementation of ranlib.
4122 Fri Oct 4 21:49:44 1991 John Gilmore (gnu at cygnus.com)
4124 * objdump.c: Cope with renames of a few BFD types & enums.
4126 Fri Oct 4 19:08:09 1991 Roland H. Pesch (pesch at cygnus.com)
4128 * binutils.texinfo: add new file (rudimentary docn)
4130 Mon Sep 30 12:30:39 1991 Per Bothner (bothner at cygnus.com)
4132 * config/hmake-news: Add new file (for Sony NEWSOS3).
4133 * bucomm.c (fatal): Conditionally compile fatal() depending on
4134 MISSING_VFPRINTF, and don't confuse the issue with NO_VARARGS.
4135 * objdump.c (dump_headers): Trivial output format change.
4136 * objdump.c (display_info): Loop over integers, not enums,
4137 to appease old compilers.
4139 Mon May 20 16:14:07 1991 Steve Chamberlain (steve at cygint.cygnus.com)
4141 *objdump.c *nm.c *copy.c :hanged some types to work with 64 bit object files
4143 Thu May 16 16:06:55 1991 Steve Chamberlain (steve at cygint.cygnus.com)
4145 * objdump.c (print_address): Make disasembled output more
4146 consistent with gdb and as: Add 0x when printing hex.
4147 Don't print extra leading zeros.
4148 Attempt to not print "filename.o".
4149 * objdump.c: Add some enum-to-int casts to accomodate old compilers.
4152 Fri May 3 22:21:44 1991 John Gilmore (gnu at cygint.cygnus.com)
4154 * copy.c: Change =& constructs to = &, since they confuse older
4162 version-control: never