binutils/Makefile.am

   1 ## Process this file with automake to generate Makefile.in
   2
   3 AUTOMAKE_OPTIONS = dejagnu no-dist foreign
   4 ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
   5
   6 SUBDIRS = doc po
   7
   8 tooldir = $(exec_prefix)/$(target_alias)
   9
  10 ## These aren't set by automake, because they appear in
  11 ## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and
  12 ## thus is not seen by automake.
  13 CC_FOR_BUILD = @CC_FOR_BUILD@
  14 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
  15
  16 YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
  17 YFLAGS = -d
  18 LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi`
  19
  20 # Automake 1.10+ disables lex and yacc output file regeneration if
  21 # maintainer mode is disabled.  Avoid this.
  22 am__skiplex =
  23 am__skipyacc =
  24
  25 WARN_CFLAGS = @WARN_CFLAGS@
  26 NO_WERROR = @NO_WERROR@
  27 AM_CFLAGS = $(WARN_CFLAGS)
  28 LIBICONV = @LIBICONV@
  29
  30 # these two are almost the same program
  31 AR_PROG=ar
  32 RANLIB_PROG=ranlib
  33
  34 # objcopy and strip should be the same program
  35 OBJCOPY_PROG=objcopy
  36 STRIP_PROG=strip-new
  37
  38 STRINGS_PROG=strings
  39
  40 READELF_PROG=readelf
  41
  42 ELFEDIT_PROG=elfedit
  43
  44 # These should all be the same program too.
  45 SIZE_PROG=size
  46 NM_PROG=nm-new
  47 OBJDUMP_PROG=objdump
  48
  49 # This is the demangler, as a standalone program.
  50 # Note: This one is used as the installed name too, unlike the above.
  51 DEMANGLER_PROG=cxxfilt
  52
  53 ADDR2LINE_PROG=addr2line
  54
  55 NLMCONV_PROG=nlmconv
  56 DLLTOOL_PROG=dlltool
  57 WINDRES_PROG=windres
  58 WINDMC_PROG=windmc
  59 DLLWRAP_PROG=dllwrap
  60
  61 SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT)
  62
  63 bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@
  64
  65 bin_SCRIPTS = @BUILD_INSTALL_MISC@
  66 EXTRA_SCRIPTS = embedspu
  67
  68 ## We need a special rule to install the programs which are built with
  69 ## -new, and to rename cxxfilt to c++filt.
  70 RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG)
  71 noinst_PROGRAMS = $(RENAMED_PROGS) @BUILD_MISC@
  72
  73 EXTRA_PROGRAMS = $(NLMCONV_PROG) srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG)
  74
  75 # Stuff that goes in tooldir/ if appropriate.
  76 TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy
  77
  78 BASEDIR = $(srcdir)/..
  79 BFDDIR = $(BASEDIR)/bfd
  80 INCDIR  = $(BASEDIR)/include
  81
  82 AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \
  83          @HDEFINES@ \
  84          @INCINTL@ \
  85          -DLOCALEDIR="\"$(datadir)/locale\"" \
  86          -Dbin_dummy_emulation=$(EMULATION_VECTOR)
  87
  88 HFILES = \
  89         arsup.h binemul.h bucomm.h budbg.h \
  90         coffgrok.h debug.h dlltool.h dwarf.h elfcomm.h nlmconv.h \
  91         objdump.h sysdep.h unwind-ia64.h windres.h winduni.h windint.h \
  92         windmc.h
  93
  94 GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h
  95 BUILT_SOURCES = $(GENERATED_HFILES)
  96
  97 CFILES = \
  98         addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \
  99         coffdump.c coffgrok.c cxxfilt.c \
 100         dwarf.c debug.c dlltool.c dllwrap.c \
 101         elfcomm.c emul_aix.c emul_vanilla.c filemode.c \
 102         ieee.c is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \
 103         nlmconv.c nm.c not-ranlib.c not-strip.c \
 104         objcopy.c objdump.c prdbg.c \
 105         od-xcoff.c od-macho.c \
 106         rclex.c rdcoff.c rddbg.c readelf.c rename.c \
 107         resbin.c rescoff.c resrc.c resres.c \
 108         size.c srconv.c stabs.c strings.c sysdump.c \
 109         syslex_wrap.c unwind-ia64.c elfedit.c version.c \
 110         windres.c winduni.c wrstabs.c \
 111         windmc.c mclex.c
 112
 113 GENERATED_CFILES = \
 114         arparse.c arlex.c sysroff.c sysinfo.c syslex.c \
 115         defparse.c deflex.c nlmheader.c rcparse.c mcparse.c
 116
 117 DEBUG_SRCS = rddbg.c debug.c stabs.c ieee.c rdcoff.c
 118 WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c
 119
 120 # Extra object files for objdump
 121 OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
 122
 123 # Code shared by all the binutils.
