binutils/Makefile.am

   1 ## Process this file with automake to generate Makefile.in
   2
   3 AUTOMAKE_OPTIONS = dejagnu no-dist foreign
   4 ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
   5
   6 SUBDIRS = doc po
   7
   8 tooldir = $(exec_prefix)/$(target_alias)
   9
  10 ## These aren't set by automake, because they appear in
  11 ## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and
  12 ## thus is not seen by automake.
  13 CC_FOR_BUILD = @CC_FOR_BUILD@
  14 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
  15
  16 YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
  17 YFLAGS = -d
  18 LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi`
  19
  20 # Automake 1.10+ disables lex and yacc output file regeneration if
  21 # maintainer mode is disabled.  Avoid this.
  22 am__skiplex =
  23 am__skipyacc =
  24
  25 WARN_CFLAGS = @WARN_CFLAGS@
  26 NO_WERROR = @NO_WERROR@
  27 AM_CFLAGS = $(WARN_CFLAGS)
  28 LIBICONV = @LIBICONV@
  29
  30 # these two are almost the same program
  31 AR_PROG=ar
  32 RANLIB_PROG=ranlib
  33
  34 # objcopy and strip should be the same program
  35 OBJCOPY_PROG=objcopy
  36 STRIP_PROG=strip-new
  37
  38 STRINGS_PROG=strings
  39
  40 READELF_PROG=readelf
  41
  42 ELFEDIT_PROG=elfedit
  43
  44 # These should all be the same program too.
  45 SIZE_PROG=size
  46 NM_PROG=nm-new
  47 OBJDUMP_PROG=objdump
  48
  49 # This is the demangler, as a standalone program.
  50 # Note: This one is used as the installed name too, unlike the above.
  51 DEMANGLER_PROG=cxxfilt
  52
  53 ADDR2LINE_PROG=addr2line
  54
  55 NLMCONV_PROG=nlmconv
  56 DLLTOOL_PROG=dlltool
  57 WINDRES_PROG=windres
  58 WINDMC_PROG=windmc
  59 DLLWRAP_PROG=dllwrap
  60
  61 SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT)
  62
  63 bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@ @BUILD_INSTALL_MISC@
  64
  65 ## We need a special rule to install the programs which are built with
  66 ## -new, and to rename cxxfilt to c++filt.
  67 RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG)
  68 noinst_PROGRAMS = $(RENAMED_PROGS) @BUILD_MISC@
  69
  70 EXTRA_PROGRAMS = $(NLMCONV_PROG) srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG)
  71
  72 # Stuff that goes in tooldir/ if appropriate.
  73 TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy
  74
  75 BASEDIR = $(srcdir)/..
  76 BFDDIR = $(BASEDIR)/bfd
  77 INCDIR  = $(BASEDIR)/include
  78
  79 AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \
  80          @HDEFINES@ \
  81          @INCINTL@ \
  82          -DLOCALEDIR="\"$(datadir)/locale\"" \
  83          -Dbin_dummy_emulation=$(EMULATION_VECTOR)
  84
  85 HFILES = \
  86         arsup.h binemul.h bucomm.h budbg.h \
  87         coffgrok.h debug.h dlltool.h dwarf.h elfcomm.h nlmconv.h \
  88         sysdep.h unwind-ia64.h windres.h winduni.h windint.h \
  89         windmc.h
  90
  91 GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h
  92 BUILT_SOURCES = $(GENERATED_HFILES)
  93
  94 CFILES = \
  95         addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \
  96         coffdump.c coffgrok.c cxxfilt.c \
  97         dwarf.c debug.c dlltool.c dllwrap.c \
  98         elfcomm.c emul_aix.c emul_vanilla.c filemode.c \
  99         ieee.c is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \
 100         nlmconv.c nm.c not-ranlib.c not-strip.c \
 101         objcopy.c objdump.c prdbg.c \
 102         rclex.c rdcoff.c rddbg.c readelf.c rename.c \
 103         resbin.c rescoff.c resrc.c resres.c \
 104         size.c srconv.c stabs.c strings.c sysdump.c \
 105         unwind-ia64.c elfedit.c version.c \
 106         windres.c winduni.c wrstabs.c \
 107         windmc.c mclex.c
 108
 109 GENERATED_CFILES = \
 110         arparse.c arlex.c sysroff.c sysinfo.c syslex.c \
 111         defparse.c deflex.c nlmheader.c rcparse.c mcparse.c
 112
 113 DEBUG_SRCS = rddbg.c debug.c stabs.c ieee.c rdcoff.c
 114 WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c
 115
 116 # Code shared by all the binutils.
 117 BULIBS = bucomm.c version.c filemode.c
 118
 119 # Code shared by the ELF related programs.
 120 ELFLIBS = elfcomm.c
 121
 122 BFDLIB = ../bfd/libbfd.la
 123
 124 OPCODES = ../opcodes/libopcodes.la
 125
 126 LIBIBERTY = ../libiberty/libiberty.a
 127
 128 POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)
 129 po/POTFILES.in: @MAINT@ Makefile
 130         for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
 131           && mv tmp $(srcdir)/po/POTFILES.in
 132
 133 EXPECT = expect
 134 RUNTEST = runtest
 135
 136 CC_FOR_TARGET = ` \
 137   if [ -f $$r/../gcc/xgcc ] ; then \
 138     if [ -f $$r/../newlib/Makefile ] ; then \
 139       echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \
 140     else \
 141       echo $$r/../gcc/xgcc -B$$r/../gcc/; \
 142     fi; \
 143   else \
 144     if [ "@host@" = "@target@" ] ; then \
 145       echo $(CC); \
 146     else \
 147       echo gcc | sed '$(transform)'; \
 148     fi; \
 149   fi`
 150
 151 check-DEJAGNU: site.exp
 152         srcdir=`cd $(srcdir) && pwd`; export srcdir; \
 153         r=`pwd`; export r; \
 154         EXPECT=$(EXPECT); export EXPECT; \
 155         runtest=$(RUNTEST); \
 156         if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
 157           CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \
 158                 $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \
 159                         $(RUNTESTFLAGS); \
 160         else echo "WARNING: could not find \`runtest'" 1>&2; :;\
 161         fi
 162
 163 installcheck-local:
 164         /bin/sh $(srcdir)/sanity.sh $(bindir)
 165
 166 # There's no global DEPENDENCIES.  So, we must explicitly list everything
 167 # which depends on libintl, since we don't know whether LIBINTL_DEP will be
 168 # non-empty until configure time.  Ugh!
 169 size_DEPENDENCIES =      $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 170 objdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES)
 171 nm_new_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 172 ar_DEPENDENCIES =        $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 173 strings_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 174 strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 175 ranlib_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 176 cxxfilt_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 177 objcopy_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 178 nlmconv_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 179 srconv_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 180 sysdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 181 coffdump_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 182 dlltool_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 183 windres_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 184 windmc_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 185 addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 186 readelf_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
 187 elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY)
 188 dllwrap_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
 189
 190 LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
 191
 192 size_SOURCES = size.c $(BULIBS)
 193
 194 objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 195
 196 strings_SOURCES = strings.c $(BULIBS)
 197
 198 readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c $(ELFLIBS)
 199 readelf_LDADD   = $(LIBINTL) $(LIBIBERTY)
 200
 201 elfedit_SOURCES = elfedit.c version.c $(ELFLIBS)
 202 elfedit_LDADD = $(LIBINTL) $(LIBIBERTY)
 203
 204 strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 205
 206 nm_new_SOURCES = nm.c $(BULIBS)
 207
 208 objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS)
 209 objdump_LDADD = $(OPCODES) $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
 210
 211 objdump.@OBJEXT@:objdump.c
 212 if am__fastdepCC
 213         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 214         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 215 else
 216 if AMDEP
 217         source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@
 218         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 219 endif
 220         $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 221 endif
 222
 223 cxxfilt_SOURCES = cxxfilt.c $(BULIBS)
 224
 225 ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \
 226         emul_$(EMULATION).c $(BULIBS)
 227 EXTRA_ar_SOURCES = $(CFILES)
 228 ar_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
 229
 230 ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \
 231         binemul.c emul_$(EMULATION).c $(BULIBS)
 232 ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
 233
 234 addr2line_SOURCES = addr2line.c $(BULIBS)
 235
 236 # The following is commented out for the conversion to automake.