 124 BULIBS = bucomm.c version.c filemode.c
 125
 126 # Code shared by the ELF related programs.
 127 ELFLIBS = elfcomm.c
 128
 129 BFDLIB = ../bfd/libbfd.la
 130
 131 OPCODES = ../opcodes/libopcodes.la
 132
 133 LIBIBERTY = ../libiberty/libiberty.a
 134
 135 POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)
 136 po/POTFILES.in: @MAINT@ Makefile
 137         for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
 138           && mv tmp $(srcdir)/po/POTFILES.in
 139
 140 EXPECT = expect
 141 RUNTEST = runtest
 142
 143 CC_FOR_TARGET = ` \
 144   if [ -f $$r/../gcc/xgcc ] ; then \
 145     if [ -f $$r/../newlib/Makefile ] ; then \
 146       echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \
 147     else \
 148       echo $$r/../gcc/xgcc -B$$r/../gcc/; \
 149     fi; \
 150   else \
 151     if [ "@host@" = "@target@" ] ; then \
 152       echo $(CC); \
 153     else \
 154       echo gcc | sed '$(transform)'; \
 155     fi; \
 156   fi`
 157
 158 check-DEJAGNU: site.exp
 159         srcdir=`cd $(srcdir) && pwd`; export srcdir; \
 160         r=`pwd`; export r; \
 161         LC_ALL=C; export LC_ALL; \
 162         EXPECT=$(EXPECT); export EXPECT; \
 163         runtest=$(RUNTEST); \
 164         if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
 165           CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \
 166                 $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \
 167                         $(RUNTESTFLAGS); \
 168         else echo "WARNING: could not find \`runtest'" 1>&2; :;\
 169         fi
 170
 171 installcheck-local:
 172         /bin/sh $(srcdir)/sanity.sh $(bindir)
 173
 174 # There's no global DEPENDENCIES.  So, we must explicitly list everything
 175 # which depends on libintl, since we don't know whether LIBINTL_DEP will be
 176 # non-empty until configure time.  Ugh!
 177 size_DEPENDENCIES =      $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 178 objdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES) $(OBJDUMP_PRIVATE_OFILES)
 179 nm_new_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 180 ar_DEPENDENCIES =        $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 181 strings_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 182 strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 183 ranlib_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 184 cxxfilt_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 185 objcopy_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 186 nlmconv_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 187 srconv_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 188 sysdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 189 coffdump_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 190 dlltool_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 191 windres_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 192 windmc_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 193 addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 194 readelf_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
 195 elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY)
 196 dllwrap_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
 197
 198 LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
 199
 200 size_SOURCES = size.c $(BULIBS)
 201
 202 objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 203
 204 strings_SOURCES = strings.c $(BULIBS)
 205
 206 readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c $(ELFLIBS)
 207 readelf_LDADD   = $(LIBINTL) $(LIBIBERTY)
 208
 209 elfedit_SOURCES = elfedit.c version.c $(ELFLIBS)
 210 elfedit_LDADD = $(LIBINTL) $(LIBIBERTY)
 211
 212 strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 213
 214 nm_new_SOURCES = nm.c $(BULIBS)
 215
 216 objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS)
 217 EXTRA_objdump_SOURCES = od-xcoff.c
 218 objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
 219
 220 objdump.@OBJEXT@:objdump.c
 221 if am__fastdepCC
 222         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 223         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 224 else
 225 if AMDEP
 226         source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@
 227         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 228 endif
 229         $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 230 endif
 231
 232 cxxfilt_SOURCES = cxxfilt.c $(BULIBS)
 233
 234 ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \
 235         emul_$(EMULATION).c $(BULIBS)
 236 EXTRA_ar_SOURCES = $(CFILES)
 237 ar_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
 238
 239 ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \
 240         binemul.c emul_$(EMULATION).c $(BULIBS)
 241 ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
 242
 243 addr2line_SOURCES = addr2line.c $(BULIBS)
 244
 245 # The following is commented out for the conversion to automake.