 237 # This rule creates a single binary that switches between ar and ranlib
 238 # by looking at argv[0].  Use this kludge to save some disk space.
 239 # However, you have to install things by hand.
 240 # (That is after 'make install', replace the installed ranlib by a link to ar.)
 241 # Alternatively, you can install ranlib.sh as ranlib.
 242 # ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o
 243 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
 244 #       -rm -f $(RANLIB_PROG)
 245 #       -ln $(AR_PROG) $(RANLIB_PROG)
 246 #
 247 # objcopy and strip in one binary that uses argv[0] to decide its action.
 248 #
 249 #objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o
 250 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
 251 #       -rm -f $(STRIP_PROG)
 252 #       -ln $(OBJCOPY_PROG) $(STRIP_PROG)
 253
 254 sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 255         ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
 256         ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
 257         ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
 258
 259 sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 260         ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
 261
 262 sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex.@OBJEXT@
 263         $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex.@OBJEXT@
 264
 265 syslex.@OBJEXT@: syslex.c sysinfo.h config.h
 266         if [ -r syslex.c ]; then \
 267           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) syslex.c ; \
 268         else \
 269           $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex.c ;\
 270         fi
 271
 272 sysinfo.@OBJEXT@: sysinfo.c
 273         if [ -r sysinfo.c ]; then \
 274           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \
 275         else \
 276           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \
 277         fi
 278
 279 bin2c$(EXEEXT_FOR_BUILD): bin2c.c
 280         $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
 281
 282 embedspu: embedspu.sh
 283         sed "s@^program_transform_name=@program_transform_name=$(program_transform_name)@" < $< > $@
 284         chmod a+x $@
 285
 286 # We need these for parallel make.
 287 sysinfo.h: sysinfo.c
 288
 289 # Disable -Werror, if it has been enabled, since old versions of bison/
 290 # yacc will produce working code which contain compile time warnings.
 291 arparse.@OBJEXT@: arparse.c
 292 if am__fastdepCC
 293         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 294         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 295 else
 296 if AMDEP
 297         source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 298         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 299 endif
 300         $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 301 endif
 302
 303 arlex.@OBJEXT@: arlex.c
 304 if am__fastdepCC
 305         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 306         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 307 else
 308 if AMDEP
 309         source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 310         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 311 endif
 312         $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 313 endif
 314
 315 sysroff.@OBJEXT@: sysroff.c
 316 if am__fastdepCC
 317         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 318         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 319 else
 320 if AMDEP
 321         source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 322         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 323 endif
 324         $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 325 endif
 326
 327 defparse.@OBJEXT@: defparse.c
 328 if am__fastdepCC
 329         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 330         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 331 else
 332 if AMDEP
 333         source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 334         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 335 endif
 336         $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 337 endif
 338
 339 deflex.@OBJEXT@: deflex.c
 340 if am__fastdepCC
 341         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 342         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 343 else
 344 if AMDEP
 345         source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 346         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 347 endif
 348         $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 349 endif
 350
 351 nlmheader.@OBJEXT@: nlmheader.c
 352 if am__fastdepCC
 353         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR)
 354         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 355 else
 356 if AMDEP
 357         source='nlmheader.c' object='$@' libtool=no @AMDEPBACKSLASH@
 358         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 359 endif
 360         $(COMPILE) -c `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR)
 361 endif
 362
 363 rcparse.@OBJEXT@: rcparse.c
 364 if am__fastdepCC
 365         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 366         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 367 else
 368 if AMDEP
 369         source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 370         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 371 endif
 372         $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 373 endif
 374