 246 # This rule creates a single binary that switches between ar and ranlib
 247 # by looking at argv[0].  Use this kludge to save some disk space.
 248 # However, you have to install things by hand.
 249 # (That is after 'make install', replace the installed ranlib by a link to ar.)
 250 # Alternatively, you can install ranlib.sh as ranlib.
 251 # ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o
 252 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
 253 #       -rm -f $(RANLIB_PROG)
 254 #       -ln $(AR_PROG) $(RANLIB_PROG)
 255 #
 256 # objcopy and strip in one binary that uses argv[0] to decide its action.
 257 #
 258 #objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o
 259 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
 260 #       -rm -f $(STRIP_PROG)
 261 #       -ln $(OBJCOPY_PROG) $(STRIP_PROG)
 262
 263 sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 264         ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
 265         ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
 266         ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
 267
 268 sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 269         ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
 270
 271 sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
 272         $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
 273
 274 syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h
 275         $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
 276
 277 sysinfo.@OBJEXT@: sysinfo.c
 278         if [ -r sysinfo.c ]; then \
 279           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \
 280         else \
 281           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \
 282         fi
 283
 284 bin2c$(EXEEXT_FOR_BUILD): bin2c.c
 285         $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
 286
 287 embedspu: embedspu.sh Makefile
 288         awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
 289         chmod a+x $@
 290
 291 # We need these for parallel make.
 292 sysinfo.h: sysinfo.c
 293
 294 # Disable -Werror, if it has been enabled, since old versions of bison/
 295 # yacc will produce working code which contain compile time warnings.
 296 arparse.@OBJEXT@: arparse.c
 297 if am__fastdepCC
 298         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 299         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 300 else
 301 if AMDEP
 302         source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 303         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 304 endif
 305         $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 306 endif
 307
 308 arlex.@OBJEXT@: arlex.c
 309 if am__fastdepCC
 310         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 311         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 312 else
 313 if AMDEP
 314         source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 315         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 316 endif
 317         $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 318 endif
 319
 320 sysroff.@OBJEXT@: sysroff.c
 321 if am__fastdepCC
 322         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 323         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 324 else
 325 if AMDEP
 326         source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 327         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 328 endif
 329         $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 330 endif
 331
 332 defparse.@OBJEXT@: defparse.c
 333 if am__fastdepCC
 334         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 335         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 336 else
 337 if AMDEP
 338         source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 339         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 340 endif
 341         $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 342 endif
 343
 344 deflex.@OBJEXT@: deflex.c
 345 if am__fastdepCC
 346         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 347         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 348 else
 349 if AMDEP
 350         source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 351         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 352 endif
 353         $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 354 endif
 355
 356 nlmheader.@OBJEXT@: nlmheader.c
 357 if am__fastdepCC
 358         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR)
 359         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 360 else
 361 if AMDEP
 362         source='nlmheader.c' object='$@' libtool=no @AMDEPBACKSLASH@
 363         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 364 endif
 365         $(COMPILE) -c `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR)
 366 endif
 367
 368 rcparse.@OBJEXT@: rcparse.c
 369 if am__fastdepCC
 370         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 371         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 372 else
 373 if AMDEP
 374         source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 375         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 376 endif
 377         $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 378 endif
 379
 380 mcparse.@OBJEXT@: mcparse.c
 381 if am__fastdepCC
 382         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 383         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 384 else
 385 if AMDEP
 386         source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 387         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 388 endif
 389         $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 390 endif
 391
 392 rclex.@OBJEXT@: rclex.c
 393 if am__fastdepCC
 394         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
 395         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 396 else
 397 if AMDEP
 398         source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 399         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 400 endif
 401         $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
 402 endif
 403
 404 mclex.@OBJEXT@: mclex.c
 405 if am__fastdepCC
 406         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
 407         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 408 else
 409 if AMDEP
 410         source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 411         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 412 endif
 413         $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
 414 endif
 415
 416 srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)
 417 srconv.@OBJEXT@: sysroff.c
 418
 419 dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS)
 420 dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
 421
 422 dlltool.@OBJEXT@:
 423 if am__fastdepCC
 424         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 425         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 426 else
 427 if AMDEP
 428         source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@
 429         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 430 endif
 431         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 432 endif
 433
 434 rescoff.@OBJEXT@:
 435 if am__fastdepCC
 436         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 437         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 438 else
 439 if AMDEP
 440         source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 441         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 442 endif
 443         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 444 endif
 445
 446 coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)
 447
 448 sysdump_SOURCES = sysdump.c $(BULIBS)
 449 sysdump.@OBJEXT@: sysroff.c
 450
 451 # coff/sym.h and coff/ecoff.h won't be found by the automatic dependency
 452 # scripts, since they are only included conditionally.
 453 nlmconv.@OBJEXT@: nlmconv.c
 454 if am__fastdepCC
 455         ldname=`echo ld | sed '$(transform)'`; \
 456         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ \
 457           -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
 458         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 459 else
 460 if AMDEP
 461         source='nlmconv.c' object='$@' libtool=no @AMDEPBACKSLASH@
 462         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 463 endif
 464         ldname=`echo ld | sed '$(transform)'`; \
 465         $(COMPILE) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
 466 endif
 467
 468 nlmconv_SOURCES = nlmconv.c nlmheader.y $(BULIBS)
 469
 470 windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \
 471         winduni.c resres.c $(BULIBS)
 472 windres_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL) $(LIBICONV)
 473
 474 windmc_SOURCES = windmc.c mcparse.y mclex.c \
 475         winduni.c $(BULIBS)
 476 windmc_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL) $(LIBICONV)
 477
 478 dllwrap_SOURCES = dllwrap.c version.c
 479 dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL)
 480
 481
 482 EXTRA_DIST = arparse.c arparse.h arlex.c nlmheader.c sysinfo.c sysinfo.h \
 483         syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \
 484         mcparse.h mcparse.c embedspu.sh
 485
 486 diststuff: $(EXTRA_DIST) info
 487 all: info
 488
 489 # We extract version from bfd/configure.in, make sure to rerun configure
 490 # when BFD's version changes.
 491 CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in
 492
 493 DISTCLEANFILES = sysroff.c sysroff.h site.exp site.bak embedspu
 494
 495 MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \
 496   binutils.log binutils.sum abcdefgh*
 497 mostlyclean-local:
 498         -rm -rf tmpdir
 499
 500 .PHONY: install-exec-local
 501
 502 install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
 503         @list='$(RENAMED_PROGS)'; for p in $$list; do \
 504           if test -f $$p$(EXEEXT); then \
 505             echo " $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
 506             $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
 507           else :; fi; \
 508         done
 509         $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin
 510         for i in $(TOOL_PROGS); do \
 511           if [ -f $$i$(EXEEXT) ]; then \
 512             j=`echo $$i | sed -e 's/-new//'`; \
 513             k=`echo $$j | sed '$(transform)'`; \
 514             if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \
 515               rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 516               ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \
 517                 || $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 518             fi; \
 519           else true; \
 520           fi; \
 521         done