 375 mcparse.@OBJEXT@: mcparse.c
 376 if am__fastdepCC
 377         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 378         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 379 else
 380 if AMDEP
 381         source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 382         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 383 endif
 384         $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 385 endif
 386
 387 rclex.@OBJEXT@: rclex.c
 388 if am__fastdepCC
 389         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
 390         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 391 else
 392 if AMDEP
 393         source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 394         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 395 endif
 396         $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
 397 endif
 398
 399 mclex.@OBJEXT@: mclex.c
 400 if am__fastdepCC
 401         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
 402         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 403 else
 404 if AMDEP
 405         source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 406         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 407 endif
 408         $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
 409 endif
 410
 411 srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)
 412 srconv.@OBJEXT@: sysroff.c
 413
 414 dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS)
 415 dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
 416
 417 dlltool.@OBJEXT@:
 418 if am__fastdepCC
 419         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 420         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 421 else
 422 if AMDEP
 423         source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@
 424         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 425 endif
 426         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 427 endif
 428
 429 rescoff.@OBJEXT@:
 430 if am__fastdepCC
 431         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 432         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 433 else
 434 if AMDEP
 435         source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 436         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 437 endif
 438         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 439 endif
 440
 441 coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)
 442
 443 sysdump_SOURCES = sysdump.c $(BULIBS)
 444 sysdump.@OBJEXT@: sysroff.c
 445
 446 # coff/sym.h and coff/ecoff.h won't be found by the automatic dependency
 447 # scripts, since they are only included conditionally.
 448 nlmconv.@OBJEXT@: nlmconv.c
 449 if am__fastdepCC
 450         ldname=`echo ld | sed '$(transform)'`; \
 451         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ \
 452           -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
 453         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 454 else
 455 if AMDEP
 456         source='nlmconv.c' object='$@' libtool=no @AMDEPBACKSLASH@
 457         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 458 endif
 459         ldname=`echo ld | sed '$(transform)'`; \
 460         $(COMPILE) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
 461 endif
 462
 463 nlmconv_SOURCES = nlmconv.c nlmheader.y $(BULIBS)
 464
 465 windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \
 466         winduni.c resres.c $(BULIBS)
 467 windres_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL) $(LIBICONV)
 468
 469 windmc_SOURCES = windmc.c mcparse.y mclex.c \
 470         winduni.c $(BULIBS)
 471 windmc_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL) $(LIBICONV)
 472
 473 dllwrap_SOURCES = dllwrap.c version.c
 474 dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL)
 475
 476
 477 EXTRA_DIST = arparse.c arparse.h arlex.c nlmheader.c sysinfo.c sysinfo.h \
 478         syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \
 479         mcparse.h mcparse.c
 480
 481 diststuff: $(EXTRA_DIST) info
 482 all: info
 483
 484 # We extract version from bfd/configure.in, make sure to rerun configure
 485 # when BFD's version changes.
 486 CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in
 487
 488 DISTCLEANFILES = sysroff.c sysroff.h site.exp site.bak
 489
 490 MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \
 491   binutils.log binutils.sum abcdefgh*
 492 mostlyclean-local:
 493         -rm -rf tmpdir
 494
 495 .PHONY: install-exec-local
 496
 497 install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
 498         @list='$(RENAMED_PROGS)'; for p in $$list; do \
 499           if test -f $$p$(EXEEXT); then \
 500             echo " $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
 501             $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
 502           else :; fi; \
 503         done
 504         $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin
 505         for i in $(TOOL_PROGS); do \
 506           if [ -f $$i$(EXEEXT) ]; then \
 507             j=`echo $$i | sed -e 's/-new//'`; \
 508             k=`echo $$j | sed '$(transform)'`; \
 509             if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \
 510               rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 511               ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \
 512                 || $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 513             fi; \
 514           else true; \
 515           fi; \
 516         done